| 标准号 |
中文名 |
英文名 |
| NF C94-232-1-1993 |
无线电发射机的测量方法.第12部分:音响设备和电视播放设备用发射机和换位器的草拟说明导则.第1节:规定特性 |
(Methods of measurement for radio transmitters. Part 12 : guideline for drawing up descriptive leaflets for transmitters and transposers for soud and television broadcasting. Characteristics to be specified.) |
| NF Z83-517-1996 |
数字蜂窝状电信系统(第2阶段).多用户(MPTY)补充服务.第1阶段(GSM 02.84) |
(Digital cellular telecommunications system (phase 2). Multiparty (MPTY) supplementary services. Stage 1 (GSM 02.84).) |
| NF S72-509-7-2000 |
防护头盔.试验方法.第7部分:耐火性 |
(Protective helmets - Test methods - Part 7 : flame resistance.) |
| NF T47-253-1997 |
普通供水用纺织材料增强的橡胶软管规范 |
(Rubber hoses, textile-reinforced, for general purpose water applications. Specification.) |
| NF C20-409-2000 |
环境测试.第5部分: 试验方法起草指南.术语和定义 |
(Environmental testing - Part 5 : guide to drafting of test methods - Terms and definitions.) |
| NF E22-370-2002 |
滚动轴承.滚针轴承尺寸系列48、49和69.边界尺寸和公差 |
(Rolling bearings - Needle roller bearings, dimension series 48, 49 and 69 - Boundary dimensions and tolerances.) |
| NF T54-016-4-1999 |
供水用塑料管道系统.未增塑聚氯乙烯.第4部分:管件和附件 |
(Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4 : valves and ancillary equipment.) |
| NF M87-204-2000 |
石油和天然气工业.火焰控制和减缓及近海生产设备防爆.要求和指南 |
(Petroleum and natural gaz industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines.) |
| NF T90-011-2001 |
水质.溶解二氧化碳含量的测定 |
(Water quality - Determination of dissolved carbon dioxide.) |
| NF C73-831-2000 |
家用和类似用途电器的安全.第2-31部分:炉罩的特殊要求 |
(Safety of household and similar electrical appliances - Part 2-31 : particular requirements for range hoods.) |
| NF T90-107-2002 |
水质.氰化物指数的测定 |
(Water quality - Determination of cyanide index.) |
| NF C97-010/A1-2002 |
电声学.倍频带和分倍频带滤波器 |
(Electroacoustics - Octave-band and fractional-octave-band filters.) |
| NF X50-001-4-9-2000 |
动力站设备的征购指南.第4部分:锅炉附件.第9节:吹灰机 |
(Guide for procurement of power station equipment - Part 4 : boiler auxiliaries - Section 9 : sootblowers.) |
| NF A58-002-1999 |
铅及铅合金.电缆护套和套筒用铅合金锭? |
(Lead and lead alloys - Lead alloys ingots for electric cable sheathing and for sleeves.) |
| NF C96-012-2000 |
集成电路.存储器件插脚配置 |
(Integrated circuits - Memory devices pin configurations.) |
| NF E90-322-1/A2-2002 |
便携式手提动力工具.手柄振动的测量.第2部分:凿锤和铆钉锤 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Part 2 : chipping hammers and riveting hammers.) |
| NF C93-112-20-2000 |
电子设备用固定电容器.第20部分:分规范:金属化聚苯硫醚膜介质直流片式固定电容器 |
(Fixed capacitors for use in electronic equipment - Part 20 : sectional specification : fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors.) |
| NF X35-400-3-2000 |
控制中心的人类工效学设计.第3部分:控制室布置 |
(Ergonomic design of control centres - Part 3 : control room layout.) |
| NF E32-110-1-2002 |
水管锅炉和辅助设备.第1部分:总则 |
(Water-tube boilers and auxiliary installations - Part 1 : general.) |
| NF F07-101-2002 |
铁路设施.通过抛起路基模拟物进行冲击试验 |
(Railway applications - Schock test by throwing up ballast simulation.) |
| NF C20-750-2000 |
环境试验.第2部分:试验.试验 Z/AFc:散热和非散热试样的低温/振动(正弦)组合试验 |
(Environmental testing - Part 2 : tests - Tests Z/AFc : combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens.) |
| NF P84-120-2000 |
防水用柔性薄板.屋面防水用沥青片.颗粒粘性的测定 |
(Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of granules adhesion.) |
| NF Z81-707-2003 |
电子程序指南(EPG).用电子数据传输的TV指南协议 |
(Electronic Programme Guide (EPG) - Protocol for a TV Guide using electronic data transmission.) |
| NF X43-640-2002 |
气体分析.词汇 |
(Gas analysis - Vocabulary.) |
| NF P18-653-1-2000 |
集料的热性能和气候老化性能试验.第1部分:耐冻性和耐解冻性测定 |
(Test for thermal and weathering properties of aggregates - Part 1 : determination of resistance to freezing and thawing.) |
| NF V45-073-2002 |
加工的鱼.用水生动物加工的熟肉酱、terines和肉酱.规范 |
(Processed fish - Rillettes, terines and mousses made from aquatic animals - Specifications.) |
| NF T60-264-2002 |
动植物脂肪和油.蔬菜脂肪和油过脂肪酸异构体含量测定.气相色谱法 |
(Animal and vegetable fats and oils - Determination of the content of trans fatty acid isomers of vegetable fats and oils - Gas chromatographic method.) |
| NF A49-875-8-2000 |
钢管的无损检验.第8部分:检测纵向缺陷用电焊钢管焊缝的自动超声试验 |
(Non-destructive testing of steel tubes - Part 8 : automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections.) |
| NF J37-825-2-2002 |
充气船.第2部分:最大电动机功率为4.5KW至15KW的船 |
(Inflatable boats - Part 2 : boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive.) |
| NF Z15-506-1996 |
识别卡系统.电信集成电路卡和终端.第6部分:电信特征 |
(Identification card systems. Telecommunications integrated circuit(s) cards and terminals. Part 6 : telecommunication features.) |
| NF E37-504-2-1999 |
燃气轮机.废气排放.第2部分:自动排放监测 |
(Gas turbines - Exhaust gas emission - Part 2 : automated emission monitoring.) |
| NF S78-503-2-2003 |
听力保护器.试验.第2部分:声学试验方法 |
(Hearing protectors - Testing - Part 2 : acoustic test methods.) |
| NF E29-321-1999 |
阀门.用水作为试验液体的流动阻力试验? |
(Valves - Test of flow resistance using water as test fluid.) |
| NF T66-047-2000 |
沥青和沥青粘合剂.测定在热和空气影响下的耐硬化性.第2部分:TFOT 法 |
(Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air - Part 2 : TFOT method.) |
| NF X43-507-1-2000 |
空气质量.数据的交换.第1部分:一般数据格式 |
(Air quality - Exchange of data - Part 1 : general data format.) |
| NF C20-709-2000 |
环境试验.第2部分:试验.太阳辐射试验指南 |
(Environmental testing - Part 2 : tests - Guidance for solar radiation testing.) |
| NF A03-159-2000 |
金属材料.厚度3mm或小于3mm的板材或带材.反向弯曲试验 |
(Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test.) |
| NF T54-941-1999 |
塑料管道系统.热水和冷水系统.真空密封性的检验方法 |
(Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum.) |
| NF T65-001-1999 |
沥青和沥青粘合剂.铺路级沥青规范 |
(Bitumen and bituminous binders - Specifications for paving grade bitumens.) |
| NF C48-300-4/A1-1998 |
NF EN 50130-4-1996的修改件1 |
() |
| NF P93-523-2002 |
工地设备.公众使用的临时金属制楼梯 |
(Building site equipment - Temporary metallic stairways intended for public use.) |
| NF P41-302/A1-2002 |
纤维混凝土制品.压力管和连接件 |
(Fibre-cement products - Pressure pipes and joints.) |
| NF Z82-202-1996 |
综合业务数字网(ISDN).呼叫偏转(cd)的补充服务.服务说明 |
(Integrated Services Digital Network (ISDN). Call deflection (cd) supplementary service. Service description.) |
| NF T54-942-1999 |
塑料管道系统.输送热水和冷水用的热塑管和附属配件.连接件对压力变化负载的稳定性的检测方法 |
(Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling.) |
| NF P98-663-2-2000 |
道路标记材料.反射道路柱.第2部分:道路试验性能规范 |
(Road marking materials - Retroreflecting road studs - Part 2 : road test performance specifications.) |
| NF L13-145-2001 |
航空航天系列.金基合金AU-B40001.钎焊用填充金属.金属丝 |
(Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Wire.) |
| NF M11-001-2003 |
固体矿物燃料.煤.坩埚膨胀指数的测定 |
(Solid mineral fuels - Coal - Determination of crucible swelling number.) |
| NF C17-150-2000 |
避雷装置.电信线路.第1部分:光纤设备 |
(Lightining protection - Telecommunication lines - Part 1 : Fibre optic installations.) |
| NF S31-085-2002 |
声学.道路交通噪声的表征和测量.一般测量规范 |
(Acoustics - Characterization and measurement of road traffic noise - General measurement specifications.) |
| NF S95-144-2000 |
病人呼吸混合气体用氧气监测仪.特殊要求 |
(Oxygen monitors for patient breathing mixtures - Particular requirements.) |
| NF C61-151/A11-1998 |
NF EN 61008-2-1-1995的修改件11 |
() |
| NF T47-281-1997 |
橡胶软管和软管组件.液压型金属丝编织物增强.规范 |
(Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification.) |
| NF T60-205-2001 |
动植物脂肪和油.不可皂化物的测定.二已醚萃取法 |
(Animal and vegetable fats and oils - Determination of unsaponifiable matter - Method using diethyl ether extraction.) |
| NF E86-601-1-2003 |
检漏系统.第1部分:总则 |
(Leak detection systems - Part 1 : general principles.) |
| NF L22-168-1984 |
有NF L22-070 十字槽的紧公差100°沉头螺钉 |
(BOLT,100 DEGREES COUNTERSUNK HEAD,CLOSE TOLERANCE,NF L 22-070,CROSS RECESS.) |
| NF C93-840-1-30-2002 |
光学纤维.第1-30部分:测量方法和试验规程.纤维验证试验 |
(Optical fibres - Part 1-30 : measurement methods and test procedures - Fibre proof test.) |
| NF E02-202-1994 |
光滑工件公差的检验.极限规.高达500mm的“生产 ”极限规的公差与允许磨损 |
(Inspection of tolerances of plain workpieces. Limit gauges. Tolerances and permissible wear of manufacture limit gauges up to 500 mm.) |
| NF M87-212-2002 |
石油和天然气工业.钻井和生产设备.井口和井口采油装置 |
(Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment.) |
| NF P18-653-3-2002 |
集料的风化特性和热特性试验.第3部分:玄武岩的煮沸试验 |
(Tests for thermal and weathering properties of aggregates - Part 3 : boiling test for “Sonnenbrand basalt“.) |
| NF D36-302-1991 |
家用煤气设备用低压后力调节器 |
(Pressure governors for gas appliances for inlet pressures up to 200 mbar.) |
| NF L13-235-2001 |
航空航天系列.钢FE-WM1002(X13Cr13).焊接用填充金属.金属丝和金属杆 |
(Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding - Wire and rod.) |
| NF T66-032-2000 |
沥青和沥青粘合剂.测定在热和空气影响下的耐硬化性.第1部分:RTFOT 法 |
(Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air - Part 1 : RTFOT method.) |
| NF X50-001-6-6-2000 |
动力站设备的征购指南.第6部分:涡轮附件.第6节:湿和湿/干冷却塔 |
(Guide for the procurement of power station equipment - Part 6 : turbine auxiliaries - Section 6 : wet and wet/dry cooling towers.) |
| NF S51-214/A1-2000 |
玩具的安全.第3部分:特定元件的移动 |
(Safety of toys - Part 3 : migration of certain elements.) |
| NF R80-501-1980 |
软塑料和软微孔塑料.易脏特性 |
(FLEXIBLE PLASTICS AND FLEXIBLE CELLULAR PLASTICS. STAINING CAPABILITY.) |
| NF M07-102-2000 |
柴油燃料乳剂中的水.闪点测定.开放杯法 |
(Water in diesel fuel emulsions - Determination of flash point - Cleveland open cup method.) |
| NF Z83-593-1998 |
蜂窝式数字通信系统(阶段2).基础站控制器.收发两用基础站(BSC-BTS)接口.接口原子(GSM 08.52) |
(Digital cellular telecommunications system (Phase 2). Base Station Controller. Base Transceiver Station (BSC - BTS) interface. Interface principles (GSM 08.52).) |
| NF T76-156-2-2001 |
结构胶粘剂.腐蚀性.第2部分:对黄铜衬底腐蚀性的测定和分类 |
(Structural adhesives - Corrosion - Part 2 : determination and classification of corrosion to a brass substrate.) |
| NF C01-826/A1-1999 |
电工词汇.第826章:建筑物的电气设施 |
(Electrotechnical vocabulary - Chapter 826 : electrical installations of buildings.) |
| NF P45-204-2-2001 |
DTU 61.1.家用燃气设施.第2部分:技术规范.总安排 |
(DTU 61.1 - Gas installation in domestic premises - Partie 2 : technical specifications - General dispositions.) |
| NF P94-321-2000 |
特殊土工技术工程的实施.地锚 |
(Execution of special geotechnical work - Ground anchors.) |
| NF C46-061-2002 |
电气/电子/可编程序的电子安全相关系统的功能安全.第1部分:一般要求 |
(Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1 : general requirements.) |
| NF Z84-718-2000 |
无线电设备和系统(TES).雪崩信标.发射接收系统 |
(Road Equipment and Systems (RES) - Avalanche Beacons - Transmitter-receiver systems.) |
| NF Z85-291-1997 |
网络特性(NA).操作系统/网络元件(OS/NE)接口的用户管理(CA)功能规范 |
(Network Aspects (NA). Functional specification of Customer Administration (CA) on the Operations System/Network Element (OS/NE) interface.) |
| NF C52-176-1-2000 |
电力变压器.第1部分:通则 |
(Power transformers - Part 1 : general.) |
| NF T60-138-2004 |
石油及相关产品.与热表层接触的流体易燃性特征的测定.歧管点火试验 |
(Petroleum and related products - Determination of flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test.) |
| NF V37-038-2004 |
烟草.还原的碳水化合物含量的测定.连续流分析法 |
(Tobacco - Determination of the content of reducing carbohydrates - Continuous-flow analysis method.) |
| NF Z89-283-2001 |
商业通信(BTC).私人网络对公共网络的数字化连接声音和回声值的设计 |
(Business TeleCommunications (BTC) - Planning of loudness rating and echo values for private networks digitally connected to the public network.) |
| NF E25-652-2001 |
沉头内六角攻丝螺钉 |
(Hexalobular socket countersunk head tapping screws.) |
| NF U02-024-2002 |
农林机械.行间锄草机.安全性 |
(Agricultural and forestry machinery - Inter-row mowing units - Safety.) |
| NF F13-835-1989 |
铁路车辆.有防护装置的机械通风电采暖器具 |
(RAILWAY ROLLING STOCK. ELECTRIC AIR HEATERS WITH SHIELDED ELEMENTS,WITH FORCED VENTILATION.) |
| NF M88-557-1-2003 |
地上用玻璃纤维增强塑料槽罐和容器.第1部分:原材料.规格条件和验收条件 |
(GRP tanks and vessels for use above ground - Part 1 : raw materials - Specification conditions and acceptance conditions.) |
| NF B54-151-2-2000 |
胶合板.分类和术语.第2部分:术语 |
(Plywood - Classification and terminology - Part 2 : terminology.) |
| NF C03-201-1986 |
示意图用图形符号.第1部分：综合.总索引 |
(Graphical symbols for diagrams. Part 1 : general information, general index.) |
| NF C47-739-2002 |
家用和类似用途的电气自动控制器.第2-9部分:热敏控制器特殊要求 |
(Automatic electrical controls for household and similar use - Part 2-9 : particular requirements for temperature sensing controls.) |
| NF C01-605-1985 |
电工词汇.第605章:电的生产.传输和配给.变电站 |
(Electrotechnical vocabulary. Chapter 605 : generation, transmission and distribution of electricity. Substations.) |
| NF X45-309-2000 |
过滤盒.试验方法.流率循环变化的耐性 |
(Filter cartridges - Test methods - Resistance to flowrate cyclic variations.) |
| NF T76-118-1-2002 |
非结构用途热塑性木胶分类 |
(Classification of thermoplastic wood adhesives for non-structural applications.) |
| NF C48-438-2002 |
报警系统.侵入检测.事件控制器.与中央报警装置或电话报警送话器相结合的记录功能 |
(Alarm systems - Intrusion detection - Events controller-recorder function integrated in central alarm units or telephone alarm transmitters.) |
| NF A49-875-10-2000 |
钢管的无损检验.第10部分:检测缺陷用自动熔弧焊钢管焊缝的X射线照相试验 |
(Non-destructive testing of steel tubes - Part 10 : radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections.) |
| NF X43-333-1-2002 |
固定源辐射.粉尘的小范围质量浓度的测定.第1部分:人工重量测定法 |
(Stationary source emissions - Determination of low range mass concentration of dust - Part 1 : manual gravimetric method.) |
| NF M50-005-2-2000 |
燃气供应系统.最大操作压力高达(和包括)16巴的管线.第2部分:聚乙烯管的特殊功能推荐 |
(Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 2 : specific functional recommendations for polyethylene (MOP up to and including 10 bar).) |
| NF C15-163/A1-2002 |
X射线产生和使用设备.牙科诊断设备的特殊要求 |
(Installations for the generation and application of x-rays - Particular requirements for dental diagnostic installations.) |
| NF T76-331-2001 |
皮革和鞋靴材料用胶粘剂.持久胶粘剂.升高温度下粘结剂的耐热试验 |
(Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature.) |
| NF P94-500-2000 |
岩石工程.分类和规范 |
(Geotechnical missions - Classification and specifications.) |
| NF F37-012-1989 |
液体或低压溶解气体运输用油罐车. 识别和装载牌 |
(TANK WAGONS FOR THE CARRIAGE OF LIQUEFIED OR UNDER PRESSURE DISSOLVED GASES. IDENTITY AND LOADING PLATE.) |
| NF F33-500-1-2004 |
铁路设施.新型和改造的货运车辆的测量.第1部分:测量原则 |
(Railway applications - Measuring of new and modified freight wagons - Part 1 : measuring principles.) |
| NF C93-564/A3-1983 |
NF C 93-564-1981的补充1 |
() |
| NF L24-020-1989 |
航空和航天.1100MPa强度级和MJ螺纹合金钢螺钉.供应品的规范 |
(AEROSPACE. ALLOY STEEL BOLTS WITH STRENGTH CLASSIFICATION 1100 MPA AND MJ THREADS. PROCUREMENT SPECIFICATION.) |
| NF S92-060-2003 |
医学实验室.质量和资格的特殊要求 |
(Medical laboratories - Particular requirements for quality and competence.) |
| NF T66-048-2000 |
沥青和沥青粘合剂.测定在热和空气影响下的耐硬化性.第3部分:RFT 法 |
(Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air - Part 3 : RFT method.) |
| NF S74-509-7-2000 |
手提式链锯使用者防护服.第7部分:链锯防护手套的要求 |
(Protective clothing for users of hand-held chainsaws - Part 7 : requirements for chainsaw protective gloves.) |
| NF C93-902-43-2000 |
.第2-43部分:试验.单模PC光纤连接器回波损耗的筛选 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-43 : tests - Screen testing of return loss of single mode PC optical fibre connector.) |
| NF C31-685-2001 |
特种绕组线规范.第35部分:155级带粘结层的可焊接聚氨酯漆包圆铜线 |
(Specifications for particular types of winding wires - Part 35 : solderable polyurethane enamelled round copper wire, class 155, with a bonding layer.) |
| NF B35-355-2000 |
实验室器皿.脱脂牛奶用双容量奶油测量计 |
(Laboratory glassware - Double volume butyrometer for skinned milk.) |
| NF E63-136-1992 |
压制工具.矩形截面压力弹簧.骨架尺寸和色彩编码 |
(Tools for pressing. Compression springs with rectangular section. Housing dimensions and colour coding.) |
| NF C73-858-2000 |
家用和类似用途电器的安全.第2-58部分:商用电动洗碗机的特殊要求 |
(Safety of household and similar electrical appliances - Part 2-58 : Particular requirements for commercial electric dishwashing machines.) |
| NF P62-101-2002 |
有弹性的地板覆盖物.模拟家具腿移动的影响的测定 |
(Resilient floor coverings - Determination of the effect of the simulated movement of a furniture leg.) |
| NF P98-846-43-2003 |
松散的和液力粘合的混合料.第43部分:液力粘合混合料弹性模数测定的试验方法 |
(Unbound and hydraulically bound mixtures - Part 43 : test method for the determination of the modulus of elasticity of hydraulically bound mixtures.) |
| NF X31-006-2000 |
土壤的质量.NPK施肥的术语 |
(Quality of soils - Terminology of NPK fertilization.) |
| NF C90-101-10-2002 |
电视信号、声信号和交互型业务用电缆网络.第10部分:返回路径的系统性能 |
(Cable networks for television signals, sound signals and interactive services - Part 10 : system performance for return paths.) |
| NF E75-085-2001 |
覆层磨料.第2部分:萃取尘埃用带孔磨料板 |
(Coated abrasives - Part 2 : abrasive sheets with holes dust extraction.) |
| NF C92-130-2002 |
音频、视频和类似用途电子设备的安全要求 |
(Audio, video and similar electronic apparatus - Safety requirements.) |
| NF E62-508-1-2003 |
有7/24锥柄的铣刀轴.第1部分:尺寸 |
(Milling machine arbors with 7/24 tapers - Part 1 : dimensions.) |
| NF U10-211-2000 |
农用拖车.试验规程.第12部分:低温起动 |
(Agricultural tractors - Test procedures - Part 12 : low temperature starting.) |
| NF P94-150-1991 |
土壤.检验与试验.独立板桩在轴向压力下的静力试验 |
(SOILS : INVESTIGATION AND TESTING. STATIC COMPRESSION TEST ON SINGLE PILE.) |
| NF L24-025-1989 |
航天.突出头合金钢螺钉.1250MPa强度的等级和MJ螺纹.供应品的规范 |
(AEROSPACE. ALLOY STEEL PROTRUDING HEAD BOLTS WITH STRENGTH CLASSIFICATION 1250 MPA AND MJ THREADS. PROCUREMENT SPECIFICATION.) |
| NF C74-386-2000 |
医用电气设备.第2-23部分:经皮分压监护设备安全的特殊要求 |
(Medical electrical equipment - Part 2-23 : particular requirements for the safety of transcutaneous partial pressure monitoring equipment.) |
| NF C93-850-3-2002 |
光缆.第3部分:分规范.户外电缆 |
(Optical fibres cables - Part 3 : sectional specification - Outdoor cables.) |
| NF R11-415-1997 |
道路车辆.电动机起动器的电性能.试验方法和一般要求 |
(Road vehicles. Electrical performance of starter motors. Test methods and general requirements.) |
| NF C28-918-1998 |
磁性材料.第4部分:钢和铁直流电磁特性的测定方法 |
(Magnetic materials. Part 4 : methods of measurement of d.c. magnetic properties of iron and steel.) |
| NF V08-013-2002 |
食品和牲畜饲料的微生物学.沙门氏菌检测的水平方法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Salmonella spp.) |
| NF A89-440-2001 |
铜焊.程序认可 |
(Brazing - Procedure approval.) |
| NF P93-221-2002 |
工地设备.可调节的可伸缩钢支架的合用性 |
(Building site equipment - Fitness for use and implementation of adjustable telescopic steel props.) |
| NF S11-802-1-2000 |
光学和光学仪器.接触镜片.接触镜片材料的致癌性的测定.第1部分:琼酯用作细菌固体培养基中的支持物的免疫扩 |
(Optics and optical instruments - Contact lenses - Determination of cytotoxicity of contact lens material - Part 1 : agar overlay test and growth inhibition test.) |
| NF S76-060-2000 |
呼吸保护装置.开路循环自制压缩空气驱动装置.要求,试验,标记 |
(Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing, marking.) |
| NF L21-321-1993 |
航空航天系列.铆钉,固体,100级常规扩钻头,铝1050A,英寸系列(EN 2550) |
(AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD, IN ALUMINIUM 1050A,INCH BASED SERIES. (EUROPEAN STANDARD EN 2550).) |
| NF Z84-133-1-1995 |
寻呼系统(PS).欧洲无线电信息系统(ERMES).第1部分:一般特性 |
(Paging sytems (PS). European radio message system (ERMES). Part 1 : general aspects.) |
| NF S98-004-4-2000 |
消毒器试验和消毒方法用生物学系统.第4部分:辐射消毒器用专门系统 |
(Biological systems for testing sterilizers and sterilization processes - Part 4 : particular systems for use in irradiation sterilizers.) |
| NF K19-206-1999 |
银行业务.键控管理(零售).第6部分:键控管理计划 |
(Banking - Key management (retail) - Part 6 : key management schemes.) |
| NF T60-614-2002 |
闪点/无闪点测定.闭杯平衡法 |
(Determination of flash/no flash - Closed cup equilibrium method.) |
| NF C92-502-1998 |
数字音频广播系统.接收器数据接口(RDI)规范 |
(Digital Audio Broadcasting system. Specification of the Receiver Data interface (RDI).) |
| NF C96-013-4-2000 |
半导体器件的机械标准化.第4部分:半导体器件封装外形的编码系统和分类形式 |
(Mechanical standardization of semiconductor devices - Part 4 : coding system and classification into forms of package outlines for semiconductor device packages.) |
| NF C73-804/A1-2000 |
家用和类似用途电器的安全.第2-4部分:离心式脱水机的特殊要求 |
(Safety of household and similar electrical appliances - Part 2-4 : particular requirements for spin extractors.) |
| NF Z84-717-2000 |
电磁兼容性和无线电频谱管理(ERM).短程装置.模拟穿管无线电通信设备用电磁兼容性.移动式和便协式设备 |
(Electromagnetic compatibility and Radio spectrum Matters (ERM) - Electromagnetic Compatibility (EMC) for analogue cellular radio communications equipment - Mobile and portable equipment.) |
| NF S76-002-2002 |
呼吸保护装置.分类 |
(Respiratory protective devices - Classification.) |
| NF C47-344-2001 |
EN 60730系列范围内控制的常规试验.第1部分:一般要求 |
(Routine tests for controls within the scope of the EN 60730 series - Part 1 : general requirements.) |
| NF C30-2041-1991 |
C30-204-88的补充1 |
() |
| NF A04-191-1-1997 |
铸造.液体渗透检验.第1部分:砂模铸件、压铸件和低压模铸件 |
(Founding. Liquid penetrant inspection. Part 1 : sand, gravity die and low pressure die castings.) |
| NF E48-032-2002 |
液力传动.液压缸.验收试验 |
(Hydraulic fluid power - Cylinders - Acceptance tests.) |
| NF C13-102-2003 |
变电站.由HV公共配电系统(33kV以下)供电的外壳保护的简易预制变电站 |
(Consumer substations - Simplified prefabricated substations protected by enclosure, fed by a HV Public distribution system (up to 33 kV).) |
| NF S91-243-2002 |
牙科用金属材料.抗腐蚀试验方法 |
(Dental metallic materials - Corrosion test methods.) |
| NF T76-160-2001 |
胶粘剂.液体胶粘剂弹性行为的测定(弹性指数) |
(Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index).) |
| NF C63-423-1991 |
低压开关设备和控制设备装置.第3部分:可供非专业人员使用的低压开关设备和控制设备装置的特殊要求.配电盘 |
(Low-voltage switchgear and controlgear assemblies. Part 3 : particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use. Distribution boards.) |
| NF C93-340-3-2000 |
铁氧体磁心.表面不规则性限值指南.第3部分:ETD芯和E芯 |
(Ferrite cores - Guide on the limits of surface irregularities - Part 3 : ETD-cores and E-cores.) |
| NF A49-875-12-2000 |
钢管的无损检验.第12部分:检测表面缺陷用无缝和焊接锰钢管的磁粉检测 |
(Non-destructive testing of steel tubes - Part 12 : magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections.) |
| NF X00-002-2000 |
机械的安全.安全标准的制订和表达规则 |
(Safety of machinery - Rules for the drafting and presentation of safety standards.) |
| NF G91-112-2003 |
粘接拉链.纵向剪切强度的测定 |
(Touch and close fasteners - Determination of longitudinal shear strength.) |
| NF E25-711-2001 |
带断点牵引心轴和埋头的密铆和沉头铆钉.AIA/St |
(Closed and blind rivets with break pull mandrel and countersunk head - AIA/St.) |
| NF P18-650-4-2000 |
集料的机械和物理性能试验.第4部分:测定压缩烘干后填充料空隙 |
(Tests for mechanical and physical properties of aggregates - Part 4 : determination of the voids of dry compacted filler.) |
| NF U47-021-2002 |
动物健康分析方法.用血浆凝结试验探测布鲁氏菌病抗体 |
(Animal health analysis methods - Detection of antibodies against Brucellosis by the Serum Agglutination Test.) |
| NF U02-007-2002 |
农用机械.动力摊草机和搂草机.安全 |
(Agricultural machinery - Tedders and swath rakes with powered tools - Safety.) |
| NF Z66-015-1986 |
数据通信.基本型控制规程.代码独立的信息传送 |
(Data communication. Basic mode control procedures. Code independent information transfer.) |
| NF C77-210-1-2002 |
信息技术设备的安全性.第1部分:一般要求 |
(Information technology equipment - Safety - Part 1 : general requirements.) |
| NF P18-435-2001 |
硬化混凝土试验.第7部分:硬化混凝土密度 |
(Testing hardened concrete - Part 7 : density of hardened concrete.) |
| NF R10-113-1999 |
道路车辆.儿童保护系统.有儿童乘客的事故报告格式 |
(Road vehicles - Child restraint systems - Report form for accidents involving child passengers.) |
| NF C32-201-10-2001 |
额定电压小于等于450/750V的聚氯乙烯绝缘电缆.第10部分:可伸缩铅板 |
(Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 10 : extensible leads.) |
| NF E22-312-2003 |
滚珠丝杠用角面接触球轴承.系列.外形尺寸.分类和公差 |
(Angular contact ball bearings for ball screws - Series - Boundary dimensions - Classification, tolerance.) |
| NF X50-001-3-1-2000 |
动力站设备的征购指南.第3部分:锅炉.第1节:水管锅炉 |
(Guide for procurement of power station equipment - Part 3 : boilers - Section 1 : water tube boilers.) |
| NF E51-600-2003 |
建筑物通风.符号、术语和图形符号 |
(Ventilation for buildings - Symbols, terminology and graphical symbols.) |
| NF T57-204-1996 |
塑料管道系统.玻璃增强热固性塑料(GRP)管.耐长期内部压力性能的测定 |
(Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of long-term resistance to internal pressure.) |
| NF C18-431-1996 |
带电作业用滑动座架、电杆夹及附件 |
(Saddles, pole clamps (stick clamps) and accessories for live working.) |
| NF C74-306-1986 |
医用电气设备.超声仪.第2部分：特殊安全规则 |
(Medical electrical equipment. Ultrasonic therapy equipment. Part 2 : particular requirements for safety.) |
| NF M62-234-2002 |
核设施.屏蔽室的通风渗透性 |
(Nuclear facilities - Ventilation penetrations for shielded enclosures.) |
| NF C93-340-1-2000 |
铁氧体磁芯.表面缺陷极限指南.第1部分:总规范 |
(Ferrite cores - Guide on the limits of surface irregularities - Part 1 : general specification.) |
| NF C71-247-11-2002 |
灯控制设备.第2-11部分:用照明设备的各种电子回路的特殊要求 |
(Lamp controlgear - Part 2-11 : particular requirements for miscellaneous electronic circuits used with luminaires.) |
| NF F42-152-1-1999 |
铁路设备.固定安装.交流电开关的特殊要求.电压大于1KV的单机电路断路器 |
(Railways applications - Fixed installations - Particular requirements for a.c. switchgear - Part 1 : single-phase circuit breakers with Um above 1 kV.) |
| NF C93-400-6-5-2000 |
电子设备用机电元件.基本试验程序和测量方法.第6部分:动态应力试验.第5节:试验6e:随机振动 |
(Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6 : dynamic stress tests - Section 5 : test 6e : random vibration.) |
| NF L21-316-1993 |
航空航天系列.铆钉,固体.通用头,铝合金5056A,英寸系列(EN 2148) |
(AEROSPACES SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 5056A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2148).) |
| NF E82-002-1-1999 |
钢热模锻件.尺寸公差.第1部分:落锤锻造和垂直压力锻造 |
(Steel die forgings - Tolerances on dimensions - Part 1 : drop and vertical press forgings.) |
| NF Z82-884-2001 |
综合业务数字网(ISDN).禁止呼出-用户控制(OCB-UC)补充业务.业务描述 |
(Integrated Services Digital Network (ISDN) - Outgoing Call Barring-User Controlled (OCB-UC) supplementary service - Service description.) |
| NF S93-102/A1-1999 |
含水非肠道药配制用弹性部件 |
(Elastomeric parts for aqueous parenteral preparations.) |
| NF T42-050-1987 |
合成橡胶胶乳.调制 |
(Rubber latex, synthetic. Codification.) |
| NF C15-100-2002 |
低压电气设备 |
(Low-voltage electrical installations.) |
| NF X42-126-2000 |
生物技术.设备.取样和接种规程指南 |
(Biotechnology - Equipment - Guidance on sampling and inoculation procedures.) |
| NF S52-802-2003 |
敞篷车用帆布蓬.安全要求 |
(Caravan awnings - Safety requirements.) |
| NF T66-049-2000 |
沥青和沥青粘合剂.石蜡含量的测定.蒸馏法 |
(Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1 : method by distillation.) |
| NF C51-318-1/A1-2000 |
旋转电机.第18部分:绝缘系统的功能评定.第1节:一般导则 |
(Rotating electrical machines - Part 18 : functional evaluation of insulation systems - Section 1 : general guidelines.) |
| NF C93-910-4/A2-2001 |
光纤连接器接口.第4部分:SC型连接器系列 |
(Fibre optic connector interfaces - Part 4 : type SC connector family.) |
| NF X35-122-6-2000 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第6部分:工作环境指南 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Part 6 : guidance on the work environment.) |
| NF Z82-196-1-1996 |
综合业务数字网(ISDN).支持补充服务的总功能协议.数字用户信令系统No.1(DSS1)协议.第1部分:协议规范 |
(Integrated Services Digital Network (ISDN). Generic functional protocol for the support of supplementary services. Digital subscriber signalling system number one (DSS1) protocol. Part 1 : protocol specification.) |
| NF T47-305-1/A1-1999 |
NF EN 681-1-1996的修改件1 |
() |
| NF E22-203-1993 |
球端螺钉.第3部分:合格条件和合格试验? |
(Ball screws. Part 3 : acceptance conditions and acceptance tests.) |
| NF X50-913-2000 |
水疗法的创立.卫生控制.要求和推荐规程 |
(Hydropathic establishments (Spas) - Hygiene control - Requirements and recommendations.) |
| NF C26-304-2-2001 |
电绝缘材料.耐热性能.第4-2部分:老化炉.300℃以下使用的精确炉 |
(Electrical insulating materials - Thermal endurance properties - Part 4-2 : ageing ovens - Precision ovens for use up to 300 oC.) |
| NF C92-503-2001 |
DAB接受机的特性 |
(Characteristics of DAB receivers.) |
| NF S54-005-2-1999 |
家用转接设备.第2部分:试验方法 |
(Changing units for domestic use. Part 2 : test methods.) |
| NF C20-911-10-2000 |
着火危险试验.第11-10部分:试验火焰.50W水平和垂直火焰试验法 |
(Fire hazard testing - Part 11-10 : test flames - 50 W horizontal and vertical flame test methods.) |
| NF P99-460-1999 |
车辆停泊控制设备.付款和售票机.技术和功能要求 |
(Vehicle parking control equipment - Pay and display ticket machine - Technical and functional requirements.) |
| NF S92-051/A1-2002 |
实验室诊断医疗装置.微生物用培养基.培养基的性能标准 |
(In vitro diagnostic medical devices - Culture media for microbiology - Performance criteria for culture media.) |
| NF E37-504-1-1999 |
燃气轮机.废气排放.第1部分:测量和评价 |
(Gas turbines - Exhaust gas emission - Part 1 : measurement and evaluation.) |
| NF Z84-434-1-1999 |
无线电设备和系统(RES).终端系统配置用数字增强无线远程通信(DECT)和综合业务数字网(ISDN)之间的相互作用. |
(Radio Equipment and Systems (RES) - Digital Enhanced Cordless Telecommunications (DECT) and Integrated Services Digital Network (ISDN) interworking for end system configuration - Part 1 : interworking configuration.) |
| NF L13-140-2001 |
航空航天系列.银基合金AG-B14001(AgCu42Ni2).钎焊用填充金属.粉末或糊状物 |
(Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Powder or paste.) |
| NF Z81-177-1996 |
终端设备(te).可视图文.照相的相关语法 |
(Terminal equipment (te). Videotex. Photographic syntax.) |
| NF P14-203-2003 |
刮板材料和地面刮板.刮板材料.特性和要求 |
(Screed material and floor screeds - Screed materia - Properties and requirements.) |
| NF K20-006-2-2000 |
安全存储装置.耐火试验方法和分类.第2部分:数据空间和数据容器 |
(Secure storage units - Classification and methods of test for resistance to fire - Part 2 : data rooms and data containers.) |
| NF S52-200-2000 |
PETAQUE.最低质量特性 |
(Leisure Petanque bowls - Minimum quality characteristics.) |
| NF T90-101-2001 |
水质.氧的化学消耗量的测定(重铬酸钾法) |
(Water quality - Determination of chemical oxygen demand (COD).) |
| NF C18-406-1996 |
带电作业.电工用绝缘空心管 |
(Live working. Insulating hollows tubes for electrical purposes.) |
| NF C01-481-1998 |
电工词汇.第481章:原电池和电池组 |
(Electrotechnical vocabulary. Chapter 481 : primary cells and batteries.) |
| NF X43-246-4-2000 |
工作场所空气.有毒气体和蒸汽的直接浓缩测量和直接测量的电气装置.第4部分:选择,使用安装和维修指南 |
(Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4 : guide for selection, installation, use and mainten) |
| NF C63-113-2000 |
低压开关设备和控制设备.第4-3部分:接触器和电动机起动器.非电动机负载用交流半导体控制器和接触器 |
(Low-voltage switchgear and controlgear - Part 4-3 : contactors and motor-starters - A.C. semiconductor controllers and contactors for non-motor loads.) |
| NF C20-981-2001 |
火灾试验.第8-1部分:热的释放.一般指南 |
(Fire hazard testing - Part 8-1 : heat release - General guidance.) |
| NF Z84-720-2000 |
无线电设备和系统(RES).船载UHF通信系统和设备的技术特性和测量方法 |
(Radio Equipment and Systems (RES) - Technical characteristics and methods of measurement for UHF on-board communications systems and equipment.) |
| NF G35-023-2001 |
铺地织物.小脚轮椅试验 |
(Textile floor coverings - Castor chair test.) |
| NF C32-201-12/A1-2001 |
额定电压为450/750V及以下的聚氯乙烯绝缘电缆.第12部分:耐热柔性电缆(芯) |
(Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 12 : heat-resistant flexible cables (cords).) |
| NF X35-122-12-1999 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第12部分:信息表示法 |
(Ergonomic requirements for office work with visual display terminals (VDTs). Part 12 : presentation of information.) |
| NF T57-229-1997 |
塑料管道系统.玻璃纤维增强热固性塑料管.在化学环境下存放后相对弯曲蠕变系数的测定 |
(Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the relative flexural creep factor following exposure to a chemical environment.) |
| NF S91-217/A1-2000 |
牙科学.陶瓷义齿 |
(Dentistry - Ceramic denture teeth.) |
| NF P52-101-2000 |
泵.旋转动力泵.加热装置和家用热水装置用电效应不足200W的循环泵.要求、试验和标记 |
(Pumps - Rotodynamic pumps - Circulation pumps having an electrical effect not exceeding 200 W for heating installations and domestic hot water installations - Requirements, testing, marking.) |
| NF C93-732-2000 |
电气材料、互连结构和组件的试验方法.第2部分:互连结构用材料的试验方法 |
(Test methods for electrical materials, interconnection structures and assemblies - Part 2 : Test method for materials for interconnection structures.) |
| NF U03-025-4-2001 |
农业和林业用拖拉机和自驱动机械.驾驶室环境.第4部分:空气过滤元件试验方法 |
(Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Part 4 : air filter element test method.) |
| NF X06-041-2-1994 |
统计学应用.测量方法和测量结果的精确性.第2部分;标准测量方法的重复性和再现性测定的基本方法 |
(Application of statistics - Accuracy (trueness and precision) of measurement methods and results - Part 2 : basic method for the determination of repeatability and reproducibility of a standard measurement method.) |
| NF A84-000-2002 |
气焊设备.术语.气焊设备用术语 |
(Gas welding equipment - Terminology - Terms used for gas welding equipment.) |
| NF C20-924-1-1994 |
火灾试验.第2部分:试验方法.第4节:活页1:1kw标准混合型火焰试验和指南 |
(Fire hazard testing. Part 2 : test methods. Section 4 : sheet 1 : 1 kw nominal pre-mixed test flame and guidance.) |
| NF C01-221/A1-1999 |
电工词汇.第221章:磁性材料和部件 |
(Electrotechnical Vocabulary - Chapter 221 : magnetic materials and components.) |
| NF Z84-133-4-1995 |
寻呼系统(PS).欧洲无线电信息系统(ERMES).第4部分:空中接口规范 |
(Paging systems (PS). European radio message system (ERMES). Part 4 : air interface specification.) |
| NF Z82-201-1996 |
综合业务数字网(ISDN).呼叫转移无应答(cfnr)的补充服务.服务说明 |
(Integrated Services Digital Network (ISDN). Call forwarding non reply (cfnr) supplementary service. Service description.) |
| NF A36-205-3-2003 |
压力容器用扁平钢轧材.第3部分:经过正火处理的可焊细晶粒钢 |
(Flat products made of steels for pressure purposes - Part 3 : weldable fine grain steels, normalized.) |
| NF T94-256-1998 |
饮用水处理试剂.半燃的钒云母 |
(CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. HALF-BURNT DOLOMITE. (EUROPEAN STANDARD EN 1017).) |
| NF Z87-132-3-2003 |
环境工程(EE).电信设备输入处的电源接口.第3部分:由400V及以下的整流电源、交流电源或直流电源控制 |
(Environmental Engineering (EE) - Power supply interface at the input to telecommunications equipment - Part 3 : operated by rectified current source, alternating current source or direct current sourc) |
| NF L90-001-2-2002 |
太空项目管理.一般要求.第2部分:项目取消方式 |
(Space project management - General requirements - Part 2 : project breakdown structure.) |
| NF C32-302-2001 |
额定电压不超过750V矿物绝缘电缆.第3部分:使用指南 |
(Mineral insulated cables with a rated voltage not exceeding 750 V - Part 3 : guide to use.) |
| NF C73-216-2000 |
家用炉罩.性能测量方法 |
(Household range hoods - Methods for measuring performance.) |
| NF E25-115-2-2001 |
六角头螺钉.产品等级C |
(Hexagon head screws - Product grade C.) |
| NF C53-228-1989 |
半导体变流器.无间断供电用的开关 |
(Semiconductor convertors. Switches for uninterruptible power systems (vps switches).) |
| NF C73-175-1994 |
家用滚筒烘干机性能测量方法 |
(Method for measuring the performance of tumbler dryers for household use.) |
| NF C23-556-1992 |
可燃性气体检测和测量电气仪表.测量空气中沼气含量为100%及其以下的I组电气仪表的性能要求 |
(Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group I apparatus indicating up to 100 per cent (V/V) methane in air.) |
| NF E02-200-1994 |
光滑零件公差的检验.极限规.总则、定义、控制及使用 |
(Inspection of tolerances of plain workpieces. Limit gauges. General, definitions, control, use.) |
| NF H00-047-2003 |
包装.满装运输包装件和成组装运.水平振动试验 |
(Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests.) |
| NF V08-036-2003 |
食品和动物饲料的微生物学.低aw介质中酵母菌和霉菌计数的水平方法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of yeasts and moulds growing on low aw medium.) |
| NF Z86-194-1996 |
卫星地面站和系统(SES).非常小孔径终端(VSAT)系统对数据包接通的公共数据网络的互联. |
(Satellite earth stations and systems (ses). The interconnection of very small aperture terminal (vsat) systems to packet switched public data networks (pspdns).) |
| NF C91-006-2-2002 |
电磁兼容性.第6-2部分:总标准:工业环境抗扰性 |
(Electromagnetic compatibility (EMC) - Part 6-2 : generic standards - Immunity for industrial environments.) |
| NF J60-010-1996 |
小型船舶.海船推进发动机和装置.动力测量和说明 |
(Small craft. Marine propulsion engines and systems. Power measurements and declarations.) |
| NF X31-106-2002 |
土质.活性石灰石含量的测定 |
(Soil quality - Determination of active limestone content.) |
| NF E63-134-1992 |
压制工具.合成橡胶压力弹簧.第1部分:一般规范 |
(Tools for pressing. Elastomer pressure springs. Part 1 : general specification.) |
| NF A09-462-2002 |
无损检验.漏气试验.测量漏气仪器的选择指南 |
(Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage.) |
| NF A88-230-1997 |
焊接和联接工艺过程中的健康和安全.弧焊工艺用透明焊接隔层,板条和屏蔽 |
(Health and safety in welding and allied processes. Transparent welding curtains, strips and screens for arc welding processes.) |
| NF S71-502-1-2002 |
防止从高处跌落的个人防护设备.第1部分:包括刚性锚线的制导型防跌落装置 |
(Personal protective equipment against falls from a height - Part 1 : guided type fall arresters including a rigid anchor line.) |
| NF P61-608-1997 |
地砖胶粘剂.有粘结力的胶粘剂和灌浆的横向变形的测定 |
(Adhesives for tiles. Determination of transverse deformation for cementitious adhesives and grouts.) |
| NF D11-124-1988 |
卫生设备.搪瓷浴盆 |
(Sanitary appliances. Vitreous enamelled shower trays.) |
| NF C20-735-1987 |
气侯的基本试验和机械坚固性的基本试验.试验方法.Fda 试验.在宽带上的随机振动.重复性高 |
(Basic environmental testing procedures. Test methods. Test Fda : randim vibration wide band. Reproducibility.) |
| NF P85-519PR-1998 |
建筑结构.密封料.在可变温度下的粘附作用/粘聚性能的测定 |
(Building construction. Sealants. Determination of adhesion/cohesion properties at variable temperatures.) |
| NF E51-230-2002 |
石油和天然气工业.旋转型容积式压缩机.第1部分:加工压缩机(无油) |
(Petroleum and natural gas industries - Rotary-type positive displacement compressors - Part 1 : process compressors (oil-free).) |
| NF P15-900-4-2002 |
地区公共服务.与饮用水供应和废水有关的服务工作指南.第4部分:饮用水系统的管理 |
(Local public services - Guidelines for service activities relating to drinking water supply and sewerage - Part 4 : management of drinking water system.) |
| NF E51-200-1981 |
压缩机,气压工具和机械.常用词汇 |
(Compressors, pneumatic tools and machines. General vocabulary.) |
| NF X43-245-1999 |
工作场所空气.体积流速大于51/min的化学试剂取样用泵.要求和试验方法 |
(Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min - Requirements and test methods.) |
| NF M87-243-2-2003 |
石油和天然气工业.玻璃纤维增强塑料管系.第2部分:合格鉴定和制造 |
(Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2 : qualification and manufacture.) |
| NF K19-205-1999 |
银行业务.键控管理(零售).第5部分:使用公共键控密码的键盘寿命周期 |
(Banking - Key management (retail) - Part 5 : key life for public key crysptosystems.) |
| NF Z83-515-1996 |
数字蜂窝状电信系统(第2阶段).呼叫转移(cf)补充服务.第1阶段(GSM 02.82) |
(Digital cellular telecommunications system (phase 2). Call forwarding (cf) supplementary service. Stage 1 (GSM 02.82).) |
| NF M08-019-1996 |
轻质碳氢化合物制冷液.船上薄膜式罐和柱型罐的标定.物理测量法 |
(Refrigerated light hydrocarbon fluids. Calibration of membrane tanks and independent prismatic tanks in ships. Physical measurement.) |
| NF R99-030-2004 |
轮胎气门嘴螺纹 |
(Tyre valve threads.) |
| NF U44-551-2002 |
生长媒质..名称、规范和标志 |
(Growth media - Designations, specifications, marking.) |
| NF T47-201-2002 |
橡胶,塑料软管和软管组件.尺寸的测量方法 |
(Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions.) |
| NF Z83-563-1997 |
蜂窝式数字通信系统(阶段2).移动站上数据和远程信息处理业务用无线电链接协议(RLP).基础站系统(MS-BSS)接口 |
() |
| NF Z86-468-1997 |
数字视频广播(DVB).DVB系统中的服务信息(SI)规范 |
(Digital Video Broadcasting (DVB). Specification for Service Information (SI) in DVB systems.) |
| NF T30-020-2-2001 |
涂料和清漆.密度的测定.第2部分:潜体法 |
(Paints and varnishes - Determination of density - Part 2 : immersed body (plummet) method.) |
| NF S96-202-1997 |
尿收集袋.第2部分:要求和试验方法 |
(Urine collection bags. Part 2 : requirements and test methods.) |
| NF C52-216-5/A1-2003 |
电力变压器和电抗器的配件.第5部分:液位计、压力器具和流量指示器 |
(Power transformer and reactor fittings - Part 5 : liquid level, pressure devices and flow indicators.) |
| NF Z83-510-1996 |
蜂窝式数字通信系统(阶段2).收费通知描述(CAI)(GSM02.24) |
(Digital cellular telecommunications system (phase 2). Description of charge advice information (CAI) (GSM 02.24).) |
| NF C92-260-2002 |
DVB-IRD接口 |
(Interfaces for DVB-IRD.) |
| NF Z83-580-4-1998 |
蜂窝式数字通信系统(阶段2).全速语音服务.第4部分:全速语音通信信道的可接受噪音(GSM 06.12) |
(Digital cellular telecommunications system (Phase 2). Full rate speech. Part 4 : confort noise aspect for full rate speech traffic channels (GSM 06.12).) |
| NF P50-531-2-2002 |
太阳热收集系统和元件.工厂制造系统.第2部分:试验方法 |
(Thermal solar systems and components - Factory made systems - Part 2 : test methods.) |
| NF T54-918-1-1999 |
建筑物内污物和污水排放(低、高温)用塑料管道系统.苯乙烯共聚物混合物(SAN+PVC).第1部分:管道,配件和系统规 |
(Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN + PVC) - Part 1 : specifications for pipes, fittings and the system.) |
| NF J95-023-1993 |
游艇.遥控转向系统 |
(Small craft. Remote steering systems.) |
| NF S61-992-2003 |
火灾探测和火灾警报系统.第12部分:烟雾探测器.利用光学光束的线性探测器 |
(Fire detection and fire alarm systems - Part 12 : smoke detectors - Line detectors using an optical light beam.) |
| NF P84-136-2002 |
防水软板.屋面防水用沥青、塑料和橡胶薄板.防冰雹的测定 |
(Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of hail resistance.) |
| NF C93-406-4-100-2002 |
电子设备连接器.第4-100部分:已评定质量的印制板连接器.印制电路板和底板用的栅极为2,5mm的两段连接器组件 |
(Connectors for electronic equipment - Part 4-100 : printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and b) |
| NF A49-875-7-1996 |
钢管的无损试验.第7部分:纵向缺陷探测用无缝钢管和焊接(除埋弧焊外)钢管的自动全周边超声波试验 |
(Non destructive testing of steel tubes. Part 7 : automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections.) |
| NF E25-023-1992 |
紧固件.螺栓和螺钉的自由尺寸孔 |
(Fasteners. Clearance hole for bolts and screws.) |
| NF T57-220-1996 |
塑料管道系统.玻璃纤维增强热固性塑料(GRP)管.测定指定环初始硬度 |
(Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of initial specific ring stiffness.) |
| NF E60-111-2-1998 |
带升降工作台的铣床的试验条件.精度试验.第2部分:卧式机床 |
(Test conditions for milling machines with table of variable height. Testing of the accuracy. Part 2 : machines with horizontal spindle.) |
| NF C52-216-2/A1-2003 |
电力变压器和电抗器配件.第2部分:带储油箱的液浸式变压器和电抗器用气动和油动继电器 |
(Power transformer and reactor fittings - Part 2 : gas and oil actuated relay for liquid immersed transformers and reactors with conservator.) |
| NF Z82-210-1-1997 |
综合服务数字网络(ISDN).免费电话(FPH)辅助服务.数字用户信号系统第1号协议(DSS1).第1部分:协议规范 |
(Integrated Services Digital Network (ISDN). Freephone (FPH) supplementary service. Digital substriber Signalling System n o one (DSS) protocol. Part 1 : protocol specification.) |
| NF C20-001-1995 |
环境条件的分类.第1部分:环境参数及其严密性 |
(Classification of environmental conditions. Part 1 : environmental parameters and their severities.) |
| NF C20-790-4-3-2002 |
静电学.第4-3部分:特殊应用的标准试验方法.鞋类 |
(Electrostatics - Part 4-3 : standard test methods for specific applications - Footwear.) |
| NF D25-101-3-2003 |
与食品接触的材料和物品.塑料.第3部分:全浸渍在液态食品中塑料全淅出量的试验方法 |
(Materials and articles in contact with foodstuffs - Plastics - Part 3 : test methods for overall migration into aqueous food simulants by total immersion.) |
| NF X08-002-1983 |
颜色的有限收集.ＣＣＲ颜料的名称和目录.副标准 |
(Limited collection of colours. Designation and catalogue of ccr colours. Secondary standards.) |
| NF Z83-549-1997 |
数字蜂窝通信系统(第2阶段).非结构增补数据(USSD).第2阶段(GSM 03.90) |
(Digital cellular telecommunications system (Phase 2). Unstructured Supplementary Service Data (USSD). Stage 2 (GSM 03.90).) |
| NF J82-956-1996 |
内河航运船只.污水排放用连接件 |
(Inland navigation vessels. Connections for the discharge of waste water.) |
| NF C97-102-4-2000 |
使用8mm磁带的螺旋扫描盒式录像带系统(8mm录像).第4部分:视频二级编码(VSC) |
(Helical-scan video tape cassette system using 8 mm magnetic tape (8 mm video) - Part 4 : video subcode (VSC).) |
| NF T40-107-1987 |
橡胶配方配合剂.缩略语 |
(Rubber compounding ingredients. Abbreviations.) |
| NF X50-122-2-1994 |
质量管理和质量系统要素.第2部分:服务导则 |
(Quality management and quality system elements. Part 2 : guidelines for services.) |
| NF C52-216-1-2002 |
电力变压器和反应堆配件.第1部分:总论 |
(Power transformer and reactor fittings - Part 1 : general.) |
| NF E60-135-1996 |
立式单轴转塔坐标钻床的试验条件.精度试验 |
(Test conditions for turret and single spindle co-ordinate drilling machines with vertical spindle. Testing of the accuracy.) |
| NF E65-405-2002 |
地板切割机.安全性 |
(Floor cutting-off machines - Safety.) |
| NF P16-321-5/A1-1999 |
1994年的NF EN 295-5 标准的修改件1 |
() |
| NF M07-051-1999 |
石油产品.燃气轮机燃料的热氧化稳定性的测定.JFTOT法 |
(Petroleum products - Determination of thermal oxidation stability of gas turbine fuels - JFTOT method.) |
| NF T57-214-3-1996 |
压力下地下排水系统用塑料管道系统.不饱和聚酯树脂基玻璃增强热固塑料.第3部分:配件 |
(Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (grp) based on unsaturated polyester resin (up). Part 3 : fittings.) |
| NF E60-133-1-1996 |
箱型立式钻床的试验条件.精度试验.第1部分:几何试验 |
(Test conditions for box type vertical drilling machines. Testing of the accuracy. Part 1 : geometrical tests.) |
| NF A50-620-2004 |
铝及铝合金.通用冷拉制圆盘管.规范 |
(Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification.) |
| NF S52-105-2003 |
滑雪道.保护设备用垫子的生产 |
(Ski runs - Manufacture of mattresses for protection devices.) |
| NF H96-333-2000 |
工业卡车的安全.10000KG以上的自推式卡车 |
(Safety of industrial trucks - Self propelled trucks over 10 000 kg capacity.) |
| NF C26-113-2-1995 |
云母基绝缘材料规范.第3部分:单一材料规范.第2活页:云母纸 |
(Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 2 : mica paper.) |
| NF A91-222-2001 |
热喷涂.热喷涂配合.任务和责任 |
(Thermal spraying - Thermal spray coordination - Tasks and responsabilities.) |
| NF C54-119-1996 |
额定电压在1000V以下(含1000V)交流系统用非自恢复型并联功率电容器.第2部分:老化试验和破坏试验 |
(Shunt power capacitors of the non-self healing type for A.C. Systems having a rated voltage up to and including 1 kv. Part 2 : ageing test and destruction test.) |
| NF C92-201-5-1994 |
12GHz频带卫星广播接收机的测量方法.第5部分:MAC/包系统的译码器单元的测量方法 |
(Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band. Part 5 : electrical measurement on decoder units for mac/packet systems.) |
| NF E74-351-2002 |
螺钉和螺母用装配工具.一字槽头螺钉用旋具.第2部分:手工操作旋具的一般要求、刀刃长度和标记 |
(Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2 : general requirements, lengths of blades and marking of hand-operated screwdrivers.) |
| NF J82-955-1996 |
内河航运船只.油残渣排放用连接件 |
(Inland navigation vessels. Connections for the discharge of oily mixture.) |
| NF U42-605-2002 |
慢速释放肥料.测定营养释放速率.覆盖肥料法 |
(Slow-release fertilizers - Determination of the rate of release of nutrients - Method for coated fertilizers.) |
| NF R14-332-1986 |
道路车辆.摩托车闪光器的电特性 |
(Road vehicles. Motor vehicles flasher units. Electrical characteristics.) |
| NF A89-500-1997 |
焊缝的无损检验.金属材料用一般规则 |
(Non-destructive examination of welds. General rules for metallic materials.) |
| NF X06-041-1-1994 |
统计学应用.测量方法和测量结果的精确性.第1部分;一般原理和定义 |
(Application of statistics. Accuracy (trueness and precision) of measurement methods and results. Part 1 : general principles and definitions.) |
| NF E22-335-2002 |
滚动轴承.径向轴承.公差 |
(Rolling bearings - Radial bearings - Tolerances.) |
| NF T60-613-2003 |
石油产品和润滑油.金属作业用水流质体.评估生物耐性 |
(Petroleum products and lubricants - Aqueous fluids for metal working - Evaluation of the biological resistance.) |
| NF R41-101-2003 |
商用道路车辆.牵引车和拖车间的机械连接件.环形42 mm x 68 mm的拉杆眼用联接装置 |
(Commercial road vehicles - Mechanical connections between towing vehicles and trailers - Coupling devices for toroidal drawbar eye of 42 mm x 68 mm.) |
| NF E64-601-2-1998 |
木工机械的安全.带回转刀具的单边造型机.第2部分:单轴人工加料/组合加料手动靠模铣床 |
(Safety of woodworking machines - One side moulding machines with rotating tool - Part 2 : single spindle handfed/integrated fed routing machines.) |
| NF Z86-127-2002 |
固定无线电系统.点对点设备.频带约30 MHz信道空间的载SDH 信号(达到2x STM-1)和使用共极排列或共信道双极(C |
(Fixed radio systems - Point-to-point equipment - High capacity digital radio systems carrying SDH signals (up to 2 x STM-1) in frequency bands with about 30 MHz channel spacing and using co-polar arra) |
| NF M88-718-2003 |
汽车用液化石油汽的化学成分.容器 |
(Automotive LPG components - Containers.) |
| NF L13-209-2001 |
航空航天系列.钛合金TI-W640001.焊接用填充金属 |
(Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding.) |
| NF C73-859-2000 |
家用和类似用途电器的安全.第2-59部分:灭虫器的特殊要求 |
(Safety of household and similar electrical appliances - Part 2-59 : particular requirements for insect killers.) |
| NF T66-008-2000 |
沥青和沥青粘合剂.软化点的测定.圆环法和压球法 |
(Bitumen and bituminous binders - Determination of softening point - Ring and Ball method.) |
| NF C20-015/A1-1999 |
NF EN 50102-1995的修改件A1 |
() |
| NF L13-118-2001 |
航空航天系列.镍基合金NI-B21001(NiCr15B4).钎焊用充填金属.硼化箔 |
(Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Borided foil.) |
| NF F67-261-2000 |
铁路设备.电气设备规范 |
(Railway applications - Mounting of electronic equipment.) |
| NF D36-390/A1-1999 |
NF EN 1854-1997的修改件1 |
() |
| NF E11-107-2002 |
产品几何量技术规范(GPS).测量学范围 |
(Geometrical Product Specification (GPS) - Spheres for metrology.) |
| NF A04-307-2002 |
无损检验.钢棒的超声检验 |
(Non destructive testing - Ultrasonic testing of steel bars.) |
| NF T47-288-1997 |
橡胶软管和软管组件.液压装置用小型金属丝编织物增强.规范 |
(Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification.) |
| NF E22-337-2-2002 |
滚动轴承.公差.第2部分:测量和校验原理和方法 |
(Rolling bearings - Tolerances - Part 2 : measuring and gauging principles and methods.) |
| NF Z83-520-1996 |
欧洲数字蜂窝状电信系统(第2阶段).呼叫阻挡(CB)补充服务.第1阶段(GSM 02.88) |
(European digital cellular telecommunications system (phase 2). Call barring (CB) supplementary services. Stage 1 (GSM 02.88).) |
| NF U15-460/A2-1997 |
NF EN 774-1996的修改件2 |
() |
| NF S10-015-1991 |
玻璃和玻璃陶瓷.努氏硬度试验D |
(Glass and glass ceramics. Knoop hardness test D.) |
| NF E37-211-5-1997 |
往复式内燃机.废气排放测量.第5部分:试验燃料 |
(Reciprocating internal combustion engines. Exhaust emission measurement. Part 5 : test fuels.) |
| NF S91-113-1999 |
局部麻醉牙管壳 |
(Dental cartridges for local anaesthetics.) |
| NF L13-212-2001 |
航空航天系列.耐热合金NI-WH3901(NiCr16Mo15).焊接用填充金属 |
(Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding.) |
| NF A51-205-2002 |
铜及铜合金.热浸镀锡带 |
(Copper and copper alloys - Hot-dip tinned strip.) |
| NF T47-135-1997 |
橡胶,塑料软管和软管组件.电阻的测定 |
(Rubber and plastics hoses and hose assemblies. Determination of electrical resistance.) |
| NF T47-252-1997 |
压缩空气用纺织材料增强的橡胶软管规范 |
(Rubber hose, textile-reinforced, for compressed air. Specification.) |
| NF T57-218-1996 |
塑料管道系统.玻璃纤维增强热固塑料(GFK).检验原有环挠曲的试验方法 |
(Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Test method to prove the resistance to initial ring deflection.) |
| NF E04-505-3-2000 |
技术产品文献.字体.第3部分:希腊字母 |
(Technical product documentation - Lettering - Part 3 : greek alphabet.) |
| NF E90-321-3-1997 |
便携式手提动力工具.第321部分:手柄振动测量.第3节:模具研模机 |
(Hand-held portable power tools. Measurement of vibrations at the handle. Part 13 : die grinders.) |
| NF J95-024-1993 |
游艇.电动舱底泵 |
(Small craft. Electrically operated bilge-pumps.) |
| NF T70-857-1-2004 |
民用爆炸物.第1部分:术语 |
(Explosives for civil uses - Part 1 : terminology.) |
| NF L92-312-1966 |
飞行器系留用移动式挂环.(RECH.) |
(PORTABLE RINGS FOR MOORING AIRCRAFT. (RECH.).) |
| NF R18-005-1980 |
特种车辆.尺寸规则 |
(DIMENSIONNAL CODES FOR PASSENGER CARS.) |
| NF A03-660-1985 |
钢制产品.用封闭冲压坯冲压带材或３０mm－９０mm宽带钢的试验 |
(STEEL PRODUCTS. CUPPING TEST WITH CLAMPED BLANKS FOR STRIP. WIDTH RANGE : FROM 30 MM TO 90 MM EXCLUDED.) |
| NF C47-73911-1997 |
NF C47-739-95的补充件11 |
() |
| NF T76-407-2000 |
胶粘剂.水硬地面平整和/或找平填料的试验方法.流动性能的测定 |
(Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics.) |
| NF F42-152-2-1999 |
铁路设备.固定安装.交流电开关的特殊要求.单相断路器,接地开关及与高于1KV相接的开关 |
(Railways applications - Fixed installations - Particular requirements for a.c. switchgear - Part 2 : single-phase disconnectors, earthing switches and switches with Um above 1 kV.) |
| NF S90-351-2003 |
医疗保健设施.清洁室和相关受控环境.空气中污物的控制要求 |
(Health care establishments - Cleanrooms and associated controlled environments - Requirements for the control of airbone contamination.) |
| NF E01-201-7-2002 |
压力设备.第7部分:不用火加热的压力设备的安全系统 |
(Pressure equipment - Part 7 : safety systems for unfired pressure equipment.) |
| NF E04-703-3-1989 |
书写和符号用的模板.第3部分:符合ISO 9175-1的管状笔尖绘图笔用模型槽宽度 |
(Templates for lettering and symbols. Part 3 : slot widths for technical pens with tubular tips in accordance with iso 9175-1.) |
| NF V04-214-2001 |
牛奶.脂肪含量的测定.重量分析法(基准方法) |
(Milk - Determination of fat content - Gravimetric method (Reference method).) |
| NF Z84-444-1999 |
数字增强无线远程通信(DECT).通用存取提问文件(GAP) |
(Digital Enhanced Cordless Telecommunications (DECT) - Generic Access Profile (GAP).) |
| NF Z84-471-1999 |
无线设备和系统(RES).地面流动服务.在共用频道上数据的传送用无线电设备的相应技术特性,职业法规和入口协议 |
(Radio Equipment and Systems (RES) - Land mobile service - Access protocol, occupation rules and corresponding technical characteristics of radio equipment for the transmission of data on shared channels.) |
| NF S91-139-1997 |
牙周刮匙、牙刮除器和牙钻孔器.第3部分:牙刮除器.H型 |
(Periodontal curettes, dental scalers and excavators. Part 3 : dental scalers. H-type.) |
| NF T54-062-1-1999 |
建筑物内污物和污水排放(低、高温)用塑料管道系统.聚丙烯(PP).第1部分:管道、配件和系统规范 |
(Plastics piping systems for soils and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1 : specifications for pipes, fittings and the system.) |
| NF X44-052-2002 |
固定源的排放物.灰尘大比例物质浓度的测定.人工重量分析法 |
(Stationary source emissions - Determination of high range mass concentration of dust - Manual gravimetric method.) |
| NF H90-215-2000 |
交换体.编码识别和标记 |
(Swap bodies - Coding, identification and marking.) |
| NF E90-510-1996 |
机械振动和冲击.在建筑物中敏感设备冲击和振动效应的测量和评定 |
(Mechanical vibration and shock. Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings.) |
| NF P18-441-2000 |
硬化混凝土试验.第4部分:抗压强度.试验机规范 |
(Testing hardened concrete - Part 4 : compressive strength - Specification for testing machines.) |
| NF Z85-462-2-1-2002 |
传输和多路转换(TM).同步网的一般要求.第2-1部分:基于网络的同步网结构 |
(Transmission and Multiplexing (TM) - Generic requirements for synchronization networks - Part 2-1 : synchronization network architecture based on networks.) |
| NF T60-100-1996 |
石油产品.透明和不透明液体.运动粘度的测定和动力粘性的计算 |
(Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity.) |
| NF S60-212-2001 |
灭火介质.泡沫浓缩.第2部分:不与水混溶的液体表面应用的媒介物高膨胀泡沫浓缩的规范 |
(Fire extinguishing media - Foam concentrates - Part 2 : specification for high expansion foam concentrates for surface application to water-immiscible liquids.) |
| NF E17-302-2002 |
煤气表.旋转位移式煤气表 |
(Gas meters - Rotary displacement gas meters.) |
| NF E84-006-1998 |
金属网用钢丝和钢丝产品.第3部分:发动机用六角型钢线螺母 |
(Steel wire and wire products for fences. Part 3: hexagonal steel wire netting for engineering purposes.) |
| NF V08-106-2002 |
活贝类中大肠杆菌的推定计数.使用直接阻抗测量的间接技术 |
(Enumeration of presumptive Escherichia coli in live shellfish - Indirect technique using direct impedance measurement.) |
| NF L31-221-1985 |
航空和航天系列.机身用轴承、双排滚珠钢制耐腐蚀轴承.尺寸系列:2.尺寸和负荷 |
(Aerospace series. Bearing, airframe rolling, double row self-aligning ball bearings, in steel, diameter series 2, dimensions and loads.) |
| NF S97-530-2002 |
医疗信息学.有关输血的信息.通讯和数据模型 |
(Medical informatics - Messages concerning blood transfusion - Communication and data model.) |
| NF S54-024-2003 |
护理儿童用品.摇篮 |
(Child care articles - Reclined cradles.) |
| NF P94-425-2002 |
岩石.杨氏“模量和泊松比的测定 |
(Rock - Determination of the Young modulus and the Poisson ratio.) |
| NF E51-240-1991 |
冷冻液用电动压缩机.容积式密闭电动压缩机组和可维修密闭电动压缩机组.性能说明 |
(REFRIGERANT MOTOR-COMPRESSORS. SEALED REFRIGERANT MOTO-COMPRESSORS AND ACCESSIBLE SEALED REFRIGERANT DISPLACEMENT MOTOR-COMPRESSORS. PRESENTATION OF PERFORMANCE.) |
| NF P82-005-2002 |
电梯维护.维护简介规则 |
(Maintenance for lifts and escalators - Rules for maintenance instructions.) |
| NF P85-700-2003 |
勾缝产品.鉴定试验.表观密度 |
(Jointing products - Identification tests - Apparent density.) |
| NF F13-209-1989 |
铁路车辆.非机械通风的电采暖散热器 |
(RAILWAY ROLLING STOCK. ELECTRIC RADIATORS,WITHOUT MECHANICAL VENTILATION.) |
| NF Z85-507-1-2001 |
综合业务数字网络(ISDN).信令系统No.7.运行部分、维护部分和管理部分(OMAP).第1部分:协议规范 |
(Integrated Services Digital Network (ISDN) - Signalling system No. 7 - Operations, Maintenance and Administration Part (OMAP) - Part 1 : protocol specification.) |
| NF R83-001-1980 |
硬塑料.可选择性 |
(RIGID PLASTICS. SELECTION CRITERIA.) |
| NF Z86-722-2000 |
卫星地面站和系统(SES).可以用小比特速率进行数据通信(LBRDCs)和使用在1 GHz下工作的LEO卫星站的MES用网络 |
(Satellite Earth Stations and Systems (SES) - Network Control Facilities for MES providing Low Bit Rate Data Communications (LBRDCs) using Low Earth Orbiting (LEO) satellites operating below 1 GHz.) |
| NF S98-004-6-2000 |
消毒器试验和消毒方法用生物学系统.第6部分:干热消毒器用专门系统 |
(Biological systems for testing sterilizers and sterilization processes - Part 6 : particular systems for use in dry heat sterilizers.) |
| NF A03-659-2001 |
钢铁.钢薄板和板材拉伸应力硬化指数n的测定方法 |
(Iron and steel - Method of determination of the tensile strain hardening exponent n of steel sheet and plate.) |
| NF A50-922-2000 |
铝及铝合金.锻造坯料.第3部分:尺寸和形状公差 |
(Aluminium and aluminium alloys - Wrought forging stock - Part 3 : tolerances on dimensions and form.) |
| NF Z83-529-1996 |
数字蜂窝状电信系统(2).补充服务的技术实现(GSM 03.11) |
(Digital cellular telecommunications system (phase 2). Technical realization of supplementary services (GSM 03.11).) |
| NF L23-321-2000 |
航空航天.卡簧铜丝 |
(Aerospace - Snapwire, in copper.) |
| NF C96-031-2-1990 |
IEC 821 VME 总线.第2部分:1～4字节数据微处理机系统总线 |
(IEC bus 821 VME. Microprocessor system bus for 1 to 4 byte data. Part 2.) |
| NF S62-303-2002 |
烟和热控制系统.第3部分:动力烟和热废气口用通风机规范 |
(Smoke and heat control systems - Part 3 : specification for powered smoke and heat exhaust ventilators.) |
| NF C93-547-3-1-2000 |
液晶和固态显示器件.第3-1部分:液晶显示屏(LCD).空白详细规范 |
(Liquid crystal and solid-state display devices - Part 3-1 : liquid crystal display (LCD) cells - Blank detail specification.) |
| NF S74-509-4-2000 |
手提式链锯使用者防护服.第4部分:使用链锯者防护手套的试验方法 |
(Protective clothing for users of hand-held chainsaws - Part 4 : ttest methods for chainsaw protective gloves.) |
| NF T70-365-2003 |
国防用高能材料.物理-化学分析和性能.高能材料和密封衬里、抑制剂和热保护层之间粘结的特征.剪切试验 |
(Energetic materials for defense - Physical-chemical analysis and properties - Characterisation of the bonding between energetic materials and liners, inhibitors and thermal protections, shear.) |
| NF D36-390-1997 |
燃烧器和燃烧器具用压感器件 |
(Pressure sensing devices for gas burners and gas burning appliances.) |
| NF C64-450-1987 |
充气式高压开关及控制设备用铝合金浇铸外壳 |
(Cast aluminium alloy enclosures for gas-filled high-voltage swichtgear and controlgear.) |
| NF G62-409/A1-2002 |
鞋靴.鞋内底、衬和内垫的试验方法.耐汗性 |
(Footwear - Test methods for insoles, lining and insocks - Perspiration resistance.) |
| NF R13-008-1-1999 |
道路车辆.摩托车电磁兼容性试验程序.第1部分:定义和总则 |
(Road vehicles - Electromagnetic compatibility test procedure of motor vehicles - Part 1 : definitions and generalities.) |
| NF C34-125-2001 |
架空线路用导线.圆线共轴布线多股导线 |
(Conductors for overhead lines - Round wire concentric lay stranded conductors.) |
| NF M60-610-1-2002 |
辐射防护.放射生物测定的性能标准.第1部分:一般原则 |
(Radiation protection - Performance criteria for radiobioassay - Part 1 : general principles.) |
| NF A36-702-2002 |
包装用钢.用于接触人和动物消耗的食品、饲料、产品和饮料的扁钢制品.涂锡钢(马口铁) |
(Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Tin coated steel (tinplate).) |
| NF Z41-100-1999 |
信息和文献工作.国际标准连续出版物编号(ISSN) |
(Information and documentation - International Standard Serial Number (ISSN).) |
| NF E04-505-2-2000 |
技术产品文献.字体.第2部分:拉丁字母、数字和标记 |
(Technical product documentation - Lettering - Part 2 : latin alphabet, numerals and marks.) |
| NF Z82-179-1996 |
综合业务数字网(ISDN).费用通知:呼叫中收费信息(AOC-D)的补充服务.服务说明 |
(Integrated Services Digital Network (ISDN). Advice of charge : charging information during the call (AOC-D) supplementary service. Service description.) |
| NF T54-081-1987 |
塑料.饮用水供给用未增塑聚氯乙烯管(PVC-U).作为杂质的镉和汞的可萃取性 |
(Plastics. Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply. Extractability of cadmium and mercury occurring as impurities.) |
| NF E25-650-2-1999 |
自攻螺钉螺纹 |
(Tapping screw thread.) |
| NF T54-016-5-1999 |
供水用塑料管道系统.未增塑聚氯乙烯(PVC-U).第5部分:系统使用的适用性 |
(Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5 : fitness for purpose of the system.) |
| NF C93-540-2-30-2002 |
通信电缆.第2-30部分:一般设计规则和制造.四氟乙烯和六氟乙烯共聚物(FEP)绝缘和铠装 |
(Communication cables - Part 2-30 : common design rules and construction - Poly(tetrafluoroethylene-Hexafluoropropylene) (FEP) insulation and sheathing.) |
| NF E31-501/A1-2002 |
未达到70KW净热输入的空间加热用的家用燃气驱动对流空气加热器,无风扇协助传输可燃空气和/或可燃产品 |
(Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products.) |
| NF Z86-421-1996 |
电视、声音和数据服务用数字广播系统.11/12 GHz卫星服务结构、代码和调解 |
(Digital broadcasting systems for television, sound and data services. Framing structure, channel coding and modulation for 11/12 GHz satellite services.) |
| NF S91-138-1997 |
牙周刮匙、牙刮除器和牙钻孔器.第2部分:牙周刮匙.GR型 |
(Periodontal curettes, dental scalers and excavators. Part 2 : periodontal curettes. Gr-type.) |
| NF S74-548-2001 |
非专业用高清晰度组件.试验方法和要求 |
(Visibility accessories for non-professional use - Test methods and requirements.) |
| NF C71-000/A15-2002 |
灯具.第1部分:一般要求和试验 |
(Luminaires - Part 1 : general requirements and tests.) |
| NF Z15-531-1996 |
识别卡系统.电信设备.集成电路卡交费电话 |
(Identification card systems. Telecommunication applications. Integrated circuit(s) card payphone.) |
| NF E66-371-1966 |
高速钢合金车床刀具.镗孔端面刀具 |
(TURNING TOOLS WITH SPEED STEEL INSERTS. INTERNAL SIDE TURNING TOOLS.) |
| NF E29-735-2004 |
移动式气瓶.蓄电池动力车.设计、生产、标识和检验 |
(Transportable gas cylinders - Battery-vehicles - Design, manufacture, identification and testing.) |
| NF P92-130-1-2000 |
服务设施的防火试验.第1部分:管 |
(Fire resistance tests for service installations - Part 1 : ducts.) |
| NF H31-341-2000 |
钢桶.最小总容量210升活盖桶 |
(Steel drums - Removable (open head) drums with a minimum total capacity of 210 l.) |
| NF V37-037-2004 |
烟草.还原物质含量的测定.连续流分析法 |
(Tobacco - Determination of the content of reducing substances - Continuous-flow analysis method.) |
| NF R81-008-1980 |
微孔塑料.可选择性 |
(CELLULAR PLASTICS. SELECTION CRITERIA.) |
| NF Z83-533-1996 |
蜂窝式数字通信系统(阶段2).操作员决定的用户锁定区域的技术实现(GSM 03.15) |
(Digital cellular telecommunications system (phase 2). Technical realization of operator determined barring (GSM 03.15).) |
| NF P24-505-2000 |
门窗制造用未增塑聚氯乙烯型材.焊接弯头和T接头强度的测定 |
(Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the strength of welded corners and T-joints.) |
| NF F00-126-2000 |
铁路设施.可靠性、可用性、可维修性和安全性(RAMS)的规范和说明 |
(Railways applications - The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS).) |
| NF E25-109-2001 |
平头内六角螺钉 |
(Hexalobular socket pan head screws.) |
| NF C68-302/A1-2001 |
电气装置用米制电缆密封圈 |
(Metric cable glands for electrical installations.) |
| NF T42-017-1987 |
天然橡胶胶乳浓缩物.硼酸含量的测定 |
(Natural rubber latex concentrate. Determination of boric acid content.) |
| NF P94-411-2002 |
岩石.实验室中测定超声波速度 |
(Rock - Determination of the ultrasonic waves velocity in laboratory - Transmission method.) |
| NF A00-500-3-1997 |
铸造.交货技术条件.第3部分:铸铁的补充要求 |
(Founding. Technical conditions of delivery. Part 3 : additional requirements for iron castings.) |
| NF C73-888-2000 |
家用和类似用途电器的安全.第2-88部分:加热、通风或空气调节系统用增湿器的特殊要求 |
(Safety of household and similar electrical appliances - Part 2-88 : particular requirements for humidifiers intended for use with heating, ventilation or air conditioning systems.) |
| NF T47-276-1997 |
喷沙和砂石用橡胶软管规范 |
(Rubber hoses for sand and grit blasting. Specification.) |
| NF R10-212-2004 |
道路车辆.冲击试验中的测量技术.仪器 |
(Road vehicles - Measurement techniques in impact tests - Instrumentation.) |
| NF C42-544-2-2000 |
仪表用变压器.第2部分:感应电压变压器 |
(Instrument transformers - Part 2 : inductive voltage transformers.) |
| NF U14-505-1997 |
农用拖拉机和全套工具.四点刚性联结器规范 |
(Agricultural tractors and implements. Four-point rigid hitch. Specifications.) |
| NF A35-564-5-2002 |
冷镦和冷挤压的钢杆材、棒材和线材.第5部分:不锈钢的交货技术条件 |
(Steel rod, bars and wire for cold heading and cold extrusion - Part 5 : technical delivery conditions for stainless steels.) |
| NF E04-560-1-1999 |
产品几何量技术规范(GPS).几何特性.第1部分:一般条款和定义 |
(Geometrical Product Specifications (GPS) - Geometrical features - Part 1 : general terms and definitions.) |
| NF S91-201-2002 |
牙科材料.牙用汞齐合金 |
(Dental materials - Alloys for dental amalgam.) |
| NF S10-014-1996 |
光学玻璃坯件.25℃时的耐酸溶液腐蚀性.试验方法和分类 |
(Raw optical glass. Resistance to attack by aqueous acidic solutions at 25 degrees celsius. Test method and classification.) |
| NF C97-148-2002 |
使用19 mm 磁带(格式 D-1)的螺旋扫描数字元件视频磁带录音(DATR)系统 |
(Helical-scan digital component video cassette recording system using 19 mm magnetic tape (format D-1).) |
| NF V04-261-1999 |
奶油.脂肪含量的测定.重量分析法(参照法) |
(Cream - Determination of fat content - Gravimetric method (reference method).) |
| NF Z82-183-1996 |
综合业务数字网(ISDN).会议呼叫,扩充(CONF)的补充服务.服务说明 |
(Integrated Services Digital Network (ISDN). Conference call, add-on (CONF) supplementary service. Service description.) |
| NF Z83-500-1996 |
数字蜂窝状电信系统(第2阶段).GSM公共地面移动网络(PLMN)支撑的电信服务原理(GSM 02.01) |
(Digital cellular telecommunications system (phase 2). Principles of telecommunication services supported by a GSM public land mobile network (PLMN) (GSM 02.01).) |
| NF H96-334-2000 |
工业卡车的安全.潜在爆炸环境中的操作.用于可燃气体,蒸汽潮气和灰尘 |
(Safety of Industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust.) |
| NF P16-357-1-1997 |
无压地下排水系统用塑料管道系统.聚丙烯(PP).第1部分:管道、配件和系统的规范 |
(Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Part 1 : specifications for pipes, fittings and the system.) |
| NF M88-555-1-1997 |
玻璃增强塑料(GRP)制地下油罐.非压力储存液化石油基燃油用卧式圆柱形油罐.第1部分:单壁罐的要求和试验方法 |
(Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels. Part 1 : requirements and test methods for single wall tanks.) |
| NF S71-615-1-2002 |
浸渍服装.第1部分:耐磨服装,包括安全的要求 |
(Immersion suits - Part 1 : constant wear suits, requirements including safety.) |
| NF F37-042-1989 |
石油和化工液态产品运输用油罐车. 识别和装载牌 |
(TANK WAGONS FOR THE CARRIAGE OF LIQUID CHEMICAL AND OIL PRODUCT. IDENTITY AND LOADING PLATE.) |
| NF L92-311-1966 |
机上起重支垫用回转接头.(RECH.) |
(SWIVEL JOINTS FOR AIRCRAFT JACKING PADS. (RECH.).) |
| NF S76-007-3-2001 |
呼吸保护装置.试验方法.第3部分:耐呼吸性测定 |
(Respiratory protective devices - Methods of test - Part 3 : determination of breathing resistance.) |
| NF S93-004/A1-2001 |
医疗装置生产用不锈钢针管 |
(Stainless steel needle tubing for the manufacture of medical devices.) |
| NF E31-402-1/A1-2001 |
非家用单一燃烧器燃气式顶置辐射管加热器.第1部分:安全 |
(Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1 : safety.) |
| NF T76-156-1-2001 |
结构胶粘剂.腐蚀性.第1部分:对铜衬底腐蚀性的测定和分类 |
(Structural adhesives - Corrosion - Part 1 : determination and classification of corrosion to a copper substrate.) |
| NF G38-184-2001 |
土工织物及相关产品.排水系统中使用的特征要求 |
(Geotextiles and geotextile-related products - Characteristics required for use in drainage systems.) |
| NF C52-378-2-2001 |
转换变压器.第2部分:HVDC用变压器 |
(Convertor transformers - Part 2 : transformers for HVDC applications.) |
| NF C20-911-20-2000 |
着火危险试验.第11-20部分:试验火焰.500W火焰试验法 |
(Fire hazard testing - Part 11-20 : test flames - 500 W flame test methods.) |
| NF C74-393-2000 |
医用电气设备.第2-40部分:肌电图仪和唤醒反应设备安全性的特殊要求 |
(Medical electrical equipment - Part 2-40 : particular requirements for the safety of electromyographs and evoked response equipments.) |
| NF R43-411/A1-2000 |
道路车辆.牵引车和挂车间电连接用连接器.试验方法和性能要求 |
(Road vehicles - Connectors for electrical connections between towing vehicles and trailers - Test methods and performance requirements.) |
| NF A36-225-2000 |
压力容器用不锈钢棒 |
(Stainless steel bars for pressure purposes.) |
| NF P94-059-2000 |
土壤.调查与试验.砂性土最大和最小密度的测定 |
(Soils : investigation and testing - Determination of minimal and maximal density of cohesionless soils.) |
| NF C73-836-1995 |
家用和类似用途电器的安全.第2部分:商用电烹调炉灶、烘箱、炉架及炉架元件的特殊要求 |
(Safety of household and similar electrical appliances. Part 2 : particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements.) |
| NF E31-508/A1-2002 |
未达到70KW净热输入的带风扇助动燃烧器的空间加热用的家用燃气驱动对流空气加热器 |
(Domestic gas-fired forced convection air heaters for space heating with fan-assisted burners not exceeding a net heat input of 70 kW.) |
| NF P16-700-6-2002 |
废水处理厂.第6部分:活性污泥处理 |
(Wastewater treatment plants - Part 6 : activated sludge process.) |
| NF Z88-391-3-2000 |
通用个人电信(UPT).UPT第1段用安全结构规范.第3部分:一致性检验的规范(CTS) |
(Universal Personal Telecommunication (UPT) - Specification of the security architecture for UPT phase 1 - Part 3 : conformance Test Specification (ICS).) |
| NF F42-123-7-2-1999 |
铁路设施.固定设备.直流开关装置.直流牵引系统专用测量、控制和保护设备.绝缘电流传感器和电流测量设备 |
(Railway applications - Fixed installations D.C. switchgear - Part 7 : measurement, control and protection devices for specific use in d.c. traction systems - Section 2 : isolating current transducers and other current measuring devices.) |
| NF M62-301-3-2000 |
密封罩用组件.第3部分:光面门用传送系统、气闸室、双开门用传送系统和废鼓形容器的密封连接 |
(Components for containment enclosures - Part 3 : transfer systems such as plain doors, airlock chambers, double door transfer systems, leaktight connections for waste drums.) |
| NF P50-765-2000 |
建筑材料和产品的湿热性能.湿热膨胀系数的测定 |
(Hygrothermal performance of building materials and products - Determination of hygric expansion coefficient.) |
| NF E31-404-4/A1-2002 |
非家用多燃烧器燃气式架空辐射管加热器系统.第4部分:H系统安全 |
(Multi-burner gas-fired overhead tube heater systems for non-domestic use - Part 4 : system H, safety.) |
| NF C20-705-2000 |
环境试验.第2部分:试验.试验Sa:在地平面模拟太阳辐射 |
(Environmental testing - Part 2 : tests - Test Sa : simulated solar radiation at ground level.) |
| NF C31-688-2001 |
特种绕组线规范.第38部分:200级带粘结层的外涂聚酰胺亚胺的聚酯或聚酯亚胺漆包圆铜线 |
(Specifications for particular types of winding wires - Part 38 : polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200, with a bonding layer.) |
| NF S99-004-1996 |
医疗装置标签中使用的图形符号 |
(Graphical symbols for use in the labelling of medical devices.) |
| NF C60-450-2003 |
热熔断体.要求和应用指南 |
(Thermal-links - Requirements and application guide.) |
| NF A89-810-1-1999 |
热塑性半成品的焊接接头试验.第1部分:弯曲试验. |
(Testing of welded joints of thermoplastics semi-finished products - Part 1 : bend test.) |
| NF Z84-385-2001 |
电磁兼容性和无线电波谱物质(ERM).数字固定无线电链接和附属设备的电磁兼容性标准 |
(Electromagnetic compatibility and Radio Spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC) standard for digital fixed radio links and ancillary equiepment.) |
| NF Z83-518-1996 |
欧洲数字蜂窝状电信系统(第2阶段).被关闭用户群(CUG)补充服务.第1阶段(GSM 02.85) |
(European digital cellular telecommunications system (phase 2). Closed user group (CUG) supplementary services. Stage 1 (GSM 02.85).) |
| NF C93-540-2-22-2002 |
通信电缆.第2-22部分:通用设计规则及结构.PVC铠装化合物 |
(Communication cables - Part 2-22 : common design rules and construction - PVC sheathing compounds.) |
| NF D18-217-2004 |
卫生设备旋塞用低阻力淋浴出水口 |
(Low resistance shower outlets for sanitary tapware.) |
| NF T94-257-1998 |
饮用水处理用化学物质.碳酸钙 |
(CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. CALCIUM CARBONATE. (EUROPEAN STANDARD EN 1018).) |
| NF P90-306-2003 |
地面无屏障私人或集体用游泳池的防护构件.通向游泳池的安全屏障和途径.安全要求和试验方法 |
(Protective elements for in-ground, barrier-free, private or collective use swimming pools - Safety barriers and means of access to pool - Safety requirements and test methods.) |
| NF P14-201-1/A3-2003 |
DTU 26.2.建筑工程.有液压粘合剂座的找平层和平板.第1部分:技术规范 |
(DTU 26.2 - Building works - Screeds and slabs with a base of hydraulic binders - Part 1 : technical specifications.) |
| NF C47-741/A2-1998 |
NF EN 60730-2-11-1993的修改2 |
() |
| NF C97-312/A2-1995 |
NF EN 60268-12-1995的修改2 |
() |
| NF T66-044-2003 |
氢碳粘合剂.低温粘性测定.玻璃球法 |
(Hydrocarbon binders - Low temperature cohesivity determination - Glass beads method.) |
| NF P72-500-2001 |
石膏块.定义、要求和试验方法. |
(Gypsum blocks - Definitions, requirements and test methods.) |
| NF S97-531-2002 |
医疗信息学.有关输血的信息.指定的供血信息和指定的供血信息报告 |
(Medical informatics - Messages concerning blood transfusion - Nominative delivery message and report on nominative delivery message.) |
| NF Z82-263-1995 |
综合服务数字网络.7KHZ远程电话服务.服务描述 |
(Integrated Services Digital Network (ISDN). Telephony 7 kHz teleservice. Service description.) |
| NF C93-112-20-1-2000 |
电子设备用固定电容器.第20部分:空白详细规范:金属化聚苯硫醚膜介质直流片式固定电容器.评定水平EZ |
(Fixed capacitors for use in electronic equipment - Part 20 : blank detail specification : fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors - Assessment level EZ.) |
| NF E02-100-2-1993 |
ISO公差和配合体系.第2部分:孔径和轴的标准公差和极限误差等级表 |
(Iso system of limites and fits. Part 2 : tables of standard tolerance grades and limit deviations for holes and shafts.) |
| NF A91-124-2002 |
金属镀层.热浸镀锌.粘结强度试验法 |
(Metallic coatings - Galvanization by immersion in molten zinc (hot-dip galvanizing) - Adhesion test methods.) |
| NF C20-152-1988 |
482.6mm(79英寸)系列的机箱.尺寸.第三部分:箱和相连嵌入部件 |
(Dimensions of mechanical structures of the 482,6 mm (19 in) series. Part 3 : subracks and associated plug-in units.) |
| NF C93-864-1-2000 |
光纤绝缘子.第1部分:总规范 |
(Fibre optic isolators - Part 1 : generic specification.) |
| NF S94-753-2003 |
外科植入物.眼内填塞 |
(Ophthalmic implants - Ocular endotamponades.) |
| NF T76-305-2001 |
粘合剂.动物胶.取样和试验方法 |
(Adhesives - Animal glues - Methods of sampling and testing.) |
| NF M07-020-1-2000 |
石油产品.残留燃料油中水和沉淀物的测定.离心法 |
(Petroleum products - Determination of water and sediment in residual fuel oils - Centrifuge method.) |
| NF H90-025-2-1991 |
货运集装箱.有关船上集装箱的信息.第2部分:电传数据传送 |
(Freight containers. Information related to containers on board vessels. Part 2 : telex data transmission.) |
| NF C73-814/A1-2000 |
家用和类似电器的安全.第2-14部分:炊事机具的特殊要求 |
(Safety of household and similar electrical appliances - Part 2-14 : particular requirements for kitchen machines.) |
| NF U47-026-2002 |
动物健康分析方法.用病毒中性试验检测抗粘膜传染病抗体 |
(Animal health analysis methods - Detection of antibodies against mucosal disease by virus neutralisation test.) |
| NF A49-195-2001 |
螺纹钢管配件 |
(Steel threaded pipe fittings.) |
| NF X03-007-2003 |
与翻译有关的术语 |
(Translation-oriented terminography.) |
| NF C26-942-2002 |
电绝缘用清漆.第2部分:试验方法 |
(Varnisches used for electrical insulation - Part 2 : methods of test.) |
| NF Z82-357-1996 |
综合业务数字网(ISDN).对忙用户完成呼叫(ccbs)的补充服务.服务说明 |
(Integrated Services Digital Network (ISDN). Completion of calls to busy subscriber (ccbs) supplementary service. Service description.) |
| NF S31-610-1996 |
声学.无流量导管消音器插入损失率的测量.实验室调研法 |
(Acoustics. Measurement of insertion loss of ducted silencers without flow. Laboratory survey method.) |
| NF T47-270-1997 |
橡胶软管和软管组件.液压型橡胶包皮螺旋金属线增强.规范 |
(Rubber hoses and hose assemblies. Rubber-covered spiral wire reinforced hydraulic type. Specification.) |
| NF E51-202-1992 |
压缩机、风动工具和机械.词汇.风动工具和机械 |
(Compressors, pneumatic tools and machines. Vocabulary. Pneumatic tools and machines.) |
| NF E90-326-1997 |
便携式手提动力工具.手柄振动的测量.第14部分:石工用具和针式定标器 |
(Hand-held portable power tools. Measurement of vibrations at the hangle. Part 14 : stone-working tools and needle scalers.) |
| NF V37-036-2004 |
烟草.作为烟碱的总生物碱含量的测定.连续流分析法 |
(Tobacco - Determination of the content of total alkaloids content as nicotine - Continuous-flow analysis method.) |
| NF P61-203-2003 |
DTU 26.2和DTU 52.1的通用部分.抹灰准条或样板、平板和瓷砖下绝缘内涂层的镀涂.技术规范 |
(Part common to DTU 26.2 and DTU 52.1 - Installation of insulating undercoats under floating screed or plates, slab and under tiles - Technical specifications.) |
| NF E58-200/A2-2003 |
打桩设备.安全要求 |
(Piling equipment - Safety requirements.) |
| NF C31-651/A1-1998 |
NF EN 60317-1-1995的修改1 |
() |
| NF C52-558-2-19-2001 |
电力变压器、供电设备及类似设备的安全.第2-19部分:扰动衰减变压器的特殊要求 |
(Safety of power transformers, power supply units and similar devices - Part 2-19 : particular requirements for perturbation attenuation transformers.) |
| NF G52-002-2004 |
皮革.物理和机械试验.抗拉强度和伸长率的测定 |
(Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension.) |
| NF T75-415-1983 |
香精油.玫瑰香精油.香茅醇、橙花醛和香叶醛含量用气相色谱法测定 |
(ESSENTIALS OILS. OIL OF ROSE. DOSAGE OF CITRONELLOL,NEROL AND GERANIOL BY GAS CHROMATOGRAPHY.) |
| NF S54-023-2004 |
儿童看护用品.婴儿吊椅.安全要求和试验方法 |
(Child use care articles - Baby bouncers - Safety requirements and test methods.) |
| NF E63-116-2001 |
压力机.球形闸门凸模固定板.第2部分:小功率用C和D型 |
(Tools for pressing - Ball-lock punch retainers - Part 2 : types C and D, reduced for light duty.) |
| NF E38-331-1998 |
热交换器.区域供暖用水换热器.确定性能数据的试验程序 |
(Heat exchangers - Water to water heat exchangers for district heating - test procedures for establishing the performance data.) |
| NF T66-015-2000 |
沥青和沥青粘合剂.石蜡含量的测定.第2部分:萃取法 |
(Bitumen and bituminous binders - Determination of the paraffin wax content - Part 2 : method by extraction.) |
| NF C42-544-2/A2-2003 |
仪表用变压器.第2部分:感应电压变压器 |
(Instrument transformers - Part 2 : inductive voltage transformers.) |
| NF C93-400-6-1-2002 |
电子设备连接器.试验和测量.第6-1部分:动态应力试验.试验6a:稳态加速 |
(Connectors for electronic equipment - Tests and measurements - Part 6-1 : dynamic stress tests - Test 6a : acceleration, steady state.) |
| NF C27-350-1993 |
绝缘液的一般分类 |
(General classification of insulating liquids.) |
| NF S93-131-1999 |
医用注射设备.第2部分:一点切(OPC)针剂 |
(Injection equipment for medical use - Part 2 : One-point-cut (OPC) ampoules.) |
| NF E60-126-2001 |
双柱式平面磨床的试验条件.导轨磨床.精度试验 |
(Test conditions for surface grinding machines with two columns - Machines for grinding slideways - Testing of the accuracy.) |
| NF P16-800-1-2000 |
50PT以下的小型废水处理系统.第1部分:预制化粪池 |
(Small wastewater tretament systems for up to 50 PT - Part 1 : prefabricated septic tanks.) |
| NF C73-830-2000 |
家用和类似电器的安全.第2部分:房间加热器的特殊要求 |
(Safety of household and similar electrical appliances - Part 2 : particular requirements for room heaters.) |
| NF M08-034-2001 |
原油.运输可靠性.货物检验指南 |
(Crude petroleum - Transfer accountability - Guidelines for cargo inspection.) |
| NF Z89-679-2000 |
终端设备.有听觉障碍人用电话.助听器上的电话装置的电耦合 |
(Terminal Equipment (TE) - Telephony for the hearing impaired - Electrical coupling of telephone sets to hearing aids.) |
| NF E32-115-1-2002 |
壳体锅炉.第1部分:总则 |
(Shell boilers - Part 1 : general.) |
| NF E63-704-1999 |
铸造机器和设备的噪音试验规程 |
(Noise test code for foundry machines and equipment.) |
| NF F00-125-1-1999 |
铁路设施.设备的环境条件.平板车辆上的设备 |
(Railway applications - Environmental conditions for equipment - Part 1 : equipment on board rolling stock.) |
| NF A06-400-1999 |
铅和铅合金.分析取样方法 |
(Lead and lead alloys. Methods of sampling for analysis.) |
| NF S77-114-1997 |
人眼保护.通用太阳镜和阳光过滤器 |
(Personal eye protection. Sunglasses and sunglare filters for general use.) |
| NF A49-200-4-2002 |
无缝压力钢管.交货技术条件.第4部分:规定低温特性的合金和非合金钢管 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4 : non-alloy and alloy steel tubes with specified low temperature properties.) |
| NF U47-032-2002 |
动物健康分析方法. 用细菌培养基冻胶免疫扩散试验检测抗山羊关节炎/脑炎病毒抗体 |
(Animal health analysis methods - Detection of antibodies against Caprine arthritis/encephalitis virus by the Agar Gel Immunodiffusion Test.) |
| NF P16-364-3-2003 |
地下非压力排水和污水管网更新用塑料管道系统.第3部分:紧配合管用衬层 |
(Plastics piping systems for renovation of underground non-pressure drainage and sewerage network - Part 3 : lining with close-fit pipes.) |
| NF T51-914-2002 |
塑料.环氧树脂和环氧丙基酯.无机氯的测定 |
(Plastics - Epoxy resins and glycidyl esters - Determination of inorganic chlorine.) |
| NF C90-101-9-1999 |
电视信号、声信号和交互型业务用电缆网络.第9部分:CATV/SMATV 磁头端接口和 DVB/MPEG-2传输流的类似专用设 |
(Cable networks for television signals, sound signals and interactive services - Part 9 : interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams.) |
| NF S98-004-5-2000 |
消毒器试验和消毒方法用生物学系统.第5部分:低温蒸汽和甲醛消毒器用专门系统 |
(Biological systems for testing sterilizers and sterilization processes - Part 5 : particular systems for use in low temperature steam and formaldehyde sterilizers.) |
| NF R12-642-1991 |
道路车辆.液压制动器.非石油为基础的参考液体 |
(Road vehicles. Hydraulic braking systems. Non-petroleum base reference fluids.) |
| NF E22-308-2-2001 |
滚动轴承.附件.第2部分:锁紧螺母和锁紧装置.尺寸 |
(Rolling bearings - Accessories - Part 2 : locknuts and locking devices - Dimensions.) |
| NF P41-030-1999 |
有机材料对饮用水的影响.管道系统中水味道的测定.第1部分:试验方法 |
(Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems - Part 1 : test method.) |
| NF Z83-516-1996 |
数字蜂窝状电信系统(第2阶段).呼叫等待(CW)和呼叫保持(HOLD)补充服务.第1阶段(GSM 02.83) |
(Digital cellular telecommunications system (phase 2). Call waiting (CW) and call holding (HOLD) supplementary services. Stage 1 (GSM 02.83).) |
| NF T42-016-1987 |
天然橡胶胶乳浓缩物.挥发性脂肪酸值的测定 |
(Natural rubber latex concentrate. Determination of volatile fatty acid number.) |
| NF R10-014-2002 |
道路车辆.使用压力检测计进行曲柄轴箱压力测量法 |
(Road vehicles - Crankcase pressure measurement procedure using a pressure probe.) |
| NF T36-001-3-1999 |
涂料和清漆.涂覆材料的术语和定义.第3部分:表面特性和应用方法 |
(Paints and varnishes. Terms and definitions for coating materials. Part 3 : surface preparation and methods of application.) |
| NF E25-001-2003 |
紧固件.质量保证体系 |
(Fasteners - Quality assurance system.) |
| NF Z44-009-1999 |
信息和文献工作.目录数据元指南.第1部分:循环使用 |
(Information and documentation - Bibliographic data element directory - Part 4 : circulation applications.) |
| NF J37-825-1-2002 |
充气船.第1部分:最大电动机功率为4.5KW的船 |
(Inflatable boats - Part 1 : boats with a maximum motor power rating of 4,5 kW.) |
| NF C97-125-2002 |
小型光盘录制/播放器的测量方法 |
(Methods of measurement for minidisc recorders/players.) |
| NF F80-152-1981 |
通用铁路设备.扁平制品的冷弯半径.有色金属轧制品和半成品的最小弯曲半径 |
(RAILWAY TRANSPORT EQUIPMENT. COLD FOLDING RADII FOR FLAT PRODUCTS. MINIMUM FOLDING RADII FOR NON-FERROUS ROLLED PRODUCTS AND SEMI-PRODUCTS.) |
| NF T12-018-1987 |
纸浆.K值测定 |
(Pulps. Determination of kappa number.) |
| NF T31-015-1987 |
颜料.铬酸铅绿颜料.规范 |
(Pigments. Lead chrome green pigments. Specifications.) |
| NF A22-404-1987 |
铁矿石.以二氧化锰表示的活性氧含量的测定.滴定法 |
(Manganese ores. Determination of active oxygen content, expressed as manganese dioxide. Titrimetric method.) |
| NF P18-622-10-2002 |
集料的几何性能试验.第10部分:细粒评定.填料的分级(喷气筛) |
(Tests for geometrical properties of aggregates - Part 10 : assessment of fines - Grading of fillers (air jet sieving).) |
| NF T90-035-1997 |
水分析.临界味值(TON,TFN)的测定 |
(Water analysis. Determination of the threshold odour number (TON) and threshold flavour number (TFN).) |
| NF C58-300/A11-2001 |
标有国际再利用符号ISO 7000-1135和有关指令93/86/EEC和91/157/EEC的指示的次级电池和蓄电池组 |
(Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 and indications regarding directives 93/86/EEC and 91/157/EEC.) |
| NF D25-250-1999 |
儿童使用和护理用品.测定合成橡胶或橡胶奶嘴和安抚奶嘴中释放的N-亚硝胺和N-可亚硝化物质的方法 |
(Child use and care articles - Methods for determining the release of N-Nitrosamines and N-Nitrosatable substances from elastomer or rubber teats and soothers.) |
| NF E04-015-4-1998 |
动量图.图形符号.第4部分 |
(Kinematic diagrams - Graphical symbols - Part 4.) |
| NF T54-929-1997 |
塑料管道系统:聚乙烯管用材料和元件.挥发物含量测定 |
(Plastics piping systems. Polyethylene piping materials and components. Determination of volatile content.) |
| NF J95-027-1995 |
小型船舶.水力操纵系统 |
(Small craft. Hydraulic steering systems.) |
| NF L10-602-1-1990 |
航空和航天系列.锻造产品、锻件和铝合金模锻.技术规范.第１部分：一般要求 |
(Aerospace series. Aluminium alloy forging stock and forgings. Technical specification. Part 1 : general requirements.) |
| NF E60-182-2002 |
制造系统.性能读数.高架设备效率.球体设备效率.经济设备效率 |
(Manufacturing systems - Performance indications - Overall equipment effectiveness (TRS) - Global equipment effectiveness (TRG) - Economic equipment effectiveness (TRE).) |
| NF F00-125-2-2003 |
铁路设施.设备的环境条件.第2部分:固定式电气设备 |
(Railway applications - Environmental conditions for equipment - Part 2 : fixed electrical installations.) |
| NF E51-233-2003 |
石油、化学和气体工业.离心压缩机 |
(Petroleum, chemical and gas service industries - Centrifugal compressors.) |
| NF F74-122-2-2002 |
铁路设施.固定设备.第2部分:防止由直流牵引系统引起的杂散电流影响的保护性设备 |
(Railway applications - Fixed installations - Part 2 : protective provisions against the effects of stray currents caused by d.c. traction systems.) |
| NF E04-707-2-1990 |
机械铅笔.第2部分:黑铅.分类和尺寸 |
(Mechanical pencils. Part 2 : balck leads. Classification and dimensions.) |
| NF E25-723-2003 |
开口型沉头抽芯盲铆钉.Cu/St或Cu/Br或Cu/SSt |
(Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt.) |
| NF S54-010-1-2002 |
家用婴儿围栏.第1部分:安全要求 |
(Playpens for domestic use - Part 1 : safety requirements.) |
| NF T94-107-2002 |
生活饮用水处理用化学制剂.羟基硅酸盐氯化聚铝 |
(Chemicals used for treatment of water intended for human consumption - Polyaluminium chloride hydroxide silicate.) |
| NF P25-502-1999 |
百页窗和屏风.操作力的测定.试验方法 |
(Shutters and blinds - Measurement of operating force - Test methods.) |
| NF E82-002-2-1999 |
钢热模锻件.尺寸公差.第2部分:在水平锻造机器上的顶锻 |
(Steel die forgings - Tolerances on dimensions - Part 2 : upset forging made on horizontal forging machines.) |
| NF E25-701-2001 |
沉头铆钉.机械试验 |
(Blind rivets - Mechanical testing.) |
| NF A89-810-3-2000 |
热塑性半成品的焊接接头试验.第3部分:拉伸蠕变试验. |
(Testing of welded joints of thermoplastics semi-finished products - Part 3 : tensile creep test.) |
| NF E24-301-2-1989 |
同步皮带传动.皮带.第2部分:节距符号 MXL和XXL.米制尺寸 |
(Synchronous belt drives. Belts. Part 2 : pitch codes mxl and XXL. Metric dimensions.) |
| NF E58-303-1996 |
岩石用无护平巷掘进机和无杆轴掘进机的安全 |
(Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock.) |
| NF E05-059-1-2003 |
产品几何量技术规范(GPS).轮廓测量仪器的验收试验及再验证试验.第1部分:区域性表面结构用测量仪器 |
(Geometrical products specification (GPS) - Acceptance tests and reverification tests of profile measuring instruments - Part 1 : measuring instruments for areal surface texture.) |
| NF S52-328-2-2000 |
2米高或更高的水滑道.第2部分:说明书 |
(Water slides of 2 m height and more - Part 2 : instructions.) |
| NF A49-875-15-2000 |
钢管的无损检验.第15部分:层面缺陷探测用焊接钢管的生产用焊接带材/板材自动超声试验 |
(Non-destructive testing of steel tubes - Part 15 : automatic ultrasonic testing of strip/plate used in the manufacure of welded steel tubes for the detection of laminar imperfections.) |
| NF T66-026-1999 |
沥青和沥青粘合剂.Fraass断裂点的测定? |
(Bitumen and bituminous binders - Determination of the Fraass breaking point.) |
| NF T42-013-1987 |
天然橡胶乳.氢氧化钾值测定 |
(Rubber latex, natural. Determination of koh number.) |
| NF Z82-199-1996 |
综合业务数字网(ISDN).呼叫转移繁忙(cfb)的补充服务.服务说明 |
(Integrated Services Digital Network (ISDN). Call forwarding busy (cfb) supplementary service. Service description.) |
| NF T54-016-1-1999 |
供水用塑料管道系统.未增塑聚氯乙烯(PVC-U).第1部分:概述 |
(Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : general.) |
| NF F42-123-7-3-1999 |
铁路设施.固定设备.直流开关装置.直流牵引系统专用测量、控制和保护设备.绝缘电压传感器和其他电压测量设备 |
(Railways applications - Fixed installations D.C. switchgear - Part 7 : measurement, control and protection devices for specific use in d.c. traction systems - Section 3 : isolating voltage transducers and other voltage measuring devices.) |
| NF C61-743-1-2002 |
低压电涌保护装置元件.第311部分:气体放电管规范 |
(Components for low-voltage surge protective devices - Part 311 : specification for gas discharge tubes (GDT).) |
| NF S99-505-5-1999 |
医疗器械的生物评定.第5部分:细胞毒性试验.玻璃试管法 |
(Biological evaluation of medical devices - Part 5 : tests for in vitro cytotoxicity.) |
| NF Z66-202-1991 |
信息技术.数据通信.37路数据终端设备/数据通信设备(dte/dce)接口连接件和触点数分配 |
(Information technology. Data communication. 37-pole dte/dce interface connector and contact number assignments.) |
| NF T75-423-1998 |
肉桂油,中国型.肉桂醛含量测定.毛细管气相色谱法 |
(Oil of cassia, Chinese type. Determination of trans-cinnamaldehyde content. Gas chromatographic method on capillary columns.) |
| NF V03-713-1984 |
谷物和谷物制品.总脂类物质含量的测定? |
(Cereals and cereal products. Determination of total fat content.) |
| NF L54-002-040-1998 |
航空航天系列.电气及光学连接的元件.试验方法.第321部分:湿热.循环试验 |
(Aerospace series. Elements of electrical and optical connection. Test methods. Part 321 : damp heat, cyclic test.) |
| NF S61-985/A1-2002 |
火灾探测和火灾警报系统.第5部分:热探测器.地点探测器 |
(Fire detection and fire alarm systems - Part 5 : heat detectors - Point detectors.) |
| NF L15-811-2002 |
航空航天系列.焊接钛和钛合金用填充杆和填充焊丝.直径 D≥0.5mm 和D≤5.0mm .尺寸 |
(Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameters D more than or equal to 0,5 mm and less than or equal to 5,0 mm - Dimensions.) |
| NF X35-123-2-2002 |
平板视觉显示工作的人类工效学要求.第2部分:平板显示人类工效学要求 |
(Ergonomic requirements for work with visual displays based on flat panels - Part 2 : ergonomic requirements for flat panel displays.) |
| NF Z82-180-1996 |
综合业务数字网(ISDN).费用通知:呼叫结束收费信息(AOC-E)的补充服务.服务说明 |
(Integrated Services Digital Network (ISDN). Advice of charge : charging information at the end of the call (AOC-E) supplementary service. Service description.) |
| NF X50-056-2000 |
为居民提供的服务 |
(Services for resident persons.) |
| NF H31-400-2000 |
包装.轻规格的金属包装.锥形和圆柱形一般用途的容量达40000毫升的金属容器的标称填充容量 |
(Packaging - Light gauge metal packaging - Nominal filling volumes for round cylindrical and tapered general use metal containers up to 40 000 ml.) |
| NF E63-518-1992 |
模压工具.支承柱 |
(Tools for moulding. Support pillars.) |
| NF E60-111-3-1998 |
可变高度平台机器的试验条件.精度实验.第3部分:带垂直镗杆的机器 |
(Test condition for milling machines with table of variable height. Testing of accuracy. Part 3 : machines with vertical spindle.) |
| NF C31-006-2002 |
特种绕组线规范.第0-6部分:一般要求.玻璃丝绕包树脂或漆浸渍裸或漆包圆铜线 |
(Specifications for particular types of winding wires - Part 0-6 : general requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire.) |
| NF Z81-149-1996 |
终端设备(te).可视图文.音频语法 |
(Terminal equipment (te). Videotex. Audio syntax.) |
| NF C34-200-2003 |
架空线路用导线.润滑脂特性 |
(Conductors for overhead lines - Characteristics of greases.) |
| NF L31-201-1992 |
航空航天系列.机身用滚动轴承.技术规范 |
(Aerospace series. Airframe rolling bearings. Technical specification.) |
| NF Z83-562-1997 |
数字蜂窝通信系统(第2阶段).移动站速率适配.基地站(MS-BSS)接口(GSM 04.21) |
(Digital cellular telecommunications system (Phase 2). Rate adaptation on the Mobile Sttion. Base Station System (MS - BSS) interface (GSM 04.21).) |
| NF B42-006-1996 |
高级工业陶瓷.陶瓷粉末试验方法.第6部分:比表面积的测定 |
(Advanced technical ceramics. Methods of test for ceramic powders. Part 6 : determination of the specific surface area.) |
| NF S90-201-1990 |
外科医疗器械.输血必需 |
(Medico-surgical equipment. Transfusion sets.) |
| NF C51-119-2000 |
旋转电机.第9部分:噪声极限值 |
(Rotating electrical machines - Part 9 : noise limits.) |
| NF C48-300-4-1996 |
警报系统.第4部分:电磁兼容性.产品类标准:消防、侵入和公共警报系统的阻抗要求 |
(Alarm systems. Part 4 : electromagnetic compatibility. Product family standard : immunity requirements for components of fire, intruder and social alarm systems.) |
| NF X40-506-2003 |
装饰油灯.安全和试验方法 |
(Decorative oil lamps - Safety requirements and test methods.) |
| NF C73-803/A1-2000 |
家用和类似用途电器的安全.第2-3部分:电熨斗的特殊要求 |
(Safety of household and similar electrical appliances - Part 2-3 : particular requirements for electric irons.) |
| NF C93-537-3-8-2001 |
通信电缆.试验方法规范.第3-8部分:机械试验方法.电缆护套标记的耐磨性 |
(Communication cables - Specifications for test methods - Part 3-8 : mechanical test methods - Abrasion resistance of cable sheath markings.) |
| NF V03-124-2002 |
食品.玉米中B1和B2的测定.固相萃取精选的HPLC法 |
(Foodstuffs - Determination of fumonisins B1and B2 in maize - HPLC method with solid phase extraction clean-up.) |
| NF M87-240-2002 |
石油和天然气工业.作外壳、管道和连接材料用的耐腐蚀合金无缝管.交货技术条件 |
(Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions.) |
| NF E11-150-2-2002 |
产品几何量技术规范(GPS).坐标测量仪(CMM)的验收和重新验证的试验.第2部分:测量尺寸的坐标测量仪 |
(Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2 : CMMs used for measuring size.) |
| NF T66-004-1999 |
沥青和沥青粘合剂.针入度的测定 |
(Bitumen and bituminous binders - Determination of needle penetration.) |
| NF S93-071/A1-1999 |
一次性使用无菌膀胱导管 |
() |
| NF Z83-536-1996 |
数字蜂窝状电信系统(2).点对点(PP)短信息服务(SMS)的技术实现(GSM 03.40) |
(Digital cellular telecommunications system (phase 2). Technical realization of the short message service (SMS) point-to-point (PP) (GSM 03.40).) |
| NF P99-304-2001 |
道路信息和利用.道路控制语言.交换数据格式 |
(Road information and exploitation - Road control language - Exchanged data format.) |
| NF S95-169-1999 |
与医用气体管道系统终端元件连接的流量测量设备 |
(Flow-metering devices for connection to terminal units of medical gas pipeline systems.) |
| NF S74-542-1999 |
赛车手防护服.防热和防火.性能要求和试验方法 |
(Protective clothing for automobile racing drivers. Protection against heat and flame. Performance requirements and test methods.) |
| NF A02-001-1997 |
铸造.铸铁的设计系统.材料符号及材料编号 |
(Founding. Designation system for cast iron. Material symbols and material numbers.) |
| NF S52-317-1999 |
滑翔设备.背带.安全要求和强度试验 |
(Paragliding equipment - Harnesses - Safety requirements and strength tests.) |
| NF Z83-587-1-1998 |
蜂窝式数字通信系统(阶段2).基础站系统.移动通信业务交换中心(BSS-MSC)接口.第1部分:一般特性(GSM 08.01) |
(Digital cellular telecommunications system (phase 2). Base Station System. Mobile-services Switching Centre (BSS-MSC) interface. Part 1 : general aspects (GSM 08.01).) |
| NF Z84-440-1-2002 |
电信.电磁兼容性和无线电频谱管理(ERM).短程装置.用于1-40GHz频段的无线电通信设备.第1部分:技术特性和试验 |
(Telecommunications - Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Radio equipment to be used in the 1 GHz to 40 GHz frequency range - Part 1 : technical) |
| NF Z84-434-2-1999 |
无线电设备和系统(RES).终端系统配置用数字增强无线远程通信(DECT)和综合业务数字网(ISDN)之间的相互作用. |
(Radio Equipment and Systems (RES) - Digital Enhanced Cordless Telecommunications (DECT) and Integrated Services Digital Network (ISDN) interworking for end system configuration - Part 2 : access profile.) |
| NF E31-404-2/A3-2002 |
非家用的多个气体燃烧器架空辐射管式加热器系统.第2部分:系统E.安全性 |
(Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2 : system E, safety.) |
| NF M88-555-2-1997 |
玻璃增强塑料(GRP)制地下油罐.非压力储存液化石油基燃油用卧式圆柱形油罐.第2部分:单壁罐的运输、装卸、储 |
(Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels. Part 2 : transport, handling, storage and installation of single wall tanks.) |
| NF D35-310-1997 |
气态燃料用自动加压通风燃烧器 |
(Automatic forced draught burners for gaseous fuels.) |
| NF C93-537-4-6-2002 |
通信电缆.试验方法规范.第4-6部分:环境试验方法.温度循环试验 |
(Communiaction cables - Specifications for test methods - Part 4-6 : environmental test methods - Temperature cycling.) |
| NF P16-361-6-1997 |
无压地下排水系统用塑料管道系统.不饱和聚酯树脂(UP)基础上的玻璃增强热固塑料(GRP).第6部分:安装实施规程 |
(Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 6 : practices for installation.) |
| NF A00-001-1991 |
金属产品.检验文献的类型 |
(Metallic products - Types of inspection documents.) |
| NF X42-206-1998 |
研究、开发和分析实验室.微生物实验室安全级别、危险区域、地点和物理安全要求 |
(Laboratories for research, development and analysis. Containment levels of microbiology laboratories, areas of risk, localities and physical safety requirements.) |
| NF P98-132-2000 |
沥青路面.行车路面层和底层.薄层沥青混凝土.定义.分类.特性.生产.铺设 |
(Asphalt - Wearing course and base courses : thin layer asphalt concrete - Definition - Classification - Characteristics - Manufacturing- Laying.) |
| NF A04-191-2-1998 |
铸造.液体渗透检验.第2部分:熔模铸件 |
(Founding. Liquid penetrant inspection. Part 2 : investment castings.) |
| NF X31-557-2003 |
土壤质量.氧化还原电势的测定.现场试验 |
(Soil quality - Determination of redox potential - Field method.) |
| NF H90-202-1992 |
C组可换用的车箱.尺寸和一般要求 |
(Swap bodies. Swap bodies of class C. Dimension and general requirements.) |
| NF U47-400-2002 |
动物健康分析法.适用动物免疫血清盘旋试验组织指南 |
(Animal health analysis methods - Guide for the organisation of ring tests suitable for animal immuno-serology.) |
| NF S10-045-1999 |
光学和光学仪器.普通光学试验方法.成象场中有关光辉的测量 |
(Optics and optical instruments - General optical test methods - Measurement of relative irradiance in the image field.) |
| NF E24-301-1-1989 |
同步皮带传动.皮带.第1部分:节距符号MXL、XL、L、H、XH和XXH;米制和英制尺寸 |
(Synchronous belt drives. Belts. Part 1 : pitch codes mxl, XL,L,H, XH and XXH. Metric and inch dimensions.) |
| NF Z82-134-2001 |
综合业务数字网(ISDN).接通无响应呼叫(CCNR)补充业务.业务描述 |
(Integrated Services Digital Network (ISDN) - Completion of Calls on No Reply (CCNR) supplementary service - Service description.) |
| NF S95-180-3-2002 |
呼吸治疗设备.第3部分:输气设备 |
(Respiratory therapy equipment - Part 3 : air entrainment devices.) |
| NF M88-729/A1-2003 |
自闭合式LPG气瓶阀规范和试验 |
(Specification and testing of LPG cylinder valves - Self closing.) |
| NF D32-306-2002 |
燃烧固体燃料的住宅独立锅炉.额定热输出高达50KW.要求和试验方法 |
(Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods.) |
| NF X42-207-1999 |
生物技术.研究、开发和分析实验室.废物处理、减除活性和试验指南 |
(Biotechnology. Laboratories for research, development and analysis. Guidance for handling, inactivating and testing of waste.) |
| NF Z84-719-1-1999 |
无线电设备和系统(RES).专用广域寻呼业务.第1部分:专用广域寻呼系统的技术特性 |
(Radio Equipment and Systems (RES). Private wide area paging service. Part 1 : technical characteristics for private wide-area paging systems.) |
| NF S94-051-2000 |
外科植入物.金属材料.锻造不锈钢 |
(Implants for surgery - Metallic materials - Wrought stainless steel.) |
| NF H90-025-1-1991 |
货运集装箱.有关船上集装箱的信息.第1部分:海湾计划系统 |
(Freight containers. Information related to containers on board vessels. Part 1 : bay plan system.) |
| NF T72-174-2000 |
化学消毒剂和防腐剂.在家畜场中使用的化学消毒剂和防腐剂杀菌活性评定的定量悬浮液试验.试验方法和要求(第2 |
(Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary field - Test method and r) |
| NF C93-540-2-20-2002 |
通信电缆.第2-20部分:通用设计规则及结构.总则 |
(Communication cables - Part 2-20 : common design rules and construction - General.) |
| NF S10-018-1996 |
光学玻璃坯件.耐50℃水碱性溶液腐蚀性的试验方法和分类 |
(Raw optical glass. Resistance to attack by aqueous alkaline solutions at 50 degrees celsius. Test method and classification.) |
| NF E05-022-1998 |
产品几何量技术规范(GPS).表面结构:轮廓法.具有分层功能特性的表面.第2部分:用线性材料比率曲线反映的高度 |
(Geometrical Product Specifications (GPS) - Surface texture : profile method - Surfaces having stratified functional properties - Part 2 : height characterization using the linear material ratio curve.) |
| NF V18-401-2002 |
动物饲料.维生素A含量的测定.高效液相色谱法 |
(Animal feeding stuffs - Determination of vitamin A content - Method using high-performance liquid chromatography.) |
| NF D32-321-1/A2-2004 |
家用燃气灶具.第1-1部分:安全性.总则 |
(Domestic cooking appliances burning gas - Part 1-1 : safety - General.) |
| NF S92-021-2004 |
体外诊断医疗装置.生物试样的定量测量.校准仪和控制材料赋值的计量溯源性 |
(In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials.) |
| NF P99-305-2003 |
道路交通数据.详尽描述、存储和传播.可变感应电磁环路车辆探测装置和探测器.定义、特征和性能 |
(Road traffic data - Elaboration, storage, spreading - Variable inductance electromagnetic loop vehicle detection units and detectors - Definitions, characteristics and performances.) |
| NF V37-046-2004 |
环境中的烟草烟雾.可吸入的悬浮粒子的估算.基于茄呢醇的方法 |
(Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Method based on solanesol.) |
| NF C01-581/A1-1999 |
NF C01-581-1982的修改1 |
() |
| NF X43-273-1991 |
空气质量.工作环境的空气.甲基溴的测定.经处理的活性炭取样 |
(AIR QUALITY. WORKPLACE AIR. DETERMINATION OF METHYLBROMIDE. SAMPLING BY PUMPING TROUGH ACTIVATED CHARCOAL.) |
| NF P21-394-2002 |
架空线用木杆.耐久性要求 |
(Wood poles for overhead lines - Durability requirements.) |
| NF D12-201-1984 |
卫生设备.抽水马桶.适合使用性 |
(SANITARY EQUIPMENT. WC PANS. SUITABILITY FOR USE.) |
| NF H96-113-3-2002 |
固定的废弃物容器.第3部分:安全要求和健康要求 |
(Stationary waste containers - Part 3 : safety and health requirements.) |
| NF C93-859-3-2003 |
系列规范.室内用光学纤维电缆 |
(Family specification - Optical fibre cables for indoor applications.) |
| NF E63-002-1996 |
前开式机械动力压力机的验收条件.最大允许功率的测定和尺寸 |
(Open front mechanical power presses. Capacity ratings and dimensions.) |
| NF E48-353-2002 |
液力传动.活塞泵和电动机的安装法兰盘和轴端用尺寸及识别码.第2部分:米制系列 |
(Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2 : metric series.) |
| NF P16-361-3-1997 |
无压地下排水系统用塑料管道系统.不饱和聚酯树脂(UP)基础上的玻璃增强热固塑料(GRP).第3部分:配件 |
(Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 3 : fittings.) |
| NF X35-116-1996 |
机械的安全.可视危险信号.一般要求、设计和试验 |
(Safety of machinery. Visual danger signals. General requirements, design and testing.) |
| NF T60-615-2002 |
闪点测定.闭杯平衡法 |
(Determination of flash point - Closed up equilibrium method.) |
| NF T42-003-1987 |
橡胶乳.固体物质总含量测定 |
(Rubber latices. Determination of total solids content.) |
| NF X30-200-1996 |
环境管理系统.使用指南规范 |
(Environmental management systems. Specification with guidance for use.) |
| NF A05-670-2000 |
固定钢近海结构的阴极保护 |
(Cathodic protection for fixed steel offshore structures.) |
| NF M06-008-2000 |
石油工业.术语.第7部分:混杂条款 |
(Petroleum industry - Terminology - Part 7 : miscellaneous terms.) |
| NF E62-551-1994 |
机床.机加工主轴正面.功能尺寸 |
(Machine tools. Front faces of spindle holders for machining centres. Functional dimensions.) |
| NF T12-023-1982 |
纤维素.钙含量的测定.乙二胺四乙酸滴定法和火焰原子吸收光谱测定法 |
(Cellulose. Determination of the calcium content. Edta titrimetric method and flame atomic absorption spectrometric method.) |
| NF C93-540-2-27-2002 |
通信电缆.第2-27部分:一般设计规则和制造.无卤素的阻燃热塑性铠装化合物 |
(Communication cables - Part 2-27 : common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds.) |
| NF E31-404-2/A2-2002 |
非家用多个气体燃烧器架空辐射管式加热器系统.第2部分:系统E.安全性 |
(Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2 : system E, safety.) |
| NF L15-316-2002 |
航空航天系列.钛和钛合金圆棒.直径D≥6mm 和D≤160mm.尺寸 |
(Aerospace series - Round bars in titanium and titanium alloys - Diameter D more than or equal to 6 mm and less than or equal to 160 mm - Dimensions.) |
| NF C93-560-24-2002 |
射频连接器.第24部分:分规范.主要用于75欧姆电缆分配系统的螺纹连接射频同轴连接器(F型) |
(Radio-frequency connectors - Part 24 : sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohms cable distribution systems (type F).) |
| NF S76-014-2001 |
呼吸防护装置.颗粒防护用过滤半面罩.要求、检验和标记 |
(Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking.) |
| NF C93-643-211-2002 |
绝缘软套管.第3部分:各种型号套管的规范.第211活页:半硬式热缩聚烯烃套管.收缩率2:1 |
(Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheet 211 : heat-shrinkable, semi-rigid polyolefin, shrink ratio 2:1.) |
| NF M07-012-1996 |
石油产品.汽油耐氧化性测定.诱导期方法 |
(Petroleum products. Determination of oxidation stability of gasoline. Induction period method.) |
| NF M60-805-1-2003 |
核能.环境中放射性的测量.水.第1部分:荧光测定法测量水中铀的浓度 |
(Nuclear energy - Measurement of radioactivity in the environment - Water - Part 1 : measurement of the concentration of uranium in water by fluorimetry.) |
| NF C93-537-3-9-2001 |
通信电缆.试验方法规范.第3-9部分:机械试验方法.弯曲试验 |
(Communication cables - Specifications for test methods - Part 3-9 : mechanical test methods - Bending tests.) |
| NF P38-301-5-2000 |
单层屋顶用透光异型塑料板.第5部分:聚甲基丙烯酸甲酯薄板的特殊要求、试验方法和性能 |
(Light transmitting profiled plastic sheeting for single skin roofing - Part 5 : specific requirements, test methods and performance of polymethylmethacrylate (PMMA) sheets.) |
| NF T94-409-1999 |
饮用水处理用产品.砂和砾石 |
(Products used for treatment of water intended for human consumption - Sand and gravel.) |
| NF Z66-201-1991 |
信息技术.数据通信.15路数据终端设备/数据通信设备(dte/dce)接口连接件和触点数分配 |
(Information technology. Data communication. 15-pole dte/dce interface connector and contact number assignments.) |
| NF E52-610-2001 |
可移动升降工作平台.设计计算.稳定性标准.结构.安全.检查和试验 |
(Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests.) |
| NF T66-016-1999 |
沥青和沥青粘合剂.沥青乳液的筛余物和筛分存储稳定性的测定 |
(Bitumen and bituminous binders - Determination of residue on sieving of bitumen emulsions, and determinatin of storage stability by sieving.) |
| NF E60-031-1966 |
机床控制机构的操作方向 |
(Direction of operation of machine tool controls.) |
| NF C90-485-1-2003 |
信息技术.通用电缆敷设系统.第1部分:一般要求和办公区 |
(Information technology - Generic cabling systems - Part 1 : general requirements and office aeras.) |
| NF X35-122-16-1999 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第16部分:直接操作对话 |
(Ergonomic requirements for office work with visual display terminals (VDTs). Part 16 : direct manipulation dialogues.) |
| NF P90-303-2002 |
小游泳池.安全要求和试验方法 |
(Small swimming pools - Safety requirements and test methods.) |
| NF T57-227-1997 |
塑料管道系统.玻璃增强热固性塑料(GRP)管.周期性内部压力影响的试验方法 |
(Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test method for the effects of cyclic internal pressure.) |
| NF T90-133-1996 |
水质.铬的测定.原子吸收分光光度法 |
(Water quality. Determination of chromium. Atomic absorption spectrometric methods.) |
| NF S91-126-1996 |
牙根管器械.第3部分:充填器、填塞物和喷液器 |
(Dental root-canal instruments. Part 3 : condensers, pluggers and spreaders.) |
| NF Z85-166-1996 |
传输和多路转换(TM).基于准同步或同步数字系列的使用2048 kbit/S的设备用分级数字界面的物理和电子特性 |
(Transmission and multiplexing (TM). Physical and electrical characteristics of hierarchical digital interfaces for equipment using the 2048 kbit/S based plesiochronous or synchronous digital hierarchies.) |
| NF T72-074-1999 |
木材和木基制品的耐久性.防腐剂处理的实心木材.经处理的木材中杂酚油渗透率和滞留量的测定 |
(Durability of wood and wood-based products. Preservative-treated solid wood. Determination of the penetration and retention of creosote in treated wood.) |
| NF B57-013-2002 |
粒状软木.含水量的测定 |
(Granulated cork - Determination of moisture content.) |
| NF A05-115-1999 |
铜及铜合金.管的涡流测试 |
(Copper and copper alloys. Eddy current test for tubes.) |
| NF L22-169-1984 |
有 NF L22-070十字槽的100°全螺纹埋头螺钉 |
(BOLT,100 DEGREES COUNTERSUNK HEAD,THREADED TO HEAD,NF L 22-070,CROSS RECESS.) |
| NF D18-218-2004 |
卫生设备旋塞用低阻力淋浴软管 |
(Low resistance shower hoses for sanitary tapware.) |
| NF X35-203-1995 |
中等热环境.预测平均通过(PMV)和预测不满意百分率(PPD)的测定及温度致适条件规范 |
(Moderate thermal environments. Determination of the pmv and ppd indices and specification of the conditions for thermal comfort.) |
| NF P78-460/A2-2003 |
建筑物用玻璃.传热系数(U值)的测定.计算方法 |
(Glass in building - Determination of thermal transmittance (U value) - Calculation method.) |
| NF D35-322-1997 |
配有气体燃烧器的卫生设备用气体燃烧连续热水器(欧洲标准EN 26) |
(Gas-fired instantaneous water heaters for sanitory uses production, fitted with atmospheric burners.) |
| NF G07-210-2003 |
织物和纺织品.幕布和窗帘的燃烧性能.分类表 |
(Textiles and textile products - Burning behaviour - Curtains and drapes - Classification scheme.) |
| NF Z85-431-1997 |
传输和多路转换(TM).在射频范围24,25-29,50GHZ内操作的数字固定点到点无线电连接设备 |
(Transmission and Multiplexing (TM). Digital fixed point-to-point radio link equipment operating in the frequency range 24,25 GHz to 29,50 GHz.) |
| NF T60-500-1987 |
石油产品和润滑剂.分类方法.分类说明 |
(Petroleum products and lubricants. Method of classification. Definition of classes.) |
| NF T54-300-2-2003 |
普通用水、排水、污水地上和地下压力系统用塑料管道系统.聚乙烯(PE).第2部分:管道 |
(Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 2 : pipes.) |
| NF Z43-081-1983 |
16mm冲洗过的缩微胶片用单芯暗盒的尺寸和操作限制 |
(Dimensions and operational constraints for single-core cartridge for 16 mm processed microfilm.) |
| NF C18-400/A1-1996 |
NF EN 60900-1994 修改件 1 |
() |
| NF P90-307-2003 |
地面无屏障私人或集体用游泳池的防护构件.警报系统.安全要求和试验方法 |
(Protective elements for in-ground, barrier-free, private or collective use swimming pools - Alarm systems - Safety requirements and test methods.) |
| NF C61-110-2000 |
家用及类似用途的固定电气设备用开关.第1部分:一般要求 |
(Switches for household and similar fixed electrical installations - Part 1 : general requirements.) |
| NF C23-554/A1-1998 |
探测用电器和测量可燃气体.一般要求和检验方法.NF EN 50 054-1992的修改件1 |
() |
| NF U01-000-1987 |
农林用拖拉机和机械.分类和术语.第0部分:分类系统和分类 |
(Tractors and mahinery for agriculture and forestry. Classification and terminology. Part 0 : classification system and classification.) |
| NF S98-004-8-2000 |
消毒器试验和消毒方法用生物学系统.第8部分:环氧乙烷消毒器用的配套的生物指示器系统的特殊要求 |
(Biological systems for testing sterilizers and sterilization processes - Part 8 : particular requirements for self-contained biological indicator systems for use in ethylene oxide sterilizers.) |
| NF S54-021-2000 |
儿童护理物品.安慰奶嘴夹.安全要求和试验方法 |
(Child care articles - Soother holder - Safety requirements and test methods.) |
| NF P38-301-4-2000 |
单层屋顶用透光异型塑料板.第4部分:聚碳酸酯薄板的特殊要求、试验方法和性能 |
(Light transmitting profiled plastic sheeting for single skin roofing - Part 4 : specific requirements, test methods and performance of polycarbonate (PC) sheets.) |
| NF Z83-592-1998 |
蜂窝式数字通信系统(阶段2).基础站控制器.收发两用基础站(BSC-BTS)接口.一般特性(GSM 08.51) |
(Digital cellular telecommunications system (Phase 2). Base Station Controller. Base Transceiver Station (BSC - BTS) interface. General aspects (GSM 08.51).) |
| NF G33-003-2002 |
舱室用滚轴毛巾.性能要求和加工 |
(Cabinet roller towels - Performance requirements and processing.) |
| XP A35-045-2-2000 |
钢制品.预应力钢.第2部分:导线 |
(Steel products - Prestressing steels - Part 2 : wire.) |
| NF A51-129-1999 |
铜和铜合金.热交换器用无缝轧制翅翼管? |
(Copper and copper alloys - Rolled, finned seamless tubes for heat exchangers.) |
| NF S10-008-5-1996 |
光学和光学仪器.光学元件和系统绘图的准备.第5部分:表面形状公差 |
(Optics and optical instruments. Preparation of drawings for optical elements and systems. Part 5 : surface form tolerances.) |
| NF T60-226-2002 |
动植物脂肪和油.开口毛细管中的熔点(裂解点)测定 |
(Animal and vegetable fats and oils - Determination of melting point in open capillary tubes (slip point).) |
| NF M87-237-1-2002 |
石油和天然气工业用下降孔设备.人造升降机用行进腔体泵系统.第1部分:泵 |
(Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1 : pumps.) |
| NF E32-110-3-2002 |
水管式锅炉和辅助设备.第3部分:压力部件的设计和计算 |
(Water-tube boilers and auxiliary installations - Part 3 : design and calculation for pressure parts.) |
| NF C68-137-2002 |
电缆管理用电缆盘系统和电缆梯系统 |
(Cable tray systems and cable ladder systems for cable management.) |
| NF T57-226/A1-1999 |
NF EN 1450-1999的修改件1 |
() |
| NF Z83-537-1996 |
数字蜂窝状通信系统(第2阶段).短信息服务单元广播的技术实现(SMSCB)(GSM 03.41) |
(Digital cellular telecommunications system (phase 2). Technical realization of short message service cell broadcast (SMSCB) (GSM 03.41).) |
| NF A89-510-1997 |
焊缝的无损检验.焊接接头的X射线照相检验 |
(Non-destructive examination of welds. Radiographic examination of welded joints.) |
| NF A89-611-1992 |
钢焊缝.焊缝超声波检验用第2号校准块 |
(Welds in steel. Calibration block number 2 for ultrasonic examination of welds.) |
| NF U02-011-2001 |
农业用机械.糖用甜菜和饲料用甜菜收割机.安全 |
(Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety.) |
| NF E90-322-2-1995 |
便携式手提动力工具.手柄振动的测量.第5部分:施工用路面轧碎机和锤 |
(Hand-held portable power tools. Measurement of vibrations at the handle. Part 5 : pavement breakers and hammers for construction work.) |
| XP Z82-400-2000 |
综合业务数字网(ISDN).电话终端.付费电话 |
(Integrated Services Digital Network (ISDN) - Telephony terminals - Payphones.) |
| NF C72-210/A2-2003 |
双端荧光灯.性能规范 |
(Double-capped fluorescent lamps - Performance specifications.) |
| NF A50-645-2004 |
铝及铝合金.通用挤制圆盘管.规范 |
(Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification.) |
| NF H00-085-2004 |
包装.完全满运输包装件和成组货件.旋转下落的冲击试验 |
(Packaging - Complete, filled transport packages and unit loads - Impact test by rotational drop.) |
| NF H13-003-2004 |
包装.纸和纸板包装.纸板箱的设计 |
(Packaging - Paper and paperboard packaging - Design of cartons.) |
| NF E29-306-3/A1-2001 |
阀门.术语.第3部分:术语定义 |
(Valves - Terminology - Part 3 : definition of terms.) |
| NF E44-501-1991 |
小功率液压涡轮机.平台试验 |
(LOW POWER HYDRAULIC TURBINES. TESTS ON TEST RIG.) |
| NF P26-315/A1-2002 |
建筑五金.水平棒操纵的紧急出口装置.要求和实验方法 |
(Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods.) |
| NF S10-008-9-1996 |
光学和光学仪器.光学元件和系统绘图的准备.第9部分:表面处理和涂覆 |
(Optics and optical instruments. Preparation of drawings for optical elements and systems. Part 9 : surface treatment and coating.) |
| NF A89-522-1998 |
焊缝的无损检验.超声波检验.焊缝中的迹象表征 |
(Non-destructive examination of welds. Ultrasonic examination. Characterization of indications in welds.) |
| NF P98-134-2000 |
沥青混合料.行车路面层:多孔沥青.定义.分类.特性.生产.铺设 |
(Bituminous mixes - Wearing courses : porous asphalts - Definition - Classification - Characteristics - Manufacturing - Laying.) |
| NF E60-107-1985 |
机床.仿形车床和仿形辅助装置.验收条件.精确度检验 |
(Machine-tools. Copying lathes and copying attachments. Acceptance conditions. Testing of accuracy.) |
| NF E25-753-1992 |
无头U形销 |
(Clevis pins without head.) |
| NF E10-103-1988 |
尺寸测量方法.第4部份：圆度偏差 |
(Dimensional measuring. Part 4 : circularity deviation.) |
| NF A49-704-2002 |
岸上和海上管线用钢管和配件.外面双层聚氯乙烯挤压涂料 |
(Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings.) |
| NF Z85-078-2003 |
固定无线电系统.多点天线.1GHz-11GHz波段中的多点固定无线电系统用圆形极化天线 |
(Fixed Radio Systems - Multipoint antennas - Circulary polarized antennas for multipoint fixed radio systems in the 1 GHz to 11 GHz band.) |
| NF A03-035-2003 |
在高温下钢保证强度最小值的导出法 |
(Method for the derivation of minimum values of proof strength of steel at elevated temperatures.) |
| NF T57-221-1996 |
塑料管道系统.玻璃纤维增强热固塑料管和配件.短期内部压力下管壁密封性的检验的试验方法 |
(Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes and fittings. Test methods to prove the leaktightness of the wall under short-term internal pressure.) |
| NF C32-025-1996 |
电缆绝缘和护套材料通用试验方法.第1部分:一般应用.第2节:热老化方法 |
(Insulating and sheathing materials of electric cables - Common test methods - Part 1 : general application - Section 2 : thermal ageing methods.) |
| NF T94-352-1997 |
生活用水处理用化学制品.正磷酸盐氢化钠 |
(Chemicals used for treatment of water intended for human consumption. Disodium hydrogen orthophosphate.) |
| NF U44-310-1-2002 |
土壤改良剂和生长媒介.测定氮.改良的基耶达尔法 |
(Soil improvers and growing media - Determination of nitrogen - Part 1 : modified Kjeldahl method.) |
| NF P75-406-2002 |
建筑物用的绝热制品.工厂制作的聚亚氨酯(PUR)硬质泡沫塑料产品.规范 |
(Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification.) |
| NF C01-531-1980 |
电工词汇.５３１章.电子管 |
(Elecyrotechnical vocabulary. Chapter 531 : electronic tubes.) |
| NF E22-201-1992 |
滚珠螺钉.第1部分:词汇和命名 |
(Ball screws. Part 1 : vocabulary and designation.) |
| NF P18-622-4-2000 |
集料的几何特性试验.第4部分:粒子形状测定.形状系数 |
(Tests for geometrical properties of aggregates - Part 4 : determination of particle shape - Shape index.) |
| NF P93-521-2002 |
建筑工地用设备.建筑工地用梯级式或楼梯型辅助吊塔.材料.尺寸.负荷计算.耐用性和安全要求.试验 |
(Building site equipment - Ladder (steps) or stairway type building site access towers - Materials - Dimensions - Calculation loads - Resistance and safety requirements - Tests.) |
| NF C53-200-1999 |
用于电力装置的电子设备 |
(Electronic equipment for use in power installations.) |
| NF S98-007-2001 |
消毒器用非生物系统.第5部分:B型和S型小型消毒器的指示器系统和加工置换设备 |
(Non-biological systems for use in sterilizers - Part 5 : specification for indicator systems and process challenge devices for use in performance testing for small sterilizers Type B and Type S.) |
| NF E51-721-2002 |
建筑物通风.管道悬吊装置和支撑物.强度要求 |
(Ventilation for buildings - Ductwork hangers and supports - Requirements for strength.) |
| NF Z84-433/A2-1999 |
无线电设备和系统(RES).双边带和/或单边带调幅CB无线电设备.技术参数和测量方法 |
(Radio Equipment and Systems (RES). Double Side Band (DSB) and/or Single Side Band (SSB) amplitude modulated Citizens` Band (CB) radio equipment. Technical characteristics and methods of measurement.) |
| NF M07-096-2000 |
柴油燃料乳剂中的水密度测定.摆动U形管法 |
(Water in diesel fuel emulsions - Determination of density - Oscillating U-tube method.) |
| NF E62-103-1991 |
机床.夹头卡爪的花键.检验尺寸.安装 |
(Machine tools. Serrations for jaw chucks. Test dimensions. Assembly.) |
| NF G07-191-1999 |
织物和纺织产品.工业和技术织物的燃烧特性.垂直试样易燃性的测定方法 |
(Textiles and textile products. burning behaviour of industrial and technical textiles - Procedure to determine the ignitability of verticaly oriented specimens.) |
| NF J95-042-2000 |
小型飞行器.由动力再生小型飞行器发出的气载噪音的测量 |
(Small craft - Measurement of airborne sound emitted by powered recreational craft.) |
| NF L17-403-2002 |
航空航天系列.纤维增强塑料.未老化材料测试前整理的标准程序 |
(Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials.) |
| NF T54-016-3-1999 |
供水用塑料管道系统.未增塑聚氯乙烯(PVC-U).第3部分:配件 |
(Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3 : fittings.) |
| NF C93-620-3-2002 |
经质量评定的石英晶体振荡器.第3部分:标准外形和引线连接器 |
(Quartz crystal controlled oscillators of assessed quality - Part 3 : standard outlines and lead connections.) |
| NF T54-038-1981 |
装配有压力管用密封圈的未增塑聚氯乙烯管和接头.尺寸特性 |
(Unplasticized polyvinyl chloride pipes and fittings. Assembly by sealing rings for pressure pipelines. Dimensional caracteristics.) |
| NF M88-402-2001 |
沥青用橡胶软管及软管组件.规范 |
(Rubber hoses and hose assemblies for asphalt and bitumen - Specification.) |
| NF C31-701-2002 |
特种绕组线规范.第51部分:可焊接聚亚胺酯漆包圆铜线 |
(Specifications for particular types of winding wires - Part 51 : solderable polyurethane enamelled round copper wire, class 180.) |
| NF L13-129-2001 |
航空航天系列.镍基合金NI-B15701(NiPd34Au30).钎焊用充填金属.粉末或糊剂 |
(Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Powder or paste.) |
| NF C93-406-5-2002 |
直流低频模拟及数字高速数据应用系统用连接器. 第5部分:具有质量评定的在线插座.分规范 |
(Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 5 : in-line sockets with assessed quality - Sectional specification.) |
| NF A89-511-1998 |
焊缝的无损检验.焊接接头的X射线照相检验.验收等级 |
(Non-destructive examination of welds. Radiographic examination of welded joints. Acceptance levels.) |
| NF A49-875-18-2000 |
钢管的无损检验.第18部分:层面缺陷探测用无缝和焊接锰钢管末端磁粉检验 |
(Non-destructive testing of steel tubes - Part 18 : magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections.) |
| NF S77-113-2004 |
人员的眼睛保护.自动焊接滤光镜 |
(Personal eye-protection - Automatic welding filters.) |
| NF V03-009-1-2002 |
食品.食品中放射性测量.第1部分:食品取样、运输和保存指南. 实验室样品的 Obtention |
(Foodstuffs - Measurement of radioactivity in foodstuffs - Part 1 : guide on foodstuff sampling, transport and preservation - Obtention of a laboratory sample.) |
| NF A48-810-1995 |
燃气管道用球墨铸铁管、配件、附件及其接头.要求和试验方法 |
(Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods.) |
| NF T51-024-1-2003 |
塑料.硬度测定.第1部分:压球法 |
(Plastics - Determination of hardness - Part 1 : ball indentation method.) |
| NF Q64-013-1981 |
印刷工艺.胶印印刷用几种油墨比色法特性定义 |
(Graphic technology. Definition of the colorimetric characteristics of a range of primary inks for offset printing.) |
| NF T57-215-1996 |
塑料管道系统.玻璃增强热固性塑料管和配件接头.挠性和铰链接头耐泄漏和损伤试验方法 |
(Plastics piping systems. Joints for glass-reinforced thermosetting plastics (grp) pipes and fittings. Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints.) |
| NF T51-701-2002 |
塑料.氯乙烯均聚物和共聚物树脂.使用喷气式筛滤器械的筛析 |
(Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus.) |
| NF E60-133-2-1996 |
箱型立式钻床的试验条件.精度试验.第2部分:实用试验 |
(Test conditions for box type vertical drilling machines. Testing of the accuracy. Part 2 : pratical test.) |
| NF Z82-208-1997 |
综合服务数字网络(ISDN).免收电话费的附加服务.服务说明 |
(Integrated Services Digital Network (ISDN). Freephone (FPH) supplementary service. Service description.) |
| NF G08-001-3-1987 |
纺织.纤维和纱线.发货商品质量的测定.第3部分:样品净化规程 |
(Textiles. Fibres and yarns. Determination of commercial mass of consignments. Part 3 : specimen cleaning procedures.) |
| NF A88-950-1-2002 |
水下焊接焊工资格检验。第１部分：高压湿焊的潜水焊工 |
(Qualification testing of welders for under-water welding - Part 1 : diver-welders for hyperbaric wet welding.) |
| NF C93-400-1-1-2002 |
电子设备连接器.试验和测量.第1-1部分:一般检查.试验1a:外观检查 |
(Connectors for electronic equipment - Tests and measurements - Part 1-1 : general examination - Test 1a : visual examination.) |
| NF E62-550-1993 |
锥度为7/24的自动更换工具用的工具手柄.圆锥形主轴突出部分 |
(7/24 tapers for tool shanks for automatic changing. Taper for spindle noses.) |
| NF Z86-473-1997 |
电视声音和数据服务用数字广播系统.卫星主天线电视(SMATV)分配系统 |
(Digital broadcasting systems for television sound and data services. Satellite Master Antenna Television (SMATV) distribution systems.) |
| NF L31-216-1985 |
航空和航天系列.单排滚珠钢制钢性轴承.尺寸系列0和2.尺寸与负载 |
(Aerospace series. Bearings, airframe rolling, rigid single row ball bearings, in steel, diameter series 0 and 2, dimensions and loads.) |
| NF P61-202-2-2003 |
DTU 52.1.施工.专用市场.密封地板.第2部分:特殊条款 |
(DTU 52.1 - Execution of work - Private markets - Sealed flooring - Part 2 : special clauses.) |
| NF E04-750-1993 |
技术制图用绘图介质.天然描图纸 |
(Draughting media for technical drawings. Natural tracing paper.) |
| NF C60-436/A1-2002 |
小型熔断器.第6部分:小型熔丝链用熔断器盒 |
(Miniature fuses - Part 6 : fuse-holders for miniature fuse-links.) |
| NF A49-751-1994 |
地下热水管网的预隔热粘结管道系统.钢制供水管配件、聚氨基甲酸乙酯热绝缘材料以及高密度聚乙烯外壳 |
(Preinsulated bonded pipe systems for underground hot water networks. Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.) |
| NF Z15-007-2-1995 |
识别卡.发行者的识别.第2部分:应用和记录规程 |
(Identification cards. Identification of issuers. Part 2 : application and registration procedures.) |
| NF T50-064-1-2003 |
塑料.可比多点数据的采集和表示.第1部分:机械性能 |
(Plastics - Acquisition and presentation of comparable multipoint data - Part 1 : mechanical properties.) |
| NF T20-030-1985 |
工业用化学产品.透明液体.根据加德纳颜色标度用眼测定颜色 |
(Chemical products for industrial use. Transparent liquids. Visual assessment of colouration by the gardner colour scale.) |
| NF C61-150/A13-1998 |
NF EN 61008-1-1995的修改件13 |
() |
| NF C46-906-2000 |
电力系统遥护设备的性能和试验.第1部分:命令系统 |
(Teleprotection equipment of power systems - Performance and testing - Part 1 : command systems.) |
| NF C20-741-2000 |
环境试验.第2部分:试验.试验Z/BM:干热/低气压组合试验 |
(Environmental testing - Part 2 : tests - Test Z/BM : combined dry heat/low air pressure tests.) |
| NF C73-809/A1-2000 |
家用和类似用途电器的安全.第2-9部分:烤面包器、烤架、烤盘及类似器具的特殊要求 |
(Safety of household and similar electrical appliances - Part 2-9 : particular requirements for toasters, grills, roasters and similar appliances.) |
| NF U42-602-2-2002 |
肥料.水含量的测定(卡尔.费歇尔法).第2部分:2-丙醇作为萃取介质 |
(Fertilizers - Determination of water content (Karl Fischer methods) - Part 2 : 2-propanol as extracting medium.) |
| NF C23-555/A1-1998 |
NF EN 50055-1992的修改件1 |
() |
| NF Z83-551-1997 |
蜂窝式数字通信系统(阶段2).GSM公共地面移动网络(PLMN)检索参考配置(GSM 04.02) |
(Digital cellular telecommunications system (phase 2). GSM Public Land Mobile Network (PLMN) access reference configuration (GSM 04.02).) |
| NF S10-019-1998 |
大块预制型状的未加工的光学玻璃.气泡和其它杂质.试验方法和分类 |
(RAW OPTICAL GLASS IN BULK AND PRESHAPED FORMS. BUBBLES AND OTHER INCLUSIONS. TEST METHOD AND CLASSIFICATION.) |
| NF S10-008-11-1996 |
光学和光学仪器.光学元件和系统绘图的准备.第11部分:非公差性数据 |
(Optics and optical instruments. Preparation of drawings for optical elements and systems. Part 11 : non-toleranced data.) |
| NF P14-201-1/A2-2000 |
DTU 26.2.建筑工程.带有液压粘合剂的样板和板梁.第1部分:技术规范 |
(DTU 26.2 - Building works - Screeds and slabs with a base of hydraulic binders - Part 1 : technical specifications.) |
| NF U42-603-2002 |
浸灰材料.钙含量的测定.草酸酯法 |
(Liming materials - Determination of calcium content - Oxalate method.) |
| NF L31-229-1985 |
航空和航天系列.机身用轴承.单排滚珠钢制耐腐蚀轴承.尺寸系列3和4.尺寸和负载(EN 2020) |
(Aerospace series-. Bearings, airframe rolling, single row self-aligning roller bearings, in corrosion resisting steel, diameter series 3 and 4, dimensions and loads.) |
| NF A03-301-2002 |
铸件.图像分析法测量均差.含5%-11%硅的铝铸件 |
(Founding - Measurement of the mean intercept using image analysis - Aluminium castings with a 5 to 11 content % of silicium.) |
