| 标准号 |
中文名 |
英文名 |
| EN 591-2001 |
专业人员用试管诊断仪器使用说明书 |
Instructions for use for in vitro diagnostic instruments for professional use |
| EN 13697-2001 |
化学消毒剂和防腐剂 评价食品、工业、家用和研究所区域中使用化学消毒剂的杀细菌和/或杀真菌作用的定量不 |
Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirement |
| EN 868-10-2000 |
经消毒的医疗器械用包装材料和系统 第10部分：生产热密封袋、卷轴和盖的聚烯烃粘性涂层非编织材料 要求和 |
Packaging materials and systems for medical devices which are to be sterilized - Part 10: Adhesive coated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids - Requirements and test methods |
| EN ISO 10993-8-2000 |
医疗器械的生物学评价 第8部分：生物学试验参照样品的选择和定性 |
Biological evaluation of medical devices - Part 8: Selection and qualification of reference materials for biological tests (ISO 10993-8:2000) |
| EN 829-1996 |
玻璃试管内的诊断系统 医学和生物试样的传送包装 要求、试验 |
In vitro diagnostic systems - Transport packages for medical and biological specimens - Requirements, tests |
| EN ISO 14160-1998 |
使用液体化学灭菌剂对包括动物源材料在内的一次性使用医疗器具进行灭菌的确认和常规控制 |
Sterilization of single-use medical devices incorporating materials of animal origin - Validation and routine control of sterilization by liquid sterilants (ISO 14160:1998) |
| EN 928-1995 |
玻璃试管诊断系统 关于玻璃试管诊断医疗设备的EN 29001、EN 46001、EN 29002、EN 46002的应用指南 |
In vitro diagnostic systems - Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for in vitro diagnostic medical devices |
| EN ISO 10993-13-1998 |
医疗器械的生物学评价 第13部分：聚合物医疗器械降解产物的定性与定量 |
Biological evaluation of medical devices - Part 13: Identification and quantification of degradation products from polymeric medical devices (ISO 10993-13:1998) |
| EN 1658-1996 |
试管诊断仪器的标度要求 |
Requirements for marking of in vitro diagnostic instruments |
| EN 868-1-1997 |
经消毒的医疗器械用包装材料和系统 第1部分：一般要求和试验方法 |
Packaging materials and systems for medical devices which are to be sterilized - Part 1: General requirements and test methods |
| EN 12287-1999 |
体外诊断医疗器械 生物起源样品中数量的测量 标准物质描述 |
In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Description of reference materials |
| EN ISO 10993-14-2001 |
医疗器械的生物学评价 第14部分：陶瓷降解产物的识别与合格鉴定 |
Biological evaluation of medical devices - Part 14: Identification and quantification of degradation products from ceramics (ISO 10993-14:2001) |
| EN ISO 10993-5-1999 |
医疗器械的生物学评价 第5部分：体外细胞毒性试验 |
Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity (ISO 10993-5:1999) |
| EN 868-2-1999 |
经消毒的医疗器械用包装材料和系统 第2部分：消毒包裹物 要求和试验方法 |
Packaging materials and systems for medical devices which are to be sterilized - Part 2: Sterilization wrap - Requirements and test methods |
| EN 12376-1999 |
体外诊断医疗器械 由制造商提供的有关生物学染色用体外诊断剂的信息 |
In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology |
| EN ISO 10993-15-2000 |
医疗器械的生物学评价 第15部分：金属与合金降解产物的识别与定性 |
Biological evaluation of medical devices - Part 15: Identification and quantification of degradation products from metals and alloys (ISO 10993-15:2000) |
| EN 1644-1-1997 |
医用非织物敷布的试验方法 第1部分：制造敷布用的非织物 |
Test methods for nonwoven compresses for medical use - Part 1: Nonwovens used in the manufacture of compresses |
| EN 1985-1998 |
助步器 一般要求和试验方法 |
Walking aids - General requirements and test methods |
| CR 13846-2000 |
保持和扩展污泥应用和处置方法的建议 |
Recommendations to preserve and extend sludge utilisation and disposal routes |
| EN 12442-1-2000 |
医疗设备制造中使用的动物组织及其衍生物 第1部分：风险分析和管理 |
Animal tissues and their derivatives utilized in the manufacture of medical devices - Part 1: Analysis and management of risk |
| EN 455-1-2000 |
一次性使用的医疗手套 第1部分：防洞要求和测试 |
Medical gloves for single use - Part 1: Requirements and testing for freedom from holes |
| EN 12183-1999 |
手推轮椅 要求和试验方法 |
Manually propelled wheelchairs - Requirements and test methods |
| EN ISO 11334-1-1997 |
用胳膊操作的助步器 要求和试验方法 第1部分：肘支撑器 |
Walking aids manipulated by one arm - Requirements and test methods - Part 1: Elbow crutches (ISO 11334-1:1994) |
| EN 12442-2-2000 |
医疗设备制造中使用的动物组织及其衍生物 第2部分：来源采集和处理的控制 |
Animal tissues and their derivatives utilized in the manufacture of medical devices - Part 2: Controls on sourcing, collection and handling |
| EN 1865-1999 |
用于道路救护车的担架和其它病人处理设备的规范 |
Specifications for stretchers and other patient handling equipment used in road ambulances |
| EN 12184-1999 |
电动轮椅、小型摩托车及其充电器 要求和试验方法 |
Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods |
| EN 12442-3-2000 |
医疗设备制造中使用的动物组织及其衍生物 第3部分：病毒和传染性试剂消除和/或钝化的验证 |
Animal tissues and their derivatives utilized in the manufacture of medical devices - Part 3: Validation of the elimination and/or inactivation of viruses and transmissible agents |
| EN 12531-1998 |
脚轮和轮子 病床用脚轮 |
Castors and wheels - Hospital bed castors |
| EN ISO 8669-2-1996 |
尿收集袋 第2部分：要求与测试方法 |
Urine collection bags - Part 2: Requirements and test methods (ISO 8669-2:1996) |
| EN 12523-1999 |
外肢修复和外肢矫形 要求和试验方法 |
External limb prostheses and external orthoses - Requirements and test methods |
| EN 1644-2-2000 |
医用非织物敷布的检验方法 第2部分：成品敷布 |
Test methods for nonwoven compresses for medical use - Part 2: Finished compresses |
| EN 60601-2-35-1996 |
医用电气设备 第2－35部分：医用电热毯、褥和垫安全的特殊要求. |
Medical electrical equipment - Part 2-35: Particular requirament for the safety of blanket, pads and mattresses, intended for heating in medical use(IEC 601-35:1996) |
| EN ISO 8670-2-1996 |
造口术收集袋 第2部分：要求和测试方法 |
Ostomy collection bags - Part 2: Requirements and test methods (ISO 8670-2:1996) |
| EN ISO 10535-1998 |
运送残疾人用提升机 要求和试验方法 |
Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:1998) |
| ENV 12718-2001 |
医用压缩袜 |
Medical compression hosiery |
| EN ISO 11683-1997 |
包装 触摸危险标志 要求 |
Packaging - Tactile warnings of danger - Requirements (ISO 11683:1997) |
| EN ISO 11199-2-1999 |
双臂操作的助步器 要求和试验方法 第2部分：滚动器 |
Walking aids manipulated by both arms - Requirements and test methods - Part 2: Rollators (ISO 11199-2:1999) |
| EN 60601-2-46-1998 |
医用电气设备 第2－46部分：手术台安全专用要求 |
Medical electrical equipment - Part 2-46: Particular requirements for the safety of operating tables (IEC 60601-2-46:1998) |
| ENV 12719-2001 |
医用防血栓袜 |
Medical thrombosis prophylaxis hosiery |
| EN ISO 14041-1998 |
环境管理 生命周期评价 目的与范围的确定清单分析 |
Environmental management - Life cycle assessment - Goal and scope definition and inventory analysis (ISO 14041:1998) |
| EN ISO 14001-1996 |
环境管理体系 规范及使用指南 |
Environmental management systems - Specification with guidance for use (ISO 14001:1996) |
| EN 12182-1999 |
残疾人专用设备 一般要求和试验方法 |
Technical aids for disabled persons - General requirements and test methods |
| EN ISO 14043-2000 |
环境管理 生命周期评价 生命周期解释 |
Environmental management - Life cycle assessment - Life cycle interpretation (ISO 14043:2000) |
| EN ISO 14040-1997 |
环境管理 生命周期评价 原则与框架 |
Environmental management - Life cycle assessment - Principles and framework (ISO 14040:1997) |
| CR 13097-2001 |
污泥特性 农业中应用的良好实践 |
Characterization of sludges - Good practice for utilisation in agriculture |
| EN 455-2-2000 |
一次性使用的医疗手套 第2部分：物理性能的要求和测试 |
Medical gloves for single use - Part 2: Requirements and testing for physical properties (including Technical Corrigendum 1:1996) |
| EN ISO 14020-2001 |
环境标志和声明 通用原则 |
Environmental labels and declarations - General principles (ISO 14020:2000) |
| CR 13841-2000 |
工作场所空气 描述参考时间段对日照数据提供的影响的科学基础 |
Workplace atmospheres - Scientific basis to describe the influence of the reference period on the presentation of exposure data |
| EN 455-3-1999 |
一次性使用的医疗手套 第3部分：生物评价的要求和测试 |
Medical gloves for single use - Part 3: Requirements and testing for biological evaluation |
| EN ISO 14042-2000 |
环境管理 生命周期评价 生命周期影响评价 |
Environmental management - Life cycle assessment - Life cycle impact assessment (ISO 14042:2000) |
| ENV 12940-1999 |
制鞋废料 废料的分类和管理 |
Footwear manufacturing wastes - Waste classification and management |
| EN ISO 16021-2000 |
吸尿器材 从使用者和护理人员观点对一次性成人不能控制吸尿器材的评价基本原则 |
Urine-absorbing aids - Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers (ISO 16021:2000) |
| EN ISO 14021-2001 |
环境标志和声明 自我环境声明(II型环境标志) |
Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:1999) |
| EN ISO 5667-13-1997 |
水质 采样 第13部分：生活污水和水处理厂污水采样指南 |
Water quality - Sampling - Part 13: Guidance on sampling of sludges from sewage and water treatment works (ISO 5667-13:1997) |
| EN 12176-1998 |
淤泥的描述 pH值的测定 |
Characterization of sludge - Determination of pH-value |
| EN 1970-2000 |
伤残人用可调床 要求与试验方法 |
Adjustable beds for disabled persons - Requirements and test methods |
| EN ISO 11199-1-1999 |
双臂操作的助步器 要求和试验方法 第1部分：步行支架 |
Walking aids manipulated by both arms - Requirements and test methods - Part 1: Walking frames (ISO 11199-1:1999) |
| EN ISO 11690-3-1998 |
声学 低噪声机器工作间设计的推荐实用规程 第3部分：工作室中的声传播和噪声预测 |
Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 3: Sound propagation and noise prediction in workrooms (ISO/TR 11690-3:1997) |
| EN ISO 11334-4-1999 |
用胳膊操作的助步器 要求和试验方法 第4部分：具有三条或多于三条腿支撑的步行器扶杖 |
Walking aids manipulated by one arm - Requirements and test methods - Part 4: Walking sticks with three or more legs (ISO 11334-4:1999) |
| ENV 12920-1997 |
废物特性 指定条件下废物浸出特性的测定方法 |
Characterization of waste - Methodology for the determination of the leaching behaviour of waste under specified conditions |
| ENV 12299-1999 |
铁路应用 乘客乘坐舒适性 测量和评价 |
Railway applications - Ride comfort for passengers - Measurement and evaluation |
| EN 1033-1995 |
手臂振动 手操纵机器把手平面振动的试验室测量 概述 |
Hand-arm vibration - Laboratory measurement of vibration at the grip surface of hand-guided machinery - General |
| EN 12816-2001 |
可移动再充式液化石油气（LPG）钢瓶和铝瓶 处理 |
Transportable refillable steel and aluminium LPG cylinders - Disposal |
| EN 12879-2000 |
污泥特性 干质量燃烧损耗测定 |
Characterization of sludges - Determination of the loss on ignition of dry mass |
| EN 13205-2001 |
工厂环境 空气粒子浓度测定仪性能评估 |
Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations |
| EN ISO 14644-4-2001 |
洁净室和相关控制环境 第4部分：设计、建造和启用 |
Cleanrooms and associated controlled environments - Part 4: Design, construction and start-up (ISO 14644-4:2001) |
| EN 13429-2000 |
包装 再生 |
Packaging - Reuse |
| EN 12880-2000 |
污泥特性 干渣和含水量测定 |
Characterization of sludges - Determination of dry residue and water content |
| EN 45544-1-1999 |
工作场所 有毒气体和蒸气的直接检测和直接浓度测量用电气设备 第1部分：试验方法和一般要求 |
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods |
| EN 1093-3-1996 |
机械安全 空气中有害物质排放的评估 第3部分：特定污染的排放率 实际污染物的分组试验方法 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Emission rate of a specified pollutant - Bench test method using the real pollutant |
| EN 13430-2000 |
包装 以材料重复利用的方式回收的包装的要求 |
Packaging - Requirements for packaging recoverable by material recycling |
| EN 13346-2000 |
污泥特性 痕量元素和磷的测定 王水萃取法 |
Characterization of sludges - Determination of trace elements and phosphorus - Aqua regia extraction methods |
| EN 45544-2-1999 |
工作场所 有毒气体和蒸气的直接检测和直接浓度测量用电气设备 第2部分：极限值域内浓度测量用设备的性能 |
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for measuring concentrations in the region of limit values |
| EN 1093-4-1996 |
机械安全 空气中有害物质排放的评估 第4部分：排气系统的俘获效率 示踪法 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method |
| EN 840-3-1997 |
移动式废料箱 第3部分：吊耳形和/或梳形提升装置用四轮容积为770L至1300L带圆顶盖的装料箱 尺寸和设计 |
Mobile waste containers - Part 3: Containers with 4 wheels with a capacity from 770 L to 1300 L with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design |
| EN ISO 11690-1-1996 |
声学 低噪声机器工作间设计的推荐实用规程 第1部分：噪声控制策略 |
Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies (ISO 11690-1:1996) |
| EN 45544-4-1999 |
工作场所 有毒气体和蒸气的直接检测和直接浓度测量用电气设备 第4部分：.选择、安装、使用和维修的指南 |
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance |
| EN 1093-6-1998 |
机械安全 空气中有害物质排放的评估 第6部分：通过未经管道流出的质量来评价分离离效率 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet |
| EN 13427-2000 |
包装 包装和包装废物领域中采用欧洲标准的要求 |
Packaging - Requirements for the use of European standards in the field of packaging and packaging waste |
| EN ISO 11690-2-1996 |
声学 低噪声机器工作间设计的推荐实用规程 第2部分：噪声控制措施 |
Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures (ISO 11690-2:1996) |
| EN 1093-7-1998 |
机械安全 空气中有害物质排放的评估 第7部分：通过经管道流出的质量来评价分离离效率 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet |
| EN ISO 10882-1-2001 |
焊接和相关工艺的卫生与安全 工作人员呼吸区域中空气中悬浮颗粒物及气体的取样 第1部分：空气中粒子取样 |
Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operators breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2001) |
| EN ISO 8253-1-1998 |
声学 听力测试方法 第1部分：基本纯音气导和骨导阈测听方法 |
Acoustics - Audiometric test methods - Part 1: Basic pure tone air and bone conduction threshold audiometry (ISO 8253-1:1989) |
| ENV 28041-1993 |
振动人体反应 测量仪 |
Human response to vibration; measuring instrumentation (ISO 8041:1990) |
| EN ISO 14644-1-1999 |
洁净室和相关控制环境 第1部分：空气洁净度分级 |
Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness (ISO 14644-1:1999) |
| EN 1093-8-1998 |
机械安全 空气中有害物质排放的评估 第8部分：分组法测定污染物的浓度参数 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method |
| EN ISO 8253-3-1998 |
声学 听力测试方法 第3部分：语言测听方法 |
Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO 8253-3:1996) |
| EN 1231-1996 |
工作场所空气 短期检测管测量系统 要求和试验方法 |
Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods |
| EN ISO 14024-2000 |
环境标志和声明 I型环境标志 原则和程序 |
Environmental labels and declarations - Type I environmental labelling - Principles and procedures (ISO 14024:1999) |
| EN 1093-11-2001 |
机械安全 空气中有害物质排放的评估 第11部分：静化指数 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index |
| EN 45544-3-1999 |
工作场所 有毒气体和蒸气的直接检测和直接浓度测量用电气设备 第3部分：大大超过极限值的浓度测量用设备 |
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3: Performance requirements for apparatus used for measuring concentrations well above limit values |
| EN ISO 14031-1999 |
环境管理 环境表现评价 指南 |
Environmental management - Environmental performance evaluation - Guidelines (ISO 14031:1999) |
| EN ISO 8253-2-1998 |
声学 听力测试方法 第2部分：纯音和窄带试验信号声场测听方法 |
Acoustics - Audiometric test methods - Part 2: Sound field audiometry with pure tone and narrow-band test signals (ISO 8253-2:1992) |
| EN 13137-2001 |
废物特性 废物、污泥及沉淀物中总有机碳含量（TOC）的测定 |
Characterization of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments |
| EN 13444-1-2001 |
电动汽车 混合车排放物测定 第1部分：热电混合车 |
Electrically propelled road vehicles - Measurement of emissions of hybrid vehicles - Part 1: Thermal electric hybrid vehicles |
| CR 13910-2000 |
包装材料 包装材料寿命周期分析标准和方法学报告 |
Packaging - Report on criteria and methodologies for life cycle analysis of packaging |
| EN 840-2-1997 |
移动式废料箱 第2部分：吊耳形和/或梳形提升装置用四轮容积为500L至1200L带平盖的装料箱 尺寸和设计 |
Mobile waste containers - Part 2: Containers with 4 wheels with a capacity from 500 L to 1200 L with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design |
| EN 13342-2000 |
污泥特性 凯氏氮测定法 |
Characterisation of sludges - Determination of Kjeldahl nitrogen |
| EN 838-1995 |
工作场所的空气 测定气体和水蒸汽用的扩散取样器 要求和试验方法 |
Workplace atmospheres - Diffusive samplers for the determination of gases and vapours - Requirements and test methods |
| EN 1911-2-1998 |
固定源辐射 HCI的人工测定法 第2部分：气体混合物吸收 |
Stationary source emissions - Manual method of determination of HCl - Part 2: Gaseous compounds absorption |
| EN 12096-1997 |
机械振动 振动发射值的验证和说明 |
Mechanical vibration - Declaration and verification of vibration emission values |
| EN 840-1-1997 |
移动式废料箱 第1部分：梳形提升装置用双轮容积为80L至390L的装料箱 尺寸和设计 |
Mobile waste containers - Part 1: Containers with 2 wheels with a capacity from 80 L to 390 L for comb lifting devices - Dimensions and design |
| EN 1232-1997 |
工作场所空气 化学试剂的个人抽样用泵 要求和试验方法 |
Workplace atmospheres - Pumps for personal sampling of chemical agents - Requirements and test methods |
| EN 1948-2-1996 |
固定源排放 PCDDs/PCDFs的质量浓度测定 第2部分：萃取和提纯 |
Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs - Part 2: Extraction and clean-up |
| ENV 13419-2-1999 |
建筑制品 挥发性有机化合物释放物的测定 第2部分：释放试验箱法 |
Building products - Determination of the emission of volatile organic compounds - Part 2: Emission test cell method |
| EN ISO 10882-2-2000 |
焊接和相关工艺的卫生与安全 工作人员呼吸区域中空气中悬浮颗粒物及气体的取样 第2部分：气体取样 |
Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operatiors breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000) |
| EN ISO 8178-5-1997 |
往复式内燃机 排放测量 第5部分：试验用燃料 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels (ISO 8178-5:1997) |
| EN 1948-3-1996 |
固定源排放 PCDDs/PCDFs的质量浓度测定 第3部分：识别及定量化 |
Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs - Part 3: Identification and quantification |
| ENV 13419-3-1999 |
建筑制品 挥发性有机化合物释放物的测定 第3部分：取样、样品保存和试样制备方法 |
Building products - Determination of the emission of volatile organic compounds - Part 3: Procedure for sampling, storage of samples and preparation of test specimens |
| EN ISO 14644-2-2000 |
洁净室和相关控制环境 第2部分：与ISO 14644-1连续相配位的检测和监控规范 |
Cleanrooms and associated controlled environments - Part 2: Specifications for testing and monitoring to prove continued compliance with ISO 14644-1 (ISO 14644-2:2000) |
| EN ISO 8689-2-2000 |
水质 江河中生物的分类 第2部分：对底栖微型无脊椎动物调查的生物质量数据的表示方法指南 |
Water quality - Biological classification of rivers - Part 2: Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-2:2000) |
| EN 12619-1999 |
固定源排放 低浓度烟气中总气态有机碳质量浓度的测定 连续火焰电离检测器法 |
Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases - Continuous flame ionisation detector method |
| EN ISO 8689-1-2000 |
水质 江河中生物的分类 第1部分：对底栖微型无脊椎动物调查的生物质量数据的解释方法指南 |
Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-1:2000) |
| EN 1093-1-1998 |
机械安全 空气中有害物质排放的评估 第1部分：试验方法的选择 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods |
| EN 1717-2000 |
水设施中防止饮用水被污染的保护及防治回流污染设备的一般要求 |
Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow |
| EN 13526-2001 |
固定源排放物 溶剂使用过程中释放的烟气中总气态有机碳质量浓度的测定 持续火焰电离检测法 |
Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes - Continuous flame ionisation detector method |
| EN 12255-5-1999 |
废水处理厂 第5部分：沉淀池处理 |
Wastewater treatment plants - Part 5: Lagooning processes |
| EN 1093-9-1998 |
机械安全 空气中有害物质排放的评估 第9部分：室内法测定污染物的浓度参数 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method |
| EN 12255-10-2000 |
废水处理厂 第10部分：安全规则 |
Wastewater treatment plants - Part 10: Safety principles |
| EN 45510-4-6-1999 |
发电站设备采购指南 第4部分：.锅炉辅助设备 第6节： 烟气脱硫(DE-SOx)设备 |
Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 6: Flue gas desulphurization (De-SOx) plant |
| EN 1911-1-1998 |
固定源辐射 HCI的人工测定法 第1部分：气体的抽样 |
Stationary source emissions - Manual method of determination of HCl - Part 1: Sampling of gases |
| EN 1189-1996 |
水质 磷含量测定 钼酸铵分光光谱法 |
Water quality - Determination of phosphorus - Ammonium molybdate spectrometric method |
| EN 25667-2-1993 |
水质 取样 第2部分：采样技术指南 |
Water quality; Sampling; Part 2: Guidance on sampling techniques (ISO 5667-2:1991) |
| EN ISO 8178-2-1996 |
往复式内燃机 排放测量 第2部分：气体和颗粒排放物的现场测量 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions at site (ISO 8178-2:1996) |
| EN 1948-1-1996 |
固定源排放 PCDDs/PCDFs的质量浓度测定 第1部分：取样 |
Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs - Part 1: Sampling |
| EN 1899-2-1998 |
水质 n日生化需氧量的测定 第2部分：非稀释样品用方法 |
Water quality - Determination of biochemical oxygen demand after n days (BOD) - Part 2: Method for undiluted samples (ISO 5815:1989, modified) |
| EN 903-1993 |
水质 用测量亚甲基兰指数MBAS测定离子表面活化剂（ISO 7875-1-1984，修改） |
Water quality; Determination of anionic surfactants by measurement of the methylene blue index MBAS (ISO 7875-1:1984, modified) |
| EN ISO 8178-6-2000 |
往复式内燃机 排放测量 第6部分：测量结果和试验报告 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and test (ISO 8178-6:2000) |
| EN 13490-2001 |
机械振动 工业卡车 操作员座位振动的实验室评定和规范 |
Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration |
| EN 12338-1998 |
水质 汞的测定 汞齐化浓缩法 |
Water quality - Determination of mercury - Enrichment methods by amalgamation |
| EN 1233-1996 |
水质 铬测定 原子吸收光谱测定法 |
Water quality - Determination of chromium - Atomic absorption spectrometric methods |
| EN 60645-1-2001 |
测听计 第1部分：纯音测听计 |
Electroacoustics - Audiological equipment - Part 1: Pure-tone audiometers (IEC 60645-1:2001) |
| EN 12919-1999 |
工厂环境 体积流速大于5L/min的化学药剂采样泵 要求与试验方法 |
Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min - Requirements and test methods |
| EN 25663-1993 |
水质 凯氏氮的测定 加硒矿化作用法 |
Water quality; Determination of Kjeldahl nitrogen; Method after mineralization with selenium (ISO 5663:1984) |
| EN 1911-3-1998 |
固定源辐射 HCI的人工测定法 第3部分：吸收溶液分析和计算 |
Stationary source emissions - Manual method of determination of HCl - Part 3: Absorption solutions analysis and calculation |
| EN 1483-1997 |
水质 含汞量的测定 |
Water quality - Determination of mercury |
| EN 13284-1-2001 |
固定源排放物射 灰尘低范围质量浓度的测定 第1部分：手工重量分析法 |
Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method |
| ENV 13936-2001 |
工作场所 用化学试剂量值表示空气中水蒸气和粒子混合物 试验方法和要求 |
Workplace atmospheres - Measurement of chemical agents present as mixtures of airborne particles and vapour - Requirements and test methods |
| EN 45510-4-10-1999 |
发电站设备采购指南 第4-10部分：.锅炉辅助设备 烟道气脱氮(DE-NOx)设备 |
Guide for procurement of power station equipment - Part 4-10: Boiler auxiliaries - Flue gas denitrification (De-NOx) plant |
| EN 13211-2001 |
空气质量 固定源排放物 总汞浓度手工测定法 |
Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury |
| EN 45510-4-1-1999 |
电站设备采购指南 第4部分：锅炉辅助设备 第1节：除尘设备 |
Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 1: Equipment for reduction of dust emissions |
| CR 1404-1994 |
型式试验时气体燃料器具的排放的测定 |
Determination of emissions from appliances burning gaseous fuels during type-testing |
| EN 13649-2001 |
固定源排放物 各气态有机化合物质量浓度的测定 活性炭和溶剂吸附法 |
Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Activated carbon and solvent desorption method |
| ENV 13419-1-1999 |
建筑制品 挥发性有机化合物释放物的测定 第1部分：释放试验间法 |
Building products - Determination of the emission of volatile organic compounds - Part 1: Emission test chamber method |
| EN 25813-1992 |
水质 溶解氧的测定 碘量法 |
Water quality; Determination of dissolved oxygen; Iodometric method (ISO 5813:1983) |
| EN 1420-1-1999 |
有机材料对民用水的影响 管道系统中水气味的测定 第1部分：试验方法 |
Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems - Part 1: Test method |
| EN ISO 8178-1-1996 |
往复式内燃机 排放测量 第1部分：气体和颗粒排放物的试验台测量 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions (ISO 8178-1:1996) |
| EN ISO 8178-4-1996 |
往复式内燃机 排放测量 第4部分：不同用途发动机的试验周期 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Test cycles for different engine applications (ISO 8178-4:1996) |
| EN 13052-1-2001 |
材料对人类生活用水的影响 有机物 管道系统中水的颜色和浊度的测定 第一部分：试验方法 |
Influence of materials on water intended for human consumption - Organic materials; Determination of colour and turbidity of water in piping systems - Part 1: Test method |
| EN 60695-2-11-2001 |
火灾危害试验 第2－11部分：基于灼热／发热丝的试验方法 最终产物的灼热丝易燃性试验 |
Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods; Glow-wire flammability test method for end-products (IEC 60695-2-11:2000) |
| EN 26777-1993 |
水质 亚硝酸盐的测定 分子吸收光度法 |
Water quality; Determination of nitrite; Molecular absorption spectrometric method (ISO 6777:1984) |
| EN 12255-8-2001 |
废水处理厂 第8部分： 污泥处理和存贮 |
Wastewater treatment plants - Part 8: Sludge treatment and storage |
| EN ISO 8467-1995 |
水质 高锰酸盐指数的测定 |
Water quality - Determination of permanganate index (ISO 8467:1993) |
| EN 60695-2-12-2001 |
火灾危害试验 第2－12部分：基于灼热／发热丝的试验方法 材料的灼热丝易燃性试验 |
Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods; Glow-wire flammability test method for materials (IEC 60695-2-12:2000) |
| EN ISO 5961-1995 |
水质 原子吸收光谱法测定镉 |
Water quality - Determination of cadmium by atomic absorption spectrometry (ISO 5961:1994) |
| EN 12255-11-2001 |
废水处理厂 第11部分：一般要求的数据 |
Wastewater treatment plants - Part 11: General data required |
| ENV 60695-2-4/2-1995 |
火灾危害试验 第2部分：试验方法 第4节／活页2：标称５００Ｗ火焰试验和指南 |
Fire hazard testing - Part 2: Test methods - Section 4/sheet 2: 500 W nominal test flames and guidance (IEC 60695-2-4/2:1994) |
| EN ISO 6468-1996 |
水质 有机氯杀虫剂、多氯联苯和氯苯类的测定 液体之间萃取后的气相色谱法 |
Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas chromatographic method after liquid-liquid extraction (ISO 6468:1996) |
| EN 1485-1996 |
水质 可吸收的有机结合卤素的测定 |
Water quality - Determination of adsorbable organically bound halogens (AOX) |
| EN 60695-8-1-2001 |
着火危害试验 第8－1部分：释放热 一般指南 |
Fire hazard testing - Part 8-1: Heat release; General guidance (IEC 60695-8-1:2001) |
| EN 61300-2-36-1997 |
光纤互连器件和无源元件 基本试验和测量程序 第2-36部分：试 验：易燃性(火灾) |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-36: Tests: Flammability (fire hazard) (IEC 61300-2-36:1995) |
| EN ISO 7393-3-2000 |
水质 游离氯和总氯的测定 第3部分：碘量滴定法测总氯 |
Water quality - Determination of free chlorine and total chlorine - Part 3: Iodometric titration method for the determination of total chlorine (ISO 7393-3:1990) |
| EN 1899-1-1998 |
水质 n日生化需氧量的测定 第1部分：添加烯丙基硫脲的稀释和接种方法 |
Water quality - Determination of biochemical oxygen demand after n days (BOD) - Part 1: Dilution and seeding method with allylthiourea addition (ISO 5815:1989, modified) |
| EN 60707-1999 |
固体非金属材料暴露于火焰源的可燃性 试验方法清单 |
Flammability of solid non-metallic materials when exposed to flame sources - List of test methods (IEC 60707:1999) |
| EN ISO 13395-1996 |
水质 用流动分析(CFA 和FIA)和光谱检测法测定水中亚硝酸盐氮和硝酸盐氮及二者的总量 |
Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection (ISO 13395:1996) |
| EN ISO 8192-1995 |
水质 活性污泥对氧消耗量的抑制性试验 |
Water quality - Test for the inhibition of oxygen consumption by activated sludge (ISO 8192:1986) |
| EN ISO 11969-1996 |
水质 砷的测定 原子吸收光谱法(氢化物技术) |
Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique) (ISO 11969:1996) |
| EN 12918-1999 |
水质 采用二氯甲烷萃取和气相色谱分析法测定水中的对硫磷、甲基对硫磷和其它一些有机磷化化合物 |
Water quality - Determination of parathion, parathion-methyl and some other organophosphorus compounds in water by dichloromethane extraction and gas chromatographic anal ysis |
| EN 872-1996 |
水质 悬浮微粒的测定 玻璃纤维过滤器过滤法 |
Water quality - Determination of suspended solids - Method by filtration through glass fibre filters |
| EN ISO 9377-2-2000 |
水质 烃油指数的测定 第2部分：溶剂萃取法与气相色谱分析法 |
Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction an gas chromatography (ISO 9377-2:2000) |
| EN 50132-4-1-2001 |
报警系统 安全设备用CCTV监视系统 第4-1部分：黑白监视器? |
Alarm systems - CCTV surveillance systems for use in security applications - Part 4-1: Black and white monitors |
| EN 27888-1993 |
水质 电导率的测定 |
Water quality; Determination of electrical conductivity (ISO 7888:1985) |
| EN ISO 12020-2000 |
水质 铝的测定 原子吸收光谱法 |
Water quality - Determination of aluminium - Atomic absorption spectrometric methods (ISO 12020:1997) |
| EN 12673-1998 |
水质 水中一些选择氯酚的气相色谱测定 |
Water quality - Gas chromatographic determination of some selected chlorophenols in water |
| EN 12566-1-2000 |
５０ＰＴ以下小型废水处理系统 第1部分：预制化粪池 |
Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks |
| EN ISO 7887-1994 |
水质 色度的检验和测定 |
Water quality - Examination and determination of colour (ISO 7887:1994) |
| ENV ISO 13530-1998 |
水质 水质分析的质量控制指南 |
Water quality - Guide to analytical quality control for water analysis (ISO/TR 13530:1997) |
| EN 13506-2001 |
水质 利用原子荧光光谱法测定汞 |
Water quality - Determination of mercury by atomic fluorescence spectrometry |
| EN 25667-1-1993 |
水质 取样 第1部分：采样方案设计指南 |
Water quality; Sampling; Part 1: Guidance on the design of sampling programmes (ISO 5667-1:1980) |
| EN ISO 9963-1-1995 |
水质 碱度的测定 第1部分：总碱度和合成碱度的测定 |
Water quality - Determination of alkalinity - Part 1: Determination of total and composite alkalinity (ISO 9963-1:1994) |
| EN ISO 7393-1-2000 |
水质 游离氯和总氯的测定 第1部分：N、N－二乙基-1，4-苯二胺滴定法 |
Water quality - Determination of free chlorine and total chlorine - Part 1: Titrimetric method using N,N-diethyl-1,4-phenylenediamine (ISO 7393-1:1985) |
| EN 25814-1992 |
水质 容解氧的测定 电化学探头法 |
Water quality; Determination of dissolved oxygen; Electrochemical probe method (ISO 5814:1990) |
| EN 1484-1997 |
水分析 有机碳(TOC)和溶解的有机碳(DOC)总量测定指南 |
Water analysis - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC) |
| EN 60695-2-10-2001 |
火灾危害试验 第2－10部分：基于灼热／发热丝的试验方法 灼热丝设备及通用试验程序 |
Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods; Glow-wire apparatus and common test procedures (IEC 60695-2-10:2000) |
| EN ISO 7393-2-2000 |
水质 游离氯和总氯的测定 第2部分：N、N－二乙基-1，4-苯二胺比色法 |
Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-diethyl-1,4-phenylenediamine for routine control purposes (ISO 7393-2:1985) |
| EN 60695-2-13-2001 |
火灾危害试验 第2－13部分：基于灼热／发热丝的试验方法 材料的灼热丝起燃性试验? |
Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods; Glow-wire ignitability test method for materials (IEC 60695-2-13:2000) |
| EN 60695-7-1-1995 |
着火危害试验 第7部分：将火中电器产品产生毒性危害降至最小的指南 第1节：总则 |
Fire hazard testing - Part 7: Guidance on the minimization of toxic hazards due to fires involving electrotechnical products - Section 1: General (IEC 60695-7-1:1993) |
| EN ISO 7980-2000 |
水质 钙和镁的测定 原子吸收光谱法 |
Water quality - Determination of calcium and magnesium - Atomic absorption spectrometric method (ISO 7980:1986) |
| EN ISO 11348-2-1998 |
水质 水样对弧菌类光发射抑制影响的测定(发光细菌试验) 第2部分：使用干细菌法 |
Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 2: Method using liquid-dried bacteria (ISO 11348-2:1998) |
| EN 60695-9-1-1999 |
着火危害试验 第9－1部分：火焰的表面扩展 通用指南 |
Fire hazard testing - Part 9-1: Surface spread of flame - General guidance (IEC 60695-9-1:1998) |
| EN ISO 11348-3-1998 |
水质 水样对弧菌类光发射抑制影响的测定(发光细菌试验) 第3部分：使用冻干细菌法 |
Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 3: Method using freeze-dried bacteria (ISO 11348-3:1998) |
| EN 811-1996 |
机械安全 防止被下肢碰撞的危险区安全距离 |
Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs |
| EN 12198-1-2000 |
机械安全 机械发射的辐射产生的危险的评定和减少 第1部分：一般原则 |
Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles |
| EN 27243-1993 |
热环境 根据湿球黑球温度计（WBGT）指数对操业人员热负荷的评价 |
Hot environments; Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature) (ISO 7243:1989) |
| EN 894-1-1997 |
机械安全 显示器和控制致动器设计的人类工程学要求 第1部分：人与显示器和控制致动器相互作用的一般原则 |
Safety of machinery - Ergonomic requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |
| EN 1622-1997 |
水质分析 阈值臭味数(TON)和极限香味值(TFN)的测定 |
Water analysis - Determination of the threshold odour number (TON) and threshold flavour number (TFN) |
| EN 13478-2001 |
机械安全性 防火和保护 |
Safety of machinery - Fire prevention and protection |
| EN 28996-1993 |
人类工效学 代谢热量的测定 |
Ergonomics; Determination of metabolic heat production (ISO 8996:1990) |
| EN 894-2-1997 |
机械安全 显示器和控制致动器设计的人类工程学要求 第2部分：显示器 |
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays |
| EN 28265-1994 |
水质 浅淡水中多石底层上的底栖大型无脊椎动物定量取样器的设计和使用 |
Water quality; design and use of quantitative samplers for benthic macro-invertebrates on stony substrata in shallow freshwaters (ISO 8265:1988) |
| EN 61310-1-1995 |
机械安全 指示、标记和驱动 第1部分：可视、可听和可触觉信号要求 |
Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, auditory and tactile signals (IEC 61310-1:1995) |
| EN 457-1992 |
机械安全 听觉危险信号 一般要求、设计和测试（ISO 7731-1986，修改） |
Safety of machinery; Auditory danger signals; General requirements, design and testing (ISO 7731:1986, modified) |
| EN 894-3-2000 |
机械安全 显示器和控制致动器设计的人类工程学要求 第3部分：控制致动器 |
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
| EN ISO 7346-2-1997 |
水质 对淡水鱼(真骨总目、鲤科)急性致死物质毒性的测定 第2部分：半静态法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 2: Semi-static method (ISO 7346-2:1996) |
| EN 61310-3-1999 |
机械安全 指示、标记和驱动 第3部分：驱动器的位置和操作要求 |
Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators (IEC 61310-3:1999) |
| EN 981-1996 |
机械安全 危险信号的视听系统 |
Safety of machinery - System of auditory and visual danger and information signals |
| EN ISO 15061-2001 |
水质 不溶溴酸盐含量的测定 离子液相色谱法 |
Water quality - Determination of dissolved bromate - Method by liquid chromatography of ions (ISO 15061:2001) |
| EN 61496-1-1997 |
机械安全 电敏保护设备 第1部分：一般要求和试验 |
Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests (IEC 61496-1:1997) / Note: Includes Corrigendum to french version of September 2001 |
| EN ISO 7346-3-1997 |
水质 对淡水鱼(真骨总目、鲤科)急性致死物质毒性的测定 第3部分：直流法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 3: Flow-through method (ISO 7346-3:1996) |
| EN ISO 15682-2001 |
水质 用流量分析(CFA和FIA)法和光度或电势检查法测定氯化物 |
Water quality - Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection (ISO 15682:2000) |
| EN ISO 9886-2001 |
热疲劳的生理学测量评价 |
Evaluation of thermal strain by physiological measurements (ISO 9886:1992) |
| CR ISO 14638-1996 |
产品几何量技术规范（GPS） 总体规划（ISO/TR 14638:1995） |
Geometrical product specification (GPS) - Masterplan (ISO/TR 14638:1995) |
| EN ISO 14402-1999 |
水质 流动分析法(FIA和CFA)测定苯酚指数 |
Water quality - Determination of phenol index by flow analysis (FIA and CFA) (ISO 14402:1999) |
| EN 953-1997 |
机械安全 防护装置 固定和移动防护装置构造和设计的一般要求 |
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| EN 547-1-1996 |
机械安全 人体测量 第1部分：确定整个人体进入机械设备通道所需尺寸的原则 |
Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
| CR 13582-1999 |
热电偶装置 一些关于热电偶选择、安装和操作指南 |
Heat meter installation - Some guidelines for selecting, installation and operation of heat meters |
| EN ISO 14911-1999 |
水质 离子色谱法测定水和废水中溶解性锂离子、钠离子、铵离子、钾离子、锰离子、钙离子、镁离子、锶离子和 |
Water quality - Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography - Method for water and waste water (ISO 14911:1998) |
| EN 547-2-1996 |
机械安全 人体测量 第2部分：确定进入通道所需尺寸的原则 |
Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
| HD 587 S1-1993 |
仪表变压器 电压为52 kV及以下的三相电压变压器 |
Instrument transformers; Three-phase voltage transformers for voltage levels having U up to 52 kV |
| EN ISO 10634-1995 |
水质 在含水介质中生物降解能力后续评估用贫水可溶性有机化合物的制备和处理指南 |
Water quality - Guidance for the preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueous medium (ISO 10634:1995) |
| EN 1088-1995 |
机械安全 和保护装置相连的锁紧装置 设计和选择的原则 |
Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| EN 574-1996 |
机械安全 双柄控制设备 功能状况 设计原则 |
Safety of machinery - Two-hand control devices - Functional aspects - Principles for design |
| EN ISO 7027-1999 |
水质 浊度的测定 |
Water quality - Determination of turbidity (ISO 7027:1999) |
| EN ISO 11348-1-1998 |
水质 水样对弧菌类光发射抑制影响的测定(发光细菌试验) 第1部分：使用新制备细菌法 |
Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria (ISO 11348-1:1998) |
| EN 1127-1-1997 |
爆炸性气体 爆炸防止和防护 第1部分：.基本概念和方法 |
Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| EN ISO 7346-1-1997 |
水质 对淡水鱼(真骨总目、鲤科)急性致死物质毒性的测定 第1部分：静态法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae) - Part 1: Static method (ISO 7346-1:1996) |
| EN 547-3-1996 |
机械安全 人体测量 第3部分：人体测量数据 |
Safety of machinery - Human body measurements - Part 3: Anthropometric data |
| EN 1760-2-2001 |
机械安全 压敏防护装置 第2部分：压敏边缘和压敏棒设计和试验的一般原则 |
Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| EN 418-1992 |
机械安全 功能方面的紧急停止设备 设计原则 |
Safety of machinery; Emergency stop equipment, functional aspects; Principles for design |
| EN ISO 7730-1995 |
热环境人类工效学 对热舒适度的PMV和PPD指标和规格的测定 |
Moderate thermal environments - Determination of the PMV and PPD indices and specification of the conditions for thermal comfort (ISO 7730:1994) |
| EN 1837-1999 |
机械的安全 机械的整体照明 |
Safety of machinery - Integral lighting of machines |
| EN 614-2-2000 |
机械安全 人类工程学设计原则 第2部分：机械设计和工作任务间的相互作用 |
Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks |
| EN 626-1-1994 |
机械安全 减少机械产生的危险物质对健康造成的危害 第1部分：机械制造原则和规范 |
Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers |
| EN 349-1993 |
机械安全 避免挤压人体各部分的最小间隙 |
Safety of machinery; Minimum gaps to avoid crushing of parts of the human body |
| EN 1037-1995 |
机械安全 避免意外起动 |
Safety of machinery - Prevention of unexpected start-up |
| EN 626-2-1996 |
机械安全 减少机械产生的危险物质对健康造成的危害 第2部分：检验程序的指导方法 |
Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures |
| EN 61310-2-1995 |
机械安全 指示、标记和驱动 第2部分：标记要求 |
Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking (IEC 61310-2:1995) |
| ENV 1630-1999 |
窗、门、百叶窗 防盗性能 测定防人为盗窃企图能力的试验方法 |
Windows, doors, shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts |
| EN 61496-3-2001 |
机械安全 电敏保护设备 第3部分：易引起漫反射的有源光电子保护器件设备的特殊要求 |
Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) (IEC 61496-3:2001) |
| EN ISO 14122-2-2001 |
机器安全 接近机器的固定方式 第2部分：工作平台和通道 |
Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2001) |
| EN 954-1-1996 |
机械安全 控制系统部件的安全 第1部分：设计的一般原则 |
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design |
| EN ISO 14122-1-2001 |
机器安全 接近机器的固定方式 第1部分：两种级别的固定方式的选择 |
Safety of machinery - Permanent means of access to machinery - Part 1: Choice of a fixed means of access between two levels (ISO 14122-1:2001) |
| CR 954-100-1999 |
机械安全 控制系统安全相关部件 第100部分： EN 954-1:1996使用和应用指南 |
Safety of machinery - Safety-related parts of control systems - Part 100: Guide on the use and application of EN 954-1:1996 |
| EN 50130-5-1998 |
报警系统 第5部分：环境试验方法 |
Alarm systems - Part 5: Environmental test methods |
| EN 1050-1996 |
机械安全 危害评估原则 |
Safety of machinery - Principles for risk assessment |
| EN ISO 14122-3-2001 |
机器安全 接近机器的固定方式 第3部分：楼梯、梯子和护栏 |
Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001) |
| EN 26189-1991 |
声学 用于听力保护的纯音气导阀听力测定 |
Acoustics; pure tone air conduction threshold audiometry for hearing conservation purposes (identical with ISO 6189:1983) |
| EN 50132-2-1-1997 |
报警系统 CCTV监视系统 第2-1部分：黑白摄像机 |
Alarm systems - CCTV surveillance systems for use in security applications - Part 2-1: Black and white cameras |
| EN 60204-1-1997 |
机械安全 机械的电气设备 第1部分：一般要求? |
Safety of machinery - Electrical equipment of machines - Part 1: General requirements (IEC 60204-1:1997) |
| EN 50073-1999 |
燃气或氧气检验和测量装置的选择安装使用和维修指南 |
Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen |
| EN 60318-1-1998 |
电声学 人的头和耳模拟器 第1部分：超级听力耳机校正用耳模拟器 |
Electroacoustics - Simulators of human head and ear - Part 1: Ear simulator for the calibration of supra-aural earphones (IEC 60318-1:1998) |
| EN 50133-2-1-2000 |
报警系统 安全使用的存取控制系统 第2-1部分：元件的基本要求 |
Alarm systems - Access control systems for use in security applications - Part 2-1: General requirements for components |
| EN ISO 10253-1998 |
水质 用Skeletonema costatum 和Phaeodactylum进行海洋藻类生长抑制试验 |
Water quality - Marine algal growth inhibition test with Skeletonema costatum and Phaeodactylum tricornutum (ISO 10253:1995) |
| EN 27828-1994 |
水质 生物采样 水生底栖大型无脊椎动物手网采样方法指南 |
Water quality; Methods of biological sampling; Guidance on handnet sampling of aquatic benthic macro-invertebrates (ISO 7828:1985) |
| EN 60645-2-1997 |
测听计 第2部分：语音测听装置 |
Audiometers - Part 2: Equipment for speech audiometry (IEC 60645-2:1993) |
| EN 50133-7-1999 |
报警系统 安全使用的存取控制系统 第7部分：应用导则 |
Alarm systems - Access control systems for use in security applications - Part 7: Application guidelines |
| EN 294-1992 |
机械安全 避免上肢可到达危险区域的安全距离 |
Safety of machinery; safety distances to prevent danger zones being reached by the upper limbs |
| EN 28692-1993 |
水质 用绿藻类栅薄属和月牙藻属进行的淡水藻类生长抑制试验 |
Water quality; Fresh water algal growth inhibition test with Scenedesmus subspicatus and Selenastrum capricornutum (ISO 8692:1989) |
| EN 999-1998 |
机械安全 有关与人体部分接近速度的保护设备的位置 |
Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body |
| EN 28662-1-1992 |
便携式手提动力工具 手柄振动测量 第1部分：总则 |
Hand-held portable power tools; Measurement of vibrations at the handle; Part 1: General (ISO 8662-1:1988) |
| EN 842-1996 |
机械安全 可视危险信号 一般要求、设计和测试 |
Safety of machinery - Visual danger signals - General requirements, design and testing |
| EN ISO 5667-16-1998 |
水质 采样 第16部分：水样生物试验方法指南 |
Water quality - Sampling - Part 16: Guidance on biotesting of samples (ISO 5667-16:1998) |
| EN 60645-4-1995 |
测听计 第4部分：高频声学设备 |
Audiometers - Part 4: Equipment for extended high-frequency audiometry (IEC 60645-4:1994) |
| EN 60204-11-2000 |
机械的安全 机械的电气设备 第11部分：交流电压1000V或直流电压1500V以上和36kV以下高压设备的要求 |
Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV (IEC 60204-11:2000) |
| EN 1746-1998 |
机械安全 安全标准的噪声条款编写指南 |
Safety of machinery - Guidance for the drafting of the noise clauses of safety standards |
| EN ISO 9391-1995 |
水质 深水中大型无脊椎生物的采样 群落法定性和定量采样器使用方法指南 |
Water quality - Sampling in deep waters for macro-invertebrates - Guidance on the use of colonization, qualitative and quantitative samplers (ISO 9391:1993) |
| EN ISO 5349-1-2001 |
机械振动 人体手传振动的测量与评估 第1部分：一般要求 |
Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements (ISO 5349-1:2001) |
| EN ISO 389-1-2000 |
声学 校正听力设备的基准零级 第1部分：纯音和压耳式耳机用的基准等效阈声压级 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones (ISO 389-1:1998) |
| EN ISO 8662-7-1997 |
便携式手提动力工具 手柄振动测量 第7部分：具有冲击、脉冲或棘轮作用力的扳手、螺丝刀和拧螺母机 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action (ISO 8662-7:1997) |
| EN ISO 5349-2-2001 |
机械振动 人体手传振动的测量与评估 第2部分：在车间测量的实用指南 |
Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace (ISO 5349-2:2001) |
| EN ISO 7096-2000 |
土方机械 司机座椅振动的实验室测定 |
Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000) |
| EN ISO 389-3-1998 |
声学 校正听力设备的基准零级 第3部分：骨振器纯声基准等效 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 3: Reference equivalent threshold force levels for pure tones and bone vibrators (ISO 389-3:1994) |
| EN ISO 8662-4-1995 |
便携式手提动力工具 手柄振动测量 第4部分：磨床 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders (ISO 8662-4:1994) |
| EN ISO 8662-9-1996 |
便携式手提动力工具 手柄振动测量 第9部分：汽锤 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 9: Rammers (ISO 8662-9:1996) |
| EN ISO 8662-14-1996 |
便携式手提动力工具 手柄振动测量 第14部分：采石工具和针束除锈机 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 14: Stone-working tools and needle scalers (ISO 8662-14:1996) |
| EN ISO 8662-10-1998 |
便携式手提动力工具 手柄振动测量 第10部分：冲剪与剪切 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 10: Nibblers and shears (ISO 8662-10:1998) |
| EN ISO 8662-6-1995 |
便携式手提动力工具 手柄振动测量 第6部分：冲击钻 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 6: Impact drills (ISO 8662-6:1994) |
| EN ISO 8662-13-1997 |
便携式手提动力工具 手柄振动测量 第13部分：模具研磨机 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders (ISO 8662-13:1997) |
| EN ISO 8662-12-1997 |
便携式手提动力工具 手柄振动测量 第12部分：往复式锯和锉以摆动或旋转式锯 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action (ISO 8662-12:1997) |
| EN ISO 13753-1998 |
机械振动与冲动 手臂振动 手臂系统为负载时弹性材料振动传递率的测量方法 |
Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998) |
| EN ISO 10819-1996 |
机械振动与冲击 手臂振动 手掌戴手套时对振动传递率的测量和评定方法 |
Mechanical vibration and shock - Hand-arm vibration - Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:1996) |
| EN ISO 9241-9-2000 |
办公用视觉显示终端(VDTs)的人类工效学要求 第9部分：非键盘输入设备要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 9: Requirements for non-keyboard input devices (ISO 9241-9:2000) |
| CR 1030-2-1995 |
手臂振动 减少振动伤害指南 第2部分：工作场所管理措施 |
Hand-arm vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace |
| CR 1030-1-1995 |
手臂振动 减少振动伤害指南 第1部分：机械设计工程学方法 |
Hand-arm vibration - Guidelines for vibration hazards reduction - Part 1: Engineering methods by design of machinery |
| EN ISO 9241-12-1998 |
办公用视觉显示终端(VDTs)的人类工效学要求 第12部分：信息表达 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 12: Presentation of information (ISO 9241-12:1998) |
| CR 12349-1996 |
机械振动 振动对人体健康的影响指南 |
Mechanical vibration - Guide to the health effects of vibration on the human body |
| EN ISO 389-2-1996 |
声学 校正听力设备的基准零级 第2部分：纯音和插入式耳机用的基准等效阈声压级 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 2: Reference equivalent treshold sound pressure levels for pure tones and insert earphones (ISO 389-2:1994) |
| EN ISO 13090-1-1998 |
机械振动与冲击 试验及与人有关的实验安全方面指南 第1部分：机械振动和反复冲击下的人体试验 |
Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people - Part 1: Exposure to whole-body mechanical vibration and repeated shock (ISO 13090-1:1998) |
| ENV 26385-1990 |
工作系统设计的人类工效学原则 |
Ergonomic principles of the design of work systems (ISO 6385:1981) |
| EN ISO 389-7-1998 |
声学 校正听力设备的基准零级 第7部分：自由场和扩散场收听条件下的基准听阈 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions (ISO 389-7:1996) |
| EN 1568-2-2000 |
灭火介质 浓缩泡沫 第2部分：用于不溶水的液体表面的高度膨胀的浓缩泡沫规范 |
Fire extinguishing media - Foam concentrates - Part 2: Specification for high expansion foam concentrates for surface application to water-immiscible liquids |
| EN 60645-3-1995 |
测听计 第3部分：声学和耳神经学用短持续试验信号 |
Audiometers - Part 3: Auditory test signals of short duration for audiometric and neuro-otological purposes (IEC 60645-3:1994) |
| EN 29241-2-1993 |
办公用视觉显示终端（VDTs）的人类工效学要求 第2部分：任务要求指南 |
Ergonomic requirements for office work with visual display terminals (VDTs); Part 2: guidance on task requirements (ISO 9241-2:1992) |
| EN 50132-5-2001 |
报警系统 CCTV监视系统 第5部分：视频传输? |
Alarm systems - CCTV surveillance systems for use in security applications - Part 5: Video transmission |
| EN 13202-2000 |
温度环境人机工程学 可接触热表面温度 根据EN 563在生产标准中设定表面温度限值的指南 |
Ergonomics of the thermal environment - Temperatures of touchable hot surfaces - Guidance for establishing surface temperature limit values in production standards with the aid of EN 563 |
| EN ISO 389-4-1998 |
声学 校正听力设备的基准零级 第4部分：窄带掩蔽噪声基准级 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 4: Reference levels for narrow-band masking noise (ISO 389-4:1994) |
| EN 12613-2001 |
具有可视特性的地下电缆和管线用塑料报警装置 |
Plastics warning devices for underground cables and pipelines with visual characteristics |
| EN ISO 3411-1999 |
土方机械 司机的身体尺寸与司机的最小活动空间 |
Earth-moving machinery - Human physical dimensions of operators and minimum operator space envelope (ISO 3411:1995) |
| EN 60447-1993 |
人机界面（MMI） 操作原则 |
Man-machine interface (MMI); Actuating principles (IEC 60447:1993) |
| EN ISO 389-5-1999 |
声学 校正听力设备的基准零级 第5部分：8kHz－16kHz频率范围内的纯音的等效阈声压级 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz (ISO/TR 389-5:1998) |
| EN 50131-1-1997 |
报警系统 干扰系统 第1部分：一般要求 |
Alarm systems - Intrusion systems - Part 1: General requirements |
| EN ISO 7250-1997 |
用于技术设计的人体测量基础项目 |
Basic human body measurements for technological design (ISO 7250:1996) |
| EN ISO 9241-7-1998 |
办公用视觉显示终端(VDTs)的人类工效学要求 第7部分：反射显示 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 7: Requirements for display with reflections (ISO 9241-7:1998) |
| EN 50131-6-1997 |
报警系统 干扰系统 第6部分：电力供应 |
Alarm systems - Intrusion systems - Part 6: Power supplies |
| EN 50132-7-1996 |
报警系统 安全设备用CCTV监测系统 第7部分：安全设备用CCTV监测系统 应用指南 |
Alarm systems - CCTV surveillance systems for use in security applications - Part 7: Application guidelines |
| EN ISO 9241-5-1999 |
办公用视觉显示终端(VDTs)的人类工效学要求 第5部分：工作台布置及位置要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 5: Workstation layout and postural requirements (ISO 9241-5:1998) |
| EN 50133-1-1996 |
报警系统 安全使用的存取控制系统 第1部分：系统要求 |
Alarm systems - Access control systems for use in security applications - Part 1: System requirements |
| EN ISO 9241-8-1997 |
办公用视觉显示终端(VDTs)的人类工效学要求 第8部分：显示颜色要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 8: Requirements for displayed colours (ISO 9241-8:1997) |
| EN ISO 8662-8-1997 |
便携式手提动力工具 手柄振动测量 第8部分：抛光机和旋转式轨道和特殊轨道磨光机 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 8: Polishers and rotary, orbital and random orbital sanders (ISO 8662-8:1997) |
| EN 50134-2-1999 |
报警系统 公共报警系统 第2部分：触发设备 |
Alarm systems - Social alarm systems - Part 2: Trigger devices |
| EN ISO 9241-10-1996 |
办公用视觉显示终端(VDTs)的人类工效学要求 第10部分：对话原理 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 10: Dialogue principles (ISO 9241-10:1996) |
| EN ISO 9241-6-1999 |
办公用视觉显示终端(VDTs)的人类工效学要求 第6部分：工作环境指南 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 6: Guidance on the work environment (ISO 9241-6:1999) |
| EN ISO 9241-11-1998 |
办公用视觉显示终端(VDTs)的人类工效学要求 第11部分：可用性指南 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 11: Guidance on usability (ISO 9241-11:1998) |
| EN ISO 9241-13-1998 |
办公用视觉显示终端(VDTs)的人类工效学要求 第13部分：用户指南 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 13: User guidance (ISO 9241-13:1998) |
| EN ISO 9241-14-1999 |
办公用视觉显示终端(VDTs)的人类工效学要求 第14部分：菜单对话 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 14: Menu dialogues (ISO 9241-14:1997) |
| EN ISO 9241-15-1997 |
办公用视觉显示终端(VDTs)的人类工效学要求 第15部分：命令对话 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 15: Command dialogues (ISO 9241-15:1997) |
| EN 54-3-2001 |
火灾探测和火灾警报系统 第3部分：火灾警报设备 发声器 |
Fire detection and fire alarm systems - Part 3: Fire alarm devices; Sounders |
| EN 50340-2001 |
液压电缆切割器 在额定电压高达AC 30 kV的电气设施上使用的装置 |
Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV / Note: Includes Corrigendum of February 2002 |
| ENV 61111-2001 |
电工用绝缘材料垫 |
Matting of insulating material for electrical purposes (IEC 61111:1992 + Corrigendum 2000, modified) |
| EN 54-7-2000 |
火灾探测和火灾警报系统 第7部分：烟雾探测器 使用散射光、透射光或电离的点探测器 |
Fire detection and fire alarm systems - Part 7: Smoke detectors; Point detectors using scattered light, transmitted light or ionization |
| EN 1102-1995 |
纺织品和纺织产品 燃烧性能 窗帘和帷幕 垂直排列试样火焰扩散测定的详细程序 |
Textiles and textile products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the flame spread of vertically oriented specimens |
| EN 1568-3-2000 |
灭火介质 浓缩泡沫 第3部分：用于不溶水的液体表面的低度膨胀的浓缩泡沫规范 |
Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids |
| EN 54-11-2001 |
火灾探测和火灾警报系统 第11部分：人工呼叫点 |
Fire detection and fire alarm systems - Part 11: Manual call points |
| EN 1846-2-2001 |
消防车和救援车 第2部分：通用要求 安全和性能 |
Firefighting and rescue service vehicles - Part 2: Common requirements; Safety and performance |
| EN 50267-2-2-1998 |
在着火条件下电缆的一般测试方法 电缆材料燃烧过程中放出气体的试验 第2-2部分：程序 通过测量 pH 值和 |
Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity |
| EN 671-1-2001 |
固定式灭火系统 水龙带系统 第1部分：具有半刚性水龙带的带盘 |
Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose |
| EN 1866-1998 |
移动灭火器 |
Mobile fire extinguishers |
| EN 1869-1997 |
灭火装置 |
Fire blankets |
| ENV 14028-2001 |
液体比重测定法 助推型流速表的应用和校准 |
Hydrometry - The application of propeller-type current meters and their calibration |
| EN 50268-2-1999 |
在燃烧条件下电缆的一般试验方法 在规定条件下电缆燃烧烟密度测量 第2部分：程序 |
Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 2: Procedure |
| EN 12065-1997 |
液化天然气设备和安装 为产生液化天然气火焰灭火粉末及产生中高膨胀泡沫的泡沫浓缩物的试验 |
Installations and equipment for liquefied natural gas - Testing of foam concentrates designed for generation of medium and high expansion foam and of extinguishing powders used on liquefied natural gas fires |
| EN 1568-4-2000 |
灭火介质 浓缩泡沫 第4部分：用于易可溶水的液体表面的低度膨胀的浓缩泡沫规范 |
Fire extinguishing media - Foam concentrates - Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids |
| EN 27201-2-1994 |
灭火剂 卤代烷 第2部分：安全处置和储运过程的实施规则 |
Fire protection - Fire extinguishing media - Halogenated hydrocarbons - Part 2: Code of practice for safe handling and transfer procedures (ISO 7201-2:1991) |
| EN 25923-1993 |
消防 灭火剂 二氧化碳 |
Fire protection; Fire extinguishing media; Carbon dioxide (ISO 5923:1989) |
| EN 694-2001 |
灭火水龙带 固定系统用半刚性水龙带 |
Fire-fighting hoses - Semi-rigid hoses for fixed systems |
| EN 27201-1-1994 |
灭火剂 卤代烷 第1部分：哈龙1211和哈龙1301的规范 |
Fire protection - Fire extinguishing media - Halogenated hydrocarbons - Part 1: Specifications for halon 1211 and halon 1301 (ISO 7201-1:1989) |
| EN 54-1-1996 |
火灾探测和火灾警报系统 第1部分：介绍 |
Fire detection and fire alarm systems - Part 1: Introduction |
| EN 50267-2-1-1998 |
在着火条件下电缆的一般测试方法 电缆材料燃烧过程中放出气体的试验 第2-1部分：程序 氢卤酸气体量的测 |
Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-1: Procedures - Determination of the amount of halogen acid gas |
| ENV 1993-1-2-1995 |
欧洲法典 3：钢结构设计 第1-2部分： 一般规则 结构的防火设计 |
Eurocode 3 - Design of steel structures - Partie 1-2: General rules - Structural fire design |
| EN 60512-20-2-2000 |
电子设备用机电元件 基本试验规程和测量方法 第20－2部分：试验20b:易燃性试验 防火性 |
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test 20b: Flammability tests; Fireproofness (IEC 60512-20-2:2000) |
| ENV 1994-1-2-1994 |
欧洲法典 4：钢和混凝土结构的复合设计 第1-2部分：一般规则 结构防火设计(包括技术勘误1：1995) |
Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design (including Technical Corrigendum 1:1995) |
| EN 60695-1-1-2000 |
着火危险试验 第1-1部分：电工产品着火危险评定指南 总指南 |
Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines (IEC 60695-1-1:1999 + Corrigendum 2000) |
| EN 12094-6-2000 |
固定式消防系统 气体灭火系统的部件 第6部分：对CO2系统的非电阻塞装置的要求及试验方法 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices for CO systems |
| EN 404-1993 |
自救式呼吸保护设备 自救式过滤器 要求、测试和标志 |
Respiratory protective for self-rescue; filter self-rescuer; requirements, testing, marking |
| EN 148-3-1999 |
呼吸保护装置 面罩用螺纹 第3部分：螺纹连接M45×3 |
Respiratory protective devices - Threads for facepieces - Part 3: Thread connection M 45x3 |
| EN 12259-2-1999 |
固定消防系统 喷水器和喷水系统构件 第2部分：湿式报警阀组件 |
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies |
| EN 405-2001 |
呼吸保护设备 防气体或防气体和颗粒的阀滤式半面罩 要求、测试和标志 |
Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking |
| EN 149-2001 |
呼吸保护装置 防微粒用过滤半面罩 要求、测试、标志 |
Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking |
| EN 12416-1-2001 |
固定消防系统 粉末系统 第1部分：构件的要求和试验方法 |
Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components |
| EN 54-5-2000 |
火灾探测和火灾警报系统 第5部分：热探测器 点探测器 |
Fire detection and fire alarm systems - Part 5: Heat detectors; Point detectors |
| EN 250-2000 |
呼吸设备 开路独立压缩空气潜水器具 要求、测试、标志 |
Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing, marking |
| EN 1021-1-1993 |
家具 装璜家具易燃性的评估 第1部分：火源 燃着的香烟 |
Furniture; Assessment of the ignitability of upholstered furniture; part 1: ignition source: smouldering cigarette (ISO 8191-1:1987, modified) |
| EN 720-2-1996 |
可移动气瓶 气体和气体混合物 第2部分：气体和气体混合物的可燃性和氧化能力测定 |
Transportable gas cylinders - Gases and gas mixtures - Part 2: Determination of flammability and oxidizing ability of gases and gas mixtures |
| EN 403-1993 |
自救式呼吸保护设备 火灾中自救用带罩过滤装置 要求、测试和标志 |
Respiratory protective devices for self-rescue; filtering devices with hood for self-rescue from fire; requirements, testing, marking |
| EN 1101-1995 |
纺织品和纺织产品 燃烧性能 窗帘和帷幕 垂直排列试样易燃性(小火焰)测定的详细程序 |
Textiles and textile products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the ignitability of vertically oriented specimens (small flame) |
| EN 269-1994 |
呼吸保护装置 包括护罩的动力推动新鲜空气软管呼吸器 要求、测试、标志 |
Respiratory protective devices - Powered fresh air hose breathing apparatus incorporating a hood - Requirements, testing, marking |
| EN ISO 7822-1999 |
玻璃纤维增强塑料 孔隙率的测定 烧失量、机械粉碎和静态计数法? |
Textile glass reinforced plastics - Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods (ISO 7822:1990) |
| EN ISO 3582-2000 |
软质泡沫聚合材料 小试样对小火焰水平方向燃烧特性的实验室评估 |
Flexible cellular polymeric materials - Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame (ISO 3582:2000) |
| EN 1365-1-1999 |
承重构件的耐火试验 第1部分：墙 |
Fire resistance tests for loadbearing elements - Part 1: Walls |
| EN ISO 8030-1997 |
橡胶和塑料软管 易燃烧性试验方法 |
Rubber and plastics hoses - Method of test for flammability (ISO 8030:1995) |
| EN ISO 4589-1-1999 |
塑料 通过氧指数测定其燃烧性 第1部分：指南 |
Plastics - Determination of burning behaviour by oxygen index - Part 1: Guidance (ISO 4589-1:1996) |
| EN 148-2-1999 |
呼吸保护装置 面具用螺纹 第2部分：中心螺纹连接 |
Respiratory protective devices - Threads for facepieces - Part 2: Centre thread connection |
| EN 1365-2-1999 |
承重钩件的耐火试验 第2部分：地板和屋顶 |
Fire resistance tests for loadbearing elements - Part 2: Floors and roofs |
| EN 671-2-2001 |
固定式灭火系统 水龙带系统 第2部分：具有平铺水龙带的水龙带系统 |
Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose |
| EN ISO 4589-3-1996 |
塑料 通过氧指数测定其燃烧性 第3部分：高温试验 |
Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test (ISO 4589-3:1996) |
| EN 61479-2001 |
带电作业 绝缘材料制软导线外皮(线软管) |
Live working - Flexible conductor covers (line hoses) of insulating material (IEC 61479:2001) |
| EN 1827-1999 |
呼吸保护装置 防止气体或气体和微粒或仅防颗粒的无吸入阀和带可分离过滤器的半掩面罩 要求、试验和标记 |
Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking |
| EN ISO 5659-1-1999 |
塑料 烟雾产生 第1部分：光密度测定指南 |
Plastics - Smoke generation - Part 1: Guidance on optical-density testing (ISO 5659-1:1996) |
| EN 597-1-1994 |
家具 床垫和装饰床具着火性评定 第1部分：点火源 阴燃卷烟 |
Furniture - Assessment of the ignitability of mattresses and upholstered bed bases - Part 1: Ignition source: Smouldering cigarette |
| EN 61685-2001 |
超声学 流量计量系统 流量试验目标 |
Ultrasonics - Flow measurement systems - Flow test object (IEC 61685:2001) |
| EN 12094-7-2000 |
固定式消防系统 气体灭火系统的部件 第7部分：对CO2系统的喷嘴的要求及试验方法 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO systems |
| EN ISO 12952-3-1998 |
纺织品 床上用品的燃烧性能 第3部分：小点火源的可点燃性的一般试验方法 |
Textiles - Burning behaviour of bedding items - Part 3: General test methods for the ignitability by a small open flame (ISO 12952-3:1998) |
| EN 12094-5-2000 |
固定式消防系统 气体灭火系统的部件 第5部分：高、低压选择阀及其CO2系统驱动器触发要求及试验方法 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators for CO systems |
| EN 1047-1-1996 |
安全存储装置 耐火试验方法和分类 第1部分： 数据柜 |
Secure storage units - Classification and methods of test for resistance to fire - Part 1: Data cabinets |
| EN 1047-2-1999 |
安全存储装置 耐火试验方法和分类 第2部分：数据室和数据容器 |
Secure storage units - Classification and methods of test for resistance to fire - Part 2: Data rooms and data containers |
| HD 541 S1-1991 |
测定固体电绝缘材料暴露于电热丝时的可燃性的试验方法 |
Methods of test for the determination of the ignitability of solid electrical insulating materials when exposed to electrically heated wire sources (IEC 60829:1988, modified) |
| EN 12094-8-1998 |
固定式消防系统 气体灭火系统的部件 第8部分：二氧化碳设备用挠性连接器的要求及试验方法 |
Fixed fire fighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for flexible connectors for CO systems |
| EN 1624-1999 |
纺织和纺织制品 工业和技术纺织品的燃烧特性 垂直向样品火焰蔓延性的测定程序 |
Textiles and textile products - Burning behaviour of industrial and technical textiles - Procedure to determine the flame spread of vertically oriented specimens |
| EN 1103-1995 |
纺织品和纺织产品 服装织物 服装织物燃烧性能测定的详细程序 |
Textiles - Burning behaviour - Fabrics for apparel - Detailed procedure to determine the burning behaviour of fabrics for apparel |
| EN 371-1992 |
呼吸保护设备 抗低沸点有机化合物的AX气体过滤器和综合过滤器 要求、测试、标志 |
Respiratory protective devices; AX gas filters and combined filters against low boiling organic compounds; requirements, testing, marking |
| EN 12416-2-2001 |
固定消防系统 粉末系统 第2部分：设计、制造和维护/注：包括第3、6、24和36页的勘误表 |
Fixed firefighting systems - Powder systems - Part 2: Design, construction and maintenance / Note: Includes Corrigendum of page 3, 6, 24 and page 36 |
| EN ISO 6941-1995 |
纺织织物 燃烧性能 垂直向样品火焰蔓延性的测定 |
Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens (ISO 6941:1984, including Amendment 1:1992) |
| EN 60695-2-4/0-1993 |
火灾危害试验 第2部分：试验方法 第4节／活页0：扩散型和混合型火焰试验方法 |
Fire hazard testing; Part 2: Test methods; Section 4/sheet 0: Diffusion type and premixed type flame test methods (IEC 60695-2-4/0:1991) |
| EN ISO 12952-1-1998 |
纺织品 床上用品的燃烧性能 第1部分：由发烟燃烧的香烟为点火源的可点燃性的一般试验方法 |
Textiles - Burning behaviour of bedding items - Part 1: General test methods for the ignitability by a smouldering cigarette (ISO 12952-1:1998) |
| EN ISO 12138-1996 |
纺织品 织物燃烧试验前的家庭洗涤方法 |
Textiles - Domestic laundering procedures for textile fabrics prior to flammability testing (ISO 12138:1996) |
| EN 372-1992 |
呼吸保护设备 抗特定化合物的SX气体过滤器和综合过滤器 要求、测试、标志 |
Respiratory protective devices; SX gas filters and combined filters against specific named compounds; requirements, testing, marking |
| EN 357-2000 |
建筑物用玻璃 带透明或半透明玻璃产品的防火玻璃元件 防火性分类 |
Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance |
| EN 597-2-1994 |
家具 床垫和装饰床具着火性评定 第2部分：点火源 火柴火焰 |
Furniture - Assessment of the ignitability of mattresses and upholstered bed bases - Part 2: Ignition source: Match flame equivalent |
| EN ISO 15541-2001 |
船舶与造船技术 软管组件耐火性 试验台技术要求 |
Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench (ISO 15541:1999) |
| EN ISO 4589-2-1999 |
塑料 通过氧指数测定其燃烧性 第2部分：室温试验 |
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:1996) |
| EN 1021-2-1993 |
家具 装潢家具易燃性的评估 第2部分：火源 火柴的火焰当量 |
Furniture; assessment of the ignitability of upholstered furniture; part 2: ignition source: match flame equivalent (ISO 8191-2:1988, modified) |
| ENV 1363-3-1998 |
耐火试验 第3部分：炉子性能检验 |
Fire resistance tests - Part 3: Verification of furnace performance |
| EN 1363-1-1999 |
耐火试验 第1部分：一般要求 |
Fire resistance tests - Part 1: General requirements |
| EN ISO 6940-1995 |
纺织织物 燃烧性能 垂直向样品易点燃性的测定 |
Textile fabrics - Burning behaviour - Determination of ease of ignition of vertically oriented specimens (ISO 6940:1984, including Amendment 1:1993) |
| EN 50267-2-3-1998 |
在着火条件下电缆的一般测试方法 电缆材料燃烧过程中放出气体的试验 第2-3部分：程序 通过测量 pH 值和 |
Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-3: Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity Partly Supersedes HD602S1:1992 |
| EN 1364-2-1999 |
非承重构件的耐火试验 第2部分：顶棚 |
Fire resistance tests for non-loadbearing elements - Part 2: Ceilings |
| EN 1365-4-1999 |
承重构件的耐火试验 第4部分：柱 |
Fire resistance tests for loadbearing elements - Part 4: Columns |
| EN 50268-1-1999 |
在燃烧条件下电缆的一般试验方法 在规定条件下电缆燃烧烟密度测量 第1部分：仪器 |
Common test methods for cable under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 1: Apparatus |
| EN ISO 10093-1998 |
塑料 燃烧试验 标准火源 |
Plastics - Fire tests - Standard ignition sources (ISO 10093:1998) |
| EN 1366-1-1999 |
服务设施的耐火试验 第1部分：管道 |
Fire resistance tests for service installations - Part 1: Ducts |
| EN 1834-1-2000 |
往复式内燃发动机 用在潜在爆炸环境下发动机设计结构和安全要求 第1部分：用在可燃气体和蒸气环境的II组 |
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres |
| EN 148-1-1999 |
呼吸保护装置 面具用螺纹 第1部分：标准螺纹连接 |
Respiratory protective devices - Threads for facepieces - Part 1: Standard thread connection |
| EN 1366-2-1999 |
服务设施的耐火试验 第2部分：防火阀 |
Fire resistance tests for service installations - Part 2: Fire dampers |
| ENV 61112-2001 |
电工用绝缘材料垫 |
Blankets of insulating material for electrical purposes (IEC 61112:1992 + Corrigendum 2000, modified) |
| ENV 50354-2001 |
工人暴露于电弧的危险下使用的材料和衣着的电弧试验方法 |
Electrical arc test methods for material and garments, for use by workers at risk from exposure to an electrical arc |
| EN 1634-1-2000 |
门和百叶窗组件的耐火试验 第1部分：着火门和百叶窗 |
Fire resistance tests for door and shutter assemblies - Part 1: Fire doors and shutters |
| EN ISO 12952-2-1998 |
纺织品 床上用品的燃烧性能 第2部分：由发烟燃烧的香烟为点火源的可点燃性的特殊试验方法 |
Textiles - Burning behaviour of bedding items - Part 2: Specific test methods for the ignitability by a smouldering cigarette (ISO 12952-2:1998) |
| EN 61219-1993 |
带电作业? 用挂杆作为短路装置的接地或接地并短路设备 挂杆接地 |
Live working; earthing or earthing and short-circuiting equipment using lances as a short-circuiting device; lance earthing (IEC 61219:1993) |
| EN 60855-1996 |
带电作业用绝缘泡沫材料填充管和实心棒 |
Insulating foam-filled tubes and solid rods for live working (IEC 60855:1985, modified) |
| ENV 1999-1-2-1998 |
欧洲法典 9：铝结构设计 第1-2部分：一般规则 结构防火设计 |
Eurocode 9: Design of aluminium structures - Part 1-2: General rules - Structural fire design |
| EN 1365-3-1999 |
承重钩件的耐火试验 第3部分：横梁 |
Fire resistance tests for loadbearing elements - Part 3: Beams |
| EN 50292-2001 |
探测房屋内一氧化碳的电气装置 选择、安装、使用和维护指南 |
Electrical apparatus for the detection of carbon monoxide in domestic premises - Guide on the selection, installation, use and maintenance |
| EN ISO 12952-4-1998 |
纺织品 床上用品的燃烧性能 第4部分：小点火源的可点燃性的特殊试验方法 |
Textiles - Burning behaviour of bedding items - Part 4: Specific test methods for the ignitability by a small open flame (ISO 12952-4:1998) |
| EN ISO 5659-2-1998 |
塑料 烟雾产生 第2部分：用单燃烧室检验测定光密度 |
Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:1994, including Technical Corrigendum 1:1997) |
| EN 13463-1-2001 |
潜在爆炸性空气中使用的非电气设备 第1部分：基本方法和要求 |
Non-electrical equipment for potentially explosive atmospheres - Part 1: Basic method and requirements |
| EN 1634-3-2001 |
门和百叶窗组件的耐火试验 第3部分：烟幕控制门和百叶窗 |
Fire resistance tests for door and shutter assemblies - Part 3: Smoke control doors and shutters |
| EN ISO 15029-1-1999 |
石油和相关产品 难燃液体喷射燃烧特性的测定 第1部分：喷流燃烧持久度 空锥喷嘴法 |
Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 1: Spray flame persistence - Hollow-cone nozzle method (ISO 15029-1:1999) |
| EN 13541-2000 |
建筑物玻璃 安全玻璃窗 爆炸压力耐受性试验和分类 |
Glass in building - Security glanzing - Testing and classification of resistance against explosion pressure |
| EN 60825-2-2000 |
激光产品安全 第2部分：光纤通信系统的安全 |
Safety of laser products - Part 2: Safety of optical fibre communication systems (IEC 60825-2:2000) |
| EN 26184-1-1991 |
抑爆系统 第1部分：空气中可燃粉尘爆炸指数的测定 |
Explosion protection systems; Part 1 : Determination of explosion indices of combustible dusts in air (ISO 6184-1:1985) |
| EN 1363-2-1999 |
耐火试验 第2部分：替换和添加程序 |
Fire resistance tests - Part 2: Alternative and additional procedures |
| EN 26184-4-1991 |
抑爆系统 第4部分：抑爆系统效率的测定 |
Explosion protection systems; Part 4 : Determination of efficacy of explosion suppression systems (ISO 6184-4:1985) |
| ENV 1995-1-2-1994 |
欧洲法典 5：木结构设计 第1-2部分：一般规则 结构防火设计 |
Eurocode 5 - Design of timber structures - Part 1-2: General rules - Structural fire design |
| EN 26184-2-1991 |
抑爆系统 第2部分：空气中易燃气体爆炸指数的测定 |
Explosion protection systems; part 2 : determination of explosion indices of combustible gases in air (ISO 6184-2:1985) |
| EN 1364-1-1999 |
非承重构件的耐火试验 第1部分：墙 |
Fire resistance tests for non-loadbearing elements - Part 1: Walls |
| EN 60832-1996 |
带电作业用绝缘杆（绝缘棒）及通用工具附件（金具） |
Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working (IEC 60832:1988, modified) |
| ENV 1996-1-2-1995 |
欧洲法规典 6：砖石结构设计 第1-2部分：一般规则 结构防火设计 |
Eurocode 6: Design of masonry structures - Part 1-2: General rules; Structural fire design |
| EN 1987-3-1998 |
电动道路车辆 安全的特殊要求 第3部分：防止使用者被电伤害的保护 |
Electrically propelled road vehicles - Specific requirements for safety - Part 3: Protection of users against electrical hazards |
| EN 61235-1995 |
带电作业 电工用绝缘空心管 |
Live working - Insulating hollow tubes for electrical purposes (IEC 61235:1993, modified) |
| EN 13238-2001 |
对建筑制品耐火试验的反映 准备程序和基底选择的一般原则 |
Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| EN 12874-2001 |
灭火器 性能要求、试验方法和使用范围 |
Flame arresters - Performance requirements, test methods and limits for use |
| EN 50237-1997 |
用于电气机械保护目的的手套和连指手套 |
Gloves and mitts with mechanical protection for electrical purposes |
| EN 1834-2-2000 |
往复式内燃发动机 用在潜在爆炸环境下发动机设计结构和安全要求 第2部分：对沼气和/或可燃性尘土敏感地下 |
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust |
| EN 13123-1-2001 |
窗、门和百叶窗 抗爆性 要求和分类 第1部分：激波管 |
Windows, doors and shutters - Explosion resistance; Requirements and classification - Part 1: Shock tube |
| EN 50286-1999 |
低压设施的电气绝缘保护套 |
Electrical insulating protective clothing for low-voltage installations |
| EN 61243-3-1998 |
带电作业 电压检测器 第3部分：两极低压型 |
Live working - Voltage detectors - Part 3: Two-pole low voltage type (IEC 61243-3:1998) / Note: Includes Corrigendum of February 2002 |
| EN 1834-3-2000 |
往复式内燃发动机 用在潜在爆炸环境下发动机设计结构和安全要求 第3部分：用在可燃灰尘环境下的II组发动 |
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres |
| EN 26184-3-1991 |
抑爆系统 第3部分：除粉尘/空气和气体/空气混合物以外的燃料/空气混合物爆炸指数的测定 |
Explosion protection systems; Part 3 : Determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures (ISO 6184-3:1985) |
| EN 50321-1999 |
在低压设施上工作时使用的绝缘鞋袜 |
Electrically insulating footwear for working on low voltage installations |
| EN 421-1994 |
预防电离辐射和放射性污染的防护手套 |
Protective gloves against ionizing radiation and radioactive contamination |
| EN 60895-1996 |
在标称交流电压达到800kV时带电作业用的导电衣着 |
Conductive clothing for live working at a nominal voltage up to 800 kV a.c. (IEC 60895:1987, modified) |
| EN 13124-1-2001 |
窗、门和百叶窗 抗爆性 试验方法 第1部分：激波管 |
Windows, doors and shutters - Explosion resistance; Test method - Part 1: Shock tube |
| EN 1073-1-1998 |
防放射性污染的防护服装 第1部分：用于防止微粒放射性污染的可通风防护服装的要求和试验方法 |
Protective clothing against radioactive contamination - Part 1: Requirements and test methods for ventilated protective clothing against particulate radioactive contamination |
| EN 1522-1998 |
窗、门、百页窗和遮帘 抗弹性 要求和分类 |
Windows, doors, shutters and blinds - Bullet resistance - Requirements and classification |
| EN 60984-1992 |
带电作业用绝缘袖套 |
Sleeves of insulating material for live working (IEC 60984:1990, modified) |
| EN 61478-2001 |
带电作业 绝缘材料制梯子 |
Live working - Ladders of insulating material (IEC 61478:2001) / Note: Endorsement notice |
| EN 50357-2001 |
对暴露于EAS、RFID和类似应用时使用的装置产生的电磁场中的人的评估 |
Evaluation of human exposure to electromagnetic fields from devices used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications |
| EN 50134-3-2001 |
报警系统 公共报警系统 第3部分：局部装置和控制器 |
Alarm systems - Social alarm systems - Part 3: Local unit and controller |
| EN 60990-1999 |
接触电流和保护导体电流的测量方法 |
Methods of measurement of touch current and protective conductor current (IEC 60990:1999) |
| EN 61481-2001 |
带电作业? 1 kV ～ 36 kV交流电压用便携式相位比较器 |
Live working - Portable phase comparators for voltages from 1 kV to 36 kV a.c. (IEC 61481:2001) |
| EN 61236-1995 |
带电作业用滑动座架、硬梯及附件 |
Saddles, pole clamps (stick clamps) and accessories for live working (IEC 61236:1993, modified) |
| EN 50364-2001 |
人暴露于电子产品监督（EAS）、无线电频率识别（RFID）及类似用途使用的工作频率为 0 Hz-10 GHz装置产生的 |
Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 10 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications |
| EN 50134-7-1996 |
报警系统 公共报警系统 第7部分：应用指南 |
Alarm systems - Social alarm systems - Part 7: Application guidelines |
| EN 12561-1-1998 |
铁路用 槽车 第1部分：危险货物运输槽车车标记 |
Railway applications - Tank wagons - Part 1: Marking of tank wagons for the carriage of dangerous goods |
| EN 61566-1997 |
射频电磁场辐照测量 频率范围从100kHz至1GHz间的场强 |
Measurement of exposure to radio-frequency electromagnetic fields - Field strength in the frequency range 100 kHz to 1 GHz (IEC 61566:1997) |
| EN 50136-2-2-1998 |
报警系统 报警发送系统和设备 第2-2部分：使用专用报警系统用设备要求 |
Alarm systems - Alarm transmission systems and equipment - Part 2-2: Requirements for equipment used in systems using dedicated alarm paths |
| EN 61243-5-2001 |
带电作业 电压检测器 第5部分：电压检测系统 |
Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS) (IEC 61243-5:1997, modified) |
| EN 13082-2001 |
危险品运输罐 罐辅助设备 蒸汽输送阀 |
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve |
| EN 356-1999 |
建筑物用玻璃 安全玻璃窗 防人为攻击的能力的测试和分类 |
Glass in building - Security glazing - Testing and classification of resistance against manual attack |
| EN 12972-2001 |
危险品运输罐 金属罐测试、检验和标志 |
Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks |
| EN 1143-2-2001 |
安全存储单元 防盗试验的要求、分类和方法 第2部分：存款系统 |
Secure storage units - Requirements, classification and methods of tests for resistance to burglary - Part 2: Deposit systems |
| EN 1523-1998 |
窗、门、百页窗和遮帘 抗弹性 试验方法 |
Windows, doors, shutters and blinds - Bullet resistance - Test method |
| EN 1063-1999 |
建筑物用玻璃 玻璃件安全性 抗子弹冲击的测试和分类 |
Glass in building - Security glazing - Testing and classification of resistance against bullet attack |
| EN 13081-2001 |
危险品运输罐 罐辅助设备 蒸汽收集适配器和连接器 |
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler |
| EN 21683-1994 |
声学 基准声学量 |
Acoustics - Preferred reference quantities for acoustic levels (ISO 1683:1983) |
| ENV 1629-1999 |
窗、门、百叶窗 防盗性能 动态负荷下测定防盗能力的试验方法 |
Windows, doors, shutters - Burglar resistance - Test method for the determination of resistance under dynamic loading |
| ENV 1300-1999 |
安全存储装置 遵循按其对未授权开启锁的抵御力对高安全度锁的分类 |
Secure storage units - Classification for high security locks according to their resistance to unauthorized opening |
| EN 13083-2001 |
危险品运输罐 罐辅助设备 底部装卸适配器 |
Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading |
| EN ISO 3746-1995 |
声学 声压法测定噪声源的声功率级 采用包络测面积的简易法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995) |
| ENV 1627-1999 |
窗、门、百叶窗 防盗性能 要求和分类 |
Windows, doors, shutters - Burglar resistance - Requirements and classification |
| ENV 1628-1999 |
窗、门、百叶窗 防盗性能 静负荷下测定防盗能力的试验方法 |
Windows, doors, shutters - Burglar resistance - Test method for the determination of resistance under static loading |
| EN ISO 8316-1995 |
封闭管道中液体流量的测定 采用在容积计量容器内收集液体的方法 |
Measurement of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank (ISO 8316:1987) |
| EN 61779-1-2000 |
可燃性气体的检测和测量用电气设备 第1部分：一般要求和试验方法 |
Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirements and test methods (IEC 61779-1:1998, modified) |
| EN ISO 9300-1995 |
用文杜利临界流量喷嘴测定气体流量 |
Measurement of gas flow means of critical flow Venturi nozzles (ISO 9300:1990) |
| EN 50241-1-1999 |
可燃或毒性气体和蒸气的检测用开路仪器规范? 第1部分：一般要求和试验方法 |
Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 1: General requirements and test methods |
| EN 29053-1993 |
声学 吸声材料 流阻的测定 |
Acoustics; materials for acoustical applications; determination of airflow resistance (ISO 9053:1991) |
| EN 348-1992 |
防护服 试验方法：材料抗熔融金属溅沫冲击性能的测定 |
Protective clothing; Test method: determination of behaviour of materials on impact of small splashes of molten metal |
| EN ISO 748-2000 |
明渠水流测量 流速面积法 |
Measurement of liquid flow in open channels - Velocity-area methods (ISO 748:1997) |
| EN 50244-2000 |
家用易燃气体探测用电气设备 选择、安装、使用和维修指南 |
Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance |
| EN ISO 266-1997 |
声学 优先频率 |
Acoustics - Preferred frequencies (ISO 266:1997) |
| EN ISO 3741-1999 |
声学 声压法测定噪声源的声功率级 混响室精密法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms (ISO 3741:1999) |
| EN 368-1992 |
防护服 耐液体化学品防护 试验方法：材料耐液体渗透性能 |
Protective clothing; protection against liquid chemicals; test method: resistance of materials to penetration by liquids |
| EN 50291-2001 |
探测房屋内一氧化碳的电气装置 试验方法和性能要求 |
Electrical apparatus for the detection of carbon monoxide in domestic premises - Test methods and performance requirements |
| EN ISO 3747-2000 |
声学 声压法测定噪声源的声功率级 现场比较法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method for use in situ (ISO 3747:2000) |
| EN ISO 3744-1995 |
声学 声压法测定噪声源的声功率级 一个反射面上方近似自由场中的工程法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) |
| EN 381-2-1995 |
手持式链锯使用者用防护服 第2部分：腿保护服试验方法 |
Protective clothing for users of hand-held chain saws - Part 2: Test methods for leg protectors |
| EN 50136-1-2-1998 |
报警系统 报警发送系统和设备 第1-2部分：使用专用报警通路的系统要求 |
Alarm systems - Alarm transmission systems and equipment - Part 1-2: Requirements for systems using dedicated alarm paths |
| EN ISO 6926-2001 |
声学 声功率级测定用的基准声源的性能和校正的要求 |
Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2000) |
| EN 61779-2-2000 |
可燃性气体的检测和测量用电气设备 第2部分：指示空气中甲烷体积百分率最大为5%的I类设备的性能要求 |
Electrical apparatus for the detection and measurement of flammable gases - Part 2: Performance requirements for group I apparatus indicating a volume fraction up to 5 % methane in air (IEC 61779-2:1998, modified) |
| EN 463-1994 |
抗液态化学品的防护服 试验方法 射流防渗透性测定（射流试验） |
Protective clothing for use against liquid chemicals - Test method: Determination of resistance to penetration by a jet of liquid (Jet Test) |
| EN 50136-2-3-1998 |
报警系统 报警发送系统和设备 第2-3部分：使用公共交换电话网带数字通话装置的系统用设备要求 |
Alarm systems - Alarm transmission systems and equipment - Part 2-3: Requirements for equipment used in systems with digital communicators using the public switched telephone network |
| EN 50136-1-4-1998 |
报警系统 报警传输系统和设备 第1-4部分：使用公众交换电话网的电话通讯系统 的要求 |
Alarm systems - Alarm transmission systems and equipment - Part 1-4: Requirements for systems with voice communicators using the public switched telephone network |
| EN 61779-3-2000 |
可燃性气体的检测和测量用电气设备 第3部分：指示空气中甲烷体积百分率最大为100%的I类设备的性能要求 |
Electrical apparatus for the detection and measurement of flammable gases - Part 3: Performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air (IEC 61779-3:1998, modified) |
| EN 469-1995 |
消防人员的防护服装 消防防护服装的要求和试验方法 |
Protective clothing for firefighters - Requirements and test methods for protective clothing for firefighting |
| EN 50194-2000 |
探测房屋内易燃气体的电气装置 测试方法及性能要求 |
Electrical apparatus for the detection of combustible gases in domestic premises - Test methods and performance requirements |
| EN 61779-5-2000 |
可燃性气体的检测和测量用电气设备 第5部分：指示气体体积百分率最大为100%的II类设备的性能要求 |
Electrical apparatus for the detection and measurement of flammable gases - Part 5: Performance requirements for group II apparatus indicating a volume fraction up to 100 % gas (IEC 61779-5:1998, modified) |
| EN 50136-1-3-1998 |
报警系统 报警发送系统和设备 第1-3部分：使用公共交换电话网带数字通话装置的系统要求 |
Alarm systems - Alarm transmission systems and equipment - Part 1-3: Requirements for systems with digital communicators using the public switched telephone network |
| EN 702-1994 |
防护服 防热和防火 试验方法 透过防护服或其材料传输的接触热的测定 |
Protective clothing - Protection against heat and flame - Test method: Determination of the contact heat transmission through protective clothing or its materials |
| EN 510-1993 |
在与运动部件缠绕的危险处使用的防护服规范 |
Specification for protective clothing for use where there is a risk of entanglement with moving parts |
| EN 340-1993 |
防护服 一般要求 |
Protective clothing; General requirements |
| EN 50136-2-4-1998 |
报警系统 报警发送系统和设备 第2-4部分：使用公共交换电话网带声音通话装置的系统用设备要求 |
Alarm systems - Alarm transmission systems and equipment - Part 2-4: Requirements for equipment used in systems with voice communicators using the public switched telephone network |
| EN 1082-1-1996 |
防护服 防手工刀具砍中和刺中的手套和手臂防护物 第1部分：链式盔甲手套和手臂防护物 |
Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 1: Chain mail gloves and arm guards |
| EN 1082-2-2000 |
防护服 防手工刀具砍中和刺中的手套和手臂防护物 第2部分：除链式盔甲外其它材料制作的手套和手臂防护物 |
Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 2: Gloves and arm guards made of material other than chain mail |
| EN 50241-2-1999 |
可燃或毒性气体和蒸气的检测用开路仪器规范? 第2部分：可燃气体检测用仪器的性能要求 |
Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 2: Performance requirements for apparatus for the detection of combustible gases |
| EN 50271-2001 |
探测和测量易燃气体、有毒气体或氧气的电气装置 使用软件和（或）数字技术装置的要求和测试 |
Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies |
| EN ISO 6529-2001 |
防护服 化学制品的防护 防护服材料对水和气的抗渗透性测试? |
Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases (ISO 6529:2001) |
| EN 1149-2-1997 |
防护服 静电性能 第2部分：通过材料的电阻（垂直电阻）的测量的试验方法 |
Protective clothing - Electrostatic properties - Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance) |
| EN 381-1-1993 |
手持式链锯使用者用防护服 第1部分：耐链锯切割试验用试验台 |
Protective clothing for users of hand held chainsaws; Part 1: Test rig for testing resistance to cutting by a chainsaw |
| EN 61669-2001 |
电声学 助听器真实声音特性测量设备 |
Electroacoustics - Equipment for the measurement of real-ear acoustical characteristics of hearing aids (IEC 61669:2001) |
| EN 1150-1999 |
防护服 非职业用可见度服装 试验方法和要求 |
Protective clothing - Visibility clothing for non-professional use - Test methods and requirements |
| EN 60849-1998 |
应急用声音系统 |
Sound systems for emergency purposes (IEC 60849:1998) |
| EN 381-8-1997 |
手持式链锯使用者用防护服 第8部分：链锯保护高腰松紧鞋的试验方法 |
Protective clothing for users of hand-held chain saws - Part 8: Test methods for chain saw protective gaiters |
| ENV 342-1998 |
防护服 综合防寒服装 |
Protective clothing - Ensembles for protection against cold |
| EN 1486-1996 |
消防队防护服 特殊灭火用反射服的试验方法和要求 |
Protective clothing for firefighters - Test methods and requirements for reflective clothing for specialized fire fighting |
| EN 61779-4-2000 |
可燃性气体的检测和测量用电气设备 第4部分：指示体积百分率最大为100%低爆炸物极限的II类设备的性能要求 |
Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating a volume fraction up to 100 % lower explosive limit (IEC 61779-4:1998, modified) |
| EN 13277-2-2000 |
武术防护设备 第2部分：脚背、胫和前臂保护器的附加要求和试验方法 |
Protective equipment for martial arts - Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors |
| EN 367-1992 |
防护服 防热和防火 暴露于火焰情况下的传热性能测定方法 |
Protective clothing; Protection against heat and fire; Method of determining heat transmission on exposure to flame |
| EN 373-1993 |
防护服 材料耐熔融金属飞溅的评定 |
Protective clothing; Assessment of resistance of materials to molten metal splash |
| EN 1621-1-1997 |
摩托车驾驶员防机械冲撞的防护服 第1部分：冲撞保护服的试验方法和要求 |
Motorcyclists protective clothing against mechanical impact - Part 1: Requirements and test methods for impact protectors |
| EN 443-1997 |
消防人员用头盔 |
Helmets for firefighters |
| EN 1385-1997 |
独木舟和水上运动用防护帽 |
Helmets for canoeing and white water sports |
| EN 381-9-1997 |
手持式链锯使用者用防护服 第9部分：链锯保护高腰松紧鞋的要求 |
Protective clothing for users of hand-held chain saws - Part 9: Requirements for chain saw protective gaiters |
| EN 167-2001 |
个人眼睛保护装置 光学试验方法 |
Personal eye-protection - Optical test methods |
| EN 1077-1996 |
高山滑雪者用防护帽 |
Helmets for alpine skiers |
| EN 13087-10-2000 |
防护头盔 试验方法 第10部分：抗辐射热性 |
Protective helmets - Test methods - Part 10: Resistance to radiant heat |
| EN 863-1995 |
防护服 机械性能 试验方法：抗穿透性 |
Protective clothing - Mechanical properties - Test method: Puncture resistance |
| EN 168-2001 |
个人眼睛保护装置 非光学试验方法 |
Personal eye-protection - Non-optical test methods |
| EN 1835-1999 |
呼吸保护装置 带有头盔和头罩的轻型结构压缩空气的线状呼吸装置 要求、试验、标记 |
Respiratory protective devices - Light duty construction compressed air line breathing apparatus incorporating a helmet or a hood - Requirements, testing, marking |
| EN 13781-2001 |
雪上汽车和雪橇司机和乘客用保护头盔 |
Protective helmets for drivers and passengers of snowmobiles and bobsleighs |
| EN 13061-2001 |
防护服 足球运动员用小腿保护器 要求和试验方法 |
Protective clothing - Shin guards for association football players - Requirements and test methods |
| EN 1836-1997 |
人的眼睛保护 常规使用的太阳镜和滤光镜 |
Personal eye protection - Sunglasses and sunglare filters for general use |
| EN 464-1994 |
包括气溶液体和固体粒子的抗液态和气态化学品的防护服 试验方法：气密服的密封性测定(内压力试验) |
Protective clothing for use against liquid and gaseous chemicals, including aerosols and solid particles - Test method: Determination of leak-tightness of gas-tight suits (internal pressure test) |
| EN 24869-1-1992 |
声学 护听器 第1部分：声衰减测量的主观法 |
Acoustics; hearing protectors; subjective method for the measurement of sound attentuation (ISO 4869-1:1990) |
| EN ISO 13995-2000 |
防护服? 机械特性 测定服装材料在压力下防液体渗透阻力的测定 |
Protective clothing - Mechanical properties - Test method for the determination of the resistance to puncture and dynamic tearing of materials (ISO 13995:2000) |
| EN 468-1994 |
液态化学品防护服 试验方法：喷射抗渗透性的测定(喷射试验) |
Protective clothing for use against liquid chemicals - Test method: Determination of resistance to penetration by spray (Spray test) |
| EN 13087-4-2000 |
防护头盔 试验方法 第4部分：保持系统效力 |
Protective helmets - Test methods - Part 4: Retention system effectiveness |
| EN 166-2001 |
个人眼睛保护装置 规范 |
Personal eye-protection - Specifications |
| EN 24869-3-1993 |
声学 听力器 第3部分：质量检验用耳罩式护听器插入损失测量的简易方法 |
Acoustics; Hearing protectors; Part 3: Simplified method for the measurement of insertion loss of ear-muff type protectors for quality inspection purposes (ISO/TR 4869-3:1989) |
| EN 1082-3-2000 |
防护服 防手工刀具砍中和刺中的手套和手臂防护物 第3部分：织物、皮革和其它材料的冲击切割试验 |
Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 3: Impact cut test for fabric, leather and other materials |
| EN 13087-5-2000 |
防护头盔 试验方法 第5部分：保持系统强度 |
Protective helmets - Test methods - Part 5: Retention system strength |
| EN ISO 4869-4-2000 |
声学 护听器 第4部分：与电平有关声音恢复耳罩的有效声压级的测量 |
Acoustics - Hearing protectors - Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs (ISO/TR 4869-4:1998) |
| EN 1078-1997 |
骑自行车的人和滑板及旱冰鞋使用者用防护帽 |
Helmets for pedal cyclists and for users of skateboards and roller skates |
| EN 1149-1-1995 |
防护服 静电性能 第1部分：表面电阻（试验方法和要求） |
Protective clothing - Electrostatic properties - Part 1: Surface resistivity (Test methods and requirements) |
| EN 13087-8-2000 |
防护头盔 试验方法 第8部分：电气性能 |
Protective helmets - Test methods - Part 8: Electrical properties |
| EN 1384-1996 |
骑马用防护帽规范 |
Helmets for equestrian activities |
| CR 13464-1999 |
职业眼睛和面部保护器的选择、使用和维修指南 |
Guide to selection, use and maintenance of occupational eye and face protectors |
| EN 174-2001 |
个人眼睛保护装置 向下滑雪用滑雪护目镜 |
Personal eye-protection - Ski goggles for downhill skiing |
| EN 13356-2001 |
非专业用可视辅助设备 试验方法和要求 |
Visibility accessories for non-professional use - Test methods and requirements |
| EN 61183-1994 |
电声学 声级计的无规定射声场及扩散声场的校正 |
Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters (IEC 61183:1994) |
| EN 138-1994 |
呼吸保护装置 与全罩式面罩、半罩式面罩或口罩一起使用的新鲜空气软管呼吸器 要求、测试、标志 |
Respiratory protective devices - Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly - Requirements, testing, marking |
| EN 13178-2000 |
个人视力保护 雪上汽车驾乘者用视力保护器 |
Personal eye-protection - Eye protectors for snowmobile users |
| EN 13277-1-2000 |
武术防护设备 第1部分：一般要求和试验方法 |
Protective equipment for martial arts - Part 1: General requirements and test methods |
| EN 61260-1995 |
电声学 分倍频程和频程频带滤波器 |
Electroacoustics - Octave-band and fractional-octave-band filters (IEC 61260:1995) |
| EN 13277-4-2001 |
武术防护设备 第4部分：头部保护器的附加要求和试验方法 |
Protective equipment for martial arts - Part 4: Additional requirements and test methods for head protectors |
| EN 381-5-1995 |
手持式链锯使用者用防护服 第5部分：腿防护服的要求 |
Protective clothing for users of hand-held chain saws - Part 5: Requirements for leg protectors |
| EN 352-4-2001 |
听力保护器 安全要求和测试 第4部分：电平依赖的耳套 |
Hearing protectors - Safety requirements and testing - Part 4: Level -dependent ear-muffs |
| EN 61329-1996 |
声系统设备 测量和规范发声器性能的方法(发声用电解传感器) |
Sound system equipment - Methods of measuring and specifying the performance of sounders (electroacoustic transducers for tone production) (IEC 61329:1995) |
| EN 13484-2001 |
雪橇使用者头盔 |
Helmets for users of luges |
| EN 141-2000 |
呼吸保护装置 气体过滤器和组合过滤器 要求、测试、标志 |
Respiratory protective devices - Gas filters and combined filters - Requirements, testing, marking |
| EN 458-1993 |
听力保护装置 选择、使用、注意及维修的推荐规程 指导文件 |
Hearing protectors; Recommendations for selection, use, care and maintenance; guidance document |
| HD 305 S1-1977 |
用耳塞耦合到人耳的耳机的助听器测量用IEC参考耦合器 |
IEC reference coupler for the measurement of hearing aids using earphones coupled to the ear by means of ear inserts |
| EN 137-1993 |
呼吸保护装置 自备开路压缩空气呼吸器 要求、测试、标志 |
Respiratory protective devices; self-contained open-circuit compressed air breathing apparatus; requirements, testing, marking |
| EN 12941-1998 |
呼吸保护器 带头盔或帽的电动过滤装置 要求、测试、标志 |
Respiratory protective devices - Powered filtering devices incorporating a helmet or a hood - Requirements, testing, marking |
| EN 1938-1998 |
人的眼睛保护 摩托车和机动脚踏两用车使用者的护目镜 |
Personal eye protection - Goggles for motorcycle and moped users |
| HD 450.5 S1-1985 |
助听器 第5部分：塞入式耳机的塞 |
Hearing aids; Part 5: Nipples for insert earphones |
| EN 144-2-1998 |
呼吸保护装置 气瓶阀 第2部分：出口连接 |
Respiratory protective devices - Gas cylinder valves - Part 2: Outlet connections |
| EN 13274-1-2001 |
呼吸保护器 试验方法 第1部分：内部泄漏和总内部泄漏的测定 |
Respiratory protective devices - Methods of test - Part 1: Determination of inward leckage and total inward leckage |
| EN ISO 4869-2-1995 |
声学 护听器 第2部分：佩带护听器时有效A－计权声压级的估算 |
Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO 4869-2:1994) |
| HD 450.9 S1-1987 |
助听器 第9部分：带骨振输出的助听器性能的测量方法 |
Hearing aids; Part 9: Methods of measurement of characteristics of hearing aids with bone vibrator output |
| EN 13274-2-2001 |
呼吸保护器 试验方法 第2部分：实际性能试验 |
Respiratory protective devices - Methods of test - Part 2: Practical performance tests |
| EN 133-2001 |
呼吸保护装置 分类 |
Respiratory protective devices - Classification |
| EN 533-1997 |
防护服 防热和防火 限制火焰蔓延用材料及材料组件 |
Protective clothing - Protection against heat and flame - Limited flame spread materials and material assemblies |
| HD 483.15 S4-1992 |
声系统设备 第15部分：声系统元件互连的优选匹配值 |
Sound system equipment; Part 15: preferred matching values for the interconnection of sound system components (IEC 60286-15:1987 + A1:1989 + A2:1990 + A3:1991) |
| EN 13274-3-2001 |
呼吸保护器 试验方法 第3部分：呼吸阻力的测定 |
Respiratory protective devices - Methods of test - Part 3: Determination of breathing resistance |
| EN 143-2000 |
呼吸保护装置 微粒过滤器 要求、测试、标志 |
Respiratory protective devices - Particle filters - Requirements, testing, marking |
| EN 13277-3-2000 |
武术防护设备 第3部分：身体保护器的附加要求和试验方法 |
Protective equipment for martial arts - Part 3: Additional requirements and test methods for trunk protectors |
| EN 13158-2000 |
防护服 骑马人防护夹克，身体和肩膀保护器 要求和试验方法 |
Protective clothing - Protective jackets, body and shoulder protectors for horse riders - Requirements and test methods |
| EN 13274-6-2001 |
呼吸保护器 试验方法 第6部分：吸入空气中二氧化碳含量的测定 |
Respiratory protective devices - Methods of test - Part 6: Determination of carbon dioxide content of the inhalation air |
| EN 61220-1995 |
超声学声场 0.5MHz至15MHz频率范围内用水听器测量和表征医疗超声设备产生的超声场的指南 |
Ultrasonics - Fields - Guidance for the measurement and characterization of ultrasonic fields generated by medical ultrasonic equipment using hydrophones in the frequency range 0,5 MHz to 15 MHz (IEC 61220:1993) |
| EN 61206-1995 |
超声学 连续波多普勒系统 试验规程 |
Ultrasonics - Continuous-wave Doppler systems - Test procedures (IEC 61206:1993) |
| EN 381-4-1999 |
手持式链锯使用者用防护服 第4部分：链锯防护手套的试验方法 |
Protective clothing for users of hand-held chainsaws - Part 4: Test methods for chainsaw protective gloves |
| EN 1496-1996 |
救生设备 救生升降装置 |
Rescue equipment - Rescue lifting devices |
| HD 483.10 S1-1993 |
声系统设备 第10部分：峰值节目电平表 |
Sound system equipment; Part 10: Peak programme level meters (IEC 60268-10:1991) |
| EN 62092-2001 |
超声学 水听器? 15 MHz至40 MHz频率范围内的特性和校准 |
Ultrasonics - Hydrophones - Characteristics and calibration in the frequency range from 15 MHz to 40 MHz (IEC 62092:2001) |
| EN 381-7-1999 |
手持式链锯使用者用防护服 第7部分：链锯防护手套的要求 |
Protective clothing for users of hand-held chainsaws - Part 7: Requirements for chainsaw protective gloves |
| EN 1497-1996 |
救生设备 救生绳索装置 |
Rescue equipment - Rescue harnesses |
| EN 12021-1998 |
呼吸保护装置 呼吸仪器用压缩空气 |
Respiratory protective devices - Compressed air for breathing apparatus |
| HD 450.3 S1-1984 |
助听器 第3部分：不完全戴在听者身上的助听设备 |
Hearing aids; Part 3: Hearing aids equipment not entirely worn on the listener |
| EN 1891-1998 |
防高处坠落用个人保护设备 低弹力撑子绳索 |
Personal protective equipment for the prevention of falls from a height - Low stretch kernmantel ropes |
| EN 12419-1999 |
呼吸保护器 配备全面罩、半面罩或四分之一面罩的轻负荷压缩空气管呼吸设备 要求、试验和标志 |
Respiratory protective devices - Light duty construction compressed air line breathing apparatus incorporating a full face mask, half mask or quarter mask - Requirements, testing, marking |
| CR 529-1993 |
呼吸保护装置的选择和使用指南 |
Guidelines for selection and use of respiratory protective devices |
| EN 407-1994 |
防热危险的保护手套(热和/或火) |
Protective gloves against thermal risks (heat and/or fire) |
| ENV 13005-1999 |
测量不确定表示指南 |
Guide to the Expression of uncertainty in measurement |
| EN 13274-5-2001 |
呼吸保护器 试验方法 第5部分：气候条件 |
Respiratory protective devices - Methods of test - Part 5: Climatic conditions |
| EN 12736-2001 |
电动道路车辆 用车载充电器充电过程中车辆的在空中噪声 声功率级的测定 |
Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level |
| EN 511-1994 |
御寒手套规范 |
Protective gloves against cold |
| EN 20286-1-1993 |
ISO极限和配合制 第一部分：公差、偏差和配合的基础 |
ISO system of limits and fits; Part 1: Bases of tolerances, deviations and fits (ISO 286-1:1988) |
| HD 581 S1-1991 |
低压辐射系统短路电流计算的应用指南 |
Application guide for calculation of short-circuit currents in low-voltage radial systems (IEC 60781:1989) |
| EN 175-1997 |
个人防护 焊接和类似加工中眼睛和面部的防护设备 |
Personal protection - Equipment for eye and face protection during welding and allied processes |
| EN 345-2-1996 |
专业应用的安全鞋靴 第2部分：附加规范 |
Safety footwear for professional use - Part 2: Additional specifications |
| EN 22768-2-1993 |
一般公差 第2部分：未注公差的要素的几何公差 |
General tolerances; Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989) |
| EN 140-1998 |
呼吸保护装置 半面罩和四分之一面罩 要求、测试、标志 |
Respiratory protective devices - Half masks and quarter masks - Requirements, testing, marking |
| EN 12568-1998 |
脚和腿的保护物 包头和防金属刺入的插入物的要求和试验方法 |
Foot and leg protectors - Requirements and test methods for toecaps and metal penetration resistant inserts |
| EN 1370-1996 |
铸造 用可视比较仪检验对表面粗糙度 |
Founding - Surface roughness inspection by visualtactile comparators |
| EN 347-2-1996 |
专业应用的职业鞋靴 第2部分：附加规范 |
Occupational footwear for professional use - Part 2: Additional specifications |
| EN 358-1999 |
工作定位和防高空坠落的人身保护设备 工作定位用带及限制和工作定位用系索 |
Personal protective equipment for work positioning and prevention of falls from a height - Belts for work positioning and restraint and work positioning lanyards |
| EN 362-1992 |
预防高空坠落的人身保护设备 连接器 |
Personal protective equipment against falls from a height; connectors |
| EN 13523-5-2001 |
喷镀金属圈材 试验方法 第5部分：抗快速形变力（冲击试验） |
Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test) |
| EN 13036-1-2001 |
公路和机场地面特性 试验方法 第1部分：采用体积测量补缀技术法测量路面宏观结构深度 |
Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique |
| EN 365-1992 |
预防高空坠落的人身保护设备 使用和标志说明的一般要求 |
Personal protective equipment against falls from a height; Deneral requirements for instructions for use and for marking |
| EN 813-1997 |
防止从高处坠落的个人保护设备 座式吊带 |
Personal protective equipment for prevention of falls from a height - Sit harnesses |
| EN 13523-7-2001 |
喷镀金属圈材 试验方法 第7部分：抗弯曲破裂力（T形弯曲试验） |
Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
| EN 13523-1-2001 |
喷镀金属圈材 试验方法 第1部分：镀层厚度 |
Coil coated metals - Test methods - Part 1: Coating thickness |
| EN 1498-1996 |
救生设备 救生圈 |
Rescue equipment - Rescue loops |
| EN 1095-1998 |
游艇上用的甲板安全带状装置和安全索 安全要求和试验方法 |
Deck safety harness and safety line for use on recreational craft - Safety requirements and test methods |
| EN 13523-14-2001 |
喷镀金属圈材 试验方法 第14部分：粉化（Helmen法） |
Coil coated metals - Test methods - Part 14: Chalking (Helmen method) |
| EN 13523-4-2001 |
喷镀金属圈材 试验方法 第4部分：束状硬度 |
Coil coated metals - Test methods - Part 4: Pencil hardness |
| EN 20286-2-1993 |
ISO极限和配合制 第二部分：孔和轴的标准公差等级和极限偏差表 |
ISO system of limits and fits; Part 2: Tables of standard tolerances grades and limit deviations for holes and shafts (ISO 286-2:1988) |
| EN ISO 1463-1994 |
金属和氧化覆盖层 覆盖层厚度测量 显微镜法? |
Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:1982) |
| EN 12477-2001 |
焊工防护手套 |
Protective gloves for welders |
| EN 22768-1-1993 |
一般公差 第1部分：未注公差的线性和角度尺寸的公差 |
General tolerances; Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989) |
| EN 344-2-1996 |
专业应用的安全防护和职业鞋靴 第2部分：附加要求和试验方法 |
Safety, protective and occupational footwear for professional use - Part 2: Additional requirements and test methods |
| EN ISO 2064-2000 |
金属和其他无机覆盖层 厚度测量的定义和一般要求 |
Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996) |
| EN ISO 9220-1994 |
金属覆盖层 镀层厚度测量 扫描电子显微镜法 |
Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988) |
| EN ISO 14253-1-1998 |
产品几何量技术规范(GPS) 工作的测量检验和测量设备 第1部分：按规范检验一致性或不一致性的判定规则 |
Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformance or non-conformance with specifications (ISO 14253-1:1998) |
| EN ISO 11562-1997 |
产品几何量技术规范(GPS) 表面特征：轮廓法 相位校正过滤器的计量特性 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Metrological characteristics of phase correct filters (ISO 11562:1996) |
| EN ISO 2177-1994 |
金属覆盖层 覆盖层厚度测量 阳极溶解库仑法 |
Metallic coatings - Measurement of coating thickness - Coulometer method by anodic dissolution (ISO 2177:1985) |
| EN ISO 13565-3-2000 |
产品几何量技术规范(GPS) 表面结构：轮廓法 具有分层功能特性的表面 第3部分：利用材料的概率曲线描述高 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve (ISO 13565-3:1998) |
| EN 13523-13-2001 |
喷镀金属圈材 试验方法 第13部分：抗加热快速老化性 |
Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat |
| EN ISO 12085-1997 |
产品几何量技术规范(GPS) 表面结构：轮廓法 图形参数 |
Geometrical Product Specification (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996) |
| EN ISO 2178-1995 |
磁性机体上的非磁性覆盖层 覆盖层厚度的测量 磁性法 |
Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:1982) |
| EN ISO 3650-1998 |
产品几何技术规范(GPS) 长度标准 块规 |
Geometrical Product Specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998) |
| EN ISO 3497-2000 |
金属覆盖层 镀层的厚度测量 X射线光谱法 |
Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods (ISO 3497:2000) |
| EN ISO 13565-1-1997 |
产品几何量技术规范(GPS) 表面结构：轮廓法 具有分层功能特性的表面 第1部分：滤波和一般测量条件 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996) |
| EN ISO 2360-1995 |
非磁性基金属上非导电涂层 镀层厚度的测量 涡流法 |
Non-conductive coatings on non-magnetic basis metals - Measurement of coating thickness - Eddy current method (ISO 2360:1982) |
| EN ISO 5436-2-2001 |
产品几何量技术规范(GPS) 表面结构：轮廓法 测量标准 第2部分：软件测量标准 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2001) |
| EN 13523-9-2001 |
喷镀金属圈材 试验方法 第9部分：抗水浸性 |
Coil coated metals - Test methods - Part 9: Resistance to water immersion |
| EN ISO 13565-2-1997 |
产品几何量技术规范(GPS) 表面结构：轮廓法 具有分层功能特性的表面 第2部分：利用线性材料比率曲线描述 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996) |
| EN 346-2-1996 |
专业应用的保护鞋靴 第2部分：附加规范 |
Protective footwear for professional use - Part 2: Additional specifications |
| EN ISO 10360-4-2000+AC-2002 |
产品几何量技术规范(GPS) 坐标测量机(CMM)的验收和复检试验 第4部分：用于扫描型坐标机? |
Geometrical Product Specifications (GPS) - Aceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode (ISO 10360-4:2000) |
| EN ISO 3543-2000 |
金属和非金属覆盖层 厚度的测量 β射线背散射法 |
Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000) |
| ENV ISO 14253-2-2001 |
产品几何量技术规范(GPS) 工作的测量检验和测量设备 第2部分：GPS测量中不确定度评估指南和在产品检验中 |
Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipments - Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO/TS 14253-2:199 |
| EN ISO 10360-6-2001 |
产品几何量技术规范(GPS) 坐标测量机(CMM)的验收和复检试验 第6部分：计算高斯相关特性中误差的评估 |
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001) |
| EN 381-3-1996 |
手持式链锯使用者用防护服 第3部分：鞋靴试验方法 |
Protective clothing for users of hand-held chain-saws - Part 3: Test methods for footwear |
| EN ISO 3274-1997 |
产品几何量技术规范(GPS) 表面结构：轮廓法 接触(触针)式仪器的标称特性 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996) |
| EN ISO 5436-1-2000 |
产品几何量技术规范(GPS) 表面结构：轮廓法 测量标准 第1部分：材料测量 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures (ISO 5436-1:2000) |
| EN ISO 12179-2000 |
产品几何量技术规范(GPS) 表面结构：轮廓法 接触(触针)式仪器的校准 |
Geometrical Product Specifications (GPS) - Surface texture: Profil method - Calibration of contact (stylus) instruments (ISO 12179:2000) |
| EN 45501-1992 |
非自动秤量仪的计量性能要求 |
Metrological aspects of non-automatic weighting instruments |
| EN ISO 3868-1994 |
金属和其他无机覆盖层 镀层厚度的测量 裵索多光束干射仪法 |
Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method (ISO 3868:1976) |
| HD 462 S1-1987 |
正常操作和事故条件下轻水核反应堆的液流处理监控设备 |
Process stream radiation monitoring equipment in light water nuclear reactors for normal operating and incident conditions |
| EN ISO 2361-1995 |
磁性和非磁性基体上的镍电度层 镀层厚度的测量 磁性法 |
Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2361:1982) |
| EN 837-3-1996 |
压力计 第3部分：薄膜和封装压力计 尺寸、计量、要求和测试 |
Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing |
| HD 475 S1-1986 |
核电子仪器用圆片尺寸 |
Dimensions of planchets used in nuclear electronic instruments |
| EN ISO 10360-2-2001 |
产品几何量技术规范(GPS) 坐标测量机(CMM)的验收和复检试验 第2部分：所用的坐标测量机械或测量尺寸 |
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used or measuring size (ISO 10360-2:2001) |
| EN ISO 4288-1997 |
产品几何量技术规范(GPS) 表面结构：轮廓法 评定表面结构的规则和方法 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
| EN 29104-1993 |
封闭管道中流体流量测量 液体电磁流量计性能评定方法 |
Measurement of fluid flow in closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991) |
| EN 60068-2-5-1999 |
环境试验 第2-5部分：试验 试验Sa：地面上的模拟太阳辐射 |
Environmental testing - Part 2: Tests - Test Sa: Simulated solar radiation at ground level (IEC 60068-2-5:1975) |
| EN ISO 10360-3-2000 |
产品几何量技术规范(GPS) 坐标测量机(CMM)的验收和复检试验 第3部分：旋转台的轴线作为第四轴线的坐标测 |
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with a axis of a rotary table as the fourth axis (ISO 10360-3:2000) |
| EN ISO 4518-1995 |
金属覆盖层 厚度测量 轮廓仪法 |
Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:1980) |
| EN ISO 6817-1995 |
封闭管道中导电液体流量的测量 采用电磁流率计的方法 |
Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters (ISO 6817:1992) |
| EN 60068-2-9-1999 |
环境试验 第2-9部分：试验? 太阳辐射试验指南 |
Environmental testing - Part 2: Tests - Guidance for solar radiation testing (IEC 60068-2-9:1975 + A1:1984) |
| EN ISO 10360-5-2000 |
产品几何量技术规范(GPS) 坐标测量机(CMM)的验收和复检试验 第5部分：使用多触针探测系统的坐标测量机 |
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using multiple-stylus probing systems (ISO 10360-5:2000) |
| EN 60068-1-1994 |
环境试验 第1部分：总则和指南 |
Environmental testing - Part 1: General and guidance (IEC 60068-1:1988 + Corrigendum 1988 + A1:1992) |
| EN 60068-2-13-1999 |
环境试验 第2-13部分：试验? 试验M：低气压 |
Environmental testing - Part 2: Tests - Test M: Low air pressure (IEC 60068-2-13:1983) |
| EN 60068-2-11-1999 |
环境试验 第2-11部分：试验? 试验Ka：盐雾 |
Environmental testing - Part 2: Tests - Test Ka: Salt mist (IEC 60068-2-11:1981) |
| EN 60068-2-18-2001 |
环境试验 第2-18部分：试验 试验R和指南 水 |
Environmental testing - Part 2-18: Tests; Test R and guidance: Water (IEC 60068-2-18:2000) |
| EN ISO 1042-1999 |
实验室玻璃器皿 单标线容量瓶 |
Laboratory glassware - One-mark volumetric flasks (ISO 1042:1998) |
| EN ISO 15212-1-1999 |
振荡型密度计 第1部分：实验室仪器 |
Oscillation-type density meters - Part 1: Laboratory instruments (ISO 15212-1:1998) |
| EN 837-2-1997 |
压力计 第2部分：压力计的选择和安装建议 |
Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges |
| EN 60068-2-6-1995 |
环境试验 第2-6部分：试验 试验Fc：振动(正弦) |
Environmental testing - Part 2: Tests - Tests Fc: Vibration (sinusoidal) (IEC 60068-2-6:1995 + Corrigendum 1995) |
| EN 12645-1998 |
测压计 机动车轮胎膨胀或/和压力检验设备 计量学 要求和试验 |
Pressure gauges - Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles - Metrology, requirements and testing |
| EN ISO 10846-1-1998 |
声学和振动 弹性元件的振动 声传输特性的实验室测量 第1部分：原理和指南 |
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines (ISO 10846-1:1997) |
| EN 60068-2-7-1993 |
基本环境试验规程 第2-7部分：试验 试验Ga和指南：稳态加速度 |
Basic environmental testing procedures; Part 2: Tests; test Ga and guidance: acceleration, steady state (IEC 60068-2-7:1983 + A1:1986) |
| EN ISO 14257-2001 |
声学 工作室中声学性能评估用空间声音分布曲线的测量和参量描述 |
Acoustics - Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance (ISO 14257:2001) |
| EN 61518-2001 |
压差(型)测量仪和413巴以下的凸缘闭锁装置之间的配合尺寸 |
Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa) (IEC 61518:2001) / Note: Includes Corrigendum of February 2002 |
| EN ISO 9614-1-1995 |
声学 声强法测定噪声源声功率级 第1部分：离散点测量法 |
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
| EN ISO 11546-2-1995 |
声学 隔声罩隔声性能的测定 第2部分：现场测量(验收和鉴定用) |
Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
| ENV 12102-1996 |
带电驱动压缩机的空调、热泵和除湿器 空气噪音的测量 声功率级的测定 |
Air conditioners, heat pumps and dehumidifiers with electrically driven compressors - Measurement of airborne noise - Determination of the sound power level |
| EN 24185-1993 |
封闭管道中液体流量的测量 重量法 |
Measurement of liquid flow in closed conduits; Weighing method (ISO 4185:1980) |
| HD 443 S1-1983 |
耳塞式耳机测量用耳塞模拟器 |
Occluded-ear simulator for the measurement of earphones coupled to the ear by ear inserts |
| EN 60534-8-1-2000 |
工业过程控制阀 第8部分：噪声的考虑 第1节：气动流流径控制阀产生的噪声的实验室测量 |
Industrial-process control valves - Part 8: Noise consideration; Section 1: Laboratory measurement of noise generated by hydrodynamic aerodynamic flow through control valves (IEC 60534-8-1:1986) |
| EN 12545-2000 |
鞋类、皮革和人造革制品的加工机械 噪声试验规则 通用要求 |
Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements |
| EN 1265-1999 |
铸造机器和设备的噪音试验规程 |
Noise test code for foundry machines and equipment |
| EN 60534-8-4-1994 |
工业过程控制阀 第8部分：噪声问题 第4节：流动产生的噪声的预测 |
Industrial-process control valves - Part 8: Noise considerations - Section 4: Prediction of noise generated by hydrodynamic flow (IEC 60534-8-4:1994) |
| EN 12549-1999 |
声学 紧固件驱动工具的噪声试验规则 工程法 |
Acoustics - Noise test code for fastener driving tools - Engineering method |
| EN ISO 3740-2000 |
声学 噪声源的声功率级的测定 基本标准使用导则? |
Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards (ISO 3740:2000) |
| EN 27182-1991 |
声学 在操作者位置上测定链锯发出的空气声 |
Acoustics; Measurement at the operators position of airborne noise emitted by chain saws (ISO 7182, edition 1984) |
| EN 60704-1-1997 |
家用和类似用途电器 测定空中传播噪声的试验规范 第1部分：一般要求 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 1: General requirements (IEC 60704-1:1997) |
| EN 27574-1-1988 |
声学 测定和检验机械及设备噪声标定值的统计方法 第1部分：一般考虑和定义 |
Acoustics; Statistical methods for determining and verifying stated noise emission values of machinery and equipment; Part 1: General considerations and definitions (ISO 7574-1:1985) |
| EN ISO 3743-1-1995 |
声学 噪声源的声功率级的测定 混响声场中小型可移动声源的工程法 第1部分：硬壁试验室中的比较法 |
Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Part 1: Comparison method for hard-walled test rooms (ISO 3743-1:1994) |
| EN 27574-2-1988 |
声学 测定和检验机械及设备噪声标定值的统计方法 第2部分：用于单个机械的方法 |
Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 2: methods for stated values for individual machines (ISO 7574-2:1985) |
| EN 60704-2-1-2001 |
测定家用和类似电器发出的空气传播的噪声的试验规则 第2-1部分：真空吸尘器的特殊要求 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for vacuum cleaners (IEC 60704-2-1:2000) / Note: Applies only in conjunction with EN 60704-1 (1997) |
| EN 27574-3-1988 |
声学 测定和检验机械及设备噪声标定值的统计方法 第3部分：用于机组的简易（传递）法 |
Acoustics; Statistical methods for determining and verifying stated noise emission values of machinery and equipment; Part 3: Simple (transition) method for stated values for batches of machines (ISO 7574-3:1985) |
| EN ISO 3822-1-1999 |
声学 供水设施的装置和设备发射的噪音的实验室测定 第1部分：测量方法 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999) |
| EN 60068-2-14-1999 |
环境试验? 第2-14部分：试验 试验N：温度变化 |
Environmental testing - Part 2: Tests - Test N: Change of temperature (IEC 60068-2-14:1984 + A1:1986) |
| EN 60704-2-4-2001 |
测定家用和类似用途电器辐射气载噪声的试验规范 第2－4部分：洗衣机和离心式脱水机的特殊要求 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-4: Particular requirements for washing machines and spin extractors (IEC 60704-2-4:2001) / Note: Applies only in conjunction with EN 60704 |
| EN ISO 9614-2-1996 |
声学 声强法测定噪声源声功率级 第2部分：扫描测量法 |
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996) |
| EN ISO 3822-2-1995 |
声学 供水设施的装置和设备发射的噪音的实验室测定 第2部分：放水龙头和混合阀的安装和工作条件 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves (ISO 3822-2:1995) |
| EN 60068-2-17-1994 |
环境试验 第2-17部分：试验Q： 密封 |
Environmental testing - Part 2: Tests - Test Q: Sealing (IEC 60068-2-17:1994) |
| EN 60704-2-6-1995 |
测定家用和类似用途电器辐射气载噪声的试验规范 第2－6部分：滚筒式干衣机的特殊要求 |
Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Part 2: Particular requirements for tumble-dryers (IEC 60704-2-6:1994) |
| EN 27574-4-1988 |
声学 测定和检验机械及设备噪声标定值的统计方法 第4部分：用于机组的方法 |
Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; Part 4: Methods for stated values for batches of machines (ISO 7574-4:1985) |
| EN ISO 3822-3-1997 |
声学 供水设施的装置和设备发射的噪音的实验室测定 第3部分：管路阀门和器件的安装和工作条件 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances |
| EN ISO 10846-2-1998 |
声学和振动 弹性元件的振动 声传输特性的实验室测量 第2部分：传输运动用弹性支撑的动态劲度 直接法 |
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Dynamic stiffness of elastic supports for translatory motion - Direct method (ISO 10846-2:1997) |
| EN 1547-2001 |
工业热处理设备 工业热处理设备及辅助设备的噪声试验规则 |
Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment |
| EN ISO 3822-4-1997 |
声学 供水设施的装置和设备发射的噪音的实验室测定 第4部分：专用器件的安装和工作条件 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances |
| EN ISO 11546-1-1995 |
声学 隔声罩隔声性能的测定 第1部分：实验室测量(作说明用) |
Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) |
| EN 27917-1991 |
声学 在操作者位置上测量刷锯发出的空气声 |
Acoustics; Measurement at the operators position of airborne noise emitted by brush saws (identical with ISO 7917:1987) |
| EN 60704-2-11-1999 |
测定家用和类似用途电器辐射气载噪声的试验规范 第2－11部分：电动食品加工机的特殊要求 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-11: Particular requirements for electrically operated food preparation appliances (IEC 60704-2-11:1998) |
| EN 28960-1993 |
冷藏箱 家用和类似用途冷冻食品储藏柜和食品冷冻柜空气噪声的测量 |
Refrigerators, frozen-food storage cabinets and food freezers for household and similar use; measurement of emission of airborne acoustical noise (ISO 8960:1991) |
| EN 60076-10-2001 |
电力变压器 第10部分：声级的测定 |
Power transformers - Part 10: Determination of sound levels (IEC 60076-10:2001) |
| EN ISO 5135-1998 |
声学 在混响室中测定空调终端设备、空调终端单元、阻尼器和调节阀门的噪声功率级 |
Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997) |
| EN 60704-2-13-2000 |
家用和类似用途电器 测定空中传播噪声的试验规范 第2－13部分：排油烟机的特殊要求 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13: Particular requirements for range hoods (IEC 60704-2-13:2000) |
| EN 29295-1991 |
声学 计算机和办公室设备噪声发射的高频噪声的测量 |
Acoustics; Measurement of high-frequency noise emitted by computer and business equipment (identical with ISO 9295:1988) |
| EN ISO 11819-1-2001 |
声学 路面对交通噪声影响的测量 第1部分：统计旁路法 |
Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical pass-by method (ISO 11819-1:1997) |
| EN ISO 9902-1-2001 |
纺织机械 噪声试验规范 第1部分：通用要求 |
Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001) |
| EN ISO 1680-1999 |
声学 测定旋转式电机发射的空气声的试验规程 |
Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machinery (ISO 1680:1999) |
| EN 60704-3-1994 |
家用和类似用途电器辐射气载噪声的测定用试验规范 第3部分：测量和检验宣称噪声发出值的规程 |
Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Part 3: Procedure for determining and verifying declared noise emission values (IEC 60704-3:1992) |
| EN 50332-1-2000 |
声学系统设备：与便携式音频设备有关的头戴耳机和耳机 最大声压级测量方法及极限值的研究 第1部分： "一 |
Sound system equipment: Headphones and earphones associated with portable audio equipment - Maximum sound pressure level measurement methodology and limit considerations - Part 1: General method for "one package equipment" |
| EN ISO 9902-4-2001 |
纺织机械 噪声试验规范 第4部分：纱线加工机和制绳机 |
Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-3:2001) |
| EN ISO 9902-5-2001 |
纺织机械 噪声试验规范 第5部分：编织和针织准备机 |
Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001) |
| EN ISO 4871-1996 |
声学 机器和设备噪声辐射值的确定和检测 |
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN 60118-0-1993 |
助听器 第0部分：电声特性的测量 |
Hearing aids; part 0: measurement of electroacoustical characteristics (IEC 60118-0:1983) |
| EN ISO 9902-7-2001 |
纺织机械 噪声试验规范 第7部分：印染机及精整机 |
Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001) |
| EN ISO 11688-2-2000 |
声学 低噪声机器和设备设计的推荐实用规程 第2部分：低噪声设计的物理工程说明 |
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998) |
| EN 60118-6-1999 |
助听器 第6部分：助听器输入电路的特性 |
Hearing aids - Part 6: Characteristics of electrical input circuits for hearing aids (IEC 60118-6:1999) |
| EN 61012-1998 |
伴有超声情况下可听声测量用滤波器 |
Filters for the measurement of audible sound in the presence of ultrasound (IEC 61012:1990) |
| EN ISO 11203-1995 |
声学 机器和设备发射的噪声 从声功率级测定工作位置和其他指定位置发射声压级 |
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
| EN ISO 11689-1996 |
声学 机器和设备发射噪声数据的比较方法 |
Acoustics - Procedure for the comparison of noise emission-data for machinery and equipment (ISO 11689:1996) |
| EN 60118-13-1997 |
助听器 第13部分：电磁兼容性(EMC)? |
Hearing aids - Part 13: Electromagnetic compatibility (EMC) (IEC 60118-13:1997) |
| EN 1793-2-1997 |
道路交通噪声减低装置 声学性能测定的试验方法 第2部分：气载声音绝缘的固有特性 |
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation |
| EN 1793-1-1997 |
道路交通噪声减低装置 测定声学性能的试验方法 第1部分：声音吸收的本征特性 |
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption |
| EN 60318-3-1998 |
电声学 人的头和耳模拟器 第3部分：用于听力测定计的超听力耳机校正用声耦合器 |
Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry (IEC 60318-3:1998) |
| EN 61027-1993 |
声学阻抗/导纳测量用仪器 |
Instruments for the measurement of aural acoustic impedance/admittance (IEC 61027:1991) |
| EN 60034-9-1997 |
旋转电机 第9部分：噪声限值 |
Rotating electrical machines - Part 9: Noise limits (IEC 60034-9:1997) |
| EN 1793-3-1997 |
道路交通噪声减低装置 声学性能测定的试验方法 第3部分：标准化交通噪声频谱 |
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 3: Normalized traffic noise spectrum |
| EN 61043-1994 |
电声学 声强测量仪 压强传声器配对的测量 |
Electroacoustics; Instruments for the measurement of sound intensity; Measurement with pairs of pressure sensing microphones (IEC 61043:1993) |
| EN 60534-8-3-2000 |
工业流程控制阀 .第8-3部分 噪声问题 通过控制阀的动力噪声预测法 |
Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method (IEC 60534-8-3:2000) |
| ENV 1993-4-2-1999 |
欧洲法典 3：钢结构设计 第4-2部分：竖井、蓄水池和管道 蓄水池 |
Eurocode 3: Design of steel structures - Part 4-2: Silos, tanks and pipelines - Tanks |
| EN 12053-2001 |
工业卡车的安全 噪声发射测量的试验方法 |
Safety of industrial trucks - Test methods for measuring noise emissions |
| EN 61094-1-2000 |
测量传声器 第1部分：实验室标准传声器规范 |
Measurement microphones - Part 1: Specifications for laboratory standard microphones (IEC 61094-1:2000) |
| EN 60704-2-7-1998 |
测定家用和类似用途电器辐射气载噪声的试验规范 第2－7部分：电风扇的特殊要求 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-7: Particular requirements for fans (IEC 60704-2-7:1997) |
| EN 60704-2-8-1997 |
家用及类似用途电气装置发出空气噪声测定的试验规范 第2－8部分：电动剃须刀的特殊要求 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-8: Particular requirements for electric shavers (IEC 60704-2-8:1997) |
| EN 60118-12-1996 |
助听器 第12部分：电子连接器系统的尺寸 |
Hearing aids - Part 12: Dimensions of electrical connector systems (IEC 60118-12:1996) |
| EN 61094-2-1993 |
测量传声器 第2部分：用互易技术对实验室标准传声器进行压力校准的基本方法 |
Measurement microfones; Part 2: primary method for pressure calibration of laboratory standard microphones by the reciprocity technique (IEC 61094-2:1992) |
| EN ISO 9902-6-2001 |
纺织机械 噪声试验规范 第6部分：织物制造机 |
Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001) |
| EN 61063-1996 |
声学 汽轮机和被驱动机械发出的空气传播噪音的测量 |
Acoustics - Measurement of airborne noise emitted by steam turbines and driven machinery (IEC 61063:1991) |
| EN 61265-1995 |
电声学 航空噪声测量仪器 在运输机噪声鉴定中测量三分之一宽带倍频声压级装置的性能要求 |
Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aeroplanes (IEC 61265:1995) |
| EN 61094-3-1995 |
测量传声器 第3部分：用互易技术对实验室标准传声器进行自由场校准的基本方法 |
Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique (IEC 61094-3:1995) |
| EN ISO 11821-1997 |
声学 可移动声屏障声衰减的现场测量 |
Acoustics - Measurement of the in situ sound attenuation of a removable screen (ISO 11821:1997) |
| EN ISO 9902-2-2001 |
纺织机械 噪声试验规范 第2部分：纺纱准备机和纺纱机械 |
Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001) |
| EN ISO 14509-2000 |
小艇 由机动游艇所发出空气噪声的测定 |
Small craft - Measurement of airborne sound emitted by powered recreational craft (ISO 14509:2000) |
| EN 61094-5-2001 |
测量传声器 第5部分：用比较法对工作标准传声器进行压力校准的方法 |
Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison (IEC 61094-5:2001) |
| EN ISO 11957-1996 |
声学 客舱隔声性能的测定 实验室测量和现场测量 |
Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996) |
| EN 60118-14-1998 |
助听器 第14部分：数字接口装置的规范 |
Hearing aids - Part 14: Specification of a digital interface (IEC 60118-14:1998) |
| EN ISO 9902-3-2001 |
纺织机械 噪声试验规范 第3部分：无纺机械 |
Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001) |
| EN 61094-4-1995 |
测量传声器 第4部分：传声器工作标准的规范 |
Measurement microphones - Part 4: Specifications for working standard microphones (IEC 61094-4:1995) |
| EN ISO 14163-1998 |
声学 采用消声器的噪声控制指南 |
Acoustics - Guidelines for noise control by silencers (ISO 14163:1998) |
| EN 60318-2-1998 |
电声学 人的头和耳模拟器 第2部分：在扩展的高频范围内测听力耳机校正用间歇听力耦合器 |
Electroacoustics - Simulators of human head and ear - Part 2: An interim acoustic coupler for the calibration of audiometric earphones in the extended high-frequency range (IEC 60318-2:1998) |
| EN ISO 11820-1996 |
声学 消声器的现场测量 |
Acoustics - Measurements on silencers in situ (ISO 11820:1996) |
| EN 61101-1993 |
0.5MHz至15MHz频率范围内采用平面扫描技术对水听器的绝对校准 |
The absolute calibration of hydrophones using the planar scanning technique in the frequency range 0,5 MHz to 15 MHz (IEC 61101:1991) |
| EN 60034-14-1996 |
旋转电机 第14部分：轴中心高56mm及以上的电机机械振动 振动的测量、评价和限值 |
Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration (IEC 60034-14:1996) |
| EN 13486-2001 |
用于测量冷藏、冷冻、深冷/速冻食品和冰激凌运输、贮存和分发过程中空气和产品温度的温度计 定期检定 |
Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Periodic verification |
| EN ISO 15667-2000 |
声学 采用隔声罩和隔声小室的噪声控制指南 |
Acoustics - Guidelines for noise control by enclosures and cabins (ISO 15667:2000) |
| EN 61157-1994 |
对医疗超声波诊断设备声输出的要求 |
Requirements for the declaration of the acoustic output of medical diagnostic ultrasonic equipment (IEC 61157:1992) |
| EN 13523-2-2001 |
喷镀金属圈材 试验方法 第2部分：镜面光泽度 |
Coil coated metals - Test methods - Part 2: Specular gloss |
| EN 50113-1994 |
测量、控制、调节电温度传感器热电偶用绝缘管 |
Measurement, control, regulation - Electrical temperature sensors - Isolating tubes for thermocouples |
| EN 1299-1997 |
机械振动和冲击 机械振动隔离 关于源隔离应用信息 |
Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation |
| HD 483.17 S1-1992 |
声系统设备 第17部分：标准音量指示器 |
Sound system equipment; Part 17: Standard volume indicators (IEC 60268-17:1990) |
| EN 13523-3-2001 |
喷镀金属圈材 试验方法 第3部分：色差 仪器比较 |
Coil coated metals - Test methods - Part 3: Colour difference; Instrumental comparison |
| EN 50212-1996 |
热电传感器用连接器 |
Connectors for thermoelectric sensors |
| EN 30326-1-1994 |
机械振动 评价车座振动实验方法 第1部分:基本要求 |
Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:1992) |
| EN 12470-4-2000 |
临床温度计 第4部分：用于连续测量的电子温度计的性能 |
Clinical thermometers - Part 4: Performance of electrical thermometers for continuous measurement |
| HD 590 S1-1991 |
骨振器测量用机械耦合器 |
Mechanical coupler for measurements on bone vibrators (IEC 60373:1990) |
| EN 60584-2-1993 |
热电偶 第2部分：公差 |
Thermocouples; Part 2: Tolerances (IEC 60584-2:1982 + A1:1989) |
| EN 60994-1992 |
水力机械(水轮机、蓄水泵和水轮泵)振动和脉动的现场测量指南 |
Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines) (IEC 60994:1991) |
| EN 50112-1994 |
测量、控制、调节电温度传感器TC组装用金属保护管 |
Measurement, control, regulation - Electrical temperature sensors - Metal protecting tubes for TC assemblies |
| EN ISO 3743-2-1996 |
声学 噪声源的声功率级的测定 混响声场中小型可移动声源的工程法 第2部分：专用混响试验室法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) |
| EN 61373-1999 |
铁路应用 机车车辆设备 冲击和振动试验 |
Railway applications - Rolling stock equipment - Shock and vibration tests (IEC 61373:1999) |
| EN 61152-1994 |
金属护套温度计元件尺寸 |
Dimensions of metal-sheathed thermometer elements (IEC 61152:1992, modified) |
| EN ISO 7029-2000 |
声学 听阈和年龄的关系的统计分布 |
Acoustics - Statistical distribution of hearing thresholds as a function of age (ISO 7029:2000) |
| EN 60584-1-1995 |
热电偶 第1部分：参考表 |
Thermocouples - Part 1: Reference tables (IEC 60584-1:1995) |
| EN 13523-10-2001 |
喷镀金属圈材 试验方法 第10部分：抗荧光紫外光和抗水凝结性 |
Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV light and water condensation |
| EN 60909-0-2001 |
三相交流系统短路 第0部分：电流计算 |
Short-circuit currents in three-phase AC systems - Part 0: Calculation of currents (IEC 60909-0:2001) |
| EN ISO 11691-1995 |
声学 无气流管道消声器插入损失的测量 实验室测量法 |
Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995) |
| EN 61515-1996 |
矿物绝缘热电偶电缆和热电偶 |
Mineral insulated thermocouple cables and thermocouples (IEC 61515:1995) |
| EN 1434-3-1997 |
热量表 第3部分：数据交换和接口 |
Heat meters - Part 3: Data exchange and interfaces |
| EN 60044-6-1999 |
互感器 第6部分：保护用电流互感器的暂态特性要求 |
Instrument transformers - Part 6: Requirements for protective current transformers for transient performance (IEC 60044-6:1992, modified) |
| EN 60051-4-1989 |
直接作用模拟指示电测量仪表及其附件 第4部分：频率表的特殊要求（IEC 60051-4:1984） |
Direct acting indicating analogue electrical measuring instruments and their accessories; Part 4: Special requirements for frequency meters (IEC 60051-4:1984) |
| HD 446.3 S1-1993 |
热电偶 第3部分：扩展和补偿电缆 公差和识别系统 |
Thermocouples; Part 3: Extension and compensating cables; Tolerances and identification system (IEC 60584-3:1989, modified) |
| EN 12470-1-2000 |
临床温度计 第1部分：配备最大器件的金属玻璃中液体体温计 |
Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device |
| EN 61966-5-2001 |
多媒体系统和设备 色彩测量和管理 第5部分：使用等离子显示屏的设备 |
Multimedia systems and equipment - Colour measurement and management - Part 5: Equipment using plasma display panels (IEC 61966-5:2000) |
| EN 60051-6-1989 |
直接作用模拟指示电测量仪表及其附件 第6部分：欧姆表（阻抗表）和电导表的特殊要求 |
Direct acting indicating analogue electrical measuring instruments and their accessories; Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters (IEC 60051-6:1984) |
| EN 50147-1-1996 |
消声室 第1部分：屏蔽消声测量 |
Anechoic chambers - Part 1: Shield attenuation measurement |
| EN 13190-2001 |
指针式温度计 |
Dial thermometers |
| EN 61966-8-2001 |
多媒体系统和设备 色彩测量和管理 第8部分：多媒体彩色扫描仪 |
Multimedia systems and equipment - Colour measurement and management - Part 8: Multimedia colour scanners (IEC 61966-8:2001) |
| EN 60051-7-1989 |
直接作用模拟指示电测量仪表及其附件 第7部分：多功能仪表的特殊要求（IEC 60051-7:1984） |
Direct acting indicating analogue electrical measuring instruments and their accessories; Part 7: Special requirements for multi-function instruments (IEC 60051-7:1984) |
| EN 12470-2-2000 |
临床温度计 第2部分：相变型（点阵）温度计 |
Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers |
| EN 13485-2001 |
用于测量冷藏、冷冻、深冷/速冻食品和冰激凌运输、贮存和分发过程中空气和产品温度的温度计 试验、性能和 |
Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick frozen food and ice cream - Tests, performance, suitability |
| EN 61966-9-2000 |
多媒体系统和设备 色彩测量和管理 第9部分：数字照相机 |
Multimedia systems and equipment - Colour measurement and management - Part 9: Digital cameras (IEC 61966-9:2000) |
| EN 50147-2-1996 |
消声室 第2部分：适合于现场消音的可选择的试验现场 |
Anechoic chambers - Part 2: Alternative test site suitability with respect to site attenuation |
