| 标准号 |
中文名 |
英文名 |
| DIN EN 302092-2-2000 |
宽带综合业务数字网(B-ISDN)和宽带专用综合业务网(PSTNS).数字用户用2号信令系统.宽带内部交换信令(B-QSIG) |
Broadband Integrated Services Digital Network (B-ISDN) and Broadband Private Integrated Services Network (B-PISN) - Digital Subscriber Signalling System No. two (DSS2); Broadband Inter-Exchange Signalling (B-QSIG) and Signalling System No. 7 (SS7); Preneg |
| DIN ISO 8909-1-2000 |
农机和拖拉机.饲料收割机.第1部分:词汇 |
Agricultural machinery and tractors - Forage harvesters - Part 1: Vocabulary (ISO 8909-1:1994) |
| DIN ISO 8909-2-2000 |
农机和拖拉机.饲料收割机.第2部分:特性和性能规范 |
Agricultural machinery and tractors - Forage harvesters - Part 2: Specification of characteristics and performance (ISO 8909-2:1994) |
| DIN EN 13117-2-2000 |
运输包装.可重复使用的硬塑料配送箱.第2部分:试验的通用规范 |
Transport packaging - Reusable, rigid plastics distribution boxes - Part 2: General specifications for testing; German version EN 13117-2:2000 |
| DIN EN 13117-1-2000 |
运输包装.可重复使用硬塑料配送箱.第1部分:通用配送箱 |
Transport packaging - Reusable, rigid plastics distribution boxes - Part 1: General purpose application; German version EN 13117-1:2000 |
| DIN 743-1-2000 |
轴类.负载能力的计算.第1部分:一般基础 |
Shafts and axles, calculation of load capacity - Part 1: General basics |
| DIN EN 12663-2000 |
铁路设施.铁路车辆车身的结构要求 |
Railway applications - Structural requirements of railway vehicle bodies; German version EN 12663:2000 |
| DIN EN 12715-2000 |
特殊土工工程施工.灰浆 |
Execution of special geotechnical work - Grouting; German version EN 12715:2000 |
| DIN EN 13191-1-2000 |
清淡食物.溴化物残留物的测定,第1部分:作为无机溴化物的总溴化物含量的测定 |
Non-fatty foods - Determination of bromide residues - Part 1: Determination of total bromide as inorganic bromide; German version EN 13191-1:2000 |
| DIN EN 13191-2-2000 |
清淡食物.溴化物残留物的测定,第2部分:无机溴化物含量的测定 |
Non-fatty foods - Determination of bromide residues - Part 2: Determination of inorganic bromide; German version EN 13191-2:2000 |
| DIN EN ISO 14744-6-2000 |
焊接.电子束焊接机验收检验.第6部分:焊点位置稳定性的测量 |
Welding - Acceptance inspection of electron beam welding machines - Part 6: Measurement of stability of spot position (ISO 14744-6:2000); German version EN ISO 14744-6:2000 |
| DIN 19661-2-2000 |
水工结构.指南.第2部分:河床保护结构.跌水构筑物、陡槽、梯流和潜坝 |
Hydraulic structures - Guidelines - Part 2: River bottom protection structures; drop structures, chutes, cascades, sills |
| DIN EN ISO 11469-2000 |
塑料.塑料产品通用标识和标记 |
Plastics - Generic identification and marking of plastics products (ISO 11469:2000); German version EN ISO 11469:2000 |
| DIN EN ISO 13943-2000 |
防火安全.术语 |
Fire safety - Vocabulary (ISO 13943:2000); Trilingual version EN ISO 13943:2000 |
| DIN EN ISO 15087-2-2000 |
牙科起子.第2部分:沃里克·吉姆斯起子 (ISO 15087-2:2000); 德文版本 EN ISO 15087-2:2000 |
Dental elevators - Part 2: Warwick James elevators (ISO 15087-2:2000); German version EN ISO 15087-2:2000 |
| DIN EN ISO 15087-3-2000 |
牙科起子.第3部分:格雷尔(Cryer)起子 (ISO 15087-3:2000); 德文版本 EN ISO 15087-3:2000 |
Dental elevators - Part 3: Cryer elevators (ISO 15087-3:2000); German version EN ISO 15087-3:2000 |
| DIN EN 1711-2000 |
焊接的无损检测.通过多平面分析进行焊接涡流检验 |
Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis; German version EN 1711:2000 |
| DIN EN 12544-2-2000 |
无损试验.X射线管电压的评估和测量.第2部分:用厚滤膜法稳定性检验.德文版本EN 12544-2:2000 |
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method; German version EN 12544-2:2000 |
| DIN EN 50241-2-2000 |
易燃或有毒气体和蒸汽气检测用开路仪器规范.第3部分:易燃气体检测仪器性能要求 |
Specification for open path apparatus for the detection of combustible or toxic gases - Part 2: Performance requirements for apparatus for the detection of combustible gases; German version EN 50241-2:1999 |
| DIN EN 13008-2000 |
钢桶.标称容量为15升至62升的活动桶盖(开放端)的桶 |
Steel drums - Removable head (open head) drums with a nominal capacity of 15 l to 62 l; German version EN 13008:1999 |
| DIN 2000-2000 |
饮用水集中供给.对饮用水和饮用水工厂计划、建造、使用、维修要求的指南.DVGW的技术规则 |
Central drinking water supply - Guide lines regarding requirements for drinking water, planning, construction, operation and maintenance of plants - Technical rule of the DVGW |
| DIN EN 60244-1-2000 |
无线电发射机测量方法.第1部分:广播发射机一般特性 |
Methods of measurement for radio transmitters - Part 1: General characteristics for broadcast transmitters (IEC 60244-1:1999); German version EN 60244-1:2000 |
| DIN EN 300645-2000 |
电信管理网络(TMN).同步数字系列(SDH)无线电中继设备.Q接口用信息模式 |
Telecommunications Management Network (TMN) - Synchronous Digital Hierachy (SDH) radio relay equipment - Information model for use on Q interface (Endorsement of the English version EN 300645 V 1.2.1 (1998-10) as German standard) |
| DIN EN 1288-4-2000 |
建筑物玻璃.玻璃弯曲强度测定.第4部分:U型玻璃试验 |
Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass; German version EN 1288-4:2000 |
| DIN EN 301001-4-2000 |
综合业务数字网(ISDN).呼出携带辅助服务.数字用户用1号信令系统协议.第4部分:用户用抽象试验组(ATS)和测试 |
Integrated Services Digital Network (ISDN) - Outgoing Call Bearing (OCB) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol - Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Test |
| DIN EN 301001-6-2000 |
综合业务数字网(ISDN).出网呼叫定方位补充业务.数字用户用1号信令系统协议.第6部分:测试网络形式规范用抽象 |
Integrated Services Digital Network (ISDN) - Outgoing Call Bearing (OCB) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol - Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Test |
| DIN ISO 4531-1-2000 |
釉瓷和搪瓷.与食物接触的搪瓷器皿铅和镉的释放 |
Vitreous and porcelain enamels - Release of lead and cadmium from enamelled ware in contact with food - Part 1: Method of test (ISO 4531-1:1998) |
| DIN EN 13007-2000 |
钢桶.标称容量为20升至60升的非活动桶盖(封闭端)的桶 |
Steel drums - Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l; German version EN 13007:1999 |
| DIN VDE 0834-2-2000 |
医院.疗养院和类似场所中的呼叫系统.第2部分:环境条件和电磁兼容性 |
Call systems in hospitals, nursing homes and similar institutions - Part 2: Environmental conditions and electromagnetic compatibility |
| DIN EN 12814-2-2000 |
热塑性塑料半成品的焊接接头试验.第2部分:拉伸试验.德文版本EN 12814-2:2000 |
Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test; German version EN 12814-2:2000 |
| DIN EN 868-9-2000 |
要消毒的医疗装置系统和包装材料.第9部分:用于生产可热密封的袋,卷轴和盖子的聚烯烃未涂覆非织物材料.要求 |
Packaging materials and systems for medical devices which are to be sterilized - Part 9: Uncoated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids; requirements and tests methods; German version EN 868 |
| DIN EN ISO 9454-2-2000 |
软钎焊剂.分类和要求.第2部分:性能要求 |
Soft soldering fluxes - Classification and requirements - Part 2: Performance requirements (ISO 9454-2:1998); German version EN ISO 9454-2:2000 |
| DIN EN 301065-3-2000 |
综合业务数字网(ISDN).无应答呼叫完成(CCNR)补充业务.数字用户信用1号令系统(DSS1)协议.第3部分:用户用试验 |
Integrated Services Digital Network (ISDN) - Completion of Calls on No Reply (CCNR) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol - Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user (E |
| DIN ISO 1012-2000 |
摄影.普通用的胶片和胶卷.尺寸 |
Photography - Film in sheets and rolls for general use - Dimensions (ISO 1012:1998) |
| DIN EN 1736-2000 |
制冷系统和热泵.软管元件、隔振器和膨胀节.要求、设计和安装 |
Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation; German version EN 1736:2000 |
| DIN EN 1834-1-2000 |
往复式内燃机.潜在爆炸性环境用发动机设计和结构安全性要求.第1部分:可燃气体和蒸汽环境用II组发动机 |
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres; German version EN 1834-1:2000 |
| DIN EN ISO 683-17-2000 |
热处理钢、合金钢和易切钢.第17部分:滚球和滚柱轴承钢 |
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:1999); German version EN ISO 683-17:1999 |
| DIN EN 10246-8-2000 |
钢管的无损试验.第8部分:电焊钢管焊缝径向缺陷探测的自动超声波试验 |
Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections; German version EN 10246-8:1999 |
| DIN EN 12707-2000 |
塑料桶.标称容量为210L,220L和225L的非活动桶盖(封闭端)的桶.德文版本EN 12709-1999 |
Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l, 220 l and 225 l; German version EN 12707:1999 |
| DIN EN 13562-2000 |
土工织物和相关产品.耐水渗透性测定 |
Geotextiles and geotextile-related products - Determination of resistance to penetration by water (hydraulic pressure test); German version EN 13562:2000 |
| DIN EN 300497-6-2000 |
数字增强无线远程通信(DECT).通用接口(CI).试验实例库(TCL).第6部分:试验序列结构(TSS)和试验目的(TP);网络 |
Digital Enhanced Cordless Telecommunications (DECT) - Common Interface (CI); Test Case Library (TCL) - Part 6: Test Suite Structure (TSS) and Test Purposes (TP), Network (NWK) layer; Portable radio Termination (PT) (Endorsement of the English version EN 3 |
| DIN 51869-2000 |
气体燃料和其它气体检验.用Karl-Fischer法测定水含量.库仑测量法 |
Testing of gaseous fuels and other gases - Determination of water content according to Karl Fischer - coulometric method |
| DIN V 55394-1-2000 |
实验室比较熟练检验.第1部分:实验室熟练检验方法的制定及运用 |
Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes (ISO/IEC Guide 43-1:1997) |
| DIN V 55394-2-2000 |
用实验室间比较法进行熟练检验.第2部分:实验室认证机构对实验室熟练检验方法的选择及运用 |
Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies (ISO/IEC Guide 43-2:1997) |
| DIN 25482-2 Bb.1-2000 |
电离辐射测量的检测极限和判断域.第2部分:不考虑试样处理影响的分光光度测量法计数测量.说明和示例 |
Detection limit and decision threshold for ionizing radiation measurements - Part 2: Counting measurements by spectrometry, neglecting the influence of sample treatment; comments and examples |
| DIN EN ISO 9455-10-2000 |
软钎焊剂.试验方法.第10部分:助熔剂功效试验.钎料铺展性试验 |
Soft soldering fluxes - Test methods - Part 10: Flux efficacy tests, solder spread method (ISO 9455-10:1998); German version EN ISO 9455-10:2000 |
| DIN ISO 6690 Bb.1-2000 |
农用机械.挤奶装置.机械试验.大型安装说明 |
Agricultural machinery - Milking installations - Mechanical tests; informations on large sized installations |
| DIN EN 12823-1-2000 |
食品.高效液相色谱法测定维生素A.第1部分:13视黄醇和全反视黄醇含量测定 |
Foodstuffs - Determination of vitamin A by high performance liquid chromatography - Part 1: Measurement of all-trans-retinol and 13-cis-retinol; German version EN 12823-1:2000 |
| DIN EN 300462-5-1-2000 |
传输和多路复用.同步网络的一般要求.第5-1部分:同步数字体系(SDH)设备适用的从属时钟的计时特性 |
Transmission and Multiplexing (TM) - Generic requirements for synchronization networks - Part 5-1: Timing characteristics of slave clocks suitable for operation in Synchronous Digital Hierarchy (SDH) equipment (Endorsement of the English version EN 300462 |
| DIN EN ISO 9873-2000 |
牙科用手持器械.可重复使用的牙科镜和手柄:德文版本 EN ISO 9873:2000 |
Dental hand instruments - Reusable mirrors and handles (ISO 9873:1998); German version EN ISO 9873:2000 |
| DIN EN 1612-2-2000 |
橡胶和塑料机械.反应性制模机械.第2部分:反应性制模设备的安全要求 |
Rubber and plastics machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant; German version of EN 1612-2:2000 |
| DIN V ENV 13696-2000 |
木地板和镶木地板.弹性和耐磨损性的测定 |
Wood and parquet flooring - Determination of elasticity and resistance to wear; German version ENV 13696:2000 |
| DIN EN 61169-31-2000 |
射频连接器.第31部分:外导体内径为1,0mm(0,039in)的螺纹连接射频同轴连接器.特性阻抗50欧姆(1,0型) |
Radio-frequency connectors - Part 31: RF coaxial connectors with inner diameter of outer conductor 1,0 mm (0,039 in) with screw coupling; characteristic impedance 50 ohms (type 1,0) (IEC 61169-31:1999); German version EN 61169-31:1999 |
| DIN EN 10246-18-2000 |
钢管的无损检验.第18部分:层状缺陷检测用无缝和焊接铁磁钢管管端的磁力探伤 |
Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of the tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections; German version EN 10246-18:2000 |
| DIN EN ISO 14744-1-2000 |
焊接.电子束焊接机的验收检验.第1部分:规则和验收条件 |
Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2000); German version EN ISO 14744-1:2000 |
| DIN EN 12678-2000 |
饮用水处理用化学品.过氧单硫酸钾 |
Chemicals used for treatment of water intended for human consumption - Potassium peroxomonosulfate; German version EN 12678:2000 |
| DIN EN 12732-2000 |
燃气供应系统.焊接钢管.功能要求 |
Gas supply systems - Welding steel pipework - Functional requirements; German version EN 12732:2000 |
| DIN EN 12876-2000 |
饮用水处理用化学品.氧 |
Chemicals used for treatment of water intended for human consumption - Oxygen; German version EN 12876:2000 |
| DIN EN 12931-2000 |
饮用水处理用化学品.应急化学品.无水二氯异氰脲酸钠 |
Chemicals used for treatment of water intended for human consumption - Chemical for emergency use - Sodium dichloroisocyanurate, anhydrous; German version EN 12931:2000 |
| DIN 8959-2000 |
食品绝热运输工具.要求和试验 |
Insulated food carriers - Requirements and testing |
| DIN 25403-3-2000 |
处理和搬运核燃料时的临界安全性.第3部分:钚239金属-轻水混合物的临界数据 |
Criticality safety in processing and handling fissile materials - Part 3: Criticality data for plutonium 239 metal light-water-mixtures |
| DIN EN ISO 105-Z06-2000 |
纺织品.色牢度试验.第Z06部分:染料和颜料褪色评定 |
Textiles - Tests for colour fastness - Part Z06: Evaluation of dye and pigment migration (ISO 105-Z06:1998); German Version EN ISO 105-Z06:2000 |
| DIN 33892-2-2000 |
技术设备的粉尘排放.气载危险物质的排放估算.第2部分:试验台法测定手动电木工机械的污染物浓度参数 |
Dust emission of technical equipment - Evaluation of the emission of airborne hazardous substances - Part 2: Determination of the pollutant concentration parameter, test bench method, handheld electrical wood working machines |
| DIN 62136-1-2000 |
纺织机械和附件.纬编独立针织机用针和沉降片润滑油.第1部分:矿物油基润滑油的最低要求 |
Textile machinery and accessories - Needle and sinker lubricating oils for weft knitting independent needle machines - Part 1: Minimum requirements of mineral oil based |
| DIN 62136-1 Bb.1-2000 |
纺织机械和附件.纬编独立针织机用针和沉降片润滑油.第1部分:矿物油基润滑油的最低要求.塑料制机械零件耐针 |
Textile machinery and accessories - Needle and sinker lubricating oils for weft knitting independent needle machines - Part 1: Minimum requirements of mineral oil based; examples for resistance of machine parts made from plastics against needle and sinker |
| DIN 86127-2000 |
舰船用压缩式接头.米制螺纹24级接头.技术规范 |
Compression fittings for shipboard use - 24 fittings with metric thread - Technical specification |
| DIN 86201-2000 |
船上消防设施的国际海岸连接用连接件.公称压力16 |
Fittings for international shore connection of fire extinguishing installations on ships - Nominal pressure 16 |
| DIN EN 60317-48-2000 |
特种绕组线规范.第48部分:温度指数155的玻璃纤维缠绕树脂或清漆浸渍裸圆铜线或漆包圆铜线 |
Specification for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 (IEC 60317-48:1999); German version EN 60317-48:2000 |
| DIN EN ISO 7980-2000 |
水质.钙和镁的测定.原子吸收光谱测定法 |
Water quality - Determination of calcium and magnesium - Atomic absorption spectrometric method (ISO 7980:1986); German version EN ISO 7980:2000 |
| DIN EN 61023-2000 |
海上导航和无线电通信设备及系统.航海速度和距离的测量设备(SDME)性能要求.测试方法和要求的试验结果 |
Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment (SDME) - Performance requirements; methods of testing and required test results (IEC 61023:1999); German version EN 61023:1999 |
| DIN EN 1928-2000 |
防水软板.屋顶防水用沥青、塑料和橡胶薄板.水密性测定 |
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness; German version EN 1928:2000 |
| DIN EN 13196-2000 |
果汁和蔬菜汁.蒸馏法测定二氧化硫总含量 |
Fruit and vegetable juices - Determination of total sulfur dioxide by destillation; German version EN 13196:2000 |
| DIN 81834-2000 |
锚定设备元部件.术语和定义 |
Components for anchoring equipment - Terms and definitions |
| DIN EN 1987-3-2000 |
电动道路车辆.安全性特殊要求.第3部分:乘客电危害防护 |
Electrically propelled road vehicles - Specific requirements for safety - Part 3: Protection of users against electrical hazards; German version EN 1987-3:1998 |
| DIN EN ISO 14554-2-2000 |
焊接质量要求.金属材料的电阻焊接.第2部分:基本质量要求 |
Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements (ISO 14554-2:2000); German version EN ISO 14554-2:2000 |
| DIN EN 1069-2-2000 |
2米高及以上的水滑道.第2部分:说明 |
Water slides of 2 m height and more - Part 2: Instructions; German version EN 1069-2:1999 |
| DIN EN 1121-2000 |
门.两种不同气候间的状态.试验方法 |
Doors - Behaviour between two different climates - Test method; German version EN 1121:2000 |
| DIN EN 1822-4-2001 |
高效空气颗粒物过滤器(HEPA和ULPA).第4部分:过滤器元件泄漏的测定(扫描法) |
High efficiency particulate air filters (HEPA and ULPA) - Part 4: Determining leakage of filter elements (Scan method); German version EN 1822-4:2000 |
| DIN 25403-5-2000 |
处理和搬运核燃料时的临界安全性.第5部分:239二氧化钚-轻水混合物的临界数据 |
Criticality safety in processing and handling fissile materials - Part 5: Criticality data for plutonium 239 dioxide light-water-mixtures |
| DIN 25483-2000 |
使用累计固体剂量计的环境监测法 |
Methods of environmental monitoring using integrating solid-state dosimeters |
| DIN EN 1288-5-2000 |
建筑物玻璃.玻璃弯曲强度测定.第5部分:平板玻璃试样表面小面积同轴双环试验 |
Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas; German version EN 1288-5:2000 |
| DIN EN 12164-2000 |
铜和铜合金.高速切削用棒材(包括修改件A1: 2000); 德文版本 EN 12164:1998 + A1:2000 |
Copper and copper alloys - Rod for free machining purposes (includes amendment A1:2000); German version EN 12164:1998 + A1:2000 |
| DIN EN 175101-802-2000 |
详细规范.带有3或4行上2.54mm基本格栅的高数值接触点印制电路板用两件式连接器 |
Detail specification - Two-part-connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows; German version EN 175101-802:1999 |
| DIN EN 12933-2000 |
饮用水处理用化学品.应急化学品.三氯异氰脲酸 |
Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Trichloroisocyanuric acide; German version EN 12933:2000 |
| DIN EN 12947-2000 |
灰浸材料.镁含量测定.原子吸收分光光度法 |
Liming materials - Determination of magnesium content - Atomic absorption spectrometric method; German version EN 12947:2000 |
| DIN EN 13087-7-2000 |
防护头盔.试验方法.第7部分:耐火性 |
Protective helmets - Test methods - Part 7: Flame resistance; German version EN 13087-7:2000 |
| DIN V ENV 13606-4-2000 |
医疗保健信息学.电子保健记录信息.第4部分:信息交流用消息 |
Health informatics - Electronic healthcare record communication - Part 4: Messages for the exchange of information; English version ENV 13606-4:2000 |
| DIN 72786-3-2000 |
公路车辆的挡风刮水器系统.弧刷臂.第3部分:刮水器杆材料 |
Windscreen wiper systems for road vehicles - Wiper arm - Part 3: Wiper rod material |
| DIN 74281-1-2000 |
气压制动设备.压力容器.第1部分:钢和铝制焊接单室压力容器的度量方法 |
Air braking systems - Pressure vessels - Part 1: Measures of welded steel and aluminium single chamber pressure vessels |
| DIN 86126-2000 |
船舶用压合接头.公制螺纹24级接头.类型和尺寸 |
Compression fittings for shipboard use - 24° fittings with metric thread - Types and dimensions |
| DIN EN ISO 3098-2-2000 |
技术产品文件.文字.第2部分:拉丁字母、数字和符号 |
Technical product documentation - Lettering - Part 2: Latin alphabet, numerals and marks (ISO 3098-2:2000); German version EN ISO 3098-2:2000 |
| DIN ISO 12884-2000 |
环境空气.总(气相和颗粒物相)多环芳烃的测定.吸附剂吸收色质联机法 |
Ambient air - Determination of total (gas and particle phase) polycyclic aromatic hydrocarbons - Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analysis (ISO 12884:2000) |
| DIN EN 1034-1-2000 |
机械安全.纸制造和整饰机械的设计和结构的安全要求.第1部分:通用要求 |
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements; German version EN 1034-1:2000 |
| DIN EN 1074-4-2000 |
供水用阀门.目的要求适用性和适用验证试验.第4部分:空气阀 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves; German version EN 1074-4:2000 |
| DIN EN ISO 12777-2-2000 |
托盘连接件的试验方法.第2部分:托盘用钉子和U形钉钉头抗拉试验 |
Methods of test for pallet joints - Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples (ISO 12777-2:2000); German Version EN ISO 12777-2:2000 |
| DIN EN 300497-8-2000 |
数字增强无线远程通信(DECT).通用接口(CI).试验实例库(TCL).第8部分:试验序列结构(TSS)和试验目的(TP):固定 |
Digital Enhanced Cordless Telecommunications (DECT) - Common Interface (CI); Test Case Library (TCL) - Part 8: Test Suite Structure (TSS) and Test Purposes (TP); Fixed radio Termination (FT) (Endorsement of the English version ETS 300497-8 V 0.3.2 (1999-0 |
| DIN EN 300462-3-1-2000 |
传输和多路复用(TM).同步网络的一般要求.第3-1部分:同步网络内的图像跳动和飘移的控制 |
Transmission and Multiplexing (TM) - Generic requirements for synchronization networks - Part 3-1: The control of jitter and wander within synchronization networks (Anerkennung der Englischen Fassung EN 300462-3-1 V 1.1.1 (1998-05) als Deutsche Norm) |
| DIN EN 300462-1-1-2000 |
传输和多路复用(TM).同步网络的一般要求.第1-1部分:同步网络的定义和术语 |
Transmission and Multiplexing (TM) - Generic requirements for synchronization networks - Part 1-1: Definitions and terminology for synchronization networks (Endorsement of the English version EN 300462-1-1 V 1.1.1 (1998-05) as German standard) |
| DIN EN 12823-2-2000 |
食品.高效液相色谱法测定维生素A.第3部分:β胡萝卜素含量测定 |
Foodstuffs - Determination of vitamin A by high performance liquid chromatography - Part 2: Measurement of -carotene; German version EN 12823-2:2000 |
| DIN EN 12668-1-2000 |
无损检验.超声波检验设备的品质鉴定和验证.第1部分:仪器 |
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments; German version EN 12668-1:2000 |
| DIN EN 201/A1-2000 |
橡胶和塑料机械.注射成型机.安全要求 |
Rubber and plastics machines - Injection moulding machines - Safety requirements; German version EN 201:1997/A1:2000 |
| DIN EN 50206-2 Berichtigung 1-2000 |
DIN EN 50206-2的技术勘误 |
Corrigendum to DIN EN 50206-2 (VDE 0115 Teil 500-2):1999-09 |
| DIN EN ISO 14554-1-2000 |
焊接质量要求.金属材料的电阻焊接.第1部分:综合质量要求 |
Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2000); German version EN ISO 14554-1:2000 |
| DIN EN ISO 5183-1-2000 |
电阻焊接设备.外锥度1:10电极接头.第1部分:锥度1:10圆锥形接头 |
Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1: Conical fixing, taper 1:10 (ISO 5183-1:1998); German version EN ISO 5183-1:2000 |
| DIN 22109-2-2000 |
煤矿用织物叠层输送带.第2部分:井下用双层橡胶输送带.尺寸.要求 |
Conveyor belts with textile plies for coalmining - Part 2: Rubber-belts with two plies for underground applications; dimensions, requirements |
| DIN EN ISO 1746-2000 |
橡胶或塑料软管和管道.弯曲试验 |
Rubber or plastics hoses and tubing - Bending tests (ISO 1746:1998, including Technical Corrigendum 1:1999); German version EN ISO 1746:2000 |
| DIN EN ISO 3994-2000 |
塑料软管.给排含水物质用螺旋热塑塑料增强的热塑塑料软管.规范 |
Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:1998); German version EN ISO 3994:2000 |
| DIN V 51897-2000 |
气体分析.定义和解释 |
Gas analysis - Definitions and explanations |
| DIN EN 12583-2000 |
供气系统.压缩机泵站.功能要求 |
Gas supply systems - Compressor stations - Functional requirements; German version EN 12583:2000 |
| DIN EN 1870-9-2000 |
木工机械的安全.圆盘锯床.第9部分:集中进料、人工装载和/或无装载的横向切割用双锯片圆盘锯床 |
Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading; German version EN 1870-9:2000 |
| DIN EN 1288-3-2000 |
建筑物用玻璃.玻璃弯曲强度测定.第3部分:(四点弯曲)两点支撑试样试验 |
Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000 |
| DIN EN 1946-5-2000 |
建筑产品和部件热性能.实验室评估热传导性能专用准则.第5部分:管试验测量法 |
Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 5: Measurements by pipe test methods; German version EN 1946-5:2000 |
| DIN EN 12153-2000 |
幕墙.透气率.试验方法 |
Curtain walling - Air permeability - Test methods; German version EN 12153:2000 |
| DIN EN 1594-2000 |
供气系统.最大工作压力大于16巴的管道.功能要求 |
Gas supply systems - Pipelines for maximum operating pressure over 16 bar - Functional requirements; German version EN 1594:2000 |
| DIN 25403-6-2000 |
处理和搬运核燃料时的临界安全性.第6部分:钚239硝酸盐-轻水混合物的临界数据 |
Criticality safety in processing and handling fissile materials - Part 6: Criticality data for plutonium 239 nitrate light-water-mixtures |
| DIN EN 1288-1-2000 |
建筑物玻璃.玻璃弯曲强度测定.第1部分:玻璃试验基本原则 |
Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass; German version EN 1288-1:2000 |
| DIN EN 1288-2-2000 |
建筑物玻璃.玻璃弯曲强度测定.第2部分:平板玻璃试样表面大面积同轴双环试验 |
Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas; German version EN 1288-2:2000 |
| DIN EN 61300-3-2-2000 |
纤维光学互连器件和无源元件.基本试验和测量程序.第3-2部分:检查和测量.单模纤维光学器件衰减偏振函数 |
Fibre optic interconnecting devices and passive components - Basic tests and measurement procedures - Part 3-2: Examinations and measurements; polarization dependence of attenuation in a single-mode fibre optic device (IEC 61300-3-2:1999); German version? |
| DIN V ENV 1401-2-2000 |
非压力地下排水和污水管道用塑料管道系统.硬聚氯乙烯(PVC-U).第2部分:一致性评估指南 |
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for assessment of conformity; German version ENV 1401-2:2000 |
| DIN EN 1516-2000 |
运动场地面.耐压痕性能测定 |
Surfaces for sports areas - Determination of resistance to indentation; German version EN 1516:1999 |
| DIN EN 1569-2000 |
运动场地面.滚动载荷下状态的测定 |
Surfaces for sports areas - Determination of the behaviour under a rolling load; German version EN 1569:1999 |
| DIN EN 175201-804-2000 |
详细规范.圆形连接器.直径为1.6mm的螺纹耦合圆触点 |
Detail specification - Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling; German version EN 17201-804:1999 |
| DIN EN 300001-2000 |
公共交换电话网(PSTN)附件.PSTN模拟用户接口连接设备一般技术要求 |
Attachements to the Public Switched Telephone Network (PSTN) - General technical requirements for equipment connected to an analogue subscriber interface in the PSTN (Endorsement of the English version EN 300001 V 1.5.1 (1998-10) as German Standard) |
| DIN EN 61300-3-33-2000 |
纤维光学互连器件和无源元件.基本试验和测量程序.第3-33部分:套管拔出力 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements; ferrule withdrawal force (IEC 61300-3-33:1999); German version EN 61300-3-33:1999 |
| DIN EN 300185-6-2000 |
综合业务数字网(ISDN).会议电话加入(CONF)补充业务.数字用户信令系统No.1(DSS1)协议.第6部分:网络用抽象测 |
Integrated Services Digital Network (ISDN) - Conference call, add-on (CONF) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol - Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for T |
| DIN EN 300497-9-2000 |
数字增强无线远程通信(DECT).通用接口(CI).试验实例库(TCL).第9部分:网络(NWK)层抽象试验序列(ATS).固定无 |
Digital Enhanced Cordless Telecommunications (DECT) - Common Interface (CI); Test Case Library (TCL) - Part 9: Abstract Test Suite (ATS) for Network (NWK) layer; Fixed radio Termination (FT) (Endorsement of the English version ETS 300497-9 V 0.3.2 (1999-0 |
| DIN EN 60191-3-2000 |
半导体器件的机械标准化.第3部分:集成线路外形图绘制的一般规则 |
Mechanical standardization of semiconductor devices - Part 3: General rules for the preparation of outline drawings of integrated circuits (IEC 60191-3:1999); German version EN 60191-3:1999 |
| DIN EN 301371-1-2000 |
数字增强无线远程通信(DECT).无线终端移动性(CTM).CTM存取协议子集(CAP).协议子集试验规范(PTS).第1部分:摘 |
Digital Enhanced Cordless Telecommunications (DECT) - Cordless Terminal Mobility (CTM); CTM Access Profile (CAP); profile Test Specification (PTS) - Part 1: Summary (Endorsement of the English version EN 301371-1 V 0.0.1 (1999-09) as German standard) |
| DIN 1409-2000 |
高速钢制拉刀.交货技术条件 |
High-speed steel broaching tools - Technical delivery conditions |
| DIN 15565-6-2000 |
电影和电视制作室用配电设备.第6部分:电视转播车用配电箱 |
Electric power-distribution equipment for production workstations for film and television - Part 6: Distribution UeV for television OB-car |
| DIN EN 13319-2000 |
潜水设备附件.深度规和深度及时间组合测量设备.功能和安全要求、试验方法 |
Diving accessories - Depth gauges and combined depth and time measuring devices - Functional and safety requirements, test methods; German version EN 13319:2000 |
| DIN EN ISO 3248-2000 |
色漆和清漆.热效应的测定 |
Paints and varnishes - Determination of the effect of heat (ISO 3248:1998); German version EN ISO 3248:2000 |
| DIN EN ISO 4671-2000 |
橡胶和塑料软管及软管组件.尺寸测量方法 |
Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions (ISO 4671:1999); German version EN ISO 4671:2000 |
| DIN EN 300368-2000 |
综合业务数字网(ISDN).显式呼叫转接(ECT)补充业务.功能性能力和信息流 |
Integrated Services Digital Network (ISDN) - Explicit Call Transfer (ECT) supplementary service - Functional capabilities and information flows (Endorsement of the English version EN 300368 V 1.2.2 (1998-12) as German standard) |
| DIN EN 1147-2000 |
便携式消防梯 |
Portable ladders for fire service use; German version EN 1147:2000 |
| DIN EN 61300-3-17-2000 |
纤维光学互连器件和无源元件.基本试验和测量程序.第3-17部分:检查和测量.角度抛光套圈的端面角 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-17: Examinations and measurements; endface angle of angle-polished ferrules (IEC 61300-3-17:1999); German version EN 61300-3-17:1999 |
| DIN EN 61754-16-2000 |
纤维光学连接器接口.第16部分:PN型连接器门类 |
Fibre optic connector interfaces - Part 16: Type PN connector family (IEC 61754-16:1999); German version EN 61754-16:2000 |
| DIN 18304-2000 |
建筑工程承包条例.第C部分:建筑工程通用技术规范.打桩工程 |
Contract procedures for building works - Part C: General technical specifications in building works; Pile driving |
| DIN EN 792-12-2001 |
手持非电动工具.安全要求.第12部分:往复式小圆盘摆锯式 |
Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws; German version EN 792-12:2000 |
| DIN ETS 300577-2000 |
数字移动电话远程通信系统(阶段2).无线电传输和接收 (英文版本核准本 ETS 300577:1999 作为德国标准) |
Digital cellular telecommunications system (Phase 2) - Radio transmission and reception (Endorsement of the English version ETS 300577:1999 as German standard) |
| DIN 685-4-2001 |
经过检验的圆钢链.第4部分:标记,试验合格证书 |
Round steel link chains, tested - Part 4: Marking, test certificate |
| DIN 32676-2001 |
饮食业、化工业和医药业用管件.不锈钢管卡箍连接.焊接式 |
Fittings for the food, chemical and pharmaceutical industries - Clamp connections for stainless steel tubes - Weld-on type |
| DIN 53856-2001 |
纺织品的检验.经纱和纬纱的加重率的测定 |
Testing of textiles - Determination of the mass portion of warp and weft |
| DIN EN 300416-2000 |
网络标识(NA).国际数字路径路径单元可用度性能 |
Network Aspects (NA) - Availability performance of path elements of international digital paths (Endorsement of the English version EN 300416 V 1.2.1 (1998-08) as German standard) |
| DIN EN 300631-2000 |
固定无线电系统.点对点天线.1GHz至3GHz频带中点对点固定无线电系统用天线 |
Fixed Radio Systems - Point-to-Point-Antennas - Antennas for Point-to-Point fixed radio systems in the 1 GHz to 3 GHz band (Endorsement of the English version EN 300631 V 1.2.1 (1999-12) as German standard) |
| DIN EN 301131-2000 |
综合业务数字网(ISDN).遥控用户终端业务.业务描述 |
Integrated Services Digital Network (ISDN) - Teleaction teleservice - Service description (Endorsement of the English version EN 301131 V 1.1.1 (1999-01) as German standard) |
| DIN EN 301132-2000 |
综合业务数字网(ISDN).电信业务加密工具(SET) |
Integrated Services Digital Network (ISDN) - Security tools (SET) for use within telecommunication services (Endorsement of the English version EN 301132 V 1.1.1 (1998-10) as German standard) |
| DIN EN 301133-2000 |
综合业务数字网(ISDN).选择呼叫转移(SCF)补充业务(无条件、占线和无响应).业务描述 |
Integrated Services Digital Network (ISDN) - Selective Call Forwarding (SCF) supplementary services (unconditional, busy and no reply) - Service description (Endorsement of the English version EN 301133 V 1.1.1 (1998,10) as German standard) |
| DIN 6364-2000 |
带紧定螺纹的莫氏锥柄用7/24外锥柄异径连接套管 |
Reduction sleeves with external taper shank 7/24 for morse taper shank with tightening thread |
| DIN EN 60672-2-2000 |
陶瓷和玻璃绝缘材料-第2部分:试验方法 |
Ceramic and glass insulating materials - Part 2: Methods of test (IEC 60672-2:1999); German version EN 60672-2:2000 |
| DIN ETS 300624-2000 |
数字移动电话远程通信系统(阶段2).移动通信全球系统(GSM)网络管理(NM)程序和基础站控制器(BSC)信息互连 (英 |
Digital cellular telecommunications system (Phase 2) - Interworking of GSM Network Management (NM) procedures and messages at the Base Station Controller (BSC) (Endorsement of the English version ETS 300624:1996 as German standard) |
| DIN ETS 300392-12-13-2000 |
地面主干线广播(TETRA).语音加数据(V+D).第12部分:补充服务3级.第13子部分:占线用户的呼叫结束(CCBS) (英文 |
Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 12: Supplementary services stage 3; Sub-part 13: Call Completion to Busy Subscriber (CCBS) (Endorsement of the English version ETS 300392-12-13:2000 as German standard) |
| DIN EN 61338-1-3-2000 |
波导型介电谐振器.第1-3部分:一般信息和试验条件.微波介电谐振器材料的复相对介电常数的测量方法 |
Waveguide type dielectric resonators - Part 1-3: General information and test conditions; Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency (IEC 61338-1-3:1999); German version EN 61338-1-3:2000 |
| DIN EN 61675-1-2000 |
放射性核素影像装置.性能和试验条件.第1部分:定位放射断层照片 |
Radionuclide imaging devices - Characteristics and test conditions - Part 1: Positron emission tomographs (IEC 61675-1:1998); German version EN 61675-1:1998 |
| DIN 18310-2000 |
建筑工程合同.第C部分:建筑工程通用技术规范.河流、堤坝和海岸沙滩安全防御工程 |
Contracts procedures for buildings works - Part C: General technical specifications for building works; Security works at water, dikes and costal dunes |
| DIN 20004-2-2000 |
矿山用钢管.第2部分:额定压力PN10和PN40的楔形环 |
Steel tubes for mining - Part 2: Wedge rings rated for PN 10 and PN 40 |
| DIN 20004-1-2000 |
矿山用钢管.第1部分:额定压力PN10和PN40的插接环 |
Steel tubes for mining - Part 1: Interpose rings rated for PN 10 and PN 40 |
| DIN 6814-8-2000 |
放射技术领域的概念与定义,第8部分:放射治疗 |
Terms and definitions in the field of radiology - Part 8: Radiotherapy |
| DIN EN 301692-2000 |
无线终端可动性(CTM).阶段2+特征软件包1(FP1).电路交换数据.业务描述 |
Cordless Terminal Mobility (CTM) - Phase 2+ Feature Package 1 (FP1); Circuit-switched data - Service description (Endorsement of the English version EN 301692 V 2.0.2 (2000-05) as German standard) |
| DIN EN 1546-2-2000 |
识别卡系统.内部电子钱包.第2部分:安全结构 |
Identification card systems - Inter-sector electronic purse - Part 2: Security architecture; German version EN 1546-2:1999 |
| DIN EN 1708-2-2000 |
焊接.碱性焊接钢接合详图.第2部分:无内增压的元件 |
Welding - Basic weld joint details in steel - Part 2: Non internal pressurized components; German version EN 1708-2:2000 |
| DIN EN 1919-2000 |
可移动气瓶.液化气(不包括乙炔和液化石油气)用气瓶.填充时的检查 |
Transportable gas cylinders - Cylinders for liquefied gases (excluding acetylene and LPG) - Inspection at time of filling; German version EN 1919:2000 |
| DIN EN 415-2-2000 |
包装机械的安全性.第2部分:预成形刚性容器包装机 |
Safety of packaging machines - Part 2: Pre-formed rigid container packaging machines; German version EN 415-2:1999 |
| DIN EN 60512-6-5-2000 |
电子设备用机电元件.基本试验程序和测量方法.第6部分:动态应力试验.第5节:试验6e.随意振动 |
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6: Dynamic stress tests; section 5: Test 6e: Random vibration (IEC 60512-6-5:1997, modified); German version EN 60512-6-5:1999 |
| DIN EN 12396-3-2000 |
清淡食品.二硫化基甲酸盐和二硫化四烷基秋兰姆残留物测定.第3部分:紫外分光光度法 |
Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 3: UV-spectrometric xanthogenate method; German version EN 12396-3:2000 |
| DIN 15207-1-2000 |
连续式机械输送设备.皮带式输送机用张紧皮带轮.散装物料皮带式输送机用张紧皮带轮的主要尺寸 |
Continuous mechanical handling equipment - Idlers for belt conveyors - Main dimensions of idlers for belt conveyors for bulk material |
| DIN EN 61076-3-2000 |
直流低频模拟和数字高速数据应用的连接器.第3部分:经质量评定的矩形连接器.分规范 |
Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 3: Rectangular connectors with assessed quality; sectional specification (IEC 61076-3:1999); German version EN 61076-3:2000 |
| DIN EN 61076-3-001-2000 |
直流低频模拟和数字高速数据应用的连接器.第3-001部分:经质量评定的矩形连接器.空白详细规范 |
Connectors for use in d.c., low-frequency analogue, and digital high-speed data applications - Part 3-001: Rectangular connectors with assessed quality; blank detail specification (IEC 61076-3-001:1999); German version EN 61076-3-001:2000 |
| DIN EN 60990-2000 |
接触电流和保护导体电流的测量方法 |
Methods of measurement of touch current and protective conductor current (IEC 60990:1999); German version EN 60990:1999 |
| DIN EN 61076-3-100-2000 |
直流低频模拟和数字高速数据装置连接器.第3100部分:经质量评定的矩形接插件. 梯形壳体1,27MM双列非移动带状 |
Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality; detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removabl |
| DIN EN 61834-3-2000 |
录音.用户用(525-60、625-50、1125-60和1250-50系统)6.35mm磁带的螺旋扫描数字视频盒式录音系统.第3部分:11 |
Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 3: HD format for 1125-60 and 1250-50 systems (IEC 61834-3:1999); German version EN 61834-3:2 |
| DIN EN 60938-2-2-2000 |
抑制电磁干扰用固定电感器.第2-2部分:空白详细规范.仅要求做安全试验的电感器 |
Fixed inductors for electromagnetic interference suppression - Part 2-2: Blank detail specification, inductors for which safety tests are required (only) (IEC 60938-2-2:1999); German version EN 60938-2-2:1999 |
| DIN EN 300745-4-2000 |
综合业务数字网(ISDN).消息等待指示(MWI)补充业务.数字用户用1号信令系统(DSS1)协议.第4部分:用户用抽象试 |
Integrated Services Digital Network (ISDN); Message Waiting Indication (MWI) supplementary service - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for |
| DIN EN 300745-6-2000 |
综合业务数字网(ISDN).消息等待指示(MWI)补充业务.数字用户用1号信令系统(DSS1)协议.第6部分:网络用抽象试 |
Integrated Services Digital Network (ISDN) - Message Waiting Indication (MWI) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol - Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for |
| DIN ETS 300612-1-2000 |
数字移动电话远程通信系统(阶段2).网络管理(NM).第1部分:网络管理的目标和结构 (英文版本核准本 ETS 300612 |
Digital cellular telecommunications system (Phase 2) - Network Management (NM) - Part 1: Objectives and structure of Network Management (Endorsement of the English version ETS 300612-1:1996 as German standard) |
| DIN EN 1877-2-2000 |
混凝土结构保护和维修用产品和系统.试验方法.与环氧树脂相关的活性成分.第2部分:通过总碱值测定氨成分 |
Products and systems for the protection and repair of concrete structures - Test methods; Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number; German version EN 1877-2:2000 |
| DIN EN 60317-35-2000 |
特种绕组线规范.第35部分:155级带粘结层的可焊接聚氨酯漆包圆铜线 |
Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer (IEC 60317-35:1992 + A1:1997 + A2:1999); German version EN 60317-35:1994 + A1:1998 + A2:2000 |
| DIN EN 60317-36-2000 |
特种绕组线规范.第36部分:180级带粘结层的可焊接聚酰胺酯漆包圆铜线 |
Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer (IEC 60317-36:1992 + A1:1997 + A2:1999); German version EN 60317-36:1994 + A1:1998 + A2:2000 |
| DIN EN 60774-2-2000 |
VHS型12.65mm(0.5in)磁带螺旋扫描盒式录像系统;第2部分:FM声频记录 |
Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - Part 2: FM audio recording (IEC 60774-2:1999); German version EN 60774-2:2000 |
| DIN EN 13199-2-2000 |
包装.小型货物的载运系统.第2部分:柱形堆朵法 |
Packaging - Small Load Carrier Systems - Part 2: Column Stackable System (CSS); German version EN 13199-2:2000 |
| DIN EN 13199-3-2000 |
包装.低负重载运系统.第3部分:联结式叠架 |
Packaging - Small Load Carrier Systems - Part 3: Bond Stackable System (BSS); German version EN 13199-3:2000 |
| DIN EN 13281-2000 |
内河航行船舶.水道和作业场所安全要求 |
Inland navigation vessels - Safety requirements for walkways and working places; German version EN 13281:2000 |
| DIN EN 45544-1-2000 |
工作场所空气.有毒气体和蒸气的直接浓度测量和直接检测用的电气装置.第1部分:一般要求和试验方法 |
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods; German version EN 45544-1:1999 |
| DIN 6141-2000 |
包装材料.纤维板带盖桶.钢制的底和盖 |
Packaging - Fibreboard drums - Bottom and lid made of steel |
| DIN 6780-2000 |
技术制图.孔的简化画法和尺寸标注 |
Technical drawings - Simplified representation and dimensioning of holes |
| DIN EN 12570-2000 |
工业阀门.操作元件尺寸控制方法 |
Industrial valves - Method for sizing the operating element; German version EN 12570:2000 |
| DIN EN 45544-2-2000 |
工作场所空气.有毒气体和蒸气的直接浓度测量和直接检测用的电气装置.第2部分:在限制值范围内用于测量浓度的 |
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for measuring concentrations in the region of limit values; Ge |
| DIN EN 45544-3-2000 |
工作场所空气.有毒气体和蒸气的直接浓度测量和直接检测用的电气装置.第3部分:在限制值之上用于测量浓度的装 |
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3: Performance requirements for apparatus used for measuring concentrations well above limit values; German v |
| DIN 10967-2-2000 |
感官分析.外形调查.第2部分:一致外形 |
Sensory analysis - Investigation of profiles - Part 2: Consensus profile |
| DIN 743 Bb.1-2000 |
轴类.负载能力的计算.样品 |
Shafts and axles, calculation of load capacity - Examples |
| DIN EN 50332-1-2000 |
音响系统设备:与便携音响设备相关的头戴式耳机和耳机.最大声压水平测量方法和限制条件.第1部分:“一包设备 |
Sound system equipment: Headphones and earphones associated with portable audio equipment - Maximum sound pressure level measurement methodology and limit considerations - Part 1: General method for "one package equipment"; German version EN 50332-1:2000 |
| DIN EN 60244-15-2000 |
无线电发射机的测量方法.第15部分:声音广播用调幅发射机 |
Methods of measurement for radio transmitters - Part 15: Amplitude-modulated transmitters for sound broadcasting (IEC 60244-15:1999); German version EN 60244-15:2000 |
| DIN EN 60317-2-2000 |
特种绕组线规范.第2部分:130级有粘结层的可焊接聚氨酯漆包圆铜线 |
Specifications for particular types of winding wires - Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer (IEC 60317-2:1990 + A1:1997 + A2:1999); German version EN 60317-2:1994 + A1:1998 + A2:2000 |
| DIN EN 60999-1-2000 |
连接装置.铜导线.螺钉式和非螺钉式夹紧装置安全性要求.第1部分:0.2mm以上至35mm(含35mm)导线 |
Connecting devices - Electrical copper conductors; Safety requirements for screw-type and screwless-type clamping units - Part 1:General requirements and particular requirements for clamping units for conductors 0,2 mm up to 35 mm (included) (IEC 60999-1: |
| DIN EN 60317-20-2000 |
特种绕组线规范.第20部分:155级可焊接聚氨酯漆包圆铜线 |
Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155 (IEC 60317-20:1990 + A1:1997 + A2:1999); German version EN 60317-20:1995 + A1:1998 + A2:2000 |
| DIN EN 60317-21-2000 |
特种绕组线规范.第21部分:155级聚酰胺包敷可焊接聚氨酯漆包圆铜线 |
Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155 (IEC 60317-21:1990 + A1:1997 + A2:1999); German version EN 60317-21:1995 + A1:1998 + A2:2000 |
| DIN EN 60317-23-2000 |
特种绕组线规范.第23部分:180级可焊接聚酰亚胺漆包圆铜线 |
Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180 (IEC 60317-23:1990 + A1:1997 + A2:1999); German version EN 60317-23:1995 + A1:1998 + A2:2000 |
| DIN EN 508-2-2000 |
金属薄板屋面制品.钢、铝或不锈钢薄板制半支撑屋面制品规范.第2部分:铝 |
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium; German version EN 508-2:2000 |
| DIN EN 12046-2-2000 |
操纵力.试验方法.第2部分:门 |
Operating forces - Test method - Part 2: Doors; German version EN 12046-2:2000 |
| DIN EN 300771-6-2000 |
宽带综合业务数字网(B-ISDN).数字用户用2号信令系统(DSS2)协议.点对多点呼叫/承载控制用B-ISDN用户网络接口 |
Broadband Integrated Service Digital Network (B-ISDN) - Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user network interface layer 3 specification for point-to-multipoint call/bearer control - Part 6: Abstract Test Suite (ATS) and p |
| DIN EN ISO 9241-14-2000 |
办公用视觉显示终端(VDTs)的人类工效学要求.第14部分:菜单对话 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 14: Menu dialogues (ISO 9241-14:1997); German version EN ISO 9241-14:1999 |
| DIN EN 60335-2-64-2001 |
家用和类似电器安全性.第2-64部分:商用电炊具特殊要求 |
Safety of household and similar electrical appliances - Part 2-64: Particular requirements for commercial electric kitchen machines (IEC 60335-2-64:1997, modified); German version EN 60335-2-64:2000 |
| DIN EN ISO 662-2001 |
动植物脂肪和油脂.水分和挥发物含量测定 |
Animal and vegetable fats and oils - Determination of moisture and volatile matter content (ISO 662:1998); German version EN ISO 662:2000 |
| DIN EN ISO 1874-1-2001 |
塑料.注塑和挤塑用聚酰胺(PA)模塑材料.第1部分:命名 |
Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation (ISO 1874-1:1992); German version EN ISO 1874-1:2000 |
| DIN EN ISO 9396-2001 |
塑料.酚醛树脂.用自动装置在规定条件下对酚醛树脂胶凝时间的测定 |
Plastics - Phenolic resins - Determination of the gel time of resols under specific conditions using automatic apparatus (ISO 9396:1997); German version EN ISO 9396:2000 |
| DIN 58124-2001 |
有背带的书包.要求和试验 |
Satchels - Requirements and testing |
| DIN 22022-5-2001 |
固体燃料.痕量元素含量的测定.第5部分:电热雾化法的原子吸收分光光度测定法 |
Solid fuels - Determination of trace elements - Part 5: Atomic absorption spectrometry applying the electrothermal atomization |
| DIN 267-30-2001 |
紧固件.交货技术条件.第30部分:特性等级为10.9的米制滚丝螺钉 |
Fasteners - Technical delivery conditions - Part 30: Metric thread rolling screws of property class 10.9 |
| DIN 18865-4-2001 |
商用厨房设备.食品销售设备.第4部分:加热或不加热顶架 |
Equipment for commercial kitchens - Food distribution equipment - Part 4: Top shelves heated or not heated |
| DIN EN 12453-2001 |
工业、商用和车库门和大门.动力门使用安全性.要求 |
Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements; German version EN 12453:2000 |
| DIN EN 60317-19-2000 |
特种绕组线规范.第19部分:130级聚酰胺包敷可焊接聚氨酯漆包圆铜线 |
Specifications for particular types of winding wires - Part 19: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130 (IEC 60317-19:1990 + A1:1997 + A2:1999); German version EN 60317-19:1995 + A1:1998 + A2:2000 |
| DIN EN 60317-27-2000 |
特种绕组线规范.第27部分:纸包扁铜线 |
Specifications for particular types of winding wires - Part 27: Paper type covered rectangular copper wire (IEC 60317-27:1998 + A1:1999); German version EN 60317-27:1998 + A1:2000 |
| DIN EN ISO 8249-2000 |
焊接.奥氏体和双重铁素体-奥氏体铬镍(Cr-Ni)不锈钢焊接金属中铁素体数(FN)的测定 |
Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2000); German version EN ISO 8249:2000 |
| DIN EN 13432-2000 |
包装.通过合成和生物降解评定包装可回收性的要求.试验计划和包装最后验收标准的评定 |
Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging; German version EN 13432:2000 |
| DIN EN 301060-4-2000 |
综合业务数字网(ISDN).数字用户用1号信令系统(DSS1)协议.基本呼叫控制.虚拟专网(VPN)用"b"业务入口点的增强 |
Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No. one (DSS1) protocol; Basic call control; enhancement at the "b" service entry point for Virtual Private Network (VPN) applications - Part 4: Abstract Test Suite (ATS) an |
| DIN EN 12373-12-2000 |
铝及铝合金.阳极化处理.第12部分:用积算球光度表测量铝表面的反射特性 |
Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments; German version EN 12373-12:2000 |
| DIN EN 301061-6-2000 |
综合业务数字网(ISDN).数字用户用1号信令系统(DSS1)协议.虚拟专用网络(VPN)用的b业务入口点支持补充业务的 |
Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No. one (DSS1) protocol - Generic functional protocol for the support of supplementary services at the "b" service entry point for Virtual Private Network (VPN) applications |
| DIN EN 12428-2000 |
工业、商用和车库门和大门.热传导系数.计算要求 |
Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for the calculation; German version EN 12428:2000 |
| DIN 26051-2-2001 |
油槽车和运输车辆的数据接口.第2部分:协议数据 |
Data Interface for tank trucks and transport vehicles - Part 2: Protocol-Data |
| DIN EN 583-5-2001 |
无损检验.超声波检验.第5部分:不连续性特性和尺寸确定 |
Non-destructive testing - Ultrasonic examination - Part 5: Characterization and sizing of discontinuities; German version EN 583-5:2000 |
| DIN 18384-2000 |
建筑工程承包条例.第C部分:建筑工程通用技术规范.避雷设备 |
Contract procedure for building works - Part C: General technical specifications for building works; Lightning protection systems |
| DIN EN ISO 8330-2000 |
橡胶和塑料软管和软管组件.词汇 |
Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:1998); German version EN ISO 8330:2000 |
| DIN EN ISO 13846-2001 |
塑料管道系统.热塑承压管用端部荷载轴承和无端部荷载轴承组件和连接件.测定水内压长期密封性的试验方法 |
Plastic piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure (ISO 13846:2000); German version EN ISO 13846:2000 |
| DIN EN ISO 105-Z11-2001 |
纺织品.色牢度试验.第Z11部分:染色剂分散斑点评定 |
Textiles - Tests for colour fastness - Part Z11: Evaluation of speckiness of colorant dispersions (ISO 105-Z11:1998); German version EN ISO 105-Z11:2000 |
| DIN EN 301061-4-2000 |
综合业务数字网(ISDN).数字用户用1号信令系统(DSS1)协议.虚拟专用网络(VPN)用的b业务入口点支持补充业务的 |
Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No. one (DSS1) protocol - Generic functional protocol for the support of supplementary services at the "b" service entry point for Virtual Private Network (VPN) applications |
| DIN EN ISO 9439-2000 |
水质.水介质中有机化合物最终有氧生物降解能力的评价.二氧化碳变化试验 |
Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Carbon dioxide evolution test (ISO 9439:1999); German version EN ISO 9439:2000 |
| DIN EN ISO 9653-2000 |
胶粘剂.粘合件剪切冲击强度的试验方法 |
Adhesives - Test method for shear impact strength of adhesive bonds (ISO 9653:1998); German version EN ISO 9653:2000 |
| DIN EN 12330-2000 |
金属腐蚀防护 .钢铁上的镉电镀层 |
Corrosion protection of metals - Electrodeposited coatings of cadmium iron or steel; German version EN 12330:2000 |
| DIN EN 12354-2-2000 |
建筑声学.根据元件性能评估建筑物声学性能.第2部分:房间冲击声隔绝 |
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms; German version EN 12354-2:2000 |
| DIN EN 300061-6-2000 |
综合业务数字网(ISDN).子访问(SUB)补充业务.数字用户信令系统No.1(DSS1)协议.第6部分:网络用抽象测试套(ATS |
Integrated Services Digital Network (ISDN) - Subaddressing (SUB) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol - Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIX |
| DIN EN 60938-1-2000 |
电磁干扰抑制用固定电感器.第1部分:总规范 |
Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification (IEC 60938-1:1999); German version EN 60938-1:1999 |
| DIN EN ISO 7089-2000 |
平垫圈.标准系列.产品等级A |
Plain washers - Normal series, Product grade A (ISO 7089:2000); German version EN ISO 7089:2000 |
| DIN EN 301005-3-2000 |
数字业务节点(SN)处的V接口.宽带或宽带和窄带组合接入网络(ANs)的支持用在VB5.1参考点的接口.第3部分:试验 |
V interfaces at the digital Service Node (SN) - Interfaces at the VB5.1 reference point for the support of broadband or combined narrowband and broadband Access Networks (ANs) - Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification (Endors |
| DIN EN 301005-4-2000 |
数字业务节点(SN)处的V接口.宽带或宽带和窄带组合接入网络(ANs)的支持用在VB5.1参考点的接口.第4部分:抽象 |
V interfaces at the digital Service Node (SN) - Interfaces at the VB5.1 reference point for the support of broadband or combined narrowband and broadband Access Networks (ANs) - Part 4: Abstract Suite (ATS) and partial Protocol Implementation eXtra Inform |
| DIN EN ISO 15087-4-2000 |
牙科起子.第4部分:古普兰(Coupland)起子 (ISO 15087-4:2000); 德文版本 EN ISO 15087-4:2000 |
Dental elevators - Part 4: Coupland elevators (ISO 15087-4:2000); German version EN ISO 15087-4:2000 |
| DIN EN ISO 14744-3-2000 |
焊接.电子束焊接机的验收检验.第3部分:电子束电流特性的测量 |
Welding - Acceptance inspection of electron beam welding machines - Part 3: Measurement of beam current characteristics (ISO 14744-3:2000); German version EN ISO 14744-3:2000 |
| DIN EN ISO 14744-2-2000 |
焊接.电子束焊接机的验收检验.第2部分:加速电压特性的测量 |
Welding - Acceptance inspection of electron beam welding machines - Part 2: Measurement of acceleration voltage characteristics (ISO 14744-2:2000); German version EN ISO 14744-2:2000 |
| DIN EN 61754-12-2000 |
纤维光学连接器接口.第12部分:FS型连接器门类 |
Fibre optic connector interfaces - Part 12: Type FS connector family (IEC 61754-12:1999); German version EN 61754-12:1999 |
| DIN 22109-1-2000 |
煤矿用织物叠层输送带.第1部分:井下用单层输送带.尺寸.要求 |
Conveyor belts with textile plies for coalmining - Part 1: Monoply belts for underground applications; dimensions, requirements |
| DIN EN ISO 15606-2000 |
牙钻手柄.气动刮刀器和刮刀器尖端 (ISO 15606:1999); 德文版本 EN ISO 15606:1999 |
Dental handpieces - Air-powered scalers and scaler tips (ISO 15606:1999); German version EN ISO 15606:1999 |
| DIN ISO 9136-2-2000 |
磨料粒度.堆积密度的测定.粗磨粒 |
Abrasive grains - Determination of bulk density - Part 2: Microgrits (ISO 9136-2:1999) |
| DIN EN 1787-2000 |
食品.用ESR分光光度法检测经过辐射的含纤维素食品 |
Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy; German version EN 1787:2000 |
| DIN EN 1069-1-2000 |
2米或大于2米高的水滑道.第1部分:安全要求和试验方法 |
Water slides of 2 m height and more - Part 1: Safety requirements and test methods; German version EN 1069-1:2000 |
| DIN 19643-5-2000 |
游泳池和洗浴用水的处理.第5部分:处理方法组合:絮凝、过滤、粒状活性碳吸附和氯化作用 |
Treatment of water of swimming pools and baths - Part 5: Combination of process: Flocculation, filtration, adsorption at granular activated carbon; chlorination |
| DIN 25471-2000 |
带轻水反应堆的核电站燃料槽中核燃料元件在搬运和储存时燃耗应考虑的临界安全性 |
Criticality safety taking into account the burnup of fuel elements when handling and storing of nuclear fuel elements in fuel pools of nuclear power stations with lightwater reactors |
| DIN EN ISO 389-1-2000 |
声学.校正听力设备的基准零级.第1部分:纯音和压耳式耳机用的基准等效阈声压级 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 1: Reference equivalent treshold sound pressure levels for pure tones and supra-aural earphones (ISO 389-1:1998); German version EN ISO 389-1:2000 |
| DIN EN ISO 4759-3-2000 |
紧固件公差.第3部分:螺栓、螺钉和螺母用平垫圈.产品等级A和C |
Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts; product grades A and C (ISO 4759-3:2000); German version EN ISO 4759-3:2000 |
| DIN EN 12573-1-2000 |
焊接非承压热塑固定槽罐.第1部分:总则 |
Welded static non-pressurised thermoplastic tanks - Part 1: General principles; German version EN 12573-1:2000 |
| DIN ISO 4387-2000 |
卷烟.使用烟雾常规分析器测定总散粒物和不含尼古丁的干散粒物 |
Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine (ISO 4387:2000) |
| DIN ISO 10362-1-2000 |
卷烟.烟雾凝聚物中水分的测定.第1部分:气相色谱法 |
Cigarettes - Determination of water in smoke condensates - Part 1: Gas-chromatographic method (ISO 10362-1:1999) |
| DIN EN 300403-7-2000 |
综合业务数字网(ISDN).数字用户用1号信令系统(DSS1)协议.电路方式基本呼叫控制的信令网络层.第7部分:网络用 |
Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control - Part 7: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Informati |
| DIN EN 12045-2000 |
动力操纵的百叶窗.使用安全性.传递力测量 |
Shutters and blinds power operated - Safety in use - Measurement of the transmitted force; German version EN 12045:2000 |
| DIN EN 508-3-2000 |
金属薄板屋面制品.钢、铝或不锈钢薄板制半支撑屋面制品规范.第3部分:不锈钢 |
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel; German version EN 508-3:2000 |
| DIN EN 508-1-2000 |
金属薄板屋面制品.钢、铝或不锈钢薄板制半支撑屋面制品规范.第1部分:钢 |
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel; German version EN 508-1:2000 |
| DIN 18305-2000 |
建筑工程承包条例.第C部分:建筑工程通用技术规范.预排水工程 |
Contract procedures for building works - Part C: General technical specifications for building works (ATV); Predraining works |
| DIN EN 300646-1-2000 |
综合业务数字网(ISDN).7号信令系统.数字蜂窝式通信系统(阶段2).ISDN用ISDN用户部分(ISUP)第2版的应用.公共 |
Integrated Services Digital Network (ISDN) - Signalling System No. 7 - Digital cellular telecommunications system (phase 2); Application of ISDN User Part (ISUP) version 2 for the ISDN - Public Land Mobile Network (PLMN) signalling interface - Part 1: Pro |
| DIN EN 60249-2-2-2000 |
印制电路基材.第2部分:规范.第2号规范:经济质量酚醛纤维素纸覆铜层压板 |
Base materials for printed circuits - Part 2: Specifications; Specification No. 2: Phenolic cellulose paper copper-clad laminated sheet, economic quality (IEC 60249-2-2:1985 + A1:1989 + A2:1990 + A3:1993 + A4:1994 + A5:2000); German version EN 60249-2-2:1 |
| DIN EN 300899-1-2000 |
综合业务数字网(B-ISDN).7号信令系统.ISDN用户部分(ISUP)第2版和数字用户用1号信令系统(DSS1)间的相互作用. |
Integrated Services Digital Network (ISDN) - Signalling System No. 7 - Interworking between ISDN User Part (ISUP) version 2 and Digital Subscriber Signalling System No. one (DSS1) - Part 1: Protocol specification (ITU-T Recommendation Q.699, modified) (En |
| DIN VDE 0250-204-2000 |
电力设备用电缆、电线和软线.PVC护套电缆NYM |
Cables, wires and cords for power installation - PVC-Installation cable NYM |
| DIN EN 302093-2-2000 |
宽带综合业务数字网(B-ISDN).数字用户信令系统No.2(DSS2)协议.单独呼叫和承载环境下点对点多重接续承载电路 |
Broadband Integrated Services Digital Network (B-ISDN) - Digital Subscriber Signalling System No. two (DSS2) protocol; Point-to-point multiconnection bearer control specification in a separated call and bearer environment - Part 2: Protocol Implementation |
| DIN V 40102-1-2000 |
医用图形符号.第1部分:技术设备 |
Graphical symbols for use on medical - Part 1: Technical equipment |
| DIN EN 12573-4-2000 |
焊接非承压热塑固定槽罐.第4部分:法兰连接的设计和计算 |
Welded static non-pressurised thermoplastic tanks - Part 4: Design and calculation of flanged joints; German version EN 12573-4:2000 |
| DIN 6827-1-2000 |
电离辐射医用记录.第1部分:带电子加速器的治疗设备及ｘ射线和γ射线治疗设备 |
Recording in medical application of ionizing radiation - Part 1: Therapy with electron accelerators as well as X-ray and gamma-ray therapy systems |
| DIN EN 60254-2-2001 |
车用铅酸蓄电池.第2部分:蓄电池和端子尺寸及电池的极性标记 |
Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells (IEC 60254-2:1997 + A1:2000); German version EN 60254-2:1997 + A1:2000 |
| DIN EN 13176-2001 |
饮用水处理用化学品.酒精 |
Chemicals used for treatment of water intended for human consumption - Ethanol; German version EN 13176:2000 |
| DIN EN 1674-2001 |
食品加工机械.面团和面糊焙烤工具.安全和卫生要求 |
Food processing machinery - Dough and pastry brakes - Safety and hygiene requirements; German version EN 1674:2000 |
| DIN EN 12211-2000 |
门窗.抗风力载荷.试验方法 |
Windows and doors - Resistance to wind load - Test method; German version EN 12211:2000 |
| DIN EN 12926-2000 |
饮用水处理用化品.过氧化二硫酸钠 |
Chemicals used for treatment of water intended for human consumption - Sodium peroxodisulfate; German version EN 12926:2000 |
| DIN IEC 60780-2000 |
核电厂.安全系统电气设备.合格鉴定 |
Nuclear power plants - Electrical equipment of the safety system - Qualification (IEC 60780:1998) |
| DIN ETS 300557-2000 |
数字移动电话远程通信系统(阶段2).移动无线电接口.第3层规范 (英文版本核准本 ETS 300557:1999 作为德国标 |
Digital cellular telecommunications system (Phase 2) - Mobile radio interface - Layer 3 specification (Endorsement of the English version ETS 300557:1999 as German standard) |
| DIN EN 12932-2000 |
饮用水处理用化学品.应急化学品.二水二氯异氰脲酸钠 |
Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, dihydrate; German version EN 12932:2000 |
| DIN 30672-2000 |
持续工作温度不超过50℃的地下和水下管道外部有机防腐涂层.带材和可收缩材料 |
External organic coatings for the corrosion protection of buried and immersed pipelines for continuous operating temperatures up to 50 °C - Tapes and shrinkable materials |
| DIN EN 241-2000 |
液体石油产品.钠含量测定.原子吸收分光光度法 |
Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method; German version EN 241:2000 |
| DIN EN 12373-15-2000 |
铝及铝合金.阳极化处理.第15部分:阳极氧化层耐龟裂变形的评定 |
Aluminium and aluminium alloys - Anodizing - Part 15: Assessment of resistance of anodic oxidation coatings to cracking by deformation; German version EN 12373-15:2000 |
| DIN EN 13044-2000 |
交换物.编码、识别和标记 |
Swap bodies - Coding, identification and marking; German version EN 13044:2000 |
| DIN EN 300338-2000 |
电磁兼容性和无线电频谱情况(ERM).海上MF、MF/HF和/或VHF移动设施的数字选呼信号发生、传递和接收设备的技 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Technical characteristics and methods of measurement for equipment for generation, transmission and reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and/or VHF mobile s |
| DIN EN 12354-3-2000 |
建筑声学.根据元件性能评定建筑物声学性能.第3部分:室外气载声隔绝 |
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound; German version EN 12354-3:2000 |
| DIN EN 12467-2000 |
纤维水泥平板材.产品规范和试验方法 |
Fibre-cement flat sheets - Product specifications and test methods; German version EN 12467:2000 |
| DIN 2445-1-2000 |
承受动态载荷的无缝钢管.第1部分:流体系统用压力为100至500巴的热轧管 |
Seamless steel tubes for dynamic loads - Part 1: Hot finished tubes in fluid systems, 100 to 500 bar |
| DIN 2445-2-2000 |
承受动态载荷的无缝钢管.第2部分:流体系统用压力为100至500巴的精密钢管 |
Seamless steel tubes for dynamic loads - Part 2: Steel tubes for precision application in fluid systems, 100 bar to 500 bar |
| DIN 4123-2000 |
现有建筑物范围内的挖掘、地基和托换工程 |
Excavations, foundations and underpinnings in the area of existing buildings |
| DIN 5109-2000 |
细木工用锤 |
Joiners' hammers |
| DIN 6475-2000 |
双面大锤 |
Double face sledge hammers |
| DIN 6868-3-2000 |
X射线诊断部门的图像质量保证.第3部分:直接放射照相时的稳定性试验 |
Image quality assurance in diagnostic X-ray departments - Part 3: Tests for constancy in direct radiography |
| DIN 10811-1-2000 |
茶和茶制品的分析.液体茶饮料中可可碱和咖啡因含量测定.第1部分:HPLC常规方法 |
Analysis of tea and tea products - Determination of theobromine and caffeine content of fluid tea drinks - Part 1: HPLC-Routine method |
| DIN 11852-2000 |
食品和化学工业用阀门.不锈钢配件.焊合三通、弯头和异径接头 |
Valves for food and chemical industries - Stainless steel fittings - Tees, bends, reducers for welding-on |
| DIN 16893-2000 |
交联聚乙烯管(PE-X).尺寸 |
Crosslinked polyethylene (PE-X) pipes - Dimensions |
| DIN 18104-1-2000 |
机械安全设备.第1部分:门窗用辅助防盗产品.要求和试验方法 |
Mechanical security devices - Part 1: Additional burglar resistant products for windows and doors; requirements and test methods |
| DIN 18122-2-2000 |
土壤.调查和试验.第2部分:收缩极值测定 |
Soil - investigation and testing - Part 2: Determination of the shrinkage limit |
| DIN EN 12723-2000 |
液体泵.泵和设备的通用术语.定义、参数、字母符号和单位 |
Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units; German version EN 12723:2000 |
| DIN EN ISO 10239-2001 |
小型船舶.液化石油气系统 |
Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2000); German version EN ISO 10239:2000 |
| DIN EN ISO 12209-1-2001 |
储气瓶.压缩可呼吸空气用气瓶阀的放气连接器.第1部分:轭式连接件 |
Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1: Yoke type connections (ISO 12209-1:2000); German version EN ISO 12209-1:2000 |
| DIN CWA 13994-2000 |
X.500轮廓ADY12.分布式操作的DUA支持 |
X.500 Profile ADY12 - DUA Support of Distributed Operations |
| DIN EN 300094-2000 |
综合业务数字网(ISDN).被叫连接线识别提供(CLIP)补充业务.业务描述 |
Integrated Services Digital Network (ISDN) - Connected Line Identification Presentation (COLP) supplementary service - Service description (Endorsement of the English version EN 300094 V 2.1.1 (2000-06) as German standard) |
| DIN EN 12799-2000 |
钎焊.钎焊接头的无损检验 |
Brazing - Non-destructive examination of brazed joints; German version EN 12799:2000 |
| DIN EN 300064-6-2000 |
综合业务数字网(ISDN).直接拨入(DDI)补充业务.数字用户用1号信令系统(DSS1)协议.第6部分:网络用抽象试验组( |
Integrated Services Digital Network (ISDN) - Direct Dialling In (DDI) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol - Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing |
| DIN EN 12508-2000 |
金属和合金的腐蚀防护.金属和其它非有机涂层的表面处理.词汇 |
Corrosion protection of metals and alloys - Surface treatment, metallic and other non-organic coatings - Vocabulary; German version EN 12508:2000 |
| DIN EN 12518-2000 |
饮用水处理用化学品.高钙石灰 |
Chemicals used for treatment of water intended for human consumption - High-calcium lime; German version EN 12518:2000 |
| DIN EN 12286 Berichtigung 1-2000 |
DIN EN 12286-1999的技术勘误1 |
Corrigenda to DIN EN 12286:1999-02 (EN 12286:1998/A1:2000) |
| DIN 1042-2000 |
直平头锤和时间、十字平头锤 |
Straight pein hammers, cross pein hammers |
| DIN EN 12672-2000 |
饮用水处理用化学品.高锰酸钾 |
Chemicals used for treatment of water intended for human consumption - Potassium permanganate; German version EN 12672:2000 |
| DIN EN ISO 12179-2000 |
产品几何量规范(GPS).表面结构:轮廓法.接触(触针式)仪器的校准 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2000); German version EN ISO 12179:2000 |
| DIN EN 12168-2000 |
铜和铜合金.高速切削用空心棒材(包括修改件A1:2000); 德文版本 EN 12168:1998 + A1:2000 |
Copper and copper alloys - Hollow rod for free machining purposes (includes amendment A1:2000); German version EN 12168:1998 + A1:2000 |
| DIN EN 12179-2000 |
幕墙.抗风力载荷.试验方法 |
Curtain walling - Resistance to wind load - Test method; German version EN 12179:2000 |
| DIN EN 12469-2000 |
生物技术.微生物安全箱的性能标准 |
Biotechnology - Performance criteria for microbiological safety cabinets; German version EN 12469:2000 |
| DIN EN 12504-1-2000 |
结构混凝土试验.第1部分:起棱纹试样.取样、检查和压缩试验 |
Testing concrete in structures - Part 1: Cored specimens; taking, examining, and testing in compression; German version EN 12504-1:2000 |
| DIN 2445 Bb.1-2000 |
承受动态载荷的无缝钢管.设计规则 |
Seamless steel tubes for dynamic loads - Design rules |
| DIN EN 12545-2000 |
鞋靴、皮革和人造革制品生产机械.噪声试验规程.通用要求 |
Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements; German version EN 12545:2000 |
| DIN EN 12329-2000 |
金属防腐保护.带补充处理的铁和钢电解锌镀层 |
Corrosion protection of metals - Electrodeposited coatings of zinc with supplementary treatment on iron and steel; German version EN 12329:2000 |
| DIN EN 12546-1-2000 |
与食品接触的材料和物品.家用保温容器.第1部分:真空器皿、保温瓶和保温壶规范 |
Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 1: Specification for vacuum ware, insulated flasks and jugs; German version EN 12546-1:2000 |
| DIN EN 12546-2-2000 |
与食品接触的材料和物品.家用保温容器.第2部分:保温袋和保温箱规范 |
Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 2: Specification for insulated bags and boxes; German version EN 12546-2:2000 |
| DIN EN 12546-3-2000 |
与食品接触的材料和物品.家用保温容器.第3部分:热包装规范 |
Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 3: Specification for thermal packs; German version EN 12546-3:2000 |
| DIN EN 12669-2000 |
温室和非家庭空间补充加热用直接燃气式热空气吹风机 |
Direct gas-fired hot air blowers for use in greenhouses and supplementary non-domestic space heating; German version EN 12669:2000 |
| DIN EN 60534-3-1-2000 |
工业过程控制阀.第3-1部分:尺寸.法兰双通球形直型控制阀的端面间距尺寸和有法兰双通球形角型控制阀的中心与 |
Industrial-process control valves - Part 3-1: Dimensions; Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (IEC 60534-3-1:2000); German? |
| DIN EN 61340-2-3-2000 |
静电.第2-3部分:用于防止静电电荷积累的固态平面材料的电阻和电阻率测定的试验方法 |
Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation (IEC 61340-2-3:2000); German version EN 61340-2-3:2000 |
| DIN EN 300097-6-2000 |
综合业务数字网(ISDN).连接线路识别显示(COLP)补充业务.数字用户用1号信令系统(DSS1)协议.第6部分:网络用抽 |
Integrated Services Digital Network (ISDN) - Connected Line Identification Presentation (COLP) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol - Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtr |
| DIN EN 300098-6-2000 |
综合业务数字网(ISDN).被叫连接线识别限制(COLR)补充业务.数字用户用1号信令系统(DSS1)协议.第6部分:网络测 |
Integrated Services Digital Network (ISDN) - Connected Line Identification Restriction (COLR) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol - Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra |
| DIN EN 301484-1-2001 |
综合业务数字网.寻线补充业务.数字用户用1号信令系统协议.第1部分:协议规范 |
Integrated Services Digital Network (ISDN); Line Hunting (LH) supplementary service - Digital Subscriber Signalling System No. one (DSS1) - Part 1: Protocol specification (Endorsement of the English version EN 301484-1 V 1.1.1 (2000-04) as German standard |
| DIN EN ISO 9974-3-2000 |
一般用途和流体动力连接件.使用ISO 261螺纹的弹性密封或金属与金属密封的气门和双头螺栓端头.第3部分:(B型) |
Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996); German version EN ISO 9974-3:2000 |
| DIN VDE 0682-742-2000 |
电压为交流1000V以下和直流1500V以下的带电作业用架空设备 |
Aerial devices for live working on live parts with voltages up to a.c. 1000 V and d.c. 1500 V |
| DIN ISO 6751-2000 |
模具.圆柱头推杆 |
Tools for moulding - Ejector pins with cylindrical head (ISO 6751:1998) |
| DIN VDE 0281-9-2001 |
额定电压小于等于450/750 VPVC绝缘电缆.第9部分:低温工作单芯无护套电缆 |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 9: Single core non-sheathed cables for installation at low temperatures; German version HD 21.9 S2:1995 + A1:1999 |
| DIN 58949-7-2001 |
消毒.蒸汽消毒装置.第7部分:结构要求和提供服务要求 |
Disinfection - Steam disinfection-apparatus - Part 7: Structural requirements and requirements on service supply |
| DIN EN 300652-2001 |
宽带无线电接入网(BRAN).高效无线电局域网(HIPERLAN)(类型1).功能规范 |
Broadband Radio Access Networks (BRAN) - High PErformance Radio Local Area Network (HIPERLAN) Type 1 - Functional specification (Endorsement of the English version EN 300652 V 1.2.1 (1998-07) as German standard) |
| DIN EN 378-1-2000 |
冷冻设备和热力泵.安全性和环境要求.第1部分:基本要求、定义、分类和选择标准 |
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria; German version EN 378-1:2000 |
| DIN EN 60317-49-2000 |
特种绕组线规范.第49部分:温度指数180的玻璃纤维绕包树脂或漆浸渍裸或漆包圆铜线 |
Specifications for particular types of winding wires - Part 49: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 (IEC 60317-49:1999); German version EN 60317-49:2000 |
| DIN EN 1026-2000 |
门窗.透气率.试验方法 |
Windows and doors - Air permeability - Test method; German version EN 1026:2000 |
| DIN EN ISO 5774-2000 |
压缩空气用织物增强塑料软管.规范 |
Plastics hoses, textile-reinforced, for compressed air - Specification (ISO 5774:1997); German version EN ISO 5774:2000 |
| DIN EN ISO 10715-2000 |
天然气.取样导则 |
Natural gas - Sampling guidelines (ISO 10715:1997); German version EN ISO 10715:2000 |
| DIN ISO 8405-2000 |
模具.圆柱头推管.一般用途的基本系列 |
Tools for moulding - Ejector sleeves with cylindrical head - Basic series for general purposes (ISO 8405:1998) |
| DIN EN 197-2-2000 |
水泥.第2部分:合格评定 |
Cement - Part 2: Conformity evaluation; German version EN 197-2:2000 |
| DIN EN 60099-1 Berichtigung 1-2000 |
DIN EN 60099-1技术勘误 |
Corrigendum to DIN EN 60099-1 (VDE 0675 Teil 1):2000-08 |
| DIN EN 12671-2000 |
饮用水处理用化学品.二氧化氯 |
Chemicals used for treatment of water intended for human consumption - Chlorine dioxide; German version EN 12671:2000 |
| DIN EN ISO 8434-4-2000 |
液压及通用金属管件连接.第4部分:接头焊有O形密封圈的24度锥体连接件 |
Metallic tube connections for fluid power and general use - Part 4: 24° cone connectors with O-ring weld-on nipples (ISO 8434-4:1995); German version EN ISO 8434-4:2000 |
| DIN EN ISO 9974-1-2000 |
一般用途和流体动力连接件.使用ISO 261螺纹的弹性密封或金属与金属密封的气门和双头螺栓端头.第1部分:螺纹 |
Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 9974-1:1996); German version EN ISO 9974-1:2000 |
| DIN EN ISO 9974-2-2000 |
通用和液压传动用联接件.用ISO261弹性螺纹或金属与金属密封的气门和双头螺栓端头.第2部分:(E型)带弹性密封 |
Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996); German version EN ISO 9974-2:2000 |
| DIN EN ISO 7091-2000 |
平垫圈.标准系列.产品等级C |
Plain washers - Normal series, Product grade C (ISO 7091:2000); German version EN ISO 7091:2000 |
| DIN EN ISO 7092-2000 |
平垫圈.小型系列.产品等级 A |
Plain washers - Small series, Product grade A (ISO 7092:2000); German version EN ISO 7092:2000 |
| DIN 19569-4-2000 |
废水处理厂.结构设计原则和技术设备.第4部分:水闸、泄水闸门、叠梁闸门等截水设备的特殊原则 |
Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 4: Specific principles for shutoff devices as penstocks, sluice gates, stoplogs etc. |
| DIN VDE 0848-5-2001 |
电场、磁场和电磁场的安全.第5部分:防爆 |
Safety in electric, magnetic and electromagnetic fields - Part 5: Protection against explosion |
| DIN 6814-3-2001 |
放射技术领域的术语和定义.第3部分:放射剂量和单位 |
Terms and definitions in the field of radiological technique - Part 3: Dose quantities and units |
| DIN EN ISO 5509-2001 |
动植物油脂.脂肪酸甲酯的制备(ISO 5509:2000) |
Animal and vegetable fats and oils - Preparation of methyl esters of fatty acids (ISO 5509:2000); German version EN ISO 5509:2000 |
| DIN EN ISO 15253-2001 |
眼科光学和仪器.提高弱视力的光学装置 |
Ophthalmic optics and instruments - Optical devices for enhancing low-vision (ISO 15253:2000); German version EN ISO 15253:2000 |
| DIN ISO 3547-2-2000 |
滑动轴承.卷制轴套.第2部分:外径和内径试验数据 |
Plain bearings - Wrapped bushes - Part 2: Test data for outside and inside diameter (ISO 3547-2:1999) |
| DIN EN 1673-2001 |
食品加工机械.带旋转支架烘箱.安全和卫生要求 |
Food processing machinery - Rotary rack ovens - Safety and hygiene requirements; German version EN 1673:2000 |
| DIN EN 301525-2001 |
固定无线电系统.点对多点天线.在1GHz至3GHz频带上运行的点对多点固定无线电系统用天线 |
Fixed Radio Systems - Point to Multipoint Antennas - Antennas for Point-to-Multipoint fixed radio systems in the 1 GHz to 3 GHz band (Endorsement of the English version EN 301525 V 1.1.1 (2000-06) as German standard) |
| DIN EN ISO 3098-4-2000 |
技术产品文件.文字.第4部分:拉丁字母表用的区分标记和特殊标记 |
Technical product documentation - Lettering - Part 4: Diacritical and particular marks for the Latin alphabet (ISO 3098-4:2000); German version EN ISO 3098-4:2000 |
| DIN EN 12056-4-2001 |
建筑物重力排水系统.第4部分:废水提升设备、布置和计算 |
Gravity drainage systems inside buildings - Part 4: Wastewater lifting plants, layout and calculation; German version EN 12056-4:2000 |
| DIN EN 60444-1-2000 |
用π型网络的零相位技术测量石英晶体单元的参数.第1部分:用π型网络的零相位技术测量石英晶体单元的谐振频 |
Measurement of quartz crystal unit parameters by zero phase technique in a -network - Part 1: Basic method for the measurement of resonance frequency and resonance resistance of quartz crystal units by zero phase technique in a -network (IEC 60444-1:1986? |
| DIN EN 772-1-2000 |
圬工品试验方法.第1部分:压缩强度测定 |
Methods of test for masonry units - Part 1: Determination of compressive strength; German version EN 772-1:2000 |
| DIN EN 772-13-2000 |
圬工品试验方法.第13部分:圬工品湿密度和干总密度测定 |
Methods of test for masonry units - Part 13: Determination of net and gross dry density of masonry units (except for natural stone); German version EN 772-13:2000 |
| DIN EN 772-15-2000 |
圬工品试验方法.第15部分:高压蒸汽加气混凝土圬工品水蒸汽渗透率测定 |
Methods of test for masonry units - Part 15: Determination of water vapour permeability of autoclaved aerated concrete masonry units; German version EN 772-15:2000 |
| DIN EN 772-18-2000 |
圬工品试验方法.第18部分:硅酸钙圬工品抗冻熔性测定 |
Methods of test for masonry units - Part 18: Determination of freeze-thaw resistance of calcium silicate masonry units; German version EN 772-18:2000 |
| DIN EN 61300-2-43-2000 |
光纤互连装置和无源部件.基本试验和测量程序.第2-43部分:试验.单模式 PC 光纤连接器回路损耗的筛选试验 (IE |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-43: Tests; screen testing of return loss of single mode PC optical fibre connectors (IEC 61300-2-43:1999); German version EN 61300-2-4:1999 |
| DIN EN 61300-2-45-2000 |
光纤互连装置和无源部件.基本试验和测量程序.第2-45部分:试验.采用浸水法试验耐用性 (IEC 61300-2-45:1999) |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-45: Tests; durability test by water immersion (IEC 61300-2-45:1999); German version EN 61300-2-45:1999 |
| DIN EN ISO 1518-2000 |
色漆和清漆.刮痕试验 |
Paints and varnishes - Scratch test (ISO 1518:1992); German version EN ISO 1518:2000 |
| DIN ISO 9022-12-2000 |
光学和光学仪器.环境试验方法.第12部分:污染 |
Optics and optical instruments - Environmental test methods - Part 12: Contamination (ISO 9022-12:1994) |
| DIN ISO 10910-2000 |
有断屑器的可换位刀片的近似切屑控制范围的分类和命名 |
Classification and designation of approximate chip control zones for indexable inserts with chipbreakers (ISO 10910:1995) |
| DIN EN 300130-6-2000 |
综合业务数字网(ISDN).恶意呼叫识别(MCID)补充业务.数字用户用1号信令系统(DSS1)协议.第6部分:网络测试形式 |
Integrated Services Digital Network (ISDN) - Malicious Call Identification (MCID) supplementary service - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Informatio |
| DIN V ENV 13729-2000 |
保健信息.安全用户识别.使用微处理器卡件进行强验证 |
Health informatics - Secure user identification - Strong authentication using microprocessor cards; English version ENV 13729:2000 |
| DIN EN ISO 11254-1-2000 |
激光和激光设备.激光诱导的光学表面损伤阈值的测定.第1部分:1-on-1试验 |
Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1-on-1 test (ISO 11254-1:2000); German version EN ISO 11254-1:2000 |
| DIN EN ISO 7090-2000 |
倒角平垫圈.标准系列.产品等级A |
Plain washers, chamfered - Normal series, Product grade A (ISO 7090:2000); German version EN ISO 7090:2000 |
| DIN EN 300689-2002 |
通路和终端(AT).34MBit/s数字租用专线(D34U和D34S).终端设备接口 |
Access and Terminals (AT) - 34 Mbit/s digital leased lines (D34U and D34S) - Terminal equipment interface (Endorsement of the English version EN 300689 V 1.2.1 (2001-07) as German Standard) |
| DIN EN 13392-2001 |
纺织材料.单纤维丝.线密度测定 |
Textiles - Monofilaments - Determination of linear density; German version EN 13392:2001 |
| DIN 10479-2-2001 |
牛奶和奶制品脂肪含量的测脂仪测定.第2部分:产品特殊要求 |
Butyrometric determination of fat content of milk and milk products - Part 2: Requirements specific to products |
| DIN EN 61851-1-2001 |
电力道路车辆的电气设备.电动车辆感应充电系统.一般要求 |
Electric equipment of electric road vehicles - Electric vehicle conductive charging system - Part 1: General requirements (IEC 61851-1:2001); German version EN 61851-1:2001 |
| DIN EN 13181-2001 |
建筑物通风.终端.烟囱的性能试验 |
Ventilation for building - Terminals - Performance testing of louvres subject to simulated sand; German version EN 13181:2001 |
| DIN 51524-2-2006 |
压力液体.液压油.第2部分:HLP液压油.最低要求 |
Pressure fluids - Hydraulic oils - Part 2: HLP hydraulic oils; Minimum requirements |
| DIN EN 60730-2-14-2002 |
家用和类似用途自动电控制器.第2部分:电子传动装置的特殊要求 |
Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators (IEC 60730-2-14:1995, modified + A1:2001); German version EN 60730-2-14:1997 + A1:2001 |
| DIN EN 10002-1-2001 |
金属材料.拉力试验.第1部分:室温下的试验方法 |
Metallic materials - Tensile testing - Part 1: Method of testing at ambient temperature; German version EN 10002-1:2001 |
| DIN EN 13635-2001 |
灌溉技术.局部灌溉系统.制造商提供的术语和数据 |
Irrigation techniques - Localised irrigation systems - Terminology and data to be supplied by the manufacturer; German version EN 13635:2001 |
| DIN EN 60534-8-3-2001 |
工业过程控制阀.第8-3部分:噪声.控制阀气动噪声预测法 |
Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method (IEC 60534-8-3:2000); German version EN 60534-8-3:2000 |
| DIN 74060-3-2002 |
空气制动系统.气压传动装置.第3部分:制动室.制动盘技术参数 |
Air braking systems - Pneumatic actuator - Part 3: Brake chamber; Technical data for disc brake |
| DIN 8964-2-2002 |
制冷系统循环部件.第2部分:密封系统.要求 |
Circuit elements for refrigerating systems - Part 2: Sealed systems; Requirements |
| DIN EN ISO 15061-2001 |
水质.不溶溴酸盐含量测定.离子液相色谱法 |
Water quality - Determination of dissolved bromate - Method by liquid chromatography of ions (ISO 15061:2001); German version EN ISO 15061:2001 |
| DIN 32869-2-2002 |
技术产品文件.三维CAD(计算机辅助设计)模型.第2部分:属性要求 |
Technical product documentation - Three-dimensional CAD-models - Part 2: Requirements for attributes |
| DIN 68706-1-2002 |
木及木基板制内门.第1部分:门扉.术语、尺寸和要求 |
Interior doors made from wood and wood-based panels - Part 1: Door leaves; Concepts, sizes, requirements |
| DIN EN 13083-2001 |
危险货物运输罐.运输罐配套设备.底部装卸转接器 |
Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading; German version EN 13083:2001 |
| DIN EN 933-10-2001 |
集料的几何性能检验.第10部分:完好性评价.填充物分级(空气喷射筛选):德文版本 EN 933-10:2001 |
Test for geometrical properties of aggregates - Part 10: Assessment of fines; Grading of fillers (air jet sieving); German version EN 933-10:2001 |
| DIN EN 300394-4-4-2001 |
地面主干线广播.一致性试验规范.第4部分:直接模式操作用协议测试规范.第4-4子部分:1型直接模式中继器的试验 |
Terrestrial Trunked Radio (TETRA) - Conformance testing specification - Part 4: Protocol testing specification for Direct Mode Operation (DMO); Sub-part 4-4: Test Suite Structure and Test Purposes (TSS&TP) for Direct Mode Repeater (DM-REP) type 1 (Endorse |
| DIN EN 300394-4-13-2001 |
地面主干线广播.合格试验规范.第4部分:直接模式操作用协议测试规范.第4-13子部分:2型移动站中继器的抽象试 |
Terrestrial Trunked Radio (TETRA) - Conformance testing specification - Part 4: Protocol testing specification for Direct Mode Operation (DMO); Sub-part 4-13: Abstract Test Suite (ATS) for Mobile Station Repeater type 2 (Endorsement of the English version |
| DIN ETS 300905-2001 |
数字移动电话远程通信系统(阶段2).由移动通信全球系统(GSM)公共地面移动网络支持的远程服务 (英文版本核准 |
Digital cellular telecommunications system (Phase 2+) - Teleservices supported by a GSM Public Land Mobile Network (PLMN) (Endorsement of the English version ETS 300905:1998-01 as German standard) |
| DIN ETS 300974-2001 |
数字移动电话远程通信系统(阶段2).移动应用零件规范 (英文版本核准本 ETS 300974:2000-12 作为德国标准) |
Digital cellular telecommunications system (Phase 2+) - Mobile Application Part (MAP) specification (Endorsement of the English version ETS 300974:2000-12 as German standard) |
| DIN EN 13088-2001 |
羽毛和羽绒制品.填充后产品总重量和填充物重量的测定方法 |
Manufactured articles filled with feather and down - Method for the determination of a filled product's total mass and for the determination of the mass of the filling; German version EN 13088:2001 |
| DIN 30823-2001 |
中等容量容器.硬质IBC.金属、硬质、塑料和复合中等容量容器.尺寸、设计和要求、标记 |
Intermediate bulk containers - Rigid IBC - Metal, rigid plastics and composite intermediate bulk containers; Dimensions, design requirements, marking |
| DIN ETS 300934-2001 |
数字移动电话远程通信系统(阶段2).声音广播服务.2级 (英文版本核准本 ETS 300934:1998-12 作为德国标准) |
Digital cellular telecommunications system (Phase 2+) - Voice Broadcast Service (VBS) - Stage 2 (Endorsement of the English version ETS 300934:1998-12 as German standard) |
| DIN ETS 300939-2001 |
数字移动电话远程通信系统(阶段2).移动无线电接口信号传输第3层.一般特性 (英文版本核准本 ETS 300939:1997 |
Digital cellular telecommunications system (Phase 2+) - Mobile radio interface signalling layer 3 - General aspects (Endorsement of the English version ETS 300939:1997-12 as German standard) |
| DIN ETS 300913-2001 |
数字移动电话远程通信系统(阶段2).移动站终端适配功能概述 (英文版本核准本 ETS 300913:1999-07 作为德国标 |
Digital cellular telecommunications system (Phase 2+) - General on Terminal Adaptation Functions (TAF) for Mobile Stations (MS) (Endorsement of the English version ETS 300913:1999-07 as German standard) |
| DIN 66135-3-2001 |
颗粒特性.气体吸附微孔分析.第3部分:微孔容量测定 |
Particle characterization - Micropore analysis by gas adsorption - Part 3: Determination of the micropore volume according to Dubini and Radushkevich |
| DIN ETS 300917-2001 |
数字移动电话远程通信系统(阶段2).移动通信全球系统(GSM)应用编程接口 (英文版本核准本 ETS 300917:1998-05 |
Digital cellular telecommunications system (Phase 2+) - GSM Application Programming Interface (GSM-API) (Endorsement of the English version ETS 300917:1998-05 as German standard) |
| DIN ETS 300916-2001 |
数字移动电话远程通信系统(阶段2).移动通信全球系统(GSM)移动设备的AT命令集 (英文版本核准本 ETS 300916:1 |
Digital cellular telecommunications system (Phase 2+) - AT command set for GSM Mobile Equipment (ME) (Endorsement of the English version ETS 300916:1999-12 as German standard) |
| DIN ETS 300902-2001 |
数字移动电话远程通信系统(阶段2).短信息服务手机广播技术的实现 (英文版本核准本 ETS 300902:1999-02 作为 |
Digital cellular telecommunications system (Phase 2+) - Technical realization of Short Message Service Cell Broadcast (SMSCB) (Endorsement of the English version ETS 300902:1999-02 as German standard) |
| DIN ETS 300914-2001 |
数字移动电话远程通信系统(阶段2).使用异步承载电路功能服务的终端适配功能 (英文版本核准本 ETS 300914:19 |
Digital cellular telecommunications system (Phase 2+) - Terminal Adaptation Functions (TAF) for services using asynchronous bearer capabilities (Endorsement of the English version ETS 300914:1998-07 as German standard) |
| DIN ETS 300932-2001 |
数字移动电话远程通信系统(阶段2).增强式多级先后次序和优先权服务.2级 (英文版本核准本 ETS 300932:1997-0 |
Digital cellular telecommunications system (Phase 2+) - Enhanced Multi-Level Precedence and Pre-emption service (eMLPP) - Stage 2 (Endorsement of the English version ETS 300932:1997-05 as German standard) |
| DIN EN 1264-4-2001 |
地板供暖.系统和元部件.第4部分:安装 |
Floor heating - Systems and components - Part 4: Installation; German version EN 1264-4:2001 |
| DIN 58948-17-2001 |
消毒.低温消毒器.第17部分:低温蒸汽和甲醛消毒器的安装要求和使用要求 |
Sterilization - Low temperature sterilizers - Part 17: Requirements on the installation and requirements on the service supply for low temperature steam and formaldehyde sterilizers |
| DIN EN 60255-5-2001 |
电气继电器.第5部分:测量继电器和保护设备的绝缘配合.要求和试验 (IEC 60255-5:2000); 德文版本 EN 60255-5 |
Electrical relays - Part 5: Insulation coordination for measuring relays and protection equipment - Requirements and tests (IEC 60255-5:2000); German version EN 60255-5:2001 |
| DIN 2282-2-2001 |
几何产品规范(GPS).螺纹过端量规构件.第2部分:螺纹公称直径40mm至200mm的ISO通用公制螺纹的过端车间量规、 |
Geometrical Product Specifications (GPS) - "GO" screw gauging members - Part 2: "GO" workshop gauges, check and setting gauging members for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter |
| DIN EN 60601-2-5-2001 |
医用电气设备.第2-5部分:超声波理疗仪安全性特殊要求 |
Medical electrical equipment - Part 2-5: Particular requirements for the safety of ultrasonic physiotherapy equipment (IEC 60601-2-5:2000); German version EN 60601-2-5:2000 |
| DIN 58948-7-2001 |
消毒.低温消毒器.第7部分:安装要求和环氧乙烷消毒器工作要求 |
Sterilization - Low temperature sterilizers - Part 7: Requirements on the installation and requirements on the service supply for ethylene oxide sterilizers |
| DIN 2280-2001 |
几何产品规范(GPS).螺纹公称直径1mm至40mm的ISO通用公制螺纹的过端和不过端螺纹塞规 |
Geometrical Product Specifications (GPS) - "GO" and "NOT GO" screw plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter |
| DIN EN 786-2001 |
园艺设备.电动手操作和手持割草机和草坪棱边修剪机.机械安全性 |
Garden equipments - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge-trimmers - Mechanical safety (includes amendment A1:2001); German version EN 786:1996 + A1:2001 |
| DIN 2281-1-2001 |
几何产品规范(GPS).螺纹过端塞规.第1部分:螺纹公称直径1mm至40mm的ISO通用公制螺纹的过端车间量规、检验塞 |
Geometrical Product Specifications (GPS) - "GO" screw plug gauges - Part 1: "GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter |
| DIN 2281-2-2001 |
几何产品规范(GPS).螺纹过端塞规.第2部分:螺纹公称直径40mm至200mm的ISO通用公制螺纹的过端车间量规、检验 |
Geometrical Product Specifications (GPS) - "GO" screw plug gauges - Part 2: "GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter |
| DIN EN 12701-2001 |
结构胶粘剂.储存.结构胶粘剂和相关材料产品寿命单词和词组的确定 |
Structural adhesives - Storage - Determination of words and phrases relating to the product life of structural adhesives and related materials; German version EN 12701:2001 |
| DIN 87901-2001 |
泵用双向安全阀 |
Sniffle valves for pumps |
| DIN 2279-2001 |
几何产品规范(GPS).ISO公制螺纹量规.内外螺纹测量.综述、说明、标记、应用 |
Geometrical Product Specifications (GPS) - Gauges for ISO metric screw threads - Gauging of the internal and external threads; Survey, inscription, marking, application |
| DIN EN 12814-4-2001 |
热塑性半成品焊接接头试验.第4部分:剥离试验 |
Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test; German version EN 12814-4:2001 |
| DIN 10512-2001 |
食品卫生.单箱洗碗机商业洗碗.卫生要求、型号试验 |
Food hygiene - Commercial dishwashing with onetank-dishwashers - Hygiene requirements, type testing |
| DIN EN 13523-6-2002 |
卷材涂层金属.试验方法.第6部分:压痕后的粘合力 (深拉试验); 德文版本 EN 13523-6:2002 |
Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test); German version EN 13523-6:2002 |
| DIN EN 2591-506-2002 |
航空航天系列.光电连接件.试验方法.第506部分:工具的使用 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 506: Use of tools; German and English version EN 2591-506:2001 |
| DIN EN 2591-601-2002 |
航空航天系列.光电连接件.试验方法.第601部分:光学元件.嵌入损耗 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 601: Optical elements; Insertion loss; German and English version EN 2591-601:2001 |
| DIN EN ISO 8655-4-2002 |
活塞式容量测量仪器.第4部分:稀释器 (ISO 8655-4:2002); 德文版本 EN ISO 8655-4:2002 |
Piston-operated volumetric apparatus - Part 4: Dilutors (ISO 8655-4:2002); German version EN ISO 8655-4:2002 |
| DIN EN 361-2002 |
防止人员从高处跌落的保护设备.全身保护安全带; 德文版本 EN 361:2002 |
Personal protective equipment against falls from a height - Full body harnesses; German version EN 361:2002 |
| DIN 58940-8-2002 |
医疗微生物学.病原细菌对杀菌剂敏感性的测定方法.第8部分:微量稀释:一般方法和特殊要求 |
Medical microbiology - Susceptibility testing of pathogens to antimicrobial agents - Part 8: Microdilution; General method-specific requirements |
| DIN EN 60793-1-52-2002 |
光纤.第1-51部分:测量方法和试验程序.温度变换 (IEC 60793-1-52:2001); 德文版本 EN 60793-1-52:2002 |
Optical fibres - Part 1-52: Measurement methods and test procedures; Change of temperature (IEC 60793-1-52:2001); German version EN 60793-1-52:2002 |
| DIN EN ISO 8624-2002 |
眼科光学.眼镜框.测量系统和术语 (ISO 8624:2002); 德文版本 EN ISO 8624:2002 |
Ophthalmic optics - Spectacle frames - Measuring system and terminology (ISO 8624:2002); German version EN ISO 8624:2002 |
| DIN EN 60320-1-2002 |
家用和类似用途的设备耦合器.第1部分:一般要求 (IEC 60320-1:2001); 德文版本 EN 60320-1:2001 |
Appliance couplers for household and similar general purposes - Part 1: General requirements (IEC 60320-1:2001); German version EN 60320-1:2001 |
| DIN EN 61663-2-2002 |
雷电防护.通信线路.第2部分:使用金属导体的线路 (IEC 61633-2:2001); 德文版本 EN 61663-2:2001 |
Lightning protection - Telecommunication lines - Part 2: Lines using metallic conductors (IEC 61633-2:2001); German version EN 61663-2:2001 |
| DIN 83100-12-2002 |
船用重型铰链门.第12部分:不防风雨门.详细设计要求 |
Heavy hinged doors on ships - Part 12: Non weathertight, design details |
| DIN EN 1062-11-2002 |
色漆和清漆.外部砖石建筑和混凝土用覆层材料和涂覆系统.试验前的修整方法 |
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 11: Methods of conditioning before testing; German version EN 1062-11:2002 |
| DIN EN ISO 8655-6-2002 |
活塞式容量测量仪器.第6部分:确定测量误差的重量分析法 (ISO 8655-6:2002); 德文版本 EN ISO 8655-6:2002 |
Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error (ISO 8655-6:2002); German version EN ISO 8655-6:2002 |
| DIN EN ISO 8655-3-2002 |
活塞式容量测量仪器.第3部分:活塞式玻璃量管 (ISO 8655-3:2002); 德文版本 EN ISO 8655-3:2002 |
Piston-operated volumetric apparatus - Part 3: Piston burettes (ISO 8655-3:2002); German version EN ISO 8655-3:2002 |
| DIN 55671-2002 |
涂料、清漆和涂料与清漆用粘合剂.非挥发物质含量的快速测定用箔片法 |
Paints, varnishes and binders for paints and varnishes - Foil method for rapid determination of the non-volatile matter content |
| DIN 83100-1-2002 |
船舶用重型铰链门.第1部分:防风雨(ISO型)、分类和交货技术条件 |
Heavy hinged doors on ships - Part 1: Weathertight (ISO-type), classification, technical delivery conditions |
| DIN 18800-7-2002 |
钢结构.第7部分:制造和制造商合格鉴定 |
Steel structures - Part 7: Execution and constructor's qualification |
| DIN EN 61691-3-2-2002 |
行为语言.第3-2部分:硬件描述语言(VHDL)的数学运算 (IEC 61691-3-2:2001); 德文版本 EN 61691-3-2:2001 |
Behavioural languages - Part 3-2: Mathematical operation in VHDL (IEC 61691-3-2:2001); German version EN 61691-3-2:2001 |
| DIN EN 1744-3-2002 |
集料化学性能的试验.第3部分:采用沥滤法对洗出液的制备; 德文版本 EN 1744-3:2002 |
Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates; German version EN 1744-3:2002 |
| DIN EN 61479-2002 |
带电作业.绝缘材料的柔性导体封盖物 (线路软管) (IEC 61479:2001 + A1:2002); 德文版本 EN 61479:2001 + A1 |
Live working - Flexible conductor covers (line hoses) of insulating material (IEC 61479:2001 + A1:2002); German version EN 61479:2001 + A1:2002 |
| DIN EN 61508-3-2002 |
电气/电子/可编程电子安全相关系统的功能安全性.第3部分:软件要求 (IEC 61508-3:1998 + 技术勘误 1999); 德 |
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (IEC 61508-3:1998 + Corrigendum 1999); German version EN 61508-3:2001 |
| DIN EN 2591-607-2002 |
航空航天系列.电气和光学连接元件.试验方法.第607部分:光学元件.对周围光耦合的抗扰性; 德文版本 2591-607: |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 607: Optical elements; Immunity to ambient light coupling; German version EN 2591-607:2002 |
| DIN 10508-2002 |
食品卫生学.食品的温度要求 |
Food hygiene - Temperature requirements for foodstuffs |
| DIN EN 3475-508-2002 |
航空航天系列.航空用电缆.试验方法.第508部分:镀层厚度; 德文和英文版本 EN 3475-508:2002 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 508: Plating thickness; German and English version EN 3475-508:2002 |
| DIN EN 3475-509-2002 |
航空航天系列.航空用电缆.试验方法.第509部分:可焊性; 德文和英文版本 EN 3475-509:2002 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 509: Solderability; German and English version EN 3475-509:2002 |
| DIN EN 1010-3-2002 |
机械安全性.印刷机和换纸机的设计和建造的安全要求.第3部分:切削机; 德文版本 EN 1010-3:2002 |
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines; German version EN 1010-3:2002 |
| DIN EN 2591-603-2002 |
航空航天系列.光电连接件.试验方法.第603部分:光学元件.配电改变 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 603: Optical elements; Change of power distribution; German version EN 2591-603:2002 |
| DIN EN 14100-2002 |
航空航天.航天产品保证.载人航天器座舱材料和装配物品废品的确定 |
Aerospace - Space product assurance - The determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment; German and English version EN 14100:2001 |
| DIN EN 14098-2002 |
航空航天.航天产品保证.筛选航天材料和工艺的热循环试验 |
Aerospace - Space product assurance - Thermal cycling test for the screening of space materials and processes; German and English version EN 14098:2001 |
| DIN EN 12758-2002 |
建筑物用玻璃.玻璃装配和空气隔声.定义和性能测定; 德文版本 EN 12758-1:2001 |
Glass in building - Glazing and airborne sound insulation - Definitions and determination of properties; German version EN 12758-1:2001 |
| DIN EN 1990-2002 |
欧洲法规:结构设计基础; 德文版本 EN 1990:2002 |
Eurocode: Basis of structural design; German version EN 1990:2002 |
| DIN EN 1991-1-1-2002 |
欧洲法规1:对结构的作用.第1-1部分:一般作用.建筑物的比重、固有负荷和有效负荷 |
Eurocode 1: Actions on structures - Part 1-1: General actions; Densities, self-weight, imposed loads for buildings; German version EN 1991-1-1:2002 |
| DIN EN 60539-1-2002 |
直接加热负温度系数的热敏电阻器.第1部分:总规范 (IEC 60539-1:2002); 德文版本 EN 60539-1:2002 |
Directly heated negative temperature coefficient thermistors - Part 1: Generic specification (IEC 60539-1:2002); German version EN 60539-1:2002 |
| DIN EN 300392-11-18-2003 |
地面无线中继线路(TETRA).声音加数据(V+D).第11部分:补充业务阶段2.第18分部分:非主呼叫(BOC) |
Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 11: Supplementary services stage 2; Sub-part 18: Barring of Outgoing Calls (BOC) (Endorsement of the English version EN 300392-11-18 V 1.1.1 (2001-08) as German standard) |
| DIN EN 60601-2-10-2003 |
医疗电气设备.第2-10部分:神经和肌肉刺激器安全性特殊要求 |
Medical electrical equipment - Part 2-10: Particular requirements for the safety of nerve and muscle stimulators (IEC 60601-2-10:1987 + A1:2001-09 + Corrigendum 1:2002); German version EN 60601-2-10:2000 + A1:2001 |
| DIN EN 60749-3-2003 |
半导体器件.机械和气候试验方法.第3部分:外观检验 |
Semiconductor devices - Mechanical and climatic test methods - Part 3: External visual inspection (IEC 60749-3:2002); German version EN 60749-3:2002 |
| DIN EN 60749-7-2003 |
半导体器件.机械和气候试验方法.第7部分:内部水分含量测量和其他残留气体分析 |
Semiconductor devices - Mechanical and climatic test methods - Part 7: Internal moisture content measurement and the analysis of other residual gases (IEC 60749-7:2002); German version EN 60749-7:2002 |
| DIN EN 60749-12-2003 |
半导体器件.机械和气候试验方法.第12部分: 变频振动 |
Semiconductor devices - Mechanical and climatic test methods - Part 12: Vibration, variable frequency (IEC 60749-12:2002); German version EN 60749-12:2002 |
| DIN EN 10243-2 Corrigendum 1-2005 |
|
Steel die forgings Tolerances on dimensions - Part 2: Upset forgings made on horizontal forging machines Corrigendum 1 to English version of DIN EN 10243-2:2000-06 |
| DIN EN 12101-3 Corrigendum 1-2006 |
|
Smoke and heat control systems - Part 3: Specification for powered smoke and heat exhaust ventilators Corrigendum 1 to English version of DIN EN 12101-3:2002-06 |
| DIN EN 12209 Corrigendum 1-2006 |
|
Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Mechanically operated locks, latches and locking plates - Requirements and test methods Corrigendum 1 to English version of DIN EN 12209:2004-03 |
| DIN EN 12499 Corrigendum 1-2006 |
|
Internal cathodic protection of metallic structures Corrigendum 1 to English version of DIN EN 12499:2003-07 |
| DIN EN 1555-1-2003 |
气体燃料塑料管道供气系统.聚乙烯(PE).第1部分:总则 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General; German version EN 1555-1:2002 |
| DIN 21907-2003 |
矿山设计图.布置图图形设计 |
Mine plans - Graphic design of sheets |
| DIN 18232-5-2003 |
烟和热控制装置.第5部分:动力排烟系统.设计要求 |
Smoke and heat control installations - Part 5: Powered smoke exhaust systems; Requirements, design |
| DIN EN 60749-9-2003 |
半导体器件.机械和气候试验方法.第9部分:标记耐久性 |
Semiconductor devices - Mechanical and climatic test methods - Part 9: Permanence of marking (IEC 60749-9:2002); German version EN 60749-9:2002 |
| DIN 50450-9-2003 |
半导体工艺材料测试.载气和掺杂气体杂质测定.第9部分:用气相色谱法测定气态氯化氢中氧、氮、一氧化碳、二氧 |
Testing of materials for semiconductor technology - Determination of impurities in carrier gases and dopant gases - Part 9: Determination of oxygen, nitrogen, carbonmonoxide, carbondioxide, hydrogen and C-C-hydrocarbons in gaseous hydrogen chloride by gas |
| DIN EN 13739-2-2003 |
农业机械.固体肥料撒播机和全幅撒肥机.环境保护.第2部分:试验方法 |
Agricultural machinery - Solid fertilizer broadcasters and full-width distributors; Environmental protection - Part 2: Test methods; German version EN 13739-2:2003 |
| DIN EN 60684-3-420 bis 422-2003 |
绝缘软管.第3部分:各型软管规范.420至422节:丙烯酸酯聚酯纤维软管 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic based coating (IEC 60684-3-420 to 422:2002); German version EN 60684-3-420 bis 422:2002 |
| DIN EN 300765-1-2003 |
数字增强无线远程通信(DECT).本地回路(RLL)存取剖面(RAP)无线电业务 .第1部分:基本电话业务 |
Digital Enhanced Cordless Telecommunications (DECT) - Radio in the Local Loop (RLL) Access Profile (RAP) - Part 1: Basic telephony services (Endorsement of the English version EN 300765-1 V 1.3.1 (2001-04) as German standard) |
| DIN EN 14057-2003 |
铅和铅合金.废料.术语和定义 |
Lead and lead alloys - Scrap - Terms and definitions; German version EN 14057:2003 |
| DIN V EN 2345-1985 |
航空航天系列.铝及铝合金铆钉.技术规范 |
Aerospace series; aluminium and aluminium alloy rivets; technical specification |
| DIN EN 1794-1-2003 |
降低道路交通噪音的装置.非声学性能.第1部分:机械性能和稳定性要求 |
Road traffic noise reducing devices - Non-acoustic performance - Part 1: Mechanical performance and stability requirements; German version EN 1794-1:2003 |
| DIN 55991-1-2003 |
涂层材料.核设施涂层.第1部分:要求和试验方法 |
Coating materials - Coatings for nuclear facilities - Part 1: Requirements and test methods |
| DIN 13080 Bb.2-2003 |
按职能范围和职能分类划分的医院.专科学校和大学门诊部设置说明 |
Division of hospitals into functional areas and functional sections - Instructions for application for college and university clinics |
| DIN EN 916-2003 |
体操器械.跳箱.安全要求和试验方法 |
Gymnastic equipment - Vaulting boxes - Requirements and test methods including safety; German version EN 916:2003 |
| DIN-Fachbericht 128-2003 |
工作场所气候及环境.气候探查基本原则 |
Climate in the workplace and its environment - Basic principles for the ascertainment of climate |
| DIN-Fachbericht 120-2003 |
|
|
| DIN EN 80416-3-2003 |
设备上图形符号基本使用原则.第3部分:图形符号使用指南 |
Basic principles for graphical symbols for use on equipment - Part 3: Guidelines for the application of graphical symbols (IEC 80416-3:2002); German version EN 80416-3:2002 |
| DIN CEN/TS 13810-2-2003 |
木基板材.浮式地板.第2部分:试验方法 |
Wood-based panels - Floating floors - Part 2: Test methods; German version CEN/TS 13810-2:2003 |
| DIN EN 14042-2003 |
工作场所空气.暴露于化学和生物制剂的大气评定程序的应用和使用指南 |
Workplace atmospheres - Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents; German version EN 14042:2003 |
| DIN EN 50123-5-2003 |
铁路设施.固定设备.直流开关装置.第5部分:直流系统专用电涌放电器和低电压限制器 |
Railway applications - Fixed installations; D.C. switchgear - Part 5: Surge arresters and low-voltage limiters for specific use in d.c. systems; German version EN 50123-5:2003 |
| DIN EN 60442-2003 |
家用和类似用途的电烤箱.性能的测量方法 |
Electric toasters for household and similar purposes - Methods for measuring the performance (IEC 60442:1998 + A1:2003); German version EN 60442:1998 + A1:2003 |
| DIN EN 302062-2003 |
固定无线电系统.点对点设备.信道空间55/56MHz、携带STM-4、4 STM-1或2 STM-1信号的高容量数字无线电中继 |
Fixed Radio Systems - Point-to-point equipment - High capacity digital radio relay systems carrying STM-4, 4 × STM-1 or 2 × STM-1 signals in bands with 55/56 MHz channel spacing (Endorsement of the English version EN 302062 V 1.1.1 (2003-01) as German sta |
| DIN EN ISO 9513-2003 |
金属材料.单轴试验用伸长仪校正 |
Metallic materials - Calibration of extensometers used in uniaxial testing (ISO 9513:1999); German version EN ISO 9513:2002 |
| DIN EN ISO 7287-2003 |
热切割设备图形符号 |
Graphical symbols for thermal cutting equipment (ISO 7287:2002); German version EN ISO 7287:2002 |
| DIN EN 12418-2000 |
施工现场用砌块和石材切断机.安全 |
Masonry and stone cutting-off machines for job site - Safety; German version EN 12418:2000 |
| DIN EN 60601-2-23-2000 |
医疗电气设备.第2-23部分:经皮分压监护设备包括基本性能在内的安全性的特殊要求 |
Medical electrical equipment - Part 2-23: Particular requirements for the safety, including essential performance, of transcutaneous partial pressure monitoring equipment (IEC 60601-2-23:1999); German version EN 60601-2-23:2000 |
| DIN 10781-2000 |
炒研磨咖啡.103℃时质量损失测定(水分测定常规方法) |
Roasted ground coffee - Determination of loss in mass at 103 °C (Routine method for the determination of moisture content) |
| DIN EN ISO 3098-3-2000 |
技术产品文件.文字.第3部分:希腊字母 |
Technical product documentation - Lettering - Part 3: Greek alphabet (ISO 3098-3:2000); German version EN ISO 3098-3:2000 |
| DIN EN 12056-2-2001 |
建筑物内重力排水系统.第2部分:卫生管道的布局和计算 |
Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation; German version EN 12056-2:2000 |
| DIN EN 12629-1-2001 |
混凝土和硅酸盐建筑材料生产机械.安全性.第1部分:通用要求 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements; German version EN 12629-1:2000 |
| DIN EN 301444-2001 |
卫星地面站和系统(SES).根据R&TTE指令的3.2条款涉及基本要求的提供声音和/或数据通信的在1.5和1.6GHz频带上 |
Satellite Earth Stations and Systems (SES) - Harmonized EN for Land Mobile Earth Stations (LMES) operating in the 1,5 GHz and 1,6 GHz bands providing voice and/or data communications covering essential requirements under article 3.2 of the R&TTE directive |
| DIN EN 12041-2001 |
食品加工机械.成型机.安全和卫生要求 |
Food processing machinery - Moulders - Safety and hygiene requirements; German version EN 12041:2000 |
| DIN EN 12311-2-2000 |
防水软板.拉伸性能测定.第2部分:屋顶防水用塑料和橡胶薄板 |
Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 12311-2:2000 |
| DIN EN 50244-2000 |
居住房屋用易燃气体监测用电器设备.选择、安装、使用和维修指南 |
Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance; German version EN 50244:2000 |
| DIN EN 301134-2000 |
综合业务数字网(ISDN).接通无响应呼叫(CCNR)补充业务.业务描述 |
Integrated Services Digital Network (ISDN) - Completion of Calls on No Reply (CCNR) supplementary service - Service description (Endorsement of the English version EN 301134 V 1.1.1 (1998-10) as German standard) |
| DIN EN 301167-2000 |
传输和多路复用(TM).同步数字系列(SDH)传输设备的管理.故障管理和性能监测.功能描述 |
Transmission and Multiplexing (TM) - Management of Synchronous Digital Hierarchy (SDH) transmission equipment - Fault management and performance monitoring; functional description (Endorsement of the English version EN 301167 V 1.1.1 (1998-08) as German s |
| DIN EN 301175-2000 |
无线终端可动性(CTM).第1阶段.业务描述 |
Cordless Terminal Mobility (CTM) - Phase 1 - Service description (Endorsement of the English version EN 301175 V 1.1.1 (1998-08) as German Standard) |
| DIN EN 300367-2000 |
综合业务数字网(ISDN).显式呼叫转接(ECT)补充业务.业务描述 |
Integrated Services Digital Network (ISDN) - Explicit Call Transfer (ECT) supplementary service - Service description (Endorsement of the English version EN 300367 V 1.2.1 (1998-10) as German standard) |
| DIN EN 60529-2000 |
由外壳提供的防护等级(国际防护等级代码) |
Degrees of protection provided by enclosures (IP code) (IEC 60529:1989 + A1:1999); German version EN 60529:1991 + A1:2000 |
| DIN EN 12195-2-2001 |
道路车辆上的装载物固定装置.安全.第2部分:人造纤维制成的捆绑网 |
Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres; German version EN 12195-2:2000 |
| DIN EN 60938-2-2000 |
电磁干扰抑制用固定电感器.第2部分:分规范 |
Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification (IEC 60938-2:1999); German version EN 60938-2:1999 |
| DIN 6800-4-2000 |
光子辐射和电子辐射用探针型探测器的剂量测定程序.第4部分:胶片剂量测定法 |
Procedures of dosimetry with probe-type detectors for photon and electron radiation - Part 4: Film dosimetry |
| DIN VDE 0105-111-2000 |
电力设备的运行.第111部分:地下矿的特殊要求 |
Operation of electrical installations - Part 111: Particular requirements for underground mines |
| DIN VDE 0281-8-2000 |
额定电压小于等于450/750V聚氯乙烯绝缘电缆.第8部分:装饰链用无护套单芯电缆 |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 8: Single core non-sheathed cables for decorative chains; German version HD 21.8 S2:1999 |
| DIN EN 795/A1-2001 |
防高空坠落.固定设备.要求和试验.修改件A1; 德文版本 EN 795:1996/A1:2000 |
Protection against falls from a height - Anchor devices - Requirements and testing; Amendment A1; German version EN 795:1996/A1:2000 |
| DIN ISO 10791-4-2001 |
机床.加工中心的检验条件.第4部分:线性和回转轴线的定位精度和重复定位精度(ISO 10791-4:1998) |
Machine tools - Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes (ISO 10791-4:1998) |
| DIN ISO 10076-2001 |
金属粉末.用液体中重力沉淀和衰减测量测定粒度分布(ISO 10076:1991) |
Metallic powders - Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement (ISO 10076:1991) |
| DIN EN 13087-4-2001 |
防护头盔.试验方法.第4部分:保持系统效能 |
Protective helmets - Test methods - Part 4: Retention system effectiveness; German version EN 13087-4:2000 |
| DIN VDE 0281-7-2001 |
额定电压Insulation450/750 V及以下的PVC绝缘电缆.第7部分:90℃导线用内部布线的单芯无护套电缆 |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Single core non-sheathed cables for internal wiring for a conductor temperature of 90 °C; German version HD 21.7 S2:1996 + A1:1999 |
| DIN VDE 0281-3-2001 |
额定电压为450/750 V及以下的PVC绝缘电缆.第3部分:固定布线非铠装电缆 |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non sheathed cables for fixed wiring; German version HD 21.3 S3:1995 + A1:1999 |
| DIN EN ISO 283-1-2001 |
纺织输送带.满厚度拉伸试验.第1部分:拉伸强度、断裂延伸和标准荷载延伸测定 |
Textile conveyor belts - Full thickness tensile testing - Part 1: Determination of tensile strength, elongation at break and elongation at the reference load (ISO 283-1:2000); German version EN ISO 283-1:2000 |
| DIN EN ISO 2556-2001 |
塑料.大气压力下薄膜和薄板的透气率的测定.测压法 |
Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method (ISO 2556:1974); German version EN ISO 2556:2000 |
| DIN ISO 10791-3-2001 |
机床.加工中心的试验条件.第3部分:分度或连续的万能主轴头机床的几何精度试验(垂直Z轴)(ISO 10791-3:1998) |
Machine tools - Test conditions of machining centres - Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis) (ISO 10791-3:1998) |
| DIN ISO 11274-2001 |
土壤质量.水分保持特性的测定.实验室法 |
Soil quality - Determination of the water retention characteristics - Laboratory methods (ISO 11274:1998) |
| DIN EN 12159-2001 |
带垂直升降机箱的人和物料用建筑提升机 |
Builders hoists for persons and materials with vertically guided cages; German version EN 12159:2000 |
| DIN EN 13087-10-2001 |
防护头盔.试验方法.第10部分:耐辐射热 |
Protective helmets - Test methods - Part 10: Resistance to radiant heat; German version EN 13087-10:2000 |
| DIN EN 12970-2001 |
防水沥青砂胶.定义、要求和试验方法 |
Mastic asphalt for waterproofing - Definitions, requirements and test methods; German version EN 12970:2000 |
| DIN EN ISO 3269-2000 |
紧固件.验收检查 |
Fasteners - Acceptance inspection (ISO 3269:2000); German version EN ISO 3269:2000 |
| DIN EN 60044-7-2000 |
互感器.第7部分:电子电压互感器 |
Instrument transformers - Part 7: Electronic voltage transformers (IEC 60044-7:1999); German version EN 60444-7:2000 |
| DIN EN 12043-2001 |
食品加工机械.中间醒发成形机.安全和卫生要求 |
Food processing machinery - Intermediate provers - Safety and hygiene requirements; German version EN 12043:2000 |
| DIN EN ISO 3741-2001 |
声学.声压法测定噪声源声功率级.混响室精密法(ISO 3741:1999) |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms (ISO 3741:1999); German version EN ISO 3741:1999 |
| DIN EN 10291 Bb.1-2001 |
金属材料.单轴蠕变拉伸试验.试验方法.应用说明 |
Metallic materials - Uniaxial creep testing in tension - Method of test; indications for application |
| DIN EN 12442-3-2001 |
制造医疗装置用动物组织及其诱导生成物.第3部分:病毒和传输剂的消除和/或失效的证实 |
Animal tissue and their derivatives utilized in the manufacture of medical devices - Part 3: Validation of the elimination and/or inactivation of viruses and transmissible agents; German version EN 12442-3:2000 |
| DIN EN 12597-2001 |
沥青和沥青粘合剂.术语.三种语言版本EN12597:2000 |
Bitumen and bituminous binders - Terminology; Trilingual version EN 12597:2000 |
| DIN EN ISO 15614-4 Berichtigung 1-2008 |
|
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005); German version EN ISO 15614-4:2005, Corrigenda to DIN EN ISO 15614-4:2005-09; Germa |
| DIN EN ISO 17510-2-2008 |
|
Sleep apnoea breathing therapy - Part 2: Masks and application accessories (ISO 17510-2:2007); German version EN ISO 17510-2:2007 |
| DIN EN 455-2-2001 |
一次性医用手套.第2部分:物理特性要求和检测(包括技术勘误1-1996) |
Medical gloves for single use - Part 2: Requirements and testing for physical properties (including Technical Corrigendum 1:1996); German version EN 455-2:2000 |
| DIN EN 12158-1-2001 |
建筑物载货提升机.第1部分:带可达平台的提升机 |
Builders hoists for goods - Part 1: Hoists with accessible platforms; German version EN 12158-1:2000 |
| DIN EN 50191-2001 |
电气测试设备的安装和操作 |
Erection and operation of electrical test equipment; German version EN 50191:1999 |
| DIN EN 301442-2001 |
卫星地面站和系统(SES).根据R&TTE指令的3.2条款规定的基本要求的移动卫星服务频带2.0GHz卫星个人通信网络移 |
Satellite Earth Stations and Systems (SES) - Harmonized EN for Mobile Earth Stations (MESs), including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) in the 2,0 GHz bands under the Mobile Satellite Service (MSS) covering e |
| DIN EN 1677-4-2001 |
吊索用元部件.安全.第4部分:8级链索 |
Components for slings - Safety - Part 4: Links, grade 8; German version EN 1677-4:2000 |
| DIN EN 13087-5-2000 |
防护头盔.试验方法.第5部分:保持系统强度 |
Protective helmets - Test methods - Part 5: Retention system strength; German version EN 13087-5:2000 |
| DIN EN 12337-1-2000 |
建筑物玻璃.化学增强钠钙安全玻璃.第1部分:定义和描述 |
Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and description; German version EN 12337-1:2000 |
| DIN EN 12426-2000 |
工业、商业和汽车库用门.透气性.分类 |
Industrial, commercial and garage doors and gates - Air permeability - Classification; German version EN 12426:2000 |
| DIN 51429-1-2000 |
石油产品的检验.所选痕量元素的测定.第1部分:经过特定焚烧和分解方法后的原子吸收分光光度测定法 |
Testing of petroleum products - Determination of selected trace elements - Part 1: Atomic absorption spectrometry after specific incineration and digestion methods |
| DIN 54841-5-2000 |
地下电缆和管道用塑料报警装置.第5部分:电缆覆层 |
Plastic warning devices for underground cables and pipelines - Part 5: Cable cover |
| DIN EN 13188-2000 |
醋.农业原料的液体制品.定义、要求和标记 |
Vinegar - Product made from liquids of agricultural origin - Definitions, requirements, marking; German version EN 13188:2000 |
| DIN EN 13309-2000 |
建筑机械.带有内部电源的机器的电磁兼容性 |
Construction machinery - Electromagnetic compatibility of machines with internal electrical power supply; German version EN 13309:2000 |
| DIN 51828-1-2000 |
润滑剂和相关产品检验.快速生物降解能力测定.第1部分:总则 |
Testing of lubricants and related products - Determination of the rapid biodegradability - Part 1: General |
| DIN CLC/TS 50459-1-2008 |
|
Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Driver-Machine Interface - Part 1: Ergonomic principles for the presentation of ERTMS/ETCS/GSM-R information; German version CLC/TS 50459-1 |
| DIN CLC/TS 50459-4-2008 |
|
Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Driver-Machine Interface - Part 4: Data entry for the ERTMS/ETCS/GSM-R systems; German version CLC/TS 50459-4:2005 |
| DIN EN 3-9 Berichtigung 1-2008 |
|
Portable fire extinguishers - Part 9: Additional requirements to EN 3-7 for pressure resistance of CO2 extinguishers; German version EN 3-9:2006, Corrigenda to DIN EN 3-9:2007-02; German version EN 3-9:2006/AC:2007 |
| DIN EN 14392-2008 |
|
Aluminium and aluminium alloys - Requirements for anodised products for use in contact with foodstuff; German version EN 14392:2007 |
| DIN EN ISO 13407-2000 |
交互系统以人为中心的设计过程 |
Human-centred design processes for interactive systems (ISO 13407:1999); German version EN ISO 13407:1999 |
| DIN 45677-2001 |
人手臂系统在驱动点上受到的机械阻抗 |
Mechanical impedance of the human hand-arm system at the driving point |
| DIN EN ISO 9001-2000 |
质量管理体系.要求 |
Quality management systems - Requirements (ISO 9001:2000); Trilingual version EN ISO 9001:2000 |
| DIN EN ISO 9004-2000 |
质量管理体系.性能改进导则 |
Quality management systems - Guidelines for performance improvements (ISO 9004:2000); Trilingual version EN ISO 9004:2000 |
| DIN 10502-2-2000 |
食品卫生学.液体、粒状和粉状食品用容器.第2部分:适用性评定 |
Food hygiene - Containers for liquid, granulated and powdered foodstuffs - Part 2: Evaluation of suitability |
| DIN 54208-2001 |
纺织品的试验.二元混合物的定量分析.含有其它纤维特别是棉花的再生纤维素纤维.甲酸/氯化锌法 |
Testing of textiles - Quantitative analysis of binary mixtures - Regenerated cellulose fibres with other fibres, especially cotton; Formic acid/zinc chloride method |
| DIN EN 12056-3-2001 |
建筑物重力排水系统.第3部分:屋顶排水、布局和计算 |
Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation; German version EN 12056-3:2000 |
| DIN EN 708-2001 |
农业机械.带动力设备的耕作器具.安全性 |
Agricultural machinery - Soil working machines with powered tools - Safety (including amendment A1:2000); German version EN 708:1996 + A1:2000 |
| DIN EN 1503-2-2001 |
阀门.阀体、阀盖和阀套材料.第2部分:欧洲标准中没有规定的钢 |
Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified; German version EN 1503-2:2000 |
| DIN EN ISO 7029-2001 |
声学.听阈和年龄的关系的统计分布(ISO 7029:2000) |
Acoustics - Statistical distribution of hearing thresholds as a function of age (ISO 7029:2000); German version EN ISO 7029:2000 |
| DIN EN 12200-1-2001 |
地上露天用塑料雨水管道系统.未增塑聚氯乙烯.第1部分:管、管件和管道系统规范 |
Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the systems; German version EN 12200-1:2000 |
| DIN EN 1551-2001 |
工业货车的安全性.容量为10000kg的机动车辆 |
Safety of industrial trucks - Self propelled trucks over 10000 kg capacity; German version EN 1551:2000 |
| DIN EN 15275-2008 |
|
Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures; German version EN 15275:2007 |
| DIN EN 15362-2008 |
|
Chemicals used for treatment of swimming pool water - Sodium carbonate; German version EN 15362:2007 |
| DIN EN 1503-3-2001 |
阀门.阀体、阀盖和阀套材料.第3部分:欧洲标准规定的铸铁 |
Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European standards; German version EN 1503-3:2000 + AC:2001 |
| DIN 51413-9-2000 |
液态石油烃试验.气相色谱分析法.第9部分:采用柱转换程序对总芳烃和苯含量的测定 |
Testing of liquid petroleum hydrocarbons - Analysis by gas chromatography - Part 9: Determination of total aromatics and benzene by column switching procedure |
| DIN ISO 2977-2000 |
石油产品和烃类溶剂.苯胺点和混合苯胺的点测定 |
Petroleum products and hydrocarbon solvents - Determination of aniline point and mixed aniline point (ISO 2977:1997) |
| DIN EN 12425-2000 |
工业、商用和车库门和大门.耐水渗透特性.分类 |
Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification; German version EN 12425:2000 |
| DIN EN 1677-2-2000 |
吊索元部件.安全.第2部分:8级锻钢制带卡齿吊钩 |
Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, grade 8; German version EN 1677-2:2000 |
| DIN 18012-2000 |
建筑物中的家用连接设施.空间要求和设计原则 |
House service connection facilities in buildings - Space requirements, principles for planning |
| DIN EN 12348-2000 |
立式岩芯钻机.安全性 |
Core drilling machines on stand - Safety; German version EN 12348:2000 |
| DIN 16830-4-2000 |
门窗用高耐冲击聚氯乙烯(PVC-HI)型材.第4部分:表面着色的型材.试验方法 |
High impact polyvinyl chloride (PVC-HI) profiles for windows and doors - Part 4: Profiles with coloured surfaces; Test method |
| DIN 16830-3-2000 |
门窗用高耐冲击聚氯乙烯(PVC-HI)型材.第3部分:表面着色的型材.要求 |
High impact polyvinyl chloride (PVC-HI) profiles for windows and doors - Part 3: Profiles with coloured surfaces; Requirements |
| DIN EN ISO 8028-2000 |
真空喷漆用橡胶和/或塑料软管组件.规范 |
Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:1999); German version EN ISO 8028:2000 |
| DIN 55967-2000 |
色漆和清漆用原材料.甘油.要求和试验方法 |
Raw materials for paints and varnishes - Glycerine - Requirements and methods of test |
| DIN 55938-2000 |
色漆和清漆用粘合剂.精炼豆油.要求和试验方法 |
Binders for paints and varnishes - Refined soya bean oil - Requirements and methods of test |
| DIN EN ISO 4042-2001 |
紧固件.电镀层(ISO 4042:1999) |
Fasteners - Electroplated coatings (ISO 4042:1999); German version EN ISO 4042:1999 |
| DIN EN 61926-1-2000 |
设计自动化.第1部分:所有系统的标准测试语言.所有系统的通用缩略测试语言(C/ATLAS) |
Design automation - Part 1: Standard test language for all systems - Common abbreviated test language for all systems (C/ATLAS) (IEC 61926-1:1999); German version EN 61926-1:2000 |
| DIN EN 12505-2001 |
食品加工机械.食用油离心机.安全和卫生要求 |
Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements; German version EN 12505:2000 |
| DIN EN 12316-2-2001 |
防水软板.连接件抗剥离测定.第2部分:屋顶防水用塑料和橡胶板 |
Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 12316-2:2000 |
| DIN EN 12056-1-2001 |
建筑物重力排水系统.第1部分:总则和性能要求 |
Gravity drainage systems inside buildings - Part 1: General and performance requirements; German version EN 12056-1:2000 |
| DIN 25454-2000 |
核设施和粒子加速器发出的放射性成份退役过程中的遥控操作 |
Remotely controlled operations during decommissioning of radioactive components from nuclear facilities and particle accelerators |
| DIN ISO 3547-3-2000 |
滑动轴承.卷制轴套.第3部分:润滑油孔、油槽和油穴 |
Plain bearings - Wrapped bushes - Part 3: Lubrication holes, lubrication grooves and lubrication indentations (ISO 3547-3:1999) |
| DIN ISO 3547-4-2000 |
滑动轴承.卷制轴套.第4部分:材料 |
Plain bearings - Wrapped bushes - Part 4: Materials (ISO 3547-4:1999) |
| DIN EN ISO 734-2-2001 |
油料种子残留物.油含量的测定.第2部分:快速萃取法 |
Oilseed residues - Determination of oil content - Part 2: Rapid extraction method (ISO 734-2:1998); German version EN ISO 734-2:2000 |
| DIN EN ISO 3252-2001 |
粉末冶金.词汇 |
Powder metallurgy - Vocabulary (ISO 3252:1999); German version EN ISO 3252:2000 |
| DIN EN 13275-2000 |
低温容器.低温设备用泵 |
Cryogenic vessels - Pumps for cryogenic service; German version EN 13275:2000 |
| DIN EN ISO 4049-2001 |
牙科学.聚合物填充物、修复及粘接材料 |
Dentistry - Polymer-based filling, restorative and luting materials (ISO 4049:2000); German version EN ISO 4049:2000 |
| DIN EN 12427-2000 |
工业、商业和汽车库用门.透气性.试验方法 |
Industrial, commercial and garage doors and gates - Air permeability - Test method; German version EN 12427:2000 |
| DIN EN ISO 5436-1-2000 |
产品几何量规范(GPS).表面结构:轮廓方法.测量标准.第1部分:材料测量 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures (ISO 5436-1:2000); German version EN ISO 5436-1:2000 |
| DIN 1835-2-2000 |
铣刀用直柄.第2部分:卡盘和附件的连接尺寸 |
Parallel shanks for milling cutters - Part 2: Connecting dimensions for holder chucks, accessories |
| DIN EN 1677-1-2000 |
吊索用元部件.安全.第1部分:8级锻钢制元部件 |
Components for slings - Safety - Part 1: Forged steel components, grade 8; German version EN 1677-1:2000 |
| DIN 3852-2-2000 |
管件和阀门用管堵和螺纹孔.带惠氏管螺纹的螺塞.各类的总成本 |
Stud ends, ports, for fittings, valves - Plug screw with Whitworth pipe thread - General outlay of types |
| DIN EN 13179-2-2000 |
沥青混合物用填充集料的试验.第2部分:沥青数值:德文版本 EN 13179-2:2000 |
Tests for filler aggregate used in bituminous mixtures - Part 2: Bitumen number; German version EN 13179-2:2000 |
| DIN EN ISO 14246-2001 |
可运输气瓶.气瓶阀.生产试验和检验 |
Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections (ISO 14246:2001); German version EN ISO 14246:2001 |
| DIN EN 12613-2001 |
地下电缆和管线有可视特性的塑料报警装置 |
Plastics warning devices with visual characteristics for underground cables and pipelines; German version EN 12613:2001 |
| DIN EN 301783-1-2001 |
电磁兼容性和无线电频谱事宜(ERM).地面流动服务设施:可商用业余无线电设备.第1部分:技术特征和测量方法 |
Electromagnetic compatibility and Radio Spectrum Matters (ERM) - Land Mobile Service; Commercially available amateur radio equipment - Part 1: Technical characteristics and methods of measurement (Endorsement of the English version EN 301783-1 V 1.1.1 (20 |
| DIN EN 301783-2-2001 |
电磁兼容性和无线电频谱情况(ERM).陆上移动业务:可商用业余无线电设备.第2部分:包括R&TTE指令3.2条中基本要 |
Electromagnetic compatibility and Radio Spectrum Matters (ERM) - Land Mobile Service; Commercially available amateur radio equipment - Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive (Endorsement of the Engli |
| DIN EN 301453-1-2001 |
专用综合业务网(PISN).局间信令协议.转移补充业务.第1部分:试验组结构和试验目的(TSS&TP)规范 |
Private Integrated Services Network (PISN) - Inter-exchange signalling protocol; Diversion supplementary services (ISO/IEC 13873 (1995), modified) - Part 1: Test Suite Structure and Test Purposes (TSS&TP) specification (Endorsement of the English version? |
| DIN ISO 9022-13-2001 |
光学和光学仪器.环境试验方法.第13部分:组合冲击、碰撞或自由跌落与干热或干冷试验 |
Optics and optical instruments - Environmental test methods - Part 13: Combined shock, bump or free fall and dry heat or cold (ISO 9022-13:1998) |
| DIN EN 301487-1-2001 |
宽带综合业务数字网(B-ISDN).数字用户信号传输系统2号(DSS2)协议:转换式虚拟路径容量.第1部分:协议规范(ITU |
Broadband Integrated Services Digital Network (B-ISDN) - Digital Subscriber Signalling System No. two (DSS2) protocol; Switched virtual path capability - Part 1: Protocol specification (ITU-T Recommendation Q.2934 (1999), modified) (Endorsement of the Eng |
| DIN EN 301455-1-2001 |
专用综合业务网(PISN).局间信令协议.VPN"b"服务入口点的无绳终端呼入附加网络特征(ANF-CTMI).第1部分:成套 |
Private Integrated Services Network (PISN) - Inter-exchange signalling protocol; Cordless Terminal Incoming Call additional network feature (ANF-CTMI) for the VPN "b" service entry point - Part 1: Test Suite structure and Test Purposes (TSS&TP) (Endorseme |
| DIN ISO 9022-19-2001 |
光学和光学仪器.环境试验方法.第19部分:温度循环正弦或随机振动组合试验 |
Optics and optical instruments - Environmental test methods - Part 19: Temperature cycles combined with sinusoidal or random vibration (ISO 9022-19:1994) |
| DIN EN 301483-1-2001 |
专用综合业务网(PISN).内部交换信令协议.补充业务建议.第1部分:成套试验装置及试验目的规范 |
Private Integrated Services Network (PISN) - Inter-exchange signalling protocol; Advice of Charge (AoC) supplementary services (ISO/IEC 15049 (1997), modified) - Part 1: Test Suite Structure and Test Purposes (TSS&TP) specification (Endorsement of the Eng |
| DIN 83406-2-2001 |
船舶设备用铰链.第2部分:长铰链 |
Hinges for ships equipment - Part 2: Long type |
| DIN EN 12697-27-2001 |
沥青混合物.热混合沥青用试验方法.第27部分:取样:德文版本 EN 12697-27:2000 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 27: Sampling; German version EN 12697-27:2000 |
| DIN EN 12697-28-2001 |
沥青混合物.热混合沥青用试验方法.第28部分:胶粘剂含量、水含量和分级测定用样品制备:德文版本 EN 12697-28 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 28: Preparation of samples for determining binder content, water content and grading; German version EN 12697-28:2000 |
| DIN CWA 14050-13-2001 |
金融服务辅助设备接口规范.3.0版.第13部分:报警设备类接口 |
Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 13: Alarm device class interface (English Version CWA 14050-13:2000) |
| DIN CWA 14050-2-2001 |
金融服务辅助设备接口规范.3.0版.第2部分:服务等级定义 |
Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 2: Service classes definition (Englisch version CWA 14050-2:2000) |
| DIN 33403-3-2001 |
工作场所及其周边环境中的气候.第3部分:基于选定的气候指数评定温暖和炎热工作场所的气候 |
Climate at the workplace and its environments - Part 3: Assessment of the climate in the warm and hot working areas based on selected climate indices |
| DIN ETS 300625-2001 |
数字移动电话远程通信系统(阶段2).非结构补充服务数据.1级 (英文版本核准本 ETS 300625:1997-09 作为德国标 |
Digital cellular telecommunications system (Phase 2) - Unstructured Supplementary Service Data (USSD) - Stage 1 (Endorsement of the English version ETS 300625:1997-09 as German standard) |
| DIN ETS 300627-2001 |
数字移动电话远程通信系统(阶段2).用户和设备跟踪 (英文版本核准本 ETS 300627:1998-02 作为德国标准) |
Digital cellular telecommunications system (Phase 2) - Subscriber and equipment trace (Endorsement of the English version ETS 300627:1998-02 as German standard) |
| DIN 34817-2001 |
米制螺纹焊接螺钉 |
Weld screws with metric thread |
| DIN 6646-2001 |
包装方法.钢制非移动盖和移动盖式鼓形桶.跌落处理 |
Means of packaging - Non-removable head (tight head) and removable head (open head) drums made of steel - Drop handle |
| DIN CWA 14050-12-2001 |
金融服务辅助设备接口规范.3.0版.第12部分:摄影机设备类接口 |
Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 12: Camera device class interface (English Version CWA 14050-12:2000) |
| DIN EN 746-8-2001 |
工业热处理设备.第8部分:淬火设备安全特殊要求 |
Industrial thermoprocessing equipment - Part 8: Particular safety requirements for quenching equipment; German version EN 746-8:2000 |
| DIN CWA 14050-7-2001 |
金融服务辅助设备接口规范.3.0版.第7部分:校验读取器/扫描设备类接口 |
Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 7: Check reader/scanner device class interface (English Version CWA 14050-7:2000) |
| DIN ETS 300921-2001 |
数字移动电话远程通信系统(阶段2).服务可及性 (英文版本核准本 ETS 300921:1997-04 作为德国标准) |
Digital cellular telecommunications system (Phase 2+) - Service accessibility (Endorsement of the English version ETS 300921:1997-04 as German standard) |
| DIN ISO 15089-2001 |
水质.手工植物处理和杀虫剂用选择性免疫导则 |
Water quality - Guidelines for selective immunoassays for the determination of plant treatment and pesticide agents (ISO 15089:2000) |
| DIN ETS 300906-2001 |
数字移动电话远程通信系统(阶段2).移动站(MS)特性 (英文版本核准本 ETS 300906:1998-06 作为德国标准) |
Digital cellular telecommunications system (Phase 2+) - Mobile Stations (MS) features (Endorsement of the English version ETS 300906:1998-06 as German standard) |
| DIN EN 12560-5-2001 |
法兰及其接头.分级标识法兰用垫圈.第5部分:钢法兰用金属环接头垫圈 |
Flanges and their joints - Gaskets for class-designated flanges - Part 5: Metallic ring-joint gaskets for use with steel flanges; German version EN 12560-5:2001 |
| DIN EN 12560-4-2001 |
法兰及其接头.分级标识法兰用垫圈.第4部分:钢法兰用波纹形、平的或开槽的金属和嵌条金属垫圈 |
Flanges and their joints - Gaskets for class-designated flanges - Part 4: Corrugated, flat or grooved metallic and fillet metallic gaskets for use with steel flanges; German version EN 12560-4:2001 |
| DIN EN 12369-1-2001 |
木板.结构设计特征值.第1部分:OSB.碎料板和纤维板 |
Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards; German version EN 12369-1:2001 |
| DIN 1380-2001 |
小便池接头.要求和试验 |
Connectors for urinals - Requirements and testing |
| DIN EN 50290-1-1-2002 |
通信电缆.第1-1部分:总则 |
Communication cables - Part 1-1: General; German version EN 50290-1-1:2001 |
| DIN EN 416-1/A2-2002 |
非家用单燃烧器燃气式顶置辐射管加热器.第1部分:安全性.修改件A2 |
Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety; Amendment A2; German version EN 416-1:1999/A2:2001 |
| DIN EN 13787-2002 |
入口压力达100巴的气体压力调节器和相关安全装置用弹性体; 德文版本 EN 13787:2001 |
Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar; German version EN 13787:2001 |
| DIN V 49916-2002 |
频率控制和选择用压电和介电装置.词汇.压电和介电过滤器 (IEC/TS 61994-2:2000) |
Piezoelectric and dielectric devices for frequency control and selection - Glossary - Piezoelectric and dielectric filters (IEC/TS 61994-2:2000) |
| DIN EN 12952-3-2002 |
水管锅炉和辅助设备.第3部分:压力零件的设计和计算; 德文版本 EN 12952-3:2001 |
Water tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts; German version EN 12952-3:2001 |
| DIN EN 61754-15-2002 |
光纤连接器接口.第15部分:LSH型连接器系列 (IEC 61754-15:1999); 德文版本 EN 61754-15:2001 |
Fibre optic connector interfaces - Part 15: Type LSH connector family (IEC 61754-15:1999); German version EN 61754-15:2001 |
| DIN EN 13284-1-2002 |
固定源辐射.小范围粉尘质量浓度测定.第1部分:手工称重法 |
Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method; German version EN 13284-1:2001 |
| DIN EN 13104-2002 |
铁路设施.轮副和行车机构.动力轴.设计方法 |
Railway applications - Wheelsets and bogies - Powered axles; Design method; German version EN 13104:2001 |
| DIN EN 13649-2002 |
固定源辐射.专用气体有机化合物质量浓度的测定.活性炭和溶剂解吸法; 德文版本 EN 13649:2001 |
Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Activated carbon and solvent desorption method; German version EN 13649:2001 |
| DIN EN ISO 8501-2-2002 |
使用涂料和相关产品前钢基材准备.表面清洁度目视评定.第2部分:原有覆层局部除去后钢基材准备等级 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings (ISO 8501-2:1994); |
| DIN EN 12447-2002 |
土工织物和土工织物相关产品.测定耐水解作用的筛分试验方法; 德文版本 EN 12447:2001 |
Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water; German version EN 12447:2001 |
| DIN EN 615-2002 |
防火.灭火剂.干粉规范(不包括D级干粉)(包括修改件A1) |
Fire protection - Fire extinguishing media - Specifications for powders (other than class D powders) (includes Amendment A1:2001); German version EN 615:1994 + A1:2001 |
| DIN EN 13413-2002 |
地板弹性铺覆物.带填充纤维衬底的聚氯乙烯地板铺覆物.规范 |
Resilient floor coverings - Polyvinyl chloride floor coverings on a filled fibrous backing - Specification; German version EN 13413:2001 |
| DIN EN 60704-2-4-2002 |
家用和类似用途电器.空中传播噪声测定的试验规程.第2-4部分:洗衣机和离心式脱水机的特殊要求 (IEC 60704-2- |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-4: Particular requirements for washing machines and spin extractors (IEC 60704-2-4:2001); German version EN 60704-2-4:2001 |
| DIN EN 50357-2002 |
由于使用电子产品监视(EAS)、射频识别(RFID)和类似用途设备所产生的电磁场对人体辐射的评价; 德文版本 EN 5 |
Evaluation of human exposure to electromagnetic fields from devices used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications; German version EN 50357:2001 |
| DIN EN 301141-2-2002 |
综合业务数字网(ISDN).窄带多重业务传送系统(NMDS).第2部分:实施协议声明(PICS)格式规范 |
Integrated Services Digital Network (ISDN) - Narrowband Multi-service Delivery System (NMDS) - Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification (Endorsement of the English version EN 301141-2 V 1.3.1 (2001-06) as German? |
| DIN EN 1319-2002 |
有风扇输送助燃气体和/或燃烧物质传输、净热输入功率不超过70kW的空间加热用家用燃气式强制对流空气加热器 |
Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW (includes amendment A1:2001 + A2:1999); German version EN 1319:1998 + A1:2001 + A2:1999 |
| DIN EN 301069-1-2002 |
综合业务数字网(ISDN).信令系统No.7.ISDN用户部分(ISUP).应用传输机理.第1部分:协议规范 |
Integrated Services Digital Network (ISDN) - Signalling System No. 7 (SS7); ISDN User Part (ISUP); Application transport mechanism - Part 1: Protocol specification (ITU-T Recommendation Q.765, modified) (Endorsement of the English version EN 301069-1 V 1. |
| DIN EN 300356-17-2002 |
综合业务数字网(ISDN).信令系统No.7(SS7).国际接口ISDN用户部分(ISUP)第4版.第17部分:呼叫等待(CW)补充业务 |
Integrated Services Digital Network (ISDN) - Signalling System No. 7 (SS7); ISDN User Part (ISUP) version 4 for the international interface - Part 17: Call Waiting (CW) supplementary service (ITU-T Recommendation Q.733, clause 1 (1992), modified) (Endorse |
| DIN EN 300356-16-2002 |
综合业务数字网(ISDN).信令系统No.7(SS7).国际接口ISDN用户部分(ISUP)第4版.第16部分:呼叫保持(HOLD)补充业 |
Integrated Services Digital Network (ISDN) - Signalling System No. 7 (SS7); ISDN User Part (ISUP) version 4 for the international interface - Part 16: Call Hold (HOLD) supplementary service (ITU-T Recommendation Q.733, clause 2 (1993), modified) (Endorsem |
| DIN EN 60811-1-4-2002 |
电缆和光缆的绝缘和护套材料.通用试验方法.第1-4部分:一般应用.低温试验 |
Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-4: General application; Tests at low temperature (IEC 60811-1-4:1985 + Corrigendum May 1986 + A1:1993 + A2:2001); German version EN 60811-1-4:1995 + A2:2001 |
| DIN EN 50136-2-1-2002 |
警报系统.警报传输系统和设备.第2-1部分:警报传输设备的一般要求; 德文版本 EN 50136-2-1:1998 + 技术勘误? |
Alarm systems - Alarm transmission systems and equipment - Part 2-1: General requirements for alarm transmission equipment; German version EN 50136-2-1:1998 + Corrigendum 1998 + A1:2001 |
| DIN EN 12245-2002 |
可运输式储气瓶.全包装合成气瓶; 德文版本 EN 12245:2002 |
Transportable gas cylinders - Fully wrapped composite gas cylinders; German version EN 12245:2002 |
| DIN 17753-2002 |
精制镍和镍合金线材.性能 |
Wires of wrought nickel and nickel alloys - Properties |
| DIN EN 12274-1-2002 |
粘合液表面处理.试验方法.第1部分:粘合剂萃取物的取样; 德文版本 EN 12274-1:2001 |
Slurry surfacing - Test methods - Part 1: Sampling for binder extraction; German version EN 12274-1:2001 |
| DIN EN 13400-2002 |
鞋类.样品和试样的取样部位、制备和老化耐久性; 德文版本 EN 13400:2001 |
Footwear - Sampling location, preparation und duration of conditioning of samples and test pieces; German version EN 13400:2001 |
| DIN EN 588-2-2002 |
排水管和下水道纤维水泥管.第2部分:人孔和检查室 |
Fibre cement pipes for drains and sewers - Part 2: Manholes and inspection chambers; German version EN 588-2:2001 |
| DIN EN 50290-4-1-2002 |
通信电缆.第4-1部分:电缆使用的一般考虑.环境条件和安全特性; 德文版本 EN 50290-4-1:2001 |
Communication cables - Part 4-1: General considerations for the use of cables; Environmental conditions and safety aspects; German version EN 50290-4-1:2001 |
| DIN EN 301469-9-2002 |
数字增强无线远程通信(DECT).DECT信息包无线电服务(DPRS)试验实例库(TCL).第9部分:抽象试验序列(ATS).网络 |
Digital Enhanced Cordless Telecommunications (DECT) - DECT Packet Radio Service (DPRS) Test Case Library (TCL) - Part 9: Abstract Test Suite (ATS); Network (NWK) layer; Fixed radio Termination (FT) (Endorsement of the English version EN 301469-9 V 1.1.1 ( |
| DIN EN 301469-8-2002 |
数字增强无线远程通信(DECT).DECT信息包无线电服务(DPRS)试验实例库(TCL).第8部分:抽象试验序列(ATS).网络 |
Digital Enhanced Cordless Telecommunications (DECT) - DECT Packet Radio Service (DPRS) Test Case Library (TCL) - Part 8: Abstract Test Suite (ATS); Network (NWK) layer; Portable radio Termination (PT) (Endorsement of the English version EN 301469-8 V 1.1. |
| DIN EN ISO 12945-2-2000 |
纺织品.织物表面起球和起毛性的测定.第2部分:改进的马丁代尔法 |
Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method (ISO 12945-2:2000); German version EN ISO 12945-2:2000 |
| DIN EN 13527-2001 |
百页窗和百叶帘.操纵力的测量.试验方法 |
Shutters and blinds - Measurement of operating force - Test methods; German version EN 13527:1999 |
| DIN ISO 3547-1-2000 |
滑动轴承.卷制轴套.第1部分：尺寸 |
Plain bearings - Wrapped bushes - Part 1: Dimensions (ISO 3547-1:1999) |
| DIN EN 12434-2000 |
低温容器.低温软管 |
Cryogenic vessels - Cryogenic flexible hoses; German version EN 12434:2000 |
| DIN EN ISO 13716-2000 |
牙科学.可逆和不可逆水解胶体印模材料系统 |
Dentistry - Reversible-irreversible hydrocolloid impression material systems (ISO 13716:1999); German version EN ISO 13716:2000 |
| DIN 16876-2000 |
地下管道用高密度聚乙烯(PE-HD)管道和配件.尺寸和交货技术条件 |
Pipes and fittings of high-density polyethylene (PE-HD) for buried ducting - Dimensions and technical delivery conditions |
| DIN EN 13090-2001 |
建筑物燃气管道螺纹接头再密封方法 |
Means for resealing threaded joints of gas pipework in buildings; German version EN 13090:2000 |
| DIN ISO 10791-7-2001 |
机床.加工中心的试验条件.第7部分:精加工试件的精度(ISO 10791-7:1998) |
Machine tools - Test conditions for machining centres - Part 7: Accuracy of a finished test piece (ISO 10791-7:1998) |
| DIN ISO 9211-1-2001 |
光学和光学仪器.光学涂层.第1部分:定义(ISO 9211-1:1994) |
Optics and optical instruments - Optical coatings - Part 1: Definitions (ISO 9211-1:1994) |
| DIN 69904-2000 |
项目工作.项目管理系统.要素和结构 |
Project business - Project management systems - Elements and structures |
| DIN EN ISO 3171-2000 |
石油液体.自动管线采样 |
Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988); German version EN ISO 3171:1999 |
| DIN EN 12056-5-2001 |
建筑物重力排水系统.第5部分:安装、试验及操作、维护和用户说明书 |
Gravity drainage systems inside buildings - Part 5: Installation and testing, instructions for operation, maintenance and user; German version EN 12056-5:2000 |
| DIN EN 455-1-2001 |
一次性医用手套.第1部分:密封性要求和检验 |
Medical gloves for single use - Part 1: Requirements and testing for freedom from holes; German version EN 455-1:2000 |
| DIN 58949-1-2001 |
消毒.蒸汽消毒装置.第1部分:术语 |
Disinfection - Steam disinfection-apparatus - Part 1: Terminology |
| DIN EN 12640-2001 |
道路车辆货物安全性.商用货车系绑点.最低要求和试验 |
Securing of cargo on road vehicles - Lashing points on commerical vehicles for goods transportation - Minimum requirements and testing; German version EN 12640:2000 |
| DIN EN 60249-2-1-2000 |
印制电路基材.第2部分:规范.第1号规范:高电气质量酚醛纤维素纸覆铜层压板 |
Base materials for printed circuits - Part 2: Specifications; Specification No. 1: Phenolic cellulose paper copper-clad laminated sheet, high electrical quality (IEC 60249-2-1:1985 + A1:1989 + A2:1993 + A3:1994 + A4:2000); German version EN 60249-2-1:1994 |
| DIN ISO 11272-2001 |
土壤质量.干散密度的测定(ISO 11272:1998) |
Soil quality - Determination of dry bulk density (ISO 11272:1998) |
| DIN EN 792-6-2001 |
手持非电动工具.安全要求.第6部分:螺纹紧固件用装配动力工具 |
Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners; German version EN 792-6:2000 |
| DIN 685-3-2001 |
经过检验的圆钢链.第3部分:试验 |
Round steel link chains, tested - Part 3: Test |
| DIN EN 60249-2-4-2000 |
印制电路基材.第2部分:规范.第4号规范:普通级环氧化合物编织玻璃纤维覆铜层压板 |
Base materials for printed circuits - Part 2: Specifications; Specification No. 4: Epoxide woven glass fabric copper-clad laminated sheet, general purpose grade (IEC 60249-2-4:1987 + A1:1989 + A2:1992 + A3:1993 + A4:1994 + A5:2000); German version EN 6024 |
| DIN EN 12310-2-2000 |
防水软板.抗撕裂性测定.第2部分:屋顶防水用塑料和橡胶薄板 |
Flexible sheets for waterproofing - Determination of resistance to tearing - Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 12310-2:2000 |
| DIN EN 1011-4-2001 |
焊接.焊接金属材料推荐标准.第4部分:铝和铝合金电弧焊 |
Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys; German version EN 1011-4:2000 |
| DIN 51595-2000 |
石油产品的试验.沥青烯含量测定.庚烷沉淀 |
Testing of petroleum products - Determination of the content of asphaltenes - Precipitation with heptane |
| DIN EN ISO 7093-2-2000 |
平垫圈.大型系列.第2部分:产品等级C |
Plain washers - Large series - Part 2: Product grade C (ISO 7093-2:2000); German version EN ISO 7093-2:2000 |
| DIN 51529-2000 |
矿物油和相关产品的检验.用过的传热液体的检验和评定 |
Testing of mineral oils and related products - Testing and evaluation of used heat transfer fluids |
| DIN ISO 13805-2000 |
铝用釉瓷和搪瓷.在电解液作用下测定铝上瓷层附着力（剥落实验）. |
Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium by means of electrolytic solution (spall test) (ISO 13805:1999) |
| DIN V ENV 13800-2000 |
铅及铅合金.无铅基质分离的火焰原子吸收光谱(FAAS)分析法或感应耦合等离子体发射光谱(ICP-ES)分析法 |
Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES) without separation of the lead matrix; German version ENV 13800:2000 |
| DIN-Fachbericht 86-2000 |
土工织物和类似土工织物产品.抗化学性等的导则 |
|
| DIN EN 12390-6-2001 |
硬化混凝土试验.第6部分:试样劈裂拉伸强度 |
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens; German version EN 12390-6:2000 |
| DIN EN 300749-2001 |
数字视频广播(DVB).低于10GHz的微波分配系统(MMDS) |
Digital Video Broadcasting (DVB) - Microwave Distrubution Systems (MMDS) below 10 GHz (Endorsement of the English version EN 300749 V 1.1.2 (1997-08) as German standard) |
| DIN EN 844-12-2001 |
圆木和锯材.术语.第12部分:补充术语和总索引 |
Round and sawn timber - Terminology - Part 12: Additional terms and general index; German version EN 844-12:2000 |
| DIN EN 12445-2001 |
工业用、商用和车库用门.动力操纵门的使用安全.试验方法 |
Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods; German version EN 12445:2000 |
| DIN EN 13829-2001 |
建筑物热性能.建筑物空气渗透率测定.风扇增压法 |
Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method (ISO 9972:1996, modified); German version EN 13829:2000 |
| DIN EN 1726-2-2001 |
工业货车的安全.容量10000Kg及以下的自行式货车和拖杆拉力20000N及以下的牵引车.第2部分:带有提升操作者位 |
Safety of industrial trucks - Self-propelled trucks up to and including 10000 kg capacity and tractors with a drawbar pull up to and including 20000 N - Part 2: Additional requirements for trucks with elevating operator position and trucks specifically de |
| DIN EN ISO 4035-2001 |
六角薄螺母(倒角).产品等级A和B |
Hexagon thin nuts (chamfered) - Product grades A and B (ISO 4035:1999); German version EN ISO 4035:2000 |
| DIN 34802-2001 |
大扳拧矩内六角头螺钉 |
Hexalobular socket heat cap screw with large driving feature |
| DIN 12116-2001 |
玻璃试验.采用煮沸盐酸水溶液法试验耐冲击性.试验方法和分类 |
Testing of glass - Resistance to attack by a boiling aqueous solution of hydrochloric acid - Method of test and classification |
| DIN 6176-2001 |
根据DIN99-公式进行表面色差的比色评定 |
Colorimetric evaluation of colour differences of surface colours according to DIN99-formula |
| DIN 21912-2-2001 |
矿山平面图.露天矿山.第2部分:重建 |
Mine plans - Open cast mining - Part 2: Reconstruction |
| DIN EN 300267-3-2001 |
综合业务数字网(ISDN)."7 kHz电话服务"、"可视电话服务"、"视听会议服务"和"电视会议服务".数字用户用1号信 |
Integrated Services Digital Network (ISDN); Telephony 7 kHz videotelephony, audiographic conference and videoconference teleservices - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 3: Test Suite Structure and Test Purposes (TSS&TP) s |
| DIN EN 1568-3-2001 |
灭火介质.泡沫浓缩物.第3部分:非水溶液体表面应用的低膨胀泡沫浓缩物规范 |
Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for surface application to water-inmiscible liquids; German version EN 1568-3:2000 |
| DIN EN 1568-2-2001 |
灭火介质.泡沫浓缩物.第2部分:非水溶液体表面应用的高膨胀泡沫浓缩物规范 |
Fire extinguishing media - Foam concentrates - Part 2: Specifications for high expansion foam concentrates for surface application to water-inmiscible liquids; German version EN 1568-2:2000 |
| DIN ETS 300585-2001 |
数字移动电话远程通信系统(阶段2).数据终端设备的使用.短信息服务(SMS)和手机广播服务(CBS)用数据线路终端 |
Digital cellular telecommunications system (Phase 2) - Use of Data Terminal Equipment-Data Circuit terminating Equipment (DTE-DCE) interface for Short Message Service (SMS) and Cell Broadcast Service (CBS) (Endorsement of the English version ETS 300585:19 |
| DIN ETS 300526-2001 |
数字移动电话远程通信系统(阶段2).用户数据编制 (英文版本核准本 ETS 300526:1996-10 作为德国标准) |
Digital cellular telecommunications system (Phase 2) - Organization of subscriber data (Endorsement of the English version ETS 300526:1996-10 as German standard) |
| DIN CWA 14050-3-2001 |
金融服务辅助设备接口规范.3.0版.第3部分:打印装置接口 |
Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 3: Printers Device Class Interface (English version CWA 14050-3:2000) |
| DIN EN 301797-2001 |
电磁兼容性和无线电光谱.与涵盖R&TTE指导性条款3.2相协调的CT2无绳电话设备标准 |
Electromagnetic compatibility and Radio Spectrum Matters (ERM) - Harmonized EN for CT2 cordless telephone equipment covering essential requirements under article 3.2 of the R&TTE directive (Endorsement of the English version EN 301797 V 1.1.1 (2000-09) as |
| DIN EN 301430-2001 |
卫星地面站和系统(SES).包括R&TTE指令的3.2条款的基本要求在内的在11-12/13-14GHz频带上运行的卫星新闻收集 |
Satellite Earth Stations and Systems (SES) - Harmonized EN for Satellite News Gathering Transportable Earth Stations (SNG TES) operating in the 11-12/13-14 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE directive (Endor |
| DIN EN 12444-2001 |
工业用、商用和车库用门.防风.试验和计算 |
Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation; German version EN 12444:2000 |
| DIN ISO 4384-1-2001 |
滑动轴承.轴承金属硬度试验.第1部分:复合材料 |
Plain bearings - Hardness testing of bearing metals - Part 1: Compound materials (ISO 4384-1:2000) |
| DIN ISO 15178-2001 |
土壤质量.干烧法测定硫总含量 |
Soil quality - Determination of total sulfur by dry combustion (ISO 15178:2000) |
| DIN EN 1822-5-2001 |
高效粒子空气过滤器(HEPA和ULPA).第5部分:过滤器滤芯过滤效率的测定 |
High efficiency particulate air filters (HEPA and ULPA) - Part 5: Determining the efficiency of filter elements; German version EN 1822-5:2000 |
| DIN ISO 8600-4-2001 |
光学和光学仪器.医用内窥镜和内窥镜附件.第4部分:插入部分最大宽度测定 |
Optics and optical instruments - Medical endoscopes and endoscopic accessories - Part 4: Determination of maximum width of insertion portion (ISO 8600-4:1997) |
| DIN EN 12835-2001 |
密封百页窗.透气性试验 |
Airtight shutters - Air permeability test; German version EN 12835:2000 |
| DIN EN ISO 2439-2001 |
软质泡沫聚合材料.硬度测量(压痕技术) |
Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:1997, including Technical Corrigendum 1:1998); German version EN ISO 2439:2000 |
| DIN EN 12939-2001 |
建筑材料和产品热性能.用防护热板和热流量计测定热阻.厚产品的高热阻和中热阻 |
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance; German version EN 12939:2000 |
| DIN EN 301441-2001 |
卫星地面站和系统(SES).根据R&TTE指令3.2条款规定的基本要求的移动卫星服务频带1.6/2.4GHz卫星个人通信网络 |
Satellite Earth Stations and Systems (SES) - Harmonized EN for Mobile Earth Stations (MESs), including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) in the 1,6/2,4 GHz bands under the Mobile Satellite Service (MSS) coveri |
| DIN ETS 300326-2-2001 |
电磁兼容性和无线电频谱情况.地面航空通信系统(TFTS).第2部分:语音通信设备和无线电接口 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Terrestrial Flight Telecommunications System (TFTS) - Part 2: Speech services, radio interface (Endorsement of the English version ETS 300326-2:1998-08 as German standard) |
| DIN ETS 300326-1-2001 |
电磁兼容性和无线电频谱情况.地面航空通信系统(TFTS).第1部分:语音通信设备、设施和要求 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Terrestrial Flight Telecommunications System (TFTS) - Part 1: Speech services, facilities and requirements (Endorsement of the English version ETS 300326-1:1998-08 as German standard) |
| DIN 7311-1973 |
木工细刨 |
Wood smooth planes |
| DIN 48055-3-1971 |
通信架空线路用绝缘子心轴.钩型心轴 |
Insulator spindles for telecommunication overhead-lines; hook-shaped spindles |
| DIN 13146-1979 |
医疗器械.哈耶克氏锤 |
Medical instruments; mallet type Hajek |
| DIN 7993-1970 |
轴和孔用圆钢丝挡圈及挡圈槽 |
Round Wire Snap Rings and Snap Ring Grooves for Shafts and Bores |
