| 标准号 |
中文名 |
英文名 |
| NF D35-322/A1-2001 |
配备气燃炉供应家用热水的即时燃气热水器 |
(Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners.) |
| NF L92-110-1966 |
飞行器地面牵引杆 |
(TOWBARS FOR GROUNDED AIRCRAFT.) |
| NF X31-425-2003 |
土质.测定有机污物用试样的预处理 |
(Soil quality - Pretreatment of samples for determination of organic contaminants.) |
| NF T57-225-1997 |
塑料管道系统.玻璃纤维增强热固性塑料元件.验证胶合管套筒接头设计的测试方法 |
(Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of cemented socket-and-spigot joints.) |
| NF T54-935-1997 |
塑料管道系统.比色法测定热塑材料的含水量 |
(Plastics piping systems. Determination of moisture content in thermoplastics by coulometry.) |
| NF C51-312-2003 |
旋转电机.第12部分:单速三相笼型感应电动机的起动性能 |
(Rotating electrical machines - Part 12 : starting performance of single-speed three-phase cage induction motors.) |
| NF P21-360-2002 |
指接结构木材.性能要求和最低生产要求 |
(Finger jointed structural timber - Performance requirements and minimum production requirements.) |
| NF P41-302-1994 |
纤维水泥制品.压力管道和接头(欧洲标准EN 512) |
(Fibre-cement products. Pressure pipes and joints.) |
| NF A51-121-2003 |
铜和铜合金.带固体覆层的预绝缘铜管 |
(Copper and copper alloys - Pre-insulated copper tubes with solid covering.) |
| NF E60-164-1988 |
通用移动式龙门铣床.验收条件和精确度检验 |
(Machine-tools. Plano-milling machines, portal type. Acceptance conditions and testing of accuracy.) |
| NF J95-026-1996 |
小型船舶.船体鉴定.编码体系 |
(Small craft. Hull identification. Coding system.) |
| NF E05-052-1998 |
几何制品规范(GPS).表面状态:截面法.接触(尖笔)装置的一般特性 |
(Geometrical product specifications (GPS) - Surface texture : profile method - Nominal characteristics of contact (stylus) instruments.) |
| NF L22-440-2000 |
航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.左旋ISO M或ISO MJ螺纹.４H公差级 |
(Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H tolerance class.) |
| NF C90-101-7-1996 |
电视和声音信号用电缆分线系统.第7部分:系统性能 |
(Cable networks for television signals, sound signals and interactive services - Part 7 : system performance.) |
| NF E60-103-1998 |
机床.卧式轴六角自动车床和卧式单轴自动车床的试验条件.精度试验 |
(Machine tools. Test conditions for horizontal spindle turret and single spindle automatic lathes. Testing of the accuracy.) |
| NF P72-510-2001 |
石膏块材用石膏基胶粘剂.定义、要求和试验方法 |
(Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods.) |
| NF E62-276-1985 |
组合机床通用部件.整体导轨立柱.落地式 |
(Modular units for machine tool construction. Integral way columns. Floor-mounted type.) |
| NF P50-766-2001 |
建筑元部件的湿热性能.防止临界表面潮湿和填隙式冷凝的内表面温度.计算方法 |
(Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods.) |
| NF S93-031-1/A1-2000 |
一次性无菌血管内导管.第1部分:一般要求 |
(Sterile, single-use intravascular catheters - Part 1 : general requirements.) |
| NF P32-304-2000 |
非连续屋顶和覆盖物的条板和石头产品.第2部分:试验方法 |
(Slate and stone products for discontinuous roofing and cladding - Part 2 : methods of test.) |
| NF X35-211-2002 |
热环境的人类工效学.词汇和符号 |
(Ergonomics of the thermal environment - Vocabulary and symbols.) |
| NF C90-101-2-2002 |
电视信号、声信号和交互型业务用电缆网络.第2部分:设备的电磁兼容性 |
(Cable networks for television signals, sound signals and interactive services - Part 2 : electromagnetic compatibility for equipment.) |
| NF E66-520-8-2000 |
切割工具的工作带.双工具材料.第8部分:在平面上钻孔的双工具材料方法学 |
(Working zones of cutting tools - Couple tool-material - Part 8 : couple tool-material methodology in drilling on plain.) |
| NF L46-021-2002 |
航空航天系列.O形密封环凹槽.尺寸 |
(Aerospace series - O-ring grooves - Dimensions.) |
| NF Z83-552-1997 |
蜂窝式数字通信系统(阶段2).移动站基础站系统(MS-BSS)接口.信道结构和检索能力(GSM 04.03) |
(Digital cellular telecommunications system (Phase 2). Mobile Station Base Station system (MS-BSS) interface. Channel structures and access capabilities (GSM 04.03).) |
| NF S77-102-2002 |
人的眼睛的保护.光学试验方法 |
(Personal eye-protection - Optical test methods.) |
| NF C31-093-1-2002 |
绕组线的封装.第3-1部分:锥形输出线轴.基本尺寸 |
(Packaging of winding wires - Part 3-1 : taper barelled delivery spools - Basic dimensions.) |
| NF X50-001-2-2-1999 |
发电站设备采购指南.第2部分:电气设备.第2节:不间断电源 |
(Guide for procurement of power station equipment - Part 2 : electrical equipment - Section 2 : Uninterruptible power supplies.) |
| NF T60-180-1996 |
原油和液体或固体石油产品.密度或相对密度的测定.毛细管塞阻比重瓶法和带刻度双毛细管比重瓶法 |
(Crude petroleum and liquid or solid petroleum products. Determination of density or relative density. Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods.) |
| NF Z84-340/A1-1999 |
无线电设备和系统.欧洲无线电信息系统服务网页用的电磁兼容性 |
(Radio Equipment and Systems (RES). Electro-Magnetic Compatibility (EMC) for European Radio Message System (ERMES) paging receivers.) |
| NF C93-334-1981 |
电子元件.供电用磁性氧化铁芯的尺寸（ＥＣ铁芯） |
(Electronic components. Dimensions for magnetic oxyde cores intended for use in power supplies (ec-cores).) |
| NF L54-002-127-2002 |
航空航天系列.电气及光学连接元件.试验方法.第6403部分:光学元件.振动 |
(Aerospace series - Elements of electrical and optical connection - Test methods - Part 6403 : optical elements - Vibrations.) |
| NF C46-503-1999 |
工业过程调节阀.第2-1部分:流量.在安装条件下液体流量的截面方程 |
(Industrial-process control valves. Part 2-1 : flow capacity. Sizing equations for fluid flow under installed conditions.) |
| NF C74-227-1996 |
医用电气设备.电光X-射线图象增强仪特性.第7部分:测定调制变压器传递函数 |
(Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 7 : determination of the modulation transfer function.) |
| NF C93-807-2-4-1998 |
光纤通信子系统基本试验程序.第2-4部分:数字系统的试验程序.比特速率公差测量 |
(Fibre optic communication subsystem basic test procedures. Part 2-4 : test procedures for digital systems. Bit-rate tolerance measurement.) |
| NF S62-225-2003 |
固定消防系统.喷头和喷水系统用元部件.第5部分:水流量测定器 |
(Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5 : water flow detectors.) |
| NF Z71-318-1993 |
信息处理.办公文件.文件的咨询和检索.第2部分:协议规范 |
(Information technology. Text and office systems. Document filing and retrieval (DFR). Part 2 : protocol specification.) |
| NF E90-453-2003 |
机械振动.为测定振动传导值对移动机械进行的试验 |
(Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value.) |
| NF Z70-051-6-1996 |
信息技术.开式系统互连.目录:选择属性型 |
(Information technology. Open systems interconnection. The directory : selected attribute types.) |
| NF H95-111-2000 |
连续装卸设备和系统.大宗材料的气动处理系统和元件的安全要求 |
(Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials.) |
| NF J38-130-1994 |
造船.海上雷达反射器 |
(SHIPBUILDING. MARINE RADAR REFLECTORS. (EUROPEAN STANDARD EN ISO 8729).) |
| NF T54-049-1977 |
塑料.聚乙烯管.管状聚乙烯基准密度的计算 |
(EVALUATION OF THE REFERENCE DENSITY OF POLYETHYLENE IN FORM OF A PIPES.) |
| NF F00-011-1973 |
通用铁路设备.绞接固定器件用特殊公差与配合.紧配合 |
(RAILWAY MATERIAL IN GENERAL. TOLERANCES AND FITS USED PARTICULARLY FOR FIXED PARTS OF ARTICULATIONS. INTERFERENCE FITS.) |
| NF T78-100-1971 |
防冻剂.水溶液的制备 |
(ANTIFREEZES. PREPARATION OF AQUEOUS SOLUTIONS.) |
| NF U26-137-1997 |
作物保护设备.农用喷雾器.总残留量的测定 |
(EQUIPMENT FOR CROP PROTECTION. AGRICULTURAL SPRAYERS. DETERMINATION OF THE VOLUME OF TOTAL RESIDUAL.) |
| NF M87-205-2003 |
石油和天然气工业.海上结构物的一般要求 |
(Petroleum and natural gas industries - General requirements for offshore structures.) |
| NF E04-701-2-1989 |
用绘图墨水的手持式描图纸专用笔的管状笔尖.第2部分:性能测试参数和测试条件 |
(Tubular tips for hand-held technical pens using india ink on tracing paper. Part 2 : performance, test parameters and test conditions.) |
| NF Z43-120-1986 |
缩微照相.缩微照相应用的图形符号 |
(Micrographics. Graphic symbols used in micrographics.) |
| NF P61-202-1-2003 |
DTU 52-1.施工.密封地板.第1部分:技术规范 |
(DTU 52.1 - Execution of work - Sealed flooring - Part 1 : technical specifications.) |
| NF U25-009-1990 |
耕地机具.中耕机刀片.固尺尺寸 |
(EQUIPMENT FOR WORKING THE SOIL. HOE BLADES. FIXING DIMENSIONS.) |
| NF X43-246-3-2000 |
工作场所空气.有毒气体和蒸汽的直接浓缩测量和直接测量的电气装置.第3部分:用于测量限定值范围之上的电气装 |
(Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3 : performance requirements for apparatus used for me) |
| NF G52-014-2003 |
皮革.物理和机械试验.撕裂力的测定.第2部分:双边撕裂 |
(Leather - Physical and mechanical tests - Determination of tear load - Part 2 : double edge tear.) |
| NF C23-554-1992 |
可燃性气体的检测和测量电器仪表.一般要求和试验方法 |
(Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods.) |
| NF E48-677-2002 |
液力传动.过滤器.差压对流量特性的评定 |
(Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow characteristics.) |
| NF E51-725-2002 |
建筑物的通风.气路终端设备.恒流和变流终端设备的气动试验和测定 |
(Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate terminal units.) |
| NF A00-500-1-1997 |
铸造.交货技术条件.第一部分:总论 |
(Founding. Technical conditions of delivery. Part 1 : general.) |
| NF F37-100-3-2003 |
铁路设施.油罐车.第3部分:压力下液化气用底部装卸式装置 |
(Railway applications - Tank wagons - Part 3 : bottom filling and emptying devices for gases liquefied under pressure.) |
| NF E48-704-1995 |
液压传动.箱顶回流过滤器用过滤器元件.尺寸 |
(Hydraulic fluid power. Filter elements for tank top return filters. Dimensions.) |
| NF E17-901-1-2003 |
仪表及其远程读数的通信系统.第1部分:数据交换 |
(Communication system for meters and remote reading of meters - Part 1: data exchange.) |
| NF T25-204-1-2002 |
增强材料.机织物规范.第1部分:名称与符号 |
(Reinforcement - Specifications for woven fabrics - Part 1 : designation.) |
| NF E86-700-3-2002 |
金属工业管道.第3部分:设计和计算 |
(Metallic industrial piping - Part 3 : design and calculation.) |
| NF A48-720-1999 |
建筑物排水用铸铁管和配件及其接头和附件.要求、试验方法和质量保证 |
(Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test methods and quality assurance.) |
| NF Z84-649-2003 |
数字增强无线远程通信(DECT).DETC分组无线电业务(DPRS) |
(Digital Enhanced Cordless Telecommunications (DECT) - DECT Packet Radio Service (DPRS).) |
| NF F51-101-1-2003 |
铁路设施.轨道.混凝土枕木和支撑架.第1部分:一般要求 |
(Railway applications - Track - Concrete sleepers and bearers - Part 1 : general requirements.) |
| NF E58-068-1999 |
土方机械.座椅安全带和座椅安全带固定件 |
(Earth-moving machinery. Seat belts and seat belt anchorages.) |
| NF P26-318/A1-2002 |
建筑五金.由水平把手或推板控制的紧急出口装置.要求和试验方法 |
(Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods.) |
| NF Z15-007-1-1995 |
识别卡.发证者的识别.第1部分:编号系统 |
(Identification cards. Identification of issuers. Part 1 : numbering system.) |
| NF P18-313-1996 |
混凝土、灰泥和薄浆混合料.试验方法.第4部分:混凝土泌水性的测定 |
(Admixtures for concrete, mortar and grout. Test methods. Part 4 : determination of bleeding of concrete.) |
| NF E51-718-1998 |
建筑物通风.气体终端设备.调节器和阀门的动力学试验 |
(Ventilation for buildings. Air terminal devices. Aerodynamic testing of dampers and valves.) |
| NF E01-012-2003 |
产品几何量技术规范(GPS).棱体的角度和斜度系列 |
(Geometrical Product Specifications (GPS) - Series of angles and sloppes on prisms.) |
| NF M60-003-2000 |
压缩天然气车辆操作 |
(Compressed natural gas vehicle operations.) |
| NF C51-111/A2-2001 |
旋转电机.第1部分:额定值及性能 |
(Rotating electrical machines - Part1 : rating and performance.) |
| NF V03-082-2003 |
食品.加压化解后用冷蒸汽原子吸收光谱测量法(CVAAS)测定汞 |
(Foodstuffs - Determination of trace elements - Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after pressure digestion.) |
| NF C97-298-1991 |
声像.视频和电视设备系统 |
(Audiovisual, video and television equipment and systems. Audio cassette systems.) |
| NF C93-013-1999 |
自动输送的元器件的包装.第1部分:带轴向引线的元器件在连续输送带上的带式包装 |
(Packaging of components for automatic handling - Part 1 : tape packaging of components with axial leads on continuous tapes.) |
| NF S31-079-2-2003 |
声学.阻抗管中吸声系数和比阻抗率的测量.第2部分:传递函数法 |
(Acoustics - Determination of sound absorption coefficient and impedance in impedance tubes - Part 2 : transfer-function method.) |
| NF C42-101-1990 |
直接指示电测仪表及其附件.电流表和电压表用的特殊规定 |
(Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2 : special requirements for ammeters and voltmeters.) |
| NF C90-301-2/A1-1996 |
NF EN 60835-1-2-1993的修改1 |
() |
| NF A92-105-1989 |
搪瓷.用碱性液体的试验用器具 |
(VITREOUS AND PORCELAIN ENAMELS. APPARATUS FOR TESTING WITH ALKALINE LIQUIDS.) |
| NF S52-393-2001 |
游泳池器械.第6部分:旋转板的附加特殊安全要求和检验方法 |
(Swimming pool equipment - Part 6 : additional specific safety requirements and test methods for turning boards.) |
| NF V37-043-1-2002 |
细切烟草及其烟制品.抽样、调节和分析方法.第1部分:抽样 |
(Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 1 : sampling.) |
| NF C46-811-420-2002 |
海上导航和无线电通信设备及系统.数字接口.第420部分:多通话器和多受话器.船舶系统互连.配套标准要求和基本 |
(Martitime navigation and radiocommunication equipment and systems - Digital interfaces - Part 420 : multiple talkers and multiple listeners - Ship systems interconnection - Companion standard requirem) |
| NF C26-148-11-1998 |
电工用压敏胶粘带.第3部分:单项材料规范.第11活页:纤维素质绉纹纸和带有橡胶热固胶粘剂的聚对苯二甲酸乙酯 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 11 : combined tapes made of creped cellulosic paper and polyethylene terephthalate film with rubber thermosetting adhesive.) |
| NF T94-110-2001 |
人类生活用水的处理用化学制剂.氯化铝铁(III)和氢氧氯化铝铁 |
(Chemicals used for treatment of water intended for human consumption - Aluminium iron (III) chloride and Aluminium iron (III) chloride (monomeric) hydroxide (monomeric).) |
| NF T94-360-1997 |
生活用水处理用化学制品.焦磷酸四钠 |
(Chemicals used for treatment of water intended for human consumption. Tetrapotassium pyrophosphate.) |
| NF B54-114-3-1996 |
碎料板.规范.第3部分:用于干燥条件下的室内装修(包括家具)用板材要求 |
(Particleboards. Specifications. Part 3 : requirements for boards for interior fitments (including furniture) for use in dry conditions.) |
| NF C47-746-1998 |
家用和类似用途的自动电控制设备.第2部分:家用和类似用途浮子式水位自动电控制器的特殊要求 |
(Automatic electrical controls for household and similar use. Part 2 : particular requirements for automatic electrical water level operating controls of the float type for household and similar applications.) |
| NF C43-803-1993 |
激光辐射功率和能量测量用探测器、仪器和设备 |
(Power and energy measuring detectors, instruments and equipment for laser radiation.) |
| NF L52-250-501-2002 |
航空航天系列.飞行器用电缆.试验方法.第501部分:动态开割试验 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501 : dynamic out-through.) |
| NF A81-410-1984 |
铝和铝合金.焊接、硬钎焊和钎焊.基础产品和焊条的选择 |
(ALUMINIUM AND ALUMINIUM ALLOYS. WELDING,BRAZING AND BRAZE WELDING. BASE MATERIALS AND SELECTION OF FILLER MATERIALS.) |
| NF C73-800/A6-1991 |
NF EN 60335-1-1989的修改2 |
() |
| NF C20-971-2000 |
着火危险试验.第7部分:将火中电工产品产生的毒性危害降至最小的指南.第1节:总则 |
(Fire hazard testing - Part 7 : guidance on the minimization of toxic hazards due to fires involving electrotechnical products - Section 1 : General.) |
| NF X06-048-1-1998 |
检测的能力.第1部分:术语和定义 |
(Capacity of detection. Part 1 : terms and definitions.) |
| NF E60-105-1984 |
单柱或双柱立式车床.验收条件和名称.第1部分:概述 |
(Acceptance conditions for vertical turning and boring lathes with one or two columns. Part 1 : general introduction.) |
| NF B38-152-1983 |
玻璃纤维.粗纱刚度的测定 |
(Textile glass. Determination of stiffness of rovings.) |
| NF P26-315-1997 |
建筑五金.水平棒操纵的应急出口装置.要求和试验方法 |
(Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods.) |
| NF C64-453-1992 |
充气高压开关和控制设备用锻钢外壳 |
(Wrought steel enclosures for gas-filled high-voltage switchgear and controlgear.) |
| NF S66-300-1-2002 |
潜在性爆炸环境中的非电气设备.第1部分:基本方法和要求 |
(Non-electrical equipment for potentially explosive atmospheres - Part 1 : basic method and requirements.) |
| NF C01-723-1992 |
电工词汇.第723章:广播:声音、电视和数据 |
(Electrotechnical vocabulary - Chapter 723 : broadcasting : sound, television, data.) |
| NF C96-013-4/A1-2002 |
半导体器件的机械标准化.第4部分:半导体器件封装外形图类型的划分和编码系统 |
(Mechanical standardization of semiconductor devices - Part 4 : coding system and classification into forms of package outlines for semiconductor device packages.) |
| NF E11-015-1991 |
长度测量仪表.球端标准参考测量杆 |
(Length measuring instruments. Standard reference measuring rods with spherical ends.) |
| NF C26-245-1990 |
绝缘漆热降低介电强度评价法.稳定性的试验方法 |
(Test procedure for thermal indurance of insulating varnishes. Electric strength method.) |
| NF C26-200-1973 |
绝缘材料试验方法.电气绝缘材料在试验前和试验中应遵循的条件 |
(Methods of testing insulating materials. Standard conditions for usterials.) |
| NF C61-503/A25-2001 |
灯头、灯座及检验其互换性和安全性的量规.第3部分:量规 |
(Lamps caps and holders together with gauges for the control of interchangeability and safety - Part 3 : gauges.) |
| NF X50-130-2000 |
质量管理系统.基础和词汇 |
(Quality management systems - Fundamentals and vocabulary.) |
| NF E29-752-2002 |
可运输储气瓶.无缝环箍全包封复合气瓶 |
(Transportable gaz cylinders - Seamless, hoop-wrapped composite cylinders.) |
| NF P26-323-1999 |
建筑物五金.门窗螺栓.要求和试验方法 |
(Building hardware - Door and window bolts - Requirements and test methods.) |
| NF U42-602-1-2002 |
肥料.水含量的测定(卡尔.费歇尔法).第1部分:甲醇作为萃取介质 |
(Fertilizers - Determination of water content (Karl Fischer methods) - Part 1 : methanol as extracting medium.) |
| NF C26-163-11-1993 |
电气绝缘用无溶剂可聚合树脂化合物规范.第3部分:单项材料规范.第11活页:环氧树脂基粉末涂料 |
(Specification for solventless polymerisable resinous compouds used for electrical insulation. Part 3 : specifications for individual materials. Sheet 11 : epoxy resin-based coating powders.) |
| NF T25-010-1997 |
增强纤维.机织织物.规范基础 |
(Reinforcement fibres - Woven fabrics - Basis for a specification.) |
| NF T47-220-2003 |
气焊机.焊接、切割和相关工艺用橡胶软管 |
(Gas welding equipment - Rubber hoses for welding, cutting and allied processes.) |
| NF H60-125-2003 |
包装及材料的回收.回收方法标准.回收处理的描述及流程图 |
(Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart.) |
| NF P61-603-1998 |
瓷砖粘结剂.敞露时间的测定 |
(Adhesives for tiles. Determination of open time.) |
| NF A04-315-2-1998 |
钢锻件的无损检验.第2部分:穿透试验 |
(Non-destructive testing of steel forgings. Part 2 : penetrant testing.) |
| NF G62-107-2002 |
鞋类.鞋帮和鞋衬的试验方法.水气渗透性和吸收性 |
(Footwear - Test methods for uppers and lining - Water vapour permeability and absorption.) |
| NF F66-077-1-2002 |
铁路设施.车辆电气设备.第1部分:一般应用条件和规则 |
(Railway applications - Electric equipment for rolling stock - Part 1 : general service conditions and general rules.) |
| NF H50-001-2002 |
材料搬运用平台板.主要尺寸 |
(Flat pallets for materials handling - Principal dimensions.) |
| NF P50-753-1-2001 |
门和窗的热性能.用热盒法对热传输的测定.第1部分:完整的门窗 |
(Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 1 : complete windows and doors.) |
| NF F42-152-3-2-2002 |
铁路设施.固定装置.交流电开关的特殊要求.第3-2部分:交流电牵引系统专用的测量、控制和保护设备.单相电流互 |
(Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-2 : measurement, control and protection devices for specific use in a.c. traction systems - Single pha) |
| NF C93-629-4-2001 |
评定质量的压电滤波器.第4部分:分规范.能力鉴定 |
(Piezoelectric filters of assessed quality - Part 4 : sectional specification - Capability approval.) |
| NF S71-606-1998 |
娱乐船上用的甲板安全带和安全线.安全要求和试验方法 |
(DECK SAFETY HARNESS AND SAFETY LINE FOR USE ON RECREATIONAL CRAFT. SAFETY REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 1095).) |
| NF E35-404-4-2000 |
制冷系统和热泵.安全和环境要求.第4部分:操作,维护,修理和恢复 |
(Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4 : operation, maintenance, repair and recovery.) |
| NF V59-105-1982 |
食用胶.金黄色葡萄球菌的检测 |
(Edible gelatine. Detection of {Staphylococcus} aureus.) |
| NF C86-811-1983 |
电子元件.ＣＥＮＥＬＥＣ质量保证体系.专用外壳温度可控硅.特殊规范 |
(Harmonized system of quality assessment for electronic components. Blank detail specification. Case-rated thyristors.) |
| NF E48-010-1984 |
液压传动.千斤顶.塞杆端部用内螺纹普通定位销和支座 |
(Hydraulic fluid power. Cylinder. Fork yoke and tenon for extremity of piston rod.) |
| NF R13-483-2002 |
道路车辆.点火装置用的连接器.点火装置和梁式连接器之间的连接接口 |
(Road vehicles - Connectors for pyrotechnic devices - Connection interface between pyrotechnic device and the beam connector.) |
| NF A04-162-3-2003 |
铸造.超声检验.第3部分:球墨铸铁铸件 |
(Founding - Ultrasonic examination - Part 3 : spheroidal graphite cast iron castings.) |
| NF M88-730-2003 |
手控LPG气瓶阀规范和试验 |
(Specification and testing of LPG cylinder valves - Manually operated.) |
| NF S62-224-2000 |
固定灭火系统.洒水器和喷水系统用元件.第4部分:水动警报器 |
(Fixed firefighting systems - Components for sprinkler and water spray systems - Part 4 : water motor alarms.) |
| NF M87-301-1-2001 |
石油和天然气工业.井水泥灌浆用水泥和材料.第1部分:规范 |
(Petroleum and natural gas industries - Cements and materials for well cementing - Part 1 : specification.) |
| NF X43-404-3-2002 |
室内空气.第3部分:甲醛和其它碳基化合物的测定.主动抽样法 |
(Indoor air - Part 3 : determination of formaldehyde and other carbonyl compounds - Active sampling method.) |
| NF C73-102-1997 |
家用和类似电气应用的安全.适用EN 60335和EN 60907范围内应用的例行试验的特殊规则 |
(Safety of household and similar electrical appliances. Particular rules for routine tests referring to appliances under the scope of EN 60335-1 and EN 60967.) |
| NF Z82-185-1-1996 |
综合业务数字网(ISDN).会议呼叫,扩充(CONF)的补充服务.数字用户信令系统No.1(DSS1)协议.第1部分:协议规范 |
(Integrated Services Digital Network (ISDN). Conference call, add-on (CONF) supplementary service. Digital subscriber signalling system number one (DSS1) protocol. Part 1 : protocol specification.) |
| NF G38-122-1999 |
土工织物及其产品.模拟磨损(滑块试验) |
(Geotextiles and geotextile-related products. Abrasion damage simulation (sliding block text).) |
| NF A49-285-1982 |
钢管.有质量要求的非合金或合金钢制对缝焊接椭圆底座.尺寸.交货技术条件 |
(Steel tubes. Unalloyed or alloy steel butt welding elliptic caps with quality requirements. Dimensions. Technical delivery conditions.) |
| NF E86-502-2-2003 |
低温容器.大体积可运输的真空绝缘容器.第2部分:设计、装配、检验和试验 |
(Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2 : design, fabrication, inspection and testing.) |
| NF C79-636-2003 |
电热装置的安全.第6部分:工业微波加热设备安全规范 |
(Safety in electroheat installations - Part 6 : specifications for safety in industrial microwave heating equipment.) |
| NF P74-202-1/A2-2000 |
DTU 59.2.建筑工程.基于水凝粘合剂的混凝土和灰浆上的厚的可塑性成品(TPF)工程.第1部分:技术规范 |
(DTU 59.2 - Building works - Work of thick plastic finisches (TPF) over concrete or plaster based on hydraulic binders - Part 1 : technical specifications.) |
| NF C71-239/A1-1996 |
NF EN 60929-1992的修改1 |
() |
| NF C42-330/A1-1996 |
NF EN 60751-1995的修改1 |
() |
| NF A49-313-1-2003 |
机械工程与综合工程学用无缝环形钢管.交货技术条件.第1部分:非合金和合金钢管 |
(Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1 : non-alloy and alloy steel tubes.) |
| NF C75-300-1996 |
手持电动工具的安全.第1部分:一般要求? |
(SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 50 144-1).) |
| NF P98-344-2003 |
粘土铺摊机.要求和试验方法 |
(Clay pavers - Requirements and test methods.) |
| NF C93-435/A1-1986 |
NF C 93-435-1984的补充件1 |
() |
| NF Z84-175-8-1999 |
无线电设备和系统(RES).数字增强无线通信(DECT).公共接口(CI).第8部分:语音编码和传输 |
(Radio Equipment and Systems (RES). Digital Enhanced Cordless Telecommunications (DECT). Common Interface (CI). Part 8 : speech coding and transmission.) |
| NF P98-440-2-1998 |
道路限制系统.第2部分:安全栏杆的性能等级、冲击试验验收标准和试验方法 |
(Road restraint systems. Part 2 : performance classes, impact test acceptance criteria and test methods for safety barriers.) |
| NF S91-137-1996 |
牙周刮匙、牙刮除器和牙钻孔器.第1部分:一般要求 |
(Periodontal curettes, dental scalers and excavators. Part 1 : general requirements.) |
| NF Z83-522-1996 |
蜂窝式数字通信系统(阶段2).网络结构(GSM 03.02) |
(Digital cellular telecommunications system (phase 2). Network architecture (GSM 03.02).) |
| NF M07-015-1998 |
石油产品.对铜的腐蚀作用.铜条试验 |
(Petroleum products. Corrosiveness to copper. Copper strip test.) |
| NF P21-351-2003 |
结构木材.尺寸和允许偏差 |
(Structural timber - Sizes, permitted deviations.) |
| NF B54-130-3-1996 |
水泥胶合碎料板.规范.第2部分:用于干躁、湿润和室外条件下的OPC胶合碎料板的要求 |
(Cement-bonded particleboards. Specifications. Part 2 : requirements for opc bonded particleboards for use in dry, humid and exterior conditions.) |
| NF E64-607-4-2001 |
木工机械的安全.圆盘锯机床.第4部分:带手工装卸的多刀片锯床 |
(Safety of woodworking machines - Circular sawing machines - Part 4 : multi-blade rip sawing machines with manual loading and/or unloading.) |
| NF T94-307-2001 |
人类用饮用水处理用化学品.二氧化氯 |
(Chemicals used for treatment of water intended for human consumption - Chlorine dioxide.) |
| NF P98-118-1991 |
路面层.粗砂.炉渣.定义.混合物.分类 |
(ROAD FOUNDATIONS. SLAG BOUND GRANULAR MATERIALS. DEFINITION. COMPOSITION. CLASSIFICATION.) |
| NF M07-037-2000 |
液体石油产品.钠含量的测定.原子吸收光度分光测定法 |
(Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method.) |
| NF D74-005-9-1994 |
商业冷藏柜.第9部分:电能消耗试验 |
(Refrigerated display cabinets. Part 9 : electrical energy consumption test.) |
| NF D90-102-2003 |
打火机.禁止儿童用打火机的安全要求和试验方法 |
(Lighters - Child-resistance for lighters - Safety requirements and test methods.) |
| NF A09-217-2-1997 |
无损检验.工业用X射线照相胶片.第2部分:用参考值对胶片工艺的控制 |
(Non-destructive testing. Industrial radiographic film. Part 2 : control of film processing by means of reference values.) |
| NF E90-325-1997 |
便携式手提动力工具.手柄振动测量.第7部分:扳手,旋具与具有冲击,冲力和刻踞齿作用的螺纹滚子 |
(Hand-held portable power tools. Measurement of vibrations at the handle. Part 7 : wrenches, screwdrivers and nut runners with impact, impulse or ratchet action.) |
| NF T57-901-1997 |
玻璃纤维增强塑料(GRP)制地下油罐.单面处于液体环境的试验方法 |
(Underground tanks of glass-reinforced plastics (GRP). Method for one side exposure to fluids.) |
| NF V03-122-1999 |
食品.谷类作物、带壳水果及衍生物中黄曲霉素B1含量和黄曲霉素B1、B2、G1和G2总量的测定.柱后衍生和免疫亲和 |
(Foodstuffs - Determination of aflatoxin b1 , and the sum of aflatoxins B1, B2, G1 and G2 in cereals, shell-fruits and derived products - High performance liquid chromatographic method with post column derivatization and immunoaffinity column clean up.) |
| NF Z83-578-1997 |
蜂窝式数字通信系统(阶段2).无线电子系统链接控制(GSM 05.08) |
(Digital cellular telecommunications system (phase 2). Radio subsystem link control (GSM 05.08).) |
| NF A09-217-1-1994 |
无损检验.工业用X射线照相胶片.第1部分:工业X射线照相用胶片体系的分类 |
(Non destructive testing. Industrial radiographic film. Part 1 : classification of film systems for industrial radiography.) |
| NF T47-255-1997 |
测量过的燃料分配用橡胶软管和软管部件规范 |
(Rubber hoses and hose assemblies for measured fuel dispensing. Specification.) |
| NF H92-100/A1-2003 |
铁轨加固和储藏设备.安全性 |
(Rail dependent storage and retrieval equipement - Safety.) |
| NF E25-151-2001 |
米制细牙螺纹的六角头螺钉.产品等级A和B |
(Hexagon head screws with metric fine pitch thread - Product grades A and B.) |
| NF X35-206-1995 |
热环境的人类工效学.衣服的隔热和耐蒸发的评定 |
(Ergonomics of the thermal environment. Estimation of the thermal insulation and evaporative resistance of a clothing ensemble.) |
| NF X43-332-2002 |
固定源辐射.利用工艺技术测定由溶剂产生的废气中全部气态有机碳的质量浓度.连续火焰离子化检测器法 |
(Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon at high concentrations in flue gases from solvent using processes - Continuous flame ionisation de) |
| NF C32-026/A1-2001 |
电缆和光缆绝缘和护套材料通用试验方法.第1-3部分:一般应用.密度测定方法.吸水试验.收缩试验 |
(Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-3 : general application - Methods for determining the density - Water absorption tests - Shrinkage test) |
| NF Z83-514-1996 |
数字蜂窝状电信系统(第2阶段).线路识别补充服务.第1阶段(GSM 02.81) |
(Digital cellular telecommunications system (phase 2). Line identification supplementary services. Stage 1 (GSM 02.81).) |
| NF E51-234-2003 |
石油、化学和气体设备工业.包装的整体式齿轮分离空气压缩机 |
(Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors.) |
| NF U02-105-4-2003 |
拖拉机、农林机械、动力草坪及园艺设备.操作者控制符号和其他显示符号.第4部分:林业机械用符号 |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 4 : symbols for forestry machinery.) |
| NF T73-402-1967 |
表面活性剂.胶体表观密度的测定 |
(SURFACE ACTIVE AGENTS. DETERMINATION OF APPARENT DENSITY OF PASTES.) |
| NF E58-120-1996 |
土方机械.安全.第6部分:自动倾卸车的要求 |
(EARTH-MOVING MACHINERY. SAFETY. PART 6 : REQUIREMENTS FOR DUMPERS. (EUROPEAN STANDARD EN 474-6).) |
| NF C31-687-2001 |
特种绕组线规范.第4部分:带粘合层的聚聚酰氨脂漆包圆铜绕组线180级 |
(Specifications for particular types of winding wires - Part 4 : polyesterimide enamelled round copper wire, class 180, with a bending layer.) |
| NF T94-401-1998 |
饮用水处理用化学试剂.改良淀粉 |
(CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. MODIFIED STARCHES. (EUROPEAN STANDARD EN 1406).) |
| NF A47-251-1-2002 |
钢丝绳接线端.安全.第1部分:钢丝绳吊索用穿线环 |
(Terminations for steel wire ropes - Safety - Part 1 : thimbles for steel wire ropes slings.) |
| NF P18-310-1998 |
混凝土添加剂.砖石和灰浆.试验方法.第1部分:试验用基准混凝土和混凝灰浆 |
(Admixtures for concrete, mortar and grout. Test methods. Part 1 : reference concrete and reference mortar for testing.) |
| NF C51-113-1997 |
旋转电机.第3部分:涡轮型同步机械的特殊要求 |
(Rotating electrical machines. Part 3 : specific requirements for turbine-type synchronous machines.) |
| NF C46-251-1994 |
气体分析仪性能表示.第1部分:通则 |
(Expression of performance of gas analyzers. Part 1 : general.) |
| NF C74-3351-1989 |
C 74-335-86的修改1 |
() |
| NF T35-020-2003 |
液体涂层材料用喷雾和喷射设备转换效率的测定.第1部分:平板 |
(Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Part 1 : flat panels.) |
| NF Z83-571-1998 |
数字蜂窝通信系统(相2).呼叫低限(CB)补充服务.第3步(GMS 04.88) |
(Digital cellular telecommunications system (Phase 2). Call barring (CB) supplementary services. Stage 3. (GSM 04.88).) |
| NF X50-001-6-9-2000 |
发电站设备采购指南.第6部分:涡轮机辅助设备.第9节:冷却水系统 |
(Guide for procurement of power station equipment - Part 6 : turbine auxiliaries - Section 9 : cooling water systems.) |
| NF T75-353-1998 |
榄香脂油 |
(Oil of elemi (Canarium luzonicum Miq.).) |
| NF Z63-416-2003 |
信息技术.自动识别和数据捕获技术.条形码打印质量测试规范.线性符号 |
(Information technology - Automatic identification and data capture techniques - Bar code print quality test specification - Linear symbols.) |
| NF B53-017-1984 |
木材.未采伐树体积的估计 |
(Wood. Estimate of the conversion volume of standing trees.) |
| NF P61-608-2003 |
瓷砖用胶粘剂.粘结剂和水泥浆的横向变形的测定 |
(Adhesives for tiles - Determination of transverse deformation for cementitious adhesives and grouts.) |
| NF S54-005-1-1999 |
家用转接设备.第1部分:安全要求 |
(Changing units for domestic use. Part 1 : safety requirements.) |
| NF L15-313-2002 |
航空航天系列.铝及铝合金拉制圆棒材.公差等级h11.直径4mm≤ D≤63mm.尺寸 |
(Aerospace series - Round bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm inferior or equal to D inferior or equal to 63 mm - Dimensions.) |
| NF S72-405-1996 |
空中运动用安全帽 |
(Helmets for airborne sports.) |
| NF M87-219-2002 |
石油和天然气工业.钻孔和生产设备.提升设备 |
(Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment.) |
| NF X35-111-1994 |
机械的安全.可触摸表面的温度.确定热表面温度极限值的人机工效学数据 |
(Safety of machinery. Temperatures of touchable surfaces. Ergonomics data to establish temperatur limit values for hot surfaces.) |
| NF T31-115-2000 |
涂料用补充剂.规范和试验方法.第18部分:沉淀硅酸铝钠 |
(Extenders for paints - Specifications and methods of test - Part 18 : precipitated sodium aluminium silicate.) |
| NF T66-034-2000 |
沥青和沥青粘合剂.试验样品制备 |
(Bitumen and bituminous binders - Preparation of test samples.) |
| NF A09-250-3-2002 |
无损检验.射线检验.第3部分:用X-射线和γ射线进行金属材料射线检验的一般原理 |
(Non-destructive testing - Radioscopic testing - Part 3 : general principles of radioscopic testing of metallic materials by X- and gamma rays.) |
| NF T54-928-1997 |
塑料管道系统.雨水排放管道系统用托架.托架强度的测试方法 12095) |
(Plastics piping system. Brackets for rainwater piping systems. Test method for bracket strength.) |
| NF E60-601-1997 |
机械装置的安全.激光加工机械.安全要求 |
(Safety of machinery. Laser processing machines. Safety requirements.) |
| NF C20-015-1995 |
电工设备外部自动碰撞的密封用提供保护的级别 |
(Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (ik code).) |
| NF P41-010-2000 |
供水.建筑物外供水的系统和部件的要求 |
(Water supply - Requirements for systems and components outside buildings.) |
| NF J95-022-1993 |
游艇.电气装置.对周围可燃气体引燃防护 |
(Small craft. Electrical devices. Protection against ignition of surrounding flammable gases.) |
| NF C74-121-2002 |
X射线成象诊断设备.通用和乳腺X射线照相的反散射栅的特性 |
(Diagnostic X-ray imaging equipment - Characteristics of general purpose and mammographic anti-scatter grids.) |
| NF X20-522-1997 |
天燃气.热值、密度和相对密度及化合物沃泊指数的计算 |
(Natural gas. Calculation of calorific values, density, relative density and Wobbe index from composition.) |
| NF P99-342-2001 |
道路信息和控制.道路控制语言.录像机检验和遥控 |
(Road information and control - Road control language - Video camera checking and remote control.) |
| NF S10-130-2-2001 |
集成光学.词汇.第2部分:用于分类的术语 |
(Integrated optics - Vocabulary - Part 2 : terms used in classification.) |
| NF P94-422-2001 |
岩石.拉伸强度的测定.间接法.Brazil试验 |
(Rock - Determination of the tensile strength - Indirect method - Brazil test.) |
| NF E31-402-1/A2-2002 |
非家用单个气体燃烧器架空辐射管式加热器.第1部分:安全性 |
(Single burner gas-fired overhead radiant-tube heaters for non-domestic use - Part 1 : safety.) |
| NF S72-509-1/A1-2002 |
防护头盔.试验方法.第1部分:条件和条件作用 |
(Protective helmets - Test methods - Part 1 : conditions and conditioning.) |
| NF S98-107-1-2002 |
医疗器械的消毒.对被标记“消毒“的医疗器械的要求.第1部分:对经终端消毒的医疗器械的要求 |
(Sterilization of medical devices - Requirements for medical devices to be designated STERILE - Part 1 : requirements for terminally sterilized medical devices.) |
| NF J95-046-1-2001 |
小型飞行器.壳的构造和建材尺寸.第1部分:材料.玻璃纤维增强参考层压热固树脂 |
(Small craft - Hull construction and scantlings - Part 1 : materials : thermosetting resins, glass-fibre reinforcement, reference laminate.) |
| NF M07-004-1998 |
石油产品.轻度和中度蒸馏燃料的木焦馏油的含量.喷射蒸发方法 |
(Petroleum products. Gum content of light and middle distillate fuels. Jet evaporation method.) |
| NF C52-558-2-23-2001 |
电力变压器、供电设备及类似设备的安全.第2-23部分;安装地点变压器的特殊要求 |
(Safety of power transformers, power supply units and similar devices - Part 2-23 : particular requirements for transformers for construction sites.) |
| NF P72-204-1-1993 |
建筑工程.内部绝缘和墙衬用石膏板.第1部分:技术规范 |
(DTU 25-42. Building works. Internal insulation and wall linings using gypsum composite panels. Part 1 : technical specifications.) |
| NF T60-248-2002 |
动植物脂肪和油.极性化合物含量测定 |
(Animal and vegetable fats and oils - Determination of content of polar compounds.) |
| NF F07-121-1-2001 |
铁路应用.电磁兼容性.第1部分:总则 |
(Railway applications - Electromagnetic compatibility - Part 1 : general.) |
| NF C30-202-2000 |
电缆命名系统 |
(System for cable designation.) |
| NF J31-301-2002 |
船舶和造船技术.防风雨的单扇钢门 |
(Ships and marine technology - Weathertight single-leaf steel doors.) |
| NF E62-314-1977 |
机床构造标准部件.多轴头.机床部件.零件定位销 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. PART CENTERING .) |
| NF X06-026-1987 |
统计学和质量.每单位不一致个体和不一致平均数的比率的计数检验.取样计划用一般方法 |
(APPLICATION OF STATISTICS. INSPECTION BY COUNTING OF THE PROPORTION OF NON CONFORMING ITEMS OR OF THE AVERAGE NUMBER OF NON CONFORMING ITEMS PER UNITS. GENERAL METHODS FOR THE CONSTRUCTION OF A SAMPLING PLAN.) |
| NF X31-556-1998 |
土壤质量.干松密度的测定 |
(Soil quality. Determination of dry bulk density.) |
| NF D32-321-1-1998 |
燃气家用烹饪器具.第1-1部分:安全性.一般的 |
(Domestic cooking appliances burning gas fuel. Part 1-1 : safety. General.) |
| NF C73-890-2003 |
家用和类似用途电器的安全.第2-90部分:商用微波炉的特殊要求 |
(Household and similar electrical appliances - Safety - Part 2-90 : particular requirements for commercial microwave ovens.) |
| NF T57-222-1996 |
塑料管道系统.玻璃纤维增强热固塑料管.初始纵向拉伸性能的测定 |
(Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of initial longitudinal tensile properties.) |
| NF X42-312-1998 |
生物技术.微生物制品的纯度、生物活性和稳定性的评定指南 |
(Biotechnology. Guidance on assessment of the purity, biological activity and stability of microorganism based products.) |
| NF P50-530-2-2003 |
热太阳能系统和元件.太阳能集热器.第2部分:试验方法 |
(Thermal solar systems and components - Solar collectors - Part 2 : test methods.) |
| NF Z82-267-1-1996 |
综合业务数字网(ISDN).7kHz电话和可视电话远程服务.数字用户信令系统No.1(DSS1)协议.第1部分:协议规范 |
(Integrated Services Digital Network (ISDN). Telephony 7 kHz and videotelephony teleservices. Digital subscriber signalling system no One (DSS1) protocol. Part 1 : protocol specification.) |
| NF T57-226-1996 |
塑料管道系统.玻璃增强热固性塑料元部件.栓结法兰联轴节的设计验证试验方法 |
(Plastics piping systems. Glas-reinforced thermosetting plastics (grp) components. Test methods to prove the design of bolted flange joints.) |
| NF J52-216-1997 |
造船.拖网绞车 |
(Shipbuilding. Trawl winches.) |
| NF T60-174-1994 |
临时腐蚀防护.腐蚀防护特性的评定.循环湿度室法 |
(Temporary protection against corrosion. Evaluation of corrosion protection properties. Cyclic humidity cabinet method.) |
| NF C42-725-2002 |
测量、控制和实验室用电气设备的安全要求.第031部分:电气测量和试验用手持式测试装置的安全要求 |
(Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031 : safety requirements for hand-held probe assemblies for electrical measurement and test.) |
| NF E64-602-1997 |
木工机械安全.人工加料平面刨床 |
(Safety of woodworking machines - Hand fed surface planing machines.) |
| NF C01-221-1989 |
电子技术词汇.第221章:材料和磁性原件? |
(Electrotechnical vocabulary. Chapter 221 : magnetic materials and components.) |
| NF P72-203-1/A1-2003 |
DTU 25.41.建筑工程.石膏纤维板施工.石膏墙板.第1部分:技术规范 |
(DTU 25.41 - Building works - Gypsum plasterboard works - Gypsum wallboards - Part 1 : technical specifications.) |
| NF E31-404-4/A2-2002 |
非家用多个气体燃烧器架空辐射管式加热器系统.第4部分:系统H.安全性 |
(Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4 : system H, safety.) |
| NF X11-517-1999 |
工业用金属丝织物.技术要求和试验 |
(Industrial woven wire cloth - Technical requirements and testing.) |
| NF T42-004-1987 |
天然橡胶胶乳.干胶含量的测定 |
(Rubber latex, natural. Determination of dry rubber content.) |
| NF Z83-519-1996 |
欧洲数字蜂窝状电信系统(第2阶段).费用通知(AoC)补充服务.第1阶段(GSM 02.86) |
(European digital cellular telecommunications system (phase 2). Advice of charge (AoC) supplementary service. Stage 1 (GSM 02.86).) |
| NF V45-064-2002 |
鱼类加工业.罐装鲭鱼规范 |
(Transformed fishes - Canned mackerels - Specifications.) |
| NF Z83-509-1996 |
欧洲蜂窝式数字通信系统(阶段2).用户识别模块(SIM).功能特征(GSM02.17) |
(European digital cellular telecommunications system (phase 2). Subscriber identity modules (SIM). Functional characteristics (GSM 02.17).) |
| NF S74-542/A1-2002 |
汽车赛手防护服.热和火焰防护.性能要求和试验方法.修改件 1:改进的弯曲试验 |
(Protective clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods - Amendment 1 : modified flexion test.) |
| NF Z85-167-1996 |
传输和多路转换(TM).2048 kbit/S界面的功能特性 |
(Transmission and multiplexing (TM). Functional characteristics of 2048 kbit/S interfaces.) |
| NF E51-727-2002 |
建筑物的通风.输气设备.设备及零部件的额定特性和性能 |
(Ventilation for buildings - Air handling units - Ratings and performance for units, components and sections.) |
| NF L31-219-1985 |
航空和航天系列.双排滚珠钢制耐腐蚀轴承尺寸系列:2 |
(Aerospace series. Bearings, airframe rolling, double row self-aligning ball bearings, in corrosion resisting steel, diameter serie 2, dimensions and loads.) |
| NF T54-932-1997 |
塑料管道系统.注模热塑配件配件、阀和附属设备.管道元件注模用热塑材料长期液压强度的测定 |
(Plastics piping systems. Injection-moulded thermoplastics fittings, valves and ancillary equipment. Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components.) |
| NF A50-640-2-2001 |
铝及铝合金.挤制合金EN AW-6060 and EN AW-6063精密型材.第2部分:尺寸和形状公差 |
(Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2 : tolerances on dimensions and form.) |
| NF A03-720-3-2002 |
混凝土的钢筋和预应力用钢.试验方法.第3部分:预应力钢 |
(Steel for the reinforcement and prestressing of concrete - Test methods - Part 3 : prestressing steels.) |
| NF A09-050-2001 |
无损检验.视觉试验.一般原理 |
(Non-destructive testing - Visual testing - General principles.) |
| NF A04-505-1988 |
铝、铜、镍及其合金制半成品.粒径的测定.镍和镍合金 |
(Semi-products made from aluminium, copper, nickel and their alloys. Determination of grain size. Nickel and nickel alloys.) |
| NF P21-312-1999 |
木结构.试验方法.用穿孔金属板紧固件进行组装 |
(Timber structures - Test methods - Joints made with punched metal plate fasteners.) |
| NF P21-374-1995 |
木结构.木框架墙的软体冲击试验 |
(Timber structures. Test methods. Soft body impact test of timber framed walls.) |
| NF C26-148-8-1998 |
电工用压敏胶粘带.第3部分:单项材料规范.第8节:带有压敏胶粘剂的玻璃纤维 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 8 : glass fabric with pressure-sensitive adhesive.) |
| NF C26-183-4-1995 |
电工用热固性树脂基工业刚性层压板规范.第3部分:各种材料规范.第4活页:酚醛树脂基刚性层压板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 4 : requirements for rigid laminated sheets based on phenolic resins.) |
| NF E75-100-2001 |
涂覆磨料.磨粒尺寸分析.第1部分:磨粒尺寸分布试验 |
(Coated abrasives - Grain size analysis - Part1 : grain size distribution test.) |
| NF C57-326-1996 |
光电器件.第6部分:基准太阳能模数的要求 |
(Photovoltaic devices. Part 6 : requirements for reference solar modules.) |
| NF C91-004-21-1998 |
NF C91-004-2-95的补充件1 |
() |
| NF C60-436/A2-2003 |
小型熔断器.第6部分:小型管状熔断体的熔丝座 |
(Miniature fuses - Part 6 : fuse-holders for miniature fuse-links.) |
| NF P78-341-2000 |
建筑玻璃.玻璃弯曲强度的测定.第1部分:试验玻璃原理 |
(Glass in building - Determination of the bending strength of glass - Part 1 : fundamentals of testing glass.) |
| NF Z44-040-1999 |
国家及其地区名用表示代码.第3部分:国家以前所用名的代码 |
(Codes for the representation of names of countries and their subdivisions. Part 3: code for formerly used names of countries.) |
| NF P34-309-2-2000 |
金属片屋顶产品.钢铝或不锈钢片的自支持产品规范.第2部分:铝 |
(Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2 : aluminium.) |
| NF T43-104-1994 |
生橡胶.挥发物质含量的测定 |
(Rubbers, raw. Determination of volatile-matter content.) |
| NF C93-643-145-2002 |
绝缘软套管.第3部分:各种型号套管的规范.表145-147:挤压聚四氟乙烯套管 |
(Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheets 145 to 147 : extruded PTFE sleeving.) |
| NF A49-875-1-1996 |
钢管的无损检测.第1部分:证明液压密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验 |
(Non destructive testing of steels tubes. Part 1 : automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness.) |
| NF X06-500-1996 |
利用标准材料作线性校准 |
(Linear calibration using reference materials.) |
| NF K20-006-1-1997 |
加密存储设备.耐火试验方法和分类.第1部分:数据卡 |
(Secure storage units. Classification and methods of test for resistance to fire. Part 1 : data cabinets.) |
| NF C20-403-4-2002 |
环境测试.第3-4部分: 支持文件和指南.湿热术语 |
(Environmental testing - Part 3-4 : supporting documentation and guidance - Damp heat tests.) |
| NF T54-041-1994 |
塑料管道系统.压力管道用弹性密封圈型接头的热注塑料配件.耐无轴向力短暂内压力性能的试验方法 |
(Plastics piping systems. Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping. Test method for resistance to a short-term internal pressure without end thrust.) |
| NF C64-452-1992 |
充气高压开关和控制设备用锻铝和铸铝合金焊接复合外壳 |
(Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear.) |
| NF E63-135-1992 |
压制工具.合成橡胶压力弹簧.第2部分:附件的规范 |
(Tools for pressing. Elastomer pressure springs. Part 2 : specification of accessories.) |
| NF C63-975-2-2-2002 |
电动车辆充电系统.第 22部分: 交流电动车辆充电站 |
(Electric vehicle conductive charging system - Part 22 : AC electric vehicle charging station.) |
| NF A89-520-1997 |
焊缝的无损检验.焊接接头的超声波检验? |
(Non destructive examination of welds. Ultrasonic examination of welded joints.) |
| NF S90-110-1996 |
便携式气瓶.医用指针指示马蹄型阀门排出口接头 |
(Transportable gas cylinders. Pin-index, yoke-type valve outlet connections for medical use.) |
| NF S30-107-1972 |
声学词汇.音乐声学 |
(Acoustics terminology. Music.) |
| NF X35-108-1992 |
机械的安全.危险声信号.一般要求、设计和试验 |
(Safety of machinery. Auditory danger signals. General requirements, design testing.) |
| NF V08-011-2003 |
食品和动物饲料的微生物学.微生物计数的水平法.30℃时的菌落计数技术 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of microorganisms - Colony-count technique at 30 o C.) |
| NF S97-032-2002 |
铜支承的宫内节育避孕器具.要求、试验 |
(Copper-bearing intra-uterine contraceptive devices - Requirements, tests.) |
| NF C20-070-2003 |
人-机接口、标记和识别用基本和安全原则.指示器和激励器的编码原则 |
(Basic and safety principles for man-machine interface, marking and indentification - Coding principles for indicators and actuators.) |
| NF Z89-381-1997 |
有听力障碍人用的电话.助听电话耳机的电感耦合 |
(Telephony for hearing impaired people. Inductive coupling of telephone earphones to hearing aids.) |
| NF V37-008-2000 |
烟草和烟草制品.空气调节和试验 |
(Tobacco and tobacco products - Atmosphere for conditioning and testing.) |
| NF L90-001-5-2002 |
太空项目管理.一般要求.第5部分:项目总体管理 |
(Space project management - General requirements - Part 5 : configuration management.) |
| NF S56-110-1998 |
旅游食宿车.旅居挂车.第1部分:住所的卫生和安全要求 |
(Leisure accommodation vehicles. Caravans. Part 1 : habitation requirements relating to health and safety.) |
| NF Z85-215-2-2002 |
固定无线电系统.点对多点天线.在频率范围:11 GHz ～ 60 GHz的固定无线电系统点对多点天线 |
(Fixed radio systems - Point to multipoint antennas - Antennas for point-to-multipoint fixed radio systems in the 11 GHz to 60 GHz band - Part 2 : 24 GHz to 30 GHz.) |
| NF H31-346-2000 |
钢制鼓形桶.标称容量是15-62升的可移动头式鼓形桶 |
(Steel drums - Removable head (open head) drums with a nominal capacity of 15 l to 62 l.) |
| NF A09-340-2-2001 |
无损检验.超声波检验.第2部分:敏感性和范围设定 |
(Non-destructive testing - Ultrasonic examination - Part 2 : sensitivity and range setting.) |
| NF T90-440-2-2001 |
水质.噬菌体的检测和计数.第2部分:体内大肠杆菌噬菌体的计数 |
(Water quality - Detection and enumeration of bacteriophages - Part 2 : enumeration of somatic coliphages.) |
| NF C01-441-1987 |
电工技术词汇.第441章:开关设备、控制设备和熔断器 |
(Electrotechnical vocabulary. Chapter 441 : switchgear, controlgear and fuses.) |
| NF P52-011-2/A1-2000 |
散热器和对流器.第2部分:试验方法和额定功率 |
(Radiators and convectors - Part 2 : test methods and rating.) |
| NF C26-175-1998 |
电气用途的非浸渍增加密度的层状木材.第1部分:定义,标识和一般要求 |
(Non-impregnated densified laminated wood for electrical purposes. Part 1 : definitions, designation and general requirements.) |
| NF Z15-101-2-2001 |
识别卡系统.内扇区电子钱包.第2部分:安全性的建立 |
(Identification card systems - Inter-sector electronic purse - Part 2 : security architecture.) |
| NF C42-326-1996 |
热电感器的连接件 |
(CONNECTORS FOR THERMOELECTRIC SENSORS. (EUROPEAN STANDARD EN 50 212).) |
| NF E58-005-1998 |
土方机械.挖沟机.定义和商业规范 |
(EARTH-MOVING MACHINERY. TRENCHERS. DEFINITIONS AND COMMERCIAL SPECIFICATIONS.) |
| NF Z82-359-1-1998 |
集成服务数字网络(ISDN).繁忙用户(CCBS)补充服务呼叫的结束.数字用户信息系统数字1(DSS1)协议:第1部分:协议 |
(Integrated Services Digital Network (ISDN). Completion of Calls to Busy Subscriber (CCBS) supplementary service. Digital Subscriber Signalling System no 1 (DSS1) protocol. Part 1 : protocol specification.) |
| NF T90-123-1997 |
水质.测定所选的植物处理剂.固体-液体萃取后用UV检测的高效液相色谱法 |
(Water quality. Determination of selected plant treatment agents. Method using high performance liquid chromatography with UV detection after solid-liquid extraction.) |
| NF P98-851-3-2003 |
敷路料规范.第3部分:粘合剂和石屑摊铺的速度和准确度 |
(Surface dressing - Specifications - Part 3 : rate of spread and accuracy of spread of binders and chippings.) |
| NF T34-555-5-1998 |
涂料和清漆.防护漆系统对钢结构的腐蚀防护.第5部分:防护漆系统 |
(Paints and varnishes. Corrosion protection of steel structure by protective paint systems. Part 5 : protective paint systems.) |
| NF L31-228-1985 |
航空和航天系列.机身用轴承.单排滚珠钢制耐腐蚀轴承.尺寸系列3和4.尺寸和负载.(EN 2020) |
(Aerospace series. Bearings, airframe rolling, single row self-aligning roller bearings, in steel, diameter series 3 and 4, dimensions and loads.) |
| NF T57-223-1996 |
塑料管道系统.玻璃增强热固性塑料(GRP)管.初期表面抗拉强度的测定 |
(Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination O the apparent initial circumferential tensile strength.) |
| NF T57-902-1997 |
玻璃纤维增强塑料(GRP)制地下油罐.系数α和β的测定 |
(Underground tanks of glass-reinforced plastics (GRP). Determination of factor alpha and factor beta.) |
| NF T54-054-1997 |
塑料管道系统.未增塑聚氯乙烯端点负载轴承双插座连接件.当弯曲和受到内压时测定其防漏性和强度的试验方法 |
(Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double socket joints. Test method for leaktightness and strength while subjected to bending and internal pressure.) |
| NF X05-050/A1-2001 |
图形符号.针对在时空定位和阅读学习中存在困难的所有人的服务和产品的识别.表示欢迎、援助和交通方便性的符 |
(Graphical symbols - Identification of services and products open to all persons with difficulties in spatio-temporal location and in reading learning - Welcoming, help assistant and accessibility symb) |
| NF Z83-511-1996 |
蜂窝式数字通信系统(阶段2).移动站(MS)的人机接口(MS)(GSM 02.30) |
(Digital cellular telecommunications system (phase 2). Man-machine interface (MMI) of the mobile station (MS) (GSM 02.30).) |
| NF D90-101-2003 |
打火机.安全规范 |
(Lighters - Safety specification.) |
| NF J95-025-1993 |
游艇.单机功率15KW-40KW弦外发动机的远距离操纵系统 |
(Small craft. Remote steering systems for single outboard motors of 15 kw to 40 kw power.) |
| NF X35-111/A1-1999 |
机械的安全.可触摸表面的温度.确定热表面温度极限值的人机工效学数据 |
(Safety of machinery. Temperatures of touchable surfaces. Ergonomics data to establish temperatur limit values for hot surfaces.) |
| NF Q64-012-1981 |
印刷工艺.印刷、印刷油墨和印刷受体.活版印刷用几种油墨比色法特性定义 |
(Graphic technology. Printing, printing inks and substrates. Definition of the colorimetric characteristics of a range of primary inks for letterpress printing.) |
| NF T57-224-1997 |
塑料管道系统.玻璃纤维增强热固性塑料(GRP)构件.检验带有弹性密封件的刚性锁定的管套筒接头设计的试验方法 |
(Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals.) |
| NF S77-107-1995 |
专用眼睛保护装置.一般和工业用滤波器? |
(Personal eye protection - Sunglare filters for industrial use.) |
| NF S56-111-1998 |
旅游食宿车.旅居车.第1部分:住所的卫生和安全要求 |
(Leisure accommodation vehicles. Motor caravans. Part 1 : habitation requirements relating to health and safety.) |
| NF E82-010-1999 |
闭模锻造的钢锻件.通用交货技术条件 |
(Steel closed die forgings - General technical delivery conditions.) |
| NF T72-233-2002 |
化学消毒剂.食品、工业、家庭和研究单位用化学消毒剂的杀孢子活性评定用定量悬浮试验.试验方法和要求(阶段2 |
(Chemical disinfectants - Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and r) |
| NF T42-019-1987 |
天然橡胶胶乳浓缩物.残渣含量的测定 |
(Natural rubber latex concentrate. Determination of sludge content.) |
| NF L15-125-2002 |
航空航天系列.铝合金板.厚度为6mm〈a≤160mm.尺寸 |
(Aerospace series - Plates in aluminium alloys - Thickness 6 mm inferior to a inferior or equal to 160 mm - Dimensions.) |
| NF A88-110-1-1992 |
焊工合格鉴定.熔焊.第1部分:钢件 |
(Approval testing of welders. Fusion welding. Part 1 : steels.) |
| NF X05-012-2001 |
图形符号.用于判断和理解的试验方法 |
(Graphical symbols - Test methods for judged comprehensibility and for comprehension.) |
| NF X50-011-2002 |
家用带气化油燃烧炉的维修合同.合同文献表达方法 |
(Service contract for domestic boilers with vaporizing oil burners - Presentation of contractual documents.) |
| NF Z82-144-1997 |
综合服务数字网络(ISDN).视听服务.频带内信号发送用A 64 kbit/s至1920 kbit/s通道及关联语法的帧结构 |
(Integrated Services Digital Network (ISDN). Audiovisual services. Frame structure for a 64 kbit/s to 1920 kbit/s channel and associated syntax for inband signalling.) |
| NF D63-003-1989 |
成卷墙纸.后装饰的墙面饰层规范 |
(Wallcoverings in roll form. Specification for wallcoverings for subsequent decoration.) |
| NF E32-115-5-2002 |
火管锅炉.第5部分:锅炉压力部件制造、文献工作和标志过程的检测 |
(Shell boilers - Part 5 : inspection during construction, documentation and marking of pressure parts of the boiler.) |
| NF T73-425-2003 |
表面活性剂.发泡能力和防沫能力.汽轮搅拌法 |
(Surface active agents - Foaming power and antifoaming power - Turbine stirring method.) |
| NF Z66-500-1987 |
信息系统.数据通信.高级数据链路控制规程.X.25LAPB 兼容性数据传输设备数据链路规程的描述 |
(Information systems. Data communication. High-level data link control procedures. Description of the X.25 lapb-compatible dte data link procedures.) |
| NF Z62-110-1967 |
信息处理.在穿孔纸带上７位编码字符组的表示法 |
(Information processing. Implementation on punched tape of the 7-bit coded character set.) |
| NF E29-260-1987 |
工业管道.涂PTFE-FEP-PFA碳氟化树脂的管道构件 |
(Industrial pipes. Pipe components with PTFE - FEP - PFA fluorocarbon resin.) |
| NF A37-201-1-1995 |
非合金钢冷成形板垛.第1部分:交货技术条件 |
(Cold formed sheet piling of non alloy steels. Part 1 : technical delivery conditions.) |
| NF E64-601-1/A1-2001 |
木材加工机械的安全.带有旋转工具的单边注模机器.第1部分:单心轴垂直注模机 |
(Safety of woodworking machines - One side moulding machines with rotating tool - Part 1 : single spindle vertical moulding machines.) |
| NF T20-405-1982 |
工业氯化钠.硫酸盐含量的测定.硫酸钡重量法 |
(Sodium chloride for industrial use. Determination of sulphate content. Barium sulphate gravimetric method.) |
| NF G35-003-1987 |
纺织地毯和物理试验用取样 |
(Machine-made textile floor coverings. Sampling and cutting specimens for physical tests.) |
| NF S92-025-2002 |
在实验室条件下诊断医疗装置的性能评估 |
(Performance evaluation of in vitro diagnostic medical devices.) |
| NF E63-003-1986 |
材料变形加工机械.鹅颈管底座机械压力机验收条件.精确度检验 |
(Material forming machines. Acceptance conditions of open front mechanical power presses. Accuracy testing.) |
| NF S91-158-1999 |
牙科植入物.与牙科植入物上部构造相连接的预制件.技术文件内容 |
(Dental implants. Prefabricated parts connecting suprastructures to dental implants. Contents of technical file.) |
| NF X35-118-1997 |
机械的安全.声和可视危险信号以及信息信号系统 |
(Safety of machinery. System of auditory and visual danger and information signals.) |
| NF C52-176-5-2002 |
电源变压器。第５部分：抗短路能力 |
(Power transformers - Part 5 : ability to withstand short circuit.) |
| NF T65-023-2000 |
原焦油和粗苯.术语 |
(Crude tar and crude benzole - Terminology.) |
| NF S31-257-2002 |
声学.工作室中声学性能评估用空间声音分布曲线的测量和参量描述 |
(Acoustics - Measurement and modelling of spatial sound distribution curves in workrooms for evaluation of their acoustical performance.) |
| NF H96-403-1996 |
叉式起重车.钩接式叉臂.词汇 |
(Fork-lift trucks. Hook-on type fork arms. Vocabulary.) |
| NF P12-801-2002 |
砖石工程和砖石工程产品.测定设计热值的方法 |
(Masonry and masonry products - Methods for determining design thermal values.) |
| NF E48-382-2002 |
液压传动.马达特性的测定.第2部分:起动性 |
(Hydraulic fluid power - Determination of characteristics of motors - Part 2 : startability.) |
| NF S91-242-2002 |
牙科学.活动义齿软衬材料.第2部分:长期使用的材料 |
(Dentistry - Soft lining materials for removable dentures - Part 2 : materials for long-term use.) |
| NF C93-537-3-11-2001 |
通信电缆.试验方法规范.第3-11部分:机械试验方法.电缆的耐切割性 |
(Communication cables - Specifications for test methods - Part 3-11 : mechanical test methods - Cable cut-through resistance.) |
| NF E90-323-1995 |
便携式手提电动工具.手柄振动的测量.第3部分:岩石钻头和旋转锤 |
(Hand-held portable power tools. Measurement of vibrations at the handle. Part 3 : rock drills and rotary hammers.) |
| NF T75-116-2000 |
香精油.苯酚含量的测定 |
(Essentials oils - Determination of content of phenols.) |
| NF C63-474-2002 |
低压开关装置和控制装置的组合件.电击保护.有危险带电部件的防无意直接接触保护器 |
(Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Protection against unintentional direct contact with hazardous live parts.) |
| NF C90-009-1997 |
自动频道安装(ACI) |
(Automatic channel installation (ACI).) |
| NF C26-136-1-1998 |
电气用途的波纹状压力板和压力纸板.定义,标记和一般要求 |
(Corrugated pressboard and presspaper for electrical purposes. Part 1 : definitions, designations and general requirements.) |
| NF C93-916-1-2002 |
纤维光学空间开关.第1部分:一般规范 |
(Fibre optic spatial switches - Part 1 : generic specification.) |
| NF B40-340-2002 |
密实成型耐火产品试验方法.第18部分:利用真空渗水法测定颗粒材料的体密度 |
(Methods of test for dense shaped refractory products - Part 18 : determination of bulk density of granular materials by the water method with vacuum.) |
| NF C01-394-1998 |
电工技术词汇.第394章.核测量仪:仪器 |
(Electrotechnical vocabulary. Chapter 394 : nuclear instrumentation : instruments.) |
| NF E60-120-1981 |
机床工件夹具的验收条件和安装条件 |
(Test conditions and installation conditions for work-holding fixed tables of machine tools.) |
| NF E29-175-2003 |
气体压力调节站和装置用安全设备.用于入口压力最高达100bar的气体安全关闭装置 |
(Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar.) |
| NF C20-030-2002 |
电击防护.装置和设备的通用概念 |
(Protection against electric shock - Common aspects for installation and equipment.) |
| NF A51-202-1998 |
铜和合金铜.煮水器,压力容器和热水贮存器用的盘状,片状,带状,和环状铜和铜合金 |
(Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units.) |
| NF Z84-392-11-14-2002 |
地面中继无线电系统(TETRA).声音加数据.第14部分:二级辅助服务.子部分17:滞后进入(LE) |
(Terrestrial trunked radio (TETRA) - Voice plus data (V+D) - Part 11 : supplementary services stage 2 - Sub-part 14 : late entry (LE).) |
| NF G62-105-2002 |
鞋靴.鞋帮、鞋衬和内垫试验方法.缝隙强度 |
(Footwear - Test methods for uppers, lining and insocks - Seam strength.) |
| NF J83-110-1997 |
内河航运船舶.舵手室和控制台.结构型号.安全技术要求 |
(Inland navigation vessels. Wheelhouse and control position. Types, safety requirements.) |
| NF Z83-558-1997 |
单元数字远程通信系统(2).3层移动式无线电接口,附加服务规范,概述 |
(Digital cellular telecommunications system (Phase 2). Mobile radio interface layer 3. Supplementary services specification. General aspects (GSM 04.10).) |
| NF M07-069-1995 |
石油产品.碳渣的测定.微米法 |
(Petroleum products. Determination of carbon residue. Micro method.) |
| NF S11-809-1999 |
眼科光学.接触镜片护理产品.镜架寿命测定指南 |
(Ophthalmic optics. Contact lens care products. Guidelines for determination of shelf-life.) |
| NF E04-057-1998 |
液压系统和元件.图形符号和电路图.第2部分:电路图 |
(Fluid power systems and components. Graphic symbols and circuits diagrams. Part 2 : circuit diagrams.) |
| NF C93-560-2-2002 |
射频连接器.第2部分:分规范.9.52型射频同轴连接器 |
(Radio-frequency connectors - Part 2 : sectional specification - Radio frequency coaxial connectors of type 9,52.) |
| NF T70-531-2003 |
国防用高能材料.安全性、易损性.水银管真空试验 |
(Energetic materials for defense - Safety, vulnerability - Vacum test with mercury tube.) |
| NF P82-201-1979 |
载客电梯和电控升降机.制造和安装的一般安全规则 |
(Electric or electrically controlled lifts and hoists. General safety rules for construction and installation.) |
| NF C73-212-2000 |
家用微波炉性能测试的六种方法 |
(Household microwave ovens 6 Methods for measuring performance.) |
| NF Z64-817-1993 |
信息技术.在每面80磁道上以31 831 ftprad使用调频录制的90mm软盘数据交换.ISO 303型 |
(Information technology. Data interchange on 90 mm flexible disk cartridges using modified frequency modulation recording at 31 831 ftprad on 80 tracks on each side. Iso type 303.) |
| NF C26-148-18-2003 |
电工用压敏胶粘带.第3部分:单项材料规范.活页18:涂压敏粘合剂的聚丙烯薄膜胶粘带 |
(Pressure-sensitive adhesive tapes for electrical purposes - Part 3 : specifications for individual materials - Sheet 18 : polypropylene film tapes with pressure-sensitive adhesive.) |
| NF P94-420-2000 |
岩石.同轴压缩强度的测定 |
(Rock - Determination of the uniaxial compressive strength.) |
| NF R13-629-1997 |
道路车辆用白炽灯.尺寸.电气和照明要求 |
(Filament lamps for road vehicles. Dimensional, electrical and luminous requirements.) |
| NF U66-063-2003 |
食品加工设备.转动盘剁肉机.安全及卫生要求 |
(Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements.) |
| NF S31-063-2003 |
声学.风机和其他风动设备辐射入管道中的声功率的测定.管道法 |
(Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method.) |
| NF V04-403-2001 |
肉、肉制品和渔业产品.游离脂肪含量的测定 |
(Meat, meat products and fishery products - Determination of free fat content.) |
| NF T50-062-2-2002 |
塑料.可比单点数据的采集和表示法.第2部分:长纤维增强塑料 |
(Plastics - Acquisition and presentation of comparable single-point data - Part 2 : long-fibre-reinforced plastics.) |
| NF S95-185-2003 |
呼气峰值流量计 |
(Peak expiratory flow meters.) |
| NF T01-060-3-1987 |
化学分析用试剂.规范.第3部分:一级标准.碳酸钠 |
(REAGENTS FOR CHEMICAL ANALYSIS. SPECIFICATIONS. PART 3 : PRIMARY STANDARD. SODIUM CARBONATE.) |
| NF H96-113-2-2002 |
固定的废弃物容器.第2部分:性能要求和试验方法 |
(Stationary waste containers - Part 2 : performance requirements and test methods.) |
| NF E73-073-1983 |
手用金属直锯架 |
(FRAMES FOR HAND SAWS FOR METAL.) |
| NF Z85-507-2-2002 |
通信.综合业务数字网(ISDN).信号系统No.7.运行部分,维护部分和管理部分(OMAP).第2部分:协议执行一致性声明 |
(Telecommunications - Integrated Services Digital Network (ISDN) - Signalling system No.7 - Operations, Maintenance and Administration part (OMAP) - Part 2 : Protocol Implementation Conformance Stateme) |
| NF P72-204-2-1993 |
DTC 25-42.建筑施工.私人合同.使用石膏复合衬板的内绝缘和墙衬.第2部分:特殊条款 |
(DTU 25-42. Building works. Private contracts. Internal insulation and wall linings using gypsum composite panels. Part 2 : special clauses.) |
| NF C01-111-1998 |
电工词汇.111章:物理和化学 |
(Electrotechnical vocabulary. Chapter 111 : physics and chemistry.) |
| NF C26-270-1975 |
绝缘材料的试验方法.新的和老化的电工用纸中等聚合粘度的测定 |
(Mesurement of the average viscosimetric degree of polymerization ofnew and aged electrical papers.) |
| NF E51-726-2002 |
建筑物的通风.终端.固定百叶窗经受模拟雨的性能试验 |
(Ventilation for buildings - Terminals - Performance testing of louvres subjected to simulated rain.) |
| NF T75-344-2002 |
香根草油 |
(Oil of vetiver (Vetiveria zizanioides (L.) Nash).) |
| NF C42-198-5-1997 |
1KV交流电和1.5KV直流电以下的低压配电系统中的电器安全性.试验,测量或保护监测测量用设备.第5部分:接地电 |
(Electrical safety in low voltage distribution systems up to 1 kV A.C. and 1,5 kV d.c. Equipment for testing, measuring or monitoring of protective measures. Part 5 : resistance to earth.) |
| NF E66-270-2001 |
高速切削机床用铣刀.安全要求 |
(Milling cutters for high speed machining - Safety requirements.) |
| NF C96-022-11-2002 |
半导体器件.机械和气候试验方法.第11部分: 温度的急速变化.双液电镀槽法 |
(Semiconductor devices - Mechanical and climatic test methods - Part 11 : rapid change of temperature - Two-fluid-bath method.) |
| NF B35-540-1998 |
实验室玻璃器皿.奶油测脂器 |
(Laboratory glassware. Butyrometer for cream.) |
| NF L22-733-1974 |
无销孔的实心ISO螺纹轴 |
(Solid pins, ISO thread, without split pin hole.) |
| NF A05-401-2002 |
金属和合金的腐蚀.核动力反应堆用的锆合金的水腐蚀试验 |
(Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors.) |
| NF K19-101-1997 |
银行业务.用不对称算法进行键控管理.第2部分:使用RSA密码系统的经认可的算法 |
(Banking. Key management by means of asymmetric algorithms. Part 2 : approved algorithms using the RSA cryptosystem.) |
| NF A89-540-1997 |
熔焊缝的无损检验.外观检查 |
(Non-destructive examination of fusion welds. Visual examination.) |
| NF E63-032-1993 |
机床.标称压力250kn以上包括4000kn的直边高速机械压力机.特性和尺寸 |
(Machine-tools. Straight sided high speed mechanical power presses from 250 kn up to and including 4 000 nominal force. Characteristics and dimensions.) |
| NF L31-205-1985 |
航天系列.机身用轴承.单排滚珠钢制钢性轴承尺寸系列8和9.尺寸与负载 |
(Aerospace series. Bearings, airframe rolling, rigid single row ball bearings, in steel, diameter series 8 and 9, dimensions and loads.) |
| NF H96-335-1-2001 |
工业货车安全.脚踏货车.第1部分:叉车 |
(Safety of industrial trucks - Pedestrian propelled trucks - Part 1 : stacker trucks.) |
| NF V08-002/A1-2001 |
食品和动物饲料微生物学.微生物检验的一般规则 |
(Microbiology of food and animal feeding stuffs - General rules for microbiological examinations.) |
| NF P62-306-2002 |
有弹性的地板覆盖物.背衬填充织物的聚氯乙烯地板覆盖物 |
(Resilient floor coverings - Polyvinyl chloride floor coverings on filled fibrous backing - Specification.) |
| NF A35-564-1-2002 |
冷镦和冷挤压的钢杆材、棒材和线材.第1部分:一般交货技术条件 |
(Steel rod, bars and wire for cold heading and cold extrusion - Part 1 : general technical delivery conditions.) |
| NF E54-001-2-2002 |
飞行器地面支持设备.一般要求.第2部分:稳定性和强度要求、计算和试验方法 |
(Aircraft ground support equipment - General requirements - Part 2 : stability and strength requirements, calculations and test methods.) |
| NF E75-077-1999 |
涂敷磨料.磨料辊筒. |
(Coated abrasive products - Abrasive rolls.) |
| NF C13-101-2003 |
变电站.由HV公共配电系统(33kV以下)供电的外壳保护的半穹窿顶的预制变电站 |
(Consumer substations - Semi-vault, prefabricated substations protected by enclosure, fed by a HV Public distribution system (up to 33 kV).) |
| NF Z15-003-1996 |
识别卡.录制方法.第2部分:磁条 |
(Identification cards. Recording technique. Part 2 : magnetic tape.) |
| NF E66-107-2000 |
公称直径由M3-M10的长杆螺丝攻.由回缩的全直径杆型螺丝攻 |
(Long shank taps with nominal diameters from M3 to M10 - Full-diameter shank taps with recess.) |
| NF D38-311/A1-1998 |
NF EN ISO 7371-1996的修改件 A1 |
() |
| NF S86-501-2002 |
计时装置.手表外壳.非弹簧棒型的固定尺寸 |
(Timekeeping instrument - Wristwatch-cases - Fixing dimensions of non-spring-bar types.) |
| NF C42-721/A1-1996 |
NF EN 61010-2-020-1994的修改1 |
() |
| NF T51-195-1-2000 |
塑料.暴露于实验室光源的方法.第1部分:通用指南 |
(Plastics - Methods of exposure to laboratory light sources - Part 1 : general guidance.) |
| NF C97-634-1998 |
助听器.第14部分:数字接口规范 |
(Hearing aids. Part 14 : specification of a digital interface.) |
| NF P31-203-2-1996 |
DTU 40-211.建筑工程.私人合同.粘土制的平板互锁砖屋顶.第2部分:特殊条款 |
(DTU 40-211. BUILDING WORKS. PRIVATE CONTRACTS. ROOF COVERING MADE OF CLAY FLAT INTERLOCKING TILES. PART 2 : SPECIAL CLAUSES.) |
| NF T67-115-1969 |
芳香烃.甲苯、二甲苯和石脑油溶剂腐蚀硫的测定.铜片试验 |
(AROMATIC HYDROCARBONS. DETERMINATION OF CORROSIVE SULPHUR IN TOLUENES,XYLENES AND SOLVENT NAPHTHAS. COPPER STRIP TEST.) |
| NF T60-227-1969 |
动物脂肪和植物脂肪.磷的比色法测定(钒钼酸盐法) |
(ANIMAL AND VEGETABLE FATS AND OIL. COLORIMETRIC DETERMINATION OF PHOSPHORUS (VANADOMOLYBDIC METHOD).) |
| NF T51-027-1965 |
塑料.氯乙烯一乙酸乙烯共聚物中醋酸乙烯的测定 |
(PLASTICS. DETERMINATION OF VINYL IN VINYL CHLORIDE ACETATE COPOLYMERS.) |
| NF L52-400-507-2003 |
航空航天系列.飞行器用光纤和光缆.试验方法.第507部分:切割强度 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 507 : cut-through.) |
| NF C18-404/A11-1997 |
NF EN 60984-1993的修改件1 |
() |
| NF C42-810-1-1993 |
不间断电源.第1部分:总则和安全要求 |
(Uninterruptibles power systems (ups). Part 1 : general and safety requirements.) |
| NF V04-040-2-1997 |
牛奶.体细胞的计数.第2部分:电子粒子计数法 |
(Milk. Enumeration of somatic cells. Part 2 : electronic particle counter method.) |
| NF P15-476-1990 |
水泥试验方法.细度的测定 |
(Methods of testing cement. Determination of fininess.) |
| NF C51-111/A11-2003 |
旋转电机.第1部分:额定值和性能 |
(Rotating electrical machines - Part 1 : rating and performance.) |
| NF S72-509-4-2000 |
防护头盔.试验方法.第4部分:保持系统效果 |
(Protective helmets - Test methods - Part 4 : retention system effectiveness.) |
| NF P16-700-1-2002 |
废水处理厂.第1部分:一般建造原则 |
(Wastewater treatment plants - Part 1 : general construction principles.) |
| NF S52-329-6-2001 |
固定训练设备.第6部分:脚踏车、附加特殊安全要求和试验方法 |
(Stationary training equipment - Part 6 : treadmills, additional specific safety requirements and test methods.) |
| NF D25-101-9-2003 |
与食品接触的材料和物品.塑料.第9部分:利用颗粒填充液态食品中塑料全淅出量的试验方法 |
(Materials and articles in contact with foodstuffs - Plastics - Part 9 : test methods for overall migration into aqueous food simulants by article filling.) |
| NF P78-109-2-1998 |
建筑物玻璃.特殊基本产品.第2部分:玻璃陶瓷 |
(Glass in building. Special basic products. Part 2 : glass ceramics.) |
| NF M07-030-1996 |
石油液体燃料.燃烧热的测定 |
(Petroleum liquid fuels. Determination of heat of combustion.) |
| NF T94-354-1997 |
生活用水处理用化学制品.磷酸氢氧一钾? |
(Chemicals used for treatment of water intended for human consumption. Monopotassium dihydrogen orthophosphate.) |
| NF E22-614-1986 |
械械传动.联节轴部件.选配联轴节所需的工业部件 |
(Mechanical transmissions. Coupling devices. Technical elements necessary for the selection of a coupler.) |
| NF S81-530-1996 |
钟表业.走动控制规范 |
(Horology. Specifications for movement blank control.) |
| NF S93-011-1993 |
注射管、注射针及其它医疗设备用的6％锥的锥形配件:第1部分:一般要求 |
(Conical fittings with a 6 per cent (luer) taper for syringes, needles and certain other medical equipment. Part 1 : general requirements.) |
| NF S72-505/A1-2002 |
工业用防撞帽 |
(Industrial bump caps.) |
| NF Z15-502-1996 |
识别卡系统.电信集成电路卡和终端.第2部分:安全结构 |
(Identification card systems. Telecommunications integrated circuit(s) cards and terminals. Part 2 : security framework.) |
| NF E86-504-1-2002 |
冷凝容器.静置真空绝缘压力容器.第1部分:基本原理要求 |
(Cryogenic vessels - Static vacuum insulated vessels - Part 1 : fundamental requirements.) |
| NF A05-671-2001 |
海底管道的阴极保护 |
(Cathodic protection for submarine pipelines.) |
| NF T57-404-2002 |
纤维增强塑料复合材料.无定向性增强材料的模型I层间断裂韧度G |
(Fibre-reinforced composites - Determination of mode I interlaminar fracture toughness, Gic, for unidirectionally reinforced materials.) |
| NF J95-029-1995 |
小型船舶.无防火燃料管 |
(Small craft. Non-fire-resistant fuel hoses.) |
| NF Z15-001-1996 |
识别卡.物理特性 |
(Identification cards. Physical characteristics.) |
| NF C68-302-1999 |
电气装置的米制电缆密封装置 |
(Metric cable glands for electrical installations.) |
| NF T70-525-2003 |
国防用高能材料.安全性、易损性.有限条件下的燃烧性能 |
(Defense energetic materials - Safety, vulnerability - Fire behaviour under confined conditions.) |
| NF H96-110-5/A1-2000 |
移动式废物容器.第5部分:性能要求和试验方法 |
(Mobile waste containers - Part 5 : performance requirements and test methods.) |
| NF L46-343-2002 |
航空航天系列.焊接管用钛合金三通垫环.28 000 kPa大气压 |
(Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28 000 kPa nominal pressure.) |
| NF T73-423-2002 |
表面活性剂.烷氧基化产品的水分子数测定 |
(Surface active agents - Determination of the water number of alkoxylated products.) |
| NF P25-307-1999 |
工业、商业和车库用门.术语.第1部分:门的类型 |
(Industrial, commercial and garage doors and gates - Terminology - Part 1 : types of doors.) |
| NF S76-021-2000 |
呼吸保护装置.气体过滤器和组合过滤器.要求、试验、标记 |
(Respiratory protective devices - Gas filters and combined filters - Requirements, testing, marking.) |
| NF Z68-110-1/A1-1995 |
NF EN 29506-1-1994的修改1 |
() |
| NF M87-227-2003 |
石油和天然气工业.一般炼油厂用燃烧加热器 |
(Petroleum and natural gas industries - Fire heaters for general refinery service.) |
| NF H95-320-1988 |
连续装卸机器.连续平衡计算器称重仪用带式输送机.特性 |
(CONTINUOUS MECHANICAL HANDLING EQUIPMENT. BELT CONVEYORS TO BE FITTED OUT WITH A CONTINUOUS WEIGHING DEVICE. CHARACTERISTICS.) |
| NF P21-203-1/A1-1998 |
DTU 31.1.修改件1 |
() |
| NF T90-324-1998 |
水质.消化污泥中有机化合物的“最大“厌氧生物降解性的评价.生物气体制品测量法 |
(Water quality. Evaluation of the “ultimate“ anaerobic biodegradability of organic compounds in digested sludge. Method by measurement of the biogas production.) |
| NF T72-202-1997 |
化学消毒剂和防腐剂.基本灭霉菌活性.试验方法和要求(阶段1) |
(Chemical disinfectants and antiseptics. Basic fungicidal activity. Test method and requirements (phase 1).) |
| NF S96-103-1999 |
电动轮椅、小型摩托车及其充电器.要求和试验方法 |
(Electrically powered wheelchairs, scooters, and their chargers. Requirements and test methods.) |
| NF H90-206-1999 |
交换部件.A级热交换部件.尺寸和一般要求 |
(Swap bodies. Thermal swap bodies of class A. Dimensions and general requirements.) |
| NF C20-403-2-1999 |
环境试验.第3部分:背景信息.第2节:结合温度和低气压的试验 |
(Environmental testing. Part 3 : background information. Section 2 : combined temperature/low air pressure tests.) |
| NF C31-686-2001 |
特种绕组线规范.第36部分:有粘结层的可焊接聚酰胺酯漆包圆铜绕组线.180级 |
(Specifications for particular types of winding wires - Part 36 : solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer.) |
| NF A36-205-1-2001 |
承压器件用扁钢制品.第1部分:一般要求 |
(Flat products made of steels for pressure purposes - Part 1 : general requirements.) |
| NF F01-034-1970 |
铁路车辆.属于一个铁路管理机构的集装箱和各种车辆（机车除外）的识别牌 |
(RAILWAY TRANSPORT EQUIPMENT. IDENTIFICATION PLATE FOR CONTAINERS AND ALL VEHICLES (OTHER THAN LOCOMOTIVES) BELONGING TO A RAILWAY ADMINISTRATION.) |
| NF T90-320-2-1999 |
水质.有关光发射水样品的抑制效果的测定(发光细菌试验).第2部分:使用液体干细菌法 |
(Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Part 2 : method using liquid-dried bacteria.) |
| NF E48-065-2-2000 |
一般用途和液压动力连接.带弹性体密封或金属对金属密封的ISO 261螺纹的孔和钝末端.第2部分:带弹性体密封的 |
(Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2 : stud ends with elastomeric sealing (type E).) |
| NF X50-131-2000 |
质量管理系统.要求 |
(Quality management systems - Requirements.) |
| NF C45-255-51-2003 |
机电式“有“或“无“继电器.第51部分:空白详细规范.经质量评定的机电式“有“或“无“电信继电器.非标准类 |
(Electromechanical all-or-nothing relays - Part 51 : blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Non-standardized types and construction.) |
| NF X42-119-2001 |
生物技术.管道和仪表的性能标准.第1部分:一般性能标准 |
(Biotechnology - Performance criteria for piping and instrumentation - Part 1 : general performance criteria.) |
| NF G07-148-1981 |
纺织.织物试验.活力测定撕裂强度.初始撕裂（强力摆锤） |
(Textiles. Tests for fabrics. Determination of tear strength under live froce. Initiated tear.) |
| NF T30-090-2002 |
涂料和清漆.内墙和天花板用水溶涂层材料和涂层系统.分类 |
(Paints and varnishes - Water-borne coating materials and coating systems for interior walls and ceilings - Classification.) |
| NF A35-564-3-2002 |
冷镦和冷挤压的钢杆材、棒材和线材.第3部分:表面硬化钢的交货技术条件 |
(Steel rod, bars and wire for cold heading and cold extrusion - Part 3 : technical delivery conditions for case hardening steels.) |
| NF S94-176-1-2002 |
外科植入物.膝关节假肢的总磨损.试验用有负荷控制和相应控制条件的磨损试验机的负荷和位移参数 |
(Implants for surgery - Wear of total knee-joint prostheses - Part 1 : loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for tes) |
| NF E22-372-1998 |
滚动轴承.滚针轴承.无内环滚针轴承筒.外型尺寸和公差 |
(Rolling bearings. Needle roller bearings, drawn cup without inner rings. Boundary dimensions and tolerances.) |
| NF L22-154-1975 |
120°半圆头开槽埋头螺钉.单际单位米制螺纹 |
(Slotted raised 120 degrees countersunk head screws. Sim thread (rech.).) |
| NF E04-505-6-2000 |
技术产品文献.字体.第6部分:西里尔字符 |
(Technical product documentation - Lettering - Part 6 : cyrillic alphabet.) |
| NF A89-570-2002 |
电阻点焊、缝焊和凸焊的剪切试验用样品尺寸和程序 |
(Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds.) |
| NF Z84-396-10-2002 |
地面中继无线电系统(TETRA).直接操作(DMO)技术要求.第10部分:控制的直接操作(M-DMO) |
(Terrestrial trunked radio (TETRA) - Technical requirements for direct operation (DMO) - Part 10 : managed direct operation (M-DMO).) |
| NF C97-312-1995 |
音响系统设备.第12部分:广播和类似用途连接器的应用 |
(Sound system equipment. Part 12 : application of connectors for broadcast and similar use.) |
| NF X20-527-2002 |
天然气.用做增味剂的有机硫化物.要求和试验方法 |
(Natural gas - Organic sulfur compounds used as odorants - Requirements and test methods.) |
| NF P26-320/A1-2003 |
建筑五金.门协调装置.要求和检验方法 |
(Building hardware - Door coordinator devices - Requirements and test methods.) |
| NF C93-913-1-2001 |
光学通信用光纤互连装置和无源元件的可靠性.第1部分:介绍指南和定义 |
(Reliability of fibre optic interconnecting devices and passive components for optical communications - Part 1 : introductory guide and definitions.) |
| NF E11-031-1994 |
钢制规.直径1mm-100mm的光滑环规(单头和双头塞规).一般型号和尺寸 |
(Gauges. 1 mm to 100 mm diameters plain plug gauges (single and double-ended). General shapes and dimensions.) |
| NF A49-502-2-1997 |
非合金和细晶粒结构钢的热成型结构空心截面.第2部分:公差、尺寸和截面特性 |
(Hot finished structural hollow sections of non-alloy and fine grain structural steels. Part 2 : tolerances, dimensions and sectional properties.) |
| NF L52-250-407-2002 |
航空航天系列.飞行器用电缆.试验方法.第407部分:易燃性 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Part 407 : flammability.) |
| NF C97-140-2001 |
高级激光视盘.光盘交换系统.规范 |
(Super video compact disc - Disc-interchange system - Specification.) |
| NF U15-460-1996 |
园艺机具.手提式电动树墙修剪机.安全性 |
(Garden equipment. Hand held, integrally powered hedge trimmers. Safety.) |
| NF Z41-101-1992 |
信息和文献.国际标准图书编号(IS6N) |
(Information and documentation. International standard book nubering (isbn).) |
| NF T73-280-2002 |
表面活性剂.烷基二甲基三甲铵乙内酯的自由胺含量的测定 |
(Surface active agents - Determination of free amine content of alkyl dimethyl betaines.) |
| NF C23-555-1992 |
可燃性气体的检测和测量电气仪表.测量空气中沼气含量不超过5%的I组电气仪表的性能要求 |
(Electical apparatus for the detection and measurement of combustible gases. Performance requirements for group I apparatus indicating up to 5 per cent (V/V) methane in air.) |
| NF E62-204-1996 |
组合机床通用部件.多轴端部.箱体和输入轴尺寸 |
(Modular units for machine tool construction. Multi-spindle heads. Casing and input drive shaft dimensions.) |
| NF T76-102-2002 |
胶粘剂.粘度测定 |
(Adhesives - Determination of viscosity.) |
| NF E62-540-1984 |
7/24自动换刀刀柄.40,45和50号刀柄 |
(Tool shank taper rate 7/24 for automatic tool changer. Shanks no 40, 45, 50.) |
| NF A82-104-2-2001 |
电阻点焊.外锥度1:10电极接头.第2部分:端推力电极用平行柄接头 |
(Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2 : parallel shank fixing for end-thrust electrodes.) |
| NF C42-161-1993 |
直流电流电阻电压比率盒 |
(Direct-current resistive volt ratio boxes.) |
| NF L54-002-014-2002 |
航空航天系列.电气和光学连接的元件.试验方法.第211部分:电容量 |
(Aerospace series - Elements of electrical and optical connection - Test methods - Part 211 : capacitance.) |
| NF C82-103-1-2002 |
设计自动化.第1部分:所有系统用的标准测试语言.所有系统用的通用缩略测试语言(C/ATLAS) |
(Design automation - Part 1 : standard test language for all systems - Common abbreviated test language for all systems (C/ATLAS).) |
| NF C27-601-1978 |
在电气设备上提取的六氟化硫的检验指南 |
(Specification and acceptance of new sulphur hexafluoride.) |
| NF P18-603-1-2002 |
轻集料.第1部分:混凝土、砂浆和灰浆用轻集料 |
(Lightweight aggregates - Part 1 : lightweight aggregates for concrete, mortar, and grout.) |
| NF C97-315-1993 |
音响系统设备.第15部分:音响系统元件互连的优选匹配值 |
(Sound system equipment. Part 15 : preferred matching values for the interconnection of sound systems components.) |
| NF C83-403-803-2003 |
详细规范:防松螺钉不可拆卸的厚度为0.8MM的带扁平触点的矩形连接器 |
(Detail Specification : rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable.) |
| NF F56-331-1978 |
铁路固定设备.通讯和信号装置架空线路用器材.平法兰 |
(FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD TELECOMMUNICATION AND SIGNALLING LINES. FLAT STEEL CLAMP.) |
| NF F01-082M-1970 |
铁路车辆.管路.软管接头(非金属) |
() |
| NF P02-025-1988 |
建筑和土木工程设计.线和网格模型尺寸的表示法 |
(BUILDING AND CIVIL ENGINEERING DRAWINGS. REPRESENTATION OF MODULAIR SIZES,LINES AND GRIDS.) |
| NF S60-303-1987 |
防火.计划和通告 |
(FIRE PROTECTION. PLANS AND INSTRUCTIONS POSTERS.) |
| NF P50-749-3-1999 |
建筑产品及元件的热性能.评估实验室测量热传递性能的特定标准.第3部分:热流量计测量法 |
(Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer properties. Part 3 : measurements by heat flow meter method.) |
| NF X10-023-1999 |
建筑物的热性能.建筑物表层热度不均匀性的定性检测.红外线法 |
(Thermal performance of buildings. Qualitative detection of thermal irregularities in building envelopes. Infrared method.) |
| NF F07-121-4-2001 |
铁路应用.电磁兼容性.第4部分:发信号和电信装置的发射和抗干扰性 |
(Railway applications - Electromagnetic compatibility - Part 4 : emission and immunity of the signaling and telecommunications apparatus.) |
| NF L43-635-2003 |
航空航天系列.耐热钢制焊接管接头.90度弯头.英制 |
(Aerospace series - Pipe coupling, welded, in heat resisting steel - Elbows 90 o - Inch series.) |
| NF T94-405-1998 |
饮用水处理用化学试剂.阴离子聚丙烯酰胺 |
(CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. CATIONIC POLYACRYLAMIDES. (EUROPEAN STANDARD EN 1410).) |
| NF T56-109-1995 |
软质泡沫聚合材料.抗撕裂强度的测定 |
(Flexible cellular polymeric materials. Determination of tear strength.) |
| NF L23-115-1975 |
渐减式厚平垫圈.老式(英寸) |
(Reduced and thick plain washers. Old type (rech.).) |
| NF A51-203-1998 |
铜和铜合金.弹簧和连接器用带材 |
(Copper and copper alloys - Strip for springs and connectors.) |
| NF Z83-542-1997 |
数字蜂窝通信系统(第2阶段).线路识别的增补服务.第2阶段(GSM 03.81) |
(Digital cellular telecommunications system (Phase 2). Line identification supplementary service. Stage 2 (GSM 03.81).) |
| NF E21-301-1985 |
工作母机台面.Ｔ形槽和配件.尺寸和公差 |
(Machine tool tables. T slots and accessories. Dimensions and tolerances.) |
| NF T70-330-2003 |
军用高能材料.物理-化学分析及特性.拉伸应力松弛 |
(Energetic materials for defense - Physical-chemical analysis and properties - Tensile stress relaxation.) |
| NF L12-006-2002 |
航空航天系列.热轧钢制圆形棒材.紧公差.直径D≥6mm至D≤ 250mm.尺寸 |
(Aerospace series - Round bars, hot rolled in steel - Close tolerances - Diameter D more than or equal to 6 mm and less than or equal to 250 mm - Dimensions.) |
| NF D35-345/A2-2002 |
气体点火的中央加热锅炉.标称热量输入不超过70KW的C型锅炉 |
(Gas-fired central heating boilers - Type C boilers of nominal heat input not exceeding 70 kW.) |
| NF E04-202-9-2003 |
工业加工用管道、管道元件和仪器.图形符号表示.第9部分:存储和搬运 |
(Pipelines, pipe components and apparatus for industrial processes - Symbolic representation - Part 9 : storage, handling.) |
| NF C91-004-3-2002 |
电磁兼容性(EMC).第4-3部分:试验和测量技术.辐射、射频和电磁场抗扰试验 |
(Electromagnetic compatibility (EMC) - Part 4-3 : testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test.) |
| NF L12-015-2002 |
航空航天系列.耐热合金加工的圆形棒材.直径D≥10mm 或者≤ 180mm.尺寸 |
(Aerospace series - Round bars, machined in heat resisting alloys - Diameter D more than or equal to 10 mm and less than or equal to 180 mm - Dimensions.) |
| NF S93-071-1997 |
一次性使用的无菌尿道导管 |
(Sterile urethral catheters for single use.) |
| NF C20-729-1994 |
基本环境试验方法.第2部分:试验.试验EB指南:震动 |
(Basic environmental testing procedures. Part 2 : tests. Test Eb and guidance : bump.) |
| NF P20-538-2003 |
窗.软重物体的冲击.试验方法、安全要求和分类 |
(Windows - Soft and heavy body impact - Test method, safety requirements and classification.) |
| NF C27-475-1975 |
液体介质的取样方法 |
(Method of sampling liquid dielectrics.) |
| NF L54-002-062-2002 |
航空航天系列.电气及光学连接元件.试验方法.第419部分:插件插头的稳定性 |
(Aerospace series - Elements of electrical and optical connection - Test methods - Part 419 : stability of male contacts in insert.) |
| NF S56-320-1998 |
休闲提供食宿车辆.安全通风要求 |
(Leisure accomodation vehicles. Safety ventilation requirements.) |
| NF C93-476-1-2000 |
电子设备的机械结构.室外外壳.第1部分:设计导则 |
(Mechanical structures for electronic equipment - Outdoor enclosures - Part 1 : design guidelines.) |
| NF L22-455-2000 |
航空用螺栓和螺母.槽顶(有槽)扁六角头螺母.ISO M或ISO MJ螺纹.４H公差级 |
(Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H tolerance class.) |
| NF P45-204-1-2001 |
DTU 61.1.家用燃气设施.第1部分:术语 |
(DTU 61.1 - Gas installation in domestic premises - Part 1 : terminology.) |
| NF X20-301-1978 |
用不分散红外线光束的吸收进行的分析法 |
(GAS ANALYSIS BY ABSORPTION OF A NON DISPERSIVE INFRA-RED RADIATION BEAM.) |
| NF F21-318-2002 |
铁路设施.集流系统.验证导电弓和架空接触线之间动态互作用的模拟 |
(Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line.) |
| NF L10-200-1995 |
航空和航天.最大厚度10千分尺的金属衬底表面用不带有粘结材料或填料的干式氟碳润滑剂.涂层配件的质量 |
(AEROSPACE SERIES. LUBRICATING DRY FLUOROCARBONATED WITHOUT BINDING MATERIAL OR FILLER, MAXIMUM THICKNESS OF 10 MICROMETER ON METALLIC SUBSTRATE. QUALITY OF COATED PARTS.) |
| NF C66-553-1978 |
架空线路用绝缘子和器材.室内用带陶瓷绝缘子的绝缘穿心瓷瓶.互换尺寸 |
(INSULATORS AND FITTINGS FOR OVERHEAD LINES. INDOOR BUSHINGS WITH CERAMIC INSULATORS. DIMENSIONS FOR INTERCHANGEABILITY.) |
| NF T90-348-1997 |
水的试验.洗石产品乳化效率的测定 |
(TESTING WATER. DETERMINATION OF EMULSIFYING POWER OF ROCK WASHING PRODUCTS.) |
| NF P93-501-3-2003 |
临时工作设备.第3部分:荷载试验 |
(Temporary works equipment - Part 3 : load testing.) |
| NF E48-620-1973 |
液压传动用流体.碳尘埃和难燃流体混合物中火焰蔓延性的测定 |
(FLUIDS FOR HYDRAULIC POWER SYSTEMS-DETERMINATION OF FLAME-PROPAGATION IN A MIXTURE OF FIRE-RESISTANT FLUIDS WITH COAL-DUST) |
| NF C93-561/A1-1981 |
NF C 93-561-1981的补充件1 |
() |
| NF S95-154-1998 |
医用气体管道系统.第2部分:麻醉气体清除处理系统.基本要求 |
(Medical gas pipeline systems - Part 2 : anaesthetic gas scavenging disposal systems - Basic requirements.) |
| NF Z85-165-2002 |
传输和多路传送(TM).同步数字体系(SDH).SDH租用线路.网络和终端接口表示 |
(Transmission and multiplexing (TM) - Synchronous digital hierarchy (SDH) - SDH leased lines - Network and terminal interface presentation.) |
| NF C93-840-1-44-2002 |
光学纤维.第1-44部分:测量方法和试验程序.截止波长 |
(Optical fibres - Part 1-44 : measurements methods and test procedures - Cut-off wavelength.) |
| NF F01-046-1970 |
铁路车辆.冷弯或热弯钢板弹簧.组弹簧片.公差 |
(RAILWAY TRANSPORT EQUIPMENT. HOT OR COLD FLANGED COACH SPRINGS. MOUNTED SPRINGS. TOLERANCES.) |
| NF T76-306-1998 |
胶粘剂.皮革和制鞋材料用胶粘剂.材料粘合程度的评估方法.最低要求和材料分类 |
(ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS. A METHOD FOR EVALUATING THE BONDABILITY OF MATERIALS. MINIMUM REQUIREMENTS AND MATERIAL CLASSIFICATION. (EUROPEAN STANDARD EN 1391).) |
| NF C61-441/A11-1998 |
NF EN 61009-2-1-1995的修改件11 |
() |
| NF Z83-569-1998 |
数字蜂窝通信系统(相2).限用户组补充服务.第3步(GMS 04.85) |
(Digital cellular telecommunications system (Phase 2). Closed User Group (CUG) supplementary services. Stage 3. (GSM 04.85).) |
| NF U05-002-1997 |
动物的射频识别.技术概念 |
(Radio-frequency identification of animals. Technical concept.) |
| NF L22-594-2000 |
航空用螺栓和螺母.锐角埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa( |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa) |
| NF T54-923-2000 |
塑料管道系统.与未增塑聚氯乙烯管一起使用的未增塑聚氯乙烯弹性密封环式套筒接头.负压下密封试验法 |
(Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure.) |
| NF M03-009-1990 |
固体矿物燃料.用氧弹燃烧对氯的总含量的测定.特殊氯离子电极法 |
(Solid mineral fuels. Determination of total chlorine content by oxygen bomb combustion. Method using a specific electrode for chloride ions.) |
| NF Z43-059-2003 |
技术制图.缩微复制的要求 |
(Technical drawings - Requirements for microcopying.) |
| NF X40-501-1975 |
防护.白蚁.法国建筑物对白蚁的防护 |
(Protection - Termites - Protection of buildings in france against termites.) |
| NF Z84-433-1995 |
无线电设备和系统(RES).双边带(DSB)和\或单边带(SSB)调幅民用无线电频带(CB)设备.技术特点和测量方法 |
(Radio equipment and systems (RES). Double side band (DSB) and/or single side band (SSB) amplitude modulated citizens band (CB) radio equipment. Technical characteristics and methods of measurement.) |
| NF T47-282-2002 |
石油类液体的抽吸和低压出料用塑料软管和软管组件规范 |
(Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquide - Specification.) |
| NF Z12-001-1973 |
组织机构系统图 |
(Structural schedule (of an organization).) |
| NF T54-300-4-2003 |
普通用水、排水、污水地下和地上压力系统用塑料管道系统.聚乙烯(PE).第4部分:阀门 |
(Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4 : valves.) |
| NF A09-590-2-2003 |
无损检验.磁粒子试验.第2部分:检测介质 |
(Non-destructive testing - Magnetic particle testing - Part 2 : detection media.) |
| NF S31-119-1-2002 |
声学.道路表面对交通噪声的影响的测量.第1部分:旁路统计法 |
(Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1 : statistical Pass-By method.) |
| NF E11-018-1996 |
产品几何量技术规范(GPS).长度测量仪表.螺纹测量用校准样品.带凹槽的塞规和环规 |
(Geometrical product specification (gps). Length measuring instruments. Calibraiton specimens for thread measurement. Plugs and rings with groove.) |
| NF E31-302-1976 |
流量小于或等于200kg/小时家用燃料油自动喷嘴 |
(Automatic sprayer burners for domestic fuel oil with a flow rate of up to 200 kg/H.) |
| NF C61-503/A28-2003 |
灯头、灯座及检验其互换性和安全性的量规.第3部分:量规 |
(Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3 : gauges.) |
| NF C32-013-1981 |
设备用绝缘电缆和导线.绝缘电缆的电缆心线 |
(Insulated cables and flexible cords. Conductors of insulated cables.) |
| NF C93-805-5-3-2002 |
光纤放大器.基础规范.第5-3部分:反射参数的试验方法.使用光电谱分析仪的反射公差试验法 |
(Optical fibre amplifiers - Basic specification - Part 5-3 : test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser.) |
| NF R13-421-2003 |
道路车辆.无屏蔽高压点火电缆.总规范、试验方法和要求 |
(Road vehicles - Unscreened high-voltage ignition cables - General specifications, test methods and requirements.) |
| NF T31-110-2000 |
涂料稀释剂.规范和试验方法.第15部分:琉态硅土 |
(Extenders for paints - Specifications and methods of test - Part 15 : vitreous silica.) |
| NF C04-200-1980 |
导体标记 |
(Marking of conductors.) |
| NF E27-615-1972 |
球面垫圈 |
(WASHER WITH SPHERICAL SEAT.) |
| NF L17-721-1993 |
航空航天系列.纺织玻璃纤维预浸渍.测定单位面积质量的试验方法 |
(AEROSPACE SERIES. TEXTILE GLASS FIBRE PREIMPREGNATES. TEST METHOD FOR THE DETERMINATION OF MASS PER UNIT AREA. (EUROPEAN STANDARD EN 2329).) |
| NF P20-532-2000 |
操作力量.试验方法.第2部分:门 |
(Operating forces - Test method - Part 2 : doors.) |
| NF F01-281-1989 |
铁路车辆.纤维加强热固塑料材料 |
(RAILWAY ROLLING STOCK. FIBRE REINFORCED THERMOSETING PLASTICS.) |
| NF C93-913-3-2001 |
光纤互连装置和无源元件的可靠性.第3部分:评价无源元件失败模块和方法的相应试验 |
(Reliability of fibre optic interconnecting devices and passive components - Part 3 : relevant tests for evaluating failure modes and failure mechanisms for passive components.) |
| NF S74-549-4-2002 |
专业摩托车驾驶者用防护服装.夹克、长裤、单件或套服.第4部分:冲击切割阻力测定的试验方法 |
(Protective clothing for professional motorcycles riders - Jackets, trousers and one-piece or divided suits - Part 4 : test method for determination of impact cut resistance.) |
| NF P21-381-1995 |
木结构.试验方法.测定强度和变形特性用桁架的试验 |
(Timber structures. Test methods. Test of trusses for the determination of strength and deformation behaviour.) |
| NF S51-214-1995 |
玩具安全.第3部分:某些零件的松动 |
(Safety of toys - Part 3 : migration of certain elements.) |
| NF P52-701-1-1996 |
加热系统控制.第1部分:热水加热系统室外温度压缩控制设备 |
(Controls for heating systems. Part 1 : outside temperature compensated control equipment for hot water heating systems.) |
| NF Z85-506-1-2002 |
模拟和综合业务数字网(ISDN)用户线路的电路试验用局域交换Q3接口.第1部分:Q3接头规范 |
(Q3 interface exchange at the Local Exchange (LE) for line and circuit testing of analogue and Integrated Services Digital Network (ISDN) suscriber lines - Part 1 : Q3 interface specification.) |
| NF T20-385-1977 |
工业氢氧化钾.钙含量的测定.ＥＤＴＡ综合分析法 |
(POTASSIUM HYDROXIDE FOR INDUSTRIAL USE. DETERMINATION OF CALCIUM CONTENT. EDTA (DISODIUM SALT) COMPLEXOMETRIC METHOD.) |
| NF C66-552-1978 |
架空线路用绝缘子和器材.室内、外用带陶瓷绝缘子的绝缘穿心瓷瓶.互换尺寸 |
(INSULATORS AND FITTINGS FOR OVERHEAD LINES. OUTDOOR-INDOOR BUCHINGS WITH CERAMIC INSULATORS. DIMENSIONS FOR INTERCHANGEABILITY.) |
| NF P92-521-2002 |
建筑产品耐火反应试验.燃烧热的测定 |
(Reaction to fire tests for building products - Determination of the heat of combustion.) |
| NF C31-003-2000 |
特种绕组线规范.第0部分:一般要求.第3节:漆包圆铝线 |
(Specification for particular types of winding wires - Part 0 : general requirements - Section 3 : enamelled round aluminium wire.) |
| NF V03-313-1991 |
生咖啡.感官分析用的试样制备 |
(Green coffee - Preparation of samples for use in sensory analysis.) |
| NF A89-601-2001 |
焊接.金属材料的摩擦焊接 |
(Welding - Friction welding of metallic materials.) |
| NF B57-047-2003 |
复合软木.膨胀连接填充料.试验方法 |
(Composition cork - Expansion joint fillers - Test methods.) |
| NF A89-521-1997 |
焊缝的无损检验.焊接接头的超声波检验.验收等级 |
(Non destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels.) |
| NF G38-191-2002 |
土工织物及相关产品.根据耐久性试验评定用的通用试验 |
(Geotextiles and geotextile-related products - General tests for evaluation following durability testing.) |
| NF E37-211-1-1997 |
往复式内燃机.废气排放测量.第1部分:气体和颗粒废气排放的试验床测定 |
(Reciprocating internal combustion engines. Exhaust emission measurement. Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.) |
| NF C32-102-1-2003 |
额定电压为450/750V(包括450/750V)以下的交联绝缘电缆.第1部分:一般要求 |
(Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 1 : general requirements.) |
| NF P16-361-5-1997 |
无压地下排水系统用塑料管道系统.不饱和聚酯树脂(UP)基础上的玻璃增强热固塑料(GRP).第5部分:接头的适用性 |
(Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 5 : fitness for purpose of the joints.) |
| NF C93-462-1981 |
电子设备元件.终端连接系统.可移动蠕变式模件.接头.一般要求 |
(Components for electronic equipment. Terminal junction system. Modules with removable crimp-type. Contacts. General requirements.) |
| NF X35-201-1994 |
热环境.在WBGT-INDEX基础上评估热应力对工作人员的影响(湿球球形温度计温度) |
(Hot environments. Estimation of the heat stress on working man, based on the wbgt-index (wet bulb globe temperature).) |
| NF D38-304-1981 |
家政学.家用冰箱.冷冻食品储藏室和冷藏室.特性.试验 |
(Home economie. Household refrigerators. Storage and frozen food storage cabinet. Characteristics. Tests.) |
| NF L15-315-2002 |
航空航天系列.铝及铝合金挤制圆棒材.直径10mm≤ D ≤ 220mm.尺寸 |
(Aerospaces series - Round bars, extruded in aluminium and aluminium alloys - Diameter 10 mm inferior or equal to D inferior or equal to 220 mm - Dimensions.) |
| NF E60-172-6-1998 |
组合加工中心机床的试验条件.第6部分:走刀量、速度和插入动作的准确度 |
(Test conditions for machining centres. Part 6 : accuracy of feeds, speeds and interpolations.) |
| NF C61-502-1993 |
灯头、灯座及检验其互换性和安全性的量规.第502部分:灯座 |
(Lamps caps and holders together with gauges for the control of interchangeability and safety - Part 2 : lampholders.) |
| NF P26-318-1997 |
建筑五金.门拉手或推板控制的应急出口装置.要求和试验方法 |
(Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods.) |
| NF Z86-487-1997 |
卫星地面站和系统(SES).1,5GHz频带中单路数据传输用移动接收地面站(ROMES).无线电功率规范 |
(Satellite Earth Stations and Systems (SES). Receive-Only Mobile Earth Stations (ROMESs) operating in the 1,5 GHz band providing data communications. Radio Frequency (RF) specifications.) |
| NF T57-153-3-2002 |
纤维增强塑料.试验板的生产方法.第3部分:湿压缩模塑法 |
(Fibre-reinforced plastics - Methods of producing test plates - Part 3 : wet compression moulding.) |
| NF A89-551-1998 |
焊缝的无损检验.焊缝的磁粉检验.验收等级 |
(Non-destructive examination of welds - Magnetic particle testing of welds - Acceptance levels.) |
| NF A48-810/A1-1999 |
燃气管道用球墨铸铁管、配件、附件及其接头.要求和试验方法 |
(Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods.) |
| NF S97-317/A1-2002 |
支承医疗设备的支架系统 |
(Rail systems for supporting medical equipment.) |
| NF C20-010-1992 |
外壳防护等级(1P代码) |
(Degrees of protection provided by enclosures (IP Code).) |
| NF T20-037-1985 |
化工产品.挥气性液体和气体自燃温度的测定 |
(Chemical products of industrial use. Determination of temperature of auto-inflammation of volatil liquids and gases.) |
| NF T75-354-1999 |
西班牙牛至油 |
(Oil of origanum, Spanish type [Thymbra capitata (L.) Cav.].) |
| NF U44-310-2-2002 |
土壤改良剂和生长媒介.测定氮.Dumas法 |
(Soil improvers and growing media - Determination of nitrogen - Part 2 : Dumas method.) |
| NF E37-005-1987 |
往复式内燃机.发动机部件的术语和定义.第4部分：压缩机，进气和排气循环 |
(RECIPROCATING INTERNAL COMBUSTION ENGINES. TERMS AND DEFINITIONS OF ENGINE COMPONENTS. PART 4 : PRESSURE CHARGING AND AIR EXHAUST GAS DUCTING SYSTEMS.) |
| NF T76-106-1981 |
粘合剂.热熔性粘合剂熔点的常规测定.(“球环法“) |
(ADHESIVES. DETERMINATION OF THE CONVENTIONAL MELTING POINT OF ADHESIVES HOT-MELT. (“BALL AND RING“ METHOD).) |
| NF P94-157-2-1996 |
土壤:调查和试验.现场孔隙压力测量.第2部分:孔隙压力计 |
(SOILS : INVESTIGATION AND TESTING. IN SITU PORE PRESSURE MEASUREMENT. PART 2 : PORE PRESSURE METER.) |
| NF P25-319-2003 |
工业、商业和车库用门.电动门的安全装置.要求和试验方法 |
(Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods.) |
| NF R22-732-1987 |
机动脚踏车轮胎和轮辋(毫米制系列).第1部分:型号.全系列轮胎 |
(MOTORCYCLE TYRES AND RIMS (METRIC SERIES). PART 1 : TYRES. ALL SERIES.) |
| NF P61-602-1998 |
瓷砖粘结剂.试验用混凝土板 |
(Adhesives for tiles. Concrete slab for test.) |
| NF E48-701-1993 |
液压传动.滤油器.定义、标定压力、标定尺寸、配件尺寸 |
(Hydraulic fluid power. Filters. Definitions, nominal pressures, nominal sizes, fitting dimensions.) |
| NF P98-105-2003 |
路面基层.混合料的连续生产.用粘结剂粘结的粒状材料和砂石的生产控制或连续混合设备中未处理的粒状材料和砂 |
(Pavement bases - Continous manufacture of mixtures - Production control of granular materials and sands bound with cementitions binders or of untreated granular materials and sands in a continuous mix) |
| NF T20-382-1977 |
工业氢氧化钾.硫酸盐含量的测定.硫酸钡的重量法 |
(POTASSIUM HYDROXIDE FOR INDUSTRIAL USE. DETERMINATION OF SULPHATE CONTENT. BARYUM SULPHATE GRAVIMETRIC METHOD.) |
| NF B40-678-2-1997 |
耐火材料产品.耐火砖的尺寸测量和外部缺陷.第2部分:角、边缺陷和其它表面不完全性 |
(REFRACTORY PRODUCTS. MEASUREMENT OF DIMENSIONS AND EXTERNAL DEFECTS OF REFRACTORY BRICKS. PART 2 : CORNER AND EDGE DEFECTS AND OTHER SURFACE IMPERFECTIONS.) |
| NF A49-875-3-2000 |
钢管的无损检验.第3部分:检测缺陷用无缝和焊接钢管(埋弧焊除外)的自动涡流试验 |
(Non-destructive testing of steel tubes - Part 3 : automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections.) |
| NF L23-166-2000 |
航空和航天.钢制镀镉的大直径平垫圈 |
(Aerospace series - Washers, flat, large diameter, in steel, cadmiumplated.) |
| NF C63-421-2000 |
低压开关设备和控制设备组件.第1部分:型式试验和部分型式组件 |
(Low-voltage switchgear and controlgear assemblies - Part 1 : type-tested and partially type-tested assemblies.) |
| NF E58-102-1996 |
土方机械.安全性.第4部分:挖掘装载机的要求 |
(Earth-moving machinery. Safety. Part 4 : requirements for backhoe loaders.) |
| NF V76-125-1994 |
水果和蔬菜汁.L-苹果酸含量的酶催化的测定.NADH光谱法 |
(Fruit and vegetable juices. Enzymatic determination of L-matic acid (L-malate) content. Nadh spectrometric method.) |
| NF S54-200-1994 |
人工圣诞树.金属端的保护 |
(Artificial christmas trees. Protection of the metallic ends.) |
| NF C58-272-3-2003 |
二次蓄电池和电池设备的安全要求.第3部分:牵引用蓄电池 |
(Safety requirements for secondary batteries and battery installations - Part 3 : traction batteries.) |
| NF L22-140-1984 |
六角头全螺纹螺钉 |
(Bolt, hexagonal head, threaded to head.) |
| NF C13-100-2001 |
由HV公共配电系统供电的建筑物内部的变电站 |
(Consumer substations installed inside a building and fed by HV Public distribution system (up to 33 kV).) |
| NF E22-141-1955 |
圆柱渐开线花键 |
(Cylindrical involute splines.) |
| NF T57-214-5-1996 |
压力下地下排水系统用塑料管道系统.不饱和聚酯树脂基玻璃增强热固塑料.第5部分:接头的适用性 |
(Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (grp) based on unsatured polyester resin (up). Part 5: fitness for purpose of the joints.) |
| NF E63-031-1993 |
机床.标称压力400kn以上包括4000kn的直边单动机械压力机.特性和尺寸 |
(Machine-tools. Straight-sided single action mechanical power presses from 400 kn up to and including 4 000 kn nominal force. Characteristics and dimensions.) |
| NF C90-005-1993 |
MAC/包族存取控制系统.Eurocrypt |
(Acces control system for the mac/packet family : eurocrypt.) |
| NF Z15-036-1997 |
识别卡.有触点的集成电路卡.第6部分:工业内部数据元素 |
(Identification cards. Integrated circuit(s) cards with contacts. Part 6 : interindustry data elements.) |
| NF T51-426-1995 |
塑料.液态酚醛树脂或酚醛树脂溶液粘度的测定 |
(Plastics. Phenolic resins in the liquid state of in solution. Determination of viscosity.) |
| NF C48-342-1999 |
警报系统.社会警报系统.第2部分:触发装置 |
(Alarm systems. Social alarm systems. Part 2 : trigger devices.) |
| NF C27-253-1994 |
矿物绝缘油.2-糖醛及相关化合物的测定方法 |
(Mineral insulating oils. Methods for the determination of 2-furfural and related compounds.) |
| NF C73-176/A2-2002 |
家用电动洗碗机.性能测量的试验方法 |
(Electric dishwashers for household use - Test methods for measuring the performance.) |
| NF A49-502-1-1994 |
非合金和细精粒结构钢的热成型结构空心型材.第1部分:交货技术要求 |
(Hot finished structural hollow sections of non-alloy and fine grain structural steels. Part 1 : technical delivery requirements.) |
| NF U25-514-1992 |
声学.在操作者耳朵范围内听到的割灌机发出的噪音测定 |
(Acoustics. Measurement at the operator`s position of airborne noise emitted by brush saws.) |
| NF C96-022-18-2003 |
半导体器件.机械和气候试验方法.第18部分:电离辐射(总剂量) |
(Semiconductor devices - Mechanical and climatic test methods - Part 18 : ionizing radiation (total dose).) |
| NF C54-121-1988 |
感应电热装置用电容器超压内保险装置和内断路器 |
(Internal fuses and internal overpressure disconnectors for capacitors for inductive heat generating plants.) |
| NF C01-448-1998 |
电工词汇.448章.动力系统保护 |
(Electrotechnical vocabulary. Chapter 448 : power system protection.) |
| NF P43-010-2003 |
防饮用水回流污染的设备.带减压区的可控制回流防止器.B系列A型 |
(Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A.) |
| NF C93-430-5-1998 |
用于印制板的频率低于3MHZ的连接件.第5部分:2,54MM(0.1IN)空间的双边印制板用两部连接件和边缘套节连接件 |
(Connectors for frequencies below 3 MHz for use with printed boards. Part 5 : edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing.) |
| NF C97-170-5-1995 |
数字盒式磁带录音系统.第5部分:专业用数字录音机 |
(Digital audio tape cassette system (dat). Part 5 : dat for professional use.) |
| NF P94-322-1999 |
专业土工工程的执行.薄板桩墙 |
(Execution of special geotechnical work. Sheet-pile walls.) |
| NF Z85-785-1999 |
传输和多路传送技术(TM).同步数字层次(SDH).M-x sub-STM-1传输用无线电特殊功能逻辑块 |
(Transmission and Multiplexing (TM) - Synchronous Digital Hierarchy (SDH) - Radio specific functional blocks for transmission of M x sub-STM-1.) |
| NF E27-170-1974 |
通用滚花头螺钉 |
(GENERAL PURPOSE KNURLED THUMBS SCREWS.) |
| NF F76-020-1971 |
铁路固定设备.曲柄钻 |
(FIXED RAILWAY INSTALLATIONS. TRACK SERVICE AND MAINTENANCE TOOLS. ADZING BRACES.) |
| NF E58-003-2-2003 |
土方机械.尺寸和符号的定义.第2部分:设备和附件 |
(Earth-moving machinery - Definitions of dimensions and codes - Part 2 : equipment and attachments.) |
| NF S10-132-1-2002 |
微型透镜阵列.第1部分:词汇 |
(Microlens array - Part 1 : vocabulary.) |
| NF A06-392-2-2003 |
黑色金属的化学分析.钢铁中的氧含量测定.第2部分:在惰性气体中融化后的红外法 |
(Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2 : infrared method after fusion under inert gas.) |
| NF T20-498-1979 |
工业浓磷酸（包括食品工业）.氯化物含量的测定.电位滴定法 |
(Condensed phosphates for industrial use (including foodstuffs). Determination of chloride content. Potentiometric method.) |
| NF C97-620/A1-1996 |
NF EN 60118-0-1993的修改1 |
() |
| NF X42-144-2001 |
生物技术.容器的性能标准.第1部分:一般性能标准 |
(Biotechnology - Performance criteria for vessels - Part 1 : general performance criteria.) |
| NF M06-004-2000 |
石油工业.术语.第3部分:开采和生产 |
(Petroleum industry - Terminology - Part 3 : exploration and production.) |
| NF C54-103-4-1996 |
大约1000V电压的交流电力系统用分路电容器.第4部分:内部熔断器 |
(Shunt capacitors for A.C. power systems having a rated voltage above 1 kV. Part 4 : internal fuses.) |
| NF T51-013-1969 |
塑料液状聚氯乙烯树脂粘性指数的常规测定 |
(PLASTICS. CONVENTIONAL DETERMINATION OF VISCOSITY NUMBER OF PVC RESINS IN SOLUTION.) |
| NF H34-092-2001 |
塑料包装.塑料冷冻袋.规范和试验方法 |
(Packaging-Plastics - Plastics freezer bags - Specifications and testing methods.) |
| NF A09-120-2-2000 |
无损试验.渗透试验.第2部分:渗透材料试验 |
(Non-destructive testing - Penetrant testing - Part 2 : testing of penetrant materials.) |
| NF T73-201-2001 |
表面活性剂.水含量的测定.卡尔.费歇尔法 |
(Surface active agents - Determination of water content - Karl Fischer method.) |
| NF U22-216-1990 |
耕地机具.旋转式中耕机.工作零件,互换性 |
(Equipment for working the soil. Rotary cultivator blades. Fixing dimensions.) |
| NF T54-029-1981 |
塑料.未增塑聚氯乙烯模制接头.压力系列.规范 |
(Plastics. Moulded unplasticized PVC fittings. Pressure series. Specifications.) |
| NF A04-193-1997 |
铸造.磁微粒检验 |
(Founding - Magnetic particle inspection.) |
| NF T57-217-1996 |
塑料管道系统.玻璃纤维增强热固性塑料管.潮湿条件下蠕变因子的测定和长期指定环的硬度的计算 |
(Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness.) |
| NF E25-754-1992 |
有头U形销 |
(Clevis pins with head.) |
| NF Z15-153-1999 |
识别卡系统.人机接口.第3部分:键护垫 |
(Identification card systems - Man-machine interface - Part 3 : key pads.) |
| NF J95-021-1995 |
小型航空器.电扇 |
(Small craft - Electric fans.) |
| NF L90-001-7-2002 |
太空项目管理.一般要求.第7部分:资金和进度管理 |
(Space project management - General requirements - Part 7 : cost and schedule management.) |
| NF E38-328/A1-2003 |
热交换器.液体冷却制冷剂凝结器.性能确定的试验程序 |
(Heat exchangers - Liquid cooled refrigerant condensors - Test procedures for establishing the performance.) |
| NF C63-001/A2-2002 |
低压开关设备和控制设备.第1部分:总则 |
(Low-voltage switchgear and controlgear - Part 1 : general rules.) |
| NF E29-171-1999 |
入口压力最大达100bar的气压调节器 |
(Gas pressure regulators for inlet pressures up to 100 bar.) |
| NF C68-120/A1-2002 |
电气装置的电缆干管和管道系统.第1部分:一般要求 |
(Cable trunking systems and cable ducting systems for electrical installations - Part 1 : general requirements.) |
| NF M07-026-2-1994 |
发动机燃料.抗膨胀特性的测定.研究方法 |
(Motor fuels. Determination of knock characteristics. Research method.) |
| NF E29-043-1990 |
工业管道工程.管道、锅炉和压力容器法兰组件用非合金钢或合金钢制螺栓 |
(Industrial pipework. Non alloy and alloy. Steel bolting for flanged assemblies of pipeworks, boilers and pressure vessels. Specifications.) |
| NF L52-250-409-2002 |
航空航天系列.飞行器用电缆.试验方法.第409部分:真空老化试验 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Part 409 : air-excluded ageing.) |
| NF G07-088-1986 |
纺织品.色牢度试验.标准织物的规范:三醋酸纤维 |
(Textiles. Tests for colour fastness. Specification for standard adjacent fabric : triacetate.) |
| NF A47-251-1987 |
钢丝绳.三股钢缆.拉丝材.标准材.型材和冷轧材.套管式绳端头 |
(Steel wire ropes - Ferrule secured eye terminations.) |
| NF L22-453-2000 |
航空用螺栓和螺母.槽顶(有槽)扁六角头螺母.ISO M或ISO MJ螺纹.按直径４H５H或５H进行公差分类 |
(Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF C46-001-1993 |
工业过程测量与控制设备.运行条件.第1部分:气候条件 |
(Industrial-process measurement and control equipment. Operating conditions. Part 1 : climatic conditions.) |
| NF L17-015-2000 |
航空系列.非金属材料.质量计划的验收和评价及建立的规则 |
(Aerospace series - Non-metallic materials - Rules for the establishement, the evolutions and the acceptance of quality plans.) |
| NF C45-211-1985 |
继电器.用指定时间测量单向输入能量用的继电器 |
(Electrical relays. Single input energizing quantity measuring relays with dependent specified time.) |
| NF C26-163-5-1993 |
电气绝缘用无溶剂可聚合树脂化合物规范.第3部分:单项材料规范.第5活页:不饱和聚酯填充性树脂 |
(Specification for solventless polymerisable resinous compouds used for electrical insulation. Part 3 : specifications for individual materials. Sheet 5 : unsaturated polyester impregnating resins.) |
| NF C01-551-1999 |
电工词汇.第551章:电力电子学 |
(Electrotechnical vocabulary. Chapter 551 : power electronics.) |
| NF C73-662-1997 |
家用和类似用途非电气器具的电气设备.安全要求 |
(Electrical equipment of non-electric appliances for household and similar purposes. Safety requirements.) |
| NF C27-234-1990 |
电工技术用流体.利用密封柱气相色谱法测量绝缘矿物油中的聚氯联二苯 |
(Determination of polychlorinated biphenyle (pcbs) in mineral insulating oils by packed column gas chromatography (gc).) |
| NF T94-152-1998 |
人类用水的处理试剂.硫化铁(二价)(欧洲标准EN 889) |
(Chemicals used for treatment of water intended for human consumption. Iron (III) sulfate.) |
| NF D35-324/A2-2000 |
供应家用热水的燃气水蓄热水器 |
(Gas fired storage water heaters for the production of domestic hot water.) |
| NF P19-829-4-1998 |
预制混凝土产品.玻璃增强混凝土的试验方法.简化弯曲实验法对弯曲强度的测定 |
(Precast concrete products. Test method for glass-fibre reinforced cement. Part 4 : measuring bending strength, “Simplified bending test“ method.) |
| NF C27-218-1988 |
电子技术用液体.绝缘液体在雷击时被击穿强度的测定方法 |
(Fluids for electrotechnical applications. Methods for the determination of the lighting impulse breakdown-voltage of insulating liquids.) |
| NF T37-001-8-2002 |
卷材覆层金属.试验方法.第8部分:耐盐雾试验 |
(Coil coated metals - Test methods - Part 8 : resistance to salt spray (fog).) |
| NF C61-151-1995 |
家用和类似用途的无整体过电流保护装置的剩余电流驱动式断路器(RCCB).第2部分第1节:一般规则对与线电压无关 |
(Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (rccb`S). Part 2-1 : applicability of the general rules to rccb`S functionally independent of line.) |
| NF C31-673/A1-2002 |
特种绕组线规范.第23部分:180类可焊接聚氨亚胺漆包圆铜线 |
(Specifications for particular types of winding wires - Part 23 : solderable polyesterimide enamelled round copper wire, class 180.) |
| NF C46-951-1993 |
遥控设备及装置.第5部分:传输协议.第1单元:传输构造格式 |
(Telecontrol equipment and systems. Part 5 : transmission protocols. Section one : transmission frame formats.) |
| NF C27-252-1995 |
绝缘油.火焰线性传播.使用玻璃纤维的试验方法 |
(Insulating liquids. Linear flame propagation. Test method using a glass-fibre tape.) |
| NF C46-410-1993 |
工业处理控制系统用电动和气动模拟图表记录仪性能评定方法 |
(Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems.) |
| NF C01-371-1985 |
电工技术词汇.第371章.遥控 |
(Electrotechnical vocabulary. Chapter 371 : telecontrol.) |
| NF C93-430-3-1998 |
用于印制板的频率低于3MHZ的连接件.具有在2,54MM(0,1IN)中心接触空间和同样空间的交错终端的印制板两部连接 |
(Connectors for frequencies below 3 MHz for use with printed boards. Part 3 : two-part connectors for printed boards, having contacts spaced at 2,54 mm (0,1 in) centres and staggered terminations at that same spacing.) |
| NF T60-111-1999 |
石油基润滑油.老化特性.用康拉孙(法)测定氧化后残碳的变化 |
(Petroleum-based lubricating oils - Ageing characteristics - Determination of change in Conradson carbon residue after oxidation.) |
| NF A89-550-1998 |
焊缝的无损检验.焊缝的磁粉检验 |
(Non-destructive examination of welds - Magnetic particle examination of welds.) |
| NF H31-344-2000 |
钢制鼓形桶.标称容量为20-60升的非移动头式鼓形桶 |
(Steel drums - Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l.) |
| NF D36-391-1/A1-2003 |
燃气燃烧器和燃气装置用燃气/空气比率控制器.第1部分:气动结构类型 |
(Gas/air ratio controls for gas burners and gas burning appliances - Part 1 : pneumatic types.) |
| NF M60-805-2-2003 |
核能.环境中放射性的测量.水.第2部分:感应耦合等离子体原子发射光谱法测量水中铀的浓度 |
(Nuclear energy - Measurement of radioactivity in the environment - Water - Part 2 : measurement of the concentration of uranium in water by inductively coupled plasma atomic emission spectroscopy.) |
| NF T60-193-1993 |
含水加工流体.PH值的测定 |
(Aqueous machining fluids. Determination of the pH value.) |
| NF E48-651-2002 |
液压传动.液压液污染.用光学显微镜计数法测定粒状污染物 |
(Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope.) |
| NF A89-057-11-2002 |
金属材料焊接程序规范和鉴定.焊接程序试验.第11部分:电子和激光射线焊接 |
(Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11 : electron and laser beam welding.) |
| NF C47-744/A1-2001 |
家用及类似用途自动电控制装置.第2部分:电调节器的特殊要求 |
(Automatic electrical controls for household and similar use - Part 2-14 : particular requirements for electric actuators.) |
| NF E58-112-1996 |
土方机械.操作者控制装置 |
(Earth-moving machinery. Operator`S controls.) |
| NF C61-743-4-2002 |
低压电涌保护装置元件.第341部分:闸流晶体管电涌抑制器(TSS)规范 |
(Components for low-voltage surge protective devices - Part 341 : specification for thyristor surge suppressors (TSS).) |
| NF T94-353-1997 |
生活用水处理用化学制品.磷酸三钠 |
(Chemicals used for treatment of water intended for human consumption. Trisodium orthophosphate.) |
| NF L22-439-2000 |
航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.ISO M或ISO MJ螺纹.４H公差级 |
(Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H tolerance class.) |
| NF C93-400-2-1-2002 |
电子设备连接器.试验和测量.第2-1部分:带电连续性和接触电阻试验.试验2a:接触电阻.毫伏法 |
(Connectors for electronic equipment - Tests and measurements - Part 2-1 : electrical continuity and contact resistance tests - Test 2a : contact resistance - Millivolt level method.) |
| NF C60-002-1994 |
家用及类似用低压电路用连接装置.第2-2部分:不带螺钉型夹件的分开的部件连接装置的特别要求 |
(Connecting devices for low voltage circuits for household and similar purposes. Part 2-2 : particular requirements for connecting devices as separate entities with screwless-type clamping units.) |
| NF C48-332-5-2002 |
警报系统.安全系统用CCTV监视系统.第5部分:电视传播 |
(Alarm systems - CCTV surveillance systems for use in security applications - Part 5 : video transmission.) |
| NF E11-033-1994 |
钢制规.光滑塞规的选择 |
(Gauges. Option for plain plug gauges.) |
| NF E48-050-1-1994 |
液压传动的连接和一般应用.油口和具有ISO261螺纹和O型环密封的螺柱端头.第1部分:载头壳体内具有O形环的油口 |
(Connections for fluid power and general use. Ports and stud ends with iso 261 threads and O-ring sealing. Part 1 : ports with O-ring seal in truncated housing.) |
| NF H35-024-1986 |
制瓶工业.塞紧或啮合的瓶盖用２６、２９、３２、３６、４４型的塑料瓶口.尺寸 |
(Bottling industry. Plastic finishes for ratched cap or sealable cap. Finishes of 26-39-32-36-44 diameters. Dimensions.) |
| NF X31-120-2003 |
土质.铜、铁、锰、锌含量的测定.在有乙二胺四乙酸存在的情况下用乙酸铵提取法 |
(Soil quality - Determination of copper, iron, manganese and zinc contents - Extraction by means of ammonium acetate in presence of EDTA.) |
| NF S94-059-1997 |
外科植入物.金属材料.可锻高氮不锈钢 |
(Implants for surgery. Metallic materials. Wrought high nitrogen stainless steel.) |
| NF A89-510/A1-2003 |
焊接无损检验.焊接接头射线照相检验 |
(Non-destructive examination of welds - Radiographic examination of welded joints.) |
| NF T70-364-2003 |
国防用高能材料.物理-化学分析和性能.通过压缩粉末炸药证实其效能 |
(Energetic materials for defense - Physical-chemical analysis and properties - Implementation ability by compression of powdered explosives.) |
| NF S92-051-1999 |
实验室诊断医疗装置.微生物用培养基.培养基的性能标准 |
(In vitro diagnostic medical devices. Culture media for microbiology. Performance criteria for culture media.) |
| NF T94-153-1998 |
人类用水的处理试剂.硫化铁(三价)(欧洲标准EN 891) |
(Chemicals used for treatment of water intended for human consumption. Iron (III) chloride sulfate.) |
| NF V18-124-2002 |
动物饲料.测定钙、铜、铁、镁、锰、钾、钠和锌含量.用原子吸收光谱测量法 |
(Animal feeding stuffs - Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc - Method using atomic absorption spectrometry.) |
| NF C58-660-2-2002 |
袖珍二次锂电池和蓄电池.第2部分:二次锂电池 |
(Secondary lithium cells and batteries for portable applications - Part 2 : secondary lithium batteries.) |
| NF C26-218-1972 |
绝缘材料的试验方法. 高温绝缘材料的绝缘电阻率和横向电阻率的试验方法 |
(Methods of testing insulating materials. Method of test for electrial resistance and resistivity of insulating materials at elevated temperatures.) |
| NF U44-303-2002 |
土壤改良剂和生长媒介.氯化钙/DTPA (CAT)可溶性滋养物的萃取 |
(Soil improvers and growing media - Extraction of calcium chloride/DTPA (CAT) soluble nutrients.) |
| NF C26-230-1970 |
绝缘材料的试验方法.测定工频、音频和无线电频率用电绝缘材料介电常数和离散因子的推荐方法 |
(Methods of testing insulating materials. Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating material at power, audio and radio freq.) |
| NF C31-023-3/A1-1998 |
NF EN 60851-3-1998的修改1 |
() |
| NF E55-230-1989 |
复印机和文件复制机.符号 |
(Duplicators and document copying machines. Symbols.) |
| NF S93-102-1997 |
含水非肠道药配制剂用弹性件 |
(Elastomeric parts for aqueous parenteral preparations.) |
| NF S31-640-1997 |
声学.现场用消声器的测量 |
(Acoustics. Measurements on silencers in situ.) |
| NF Z84-342-3-2001 |
电磁兼容性和无线电光谱物质(ERM).欧洲数字蜂窝电信系统 |
(GSM 900MHZ和DGS 1800MHZ)的电磁兼容性.第3部分:基本站无线电和附属设备及与2相GSM要求相符的重复器() |
| NF T56-123/A1-1997 |
NF T56-123-1974的补充件 A1 |
() |
| NF C20-402-1996 |
环境试验.第4部分:技术规范编制者用信息.试验汇总表 |
(Environmental testing. Part 4 : information for specification writers. Test summaries.) |
| NF C26-136-2-1999 |
电工用波纹纸板和纸板.第2部分:试验方法 |
(Corrugated pressboard and presspaper for electrical purposes. Part 2 : methods of test.) |
| NF C26-011-1-2003 |
绝缘材料.电工用工业刚性模制矩形和六边形横截面的热固性树脂基层压管材和棒材.第1部分:定义、名称与符号和 |
(Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1 : definitions, des) |
| NF S93-031-4-1997 |
一次性使用、无菌管内导管.第4部分:球形扩张导管 |
(Sterile, single-use intravascular catheters - Part 4 : balloon dilatation catheters.) |
| NF C26-145-1-1998 |
电气应用的塑料膜的规范.第1部分:定义和一般要求 |
(Specification for plastic films for electrical purposes. Part 1 : definitions and general requirements.) |
| NF P19-105-1997 |
热压充气混凝土弯曲强度的测定 |
(Determination of flexural strength of autoclaved aerated concrete.) |
| NF P50-749-1-1999 |
建筑产品及元件的热性能.评估实验室测量热传递性能的特定标准.第1部分:通用标准 |
(Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer properties. Part 1 : common criteria.) |
| NF C27-140-1995 |
石油产品和润滑剂.三重磷酸脂涡轮控制流体.规范 |
(Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category iso-L-tcd). Specifications.) |
| NF E48-685-2000 |
液压动力.过滤元件的过滤性能的评价多途径方法 |
(Hydraulic fluid power - Multi-pass method for evaluating filtration performance of a filter element.) |
| NF C57-300-1999 |
光电系统性能检测.测量、数据交换和分析指南 |
(Photovoltaic system performance monitoring - Guidelines for measurement, data exchange and analysis.) |
| NF S93-031-5-1997 |
一次性使用、无菌管内导管.第5部分:与针头相连的辅助导管 |
(Sterile, single-use intravascular catheters - Part 5 : over-needle peripheral catheters.) |
| NF A35-501-1993 |
非合金结构钢的热钆产品.交货技术条件? |
(Hot-rolled products of non alloy structural steels. Technical delivery conditions.) |
| NF P18-953-4-2002 |
混凝土结构的防护和维修用产品和系统.试验方法.可加工性的测定.第4部分:备用泥浆高空的应用 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4 : application of repair mortar overhead.) |
| NF A09-590-3-2002 |
无损检验.磁粉试验.一般原则 |
(Non-destructive testing - Magnetic particle testing - Part 3 : equipment.) |
| NF X43-001-1982 |
空气质量.词汇 |
(Air quality. Vocabulary.) |
| NF X50-761-1998 |
职业培训.职业培训体系服务和服务措施.规范 |
(Professional training. Professional training body. Service and provision of service : specifications.) |
| NF T76-501-1981 |
防水涂层纸(胶粘牛皮纸-涂胶纸).粘着力的测定 |
(Coated papers reactive to water (adhesive kraft paper - Gummed paper). Determination of adhesion.) |
| NF L22-159-1975 |
锥顶120°半圆头开槽埋头螺钉.国际单位米制螺纹 |
(Slotted raised 120 degrees countersunk head screws with cone point. Sim thread (rech.).) |
| NF S72-402-1997 |
马术活动用防护帽 |
(Helmets for equestrian activities.) |
| NF Z13-030-1994 |
管理,商业和运输业电子数据交换.应用规则 |
(Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules.) |
| NF S56-112-1998 |
旅游食宿车.家庭渡假旅居挂车.住所的卫生和安全要求 |
(Leisure accommodation vehicles. Caravan holiday homes. Habitation requirements relating to health and safety.) |
| NF V03-135-2003 |
食品.高效液相色谱法测定维生素C含量 |
(Foodstuffs - Determination of vitamin C by high performance liquid chromatography.) |
| NF Z84-175-3-1997 |
无线电设备和系统(RES).数字增强无绳通信(DECT).一般接口.第3部分:中等(MAC)存取控制层 |
(Radio Equipment and Systems (RES). Digital Enhanced Cordless Telecommunications (DECT). Common Interface. Part 3 : Medium Access Control (MAC) layer.) |
| NF C46-811-400-2002 |
海上导航和无线电通信设备及系统.数字接口.第400部分:多通话器和多受话器.船用系统互连.简介和一般原则 |
(Martitime navigation and radiocommunication equipment and systems - Digital interfaces - Part 400 : multiple talker and multiple listerners - Ship systems interconnection - Introduction and general pr) |
| NF U42-607-2001 |
肥料.螯合的微量养料含量和微量养料的螯合系数测定用阳离子交换树脂处理 |
(Fertilizers - Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients.) |
| NF T57-153-7-2002 |
纤维增强塑料.试验板的生产方法.第7部分:树脂压铸法 |
(Fibre-reinforced plastics - Methods of producing test plates - Part 7 : resin transfer moulding.) |
| NF C11-205-2001 |
架空线.架空线型风振减振器的要求和测试 |
(Overhead lines - Requirements and tests for Stockbridge type aeolian vibration dampers.) |
| NF C20-940-1990 |
着火危险试验.第4部分:火灾试验术语 |
(Fire hazard testing. Part 4 : terminology concerning fire tests.) |
| NF E62-317-1993 |
机床的多轴头.工件夹紧底盘.第2部分:800mm 较厚标定尺寸的工件夹紧底盘 |
(Modular units for machine tools. Workholding pallets. Part 2 : workholding pallets of nominal size greater than 800 mm.) |
| NF C93-840-1-50-2002 |
光学纤维.第1-50部分:测量方法和试验规程.湿热(稳态) |
(Optical fibres - Part 1-50 : measurement methods and test procedures - Damp heat (steady state).) |
| NF A00-100-1993 |
钢及钢制品的一般交货技术要求 |
(General technical delivery requirements for steel and steel products.) |
| NF S60-214-2001 |
灭火介质.泡沫浓缩.第3部分:与水混溶的液体表面应用的媒介物低膨胀泡沫浓缩的规范 |
(Fire extinguishing media - Foam concentrates - Part 4 : specification for low expansion foam concentrates for surface application to water-miscible liquids.) |
| NF P62-100-2002 |
有弹性的地板覆盖物.耐锈蚀性测定 |
(Resilient floor coverings - Determination of resistance to staining.) |
| NF C26-943-1-2002 |
电绝缘用清漆.第3部分:单项材料规范.表1:室温固化饰面清漆 |
(Varnishes used for electrical insulation - Part 3 : specifications for individual materials - Sheet 1 : ambient curing finishing varnishes.) |
| NF M07-045-2002 |
石油产品.粉尘的测定 |
(Petroleum products - Determination of ash.) |
| NF U23-111-1983 |
施肥设备.试验方法.第1部分:全幅式施肥机 |
(Fertilizer distribution equipment. Test methods. Part 1 : full width fertilizer distributors.) |
| NF P94-153-1993 |
土壤调查和试验.受拉杆试验 |
(Soils investigation and testing - Tension rod test.) |
| NF Z15-008-1996 |
识别卡.金融交易卡 |
(Identification cards. Financial transacation cards.) |
| NF V04-172-1-2003 |
奶和奶制品.铜含量的测定.第1部分:利用镉还原和光谱测量法 |
(Milk and milk products - Determination of nitrate and nitrite contents - Part 1 : method using cadmium reduction and spectrometry.) |
| NF Z85-063-2003 |
固定无线电系统.多点设备.工作频率范围31.0GHz-33.4GHz(32GHz)的多点数字无线电系统 |
(Fixed Radio Systems - Multipoint equipment - Multipoint digital radio systems operating in the 31,0 GHz to 33,4 GHz (32 GHz) frequency range.) |
| NF P15-105-2002 |
建筑用石灰.第2部分:试验方法 |
(Building lime - Part 2 : test methods.) |
| NF A89-541-1998 |
焊缝的无损检验.焊缝的穿透测试.验收等级 |
(Non-destructive examination of welds - Penetrant testing of welds - Acceptance levels.) |
| NF C26-215-1982 |
绝缘材料的试验方法.固体电绝缘材料体电阻率和表面电阻率的试验方法 |
(Method of testing insulating materials. Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials.) |
| NF S98-015-1997 |
医用消毒器.环氧乙烷消毒器.要求和试验方法 |
(Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods.) |
| NF P62-301-1996 |
弹性覆面层.黄麻或聚酯衬乙烯树脂和乙烯树脂衬聚酯基乙烯树脂的规范 |
(Resilient floor coverings. Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on polyester felt with polyvinyl chloride backing. Specification.) |
| NF U65-051-2000 |
食品加工机械.碾面机.安全和卫生要求 |
(Food processing machinery - Dough and pastry brakes - Safety and hygiene requirements.) |
| NF C96-260-4-2002 |
集成电路.150kHz-1GHz电磁辐射的测量.第4部分:传导辐射的测量.1 ohm/150 ohm直接耦合法 |
(Integrated circuits - Measurement of Electromagnetic Emissions, 150 kHz - 1 GHz - Part 4 : measurement of conducted emission - 1 ohm/150 ohm direct coupling method.) |
| NF C46-650-1999 |
分批控制.第1部分:模型和术语 |
(Batch control - Part 1 : models and terminology.) |
| NF B35-056-2003 |
实验室设备.设计和安装的推荐标准 |
(Laboratory furniture - Recommendations for design and installation.) |
| NF C52-742-1997 |
隔离变压器和安全隔离变压器的要求 |
(Isolating transformers and safety isolating transformers. Requirements.) |
| NF C93-903-6/A2-2002 |
光纤互连器件和无源元件.基本试验和测量规程.第3-6部分:检验和测量.回程损耗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6 : examinations and measurements - Return loss.) |
| NF T54-905-2002 |
塑料管道系统.热塑性压力管用端部承载或非端部承载组件和接头.内部水压下长期无漏损的试验方法 |
(Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure.) |
| NF A49-404-2-1996 |
易燃液体输送管线用钢管.交货技术条件.第2部分:B类要求的钢管 |
(Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Part 2 : pipes of requirement class B.) |
| NF E04-552-1983 |
技术制图.确定几何公差.总则，定义，符号，图纸说明 |
(Technical drawings. Geometrical tolerancing. Generalities, definitions, symbols, indications on drawings.) |
| NF P90-309-2003 |
地面无屏障私人或集体用游泳池的防护构件.游泳池棚(轻质结构和/或走廊).安全要求和试验方法 |
(Protective elements for in-ground, barrier-free, private or collective use swimming pools - Swimming pool shelters (lightweight structures and/or verandas) - Safety requirements and test methods.) |
| NF K20-001-1-1997 |
加密存储设备.防盗要求、分类和试验方法.第1部分:安全、保险库门及保险库 |
(Secure storage units. Requirements, classification and methods of test for resistance to burglary. Part 1 : safes, strongroom doors and strongrooms.) |
| NF A84-530-1996 |
焊接、切割和加热用手动吹管.规范和试验 |
(Manual blowpipes for welding, cutting and heating. Specifications and tests.) |
| NF C42-162-1993 |
测量电阻器用直流电桥 |
(D.C. bridges for measuring resistance.) |
| NF A36-226-2001 |
具有规定的高温特性的压力容器用热轧可焊接钢棒 |
(Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties.) |
| NF C97-105-2002 |
磁带录像机的时间和控制编码 |
(Time and control code for video tape recorders.) |
| NF L12-671-2002 |
航空航天系列.耐腐蚀钢制成的流体用圆形管.直径≥3.2 或者≤100mm;厚度≥0.32 或者≤ 2.5mm.尺寸 |
(Aerospace series - Circular tubes for fluids in corrosion resistant steel - Diameter D more than or equal to 3,2 mm and less than or equal to 100 mm - Thickness a more than or equal to 0,32 mm and les) |
| NF A03-000-2000 |
铜和铜合金.螺旋延伸数的测定 |
(Copper and copper alloys - Determination of spiral elongation number.) |
| NF T70-527-2003 |
国防用高能材料.安全性、易损性.对静电放电的敏感性 |
(Energetic materials for defense - Safety, vulnerability - Sensitivity to electrostatic discharges.) |
| NF S71-101-1992 |
雪崩遇难者的寻找仪器.发射 /接收系统.安全要求和试验 |
(Avalanche beacons. Transmitter/receiver systems. Safety requirements and testing.) |
| NF R13-503-2002 |
起动用铅酸蓄电池组.一般要求、试验和计数方法 |
(Lead-acid starter batteries - General requirements, methods of test and numbering.) |
| NF S31-004-1-2000 |
建筑物声学.由元件性能评估建筑物声学性能.第1部分:房间之间的声音的隔绝 |
(Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1 : airborne sound insulation between rooms.) |
| NF P18-923-1999 |
混凝土结构的修复和保护用产品和系统.试验方法.脱落法测量粘结强度 |
(Products and systems for the repair and protection of concrete structures. Test methods. Measurement of bond strength by pull-off.) |
| NF C71-009/A1-1994 |
NF EN 60598-2-9-1991的修改1 |
() |
| NF E66-208-2003 |
直柄锥形凹模铣刀 |
(Tapered die-sinking cutters with parallel shanks.) |
| NF Z83-543-1997 |
数字蜂窝通信系统(第2阶段).呼叫传送(CF)的增补服务.第2阶段(GSM 03.82) |
(Digital cellular telecommunications system (Phase 2). Call forwarding (CF) supplementary service. Stage 2 (GSM 03.82).) |
| NF S12-127-1999 |
眼科仪器.视野计 |
(Ophthalmic instruments. Perimeters.) |
| NF P84-317-2000 |
防水用沥青膏.定义、要求和试验方法 |
(Mastic asphalt for waterproofing - Definitions, requirements and test methods.) |
| NF M07-035-1998 |
柴油燃料点火质量的测定.十六烷法 |
(Determination of the ignition quality of diesel fuels. Cetane engine method.) |
| NF R10-215-2002 |
道路车辆.正面固定障碍物碰撞试验程序 |
(Road vehicles - Frontal fixed barrier or pole impact test procedure.) |
| NF C93-406-1-2002 |
有质量评定的直流低频模拟及数字高速数据应用系统用连接器.第1部分:总规范 |
(Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1 : generic specification.) |
| NF L31-206-1985 |
航天系列.轴承.系列8和系列9、单排耐腐蚀钢制、飞机机架用滚珠轴承.(EN2011)的尺寸与载荷 |
(Aerospace series. Bearings, airframe rolling, rigid single row ball bearings, in corrosion resisting steel, diameter series 8 and 9, dimensions and loads.) |
| NF M07-073-2001 |
石油产品.饱和馏分中芳香烃总含量的测定.低含量的紫外线吸收光学测定法 |
(Petroleum products - Determination of the content of total aromatic hydrocarbons in saturated fractions - Ultra-Violet absorbance spectrometric method for low contents.) |
| NF C73-854/A11-2002 |
家用和类似用途电器的安全.第2-54部分:用液体的表面清洗电器的特殊要求 |
(Safety of household and similar electrical appliances - Part 2-54 : particular requirements for surface-cleaning appliances employing liquids.) |
| NF T94-362-1997 |
生活用水处理用化学制品.钠硅 |
(Chemicals used for treatment of water intended for human consumption. Sodium silicate.) |
| NF A50-640-1-2001 |
铝及铝合金.挤制合金EN AW-6060 and EN AW-6063精密型材.第1部分:检验和交货技术条件 |
(Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1 : technical conditions for inspection and delivery.) |
| NF S61-936-2002 |
防火安全系统.防火报警设备.设计要求 |
(Fire safety systems - Fire alarm equipments - Design requirements.) |
| NF A82-112-1-2002 |
电阻焊水冷次级线圈连接电缆.第1部分:双导体连接电缆的尺寸和要求 |
(Water-cooled secondary connection cables for resistance welding - Part 1 : dimensions and requirements for double-conductor connection cables.) |
| NF F66-077-2-2002 |
铁路设施.车辆电气设备.第2部分:电工元件.一般规则 |
(Railway applications - Electric equipment for rolling stock - Part 2 : electrotechnical components - General rules.) |
| NF S95-150-1998 |
医用湿度计.加湿系统的一般要求 |
(Humidifiers for medical use - General requirements for humidification systems.) |
| NF M88-709-1991 |
液态烃的分配装置.内容量大于11m**3的小于120m**3石油液 化气储存用钢制固定贮罐.尺寸 |
(Equipment for the distribution of liquefied hydrocarbons. Fixed steel tanks for the storage of liquefied petroleum gases, with an internal volume above 11 cubic meters to 120 cubic meters exclusive. Dimensions.) |
| NF L22-545-1975 |
内锁紧系留螺母.单耳单孔.国际单位米制螺纹 |
(Self-locking anchor nuts, single lug with one hole. Sim thread (rech.).) |
| NF T75-245-1986 |
香精油.皱叶绿薄荷香精油 |
(Essentail oils. Oil of spearmint ({Mentha} {Spicata} {Linnaeus}).) |
| NF C93-537-3-12-2001 |
通信电缆.试验方法规范.第3-12部分:机械试验方法.喷枪的破坏性 |
(Communication cables - Specifications for test methods - Part 3-12 : mechanical test methods - Shot gun damage.) |
