| 标准号 |
中文名 |
英文名 |
| DIN EN 10246-15-2000 |
钢管的无损检验.第15部分:生产焊接钢管用带材/板材的层状缺陷的自动超声波检验 |
Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections; German version EN 10246-15:2000 |
| DIN EN 300210-6-2000 |
综合业务数字网(ISDN).免费电话(FPH)补充业务.数字用户用1号信令系统(DSS1)协议.第6部分:网络用抽象试验组( |
Integrated Services Digital Network (ISDN) - Freephone (FPH) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol - Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)? |
| DIN EN 12771-2000 |
鞋靴.外鞋底试验方法.撕裂强度. |
Footwear - Test methods for outsoles - Tear strength; German version EN 12771:1999 |
| DIN 32974-2000 |
公共交通区有声信号.要求 |
Acoustic signals in public traffic areas - Requirements |
| DIN EN 504-2000 |
金属薄板屋顶制品.全支撑铜薄板屋顶制品规范 |
Roofing products from metal sheet - Specification for fully supported roofing products from copper sheet; German version EN 504:1999 |
| DIN EN 507-2000 |
金属薄板屋顶制品.全支撑铝薄板屋顶制品规范 |
Roofing products from metal sheet - Specification for fully supported roofing products of aluminium sheet; German version EN 507:1999 |
| DIN 51401-1 Bb.1-2000 |
原子吸收光谱测量法(AAS).第1部分:术语;解释 |
Atomic absorption spectrometry (AAS) - Part 1: Terms; explanations |
| DIN 16962-5-2000 |
聚丙烯压力管道用管连接件和零件.PP-H100,PP-B80,PP-R80.第5部分:一般质量要求.试验 |
Pipe joints and components of polypropylene (PP) for pipes under pressure, PP-H 100, PP-B 80 and PP-R 80 - Part 5: General quality requirements, testing |
| DIN EN 13014-2000 |
麻醉和呼吸设备的气体取样管的接头 |
Connections for gas sampling tubes to anaesthetic and respiratory equipment; German version EN 13014:2000 |
| DIN 52461-2000 |
建筑施工中密封化合物的试验.新用的可喷接缝产品的耐雨强度 |
Testing of sealing compounds in building construction - Rain strength of just applied sprayable jointing products |
| DIN 54530-10-2000 |
纸和纸板.纸筒的检验.第10部分:表面粗糙度的测定 |
Paper and board - Testing of cores - Part 10: Determination of surface roughness |
| DIN 55651-2000 |
涂料和清漆用溶剂.符号 |
Solvents for paints and varnishes - Symbols |
| DIN EN 61249-3-4-1999 |
印制板和其它互连结构用材料.第3-4部分:涂覆和未涂覆非增强基材(用于挠性印制板)的分规范集.粘着的涂覆挠性 |
Materials for printed boards and other interconnecting structures - Part 3-4: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards); adhesive coated flexible polyimide film (IEC 61249-3-4:1999) |
| DIN 3319-2002 |
碟形手轮.锥形方头毂孔 |
Hand-wheels, dished - Hub hole with tapered square |
| DIN EN ISO 15013-2008 |
|
Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2007); German version EN ISO 15013:2007 |
| DIN CEN/TS 12983-3-2008 |
|
Cookware - Domestic cookware for use on top of a stove, cooker or hob - Part 3: Cookware for use on induction heating sources; German version CEN/TS 12983-3:2007 |
| DIN EN 15460-2008 |
|
Water quality - Guidance standard for the surveying of macrophytes in lakes; German version EN 15460:2007 |
| DIN EN 12918-1999 |
水质.用二氯甲烷萃取分析法和气相色谱分析法测定水中的对硫磷、甲基对硫磷和其它有机磷化合物 |
Water quality - Determination of parathion, parathion-methyl and some other organophosphorus compounds in water by dichloromethane extraction and gas chromatographic analysis; German version EN 12918:1999 |
| DIN EN ISO 12866-2000 |
眼科设备.视野镜 |
Ophthalmic instruments - Perimeters (ISO 12866:1999, including Corrigendum); German version EN ISO 12866:1999 + AC:2000 |
| DIN EN 60599-1999 |
使用中浸渍矿物油的电气设备.溶解的和游离气体分析结果解释的导则 |
Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis (IEC 60599:1999); German version EN 60599:1999 |
| DIN EN 301240-1999 |
数字增强无线通信(DECT).数据库服务协议子集(DSP).因特网入口与一般多协议数据包传输的点到点协议(PPP)交换 |
Digital Enhanced Cordless Telecommunications (DECT) - Data Services Profile (DSP) - Point-to-Point Protocol (PPP) interworking for internet access and general multi-protocol datagram transport (Endorsement of the English version EN 301240 V 1.1.3 (1998-06 |
| DIN EN ISO 3262-8-1999 |
涂料用填充剂.试验方法规范.第8部分:天然粘土 |
Extenders for paints - Specifications and methods of test - Part 8: Natural clay (ISO 3262-8:1999); German version EN ISO 3262-8:1999 |
| DIN EN 60601-2-39-2000 |
医疗电气设备.第2-39部分:腹膜透析安全的特殊要求 |
Medical electrical equipment - Part 2-39: Particular requirements for the safety of peritoneal dialysis equipment (IEC 60601-2-39:1999); German version EN 60601-2-39:1999 |
| DIN EN 50136-2-4-2000 |
警报系统.警报传输系统和设备.第2-4部分:使用公共交换电话网络带声音通信器的系统设备的要求 |
Alarm systems - Alarm transmission systems and equipment - Part 2-4: Requirements for equipment used in systems with voice communicators using the public switched telephone network; German version EN 50136-2-4:1998 |
| DIN EN 12770-2000 |
鞋靴.外鞋底试验方法.耐磨性. |
Footwear - Test methods for outsoles - Abrasion resistance; German version EN 12770:1999 |
| DIN EN 1766-2000 |
混凝土结构防护和修理用产品和系统.试验方法.试验参考混凝土.德文版本EN 1766-2000 |
Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing; German version EN 1766:2000 |
| DIN 40433-2000 |
Pg7至Pg48钢管螺纹用机械丝锥 |
Machine taps for steel conduit thread Pg 7 to Pg 48 |
| DIN 40432-2000 |
Pg7至Pg48钢管螺纹用二件一套的丝锥 |
Sets of two taps for steel conduit thread Pg 7 to Pg 48 |
| DIN 5157-2000 |
G1/16至G4和Rp1/16至Rp4管螺纹用二件一套丝锥 |
Sets of 2 taps for pipe threads G 1/16 to G 4 and Rp 1/16 to Rp 4 |
| DIN 377-2000 |
符合DIN 10的方头传动刀具用接长杆 |
Extensions for tools with driving square according to DIN 10 |
| DIN 56930-2-2000 |
舞台照明控制系统.第2部分:控制信号 |
Stage lighting control systems - Part 2: Control signals |
| DIN 58724-2000 |
光学加工.球径计.球径计环 |
Production in optical engineering - Spherometer - Ring for spherometer |
| DIN EN 10243-1 Corrigendum 1-2005 |
|
Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings Corrigendum 1 to English version of DIN EN 10243-1:2000-06 |
| DIN 58901-1-2000 |
止血学.因子Ⅶ凝血剂活性(FⅦ C)的测定.第1部分:一个阶段方法用参考测量程序 |
Haemostaseology - Determination of factor VII coagulant activity (F VII C) - Part 1: Reference measurement procedure for the one-stage method |
| DIN ETS 300183/A1-2000 |
综合业务数字网(ISDN).会议呼叫附加补充服务.服务说明 |
Integrated Services Digital Network (ISDN) - Conference call, add-on (CONF) supplementary service - Service description (Endorsement of the English version ETS 300183:1992/A1:1998 as German standard) |
| DIN EN 1330-9-2000 |
无损检测.术语.第9部分:声传播试验术语 |
Non-destructive testing - Terminology - Part 9: Terms used in acoustic emission testing; Trilingual version EN 1330-9:2000 |
| DIN ETS 300173-2000 |
专用综合业务网(PISN).规范、功能模式和信息流.标识辅助服务 |
Private Integrated Services Network (PISN) - Specification, functional models and information flows - Identification supplementary services [ISO/IEC 14136 (1995), modified] (Endorsement of the English version ETS 300173:1996 as German standard) |
| DIN EN 10222-2-2000 |
承压钢锻件.第2部分:具备特定高温性能的铁素体和马氏体钢(包括技术勘误AC:2000) |
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties (including corrigendum AC:2000); German version EN 10222-2:1999 + AC:2000 |
| DIN EN ISO 13736-2000 |
石油产品和其他液体.闪点的测定.阿贝耳闭口杯法 |
Petroleum products and other liquids - Determination of flashpoint - Abel closed cup method (ISO 13736:1997); German version EN ISO 13736:1997 |
| DIN EN 301117-2000 |
宽带综合业务数字网络(B-ISDN).异步传送方式(ATM)适配层(AAL).亚层:提供面向连接的传输服务(COTS)的业务说 |
Broadband Integrated Services Digital Network (B-ISDN) - ATM Adaptation Layer (AAL) - Sublayers: Service Specific Co-ordination Function (SSCF) to provide the Connection-Oriented Transport Service (COTS) [ITU-T Recommendation I.365.3 (1995)] (Endorsement? |
| DIN EN 300417-1-2-2000 |
传输和多路复用(TM).设备传输功能性一般要求.第1-2部分:实现一致性语句（ICS)的形式的一般信息 |
Transmission and Multiplexing (TM) - Generic requirements for transport functionality of equipment - Part 1-2: General information about Implementation Conformance Statement (ICS) proforma (Endorsement of the English version EN 300417-1-2 V 1.1.3 (1999-05 |
| DIN V 66291-1-2000 |
根据信号G和信号V的数字信号应用/功能的存储芯片.第1部分:应用接口 |
Chipcards with digital signatur application/function according to SigG and SigV - Part 1: Application interface |
| DIN 43772 Bb.1-2000 |
控制技术.玻璃管液体温度计、度盘式温度计、热电耦和电阻温度计用保护管和伸缩管.指定保护管/温度计的一般 |
Control technology - Protective tubes and extention tubes for liquid-in-glass thermometers, dial thermometers, thermocouples and resistance thermometers - General review; assignment protective tube/thermometer |
| DIN 43772-2000 |
控制技术.玻璃管液体温度计、度盘式温度计、热电耦和电阻温度计用保护管和伸缩管.尺寸、材料和试验 |
Control technology - Protective tubes and extension tubes for liquid-in-glass thermometers, dial thermometers, thermocouples and resistance thermometers - Dimensions, materials, testing |
| DIN 2189-2000 |
管螺纹G1/6至G1用冷成形丝锥.尺寸 |
Cold-forming taps for pipe threads G 1/6 to G1 - Dimensions |
| DIN 5156-2000 |
G1/16至G2及Rp1/16至Rp2管螺纹用机用丝锥 |
Machine taps for pipe threads, G 1/16 to G 2 and Rp 1/16 to Rp 2 |
| DIN 56930-1-2000 |
舞台照明系统.第1部分:定义和要求 |
Stage lighting systems - Part 1: Definitions, requirements |
| DIN 5031-10-2000 |
光辐射物理学和照明技术.第10部分:光生物学的有效辐射、量、公式符号和作用 |
Optical radiation physics and illuminating engineering - Part 10: Photobiologically effective radiation, quantities, symbols and actions |
| DIN ETS 300394-4-8-2000 |
地面主干线广播(TETRA).一致性试验规范.第4部分:直接运行模式(DMO)用协议试验规范.第8子部分:直接模式网关( |
Terrestrial Trunked Radio (TETRA) - Conformance testing specification - Part 4: Protocol testing specification for Direct Mode Operation (DMO); Sub-part 8: Test Suite Structure and test Purposes (TSS&TP) for Direct Mode Gateway (DM-GATE) (Endorsement of t |
| DIN 43861-3-2000 |
脉动控制接收器.第三部分:脉动控制系统的传输协议 |
Ripple control receiver - Part 3: Transmission protocols for ripple control systems |
| DIN ETS 300394-4-9-2000 |
地面主干线广播(TETRA).一致性试验规范.第4部分:直接运行模式(DMO)用协议试验规范.第9子部分:移动站(MS)网 |
Terrestrial Trunked Radio (TETRA) - Conformance testing specification - Part 4: Protocol testing specification for Direct Mode Operation (DMO); Sub-part 9: Abstract Test Suite (ATS) for Mobile Station (MS) Gateway (Endorsement of the English version ETS 3 |
| DIN EN 301129-2000 |
传输和多路复用(TM).数字无线中继系统(DRRS).同步数字分层体系(SDH),SDH-DRRS的系统性能参数的监测. |
Transmission and Multiplexing (TM) - Digital Radio Relay Systems (DRRS) - Synchronous Digital Hierarchy (SDH); system performance monitoring parameters of SDH DRRS (Endorsement of the English version EN 301129 V 1.1.2 (1999-05) as German standard) |
| DIN EN 301358-2000 |
卫星地面站和系统(SES).在19.7GHz至20.2GHz(空间对地面)和29.5GHz至30GHz(地面对空间)频带范围内运行的地球 |
Satellite Earth Stations and Systems (SES) - Satellite User Terminals (SUT) using satellites in geostationary orbit operating in the 19,7 GHz to 20,2 GHz (space-to-earth) and 29,5 GHz to 30 GHz (earth-to-space) frequency bands (Endorsement of the English? |
| DIN 950-2000 |
盘型手轮.圆型或正方形毂孔 |
Handwheels, dished - Hub hole round or straight square |
| DIN 3670-2000 |
盘形手轮 |
Hand wheels, disk type |
| DIN ISO 11268-2-2000 |
土壤质量.污染物对蚯蚓(恶臭蚯蚓)的影响.第2部分:测定对蚯蚓繁殖的影响 |
Soil quality - Effects of pollutants on earthworms (Eisenia Fetida) - Part 2: Determination of effects on reproduction (ISO 11268-2:1998) |
| DIN 53145-1-2000 |
纸和纸板的试验.测定反射系数用的基本参数.第1部分:无荧光试样的测量 |
Testing of paper and board - Basic parameters for determination of reflectance factor - Part 1: Measurements made on non-fluorescent specimens |
| DIN ISO 11451-4-2000 |
道路车辆.窄带辐射的电磁能量产生的电子干扰.车辆试验方法.第4部分:大容量电流注入（BCI) |
Road vehicles - Electrical disturbances by narrow-band radiated electromagnetic energy; vehicle test methods - Part 4: Bulk current injection (BCI) (ISO 11451-4:1995) |
| DIN EN 303-6-2000 |
采暖锅炉.第6部分：采用压力通风燃烧器的采暖锅炉.标称输入不超70kW雾化燃油燃烧器分节锅炉家庭热水运行的 |
Heating boilers - Part 6: Heating boilers with forced draught burners; specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW; German version EN 303-6:2000 |
| DIN ETS 300394-4-10-2000 |
地面集群无线电系统(TETRA).一致性检验规范.第4部分:直接运行方式(DMO)用协议检验规范.第10分部分:直接模式 |
Terrestrial Trunked Radio (TETRA) - Conformance testing specification - Part 4: Protocol testing specification for Direct Mode Operation (DMO); Sub-part 4-10: Abstract Test Suite (ATS) for Direct Mode Gateway (DM-GATE) (Endorsement of the English version? |
| DIN 10950-2-2000 |
感官分析.第2部分:基本原则 |
Sensory analysis - Part 2: Basic principles |
| DIN EN ISO 9360-1-2000 |
麻醉和呼吸设备.人体中增湿呼吸气体用热与湿度交换器(HMEs).第1部分:250ml最小呼吸气容积用的HMEs |
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml (ISO 9360-1:2000); German version EN ISO 9360-1:2000 |
| DIN V ENV 1997-3 Berichtigung 1-2000 |
DIN V ENV 1997-3-1999-10的勘误 |
Corrigendum to DIN V ENV 1997-3:1999-10 |
| DIN 15560-46-2000 |
电影摄影棚、电视演播室、舞台摄影用聚光灯.第46部分:夹持装置安全规定和试验 |
Spotlights for film and television studios, stages and photographic use - Part 46: Holding devices; safety regulations and testing |
| DIN 22112-1-2000 |
地下采媒用皮带输送机.支承辊.第1部分:尺寸 |
Belt conveyors for underground coal mining - Idlers - Part 1: Dimensions |
| DIN 25460-2000 |
高放射性物质操作屏蔽室用防火保护 |
Preventive fire protection for hot cells |
| DIN ISO 10242-2-2000 |
压力工具.冲头柄.第2部分:C型 |
Tools for pressing - Punch holder shanks - Part 2: Type C (ISO 10242-2:1991) |
| DIN ISO 10531-2000 |
包装.满装的运输包装.单元货物稳定性试验 |
Packaging - Complete, filled transport packages - Stability testing of unit loads (ISO 10531:1992) |
| DIN EN 209-2000 |
钢筒.最小容量为209升的可拆卸式盖(敞开式)筒; 德文版本 EN 209:1999 |
Steel drums - Removable head (open head) drums with a minimum capacity of 210 l; German version EN 209:1999 |
| DIN EN 210-2000 |
钢筒.最小总容量为216.5升的非拆卸式盖盖(密封式)筒; 德文版本 EN 210:1999 |
Steel drums - Non-removable head (tight head) drums with a minimum total capacity of 216,5 l; German version EN 210:1999 |
| DIN EN ISO 14031-2000 |
环境管理.环境性能评定.导则 |
Environmental management - Environmental performance evaluation - Guidelines (ISO 14031:1999); German version EN ISO 14031:1999 |
| DIN EN ISO 15480-2000 |
六角凸缘头自钻自攻螺钉 |
Hexagon washers head drilling screws with tapping screw thread (ISO 15480:1999); German version EN ISO 15480:1999 |
| DIN EN 295 Bb.1-2000 |
污水排放用陶土管和配件以及管连接件.标准和其它文献总目 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Survey on standards and other documents |
| DIN EN 356-2000 |
建筑物玻璃.安全玻璃.防人力攻击试验和分类 |
Glass in building - Security glazing - Testing and classification of resistance against manual attack; German version EN 356:1999 |
| DIN EN 300210-1-2000 |
综合业务数字网(ISDN).免费电话(FPH)补充业务.数字用户信令系统No.1(DSS1)协议.第1部分:协议规范 |
Integrated Services Digital Network (ISDN) - Freephone (FPH) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol - Part 1: Protocol specification (Endorsement of the English version EN 300210-1 V 1.2.4 (1998-06) as German S |
| DIN 25423-2-2000 |
大气放射性监控的取样方法.第2部分:从管道和烟囱取样的特殊要求 |
Sampling procedures for the monitoring of radioactivity in air - Part 2: Special requirements for sampling from air ducts and stacks |
| DIN ISO 5832-1-2000 |
外科植入物.金属材料.第1部分:锻造不锈钢 |
Implants for surgery - Metallic materials - Part 1: Wrought stainless steel (ISO 5832-1:1997) |
| DIN EN 846-11-2000 |
砖石工程辅助元部件试验方法.第11部分:门窗过梁尺寸和弯曲度测定 |
Methods of test for ancillary components for masonry - Part 11: Determination of dimensions and bow of lintels; German version EN 846-11:2000 |
| DIN EN 10241-2000 |
螺纹钢管 |
Steel threaded pipe; German version EN 10241:2000 |
| DIN EN 301259-2000 |
专用综合业务网(PISN).内部交换信令协议.专用综合网络交换(PINX)/时钟同步 |
Private Integrated Services Network (PISN) - Inter-exchange signalling protocol - Private Integrated Network eXchange (PINX) clock synchronization (ISO/IEC 15507 (1997), modified) (Endorsement of the English version EN 301259 V 1.1.1 (1998-10) as German s |
| DIN EN ISO 2738-2000 |
不包括硬金属的烧结金属材料.渗透性烧结金属材料.密度、油含量和开孔率的测定 |
Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999); German version EN ISO 2738:1999 |
| DIN EN ISO 10666-2000 |
自钻自攻螺钉.机械和功能特性 |
Drilling screws with tapping screw thread - Mechanical und functional properties (ISO 10666:1999); German version EN ISO 10666:1999 |
| DIN EN 60068-3-2-2000 |
环境试验.第3部分:背景资料.第2节:温度/低气压组合试验 |
Environmental testing - Part 3: Background information; section 2: Combined temperature/low air pressure tests (IEC 60068-3-2:1976); German version EN 60068-3-2:1999 |
| DIN EN 60317-53-2000 |
特种绕组线规格.第53部分:芳香聚酰胺薄带绕包扁铜线.温度指数220 |
Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220 (IEC 60317-53:1999); German version EN 60317-53:1999 |
| DIN EN ISO 182-2-2000 |
塑料.基于氯乙烯共聚物、均聚物的化合物及产物在高温下析出氯化氢和其它酸性产物的趋势测定.第2部分:pH值法 |
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 2: pH method (ISO 182-2:1990); German version? |
| DIN ISO 10069-1-2000 |
冲压工具.弹性体压缩弹簧.第1部分:总规范 |
Tools for pressing - Elastomer pressure springs - Part 1: General specification (ISO 10069-1:1991) |
| DIN EN ISO 15483-2000 |
十字槽半沉头自攻螺钉 |
Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999); German version EN ISO 15483:1999 |
| DIN ISO 2704-2000 |
道路车辆.M10×1平座火花塞及其汽缸盖安装孔 |
Road vehicles - M10 × 1 spark-plugs with flat seating and their cylinder head housings (ISO 2704:1998) |
| DIN EN ISO 15481-2000 |
十字槽盘头自钻自攻螺钉 |
Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999); German version EN ISO 15481:1999 |
| DIN ISO 11452-1-2000 |
道路车辆.窄带辐射电磁能电子干扰.部件试验方法.第1部分:总则和定义 |
Road vehicles - Electrical disturbances by narrow-band radiated electromagnetic energy; component test methods - Part 1: General and definitions (ISO 11452-1:1995) |
| DIN ISO 11452-2-2000 |
道路车辆.窄带辐射的电磁能量产生的电子干扰.部件试验方法.第2部分:吸波暗室 |
Road vehicles - Electrical disturbances by narrow-band radiated electromagnetic energy; component test methods - Part 2: Absorber lined chamber (ISO 11452-2:1995) |
| DIN ISO 10242-1-2000 |
压力工具.冲头柄.第1部分:A型 |
Tools for pressing - Punch holder shanks - Part 1: Type A (ISO 10242-1:1998) |
| DIN EN 1254-4 Berichtigung 1-2000 |
DIN EN 1254-4-1998的勘误 |
Corrigenda to DIN EN 1254-4:1998-03 (EN 1254-4:1998/AC:1999) |
| DIN EN 300210-2-2000 |
综合业务数字网(ISDN).免费电话(FPH)补充业务.数字用户用1号信令系统(DSS1)协议.第2部分:协议实现一致性声 |
Integrated Services Digital Network (ISDN) - Freephone (FPH) supplementary service - Digital Subcsriber Signalling System No. one (DSS1) protocol - Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification (Endorsement of the Eng |
| DIN EN 300210-4-2000 |
综合业务数字网(ISDN).免费电话(FPH)补充业务.数字用户用1号信令系统(DSS1)协议.第4部分:用户用抽象试验组( |
Integrated Services Digital Network (ISDN) - Freephone (FPH) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol - Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)? |
| DIN EN 12473-2000 |
海水中阴极保护的一般原理 |
General principles of cathodic protection in sea water; German version EN 12473:2000 |
| DIN EN 60455-2-2000 |
电器绝缘用树脂基反应化合物.第2部分:试验方法 |
Resin based reactive compounds used for electrical insulation - Part 2: Methods of test (IEC 60455-2:1998); German version EN 60455-2:1999 |
| DIN EN 301102-2000 |
专用综合业务网(PISN).作为按照内部-专用综合网交换(PINX)需要联接配对的电路模式基本业务和补充业务用户对 |
Private Integrated Services Network (PISN) - Mapping functions for the employment of a circuit mode basic service and the supplementary service user-to-user signalling as a pair of on-demand inter-PINX connections (Mapping/UUS) (Endorsement of the English |
| DIN EN 60870-6-702-2000 |
远程控制设备和系统.第6-702部分:与ISO标准和ITU-T推荐规范相一致的远程控制协议.在终端系统中提供TASE.2应 |
Telecontrol equipment and systems - Part 6-702: Telecontrol protocols compatible with ISO standards and ITU-T recommendations; functional profile for providing the TASE.2 application service in end systems (IEC 60870-6-702:1998); German version EN 60870-6 |
| DIN EN 60068-3-1-2000 |
环境试验.第3部分:背景资料.第1节:低温和干热试验 |
Environmental testing - Part 3: Background information; Section 1: Cold and dry heat tests (IEC 60068-3-1:1974 + IEC 60068-3-1A:1978); German version EN 60068-3-1:1999 |
| DIN EN 61069-7-2000 |
工业过程测量和控制.系统评估用系统性能的评定.第7部分:系统安全评估 |
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety (IEC 61069-7:1999); German version EN 61069-7:1999 |
| DIN EN 61069-8-2000 |
工业过程测量和控制.系统评估用系统性能的评定.第8部分:非任务相关系统特性的评估 |
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of non-task-related system properties (IEC 61069-8:1999); German version EN 61069-8:1999 |
| DIN EN 60601-2-7-2000 |
医用电气设备.第2-7部分:诊断X射线发生装置的高压发生器安全的特殊要求 |
Medical electrical equipment - Part 2-7: Particular requirements for the safety of high-voltage generators of diagnostic X-ray generators (IEC 60601-2-7:1998); German version EN 60601-2-7:1998 |
| DIN ISO 815-2000 |
硫化或热塑性橡胶.在环境温度、高温或低温下压缩永久变形的测定 |
Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures (ISO 815:1991 + ISO 815:1991/Cor.1:1993) |
| DIN EN 45510-7-1-2000 |
发电厂设备和系统购置指南.第7-1部分:管道系统和阀.高压管道系统 |
Guide for procurement of power station plant, equipment and systems - Part 7-1: Pipework and valves; high pressure piping systems; German version EN 45510-7-1:1999 |
| DIN EN 45510-7-2-2000 |
发电厂设备和系统购置指南.第7-2部分:管道系统和阀.锅炉和高压管路阀门 |
Guide for procurement of power station plant, equipment and systems - Part 7-2: Pipework and valves; boiler and high pressure piping valves; German version EN 45510-7-2:1999 |
| DIN ISO 10069-2-2000 |
压力工具.弹性体压缩弹簧.第2部分:附件规范 |
Tools for pressing - Elastomer pressure springs - Part 2: Specification of accessories (ISO 10069-2:1991) |
| DIN EN 60068-2-39-2000 |
环境试验.第2部分:试验.试验Z/AMD:低温、低气压和湿热组合顺序试验 |
Environmental testing - Part 2: Tests; test Z/AMD: Combined sequential cold, low air pressure and damp heat test (IEC 60068-2-39:1976); German version EN 60068-2-39:1999 |
| DIN EN ISO 1599-2000 |
塑料.乙酸纤维素.模塑时粘度降低的测定 |
Plastics - Cellulose acetate - Determination of viscosity loss on moulding (ISO 1599:1990); German version EN ISO 1599:1999 |
| DIN EN ISO 1680-2000 |
声学.测量旋转电机发射的空气噪声的试验规程 |
Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:1999); German version EN ISO 1680:1999 |
| DIN EN ISO 15482-2000 |
十字槽沉头自钻自攻螺钉 |
Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999); German version EN ISO 15482:1999 |
| DIN EN 846-5-2000 |
砖石工程辅助元部件试验方法.第5部分:墙拉杆抗拉荷载和抗压荷载能力及荷载位移特性测定(粗细相间沉积物试验 |
Methods of tests for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test); German version EN 846-5:2000 |
| DIN EN 45510-6-6-2000 |
发电厂设备采购指南.第6-6部分:涡轮机辅助设备、湿式和湿式/干燥冷却塔 |
Guide for procurement of power station equipment - Part 6-6: Turbine auxiliaries; wet and wet/dry cooling towers; German version EN 45510-6-6:1999 |
| DIN EN 60068-2-11-2000 |
环境试验.第2部分:试验.试验Ka:盐雾 |
Environmental testing - Part 2: Tests; test Ka: Salt mist (IEC 60068-2-11:1981); German version EN 60068-2-11:1999 |
| DIN EN 60068-2-13-2000 |
环境试验.第2部分:试验.试验M:低气压 |
Environmental testing - Part 2: Tests; test M: Low air pressure (IEC 60068-2-13:1983); German version EN 60068-2-13:1999 |
| DIN EN 45510-6-4-2000 |
发电厂设备购置指南.第6-4部分:涡轮机辅助设备和泵 |
Guide for procurement of power station equipment - Part 6-4: Turbine auxiliaries; pumps; German version EN 45510-6-4:1999 |
| DIN EN 60068-2-38-2000 |
环境试验.第2部分:试验.试验Z/AD:温度/湿度复合循环试验 |
Environmental testing - Part 2: Tests; test Z/AD: Composite temperature/humidity cyclic test (IEC 60068-2-38:1974); German version EN 60068-2-38:1999 |
| DIN EN 45510-6-8-2000 |
发电厂设备采购指南.第6-8部分:涡轮机辅助设备和起重机 |
Guide for procurement of power station equipment - Part 6-8: Turbine auxiliaries; cranes; German version EN 45510-6-8:1999 |
| DIN EN 45510-6-5-2000 |
发电厂设备购置指南.第6-5部分:涡轮机辅助设备和干燥冷却系统 |
Guide for procurement of power station equipment - Part 6-5: Turbine auxiliaries; dry cooling systems; German version EN 45510-6-5:1999 |
| DIN 743-2-2000 |
轴类.负载能力的计算.第2部分:理论应力集中因素和疲劳缺口因素 |
Shafts and axles, calculation of load capacity - Part 2: Theoretical stress concentration factors and fatigue notch factors |
| DIN 743-3-2000 |
轴类.负载能力的计算.第3部分:材料强度 |
Shafts and axles, calculation of load capacity - Part 3: Strength of materials |
| DIN EN 45510-6-9-2000 |
发电厂设备购置指南.第6-9部分:涡轮机辅设备和冷却水系统 |
Guide for procurement of power station equipment - Part 6-9: Turbine auxiliaries; cooling water systems; German version EN 45510-6-9:1999 |
| DIN 18148-2000 |
轻质混凝土空心壁板 |
Lightweight-concrete hollow-boards |
| DIN 18162-2000 |
轻质混凝土.无钢筋墙板 |
Lightweight concrete wallboards - unreinforced |
| DIN 51865-2-2000 |
气体燃料和其他气体的试验.汞含量的测定.第2部分:使用改进的林津纳(Lingener)燃烧法:原子吸收光谱测定法 (A |
Testing of gaseous fuels and other gases - Determination of mercury content - Part 2: Combustion using the modified Lingener method; Atomic absorption spectrometry (AAS) |
| DIN EN 12514-2-2000 |
油燃烧器供油系统的安装.第1部分:安全要求和试验.部件,阀门管道,过滤器,油气分离器,油量计 |
Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests; parts, valves pipes, filters, oil de-aerators, meters; German version EN 12514-2:2000 |
| DIN EN 12514-1-2000 |
油燃烧器供油系统的安装.第1部分:部件、供油泵、控制和安全装置及供油罐的安全要求和试验 |
Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests; parts, oil feed pumps, control and safety devices, supply tanks; German version EN 12514-1:2000 |
| DIN 28601-2000 |
延性铸铁管道和配件.螺纹套管接头.组件、套管、螺丝环、密封环和滑动环 |
Ductile iron pipes and fittings - Screwed socket joints - Assembly, sockets, screw rings, sealing rings and slip rings |
| DIN ETS 300298-1-2000 |
宽带综合业务数字网(B-ISDN).异步转移模式(ATM).第1部分:B-ISDN ATM的功能特性 |
Broadband Integrated Service Digital Network (B-ISDN) - Asynchronous Transfer Mode (ATM) - Part 1: B-ISDN ATM functional characteristics [ITU-T Recommendation I.150 (1995)] (Endorsement of the English version ETS 300298-1:1996 as German standard) |
| DIN EN 301171-2000 |
低比特率电信视频编码 |
Video coding for low bit rate communication [ITU-T Recommendation H.263 (1996)] (Endorsement of the English version EN 301171 V 1.1.1 (1998-07) as German standard) |
| DIN ETS 300478-1-2000 |
网络信号方式(NA).异步传送方式(ATM)上的无连接宽带数据服务(CBDS).在用户网络界面(UNI)的协议规范和框架. |
Network Aspects (NA) - Connectionless Broadband Data Service (CBDS) over Asynchronous Transfer Mode (ATM); framework and protocol specification at the User-Network Interface (UNI) - Part 1: Specification (Endorsement of the English version ETS 300478-1:19 |
| DIN ETS 300467-2000 |
宽带综合业务数字网(B-ISDN).在B-ISDN内和B-ISDN和其它网络之间帧中继互相配合的帧中继承载业务的支持 |
Broadband Integrated Services Digital Network (B-ISDN) - Support of Frame Relay Bearer Service (FRBS) in B-ISDN and frame relay interworking between B-ISDN and other networks (Endorsement of the English version ETS 300467:1998 as German standard) |
| DIN CWA 13849-5-2000 |
智能XFS接口规范.第5部分:智能XFS人员识别号便笺簿目标接口规范 |
ActiveXFS interface specification - Part 5: ActiveXFS PINPad object interface specification; English version CWA 13849-5:2000 |
| DIN ISO 603-13-2000 |
粘合磨料产品.尺寸.第12部分:在立式砂轮机上清理和去毛刺用砂轮 |
Bonded abrasives products - Dimensions - Part 13: Grinding wheels for deburring and fettling on a vertical grinder (ISO 603-13:1999) |
| DIN 10519-2000 |
食品卫生.未包装食物用的自助设备.卫生要求 |
Food hygiene - Self-service equipment for unpackaged food - Hygiene requirements |
| DIN 16524-6-2000 |
印刷技术用印刷品和油墨的检验.抗各种物理影响和化学影响.第6部分:暴露于热碱溶液的饮料瓶标签抗渗透和剥落 |
Testing of prints and inks for graphic technology - Resistance to various physical and chemical influences - Part 6: Behaviour of labels for beverage bottles on exposure to hot alkaline solution, resistance to penetration and come-off time |
| DIN 17052-1-2000 |
热处理炉.温度均匀性的要求 |
Heat treatment furnaces - Part 1: Requirements for temperature uniformity |
| DIN 6867-3-2000 |
医疗X射线照相用软片系列的感光测定.第3部分:乳腺X射线摄相感光曲线形状、速度和平均梯度的测定方法 |
Sensitometry of screen-film systems for medical radiography - Part 3: Method for determination of sensitometric curve shape, speed and average gradient for mammography |
| DIN 54401-2000 |
离子交换器试验(珠承型).取样 |
Testing of ion exchangers (bead form) - Sampling |
| DIN EN ISO 9241-13-2000 |
办公用视觉显示终端(VDTs)的人类工效学要求.第13部分:用户指南 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 13: User guidance (ISO 9241-13:1998); German version EN ISO 9241-13:1998 |
| DIN 18195-6-2000 |
建筑物的防水层.第6部分:防外挤压水和累积渗漏水的防水层.设计与施工 |
Water-proofing of buildings - Part 6: Water-proofing against outside pressing water and accumulating seepage water; design and execution |
| DIN ISO 8297-2000 |
声学.环境中声压级评定用多声源工业厂房声功率级的测定.工程法 |
Acoustics - Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment - Engineering method (ISO 8297:1994) |
| DIN EN 12414-2000 |
车辆停车控制设备.付款和售票机.技术和功能要求 |
Vehicle parking control equipment - Pay and display ticket machine - Technical and functional requirements; German version EN 12414:1999 |
| DIN EN 12774-2000 |
鞋靴.外底试验方法.剖层撕裂强度和分层阻力测定 |
Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance; German version EN 12774:1999 |
| DIN EN 12782-2000 |
鞋靴.鞋垫试验方法.线缝抗撕裂强度 |
Footwear - Test methods for insoles - Resistance to stitch tear; German version EN 12782:1999 |
| DIN 38405-32-2000 |
德国对水、废水和淤泥的标准检验方法.阴离子(D组).第32部分:原子吸收分光光谱法测定锑(D32) |
German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 32: Determination of antimony by atomic absorption spectrometry (D 32) |
| DIN EN ISO 13937-4-2000 |
纺织品.织物撕破特性.第4部分:舌型试件撕破强力的测定 |
Textiles - Tear properties of fabrics - Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test) (ISO 13937-4:2000); German version EN ISO 13937-4:2000 |
| DIN EN ISO 13937-3-2000 |
纺织品.织物的撕破特性.第3部分:翅型试件撕破强力的测定 |
Textiles - Tear properties of fabrics - Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) (ISO 13937-3:2000); German version EN ISO 13937-3:2000 |
| DIN ETS 300324-7-2000 |
数字本地交换(LE)的V-接口.接入网络(AN)支持用V5.1接口.第5部分:数据链接层的试验组结构和试验目的规范 |
V interfaces at the digital Local Exchange (LE) - V5.1 interface for the support of Access Network (AN) - Part 7: Test Suite Structure and Test Purposes (TSS&TP) specification for the data link layer as German standard) (Endorsement of the English version |
| DIN EN ISO 13702-2000 |
石油和天然气工业.海上生产设备着火和爆炸的控制和减弱.要求和指南 |
Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines (ISO 13702:1999); German version EN ISO 13702:1999 |
| DIN CWA 13849-12-2000 |
智能XFS接口规范.第12部分:智能XFS晚间安全目标接口规范 |
ActiveXFS interface specification - Part 12: ActiveXFS night safe object interface specification; English version CWA 13849-12:2000 |
| DIN CWA 13849-11-2000 |
智能XFS接口规范.第11部分:智能XFS文本终端目标接口规范 |
ActiveXFS interface specification - Part 11: ActiveXFS text terminal object interface specification; English version CWA 13849-11:2000 |
| DIN CWA 13849-10-2000 |
智能XFS接口规范.第10部分:智能XFS传感门和指示器目标接口规范 |
ActiveXFS interface specification - Part 10: ActiveXFS sensors doors and indicators object interface specification; English version CWA 13849-10:2000 |
| DIN CWA 13849-9-2000 |
智能XFS接口规范.第9部分:智能XFS银行存折打印机目标接口规范 |
ActiveXFS interface specification - Part 9: ActiveXFS passbook printer object interface specification; English version CWA 13849-9:2000 |
| DIN CWA 13849-6-2000 |
智能XFS接口规范.第6部分:智能XFS日记帐打印机目标接口规范 |
ActiveXFS interface specification - Part 6: ActiveXFS journal printer object interface specification; English version CWA 13849-6:2000 |
| DIN EN 60068-2-40-2000 |
环境试验.第2部分:试验.试验Z/AM:低温/低气压综合试验 |
Environmental testing - Part 2: Tests; test Z/AM: Combined cold/low air pressure tests (IEC 60068-2-40:1976 + A1:1983); German version EN 60068-2-40:1999 |
| DIN 15565-5-2000 |
电影和电视制作室用配电装置.第5部分:终端配电箱EV和照明配电箱LSV |
Electric power-distribution equipment for production workstations for film and television - Part 5: Final distribution box EV and light distribution boxes LSV |
| DIN EN 12784-2000 |
鞋靴.整鞋试验方法.隔热 |
Footwear - Test methods for whole shoe - Thermal insulation; German version EN 12784:1999 |
| DIN EN 61726-2000 |
电缆组件、电缆、连接器和无源微波元件.混响室法测量屏蔽衰减 |
Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method (IEC 61726:1999); German version EN 61726:2000 |
| DIN EN 61683-2000 |
光伏系统.功率调节器.效率测量程序 |
Photovoltaic systems - Power conditioners - Procedure for measuring efficiency (IEC 61683:1999); German version EN 61683:2000 |
| DIN EN 1546-4-2000 |
识别卡系统.内部电子钱包.第4部分:数据对象 |
Identification card systems - Inter-sector electronic purse - Part 4: Data objects; German version EN 1546-4:1999 |
| DIN 53238-13-2000 |
颜料和填料.分散特性评价法.第13部分:使用振动摇动机在低粘性媒介中的分散 |
Pigments and extenders - Method for assessment of ease of dispersion - Part 13: Dispersion in low viscous mediums using an oscillatory shaking machine |
| DIN 18860-1-2000 |
大型厨房设备.工作台.第1部分:开放工作台.要求和试验 |
Equipment for commercial kitchens - Working tables - Part 1: Open working tables; requirements and testing |
| DIN 58936-1-2000 |
实验室医学的质量管理.第1部分:基础术语 |
Quality management in laboratory medicine - Part 1: Basic terminology |
| DIN EN 300462-4-1-2000 |
传输和多路复用.同步网络的一般要求.第4-1部分:供同步数字体系(SDH)设备和准同步数字体系(PDH)设备实现同步 |
Transmission and Multiplexing (TM) - Generic requirements for synchronization networks - Part 4-1: Timing characteristics of slave clocks suitable for synchronization supply to Synchronous Digital Hierarchy (SDH) and Plesiochronous Digital Hierarchy (PDH) |
| DIN EN ISO 14111-2000 |
天然气.分析溯源性准则 |
Natural gas - Guidelines to traceability in analysis (ISO 14111:1997); German version EN ISO 14111:1999 |
| DIN EN 846-3-2000 |
砖石工程辅助元部件试验方法.第3部分:预制底层接缝加筋焊接抗剪载荷能力测定 |
Methods of tests for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement; German version EN 846-3:2000 |
| DIN 33403-2-2000 |
工作场所的气候及其环境.第2部分:气候对人类热平衡的影响 |
Climate at the workplace and in its environments - Part 2: Effect of the climate on the heat balance of human beings |
| DIN EN ISO 13937-1-2000 |
纺织品.织物撕破特性.第1部分:用冲击摆锤法测定撕破力 |
Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) (ISO 13937-1:2000); German version EN ISO 13937-1:2000 |
| DIN EN ISO 13937-2-2000 |
纺织品.织物撕破特性.第2部分:裤型试样撕破力的测定 |
Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (single tear method) (ISO 13937-2:2000); German version EN ISO 13937-2:2000 |
| DIN EN 60424-3-2000 |
铁氧体磁芯.表面缺陷性极限指南.第3部分:ETD磁芯和E磁芯 |
Ferrite cores - Guide on the limits of surface irregularities - Part 3: ETD-cores and E-cores (IEC 60424-3:1999); German version EN 60424-3:1999 |
| DIN EN 300301-1-2000 |
宽带综合业务数字网(B-ISDN).在宽带综合业务网内的交通管制和拥塞控制.可用比特速率(ABR)和ATM块传送(ABT) |
Broadband Integrated Services Digital Network (B-ISDN) - Traffic control and congestion control in B-ISDN - Conformance definitions for Available Bit Rate (ABR) and ATM Blocked Transfer (ABT) [ITU-T-Recommendation I.371.1 (1997)] (Endorsement of the Engli |
| DIN EN 300462-6-1-2000 |
传输和多路复用.同步网络的一般要求.第6-1部分:原始基准时钟的计时特性 |
Transmission and Multiplexing (TM) - Generic requirements for synchronization networks - Part 6-1: Timing characteristics of primary reference clocks (Endorsement of the English version EN 300462-6-1 V 1.1.1 (1998-05) as German standard) |
| DIN 18860-2-2000 |
商业厨房设备,工作台.第2部分:下部带柜子的工作台.要求和试验 |
Equipment for commercial kitchens - Working tables - Part 2: Working tables with substructures; requirements and testing |
| DIN EN 12007-3-2000 |
燃气供应系统.最大使用压力小于等于16bar的管道.第3部分:钢专用功能推荐规范 |
Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional recommendations for steel; German version EN 12007-3:2000 |
| DIN 32736 Bb.1-2000 |
建筑物管理.服务的定义和范围.服务的比较 |
Building Management - Definitions and scope of services - Comparison of services |
| DIN EN ISO 15098-3-2000 |
牙科镊子.第3部分:学院型 (ISO 15098-3:2000); 德文版本 EN ISO 15098-3:2000 |
Dental tweezers - Part 3: College types (ISO 15098-3:2000); German version EN ISO 15098-3:2000 |
| DIN EN ISO 15098-2-2000 |
牙科镊子.第2部分:梅利阿姆(Meriam)型 (ISO 15098-2:2000); 德文版本 EN ISO 15098-2:2000 |
Dental tweezers - Part 2: Meriam types (ISO 15098-2:2000); German version EN ISO 15098-2:2000 |
| DIN EN 60068-2-33-2000 |
环境试验.第2部分:试验.温度变化试验指南 |
Environmental testing - Part 2: Tests; guidance on change of temperature tests (IEC 60068-2-33:1971 + A1:1978); German version EN 6068-2-33:1999 |
| DIN EN 60068-2-48-2000 |
环境试验.第2部分:试验.模拟存储效果的IEC 60068试验应用指南 |
Environmental testing - Part 2: Tests; guidance on the application of the tests of IEC 60068 to simulate the effects of storage (IEC 60068-2-48:1982); German version EN 60068-2-48:1999 |
| DIN EN 60099-5-2000 |
电涌放电器.第5部分:选用推荐标准 |
Surge arresters - Part 5: Selection and application recommendations (IEC 60099-5:1996, modified + A1:1999); German version EN 60099-5:1996 + A1:1999 |
| DIN 45673-1-2000 |
机械振动.铁路轨道用弹性元件.第1部分:静态和动态特性的实验室测定 |
Mechanical vibration - Resilient elements used in railway tracks - Part 1: Laboratory determination of static and dynamic characteristics |
| DIN EN ISO 11737-2-2000 |
医疗器械的灭菌.微生物法.第2部分:灭菌方法验证中进行的无菌检验 |
Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the validation of a sterilization process (ISO 11737-2:1998); German version EN ISO 11737-2:2000 |
| DIN EN 1546-1-2000 |
识别卡系统.内部电子钱包.第1部分:定义,概念和结构.德文版本EN1546-1:1999 |
Identification card systems - Inter-sector electronic purse - Part 1: Definitions, concepts and structures; German version EN 1546-1:1999 |
| DIN V 86002-2000 |
船舶和海上技术.管道设备用符合DIN和DIN EN标准的铜合金的比较 |
Ships and marine technology - Comparison of copper alloys in accordance with DIN and DIN EN standards for pipeline equipment |
| DIN EN 10254-2000 |
闭锻的钢锻件.通用技术交货条件 |
Steel closed die forgings - General technical delivery conditions; German version EN 10254:1999 |
| DIN EN 300052-6-2000 |
综合业务数字网(ISDN).多用户号码辅助服务.数字用户用1号信令系统(DSSN1)协议.第6部分:网络用抽象试验组(AT |
Integrated Services Digital Network (ISDN) - Multiple Subscriber Number (MSN) supplementary service; digital Subscriber Signalling System No. one (DSS1) protocol - Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for |
| DIN EN 300377-1-2000 |
电信管理网络(TMN).V5接口和相关用户轮廓配置管理用本地交换(LE)用的Q3接口.第1部分:Q3接口规范 |
Telecommunications Management Network (TMN) - Q3 interface at the Local Exchange (LE) for configuration management of V5 interfaces and associated customer profiles - Part 1: Q3 interface specification (Endorsement of the English version EN 300377-1 V 1.2 |
| DIN ETS 300731-2000 |
电视系统.增强625线逐行倒相(PAL)制电视.PAL正相位 |
Television systems - Enhanced 625-line Phased Alternative Line (PAL) television - PALplus (Endorsement of the English version ETS 300731:1997 as German standard) |
| DIN EN 301029-7-2000 |
宽带综合业务数字网(B-ISDN).信令系统No.7.B-ISDN用户部分(B-ISUP).第7部分:ATM端系统地址 |
Broadband Integrated Services Digital Network (B-ISDN) - Signalling System No. 7; B-ISDN User Part (B-ISUP) - Part 7: ATM end system address [ITU-T Recommendation Q.2726.1 (1996)] (Endorsement of the English version EN 301029-7 V 1.1.3 (1998-10) as German |
| DIN EN 301029-3-2000 |
宽带综合业务数字网(B-ISDN).7号信号发送系统.B-ISDN用户部分(B-ISUP).第3部分:对统计比特率(SBR)附加交通 |
Broadband Integrated Services Digital Network (B-ISDN) - Signalling System No. 7; B-ISDN User Part (B-ISUP) - Part 3: Support of additional traffic parameters for Statistical Bit Rate (SBR), Available Bit Rate (ABR), ATM Block Transfer (ABT) and Quality o |
| DIN 18200-2000 |
建筑产品的一致性评估.认证机构对建筑产品的认证 |
Assessment of conformity for construction products - Certification of construction products by certification body |
| DIN ISO 603-5-2000 |
粘合磨料产品.尺寸.第5部分:表面磨削/平面磨削用砂轮 |
Bonded abrasives products - Dimensions - Part 5: Grinding wheels for surface grinding/face grinding (ISO 603-5:1999) |
| DIN ISO 603-4-2000 |
粘合磨料产品.尺寸.第4部分:平面磨削/外圆周磨砂轮 |
Bonded abrasives products - Dimensions - Part 4: Grinding wheels for surface grinding/peripheral grinding (ISO 603-4:1999) |
| DIN ISO 603-3-2000 |
粘合磨料产品.尺寸.第3部分:内圆磨砂轮 |
Bonded abrasives products - Dimensions - Part 3: Grinding wheels for internal cylindrical grinding (ISO 603-3:1999) |
| DIN ISO 603-2-2000 |
粘合磨料产品.尺寸.第2部分:无心外圆磨砂轮 |
Bonded abrasives products - Dimensions - Part 2: Grinding wheels for centreless external cylindrical grinding (ISO 603-2:1999) |
| DIN ISO 603-1-2000 |
粘合磨料产品.尺寸.第1部分:定心外圆磨砂轮 |
Bonded abrasives products - Dimensions - Part 1: Grinding wheels for external cylindrical grinding between centres (ISO 603-1:1999) |
| DIN EN ISO 8381-2000 |
奶基婴儿食品.脂肪含量测定.称重法(参照法) |
Milk-based infant foods - Determination of fat content - Gravimetric method (Reference method) (ISO 8381:2000); German version EN ISO 8381:2000 |
| DIN EN 13086-2000 |
铅及铅合金.氧化铅 |
Lead and lead alloys - Lead oxides; German version EN 13086:2000 |
| DIN ETS 300392-11-3-2000 |
地面主干线广播(TETRA).语音加数据(V+D).第11部分:补充服务2级.第3分部分:通话用户识别(TPI) (英文版本核准 |
Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 11: Supplementary services stage 2; Sub-part 3: Talking Party Identification (TPI) (Endorsement of the English version ETS 300392-11-3:1999 as German standard) |
| DIN EN ISO 4753-2000 |
紧固件.ISO米制外螺纹零件末端 |
Fasteners - Ends of parts with external metric ISO thread (ISO 4753:1999); German version EN ISO 4753:1999 |
| DIN EN ISO 7027-2000 |
水质.浊度的测定 |
Water quality - Determination of turbidity (ISO 7027:1999); German version EN ISO 7027:1999 |
| DIN 55957-2000 |
涂料和清漆用粘合剂.脂肪酸的甲基化和硅烷化及气相色谱法的分析 |
Binders for paints and varnishes - Methylation and silylation of fatty acids and analysis by gas chromatography |
| DIN ISO 7120-2000 |
石油产品和润滑剂.石油润滑油和其他液体.在含水情况下防锈性能的测定 |
Petroleum products and lubricants - Petroleum oils and other fluids - Determination of rust-preventing characteristics in the presence of water (ISO 7120:1987) |
| DIN EN 301199-2000 |
数字视频广播(DVB).本地多点分配系统(LMDS)的交互式信道. |
Digital Video Broadcasting (DVB) - Interaction channel for Local Multi-point Distribution Systems (LMDS) (Endorsement of the English version EN 301199 V 1.2.1 (1999-06) as German standard) |
| DIN ISO 2344-2000 |
道路车辆.M14×1.25锥座火花塞及其气缸盖安装孔 |
Road vehicles - M14 × 1,25 spark plugs with conical seating and their cylinder head housing (ISO 2344:1998) |
| DIN EN 60068-2-74-2000 |
环境试验.第2部分:试验,试验Xc：流体污染 |
Environmental testing - Part 2: Tests; test Xc: Fluid contamination (IEC 60068-2-74:1999); German version EN 60068-2-74:1999 |
| DIN EN 60059-2000 |
IEC标准电流额定值(IEC 60059:1999) |
IEC standard current ratings (IEC 60059:1999); German version EN 60059:1999 |
| DIN EN 1910-2000 |
木材、拼镶地板和木材镶板和包覆.尺寸稳定性测定 |
Wood and parquet flooring and wood panelling and cladding - Determination of dimensional stability; German version EN 1910:2000 |
| DIN EN 301029-10-2000 |
宽带综合业务数字网(B-ISDN).7号信号发送系统.B-ISDN用户部分(B-ISUP).第10部分:帧中继的支持 |
Broadband Integrated Services Digital Network (B-ISDN) - Signalling System No. 7; B-ISDN User Part (B-ISUP) - Part 10: Support of frame relay [ITU-T Recommendation Q.2727 (1996)] (Endorsement of the English version EN 301029-10 V 1.1.3 (1998-10) as German |
| DIN EN 301060-5-2000 |
综合业务数字网(ISDN).数字用户用1号信令系统(DSS1)协议.基本呼叫控制.虚拟专用网(VPN)用"b"业务入口点的增 |
Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No. one (DSS1) protocol; Basic call control; enhancement at the "b" service entry point for Virtual Private Network (VPN) applications - Part 5: Test Suite Structure and Tes |
| DIN EN 12227-1-2000 |
家用婴儿围栏.第1部分:安全要求 |
Playpens for domestic use - Part 1: Safety requirements; German version EN 12227-1:1999 |
| DIN EN 12227-2-2000 |
家用婴幼儿围栏.第2部分:试验方法 |
Playpens for domestic use - Part 2: Test methods; German version EN 12227-2:1999 |
| DIN EN 61803-2000 |
高压直流（HVDC)变流站功率损失的测定 |
Determination of power losses in high-voltage direct current (HVDC) converter stations (IEC 61803:1999 + Corrigendum 1999); German version EN 61803:1999 |
| DIN EN 1453-1-2000 |
建筑物内污物和废物排出(高温和低温)用承重墙管的塑料管道系统. 硬氯乙烯管(PVC-U).第1部分:管道和系统规范 |
Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system; German version EN 1453-1:2000 |
| DIN EN 818-6-2000 |
起重用短环节链.安全性.第6部分:链式吊索.生产商提供的用于使用和维修的信息规范 |
Short link chain for lifting purposes - Safety - Part 6: Chain slings; specification for information for use and maintenance to be provided by the manufacturer; German version EN 818-6:2000 |
| DIN EN ISO 15252-1-2000 |
塑料.环氧树脂模塑化合物(EP-PMCs).第1部分:命名系统和基本规范 |
Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 1: Designation system and basis for specifications (ISO 15252-1:1999); German version EN ISO 15252-1:1999 |
| DIN EN 12077-2-2000 |
起重机安全.健康和安全要求.第2部分:限制和指示装置 |
Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices; German version EN 12077-2:1998 |
| DIN EN ISO 1737-2000 |
淡炼乳和甜炼乳.脂肪含量测定.称重法(参照法) |
Evaporated milk and sweetened condensed milk - Determination of fat content - Gravimetric method (Reference method) (ISO 1737:1999); German version EN ISO 1737:1999 |
| DIN EN 12892-2000 |
铸造.用于失型铸造工艺的失型生产设备 |
Founding - Equipment for the production of lost patterns for the lost foam casting process; German version EN 12892:2000 |
| DIN 16874-2000 |
电缆输送管道用高密度聚乙烯(PE-HD)管道和配件.尺寸和技术交货条件 |
Pipes and fittings of high-density polyethylene (PE-HD) for cable ducting - Dimensions and technical delivery conditions |
| DIN EN 300823-2000 |
通用个人通信(UPT).UPT阶段2.UPT集成线路卡(ICC)和公共开关电话网络(PSTN)、综合业务数字网(ISDN)、移动通 |
Universal Personal Telecommunication (UPT) - UPT Phase 2 - Functional specification of the interface of a UPT Integrated Circuit Card (ICC) and Public Switched Telephone Network (PSTN), Integrated Services Digital Network (ISDN) and Global System for Mobi |
| DIN ETS 300298-2-2000 |
宽带综合业务数字网(B-ISDN).异步转移模式(ATM).第2部分:B-ISDN ATM层规范 |
Broadband Integrated Service Digital Network (B-ISDN) - Asynchronous Transfer Mode (ATM) - Part 2: B-ISDN ATM layer specification [ITU-T Recommendation I.361 (1995)] (Endorsement of the English version ETS 300298-2:1996 as German standard) |
| DIN EN 894-3-2000 |
机械安全性.设计显示和控制致动器时的人类工效学要求.第3部分:控制制动器 |
Safety of machinery - Ergonomic requirements for the design of displays and control actuators - Part 3: Control actuators; German version EN 894-3:2000 |
| DIN EN 1656-2000 |
化学消毒剂和防腐剂.评估兽医学领域用化学消毒剂和防腐剂杀菌作用的定量悬浮液试验.试验方法和要求(第2阶段 |
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary field - Test method and requirements (phase 2/step 1); German version EN 1656:20 |
| DIN EN 939-2000 |
饮用水处理用化学品.盐酸 |
Chemicals used for water intended for human consumption - Hydrochloric acid; German version EN 939:1999 |
| DIN EN 1015-12-2000 |
圬工用灰浆试验方法.第12部分:基底腻子和涂抹灰浆粘结强度测定 |
Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates; German version EN 1015-12:2000 |
| DIN EN 12495-2000 |
海上固定钢结构的阴极保护 |
Cathodic protection for fixed steel offshore structures; German version EN 12495:2000 |
| DIN EN ISO 505-2000 |
输送带.织物输送带抗撕裂强度的测定方法 |
Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts (ISO 505:1999); German version EN ISO 505:1999 |
| DIN ISO 6344-1-2000 |
砂布.粒度分析.第1部分:粒度分布试验 |
Coated abrasives - Grain size analysis - Part 1: Grain size distribution test (ISO 6344-1:1998) |
| DIN EN 1381-2000 |
木结构.试验方法.承重的钩环接合.德文版本EN1381:1999 |
Timber structures - Test methods - Load bearing stapled joints; German version EN 1381:1999 |
| DIN EN 60068-2-50-2000 |
环境试验.第2部分:试验.试验Z/AFc:散热和非散热试验样件的低温/振动(正弦)组合试验 |
Environmental testing- Part 2: Tests; tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens (IEC 60068-2-50:1983); German version EN 60068-2-50:1999 |
| DIN EN 1383-2000 |
木结构.试验方法.木制紧固件的楔入阻力 |
Timber structures - Test methods - Pull through resistance of timber fasteners; German version EN 1383:1999 |
| DIN EN 1382-2000 |
木结构.试验方法.木制紧固件的抗拔出力.德文版本EN1382-1999 |
Timber structures - Test methods - Withdrawel capacity of timber fasteners; German version EN 1382:1999 |
| DIN EN 50073-2000 |
可燃气体或氧气检测和测量用装置的选择、安装、使用和维护指南 |
Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen; German version EN 50073:1999 |
| DIN EN 10246-5-2000 |
钢管的无损检验.第5部分：铁磁无缝和焊接(埋弧焊接除外)钢管的纵向缺陷检测用自动全外周磁换能器检验/磁漏 |
Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections; German vers |
| DIN EN 10246-4-2000 |
钢管的无损检验.第4部分:铁磁无缝钢管横向缺陷检测用自动全外周磁换能器检验/磁漏检验 |
Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections; German version EN 10246-4:1999 |
| DIN EN 10246-3-2000 |
钢管的无损检验.第3部分:无缝和焊接钢管(埋弧焊接除外)缺陷检测的自动涡流试验.德文版本EN10246-3:1999 |
Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections; German version EN 10246-3:1999 |
| DIN EN ISO 4063-2000 |
焊接和相工艺.工艺名称和参照代码 |
Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:1998); German version EN ISO 4063:2000 |
| DIN EN 300210-5-2000 |
综合业务数字网(ISDN).免费电话(FPH)补充业务.数字用户用1号信令系统(DSS1)协议.第5部分:网络用试验组结构 |
Integrated Services Digital Network (ISDN) - Freephone (FPH) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol - Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network (Endorsement of the En |
| DIN EN 50136-1-4-2000 |
警报系统.警报传输系统和设备.第1-4部分:使用公共交换电话网络的声音通信器系统的要求 |
Alarm systems - Alarm transmission systems and equipment - Part 1-4: Requirements for systems with voice communicators using the public switched telephone network; German version EN 50136-1-4:1998 |
| DIN EN 397-2000 |
工业用安全头盔(包括修改件A1-2000) |
Industrial safety helmets (includes Amendment A1:2000); German version EN 397:1995 + A1:2000 |
| DIN CWA 13849-13-2000 |
智能XFS接口规范.第13部分:智能XFS打印机附件目标接口规范 |
ActiveXFS interface specification - Part 13: ActiveXFS printer auxiliary object interface specification; English version CWA 13849-13:2000 |
| DIN 51060-2000 |
耐火陶瓷原材料和耐火产品.耐火及高级耐火材料的术语定义 |
Refractory ceramic raw materials and refractories - Definitions of the terms refractory, high refractory |
| DIN 51418-2 Bb.1-2000 |
X射线光度法.X射线散射和X射线荧光分析(XRF).第2部分:定义和测量、校准及对结果评定的基本原理.附加信息和 |
X-ray spectrometry - X-Ray Emission- and X-ray Fluorescence analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results; additional information and examples of calculation |
| DIN EN ISO 10079-3-2000 |
医用吸引设备.第3部分:真空或用压力驱动的吸引设备 |
Medical suction equipment - Part 3: Suction equipment powered from a vacuum or pressure source (ISO 10079-3:1999); German version EN ISO 10079-3:1999 |
| DIN EN ISO 10079-2-2000 |
医用吸引设备.第2部分:手动吸引设备. |
Medical suction equipment - Part 2: Manually powered suction equipment (ISO 10079-2:1999); German version EN ISO 10079-2:1999 |
| DIN CWA 13849-7-2000 |
智能XFS接口规范.第7部分:智能XFS收据打印机目标接口规范 |
ActiveXFS interface specification - Part 7: ActiveXFS receipt printer object interface specification; English version CWA 13849-7:2000 |
| DIN 8181-2000 |
辊子链.双节距 |
Roller chains, double pitch |
| DIN EN 12944-2-2000 |
肥料和施用石灰材料.词汇.第2部分:与肥料有关的术语 |
Fertilizers and liming materials - Vocabulary - Part 2: Terms relating to fertilizers (including corrigendum AC:2000); German version EN 12944-2:1999 + AC:2000 |
| DIN EN 10273-2000 |
规定高温性能的压力容器用热轧可焊钢棒 |
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties; German version EN 10273:2000 |
| DIN EN 35-2000 |
单一上供水台架式坐浴盆.连接尺寸 |
Pedestal bidets over-rim supply only - Connecting dimensions; German version EN 35:2000 |
| DIN ISO 603-16-2000 |
粘合磨料产品.尺寸.第16部分:手持动力工具的切削砂轮 |
Bonded abrasives products - Dimensions - Part 16: Grinding wheels for cutting-off on hand held power tools (ISO 603-16:1999) |
| DIN ISO 603-15-2000 |
粘合磨料产品.尺寸.第15部分:固定或移动切割机上的切削砂轮 |
Bonded abrasives products - Dimensions - Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines (ISO 603-15:1999) |
| DIN ISO 603-14-2000 |
粘合磨料产品.尺寸.第12部分:在角度式砂轮机上清理和去毛刺用砂轮 |
Bonded abrasives products - Dimensions - Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder (ISO 603-14:1999) |
| DIN EN 60068-5-2-2000 |
环境试验.第5部分:试验方法起草指南.术语和定义 |
Environmental testing - Part 5: Guide to drafting of test methods; terms and definitions (IEC 60068-5-2:1990); German version EN 60068-5-2:1999 |
| DIN ISO 8694-2000 |
模具.带肩推杆 |
Tools for moulding - Shouldered ejector pins (ISO 8694:1998) |
| DIN EN 453-2000 |
食品加工机械.和面机.安全和卫生要求 |
Food processing machinery - Dough mixers - Safety and hygiene requirements; German version EN 453:2000 |
| DIN EN 61557-9-2000 |
可达1kV交流和1.5kV直流的低压配电系统的电气安全性.防护措施的试验、测量或监测设备.第9部分:IT系统绝缘失 |
Electrical safety in low voltage distribution systems up to 1 kV a.c. and 1,5 kV d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems (IEC 61557-9:1999); German versio |
| DIN EN 10276-1-2000 |
铁素体材料的化学分析.钢铁中氧含量的测定.第1部分:氧测定用钢样品的取样和制备 |
Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination; German version EN 10276-1:2000 |
| DIN EN 741-2000 |
连续装卸设备和系统.散装材料的气压装卸系统及其元部件的安全要求 |
Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials; German version EN 741:2000 |
| DIN 5412-11-2000 |
滚动轴承.圆柱滚柱轴承.第11部分:铁路车辆轴箱用单列,带保持架滚动轴承 |
Rolling bearings - Cylindrical roller bearings - Part 11: Single row, with cage, for railway vehicles axle boxes |
| DIN 5412-4-2000 |
滚动轴承.圆柱滚柱轴承.第2部分:提高精度的双列,带保持架的滚动轴承. |
Rolling bearings - Cylindrical roller bearings - Part 4: Double row, with cage, increased accuracy |
| DIN EN 10246-6-2000 |
钢管的无损检验.第6部分:无缝钢管横向缺陷探测的自动全周长超声波试验 |
Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections; German version EN 10246-6:1999 |
| DIN 50938-2000 |
铁和钢的黑色氧化涂层.要求和试验方法 |
Black oxide coatings on iron or steel - Requirements and test methods |
| DIN EN 301060-3-2000 |
综合业务数字网(ISDN).数字用户用1号信令系统(DSS1)协议.基本呼叫控制.虚拟专用网(VPN)用"b"业务入口点的增 |
Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No. one (DSS1) protocol; Basic call control; enhancement at the "b" service entry point for Virtual Private Network (VPN) applications - Part 3: Test Suite Structure and Tes |
| DIN EN 50286-2000 |
低压设备上工作用电绝缘防护服 |
Electrical insulating protective clothing for work on low-voltage installations; German version EN 50286:1999 |
| DIN 80010-3 Bb.1-2000 |
海上技术的直观显示性能.第3部分:运行状况、报警、应答.直观显示性能的范例 |
Visual display performance-marine technology - Part 3: Working conditions, alarms, acknowledgements; examples for visual display performance |
| DIN ETS 300479-2-2000 |
网络信号方式(NA).异步传送方式(ATM)上的无连接宽带数据服务(CBDS).网络节点接口(NNI)协议规范.第2部分:无 |
Network Aspects (NA) - Connectionless Broadband Data Service (CBDS) over Asynchronous Transfer Mode (ATM); protocol specification at the Network Node Interface (NNI) - Part 2: Connectionless Network Interface Protocol (CLNIP); Protocol Implementation Conf |
| DIN ETS 300479-1-2000 |
网络信号方式(NA).异步传送方式(ATM)上的无连接宽带数据服务(CBDS).网络节点接口(NNI)协议规范.第1部分:规 |
Network Aspects (NA) - Connectionless Broadband Data Service (CBDS) over Asynchronous Transfer Mode (ATM); protocol specification at the Network Node Interface (NNI) - Part 1: Specification (Endorsement of the English version ETS 300479-1:1998 as German s |
| DIN EN ISO 14526-1-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第1部分:命名体系及基本规范 |
Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14526-1:1999); German version EN ISO 14526-1:1999 |
| DIN EN ISO 12571-2000 |
建筑材料和产品湿热性能.吸湿性能测定 |
Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties (ISO 12571:2000); German version EN ISO 12571:2000 |
| DIN EN 300286-4-2000 |
综合业务数字网(ISDN).用户对用户信令(UUS)补充业务.数字用户用1号信令系统(DSS1)协议.第4部分:用户用抽象 |
Integrated Services Digital Network (ISDN) - User-to-User Signalling (UUS) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol - Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Te |
| DIN EN 300286-3-2000 |
综合业务数字网(ISDN).用户对用户信令(UUS)补充业务.数字用户用1号信令系统(DSS1)协议.第3部分:用户用试验 |
Integrated Services Digital Network (ISDN) - User-to-User Signalling (UUS) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol - Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user (Endorsemen |
| DIN EN 1380-2000 |
木结构.试验方法.承重的钉固接头.德文版本EN1380-1999 |
Timber structures - Test methods - Load bearing nailed joints; German version EN 1380:1999 |
| DIN EN 1251-2-2000 |
低温容器.容量不超过1000升的可移动的真空绝缘容器.第2部分:设计,制造,检验和试验.德文版本EN1251-2-2000 |
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing; German version EN 1251-2:2000 |
| DIN ETS 300800-2000 |
数字视频广播(DVB)系统.电缆TV分配系统(CATV)的DVB交互频道 |
Digital Video Broadcasting (DVB) - DVB interaction channel for cable TV distribution systems (CATV) (Endorsement of the English version ETS 300800:1998 as German standard) |
| DIN 1026-1-2000 |
热轧槽钢.第1部分：带斜度凸缘的槽钢.尺寸、质量和截面特性 |
Hot rolled steel channels - Part 1: Taper flange steel channels; dimensions, masses and sectional properties |
| DIN EN 1251-3-2000 |
低温容器.容量不超过1000升的可移动的真空绝缘容器.第3部分:操作要求.德文版本EN1251-3-2000 |
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 3: Operational requirements; German version EN 1251-3:2000 |
| DIN EN 1634-1-2000 |
门和百页门组件防火试验.第1部分:防火门和百页门 |
Fire resistance tests for door and shutter assemblies - Part 1: Fire doors and shutters; German version EN 1634-1:2000 |
| DIN EN 514-2000 |
门窗构架未增塑聚氯乙烯(PVC-U)型材.焊接角和T型连接强度测定. |
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the strength of welded corner and T-joint; German version EN 514:2000 |
| DIN EN 12814-6-2000 |
热塑性塑料半成品的焊接接头试验.第6部分:低温拉伸试验 |
Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test; German version EN 12814-6:2000 |
| DIN 6721-2-2000 |
数据处理用纸.连续式表格用40至90克/ 平方米纸.第2部分:自复制特性.试验方法 |
Papers for data processing - 40-g/m to 90 g/m paper for continuous forms - Part 2: Self-copying properties; test methods |
| DIN EN 12713-2000 |
标称容积为20升至60升的塑料容器用带有螺纹的盖子密封系统 |
Screw cap closure systems for plastics containers with a nominal capacity of 20 l to 60 l; German version EN 12713:2000 |
| DIN EN 50136-1-3-2000 |
警报系统.警报传输系统和设备.第1-3部分:使用公共交换电话网络的数字通信器系统的要求 |
Alarm systems - Alarm transmission systems and equipment - Part 1-3: Requirements for systems with digital communicators using the public switched telephone network; German version EN 50136-1-3:1998 |
| DIN EN 50136-1-2-2000 |
警报系统.警报传输系统和设备.第1-2部分:使用专用警报通路的系统要求 |
Alarm systems - Alarm transmission systems and equipment - Part 1-2: Requirements for systems using dedicated alarm paths; German version EN 50136-1-2:1998 |
| DIN EN 50136-2-3-2000 |
警报系统.警报传输系统和设备.第2-3部分:使用公共交换电话网络带数字通信器的系统中使用的设备的要求 |
Alarm systems - Alarm transmission systems and equipment - Part 2-3: Requirements for equipment used in systems with digital communicators using the public switched telephone network; German version EN 50136-2-3:1998 |
| DIN EN 12982-2000 |
工业阀门.铰链焊接端阀门端对端和中心对末端尺寸 |
Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves; German version EN 12982:2000 |
| DIN EN 12708-2000 |
额定容量为20升至225升的塑料容器塞子/桶盖封闭系统.德文版本EN 12708:2000 |
Plug/bung closure systems for plastic containers with nominal capacity of 20 l to 225 l; German version EN 12708:2000 |
| DIN ISO 6344-3-2000 |
砂布.粒度分析.第3部分:P240至P2500粗磨粒的粒度分布测定 |
Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P 240 to P 2500 (ISO 6344-3:1998) |
| DIN ISO 6344-2-2000 |
涂层磨料.粒度分析.第2部分:肉眼可见磨料为P12至P220的粒度分布测定 |
Coated abrasives - Grain size analysis - Part 2: Determination of grain size distribution of macrogrits P 12 to P 220 (ISO 6344-2:1998) |
| DIN 15538-1-2000 |
17.5mm和35mm磁胶片.第1部分:DIN标准胶片BF17A.BF17F和BF35A |
Magnetic film 17,5 mm and 35 mm - Part 1: DIN-reference films BF 17A, BF 17F and BF 35A |
| DIN EN 12802-2000 |
公路标记材料.识别用实验室方法:德文版本 EN 12802:2000 |
Road marking materials - Laboratory methods for identification; German version EN 12802:2000 |
| DIN 4160-2000 |
无静力作用地板砖 |
Bricks for floors, statically inactive |
| DIN EN 12711-2000 |
钢桶. 最小容积为230L的非活动桶盖(封闭端)的桶.德文版本12711:2000 |
Steel drums - Non-removable head (tight head) drums with a minimum capacity of 230 l; German version EN 12711:2000 |
| DIN 51866-1-2000 |
温度测量.第1部分:激光光谱学测量法的测量图 |
Temperature measurement - Part 1: Survey of laser spectroscopic methods |
| DIN EN 301195-2000 |
数字视频广播(DVB).通过移动通信全球系统(GSM)的互连频道 (英文版本核准本 EN 301195 V 1.1.3 (1999-02) 作 |
Digital Video Broadcasting (DVB) - Interaction channel through the Global System for Mobile communications (GSM) (Endorsement of the English version EN 301195 V 1.1.1 (1999-02) as German standard) |
| DIN EN 12702-2000 |
纸、纸板和包装用及一次性卫生产品用胶粘剂.潜在粘结层成块特性的测定.德文版本EN 12702:2000 |
Adhesives for paper and board, packaging and disposable sanitary products - Determination of blocking behaviour of potentially adhesive layers; German version EN 12702:2000 |
| DIN ISO 6936-2000 |
信息处理.ISO 646和ISO 6937-2编码字符集与国际电报电话咨询委员会(CITT)国际2号电报码(ITA2)之间的转换 |
Information processing - Conversion between the two coded character sets of ISO 646 and ISO 6937-2 and the CCITT international telegraph alphabet No. 2 (ITA 2) (ISO 6936:1988) |
| DIN ETS 300393-10-2000 |
地面主干线广播(TETRA).信息包数据优化(PDO).第10部分:空气界面(A1)的SDL模式 (英文版本核准本 ETS 300393- |
Terrestrial Trunked Radio (TETRA) - Packet Data Optimized (PDO) - Part 10: SDL model of Air Interface (AI) (Endorsement of the English version ETS 300393-10:1999 as German standard) |
| DIN EN 12712-2000 |
塑料液体容器.托板为800mm1200mm,1000mm1200mm和1140mm1140mm优化利用的标称容量为20升至60升的塑 |
Plastic jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilisation of pallets 800 mm × 1200 mm, 1000 mm × 1200 mm und 1140 mm × 1140 mm; German version EN 12712:2000 |
| DIN EN 10246-10-2000 |
钢管的无损检验.第10部分:缺陷探测用自动熔融电弧焊接钢管焊缝的射线照相检验 |
Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections; German version EN 10246-10:2000 |
| DIN EN 1463-2-2000 |
公路标记材料.后反射道路支柱杆.第2部分:公路试验性能规范.德文版本 EN 1463-2:2000 |
Road marking materials - Retroreflecting road studs - Part 2: Road test performance specifications; German version EN 1463-2:2000 |
| DIN EN 1871-2000 |
公路标记材料.物理性能;德文版本EN1871:2000 |
Road marking materials - Physical properties; German version EN 1871:2000 |
| DIN EN 1984-2000 |
工业阀门.钢门阀门 |
Industrial valves - Steel gate valves; German version EN 1984:2000 |
| DIN EN 12350-6-2000 |
新浇混凝土试验.第6部分:密度试验 |
Testing fresh concrete - Part 6: Density; German version EN 12350-6:1999 |
| DIN ETS 300392-10-23-2000 |
地面主干线广播(TETRA).语音加数据(V+D).第10部分:补充服务1级.第23分部分:无应答的呼叫结束 (英文版本核准 |
Terristrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 10: Supplementary services stage 1; Sub-part 23: Call completion on no reply (Endorsement of the English version ETS 300392-10-23:1999 as German standard) |
| DIN ETS 300392-10-3-2000 |
地面主干线广播(TETRA).语音加数据(V+D).第10部分:补充服务1级.第3子部分:通话用户识别(TPI) (英文版本核准 |
Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 10: Supplementary services stage 1; Sub-part 3: Talking Party Identification (TPI) (Endorsement of the English version ETS 300392-10-3:1999 as German standard) |
| DIN EN ISO 14744-4-2000 |
焊接.电子束焊接机的验收检验.第4部分:焊接速度的测量 |
Welding - Acceptance inspection of electron beam welding machines - Part 4: Measurement of welding speed (ISO 14744-4:2000); German version EN ISO 14744-4:2000 |
| DIN EN ISO 9241-17-2000 |
办公用视觉显示终端(VDTs)的人类工效学要求.第17部分:表格对话 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 17: Form filling dialogues (ISO 9241-17:1998); German version EN ISO 9241-17:1998 |
| DIN EN ISO 3382-2000 |
声学.参照其它声学参数测量房间混响时间 |
Acoustics - Measurement of the reverberation time of rooms with reference to other acoustical parameters (ISO 3382:1997); German version EN ISO 3382:2000 |
| DIN 59220-2000 |
扁平钢轧材.热轧花纹钢板.尺寸,重量,尺寸偏差,形状和质量 |
Flat products of steel - Hot rolled patterned plate - Dimensions, mass, tolerances on dimensions, shape and mass |
| DIN 30965-2000 |
激光技术.激光束淬透性试验 |
Laser engineering - Laser beam hardenability test |
| DIN EN ISO 772-2000 |
水文测量.词汇和符号 |
Hydrometric determinations - Vocabulary and symbols (ISO 772:1996); German version EN ISO 772:2000 |
| DIN EN 12709-2000 |
塑料桶. 标称容积为20升至120升的非活动桶盖(封闭盖)的圆桶 |
Plastic drums - Non-removable head (tight head) circular cross section drums with a nominal capacity of 20 l to 120 l; German version EN 12709:2000 |
| DIN EN 12714-2000 |
塑料桶.标称容积是25升至220升的活动桶盖(开放桶盖)的桶.德文版本EN12714:2000 |
Plastics drums - Removable head (open head) drums with a nominal capacity of 25 l to 220 l; German version EN 12714:2000 |
| DIN EN 301193-2000 |
数字视频广播(DVB).通过数字增强无绳通信(DETC)的互连频道 (英文版本核准本 EN 301193 V 1.1.3 (1998-07)? |
Digital Video Broadcasting (DVB) - Interaction channel through the Digital Enhanced Cordless Telecommunications (DECT) (Endorsement of the English version EN 301193 V 1.1.1 (1998-07) as German standard) |
| DIN 13-20-2000 |
ISO一般用途米制螺纹.第20部分:带优先公差级的粗牙螺纹的尺寸极限.公称直径1mm-68mm |
ISO general purpose metric screw threads - Part 20: Limits of sizes for coarse pitch threads with the prefered tolerance classes; nominal sizes from 1 mm to 68 mm |
| DIN EN 1957-2000 |
家具.床和床垫.功能特性测定的试验方法 |
Domestic furniture - Beds and mattresses - Test methods for the determination of functional characteristics; German version EN 1957:2000 |
| DIN V ENV 13420-2000 |
窗.不同气候下的性能.试验方法 |
Windows - Behaviour between different climates - Test method; German version ENV 13420:2000 |
| DIN EN 300417-3-2-2000 |
传输和多路复用(TM).设备传输功能性的一般要求.第3-2部分:同步传输模N(STM-N)再生器和多路传输层功能.实现 |
Transmission and Multiplexing (TM) - Generic requirements of transport functionality of equipment - Part 3-2: Synchronous Transport Module N (STM-N) regenerator and multiplex section layer functions; implementation Conformance Statement (ICS) proforma spe |
| DIN EN 301163-1-1-2000 |
宽带综合业务数字网络(B-ISDN).设备内异步传输方式(ATM)传输功能性的一般要求.第1-1部分:设备性能的功能特 |
Transmission and Multiplexing (TM) - Generic requirements of Asynchronous Transfer Mode (ATM) transport functionality within equipment - Part 1-1: Functional characteristics and equipment performance (Endorsement of the English version EN 301163-1-1 V 1.1 |
| DIN EN 301163-2-1-2000 |
宽带综合业务数字网络(B-ISDN).设备内异步传输方式(ATM)传输功能性的一般要求.第2-1部分:传输和层管理阶段 |
Transmission and Multiplexing (TM) - Generic requirements of Asynchronous Transfer Mode (ATM) transport functionality within equipment - Part 2-1: Functional model for the transfer and layer management plane (Endorsement of the English version EN 301163-2 |
| DIN 58371-2000 |
贮血冷藏柜.定义、要求和试验 |
Refrigerators for conserved blood - Definitions, requirements, testing |
| DIN 58920-2000 |
过滤器元件.液体的颗粒过滤.颗粒保持的特性 |
Filter elements - Particle filtration in fluids - Characterisation of the particle retention |
| DIN 53583-2007 |
颜料的测试.用粒状炭黑颜料的磨损测定精细成分和质量磨损 |
Testing of pigments - Determination of fines content and of loss in mass by abrasion of pelletized carbon black pigments |
| DIN 19534-3-2000 |
非压力地下排水和污水排放用带环形密封承口的硬聚氯乙烯(PVC-U)管和管件.第3部分:质量控制和安装 |
Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) with ring seal socket for non pressure underground drainage and sewerage - Part 3: Quality control and installation |
| DIN EN 301614-3-2000 |
数字增强无线远程通信(DECT).综合业务数字网(ISDN).中间系统配置用DECT/ISDN互连.第3部分:固定式无线电终端 |
Digital Enhanced Cordless Telecommunications (DECT) - Integrated Services Digital Network (ISDN); DECT/ISDN interworking for intermediate system configuration - Part 3: Profile Specific Test Specification (PSTS) for Fixed radio Termination (FT) (Endorseme |
| DIN EN 302096-2000 |
数字增强无线远程通信(DECT).无线终端移动性(CTM).特征软件包(FP1).CTM线路接转数据协议子集、32千位/秒和6 |
Digital Enhanced Cordless Telecommunications (DECT) - Cordless Terminal Mobility (CTM) - Feature Package 1 (FP1); CTM circuit-switched data profile, 32 kbit/s and 64 kbit/s unrestricted digital information (UDI) (Endorsement of the English version EN 3020 |
| DIN EN 301371-3-2000 |
数字增强无线远程通信(DECT).无线终端移动性(CTM).CTM存取协议子集(CAP).协议子集试验规范(PTS).第3部分:协 |
Digital Enhanced Cordless Telecommunications (DECT) - Cordless Terminal Mobility (CTM); CTM Access Profile (CAP); Profile Test Specification (PTS) - Part 3: Profile Specific Test Specification (PSTS); Fixed radio Termination (FT) (Endorsement of the Engli |
| DIN 18861-2-2000 |
商业厨房设备.洗碗设备和洗涤槽.第2部分:洗涤槽.要求和试验 |
Equipment for commercial kitchens - Dishwashing facilities and sinks - Part 2: Sinks; requirements and testing |
| DIN 18861-1-2000 |
商业厨房设备.洗碗设备和洗涤槽.第1部分:洗碗设备.要求和试验 |
Equipment for commercial kitchens - Dishwashing facilities and sinks - Part 1: Dishwashing facilities; requirements and testing |
| DIN ETS 300232-2000 |
传输和多路复用(TM).与同步数字层次有关的设备和系统的光学接口 |
Transmission and multiplexing (TM) - Optical interfaces for equipments and systems relating to the synchronous digital hierarchy (SDH) [ITU-T Recommendation G.957 (1995) modified] (Endorsement of the English version ETS 300232:1993 + A1:1996 as German sta |
| DIN EN 301003-2-2000 |
宽带综合业务数字网(B-ISDN).数字用户用2号信令系统(DSS2)协议.连接特性.由连接者修改的峰值信元速率.第2部 |
Broadband Integrated Services Digital Network (B-ISDN) - Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; peak cell rate modification by the connection owner - Part 2: Protocol Implementation Conformance Statement? |
| DIN 10477-2000 |
乳和乳制品的总灰分的测定 |
Determination of total ash of milk and milk products |
| DIN EN 1730-2000 |
家具.桌子.测定强度、寿命和稳定性的试验方法 |
Domestic furniture - Tables - Test methods for determination of strength, durability and stability; German version of EN 1730:2000 |
| DIN EN 12928-2000 |
总容积17l-230升的钢桶嵌入法兰式密封系统 |
Inserted flange type closure systems for steel drums with a total capacity of 17 l to 230 l; German version EN 12928:2000 |
| DIN ISO 525-2000 |
粘合磨料产品.一般要求 |
Bonded abrasive products - General requirements (ISO 525:1999) |
| DIN EN 846-2-2000 |
砖石工程辅助元部件试验方法.第2部分:灰缝中预制底层接缝加筋结合强度测定 |
Methods of tests for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints; German version EN 846-2:2000 |
| DIN EN 60099-1-2000 |
电涌放电器.第1部分:交流系统非线性电阻型间隙式电涌放电器 |
Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems (IEC 60099-1:1991 + A1:1999); German version EN 60099-1:1994 + A1:1999 |
| DIN EN 12821-2000 |
食品.高效液相色谱法测定维生素D.维生素D3和麦角骨化醇D2含量 |
Foodstuffs - Determination of vitamin D by high performance liquid chromatography - Measurement of cholecalciferol (D) and ergocalciferol (D); German version EN 12821:2000 |
| DIN EN ISO 1567-2000 |
牙科学-假牙基料聚合物 |
Dentistry - Denture base polymers (ISO 1567:1999); German version EN ISO 1567:2000 |
| DIN VDE 0580-2000 |
电磁装置和元件.通用规范 |
Electromagnetic devices and components - General specifications |
| DIN 50454-1-2000 |
半导体工艺材料的检验.Ⅲ-Ⅴ化合物单晶体错位的测定.第1部分:砷化镓 |
Testing of materials for semiconductor technology - Determination of dislocations in monocrystals of III-V-compound semi-conductors - Part 1: Gallium arsenide |
| DIN ETS 300298-3-2000 |
宽带综合业务数字网(B-ISDN). 异步传送方式(ATM).第3部分:协议实施一致语句(PICS)形式规范 |
Broadband Integrated Service Digital Network (B-ISDN) - Asynchronous Transfer Mode (ATM) - Part 3: Protocol Implementation Conformance Statement (PICS) proforma specification (Endorsement of the English version ETS 300298-3:1998 as German standard) |
| DIN EN 301614-1-2000 |
数字增强无线远程通信(DECT).综合业务数字网(ISDN).中间系统配置用DECT/ISDN互连.第1部分:协议子集试验规范 |
Digital Enhanced Cordless Telecommunications (DECT) - Integrated Services Digital Network (ISDN); DECT/ISDN interworking for intermediate system configuration - Part 1: Profile Test Specification (PTS) summary (Endorsement of the English version EN 301614 |
| DIN EN 301003-1-2000 |
宽带综合业务数字网(B-ISDN).数字用户用2号信令系统(DSS2)协议. 连接特性.连接处所有者最大信元速率改变.第 |
Broadband Integrated Services Digital Network (B-ISDN) - Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; peak cell rate modification by the connection owner - Part 1: Protocol specification [ITU-T Recommendation Q |
| DIN 70006-1-2000 |
车辆安全信号和路标.第1部分:商用车辆安全信号和路标 |
Safety signs and information signs for vehicles - Part 1: Safety and information signs for commercial vehicles |
| DIN EN 1191-2000 |
门窗.耐反复开关能力.试验方法 |
Windows and doors - Resistance to repeated opening and closing - Test method; German version EN 1191:2000 |
| DIN CWA 13873-2000 |
信息技术.ISO/IEC 10646-1的多语种欧洲子集 |
Information technology - Multilingual European Subsets in ISO/IEC 10646-1; English version CWA 13873:2000 |
| DIN EN 902-2000 |
饮用水处理用化学品.过氧化氢 |
Chemicals used for treatment of water intended for human consumption - Hydrogen peroxide; German version EN 902:1999 |
| DIN EN ISO 7393-1-2000 |
水质.游离氯和氯总含量测定.第1部分:使用N,N-二乙基-1,4-苯二胺的滴定法 |
Water quality - Determination of free chlorine and total chlorine - Part 1: Titrimetric method using N,N-diethyl-1,4-phenylenediamine (ISO 7393-1:1985); German version EN ISO 7393-1:2000 |
| DIN EN ISO 7393-2-2000 |
水质.游离氯和氯总含量测定.第2部分:为常规控制目的使用N,N-二乙基-1,4-苯二胺的比色法 |
Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-diethyl-1,4-phenylenediamine, for routine control purposes (ISO 7393-2:1985); German version EN ISO 7393-2:2000 |
| DIN 12847-2-2000 |
实验室玻璃器皿.血细胞计数器.刻度 |
Laboratory glassware - Haemacytometer counting chambers - Rulings |
| DIN EN 50125-1-2000 |
铁路设施.设备的环境条件.第1部分:机车车辆上的设备 |
Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock; German version EN 50125-1:1999 |
| DIN EN 301067-2-2000 |
宽带综合业务数字网(B-ISDN).数字用户用2号信令系统(DSS2)协议.连接特性.在呼叫/连接建立阶段的协商.第2部 |
Broadband Integrated Services Digital Network (B-ISDN) - Digital Subscriber Signalling System No. two (DSS2) protocol; connection characteristics; negotiation during call/connection establishment phase - Part 2: Protocol Implementation Conformance Stateme |
| DIN ETS 300396-8-3-2000 |
地面主干线广播(TETRA).直接运行模式(DMO)的技术要求.第8部分:协议执行一致性报告(PICS)形式规范.第3子部分 |
Terrestrial Trunked Radio (TETRA) - Technical requirements for Direct Mode Operation (DMO) - Part 8: Protocol Implementation Conformance Statement (PICS) proforma specification; Sub-part 3: Gateway Air Interface (AI) (Endorsement of the English version ET |
| DIN ETS 300393-2-2000 |
地面主干线广播(TETRA).信息包数据优化(PDO).第2部分:空气界面(A1) (英文版本核准本 ETS 300393-2:1999 作 |
Terrestrial Trunked Radio (TETRA) - Packet Data Optimized (PDO) - Part 2: Air Interface (AI) (Endorsement of the English version ETS 300393-2:1999 as German standard) |
| DIN 3016-3-2000 |
坚固夹.第3部分:分段紧固夹和凸缘尺寸 |
Fastening clamps - Part 3: Section clamps and flange dimensions |
| DIN ETS 300392-11-20-2000 |
地面主干线广播(TETRA).语音加数据(V+D).第11部分:补充服务2级.第20子部分:预估收听(DL) (英文版本核准本 E |
Terristrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 11: Supplementary Services stage 2; Sub-part 20: Discreet listening (DL) (Endorsement of the English version ETS 300392-11-20:1999 as German standard) |
| DIN ETS 300392-12-20-2000 |
地面主干线广播(TETRA).语音加数据(V+D).第12部分:补充服务3级.第20子部分:预估收听(DL) (英文版本核准本 E |
Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 12: Supplementary Services stage 3; Sub-part 20: Discreet Listening (DL) (Endorsement of the English version ETS 300392-12-20:1999 as German standard) |
| DIN EN 301273-2000 |
无线终端移动性(CTM).第2阶段.服务描述(英文版本核准本 EN 301273 V 1.1.3 (2000-01) 作为德国标准) |
Cordless Terminal Mobility (CTM) - Phase 2 - Service description (Endorsement of the English version EN 301273 V 1.1.3 (2000-01) as German standard) |
| DIN EN 12890-2000 |
铸造.砂模和砂芯生产用模型、砂芯盒和模型设备 |
Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores; German version EN 12890:2000 |
| DIN EN 12800-2000 |
鞋靴.鞋垫的试验方法.尺寸稳定性 |
Footwear - Test methods for insoles - Dimensional stability; German version EN 12800:2000 |
| DIN 15565-1-2000 |
电影和电视制作室用配电设备.第1部分:配电箱、电缆和连接器 |
Electric power-distribution equipment for production workstations for film and television - Part 1: Cases, cables and connectors |
| DIN IEC 60107-4-2000 |
电视广播接收机推荐测量方法.第4部分:双载波调频装置多声道电视接收机电气测量 |
Recommended methods of measurement on receivers for television broadcast transmissions - Part 4: Electrical measurements on multichannel sound television receivers using the two-carrier FM-system (IEC 60107-4:1988 + A1:1999) |
| DIN ISO 9022-3-2000 |
光学和光学仪器.环境试验方法.第3部分:机械应力 |
Optics and optical instruments - Environmental test methods - Part 3: Mechanical stress (ISO 9022-3:1998) |
| DIN 51302-2-2000 |
材料试验机.拉伸.加压和弯曲试验机的检验.建筑材料压力试验机的钩检验 |
Materials testing machines - Strain cylinder test method for compression testing machines for concrete |
| DIN 406-11 Bb.1-2000 |
技术制图.尺寸标注.第11部分:使用原理.空白图的初始处理 |
Technical drawings - Dimensioning - Part 11: Rules for the application; Initial treatment of blanks |
| DIN V ENV ISO 11133-1-2000 |
食品和动物饲料的微生物学.培养基的制备和生产指南.第1部分:实验室培养基制备质量保证的通用指南 |
Microbiology of food and animal feedings stuffs - Guidelines on preparation and production of culture media - Part 1: General guidelines on quality assurance for the preparation of culture media in the laboratory (ISO/TS 11133-1:2000); German version ENV? |
| DIN EN 12822-2000 |
食品.高效液相色谱法测定维生素E.α-、β-、γ-和δ-维生素E含量 |
Foodstuffs - Determination of vitamin E by high performance liquid chromatography - Measurement of -, -, - and -tocopherols; German version EN 12822:2000 |
| DIN EN 61599-2000 |
视盘播放器.测量方法 |
Videodisk players - Methods of measurement (IEC 61599:1999); German version EN 61599:1999 |
| DIN EN ISO 1854-2000 |
乳清干酪.脂肪含量测定.称重法(参照法) |
Whey cheese - Determination of fat content - Gravimetric method (Reference method) (ISO 1854:1999); German version EN ISO 1854:1999 |
| DIN 32984-2000 |
位于公共交通区的地面指示器 |
Ground surface indicators in public traffic areas |
| DIN EN 1533-2000 |
木和镶木地板.弯曲性能测定.试验方法 |
Wood and parquet flooring - Determination of bending properties - Test methods; German version EN 1533:2000 |
| DIN EN 301067-1-2000 |
宽带综合业务数字网(B-ISDN).数字用户用2号信令系统(DSS2)协议.连接特性.在呼叫/连接建立阶段的协商.第1部 |
Broadband Integrated Services Digital Network (B-ISDN) - Digital Subscriber Signalling System No. two (DSS2) protocol; connection characteristics; negotiation during call/connection establishment phase - Part 1: Protocol specification [ITU-T Q.2962 (1996) |
| DIN 4185-3-2000 |
筛面的术语和符号.第3部分:布状楔形金属丝筛网和网格 |
Terms and symbols for screening surfaces - Part 3: Cloth-like screens wedge wire screens and gratings |
| DIN 4185-2-2000 |
筛面的术语和符号.第2部分:冲孔板 |
Terms and symbols for screening surfaces - Part 2: Perforated plates |
| DIN EN 962-2000 |
移动式气瓶.工业和医疗气体瓶的阀门保护帽和阀盖.设计、制造和试验(包括修改件A1-1999和A2-2000) |
Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests (included amendment A1:1999 + A2:2000); German version EN 962:1996 + A1:1999 + A2:2000 |
| DIN 19010-3-2000 |
光电曝光计.第3部分:闪光灯曝光计 |
Photo-electric exposure meters - Part 3: Exposure meters for flash light |
| DIN EN 13009-2000 |
建筑材料和产品湿热性能.湿膨胀系数测定 |
Hygrothermal performance of building materials and products - Determination of hygric expansion coefficient; German version EN 13009:2000 |
| DIN EN ISO 14253-1 Bb.1-2000 |
几何尺寸规范(GPS).工件和测量设备测量检验.产品检验和测量设备校准.GPS测量不确定性估算指南 |
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO/TS 14253-2:1999) |
| DIN EN 10243-2-2000 |
钢模锻件.尺寸公差.第2部分:在平锻机上顶锻 |
Steel die forgings - Tolerances on dimensions - Part 2: Upset forgings made on horizontal forging machines; German version EN 10243-2:1999 |
| DIN EN 10243-1-2000 |
钢模锻件.尺寸公差.第1部分:落锤和立式压力机锻件 |
Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings; German version EN 10243-1:1999 |
| DIN EN 12946-2000 |
石灰材料.钙和镁含量的测定.络合方法 |
Liming materials - Determination of calcium content and magnesium content - Complexometric method; German version EN 12946:2000 |
| DIN 51400-4-2000 |
矿物油和燃料的试验.硫含量(总硫)的测定.第4部分:根据Lingener法的燃烧.视觉滴定,浊度计滴定 |
Testing of mineral oils and fuels - Determination of sulfur content (total sulfur) - Part 4: Combustion according to the Lingener method, visual titration, turbidmetric-titration |
| DIN 4159 Berichtigung 1-2000 |
对DIN 4159:1999-10的勘误 |
Corrigendum to DIN 4159:1999-10 |
| DIN 55608-2000 |
颜料和填充剂.水吸收值的测定 |
Pigments and extenders - Determination of water absorption value |
| DIN 15565-3-2000 |
电影和电视制作室用配电装置.第3部分:中间配电箱TK和开关盒SV |
Electric power-distribution equipment for production workstations for film and television - Part 3: Intermediate distribution box TK and switching box SV |
| DIN EN ISO 1600-2000 |
塑料.乙酸纤维素.利用加热的不同周期在模制样品生产中的光吸收量的测定 |
Plastics - Cellulose acetate - Determination of light absorption on moulded specimens produced using different periods of heating (ISO 1600:1990); German version EN ISO 1600:1999 |
| DIN EN 726-5-2000 |
识别卡系统.电信集成线路卡和终端.第5部分:付款方法 |
Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 5: Payment methods; German version EN 726-5:1999 |
| DIN EN 10246-12-2000 |
钢管的无损检验.第12部分:表面缺陷探测用无缝和焊接铁磁钢管的磁力探伤 |
Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections; German version EN 10246-12:2000 |
| DIN EN 10020-2000 |
钢的等级定义和划分 |
Definition and classification of grades of steel; German version EN 10020:2000 |
| DIN 22100-7-2000 |
用于矿井下合成的材料和物品.第7部分:安全要求,试验,标记 |
Articles and materials from synthetics for use in underground mines - Part 7: Safety requirements, testing, marking |
| DIN ISO 128-25-2000 |
技术制图.画法的一般原理.第25部分:造船绘图线 |
Technical drawings - General principles of presentation - Part 25: Lines on shipbuilding drawings (ISO 128-25:1999) |
| DIN EN 10246-2-2000 |
钢管的无损检验.第2部分:证明液压渗漏密封性的无缝和焊接(埋弧焊接除外)的奥氏体和铁素体/奥氏体钢管的自动 |
Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and ferritic-austenitic steel tubes for verification of hydraulic leak-tightness; German version EN 10246-2:200 |
| DIN ETS 300099-2000 |
综合业务数字网(ISDN).分组处理器接入点接口(PHI)规范 |
Integrated Services Digital Network (ISDN) - Specification of the Packet Handler access point Interface (PHI) (Endorsement of the English version ETS 300099:1998 as German standard) |
| DIN EN 61969-1-2000 |
电子设备机械构造.室外机壳.第1部分:设计导则 |
Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines (IEC 61969-1:1999); German version EN 61969-1:2000 |
| DIN EN 61969-2-1-2000 |
电子设备机械构造.室外机壳.第2-1部分:详细规范.机箱尺寸 |
Mechanical structures for electronic equipment - Outdoor enclosures - Part 2-1: Detail specification; dimensions for cabinets (IEC 61969-2-1:2000); German version EN 61969-2-1:2000 |
| DIN ETS 300072-2000 |
终端设备(TE).可视图文表示层协议.可视图文表示层数据语法 |
Terminal Equipment (TE) - Videotex presentation layer protocol - Videotex presentation layer data syntax (Endorsement of the English version ETS 300072:1990 + A1:1996 as German standard) |
| DIN ISO 9022-8-2000 |
光学和光学仪器.环境试验方法.第8部分:高压、低压及浸渍 |
Optics and optical instruments - Environmental test methods - Part 8: High pressure, low pressure, immersion (ISO 9022-8:1994) |
| DIN ISO 9022-9-2000 |
光学和光学仪器.环境试验方法.第9部分:太阳辐射 |
Optics and optical instruments - Environmental test methods - Part 9: Solar radiation (ISO 9022-9:1994) |
| DIN ISO 9022-10-2000 |
光学和光学仪器.环境试验方法.第10部分:正弦振动和干热或干冷组合 |
Optics and optical instruments - Environmental test methods - Part 10: Combined sinusoidal vibration and dry heat or cold (ISO 9022-10:1998) |
| DIN ISO 9022-11-2000 |
光学和光学仪器.环境试验方法.第11部分:霉菌生长 |
Optics and optical instruments - Environmental test methods - Part 11: Mould growth (ISO 9022-11:1994) |
| DIN EN 301614-2-2000 |
数字增强无线远程通信(DECT).综合业务数字网(ISDN).中间系统配置用DECT/ISDN互连.第2部分:协议子集特殊试验 |
Digital Enhanced Cordless Telecommunications (DECT) - Integrated Services Digital Network (ISDN); DECT/ISDN interworking for intermediate system configuration - Part 2: Profile Specific Test Specification (PSTS) - Portable radio Termination (PT) (Endorsem |
| DIN ISO 5832-3-2000 |
外科植入物.金属材料.第3部分:钛6-铝4-钒锻造合金 |
Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:1996) |
| DIN ISO 5832-2-2000 |
外科植入物.金属材料.第2部分:非合金钛 |
Implants for surgery - Metallic materials - Part 2: Unalloyed titanium (ISO 5832-2:1999) |
| DIN EN 1534-2000 |
木和镶木地板.耐压痕性测定(布氏硬度).试验方法 |
Wood and parquet flooring - Determination of resistance to indentation (Brinell) - Test method; German version EN 1534:2000 |
| DIN 4185-1-2000 |
筛面的术语和符号.第1部分:玻璃布筛 |
Terms and symbols for screening surface - Part 1: Woven cloth screens |
| DIN 50965-2000 |
电镀层.钢铁和铜及铜合金锡镀层 |
Electroplated coatings - Tin-coatings on iron steel and on copper and copper alloys |
| DIN 25420-3-2000 |
混凝土热室的建造.第3部分:对于不同密度混凝土墙上辐射防护窗的要求 |
Construction of concrete hot cells - Part 3: Requirements for shielding windows for concrete walls with different densities |
| DIN 25420-3 Bb.1-2000 |
混凝土热室的建造.第3部分:对于不同密度混凝土墙上辐射防护窗的要求.安装导则 |
Construction of concrete hot cells - Part 3: Requirements for shielding windows for concrete walls with different densities; installation guidelines |
| DIN 25420-4-2000 |
混凝土热室的建造.第4部分:对密度为2.3g/cm3的不同厚度混凝土墙上辐射防护窗的要求 |
Construction of concrete hot cells - Part 4: Requirements of shielding windows for concrete walls density 2,3 g/cm with different thicknesses |
| DIN EN ISO 1183-3-2000 |
塑料.非泡沫塑料的密度测定方法.第3部分:气体比重瓶法 |
Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999); German version EN ISO 1183-3:1999 |
| DIN EN 12350-4-2000 |
试验用新浇混凝土.第4部分:密实度等级 |
Testing fresh concrete - Part 4: Degree of compactability; German version EN 12350-4:1999 |
| DIN EN 1082-2-2000 |
防护服.防止被手持刀具割伤和刺伤用的手套和手臂护套.第2部分:非链环铠甲式的手套和手臂护套 |
Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 2: Gloves and arm guards made of material other than chain mail; German version EN 1082-2:2000 |
| DIN 55457-2-2000 |
包装试验.聚烯烃容器.抗应力开裂性.第2部分:压力温度程序 |
Packaging test - Containers made from polyolefines - Part 2: Tension cracking resistance; pressure-temperature procedure |
| DIN EN 12893-2000 |
铜和铜合金.螺旋延伸率数值的测定 |
Copper and copper alloys - Determination of spiral elongation number; German version EN 12893:2000 |
| DIN EN ISO 179-2-2000 |
塑料.摆锤冲击特性测定.第2部分:带测量仪器的冲击试验 |
Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997); German version EN ISO 179-2:1999 |
| DIN EN ISO 4614-2000 |
塑料.三聚氰胺--甲醛模塑件.可萃取的甲醛的测定 |
Plastics - Melamine-formaldehyde mouldings - Determination of extractable formaldehyde (ISO 4614:1977); German version EN ISO 4614:1999 |
| DIN EN ISO 4615-2000 |
塑料.不饱和聚酯和环氧树脂.氯总含量的测定 |
Plastics - Unsaturated polyesters and epoxide resins - Determination of total chlorine content (ISO 4615:1979); German version EN ISO 4615:1999 |
| DIN EN 12392-2000 |
铝和铝合金.锻造产品.压力设备生产装备特殊要求 |
Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment; German version EN 12392:2000 |
| DIN 85005-37-2000 |
船舶和海上技术.技术文件的图形符号.第37部分:照明配件 |
Ships and marine technology - Graphical symbols for technical documentation - Part 37: Lighting fittings |
| DIN EN 61595-3-2000 |
专业用多路数字声频磁带记录(DATR)系统.第3部分:16比特介质的24比特操作 |
Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use - Part 3: 24 bit operation for 16-bit media (IEC 61595-3:1999); German version EN 61595-3:1999 |
| DIN 10960-2000 |
感官分析用器具.葡萄酒试杯 |
Apparatus for sensory analysis - Wine testing glasses |
| DIN IEC 60706-6-2000 |
设备可维修性指南.第6部分:第9节:可维修性评价的统计方法 |
Guide on maintainability of equipment - Part 6: Section 9: Statistical methods in maintainability evaluation (IEC 60706-6:1994) |
| DIN EN 61993-1-2000 |
海上导航和无线电通信设备和系统.第1部分:使用甚高频数字选择呼叫(DSC)技术的船载自动发射机应答器系统安装 |
Maritime navigation and radiocommunication equipment and systems - Part 1: Shipborne automatic transponder system installation using VHF digital selective calling (DSC) techniques; operational and performance requirements, methods of testing and required? |
| DIN EN 10132-1-2000 |
热处理用冷轧窄钢带材.交货技术条件.第1部分:总则 |
Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 1: General; German version EN 10132-1:2000 |
| DIN EN 12350-5-2000 |
试验用新浇混凝土.第5部分:流动试验台试验 |
Testing fresh concrete - Part 5: Flow table test; German version EN 12350-5:1999 |
| DIN EN 60424-1-2000 |
铁氧体磁芯.表面缺陷极限指南.第1部分：通用规范 |
Ferrite cores - Guide on the limits of surface irregularities - Part 1: General specification (IEC 60424-1:1999); German version EN 60424-1:1999 |
| DIN EN ISO 13845-2000 |
塑料管道系统.用于硬聚氯乙烯(PVC-U)管道的弹性密封圈式承口连接件.内压下角度偏转密封试验方法 |
Plastics pipes systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2000); German version EN ISO? |
| DIN EN ISO 1401-2000 |
农业喷灌用橡胶软管 |
Rubber hoses for agricultural spraying (ISO 1401:1999); German version EN ISO 1401:1999 |
| DIN 616-2000 |
滚动轴承.尺寸.一般方案 |
Rolling bearings - Dimensions - General plan |
| DIN 38406-33-2000 |
德国对水、废水和淤泥的标准检验法.阳离子（Ｅ组）.第33部分:用原子吸收光谱仪测定锰含量(E33) |
German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 33: Determination of manganese by atomic absorption spectrometry (E 33) |
| DIN ETS 300142-2000 |
综合业务数字网(ISDN)和其它数字通信网络.非电话信号的线路传输.P64Kbit的音像业务视频代码 |
Integrated Services Digital Network (ISDN) and other digital telecommunications networks - Line transmission of non-telephone signals - Video codec for audiovisual services at p×64 kbits [ITU-T Recommendation H.261 (1993), modified] (Endorsement of the En |
| DIN ETS 300842-2000 |
宽带综合业务数字网(B-ISDN).异步传输模式(ATM)适配层(AAL).子层：专门提供面向连接的网络服务(CONS)协调功 |
Broadband Integrated Services Digital Network (B-ISDN) - ATM Adaptation Layer (AAL) - Sublayers: Service Specific Co-ordination Function (SSCF) to provide the Connection-Oriented Network Service (CONS) [ITU-T Recommendation I.365.2 (1995)] (Endorsement of |
| DIN ETS 300399-4-2000 |
帧中继业务.第4部分:宽带综合业务数字网.帧中继承载业务.业务定义 |
Frame relay services - Part 4: Broadband Integrated Services Digital Network (B-ISDN); frame relay bearer service; service definition (Endorsement of the English version ETS 300399-4:1998 as German Standard) |
| DIN EN 13087-2-2000 |
防护头盔.试验方法.第2部分:减震性 |
Protective helmets - Test methods - Part 2: Shock absorption; German version EN 13087-2:2000 |
| DIN EN 13087-1-2000 |
防护头盔.试验方法.第1部分:条件和状态调节 |
Protective helmets - Test methods - Part 1: Conditions and conditioning; German version EN 13087-1:2000 |
| DIN EN 1082-3-2000 |
防护服.防止匕首砍伤和扎伤的手套和胳膊护罩.第3部分:编织物、皮革和其它材料的冲击切割试验; 德文版本 EN? |
Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 3: Impact cut test for fabric, leather and other materials; German version EN 1082-3:2000 |
| DIN EN 12219-2000 |
门.气候影响.要求和分类 |
Doors - Climatic influences - Requirements and classification; German version EN 12219:1999 |
| DIN EN ISO 7328-2000 |
奶制食用冰和冰混合物配料.脂肪含量测定.称重法(参照法) |
Milk-based edible ices and ice mixes - Determination of fat content - Gravimetric method (Reference method) (ISO 7328:1999); German version EN ISO 7328:1999 |
| DIN EN 483-2000 |
集中供暖燃气锅炉;额定热输入不超过70KW的C型锅炉 |
Gas-fired central heating boilers; Type C boilers of nominal heat input not exceeding 70 kW; German version EN 483:1999 |
| DIN EN ISO 12020-2000 |
水的质量.铝的测定.原子吸收光谱法 |
Water quality - Determination of aluminium - Atomic absorption spectrometric methods (ISO 12020:1997); German version EN ISO 12020:2000 |
| DIN 10777-2-2000 |
咖啡和咖啡制品分析.咖啡碱含量测定.第2部分:HPLC快速法 |
Analysis of coffee and coffee products - Determination of coffeine content - Part 2: HPLC rapid method |
| DIN EN ISO 13844-2000 |
塑料管道系统.用于硬聚氯乙烯(PVC-U)管道的弹性密封圈式承口连接件.负压下密封试验方法 |
Plastics piping systems - Elastomeric sealing ring type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure (ISO 13844:2000); German version EN ISO 13844:2000 |
| DIN 51175-2000 |
釉瓷和搪瓷.用快速试验法测定热机械性能 |
Vitreous and porcelain enamels - Determination of thermomechanical properties by means of a rapid test method |
| DIN EN ISO 14526-2-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第2部分:试样的制备和性能的测定 |
Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999); German version EN ISO 14526-2:1999 |
| DIN 18195-4-2000 |
建筑物的防水层.第4部分:防地面潮气(毛细水、存留水)和地板下及墙上非累积渗漏水的防水层的设计和施工 |
Water-proofing of buildings - Part 4: Water-proofing against ground moisture (capillary water, retained water) and non-accumulating seepage water under floor slabs and on walls, design and execution |
| DIN ISO 11259-2000 |
土壤质量.土壤的简单描述 |
Soil quality - Simplified soil description (ISO 11259:1998) |
| DIN EN ISO 14527-1-2000 |
塑料.脲醛和脲/蜜胺酚醛粉末模塑化合物(UF-和UF/MF-PMCs).第1部分:名称体系和基本规范 |
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14527-1:1999); German version EN ISO 14527-1:1999 |
| DIN EN ISO 14526-3-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第3部分:对所选模塑化合物的要求 |
Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14526-3:1999); German version EN ISO 14526-3:1999 |
| DIN EN ISO 14529-2-2000 |
塑料.蜜胺/酚醛粉末模塑化合物(MP-PMCs).第2部分:试样的制备和特性的测定 |
Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999); German version EN ISO 14529-2:1999 |
| DIN ISO 12132-2000 |
滑动轴承.薄壁轴瓦的质量保证.设计中的失效形式和影响分析（FMEA） |
Plain bearings - Quality assurance of thin-walled half-bearings - Design FMEA (ISO 12132:1999) |
| DIN ISO 13778-2000 |
滑动轴承.薄壁轴瓦的质量保证.选配法获得小间隙 |
Plain bearings - Quality assurance of thin-walled half bearings - Selective assembly of bearings to achieve a narrow clearance range (ISO 13778:1999) |
| DIN EN 13087-3-2000 |
防护头盔.试验方法.第3部分:耐渗透性 |
Protective helmets - Test methods - Part 3: Resistance to penetration; German version EN 13087-3:2000 |
| DIN 3016-1-2000 |
紧固夹.第1部分:带舌板 |
Fastening clamps - Part 1: With tongue |
| DIN 3016-2-2000 |
坚固夹.第2部分:带紧固突耳 |
Fastening clamps - Part 2: With fastening lugs |
| DIN EN 81-2-2000 |
升降机建造和安装的安全规则.第2部分:液压升降机 |
Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts (includes corrigendum AC:1999); German version EN 81-2:1998 + AC:1999 |
| DIN EN 81-1-2000 |
升降机建造和安装的安全规则.第1部分:电动升降机 |
Safety rules for the construction and installation of lifts - Part 1: Electric lifts (includes Corrigendum AC:1999); German version EN 81-1:1998 + AC:1999 |
| DIN EN ISO 10075-2-2000 |
与心理负荷有关的人类工效学原则.第2部分:设计原则 |
Ergonomic principles related to mental workload - Part 2: Design principles (ISO 10075-2:1996); German version EN ISO 10075-2:2000 |
| DIN EN 12154-2000 |
幕墙.防水性.性能要求和分类 |
Curtain walling - Watertightness - Performance requirements and classification; German version EN 12154:1999 |
| DIN EN 1491-2000 |
建筑物阀门.膨胀阀门.试验和要求 |
Building valves - Expansions valves - Tests and requirements; German version EN 1491:2000 |
| DIN EN 1490-2000 |
建筑物阀门.组合型温度压力安全阀.试验和要求 |
Building valves - Combined temperature and pressure relief valves - Tests and requirements; German version EN 1490:2000 |
| DIN 66303-2000 |
信息技术.8-比特代码 |
Information technology - 8 bit code |
| DIN ISO 171-2000 |
塑料.模塑材料体积系数的测定 |
Plastics - Determination of bulk factor of moulding materials (ISO 171:1980) |
| DIN EN 1489-2000 |
建筑物阀门.压力安全阀门.试验和要求 |
Building valves - Pressure safety valves - Tests and requirements; German version EN 1489:2000 |
| DIN EN 1487-2000 |
建筑物阀门.液压安全类.试验和要求 |
Building valves - Hydaulic safety groups - Tests and requirements; German version EN 1487:2000 |
| DIN EN ISO 2495-2000 |
铁蓝颜料.规范和试验方法 |
Iron blue pigments - Specifications and methods of test (ISO 2495:1995); German version EN ISO 2495:2000 |
| DIN 623-2-2000 |
滚动轴承.基本原理.第2部分:滚动轴承的图样画法 |
Rolling bearings - Fundamental principles - Part 2: Graphical representation of rolling bearings |
| DIN EN 13087-6-2000 |
防护头盔.试验方法.第6部分:视觉范围 |
Protective helmets - Test methods - Part 6: Field of vision; German version EN 13087-6:2000 |
| DIN EN 326-2-2000 |
木质板.取样.切割和检验.第2部分:工厂质量控制 |
Wood-based panels - Sampling, cutting and inspection - Part 2: Quality control in the factory; German version EN 326-2:2000 |
| DIN EN 62056-31-2000 |
电量测量.抄表、电费和负荷控制的数据交换.第31部分:带载波信令的双绞线局域网的使用 |
Electricity metering - Data exchange for meter reading, tariff and load control - Part 31: Use of local area networks on twisted pair with carrier signalling (IEC 62056-31:1999); German version EN 62056-31:2000 |
| DIN EN 1920-2000 |
可移动气瓶.压缩气体（不包括乙炔)用气瓶.填充时的检查 |
Transportable gas cylinders - Cylinders for compressed gases (excluding acetylene) - Inspection at time of filling; German version EN 1920:2000 |
| DIN EN 12536-2000 |
焊接耗材.非合金钢和抗蠕变钢的气体焊接用焊条.分类 |
Welding consumables - Rods for gas welding of non alloy and creep-resisting steels - Classification; German version EN 12536:2000 |
| DIN EN 61300-2-24-2000 |
光纤互联装置和无源部件.基本试验和测量程序.第2-24部分:陶瓷定向裂纹应力筛选试验 |
Fibre optic interconnecting devices and passive components; basic test and measurement procedures - Part 2-24: Tests; screen testing of ceramic alignment split sleeve by stress application (IEC 61300-2-24:1999); German version EN 61300-2-24:2000 |
| DIN EN 846-7-2000 |
砖石工程辅助元部件试验方法.第7部分:剪应拉杆和滑动拉杆抗剪载荷能力及荷载位移特性测定(灰缝连接的粗细粒 |
Methods of tests for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couple test for mortar joint connections); German version EN 846-7:2000 |
| DIN EN ISO 9241-12-2000 |
办公室用视觉显示终端(VDTs)的人类工效学要求.第12部分:信息表示 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 12: Presentation of information (ISO 9241-12:1998); German version EN ISO 9241-12:1998 |
| DIN 16892-2000 |
交联聚乙烯(PE-X)管.一般要求和试验 |
Crosslinked polyethylene (PE-X) pipes - General requirements, testing |
| DIN EN 13056-2000 |
内河航船.倾斜度30度至45度的扶梯.要求和类型 |
Inland navigation vessels - Stairs with inclination angles of 30° to 45° - Requirements, types; German version EN 13056:2000 |
| DIN 38407-7-2000 |
德国对水、废水和淤泥的标准检验方法.公共可测物质(F组).第7部分:用高效薄层色谱法(HPTLC)测定饮用水和矿物 |
German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 7: Determination of six polycyclic aromatic hydrocarbons (PAH) in drinking and mineral water by high performance thin layer chr |
| DIN EN 300347-2-2000 |
数字式本地交换的V接口.用于支持接入网络的V5.2接口.第2部分:协议实现一致性声明(PICS）形式规范 |
V interfaces at the digital Local Exchange (LE) - V5.2 interface for the support of Access Network (AN) - Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification (Endorsement of the English version EN 300347-2 V 2.1.3 (1999-12) |
| DIN EN 12605-2000 |
工业、商用和车库门和大门.机械性能试验方法 |
Industrial, commercial and garage doors and gates - Mechanical aspects - Test methods; German version EN 12605:2000 |
| DIN ETS 300347-7-2000 |
数字本地交换(LE)的V-接口.接如网络(AN)支持用V5.2接口.第7部分:数据链接层的试验组结构和试验目的规范 |
V interfaces at the digital Local Exchange (LE) - V5.2 interface for the support of Access Network (AN) - Part 7: Test Suite Structure and Test Purposes (TSS&TP) specification for the data link layer (Endorsement of the English version ETS 300347-7:1999 a |
| DIN EN ISO 175-2000 |
塑料.测定液体化学品对塑料影响的试验方法 |
Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:1999); German version EN ISO 175:2000 |
| DIN 18319-2000 |
建筑工程承包条例.第C部分:建筑工程通用技术规范.管道掘进工程 |
Contract procedures for building works - Part C: General technical specifications for building works; Pipe drilling works |
| DIN EN 300403-1-2000 |
综合业务数字网络(ISDN).数字用户用1号信令系统协议(DSS1).电路模式基本呼叫控制的信令网络层.第1部分:协议 |
Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control - Part 1: Protocol specification [ITU-T-Recommendation Q.931 (1993), modified] (Endorse |
| DIN EN 300417-4-2-2000 |
传输和多路复用(TM).设备传输功能性一般要求.第4-2部分:同步数字系列(SDH)路径层功能.执行一致性声明(ICS) |
Transmission and Multiplexing (TM) - Generic requirements of transport functionality of equipment - Part 4-2: Synchronous Digital Hierarchy (SDH) path layer functions; Implementation Conformance Statement (ICS) proforma specification (Endorsement of the E |
| DIN EN 12484-3-2000 |
灌溉技术.自动草坪灌溉系统.第3部分:自动控制和系统管理 |
Irrigation techniques - Automatic turf irrigation systems - Part 3: Automatic control and system management; German version EN 12484-3:2000 |
| DIN EN 300497-5-2000 |
数字增强无线远程通信(DECT).通用接口(CI).试验实例库(TCL).第5部分:抽象试验序列(ATS);数据链接控制(DLC) |
Digital Enhanced Cordless Telecommunications (DECT) - Common Interface (CI); Test Case Library (TCL) - Part 5: Abstract Test Suite (ATS); Data Link Control (DLC) layer (Endorsement of the English version EN 300497-5 V 0.3.0 (1999-10) as German standard) |
| DIN EN 60068-2-57-2000 |
环境试验.第2部分:试验,试验Ff:振动.时间历程法 |
Environmental testing - Part 2: Tests; test Ff: Vibration, time-history method (IEC 60068-2-57:1999); German version EN 60068-2-57:2000 |
| DIN EN 12889-2000 |
排水管和污水管非埋设施工和试验 |
Trenchless construction and testing of drains and sewers; German version EN 12889:2000 |
| DIN 25412-2-2000 |
实验室设备.手套箱.第2部分:泄漏试验 |
Laboratory equipment - Gloves boxes - Part 2: Leakage test |
| DIN 50934-4-2000 |
金属腐蚀.水处理设备腐蚀防护效果的评估方法.第4部分:在结垢水装置中去除腐蚀物的试验室腐蚀试验 |
Corrosion of metals - Methods for evaluation of efficiency of water treatment apparatus for corrosion protection - Part 4: Laboratory corrosion test for removal of corrosion products in incrusted water installations |
| DIN EN 846-6-2000 |
砖石工程辅助元部件试验方法.第6部分:墙拉杆抗拉荷载和抗压荷载能力及荷载位移特性测定(单端试验) |
Methods of tests for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test); German version EN 846-6:2000 |
| DIN EN ISO 6945-2000 |
橡胶软管.外覆层耐磨性的测定 |
Rubber hoses - Determination of abrasion resistance of the outer cover (ISO 6945:1991) (including Amendment A1); German version EN ISO 6945:1996 + A1:2000 |
| DIN 10121-2000 |
利用荧光免疫测定法检测带酵素食品中的沙门氏菌属 |
Detection of Salmonella in foodstuffs with enzyme linked fluorescent immuno-assay |
| DIN EN 13193-2000 |
包装.包装和环境.术语 |
Packaging - Packaging and environment - Terminology; German version EN 13193:2000 |
| DIN EN ISO 14530-1-2000 |
塑料.不饱和聚酯粉末模塑化合物(UP-PMCs).第1部分:命名体系和基础规范 |
Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 1: Designation system and basis for specifications (ISO 14530-1:1999); German version EN ISO 14530-1:1999 |
| DIN EN ISO 14529-3-2000 |
塑料.蜜胺/酚醛粉末模塑化合物(MP-PMCs).第3部分:对选择的模塑化合物的要求 |
Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14529-3:1999); German version EN ISO 14529-3:1999 |
| DIN EN 60068-2-51-2000 |
环境试验.第2部分:试验.试验Z/BFc:散热和非散热试验样件的干热/振动(正弦)组合试验 |
Environmental testing - Part 2: Tests; tests Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens (IEC 60068-2-51:1983); German version EN 60068-2-51:1999 |
| DIN EN ISO 13565-3-2000 |
产品几何量规范(GPS).表面结构:轮廓法.具有分层功能特性的表面.第3部分:利用材料的概率曲线描述高度特性 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve (ISO 13565-3:1998); German version EN ISO 13565-3:2000 |
| DIN EN 12604-2000 |
工业、商用和车库门和大门.机械性能要求 |
Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements; German version EN 12604:2000 |
| DIN CWA 13849-4-2000 |
智能XFS接口规范.第4部分:智能XFS储存所目标接口规范 |
ActiveXFS interface specification - Part 4: ActiveXFS depository object interface specification; English version CWA 13849-4:2000 |
| DIN EN ISO 9997-2000 |
牙科卡式注射器(ISO 9997:1999);德文版本 EN ISO 9997:1999 |
Dental cartridge syringes (ISO 9997:1999); German version EN ISO 9997:1999 |
| DIN ISO 5832-8-2000 |
外科植入物.金属材料.第8部分:锻制钴镍铬钼钨铁合金 |
Implants for surgery - Metallic materials - Part 8: Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy (ISO 5832-8:1997) |
| DIN ISO 5832-4-2000 |
外科植入物.金属材料.第4部分:钴铬钼铸造合金 |
Implants for surgery - Metallic materials - Part 4: Cobalt-chromium-molybdenum casting alloy (ISO 5832-4:1996) |
| DIN 8080-2000 |
氯化聚氯乙烯(PVC-C)管PVC-C 250.一般质量要求和检验 |
Chlorinated polyvinyl chloride (PVC-C) pipes PVC-C 250 - General quality requirements, testing |
| DIN ISO 13567 Bb.1-2000 |
技术产品文件.CAD图层的编排和命名.第3部分:ISO 13567-1和ISO-13567-2的应用 |
Technical product documentation - Organization and naming of layers for CAD - Application of ISO 13567-1 and ISO 13567-2 (ISO/TR 13567-3:1999) |
| DIN EN ISO 3262-14-2000 |
涂料用填充剂.规范和试验方法.第14部分:白硅石 |
Extenders for paints - Specifications and methods of test - Part 14: Cristobalite (ISO 3262-14:2000); German version EN ISO 3262-14:2000 |
| DIN EN 1969-2000 |
运动场地面.合成运动场地面厚度的测定 |
Surfaces for sports areas - Determination of thickness of synthetic sports surfaces; German version EN 1969:2000 |
| DIN ISO 5832-12-2000 |
外科植入物.金属材料.第12部分:锻造钴铬钼合金 |
Implants for surgery - Metallic materials - Part 12: Wrought cobalt-chromium-molybdenum alloy (ISO 5832-12:1996) |
| DIN 18195-3-2000 |
建筑物的防水层.第3部分:地面的要求和材料的工作特性 |
Water-proofing of buildings - Part 3: Requirements to the ground and working properties of materials |
| DIN 18195-2-2000 |
建筑物的防水层.第2部分:材料 |
Water-proofing of buildings - Part 2: Materials |
| DIN 18195-1-2000 |
建筑物的防水层.第1部分:原理、定义及防水层类型的属性 |
Water-proofing of buildings - Part 1: Principles, definitions, attribution of waterproofing types |
| DIN EN 301164-2000 |
传输和多路复用(TM).同步数字体系(SDH).SDH租用线路.连接特性 |
Transmission and Multiplexing (TM) - Synchronous Digital Hierarchy (SDH) - SDH leased lines; Connection characteristics (Endorsement of the English version EN 301164 V 1.1.1 (1999-05) as German standard) |
| DIN ETS 300821-2000 |
宽带综合业务数字网(B-ISDN).异步转移模式(ATM)适配层(AAL).通过5型适配层对高级数据链路控制(HDLC)核心服 |
Broadband Integrated Services Digital Network (B-ISDN) - ATM Adaptation Layer (AAL) - Support of the High Level Data Link Control (HDLC) core service by AAL type 5 [ITU-T Recommendation I.365.4 (1996)] (Endorsement of the English version ETS 300821:1998 a |
| DIN EN 300497-4-2000 |
数字增强无线远程通信(DECT).通用接口(CI).试验实例库(TCL).第4部分:试验序列结构(TSS)和试验目的(TP);数据 |
Digital Enhanced Cordless Telecommunications (DECT) - Common Interface (CI); Test Case Library (TCL) - Part 4: Test Suite Structure (TSS) and Test Purposes (TP); Data Link Control (DLC) layer (Endorsement of the English version EN 300497-4 V 0.3.0 (1999-1 |
| DIN EN 868-10-2000 |
要进行消毒的医疗器械系统和包装材料.第9部分:用于生产可热密封的袋、卷轴和盖子的聚烯烃涂胶非织物材料.要 |
Packaging materials and systems for medical devices which are to be sterilized - Part 10: Adhesive coated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids; requirements and test methods; German version |
| DIN EN 709-2000 |
农林机械.安装旋转滚筒刀耕耘机、机动中耕锄和带驱动轮机动中耕锄的非专业人员操作的拖拉机.安全 |
Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motors hoes, motor hoes with drive wheel(s) - Safety (includes Amendment A1:1999); German version EN 709:1997 + A1:1999 |
| DIN 50934-3-2000 |
金属的腐蚀.腐蚀防护用水处理仪器效果的评定方法.第3部分:结垢的水装置中清除腐蚀物的现场腐蚀试验 |
Corrosion of metals - Methods for evaluation of efficiency of water treatment apparatus for corrosion protection - Part 3: Field corrosion test for removal of corrosion products in incrusted water installations |
| DIN ETS 300174-2000 |
网络信号方式(NA).在34-45Mbit/s范围内的属性质量组成部分电视信号数字编码 |
Network Aspects (NA) - Digital coding of component television signals for contribution quality applications in the range 34-45 Mbit/s (Endorsement of the English version ETS 300174:1992 + A1:1997 as German standard) |
| DIN EN 300417-6-1-2000 |
传输和多路复用(TM).设备传输功能性的一般要求.第6-1部分:同步层功能 |
Transmission and Multiplexing (TM) - Generic requirements of transport functionality of equipment - Part 6-1: Synchronization layer functions (Endorsement of the English version EN 300417-6-1 V 1.1.3 (1999-05) as German Standard) |
| DIN EN 300417-2-2-2000 |
传输和多路复用(TM).设备传输功能性的一般要求.第2-2部分:同步数字体系(SDH)和准同步数字体系(PDH)物理层功 |
Transmission and Multiplexing (TM) - Generic requirements for transport functionality of equipment - Part 2-2: Synchronous Digital Hierarchy (SDH) and Plesiochronous Digital Hierarchy (PDH) physical section layer functions; Implementation Conformance Stat |
| DIN CWA 13849-3-2000 |
智能XFS接口规范.第3部分:智能XFS自动提款机目标接口规范 |
ActiveXFS interface specification - Part 3: ActiveXFS cash dispenser object interface specification; English version CWA 13849-3:2000 |
| DIN 38406-32-2000 |
德国对水、废水和淤泥的标准检验方法.阴离子(E组).第32部分:原子吸收分光光谱法测定锑(E32) |
German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 32: Determination of iron by atomic absorption spectrometry (E 32) |
| DIN EN 300481-2000 |
终端设备(TE).综合业务数字网(ISDN).B-通路集合单元(CAU).程序和终端要求 |
Terminal Equipment (TE) - Integrated Services Digital Network (ISDN) - B-Channel Aggregation Unit (CAU); procedures and terminal requirements (Endorsement of the English version EN 300481 V 1.2.2 (1997-12) as German standard) |
| DIN EN 301061-3-2000 |
综合业务数字网(ISDN).数字用户用1号信令系统(DSS1)协议.虚拟专用网(VPN)用支持在"b"业务入口点的补充业务 |
Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No. one (DSS1) protocol - Generic functional protocol for the support of supplementary services at the "b" service entry point for Virtual Private Network (VPN) applications |
| DIN EN 301065-2-2000 |
综合业务数字网(ISDN).无应答呼叫完成(CCNR)补充业务.数字用户用1号信令系统(DSS1)协议.第2部分:协议实现一 |
Integrated Services Digital Network (ISDN) - Completion of Calls on No Reply (CCNR) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol - Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification ( |
| DIN EN 301061-2-2000 |
综合业务数字网(ISDN).数字用户用1号信令系统(DSS1)协议.虚拟专用网(VPN)用支持在"b"业务入口点的补充业务 |
Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No. one (DSS1) protocol - Generic functional protocol for the support of supplementary services at the "b" service entry point for Virtual Private Network (VPN) applications |
| DIN EN 50241-1-2000 |
可燃或毒性气体和蒸气的检测用开路仪器规范.第1部分:一般要求和试验方法 |
Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 1: General requirements and test methods; German version EN 50241-1:1999 |
| DIN EN 300745-3-1999 |
综合业务数字网(ISDN).消息等待指示(MWI)补充业务.数字用户用1号信令系统(DSS1)协议.第3部分:用户用试验组 |
Integrated Services Digital Network (ISDN) - Message Waiting Indication (MWI) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol - Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user (Endorse |
| DIN 18892-2000 |
装在瓷砖壁炉和砌瓦炉内用固体燃料加热的内衬 |
Inserts for solid fuel to be built in Kacheloefen/Putzoefen |
| DIN EN 300497-3-2000 |
数字增强无线远程通信(DECT).通用接口(CI).试验实例库(TCL).第3部分:媒介存取控制(MAC)层的抽象试验序列(AT |
Digital Enhanced Cordless Telecommunications (DECT) - Common Interface (CI); Test Case Library (TCL) - Part 3: Abstract Test Suite (ATS) for Medium Access Control (MAC) layer; Fixed radio Termination (FT) (Endorsement of the English version EN 300497-3 V? |
| DIN EN 12959-2000 |
鞋靴.鞋底中间狭窄部分的试验方法.纵向劲度 |
Footwear - Test methods for shanks - Longitudinal stiffness; German version EN 12959:2000 |
| DIN EN 60118-6-2000 |
助听器.第6部分:助听器输入线路特性 |
Hearing aids - Part 6: Characteristics of electrical input circuits for hearing aids (IEC 60118-6:1999); German version EN 60118-6:1999 |
| DIN EN 12350-1-2000 |
新浇混凝土试验.第1部分:取样 |
Testing fresh concrete - Part 1: Sampling; German version EN 12350-1:1999 |
| DIN EN 12591-2000 |
沥青和沥青粘合剂.铺路级沥青规范 |
Bitumen and bituminous binders - Specifications for paving grade bitumen; German version EN 12591:1999 |
| DIN EN 301065-1-2000 |
综合业务数字网(ISDN).无应答呼叫完成(CCNR)补充业务.数字用户用1号信令系统(DSS1)协议.第1部分:协议规范 |
Integrated Services Digital Network (ISDN) - Completion of Calls on No Reply (CCNR) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol - Part 1: Protocol specification (Endorsement of the English version EN 301065-1 V 1.2. |
| DIN EN 301104-2000 |
人为因素(HF).欧洲电话编号空号(ETNS)的人为因素要求 |
Human Factors (HF) - Human factors requirements for a European Telephony Numbering Space (ETNS) (Endorsement of the English version EN 301104 V 1.1.1 (1998-10) as German standard) |
| DIN EN 50133-7-2000 |
报警系统.用于安全设施的接近控制设备.第7部分:应用指南 |
Alarm systems - Access control systems for use in security applications - Part 7: Application guidelines; German version EN 50133-7:1999 |
| DIN V VDE V 0530-18-33-2000 |
旋转电机.第18部分:绝缘系统功能评定.第33节:模绕绕组试验程序.多因素功能评定.最大达到50MVA和15kV的机器 |
Rotating electrical machines - Part 18: Functional evaluation of insulation systems; Section 33: Test procedures for form-wound windings; multifactor functional evaluation; endurance under combinded thermal and electrical stresses of insulation systems us |
| DIN EN ISO 9606-5-2000 |
焊工的认可试验.熔焊.第5部分:钛和钛合金、锆和锆合金 |
Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000); German version EN ISO 9606-5:2000 |
| DIN V VDE V 0530-18-32-2000 |
旋转电机.第18部分:绝缘结构的功能性评定.第32节:成型绕组的试验程序.50MVA和15KV及以下的电机绝缘结构的电 |
Rotating electrical machines - Part 18: Functional evaluation of insulation systems; Section 32: Test procedures for form-wound windings; electrical evaluation of insulation systems used in machines up to and including 50 MVA and 15 kV (IEC 60034-18-32:19 |
| DIN 18007-2000 |
拆除.方案、程序、应用场所 |
Demolition works - Concepts, procedures, fields of application |
| DIN EN 996/A1-2000 |
打桩设备.安全性要求(包括技术勘误AC:1999)修改件A1:德文版本EN996:1995/A1:1999+AC:1999 |
Piling equipment - Safety requirements (including Corrigendum AC:1999); Amendment A1; German version EN 996:1995/A1:1999 + AC:1999 |
| DIN ETS 300009-3-2000 |
综合业务数字网络(ISDN).7号信令系统.支持国际互连的信令连接控制部分(SCCP)(无连接和2级定向连接).第3部分 |
Integrated Services Digital Network (ISDN) - Signalling System No. 7 - Signalling Connection Control Part (SCCP) (connectionless and connection-oriented class 2) to support international interconnection - Part 3: Abstract Test Suite (ATS) and partial Prot |
| DIN EN 301174-1-2000 |
宽带综合业务数字网(B-ISDN).数字用户用2号信令系统(DSS2)协议.帧中继业务的信令规范.第1部分:E-ITU 推荐的 |
Broadband Integrated Services Digital Network (B-ISDN) - Digital Subscriber Signalling System No. two (DSS2) protocol; signalling specification for frame relay service - Part 1: Protocol specification [ITU-T-Recommendation Q.2933 (1996), modified] (Endors |
| DIN EN 300019-2-8-2000 |
设备工程(EE).电信设备的环境条件和环境试验.第2-8部分:地下用固定设备的环境试验规范 |
Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-8: Specification of environmental tests; stationary use at underground locations (Endorsement of the English version EN 300019-2-8 V 2. |
| DIN EN ISO 4611-2000 |
塑料.湿热、水溅和盐雾效应的测定 |
Plastics - Determination of effects of exposure to damp heat, water spray and salt mist (ISO 4611:1987); German version EN ISO 4611:1999 |
| DIN EN 300019-2-2-2000 |
设备工程(EE).电信设备环境条件和环境试验.第2-2部分:运输环境试验规范 |
Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-2: Specification of environmental tests, transportation (Endorsement of the English version EN 300019-2-2 V 2.1.2 (1999-09) as German s |
| DIN 28602-2000 |
球墨铸铁管及管件.栓接压盖密封接头.组件、套管、中间环、密封圈、螺栓和螺母 |
Ductile iron pipes and fittings - Bolted gland joints - Assembly, sockets, counter ring, sealing ring, bolts and nuts |
| DIN EN ISO 81714-1-2000 |
用于产品技术文件用图形符号的设计.第1部分:基本规则 |
Design of graphical symbols for use in the technical documentation of products - Part 1: Basic rules (ISO 81714-1:1999); German version EN ISO 81714-1:1999 |
| DIN EN 13215-2000 |
制冷用冷凝装置.额定条件、公差和制造商性能数据的表示 |
Condensing units for refrigeration - Rating conditions, tolerances and presentation of manufacturer's performance data; German version EN 13215:2000 |
| DIN 15565-2-2000 |
电影和电视制作室用配电装置.第2部分:电流瓦时计ZK |
Electric power-distribution equipment for production workstations for film and television - Part 2: Current watthour meter ZK |
| DIN EN 527-1-2000 |
办公家具.工作台和写字台.第1部分:尺寸 |
Office furniture - Work tables and desks - Part 1: Dimensions; German version EN 527-1:2000 |
| DIN EN 300497-7-2000 |
数字增强无线远程通信(DECT).通用接口(CI).试验实例库(TCL).第7部分:网络(NWK)层用抽象试验序列(ATS);便携 |
Digital Enhanced Cordless Telecommunications (DECT) - Common Interface (CI); Test Case Library (TCL) - Part 7: Abstract Test Suite (ATS) for Network (NWK) layer; Portable radio Termination (PT) (Endorsement of the English version ETS 300497-7 V 0.3.0 (199 |
| DIN EN 301361-2-2000 |
数字增强无线远程通信(DECT).综合业务数字网(ISDN).ISDN移动协议交换规范协议子集(IMIP):第2部分:移动通信 |
Digital Enhanced Cordless Telecommunications (DECT) - Integrated Services Digital Network (ISDN); ISDN Mobility protocol Interworking specification Profile (IMIP) - Part 2: DECT/ISDN interworking for Global System for Mobile communications (GSM) support ( |
| DIN 38413-8-2000 |
德国对水、废水和淤泥的标准检验方法.单一组份(P组).第3部分:用气相色谱法测定次氯基三乙酸(NTA)、乙二胺四 |
German standard methods for the examination of water, waste water and sludge - Single components (group P) - Part 8: Determination of nitrilotriacetic acid (NTA), ethylenedinitrilotetraacetic acid (EDTA) and diethylenetrinitrilopentaacetic acid (DTPA) by? |
| DIN EN 301126-1-2000 |
固定无线电系统.一致性检验.第1部分:点对点设备.定义,一般要求和试验程序 |
Fixed Radio Systems - Conformance testing - Part 1: Point-to-point equipment; definitions, general requirements and test procedures (Endorsement of the English version EN 301126-1 V 1.1.2 (1999-09) as German standard) |
| DIN EN ISO 9241-16-2000 |
办公用视觉显示终端的人类工效学要求.第16部分:直接处理对话 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 16: Direct-manipulation dialogues (ISO 9241-16:1999); German version EN ISO 9241-16:1999 |
| DIN EN 50160-2000 |
公共配电系统供电的电压特性 |
Voltage characteristics of electricity supplied by public distribution systems; German version EN 50160:1999 |
| DIN EN 302094-1-2000 |
综合业务数字网(ISDN).数字用户用1号信令系统(DSS1)和7号信令系统(SS7)协议.无绳终端动态(CTM)阶段1的不可 |
Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No. one (DSS1) and Signalling System No. 7 (SS7) protocols; Call Forwarding on Not Reachable (CFNRc) supplementary service for Cordless Terminal Mobility (CTM) phase 1 - Par |
| DIN EN 60264-3-2-2000 |
绕组线的包装.第3-2部分:圆锥形筒装交货线盘.热塑材料可回收线盘规范 |
Packaging of windings wires - Part 3-2: Taper barrelled delivery spools; specification for returnable spools made from thermoplastic materials (IEC 60264-3-2:1999); German version EN 60264-3-2:1999 |
| DIN EN 60534-2-1-2000 |
工业过程控制阀.第2-1部分:流通能力.安装条件下流体流量的校准公式 |
Industrial-process control valves - Part 2-1: Flow capacity; sizing equations for fluid flow under installed conditions (IEC 60534-2-1:1998); German version EN 60534-2-1:1998 |
| DIN EN 50321-2000 |
低压设备上工作用电绝缘鞋靴 |
Electrically insulating footwear for working on low voltage installations; German version EN 50321:1999 |
| DIN ETS 300661-2-2000 |
宽带综合业务数字网(B-ISDN).数字用户信令系统No.2(DSS2)协议.直接拨入(DDI)补充业务.第2部分:协议实现一致 |
Broadband Integrated Services Digital Network (B-ISDN) - Digital Subscriber Signalling System No. two (DSS2) protocol; Direct Dialling In (DDI) supplementary service - Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification (En |
| DIN ETS 300661-1-2000 |
宽带综合业务数字网(B-ISDN).数字用户2号信令系统(DSS2)协议.直接拨入(DDI)补充业务.第1部分:协议规范 |
Broadband Integrated Services Digital Network (B-ISDN) - Digital Subscriber Signalling System No. two (DSS2) protocol; Direct Dialling In (DDI) supplementary service - Part 1: Protocol specification [ITU-T-Recommendation Q.2951, clause 1 (1995), modified] |
| DIN EN ISO 1060-2-2000 |
塑料.氯乙烯的均聚物和共聚物树脂.第2部分:试验样品的制备和性能的测定 |
Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2: Preparation of test samples and determination of properties (ISO 1060-2:1998); German version EN ISO 1060-2:1999 |
| DIN ETS 300394-4-1-2000 |
地面集群无线电系统(TETRA).一致性检验规范.第4部分:直接运行方式(DMO)用协议检验规范.第1分部分:移动站对 |
Terrestrial Trunked Radio (TETRA) - Conformance testing specification - Part 4: Protocol testing specification for Direct Mode Operation (DMO); Sub-part 4-1: Test Suite Structure and test Purposes (TSS&TP) for Mobile Station to Mobile Station (MS-MS) Air? |
| DIN EN 12470-1-2000 |
体温计.第1部分:大刻度的玻璃内有金属液体的温度计 |
Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device; German version EN 12470-1:2000 |
| DIN EN 12470-3-2000 |
体温计.第3部分:大刻度的小型电测温度计的性能(可预测和不可预测的) |
Clinical thermometers - Part 3: Performance of compact electrical thermometers (predictive and non-predictive) with maximum device; German version EN 12470-3:2000 |
| DIN ISO/IEC 14473-2000 |
信息技术.办公室设备.规定图像扫描器的最少信息 |
Information technology - Office equipment - Minimum information to be specified for image scanners (ISO/IEC 14473:1998) |
| DIN ETS 300638-2000 |
传输和多路传输(TM).数字无线电中继系统(DRRS).具有20MHz备用信道间隔的在频道10GHz和14GHz上运转的数字信 |
Transmission and Multiplexing (TM) - Digital Radio Relay Systems (DRRS) - Fixed point-to-point radio link equipment for the transmission of digital signals and analogue video signals operating in the frequency bands 10 GHz and 14 GHz with 20 MHz alternate |
| DIN EN 12668-3-2000 |
无损检测.超声检测设备的特性和验证.第3部分:组合设备 |
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment; German version EN 12668-3:2000 |
| DIN EN 300497-1-2000 |
数字增强无线远程通信(DECT).通用接口(CI).试验实例库(TCL).第1部分:试验序列结构(TTS)和媒介存取控制(MAC) |
Digital Enhanced Cordless Telecommunications (DECT) - Common Interface (CI); Test Case Library (TCL) - Part 1: Test Suite Structure (TSS) and Test Purposes (TP) for Medium Access Control (MAC) layer (Endorsement of the English version EN 300497-1 V 0.3.2? |
| DIN EN 300462-4-2-2000 |
传输和多路复用(TM).同步网络的一般要求.第4-2部分:适用于同步数字层次(SDH)和准同步数字(PDH)层次设备的从 |
Transmission and Multiplexing (TM) - Generic requirements for synchronization networks - Part 4-2: Timing characteristics of slave clocks suitable for synchronization supply to Synchronous Digital Hierarchy (SDH) and Plesiochronous Digital Hierarchy (PDH) |
| DIN EN 300477-2000 |
通用个人电信(UPT).UPT阶段2.UPT集成线路卡(ICC)和卡的接收装置(CAA).接口的功能规范.适用于双音多频装置的 |
Universal Personal Telecommunication (UPT) - UPT Phase 2 - Functional specification of the interface of a UPT Integrated Circuit Card (ICC) and Card Accepting Devices (CAD); UPT card accepting Dual Tone Multiple Frequency (DTMF) device (Endorsement of the |
| DIN EN ISO 15087-5-2000 |
牙科起子.第5部分:贝恩(Bein)起子 (ISO 15087-5:2000); 德文版本 EN ISO 15087-5:2000 |
Dental elevators - Part 5: Bein elevators (ISO 15087-5:2000); German version EN ISO 15087-5:2000 |
| DIN EN 60730-2-18-2000 |
家用和类似用途的电气自动控制器.第2-18部分:电气自动水流和气流敏感控制器的特殊要求（包括机械要求） |
Automatic electrical controls for household and similar use - Part 2-18: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements (IEC 60730-2-18:1997, modified); German version EN 60730-2-18: |
| DIN 26050-4-2000 |
油罐系统接口.加油站接口.第4部分:油量表 |
Interfaces of tank systems - Petrol station interface - Part 4: Tank gauge |
| DIN EN 61169-32-2000 |
射频连接器.第32部分:外导体内径为1,85mm(0,072in)的螺纹连接射频同轴连接器.特性阻抗50欧姆(1,85型) |
Radio-frequency connectors - Part 32: RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with srew coupling; characteristic impedance 50 ohms (type 1,85) (IEC 61169-32:1999); German version EN 61169-32:1999 |
| DIN 38414-22-2000 |
德国对水、废水和淤泥的标准检验方法.淤泥和沉积物(S组).第22部分:冻结法测定干渣及淤泥冻干物的制备(S22) |
German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 22: Determination of dry residue by freezing and preparation of the freeze dried mass of sludge (S 22) |
| DIN EN 61195-2000 |
双端荧光灯.安全规范 |
Double-capped fluorescent lamps - Safety specifications (IEC 61195:1999); German version EN 61195:1999 |
| DIN EN 62037-2000 |
射频(RF)连接器.连接器电缆组件和电缆.互调电平测量 |
RF connectors, connector cable assemblies and cables - Intermodulation level measurement (IEC 62037:1999); German version EN 62037:1999 |
| DIN 26051-1-2000 |
槽车和运输车辆的数据接口.第1部分:商业和后勤数据 |
Data Interface for tank trucks and transport vehicles - Part 1: Commercial and logistic Data |
| DIN EN 301439-2000 |
数字增强无线远程通信(DECT).移动通信全球系统(GSM).DECT/GSM双模式终端设备用附件要求(英文版本核准本 EN? |
Digital Enhanced Cordless Telecommunications (DECT) - Global System for Mobile communications(GSM) - Attachment requirements for DECT/GSM dual-mode terminal equipment (Endorsement of the English version EN 301439 V 1.1.1 (1999-03) as German standard) |
| DIN 6814-2-2000 |
放射技术领域中的术语.第2部分:辐射物理学 |
Terms in the field of radiological technique - Part 2: Radiation physics |
| DIN EN 50189-2000 |
架空导线.镀锌钢丝 |
Conductors for overhead lines - Zinc coated steel wires; German version EN 50189:2000 |
| DIN EN 61316-2000 |
工业电缆卷筒 |
Industrial cable reels (IEC 61316:1999); German version EN 61316:1999 |
| DIN EN 60264-3-4-2000 |
绕组线包装.第3-4部分:锥形筒式线盘.锥形线盘容器基本尺寸 |
Packaging of winding wires - Part 3-4: Taper barrelled delivery spools; basic dimensions of containers for taper barrelled delivery spools (IEC 60264-3-4:1999); German version EN 60264-3-4:1999 |
| DIN ISO 230-2-2000 |
机床.机床试验规程.第2部分:数控轴定位精度和可重复性测定 |
Machine tools - Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes (ISO 230-2:1997) |
| DIN EN 300141-6-2000 |
综合业务数字网(ISDN).呼叫保持(HOLD)补充业务.数字用户用1号信令系统(DSS1)协议.第6部分:网络用抽象试验组 |
Integrated Services Digital Network (ISDN) - Call Hold (HOLD) supplementary service - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT |
| DIN EN ISO 7393-3-2000 |
水质.游离氯和氯总含量测定.第3部分:测定氯总含量的碘量滴定法 |
Water quality - Determination of free chlorine and total chlorine - Part 3: Iodometric titration method for the determination of total chlorine (ISO 7393-3:1990); German version EN ISO 7393-3:2000 |
| DIN EN ISO 13694-2000 |
光学和光学设备.激光和激光相关设备.激光束能量密度分布的试验方法 |
Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000); German version EN ISO 13694:2000 |
| DIN EN ISO 6808-2000 |
给排油用塑料软管及软管组件.规范 |
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:1999); German version EN ISO 6808:2000 |
| DIN EN 12766-1-2000 |
石油产品和用过的油.多氯联苯和相关产品的测定.第1部分:使用电子俘获检测器(ECD)的气相色谱法(GC)分离和测 |
Petroleum products and used oils - Determination of PCBs and related products - Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD); German version EN 12766-1:2000 |
| DIN 25482-10-2000 |
电离辐射测得值的检测极限和置信区间.第10部分:一般应用 |
Detection limit and decision threshold for ionizing radiation measurements - Part 10: General applications |
| DIN EN 1559-2-2000 |
铸造.交货技术条件.第2部分:钢铸件附加要求 |
Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings; German version EN 1559-2:2000 |
| DIN EN 12606-2-2000 |
沥青和沥青粘合剂.石蜡含量的测定.第2部分:萃取法 |
Bitumen and bituminous binders - Determination of the paraffin wax content - Part 2: Method by extraction; German version EN 12606-2:1999 |
| DIN EN ISO 703-1-2000 |
输送带.挠性驱动和成槽性.第1部分:试验方法 |
Conveyor belts - Transverse flexibility and troughability - Part 1: Test method (ISO 703-1:1999); German version EN ISO 703-1:1999 |
| DIN EN 1946-4-2000 |
建筑产品和建筑部件的热性能.实验室评估热传导性能专用准则.第4部分:高温箱测量法 |
Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 4: Measurements by hot box methods; German version EN 1946-4:2000 |
| DIN 6075-2-2000 |
包装方法.瓶.第2部分:维希(Vichy)型2 |
Means of packaging - Bottles - Part 2: Vichy-shape 2 |
| DIN EN 13178-2000 |
人员的眼睛保护.雪地汽车使用者用护目器 |
Personal eye protection - Eye protectors for snow mobile users; German version EN 13178:2000 |
| DIN 25409-7-2000 |
屏蔽墙后使用的遥控装卸设备.第7部分:电动动力控制.要求和检验 |
Remote handling devices for use behind shielding walls - Part 7: Power manipulators with electric drives; requirements and testing |
| DIN 53380-1-2000 |
塑料制品试验.气体传输率的测定.第1部分:塑料薄模试验用容积测量法 |
Testing of plastics - Determination of gas transmissionsrate - Part 1: Volumetrical method for testing of plastic films |
| DIN EN ISO 9946-2000 |
操作型工业机器人.特性表示 |
Manipulating industrial robots - Presentation of characteristics (ISO 9946:1999); German version EN ISO 9946:1999 |
| DIN EN ISO 5778-2000 |
造船技术.防风雨的小型钢舱盖 |
Ships and marine technology - Small weathertight steel hatches (ISO 5778:1998); German version EN ISO 5778:2000 |
| DIN 22121-2000 |
煤矿用织物叠层输送带.单层或双层带的永久性连接接头.尺寸、要求和标记 |
Conveyor belts with textile plies for coalmining - Permanent joints for belts with one or two plies; dimensions, requirements, marking |
| DIN VDE 0701-1-2000 |
电器的修理、改进和检验.第1部分:一般要求 |
Repair, modification and inspection of electrical appliances - Part 1: General requirements |
| DIN EN ISO 4869-4-2000 |
声学.听力保护器.第4部分:与压平有关的声音恢复耳罩的有效声压级的测量 |
Acoustics - Hearing protectors - Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs (ISO/TR 4869-4:1998); German version EN ISO 4869-4:2000 |
| DIN EN 1075-2000 |
木质构件.试验方法.金属板冲压紧固件连接接头 |
Timber structures - Test methods - Joints made with punched metal plate fasteners; German version EN 1075:1999 |
| DIN EN 12540-2000 |
金属的腐蚀防护.镍、镍加铬、铜加镍和铜加镍加铬的电解镀层 |
Corrosion protection of metals - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium; German version EN 12540:2000 |
| DIN EN 301242-2000 |
数字增强无线远程通信(DECT).移动通信全球系统(GSM).基于双模式终端的DECT/GSM的集成(英文版本核准本 EN 30 |
Digital Enhanced Cordless Telecommunication (DECT) - Global System for Mobile communications (GSM) - DECT/GSM integration based on dual-mode terminals (Endorsement of the English version EN 301242 V 1.2.2 (1999-09) as German standard) |
| DIN EN 301361-1-2000 |
数字增强无线远程通信(DECT).综合业务数字网(ISDN).ISDN移动协议交换规范协议子集(IMIP):第1部分:无线终端 |
Digital Enhanced Cordless Telecommunications (DECT) - Integrated Services Digital Network (ISDN); ISDN Mobility protocol Interworking specification Profile (IMIP) - Part 1: DECT/ISDN interworking for Cordless Terminal Mobility (CTM) support (Endorsement o |
| DIN EN 60704-2-11-2000 |
家用和类似电气装置.测定空气噪声的试验规范.第2-11部分:电动食品加工机的特殊要求 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-11: Particular requirements for electrically operated food preparation appliances (IEC 60704-2-11:1998); German version EN 60704-2-11:1999 |
| DIN EN 1538-2000 |
特殊土工工程施工.隔墙 |
Execution of special geotechnical works - Diaphragm walls; German version EN 1538:2000 |
| DIN EN 301371-2-2000 |
数字增强无线远程通信(DECT).无线终端移动性(CTM).CTM存取协议子集(CAP).协议子集试验规范(PTS).第2部分:协 |
Digital Enhanced Cordless Telecommunications (DECT) - Cordless Terminal Mobility (CTM); CTM Access Profile (CAP); Profile Test Specification (PTS) - Part 2: Profile Specific Test Specification (PSTS); Portable radio Termination (PT) (Endorsement of the En |
| DIN EN ISO 15620-2000 |
焊接.金属材料的摩擦焊接 |
Welding - Friction welding of metallic materials (ISO 15620:2000); German version EN ISO 15620:2000 |
| DIN V ENV 13607-2000 |
健康信息学.医用处方的信息交换文电消息 |
Health informatics - Messages for the exchange of information on medicine prescriptions; English version ENV 13607:2000 |
| DIN EN ISO 11199-1-2000 |
双臂操作的助步器.要求和试验方法.第1部分:步行支架:德文版本 EN ISO 11199-1:1999 |
Walking aids manipulated by both arms - Requirements and test methods - Part 1: Walking frames (ISO 11199-1:1999); German version EN ISO 11199-1:1999 |
| DIN EN 60249-2-3-2000 |
印制电路基材.第2部分:规范.第3号规范:规定易燃性的环氧化合物纤维素纸覆铜层压板(垂直燃烧试验) |
Base materials for printed circuits - Part 2: Specifications; Specification No. 3: Epoxide cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test) (IEC 60249-2-3:1987 + A1:1989 + A2:1993 + Corrig.:1994 + A3:1994 + A4:20 |
| DIN EN ISO 5267-1-2000 |
纸浆.滤水性能的测定.第1部分:肖伯尔-瑞格勒法(SCHO-PPER-RIEGLER) |
Pulps - Determination of drainability - Part 1: Schopper-Riegler method (ISO 5267-1:1999); German version EN ISO 5267-1:2000 |
| DIN EN 12524-2000 |
建筑材料和产品.湿热性能.表列设计值 |
Building materials and products - Hygrothermal properties - Tabulated design values; German version EN 12524:2000 |
| DIN EN ISO 6873-2000 |
牙科用石膏制品 |
Dental gypsum products (ISO 6873:1998); German version EN ISO 6873:2000 |
| DIN EN 60704-1-2000 |
家用及类似用途电器.空气噪声测定的试验规程.第1部分:一般要求 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 1: General requirements (IEC 60704-1:1997); German version EN 60704-1:1997 |
| DIN 58356-2-2000 |
膜过滤器元件.第2部分:压力保持器的试验 |
Membrane filter elements - Part 2: Pressure holder tests |
| DIN 18333-2000 |
建筑工程承包条例.第C部分:建筑工程通用技术规范.铸石工程 |
Contract procedures for building works - Part C: General technical specifications for building works; Cast stone works |
| DIN EN 12599-2000 |
建筑物通风.已安装的通风和空调系统交付使用试验程序和测量方法 |
Ventilation for buildings - Test procedures and measuring methods for handing over installed ventilation and air conditioning systems; German version EN 12599:2000 |
| DIN ETS 300392-11-7-2000 |
地面主干线广播(TETRA).语音加数据(V+D).第11部分:补充服务2级.第7子部分:短号寻址(SNA) (英文版本核准本 E |
Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 11: Supplementary services stage 2; Sub-Part 7: Short Number Addressing (SNA) (Endorsement of the English version ETS 300392-11-7:2000 as German standard) |
| DIN ETS 300573-2000 |
数字移动电话远程通信系统(阶段2).无线电波路径的物理层.一般描述 (英文版本核准本 ETS 300573:1996 作为德 |
Digital cellular telecommunications system (Phase 2) - Physical layer on the radio path - General description (Endorsement of the English version ETS 300573:1996 as German standard) |
| DIN ISO 13715-2000 |
技术制图.未定义形状的边缘.词汇和说明 |
Technical drawings - Edges of undefined shape - Vocabulary and indication on drawings (ISO 13715:2000) |
| DIN EN 1349-2000 |
工业过程控制阀门 |
Industrial process control valves; German version EN 1349:2000 |
| DIN EN 60660-2000 |
绝缘子.标称电压在1KV至300KV(不含)的系统用有机材料户内支柱绝缘子的试验 |
Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV (IEC 60660:1999); German version EN 60660:1999 |
| DIN EN ISO 10360-3-2000 |
产品几何量规范(GPS).坐标测量机(CMM)的验收和复检试验.第3部分:旋转台的轴线作为第四轴线的坐标测量机 |
Geometrical Product Specifications (GPS) - Acceptance test and reverification test for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis (ISO 10360-3:2000); German version EN ISO 10360-3:2000 |
| DIN EN ISO 10456-2000 |
建筑材料和制品.申报和设计热值的测定程序 |
Building materials and products - Procedures for determining declared and design thermal values (ISO 10456:1999); German version EN ISO 10456:1999 |
| DIN 25457-6-2000 |
放射性废料和核技术设备部件的释放放射性强度测量方法.第6部分:建筑物橡胶和建筑物 |
Activity measurement methods for the release of radioactive waste materials and nuclear facility components - Part 6: Building rubble and buildings |
| DIN EN 50239-2000 |
铁路设施.货运用牵引车辆的无线电遥控系统 |
Railway applications - Radio remote control system of traction vehicle for freight traffic; German version EN 50239:1999 |
| DIN ISO 8693-2000 |
模具.扁推杆 |
Tools for moulding - Flat ejector pins (ISO 8693:1998) |
| DIN EN 415-3-2000 |
包装机械的安全性.第3部分:成型,装填和密封机 |
Safety of packaging machines - Part 3: Form, fill and seal machines; German version EN 415-3:1999 |
| DIN EN 301217-1-2000 |
数字服务节点(SN)的V接口.宽带或宽带和窄带组合的接入网络(ANS)支持用VB5.2参考点接口.第1部分:接口规范 |
V interface at the digital Service Node (SN) - Interface at the VB5.2 reference point for the support of broadband or combined narrowband and broadband Access Networks (ANs) - Part 1: Interface specification (Endorsement of the English version EN 301217-1 |
| DIN ISO 10315-2000 |
卷烟.烟雾凝聚物中尼古丁含量测定.气相色谱法 |
Cigarettes - Determination of nicotine in smoke condensates - Gas-chromatographic method (ISO 10315:2000) |
| DIN ISO 3308-2000 |
卷烟烟雾常规分析仪.定义和标准条件 |
Routine analytical cigarette-smoking machine - Definitions and standard conditions (ISO 3308:2000) |
| DIN EN 61966-3-2000 |
多媒体系统和设备.色彩测定和管理.第3部分:使用阴极射线管的设备 |
Multimedia systems and equipment - Colour measurement and management - Part 3: Equipment using cathode ray tubes (IEC 61966-3:2000); German version EN 61966-3:2000 |
| DIN EN ISO 8689-2-2000 |
水质.江河的生物分类.第2部分:对底栖微型无脊椎动物调查的生物质量数据的表示方法指南 |
Water quality - Biological classification of rivers - Part 2: Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-2:2000); German version EN ISO 8689-2:2000 |
| DIN 4703-3-2000 |
取暖设备.第3部分:标准热输出量的换算 |
Heating appliances - Part 3: Conversion of the standard thermal output |
| DIN 19684-10-2000 |
农业水利工程中土壤研究方法.化学实验室试验.第10部分:灌溉用水的试验和评定 |
Methods of soil investigations for agricultural engineering - Chemical laboratory tests - Part 10: Testing and evaluation of water for irrigation |
| DIN EN 61558-2-13-2000 |
电力变压器、电源装置及类似设备的安全.第2-13部分:通用自耦变压器的特殊要求 |
Safety of power transformers, power supply units and similar devices - Part 2-13: Particular requirements for auto-transformers for general use (IEC 61558-2-13:1999); German version EN 61558-2-13:2000 |
| DIN EN 454-2000 |
食品加工机械.行星式搅拌机.安全和卫生要求 |
Food processing machinery - Planetary mixers - Safety and hygiene requirements; German version EN 454:2000 |
| DIN EN 415-1-2000 |
包装机械的安全性.第1部分:包装机械和相关设备的术语和分类 |
Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment; German version EN 415-1:2000 |
| DIN 33866-4-2000 |
信息技术.办公室设备.彩色图像重现装置.第4部分:通过彩色图像重现装置模拟输入和数字输出规定彩色装置的图 |
Information technology - Office machines; devices for colour image reproduction - Part 4: Method of specifying image reproduction of colour devices by analog input and digital output for colour image reproduction devices: "analog-digital" (scanners), real |
| DIN EN 614-2-2000 |
机器的安全性.人类工效学设计原理.第2部分:机器设计和工作任务之间的相互作用 |
Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks; German version EN 614-2:2000 |
| DIN EN 301145-3-2000 |
宽带综合业务数字网(B-ISDN).数字用户用1号信令系统(DSS1)协议.电信业务.第3部分:终端用户(EUT）用试验组结 |
Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No. one (DSS1) protocol; teleaction service - Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the End User Terminal (EUT) (Endorsement of the Engli |
| DIN EN 301145-7-2000 |
宽带综合业务数字网(B-ISDN).数字用户用1号信令系统(DSS1)协议.电信业务.第7部分:遥信管理功能(TMF)试验组 |
Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No. one (DSS1) protocol; teleaction service - Part 7: Test Suite Structure and Test Purposes (TSS&TP) specification for the Teleaction Management Function (TMF) (Endorsement |
| DIN EN 301217-2-2000 |
数字服务节点(SN)的V接口.宽带或宽带和窄带组合接入网络(ANS)支持用VB5.2参考点接口.第2部分:协议实现一致 |
V interfaces at the digital Service Node (SN) - Interfaces at the VB5.2 reference point for the support of broadband or combined narrowband and broadband Access Networks (ANs) - Part 2: Protocol Implementation Conformance Statement (PICS) proforma specifi |
| DIN EN 301437-2000 |
终端设备(TE).泛欧认可的连接到可用双音多频（DTMF)信令（如果提供），进行网络寻址的、支持语音电话服务 |
Terminal Equipment (TE) - Attachment requirements for pan-European approval for connection to the analogue Public Switched Telephone Networks (PSTNs) of TE supporting the voice telephony service in wich network addressing, if provided, is by means of Dual |
| DIN EN 300189-2000 |
专业综合服务网(PISN).寻址(ISO/IEC 11571-1998修改件) |
Private Integrated Services Network (PISN) - Addressing (ISO/IEC 11571:1998, modified) (Endorsement of the English version EN 300189 V 1.2.1(1999-11) as German standard) |
| DIN EN 302084-2000 |
传输和多路复用(TM).传输网络中的跳动和飘移 |
Transmission and Multiplexing (TM) - The control of jitter and wander in transport networks (Endorsement of the English version EN 302084 V 1.1.1 (2000-02) as German standard) |
| DIN EN 301145-5-2000 |
宽带综合业务数字网(B-ISDN).数字用户用1号信令系统(DSS1)协议.电信业务.第5部分:服务提供者终端(SPT)试验 |
Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No. one (DSS1) protocol; teleaction service - Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the Service Provider Terminal (SPT) (Endorsement of t |
| DIN EN ISO 9665-2000 |
粘合剂.动物胶.取样和试验方法 |
Adhesives - Animal glues - Methods for sampling and testing (ISO 9665:1998); German version EN ISO 9665:2000 |
| DIN EN 12225-2000 |
土工织物及相关产品.土埋抗微生物试验方法 |
Geotextiles and geotextile-related products - Method for determining the microbiological resistance by a soil burial test; German version EN 12225:2000 |
| DIN EN ISO 10519-2000 |
油菜籽.叶绿素含量测定.光谱法 |
Rapeseed - Determination of chlorophyll content - Spectrometric method (ISO 10519:1997); German version EN ISO 10519:2000 |
| DIN EN 12373-14-2000 |
铝及铝合金.阳极化处理.第14部分:阳极氧化覆层图像清晰度的目视测定.图表比例尺法 |
Aluminium and aluminium alloys - Anodizing - Part 14: Visual determination of image clarity of anodic oxidation coatings; Chart scale method; German version EN 12373-14:2000 |
| DIN 33866-5-2000 |
信息技术.办公室设备.彩色图像重现装置.第5部分:通过彩色图像重现装置数字输入和模拟输出作为软拷贝规定彩 |
Information technology - Office machines; devices for colour image reproduction - Part 5: Method of specifying image reproduction of colour devices by digital input and analog output as softcopy with colour image reproduction devices: "digital-analog" (mo |
| DIN EN 60317-4-2000 |
特种绕组线规范.第4部分:130级可焊接聚氨酯漆包圆铜线 |
Specifications for particular types of winding wires - Part 4: Solderable polyurethane enamelled round copper wire, class 130 (IEC 60317-4:1990 + A1:1997 + A2:1999); German version EN 60317-4:1994 + A1:1998 + A2:2000 |
| DIN EN 60317-11-2000 |
特种绕组线规范.第11部分:130级丝包聚氨酯漆包圆铜束线 |
Specifications for particular types of winding wires - Part 11: Bunched solderable polyurethane enamelled round copper wires, class 130, with silk covering (IEC 60317-11:1999); German version EN 60317-11:2000 |
| DIN V ENV 13608-1-2000 |
健康信息学.保健通信的安全.第1部分:概念和术语 |
Health informatics - Security for healthcare communication - Part 1: Concepts and terminology; English version ENV 13608-1:2000 |
| DIN EN ISO 8689-1-2000 |
水质.江河的生物分类.第1部分:对底栖微型无脊椎动物调查的生物质量数据的解释指南 |
Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-1:2000); German version EN ISO 8689-1:2000 |
| DIN EN 301060-6-2000 |
综合业务数字网(ISDN).数字用户用1号信令系统(DSS1)协议.基本呼叫控制.虚拟专网(VPN)用"b"业务入口点的增强 |
Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No. one (DSS1) protocol; Basic call control; enhancement at the "b" service entry point for Virtual Private Network (VPN) applications - Part 6: Abstract Test Suite (ATS) an |
| DIN EN ISO 15087-6-2000 |
牙科起子.第6部分:弗洛(Flohr)起子 (ISO 15087-6:2000); 德文版本 EN ISO 15087-6:2000 |
Dental elevators - Part 6: Flohr elevators (ISO 15087-6:2000); German version EN ISO 15087-6:2000 |
| DIN EN 302092-1-2000 |
宽带综合业务数字网(B-ISDN)和宽带专用综合业务网(PSTNS).数字用户用2号信令系统.宽带内部交换信令(B-QSIG) |
Broadband Integrated Services Digital Network (B-ISDN) and Broadband Private Integrated Services Network (B-PISN) - Digital Subscriber Signalling System No. two (DSS2); Broadband Inter-Exchange Signalling (B-QSIG) and Signalling System No. 7 (SS7); call c |
| DIN EN 300347-1-2000 |
数字式本地交换的V接口.用于支持接入网络的V5.1接口.第1部分:V5.2接口规范 |
V interfaces at the digital Local Exchange (LE) - V5.1 interface for the support of Access Network (AN) - Part 1: V5.2 interface specifictation (Endorsement of the English version EN 300347-1 V 2.2.2 (1999-12) as German standard) |
| DIN ISO 8909-3-2000 |
农机和拖拉机.饲料收割机.第3部分:试验方法 |
Agricultural machinery and tractors - Forage harvesters - Part 3: Test methods (ISO 8903-3:1994) |
| DIN ISO 13926-2-2000 |
针头系列.第2部分:医用注射笔用活塞和垫片 |
Pen systems - Part 2: Plungers and discs for pen-injectors for medical use (ISO 13926-2:1999) |
| DIN VDE 0606-1-2000 |
低于690A伏的连接材料.第1部分:与设备和/或连接端子相适合的安装盒 |
Connecting materials up to 690 V - Part 1: Installation boxes for accomodation of equipment and/or connecting terminals |
| DIN EN ISO 6603-1-2000 |
塑料.硬质塑料耐冲孔性能的测定.第1部分:非仪器冲击试验 |
Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000); German version EN ISO 6603-1:2000 |
| DIN V ENV 13608-2-2000 |
健康信息学.保健通信的安全.第2部分:安全数据目标 |
Health informatics - Security for healthcare communication - Part 2: Secure data objects; English version ENV 13608-2:2000 |
| DIN V ENV 13608-3-2000 |
健康信息学.保健通信的安全.第3部分:安全数据通道 |
Health informatics - Security for healthcare communication - Part 3: Secure data channels; English version ENV 13608-3:2000 |
| DIN V ENV 13609-2-2000 |
健康信息学.保健系统中支持信息维护的消息.第2部分:医学试验室特殊信息的更新 |
Health informatics - Messages for maintenance of supporting information in healthcare systems - Part 2: Updating of medical laboratory-specific information; English version ENV 13609-2:2000 |
| DIN EN 45544-4-2000 |
工作场所空气.有毒气体和蒸气的直接浓度测量和直接检测用的电气装置.第4部分:选择、安装、使用和维修指南 |
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance; German version EN 45544-4:1999 |
| DIN ISO 5832-9-2000 |
外科植入物.金属材料.第9部分:锻造高氮不锈钢 |
Implants for surgery - Metallic materials - Part 9: Wrought high nitrogen stainless steel (ISO 5832-9:1992) |
| DIN EN ISO 14530-3-2000 |
塑料.非饱和聚酯粉末模塑化合物(UP-PMCs).第3部分:对所选模塑化合物的要求 |
Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14530-3:1999); German version EN ISO 14530-3:1999 |
| DIN EN 12763-2000 |
建筑物排水系统纤维水泥管道和配件.尺寸和交货技术条件 |
Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery; German version EN 12763:2000 |
| DIN EN 12814-5-2000 |
热塑性塑料半成品的焊接接头试验.第5部分:宏观检查 |
Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopic examination; German version EN 12814-5:2000 |
| DIN EN 12938-2000 |
锡基合金的分析方法.原子光谱仪法测定合金杂质含量 |
Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry (includes AC:2000); German version EN 12938:1999 + AC:2000 |
| DIN EN ISO 14530-2-2000 |
塑料.非饱和聚酯粉末模塑化合物(UP-PMCs).第2部分:试样制备和特性测定 |
Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999 |
| DIN EN 61189-3-2000 |
电气材料、互连结构和组件的试验方法.第3部分:互连结构的试验方法(印制电路板) |
Test methods for electrical materials, interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) (IEC 61189-3:1997 + A1:1999); German version EN 61189-3:1997 + A1:1999 |
| DIN EN 60068-2-9-2000 |
环境试验.第2部分:试验.太阳辐射试验指南 |
Environmental testing - Part 2: Tests; guidance for solar radiation testing (IEC 60068-2-9:1975 + A1:1984); German version EN 60068-2-9:1999 |
| DIN EN 1772-2000 |
表面活性剂.用浸没法测定润湿力 |
Surface active agents - Determination of wetting power by immersion (ISO 8022:1990, modified); German version EN 1772:2000 |
| DIN-Fachbericht 93-2000 |
国家应用文献(NAD).DIN V ENV 1993-1-2-1997的使用准则.欧洲法规3:钢构件的测量和建造.第1-2部分:通则.火灾 |
|
| DIN EN 302091-1-2000 |
宽带综合业务数字网(B-ISDN)和宽带专用综合业务网(PSTNS).数字用户用2号信令系统.宽带内部交换信令(B-QSIG) |
Broadband Integrated Services Digital Network (B-ISDN) and Broadband Private Integrated Services Network (B-PISN) - Digital Subscriber Signalling System No. two (DSS2); Broadband Inter-Exchange Signalling (B-QSIG) and Signalling System No. 7 (SS7); Preneg |
| DIN EN 302091-2-2000 |
宽带综合业务数字网(B-ISDN)和宽带专用综合业务网(PSTNS).数字用户用2号信令系统.宽带内部交换信令(B-QSIG) |
Broadband Integrated Services Digital Network (B-ISDN) and Broadband Private Integrated Services Network (B-PISN) - Digital Subscriber Signalling System No. two (DSS2); Broadband Inter-Exchange Signalling (B-QSIG) and Signalling System No. 7 (SS7); Preneg |
