| 标准号 |
中文名 |
英文名 |
| NF T60-191-1993 |
石油产品和润滑脂.润滑脂存储时的脱油现象.压力下的静态条件 |
(Petroleum products and lubricating greases. Oil separation on storage of grease. Static conditions under pressure.) |
| NF C42-958-2002 |
高压预制开关设备和控制设备装置. 电压指示系统 |
(High-voltage prefabricated schwitchgear and controlgear assemblies - Voltage presence indicating systems.) |
| NF A09-590-1-2002 |
无损检验.磁性粒子试验.第1部分:一般原则 |
(Non-destructive testing - Magnetic particle testing - Part 1 : general principle.) |
| NF S31-062-2-1995 |
声学.听力保护器.第2部分:当听力保护器被破坏时影响A-重声压级的评定 |
(Acoustics. Hearing protectors. Part 2 : estimation of effective A-weighted sound pressure levels when hearing protectors are worn.) |
| NF K19-100-1997 |
银行业务.用不对称算法进行键控管理.第1部分:原理、程序和格式 |
(Banking. Key management by means of asymmetric algorithms. Part 1 : principles, procedures and formats.) |
| NF E23-030-1-2002 |
正齿轮和斜齿轮承载能力的计算.第1部分:基本原理、说明和一般影响因素 |
(Calculation of load capacity of spur and helical gears - Part 1 : basic principles, introduction and general influence factors.) |
| NF G46-002-2-2001 |
纺织机械.噪声试验规程.第2部分:纺纱准备和纺纱机械 |
(Textile machinery - Noise test code - Part 2 : spinning preparatory and spinning machinery.) |
| NF P90-131-2003 |
运动场表面.综合运动场表面伸展性能的测定 |
(Surfaces for sports areas - Determination of tensile properties of synthetic sports areas.) |
| NF C68-113/A11-2002 |
电缆管理用管道系统.第2-3部分:软性管道系统的特殊要求 |
(Conduit systems for cable management - Part 2-3 : particular requirements for flexible conduit systems.) |
| NF P21-354-1999 |
结构木材.胶合木材.强度分级和特征值测定 |
(Timber structures. Glued laminated timber. Strength classes and determination of characteristic values.) |
| NF C71-003-2003 |
灯具.第2-3部分:特殊要求.道路和街道照明用灯具 |
(Luminaires - Part 2-3 : particular requirements - Luminaires for road and street lighting.) |
| NF C26-221-1986 |
电绝缘材料的测试方法.评估恶劣的环境条件下使用的电绝缘材料的击穿和腐蚀电阻 |
(Methods of testing isulating materials. Test methods for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions.) |
| NF C42-501-1973 |
测量仪器.单相电压变压器.性能 |
(Measuring instruments. Single-phase voltage transformers. Characteristics.) |
| NF C01-826/A3-2000 |
电工词汇.第826章:建筑物的电气设施 |
(Electrotechnical Vocabulary - Chapter 826 : electrical installations of buildings.) |
| NF P15-910-2001 |
在非收集污水区域与家用污水净化有关的服务活动.自身污水处理装置诊断及其维修合同化指南 |
(Service activities relating to domestic sewerage purification in non-collective sewerage areas - Guidelines for a diagnosis of self-contained sewerage installations and for the contractualization of t) |
| NF C93-400-11-3-2002 |
电子设备连接器.试验和测量.第11-3部分:气候试验.试验11c:湿热、稳态 |
(Connectors for electronic equipment - Tests and measurements - Part 11-3 : climatic tests - Test 11c : damp heat, steady state.) |
| NF A85-009-6-2003 |
弧焊设备.第6部分:有限工作时间手动金属弧焊电源 |
(Arc welding equipment - Part 6 : limited duty manual metal arc welding power sources.) |
| NF C52-558-2-20-2002 |
电力变压器、供电设备及类似设备的安全.第2-20部分:小型感应器的特殊要求 |
(Safety of power transformers, power supply units and similar devices - Part 2-20 : particular requirements for small reactors.) |
| NF E58-150-2002 |
地面移动机械.产品识别编码系统 |
(Earth-moving machinery - Product identification numbering system.) |
| NF T34-750-1-2003 |
涂料和清漆.建筑用铝及铝合金涂层.第1部分:粉末涂覆材料制涂层 |
(Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1 : coatings prepared from powder coating materials.) |
| NF T58-005-1998 |
塑料.热固性材料试样的压缩模制 |
(Plastics. Compression moulding of test specimens of thermosetting materials.) |
| NF A36-204-3-1995 |
淬火和回火或沉淀硬化条件下制造高屈服结构钢的板材和宽扁材.第3部分:沉淀硬化钢交货条件 |
(Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Part 3 : delivery conditions for precipitation.) |
| NF B51-154-2002 |
人造木板.边缘弯曲特性的测定 |
(Wood-based panels - Determination of edgewise bending properties.) |
| NF V03-007-2002 |
食品.用直接外荧光过滤器技术/供氧盘计数法检测经辐照的食品.筛选法 |
(Foodstuffs - Detection of irradiated food using Direct Epifluorescent Filter Technique/Aerobic Plate Count (DEFT/APC) - Screening methods.) |
| NF E29-690/A1-1999 |
NF EN 849-1996的修改件1 |
() |
| NF C01-191/A1-1999 |
电工词汇.第191章:可靠性和服务质量 |
(Electrotechnical Vocabulary - Chapter 191 : dependability and quality of service.) |
| NF D36-500-1992 |
燃气器具用机械式恒温器 |
(Mechanical thermostats for gas-burning appliances.) |
| NF C01-461/A1-1999 |
电工词汇.第461章:电缆 |
(Electrotechnical Vocabulary - Chapter 461 : electric cables.) |
| NF C28-921-2003 |
磁性材料.开路中磁性材料矫顽力的测量方法 |
(Magnetic materials - Method of measurement of the coercivity of magnetic materials in an open circuit.) |
| NF C01-801-1999 |
电工词汇.第801章:声学和电声学 |
(Electrotechnical Vocabulary. Chapter 801 : acoustics and electroacoustics.) |
| NF C99-110-2002 |
对电子粒子监视(EAS)、射频识别(RFID)和类似应用的运作频率范围0Hz～10 GHz的装置产生的电磁场,人们受其辐 |
(Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 10 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) |
| NF X30-321-2001 |
环境标志和声明.自我环境声明(II型环境标志) |
(Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling).) |
| NF L54-565-1979 |
触头直径为１１mm的机场用连接器.１１５／２２０V三相交流电 |
(Aerodrome connectors, 11 mm diameter male contacts. 115/200 volts three phase alternating current.) |
| NF T94-305-1999 |
处理人类饮用水的化学品.过氧化氢 |
(Chemicals used for treatment of water intended for human consumption - Hydrogen peroxide.) |
| NF C42-102-1990 |
直接指示电测仪表及其附件.瓦特表和乏尔表的特殊规定 |
(Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3 : special requirements for wattmeters and varmeters.) |
| NF X45-301-2000 |
过滤盒.试验方法.通过第一泡点的测定的整体检验 |
(Filter cartridges - Test methods - Integrity inspection by determination of the first bubble point.) |
| NF C93-618-1-2003 |
经过质量评定的石英晶体元件.第1部分:总规范 |
(Quartz crystal units of assessed quality - Part 1 : generic specification.) |
| NF C20-151-1988 |
根据NFC20-150：护板与框架的尺寸.一般用柜的尺寸为4826毫米 |
(Dimensions of mechanical structures of the 482,6 mm (19 in) series. Part 2 : cabinets and pitches of rack structures.) |
| NF C96-013-6-12-2002 |
半导体器件的机械标准化.第6-12部分:表面安装半导体器件封装外形图绘制的一般规则.矩形小节距栅极矩阵列的 |
(Mechanical standardization of semiconductor devices - Part 6-12 : general rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for fine-pitch g) |
| NF P98-049-1994 |
手工制作混凝土成品.水泥预制作成的小地窖.特性和试验结果.试验、标记和验收条件 |
(Products in manufactured concrete. Precast concrete burial vaults. Characteristics and performances. Tests, marking, basis for acceptance.) |
| NF C93-840-1-43-2002 |
光学纤维.第1-43部分:测量方法和试验程序.数字孔径 |
(Optical fibres - Part 1-43 : measurement methods and test procedures - Numerical aperture.) |
| NF A09-205-3-1996 |
无损检验.射线照相的成像质量.第3部分:黑色金属的成像质量等级 |
(Non-destructive testing. Image quality of radiographs. Part 3 : image quality classes for ferrous metals.) |
| NF L31-217-1985 |
航空和航天系列.单排滚珠钢制耐腐蚀轴承尺寸系列0和2.尺寸与负载 |
(Aerospace series. Bearings, airframe rolling, rigid single row ball bearings, in corrosion resisting steel, diameter series 0 and 2, dimensions and loads.) |
| NF T70-526-2003 |
国防用高能材料.安全性、易损性.自燃的临界温度 |
(Energetic materials for defense - Safety, vulnerability - Cook-off critical temperature.) |
| NF L15-131-2002 |
航空航天系列.钛合金冷轧薄板材.厚度大于等于0.2 mm 和小于等于6 mm.尺寸 |
(Aerospace series - Sheets, cold rolled in titanium alloys - Thickness a more than or equal to 0,2 mm and less than or equal to 6 mm - Dimensions.) |
| NF E26-011-1981 |
焊接短链校准或未校准负载链条 |
(Welded short-link calibrated or non-calibrated loading chains.) |
| NF T70-524-2003 |
军用高能材料.安全与易损性.脆弱性 |
(Defense energetic materials - Safety, vulnerability - Friability.) |
| NF M07-041-1995 |
原油.水分测定.蒸馏法 |
(Crude petroleum. Determination of water. Distillation method.) |
| NF X06-041-4-1994 |
统计学应用.测量方法和测量结果的精确性.第4部分;标准测量方法的真实测定的基本方法 |
(Application of statistics. Accuracy (trueness and precision) of measurement methods and results. Part 4 : basic methods for the determination of the trueness of a standard measurement method.) |
| NF E31-511/A1-2002 |
未达到300KW净热输入的空间加热用的非家用燃气驱动对流空气加热器,无风扇协助传输可燃空气和/或可燃产品 |
(Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products.) |
| NF H00-044-1990 |
包装.纸材.用表面强度探测器测定纸张的水蒸气透过系数 |
(Packaging. Sheet materials. Determination of water vapour transmission rate through a sheet by a probe with surface strength.) |
| NF V03-915-1987 |
油料种子.用湿度计取样检验 |
(Oilseeds. Check of the calibration of moisture meters.) |
| NF U15-220/A1-2001 |
园艺机具.电驱动手操作和手持割草机和草坪棱边修剪机.机械安全 |
(Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety.) |
| NF B43-305-2003 |
高级工业陶瓷.在大气压力下高温时陶瓷复合物的机械特性.挠曲强度的测定 |
(Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength.) |
| NF X42-136-2000 |
生物技术.微生物安全室的性能标准 |
(Biotechnology - Performance criteria for microbiological safety cabinets.) |
| NF Z71-112-1992 |
信息技术.试验和办公系统.分布式办公应用模式.第2部分:识别目标参考和有关程序 |
(Information technlology. Test and office systems. Distributed-office-applications model. Part 2 : distinguished-object-reference and associated procedures.) |
| NF S31-906-1995 |
测量家用及类似用途电器发出的空气噪声的试验规范.第2部分:滚筒烘干机的特殊要求 |
(Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Part 2 : particular requirements for tumble-dryers.) |
| NF R16-330-2003 |
道路车辆.弧形底安装直列式喷油泵.安装尺寸 |
(Diesel engines - Cradle-mounted in-line fuel injection pumps - Mounting dimensions.) |
| NF C26-202-1975 |
绝缘材料.老化试验数据的统计分析 |
(Insulating materials statistical analysis of ageing test data.) |
| NF E90-327-1999 |
便携式手提动力工具.手柄振动测量.第10部分:步冲轮廓机和剪切机械 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Part 10 : nibblers and shears.) |
| NF Z83-546-1997 |
数字蜂窝通信系统(第2阶段).少数用户组(CUG)的增补服务.第2阶段(GSM 03.85) |
(Digital cellular telecommunications system (Phase 2). Closed User Group (CUG) supplementary services. Stage 2 (GSM 03.85).) |
| NF S94-103-2002 |
外科植入物.外科植入物的最小数据集 |
(Implants for surgery - Minimum data sets for surgical implants.) |
| NF C99-102-2002 |
评估人体暴露于电子粒子监测器(EAS)、无线电频率识别(RFID)及类似设备中使用装置的电磁场 |
(Evaluation of human exposure to electromagnetic fields from devices used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications.) |
| NF C97-160-3-1996 |
磁带声音录音和重播系统.第3部分:磁带上声音录制和重播设备的特性的测量方法 |
(Magnetic tape sound recording and reproducing sustems. Part 3 : methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape.) |
| NF T54-016-2-1999 |
供水用塑料管道系统.未增塑聚氯乙烯(PVC-U).第2部分:管子 |
(Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2 : pipes.) |
| NF M07-006-1997 |
石油产品.用四个可变等式法对柴油燃料十六烷指数的计算 |
(Petroleum products. Calculation of cetane index of middle-distillate fuels by the four-variable equation.) |
| NF A35-505-2-1993 |
可焊细晶粒结构钢热轧制品.第2部分:正火钢交货条件 |
(Hot-rolled products in weldable fine grain structural steels. Part 2 : delivery conditions for nomalized/normalized rolled steels.) |
| NF C20-738-1999 |
环境测试.第2部分:试验.试验 Z/AD:混合温度/湿度循环试验 |
(Environmental testing. Part 2 : tests. Test Z/AD : composite temperature/humidity cyclic test.) |
| NF P90-308-2003 |
地面无屏障私人或集体用游泳池的防护构件.安全保护层和保安装置.安全要求和试验方法 |
(Protective elements for in-ground, barrier-free, private or collective use swimming pools - Safety covers and securing devices - Safety requirements and test methods.) |
| NF C26-144-3-1997 |
电绝缘用复合柔性材料.第2部分:单项材料规范 |
(Combined flexible materials for electrical insulation - Part 3 : specifications for individual materials.) |
| NF E63-020-1998 |
机械压力.安全 |
(Mechanical presses - Safety.) |
| NF P62-303-1996 |
弹性地板覆盖物.有软木衬背的聚氯乙烯弹性地板覆盖物.规范 |
(Resilient floor coverings. Polyvinyl chloride floor coverings with cork-based backing. Specification.) |
| NF C66-231-1981 |
架空线路用绝缘子和器材.帽型和杆型玻璃绝缘子.特性和尺寸 |
(Insulators and fittings for overhead lines. Glass insulators of the cap and pin type. Characteristics. Dimensions.) |
| NF T48-101-1994 |
密封用石棉和橡胶压缩薄板.尺寸的测定? |
(Asbestos and rubber compressed sheets for seals. Measurement of dimensions.) |
| NF T57-216-1996 |
塑料管道系统.玻璃增强热固塑料管和配件.挠曲条件下部件内部耐化学侵蚀性的测定 |
(Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes and fittings. Determination of the resistance to chemical attack from the inside of a section in a deflected condition.) |
| NF C32-022-2003 |
电缆的火花试验方法 |
(Method for spark testing of cables.) |
| NF E63-600-1997 |
橡胶和塑料机械.注模机.安全要求 |
(Rubber and plastics machines - Injection moulding machines - Safety requirements.) |
| NF E18-017-2002 |
冷冻、深冻/速冻食品和冰淇淋运输、储存和配送的空气和产品温度测量用温度计.试验、性能、适合性 |
(Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Tests, performance, suitability) |
| NF J22-209-1995 |
小型船舶.抗燃烧燃料软管 |
(Small craft. Fire resistant fuel hoses.) |
| NF P92-800-1-2002 |
建筑产品和建筑部件的燃烧性能分类.第1部分:用燃烧试验反应得出的试验数据进行分类 |
(Fire classification of construction products and building elements - Part 1 : classification using test data from reaction to fire tests.) |
| NF A91-219-2002 |
热喷涂.熔喷和电弧喷涂用线材、杆材和软线.分类.技术支持条件 |
(Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions.) |
| NF C27-105-1991 |
新聚丁烯的规范 |
(Specification for unused polybutenes.) |
| NF E29-731-2001 |
可移动的气瓶.不可再填充的金属气瓶 |
(Transportable gas cylinders - Non refillable metallic gas cylinders.) |
| NF E05-053-2-2002 |
产品几何量技术规范(GPS).表面结构:轮廓法.测量标准.第2部分:软件测量标准 |
(Geometrical Product Specifications (GPS) - Surface texture : profile method - Measurement standards - Part 2 : software measurement standards.) |
| NF C20-700-1995 |
环境试验.第1部分:通用导则 |
(Environmental testing. Part 1 : general and guidance.) |
| NF M88-729-2003 |
自闭合式LPG气瓶阀规范和试验 |
(Specification and testing of LPG cylinder valves - Self closing.) |
| NF A49-540-1-1997 |
非合金细晶粒结构钢的冷成形焊接结构空心型材.第1部分:交货技术要求 |
(Cold form welded structural hollow sections of non-alloy and fine grain steels. Part 1 : technical delivery requirements.) |
| NF C92-297/A1-1999 |
电视广播传输接收机的推荐测量方法.第5部分:使用NICAM双声道数字音频系统对多声道电视接收机的电气测量 |
(Recommended methods of measurement on receivers for television broadcast transmissions - Part 5 : electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system.) |
| NF C91-004-15-1998 |
电磁兼容性.第4部分:试验和测量方法.第15节:闪光仪表.功能和设计规范 |
(Electromagnetic compatibility (EMC). Part 4 : testing and measurement techniques. Section 15 : flickermeter. Functional and design specifications.) |
| NF E65-100-10-2000 |
手持非电动工具.安全要求.第10部分:压缩动力工具 |
(Hand-held non electric power tools - Safety requirements - Part 10 : compression power tools.) |
| NF U65-052-2000 |
食品加工设备.模具.安全和卫生要求 |
(Food processing machinery - Moulders - Safety and hygiene requirements.) |
| NF E66-017-2003 |
有直柄和莫氏锥度柄的莫氏锥度和米制锥度精加工铰刀 |
(Finishing reamers for morse and metric tapers, with parallel shanks and morse taper shanks.) |
| NF C18-403-2002 |
带电作业.工具,设备和器械术语 |
(Live working - Terminology for tools, equipment and devices.) |
| NF C01-561-1991 |
电工技术词汇.第561章:频率控制与选择用压电器件 |
(Electrotechnical vocabulary. Chapter 561 : piezoelectric devices for frequency control and selection.) |
| NF C10-103-1994 |
短路电流.效应计算.第1部分:定义和计算方法 |
(Short-circuit currents. Calculation of effects. Part 1 : definitions and calculation methods.) |
| NF C27-228-3-1-2002 |
电工用非纤维素纸.第3部分:单项材料规范.第1活页:填充玻璃砂纸 |
(Non-cellulosic papers for electrical purposes - Part 3 : specifications for individual materiels - Sheet 1 : filled glass paper.) |
| NF L22-546-1975 |
内锁紧系留螺母.单耳单埋孔.国际单位米制螺纹 |
(Self-locking anchor nuts, single lug with countersunk rivet hole. Sim thread (rech.).) |
| NF E58-090-1998 |
土方机械.拖拉机式推土机、平地机、铲运机刃口.主要形状和基本尺寸 |
(Earth-moving machinery. Cutting edges used on tractor-dozers, graders and scrapers. Principal shapes and basic dimensions.) |
| NF A82-101-1992 |
点焊设备.阳锥形塞规范和阴锥形环规 |
(Spot welding equipment. Taper plug gauges and taper ring gauges.) |
| NF Z88-790-2002 |
通用个人电信(UPT).个人电信第2段通用结构格式的安全性规范 |
(Universal Personal Telecommunication (UPT) - Security architecture for UPT phase 2 - Specifications.) |
| NF U51-510-2002 |
农业灌溉设备.有喷头或喷雾咀的中心轴和横向移动排灌机械.分配水均匀性的测定 |
(Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution.) |
| NF C98-011-1999 |
与远程通信网络相连接的设备的特殊安全要求(EN 41003) |
(Particular safety requirements for equipment to be connected to telecommunication networks.) |
| NF A49-300-1-2003 |
精密装置用钢管.交货技术条件.第1部分:无缝冷拉管 |
(Steel tubes for precision applications - Technical delivery conditions - Part 1 : seamless cold drawn tubes.) |
| NF E62-275-1985 |
组合机床通用部件.整体导轨立柱 |
(Modular units for machine tool construction. Integral way columns.) |
| NF S31-111-1992 |
声学.由信息设备和办公室设备发出的高频噪音的测定 |
(Acoustics. Measurement of high-frequency noise emitted by computer and business equipment.) |
| NF E29-690-1996 |
可运输气瓶.气瓶阀.规范和型式试验(EN 849) |
(Transportable gas cylinders. Cylinder valves. Specification and type testing.) |
| NF Z15-005-1996 |
识别卡.录制技术.第4部分:只读磁道位置.1磁道和2磁道 |
(Identification cards. Recording technique. Part 4 : location of read-only magnetic tracks, tracks 1 and 2.) |
| NF S93-103-2003 |
输血、输液和注射瓶用铝盖.一般要求和试验方法 |
(Aluminium caps for transfusion, infusion and injection bottles - General requirements and test methods.) |
| NF P98-852-3-2003 |
敷路料.试验方法.第3部分:用Vialit板冲击试验方法测定粘合剂集料的粘着性 |
(Surface dressing - Test method - Part 3 : determination of binder aggregate adhesivity by the Vialit plate shock test method.) |
| NF P16-340-2003 |
车辆和行人区的排水通道.分类、设计、试验要求、标记和合格评定 |
(Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity.) |
| NF L90-273-2002 |
航天产品保证.人造航天器机舱使用的材料和安装物品的脱气产品的测定 |
(Space product assurance - The determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment.) |
| NF A91-701-1999 |
表面处理.工厂水箱,管道和设备的识别.安全标志 |
(Surface treatment. Identification of workshop tanks, piping and equipment. Safety marking.) |
| NF A84-419-1997 |
气焊设备.能承受最大检验设计气压为450巴的压缩和液化气用橡胶和塑料软管组件 |
(Gas welding equipment. Rubber and plastic hoses assembled for compressed or liquified gases up to a maximum design pressure of 450 bar.) |
| NF P51-501-2001 |
独立的工业烟囱.第1部分:一般要求 |
(Free-standing industrial chimneys - Part 1 : general requirements.) |
| NF A49-201-6-2002 |
焊接压力钢管.交货技术条件.第6部分:规定低温特性的埋弧焊接非合金钢管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6 : submerged arc welded non-alloy steel tubes with specified low temperature properties.) |
| NF S78-501-3-2003 |
护耳器.一般技术要求.第3部分:固定在工业防护帽上的耳套 |
(Hearing protectors - General requirements - Part 3 : ear-muffs attached to an industrial safety helmet.) |
| NF C20-755-1994 |
基本环境试验规程.第2部分:试验.第55节:试验Ee及导则:颤动 |
(Basic environmental testing procedures. Part 2 : tests. Test Ee and guidance bounce.) |
| NF C51-111-1999 |
旋转电机.第1部分:额定功率和性能 |
(Rotating electrical machines - Part 1 : rating and performance.) |
| NF C03-260-2001 |
说明书的准备.结构、内容和表达方式 |
(Preparation of instructions - Structuring, content and presentation.) |
| NF T47-305-3/A1-2003 |
弹性密封件.给水排水用管道连接密封件的材料要求.第3部分:硫化橡胶多孔材料 |
(Elastomeric seals - Material requirements for joint seals used in water and drainage applications - Part 3 : cellular materials of vulcanized rubber.) |
| NF C45-252-1983 |
继电器.接线端的标志 |
(Electrical relays. Terminal marking.) |
| NF P84-124-1-1999 |
防水用柔性薄板.第1部分:屋面防水用沥青片.拉伸特性的测定 |
(Flexible sheets for waterproofing - Part 1 : bitumen sheets for roof waterproofing - Determination of tensile properties.) |
| NF T90-325-2000 |
水质.通过两栖类幼虫评定遗传毒性 |
(Water quality - Evaluation of the genotoxicity with larvae of amphibians (Xenopus leavis, Pleurodeles waltl).) |
| NF C93-430-7-1998 |
印制板用频率低于3MHz的连接器.第7部分:经质量评定的包括具有一般匹配特性的固定和活动连接器的8路连接器的 |
(Connectors for frequencies below 3 MHz for use with printed boards. Part 7 : detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality.) |
| NF L54-610-1978 |
低压压缩空气输送用电气开关 |
(CONNECTOR,LOW PRESSURE COMPRESSED AIR STARTING.) |
| NF M88-731-2003 |
液化石油气(LPG)罐阀和配件的规范和试验 |
(Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings.) |
| NF C96-005-1/A1-2002 |
分立式半导体器件和集成电路.第5-1部分:光电器件.通则 |
(Discrete semiconductor devices and integrated circuits - Part 5-1 : optoelectronic devices - General.) |
| NF L51-153-1980 |
Ｂ型电压调整器 |
(VOLTAGE REGULATOR,TYPE B.) |
| NF C45-205-3-2001 |
继电器.第22-3部分:测量继电器和保护设备的电磁干扰试验.电磁场辐射干扰试验 |
(Electrical relays - Part 22-3 : electrical disturbance tests for measuring relays and protection equipment - Radiated electromagnetic field disturbance tests.) |
| NF C47-110/A1-1989 |
NF C 47-110-1981的补充件1 |
() |
| NF G35-046-1998 |
编织地毯.除针织起毛地毯外的针织地毯的分级 |
(Textile floor coverings. Tests using the Lisson Tretrad machine.) |
| NF P78-103-1995 |
建筑玻璃.基本钠钙硅酸玻璃产品.第2部分:浮法(平板玻璃) |
(Glass in building. Basic soda lime silicate glass products. Part 2 : float glass.) |
| NF B53-624-2-1999 |
圆木和锯材.允许偏差和优选尺寸.第2部分:硬木锯材 |
(Round and sawn timber. Permitted deviations and preferred sizes. Part 2 : hardwood sawn timber.) |
| NF C97-183-2002 |
视频压缩12.65mmD-9型元件格式525/60和625/50(数字S)的数字视频录制 |
(Digital video recording with video compression 12,65 mm - Type D-9 component format 525/60 and 625/50 (digital S).) |
| NF C86-617-1981 |
电子元件.ＣＥＮＥＬＥＣ质量保证体系.特定外壳温度高频放大晶体二极管.特殊规范 |
(Harmonized system of quality assessment for electronic components. Blank detail specification. Case-rated bipolar transistors for high frequency application.) |
| NF U47-101-2001 |
动物健康分析方法.鸟类中沙门菌的隔绝和识别 |
(Animal health analysis methods - Isolation and identification of Salmonella in birds.) |
| NF S71-601-1994 |
救生衣和专用浮力工具.浮力工具.50N(欧洲标准EN 393) |
(Lifejackets and personal buoyancy aids. Buoyancy aids 50 N.) |
| NF S10-113-1997 |
光学和光学仪器.激光和与激光相关的设备.光学激光组件光吸收性测试 |
(Optics and optical instruments. Lasers and laser-related equipment. Test method for absorptance of optical laser components.) |
| NF F67-155/A1-2003 |
铁路设施.机车车辆用电子设备 |
(Railway applications - Electronic equipment used on rolling stock.) |
| NF C93-400-5-2-2002 |
电子设备连接器.试验和测量.第5-2部分:载流量试验.试验5b:电流-温度下降 |
(Connectors for electronic equipment - Tests and measurements - Part 5-2 : current-carrying capacity tests - Test 5b : current-temperature derating.) |
| NF S77-126/A1-2002 |
激光工作场所用屏蔽物.安全要求和试验 |
(Screens for laser working places - Safety requirements and testing.) |
| NF V04-155-2003 |
乳和乳制品.羊乳中脂肪含量的测定.奶油酸度测量法 |
(Milk and milk products - Determination of fat content of sheep milk - Acido-butyrometric method.) |
| NF C54-143-1993 |
电力系统用串联电容器.第1部分:一般性能、试验和额定值.安全要求.安装要求 |
(Serie capacitors for power systems. Part 1 : general performance, testing and rating. Safety requirements. Guide for installation.) |
| NF C27-132-1994 |
含硅变压器液体的维护指南 |
(Guide for the maintenance of silicone transformer liquids.) |
| NF E29-319-2003 |
最大工作压力为16bar及以下的配气系统用阀.性能要求 |
(Valves for gas distribution systems with maximum operating pressure less than or equal 16 bar - Performance requirements.) |
| NF P18-939-1998 |
混凝土结构的修复和保护产品和系统.试验方法.热膨胀系数的测定 |
(Products and systems for the protection and repair of concrete structures. Test methods. Determination of the coefficient of thermal expansion.) |
| NF C27-210-1979 |
绝缘液体的相对介电常数.介电损耗和电阻系数（直流电）的测定 |
(Measurement of relative permittivity dielectric dissipation factor and D.C. Resistivity of insulating liquids.) |
| NF C91-002-4-2003 |
电磁兼容性(EMC).第2-4部分:环境.工业设施中低频传导干扰的兼容性水平 |
(Electromagnetic compatibility (EMC) - Part 2-4 : environment - Compatibility levels in industrial plants for low-frequency conducted disturbances.) |
| NF P19-829-3-1998 |
预制混凝土产品.玻璃增强混凝土的试验方法.喷雾GRC纤维含量的测定 |
(Precast concrete products. Test method for glass-fibre reinforced cement. Part 3 : measuring the fibre content of sprayed GRC.) |
| NF Z86-231-2003 |
电信.电视系统.家用视频节目传送控制系统规范(PDC) |
(Telecommunications - Television systems - Specification of the domestic video Programme Delivery Control system (PDC).) |
| NF C97-142-5-1996 |
专用磁带宽度为6.3mm的数字磁带录音机磁带盘对磁带盘系统.第5部分:磁带盘 |
(Digital audio tape recorder reel-to-reel system, using 6,3 mm magnetic tape, for professional use. Part 5 : reels.) |
| NF F63-307-1989 |
铁路车辆.电气和电子设备铠装电缆用导线和电缆 |
(ROLLING STOCK. CONDUCTORS AND CABLES USED FOR THE CABLING OF SHEATHED ELECTRIC AND ELECTRONIC EQUIPMENT.) |
| NF F00-010-1973 |
通用铁路设备.铰接用特殊公差与配合.间隙配合 |
(RAILWAY MATERIAL IN GENERAL. TOLERANCES AND FITTINGS USED,PARTICULARLY,FOR ARTICULATIONS. FITTINGS WITH CLEARANCES.) |
| NF Z63-419-2003 |
信息技术.自动识别和数据采集技术.条形码数字成像和印刷性能检测 |
(Information technology - Automatic identification and data capture techniques - Bar code digital imaging and printing performance testing.) |
| NF E66-512-1989 |
铣刀寿命试验.第2部分:端铣 |
(TOOL LIFE TESTING IN MILLING. PART 2 : END MILLING.) |
| NF A51-204-1998 |
铜和铜合金.导架用带材 |
(Copper and copper alloys - Strip for lead frames.) |
| NF E29-200-1-2002 |
法兰及其连接件.按PN标注的管、阀门、配件和附件用圆形法兰.钢法兰 |
(Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1 : steel flanges.) |
| NF L10-060-2002 |
航空航天系列.金属半成品.测量形状偏差的方法 |
(Aerospace series - Semi-finished metallic products - Methods of measuring form deviations.) |
| NF X10-301-2002 |
明渠液体流量测量.速度面积法 |
(Measurement of liquid flow in open channels - Velocity-area methods.) |
| NF E86-512-1-2002 |
冷凝容器.防超压安全设施.第1部分:冷凝设备的安全阀 |
(Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1 : safety valves for cryogenic service.) |
| NF T56-122/A1-1997 |
NF T56-122-1984的补充件 A1 |
() |
| NF Z15-034-1996 |
信息技术.识别卡.有触点的集成电路卡.第4部分:交换的内部命令 |
(Information technology. Identification cards. Integrated circuit(s) cards with contacts. Part 4 : interindustry commands for interchange.) |
| NF C32-201-3-1998 |
额定电压450/750V(包括450/750V)以下的聚氯乙烯绝缘电缆.第3部分:固定金属线用无外包层电缆 |
(Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 3 : non-sheathed cables for fixed wiring.) |
| NF P75-401-2-2001 |
DTU 45.1.建筑工程.私人合同.冷动用建筑物和可调温房屋的热绝缘.第2部分:特殊条款 |
(DTU45.1 - Building works - Private contracts - Thermal insulation of refrigerating buildings and of regulated temperature premises - Part 2 : special clauses.) |
| NF J38-540-2002 |
船舶和造船技术.载油舱用压力/真空阀 |
(Ships and marine technology - Pressure/vacuum valves for cargo tanks.) |
| NF C31-092-2-1995 |
绕组线的封装.第2部分:圆桶形输出线轴.第2节:由热塑性材料制成的可回收使用的绕线轴规范 |
(Packaging of winding wires. Part 2 : cylindrical barreled delivery spools. Section 2 : specification for returnable spools made from thermoplastic material.) |
| NF S77-111/A1-2002 |
人眼防护.防激光辐射滤光镜和护目镜(激光护目镜) |
(Personal eye-protection - Filters and eye-protectors against laser radiation (laser eye-protectors).) |
| NF P98-052-2002 |
预制混凝土产品.预制混凝土窗台 |
(Prefabricated concrete products - Prefabricated concrete window sills.) |
| NF T72-072-1997 |
木材防腐剂.沥青浸渍油以及用该油的浸渍木材.取样和分析方法.第3部分:沥青浸渍油的苯并芘含量的测定 |
(Wood preservative. Creosote and creosoted timber. Methods of sampling and analysis. Part 3 : determination of the benzo(a)pyrene content of creosote.) |
| NF L31-558-2002 |
航空和航天系列.室温条件下高负荷、轻系列、带自动润滑层的耐蚀钢球面轴承.尺寸和负载 |
(Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions andd loads.) |
| NF C43-805-1994 |
激光产品的安全.第1部分:设备分类、要求和用户指南 |
(Safety of laser products - Part 1 : equipment classification, requirements and user`s guide.) |
| NF C01-195/A1-2001 |
电工词汇.第195章:电机的接地和保护 |
(Electrotechnical Vocabulary - Chapter 195 : earthing and protection against electric shock.) |
| NF A49-201-4-2002 |
焊接压力钢管.交货技术条件.第4部分:规定低温特性的电焊非合钢管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4 : electric welded non-alloy steel tubes with specified low temperature properties.) |
| NF A32-201-1997 |
铸造.球墨铸铁 |
(Founding. Spheroidal graphite cast irons.) |
| NF D32-308-2002 |
使用固体燃料的包括明火的嵌入式采暖炉.要求和试验方法 |
(Inset appliances including open fires fired by solid fuels - Requirements and test methods.) |
| NF C20-003-6-1993 |
环境条件的分类.第3部分:环境参数及其严密性的组别分类.船舶环境 |
(Classification of environmental conditions. Part 3 : classification of groups of environmental parameters and their severities. Ship environment.) |
| NF B54-114-2-1996 |
碎料板.规范.第2部分:用于干燥条件下的通用板材要求 |
(Particleboards. Specifications. Part 2 : requirements for general purpose boards for use in dry conditions.) |
| NF A36-204-1-1995 |
淬火和回火或沉淀硬化条件下制造高屈服结构钢的板材和宽扁材.第1部分:一般交货条件 |
(Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Part 1 : general delivery conditions.) |
| NF P94-048-1996 |
土壤:调查和试验.碳酸盐含量的测定 |
(Soil : investigation and testing - Determination of the carbonate content - Calcimeter method.) |
| NF D25-101-7-2003 |
与食品接触的材料和物品.塑料.第7部分:利用袋全浸渍在液态食品中塑料全淅出量的试验方法 |
(Materials and articles in contact with foodstuffs - Plastics - Part 7 : test methods for overall migration into aqueous food simulants using a pouch.) |
| NF P20-602-1999 |
窗、门、百叶窗.防弹性.要求和分类 |
(Windows, doors, shutters and blinds. Bullet resistance. Requirements and classification.) |
| NF C32-201-5-1998 |
额定电压450/750V(包括450/750V)以下的聚氯乙烯绝缘电缆.第5部分:软电缆 |
(Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 5 : flexible cables.) |
| NF T60-116-2002 |
石油产品.碳残渣的测定.康拉逊(Conoadson)法 |
(Petroleum products - Determination of carbon residue - Conradson method.) |
| NF H31-343-2000 |
总容量为17-230升的鼓形钢桶用插入法兰型封闭系统 |
(Inserted flange type closure systems for steel drums with a total capacity of 17 l to 230 l.) |
| NF L22-458-2000 |
航空用螺栓和螺母.槽顶(有槽)普通厚度六角头螺母.左旋ISO M或ISO MJ螺纹.４H公差级 |
(Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, left-hand ISO M or ISO MJ threads, 4H tolerance class.) |
| NF K20-001-1/A1-2002 |
安全存储装置.防盗检验的要求,分类和方法.第1部分:钱柜,保险库门和保险库 |
(Secure storage units - Requirements, classification and methods of tests resistance to burglary - Part 1 : safes, strongroom doors and strongrooms.) |
| NF X06-041-3-1994 |
统计学的应用.测量方法和测量结果的精确性.第3部分;标准测量方法的精密度的间歇性测量 |
(Application of statistics - Accuracy (trueness and precision) of measurement methods and results - Part 3 : intermediate measures of the precision of a standard measurement method.) |
| NF E25-111-2001 |
凸头内六角螺钉 |
(Hexalobular socket cheese head screws.) |
| NF E29-783-2002 |
可运输的气瓶.溶解乙炔用气瓶.填充时的检查 |
(Transportable gas cylinders - Cylinders for dissolved acetylene - Inspection at time of filling.) |
| NF S93-031-2-1997 |
一次性使用、无菌管内导管.第2部分:血管造影术用导管 |
(Sterile, single-use intravascular catheters - Part 2 : angiographic catheters.) |
| NF P18-621-2-1999 |
集料一般特性的试验.第2部分:实验室样品还原法 |
(Tests for general properties of aggregates. Part 2 : methods for reducing laboratory samples.) |
| NF P21-301-1998 |
木材结构.建筑用木材和胶合板.垂直于纹理的机械特性和剪切强度的测定 |
(Timber structures. Structural timber and glued laminated timber. Determination of shear strength and mechanical properties perpendicular to the grain.) |
| NF E52-017-2000 |
起重机.使用和试验的信息.第2部分:标记 |
(Cranes - Information for use and testing - Part 2 : marking.) |
| NF T50-050-2-2002 |
塑料.符号和缩略语.第2部分:填充剂及加强材料 |
(Plastics - Symbols and abbreviated terms - Part 2 : fillers and reinforcing materials.) |
| NF C42-103-1990 |
直接指示电测仪表其及附件.频率计用特殊规定 |
(Direct acting indicating analogue electrical measuring instruments and their accessories. Part 4 : special requirements for frequency meters.) |
| NF C93-909-052-3-2002 |
纤维光学内连接器件和无源元件性能标准.第052-3部分:U类用单膜光纤和尾式固定衰减器.非环境控制 |
(Fibre optic interconnecting devices and passive components performance standard - Part 052-3 : single-mode fibre, pigtailed-style fixed attenuators for category U - Uncontrolled environment.) |
| NF C27-229-1985 |
绝缘油、纸张及油浸纸板中形成水含量的测定 |
(Determination of water in insulating oils, and in oil-impregnated paper and pressboard.) |
| NF J95-043-2002 |
小型船舶.磁罗盘 |
(Small craft - Magnetic compasses.) |
| NF P19-829-6-1998 |
预制混凝土产品.玻璃纤维增强水泥的试验方法.第6部分:干密度测定和浸入法水吸收的测定 |
(Precast concrete products. Test method for glass-fibre reinforced cement. Part 6 : determination of the absorption of water by immersion and determination of the dry density.) |
| NF A89-101-4-2000 |
焊接.金属材料焊接的推荐方法.第4部分:铝和铝合金的电弧焊 |
(Welding - Recommendations for welding of metallic materials - Part 4 : arc welding of aluminium and aluminium alloys.) |
| NF G62-114-2002 |
鞋类.鞋帮的试验方法.高温特性 |
(Footwear - Test methods for uppers - High temperature behaviour.) |
| NF V08-600-2000 |
食品和动物饲料的微生物学.在活的有壳鱼体内原始大肠杆菌的计数法.MPN技术 |
(Microbiology of foods and foodstuffs products - Enumeration of presumptive Escherichia coli in living shell fishes - MPN technique.) |
| NF C42-120-1993 |
电测量仪器.X-Y记录仪 |
(Electrical measuring instruments. X-y recorders.) |
| NF G35-050-1998 |
编织地毯.对改造的滚桶试验对切割边缘损害抗性的测定 |
(Textile floor coverings. Determination of resistance to damage at cut edges using the modified Vettermann drum test.) |
| NF C27-230-1986 |
电工技术用流体.在电压和电离作用下，液化绝缘气体 |
(Fluids for electrotechnical applications. Gassing of insulating liquids under electrical stress and ionization.) |
| NF C46-520-1993 |
工业过程控制阀.第8部分:噪声问题.第2节:通过控制阀的液压流动产生的噪声的实验室测量 |
(Industrial-process control valves. Part 8 : noise considerations. Section 2 : laboratory measurement of noise generated by hydrodynamic flow through control valves.) |
| NF P75-407-2002 |
建筑物用的绝热制品.工厂制作的酚泡沫(PF)产品.规范 |
(Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification.) |
| NF C41-101-1995 |
高电压试验技术.第1部分:一般定义和试验要求 |
(High-voltage test techniques. Part 1 : general definitions and test requirements.) |
| NF C42-690-1988 |
脉冲技术与设备.脉冲的测量与分析.综述 |
(Pulse techniques and apparatus. Pulse terms and definitions.) |
| NF P84-126-1-1999 |
防水用柔性薄板.第1部分:屋面防水用沥青片.连接处耐剪切性测定 |
(Flexible sheets for waterproofing - Part 1 : bitumen sheets for roof waterproofing - Determination of shear resistance of joints.) |
| NF C53-225-1985 |
传送直流高压用的半导体整流管的试验 |
(Testing of semiconductor valves for high-voltage D.C. Power transmission.) |
| NF P98-846-5-2003 |
松散的和液力粘合的混合料.第5部分:实验室参考密度和水含量的测试方法.振动台 |
(Unbound and hydraulically bound mixtures - Part 5 : test methods for laboratory reference density and water content - Vibrating table.) |
| NF E10-201-1-1999 |
几何产品规范(GPS).工件的测量检验和测量设备.第1部分:用规范对一致性或不一致性进行检验的判定规则 |
(Geometrical product specification (GPS). Inspection by measurement of workpieces and measuring equipments. Part 1 : decision rules for proving conformance or non-conformance with specifications.) |
| NF M07-047-1996 |
石油产品.柴油燃料氧化稳定性的测定 |
(Petroleum products. Determination of the oxidation stability of middle-distillate fuels.) |
| NF E26-010-1981 |
提升设备用焊接短环链和特短环链校准负载链条 |
(Welded short-link and very short-link calibrated loading chains used for lifting appliances.) |
| NF C82-101-3-3-2002 |
行为语言.第3-3部分:VHDL的综合 |
(Behavioural languages - Part 3-3 : synthesis in VHDL.) |
| NF E25-136-1986 |
紧固件.螺杆.A和B级产品 |
(Fasteners. Threaded rods. Product grades A and B.) |
| NF S76-013-2002 |
呼吸防护装置.口罩组件.要求、检验和标记 |
(Respiratory protective devices - Mouthpiece assemblies - Requirements, testing, marking.) |
| NF Z83-545-1997 |
数字蜂窝通信系统(第2阶段).多呼叫方(MPTY)的增补服务.第2阶段(GSM 03.84) |
(Digital cellular telecommunications system (Phase 2). Multi Party (MPTY) supplementary services. Stage 2 (GSM 03.84).) |
| NF X50-136-2002 |
质量和/或环境管理体系审核指南 |
(Guidelines for quality and/or environmental management systems auditing.) |
| NF T94-303-1999 |
处理人类饮用水的化学品.氯酸钠 |
(Chemicals used for treatment of water intended for human consumption - Sodium chlorite.) |
| NF S97-036-2002 |
天然乳胶橡胶阴茎套.要求和试验方法 |
(Natural latex rubber condoms - Requirements and test methods.) |
| NF L22-435-2000 |
带标准凸起度扁六角头普通螺母.ISO M或ISO MJ螺纹.按直径4H5H或5H进行公差分类 |
(Nuts, hexagonal, plain, reduced height, normal across flats, ISO M or ISO MJ threads 4H5H or 5H tolerance class according to diameter.) |
| NF C31-662-1995 |
特种绕组线规范.第12部分:聚乙烯醇乙醛漆包圆铜绕组线,120级 |
(Specifications for particular types of winding wires. Part 12 : polyvinyl acetal enamelled round copper wire, class 120.) |
| NF T34-201-3-2001 |
涂料和清漆.外部木材的涂覆材料和涂覆系统.第3部分:自然气候试验 |
(Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3 : natural weathering test.) |
| NF C93-537-1-6-2002 |
通信电缆.试验方法规范.第1-6部分:电气试验方法.电磁特性 |
(Communication cables - Specifications for test methods - Part 1-6 : electrical test methods - Electromagnetic performance.) |
| NF C74-210/A1-2000 |
医用电气设备.第2部分:遥控自动驱动式γ射线后装设备安全性的特殊要求 |
(Medical electrical equipment - Part 2 : particular requirements for the safety of remote-controlled automatically-driven gamma-ray after-loading equipment.) |
| NF P16-101-1999 |
用于液压交换管道,排水系统和废水组份测定的一般要求.(欧洲标志EN773) |
(General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers.) |
| NF T94-255-1997 |
生活用水处理用化学制品.二氧化碳 |
(Chemicals used for treatment of water intended for human consumption. Carbon dioxide.) |
| NF C27-227-1981 |
绝缘油中专用抗氧化添加剂含量的检测和测定 |
(Detection and determination of specified anti-oxidant additives in insulating oils.) |
| NF T94-302-1999 |
处理人类饮用水的化学品.次氯酸钠 |
(Chemicals used for treatment of water intended for human consumption - Sodium hypochlorite.) |
| NF B51-190-3-1998 |
木质人造板.取样、切割和检验.第3部分:人造板发货的检验 |
(Wood-based panels. Sampling, cutting and inspection. Part 3 : inspection of a consignment of panels.) |
| NF B54-115-1997 |
定向纤维板.定义、分类和规范 |
(Oriented Strand Boards (OSB). Definitions, classification and specifications.) |
| NF Z82-458-2002 |
综合业务数字网(ISDN).远程帧处理程序接口(RFHI)规范 |
(Integrated Service Digital Network (ISDN) - Specification of the Remote Frame Handler Interface (RFHI).) |
| NF P62-124-1997 |
弹性地板铺面.软木块表面密度的测定 |
(Resilient floor coverings. Determination of apparent density of agglomerated cork.) |
| NF B53-601-12-2001 |
圆木和锯木.术语.第12部分:附加及通用术语 |
(Round and sawn timber - Terminology - Part 12 : Additional terms and general index.) |
| NF P82-210-1998 |
电梯制造和安装的安全规则.第1部分:电梯 |
(Safety rules for the construction and installation of lifts. Part 1 : electric lifts.) |
| NF B10-619-1999 |
天然石材的试验方法.耐盐结晶化的测定? |
(Natural stone test methods. Determination of resistance to salt crystallisation.) |
| NF L22-434-2000 |
航空用螺栓和螺母.标准厚度、标准凸起度六角头普通螺母.ISO螺纹左旋４H公差级 |
(Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, left-hand ISO M or ISO MJ threads, 4H tolerance class.) |
| NF C93-840-1-51-2002 |
光学纤维.第1-51部分:测量方法和试验程序.干热 |
(Optical fibres - Part 1-51 : measurement methods and test procedures - Dry heat.) |
| NF L52-250-603-2003 |
航空航天系列.飞行器用电缆.试验方法.第603部分:耐湿电弧痕迹性 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603 : resistance to wet arc tracking.) |
| NF C61-125-1995 |
设备开关.第2-5部分:转换选择开关的特殊要求 |
(Switches for appliances. Part 2-5 : particular requirements for change-over selectors.) |
| NF U44-302-2002 |
土壤改良剂和生长媒介.王水可溶性元素的萃取 |
(Soil improvers and growing media - Extraction of aqua regia soluble elements.) |
| NF P18-315-1996 |
混凝土、灰泥和薄浆混合料.试验方法.第6部分:红外线分析 |
(Admixtures for concrete, mortar and grout. Test methods. Part 6 : infrared analysis.) |
| NF J95-063-2003 |
小艇.艇内柴油发动机.装在发动机上的燃油和电气元件 |
(Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components.) |
| NF P50-746-2000 |
建筑物结构中的热桥.线性热阀门.简化方法和无效阀门 |
(Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values.) |
| NF P62-102-2002 |
弹性和叠层地板覆盖物.小脚轮椅试验 |
(Resilient and laminate floor coverings - Castor chair test.) |
| NF L95-013-2003 |
航天工程.航天环境 |
(Space engineering - Space environment.) |
| NF S52-388-2001 |
游泳池器械.第1部分:一般安全要求和检验方法 |
(Swimming pool equipment - Part 1 : general safety requirements and test methods.) |
| NF V03-709-1996 |
谷类试验筛 |
(Test sieves for cereals.) |
| NF P99-101-2000 |
交通信号灯控制器.功能安全要求 |
(Traffic signal controllers - Functional safety requirements.) |
| NF E04-601-1-1989 |
技术制图.数控绘图机.第1部分:词汇 |
(Technical drawings. Numerically controlled draughting machines. Part 1 : vocabulary.) |
| NF E60-116-1999 |
卧式镗铣床的试验条件.准确度试验.第2部分:台式机床 |
(Test conditions for boring and milling machines with horizontal spindle. Testing of the accuracy. Part 2 : table-type machines.) |
| NF E58-013-1995 |
土方机械.控制装置的最佳操作和活动范围 |
(Earth-moving machinery. Zones of comfort and reach for controls.) |
| NF V04-172-3-2003 |
奶和奶制品.测定硝酸盐和亚硝酸盐含量.第3部分:利用镉还原及在线渗析流量注入法(常规法) |
(Milk and milk products - Determination of nitrate and nitrite contents - Part 3 : method using cadmium reduction and flow injection analysis with in-line dialysis (Routine methode).) |
| NF A49-296-1983 |
钢管.带质量要求的熔焊非合金或合金钢制等径或缩径焊接三通管.尺寸.交货技术条件 |
(Steel tubes. Unalloyed or alloy steel butt welding tees made by saw process with equal or reduced branches, with quality requirements. Dimensions. Technical delivery conditions.) |
| NF C90-130-3-1999 |
电缆分布网络用同轴电缆.第3部分:室外下悬电缆分规范 |
(Coaxial cables used in cabled distribution networks - Part 3 : sectional specification for outdoor drop cables.) |
| NF C32-027-1996 |
电缆绝缘和护套材料通用试验方法.第1部分:一般应用.第4节:低温试验 |
(Insulating and sheating materials of electric cables. Common test methods. Part 1 : general application. Section 4 : test at low temperature.) |
| NF P21-358-1995 |
木结构.机械性能和密度特征值的测定 |
(Structural timber. Determination of characteristic values of mechanical properties and density.) |
| NF V08-033-2001 |
食品和动物饲料的微生物学.psychrotrophic微生物计数的水平方法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of psychrotrophic microorganisms.) |
| NF C26-302-1990 |
电绝缘材料热稳定性的测定.试验准则选择 |
(Determination of thermal endurance properties of electrical insulating materials. Choice of test criteria.) |
| NF D63-006-1997 |
成卷墙纸.氯乙烯单体和甲醛释放的重金属及其他元素移动的测定 |
(Wall coverings in roll form. Determination of migration of heavy metals and certain other elements, of vinyl chloride monomer and of formaldehyde release.) |
| NF P16-103-1999 |
用于气压交换管道,排水系统和废水组份测定的一般要求.(欧洲标志EN1293) |
(General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers.) |
| NF C82-101-1-2002 |
设计自动化.第1部分:VHDL语言参考手册 |
(Design automation - Part 1 : VHDL language reference manual.) |
| NF T94-206-1999 |
饮用水处理用化学物质.硫酸铜 |
(Chemicals used for treatment of water intended for human consumption. Copper sulfate.) |
| NF P18-314-1996 |
混凝土、灰泥和薄浆混合料.试验方法.第5部分:毛细吸收的测定 |
(Admixtures for concrete, mortar and grout. Test methods. Part 5 : determination of capillary absorption.) |
| NF C04-201-1985 |
电工技术.颜色的标志 |
(Code for designation of colours.) |
| NF C61-350-2001 |
家用和类似用途的器具连接器.第1部分:一般要求 |
(Appliance couplers for household and similar general purposes - Part 1 : general requirements.) |
| NF P16-321-1/A3-1999 |
雨水和污水管道用陶土管、配件及管连接件.第1部分:要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1 : requirements.) |
| NF T60-233-2000 |
动物脂肪和植物脂肪.脂肪酸甲醇脂的制备 |
(Animal and vegetable fats and oils - Preparation of methyl esters of fatty acids.) |
| NF A91-052-2000 |
金属防腐蚀.铁或钢上辅助处理的锌电镀涂层 |
(Corrosion protection of metals - Electrodeposited coatings of zinc with supplementary treatment on iron or steel.) |
| NF C53-222-1987 |
功率电子设备.直流电输出的稳压功率源? |
(Power electronics. Stabilized power supplies,D.C. output.) |
| NF H95-113-2002 |
连续搬运设备和系统.散装物料机械搬运设备(不包括固定运送装置)的安全和制造、安装及使用(EMC)要求 |
(Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors.) |
| NF C26-310-23-2003 |
电气绝缘结构.热评定规程.第23部分:通用深槽模型的特殊要求.线绕电气绝缘结构(EIS) |
(Electrical insulation systems - Procedures for thermal evaluation - Part 23 : specific requirements for general purpose, tall-channel model - Wire-wound electrical insulation system (EIS).) |
| NF U02-052-1-2003 |
高离地间隙拖拉机.倾斜稳定性.翻车时保护.第1部分:稳定性.计算方法 |
(High-clearance tractors - Stability on slopes and protection in event of overturning - Part 1 : stability - Calculation methods.) |
| NF E60-276-1990 |
机床.噪音测量的常规工作条件.带锯刀的研磨机切断机床 |
(Machine-tools. Conventional working conditions for measurement of noise. Grinder-cutting-off machines with cuttersaws.) |
| NF Z15-006-1996 |
识别卡.录制方式.第5部分:读-写磁道的位置.磁道3 |
(Identification cards. Recording technique. Part 5 : location of read-write magnetic track, track 3.) |
| NF E04-703-1-1989 |
书写和符号用模板.第1部分:一般规定和识别标志 |
(Templates for lettering and symbols. Part 1 : general principles and identification markings.) |
| NF F10-420-1991 |
铁路车辆.牵引车辆和拖车用车钩、牵引装置及驱动齿轮装置 |
(Railway rolling stock. Coupling, traction and driving gears for tractive and hauled stock.) |
| NF C42-163-1993 |
直流电位计 |
(Direct-current potentiometers.) |
| NF A04-503-1988 |
铝、铜、镍及其合金制半成品.粒径的测定.铝和铝合金 |
(Semi-products made from aluminium, copper, nickel and their alloys. Determination of grain size. Aluminium and aluminium alloys.) |
| NF C97-305-1996 |
音响系统设备.第5部分:扩音器 |
(Sound system equipment. Part 5 : loudspeakers.) |
| NF C53-211-2000 |
半导体交直流转换器.一般要求和线性交直流转换器.第1-1部分:规范和基本要求 |
(Semiconductor convertors - General requirements and line commutated convertors - Part 1-1 : specification of basic requirements.) |
| NF E04-701-1-1989 |
用绘图墨水的手持式描图纸专用笔的管状笔尖.第1部分:定义、尺寸、命名及标志 |
(Tubular tips for hand-held technical pens using india ink on tracing paper. Part 1 : definitions, dimensions, designation and marking.) |
| NF D63-011-1999 |
成卷墙纸.尺寸,垂直性,吸水性和可洗性的测定(EN 12956) |
(Wallcoverings in roll form. Determination of dimensions, straightness, spongeability and washability.) |
| NF P25-509-2002 |
百叶窗和防护板.抗温升性.产品的空气渗透性分级 |
(Shutters and blinds - Additional thermal resistance - Allocation of a class of air permeability to a product.) |
| NF L54-002-120-2002 |
航空航天系列.电气及光学连接元件.试验方法.第6317部分:光学元件.易燃性 |
(Aerospace series - Elements of electrical and optical connection - Test methods - Part 6317 : optical elements - Flammability.) |
| NF Z85-356-2-2002 |
综合业务数字网(ISDN).No7信令(SS7).国际接口用用户部分(ISUP)版本4.第2部分:ISDN 辅助业务 |
(Integrated Services Digital Network (ISDN) - Signalling System N o 7 (SS7) - ISDN user part (ISUP) version 4 for the international interface - Part 2 : ISDN supplementary services.) |
| NF B53-649-2003 |
木质拼花地板、木镶板和贴面层.几何特征的测定 |
(Wood and parquet flooring and wood panelling and cladding - Determination of geometrical characteristics.) |
| NF T90-358-2003 |
水质.电捕鱼取样 |
(Water quality - Fish sampling with electricity.) |
| NF A91-455-17-2001 |
铝及铝合金.阳极氧化.第17部分:电介质击穿潜能的测定 |
(Aluminium and aluminium alloys - Anodizing - Part 17 : determination of electric breakdown potential.) |
| NF P62-302-1996 |
弹性地板覆盖物.有泡沫层的聚氯乙烯弹性地板覆盖物.规范 |
(Resilient floor coverings. Polyvinyl chloride floor coverings with foam layer. Specification.) |
| NF E64-604-1997 |
木工机械的安全.表面刨平和去厚度机床? |
(Safety of woodworking machines - Surface planing and thicknessing machines.) |
| NF T34-721-11-2002 |
涂料和清漆.外部砖石和混凝土用涂层材料和涂层系统.第11部分:检验前调和方法 |
(Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 11 : methods of conditioning before testing.) |
| NF C26-287-1998 |
干燥,固体绝缘材料.云母基绝缘材料.一般规定 |
(Dry, solid insulating materials. Resistance test to high-voltage, low-current arc discharges.) |
| NF S93-031-3-1997 |
一次性使用、无菌管内导管.第3部分:中心静脉导管 |
(Sterile, single-use intravascular catheters - Part 3 : central venous catheters.) |
| NF E25-124-1994 |
一字槽半沉头螺钉(普通头型).产品等级A |
(Slotted raised countersunk head screws (common head style). Product grade A.) |
| NF F61-012-1998 |
铁路车辆.电感器和电缆的选择标准 |
(Railway rolling stock. Selection criteria for electrical conductors and cables.) |
| NF P02-200-2-1999 |
建筑制图.标识系统.第2部分:房间名称与号码(EN 4157-2) |
(Construction drawings. Designation systems. Part 2 : room names and numbers.) |
| NF P18-622-9-1999 |
集料几何特性的试验.第9部分:细集料的评估.次甲基蓝试验 |
(Tests for geometrical properties of aggregates. Part 9 : assessment of fines. Methylene blue test.) |
| NF P50-742-1996 |
热绝缘.散热传递.物理的量值和定义 |
(Thermal insulation. Heat transfer by radiation. Physical quantities and definitions.) |
| NF Z88-449-2000 |
商业电信.特殊质量声音的宽带2线模拟出租线(A2S).连接特性和网络接口展示 |
(Business TeleCommunications (BTC) - Special quality voice bandwidth 2-wire analogue leased line (A2S) - Connection characteristics and network interface presentation.) |
| NF C93-859-2-2001 |
系列规范:光学架空通讯电缆 |
(Family Specification : optical aerial telecommunication cables.) |
| NF P21-357-1995 |
建筑用木料.分级.目检强度分级标准的要求 |
(Structural timber. Grading. Requirements for visual strength grading standards.) |
| NF C42-105-1990 |
直接指示电测仪表及其附件.欧姆表和电导计用的特殊规定 |
(Direct acting indicating analogue electrical measuring insutrments and their accessories. Part 6 : special requirements for ohmmeters (impedance meters) and conductance meters.) |
| NF C01-714-1990 |
电工词汇.第714章:开关和信号(通信用) |
(Electrotechnical vocabulary. Chapter 714 : switching and signalling (in tlecommunication).) |
| NF C73-895-2002 |
家用和类似用途电器的安全.第2-95部分:住宅用垂直移动汽车门驱动装置的特殊要求 |
(Safety of household and similar electrical appliances - Part 2-95 : particular requirements for drives for vertically moving garage doors for residential use.) |
| NF P62-134-1997 |
弹性地板覆盖物.抗烟头燃烧性的测定 |
(Resilient floor coverings. Determination of resistance to stubbed and burning cigarettes.) |
| NF X45-303-2000 |
过滤盒.试验方法.过滤效率和滞流能力的测定 |
(Filter cartridges - Test methods - Measurement of filtration efficiency and retention capacity.) |
| NF C48-324-1-2002 |
警报系统.安全系统用CCTV监视系统.第4-1部分:黑白监视器 |
(Alarm systems - CCTV surveillance systems for use in security applications - Part 4-1 : black and white monitors.) |
| NF P82-702-1998 |
电磁兼容性.电梯,升降梯和载人电梯产品的家庭标准.免疫性 |
(Electromagnetic compatibility. Product family standard for lifts, escalators and passenger conveyors. Immunity.) |
| NF C01-581-1982 |
电工技术词汇.第581章:电子设备用电机元件 |
(Electrotechnical vocabulary. Chapter 581 : electromechanical components for electronic equipment.) |
| NF C47-741-1993 |
家用和类似用途的自动电控制设备.第2部分:能量调节器的特殊要求 |
(Automatic electrical controls for household and similar use. Part 2 : particular requirements for energy regulators.) |
| NF P84-123-1-1999 |
防水柔性板.第1部分:屋顶防水用沥青板.钉体抗撕裂性的测定 |
(Flexible sheets for waterproofing - Part 1 : bitumen sheets for roof waterproofing - Determination of resistance to tearing (nail shank).) |
| NF C20-737-1987 |
气侯的基本试验和机械坚固性的基本试验.试验方法.Fdc 试验.在宽带上的随机振动.重复性低 |
(Basic environmental testing procedures. Test methods. Test Fdc : random vibration wide band. Reproductibility low.) |
| NF E74-353-1-2002 |
螺钉和螺母用装配工具.机动旋转头.第1部分:一字槽螺钉旋具 |
(Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1 : screwdriver bits for slotted head screws.) |
| NF C46-640-1993 |
工业过程测量与控制.系统评定用系统性能的评价.第1部分:一般考虑和方法学 |
(Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Part 1 : general considerations and methodology.) |
| NF C93-903-16-1998 |
光纤连接装置和无源元件.基本试验和测量过程.第3-16部分:检验和测量.球面刨光金属箍的半径 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-16 : examinations and measurements. Endface radius of spherically polished ferrules.) |
| NF A36-322-2000 |
连续热镀锌的结构钢制的板材和带钢.交货的技术条件 |
(Continuously hot-dip zinc coated structural steels strip and sheet - Technical delivery conditions.) |
| NF C42-360/A2-2001 |
交流电量转换成模拟或数字信号用电测量换能器 |
(Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals.) |
| NF S71-604-1994 |
救生衣和专用浮力工具.150N救生衣 |
(Lifejackets and personal buoyancy aids. Lifejackets 150 N.) |
| NF T56-130/A1-1997 |
NF T56-130-1984的补充件 A1 |
() |
| NF E48-702-1993 |
液压传动.滤油器元件和滤油器腔.特性和要求 |
(Hydraulic fluid power. Filter elements and filter housings. Characteristics, requirements.) |
| NF Z15-002-1996 |
识别卡.录制方法:第1部分:压纹 |
(Identification cards. Recording technique. Part 1 : embossing.) |
| NF A35-558-1999 |
具有特殊高温和/或低温性能的紧固件用钢和镍合金 |
(Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties.) |
| NF T66-050-2002 |
沥青和沥青粘合剂.用蒸发法从沥青乳胶中回收粘合剂 |
(Bitumen and bituminous binders - Recovery of binder from bitumen emulsions by evaporation.) |
| NF A35-520-1-1995 |
非合金钢热轧板桩.第1部分:交货技术条件 |
(Hot rolled sheet piling of non alloy steels. Part 1 : technical delivery conditions.) |
| NF T60-121-2003 |
石油产品.石油蜡和矿脂常规溶点的测定 |
(Petroleum products - Determination of the conventional melting point of petroleum waxes and petroleum jellies.) |
| NF S77-106-2002 |
个人眼防护.红外滤光镜.透射要求和应用推荐 |
(Personal eye-protection - Infrared filters - Transmittance requirements and recommended use.) |
| NF E64-607-2-1999 |
木材加工机械的安全.环形锯,第2部分:水平束板锯和垂直板锯(EN 1870-2) |
(Safety of woodworking machines - Circular sawing machines - Part 2 : Horizontal beam panel saws and vertical panels saws.) |
| NF D27-403-2003 |
大开口除外的信箱.室外安装 |
(Letter boxes others than those with large opening - Outdoor installations.) |
| NF P78-474-2002 |
建筑物用玻璃.隔热玻璃组件.第4部分:封边密封件的物理特性的试验方法 |
(Glass in building - Insulating glass units - Part 4 : methods of test for the physical attributes of edge seals.) |
| NF T76-408-2002 |
水硬地面平整和/或找平填料的试验方法.粘接强度测定 |
(Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength.) |
| NF P16-125-1997 |
下水管道的铺设和检验 |
(Construction and testing of drains and sewers.) |
| NF A50-638-9-2001 |
铝和铝合金.挤制棒材/杆材、管及型材.第9部分:型材的尺寸和形状公差 |
(Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9 : profiles, tolerances on dimensions and form.) |
| NF M88-723-2002 |
高达(和包括)13M |
(Inspection and requalification of LPG tanks up to and including 13 m3 underground.) |
| NF C41-102-1995 |
高压试验技术.第2部分：测量系统 |
(High-voltage test techniques. Part 2 : measuring systems.) |
| NF E29-745-2000 |
便携式气瓶.可再充气的便携式焊接铝合金气瓶的设计和结构规范 |
(Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders.) |
| NF E29-781-2000 |
可传送的气瓶.压缩空气瓶(不包括乙炔).灌充时的检查 |
(Transportable gas cylinders - Cylinders for compressed gases (excluding acetylene) - Inspection at time of filling.) |
| NF P20-603-1999 |
窗、门、百叶窗.防弹性.试验方法 |
(Windows, doors, shutters and blinds. Bullet resistance. Test method.) |
| NF L54-002-077-2002 |
航空航天系列.电气和光学连接的元件.试验方法.第507部分:电镀多孔性 |
(Aerospace series - Elements of electrical and optical connection - Test methods - Part 507 : plating porosity.) |
| NF C26-963-1-1995 |
加感印制电路板用涂覆层(保形敷层).第3部分:专用材料规范.活页1:通用(I类)和高可靠性(II类)涂层 |
(Coatings for loaded printed wire boards (conformal coatings). Part 3 : specifications for individual materials. Sheet 1 : coatings for general purpose (class i) and for high reliability (class ii).) |
| NF P18-901-1-1998 |
混凝土结构的修复和保护用产品和系统.定义、要求、质量控制和合格评定.第1部分:定义 |
(Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Part 1 : definitions.) |
| NF P25-602-2001 |
外遮帘和遮板.对风负载的耐性.试验方法 |
(External blinds and shutters - Resistance to wind loads - Method of testing.) |
| NF C26-170-1984 |
固体绝缘材料.电气用刚纸.一般要求 |
(Solid insulating materials. Vulcanized fibre for electrical purposes. General requirements.) |
| NF T94-304-1999 |
处理人类饮用水的化学品.盐酸 |
(Chemicals used for treatment of water intended for human consumption- Hydrochloric acid.) |
| NF A32-410-2000 |
铸造.铸铁的耐磨性 |
(Founding - Abrasion resistant cast irons.) |
| NF C26-280-1978 |
绝缘材料的试验方法.用液体提取法测定绝缘材料中离子杂质的试验方法 |
(Methods of testing insulating materials. Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids.) |
| NF C53-224-1982 |
电源用电子设备.交流输出稳压电源 |
(Power electronics. Stabilized power supplies A.C. output.) |
| NF C61-410-1992 |
家用和类似用途电器过电流保护用断路器 |
(Circuit-breakers for overcurrent protection for household and similar installations.) |
| NF C46-502-1993 |
工业过程用调节阀.第1部分:术语和概论? |
(Industrial-process control valves. Part 1 : control valve terminology and general considerations.) |
| NF S77-121-2000 |
人员眼睛的保护.雪地汽车使用者的眼睛保护设备 |
(Personal eye-protection - Eye protectors for snowmobile users.) |
| NF C46-966-01-1995 |
远程控制设备和系统.第6部分:与ISO标准和ITU推荐相兼容的传输协议.第601节:经过不变存取与包开关数据网络相 |
() |
| NF C97-307-1996 |
声音系统设备.第7部分:头带式受话器和耳机 |
(Sound system equipment. Part 7 : headphones and earphones.) |
| NF V03-083-2003 |
食品.痕量元素的测定.用干灰化后的原子吸收光谱法测定铅、镉、锌、铜、铁和铬 |
(Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after dry ashing.) |
| NF A06-903-2002 |
锡铸锭的分析方法.原子光谱法测定等级99.90%和99.85%锡中的纯元素含量 |
(Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry.) |
| NF C20-720-1987 |
基本环境试验程序.试验方法.试验T:锡焊 |
(Basic environmental testing procedures. Test methods. Test T : soldering.) |
| NF A02-130-1-2003 |
铝及铝合金.再熔主合金和铸件用合金铝锭的名称与符号.第1部分:数字命名系统 |
(Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1 : numerical designation system.) |
| NF Z83-507-1997 |
数字蜂窝式电信系统(2).服务可达性(GSM 02.11) |
(Digital cellular telecommunications system (Phase 2). Service accessibility (GSM 02.11).) |
| NF P18-938-2002 |
混凝土结构的防护和维修用产品和系统.试验方法.压缩弹性模量的测定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression.) |
| NF A89-052-2-2001 |
金属材料焊接程序的规范和合格评定.焊接程序规范.第2部分:气焊 |
(Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2 : gas welding.) |
| NF P99-100-2003 |
交通信号控制器.功能及操作的安全规范 |
(Traffic signal controllers - Functional and operational safety specifications.) |
| NF M07-001-1999 |
石油液体.人工取样 |
(Petroleum liquids. Manual sampling.) |
| NF A88-230/A1-2002 |
焊接及相关工艺的卫生和安全.弧焊用透明焊接防护罩、安全带和屏蔽物 |
(Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes.) |
| NF D38-005-1961 |
家政学.家用冰箱.容积的测定 |
(Domestic economy. Domestic refrigerators. Determination of volumes.) |
| NF C26-212-1989 |
测定暴露于电热金属线源时固体电绝缘材料可燃性的试验方法. |
(Methods of test for the determination of the ignitability of solid electrical insulating materials when exposed to electrically heated wire sources.) |
| NF E48-703-1993 |
液压传动.串联过滤器用过滤器元件.尺寸 |
(Hydraulic fluid power. Filtr elements for inline filters. Dimensions.) |
| NF C45-213-1998 |
继点器.第3部分:依赖时间或非依赖时间的单输入引擎质量测量继电器 |
(Electrical relays. Part 3 : single input energizing quantity measuring relays with dependent or independent time.) |
| NF P61-609-1997 |
瓷砖和板块用灰浆和胶粘剂.反应性树脂胶粘剂的抗剪强度的测定 |
(Adhesives for tiles. Determination of shear adhesion strength of reaction resin adhesives.) |
| NF S10-105-2002 |
光学和光学仪器.激光和激光相关设备.词汇和符号 |
(Optics and optical instruments - Lasers and laser-related equipment - Vocabulary and symbols.) |
| NF U66-064-1984 |
农业食品生产设备.固定式带锯.综合安全装置 |
(Agri-foodstuffs equipment. Fixed band saws. Integral safety devices.) |
| NF S84-060-1996 |
钟表业.表的中心轴.与小齿轮的连接尺寸 |
(Horology. Center staff for watches. Fitting dimensions with cannon pinion.) |
| NF X43-014-2003 |
空气质量.环境空气.空气沉淀物总量的测定.取样.分析前样品的制备 |
(Air quality - Ambient air - Determination of total atmospheric deposition - Sampling - Preparation of samples prior analysis.) |
| NF G08-001-1-1987 |
纺织.纤维和纱线.发货商品质量的测定.第1部分:质量的测定和计算 |
(Textiles. Fibres and yarns. Determination of commercial mass of consignments. Part 1 : mass determination and calculations.) |
| NF R41-102-2003 |
商用道路车辆.牵引车和拖车间的机械连接件.环形42 mm x 68 mm的拉杆眼 |
(Commercial road vehicles - Mechanical connections between towing vehicles and trailers - Toroidal drawbar eye of 42 mm x 68 mm.) |
| NF A91-455-1-2001 |
铝及铝合金.阳极氧化.第1部分:铝上装饰和保护用阳极氧化覆层的规定方法 |
(Aluminium and aluminium alloys - Anodizing - Part 1 : method for specifying decorative and protective anodic oxidation coatings on aluminiurm.) |
| NF H02-012-2001 |
包装.拉伸钢带规范 |
(Packaging - Specification for tensional steel strapping.) |
| NF G38-125-2000 |
土工织物及其相关产品.拉伸蠕变和蠕变破裂行为的测定 |
(Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour.) |
| NF P19-829-7-1998 |
预制混凝土产品.玻璃增强混凝土的试验方法.第7部分:随潮湿含量尺寸变化的极限测量 |
(Precast concrete products. Test method for glass-fibre reinforced cement. Part 7 : measurement of extremes of dimensional variations due to moisture content.) |
| NF C20-911-1-30-2003 |
着火危险试验.第1-30部分:电工产品着火危险评定指南.预选试验规程的使用 |
(Fire hazard testing - Part 1-30 : guidance for assessing the fire hazard of electrotechnical products - Use of preselection testing procedures.) |
| NF C93-368-2001 |
磁氧化物制成的低断面芯的尺寸 |
(Dimensions of low-profile cores made of magnetic oxides.) |
| NF E17-010-2-2000 |
计量方法.除水以外的液体测量用单位.第2部分:试验方法、条件和程序 |
(Metrological means - Units for measuring liquids other than water - Part 2 : test methods, conditions and procedures.) |
| NF T94-150-1998 |
人类用水的处理试剂.三氯化铁(欧洲标准EN 888) |
(Chemicals used for treatment of water intended for human consumption. Iron (III) chloride.) |
| NF C01-826-1987 |
电工技术词汇.第826章:建筑物的电力装置 |
(Electrotechnical vocabulary - Chapter 826 : electrical installations of buildings.) |
| NF C01-841-1988 |
电工技术词汇.841章:工业电热器 |
(Electrotechnical vocabulary. Chapter 841 : industrial electroheating.) |
| NF C46-506-1990 |
工业过程用调节阀.流量.流量的特性和校正的固有系数 |
(Industrial-process control valves. Flow capacity. Inherent flow characteristics and rangeability.) |
| NF M07-101-2000 |
柴油燃料乳剂中的水.通过离心试验测定稳定性 |
(Water in diesel fuel emulsions - Determination of stability by centrifugation.) |
| NF C27-131-1993 |
电气用硅液的规范 |
(Specifications for silicone liquids for electrical purposes.) |
| NF S95-184-2000 |
医用气体用高压柔性连接件. |
(High-pressure flexible connections for use with medical gases.) |
| NF C46-402-1993 |
工业过程控制系统中用模拟信号控制器.第2部分:检验和常规试验指南 |
(Controllers with analogue signals for use in industrial-process control systems. Part 2 : guidance for inspection and routine testing.) |
| NF V04-172-2-2003 |
奶和奶制品.测定硝酸盐和亚硝酸盐含量.第2部分:利用段流分析法(常规法) |
(Milk and milk products - Determination of nitrate and nitrite contents - Part 2 : method using segmented flow analysis (routine method).) |
| NF E04-707-1-1990 |
机械铅笔.第1部分:分类,尺寸,性能要求和试验 |
(Mechanical pencils. Part 1 : classification, dimensions, performance requirements and testing.) |
| NF P74-201-1/A1-2000 |
DTU 59.1.涂漆.建筑物涂漆工程.第1部分:技术规范手册 |
(DTU 59.1 - Painting - Building painting work - Part 1 : technical clauses book.) |
| NF Z15-004-1996 |
识别卡.录制方法:第3部分:识别卡-1上压纹字符的位置 |
(Identification cards. Recording technique. Part 3 : location of embossed characters on id-1 cards.) |
| NF T57-105-1998 |
纤维增强塑料复合材料.挠性性能的测定? |
(Fibre-reinforced plastic composites - Determination of flexural properties.) |
| NF T47-305-1-1996 |
弹性密封.排水设施用管接头密封用材料的要求.第1部分:硫化橡胶 |
(Elastomeric seals. Materials requirements for pipe joint seals used in water and drainage applications. Part 1 : vulcanized rubber.) |
| NF A81-303-2003 |
手工电弧焊用涂敷焊条.焊接金属沉积方法.硬度试验 |
(Covered electrodes for manual metal arc welding - Procedure for the deposition of weld metal - Hardness tests.) |
| NF L24-008-1996 |
航空航天系列.自锁锯齿柄螺母.安装方法 |
(Aerospace series. Shank nuts, self-locking, serrated. Installation procedure.) |
| NF E66-310/A1-2002 |
切削刀具用可转位刀片.命名.V型刀片的d和 m公差 |
(Indexable inserts for cutting tools - Designation - Tolerance of d and m of V-shape inserts.) |
| NF C20-736-1987 |
气侯的基本试验和机械坚固性的基本试验.试验方法.Fdb 试验.在宽带上的随机振动.中等重复性 |
(Basic environmental testing procedures. Test methods. Test Fdb : random vibration wide band. Reproducibility medium.) |
| NF S72-509-6/A1-2002 |
防护头盔.试验方法.第6部分:视野 |
(Protective helmets - Test methods - Part 6 : field of vision.) |
| NF M88-730/A1-2003 |
手控LPG气瓶阀规范和试验 |
(Specification and testing of LPG cylinder valves - Manually operated.) |
| NF G62-202-2000 |
鞋.鞋帮的试验方法.耐磨性 |
(Footwear - Test methods for insoles - Abrasion resistance.) |
| NF G62-104-2002 |
鞋类.鞋帮的试验方法.断裂强度和伸长率 |
(Footwear - Test methods for uppers - Tensile strength and elongation.) |
| NF G35-053-1998 |
编织地毯.用磨蚀机对羊毛纤维完整性的测定 |
(Textile floor coverings. Determination of wool fibre integrity using an abrasion machine.) |
| NF S97-102-1996 |
无侵入血压计.第2部分:机械血压计的补充要求 |
(Non-invasive sphygmonanometers - Part 2 : supplementary requirements for mechanical sphygmomanometers.) |
| NF S85-213-1996 |
钟表业.摆钻石 |
(Horology. Balances jewels.) |
| NF T90-017-1982 |
水的试验.铁含量的测定.1,10－菲缦琳分光光度法 |
(Testing water. Determination of iron. 1,10-phenanthroline spectrometric method.) |
| NF S11-480-2003 |
眼科光学.试戴镜规范 |
(Ophthalmic optics - Specifications for ready-to-wear spectacles.) |
| NF V32-177-1999 |
甘草精的提取物.甘草酸含量的测定.用高性能液相色谱分析法 |
(Liquorice extracts (Glycyrrhiza glabra L.) - Determination of glycyrrhizic acid content - Method using high-performance liquid chromatography.) |
| NF U02-015-1997 |
农林机械.带可动刀中耕机、电动锄及带驱动轮电动锄的可在侧面步行操纵的拖拉机.安全(欧洲标准EN 709) |
(Agricultural and forestry machinery. Pedestrian controlled tractors with mounted rotary cultivators, motors hoes, motor hoes with drive whel(s). Safety.) |
| NF Z15-201-1995 |
识别卡.光学存储卡.一般特性 |
(Identification cards. Optical memory cards. General characteristics.) |
| NF E90-322-3-1997 |
便携式手提电动工具.手柄振动的测量.第9部分:夯实机 |
(Hand-held portable power tools. Measurement of vibrations at the handle. Part 9 : rammers.) |
| NF C93-400-25-3-2002 |
电子设备用连接器.试验和测量.第25-3部分: 试验 25c:上升时间梯度 |
(Connectors for electronic equipment - Tests and measurement - Part 25-3 : test 25c - Rise time degradation.) |
| NF B10-613-1999 |
天然石材的试验方法.毛细管现象测定吸水系数 |
(Natural stone test methods. Determination of water absorption coefficient by capillarity.) |
| NF P85-518-1998 |
房屋建筑.密封剂.浸水后在保持的张力下粘接/附着特性的测定 |
(Building construction. Sealants. Determination of adhesion/cohesion properties after immersion in water.) |
| NF G35-043-1998 |
编织地毯.除针织起毛地毯外的针织地毯的分级 |
(Textile floor coverings. Classification of needled floor coverings except for needled pile floor coverings.) |
| NF B53-615-1998 |
木材和木基制品用符号 |
(Symbols for timber and wood-based products.) |
| NF C23-581-1-1/A1-2003 |
易燃粉尘区用电气设备.第1-1部分:用外壳保护的电气设备.结构和检验 |
(Electrical apparatus for use in the presence of combustible dust - Part 1-1: electrical apparatus protected by enclosures - Construction and testing.) |
| NF C93-400-4-3-2002 |
电子设备连接器.试验和测量.第4-3部分:电压应力试验.试验4c:预绝缘卷筒的电压检验 |
(Connectors for electronic equipment - Tests and measurements - Part 4-3 : voltage stress tests - Test 4c : voltage proof of pre-insulated crimp barrels.) |
| NF P20-516-1999 |
高或枢轴门.垂直负载抗性的测定(欧州标准EN 947) |
(Hinged or pivoted doors. Determination of the resistance to vertical load.) |
| NF C46-304-1991 |
用于工业过程管道的传感器.单个系列试验和检验指南 |
(Transmitters for use in industrail-process control systems. Guidance for inspection and routing testing.) |
| NF C18-450-1994 |
带电作业用带绝缘杆的天线设备 |
(Aerial devices with insulating boom used for live working exceeding 1 kv A.C.) |
| NF C93-400-4-2-2002 |
电子设备连接器.试验和测量.第4-2部分:电压应力试验.试验4b:部分放电 |
(Connectors for electronic equipment - Tests and measurements - Part 4-2 : voltage stress tests - Test 4b : partial discharge.) |
| NF C32-103-1980 |
设备用绝缘电缆和导线.一般电梯用橡胶绝缘电缆 |
(Insulated cables and flexible cords for installations. Rubber insulated lift cables for normal use.) |
| NF P98-897-6-2003 |
冷用密封胶.第6部分:浸入到化学液后粘着性/凝聚性测定的试验方法 |
(Cold applied joint sealants - Part 6 : test method for the determination of the adhesion/cohesion properties after immersion in chemical liquids.) |
| NF L52-250-301-2002 |
航空航天系列.飞行器用电缆.试验方法.第301部分:每单位长度的欧姆律电阻 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Part 301 : ohmic resistance per unit length.) |
| NF E60-172-5-1998 |
组合加工中心机床的试验条件.第5部分:工件夹紧盘定位的精度和可重复性 |
(Test conditions of machining centres. Part 5 : accuracy and repeatability of positioning of work-holding pallets.) |
| NF X03-002-1-2003 |
语种名称表示用代码.第1部分:α-2代码 |
(Codes for the representation of names of languages - Part 1 : Alpha-2 code.) |
| NF E26-020-1975 |
未校准未试验过的焊接圆钢环链 |
(Welded link chain round steel non calibrated non tested.) |
| NF E25-653-2001 |
半埋头(椭圆形)内六角攻丝螺钉 |
(Hexalobular socket raised countersunk (oval) head tapping screws.) |
| NF A02-005-2-1992 |
钢的命名体系.第2部分:编号体系 |
(Designation systems for steels. Part 2 : numerical system.) |
| NF C47-743-1998 |
家用和类似用途的电气自动控制器.第2部分:湿度感应控制器特别要求 |
(Automatic electrical controls for household and similar use. Part 2 : particular requirements for humidity sensing controls.) |
| NF C03-211-1997 |
图解用图形符号.第10部分:建筑结构和地形安装平面图和设计图 |
(Graphical symbols for diagrams. Part 10 : architectural and topographical installation plans and diagrams.) |
| NF Z15-151-1999 |
识别卡系统.人机接口.第1部分:用户界面的设计原理 |
(Identification card systems - Man-machine interface - Part 1 : Design principles for the user interface.) |
| NF C42-330-1995 |
工业铂电阻温度计感应器 |
(Industrial platinum resistance thermometer sensors.) |
| NF T31-245-2003 |
染料和填充剂的通用试验方法.第14部分:水萃取物电阻率的测定 |
(General methods of test for pigments and extenders - Part 14 : determination of resistivity of aqueous extract.) |
| NF T94-351-1997 |
生活用水处理用化学制品.正磷酸盐二氢化钠 |
(Chemicals used for treatment of water intended for human consumption. Sodium dihydrogen orthophosphate.) |
| NF C26-285-1996 |
浸渍剂对漆包线底衬的附着强度的测定试验方法 |
(Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate.) |
| NF A02-005-1-1992 |
钢的命名体系.第1部分:钢名.基本符号 |
(Designation systems for steel. Part 1 : steel names, principal symbols.) |
| NF A49-540-2-1997 |
非合金细晶粒结构钢的冷成形结构空心型材.第2部分:公差.尺寸和分段性能 |
(Cold form welded structural hollow sections of non-alloy and fine grain steels. Part 2 : tolerances, dimensions and sectional properties.) |
| NF S72-420-2002 |
军体运动用防护设备.第5部分:生殖器保护装置和腹部保护装置的附加要求和试验方法 |
(Protective equipment for martial arts - Part 5 : additional requirements and test methods for genital protectors and abdominal protectors.) |
| NF C20-343-1998 |
电子元部件.可靠性.换算用失效速度和应力模型的参考条件 |
(Electronic components. Reliability. Reference conditions for failure rates and stress models for conversion.) |
| NF C53-240-2-1999 |
可调速的电驱动系统.第2部分:一般要求.低电压可调频的交流电驱动系统的额定值规范 |
(Adjustable speed electrical power drive systems - Part 2 : general requirements - Rating specifications for low voltage adjustable frequency a.c. power drive systems.) |
| NF C01-461/A2-1999 |
电工词汇.第461章:电缆 |
(Electrotechnical Vocabulary - Chapter 461 : electric cables.) |
| NF S71-615-2-2002 |
浸渍服装.第2部分:废弃的服装,包括安全要求 |
(Immersion suits - Part 2 : abandonment suits, requirements including safety.) |
| NF T58-000-1987 |
塑料.(热固塑料和热塑)塑料模制件适用公差 |
(Plastics. Tolerances applicable to the plastics moulded parts (thermosetting and thermoplastic).) |
| NF P93-323-2-2002 |
壕沟内侧设施.第2部分:计算试验评估法 |
(Trench lining systems - Part 2 : assessment by calculation or test.) |
| NF C74-346-1988 |
植入人体的心脏起搏器的安全 |
(Safety of implantable cardiac pacemakers.) |
| NF P94-132-2000 |
土壤.调查与试验.LEFRANC试验 |
(Soil : investigation and testing - Lefranc test.) |
| NF E31-354-4-1999 |
采暖锅炉.第4部分:有强制通风式燃烧器的采暖锅炉.功率70kW以下、最大工作压力3巴的有强制通风式燃烧器的采 |
() |
| NF E66-508-1991 |
切割和研磨的基本量.第5部分:使用砂轮研磨加工用的基本术语 |
(Basic quantities in cutting and grinding. Part 5 : basic terminology for grinding processes using grinding wheels.) |
| NF C93-537-3-17-2002 |
通信电缆.试验方法规范.第3-17部分:机械试验方法.介质材料和护套电缆粘性 |
(Communication cables - Specifications for test methods - Part 3-17 : mechanical test methods - Adhesion of dielectric and sheath.) |
| NF C52-161-1993 |
变压器和电抗器声级的测定 |
(Determination of transformer and reactor sound levels.) |
| NF P16-326-1-1999 |
废水系统用带套管的纵向焊接不锈钢管的管和配件.第1部分:要求、试验和质量控制 |
(Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 1 : requirements, testing, quality control.) |
| NF P99-022-1-2003 |
道路交通管理.交通信号控制器.第1部分:控制器的试验方法 |
(Road traffic control - Traffic signal controllers - Part 1 : method of test of controllers.) |
| NF E71-002-2000 |
锤子.钢锤头技术规范.试验规程 |
(Hammers - Technical specifications concerning steel hammer heads - Test procedures.) |
| NF C20-703-1986 |
气侯的基本试验和机械坚固耐用的试验.试验方法.Ca试验.湿热的连续试验 |
(Basic environmental testing procedures. Test methods. Test Ca : damp heat, steady state.) |
| NF C31-520-1979 |
电路或仪表盘用铝和铝合金扁条线 |
(Flat aluminium and aluminium alloys bars for switchboards and electrical wirings (with rounded edges).) |
| NF B51-170-5-1999 |
胶合板.表面状况的分类.第5部分:测量方法、表示特征和缺陷 |
(Plywood. Classification by surface appearance. Part 5 : methods for measuring and expressing characteristics and defects.) |
| NF P18-437-1999 |
新鲜混凝土测试.第1部分:取样 |
(Testing fresh concrete - Part 1 : sampling.) |
| NF P18-160-1997 |
预应力钢筋混凝土构件用钢筋鞘管.术语、要求和质量控制(欧洲标准EN 523) |
(Steel strip sheaths for prestressing tendons. Terminology, requirements, quality control.) |
| NF P78-109-1-1998 |
建筑物玻璃.特殊基本产品.第1部分:硼硅酸盐玻璃 |
(Glass in building. Special basic products. Part 1 : borosilicate glasses.) |
| NF C01-471-1988 |
电工技术词汇.471章:绝缘体 |
(Electrotechnical vocabulary. Chapter 471 : insulators.) |
| NF B10-614-1999 |
天然石材的试验方法.抗压强度测定 |
(Natural stone test methods. Determination of compressive strength.) |
| NF C20-701-1993 |
环境试验.第2部分:试验.试验A:冷试验 |
(Environmental testing. Part 2 : tests. Tests A : cold.) |
| NF X50-071-1998 |
对开展产品认证团体的一般要求 |
(General requirements for bodies operating product certification systems.) |
| NF C74-212/A1-2001 |
放射治疗设备.配位、移动和定标 |
(Radiotherapy equipment - Coordinates, movements and scales.) |
| NF V04-415-2002 |
肉,肉制品和水产品.L羟基脯氨酸(胶原)含量的测定 |
(Meat, meat product and fishery products - Determination of L-hydroxyproline (collagen) content.) |
| NF V37-021-2002 |
烟草和烟草制品.卷烟和过滤咀的耐拉性.标准条件和测量 |
(Tobacco and tobacco products - Draw resistance of cigarettes and pressure trop of filter rods - Standard conditions and measurement.) |
| NF E62-203-1996 |
组合机床通用部件.滑动组件 |
(Modular units for machine tool construction. Slide units.) |
| NF P99-313-2003 |
道路信息和利用.道路动态信息设备.术语 |
(Road information and exploitation - Dynamic road equipment - Terminology.) |
| NF S62-222-1999 |
固定的消防系统.喷头和喷水系统用元部件.第2部分:报警湿阀组件 |
(Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2 : wet alarm valve assemblies.) |
| NF M07-043-1996 |
石油产品.汽油中铅含量的测定.一氯化碘法 |
(Petroleum products. Determination of lead content of gasoline. Lodine monochloride method.) |
| NF C53-221-2002 |
半导体变流器.第2部分:包括直流变流器的自换向半导体变流器 |
(Semiconductor converters - Part 2 : self-commutated semiconductor converters including direct d.c. converters.) |
| NF X06-041-6-1994 |
统计学应用.测量方法和测量结果的精确性.第6部分;准确值的实际应用 |
(Application of statistics - Accuracy (trueness and precision) of measurement methods and results - Part 6 : use in practice of accuracy values.) |
| NF Z81-648-1997 |
公共交换电话网络(PSTN).呼叫线路识别展示(CLIP)辅助服务.服务描述 |
(Public Switched Telephone Network (PSTN). Calling Line Identification Presentation (CLIP) supplementary service. Service description.) |
| NF C46-063-2002 |
电气/电子/可编程序的电子安全相关系统的功能安全.第3部分:软件要求 |
(Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3 : software requirements.) |
| NF T75-336-1986 |
香精油.机械法提取的墨西哥酸柠檬香精油 |
(Essential oils. Oil of lime, mexico (citrus aurantiifolia (christmann) swingle) obtained by mechanical means.) |
| NF C51-155-1969 |
全封闭式线绕转子四极三相.感应电动机.E类 |
(Totally-enclosed wound-rotor four-pole three-phase. Induction motors. Class E.) |
| NF C96-260-1-2002 |
集成电路.150kHz-1GHz电磁辐射的测量.第1部分:一般条件和定义 |
(Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 1 : general conditions and definitions.) |
| NF D36-103-2001 |
家政学.使用管道气体燃料的家用器具外部连接用(增强)橡胶软管 |
(Household economy - (Reinforced) flexible rubber tubing for the external connection of domestic appliances using gaseous fuels by networks.) |
| NF E90-322-1-1995 |
便携式手提动力工具.手柄振动的测量.第2部分:凿锤和铆钉锤 |
(Hand-held portable power tools. Measurement of vibrations at the handle. Part 2 : chipping hammers and riveting hammers.) |
| NF C26-156-1997 |
玻璃和玻璃聚酯纤维机织带的规范.第2部分:试验方法 |
(Specification for glass and glass polyester fibre woven tapes. Part 2 : methods of test.) |
| NF P26-322-2002 |
建筑五金.单轴链接件的要求和试验方法. |
(Building hardware - Single-axis hinges - Requirements and tests methods.) |
| NF C01-121-1999 |
电工技术词汇.第121章:电磁学 |
(Electrotechnical Vocabulary. Chapter 121 : electromagnetism.) |
| NF P20-514-2000 |
门.在两种不同气候间的门扇的性能.试验方法 |
(Doors - Behaviour between two different climates - Test method.) |
| NF C10-102-1997 |
绝缘配合.第2部分:使用导则 |
(Insulation co-ordination. Part 2 : application guide.) |
| NF C54-117-1997 |
大于和等于1000V电压的交流系统用非自愈并联电力电容器.第3部分:内部熔断器 |
(Shunt power capacitors of the non-self healing type for A.C. systems having a rated voltage up to and including 1 kV.) |
| NF C46-803-1994 |
船速和船距测量仪表.操作与技术规定.试验方法和要求的结果 |
(Marine speed and distance measuring equipment (sdme). Operational and performance requirements. Methods of testing and required test results.) |
| NF E31-404-1/A1-2002 |
非家用多燃烧器燃气式架空辐射管加热器系统.第1部分:D系统安全 |
(Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1 : system D, safety.) |
| NF S97-045-2002 |
临床试验用橡胶阴茎套.物理性能的测量 |
(Rubber condoms for clinical trials - Measurement of physical properties.) |
| NF G54-104-2002 |
制革厂机械.辊子涂覆机的安全要求 |
(Tannery machines - Roller coating machine - Safety requirements.) |
| NF C42-722-1996 |
测量、控制和试验室用电气设备的安全要求.第2-051部分:机械混合和搅拌用实验室设备的特殊要求 |
(Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-051 : particular requirements for laboratory equipment for mechanical mixing and stirring.) |
| NF P33-301-1994 |
屋顶用纤维水泥成型板材和配件.产品规范和试验方法 |
(Fibre-cement profiled sheets and fittings for roofing. Product specification and test methods.) |
| NF A36-703-2002 |
包装用钢.用于接触人和动物消费的食品、产品和饮料的扁钢制品.镀铬非合金钢 |
(Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non alloy steel chromium coated.) |
| NF C28-918/A1-2002 |
磁性材料.第4部分:软磁材料的直流磁特性测量方法 |
(Magnetic materials - Part 4 : methods of measurement of d.c. magnetic properties of magnetically soft materials.) |
| NF P21-385-1999 |
木紧固件.木连接件规范 |
(Timber fasteners - Specifications for connectors for timber.) |
| NF C53-226-1985 |
高压直流电传输的术语 |
(Terminology for high-voltage direct current transmission.) |
| NF T56-101/A1-1997 |
NF T56-101-1976的补充件 A1 |
() |
| NF C46-064-2002 |
电气/电子/可编程序的电子安全相关系统的功能安全.第4部分:定义和缩写 |
(Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4 : definitions and abbreviations.) |
| NF E48-030-2001 |
液动系统和元件.液压缸.装配尺寸和装配类型的识别标志 |
(Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types.) |
| NF B10-615-1999 |
天然石材的试验方法.实密度、表观密度、总孔隙度和开口孔隙率的测定 |
(Natural stone test methods. Determination of real density and apparent density, and of total and open porosity.) |
| NF P26-433-1998 |
建筑五金.防腐蚀.要求和试验方法 |
(Building hardware. Corrosion resistance. Requirements and test methods.) |
| NF P82-310-1998 |
电梯制造和安装的安全规则.第2部分:液压式电梯 |
(Safety rules for the construction and installation of lifts. Part 2 : hydraulic lifts.) |
| NF A03-750-2000 |
金属材料.张力的单轴蠕变试验.试验方法 |
(Metallic materials - Uniaxial creep testing in tension - Method of test.) |
| NF C60-432-1991 |
小型熔断器.第3部分:超小型熔断体 |
(Miniature fuses. Part 3 : sub-miniature fuse-links.) |
| NF U65-059-2000 |
食品加工机.中间校准仪.安全和卫生要求 |
(Food processing machinery - Intermediate provers - Safety and hygiene requirements.) |
| NF C42-107-1990 |
直接指示电测仪表及其附件.附件用的特殊规定 |
(Direct acting indicating analogue electrical measuring instruments and their accessories. Part 8 : special requirements for accessories.) |
| NF C93-840-1-22-2002 |
光学纤维.第1-22部分:测量方法和试验程序.长度测量 |
(Optical fibres - Part 1-22 : measurements methods and test procedures - Length measurement.) |
| NF C26-148-12-1998 |
电工用压敏胶粘带.第3部分:单项材料规范.第12活页:带有压敏胶粘剂的聚乙烯薄膜胶粘带 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 12 : polyethylene film tapes with pressure-sensitive adhesive.) |
| NF P20-514-2000 |
门.在两种不同气候间的门扇的性能.试验方法 |
(Doors - Behaviour between two different climates - Test method.) |
| NF C10-102-1997 |
绝缘配合.第2部分:使用导则 |
(Insulation co-ordination. Part 2 : application guide.) |
| NF C54-117-1997 |
大于和等于1000V电压的交流系统用非自愈并联电力电容器.第3部分:内部熔断器 |
(Shunt power capacitors of the non-self healing type for A.C. systems having a rated voltage up to and including 1 kV.) |
| NF C46-803-1994 |
船速和船距测量仪表.操作与技术规定.试验方法和要求的结果 |
(Marine speed and distance measuring equipment (sdme). Operational and performance requirements. Methods of testing and required test results.) |
| NF E31-404-1/A1-2002 |
非家用多燃烧器燃气式架空辐射管加热器系统.第1部分:D系统安全 |
(Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1 : system D, safety.) |
| NF S97-045-2002 |
临床试验用橡胶阴茎套.物理性能的测量 |
(Rubber condoms for clinical trials - Measurement of physical properties.) |
| NF G54-104-2002 |
制革厂机械.辊子涂覆机的安全要求 |
(Tannery machines - Roller coating machine - Safety requirements.) |
| NF C42-722-1996 |
测量、控制和试验室用电气设备的安全要求.第2-051部分:机械混合和搅拌用实验室设备的特殊要求 |
(Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-051 : particular requirements for laboratory equipment for mechanical mixing and stirring.) |
| NF P33-301-1994 |
屋顶用纤维水泥成型板材和配件.产品规范和试验方法 |
(Fibre-cement profiled sheets and fittings for roofing. Product specification and test methods.) |
| NF A36-703-2002 |
包装用钢.用于接触人和动物消费的食品、产品和饮料的扁钢制品.镀铬非合金钢 |
(Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non alloy steel chromium coated.) |
| NF C28-918/A1-2002 |
磁性材料.第4部分:软磁材料的直流磁特性测量方法 |
(Magnetic materials - Part 4 : methods of measurement of d.c. magnetic properties of magnetically soft materials.) |
| NF P21-385-1999 |
木紧固件.木连接件规范 |
(Timber fasteners - Specifications for connectors for timber.) |
| NF C53-226-1985 |
高压直流电传输的术语 |
(Terminology for high-voltage direct current transmission.) |
| NF T56-101/A1-1997 |
NF T56-101-1976的补充件 A1 |
() |
| NF C46-064-2002 |
电气/电子/可编程序的电子安全相关系统的功能安全.第4部分:定义和缩写 |
(Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4 : definitions and abbreviations.) |
| NF E48-030-2001 |
液动系统和元件.液压缸.装配尺寸和装配类型的识别标志 |
(Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types.) |
| NF B10-615-1999 |
天然石材的试验方法.实密度、表观密度、总孔隙度和开口孔隙率的测定 |
(Natural stone test methods. Determination of real density and apparent density, and of total and open porosity.) |
| NF P26-433-1998 |
建筑五金.防腐蚀.要求和试验方法 |
(Building hardware. Corrosion resistance. Requirements and test methods.) |
| NF P82-310-1998 |
电梯制造和安装的安全规则.第2部分:液压式电梯 |
(Safety rules for the construction and installation of lifts. Part 2 : hydraulic lifts.) |
| NF A03-750-2000 |
金属材料.张力的单轴蠕变试验.试验方法 |
(Metallic materials - Uniaxial creep testing in tension - Method of test.) |
| NF C60-432-1991 |
小型熔断器.第3部分:超小型熔断体 |
(Miniature fuses. Part 3 : sub-miniature fuse-links.) |
| NF U65-059-2000 |
食品加工机.中间校准仪.安全和卫生要求 |
(Food processing machinery - Intermediate provers - Safety and hygiene requirements.) |
| NF C42-107-1990 |
直接指示电测仪表及其附件.附件用的特殊规定 |
(Direct acting indicating analogue electrical measuring instruments and their accessories. Part 8 : special requirements for accessories.) |
| NF C93-840-1-22-2002 |
光学纤维.第1-22部分:测量方法和试验程序.长度测量 |
(Optical fibres - Part 1-22 : measurements methods and test procedures - Length measurement.) |
| NF C26-148-12-1998 |
电工用压敏胶粘带.第3部分:单项材料规范.第12活页:带有压敏胶粘剂的聚乙烯薄膜胶粘带 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 12 : polyethylene film tapes with pressure-sensitive adhesive.) |
| NF C31-676-1998 |
特种绕组线规范.第26部分:聚酰胺-酰亚胺涂覆圆铜绕组线.200级 |
(Specifications for particular types of winding wires. Part 26 : polyamide-imide enamelled round copper wire, class 200.) |
| NF C46-904-4-2-1997 |
使用配电线路载波系统的自动分配装置.第4部分:数据通讯协议.第42节:应用协议.应用层 |
(Distribution automation using distribution line carrier systems. Part 4 : data communication protocols. Section 42 : application protocols. Application layer.) |
| NF C52-558-2-17-2001 |
电力变压器、供电设备及类似设备的安全.第2-17部分:开关式供电用变压器的特殊要求 |
(Safety of power transformers, power supply units and similar - Part 2-17 : particular requirements for transformers for switch mode power supplies.) |
| NF A82-112-2-2002 |
电阻焊接水冷次级线圈连接电缆.第2部分:单根导线连接电缆的尺寸及要求 |
(Water-cooled secondary connection cables for resistance welding - Part 2 : dimensions and requirements for single-conductor connection cables.) |
| NF C32-102-4-1999 |
额定电压450/750V(包括450/750V)以下的橡胶绝缘电缆.第4部分:电缆束和软电缆 |
(Rubber insulated cables of rated voltages up to and including 450/750 V - Part 4 : cords and flexible cables.) |
| NF S31-089-2000 |
声学.自由声波场安装的隔音设备的声学特的测定的试验规则 |
(Acoustics - Test code for the determination of acoustical characteristics of sound barriers installed in a free field.) |
| NF J37-501-2002 |
船舶和造船技术.挖泥船.分类 |
(Ships and marine technology - Dredgers - Classification.) |
| NF C93-400-2-3-2002 |
电子设备连接器.试验和测量.第2-3部分:带电连续性和接触电阻试验.试验2c:接触电阻变化 |
(Connectors for electronic equipment - Tests and measurements - Part 2-3 : electrical continuity and contact resistance tests - Test 2c : contact resistance variation.) |
| NF S97-121-2-2000 |
医用非织造敷布的试验方法.第2部分:成品敷布 |
(Test methods for nonwoven compresses for medical use - Part 2 : finished compresses.) |
| NF C03-251-1993 |
电工技术用文件的编制.第1部分:一般要求 |
(Preparation of documents used in electrotechnology. Part 1 : general requirements.) |
| NF C26-183-2-1995 |
电工用热固性树脂基工业刚性层压板规范.第3部分:单项材料规范.第2篇:环氧树脂基刚性层压板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3 : specifications for individual materials - Sheet 2 : requirements for rigid laminated sheets based on epoxyde resins.) |
| NF C27-232-1990 |
在液体绝缘中微粒形态和数目确定的方法 |
(Methods for counting and sizing particles in insulating liquids.) |
| NF C26-203-1985 |
试验方法.用绕管法评价软片型绝缘材料耐热性的试验方法 |
(Test method for evaluating thermal endurance of flexible sheet materials using the wrappel tube method.) |
| NF C20-300-1-1994 |
可靠性管理.第1部分:可靠性程序管理 |
(Dependability management. Part 1 : dependability programme management.) |
| NF C20-420-1994 |
环境试验.第3部分:导则;设备的地震试验方法 |
(Environmental testing. Part 3 : guidance seismic test methods for equipments.) |
| NF C93-406-2-001-2002 |
电气设备连接器.第2-001部分:圆形连接器.空白详细规范 |
(Connectors for electronic equipment - Part 2-001 : circular connectors - Blank detail specification.) |
| NF C51-318-21-1995 |
旋转电机.第18部分:绝缘体系的功能评定.第21节:绕组线的试验程序.热测定和分类 |
(Rotating electrical machines. Part 18 : functional evaluation of insulation systems. Section 21 : test procedures for wire-wound windings. Thermal evaluation and classification.) |
| NF C23-521-2000 |
潜在爆炸性气体环境用电器.“n“型防护装置 |
(Electrical apparatus for potentially explosive atmospheres - Type of protection “n“.) |
| NF C26-235-1-1994 |
电绝缘材料的液压稳定性的试验方法.第1部分:塑料薄膜 |
(Method of test for the hydrolic stability of electrical insulating materials. Part 1 : plastic films.) |
| NF E09-091-2002 |
机械安全.防火及保护 |
(Safety of machinery - Fire prevention and protection.) |
| NF C20-341-1994 |
可靠性分析技术.可靠性方块图法 |
(Analysis techniques for dependability. Reliability block diagram method.) |
| NF C46-951-02-1996 |
远程控制设备和系统.第5部分:传输协议.第102节:总电源系统传输的标准手册 |
(Telecontrol equipment and systems. Part 5 : transmission protocols. Section 102 : companion standard for the transmission of integrated totals in electric power systems.) |
| NF T76-314-2002 |
纸和纸板、包装和一次性卫生用品用胶粘剂. 柔性对柔性组合的180 o-“T“ 剥离试验 |
(Adhesives for paper and board, packaging and disposable sanitary products - 180 o-“T“ peel test for a flexible-to-flexible assembly.) |
| NF C10-100-1995 |
绝缘配合.第1部分:定义、原则和规则 |
(Insulation co-ordination. Part 1 : definitions, priciples and rules.) |
| NF C10-105-1997 |
发电厂和变电所的直流辅助设备内短路电流.第2部分:影响的计算 |
(Short-circuit currents in d.c. auxiliary installations in power plants and substations. Part 2 : calculation of effects.) |
| NF J95-046-2-2002 |
小型船舶.船体结构和船材尺寸.第2部分:材料:夹层结构用心材料,嵌入材料 |
(Small craft - Hull construction and scantlings - Part 2 : materials : core materials for sandwich construction, embedded materials.) |
| NF C42-198-4-1997 |
1KV交流电和1.5KV直流电以下的低压配电系统中的电器安全性.试验,测量或保护监测测量用设备.第4部分:接地和 |
(Electrical safety in low voltage distribution systems up to 1 kV A.C. and 1,5 kV d.c. Equipment for testing, measuring or monitoring of protective measures. Part 4 : resistance of earth connection and equipotential bonding.) |
| NF S31-001-1-2002 |
电声学.测听设备.第1部分:纯音测听计 |
(Electroacoustics - Audiological equipment - Part 1 : pure-tone audiometers.) |
| NF C55-564-1993 |
汽轮机速度控制系统验收试验 |
(Acceptance tests for steam turbine speed control systems.) |
| NF B51-190-2-2000 |
木质板.取样、切割和检验.第2部分:工厂中的质量控制 |
(Wood-based panels - Sampling, cutting and inspection - Part 2 : quality control in the factory.) |
| NF G35-028-1997 |
编织地毯.背面加衬厚度的表观效果测定? |
(Textile floor coverings. Determination of the apparent effective thickness of the backing.) |
| NF B51-301-1996 |
混凝土连接碎料板.耐霜冻性的测定 |
(Cement bonded particleboards. Determination of frost resistance.) |
| NF C23-520-1995 |
防爆电气设备.内在安全“I“ |
(Electrical apparatus for potentially explosive atmospheres. Intrinsic safety “i“.) |
| NF P15-478-1990 |
水泥试验方法.水泥中氯化物.二氧化碳和碱含量的测定 |
(Methods of testing cement. Determination of the chloride, carbon dioxide and alkali content of cement.) |
| NF P85-517-1998 |
房屋建筑.密封剂.浸水后在保持的张力下粘接/附着特性的测定 |
(Building construction. Sealants. Determination of adhesion/cohesion properties at maintained extension after immersion in water.) |
| NF R41-173-2002 |
道路车辆.第五轮中枢销.强度试验 |
(Road vehicles - Fifth wheel kingpins - Strength test.) |
| NF C26-167-1996 |
电气用基于热固性树脂的工业硬质圆形层压管和棒材.第2部分:试验方法 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 2 : methods of test.) |
| NF C32-213-1998 |
便携式接地和短路设备用电缆 |
(Cables for portable earthing and short-circuiting equipment.) |
| NF C47-744-1998 |
家用和类似用途的自动电控制设备.第2部分:电调节器的特殊要求 |
(Automatic electrical controls for household and similar use. Part 2 : particular requirements for electric actuators.) |
| NF C52-558-2-7-1999 |
电力变压器、供电设备及类似设备的安全.第2-7部分:玩具用变压器的特殊要求 |
(Safety of power transformers, power supply units and similar - Part 2-7 : particular requirements for transformers for toys.) |
| NF C26-290-2-1993 |
测定绝缘材料电离辐射效应的指南.第2部分:辐射和试验方法 |
(Guide for determining the effects of ionizing radiation on insulating materials. Part 2 : procedures for irradiation and test.) |
| NF C26-291-1994 |
带电表面放电评定指南 |
(Guide for evaluating the discharges from a charged surface.) |
| NF G62-306-2000 |
鞋.外鞋帮的试验方法.尺寸稳定性 |
(Footwear - Test methods for outsoles - Dimensional stability.) |
| NF C20-710-1989 |
环境试验.试验方法.J试验和导则:霉菌生长 |
(Environmental testing. Test methods. Test J and guidance : mould growth.) |
| NF C26-205-1993 |
测定电绝缘液体玻璃化转变温度的试验方法 |
(Methods of test for the determination of the galss transition temperature of electrical insulationg liquids.) |
| NF U42-601-2000 |
肥料.流率的测定 |
(Fertilizers - Determination of flow rate.) |
| NF P16-250-3-2000 |
建筑物内的重力排水系统.第3部分:屋顶管道,布局和计算 |
(Gravity drainage systems inside buildings - Part 3 : roof drainage, layout and calculation.) |
| NF M06-005-2000 |
石油工业.术语.第4部分:精炼 |
(Petroleum industry - Terminology - Part 4 : refining.) |
| NF T94-422-2000 |
人类用水的处理试剂.紧急情况使用的化学试剂.sodium dichloroisocyanurate,dihydrate |
(Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, dihydrate.) |
| NF C20-717-1995 |
环境试验.第2部分:试验.试验Q:密封 |
(Environmental testing. Part 2 : tests. Test Q : sealing.) |
| NF C46-522-1994 |
工业处理控制阀.第8部分:噪声条款.第4节:液压流动产生的噪声预定(EN 534-8-4) |
(Industrial-process control valves. Part 8 : noise considerations. Section 4 : prediction of noise generated by hydrodynamic flow.) |
| NF C34-114-1996 |
电气设备用铝包钢丝 |
(Aluminium-clad steel wires for electrical purposes.) |
| NF C46-604-1994 |
工业控制系统用范围总线标准.弟2部分:物理层分类和操作 |
(Fieldbus standard for use in industrial control systems. Part 2 : physical layer specification and service definition.) |
| NF E63-607-3-2001 |
橡胶和塑料机.挤压机和挤压线.第3部分:撤下来的安全要求 |
(Rubber and plastics machines - Extruders and extrusion lines - Part 3 : safety requirements for haul-offs.) |
| NF C26-113-5-1995 |
云母基绝缘材料规范.第3部分:单项材料规范.第5活页:用环氧树脂粘合剂粘结的待浸渍处理的玻璃纤维织物衬底云 |
(Specification for insulating materials based on mica. Part 3 : specificatins for individual materials. Sheet 5 : glass-backed mica paper with an epoxy resin binder for post-impregnation (vpi).) |
| NF C61-443-1996 |
家用和类似用剩余电流控制装置.电磁兼容性 |
(Residual current-operated protective devices (rcds) for household and similar use. Electromagnetic compatibility.) |
| NF G35-045-2002 |
铺地织物.铺地针织物单位面积质量的测定 |
(Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings.) |
| NF M88-735-2002 |
汽车用液化石油气系统用户使用说明书内容的最低要求 |
(Minimum requirements for the content of the user manual for automotive LPG systems.) |
| NF S11-811-2000 |
眼科光学.接触透镜护理用品.抗微生物保存效果测试和废弃日期测定指南 |
(Ophthalmic optics - Contact lens care products - Antimicrobial preservative efficacy testing and guidance on determining discard date.) |
| NF P18-321-1998 |
混凝土添加剂.砖石和灰浆.试验方法.第12部分:添加剂碱性含量的测定 |
(Admixtures for concrete, mortar and grout. Test methods. Part 12 : determination of the alkali content of admixtures.) |
| NF P62-000-1998 |
有弹性的地板覆盖物.词汇 |
(Resilient floor coverings. Vocabulary.) |
| NF P28-101-2002 |
幕墙.透气率.性能要求和分类 |
(Curtain walling - Air permeability - Performance requirements and classification.) |
| NF P18-924-1998 |
混凝土结构的修复和保护用产品和系统.试验方法.聚合物拉伸强度的测定 |
(Products and systems for the protection and repair of concrete structures. Test methods. Determination of tensile strength development for polymers.) |
| NF L13-141-2001 |
航空航天系列.银基合金AG-B14001(AgCu42Ni2).钎焊用填充金属.卷状箔 |
(Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Rolled foil.) |
| NF C73-161/A1-2002 |
家用真空吸尘器性能的测量方法 |
(Vaccum cleaners for household use - Methods of measuring the performance.) |
| NF C46-101-1984 |
工业过程中的测量与控制.直流电模拟信号 |
(Industrial-process measurement and control. Analogue D.C. current signals.) |
| NF C26-206-1985 |
电气隔热的评价和分类 |
(Thermal evaluation and classification of electrical insulation.) |
| NF P19-829-1-1998 |
预制混凝土产品.玻璃增强混凝土的试验方法.第1部分:基质坚硬度的测量.滑落试验方法 |
(Precast concrete products. Test method for glass-fibre reinforced cement. Part 1 : measuring the consistency of the matrix, “Slump test“ method.) |
| NF T94-156-1998 |
人类用水的处理试剂.碳酸氢钠(欧洲标准EN 898) |
(Chemicals used for treatment of water intended for human consumption. Sodium hydrogen carbonate.) |
| NF P85-521-1998 |
房屋建筑.密封剂.抗压缩测定 |
(Building construction. Sealants. Determination of resistance to compression.) |
| NF C01-461-1985 |
电工技术词汇.第461章.电缆 |
(Electrotechnical vocabulary. Chapter 461 : electric cables.) |
| NF C52-115-1/A1-1996 |
NF C 52-115-1-1994的补充件 A1 |
() |
| NF P16-325-1-1999 |
废水系统有插端和管座的径向焊接热浸电镀钢管管道和配件.第1部分:要求,试验和质量控制(EN1123-1) |
(Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems. Part 1 : requirements, testing, quality control.) |
| NF P84-128-1-1999 |
防水用柔性薄板.厚度和每单位面积质量的测定.第1部分:屋顶防水用沥青片 |
(Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1 : bitumen sheets for roof waterproofing.) |
| NF C11-203-1997 |
架空线.结构基础试验 |
(Overhead lines. Testing of foundations for structures.) |
| NF C46-025-4-1996 |
过程测量和控制装置.性能评定方法和步骤.第4部分:评估报告内容 |
(Process measurement and control devices. General methods and procedures for evaluating performance. Part 4 : evaluation report content.) |
| NF C54-105-1997 |
电力电子电容器.第1部分:总则 |
(Power electronic capacitors. Part 1 : general.) |
| NF C57-110-1998 |
光电模型(PV)的紫外线试验(欧洲标准61354) |
(UV test for photovoltaic (PV) modules.) |
| NF C26-148-5-1998 |
电气用压力敏感粘接带.第3部分:个体材料规范.第5节:带橡胶热塑粘接的,非皱折的,纤维素纸 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 5 : cellulosic paper, non creped, with rubber thermosetting adhesive.) |
| NF U34-151-2000 |
林业设备.手提式链锯.发动机性能和油耗 |
(Forestry machinery - Portable chain-saws - Engine performance and fuel consumption.) |
| NF C52-300-1996 |
反应器 |
(Reactors.) |
| NF E86-502-3-2002 |
冷冻车辆.大型可运输真空绝缘车辆.第3部分:运行要求 |
(Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3 : operational requirements.) |
| NF C93-400-11-10-2002 |
电子设备连接器.试验和测量.第11-10部分:气候试验.试验11j:寒冷 |
(Connectors for electronic equipment - Tests and measurements - Part 11-10 : climatic tests - Test 11j : cold.) |
| NF C26-131-2-1996 |
电工用压纸板和厚纸板规范.第2部分:试验方法 |
(Specification for pressboard and presspaper for electrical purposes. Part 2 : methods of test.) |
| NF C26-290-1-1995 |
电器绝缘材料.确定电离辐射的影响.第1部分:辐射感应和剂量测定 |
(Electrical insulating materials. Determination of the effects of ionizing radiation. Part 1 : radiation interaction and dosimetry.) |
| NF C27-301-1992 |
按燃点和净热值的绝缘油的分类 |
(Classification of insulating liquids according to fire point and net calorific value.) |
| NF C26-183-7-1995 |
电工用热固性树脂基工业刚性层压板规范.第3部分:专用材料规范规范.第7活页:聚酰亚胺树脂基刚性层压板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 7 : requirements for rigid laminated sheets based on polyimide resins.) |
| NF E86-700-2-2002 |
金属工业管道.第2部分:材料 |
(Metallic industrial piping - Part 2 : materials.) |
| NF U47-017-2002 |
动物健康分析方法.测定感染牛肺疫病抗体的补偿固定试验方法 |
(Animal health analysis methods - Detection of antibodies against equine Rhinopneumonia by the Complement Fixation Test.) |
| NF C01-426-1990 |
电工技术词汇.426章:防爆电器 |
(Electrotechnical vocabulary. Chapter 426 : electrical apparatus for explosive atmospheres.) |
| NF C20-003-4-1995 |
环境条件分类.第3部分:环境参数组分类及其严酷程度分级.第4节:在无天气防护固定位置使用的产品 |
(Classification of environmental conditions. Part 3 : classification of groups of environmental parameters and their severities. Section 4 : stationary use at non-weatherprotected locations.) |
| NF E25-528-2000 |
平垫圈.标准系列.产品等级C |
(Plain washers - Normal series - Product grade C.) |
| NF C30-205-1994 |
额定电压450/750V(含)以下的圆铜导体电缆平均外径尺寸上限和下限的计算 |
(Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V.) |
| NF C96-013-6-1-2002 |
半导体器件的机械标准化.第6-1部分:平面式安装半导体器件外壳外形图绘制的一般规则.海鸥翼式铅终端的设计指 |
(Mechanical standardization of semiconductor devices - Part 6-1 : general rules for the preparation of outline drawings of surface mounted semiconductor device parkages - Design guide for gull-wing lea) |
| NF C26-961-1994 |
加感印制电路板用敷层(保形敷层)规范.第1部分:定义、分类及一般要求 |
(Specification for coatings for loaded printed wire boards (conformal coatings). Part 1 : definitions, classification and general requirements.) |
| NF V04-396-2003 |
牛奶和奶制品.测定氮含量.根据 Dumas原理使用常规燃烧法 |
(Milk and milk products - Determination of nitrogen content - Routine method using combustion according to the Dumas principle.) |
| NF C26-222-1995 |
电气绝缘材料.抗电弧和侵蚀性的评定方法.常规轮浸蚀试验 |
(Electrical insulating materials. Method to evaluate the resistance to tracking and erosion. Rotating wheel dip test.) |
| NF E17-304-2002 |
燃气表.气体容量电子转换装置 |
(Gas meters - Gas-volume electronic conversion devices.) |
| NF C26-183-6-1995 |
电工用热固性树脂基工业刚性层压板规范.第3部分:各种材料规范.第6活页:硅氧烷树脂基刚性层压板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 6 : requirements for rigid laminated sheets based on silicone resins.) |
| NF C20-001/A2-1995 |
NF EN 60721-1-1995的修改件 A2 |
() |
| NF P18-966-1999 |
混凝土结构的修复和保护产品和系统.试验方法.混凝土表面设施用结构粘结剂适用性的测量方法 |
(Products and systems for the protection and repair of concrete structures. Test methods. Tests to measure the suitability of structural bonding agents for application to concrete surface.) |
| NF X31-255-2-2001 |
土壤质量.污染物对幼年陆生螺类的影响(庭园大蜗牛).第2部分:通过土壤污染物测定其对生长的影响 |
(Soil quality - Effects of contaminants on juvenile land snails (Helix aspersa) - Part 2 : determination of the effects on growth by soil contamination.) |
| NF A91-200-1994 |
热喷涂.术语、分类 |
(Thermal spraying. Terminology, classification.) |
| NF E64-607-7-2002 |
木工机械的安全.圆盘锯床.第7部分:带集成送料工作台和手工装料和/或卸料的带耳圆盘锯床 |
(Safety of woodworking machines - Circular sawing machines - Part 7 : circular log sawing machine with integrated feeding table and manual loading and/or unloading.) |
| NF X31-427-2002 |
土质.用缓冲DTPA溶液提取痕量元素 |
(Soil quality - Extraction of trace elements by buffered DTPA solution.) |
| NF P16-325-2-1999 |
废水系统有插端和管座的径向焊接热浸电镀钢管管道和配件.第2部分:尺寸(EN1123-2) |
(Pipes and fittings of longitudinally welded, hot-dip galvanized steel pipes with spigot and socket for waste water systems. Part 2 : dimensions.) |
| NF T94-364-1997 |
生活用水处理用化学制品.三磷酸钾 |
(Chemicals used for treatment of water intended for human consumption. Potassium tripolyphosphate.) |
| NF P20-527-1999 |
窗户和窗帘墙壁,门,百叶窗和活动遮板.柔软和重的物体撞击门的抗性测定 |
(Windows and curtain walling, doors, blinds and shutters. Determination of the resistance to soft and heavy body impact for doors.) |
| NF T94-151-1998 |
人类用水的处理试剂.硫化铁(欧洲标准EN 889) |
(Chemicals used for treatment of water intended for human consumption. Iron (II) sulfate.) |
| NF X31-008-3-2002 |
土质.取样.第3部分:安全指南 |
(Soil quality - Sampling - Part 3 : guidance on safety.) |
| NF C18-404-1993 |
带电作业用的绝缘材料袖套 |
(Sleeves of insulating material for live working.) |
| NF P84-125-1-1999 |
防水柔性板.第1部分:屋顶防水用沥青板.接缝处抗剥离的测定 |
(Flexible sheets for waterproofing. Part 1 : bitumen sheets for roof waterproofing - Determination of peel resistance of joints.) |
| NF C47-742-1993 |
家用和类似用途的自动电控制设备.第2部分:电动门锁的特殊要求 |
(Automatic electrical controls for household and similar use. Part 2 : particular requirements for electrically operated door loks.) |
| NF C01-701-1990 |
电工技术词汇.701章:电信.线路和网络 |
(Electrotechnical vocabulary. Chapter 701 : telecommunications, channels and networks.) |
| NF C44-102-1993 |
交流电表的符号 |
(Symbols for alternating-current electricity meters.) |
| NF C60-430-1991 |
微型熔断器.第1部分:微型熔断器的定义和微型熔断体的一般要求 |
(Miniature fuses - Part 1 : definitions for miniature fuses and general requirements for miniature fuse-links.) |
| NF A36-321-2000 |
冷冲压用连续热镀锌的低碳钢制的板材和带钢.交货的技术条件 |
(Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming - Technical delivery conditions.) |
| NF T54-422-2003 |
塑料.农业和园艺用热塑性塑料薄膜覆盖物 |
(Plastics - Mulching thermoplastic films for use in agriculture and horticulture.) |
| NF J95-045-2-2003 |
小艇.通海旋塞及贯穿艇体配件.第2部分:非金属的 |
(Small craft - Seacocks and through-hull fittings - Part 2 : non-metallic.) |
| NF C58-431-1993 |
固定式铅酸蓄电池.一般要求和试验方法.第1部分:开孔透气型 |
(Stationary lead-acid batteries. General requirements and methods of test. Part 1 : vented types.) |
| NF C42-321-1996 |
热电偶.第1部分:参照表 |
(Thermocouples. Part 1 : reference tables.) |
| NF C26-220-1980 |
绝缘材料的试验方法.潮湿条件下固体绝缘材料的电阻指数和渗透特性的测定方法 |
(Method of testing insulating materials. Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions.) |
| NF S31-022-2000 |
声学.用声压测定噪声源的声功率级.混响室的精确法 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms.) |
| NF T94-365-1997 |
生活用水处理用化学制品.磷酸钠 |
(Chemicals used for treatment of water intended for human consumption. Sodium polyphosphate.) |
| NF C46-401-1993 |
工业过程控制系统用模拟信号控制器.第1部分:性能评估方法 |
(Controllers with analogue signals for use in industrial-process control systems. Part 1 : methods of evaluating the performance.) |
| NF C54-109-1996 |
额定电压在1000v以下含1000V的交流自恢复型并联电容器.第2部分:老化试验、自恢复试验和破坏性试验 |
(Shunt power capacitors of the self-healing type for A.C. Systems having a rated voltage up to and including 1 kv. Part 2 : ageing test self-heating test and destruction test.) |
| NF C26-113-8-1996 |
云母基绝缘材料规范.第3部分:单项材料规范.第8活页:抗燃安全电缆用云母纸带 |
(Insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 8 : mica paper tapes for flame-resistant security cables.) |
| NF T90-377-2000 |
水质.Brachionus calyciflorus48小时慢性毒性测定.种群生长抑制试验 |
(Water quality - Determination of chronic toxicity to Brachionus calyciflorus in 48 h - Population growth inhibition test.) |
| NF C26-240-1993 |
测定由表面放电击穿绝缘材料的相对电阻的推荐性测定方法 |
(Recommanded test methods for determining the relative resistance of insulating materials to breakdown by surface discharges.) |
| NF C93-643-400-2003 |
绝缘软管.第3部分:各种型号软管的规范要求.第400至402篇:带有机硅橡胶涂层的玻璃纤维织物软管 |
(Flexible insulating sleeving - Part 3 : specification requirements for individual types of sleeving - Sheets 400 to 402 : glass textile sleeving with silicone elastomer coating.) |
| NF C31-668-1995 |
特种绕组线规范.第18部分:聚乙烯醇乙醛漆包扁铜绕组线,120级 |
(Specifications for particular types of winding wires. Part 18 : polyvinyl acetal enamelled rectangular copper wire, class 120.) |
| NF C44-110-1995 |
2级交流电度表的验收方法 |
(Acceptance inspection of class 2 alternating-current watthour meters.) |
| NF C73-215-2002 |
烹调、烘烤和类似用途的家用便携式灶具.性能的测量方法 |
(Household portable appliances for cooking, grilling and similar use - Methods for measuring performance.) |
| NF C46-025-1-1996 |
过程测量和控制装置.性能评定的一般方法和程序.第1部分:一般考虑 |
(Process measurement and control devices. General methods and procedures for evaluating performance. Part 1 : general considerations.) |
| NF C18-400-1994 |
在交流电1000V和直流电1500V的情况下带电作业用的手工工具 |
(Hand tools for live working up to 1000 A.C. And 1500 V D.C.) |
| NF D13-104-1997 |
散热片.连接尺寸 |
(Kitchen sinks. Connecting dimensions.) |
| NF C01-821-1999 |
电工词汇.第821章:铁路信号和安全设备? |
(Electrotechnical Vocabulary. Chapter 821 : signalling and security apparatus for railways.) |
| NF P16-250-1-2000 |
建筑物内的重力排水系统.第1部分:一般和性能要求 |
(Gravity drainage systems inside buildings - Part 1: general and performance requirements.) |
| NF C23-518-1996 |
防爆电气设备.防爆外壳“D“ |
(Electrical apparatus for potentially explosive atmospheres. Flameproof enclosures “D“.) |
| NF C93-400-1-100-2001 |
电子设备用连接件.试验和测量.第1-100部分:通则.可应用的出版物 |
(Connectors for electronic equipment - Tests and measurements - Part 1-100 : general - Applicable publications.) |
| NF P21-302-1995 |
木结构.结构木材和胶合板.某些物理性能和机械性能的测定 |
(Timber structures. Structural timber and glued laminated timber. Determination of som physical and mechanical properties.) |
| NF U47-034-2002 |
动物卫生分析方法.用微量培养板慢凝集反应方法检测鸡血清中家禽鸡白痢菌沙门氏菌素的专门抗体 |
(Animal health analysis methods - Detection of antibodies specific for Salmonella Pullorum Gallinarum in hen serum by slow microplate agglutination.) |
| NF E49-080-1-2002 |
气压液动.五通定向控制阀.第1部分:不带电连接器的安装接口 |
(Pneumatic fluid power - Five-port directional control valves - Part 1 : mounting interfaces without electrical connector.) |
| NF P51-401-1999 |
烟囱.粘土/混凝土烟气线.要求和试验方法(EN 1457) |
(Chimneys. Clay/Ceramic Flue Liners. Requirements and test methods.) |
| NF C73-880-2000 |
家用和类似用途电器的安全.第2-80部分:风扇的特殊要求 |
(Safety of household and similar electrical appliances - Part 2-80 : particular requirements for fans.) |
| NF V03-924-1-2000 |
含油种子残留物.油含量测定.第1部分:己烷(或石油醚)萃取法 |
(Oilseed residues - Determination of oil content - Part 1 : extraction method with hexane (or light petroleum).) |
| NF C20-731-1994 |
基本环境测试第2部分:试验方法.EC试验和指南摔倒.材料上第一落点的试验 |
(Basic environmental testing procedures. Part 2 : tests. Test Ec : drop and topple, primarily for equipment-type specimens.) |
| NF P94-310-1999 |
专业土工工程的执行.边桩 |
(Execution of special geotechnical work. Bored piles.) |
| NF S61-931-2000 |
防火安全系统.一般要求 |
(Fire Safety Systems - General requirements.) |
| NF C03-253-1994 |
电技术用文献的制备.第3部分:连接示意图、表及目录 |
(Preparation of documents used in electrotechnology. Part 3 : connection diagrams, tables and lists.) |
| NF C26-145-3-4-1995 |
电工用塑料薄膜规范.第3部分:各别材料规范.第4-6活页:电绝缘用聚酰亚胺薄膜要求 |
(Specification for plastic films for electrical purposes. Part 3 : specifications for individual materials. Sheets 4 to 6 : requirements for polyimide films used for electrical insulation.) |
| NF C93-643-320-2003 |
绝缘软管.第3部分:各种型号软管规范.第320篇:轻度浸渍的聚对苯二甲酸乙二醇酯编织物 |
(Flexible insulating sleeving - Part 3 : specifications requirements for individual type of sleeving - Sheet 320 : polyethylene terephthalate textile sleeving, lightly impregnated.) |
| NF B51-124-1993 |
木基板.弯曲和弯曲强度时弹性模量的测定 |
(Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.) |
| NF C20-745-1993 |
环境试验.第2部分:试验.Xa试验和导则:清洁溶剂浸设试验 |
(Environmental testing. Part 2 : tests. Test Xa and guidance : immersion in cleaning solvents.) |
| NF L52-400-508-2003 |
航空航天系列.飞行器用光纤和光缆.试验方法.第508部分:扭转力 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 508 : torsion.) |
| NF T47-273-2002 |
无气涂漆用橡胶和/或塑料软管和软管组件.规范 |
(Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification.) |
| NF C30-203-1994 |
导线和绝缘电缆.导线和绝线电缆的尺寸特性测定.计算方法 |
(Insulated cables and flexible cords. Determination of dimensions of insulated cables and flexible cords calculation methods.) |
| NF C42-360-1992 |
交流电量转换成模拟信号或数字信号用的电气测量变换器 |
(Electrical measuring tranducers for converting A.C. Electrical quantities to analogue or digital signals.) |
| NF C46-613-1994 |
可编程控制器.第1部分:一般信息 |
(Programmable controllers. Part 1 : general information.) |
| NF C20-003-9-1993 |
环境条件分类.第3部分:环境参数组及其严酷程度分类.第9节:产品中的小气候 |
(Classification of environmental conditions. Part 3 : classification of groups of environmental parameters and their severities. Section 9 : microclimats inside products.) |
| NF E65-100-1-2000 |
手持非电动工具.安全要求.第1部分:非螺纹机器紧固件的组件动力工具 |
(Hand-held non-electric power tools - Safety requirements - Part 1 : assembly power tools for non-threaded mechanical fasteners.) |
| NF C60-000-1993 |
家用及类似用途的低压电路的连接装置.第1部分:一般要求 |
(Connecting devices for low voltage circuits for household and similar purposes. Part 1 : general requirements.) |
| NF C42-721-1994 |
测量,控制和实验室用电气设备的安全要求.第2-020部分:实验室离心机特殊要求 |
(Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-020 : particular requirements for laboratory centrifuges.) |
| NF P16-250-5-2000 |
建筑物内的重力排水系统.第5部分:安装和试验.操作维护和使用指南 |
(Gravity drainage systems inside buildings - Part 5 : installation and testing, instructions for operation, maintenance and use.) |
| NF C51-114-1996 |
旋转电机.第4部分:同步电机参数的试验测定方法 |
(Rotating electrical machines. Part 4 : methods for determining synchronous machine quantities from tests.) |
| NF C26-168-2-1995 |
电工用工业刚性圆热固树脂层压管和棒材-第3部分:专用材料规范-活页2:圆层压压制管 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 2 : round laminated moulded tubes.) |
| NF T30-071-6-2002 |
涂料和清漆.评估涂料模降解.一般性缺陷的程度、量值和大小的规定.第6部分:用胶带法评定粉化等级 |
(Paints and varnishes - Evaluation of degradation of paints coatings - Designation of intensity, quantity and size of common types of defects - Part 6 : rating of degree of chalking by tape method.) |
| NF C31-674-1995 |
特种绕组线规范.第24部分:涂覆聚酰胺的聚酯或聚酰胺酯漆包圆铝绕组线,180级 |
(Specifications for particular types of winding wires. Part 24 : polyester or polyesterimide enamelled round aluminium wire overcoated with polyamide, class 180.) |
| NF S72-501/A1-2000 |
工业用安全帽 |
(Industrial safety helmets.) |
| NF C26-112-1997 |
云母基绝缘材料规范.第2部分:试验方法? |
(Specification for insuslating materials based on mica. Part 2 : methods of test.) |
| NF T51-911-2001 |
塑料.伊兆特(Izod)冲击强度的测定 |
(Plastics - Determination of Izod impact strength.) |
| NF C32-201-5/A1-2000 |
额定电压达到和包括450/750V的聚氯乙烯绝缘电缆.第5部分:柔性电缆 |
(Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5 : flexible cables.) |
| NF P19-828-1999 |
预制混凝土制品.玻璃纤维增强水泥的工厂生产控制的一般规则 |
(Precast concrete products - General rules for factory production control of glass-fibre reinforced cement.) |
| NF P62-125-1998 |
弹力纺织地板覆盖物.电阻的测定 |
(Resilient floor coverings. Determination of the electrical resistance.) |
| NF C51-150-1965 |
三相感应电动机.“全封闭”型.短路转子.E类 |
(Totally-enclosed three-phase induction motors with short-cicuited rotors. Class E.) |
| NF C20-003-7/A1-1997 |
NF EN 60721-3-7-1995的修改件 A1 |
() |
| NF C27-225-1978 |
绝缘物质的试验方法.新矿物绝缘油中芳香烃含量的测定 |
(Determination of the aromatic hydrocarbon content of new mineral insulating oils.) |
| NF T90-385-2001 |
水质.淡水鱼和海水鱼中EROD酶活性的测量方法 |
(Water quality - Method for measuring the EROD enzyme activity in freshwater and saltwater fish.) |
| NF P62-123-1998 |
弹性的地板覆盖物.自位轮负载效果的测定 |
(Resilient floor coverings. Determination of the effect of loaded heavy duty castors.) |
| NF D36-402-2000 |
建筑阀门.膨胀组.试验和要求 |
(Building valves - Expansion groups - Tests and requirements.) |
| NF C51-112-1975 |
旋转电机.旋转电机试验后的损耗和效率的测定方法 |
(Rotating electrical machines methods for determining losses and efficiency of rotating electrical machinery from tests.) |
| NF C01-541-1992 |
电工词汇.第541章:印制电路板 |
(Electrotechnical vocabulary. Chapter 541 : printed circuits.) |
| NF C20-727-1994 |
基本环境测试.第2部分:试验.EA试验指南:冲击 |
(Basic environmental testing procedures. Part 2 : tests. Test Ea and guidance : shock.) |
| NF X50-910-2000 |
水疗法的创立.术语 |
(Hydropathic establishments (Spas) - Terminology.) |
| NF P84-129-1-1999 |
防水用柔性薄板.视觉上缺陷的测定.第1部分:屋顶防水用沥青片 |
(Flexible sheets for waterproofing - Determination of visible defects - Part 1 : bitumen sheets for roof waterproofing.) |
| NF C93-329-2000 |
U型和E型铁氧体磁芯的标记 |
(Marking on U and E ferrites cores.) |
| NF C46-952-1993 |
遥控设备及装置.第5部分:传输协议.第2单元:网络传输程序 |
(Telecontrol equipment and systems. Part 5 : transmission protocols. Section 2 : link transmission procedures.) |
| NF P82-701-1998 |
电磁兼容性.电梯,升降梯和载人电梯产品系列标准.辐射性 |
(Electromagnetic compatibility. Product family standard for lifts, escalators and passenger conveyors. Emission.) |
| NF P75-410-2002 |
建筑物用的绝热制品.工厂制作的膨胀的珍珠岩产品.规范 |
(Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification.) |
| NF C46-905-1994 |
单边带电力线载波终端机 |
(Single sideband power-line carrier terminals.) |
| NF C31-667-1995 |
特种绕组线规范.第17部分:105级聚乙烯醇乙醛漆包扁铜绕组线 |
(Specifications for particular types of winding wires. Part 17 : polyvinyl acetal enamelled rectangular copper wire, class 105.) |
| NF C26-113-6-1995 |
云母基绝缘材料规范.第3部分:单项材料规范.第6活页:用B级环氧树脂粘合剂粘结的玻璃纤维织物衬底云母纸 |
(Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 6 : glass-backed mica paper with a B-stage epoxy resin binder.) |
| NF C43-806-1994 |
激光产品的安全.第2部分:光纤通信系统的安全 |
(Safety of laser products. Part 2 : safety of optical fibre communication systems.) |
| NF C51-318-31-1995 |
旋转电机.第18部分:绝缘体系的功能评定.第31节:模绕绕组线的试验程序.机器的最在功率为50MVA电压为15kV的绝 |
(Rotating electrical machines. Part 18 : functional evaluation of insulation systems. Section 31 : test procedures for form-wound windings. Thermal evaluation and classification of insulation systems used in machines up to and including 50 mva and 15 kv.) |
| NF C42-503-1993 |
仪表用变压器.第3部分:组合变压器 |
(Instrument transformers. Part 3 : combined transformers.) |
| NF C31-690-1995 |
特种绕组线规范.第40部分:温度指数为200的玻璃纤维编织的,硅氧烷漆处理过的裸线或漆包扁铜绕组线 |
(Specification for particular types of winding wires. Part 40 : glass-fibre braided, silicone varnish-treated, bare or enamelled rectangular copper wire, temperature index 200.) |
| NF C60-436-1994 |
小型熔断器.第6部分:小型管状熔断体用熔断器支持件 |
(Miniature fuses - Part 6 : fuse-holders for miniature cartridge fuse-links.) |
| NF C42-145-1994 |
电工测量仪器.X-t型记录仪.第1部分:定义和要求 |
(Electrical measuring instruments. X-T recorders. Part 1 : definitions and requirements.) |
| NF C31-023-6-1998 |
绕阻线.试验方法.第6部分:热特性 |
(Winding wires. Test methods. Part 6 : thermal properties.) |
| NF C27-233-1990 |
汽轮机用磷酸盐酯调节流体的使用和维护指南 |
(Maintenance and use guide for triaryl phosphate ester turbine control fluids.) |
| NF C01-704-1994 |
电工词汇.第704章:传输 |
(Electrotechnical vocabulary. Chapter 704 : transmission.) |
| NF C46-954-1994 |
遥控设备及装置.第5部分:传输协议.第4节:应用信息元件的定义及编码 |
(Telecontrol equipment and systems. Part 5 : transmission protocols. Section 4 : definition and coding of application information elements.) |
| NF C31-663-1995 |
特种绕组线规范.第13部分:用聚酰胺-酰亚胺涂覆聚酯或聚酰胺酯漆包的圆铜绕组线,200级 |
(Specifications for particular types of winding wires. Part 13 : polyester or polyesterimide overcoated with polyamide-imide.) |
| NF R63-202-2000 |
道路车辆.汽车车库工具.发动机RPM转速计.总规范 |
(Road vehicles - Garage equipment - Engine RPM tachometer - General specifications.) |
| NF C20-922-1994 |
火险试验.第2部分:试验方法.第2节:针型火焰燃烧试验 |
(Fire hazard testing. Part 2 : test methods. Section 2 : needle-flame test.) |
| NF C01-716-1-1997 |
电工词汇.第716-1章:综合数字服务网(ISDN).第1部分:一般特性 |
(Electrotechnical vocabulary. Chapter 716-1 : integrated services digital network (ISDN). Part 1 : general aspects.) |
| NF C01-161-1999 |
电工词汇.第161章:电磁兼容性 |
(Electrotechnical Vocabulary. Chapter 161 : electromagnetic compatibility.) |
| NF E64-603-1997 |
木工机械的安全.单面去厚度刨床 |
(Safety of woodworking machines - One side thickness planing machines.) |
| NF S71-603-1994 |
救生衣和个人浮力装备.救生衣.100N |
(Lifejackets and personal buoyancy aids. Lifejackets 100 N.) |
| NF B53-621-1-1995 |
锯材.硬木的表面分级.第1部分:橡木和水青岗 |
(Sawn timber - Appearance grading of harwoods - Part 1 : oak and beech.) |
| NF G35-049-1997 |
织物地板铺面.外观变化的评估 |
(Textile floor coverings. Assessment of changes in appearance.) |
| NF H96-313-2002 |
工业载重汽车的安全.测量振动用试验方法 |
(Safety of industrial trucks - Test methods for measuring vibration.) |
| NF E49-080-2-2002 |
气压液动.五通方向控制阀.第2部分:任选电气连接器的安装接口面 |
(Pneumatic fluid power - Five-port directional control valves - Part 2 : mounting interface surfaces with optional electrical connector.) |
| NF C27-228-1-1995 |
电工用非纤维素纸.第1部分:定义和一般要求 |
(Non-cellulosic papers for electrical purposes. Part 1 : definitions and general requirements.) |
| NF P16-321-2-1992 |
管、陶土配件及上水与排水管的安装.第2部分:质量监督和采样(EN 295-2) |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 2 : quality control and sampling.) |
| NF H60-135-2003 |
包装.能量恢复率.定义和计算方法 |
(Packaging - Rate of energy recovery - Definition and method of calculation.) |
| NF Z85-632-2002 |
传输和多路转换(TM).在频率范围:24.25GHz～29.50GHz和31.0GHz～31.8 GHz.工作的模拟视频信号的传输用固定无 |
(Transmission and Multiplexing (TM) - Fixed radio link equipment for the transmission of analogue video signals operating in the frequency bands 24,25 GHz to 29,50 GHz and 31,0 GHz to 31,8 GHz.) |
| NF E65-100-7-2002 |
手持非电动工具.安全要求.第7部分:磨床 |
(Hand-held non-electric power tools - Safety requirements - Part 7 : grinders.) |
| NF C26-209-1985 |
制订评价电气绝缘系统耐热性的试验方法指南 |
(Guide for the preparation of test procedures for evaluating the thermal endurance of electrical insulation systems.) |
| NF C42-104-1990 |
直接指示电测仪表及其附件.相位计、功率因数指示计和LEOSYNCHRONOSOPES 的特殊规定 |
(Direct acting indicating analogue electrical measuring instruments and their accessories. Part 5 : special requirements for phase meters, power factor meters and synchronoscopes.) |
| NF P52-211-1/A1-2000 |
DTU 65.3.建筑工程.压力热水的热交换装置.技术规范 |
(DTU 65.3 - Building works - Heat exchange installations for pressurised hot water - Part : Technical specifications.) |
| NF C73-824/A53-2000 |
家用和类似用途电器的安全.第2-24部分:冰箱、食品冷冻机和制冰机的特殊要求 |
(Safety of household and similar electrical appliances - Part 2 -24 : particular requirements for refrigerators, food-freezers and ice-makers.) |
| NF C93-850-1-1-2002 |
光学纤维电缆.第1-1部分:总规范.总则 |
(Optical fibre cables - Part 1-1 : generic specification - General.) |
| NF P62-404-1999 |
弹性地板覆盖物.填塞衬底规范 |
(Resilient floor coverings - Specification for corkment underlay.) |
| NF C20-758-1990 |
环境试验.试验方法.TD试验可钎焊性敷镀金属抗溶性和表面元件抗焊接热强度测定 |
(Environmental testing. Test methods. Test Td : solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (smd).) |
| NF P84-127-1-1999 |
防水用柔性薄板.长度宽度和垂直度的测定.第1部分:屋顶防水用沥青片 |
(Flexible sheets for waterproofing - Determination of length, width and straightness - Part 1 : bitumen sheets for roof waterproofing.) |
| NF C51-116-1995 |
旋转电机.第6部分:冷却法 |
(Rotating electrical machines. Part 6 : methods of cooling (ic code).) |
| NF C01-603-1987 |
电工技术词汇.第603章:发电、输电和配电.电力系统规划和管理 |
(Electrotechnical vocabulary. Chapter 603 : generation, transmission and distribution of electricity. Power system planning and management.) |
| NF C01-321-1987 |
电工词汇.３２１章.测量用变压器 |
(Electrotechnical vocabulary. Chapter 321 : instrument transformers.) |
| NF C61-480-1993 |
家用及类似用途机电接触器 |
(Electromechanical contactors for household and similar purposes.) |
| NF P94-430-1-2000 |
岩石.岩石磨耗性的测定.第1部分:使用指定工具的schratching试验 |
(Rock - Determination of the rock abrasiveness - Part 1 : schratching-test with a pointed tool.) |
| NF T70-630-4-2003 |
民用爆炸物.引爆线和安全引信.第4部分:测定引爆线的冲击敏感性 |
(Explosives for civil uses - Detonating cords and safety fuses - Part 4 : determination of sensitiveness to impact of detonating cords.) |
| NF C20-090-1994 |
人-机界面.操作规则 |
(Man-machine interface (mmi). Actuating principles.) |
| NF C31-689-1995 |
特种绕组线规范.第39部分:温度指数为180的玻璃纤维编织的,聚酯或聚酰胺酯漆处理过的裸线或漆包扁铜绕组线 |
(Specifications for particular types of winding wires. Part 39 : glass-fibre braided, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index 180.) |
| NF C61-440-1995 |
家用和类似用途的带整体过电流保护装置的剩余电流驱动式断路器(rcbo`S).第1部分:一般要求 |
(Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (rcbo`S). Part 1 : general requirements.) |
| NF P92-520-2002 |
建筑材料的对火反应试验.不可燃性试验 |
(Reaction to fire tests for building products - Non-combustibility test.) |
| NF C27-221-1995 |
绝缘液.工业频率下击穿电压的测定.试验方法 |
(Insulating liquids. Determination of the breakdown voltage at power frequency. Test method.) |
| NF C46-004-1997 |
工业过程测量与控制设备运行条件.腐蚀性和糜烂性影响 |
(Operating conditions for industrial-process measurement and control equipment. Part 4 : corrosive and erosive influences.) |
| NF C46-205-1994 |
金属封壳的热电流表 |
(Dimensions of metal-sheathed thermometer elements.) |
| NF C31-665-1995 |
特种绕组线规范.第15部分:180级聚酰胺酯漆包圆铝绕组线 |
(Specifications for particular types of winding wires. Part 15 : polyesterimide enamelled round aluminium wire, class 180.) |
| NF B54-114-4-1996 |
碎料板.规范.第4部分:用于干燥条件下的负荷板的要求 |
(Particleboards. Specifications. Part 4 : requirements for load-bearing boards for use in dry conditions.) |
| NF P62-114-2-1999 |
弹性地板覆盖物.耐磨性测定.第2部分:FRICK-TABER试验 |
(Resilient floor coverings. Determination of wear resistance. Part 2 : Frick-Taber test.) |
| NF B54-114-1-1996 |
碎料板.规范.第1部分:所有板型总要求 |
(Particleboards. Specifications. Part 1 : general requirements for all board types.) |
| NF E64-605-1997 |
木工机械的安全.组合式木工机械 |
(Safety of woodworking machines - Combined woodworking machines.) |
| NF P21-359-1995 |
建筑用木料.分级.机械强度、分级木料和分级机的要求 |
(Structural timber. Grading. Requirements for machine strength graded timber and grading machines.) |
| NF C46-525-1991 |
工业过程用调节阀,调节阀门的限定栅屏? |
(Industrial-process control valves. Control valve data sheet.) |
| NF P19-829-5-1998 |
预制混凝土产品.玻璃纤维增强水泥的试验方法.第5部分:弯曲强度的试验.完全弯曲试验方法 |
(Precast concrete products. Test method for glass-fibre reinforced cement. Part 5 : measuring bending strength, “Complete bending test“ method.) |
| NF E52-142-1986 |
起重配件.L级螺纹竖钩环 |
(Lifting accessories. Screwed bow shackles. Grade L.) |
| NF T94-301-1999 |
处理人类饮用水的化学品.次氯酸钙 |
(Chemicals used for treatment of water intended for human consumption - Calcium hypochlorite.) |
| NF C26-251-1980 |
绝缘材料的试验方法.电绝缘材料用塑料薄膜和塑料纸摩擦系数的测定方法 |
(Methods of testing insulating materials. Method of test for coefficients of friction of plastic film and sheeting for use as electrical insulation.) |
| NF U36-101-2003 |
食品加工机械.农家散装奶冷却器.使用、安全和卫生用结构、性能和适用性要求 |
(Food processing machinery - Bulk milk coolers on farms - Requirements for construction, performance, suitability for use, safety and hygiene.) |
| NF C01-726-1988 |
电工词汇.726章:输电线和波导 |
(Electrotechnical vocabulary. Chapter 726 : transmission lines and waveguides.) |
| NF C20-732-1994 |
基本环境试验规程.第2部分:试验.第32节:试验Ed:自由跌落 |
(Basic environmental testing procedures. Part 2 : tests. Test Ed : free fall.) |
| NF C32-201-3/A1-2000 |
额定电压450/750V(包括450/750V)以下的聚氯乙烯绝缘电缆.第3部分:固定布线用无护套电缆 |
(Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3 : non-sheathed cables for fixed wiring.) |
| NF H34-037-2000 |
塑料汽油桶.托板尺寸为800mm x 1200mm,1000mm x 1200mm,1140mm x 1140mm的优选利用的20升和60升标称容量的 |
(Plastics jerricans - Jerricans with a nominal capacity of 20 l a 60 l for optimal utilization of pallets sizes 800 mm x 1200 mm, 1000 mm x 1200 mm et 1140 mm x 1140 mm.) |
| NF A89-101-2-2002 |
焊接.金属材料焊接的推荐规范.第2部分:铁素体钢的电弧焊 |
(Welding - Recommendations for welding of metallic materials - Part 2 : arc welding of ferritic steel.) |
| NF C01-191-1992 |
电工技术词汇.第191章:可靠性和运行质量 |
(Electrotechnical vocabulary. Chapter 191 : dependability and quality of service.) |
| NF C90-301-4/A1-1996 |
NF EN 60835-1-4-1996的修改1 |
() |
| NF Z83-547-1997 |
数字蜂窝通信系统(第2阶段).命令建议(AOC)的增补服务.第2阶段(GSM 03.86) |
(Digital cellular telecommunications system (Phase 2). Advice of Charge (AoC) supplementary services. Stage 2 (GSM 03.86).) |
| NF G08-001-2-1987 |
纺织.纤维和纱线.发货商品质量的测定.第2部分:实验室样品取法 |
(Textiles. Fibres and yarns. Determination of commercial mass of consignments. Part 2 : methods for obtaining laboratory samples.) |
| NF P52-306-1/A1-2000 |
DTU 65.20.线路,用具和附属物的热安装.高于室温的工作温度.第1部分:技术规范 |
(DTU 65.20 - Thermal insulation of circuits, appliances and accessories - Working temperature greater than ambient temperature - Part 1 : technical specifications.) |
| NF E04-524-5-2002 |
技术制图.表示的一般原则.第25部分:造船绘图线 |
(Technical drawings - General principles of presentation - Part 25 : lines on shipbuilding drawings.) |
| NF A35-505-3-1993 |
可焊细晶粒结构钢热轧制品.第2部分:热机轧制钢的交货条件 |
(Hot-rolled products in weldable fine grain structural steels. Part 3 : delivery conditions for thermomechanical rolled steels.) |
| NF E04-706-1989 |
管状记录笔.圆规衔接器 |
(Tubular technical pens. Adaptor for compasses.) |
