| 标准号 |
中文名 |
英文名 |
| prEN 4438-1997 |
航空航天系列 金属材料 试验方法 用透明石英膨胀仪测试固体材料线性热膨胀 |
Aerospace series - Metallic materials - Test methods - Linear thermal expansion of solid materials with a vitreous silica dilatometer |
| EN ISO 3952-1-1994 |
运动图 图形符号 第1部分 |
Kinematic diagrams - Graphical symbols - Part 1 (ISO 3952-1:1981) |
| EN 21942-2-1992 |
牙科词汇 第2部分：牙科材料 |
Dental vocabulary; part 2: dental materials (ISO 1942-2:1989) |
| EN ISO 3952-2-1994 |
运动图 图形符号 第2部分 |
Kinematic diagrams - Graphical symbols - Part 2 (ISO 3952-2:1981) |
| EN 21942-3-1993 |
牙科词汇 第3部分：牙科器械 |
Dental vocabulary; part 3: dental instruments (ISO 1942-3:1989) |
| EN 472-1994 |
压力计 词汇 |
Pressure gauges - Vocabulary |
| EN 12830-1999 |
冷藏、冷冻、深冷/速冻食品与冰淇淋的运输、贮存和配送用温度计 试验、性能与适用性 |
Temperature recorders for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Tests, performance, suitability |
| EN 24006-1993 |
封闭管道中液体流量的测量.名词和符号 |
Measurement of fluid flow in closed conduits; vocabulary and symbols (ISO 4006:1991) |
| EN 60051-1-1998 |
直接作用模拟指示电测量仪表及其附件 第1部分：定义和对所有部分通用的一般要求 |
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts (IEC 60051-1:1997) |
| HD 483.2 S2-1993 |
声系统设备 第2部分：通用术语解释和计算方法 |
Sound system equipment; part 2: explanation of general terms and calculation methods (IEC 60268-2:1987 + A1:1991) |
| EN ISO 772-2000 |
水文测验 词汇和符号 |
Hydrometric determinations - Vocabulary and symbols (ISO 772:1996) |
| EN 12901-1999 |
人类生活用水处理用制品 无机支撑和过滤材料 定义 |
Products used for treatment of water intended for human consumption - Inorganic supporting and filtering materials - Definitions |
| EN 633-1993 |
胶合刨花板 定义和分类 |
Cement-bonded particleboards; definition and classification |
| EN 61069-7-1999 |
工业过程测量和控制 系统评估用系统特性的评定 第7部分：系统安全评估 |
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety (IEC 61069-7:1999) |
| EN 13635-2001 |
灌溉技术 局部灌溉系统 术语和制造商提供的数据 |
Irrigation techniques - Localised irrigation systems - Terminology and data to be supplied by the manufacturer |
| EN 61069-8-1999 |
工业过程测量和控制 系统评估用系统特性的评定 第8部分：非任务相关系统性能的评估 |
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of non-task-related system properties (IEC 61069-8:1999) |
| EN 844-1-1995 |
圆木和锯木 术语 第1部分：圆木和锯木的通用术语 |
Round and sawn timber - Terminoloy - Part 1: General terms common to round timber and sawn timber |
| EN 61131-5-2001 |
可编程控制器 第5部分：通信 |
Programmable controllers - Part 5: Communications (IEC 61131-5:2000) |
| EN 13188-2000 |
醋 由农业来源液体制成的产品 定义、要求和标志 |
Vinegar - Product made from liquids of agricultural origin - Definitions, requirements, marking |
| EN 844-2-1997 |
圆木和锯木 术语 第2部分：与圆木有关的通用术语 |
Round and sawn timber - Terminology - Part 2: General terms relating to round timber |
| EN 61131-7-2000 |
可编程控制器 第7部分：模糊控制编程 |
Programmable controllers - Part 7: Fuzzy control programming (IEC 61131-7:2000) |
| EN 12302-2000 |
原焦油和粗苯 术语 |
Crude tar and crude benzole - Terminology |
| EN 844-3-1995 |
圆木和锯木 术语 第3部分：与锯木有关的通用术语 |
Round and sawn timber - Terminoloy - Part 3: General terms relating to sawn timber |
| CR 12894-1997 |
生物技术 微生物 现有各种动物性病原体目录的检查和报告编制 |
Biotechnology - Microorganisms - Examination of the various existing lists of animal pathogens and production of a report |
| EN 12303-2000 |
煤焦油机油 术语 |
Coal tar based oils - Terminology |
| prEN 783-1992 |
宽平头结构螺栓用六角螺母 类型1 产品等级B 性能级别10 |
Hexagon nuts for structural bolting with large width across flats, style 1; product grade B; property class 10 |
| EN 844-4-1997 |
圆木和锯木 术语 第4部分：与含水量有关的术语 |
Round and sawn timber - Terminology - Part 4: Terms relating to moisture content |
| prEN 1366-7-2001 |
服务设施的耐火试验 第7部分：输送设备和有轨输送系统的闭合度 |
Fire resistance tests for service installations - Part 7: Closures for conveyors and trackbound transportation systems |
| prEN 14281-2001 |
地下电缆管道的塑料管线系统 聚乙烯 塑料管、管件及管线规范 |
Plastics piping systems for buried cable ducting - Polyethylene (PE) - Specifications for pipes, fittings and the system |
| EN 844-5-1997 |
圆木和锯木 术语 第5部分：与圆木尺寸有关的术语 |
Round and sawn timber - Terminology - Part 5: Terms relating to dimensions of round timber |
| prEN 60839-7-2-2000 |
报警系统 第7－2部分：报警传输系统中串行数据接口用报文格式和协议 公共应用层协议 草案 |
Alarm systems - Part 7-2: Message formats and protocols for serial data interfaces in alarm transmission systems; Common application layer protocol |
| EN 844-7-1997 |
圆木和锯木 术语 第7部分：与木材剖面结构有关的术语 |
Round and sawn timber - Terminology - Part 7: Terms relating to anatomical structure of timber |
| EN 844-6-1997 |
圆木和锯木 术语 第6部分：与锯木尺寸有关的术语 |
Round and sawn timber - Terminology - Part 6: Terms relating to dimensions of sawn timber |
| prEN 12624-1996 |
工业、商业和汽车库大门和活动门 操作噪声 要求和试验方法 |
Industrial, commercial and garage doors and gates - Operational noise - Requirements and test methods |
| EN 844-8-1997 |
圆木和锯木 术语 第8部分：与圆木性能有关的术语 |
Round and sawn timber - Terminology - Part 8: Terms relating to features of round timber |
| prEN 45513-1994 |
采购指南 管道系统和阀 包括支架的高压管线 |
Guide for procurement - Pipework and valves - High pressure piping including supports |
| EN 844-9-1997 |
圆木和锯木 术语 第9部分：与锯木性能有关的术语 |
Round and sawn timber - Terminology - Part 9: Terms relating to features of sawn timber |
| prEN 61520-1999 |
温度计敏感器用金属温度计套管 功能尺寸 |
IEC 61520: Metal thermowells for thermometer sensors - Functional dimensions |
| prEN 1796-3-1995 |
有或无压力供水用塑料管道系统聚合物树脂（UP）基玻璃纤维增强热固性塑料（GRP） 第3部分：管件 |
Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Part 3: Fittings |
| EN 844-10-1998 |
圆木和锯木 术语 第10部分：与斑渍和真菌侵害有关的术语 |
Round and sawn timber - Terminology - Part 10: Terms relating to stain and fungal attack |
| EN 844-11-1998 |
圆木和锯木 术语 第11部分：与昆虫引起的降级有关的术语 |
Round and sawn timber - Terminology - Part 11: Terms relating to degrade by insects |
| prEN 186540-1999 |
单模光纤通信系统用连接器产品规范 端接IEC 60793-2 A1a和A1b类光纤的SG型 |
Product specification for connector set to be used in multimode optical fibre communication systems - Type SG terminated on IEC 793-2 category A1a and A1b fibre |
| prEN 10309-1999 |
岸上和海上管路钢管及配件 外表环氧树脂粉末涂层 |
Steel tubes and fittings for onshore and offshore pipelines - External epoxy powder coating |
| EN 844-12-2000 |
圆木和锯木 术语 第12部分：附加术语和总索引 |
Round and sawn timber - Terminology - Part 12: Additional terms and general index |
| EN 923-1998 |
粘合剂 术语和定义 |
Adhesives - Terms and definitions |
| EN 61008-1/prAA-2001 |
家用和类似用途的没有综合过电流保护的剩余电流断路器（RCCBs）第１部分：通用规则 修改草案ＡＡ |
Draft amendment to IEC 61008-1, Ed. 2: Requirements for use of fuses instead of silver wires as SCPD at the short-circuit tests of RCCBs |
| EN 12775-2001 |
实心木板 分类和术语 |
Solid wood panels - Classification and terminology |
| EN 12481-2000 |
自粘带 术语 |
Self adhesive tapes - Terminology |
| EN 1094-1-1997 |
绝缘耐火产品 第1部分：陶瓷纤维产品术语 |
Insulating refractory products - Part 1: Terminology for ceramic fibre products |
| EN 235-2001 |
墙面饰层 术语和符号 |
Wallcoverings - Vocabulary and symbols |
| EN 1096-1-1998 |
建筑物玻璃 涂层玻璃 第1部分：定义和分类 |
Glass in building - Coated glass - Part 1: Definitions and classification |
| EN 12701-2001 |
结构胶粘剂 贮藏 有关结构粘合剂和相关材料的产品寿命的词和短语的规定 |
Structural adhesives - Storage - Determination of words and phrases relating to the product life of structural adhesives and related materials |
| EN 303-4-1999 |
供暖锅炉 第4部分：强制通风式燃烧器的供暖锅炉 带输出功率最高为70KW和最大工作压力为3bar的强制通风式 |
Heating boilers - Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar - Terminology, special requirements, testing and ma |
| EN ISO 12543-1-1998 |
建筑玻璃 夹层玻璃和夹层安全玻璃 第1部分：定义和零部件的描述 |
Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:1998) |
| EN 60893-1-1994 |
电工用热固性树脂基工业刚性层压板规范 第1部分：定义、名称和一般要求 |
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements (IEC 60893-1:1987) |
| EN 303-5-1999 |
供暖锅炉 第5部分：固体燃料、人工和自动供料、额定热输出不超过300kW的供暖锅炉 术语、要求、测试和标志 |
Heating boilers - Part 5: Heating boilers for solid fuels, hand and automatically stocked, nominal heat output of up to 300 kW - Terminology, requirements, testing and marking |
| prEN ISO 16137-2001 |
工业用阀门 热塑性材料制防逆阀 |
Industrial valves - Check valves of thermoplastic materials (ISO/DIS 16137:2001) |
| EN ISO 472-2001 |
塑料 词汇 |
Plastics - Vocabulary (ISO 472:1999) |
| prEN ISO 17641-3-2000 |
金属焊缝的无损检查 焊件的热裂开检查 第3部分：外加荷载检查 |
Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Part 3: Externally loaded tests (ISO/DIS 17641-3:2000) |
| EN 459-1-2001 |
建筑石灰 第1部分：定义、规范和合格准则 |
Building lime - Part 1: Definitions, specifications and conformity criteria |
| prEN 14430-2002 |
釉瓷和搪瓷 高压试验 |
Vitreous and porcelain enamels - High voltage test |
| EN ISO 1043-1-2001 |
塑料 符号和缩略语 第1部分：基本聚合物及其特性 |
Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2001) |
| EN 932-6-1999 |
集料的一般性能试验 第6部分：可重复性和可再生性定义 |
Tests for general properties of aggregates - Part 6: Definitions of repeatability and reproducibility |
| prENV 50283-1997 |
0级VHDL合成语法和语义学 |
Level-0 VHDL synthesis syntax and semantics |
| EN ISO 10082-1999 |
塑料 酚醛树脂 分类和试验方法 |
Plastics - Phenolic resins - Classification and test methods (ISO 10082:1999) |
| EN 934-2-2001 |
混凝土、灰泥和水泥的添加剂 第2部分：混凝土添加剂 定义、要求、一致性、标志和标签 |
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures; Definitions, requirements, conformity, marking and labelling |
| prEN 61280-3-5-1998 |
光纤通信子系统基本试验程序 第3-5部分：模拟系统试验程序 视频系统交叉调制测量 |
IEC 61280-3-5: Fibre optic communication subsystem basic test procedures - Part 3-5: Test procedures for analogue systems - Cross modulation measurement for video systems |
| EN 643-2001 |
纸和板 回收纸和板的欧洲标准等级表 |
Paper and board - European list of standard grades of recovered paper and board |
| EN 1264-1-1997 |
地板加热 系统和组件 第1部分：定义和符号 |
Floor heating - Systems and components - Part 1: Definitions and symbols |
| EN 12433-2-1999 |
工业、商业和车库门、大门 术语 第2部分：门部件 |
Industrial, commercial and garage doors and gates - Terminology - Part 2: Parts of doors |
| EN 971-1-1996 |
色漆和清漆 涂层材料的术语和定义 第1部分：一般术语 |
Paints and varnishes - Terms and definitions for coating materials - Part 1: General terms |
| EN 1504-1-1998 |
混凝土结构保护和修理用的产品和系统 定义、要求、质量控制和合格评定 第1部分：定义 |
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions |
| HD 402 S2-1984 |
低频电缆和电线绝缘用热塑材料的标准颜色 |
Standard colours for thermoplastic materials used for the insulation for low-frequency cables and wires |
| EN ISO 4617-2000 |
色漆和清漆 系列等效术语表 |
Paints and varnishes - List of equivalent terms (ISO 4617:2000) |
| ENV 1504-9-1997 |
混凝土结构的保护和修理用产品和系统 定义、要求、质量控制和合格评定 第9部分：使用产品和系统的一般规 |
Products and systems for the protection and repair of concrete structures - Definitons, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems |
| HD 457 S1-1985 |
颜色名称代码 |
Code for designation of colours |
| EN 1438-1998 |
木材和木制品符号 |
Symbols for timber and wood-based products |
| EN 12056-1-2000 |
建筑物内的重力排水系统 第1部分：一般性能要求 |
Gravity drainage systems inside buildings - Part 1: General and performance requirements |
| EN ISO 4618-2-1999 |
色漆和清漆 涂覆材料的术语和定义 第2部分：与涂料特性有关的特殊术语 |
Paints and varnishes - Terms and definitions for coating materials - Part 2: Special terms relating to paint characteristics and properties (ISO 4618-2:1999) |
| EN 12527-1998 |
脚轮和轮子 试验方法和试验设备 |
Castors and wheels - Test methods and apparatus |
| EN 12433-1-1999 |
工业、商业和车库门、大门 术语 第1部分：门类型 |
Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors |
| prEN 60641-2-2002 |
电工用压纸板和薄纸板规范板 第２部分：试验方法 |
IEC 60641-2, Ed. 2: Pressboard and presspaper for electrical purposes - Part 2: Methods of test |
| EN 13103-2001 |
铁路设施 轮组和转向架 非主动轴 设计方法 |
Railway applications - Wheelsets and bogies - Non-powered axles; Design method |
| prEN 60670-25-2000 |
|
Draft IEC 60670-25 Ed.1: Boxes and enclosures for electrical accessories for houshold and similar fixed electrical installations - Part 25: Particular requirements for enclosures for housing protective devices and similar power consuming devices |
| prEN 60298-2002 |
额定电压1KV以上至52KV及以下交流金属封闭开关设备和控制设备 |
AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
| EN 13104-2001 |
铁路设施 轮组和转向架 主动轴 设计方法 |
Railway applications - Wheelsets and bogies - Powered axles; Design method |
| EN 60445-2000 |
人机界面、标志和标识的基本原则和安全原则 设备端子和特定导线的线端标识 包括字母数字系统的一般规则 |
Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and of terminations of certain designated conductors, including general rules for an alphanumeric system (IEC 60445:1999) |
| prEN 60614-2-7-1995 |
电气装置用导管规范 第２部分：导管的特殊规范 第７节：无螺纹铝合金刚性导管 |
Draft IEC 614-2-7: Conduits for electrical installations - Specification - Part 2: Particular specifications for conduits - Section 7: Rigid non-threadable conduits of aluminium alloy |
| prEN 45520-1994 |
采购指南 电气设备 变压器 |
Guide for procurement - Electrical equipment - Transformers |
| EN 1069-2-1999 |
高度在2M及其以上的水滑道 第2部分：说明 |
Water slides of 2 m height and more - Part 2: Instructions |
| EN 60146-1-1/prA2-1998 |
半导体变流器 第1-1部分：一般要求和电网换相变流器 基本要求规范 修改prA2 |
Amendment 2 to IEC 60146-1-1:1991 regarding insulation co-ordination |
| prEN 61128-1993 |
交流隔离器 由隔离器转变总线变换电流 |
Alternating current disconnectors; bus-transfer current switching by disconnectors (IEC 61128:1992) |
| EN 23758-1993 |
纺织品 使用符号的保养标签规则 |
Textiles; Care labelling code using symbols (ISO 3758:1991) |
| prEN 4375-1997 |
航空航天系列 非热处理耐热合金 NI-PH1301 (NiCr19Co18Mo4Ti3Al3) 锻坯 a 或D≤250 mm |
Aerospace series - Heat resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) non heat treated - Forging stock a or D 250 mm |
| prEN ISP 12067-2-1996 |
信息技术 国际标准化轮廓RB 中继连接方式网络服务 第2部分：与LAN子网相关与媒体不相关的要求 |
Information technology - International standardized profile RB - Relaying the connection-mode network service - Part 2: LANSubnetwork-dependent media-independent requirements (ISO/IEC ISP 12067-2:1996) |
| EN 27286-1991 |
电阻焊接设备的图形符号 |
Graphical symbols for resistance welding equipment (ISO 7286:1986) |
| prEN 61660-3-1998 |
电厂和变电站直流辅助设施中的短路电流 第3部分：计算举例 |
IEC 61660-3: Short-circuit currents in DC auxiliary installations in power plants and substations - Part 3: Examples of calculation |
| prEN 60079-19-1992 |
爆炸性环境用防爆电气设备 第19 部分：爆炸性环境（矿井或爆破场所除外）修理和大修 |
Electrical apparatus for explosive gas atmospheres; part 19: repair and overhaul for apparatus used in explosive atmospheres (other than mines or explosives) |
| prEN 2003-2-2000 |
航空航天系列 钢 试验方法 第2部分：艾卓德撞击试验 |
Aerospace series - Steels - Test methods - Part 2: Izod impact test |
| EN 60387-1992 |
交流电量表用符号 |
Symbols for alternating-current electricity meters (IEC 60387:1992) |
| EN 375-2001 |
制造商提供的专业用试管诊断试剂信息 |
Information supplied by the manufacturer with in vitro diagnostic reagents for professional use |
| EN 80416-1-2001 |
设备用图形符号基本原则 第1部分：原始符号创造 |
Basic principles for graphical symbols for use on equipment - Part 1: Creation of symbol originals (IEC 80416-1:2001) |
| ENV 13004-1999 |
用于管理数据交换的医疗设备命名系统 关于临时系统的建议和未来系统的原则 |
Nomenclature system for medical devices for the purposes of regulatory data exchange - Recommendations for an interim system and rules for a future system |
| EN 80416-2-2001 |
设备用图形符号基本原则 第2部分：箭头的形成和使用 |
Basic principles for graphical symbols for use on equipment - Part 2: Form and use of arrows (ISO 80416-2:2001) |
| EN ISO 780-1999 |
包装 货物搬运的图形标志 |
Packaging - Pictorial marking for handling of goods (ISO 780:1997) |
| EN ISO 9687-1995 |
牙科设备 图形符号 |
Dental equipment - Graphical symbols (ISO 9687:1993) |
| HD 450.11 S1-1985 |
助听器 第11部分：助听器和相关设备上的符号和其它标志 |
Hearing aids; Part 11: symbols and other markings on hearing aids and related equipment |
| EN 1861-1998 |
制冷系统和热泵 系统流程图和管道及仪表图表 平面图和符号 |
Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols |
| EN 22553-1994 |
焊接、硬钎焊和软钎焊连头 图样上的符号表示法 |
Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992) |
| EN 21942-1-1991 |
牙科词汇 第1部分：一般和临床术语 |
Dental vocabulary; part 1: general and clinical terms |
| EN ISO 4287-1998 |
产品几何量技术规范(GPS) 表面结构：轮廓法 表面结构的术语、定义及参数 |
Geometrical product specification (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997) |
| EN ISO 8785-1999 |
产品几何量技术规范（GPS） 表面缺陷 术语、定义和参数 |
Geometrical product specifications (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998) |
| EN ISO 10360-1-2000+AC-2002 |
产品几何量技术规范(GPS) 坐标测量机(CMM)的验收和复检试验 第1部分：词汇 |
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000) |
| EN ISO 3252-2000 |
粉末冶金 术语 |
Powder metallurgy - Vocabulary (ISO 3252:1999) |
| EN ISO 14660-1-1999 |
产品几何量技术规范(GPS) 几何要素 第1部分：基本术语和定义 |
Geometrical Product Specifications (GPS) - Geometrical features - Part 1: General terms and definitions (ISO 14660-1:1999) |
| EN ISO 8044-1999 |
金属与合金的腐蚀 基本术语和定义 |
Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:1999) |
| EN ISO 14660-2-1999 |
产品几何量技术规范(GPS) 几何要素 第2部分：圆柱体和圆锥体的提取中心线、提取中心面、提取要素的局部尺 |
Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature (ISO 14660-2:1999) |
| EN ISO 862-1995 |
表面活性剂 词汇 三种语言版 |
Surface active agents - Vocabulary - Trilingual version (ISO 862:1984/Cor. 1:1993) |
| EN 50272-2-2001 |
对次级蓄电池和安装蓄电池的安全要求 第2部分：固定蓄电池 |
Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries |
| EN 12440-2000 |
天然石料 命名准则 |
Natural stone - Denomination criteria |
| EN 12670-2001 |
天然石料 术语 |
Natural stone - Terminology |
| EN 12509-2001 |
架空线用木杆 试验方法 弹性系数、抗弯强度、密度和含水量的测定 |
Timber poles for overhead lines - Test methods - Determination of modulus of elasticity, bending strength, density and moisture content |
| EN 12597-2000 |
沥青和沥青胶粘剂 术语 |
Bitumen and bituminous binders - Terminology |
| prEN 925-1992 |
滑翔降落设备 术语 |
Paragliding equipment; nomenclature |
| EN 45020-1998 |
标准化和相关活动 一般术语 |
Standardization and related activities - General vocabulary (ISO/IEC Guide 2:1996) |
| EN 13847-2001 |
煤焦油和沥青基粘合剂及相关产品 术语和分类 |
Coal tar and pitch based binders and related products - Terminology and classification |
| EN ISO 10209-2-1996 |
技术产品文件 词汇 第2部分：有关投射方法的术语 |
Technical product documentation - Vocabulary - Part 2: Terms relating to projection methods (ISO 10209-2:1993) |
| EN 515-1993 |
铝和铝合金 锻制品 韧度表示方法 |
Aluminium and aluminium alloys; wrought products; Temper designations |
| EN 1325-1-1996 |
数值管理、数值分析、泛函分析词汇 第1部分：数值分析和泛函分析 |
Value management, value analysis, functional analysis vocabulary - Part 1: Value analysis and functional analysis |
| EN 10001-1990 |
生铁的定义和分类 |
Definition and classification of pig-irons |
| EN 10020-2000 |
钢的等级的定义和分类 |
Definition and classification of grades of steel |
| EN 13306-2001 |
维修术语 |
Maintenance terminology |
| EN 10079-1992 |
钢制品定义 |
Definition of steel products |
| ENV 13712-2000 |
邮政服务 形式 统一词汇 |
Postal services - Forms - Harmonized vocabulary |
| EN 12258-1-1998 |
铝和铝合金 术语和定义 第1部分：通用术语 |
Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
| EN ISO 9000-2000 |
质量管理体系 基础和词汇 |
Quality management systems - Fundamentals and vocabulary (ISO 9000:2000) |
| EN ISO 13666-1998 |
眼科光学 眼镜镜片 |
Ophthalmic optics - Spectacle lenses - Vocabulary (ISO 13666:1998) |
| prEN 13726-5-2000 |
原创口敷料试验方法 第5部分：防菌层特性 |
Test methods for primary wound dressings - Part 5: Bacterial barrier properties |
| EN 1659-1996 |
试管诊断系统 微生物的培养基 术语和定义 |
In vitro diagnostic systems - Culture media for microbiology - Terms and definitions |
| prEN 14431-2002 |
釉瓷和搪瓷 涂于结构用钢板的瓷釉的特性 |
Vitreous and porcelain enamels - Characteristics of the enamel coatings applied to steel panelsfor architecture |
| EN ISO 15225-2000 |
命名 用于管理资料交流的医疗器械命名系统规范 |
Nomenclature - Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange (ISO 15225:2000) |
| ENV ISO 11133-1-2000 |
食品和动物饲料的微生物学 培养基制备和生产指南 第1部分：实验室培养基制备的质量保证通用指南 |
Microbiology of food and animal feeding stuffs - Guidelines on preparation and production of culture media - Part 1: General guidelines on quality assurance for the preparation of culture media in the laboratory (ISO/TS 11133-1:2000) |
| EN 1085-1997 |
废水处理 词汇 |
Wastewater treatment - Vocabulary |
| EN 132-1998 |
呼吸保护装置 术语和象形图的定义 |
Respiratory protective devices - Definitions of terms and pictograms |
| CR 13436-1998 |
地理信息 词汇 |
Geographic information - Vocabulary |
| EN 1540-1998 |
工作场所的环境空气 术语 |
Workplace atmospheres - Terminology |
| EN 134-1998 |
呼吸保护装置 元部件命名 |
Respiratory protective devices - Nomenclature of components |
| CR 13217-1998 |
用于常规数据交换的医疗设备的术语体系 基本原理 |
Nomenclature system for medical devices for the purpose of regulatory data exchange - Rationale |
| EN 1846-1-1998 |
消防车和救援车 第1部分：名称和标识 |
Firefighting and rescue service vehicles - Part 1: Nomenclature and designation |
| EN 135-1998 |
呼吸保护装置 等义术语表 |
Respiratory protective devices - List of equivalent terms |
| CR 14230-2001 |
用于常规数据交换目的的全球医疗设备术语（ISO/TS 20225:2001） |
Global medical device nomenclature for the purpose of regulatory data exchange (ISO/TS 20225:2001) |
| EN 1868-1997 |
防坠落人员保护设备 等效术语表 |
Personal protective equipment against falls from a height - List of equivalent terms |
| EN 301140-1 V 1.1.1-1998 |
智能网（IN） 智能网应用规程（INAP） 能力集-2（CS2） 第1部分：协议规范 |
Intelligent Network (IN) - Intelligent Network Application Protocol (INAP) - Capability Set 2 (CS2) - Part 1: Protocol specification |
| EN 165-1995 |
个人眼睛保护装置 词汇 |
Personal eye-protection - Vocabulary |
| EN 12832-1999 |
污泥特性 污泥的利用和处置 词汇 |
Characterisation of sludges - Utilisation and disposal of sludges - Vocabulary |
| EN 13193-2000 |
包装 包装和环境 术语 |
Packaging - Packaging and the environment - Terminology |
| prEN ISO 14520-2-2000 |
气体灭火系统 物理特性和系统设计 第2部分：CF3I灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - Part 2: CF3I extinguishant (ISO/FDIS 14520-2:2000) |
| EN 292-1-1991 |
机械安全 设计用的基本概念、一般原则 第1部分：基本术语、方法论 |
Safety of machinery; basic concepts, general principles for design; part 1: basic terminology, methodology |
| EN 60695-4-1995 |
着火危险试验 第4部分：着火试验术语 |
Fire hazard testing - Part 4: Terminology concerning fire tests (IEC 60695-4:1993) |
| prEN 60695-2-3-1995 |
着火危险试验 第2部分：试验方法 第3节：用发热器不良连接试验 |
Fire hazard testing - Part 2: Test methods - Bad-connection test with heaters (IEC 60695-2-3:1984) |
| EN 614-1-1995 |
机械安全 人类工程学设计原则 第1部分：术语和一般原则 |
Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| EN ISO 10075-1-2000 |
与心理负荷有关的人类工效学原则 第1部分：一般术语和定义 |
Ergonomic principles related to mental work-load - Part 1: General terms and definitions (ISO 10075:1991) |
| EN 1005-1-2001 |
机械安全 人体物理性能 第1部分：术语和定义 |
Safety of machinery - Human physical performance - Part 1: Terms and definitions |
| EN ISO 13731-2001 |
热环境的人类工效学 词汇和符号 |
Ergonomics of the thermal environment - Vocabulary and symbols (ISO 13731:2001) |
| EN ISO 7345-1995 |
绝热 物理量和定义 |
Thermal insulation - Physical quantities and definitions (ISO 7345:1987) |
| EN ISO 13943-2000 |
消防安全 词汇 |
Fire safety - Vocabulary (ISO 13943:1999) |
| EN 1070-1998 |
机械安全 术语 |
Safety of machinery - Terminology |
| EN 26927-1990 |
房屋建造 勾缝用品 密封剂 词汇 |
Building construction-Jointing products; Sealants; Vocabulary (ISO 6927:1981) |
| EN ISO 9251-1995 |
绝热 传热状态和材料特性 词汇 |
Thermal insulation - Heat transfer conditions and properties of materials - Vocabulary (ISO 9251:1987) |
| EN 60743-2001 |
带电作业用工具和设备术语 |
Live working - Terminology for tools, equipment and devices (IEC 60743:2001) |
| EN 301163-1-1 V 1.1.1-1998 |
传输与多路复用传送（TM） 设备内异步转移模式（ATM）传输功能性的一般要求 第1-1部分：设备性能和功能特 |
Transmission and Multiplexing (TM) - Generic requirements of Asynchronous Transfer Mode (ATM) transport functionality within equipment - Part 1-1: Functional characteristics and equipment performance |
| EN ISO 9288-1996 |
绝热 辐射传热 物理量和定义 |
Thermal insulation - Heat transfer by radiation - Physical quantities and definitions (ISO 9288:1989) |
| HD 308 S2-2001 |
电缆芯和软线的识别 |
Identification of cores in cables and flexible cords |
| EN 3939-2001 |
航空航天系列 镍基合金 NI-B46001(NiCo20Si5B3) 钎焊用填缝金属粉末和糊料 |
Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing; Powder or paste |
| EN 301145-1 V 1.1.1-1998 |
综合业务数字网（ISDN） 1号数字用户信令系统（DSS1）协议 电信服务 第1部分：协议规范 |
Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No. one (DSS1) protocol - Teleaction service - Part 1: Protocol specification |
| EN ISO 9346-1996 |
绝热 传质 物理量和定义 |
Thermal insulation - Mass transfer - Physical quantities and definitions (ISO 9346:1987) |
| prEN ISO 10468-1999 |
塑料管 玻璃纤维增增强热固塑料管? 在湿环境中长期特殊环形蠕变劲度的测定及湿蠕变因子的计算 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor (ISO/DIS 10468:1999) |
| EN 300468 V 1.3.1-1998 |
数字视频广播（DVB） DVB系统的服务信息规范 |
Digital Video Broadcasting (DVB) - Specification for Service Information (SI) in DVB systems |
| EN 1317-1-1998 |
道路防护系统 第1部分：术语和试验方法通用标准 |
Road restraint systems - Part 1: Terminology and general criteria for test methods |
| EN 1330-1-1998 |
无损检测 术语 第1部分：通用术语表 |
Non-destructive testing - Terminology - Part 1: List of general terms |
| prENV 13381-1-2001 |
测定建筑物构件防火作用的试验方法 第1部分：水平保护膜 |
Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes |
| EN 131-1-1993 |
梯子 术语、类型和功能尺寸 |
Ladders; terms, types, functional sizes |
| EN 1330-2-1998 |
无损检测 术语 第2部分：无损检测方法通用术语 |
Non-destructive testing - Terminology - Part 2: Terms common to the non-destructive testing methods |
| EN 1900-1998 |
接触食品的材料和物品 非金属餐具 术语 |
Materials and articles in contact with foodstuffs - Non-metallic tableware - Terminology |
| EN 1330-3-1997 |
无损检测 术语 第3部分：工业X射线照相检测用术语 |
Non-destructive testing - Terminology - Part 3: Terms used in industrial radiographic testing |
| EN 1330-4-2000 |
无损检测 术语 第4部分：用于超声检测的术语 |
Non-destructive testing - Terminology - Part 4: Terms used in ultrasonic testing |
| EN 12466-1998 |
弹性地板覆盖物 词汇 |
Resilient floor coverings - Vocabulary |
| EN 1330-5-1998 |
无损检测 术语 第5部分：涡流检测用术语 |
Non-destructive testing - Terminology - Part 5: Terms used in Eddy Current testing |
| ENV 13233-1998 |
高级工艺陶瓷 陶瓷合成物 标志和符号 |
Advanced technical ceramics - Ceramic composites - Notations and symbols |
| EN 1330-8-1998 |
无损检测 术语 第8部分：密封性检测用术语 |
Non-destructive testing - Terminology - Part 8: Terms used in leak tightness testing |
| EN ISO 2162-3-1996 |
技术产品文件 弹簧 第3部分：词汇 |
Technical product documentation - Springs - Part 3: Vocabulary (ISO 2162-3:1993) |
| HD 245.1 S3-1979 |
电气技术用文字符号 第1部分：总则 |
Letter symbols to be used in electrical technology; part 1: general |
| EN 1330-9-2000 |
无损检测 术语 第9部分： 用于声发射检测的术语 |
Non-destructive testing - Terminology - Part 9: Terms used in acoustic emission testing |
| EN ISO 14588-2000 |
盲铆钉 术语和定义 |
Blind rivets - Terminology and definitions (ISO 14588:2000) |
| EN 2591-415-2001 |
航空航天系列 光电连接元件 试验方法 第415部分：测试探针损伤（塞孔接点） |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 415: Test probe damage (female contacts) |
| EN 60068-5-2-1999 |
环境试验 第5部分：起草试验方法的导则 术语和定义 |
Environmental testing - Part 5: Guide to drafting of test methods - Terms and definitions (IEC 60068-5-2:1990) |
| EN 736-1-1995 |
阀门 术语 第1部分：阀门类型定义 |
Valves - Terminology - Part 1: Definition of types of valves |
| EN 3567-003-2001 |
航空航天系列 与MIL-STD-1553B一致多元数据总线系统在线偶合器 第003部分：单内嵌偶合器 产品标准 |
Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 003: Single in-line couplers; Product standard |
| EN ISO 12706-2000 |
无损检测 术语 穿透试验用术语 |
Non-destructive testing - Terminology - Terms used in penetrant testing (ISO 12706:2000) |
| EN 12526-1998 |
脚轮和轮子 词汇 推荐用符号和多语种词表 |
Castors and wheels - Vocabulary, recommended symbols and multilingual dictionary |
| EN 736-2-1997 |
阀门 术语 第2部分：阀门组件定义 |
Valves - Terminology - Part 2: Definition of components of valves |
| prEN ISO 15465-2002 |
管道工程 条绕金属软管和软管组件 |
Pipework - Stripwound metal hoses and hose assemblies (ISO/DIS 15465:2002) |
| EN 13447-2001 |
电动汽车 术语 |
Electrically propelled road vehicles - Terminology |
| EN 814-1-1997 |
带有电驱动压缩机的热泵和空调器 制冷模型 第1部分：术语、定义和名称 |
Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 1: Terms, definitions and designations |
| EN 3730-2001 |
航空航天系列 具有橡胶缓冲的铝合金鞍壮固定和滑动型夹箍 尺寸质量 |
Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions, masses |
| EN 1083-1-1997 |
电刷 第1部分：定义和术语 |
Power-driven brushes - Part 1: Definitions and nomenclature |
| EN 1333-1996 |
管道工程元件 定义和PN的选择 |
Pipework components - Definition and selection of PN |
| EN 4019-2001 |
航空航天系列 钛合金管连接 8°30′90°焊接端弯头 |
Aerospace series - Pipe coupling 8?0 in titanium alloy - Elbows 90°welded end |
| EN 12345-1998 |
焊接 带图示的有关焊接接头的多语种术语 |
Welding - Multilingual terms for welded joints with illustrations |
| EN 4183-2001 |
航空航天系列 钛合金管连接8°30′ 焊接端 ９０°弯头 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Elbows 90?welded ends |
| prEN 12693-1996 |
制冷系统和热泵 安全和环境要求 制冷压缩机 |
Refrigerating systems and heat pumps - Safety and environmental requirements - Refrigerant compressors |
| EN 12508-2000 |
金属和合金的防腐 表面处理、金属和其它无机涂层 词汇 |
Corrosion protection of metals and alloys - Surface treatment, metallic and other inorganic coatings - Vocabulary |
| EN 12262-1998 |
旋动式泵 技术文件 术语、输出范围、设计 |
Rotodynamic pumps - Technical documents - Terms, delivery range, layout |
| EN 12584-1999 |
氧气火焰切割、激光束切割和等离子体切割的缺陷 术语 |
Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology |
| EN 12723-2000 |
液泵 泵和设备的通用术语 定义、参数、字母符号和单位 |
Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units |
| EN ISO 6947-1997 |
焊接 工作位置 倾角与转角的定义 |
Welds - Working positions - Definitions of angles of slope and rotation (ISO 6947:1993) |
| EN 25967-1989 |
丝锥和切制螺纹 主要类型的名称和词汇 |
Taps and thread cutting; nomenclature of the main types and terminology (ISO 5967:1981) |
| EN ISO 11593-1997 |
操作型工业机器人 末端执行器自动更换系统 词汇和特性表示 |
Manipulating industrial robots - Automatic end effector exchange systems - Vocabulary and presentation of characteristics (ISO 11593:1996) |
| EN ISO 8330-2000 |
橡胶和塑料软管和软管组件 词汇 |
Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:1998) |
| EN ISO 14539-2001 |
操作型工业机器人 用抓式钳子进行物品传递 词汇和特征表示 |
Manipulating industrial robots - Object handling with grasp-type grippers - Vocabulary and presentation of characteristics (ISO 14539:2000) |
| EN 25968-1989 |
圆板牙 术语 |
Circular screwing dies; terminology (ISO 5968:1981) |
| EN 657-1994 |
热喷雾 术语、分类 |
Thermal spraying; terminology, classification |
| EN 247-1997 |
热交换器 术语 |
Heat exchangers - Terminology |
| EN 61512-1-1999 |
按批控制 第1部分：模型和术语 |
Batch control - Part 1: Models and terminology (IEC 61512-1:1997) |
| prEN 4540-2001 |
航空航天系列 低振动状态下高负荷的自润滑衬套耐腐蚀钢球面普通轴承 技术规范 |
Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner; Elevated load under low oscillations - Technical specification |
| EN 255-1-1997 |
带电驱动压缩机的空调器、液体制冷设备和热力泵 加热方式 第1部分：术语、定义和标识 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 1: Terms, definitions and designations |
| EN ISO 4063-2000 |
焊接和相关工艺 工艺名称和参照代码 |
Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:1998) |
| prEN 12899-5-2002 |
固定立式公路交通标志 第5部分 首次型式试验 |
Fixed, vertical road traffic signs - Part 5: Initial type testing |
| EN 267-1999 |
强制通风燃油燃烧器 定义、要求、测试、标志 |
Forced draught oil burners - Definitions, requirements, testing, marking |
| prEN 130600-1992 |
分规范：1类陶瓷介质固定电容器 |
Sectional specification: fixed capacitors of ceramic dielectric, class 1 |
| EN ISO 4618-3-1999 |
色漆和清漆 涂覆材料的术语和定义 第3部分：表面制备和应用方法 |
Paints and varnishes - Terms and definitions for coating materials - Part 3: Surface preparation and methods of application (ISO 4618-3:1999) |
| EN 305-1997 |
热交换器 热交换器性能的定义和所有热交换器的构造性能的通用试验程序 |
Heat exchangers - Definitions of performance of heat exchangers and the general test procedure for establishing performance of all heat exchangers |
| prEN 288-10-1994 |
金属材料焊接程序规范和鉴定 第10部分：电子束焊的焊接程序规范 |
Specification and approval of welding procedures for metallic materials - Part 10: Welding procedure specification for electron beam welding |
| EN 378-1-2000 |
制冷系统和热泵 安全和环境要求 第1部分：基本要求、定义、分类和选择准则 |
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria |
| EN ISO 6520-2-2001 |
焊接和相关工艺 金属材料中几何缺陷的分类 第2部分：压力焊接 |
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure (ISO 6520-2:2001) |
| EN 12055-1998 |
带电驱动压缩机的液体冷却设备和热泵 冷却模式 定义、试验和要求 |
Liquid chilling packages and heat pumps with electrically driven compressors - Cooling mode - Definitions, testing and requirements |
| prEN 50134-1-2-1993 |
报警系统 公共报警系统 第1-2部分：应用指南 |
Alarm systems; social alarm systems; part 1-2: application guidelines |
| prEN 3847-1997 |
航空航天系列 色漆和清漆 沉淀值的测定 |
Aerospace series - Paints and varnishes - Determination of sedimentation rating |
| EN ISO 9488-1999 |
太阳能 词汇 |
Solar energy - Vocabulary (ISO 9488:1999) |
| prEN 2235-1999 |
航空航天系列 屏蔽和护套单芯和多芯电缆 |
Aerospace series - Single and multicore electric cables, screened and jacketed |
| CR 1830-1995 |
CIM系统结构 词汇 |
CIM systems architecture - Vocabulary |
| EN 60034-16-1-1995 |
旋转电机 第16部分：同步电机励磁系统 第1章：定义 |
Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Chapter 1: Definitions (IEC 60034-16-1:1991 + Corrigendum 1992) |
| CWA 13449-8-1998 |
金融服务扩展程序（XFS）接口规范 第8部分：保管箱设备类接口 程序员接口 |
Extensions for Financial Services (XFS) interface specification - Part 8: Depository Device Class Interface - Programmers Interface |
| CWA 13449-9-1998 |
金融服务扩展程序（XFS）接口规范 第9部分：文字终端设备类接口 程序员接口 |
Extensions for Financial Services (XFS) interface specification - Part 9: Text Terminal Unit Device Class Interface - Programmers Interface |
| EN 60071-1-1995 |
绝缘配合 第1部分：定义、原则和规则 |
Insulation co-ordination - Part 1: Definitions, principles and rules (IEC 60071-1:1993) |
| CWA 13849-12-2000 |
ActiveXFS接口规范 第12部分：ActiveXFS晚间保安目标接口规范 |
ActiveXFS interface specification - Part 12: ActiveXFS night safe object interface specification |
| prEN 784-1995 |
高强度结构螺栓用平垫圈、硬度和韧度 |
Plain washers for high-strength structural bolting, hardened and tempered |
| prEN ISO 12180-1-1999 |
产品几何量技术规范(GPS) 圆柱度 第1部分：词汇 |
Geometrical Product Specifications (GPS) - Cylindricity - Part 1: Vocabulary (ISO/DIS 12180-1:1999) |
| EN 60276-1996 |
碳刷、刷握、换向器和集电环的定义和名称 |
Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings (IEC 60276:1968 + A1:1987) |
| EN 61360-4-1997 |
电气元器件标准数据元素类型和相关分类模式 第4部分：IEC标准数据元素类型、元器件分类和项的基准集 |
Standard data element types with associated classification scheme for electric components - Part 4: IEC reference collection of standard data element types, component classes and terms (IEC 61360-4:1997) |
| prEN 14420-4-2002 |
带夹具的软管配件 第4部分：法兰连接 |
Hose fittings with clamp units - Part 4: Flange connections |
| EN 60464-1-1999 |
电气绝缘漆 第1部分：定义和一般要求 |
Varnishes used for electrical insulation - Part 1: Definitions and general requirements (IEC 60464-1:1998) |
| HD 384.2 S2-2001 |
国际电工词汇 第826章：建筑物的电气设施 |
International electrotechnical vocabulary - Chapter 826: Electrical installations of buildings (IEC 60050-826:1982 + A1:1990 + A2:1995 + A3:1999) |
| EN 60633-1999 |
高压直流电路(HVDC)传输用术语 |
Terminology for high-voltage direct current (HVDC) transmission (IEC 60633:1998) |
| EN 28653-1992 |
首饰 戒指尺寸 定义、测量和标记 |
Jewellery; ring sizes; definition, measurement and designation (ISO 8653:1986) |
| EN ISO 11145-2001 |
光学和光学仪器 激光和激光设备 词汇和符号 |
Optics and optical instruments - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2001) |
| EN 27418-1993 |
旅游居住车 词汇 |
Leisure accomodation vehicles; vocabulary (ISO 7418:1989) |
| EN 60674-1-1998 |
电工用塑料薄膜规范 第１部分：定义和一般要求 |
Specification for plastic films for electrical purposes - Part 1: Definitions and general requirements (IEC 60674-1:1980) |
| EN 61120-4-1992 |
专业用6.3mm磁带的数字音频盘式磁带盘录音系统 第4部分：磁带性能：定义和测量方法 |
Digital audio tape recorder; reel-to-reel system, using 6,3 mm magnetic tape, for professional use; part 4: magnetic tape properties: definitions and methods of measurement (IEC 61120-4:1992) |
| EN ISO 8092-2-2001 |
道路车辆 车载电气线束的连接 第2部分：定义、试验方法和一般性能要求 |
Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements (ISO 8092-2:2000) |
| EN 60763-1-1996 |
层压板规范 第1部分：定义 分类和一般要求 |
Specification for laminated pressboard - Part 1: Definitions, classification and general requirements (IEC 60763-1:1983) |
| EN 300462-1-1 V 1.1.1-1998 |
传输与多路复用技术（TM） 同步网的一般要求 第1-1部分：同步网的定义和术语 |
Transmission and Multiplexing (TM) - Generic requirements for synchronization networks - Part 1-1: Definitions and terminology for synchronization networks |
| ENV 1907-1999 |
用绳索运送乘客的安全要求 术语 |
Safety requirements for passenger transportation by rope - Terminology |
| EN 61067-1-1997 |
玻璃和玻璃聚酯纤维编织带规范 第1部分：定义、分类和一般要求 |
Specification for glass and glass polyester fibre woven tapes - Part 1: Definitions, classification and general requirements (IEC 61067-1:1991) |
| EN ISO 8384-2001 |
船舶与海上技术 挖泥船 词汇 |
Ships and marine technology - Dredgers - Vocabulary (ISO 8384:2000) |
| EN 1546-1-1999 |
识别卡系统 内部电子资金 第1部分：定义、概念和结构 |
Identification card systems - Inter-sector electronic purse - Part 1: Definitions, concepts and structures |
| EN 415-1-2000 |
包装机械安全 第1部分：包装机械及相关设备的术语和分类 |
Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment |
| EN 61068-1-1997 |
聚酯纤维机织带 第1部分：定义、名称和一般要求 |
Specification for polyester fibre woven tapes - Part 1: Definitions, designation and general requirements (IEC 61068-1:1991) |
| EN 1556-1998 |
条码 术语 |
Bar coding - Terminology |
| EN 12374-1998 |
包装 软管 术语 |
Packaging - Flexible tubes - Terminology |
| EN 13701-2001 |
空间系统 术语表 |
Space systems - Glossary of terms |
| ENV 12017-1997 |
医疗信息学 医疗信息学词汇( MIVoc ) |
Medical Informatics - Medical Informatics Vocabulary (MIVoc) |
| EN 12674-1-1999 |
车载集装箱 术语 |
Roll containers - Part 1: Terminology |
| prEN 13119-1997 |
幕墙 术语 |
Curtain walling - Terminology |
| ENV 13106-2000 |
公路交通和运输通信信息处理技术 DATAX通信传播数据词典（3.1a版） |
Road transport and traffic telematics - DATEX traffic and travel data dictionary (version 3.1a) |
| EN ISO 90-1-1999 |
薄壁金属容器 尺寸、容量的定义和测定 第1部分：顶开罐 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 1: Open-top cans (ISO 90-1:1997) |
| prEN 7001-1998 |
航空航天系列 工艺标准 表面处理标准的编写和表示的规则 |
Aerospace series - Process standards - Rules for the drafting and presentation of surface treatment standards |
| EN ISO 90-2-1999 |
薄壁金属容器 尺寸、容量的定义和测定 第2部分：一般用途的容器 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 2: General use containers (ISO 90-2:1997) |
| ENV 13606-2-2000 |
健康信息学 电子保健通讯 第2部分：区域术语表 |
Health informatics - Electronic healthcare communication - Part 2: Domain term list |
| EN ISO 90-3-2001 |
薄壁金属容器 尺寸、容量的定义和测定 第3部分：喷雾罐 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans (ISO 90-3:2000) |
| prEN 9130-2000 |
航空航天系列 质量体系 记录的保存 |
Aerospace series - Quality systems - Record retention |
| ENV 13608-1-2000 |
健康信息学 保健通讯安全性 第1部分：概念和术语 |
Health informatics - Security for healthcare communication - Part 1: Concepts and terminology |
| prEN 1317-5-2001 |
道路防护系统 第5部分：产品要求 耐用性和符合性评估 |
Road restraint systems - Part 5: Product requirements, durability and evaluation of conformity |
| prEN 50106-2-45-1996 |
标准图表：在EN 60335-2-45标准范围内的便携式电热工具及其类似电器的附加常规试验 |
Standard sheet: Additional routine tests for portable electric heating tools and similar appliances within the scope of EN 60335-2-45 |
| prEN 1709-1994 |
输送旅客的缆车安全要求 试运转前的检验 维护和操作试验 |
Safety requirements for cableways for passenger transport - Precommissioning inspection, maintenance and operational tests |
| prEN 54-13-2001 |
火灾探测和火灾警报系统 第13部分：系统要求和兼容性评定 |
Fire detection and fire alarm systems - Part 13: System requirements and compatibility assessment |
| prEN 12881-2-2000 |
传输带 燃烧模拟法可燃性试验 第2部分：大规模燃烧试验 |
Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test |
| prEN 13060-3-1997 |
小型蒸汽消毒器 第3部分：用于未包裹的实心制品消毒的N型消毒器的特殊要求和试验方法 |
Small steam sterilizers - Part 3: Particular requirements and test methods for type N sterilizers, intended for the sterilization of non-wrapped solid products |
| EN ISO 445-1998 |
搬运货物用平托盘 术语 |
Pallets for materials handling - Vocabulary (ISO 445:1996) |
| prEN 61643-12-2000 |
与低压配电系统连接的浪涌保护装置 第12部分：选择和应用原则 |
Draft IEC 61643-12: Surge protective devices connected to low-voltage power distribution systems - Part 12: Selection and application principles |
| prEN 45504-1994 |
采购指南 锅炉辅助设备 除尘 |
Guide for procurement - Boiler auxiliaries - Reduction of a dust emission |
| EN 1885-1998 |
羽毛和绒毛 术语和定义 |
Feather and down - Terms and definitions |
| EN 61069-1-1993 |
工业过程测量和控制 系统评估用系统特性的评定 第1部分：一般考虑和方法学 |
Industrial-process measurement and control- Evaluation of system properties for the purpose of system assessment; Part 1: General considerations and methodology (IEC 61069-1:1991) |
| EN 60317-32/prA2-1997 |
特种绕组线规范 第32部分：温度指数155、玻璃丝绕包聚酯或聚酯酰亚胺浸渍裸或漆包扁铜线 修改prA2 |
Amendment to IEC 60317-32 |
| EN 29092-1992 |
纺织品 非织造布 定义 |
Textiles-Nonwovens-Definition |
| EN 61069-2-1994 |
工业过程测量和控制 系统评估用系统特性的评定 第2部分：评估方法学 |
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology (IEC 61069-2:1993) |
| EN ISO 4921-2001 |
针织品 基本概念 词汇 |
Knitting - Basic concepts - Vocabulary (ISO 4921:2000) |
| EN 61069-3-1996 |
工业过程测量和控制 系统评估用系统特性的评定 第3部分：系统功能性的评估 |
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 3: Assessment of system functionality (IEC 61069-3:1996) |
| EN 61298-1-1995 |
过程测量和控制装置 性能评定用一般方法和程序 第1部分：一般考虑 |
Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations (IEC 61298-1:1995) |
| EN 61069-4-1997 |
工业过程测量和控制 系统评估用系统特性的评定 第4部分：系统性能评估 |
Industrial process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 4: Assessment of system performance (IEC 61069-4:1997) |
| EN 13402-1-2001 |
衣服尺码表示方法 第1部分：术语、定义和测体程序（ISO 3635:1981，修改） |
Size designation of clothes - Part 1: Terms, definitions and body measurement procedure (ISO 3635:1981, modified) |
| EN 300-1997 |
定向纤维板(OSB) 定义、分类和规范 |
Oriented Strand Boards (OSB) - Definitions, classification and specifications |
| EN 61069-5-1995 |
工业过程测量和控制 系统评估用系统特性的评定 第5部分：系统可靠性评估 |
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability (IEC 61069-5:1994) |
| EN 12325-3-1999 |
灌溉技术 中心枢轴和横移系统 第3部分：术语和分类 |
Irrigation techniques - Centre pivot and moving lateral systems - Part 3: Terminology and classification |
| EN 313-2-1999 |
胶合板 分类和术语 第2部分：术语 |
Plywood - Classification and terminology - Part 2: Terminology |
| EN 61069-6-1998 |
工业过程测量和控制 系统评估用系统特性的评定 第6部分：系统可操作性能评估 |
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 6: Assessment of system operability (IEC 61069-6:1998) |
| EN 12944-3-2001 |
肥料和石灰材料 词汇 第3部分：与石灰材料相关的术语 |
Fertilizers and liming materials - Vocabulary - Part 3: Terms relating to liming materials |
| EN 21942-4-1993 |
牙科词汇 第4部分：牙科设备 |
Dental vocabulary; part 4: dental equipment (ISO 1942-4:1989) |
| prEN 60769-4-1-1997 |
|
|
| prEN 61193-5-1999 |
软焊接 第5部分：印制电路板组件缺陷的登记和分析 |
IEC 61193-5: Soft soldering - Part 5: Registration and analysis of defects on printed board assemblies |
| EN ISO 1942-5-1994 |
牙医词汇 第5部分：与测试有关的术语 |
Dental vocabulary - Part 5: Terms associated with testing (ISO 1942-5:1989) |
| EN 60603-7/prA1-1998 |
用于印制电路板的3MHz以下频率连接器? 第7部分：有质量评定的具通用插合特 性包括固定和自由连接器的8位连 |
Amendment to IEC 60603-7: Detail specification for 8 way connectors, with assessed quality, including fixed and free connectors with common mating features - Test methods and related requirements for use at frequencies up to 100 MHz |
| EN ISO 4135-2001 |
麻醉剂与呼吸设备 词汇 |
Anaesthetic and respiratory equipment - Vocabulary (ISO 4135:2001) |
| EN ISO 7998-1996 |
光学和光学仪器 |
Optics and optical instruments - Spectacle frames - Vocabulary and lists of equivalent terms (ISO 7998:1984) |
| EN ISO 8320-2-2001 |
接触透镜与接触透镜护理产品 词汇 第2部分：接触透镜护理产品 |
Contact lenses and contact lens care products - Vocabulary - Part 2: Contact lens care products (ISO 8320-2:2001) |
| EN 301029-7 V 1.1.2-1998 |
宽带综合业务数字网（B-ISDN） 7号信令系统 B-ISDN用户部分（B-ISUP） 第7部分：ATM末端系统地址 |
Broadband Integrated Services Digital Network (B-ISDN) - Signalling System No. 7 - B-ISDN User Part (B-ISUP) - Part 7: ATM end system address (ITU-T Q.2726.1:1996) |
| EN 300175-7 V 1.4.1-1998 |
数字增强型无绳通信（DECT） 公共接口（CI） 第7部分：安全特性 |
Digital Enhanced Cordless Telecommunications (DECT) - Common Interface (CI) - Part 7: Security features |
| EN 300195-2 V 1.3.3-1998 |
综合业务数字网（ISDN） 补充业务相互作用 1号数字用户信令系统（DSS1）协议 第2部分：协议实现一致性陈 |
Integrated Services Digital Network (ISDN) - Supplementary service interactions - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification |
| prEN 398-1992 |
摩托车和机动自行车驾驶者和乘客用防护头盔 |
Protective helmets for drivers and passengers of motor cycles and mopeds |
| prEN 50093-1991 |
电压降、短中断、电压变化的基本抗扰标准 |
Basic immunity standard for voltage dips, short interruptions and voltage variations |
| EN ISO 3952-3-1994 |
运动图 图形符号 第3部分 |
Kinematic diagrams - Graphical symbols - Part 3 (ISO 3952-3:1979) |
| EN 60617-8-1996 |
简图用图形符号 第８部分：测量仪器、灯和信号装置 |
Graphical symbols for diagrams - Part 8: Measuring instruments, lamps and signalling devices (IEC 60617-8:1996) |
| EN ISO 3952-4-1997 |
运动图 图形符号 第4部分 |
Kinematic diagrams - Graphic symbols - Part 4 (ISO 3952-4:1984) |
| EN ISO 5261-1999 |
技术制图 金属棒的简单表示和外形剖面 |
Technical drawings - Simplified representation of bars and profile sections (ISO 5261:1995) |
| EN 12809-2001+AC-2003 |
燃烧固体燃料的民用独立式锅炉 标称热输出最大可达50kW 要求和试验方法 |
Residential independent boilers fired by solid fuel - Nominal heat output up to 50 k W - Requirements and test methods |
| EN 60617-11-1996 |
简图用图形符号 第１１部分：建筑与地形的安装平面图和简图 |
Graphical symbols for diagrams - Part 11: Architectural and topographical installation plans and diagrams (IEC 60617-11:1996) |
| EN 60617-2-1996 |
简图用图形符号 第２部分：符号要素、限定符号和常用的其它符号 |
Graphical symbols for diagrams - Part 2: Symbol elements, qualifying symbols and other symbols having general application (IEC 60617-2:1996) |
| EN 60617-12-1998 |
简图用图形符号 第１２部分：二进制逻辑元件 |
Graphical symbols for diagrams - Part 12: Binary logic elements (IEC 60617-12:1997) |
| EN 13318-2000 |
样板材料和地面样板 定义 |
Screed material and floor screeds - Definitions |
| EN 60617-3-1996 |
简图用图形符号 第３部分：导体和连接器件 |
Graphical symbols for diagrams - Part 3: Conductors and connecting devices (IEC 60617-3:1996) |
| EN ISO 11114-2-2000 |
可运输气瓶 气瓶和瓶阀材料与盛装气体的相容性 第2部分：非金属材料 |
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2000) |
| EN 60617-13-1993 |
图表用图形符号 第13部分：模拟元件 |
Graphical symbols for diagrams; Part 13: Analogue elements (IEC 60617-13:1993) |
| EN 60617-4-1996 |
图表用图形符号 第４部分：基础无源组件 |
Graphical symbols for diagrams - Part 4: Basic passive components (IEC 60617-4:1996) |
| EN ISO 11114-3-1997 |
可运输气瓶 气瓶和瓶阀材料与盛装气体的相容性 第3部分：氧环境中自燃试验 |
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test in oxygen atmosphere (ISO 11114-3:1997) |
| EN 61082-2-1994 |
电工技术用文件的编制 第2部分：功能图 |
Preparation of documents used in electrotechnology; Part 2: function-oriented diagrams (IEC 61082-2:1993) |
| EN 60617-5-1996 |
简图用图形符号 第５部分：半导体和电子管 |
Graphical symbols for diagrams - Part 5: Semiconductors and electron tubes (IEC 60617-5:1996) |
| EN ISO 11120-1999 |
气瓶 150L至3000L水容量的可重复充装无缝纲管气瓶设计、结构和试验 |
Gas cylinders - Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l - Design, construction and testing (ISO 11120:1999) |
| EN 61082-3-1994 |
电工技术用文件的编制 第3部分：接线图、接线表和接线单 |
Preparation of documents used in electrotechnology; Part 3: connection diagrams, tables and lists (IEC 61082-3:1993) |
| EN 12763-2000 |
建筑物排水系统的纤维胶合管及附件 交货尺寸和技术术语 |
Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery |
| EN 60617-6-1996 |
简图用图形符号 第6部分：电能的发生和转换 |
Graphical symbols for diagrams - Part 6: Production and conversion of electrical energy (IEC 60617-6:1996) |
| EN 60617-9-1996 |
制图用图形符号 第9部分：电信：交换和外围设备 |
Graphical symbols for diagrams - Part 9: Telecommunications: Switching and peripheral equipment (IEC 60617-9:1996) |
| EN 712-1993 |
热塑管道系统 压力管和配件间承受机械接合件的端部负载 在恒定径向力下抗拔出性能的试验方法 |
Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull-out under constant longitudinal force |
| EN 60617-7-1996 |
简图用图形符号 第７部分：开关设备、控制设备和保护装置 |
Graphical symbols for diagrams - Part 7: Switchgear, control gear and protective devices (IEC 60617-7:1996) |
| EN 713-1993 |
塑料管道系统 配件和聚烯烃压力管间的机械接合件 弯曲时组件内部压力密封性的试验方法 |
Plastic piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending |
| EN 60617-10-1996 |
简图用图形符号 第10部分：电信 传输 |
Graphical symbols for diagrams - Part 10: Telecommunications: Transmission (IEC 60617-10:1996) |
| prENV 41203-1988 |
信息系统互连 可以是teletex（一种使用互连的计算机终端的数据处理和通信）终端的两个系统间的teletex文件 |
Information systems interconnection; exchange of teletex documents between two systems, which may be teletex terminals |
| EN 714-1994 |
热塑管道系统 压力管和模塑配件间的无端部负载的弹性密封环型接合件 在无轴向推力时内部流体静力学压力下 |
Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings - Test method for leaktightness under internal hydrostatic pressure without end thrust |
| EN 61666-1997 |
工业系统、设施、设备和工业产品 系统中端子的标识 |
Industrial systems, installations and equipment and industrial products - Identification of terminals within a system (IEC 61666:1997) |
| prEN 50226-1995 |
可充电电池或蓄电池的电磁兼容性 |
Electromagnetic compatibility of rechargeable cells or batteries |
| EN 715-1994 |
热塑管道系统 小直径压力管和配件间端部负荷的接合件 在包含轴向推力的内部水压下密封性的试验方法 |
Thermoplastics piping systems - End-load bearing joints between small diameter pressure pipes and fittings-Test method for leaktightness under internal water pressure, including end thrust |
| prEN 122240-1993 |
分规范 射频同轴连接器 1.6/5.6系列 |
Sectional specification; Radio frequency coaxial connectors-serie 1,6/5,6 (CECC 22240:1993) |
| EN 911-1995 |
塑料管道系统 热塑塑料压力管道用的弹性密封环型接头和机械接头 外部液压条件下防漏密封试验方法 |
Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure |
| prEN 50097-1991 |
医用电气设备 第1部分：安全的通用要求 并列标准：电磁兼容性 |
Medical electrical equipment; part 1: general requirements for safety; collateral standard: electromagnetic compatibility |
| prEN 50190-1994 |
通过D2B条件存取和菜单控制 |
Conditional access and menu control via D2B |
| prEN ISP 11186-1-1996 |
信息技术 国际标准化轮廓FVT3nn 虚拟终端基本类 属性分配类型定义的登记册 第1部分：FVT321 字型分配 |
Information technology - International Standardized Profiles FVT3nn - Virtual terminal basic class - Register of attribute assignment type definitions - Part 1: FVT321 - Font assignment type No. 1 (ISO/IEC ISP 11186-1:1996) |
| EN 61000-4-10/prAB-2000 |
电磁兼容性（ＥＭＣ） 第4部分：试验和测量方法 第10节：阻尼振荡磁场抗扰度试验 基础(EMC)出版物 修改 |
Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic conditions |
| prEN ISP 12059-13-1996 |
信息技术 国际标准化轮廓 管理功能用的公共信息 第13部分：概要 |
Information technology - International Standardized Profiles - OSI Management - Common information for management functions - Part 13: Summarization (ISO/IEC ISP 12059-13:1996) |
| prEN 60793-1-45-2001 |
光学纤维 第１－４５部分：测量方法和试验规程 模场直径 草案 |
IEC 60793-1-45, Ed. 1: Optical fibres - Part 1-45: Measurement methods and test procedures; Mode field diameter |
| prEN 3125-2001 |
航空航天系列 AL-C42201 T6铝合金 熔模铸件 a ≤20 mm |
Aerospace series - Aluminium alloy AL-C42201 T6 - Investment casting a 20 mm |
| prEN 3757-1998 |
航空航天系列 MoS2润滑耐热钢、自锁浮动自对中双耳系紧螺栓螺母 等级： 900 MPa(环境温度)/315℃? |
Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, two lug, in heat resisting steel, MoS lubricated - Classification: 900 MPa (at ambient temperature)/315℃ |
| prEN 178001-1992 |
空白详细规范：光纤和光缆末端 环境类I |
Blank detail specification: termini for optical fibres and cables; environmental category I |
| prEN 2823-1998 |
航空航天系列 纤维增强塑料 暴露于潮湿环境对物理和机械性能影响的测定 |
Aerospace series - Fibre reinforced plastics - Determination of the effect of exposure to humid atmosphere on physical and mechanical characteristics |
| EN 1092-1-2001 |
法兰及其连接 按PN标注的管、阀门、配件及其附件用圆形法兰 第1部分：钢法兰 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges |
| EN 1092-2-1997 |
法兰及其连接 按PN标注的管、阀门、配件及其附件用圆形法兰 第2部分：铸铁法兰 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
| EN ISO 81714-1-1999 |
产品技术文件用图形符号的设计 第1部分：基本规则 |
Design of graphical symbols for use in the technical documentation of products - Part 1: Basic rules (ISO 81714-1:1999) |
| EN 1448-1996 |
塑料管道系统 玻璃增强热固塑料(GRP)组件 带弹性密封件的刚性锁紧插承接合的设计查验试验方法 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals |
| EN ISO 5456-2-1999 |
技术制图 投影法 第2部分：正交表示法 |
Technical drawings - Projection methods - Part 2: Orthographic representations (ISO 5456-2:1996) |
| HD 245.3 S3-2001 |
电气技术用文字符号 第3部分：对数的量和单位 |
Letter symbols to be used in electrical technology - Part 3: Logarithmic quantities and units (IEC 60027-3:1989 + A1:2000) |
| EN ISO 128-20-2001 |
技术制图 画法的一般原则 第20部分：图线 |
Technical drawings - General principles of presentation - Part 20: Basic conventions for lines (ISO 128-20:1996) |
| HD 245.4 S1-1987 |
电气技术用文字符号 第4部分：旋转电机用量的符号 |
Letter symbols to be used in electrical technology; Part 4: Symbols of quantities to be used for rotating electrical machines |
| EN ISO 5456-3-1999 |
技术制图 投影法 第3部分：三向投影表示法 |
Technical drawings - Projection methods - Part 3: Axonometric representations (ISO 5456-3:1996) |
| EN ISO 128-21-2001 |
技术制图 画法的一般原则 第21部分：计算机辅助设计(CAD)系统用图线的表示 |
Technical drawings - General principles of presentation - Part 21: Preparation of lines by CAD systems (ISO 128-21:1997) |
| EN 60446-1999 |
人机界面、标志和标识的基本原则和安全原则 用颜色或数字来标识导体 |
Basic and safety principles for man-machine interface, marking and identification - Identification of conductors by colours or numerals (IEC 60446:1999) |
| EN ISO 5456-4-2001 |
技术制图 投影法 第4部分：中央投影表示法 |
Technical drawings - Projection methods - Part 4: Central projection (ISO 5456-4:1996) |
| EN 61605-1997 |
电子和通信设备用固定电感器 标记代码 |
Fixed inductors for use in electronic and telecommunication equipment - Marking codes (IEC 61605:1996) |
| EN ISO 1660-1995 |
技术制图 外形尺寸公差和注法 |
Technical drawings - Dimensioning and tolerancing of profiles (ISO 1660:1987) |
| EN ISO 5457-1999 |
技术产品文件 图纸的尺寸和布局 |
Technical product documentation - Sizes and layout of drawing sheets (ISO 5457:1999) |
| EN ISO 14726-1-2001 |
船舶与海上技术 管系内含物识别颜色 第1部分：主色和介质 |
Ships and marine technology - Identification colours for the content of piping systems - Part 1: Main colours and media (ISO 14726-1:1999) |
| EN ISO 3098-0-1997 |
技术产品文件 文字 第0部分：一般要求 |
Technical product documentation - Lettering - Part 0: General requirements (ISO 3098-0:1997) |
| EN ISO 6428-1999 |
技术制图 微缩复制的要求 |
Technical drawings - Requirements for microcopying (ISO 6428:1982) |
| HD 27 S1-1974 |
软电缆和软线芯体的颜色 |
Colours of the cores of flexible cables and cords |
| EN ISO 3098-2-2000 |
技术产品文件 文字 第2部分：拉丁字母表、数字和符号 |
Technical product documentation - Lettering - Part 2: Latin alphabet, numeral and marks (ISO 3098-2:2000) |
| EN 81714-2-1998 |
产品技术文件用图形符号的设计 第2部分：用于计算机敏感性、包括用于参考书图书馆的图形符号规范和它们交 |
Design of graphical symbols for use in the technical documentation of products - Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange (IEC 81714-2-1998) |
| EN ISO 6433-1994 |
技术制图 零件标引 |
Technical drawings - Item references (ISO 6433:1981) |
| EN ISO 3098-3-2000 |
技术产品文件 文字 第3部分：希腊字母表 |
Technical product documentation - Lettering - Part 3: Greek alphabet (ISO 3098-3:2000) |
| EN 81714-3-2001 |
产品技术文件用图形符号的设计 第3部分：连接节点、网络及其编码的分类 |
Design of graphical symbols for use in the technical documentation of products - Part 3: Classification of connect nodes, networks and their encoding (IEC 81714-3:1998) |
| EN ISO 7083-1994 |
技术制图 几何形位公差的符号 比例和尺寸 |
Technical drawings - Symbols for geometrical tolerancing - Proportions and dimensions (ISO 7083:1983) |
| prEN ISO/IEC 7811-2-2001 |
识别卡 记录技术 第2部分：磁条 低矫顽力 |
Identification cards - Recording technique - Part 2: Magnetic stripe; Low coercivity (ISO/IEC 7811-2:2001) |
| EN ISO 3098-4-2000 |
技术产品文件 文字 第4部分：拉丁字母表用的区分标记和特殊标记 |
Technical product documentation - Lettering - Part 4: Diacritical and particular marks for the Latin alphabet (ISO 3098-4:2000) |
| EN ISO 9241-16-1999 |
办公用视觉显示终端(VDTs)的人类工效学要求 第16部分：直接处理对话 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 16: Direct manipulation dialogues (ISO 9241-16:1999) |
| prEN 50275-3-1997 |
电动车辆的充电 第3部分：A.C.充电站 |
Conductive charging for electric vehicles - Part 3: A.C. charging station |
| EN ISO 3098-6-2000 |
技术产品文件 文字 第6部分：西里尔字母表 |
Technical product documentation - Lettering - Part 6: Cyrillic alphabet (ISO 3098-6:2000) |
| prEN 12927-4-2001 |
索道客运的安全要求 钢索 第4部分：端部接头 |
Safety requirements for passenger transportation by rope - Ropes - Part 4: End fixing |
| EN ISO 9241-17-1998 |
办公用视觉显示终端(VDTs)的人类工效学要求 第17部分：填表对话 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 17: Form filling dialogues (ISO 9241-17:1998) |
| EN ISO 5455-1994 |
技术制图 比例尺 |
Technical drawings - Scales (ISO 5455:1979) |
| prEN 2346-004-2001 |
航空航天系列 耐火电缆 工作温度65 ℃ and 260 ℃之间 第004部分：DN 系列 UV单芯激光印刷和多芯组装 |
Aerospace series - Cables, electrical, fire-resistant; Operating temperatures between -65℃ and 260℃ - Teil 004: DN family, single UV laser printable and multicore assembly; Light weight; Product standard |
| EN ISO 10075-2-2000 |
与心理负荷有关的人类工效学原则 第2部分：设计原则 |
Ergonomic principles related to mental workload - Part 2: Design principles (ISO 10075-2:1996) |
| EN ISO 5456-1-1999 |
技术制图 投影法 第1部分：概要 |
Technical drawings - Projection methods - Part 1: Synopsis (ISO 5456-1:1996) |
| EN ISO 11064-1-2000 |
控制中心的人类工效学设计 第1部分：控制中心设计的原则 |
Ergonomic design of control centres - Part 1: Principles for the design of control centres (ISO 11064-1:2000) |
| EN ISO 11064-2-2000 |
控制中心的人类工效学设计 第2部分：控制序列排列的原则 |
Ergonomic design of control centres - Part 2: Principles for the arrangement of control suite (ISO 11064-2:2000) |
| prEN 61097-3-1993 |
全球海上遇险和安全系统(GMDSS) 第3部分：数字选择呼叫(DSC)设备 操作和性能要求、试验方法和要求的试验 |
Draft IEC 61097-3, part 3: global maritime distress and safety system (GMDSS); digital selective calling (DSC) equipment; operational and performance requirements; methods of testing and required testing results |
| prEN 2038-1977 |
航空航天系列 拉制六角型钢 尺寸 容差h9 |
Hexagonal steel bars, drawn; dimensions; tolerance h 9; aerospace series |
| prEN 4495-1999 |
航空航天系列 铝涂层阳极氧化钛合金紧公差标准体短螺纹 标准六角头螺栓 等级：1100 MPa (环境温度下)/31 |
Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃ |
| EN ISO 11064-3-1999 |
控制中心的人类工效学设计 第3部分：控制室布置 |
Ergonomic design of control centres - Part 3: Control room layout (ISO 11064-3:1999) |
| prEN 2159-1977 |
航空航天系列 调质的钢FE-PM44 棒材D150毫米 |
Aerospace series; steel FE-PM 44, hardened and tempered; bars D 150 mm |
| prEN 4057-304-2001 |
航空航天系列 铠装用绳索系材 试验方法 第304部分：最高工作温度下环形抗拉强度／注：与EN 4057-100结合 |
Aerospace series - Cable ties for harnesses; Test methods - Part 304: Loop tensile strength at maximum working temperature / Note: Applies in conjunction with EN 4057-100 |
| ENV ISO 11079-1998 |
冷环境评价 必备隔热服装(IREQ)的测定 |
Evaluation of cold environments - Determination of required clothing insulation (IREQ) (ISO/TR 11079:1993) |
| prEN 2417-1980 |
航空航天系列 溶液处理和淀积处理的耐热钢 FE-PA 93-HT 板材 a 3 mm |
Aerospace series; heat resisting steel FE-PA 93-HT, solution treated and precipitation treated; plates a ≥ 3 mm |
| EN ISO 13406-1-1999 |
平板视觉显示工作的人类工效学要求 第1部分：概述 |
Ergonomic requirements for work with visual display based on flat panels - Part 1: Introduction (ISO 13406-1:1999) |
| prEN 3155-004-2000 |
航空航天系列 用在连接部件的电接点 第004部分：A型卷边T级插塞电接点 产品标准 |
Aerospace series - Electrical contacts used in elements of connection - Part 004: Contacts, electrical, male, type A, crimp, class T - Product standard |
| EN ISO 13406-2-2001 |
平板视觉显示工作的人类工效学要求 第2部分：平板显示的人类工效学要求 |
Ergonomic requirements for work with visual displays based on flat panels - Part 2: Ergonomic requirements for flat panel displays (ISO 13406-2:2001) |
| EN ISO 13407-1999 |
以人为中心的交互系统设计过程 |
Human-centred design processes for interactive systems (ISO 13407:1999) |
| HD 384.4.482 S1-1997 |
建筑物的电气设施 第4部分：安全保护 第48章：视为外部影响作用的保护措施的选择 第482节：有特殊风险或 |
Electrical installations of buildings - Part 4: Protection for safety - Chapter 48: Choice of protective measures as a function of external influences - Section 482: Protection against fire where particular risks or danger exist |
| EN 1317-2-1998 |
道路防护系统 第2部分：安全屏障的性能等级、碰撞试验、验收标准和试验方法 |
Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers |
| EN 10246-1-1996 |
钢管的无损检测 第1部分：证明液压密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验 |
Non destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness |
| EN 560-1994 |
气焊设备 焊接、切割和同类处理用设备的软管连接 |
Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes |
| EN 1317-3-2000 |
道路防护系统 第3部分：碰撞防护垫的性能等级、碰撞试验、验收标准和试验方法 |
Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions |
| EN 10246-2-2000 |
钢管的无损检测 第2部分：证明液压密封性用无缝和焊接奥氏体和奥氏体铁素体钢管（埋弧焊除外） 的自动涡流 |
Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness |
| ENV 1317-4-2001 |
道路防护系统 第4部分：安全屏障的终端和过度性能等级、碰撞试验、验收标准和试验方法 |
Road restraint systems - Part 4: Performance classes, impact test acceptance criteria and test methods for terminals and transitions of safety barriers |
| EN 854-1996 |
橡胶软管和软管配件 纺织增强液压型 规范 |
Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
| EN 2-1992 |
火灾的分类 |
Classification of fires |
| EN 10246-3-1999 |
钢管的无损检测 第3部分：缺陷探测用无缝和焊接钢管(埋弧焊除外)的自动涡流检验 |
Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
| EN 855-1996 |
塑料软管和软管配件 热塑料织物增强液压型 规范 |
Plastics hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification |
| EN ISO 13702-1999 |
石油和天然气工业 对海上开发安装中着火和爆炸的控制和减弱要求和指南 |
Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines (ISO 13702:1999) |
| EN 10246-4-1999 |
钢管的无损检测 第4部分：横向缺陷探测用无缝或焊接铁磁钢管的（埋弧焊除外）自动全周界磁传感器检验漏磁 |
Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections |
| EN 1113-1997 |
卫生水龙头用淋浴设备软管（PN10） |
Showers hoses for (PN 10) sanitary tapware |
| prEN 2060-1977 |
航空航天系列 Bowler hat型材 带唇状凸缘的铝合金褶皱截面 尺寸 |
Bowler hat section; aluminium alloy folded profiles; dimensions; aerospace series |
| EN 10246-5-1999 |
钢管的无损检测 第5部分：径向缺陷探测用无缝或焊接铁磁钢管的（埋弧焊除外）自动全周界磁传感器检验漏磁 |
Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for the detection of longitudinal imperfections |
| EN 1256-1996 |
气焊设备 焊接切割及类似加工设备的软管附件规范 |
Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes |
| prEN 2383-1998 |
航空航天系列 AL-P2214-T4铝合金 a 100 mm手工和模压锻件 |
Aerospace series - Aluminium alloy AL-P2214-T4 - Hand and die forgings a 100 mm |
| EN 10246-6-1999 |
钢管的无损检测 第6部分：横向缺陷探测用无缝钢管的自动全周界超声检验 |
Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections |
| prEN 3646-010-2001 |
航空航天系列 连续操作温度175 ℃或 200℃、圆形卡口式联结电连接器 第010部分：带保护层插头 产品标准 |
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175℃ or 200℃ continuous - Part 010: Protective cover for plug; Product standard |
| EN 1327-1996 |
气焊设备 焊接和相关工艺用热塑软管 |
Gas welding equipment - Thermoplastic hoses for welding and allied processes |
| EN 10246-7-1996 |
钢管的无损检测 第7部分：纵向缺陷探测用的无缝和焊接铁磁钢管(埋弧焊除外)的自动周界超声检验 |
Non destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections |
| EN 1765-1997 |
油的吸放装置用橡胶软管组装件 组装件规范 |
Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
| EN 1360-1996 |
受测燃料配制用橡胶软管和软管部件 规范 |
Rubber hoses and hose assemblies for measured fuel dispensing - Specification |
| EN 12115-1999 |
液体或气体化学药品用的橡胶和热塑软管和软管组件 规范 |
Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
| EN 10246-8-1999 |
钢管的无损检测 第8部分：纵向缺陷探测用电焊钢管焊缝的自动超声检验 |
Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections |
| EN 1361-1997 |
飞行燃油处理用橡胶软管和软管组件 规范 |
Rubber hoses and hose assemblies for aviation fuel handling - Specification |
| EN 13482-2001 |
沥青用橡胶软管和软管组件 规范 |
Rubber hoses and hose assemblies for asphalt and bitumen - Specification |
| EN 10246-9-2000 |
钢管的无损检测 第9部分：探测用纵向和/或横向缺陷埋弧焊钢管焊缝的自动超声检验 |
Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections |
| EN 24641-1993 |
给水和排水用橡胶软管 规范 |
Rubber hoses for water and discharge; specification (ISO 4641:1991) |
| EN 1761-1999 |
燃料卡车送货用的橡胶软管和软管组件 规范 |
Rubber hoses and hose assemblies for fuel truck delivery - Specification |
| EN 10246-10-2000 |
钢管的无损检测 第10部分：钢管缺陷探测用的自动熔弧焊钢管焊缝的射线检验 |
Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections |
| EN 26801-1993 |
橡胶或塑料软管 容积膨胀的测定 |
Rubber or plastics hoses-Determination of volumetric expansion (ISO 6801:1983) |
| EN 1762-1997 |
气压为25bar(2.5MPa)及以下的液化石油气LPG(液相或气相)及天然气用橡胶软管和软管组件 规范 |
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification |
| EN 26802-1993 |
钢丝增强的橡胶和塑料软管及软管件 弯抗冲击试验 |
Rubber and plastics hoses and hose assemblies, wire reinforced- Hydraulic impulse test with flexing (ISO 6802:1991) |
| prEN 2719-2001 |
航空航天系列 聚碳酸酯板 技术规范 |
Aerospace series - Polycarbonate sheet - Technical specification |
| EN 27326-1993 |
橡胶和塑料软管 静态条件下耐臭氧性的评定 |
Rubber and plastics hoses-Assessment of ozone resistance under static conditions (ISO 7326:1991) |
| CR 13568-1999 |
地理信息 数据描述 概念上的图解语言 |
Geographic information - Data description - Conceptual schema language |
| prEN 4488-2001 |
航空航天系列 非金属材料 厌氧可聚化合物 螺纹锁具 抗扭强度2 Nm |
Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds; Threadlocking; Torque strength 2 Nm |
| EN 28029-1993 |
塑料软管 通用型可折叠织物增强输水软管 规范 |
Plastics hose-General purpose collapsible water hose, textile reinforced-Specification (ISO 8029:1985) |
| CR 13908-2000 |
后勤绩效考核 需求和测量方法 |
Logistics performance measures - Requirements and measuring methods |
| prEN 4503-2001 |
航空航天系列 非金属材料 纺织品 试验方法 水萃取的水溶性氯化物和硫酸盐的测定 |
Aerospace series - Non-metallic materials; Textiles; Test method - Determination of water soluble chloride and sulfate of aqueous extracts |
| EN 28033-1993 |
橡胶和塑料软管 部件间粘合强度的测定 |
Rubber and plastic hoses-Determination of adhesion between components (ISO 8033:1991) |
| EN 60601-2-37-2001 |
医疗电气设备 第2－37部分：超声医疗诊断和监护设备安全的特殊要求 |
Medical electrical equipment - Part 2-37: Particular requirements for the safety of ultrasonic medical diagnostic and monitoring equipment (IEC 60601-2-37:2001) |
| prEN 4385-2001 |
航空航天系列 非金属材料 标准化的一般组织 标准类型间的链接 |
Aerospace series - Non-metallic materials - General organisation of standardisation; Links between types of standards |
| EN ISO 1307-1995 |
一般工业用橡胶和塑料软管 孔径和公差及长度公差 |
Rubber and plastics hoses for general-purpose industrial applications - Bore diameters and tolerances, and tolerances on length (ISO 1307:1992) |
| CR 13903-2000 |
用于治疗一氧化氮中毒的设备的通用指南 |
General guidance on the equipment used for inhaled nitric oxide therapy |
| EN ISO 1401-1999 |
农业喷雾用橡胶软管 |
Rubber hoses for agricultural spraying (ISO 1401:1999) |
| prEN 4396-1999 |
航空航天系列 FE-PA92HT(A286)制镀银耐热钢、自锁轴螺母 |
Aerospace series - Shaft-nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated |
| prEN 14456-2002 |
人类生活用水处理用产品 骨炭 |
Products used for treatment water intended for human consumption - Bone charcoal |
| EN 930/prA1-2001 |
鞋、皮革和仿皮革产品制造机械 固定、刷洗、上光和整理机械 安全要求 修改A1 |
Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements; Amendment A1 |
| prEN 2345-1982 |
航空航天系列 铝和铝合金铆钉 技术规范 |
Aerospace series; aluminium and aluminium alloy rivets; technical specification |
| prEN 4360-2000 |
航空航天系列 阳极氧化或铬酸盐处理铝合金 7050、制１００°带圆顶短头实心铆钉 米制 |
Aerospace series - Rivets, solid, 100?countersunk reduced head with dome, in aluminium alloy 7050, anodized or chromated - Metric series |
| EN ISO 1402-1996 |
橡胶和塑料软管和软管组件 液压试验 |
Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:1994) |
| EN ISO 5458-1998 |
产品几何技术规范(GPS) 几何公差 位置公差标注 |
Geometrical product specifications (GPS) - Geometrical tolerancing - Positional tolerancing (ISO 5458:1998) |
| prEN 4303-1999 |
航空航天系列 钝化耐腐蚀钢(0,25 mm 壁厚)制埋头的拉紧螺钉用套筒 |
Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness) |
| prEN 14436-2002 |
铜及铜合金 电解镀锡带 |
Copper and copper alloys - Electrolytically tinned strip |
| EN ISO 1403-1997 |
一般用途的输水橡胶软管 规范 |
Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:1995) |
| EN ISO 5845-1-1999 |
技术制图 紧固件组合的简单表示法 第1部分：一般原则 |
Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles (ISO 5845-1:1995) |
| EN 61508-5-2001 |
电气/电子/可编程电子安全相关系统的功能安全 第5部分：确定安全整体水平方法的实例 |
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (IEC 61508-5:1998 + Corrigendum 1999) / Note: Endorsement notice |
| EN ISO 1746-2000 |
橡胶或塑料软管和管件 弯曲试验 |
Rubber or plastics hoses and tubing - Bending tests (ISO 1746:1998, including technical corrigendum 1:1999) |
| EN ISO 6410-1-1996 |
技术制图 螺钉和螺纹部件 第1部分：通用规范 |
Technical drawings - Screw threads and threaded parts - Part 1: General conventions (ISO 6410-1:1993) |
| EN ISO 5183-2-2001 |
电阻点焊设备 外锥度1:10电极接头 第2部分：端推力电极用平行柄接头 |
Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes (ISO 5183-2:2000) |
| EN 61300-3-24-2000 |
光纤互连器件和无源元件 基本试验和测量程序 第3-24部分：检查和测量 偏振保持纤维的光学连接器键入准确 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-24: Examinations and measurements - Keying accuracy of optical connectors for polarization maintaining fibre (IEC 61300-3-24:1999) |
| EN ISO 6410-2-1996 |
技术制图 螺钉和螺纹部件 第2部分：螺蚊嵌镶件 |
Technical drawings - Screw threads and threaded parts - Part 2: Screw thread inserts (ISO 6410-2:1993) |
| EN ISO 5828-2001 |
电阻焊设备 连接水冷接头的二次连接电缆 尺寸及特性 |
Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics (ISO 5828:2001) |
| EN 61300-3-25-1997 |
光纤互连器件和无源元件 基本试验和测量程序 第3-25部分：检查和测量 套管和装有纤维套管的同心度 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of the ferrules and ferrules with fibre installed (IEC 61300-3-25:1997) |
| EN ISO 7284-1996 |
电阻焊设备 汽车工业用多点点焊的两个单独副线圈的变压器的特殊技术条件 |
Resistance welding equipment - Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding as used in the automobile industry (ISO 7284:1993) |
| EN 61298-2-1995 |
过程测量和控制装置 性能评定用一般方法和程序 第2部分：参考条件下的试验 |
Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions (IEC 61298-2:1995) |
| EN ISO 8205-3-1996 |
电阻焊接水冷次级线圈连接电缆 第3部分：试验要求 |
Water-cooled secondary connection cables for resistance welding - Part 3: Test requirements (ISO 8205-3:1993) |
| EN 2851-1992 |
航空航天系列 除发动机外的零部件和组件的标志 图纸上标记 |
Aerospace series; Marking of parts and assemblies other than engines; Indications on drawings |
| EN 61298-3-1998 |
过程测量和控制装置 性能评定用一般方法和程序 第3部分：影响量作用的试验 |
Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities (IEC 61298-3:1998) |
| EN ISO 9312-1994 |
电阻焊设备 电极挡块的绝缘柱 |
Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:1990) |
| EN ISO 2162-1-1996 |
技术产品文件 弹簧 第1部分：简化表示法 |
Technical product documentation - Springs - Part 1: Simplified representation (ISO 2162-1:1993) |
| EN 61298-4-1995 |
过程测量和控制装置 性能评定用一般方法和程序 第4部分：评定报告内容 |
Process measurement and control devices - General methods and procedures for evaluating performance - Part 4: Evaluation report content (IEC 61298-4:1995) |
| EN ISO 14114-1999 |
气焊设备 焊接、切割及相关工艺用的乙炔汇流系统 一般要求 |
Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO 14114:1999) |
| EN ISO 2162-2-1996 |
技术产品文件 弹簧 第2部分：圆柱螺旋形压力弹簧数据的表示 |
Technical product documentation - Springs - Part 2: Presentation of data for cylindrical helical compression springs (ISO 2162-2:1993) |
| EN 61508-1-2001 |
电气/电子/可编程电子安全相关系统的功能安全 第1部分：一般要求 |
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (IEC 61508-1:1998 + Corrigendum 1999) / Note: Endorsement notice |
| EN ISO 14744-1-2000 |
焊接 电子束焊接机的验收检验 第1部分：原理和验收条件 |
Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2000) |
| EN 61508-2-2001 |
电气/电子/可编程电子安全相关系统的功能安全 第2部分：电气/电子/可编程电子安全相关系统的要求 |
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (IEC 61508-2:2000) / Note: Endorsement notice |
| EN ISO 14744-2-2000 |
焊接 电子束焊接机的验收检验 第2部分：加速电压特性的测量 |
Welding - Acceptance inspection of electron beam welding machines - Part 2: Measurement of accelerating voltage characteristics (ISO 14744-2:2000) |
| EN ISO 2203-1997 |
技术制图 齿轮的习惯画法 |
Technical drawings - Conventional representation of gears (ISO 2203:1973) |
| EN ISO 14744-3-2000 |
焊接 电子束焊接机的验收检验 第3部分：电子束电流特性的测量 |
Welding - Acceptance inspection of electron beam welding machines - Part 3: Measurement of beam current characteristics (ISO 14744-3:2000) |
| CR 296-1989 |
工作场所健康和安全领域标准化项目可行性研究 |
Feasibility study of a standardization programme in the area of health and safety at the workplace |
| EN 61508-3-2001 |
电气/电子/可编程电子安全相关系统的功能安全 第3部分：软件要求 |
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (IEC 61508-3:1998 + Corrigendum 1999) / Note: Endorsement notice |
| EN ISO 14744-4-2000 |
焊接 电子束焊接机的验收检验 第4部分：焊接速度的测量 |
Welding - Acceptance inspection of electron beam welding machines - Part 4: Measurement of welding speed (ISO 14744-4:2000) |
| prEN 2010-1975 |
航空航天系列 飞行器结构轴承 用镀镉和钝化轴承钢制造的刚性单列扭力管球轴承 尺寸和荷载 |
Airframe bearings; rigid single row torque tube ball bearings in cadmium plated and passivated bearing steel; dimensions and loads; aerospace series |
| EN 61508-4-2001 |
电气/电子/可编程电子安全相关系统的功能安全 第4部分：定义和缩略语 |
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (IEC 61508-4:1998 + Corrigendum 1999) / Note: Endorsement notice |
| prEN 3646-002-2001 |
航空航天系列 连续操作温度175 ℃或 200℃、圆形卡口式联结电连接器 第002部分：性能和连接安排规范 |
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175℃ or 200℃ continuous - Part 002: Specification of performance and contact arrangements |
| prEN 3727-2001 |
航空航天系列 有法兰式定位盖的飞机机架用硬质滚动轴承 尺寸和负荷 |
Aerospace series - Bearings, airframe rolling rigid with flanged alignment housing - Dimensions and loads |
| prEN 2591-609-1999 |
航空航天系列 光电连接元件 试验方法 第609部分：光学元件? 电缆附件的效能 电缆循环可绕性 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 609: Optical elements - Effectiveness of cable attachment - Cable cyclic flexing |
| prEN 3716-002-1998 |
航空航天系列 数字数据传输用具有三线接口的单路连接器 第００２部分：使用条件和产品标准目录 |
Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 002: Conditions for use and list of product standards |
| prEN 2266-002-2000 |
航空航天系列 通用电缆 工作温度 55 ℃ 和 200 ℃ 之间 第002部分：总则 |
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 200℃ - Part 002: General |
| prEN 2853-1998 |
航空航天系列 带EN2083导体的电缆的电流额定值 |
Aerospace series - Current ratings for electrical cables with conductor EN 2083 |
| prEN 3745-406-1999 |
航空航天系列 航空用光缆和光纤 试验方法 第406部分：冷弯曲测试 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 406: Cold bend test |
| prEN 2349-409-2000 |
航空航天系列 继电器和接触器要求和试验程序 第409部分：耐臭氧腐蚀性 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 409: Ozone resistance |
| prEN 10138-4-2000 |
预应力钢材 第4部分：棒材 |
Prestressing steels - Part 4: Bars |
| EN ISO 14744-5-2000 |
焊接 电子束焊接机的验收检验 第5部分：偏转精度的测量 |
Welding - Acceptance inspection of electron beam welding machines - Part 5: Measurement of run-out accuracy (ISO 14744-5:2000) |
| EN ISO 14744-6-2000 |
焊接 电子束焊接机的验收检验 第6部分：焊点位置稳定性的测量 |
Welding - Acceptance inspection of electron beam welding machines - Part 6: Measurement of stability of spot position (ISO 14744-6:2000) |
| prEN ISO 14439-2000 |
建筑玻璃 镶玻璃的要求 玻璃块的使用 |
Glass in building - Glazing requirements - Use of glazing blocks (ISO/DIS 14439:2000) |
| EN 1321-1996 |
金属材料焊接的破坏试验 焊接的宏观和微观检验 |
Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds |
| CR 13259-1998 |
气焊设备 工业手册和机械 火焰加热及类似工艺用氧燃气吹风管 |
Gas welding equipment - Industrial manual and machine- Oxygen-fuel gases blowpipes for flame heating and allied processes |
| EN ISO 11127-4-1997 |
涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第4部分：通过玻璃载片试验评定硬度 |
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:1993) |
| EN 12373-3-1998 |
铝和铝合金 阳极氧化 第3部分：阳极氧化膜厚度的测定 分束显微镜无损测量 |
Aluminium and aluminium alloys - Anodizing - Part 3: Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope |
| EN 875-1995 |
金属材料焊接的破坏试验 冲击试验 试样定位、槽口取向和检验 |
Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination |
| EN 876-1995 |
金属材料焊接的破坏试验 熔焊接头中焊接金属的纵向拉伸试验 |
Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints |
| EN ISO 11127-5-1997 |
涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第5部分：含水量测定 |
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:1993) |
| EN 12373-4-1998 |
铝和铝合金 阳极氧化 第4部分：通过事先经酸处理的染斑试验估计封闭后 阳极氧化膜吸收能力的损失 |
Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment |
| EN 895-1995 |
金属材料焊接的破坏试验 横向抗拉试验 |
Destructive tests on welds in metallic materials - Transverse tensile test |
| EN ISO 11127-6-1997 |
涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第6部分：通过测量电导率测定水溶性杂质 |
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:1993) |
| EN 12373-5-1998 |
铝和铝合金 阳极氧化 第5部分：用导纳测量法评定封闭阳极氧化膜的质量 |
Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance |
| EN 910-1996 |
金属材料焊接的破坏试验 弯曲试验 |
Destructive tests on welds in metallic materials - Bend tests |
| EN ISO 11127-7-1997 |
涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第7部分：水溶性氯化物的测定 |
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water soluble chlorides (ISO 11127-7:1993) |
| EN 12373-6-1998 |
铝和铝合金 阳极氧化 第6部分：通过测量事发未经酸处理的磷酸/铬酸中浸泡后的质量损失评定封闭阳极氧化膜 |
Aluminium and aluminium alloys - Anodizing - Part 6: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment |
| EN 970-1997 |
熔焊的非损检测 视觉检查 |
Non-destructive examination of fusion welds - Visual examination |
| EN 1043-1-1995 |
金属材料焊接的破坏试验 硬度测试 第1部分：电弧焊接连接件的硬度试验 |
Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints |
| EN 582-1993 |
热喷涂层 抗拉粘附强度的测定 |
Thermal spraying; determination of tensile adhesive strength |
| EN 12373-8-1998 |
铝和铝合金 阳极氧化 第8部分：着色阳极氧化膜可比耐紫外光和耐热色牢固度的测定 |
Aluminium and aluminium alloys - Anodizing - Part 8: Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings |
| EN 1043-2-1996 |
金属材料焊接的破坏试验 硬度试验 第2部分：焊接连接件的显微硬度测试 |
Destructive tests on welds in metallic materials - Hardness test - Part 2: Micro hardness testing on welded joints |
| EN 1274-1996 |
热喷涂 粉末、成份、交货技术条件 |
Thermal spraying - Powders - Composition - Technical supply conditions |
| prHD 384.5.51 S3-2002 |
建筑物的电气设施 第5部分：电气设备的选择和安装 第51章：通用规则 |
Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment; Common rules (IEC 60364-5-51:1997, modified) |
| EN 60601-2-28-1993 |
医用电气设备 第2－28部分：医疗诊断用X射线源组件和X射线管组件规范 |
Medical electrical equipment; part 2-28: particular requirements for the safety of X-ray source assemblies and X-ray tube assemblies for medical diagnosis (IEC 60601-2-28:1993) |
| EN 61223-3-1-1999 |
医用成像部门的评定及例行试验 第3-1部分：验收试验 X-射线摄影和X射线透视设备的图像性能 |
Evaluation and routine testing in medical imaging departments - Part 3-1: Acceptance tests - Imaging performance of X-ray equipment for radiographic and radioscopic systems (IEC 61223-3-1:1999) |
| EN 60336-1995 |
医用诊断装置X射线管组件 聚焦特性 |
X-ray tube assemblies for medical diagnosis - Characteristics of focal spots (IEC 60336:1993) |
| EN 60601-2-32-1994 |
医用电气设备 第2－32部分：X射线设备附属设备安全的特殊要求 |
Medical electrical equipment - Part 2-32: Particular requirements for the safety of associated equipment of X-ray equipment (IEC 60601-2-32:1994) |
| EN 61223-3-2-1996 |
医用成像部门的评定及例行试验 第3-2部分：验收试验 乳腺摄影X-射线设备图像性能 |
Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests - Imaging performance of mammographic X-ray equipment (IEC 61223-3-2:1996) |
| EN 60601-2-40-1998 |
医疗电气设备 第2－40部分：电子机动描记器及诱发反映设备安全专用要求 |
Medical electrical equipment - Part 2-40: Particular requirements for the safety of electromygraphs and evoked response equipment (IEC 60601-2-40:1998) |
| EN 60522-1999 |
X射线管装置的永久滤波的测定 |
Determination of the permanent filtration of X-ray tube assemblies (IEC 60522:1999) |
| EN 61223-3-3-1996 |
医用成像部门的评定及例行试验 第3-3部分：验收试验 数字减影血管造影X-射线设备的图像性能 |
Evaluation and routine testing in medical imaging departments - Part 3-3: Acceptance tests - Imaging performance of X-ray equipment for digital subtraction angiography (DSA) (IEC 61223-3-3:1996) |
| EN 60601-2-43-2000 |
医疗电气设备 第2－43部分：介入过程用Ｘ射线设备安全专用要求 |
Medical electrical equipment - Part 2-43: Particular requirements for the safety of X-ray equipment for interventional procedures (IEC 60601-2-43:2000) |
| EN 60580-2000 |
医用电气设备 剂量面积仪 |
Medical electrical equipment - Dose area product meters (IEC 60580:2000) |
| EN 61223-3-4-2000 |
医用成像部门的评定及例行试验 第3-4部分：验收试验 牙科X射线设备的图像性能 |
Evaluation and routine testing in medical imaging departments - Part 3-4: Acceptance test- Imaging performance of dental X-ray equipment (IEC 61223-3-4:2000) |
| EN 60601-2-45-2001 |
医用电气设备 第2－45部分：乳腺X射线摄影设备和乳腺摄影立体定位器安全专用要求 |
Medical electrical equipment - Part 2-45: Particular requirements for the safety of mammographic X-ray equipment and mammographic stereotactic devices (IEC 60601-2-45:2001) |
| EN 61262-1-1994 |
医疗电气设备 光电X-射线影像增强器特性 第1部分：入射野的测定 |
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 1: Determination of the entrance field size (IEC 61262-1:1994) |
| EN 60601-1-3-1994 |
医用电气设备 第1部分：安全通用要求 并列标准 X射线诊断设备的辐射防护的一般要求 |
Medical electrical equipment - Part 1: General requirements for safety - 3. Collateral standard: General requirements for radiation protection in diagnostic X-ray equipment (IEC 60601-1-3:1994) |
| EN 60613-1990 |
医用诊断旋转阳极Ｘ射线管的电、热和负载特性 |
Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnosis |
| EN 61262-2-1994 |
医疗电气设备 光电X-射线影像增强器特性 第2部分：换算因子的测定 |
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 2: Determination of the conversion factor (IEC 61262-2:1994) |
| EN 60789-1993 |
放射性核素成像设备的性能和试验条件 ＡＮＧＥＲ（安格型）伽玛照相机 |
Characteristics and test conditions of radionuclide imaging devices; Anger type gamma cameras (IEC 60789:1992) |
| EN 60601-2-7-1998 |
医疗电气设备 第2－7部分：诊断X射线发生装置的高压发生器安全专用要求 |
Medical electrical equipment - Part 2-7: Particular requirements for the safety of high-voltage generators of diagnostic X-ray generators (IEC 60601-2-7:1998) |
| EN 61262-3-1994 |
医疗电气设备 光电X-射线影像增强器特性 第3部分：亮度分布及非均匀性测定 |
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3: Determination of the luminance distribution and luminance non-uniformity (IEC 61262-3:1994) |
| EN 61223-2-4-1994 |
医用成像部门的评定及例行试验 第2-4部分：稳定性试验 硬考贝照相机 |
Evaluation and routine testing in medical imaging departments - Part 2-4: Constancy tests - Hard copy cameras (IEC 61223-2-4:1994) |
| EN 61262-4-1994 |
医疗电气设备 光电X-射线影像增强器特性 第4部分：影像畸变的测定 |
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 4: Determination of the image distortion (IEC 61262-4:1994) |
| EN 60601-2-9-1996 |
医用电器设备 第2－9部分：放射治疗中与患者接触的计量仪与辐射探测器连接的安全专用要求 |
Medical electrical equipment - Part 2-9: Particular requirements for the safety of patient contact dosemeters used in radiotherapy with electrically connected radiation detectors (IEC 60601-2-9:1996) |
| EN 61223-2-5-1994 |
医用成像部门的评定及例行试验 第2-5部分：稳定性试验 图像显示装置 |
Evaluation and routine testing in medical imaging departments - Part 2-5: Constancy tests - Image display devices (IEC 61223-2-5:1994) |
| EN 61262-5-1994 |
医疗电气设备 光电X-射线影像增强器特性 第5部分：次量子系统的测定 |
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 5: Determination of the detective quantum efficiency (IEC 61262-5:1994) |
| EN 60601-2-11-1997 |
医疗电气设备 第2-11部分：γ射束治疗设备安全专用要求 |
Medical electrical equipment - Part 2-11: Particular requirements for the safety of gamma beam therapy equipment (IEC 60601-2-11:1997) |
| EN 61223-2-6-1994 |
医用成像部门的评定及例行试验 第2-6部分：稳定性试验 经过计算的断层摄影X-射线设备 |
Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests - X-ray equipment for computed tomography (IEC 61223-2-6:1994) |
| EN 61262-6-1994 |
医疗电气设备 光电X-射线影像增强器特性 第6部分：对比度及伪影系数的测定 |
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 6: Determination of the contrast ratio and veiling glare index (IEC 61262-6:1994) |
| EN 61262-7-1995 |
医疗电气设备 光电X-射线影像增强器特性 第7部分：调制传递函数的测定 |
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 7: Determination of the modulation transfer function (IEC 61262-7:1995) |
| EN 60601-2-49-2001 |
医用电气设备 第2-49部分：多功能病人监护设备安全的特殊要求 |
Medical electrical equipment - Part 2-49: Particular requirements for the safety of multifunction patient monitoring equipment (IEC 60601-2-49:2001) |
| EN 61267-1994 |
医用诊断X射线设备 测定特性用辐射条件 |
Medical diagnostic X-ray equipment - Radiation conditions for use in the determination of characteristics (IEC 61267:1994) |
| EN 867-1-1997 |
消毒器中使用的非生物系统 第1部分：一般要求 |
Non-biological systems for use in sterilizers - Part 1: General requirements |
| EN 60601-3-1-1996 |
医疗电气设备 第3－1部分：经皮氧分压和二氧化碳分压监护基本性能要求 |
Medical electrical equipment - Part 3-1: Essential performance requirement for transcutaneous oxygen and carbon dioxide partial pressure monitoring equipment (IEC 60601-3-1:1996) |
| EN 61331-3-1999 |
医用诊断X射线辐射防护器具 第3部分：防护服和性腺防护器具 |
Protective devices against diagnostic medical X-radiation - Part 3: Protective clothing and protective devices for gonads (IEC 61331-3:1998) |
| EN 867-2-1997 |
消毒器中使用的非生物系统 第2部分：处理指示器(A级) |
Non-biological systems for use in sterilizers - Part 2: Process indicators (Class A) |
| EN 131802-1997 |
空白详细规范：金属箔聚丙烯薄膜介质直流固定电容器 评定水平EZ |
Blank detail specification: Fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level EZ |
| EN 61675-1-1998 |
放射性核素成像设备 性能和试验条件 第1部分：正电子发射断层摄影 |
Radionuclide imaging devices - Characteristics and test conditions - Part 1: Positron emission tomographs (IEC 61675-1:1998) |
| EN 867-4-2000 |
消毒器中使用的非生物系统 第4部分：选择蒸汽渗透探测用Bowie和Dick试验之一的指示器规范 |
Non-biological systems for use in sterilizers - Part 4: Specification for indicators as an alternative to the Bowie and Dick test for the detection of steam penetration |
| EN 130202-1998 |
空白详细规范：非固体电解质多孔阳极钽固定电容器(子系2) |
Blank detail specification: Fixed tantalum capacitors with non-solid electrolyte, porous anode (sub-family 2) |
| EN 61675-2-1998 |
放射性核素成像设备 性能和试验条件 第2部分：单光子发射计算断层摄影 |
Radionuclide imaging devices - Characteristics and test conditions - Part 2: Single photon emission computer tomographs (IEC 61675-2:1998) |
| EN 867-5-2001 |
消毒器中使用的非生物系统 第5部分：小型B型和S型灭菌器性能测试中使用的指示器系统和过程任务装置规范 |
Non-biological systems for use in sterilizers - Part 5: Specification for indicator systems and process challenge devices for use in performance testing for small sterilizers type B and type S |
| EN 130300-1998 |
分规范：固体和非固体电解质铝电解质电容器 |
Sectional specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte |
| EN 1422-1997 |
医用灭菌器 环氧乙烷灭菌器 要求和试验方法 |
Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods |
| EN 61675-3-1998 |
放射性核素成像设备 性能和试验条件 第3部分：全身成像系统中的伽玛照相机 |
Radionuclide imaging devices - Characteristics and test conditions - Part 3: Gamma camera based whole body imaging systems (IEC 61675-3:1998) |
| EN 61010-2-042-1997 |
测量、控制和实验室用电气设备的安全要求 第2－042部分：医用材料处理及实验室加工用毒性气体蒸压器和消毒 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-042: Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials, and for laboratory processes (IEC 61010) |
| EN 61847-1998 |
超声学 外科装置 基本输出特性的测量和标示 |
Ultrasonics - Surgical systems - Measurement and declaration of the basic output characteristics (IEC 61847:1998) |
| EN 301080 V 1.1.1-1997 |
传输与多路复用技术（TM） 数字无线接力系统（DRRS） 在3GHz至11GHz的波段范围内频分多址联接（FDMA）的 |
Transmission and Multiplexing (TM) - Digital Radio Relay Systems (DRRS) - Frequency Division Multiple Access (FDMA) point to multipoint DRRS in the band 3 GHz to 11 GHz |
| EN 61010-2-043-1997 |
测量、控制和实验室用电气设备的安全要求 第2－043部分：医用材料处理及实验室加工用热空气或热惰性气体干 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-043: Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the treatment of medical materials, and for laboratory proc |
| HD 364 S2-1983 |
医疗X光设备用高压电缆插头和插座连接 |
High-voltage cable plug and socket connections for medical X-ray equipment |
| EN 301124 V 1.1.1-1998 |
传输与多路复用技术（TM） 数字无线接力系统（DRRS） 在3GHz至11GHz频带范围内直接序列码分多址联接（DS- |
Transmission and Multiplexing (TM) - Digital Radio Relay Systems (DRRS) - Direct Sequence Code Division Multiple Access (DS-CDMA) point-to-multipoint DRRS in frequency bands in the range 3 GHz to 11 GHz |
| EN 61010-2-045-2000 |
测量、控制和实验室用电气设备的安全要求 第2－045部分：医疗、制药、兽医和试验室用洗涤器消毒的特殊要求 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-045: Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields (IEC 61010-2-045:2000) |
| EN 866-6-1999 |
测试消毒器和消毒过程的生物系统 第6部分：干热消毒器中使用的特殊系统 |
Biological systems for testing sterilizers and sterilization processes - Part 6: Particular systems for use in dry heat sterilizers |
| EN 301126-1 V 1.1.1-1997 |
传输与多路复用技术（TM） 数字无线接力系统（DRRS） DRRS的一致性测试 第1部分：点对点设备参数 |
Transmission and Multiplexing (TM) - Digital Radio Relay Systems (DRRS) - Conformance Testing for DRRS - Part 1: Point-to-point equipment parameters |
| EN 1040-1997 |
化学消毒剂和防腐剂 基本消毒活性 试验方法和要求（第1期） |
Chemical disinfectants and antiseptics - Basic bactericidal activity - Test method and requirements (phase 1) |
| EN 61266-1995 |
超声学 手持探头式多普勒胎儿心音探测仪 性能要求、测量方法和报告 |
Ultrasonics - Hand-held probe Doppler foetal heartbeat detectors - Performance requirements and methods of measurement and reporting (IEC 61266:1994) |
| EN 866-7-1999 |
测试消毒器和消毒过程的生物系统 第7部分：湿热消毒器中使用的自备生物指示器系统的特殊要求 |
Biological systems for testing sterilizers and sterilization processes - Part 7: Particular requirements for self-contained biological indicator systems for use in moist heat sterilizers |
| EN 301128 V 1.1.1-1997 |
传输与多路复用技术（TM） 数字无线接力系统（DRRS） 准同步数字系列（PDH） 在13GHz、15GHz和18GHz频率 |
Transmission and Multiplexing (TM) - Digital Radio Relay Systems (DRRS) - Plesiochronous Digital Hierarchy (PDH) - Low and medium capacity DRRS operating in the 13 GHz, 15 GHz and 18 GHz frequency bands |
| EN 866-8-1999 |
测试消毒器和消毒过程的生物系统 第8部分：乙烯氧化物消毒器中使用的自备生物指示器系统的特殊要求 |
Biological systems for testing sterilizers and sterilization processes - Part 8: Particular requirements for self-contained biological indicator systems for use in ethylene oxide sterilizers |
| EN 301152-1 V 1.2.1-1998 |
智能网（IN） IN 能力集-1（CS1）范围 智能网应用规程（INAP） 逻辑增强移动网用户化应用（CAMEL） 第1 |
Intelligent Network (IN) - IN Capability Set 1 (CS1) extension - Intelligent Network Application Protocol (INAP) - Customized Applications for Mobile network Enhanced Logic (CAMEL) - Part 1: Protocol specification |
| EN 61303-1995 |
医疗电气设备 放射性核素准直器 描述性能的特殊方法 |
Medical electrical equipment - Radionuclide calibrators - Particular methods for describing performance (IEC 61303:1994) |
| EN 301167 V 1.1.1-1998 |
传输与多路复用技术（TM） 同步数字系列（SDH）传输设备的管理 失效管理和性能监测 功能描述 |
Transmission and Multiplexing (TM) - Management of Synchronous Digital Hierarchy (SDH) transmission equipment - Fault management and performance monitoring; Functional description (Endorsement of the English version EN 301167 V 1.1.1 (1998-08) as German |
| EN 301192 V 1.1.1-1997 |
数字视频广播（DVB） 数字广播用DVB规范 |
Digital Video Broadcasting (DVB) - DVB specification for data broadcasting |
| EN 301193 V 1.1.1-1998 |
数字视频广播（DVB） 通过数字增强型无绳通信（DECT）的交互信道 |
Digital Video Broadcasting (DVB) - Interaction channel through the Digital Enhanced Cordless Telecommunications (DECT) |
| EN 61828-2001 |
超声学 聚焦传感器 传输场的定义和测量方法 |
Ultrasonics - Focusing transducers - Definitions and measurement methods for the transmitted fields (IEC 61828:2001) |
| EN 60601-2-5-2000 |
医疗电气设备 第2－5部分：超声治疗设备安全专用要求 |
Medical electrical equipment - Part 2-5: Particular requirements for the safety of ultrasonic physiotherapy equipment (IEC 60601-2-5:2000) |
| EN 301213-1 V 1.1.1-1998 |
传输与多路复用技术（TM） 数字无线接力系统（DRRS） 使用不同存取方法并在24.25GHz至29.5 GHz频率范围内 |
Transmission and Multiplexing (TM) - Digital Radio Relay Systems (DRRS) - Point-to-multipoint DRRS in frequency bands in the range 24,25 GHz to 29,5 GHz using different access methods - Part 1: Basic parameters |
| EN 60601-2-29-1999 |
医疗电气设备 第2－29部分：放射疗法模拟器安全的特殊要求 |
Medical electrical equipment - Part 2-29: Particular requirements for the safety of radiotherapy simulators (IEC 60601-2-29:1999) |
| prEN 13129-2-2003 |
铁路设备 主干线机车用空调 第2部分：型式试验 |
Railway applications - Air conditioning for main line rolling stock - Part 2: Type tests |
| EN 60601-2-36-1997 |
医疗电气设备 第2－36部分：体外碎石机的安全特殊要求 |
Medical electrical equipment - Part 2-36: Particular requirements for the safety of equipment for extracorporeally induced lithotripsy (IEC 60601-2-36:1997) |
| EN ISO 8612-2001 |
眼科仪器 张力计 |
Ophthalmic instruments - Tonometers (ISO 8612:2001) |
| prEN 13141-4-2003 |
建筑物通风 住宅通风设备组件/产品性能试验 第4部分：住宅通风系统用风扇 |
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential ventilation systems |
| EN 61168-1994 |
放射治疗模拟机 功能特性 |
Radiotherapy simulators - Functional performance characteristics (IEC 61168:1993) |
| EN 61689-1996 |
超声学 理疗装置 0.5MHz至5MHz频率范围内的性能要求和测量方法 |
Ultrasonics - Physiotherapy systems - Performance requirements and methods of measurement in the frequency range 0,5 MHz to 5 MHz (IEC 61689:1996) |
| prEN 14618-2003 |
|
Agglomerated stone - Terminology and classification |
| EN ISO 8980-1-1997 |
眼科光学 未切边成品眼镜片 第1部分：单焦点和多焦点镜片规范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications for single-vision and multifocal lenses (ISO 8980-1:1996) |
| EN 61846-1998 |
超声学 压力脉冲碎石器 声场特性 |
Ultrasonics - Pressure pulse lithotripters - Characteristics of fields (IEC 61846:1998) |
| prEN 13763-19-2003 |
民用炸药 雷管和继电器 第19部分：电子雷管点火脉冲的测定 |
Explosives for civil uses - Detonators and relays - Part 19: Determination of firing impulse on electric detonators |
| EN ISO 8980-2-1997 |
眼科光学 未切边成品眼镜片 第2部分：渐变焦镜片规范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 2: Specifications for progressive power lenses (ISO 8980-2:1996) |
| EN 62083-2001 |
医用电气设备 放射治疗计划系统的安全要求 |
Medical electrical equipment - Requirements for the safety of radiotheraphy treatment planning systems (IEC 62083:2000) |
| HD 395.2.6 S1-1987 |
医用电气设备 第2部分：微波治疗设备安全性的特殊要求 |
Medical electrical equipment - Part 2: Particular requirements for the safety of microwave therapy equipment |
| EN ISO 8980-3-1999 |
眼科光学 未切边成品眼镜片 第3部分：透光性规范和试验方法 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods (ISO 8980-3:1999) |
| EN ISO 9341-1998 |
光学和光学仪器 隐形眼镜 固定隐形眼镜中夹杂物和表面不完备性的测定 |
Optics and optical instruments - Contact lenses - Determination of inclusions and surface imperfections for rigid contact lenses (ISO 9341:1996) |
| EN 13503-3-2000 |
眼科植入物 眼内晶状体 第3部分：机械性质和试验方法（ISO/DIS11979-3-1999，修改） |
Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods (ISO 11979-3:1999, modified) |
| EN ISO 8980-4-2000 |
眼科光学 未切边成品眼镜片 第4部分：防反射涂层的试验方法和规范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflection coatings (ISO 8980-4:2000) |
| EN ISO 9342-1998 |
光学和光学仪器 焦距计校正用检验镜头 |
Optics and optical instruments - Test lenses for calibration of focimeters (ISO 9342:1996) |
| EN ISO 10338-1997 |
光学和光学仪器 隐形眼镜 曲率的确定 |
Optics and optical instruments - Contact lenses - Determination of curvature (ISO 10338:1996) |
| EN ISO 9337-1-2000 |
隐形眼镜 后银顶曲光度的测定 第1部分：用焦距计人工调焦的方法 |
Contact lenses - Determination of back vertex power - Part 1: Method using focimeter with manual focusing (ISO 9337-1:1999) |
| EN ISO 9363-1-1999 |
光学与光学仪器 隐形眼镜 隐形眼镜材料致癌的测定 第1部分：琼脂用作细菌固体培养基中的支持物的免疫扩 |
Optics and optical instruments - Contact lenses - Determination of cytotoxicity of contact lens material - Part 1: Agar overlay test and growth inhibition test (ISO 9363-1:1994) |
| EN ISO 10339-1999 |
眼科光学 隐形眼镜 水凝胶镜片含水量的确定 |
Ophthalmic optics - Contact lenses - Determination of water content of hydrogel lenses (ISO 10339:1997) |
| EN ISO 9338-1998 |
光学和光学仪器 隐形眼镜 直径的测定 |
Optics and optical instruments - Contact lenses - Determination of the diameters (ISO 9338:1996) |
| EN ISO 9394-1998 |
眼科光学 接触镜与接触镜保护产品 用兔眼视觉研究法测定生物相容性 |
Ophthalmic optics - Contact lenses and contact lens care products - Determination of biocompatibility by ocular study using rabbit eyes (ISO 9394:1998) |
| EN ISO 10340-1996 |
光学和光学仪器 因形眼镜 确定可渗出物质的方法 |
Optics and optical instruments - Contact lenses - Method for determining the extractable substances (ISO 10340:1995) |
| EN ISO 9339-1-1998 |
光学和光学仪器 隐形眼镜 厚度测定 第1部分：固定隐形眼镜 |
Optics and optical instruments - Contact lenses - Determination of the thickness - Part 1: Rigid contact lenses (ISO 9339-1:1996) |
| EN ISO 9456-1996 |
光学和光学仪器 眼科光学 眼镜架标志 |
Optics and optical instruments - Ophthalmic optics - Marking of spectacle frames (ISO 9456:1991) |
| EN ISO 10341-1999 |
眼科仪器 折射头 |
Ophthalmic instruments - Refractor heads (ISO 10341:1997) |
| EN ISO 9340-1998 |
光学和光学仪器 隐形眼镜 固定隐形眼镜的应力测定 |
Optics and optical instruments - Contact lenses - Determination of strains for rigid contact lenses (ISO 9340:1996) |
| EN ISO 9801-1999 |
眼科仪器 测试箱镜头 |
Ophthalmic instruments - Trial case lenses (ISO 9801:1997) |
| EN ISO 10343-1999 |
眼科仪器 检眼仪 |
Ophthalmic instruments - Ophthalmometers (ISO 10343:1997) |
| EN ISO 10344-1998 |
光学和光学仪器 隐形眼镜 接触镜试验用含盐溶液 |
Optics and optical instruments - Contact lenses - Saline solution for contact lens testing (ISO 10344:1996) |
| CR 13768-2001 |
污泥特性 污泥和家庭废弃物组合焚烧的良好实践 |
Characterization of sludges - Good practice for combined incineration of sludges and household wastes |
| EN ISO 9913-1-1998 |
光学和光学仪器 隐形眼镜 第1部分：用FATT法对氧渗透性和可透性的测定 |
Optics and optical instruments - Contact lenses - Part 1: Determination of oxygen permeability and transmissibility by the FATT method (ISO 9913-1:1996) |
| EN ISO 10938-1998 |
眼科仪器 图片投影仪 |
Ophthalmic instruments - Chart projectors (ISO 10938:1998) |
| EN ISO 11986-2000 |
眼科光学 隐形眼镜和隐形眼镜保护产品 保护液吸收和释放测定指南 |
Ophthalmic optics - Contact lenses and contact lens care products - Guidelines for the determination of preservative uptake and release (ISO 11986:1999) |
| EN ISO 11978-2000 |
眼科光学 隐形眼镜和隐形眼镜保护产品 制造商提供的信息 |
Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer (ISO 11978:2000) |
| EN ISO 16284-2001 |
眼科光学 眼科光学设备的信息交换 |
Ophthalmic optics - Information interchange for ophthalmic optical equipment (ISO 16284:2001) |
| EN ISO 11987-1997 |
眼科光学 隐形眼镜 储存寿命的测定 |
Ophthalmic Optics - Contact lenses - Determination of shell-life (ISO 11987:1997) |
| EN ISO 11979-1-1999 |
眼科植入物 眼内透镜 第1部分：词汇 |
Ophthalmic implants - Intraocular lenses - Part 1: Vocabulary (ISO 11979-1:1999) |
| EN ISO 3950-1997 |
牙科学 牙齿和口腔区位的名称与符号体系 |
Dentistry - Designation system for teeth and areas of the oral cavity (ISO 3950:1995) |
| EN ISO 11979-2-1999 |
眼科植入物 眼内透镜 第2部分：光学特性和测试方法 |
Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and test methods (ISO 11979-2:1999) |
| EN ISO 12864-1997 |
眼科光学 隐形眼镜 杂散光的测定 |
Ophthalmic optics - Contact lenses - Determination of scattered light (ISO 12864:1997) |
| EN 1641-1996 |
牙科学 牙科用医疗装置 材料 |
Dentistry - Medical devices for dentistry - Materials |
| EN ISO 12865-1998 |
眼科仪器 检眼镜 |
Ophthalmic instruments - Retinoscopes (ISO 12865:1998) |
| EN ISO 11979-4-2000 |
眼科植入物 眼内透镜 第4部分：标签和信息 |
Ophthalmic implants - Intraocular lenses - Part 4: Labelling and information (ISO 11979-4:2000) |
| EN 21560-1991 |
牙科学 牙科汞 |
Dentistry - Dental mercury (ISO 1560:1985) |
| EN ISO 12867-1998 |
眼科仪器 试验架 |
Ophthalmic instruments - Trial frames (ISO 12867:1998) |
| EN ISO 11980-1997 |
眼科光学 隐形眼镜和隐形眼镜保护产品 临床检测指南 |
Ophthalmic optics - Contact lenses and contact lens care products - Guidance for clinical investigations (ISO 11980:1997) |
| EN 21563-1991 |
藻酸盐牙科印模材料 |
Alginate dental impression material (ISO 1563:1990) |
| EN ISO 12870-1997 |
眼科光学 眼镜镜框 一般要求和试验方法 |
Ophthalmic optics - Spectacle frames - General requirements and test methods (ISO 12870:1997) |
| EN ISO 13212-1999 |
眼科光学 隐形眼镜保护产品 储存寿命的测定指南 |
Ophthalmic optics - Contact lens care products - Guidelines for the determination of shelf-life (ISO 13212:1999) |
| EN ISO 11981-1999 |
眼科光学 隐形眼镜和隐形眼镜保护产品 隐形眼镜与隐形眼镜保护产品物理兼容性的测定 |
Ophthalmic optics - Contact lenses and contact lens care products - Determination of physical compatibility of contact lens care products with contact lenses (ISO 11981:1999) |
| EN 23107-1991 |
牙科氧化锌/丁香酚及不含丁香酚的氧化钭水门汀 |
Dental zinc oxide/eugenol cements and zinc oxide non-eugenol cements (ISO 3107:1988) |
| EN ISO 13230-1999 |
眼科光学 条形码规范 |
Ophthalmic optics - Bar code specifications (ISO 13230:1999) |
| EN 26874-1992 |
牙科树脂基窗沟封封闭剂 |
Dental resin-based pit and fissure sealants (ISO 6874:1988) |
| EN ISO 15004-1997 |
眼科仪器 基本要求和试验方法 |
Ophthalmic instruments - Fundamental requirements and test methods (ISO 15004:1997) |
| EN ISO 11984-1999 |
眼科光学 隐形眼镜 刚性镜弯曲和断裂强度的测定 |
Ophthalmic optics - Contact lenses - Determination of rigid lens flexure and breakage (ISO 11984:1999) |
| EN 13428-2000 |
包装 制造和合成的特殊要求 防止资源减少 |
Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction |
| EN ISO 16017-1-2000 |
室内、周围和工作场所空气 用吸附管/热解吸/毛细管气相色谱法作挥发性有机化合物的取样及分析 第1部分： |
Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000) |
| EN ISO 7405-1997 |
牙科学 用于牙科的医疗器械生物相容性临床前评价 牙科材料的试验方法 |
Dentistry - Preclinical evaluation of biocompatibility of medical devices used in dentistry - Test methods for dental materials (ISO 7405:1997) |
| EN 12341-1998 |
空气质量 悬浮颗粒物PM10系数的测定 标准方法和验证测量方法标准等效性的现场试验程序 |
Air quality - Determination of the PM10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods |
| EN 13431-2000 |
包装 以能量再生的方式回收的包装的要求，包括最小热值规范 |
Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value |
| EN 12515-1997 |
热环境 利用要求湿度的计算值作热应力的分析测定和说明 |
Hot environments - Analytical determination and interpretation of thermal stress using calculation of required sweat rate (ISO 7933:1989, modified) |
| EN ISO 7490-2000 |
牙科含石膏铸造包埋材料 |
Dental gypsum-bonded casting investments (ISO 7490:2000) |
| EN 13432-2000 |
包装 通过复合和降解而回收的包装的要求 包装终验试验大纲和评估标准 |
Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging |
| EN ISO 7726-2001 |
热环境人类工效学 测定物理量的方法 |
Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998) |
| EN ISO 7491-2000 |
牙科材料 色稳定性的测定 |
Dental materials - Determination of colour stability (ISO 7491:2000) |
| EN ISO 11245-2000 |
牙齿修复 磷酸盐结合剂耐火模铸材料 |
Dental restorations - Phosphate-bonded refractory die materials (ISO 11245:1999) |
| EN ISO 8891-2000 |
贵金属含量至少为25%但不低于75%的牙科用铸造合金 |
Dental casting alloys with noble metal content of at least 25 % but less than 75 % (ISO 8891:1998) |
| EN ISO 11246-1998 |
牙科硅酸乙脂结合剂铸造包埋材料 |
Dental ethyl silicate bonded casting investments (ISO 11246:1996) |
| EN ISO 10551-2001 |
热环境人类工效学 通过主观判定级别评价热环境的影响 |
Ergonomics of the thermal environment - Assessment of the influence of the thermal environment using subjective judgement scales (ISO 10551:1995) |
| EN ISO 11399-2000 |
热环境人类工效学 相关国际标准的原则与应用 |
Ergonomics of the thermal environment - Principles and application of relevant International Standards (ISO 11399:1995) |
| EN ISO 9693-2000 |
牙科金属烤瓷修复系统 |
Metal-ceramic dental restorative systems (ISO 9693:1999) |
| EN ISO 11609-1998 |
牙科学 牙膏 要求、试验方法和标志 |
Dentistry - Toothpastes - Requirements, test methods and marking (ISO 11609:1995) |
| EN ISO 12894-2001 |
热环境的人类工效学 暴露于极热或极冷环境时个人的医学观察 |
Ergonomics of the thermal environment - Medical supervision of individuals exposed to extreme hot or cold environments (ISO 12894:2001) |
| EN ISO 9694-1998 |
牙科磷酸盐结合剂铸造包埋材料 |
Dental phosphate-bonded casting investments (ISO 9694:1996) |
| EN ISO 12163-2000 |
牙科基托/模型蜡 |
Dental baseplate/modelling wax (ISO 12163:1999) |
| EN 481-1993 |
工作场所空气 度量空气沉降粒子的尺寸分数定义 |
Workplace atmospheres; size fraction definitions for measurement of airborne particles |
| EN ISO 13716-2000 |
牙科学 可逆和不可逆水解胶体印模材料系统 |
Dentistry - Reversible-irreversible hydrocolloid impression material systems (ISO 13716:1999) |
| EN ISO 9917-2-1999 |
牙科用水基胶粘剂 第2部分：光固化胶粘剂 |
Dental water-based cements - Part 2: Light-activated cements (ISO 9917-2:1998) |
| EN 482-1994 |
工作场所空气 化学试剂测量程序性能的一般要求 |
Workplace atmospheres - General requirements for the performance of procedures for the measurement of chemical agents |
| EN 689-1995 |
工作场所空气 为与极限值和测量对策比较通过化学试剂吸入来评定影响的指南 |
Workplace atmospheres - Guidance for the assessment of exposure by inhalation to chemical agents for comparison with limit values and measurement strategy |
| EN ISO 10139-2-2001 |
牙科学 活动义齿软衬材料 第2部分：长期使用的材料 |
Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use (ISO 10139-2:1999) |
| EN 1642-1996 |
牙科学 牙科用医疗装置 牙科植入物 |
Dentistry - Medical devices for dentistry - Dental implants |
| EN ISO 6873-2000 |
牙科石膏制品 |
Dental gypsum products (ISO 6873:1998) |
| EN ISO 10271-2001 |
牙科用的金属材料 腐蚀试验方法 |
Dental metallic materials - Corrosion test methods (ISO 10271:2001) |
| EN ISO 6877-1998 |
牙科牙根管充填尖(牙胶尖) |
Dental root-canal obturating points (ISO 6877:1995) |
| EN ISO 8282-1997 |
牙科设备 汞及合金混和器和调节器 |
Dental equipment - Mercury and alloy mixers and dispensers (ISO 8282:1994) |
| EN 1640-1996 |
牙科学 牙科学用医疗装置 设备 |
Dentistry - Medical devices for dentistry - Equipment |
| EN ISO 10477-1996 |
牙科学 高聚物基的牙冠和齿桥材料 |
Dentistry - Polymer based crown and bridge materials (ISO 10477:1992) |
| EN ISO 9680-1996 |
牙科工作灯(包括技术勘误1) |
Dental operating light (ISO 9680:1993 including Technical Corrigendum 1:1995) |
| EN ISO 6875-1996 |
牙科设备 牙科病人用椅 |
Dental equipment - Dental patient chair (ISO 6875:1995) |
| EN ISO 11143-1999 |
牙科设备 汞齐合金分离器 |
Dental equipment - Amalgam separators (ISO 11143:1999) |
| EN ISO 11244-1999 |
牙科钎焊包埋料 |
Dental brazing investments (ISO 11244:1998) |
| EN ISO 11144-1996 |
牙科设备 供水及排水管接头 |
Dental equipment - Connections for supply and waste lines (ISO 11144:1995) |
| EN ISO 7488-1995 |
牙科银汞合金搅拌器 |
Dental amalgamators (ISO 7488:1991) |
| EN ISO 2157-1995 |
牙科旋转器械 公称直径和命名代码 |
Dental rotary instruments - Nominal diameters and designation code number (ISO 2157:1992) |
| EN 1639-1996 |
牙科学 牙科用医疗设备 器械 |
Dentistry - Medical devices for dentistry - Instruments |
| EN ISO 7493-2000 |
牙科医生凳 |
Dental operators stool (ISO 7493:1997, including Technical Corrigendum 1:1999) |
| EN ISO 3630-1-1994 |
牙根管器械 第1部分：推管锉、扩大器、倒刺拔髓针、粗锉、糊剂输送器、探针及棉捻 |
Dental root-canal instruments - Part 1: Files, reamers, barbed broaches, rasps, paste carriers, explorers and cotton broaches (ISO 3630-1:1992) |
| EN 23964-1989 |
牙科学 牙科手机 连接尺寸 |
Dentistry - Dental handpieces - Coupling dimensions (ISO 3964:1982) |
| EN ISO 7711-3-1995 |
牙科旋转器械 金刚钻器械 第3部分：磨粒尺寸、标注与彩色编码 |
Dental rotary instruments - Diamond instruments - Part 3: Grit sizes, designation and colour code (ISO 7711-3:1992) |
| EN 27787-3-1993 |
牙科旋转器械 切割工具 第3部分：技工室研磨机用质合金刀具 |
Dental rotary instruments; Cutters; Part 3: Carbide laboratory cutters for milling machines (ISO 7787-3:1991) |
| EN ISO 3630-2-2000 |
牙根管器械 第2部分：扩大器 |
Dental root-canal instruments - Part 2: Enlargers (ISO 3630-2:2000) |
| EN ISO 7785-1-1999 |
牙科手机 第1部分：高速气动涡轮手机 |
Dental handpieces - Part 1: High-speed air turbine handpieces (ISO 7785-1:1997) |
| EN 29168-1994 |
手持式牙科器械 软管连接件 |
Dental handpieces - Hose connectors (ISO 9168:1991) |
| EN ISO 3630-3-1996 |
牙根管器械 第3部分：聚光镜、充填器和摊开器 |
Dental root-canal instruments - Part 3: Condensers, pluggers and spreaders (ISO 3630-3:1994) |
| EN 61205-1994 |
超声学 牙齿除垢系统 输出特性的测量和标示 |
Ultrasonics; Dental descaler systems; Measurement and declaration of the output characteristics (IEC 61205:1993) |
| EN ISO 7785-2-1997 |
牙科手机 第2部分：直角和弯角手机 |
Dental handpieces - Part 2: Straight and geared angle handpieces (ISO 7785-2:1995) |
| EN ISO 3823-1-1998 |
牙科旋转器械 牙钻 第1部分：不锈钢牙钻和硬质合金牙钻 |
Dental rotary instruments - Burs - Part 1: Steel and carbide burs (ISO 3823:1997) |
| EN ISO 1797-2-1995 |
牙科旋转器械 柄 第2部分：塑料柄 |
Dental rotary equipment - Shanks - Part 2: Shanks made of plastics (ISO 1797-2:1992) |
| EN ISO 7786-2001 |
牙科旋转器械 技工室用研磨器械 |
Dental rotary instruments - Laboratory abrasive instruments (ISO 7786:2001) |
| EN ISO 7492-1998 |
牙科探针 |
Dental explorers (ISO 7492:1997) |
| EN ISO 11499-1999 |
局部麻醉用注射针管 |
Dental cartridges for local anaesthetics (ISO 11499:1997) |
| EN ISO 7787-2-2000 |
牙科旋转器械 切割刀具 第2部分：技工室用硬质合金刀具 |
Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters (ISO 7787-2:2000) |
| EN ISO 7494-1997 |
牙科综合治疗设备 |
Dental units (ISO 7494:1996) |
| EN ISO 13294-1997 |
牙科手机 牙钻气动机 |
Dental handpieces - Dental air-motors (ISO 13294:1997) |
| EN ISO 7885-2000 |
一次性牙科直接注射针头 |
Sterile dental injection needles for single use (ISO 7885:2000) |
| EN ISO 7551-1998 |
牙科吸水捻 |
Dental absorbent points (ISO 7551:1996) |
| EN ISO 13295-1996 |
牙科旋转器械 心轴 |
Dental rotary instruments - Mandrels (ISO 13295:1994) |
| EN ISO 7711-1-1998 |
牙科旋转器械 金刚钻器械 第1部分：尺寸、要求、标记和包装 |
Dental rotary instruments - Diamond instruments - Part 1: Dimensions, requirements, marking and packaging (ISO 7711-1:1997) |
| EN ISO 9173-1-1995 |
拔牙钳 第1部分：螺钉和铰链接合型 |
Dental extraction forceps - Part 1: Screw and pin joint types (ISO 9173-1:1991) |
| EN ISO 13397-1-1995 |
牙周 刮匙、牙刮器和牙挖器? 第1部分：一般要求 |
Periodontal curettes, dental scalers and excavators - Part 1: General requirements (ISO 13397-1:1995) |
| EN 13503-5-2001 |
眼科植入物 眼内晶状体 第5部分：生物兼容性（ISO 11979-5:1999，修改） |
Ophthalmic implants - Intraocular lenses - Part 5: Biocompatibility (ISO 11979-5:1999, modified) |
| EN ISO 9997-1999 |
牙科卡式注射器 |
Dental cartridge syringes (ISO 9997:1999) |
| EN ISO 13397-3-1996 |
牙周 刮匙、牙刮器和牙挖器? 第3部分：牙刮器 H型 |
Periodontal curettes, dental scalers and excavators - Part 3: Dental scalers - H-type (ISO 13397-3:1996) |
| EN ISO 7711-2-1995 |
牙科旋转器械 金刚钻器械 第2部分：切盘 |
Dental rotary instruments - Diamond instruments - Part 2: Discs (ISO 7711-2:1992) |
| EN ISO 10323-1995 |
牙科旋转器械 切盘和轮的内径 |
Dental rotary instruments - Bore diameters for discs and wheels (ISO 10323:1991) |
| EN 13503-7-2001 |
眼科植入物 眼内晶状体 第7部分：临床试验（ISO 11979-7:2000，修改） |
Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations (ISO 11979-7:2001, modified) |
| EN ISO 13397-4-1997 |
牙周 刮匙、牙刮器和牙挖器? 第4部分：牙挖器 盘形 |
Periodontal curettes, dental scalers and excavators - Part 4: Dental excavators - Discoid-type (ISO 13397-4:1997) |
| EN ISO 15087-5-2000 |
牙科起子 第5部分：Bein起子 |
Dental elevators - Part 5: Bein elevators (ISO 15087-5:2000) |
| EN ISO 10637-2000 |
牙科设备 高和中容量抽吸系统 |
Dental equipment - High- and medium-volume suction systems (ISO 10637:1999) |
| EN 13503-8-2000 |
眼科植入物 眼内晶状体 第8部分：基本要求（ISO 11979-8:1999，修改） |
Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements (ISO 11979-8:1999, modified) |
| EN ISO 15087-6-2000 |
牙科起子 第6部分：Flohr起子 |
Dental elevators - Part 6: Flohr elevators (ISO 15087-6:2000) |
| EN ISO 11498-1999 |
牙科手机 牙科用低压电动机 |
Dental handpieces - Dental low-voltage electrical motors (ISO 11498:1997) |
| EN ISO 15087-1-2001 |
牙科起子 第1部分：一般要求 |
Dental elevators - Part 1: General requirements (ISO 15087-1:1999) |
| ENV 14027-2001 |
检测镀膜金属和组合眼镜框中镍析出前模拟磨损的方法 |
Method for the simulation of wear before the detection of nickel release from coated metal and combination spectacle frames |
| EN ISO 15098-1-2001 |
牙科镊子 第1部分：一般要求 |
Dental tweezers - Part 1: General requirements (ISO 15098-1:1999) |
| EN ISO 15087-2-2000 |
牙科起子 第2部分：沃里克吉姆斯起子 |
Dental elevators - Part 2: Warwick James elevators (ISO 15087-2:2000) |
| EN ISO 7944-1998 |
光学和光学仪器 基准波长 |
Optics and optical instruments - Reference wavelengths (ISO 7944:1998) |
| EN ISO 15098-2-2000 |
牙科镊子 第2部分：Meriam型 |
Dental tweezers - Part 2: Meriam types (ISO 15098-2:2000) |
| EN ISO 15087-3-2000 |
牙科起子 第3部分：Cryer起子 |
Dental elevators - Part 3: Cryer elevators (ISO 15087-3:2000) |
| EN ISO 8321-2-2000 |
眼科光学 接触透镜的材料、光学及尺寸特性的规范 第2部分：单焦凝胶透镜 |
Ophthalmic optics - Specifications for material, optical and dimensional properties of contact lenses - Part 2: Single-vision hydrogel lenses (ISO 8321-2:2000) |
| EN ISO 15098-3-2000 |
牙科镊子 第3部分：学院型 |
Dental tweezers - Part 3: College types (ISO 15098-3:2000) |
| CR 13695-1-2000 |
包装材料 关于测量和验证四种重金属和其它危险物资存在于包装材料中并向环境释放的要求 第1部分：关于测 |
Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment - Part 1: Requirements for measuring and verifying the four heavy metals present in packaging |
| EN ISO 15606-1999 |
牙科手机 气动刮器和刮器梢尖 |
Dental handpieces - Air-powered scalers and scaler tips (ISO 15606:1999) |
| EN ISO 8429-1996 |
光学与光学仪器 眼科学 分度盘刻度 |
Optics and optical instruments - Ophthalmology - Graduated dial scale (ISO 8429:1986) |
| EN ISO 15087-4-2000 |
牙科起子 第4部分：Couplnad起子 |
Dental elevators - Part 4: Coupland elevators (ISO 15087-4:2000) |
| EN 1174-1-1996 |
医疗器械的消毒 产品的微生物群数的估算 第1部分：要求 |
Sterilization of medical devices - Estimation of the population of micro-organisms on product - Part 1: Requirements |
| EN 550-1994 |
医疗器械的消毒 用环氧乙烷消毒的确认和常规控制 |
Sterilization of medical devices - Validation and routine control of ethylene oxide sterilization |
| EN ISO 8596-1996 |
眼科光学 视觉敏锐度测验 标准验光字体及其演示 |
Ophthalmic optics - Visual acuity testing - Standard optotype and its presentation (ISO 8596:1994) |
| EN 1174-2-1996 |
医疗器械的消毒 产品的微生物总数的估算 第2部分：指南 |
Sterilization of medical devices - Estimation of the population of micro-organisms on product - Part 2: Guidance |
| EN ISO 10304-2-1996 |
水质 离子色谱法测定溶解性阴离子 第2部分：对废水中溴化物、氟化物、硝酸盐、亚硝酸盐、亚磷酸盐和硫酸 |
Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 2: Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water (ISO 10304-2:1995) |
| EN 554-1994 |
医疗器械的消毒 湿热消毒的确认和常规控制 |
Sterilization of medical devices - Validation and routine control of sterilization by moist heat |
| EN ISO 8597-1996 |
光学与光学仪器 视觉敏锐度测验 与验光字体相关的方法 |
Optics and optical instruments - Visual acuity testing - Method of correlating optotypes (ISO 8597:1994, including Technical Corrigendum 1:1995) |
| EN 1174-3-1996 |
医疗器械的消毒 产品的微生物总数的估算 第3部分：微生物技术确认方法指南 |
Sterilization of medical devices - Estimation of the population of micro-organisms on product - Part 3: Guide to the methods for validation of microbiological techniques |
| EN ISO 10304-3-1997 |
水质 离子色谱法测定溶解性阴离子 第3部分：铬酸盐、碘化物、亚硫酸盐、硫氰酸盐和硫代硫酸酯的测定 |
Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate (ISO 10304-3:1997) |
| EN 556-1-2001 |
医疗器械的消毒 标明为“消过毒”的医疗器械的要求 第1部分：定期消毒的医疗器械的要求 |
Sterilization of medical devices - Requirements for medical devices to be designated "STERILE" - Part 1: Requirements for terminally sterilized medical devices |
| EN ISO 8598-1998 |
光学与光学仪器 焦距计 |
Optics and optical instruments - Focimeters (ISO 8598:1996) |
| EN ISO 14161-2000 |
医疗保健产品灭菌 生物指示物 选择、使用和检验结果解释指南 |
Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2000) |
| EN ISO 10304-4-1999 |
水质 离子色谱法测定溶解性阴离子 第4部分：轻度污染水质中氯酸盐、氯化物、次氯酸盐的测定 |
Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination (ISO 10304-4:1997) |
| EN 866-1-1997 |
测试消毒器和消毒过程的生物系统 第1部分：一般要求 |
Biological systems for testing sterilizers and sterilization processes - Part 1: General requirements |
| EN ISO 8599-1996 |
光学与光学仪器 隐形眼镜 光谱和光透射率的测定 |
Optics and optical instruments - Contact lenses - Determination of the spectral and luminous transmittance (ISO 8599:1994) |
| EN ISO 14937-2000 |
医疗保健产品灭菌 消毒剂的特性及医疗装置消毒的开发、确认和程序控制的一般要求 |
Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2000) |
| EN ISO 10695-2000 |
水质 部分有机氮和磷化合物的测定 气相色谱法 |
Water quality - Determination of selected organic nitrogen and phosphorus compounds - Gas chromatographic methods (ISO 10695:2000) |
| EN 866-3-1997 |
测试消毒器和消毒过程的生物系统 第3部分：湿热消毒器中使用的特殊系统 |
Biological systems for testing sterilizers and sterilization processes - Part 3: Particular systems for use in moist heat sterilizers |
| EN 1276-1997 |
化学消毒剂和防腐剂 用在食品、工业、家用、和公共区域的化学消毒剂和防腐剂的微生物活性评估的定量悬浮实 |
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic, and institutional areas - Test method and requirements (Phase2) |
| EN 866-4-1999 |
测试消毒器和消毒过程的生物系统 第4部分：照射消毒器中使用的特殊系统 |
Biological systems for testing sterilizers and sterilization processes - Part 4: Particular systems for use in irradiation sterilizers |
| EN ISO 11369-1997 |
水质 选择性植物处理剂的测定 固液萃取 紫外检测高效液相色谱法 |
Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction (ISO 11369:1997) |
| EN 1499-1997 |
化学消毒剂和防腐剂 卫生洗手液 试验方法和要求(第二阶段第二步) |
Chemical disinfectants and antiseptics - Hygienic handwash - Test method and requirements (phase 2/step 2) |
| EN 868-3-1999 |
经消毒的医疗器械用包装材料和系统 第3部分：生产纸袋（EN 868-4规定）和生产盒和卷筒用纸（EN 868-5规定 |
Packaging materials and systems for medical devices which are to be sterilized - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods |
| EN 866-5-1999 |
测试消毒器和消毒过程的生物系统 第5部分：低温蒸汽和甲醛消毒器中使用的特殊系统 |
Biological systems for testing sterilizers and sterilization processes - Part 5: Particular systems for use in low temperature steam and formaldehyde sterilizers |
| EN ISO 11732-1997 |
水质 氨氮的测定 流动分析(CFA和FIA)和光谱测定法 |
Water quality - Determination of ammonium nitrogen by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:1997) |
| EN 1500-1997 |
化学消毒剂和防腐剂 擦手剂 试验方法和要求(状态2步鄹2) |
Chemical disinfectants and antiseptics - Hygienic handrub - Test method and requirements (phase 2/step 2) |
| EN 868-4-1999 |
经消毒的医疗器械用包装材料和系统 第4部分：纸袋 要求和试验方法 |
Packaging materials and systems for medical devices which are to be sterilized - Part 4: Paper bags - Requirements and test methods |
| EN ISO 11885-1997 |
水质 电感耦合等离子体原子发射光谱法测定33种元素 |
Water quality - Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy (ISO 11885:1996) |
| EN ISO 9963-2-1995 |
水质 碱度的测定 第2部分：碳酸盐碱度的测定 |
Water quality - Determination of alkalinity - Part 2: Determination of carbonate alkalinity (ISO 9963-2:1994) |
| EN 1650-1997 |
化学消毒剂和防腐剂 用于食品、工业、家庭和机构领域的化学消毒剂和防腐剂的杀菌活性功效评估用定量悬浮试 |
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic, and institutional areas - Test method and requirements (Phase 2，Step 1) |
| EN 868-6-1999 |
经消毒的医疗器械用包装材料和系统 第6部分：生产经氧化乙烯或辐照消毒的医用包所用的纸 要求和试验方法 |
Packaging materials and systems for medical devices which are to be sterilized - Part 6: Paper for the manufacture of packs for medical use for sterilization by ethylene oxide or irradiation - Requirements and test methods |
| EN ISO 10301-1997 |
水质 高挥发性卤代烃的测定 气相色谱法 |
Water quality - Determination of highly volatile halogenated hydrocarbons - Gas-chromatographic methods (ISO 10301:1997) |
| EN 868-7-1999 |
经消毒的医疗器械用包装材料和系统 第7部分：生产经氧化乙烯或辐射消毒的医用热密封包所用的粘性涂覆纸 |
Packaging materials and systems for medical devices which are to be sterilized - Part 7: Adhesive coated paper for the manufacture of heat sealable packs for medical use for sterilization by ethylene oxide or irradiation - Requirements and test methods |
| EN 1656-2000 |
化学消毒剂和防腐剂 用于兽医领域的化学消毒剂的杀菌功效评估用定量悬浮试验 试验方法和要求 (第2阶段/ |
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary field - Test method and requirements (phase 2/step 1) |
| EN ISO 11905-1-1998 |
水质 氮的测定 第1部分：过硫酸盐氧化消解法 |
Water quality - Determination of nitrogen - Part 1: Method using oxidative digestion with peroxosulfate (ISO 11905-1:1997) |
| CR 13714-2001 |
污泥特性 污泥的使用和处置管理 |
Characterisation of sludges - Sludge management in relation to use or disposal |
| EN 868-8-1999 |
经消毒的医疗器械用包装材料和系统 第8部分：符合EN 285的蒸汽消毒器用可重复使用的消毒容器 要求和试验 |
Packaging materials and systems for medical devices which are to be sterilized - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods |
| EN 1657-2000 |
化学消毒剂和防腐剂 用于兽医领域的化学消毒剂的杀真菌功效评估用定量悬浮试验 试验方法和要求 (第2阶段 |
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectants and antiseptics used in veterinary field - Test method and requirements (phase 2, step 1) |
| CR 13767-2001 |
污泥特性 带/不带油脂和废屑的污泥焚烧的良好实践 |
Characterization of sludges - Good practice for sludges incineration with and without grease and screenings |
| EN ISO 10304-1-1995 |
水质 离子色谱法测定溶解性氟化物、氯化物、亚硝酸盐、亚磷酸盐、溴化物、硝酸盐和硫酸根离子 第1部分： |
Water quality - Determination of dissolved fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions, using liquid chromatography of ions - Part 1: Method for water with low contamination (ISO 10304-1:1992) |
| EN 868-9-2000 |
经消毒的医疗器械用包装材料和系统 第9部分：生产热密封袋、卷轴和盖的聚烯烃非涂层非编织材料 要求和试 |
Packaging materials and systems for medical devices which are to be sterilized - Part 9: Uncoated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids - Requirements and test methods |
| EN 1275-1997 |
化学消毒剂和防腐剂 碱性真菌活性 检验方法和要求(第1阶段) |
Chemical disinfectants and antiseptics - Basic fungicidal activity - Test method and requirements (Phase 1) |
