| BS 572-1985 |
互换式锥形毛玻璃接头规范 |
Specification for interchangeable conical ground glass joints |
| BS 6407-2-1984 |
零售用柜式托盘.第2部分:300Kg承载力的可折叠柜式托盘安全运输与使用指南 |
Cage pallets for retail use - Guide to the safe handling and use of collapsible cage pallets rated at 300 kg |
| BS 5778-1979 |
工业用带前倾起重杆的码垛货车特殊条件下工作稳定性验证试验方法 |
Methods of test for verification of stability of industrial trucks operating in special condition of stacking with mast tilted forward |
| BS 3056-8-1987 |
耐火砖尺寸.第8部分:钢铁水包用砖规范 |
Sizes of refractory bricks - Specification for bricks for ladles |
| BS 4193-15-1986 |
镶硬质合金刀具.第15部分:无固定孔的可转位刮棱硬质合金刀片尺寸规范 |
Hardmetal insert tooling - Specification for dimensions for indexable hardmetal (carbide) inserts with wiper edges but without fixing hole |
| BS 3929-1965 |
使用商用丁烷的家用固体燃料火钳和便携式等外点火炉规范 |
Specification for domestic solid fuel ignition pokers and portable undergrate ignition burners for use with commercial butane |
| BS 6237-1982 |
白云母片的分级和目测分类方法 |
Method for grading and visual classification for muscovite mica splittings |
| BS 4981-1984 |
满朵邦鞋类尺寸和标号制规范 |
Specification for Mondopoint footwear sizing and marking system |
| BS 3424-18-1986 |
涂覆织物试验.第18部分:方法21A 及21B.抗芯吸和侧向泄漏测定方法 |
Testing coated fabrics - Methods 21A and 21B - Methods for determination of resistance to wicking and lateral leakage |
| BS 5306-0-1986 |
住宅灭火装置及设备.第0部分:固定灭火系统和其它灭火装置选用指南 |
Fire extinguishing installations and equipment on premises - Guide for the selection of installed systems and other fire equipment |
| BS 2742M-1960 |
小型煤烟浓度表 |
Miniature smoke chart |
| BS 2811-1969 |
烟雾密度指示器与记录器规范 |
Specification for smoke density indicators and recorders |
| BS 3221-1-1985 |
药用量具.满刻度50ml的药用量具规范 |
Medicine measures - Specification for medicine measures of 50 ml total graduated capacity |
| BS 4878-1973 |
矿和露天矿用(V型入口)大型牵引钢索滑轮规范 |
Specification for large (vee-throated) haulage rope pulleys for mines and quarries |
| BS 5537-1991 |
设计图纸和配置图格式指南 |
Guide to forms design sheet and layout chart |
| BS 3134-4-1992 |
米制锥形滚柱轴承.第4部分:命名制度规范 |
Metric tapered roller bearings - Specification for designation system |
| BS 7568-7-1992 |
冲压工具.带60°圆锥头和直杆的圆冲头 |
Press tools - Round punches with 60 ° conical head and straight shank |
| BS 2593-1974 |
旋转钻杆与碳化钨硬质合金旋转钻头规范 |
Specification for rotary drill rods and tungsten carbide tipped rotary drill bits |
| BS 5954-3-1985 |
482.6mm(19in)系列机械结构尺寸.第3部分:小框架与其插件规范 |
Dimensions of mechanical structures of the 482.6 mm (19 in) series - Specification for subracks and associated plug-in units |
| BS 3509-1962 |
管形酒精水平仪规范 |
Specification for spirit level vials |
| BS 3799-1974 |
石油工业用钢管配件、螺旋管接头和套管焊接规范 |
Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry |
| BS 1016-9-1977 |
煤和焦炭的分析与试验方法.第9部分:煤与焦炭中的磷 |
Methods for analysis and testing of coal and coke - Phosphorus in coal and coke |
| BS 1016-10-1977 |
煤和焦炭的分析与试验方法.第10部分:煤与焦炭中的砷 |
Methods for analysis and testing of coal and coke - Arsenic in coal and coke |
| BS 2846-5-1977 |
统计数据说明指南.第5部分:均值和方差值测试能力 |
Guide to statistical interpretation of data - Power of tests relating to means and variances |
| BS 2846-6-1976 |
统计数据说明指南.第6部分:配对观察两个均值比较 |
Guide to statistical interpretation of data - Comparison of two means in the case of paired observations |
| BS 3424-14-1985 |
涂覆织物试验.方法16.湿摩擦和干摩擦色牢度及印花耐磨损性测定方法 |
Testing coated fabrics - Method 16 - Methods for determination of colour fastness to wet and dry rubbing and determination of resistance to printwear |
| BS 5801-1979 |
输送机平顶链与其链轮规范 |
Specification for flat-top chains and associated chainwheels for conveyors |
| BS 5816-1979 |
连续式机械装卸设备用的旋叶供料器尺寸规范 |
Specification for dimensions of rotary vane feeders for continuous mechanical handling equipment |
| BS 9220 N004-1971 |
圆形刚性波导管详细规范.标准壁厚.一般应用范围 |
Detail specification for circular rigid waveguide tubing - Standard wall thickness - General application category |
| BS 3618-6-1972 |
采掘术语.第6部分:钻探和爆破 |
Glossary of mining terms - Drilling and blasting |
| BS 11-1985 |
铁轨规范 |
Specification for railway rails |
| BS 5667-17-1979 |
连续式机械装卸设备规范.安全性要求.第17部分:成组货件:连续板式输送机（卧式） |
Specification for continuous mechanical handling equipment - safety requirements - Unit loads: continuous plate conveyors (horizontal) |
| BS 4896-1973 |
纸浆灰分测定方法 |
Method for the determination of ash of pulp |
| BS 5477-1977 |
采用栅格目测法测定字符识别纸中杂质的方法 |
Method for visual assessment, by grid assay, of dirt in paper for character recognition |
| BS 5879-1980 |
纸浸水后尺寸变化的测量方法 |
Method for measurement of dimensional change of paper after immersion in water |
| BS 4808-1-1972 |
电信用带聚氯乙烯绝缘和聚氯乙烯绝缘护套的低频电线及电缆规范.第1部分:一般要求和试验 |
Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - General requirements and tests |
| BS 4808-2-1972 |
电信用带聚氯乙烯绝缘和聚氯乙烯绝缘护套的低频电线及电缆规范.第2部分:单股无屏蔽实心或绞合设备线 |
Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Equipment wires with solid or stranded conductors, unscreened, single |
| BS 5667-16-1979 |
连续式机械装卸设备规范.安全性要求.第16部分:成组货件:板条链式输送机 |
Specification for continuous mechanical handling equipment - safety requirements - Unit loads: slat band chain conveyors |
| BS 4151-1967 |
输入信号为 3至15磅/平方英寸(压力计)的气动阀定位器的评定方法 |
Method of evaluating pneumatic valve positioners with input signal of 3 to 15 lbf/in2 (gauge) |
| BS 5881-1980 |
单层实心纤维板重量测定方法 |
Method for determination of grammage of single layers of solid fibreboard |
| BS 6035-2-1982 |
纸浆湿强度测定方法.第2部分:'加拿大标准'打浆度法 |
Methods for determination of the drainability of pulp - 'Canadian Standard' freeness method |
| BS 6392-4-1983 |
工业用乙醇试验.第4部分:醛含量的测定方法 |
Testing of ethanol for industrial use - Method for determination of aldehydes content |
| BS 5194-3-1985 |
外科器械.第3部分:解剖镊规范 |
Surgical instruments - Specification for dissecting forceps |
| BS 1752-1983 |
实验室烧结或熔结过滤器(包括气孔率分级)规范 |
Specification for laboratory sintered or fritted filters including porosity grading |
| BS 4521-2-1975 |
私营铁路道岔规范.第2部分:英国铁路机车不运行的、轴负荷不超过10吨的轻型平底钢轨岔道 |
Specification for railway turnouts for private users - Light grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 10 tons, using flat bottom rails |
| BS 4521-3.1-1974 |
私营铁路道岔规范.第3部分:英国铁路机车不运行的、轴负荷不超过25吨的中型道岔.第1节:工字钢轨道岔 |
Specification for railway turnouts for private users - Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons - Turnouts using bull head rail |
| BS 5086-4-1985 |
黄油分析.第4部分:盐含量测定方法(比对法) |
Analysis of butter - Method for determination of salt content (reference method) |
| BS 6319-7-1985 |
建筑用合成树脂胶料试验.第7部分:拉伸强度测试方法 |
Testing of resin and polymer/cement compositions for use in construction - Method for measurement of tensile strength |
| BS 5194-4-1985 |
外科器械.第4部分:小剪刀、大剪刀和其他带关节切割器械 |
Surgical instruments - Specification for scissors, shears and other jointed cutting instruments |
| BS 6392-8-1983 |
工业用乙醇试验.第8部分:酯含量的测定方法 |
Testing of ethanol for industrial use - Method for determination of esters content |
| BS ISO 2382-18-1990 |
信息处理系统.词汇.第18部分:分布式数据处理 |
Information processing systems - Vocabulary - Distributed data processing |
| BS ISO 2382-1990 |
信息处理系统.词汇.模拟计算 |
Information processing systems. Vocabulary. Analog computing |
| BS 3087-1-1991 |
夹扭钳与剪断钳.第1部分:总则 |
Pliers and nippers - General introduction |
| BS 6392-9-1983 |
工业用乙醇试验.第9部分:用高锰酸盐退色时间的方法来测定乙醇含量 |
Testing of ethanol for industrial use - Method for determination of permanganate time |
| BS 5667-9-1979 |
连续式机械装卸设备规范.安全性要求.第9部分:松散物料:散料抛掷机 |
Specification for continuous mechanical handling equipment - safety requirements - Loose bulk materials: bulk throwing machines |
| BS 4791-1985 |
量热计弹规范 |
Specification for calorimeter bombs |
| BS 9075 N024-1978 |
固定式单片陶瓷介质电容器详细规范(2C1型).单面中心引线矩形非金属壳体.全面评定级 |
Detail specification for fixed monolithic ceramic dielectric capacitors (type 2C1) - Rectangular non-metallic case, centred wires on one face - Full assessment level |
| BS 9300 C377-378-1971 |
硅同轴混合二极管详细规范 |
Detail specifications for silicon coaxial mixer diodes |
| BS 9300 C379-388-1971 |
安装于硅螺杆上的大功率整流器二极管详细规范 |
Detail specifications for silicon stud mounted, power rectifier diodes |
| BS 9300 C405-429-1971 |
硅稳压器二极管详细规范 |
Detail specifications for silicon voltage-regulator diodes |
| BS 6395-1983 |
目测织物疵点记数方法 |
Method for numerical designation of fabric faults by visual inspection |
| BS MA 57-1975 |
船用甲板机械规范.绳索贮存卷筒 |
Specification for ships' deck machinery - rope storage reels |
| BS 6043-1.8-1986 |
制铝工业用炭素材料取样与试验方法.第1部分:电极硬柏油脂.第8节:灰分测定 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of ash |
| BS 6722-1986 |
金属材料尺寸推荐规范 |
Recommendations for dimensions of metallic materials |
| BS 5667-10-1979 |
连续式机械装卸设备规范.安全性要求.第10部分:松散物料:立式螺旋输送机 |
Specification for continuous mechanical handling equipment - safety requirements - Loose bulk materials: vertical screw conveyors |
| BS 5667-12-1979 |
连续式机械装卸设备规范.安全性要求.第12部分:成组货件:带卧轴的移动板条(金属或木材)式输送机 |
Specification for continuous mechanical handling equipment - safety requirements - Unit loads: mobile slat conveyors (metal or wood) with horizontal shafts |
| BS 5769-1-1979 |
信息交换用磁带和带盒标记和文件结构规范.第1部分:标准标记 版本１ |
Specification for magnetic tape cassette and cartridge labelling and file structure, for information interchange - Label standard version 1 |
| BS 3936-2-1990 |
苗圃.第2部分:玫瑰规范 |
Nursery stock - Specification for roses |
| BS 4140-1986 |
氧化铝的试验方法.第19部分:硼含量的测定 |
Methods of test for aluminium oxide. Determination of boron content |
| BS 3935-1991 |
牛皮革和犊皮革分类和标记指南 |
Guide to classification and marking of cattle hides and calfskins |
| BS EN 150003-1976 |
电子元器件质量评定协调体系规范.空白详细规范.低频放大用管壳额定双极晶体管 |
Specification for harmonized system of quality assessment for electronic components - Blank detail specification: case-rated bipolar transistors for low frequency amplification |
| BS CECC 41100-1978 |
电子元器件用质量评估协调体系.分规范.导螺杆传动和旋转式预调电位器 |
Harmonized system of quality assessment for electronic components: sectional specification: lead screw actuated and rotary preset potentiometers |
| BS CECC 41101-007-1985 |
导螺杆传动非线绕预调电位器协调空白详细规范.正方形的容器密闭的与电阻元件绝缘的驱动装置、每个行程终止 |
Harmonized blank detail specification for lead screw actuated non-wirewound preset potentiometers - Square form, container sealed, actuating device insulated from resistive element, slipping clutch at each end of travel, rigid terminations - Assessment le |
| BS 6750-1986 |
建筑用模数配合规范 |
Specification for modular coordination in building |
| BS 6356-3-1985 |
农作物防护用喷雾设备.第3部分:连接旋压螺纹尺寸规范 |
Spraying equipment for crop protection - Specification for dimensions of connection threading |
| BS AU 214-3-1988 |
变速箱法兰.第3部分:商用车辆和公共汽车S型齿轮箱法兰尺寸规范 |
Gearbox flanges - Specification for dimensions for type S gearbox flanges for commercial vehicles and buses |
| BS 903-A9-1988 |
橡胶的物理试验.第A9部分:耐磨性的测定 |
Physical testing of rubber - Determination of abrasion resistance |
| BS 3221-6-1987 |
药用量具.第6部分:5ml药用立式塑料量匙规范 |
Medicine measures - Specification for free-standing plastics medicine measuring spoons of 5 mL capacity |
| BS 5892-5-1987 |
铁路车辆材料(米制).第5部分:轮箍式车轮扣环用钢棒规范 |
Railway rolling stock material (metric) - Specification for steel bars for retaining rings for tyred wheels |
| BS 1133-7.6-1988 |
包装规程.第7节:纸和纸板包装物、袋和包装箱.第6小节:模压纸浆包装 |
Packaging code - Paper and board wrappers, bags and containers - Moulded pulp packaging |
| BS 2819-1990 |
机织物和针织物的弓纬、纬斜和纵向扭变的测定方法 |
Methods for determination of bow, skew and lengthway distortion in woven and knitted fabrics |
| BS 302-5-1987 |
绞股钢丝绳.第5部分:牵引用钢丝绳规范 |
Stranded steel wire ropes - Specification for ropes for hauling purposes |
| BS AU 216-1-1987 |
道路车辆用石油基制动液的液压制动系统.第1部分:石油基基准液规范 |
Hydraulic brake systems using petroleum base brake fluids for road vehicles - Specification for petroleum base reference fluid |
| BS 2015-1992 |
涂料和有关术语词汇 |
Glossary of paint and related terms |
| BS 576-1-1988 |
工业用乙酸.第1部分:乙酸规范 |
Acetic acid for industrial use - Specification for acetic acid |
| HB 10189-2001 |
ISO 9001-2000简介 |
ISO 9001:2000 in Brief |
| BS 2767-1991 |
散热器用手动控制铜合金阀的规范 |
Specification for manually operated copper alloy valves for radiators |
| BS 5139-1991 |
通用模塑和挤塑聚丙烯和丙烯共聚物材料规定方法 |
Method of specifying general purpose polypropylene and propylene copolymer materials for moulding and extrusion |
| BS 4834-1990 |
使用固体矿物燃料的带锅炉或不带锅炉的嵌入式无对流明火加热器规范 |
Specification for inset open fires without convection with or without boilers, burning solid mineral fuels |
| BS 4727-2 Group 04-1991 |
电工、电力、电信、电子学、照明和颜色术语.第2部分:电力工程专用术语.第04集:变压器和电抗器 |
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms - Terms particular to power engineering - Power transformers and reactors |
| BS 5866-2-1991 |
公共部门用毯子.第2部分:纱罗多孔棉毯规范 |
Blankets suitable for use in the public sector - Specification for cotton leno cellular blankets |
| BS 5866-3-1991 |
公共部门用毯子.第3部分:多孔合成纤维毯规范 |
Blankets suitable for use in the public sector - Specification for synthetic fibre cellular blankets |
| BS 5540-7-1991 |
液压油颗粒污染评定.第7部分:污染等级测定方法(称重法) |
Evaluating particulate contamination of hydraulic fluids - Method of determining the level of contamination (by the gravimetric method) |
| BS 7317-2-1990 |
高纯度铜阴极Cu-CATH-1分析方法.第2部分:采用不连续体积喷雾原子吸收分光光度法对铬、钴、铁、镍和锌的测定 |
Methods for analysis of high purity copper cathode Cu-CATH-1 - Method for determination of chromium, cobalt, iron, nickel and zinc by discrete volume nebulization atomic absorption spectrophotometry |
| BS 4966-1991 |
炼焦炉用硅质耐火材料规范 |
Specification for silica refractories for use in coke ovens |
| PD 6564-1992 |
修改件(草案):BS 6789 Sec.6.1-86"某些公共交换电话网用单功能或多种特别功能装置.第6部分:串联装置规范.第 |
A draft amendment to BS 6789:Section 6.1:1986 "Apparatus with one or more particular functions for connection to certain public switched telephone networks. Part 6. Specification for series connected apparatus. Section 6.1. Apparatus having maximum allowa |
| BS 3424-34-1992 |
涂覆织物试验方法.第34部分:方法37:水蒸气渗透系数 (WVPI)测定方法 |
Testing coated fabrics - Method 37 - Method for determination of water vapour permeability index (WVPI) |
| BS 4367-1968 |
硝酸的试验方法 |
Methods of test for nitric acid |
| BS 4585-6-1992 |
香料和调味品试验方法.第6部分:非挥发性乙醚萃取物测定 |
Methods of test for spices and condiments - Determination of non-volatile ether extract |
| BS ISO 4308-1-2003 |
起重机和提升设备.钢丝绳的选用.总则 |
Cranes and lifting appliances - Selection of wire ropes - General |
| BS ISO 16269-8-2004 |
数据的统计说明.预测差异的测定 |
Statistical interpretation of data - Determination of prediction intervals |
| BS EN 15179-2007 |
|
Railway applications - Braking - Requirements for the brake system of coaches |
| BS 5502-60-1992 |
农用建筑物和构筑物.第60部分:磨菇形建筑物设计和施工惯例 |
Buildings and structures for agriculture - Code of practice for design and construction of buildings for mushrooms |
| BS EN 2-1992 |
火灾的分类 |
Classification of fires |
| BS 3748-1992 |
纸张和纸板抗弯张度的测定方法 |
Method for determination of resistance to bending of paper and board |
| BS 3900-E2-1992 |
涂料试验方法.第E2部分:刮痕试验 |
Methods of test for paints. Scratch test |
| CP 143-10-1973 |
薄板屋顶和墙覆料实施规程.镀锌波纹钢.米制单位 |
Code of practice for sheet roof and wall coverings. Code of practice for sheet roof and wall coverings. Galvanized corrugated steel. Metric units |
| CP 143-12-1970 |
薄板屋顶和墙覆料实施规程.铜.米制单位 |
Code of practice for sheet roof and wall coverings. Code of practice for sheet roof and wall coverings. Copper. Metric units |
| BS 5598-2-1979 |
卤代烃取样和试验方法.第2部分:液化气取样 |
Methods of sampling and test for halogenated hydrocarbons - Sampling of liquefied gases |
| BS 697-1986 |
电工用橡胶手套规范 |
Specification for rubber gloves for electrical purposes |
| BS 3415-1986 |
活动遮光帘规范 |
Specification for venetian blinds |
| BS 4078-1-1987 |
动力作动射钉装置.第1部分:安全使用惯例 |
Powder actuated fixing systems - Code of practice for safe use |
| BS 2000-179-1993 |
石油和石油产品的试验方法.石蜡油的锥入度测定 |
Methods of test for petroleum and its products - Determination of cone penetration of petrolatum |
| BS 2646-1-1993 |
实验室高压灭菌釜.第1部分:设计、制造、安全和性能规范 |
Autoclaves for sterilization in laboratories - Specification for design, construction, safety and performance |
| BS 2646-5-1993 |
实验室高压灭菌釜.第5部分:功能和性能试验方法 |
Autoclaves for sterilization in laboratories - Methods of test for function and performance |
| BS 5772-9-1993 |
电子设备用机电元件规范:基本试验程序和测量方法.第9部分:多种试验 |
Specification for electromechanical components for electronic equipment: basic testing procedures and measuring methods - Miscellaneous tests |
| BS 5098-1992 |
食品感观分析的术语词汇 |
Glossary of terms relating to sensory analysis |
| BS 3175-1959 |
五氯苯酚规范 |
Specification for pentachlorophenol |
| BS 4630-1970 |
氧化三丁基锡规范 |
Specification for tributyltin oxide (di(tributyltin) oxide) |
| BS 4257-1967 |
远程通信和相关电子设备用铁磁氧化物制E形磁芯尺寸的规范 |
Specification for the dimensions of E-cores made of ferromagnetic oxides for use in telecommunication and allied electronic equipment |
| BS 4428-1989 |
一般园林经营管理的实用规程(不包括硬质地面) |
Code of practice for general landscape operations (excluding hard surfaces) |
| BS 6161-1993 |
铝及其合金的阳极氧化镀层的试验方法.第19部分:图象清晰度的测定.仪器测定法 |
Methods of test for anodic oxidation coatings on aluminium and its alloys. Determination of image clarity. Instrumental method |
| BS 4739-2-1979 |
阴极射线示波器特性表示方法.第2部分:存储示波器 |
Method for expression of the properties of cathode-ray oscilloscopes - Storage oscilloscopes |
| BS 3900-J2-1993 |
涂料试验方法.第J2部分:粉末涂层粒径分布筛分测定 |
Methods of test for paints - Testing of coating powders - Determination of particle size distribution of coating powders by sieving |
| BS 6986-2-1988 |
速溶茶的分析.第2部分:自由流动与压实散装密度测定方法 |
Analysis of instant tea - Methods for determination of free-flow and compacted bulk densities |
| BS 9121-1988 |
经质量评定的无线电干扰抑制滤波器的空白详细规范.基本评定级和全面评定级 |
Blank detail specification for radio interference suppression filters of assessed quality - Basic and full assessment levels |
| BS 6258-1988 |
机械加工用空心钢棒规范 |
Specification for hollow steel bars for machining |
| BS CECC 96200-1988 |
电子元器件用质量评估协调体系.包括空白详细规范的分规范:杠杆式开关 |
Harmonized system of quality assessment for electronic components - Sectional specification including blank detail specification: lever switches |
| BS EN 60118-0-1984 |
助听器.电声特性测量方法 |
Hearing aids - Methods for measurement of electroacoustical characteristics |
| BS 7676-2-1993 |
齿轮验收法规.验收试验期间齿轮机构机械振动的测定 |
Acceptance code for gears - Determination of mechanical vibrations of gear units during acceptance testing |
| BS 6394-2-1985 |
乳和乳制品中的微量元素.第2部分:铁含量的测定方法(参考法) |
Trace elements in milk and milk products - Method for the determination of iron content (reference method) |
| BS 6288-9-1989 |
磁带录放系统.第9部分:专业磁带盒规范 |
Magnetic tape sound recording and reproducing systems - Specification for magnetic tape cartridge for professional use |
| BS EN 114000-1984 |
电子元器件质量评定协调体系.通用规范:光电倍增管 |
Harmonized system of quality assessment for electronic components: generic specification: photomultiplier tubes |
| BS 6735-1987 |
农用拖拉机和农机操纵系统位置的有效范围规范 |
Specification for reach volumes for the location of controls on agricultural tractors and machinery |
| DD 203-2-1991 |
工业自动化:车间生产.标准化和方法学基准模型的应用 |
Industrial automation: shop floor production. Application of the reference model for standardization and methodology |
| BS 3047-1988 |
广告画的尺寸规范 |
Specification for sizes of posters |
| BS 4736-1985 |
冷水浸泡织物尺寸变化测定方法 |
Method for determination of dimensional changes of fabrics induced by cold-water immersion |
| BS 6783-4-1986 |
镍、镍铁和镍合金的取样与分析.第4部分:用电热原子吸收光谱测定法测定银、砷、铋、镉、铅、锑、硒、锡、碲 |
Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of silver, arsenic, bismuth, cadmium, lead, antimony, selenium, tin, tellurium and thallium in nickel by electrothermal atomic absorption spectrometry |
| BS 6783-5-1986 |
镍、镍铁和镍合金的取样与分析.第5部分:感应电炉燃烧后用红外吸收法测定镍、镍铁和镍合金中碳的方法 |
Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of carbon in nickel, ferronickel and nickel alloys by infra-red absorption after induction furnace combustion |
| BS 6783-6-1986 |
镍、镍铁和镍合金的取样与分析.第6部分:硫化氢产生后用甲蓝分子吸收光谱测定法测定镍中硫的方法 |
Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of sulphur in nickel by methylene blue molecular absorption spectrometry after generation of hydrogen sulphide |
| BS AU 200-1a-1984 |
载重货车用减少喷溅装置.第1a部分:密封装置的设计规范 |
Spray reducing devices for heavy goods vehicles - Specification for design of containment devices |
| BS 7237-1990 |
微处理器系统二进制浮点算法规范 |
Specification for binary floating point arithmetic for microprocessor systems |
| BS 6808-3-1989 |
坐标测量机.实用规程 |
Coordinate measuring machines - Code of practice |
| BS 6480-1988 |
额定电压在33KV及以下的铅与铅合金护套浸渍纸绝缘的电缆规范 |
Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33000 V |
| BS 6843-2-1988 |
石油燃料的分类.第2部分:工业用和船舶用燃气轮机燃料 |
Classification of petroleum fuels - Gas turbine fuels for industrial and marine applications |
| BS 6958-1-1988 |
采用改进的频率调制在每面80磁道上以7958磁通变换/弧度(ftprad)、5.3tpmm(135tpi)记录的数据交换用90mm(3.5 |
Guide to construction and use of 90 mm (3.5 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 7958 ftprad, 5.3 tpmm (135 tpi) on 80 tracks on each side - Dimensional, physical and magnetic characteristics |
| BS EN 2374-1991 |
玻璃纤维加强的模压件和夹层复合材料.试验板的生产 |
Specification for glass fibre reinforcing mouldings and sandwich composites - Production of test panels |
| BS EN 26927-1991 |
房屋建造.勾缝用品.密封剂.术语 |
Building construction - Jointing products - Sealants - Vocabulary |
| BS CECC 63000-1990 |
电子元器件用质量评估协调体系.一般规范:薄膜和混合式集成电路 |
Harmonized system of quality assessment for electronic components - Generic specification: film and hybrid integrated circuits |
| PD 6529-1990 |
建筑物设计载荷新方法报告 |
Report on a new approach for design loads for buildings |
| BS 7641-1993 |
建筑物的性能标准.面积和空间显示值的计算和定义 |
Performance standards in building - Definition and calculation of area and space indicators |
| BS 7637-1993 |
线性运动、循环球、套管型滚动轴承规范(公制系列) |
Specification for linear motion, recirculating ball, sleeve type rolling bearings (metric series) |
| BS 7642-1993 |
建筑物的性能标准.性能评估标准的内容和格式 |
Performance standards in building - Contents and format of standards for evaluation of performance |
| BS 7327-1-1990 |
小型固定式灭火器.小型固定式哈龙灭火器规范 |
Small fixed fire extinguishers - Specification for small fixed halon fire extinguishers |
| BS 6954-3-1988 |
建筑用公差.第3部分:选择对象尺寸和预配合推荐标准 |
Tolerances for building - Recommendations for selecting target size and predicting fit |
| BS 6319-11-1993 |
建筑用树脂和聚合胶料成分测试.第11部分:压缩和拉伸塑性变形测定方法 |
Testing of resin and polymer/cement compositions for use in construction - Methods for determination of creep in compression and in tension |
| BS 6840-17-1991 |
音响系统设备.第17部分:标准音量指示器特性的规定与测量方法 |
Sound system equipment - Methods for specifying and measuring the characteristics of standard volume indicators |
| BS 7197-1990 |
电力电缆终端连接和电压达36KV系统连接性能规范 |
Specification for performance of bonds for electric power cable terminations and joints for system voltages up to 36 kV |
| BS 7293-1990 |
粒状农药或除莠剂分配设备试验方法 |
Method of test for equipment for distributing granulated pesticides or herbicides |
| BS 7307-1-1990 |
建筑公差.建筑物和建筑产品的测量.第1部分:方法和仪器 |
Building tolerances - Measurement of buildings and building products - Methods and instruments |
| BS 7372-2-1991 |
工业用金属丝网筛和金属丝编织筛布的孔径尺寸和线径的组合选择指南.第2部分:金属丝编织筛布的优选组合 |
Guide to the choice of aperture size and wire diameter combinations for industrial wire screens and woven wire cloth - Preferred combinations for woven wire cloth |
| BS ISO/IEC 8571-5-1991 |
信息处理系统.开放式系统互连.文件输送、存取和管理.第5部分:协议执行一致性陈述形式 |
Information processing systems - Open systems interconnection - File transfer, access and management - Protocol Implementation Conformance Statement Proforma |
| BS 6263-2-1991 |
地板表面的保护与维修.第2部分:弹性地板和花砖地板惯例 |
Care and maintenance of floor surfaces - Code of practice for resilient sheet and tile flooring |
| BS 7164-12-1991 |
生橡胶和硫化橡胶的化学试验.第12部分:用折射指数法测定生苯乙烯-丁二烯、乳胶聚合物中苯乙烯的含量 |
Chemical tests for raw and vulcanized rubber - Determination of bound styrene content of raw styrene-butadiene rubber; emulsion polymerized: refractive index method |
| BS CECC 00111-3-1991 |
程序11的规则.规范.通用和专用(民用和军用)部件CECC规范(详细规范除外)条例 |
Rule of Procedure 11 - Specifications - Regulations for CECC Specifications for components for general and professional (civil and military) usage (excluding detail specifications) |
| BS CECC 00111-4-1991 |
程序11的规则.规范.CECC详细规范条例 |
Rule of Procedure 11 - Specifications - Regulations for CECC detail specifications |
| BS 185-18-1970 |
航空和航天术语词汇.第18节:航天学 |
Glossary of aeronautical and astronautical terms - Astronautics |
| BS 185 Index-1973 |
航空和航天术语词汇.字母顺序索引 |
Glossary of aeronautical and astronautical terms - Alphabetical index |
| BS 6736-1986 |
农用手发信号实用规程 |
Code of practice for hand signalling for use in agricultural operations |
| BS 7403-7-1991 |
内燃机用全流式润滑油滤清器.第7部分:振动疲劳试验方法 |
Full-flow lubricating oil filters for internal combustion engines - Method of test for vibration fatigue |
| BS 7081-1-1989 |
使用IMFM以252次磁通变换/mm(6400次磁通变换/in)速率录制的数据交换用6.30mm(0.25in)磁带盒的使用和制造指 |
Guide to construction and use of 6.30 mm (0.25 in) magnetic tape cartridge using IMFM for data interchange, recording at 252 ftpmm (6400 ftpi) - Mechanical, physical and magnetic properties |
| BS 4276-1968 |
线材、棒材和管材压延冲模的硬质金属规范 |
Specification for hard metal for wire, bar and tube drawing dies |
| BS 4358-1968 |
空气计量术语词汇(附有技术注释) |
Glossary of terms used in air gauging with notes on the technique |
| BS 5834-1-1985 |
燃气和给水厂用地面控制器和防护器及地下室.第1部分:包括基本构件的防护装置规范 |
Surface boxes, guards and underground chambers for gas and waterworks purposes - Specification for guards, including foundation units |
| BS 3900-B10-1986 |
涂料试验方法.第B集:液体涂料与干涂料膜化学检验.第10部分:固态六价铬含量测定 |
Methods of test for paints - Tests involving chemical examination of liquid paints and dried paint films - Determination of hexavalent chromium content of solid matter |
| BS 3900-B11-1986 |
涂料试验方法.第B11集:液体涂料与干涂料膜化学检验.第11部分:液态铬总含量测定 |
Methods of test for paints - Tests involving chemical examination of liquid paints and dried paint films - Determination of total chromium content of liquid matter |
| BS 5667-7-1979 |
连续式机械装卸设备规范.安全性要求.第7部分:松散物料:旋转鼓式给料机和旋转叶轮给料机 |
Specification for continuous mechanical handling equipment - safety requirements - Loose bulk materials: rotary drum feeders and rotary vane feeders |
| BS 6043-2.6-1986 |
制铝工业用炭素材料取样与试验方法.第2部分:电极用焦炭.第6节:焙烧焦炭二甲苯密度测定 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of the density in xylene of calcined cokes |
| BS AU 203a-1988 |
商用道路车辆的动力输出装置和辅助驱动装置之间联接器尺寸规范 |
Specification for dimensions of couplings between power take offs (PTOs) and ancillary driven units on commercial road vehicles |
| BS AU 214-2-1988 |
变速箱法兰.第2部分:商用车辆和公共汽车A型齿轮箱法兰尺寸规范 |
Gearbox flanges - Specification for dimensions for type A gearbox flanges for commercial vehicles and buses |
| BS 6318-3-1982 |
斗式升降机.第3部分:平后壁深斗升降机尺寸规范 |
Bucket elevators - Specification for dimensions of deep elevator bucket with flat rear wall |
| BS 6521-1984 |
校准圆钢链节起重链正常使用和维修指南 |
Guide for proper use and maintenance of calibrated round steel link lifting chains |
| BS 6347-2-1983 |
农用拖拉机性能评定.第2部分:液压功率和提升能力测定方法 |
Performance assessment of agricultural tractors - Methods for determination of hydraulic power and lifting capacity |
| BS 5242-1-1987 |
液压动力流体气缸筒用管材.第1部分:特别精加工表面的钢管规范 |
Tubes for fluid power cylinder barrels - Specification for steel tubes with specially finished surfaces |
| BS 507-1985 |
工业用乙醇规范 |
Specification for ethanol for industrial use |
| BS 5929-4-1986 |
食品感官分析方法.第4部分:香味型法 |
Methods for sensory analysis of food - Flavour profile methods |
| BS 9300 C199-276-1971 |
硅稳压器二极管详细规范 |
Detail specification for silicon voltage-regulator diodes |
| BS 7033-3-1989 |
拭擦布和抛光布.第3部分:地板擦布和盘碟抹布规范 |
Cleaning and polishing cloths - Specification for floorcloths and dishcloths |
| BS 6413-2-1983 |
润滑剂、工业用油和相关产品(L级).第2部分:F系列的分类(主轴轴承、轴承和相关离合器) |
Lubricants, industrial oils and related products (class L) - Classification for family F (spindle bearings, bearings and associated clutches) |
| BS 4727 Pt.3 Group 08-1985 |
电工、电力、电信、电子学、照明和颜色术语词汇.第3部分:电信和电子学专用术语.第08集:声学与电声学术语 |
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to telecommunications and electronics. Acoustics and electroacoustics terminology |
| BS 6833-1-1987 |
采用无绳附件(不包括蜂窝式无线电话台设备)连接公共开关电话网络模拟接口的设备.第1部分:一般要求规范 |
Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks - Specification for general requirements |
| BS 6669-1-1986 |
银和银合金电镀层的试验方法.第1部分:镀层厚度的测定 |
Methods of test for electroplated silver and silver alloy coatings - Determination of coating thickness |
| BS 4500-5-1988 |
ISO 极值与配合.锥度C从1:3至1:500、长度6mm至630mm的锥形工件锥度公差体系规范 |
ISO limits and fits - Specification for system of cone tolerances for conical workpieces from C = 1:3 to 1:500 and lengths from 6 mm to 630 mm |
| BS 5797-1986 |
电应力和电离作用下绝缘液气泡测定方法 |
Methods for measurement of gassing of insulation liquids under electrical stress and ionization |
| BS 5122-1986 |
低压和中压饱和蒸汽用橡胶软管规范 |
Specification for rubber hoses for low-pressure and medium-pressure saturated steam |
| BS 9493-1981 |
经质量评定的有混频数字和/或模拟功能的集成电路详细规范的制订规则 |
Rules for the preparation of detail specifications for integrated circuits of assessed quality which perform mixed digital and/or analogue functions |
| BS 5834-3-1985 |
燃气和给水厂用地面控制器和防护器及地下室.第3部分:大型地面控制器规范 |
Surface boxes, guards and underground chambers for gas and waterworks purposes - Specification for large surface boxes |
| BS 3592-1-1986 |
软管增强钢丝.第1部分:橡胶软管增强用镀覆圆和扁钢丝规范 |
Steel wire for hose reinforcement - Specification for coated round and flat steel wire for rubber hose reinforcement |
| BS 6057-3.19-1986 |
橡胶乳.第3部分:试验方法.第19节:增强型丁苯橡胶乳结合苯乙烯总含量测定 |
Rubber latices - Methods of test - Determination of total bound styrene content of reinforced styrene-butadiene rubber latices |
| BS 5938-2-1980 |
电信用感应器及变压器铁芯.第2部分:性能规范编制导则 |
Cores for inductors and transformers for telecommunications - Guide to the drafting of performance specifications |
| PD CLC/TR 50126-3-2006 |
|
Railway applications — The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) — Part 3: Guide to the application of EN 50126-1 for rolling stock RAMS |
| PD CEN/TR 15225-2005 |
|
Guidance on Factory Production Control for the CE Marking (Attestation of Conformity 2+) of designed masonry mortars |
| BS EN 301-2006 |
|
Adhesives, phenolic and aminoplastic, for loading bearing timber structures - Classification and performance requirements |
| BS 7033-2-1989 |
拭擦布和抛光布.第2部分:清洁或润滑用再生材料和废纺纱的工业擦拭物规范 |
Cleaning and polishing cloths - Specification for industrial wipers from reclaimed materials, and waste yarn for cleaning and lubricating purposes |
| BS 5754-1987 |
煤矿用电模拟与状态信号规范 |
Specification for electrical analogue and state signals for use in coal mines |
| BS MA 87-3-1987 |
系列1船载驳船.第3部分:吊杆铸件的排列、尺寸和试验方法规范 |
Series 1 shipborne barges - Specification for the arrangement, dimensions and method of test for lifting post castings |
| BS 4267-6-1987 |
硝酸铵.第6部分:含水量测定方法 |
Ammonium nitrate - Method for determination of water content |
| BS 4267-7-1987 |
硝酸铵.第7部分:亚硝酸盐含量测定方法 |
Ammonium nitrate - Methods for determination of nitrite content |
| BS 4267-8-1987 |
硝酸铵.第8部分:氯化物含量的测定方法 |
Ammonium nitrate - Methods for determination of chloride content |
| BS 4267-9-1987 |
硝酸铵.第9部分:硫酸盐含量测定方法 |
Ammonium nitrate - Method for determination of sulphate content |
| BS 5833-1988 |
鞋类标签配置 |
Scheme for labelling of footwear |
| BS 6843-3-1988 |
石油燃料的分类.第3部分:液化石油气体 |
Classification of petroleum fuels - Liquefied petroleum gases |
| BS 6613-1985 |
弹性轴联接器特性规定方法 |
Methods for specifying characteristics of resilient shaft couplings |
| BS 6954-1-1988 |
建筑用公差.第1部分:评估基本原则和规范的推荐标准 |
Tolerances for building - Recommendations for basic principles for evaluation and specification |
| BS AU 200-2a-1984 |
载重货车用减少喷溅装置.第2a部分:灭火材料及设备和空气/水分离材料及及设备性能规范 |
Spray reducing devices for heavy goods vehicles - Specification for performance of suppression material and devices, and air/water separating material and devices |
| BS 6849-1987 |
输送机用落锻无铆钉链规范 |
Specification for drop-forged rivetless chains for conveyors |
| BS 5815-2-1988 |
公共部门用床单、被单、枕套、毛巾、餐巾、床罩和大陆人用被罩.第2部分:毛巾及餐巾规范 |
Sheets, sheeting, pillowslips, towels, napkins, counterpanes and continental quilt secondary covers suitable for use in the public sector - Specification for towels and napkins |
| BS 5944-5-1985 |
液压系统和部件气动噪音测量.第5部分:使消声室测定液压泵声功率等级的简易方法 |
Measurement of airborne noise from hydraulic fluid power systems and components - Simplified method of determining sound power levels from pumps using an anechoic chamber |
| BS E9375-1975 |
电子元器件质量评定协调体系规范.空白详细规范:除精密电压温度补偿基准二极管之外的调压二极管和电压基准二 |
Specification - Harmonized system of quality assessment for electronic components - Blank detail specification: voltage regulator diodes and voltage reference diodes excluding precision-voltage temperature-compensated reference diodes |
| BS 2589-1955 |
铁路轨道扳手规范 |
Specification for railway track spanners |
| BS 6379-1-1983 |
咖啡和咖啡制品的取样.第1部分:袋装绿色咖啡豆的取样方法 |
Sampling of coffee and coffee products - Method of sampling green coffee in bags |
| BS 6379-3-1983 |
咖啡和咖啡制品的取样.第3部分:绿色咖啡豆取样用咖啡豆取样器规范 |
Sampling of coffee and coffee products - Specification for a coffee trier for sampling green coffee |
| BS 5383-1986 |
采用连续字符标记法的钢镍合金及钛合金管材标志与钢管颜色编码规范 |
Specification for material identification of steel, nickel alloy and titanium alloy tubes by continuous character marking and colour coding of steel tubes |
| BS 3423-1986 |
实验室用玻璃真空器(包括干燥器)的设计推荐规范 |
Recommendations for design of glass vacuum vessels (including desiccators) for laboratory use |
| BS 5667-2-1979 |
连续式机械装卸设备规范.安全性要求.第2部分:松散物料:气动装卸装置 |
Specification for continuous mechanical handling equipment - safety requirements - Loose bulk materials: pneumatic handling installations |
| BS 3618-10-1967 |
采矿术语词汇.运输 |
Glossary of mining terms - Transport |
| BS 3958-3-1985 |
隔热材料.金属网面人造矿物纤维垫 |
Thermal insulating materials - Metal mesh faced man-made mineral fibre mattresses |
| BS 6043-2.7-1986 |
制铝工业用炭素材料取样与试验方法.第2部分:电极用焦炭.第7节:焙烧焦炭表观油含量测定(重量法) |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of the apparent oil content of calcined cokes (gravimetric method) |
| BS MA 105-1-1987 |
系列3船载驳船.第1部分:主要尺寸规范 |
Series 3 shipborne barges - Specification for main dimensions |
| BS MA 105-3-1987 |
系列3船载驳船.第3部分:通风装置的主要配合尺寸规范 |
Series 3 shipborne barges - Specification for principal mating dimensions for the ventilating system |
| BS 4264-1987 |
商业、公务及专业用信封规范 |
Specification for envelopes for commercial, official and professional use |
| BS 1571-2-1975 |
容积式压缩机与排气机的试验.第2部分:空气压缩机与排气机的简化验收方法 |
Specification for testing of positive displacement compressors and exhausters - Methods for simplified acceptance testing for air compressors and exhausters |
| BS 6646-1985 |
纺织物灰粉测定方法 |
Method for determination of ash of textiles |
| BS 4140-5-1986 |
氧化铝试验方法.第5部分:二氧化硅含量测定 |
Methods of test for aluminium oxide - Determination of silica content |
| BS 4140-7-1986 |
氧化铝试验方法.第7部分:铁含量测定 |
Methods of test for aluminium oxide - Determination of iron content |
| BS 5863-1-1984 |
过程控制系统模拟信号.第1部分:直流信号规范 |
Analogue signals for process control systems - Specification for direct current signals |
| BS 5863-2-1980 |
过程控制系统模拟信号.第2部分:直流电压信号规范 |
Analogue signals for process control systems - Specification for direct voltage signals |
| BS 5935-1980 |
磁性软材料制环形带绕铁芯规范 |
Specification for toroidal strip-wound cores made of magnetically soft material |
| BS 1704-1985 |
普通固体杆式温度计规范 |
Specification for solid-stem general purpose thermometers |
| BS 185-13-1972 |
航空和航天术语词汇.第13节:空中交通管制和地面服务设施 |
Glossary of aeronautical and astronautical terms - Air-traffic and ground services |
| BS 185-14-1972 |
航空和航天术语词汇.第14节:无线电通讯和无线电定位 |
Glossary of aeronautical and astronautical terms - Radiocommunication and radiolocation |
| BS 9364 N011-1978 |
小功率硅P-N-P型开关晶体管详细规范.65V、平面外延、额定环境条件、密封封装、全面附加评定级 |
Detail specification for low power silicon p-n-p switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level |
| BS 9364 N013-1979 |
小功率硅P-N-P型开关晶体管详细规范.25V、平面外延、额定环境条件、密封封装、全面附加评定级 |
Detail specification for low power silicon p-n-p switching transistors - 25 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level |
| BS 9364 N016-1979 |
小功率硅P-N-P型开关晶体管详细规范.65V、平面外延、额定环境条件、密封封装.全面附加评定级 |
Detail specification for low power silicon n-p-n switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level |
| BS 6523-1984 |
实验室用玻璃烧杯规范 |
Specification for glass beakers for laboratory use |
| BS 1794-1952 |
温度记录仪器用记录范围规范 |
Specification for chart ranges for temperature recording instruments |
| BS 4877-1972 |
核反应堆仪表的一般原理推荐标准 |
Recommendations for general principles of nuclear reactor instrumentation |
| BS 5210-1975 |
闪烁器的标准尺寸规范 |
Specification for standard dimensions of scintillators |
| BS 3618-3-1971 |
采掘术语.第3部分:钻孔和探测 |
Glossary of mining terms - Boring and exploration |
| BS 4570-1985 |
钢铸件的熔焊技术规范 |
Specification for fusion welding of steel castings |
| BS 6048-1987 |
红茶规范 |
Specification for black tea |
| BS 6670-5-1986 |
金和金合金电镀层的试验方法.第5部分:粘合力试验 |
Methods of test for electroplated gold and gold alloy coatings - Adhesion tests |
| BS 5905-1980 |
计算机程序设计语言CORAL66规范 |
Specification for computer programming language CORAL 66 |
| BS AU 217-1a-1987 |
机动车辆用最大道路行驶速度限制器.第1a部分:安装要求规范 |
Maximum road speed limiters for motor vehicles - Specification for installed requirements |
| BS 845-1-1987 |
蒸汽、热水和高温传热流体用锅炉热性能的估算方法.第1部分:简明方法 |
Methods for assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids - Concise procedure |
| BS 598 Pt.101-1987 |
道路和其他铺砌区用沥青混合料的取样和检查.第101部分:分析样品的预处理方法 |
Sampling and examination of bituminous mixtures for roads and other paved areas. Methods for preparatory treatments of samples for analysis |
| BS 4779-1971 |
光学器件的光学传递函数测量推荐标准 |
Recommendations for measurement of the optical transfer function of optical devices |
| BS 3618-1-1969 |
采掘术语.第1部分:计划和测量 |
Glossary of mining terms - Planning and surveying |
| BS 3618-2-1971 |
采掘术语.第2部分:通风 |
Glossary of mining terms - Ventilation |
| BS 3166-1959 |
温度范围为-20-220°F(-30-105℃)用温度记录器(注入液体型与蒸汽压力型)规范 |
Specification for thermographs (liquid-filled and vapour pressure types) for use within the temperature range -20 °F to 220 °F ( -30 °C to 105 °C) |
| BS 6669-3-1989 |
银和银合金电镀层的试验方法.第3部分:残留盐的检测 |
Methods of test for electroplated silver and silver alloy coatings - Detection of residual salts |
| BS 812-124-1989 |
集料试验.第124部分:冻胀的测定方法 |
Testing aggregates - Method for determination of frost-heave |
| BS 185-15-1972 |
航空和航天术语词汇.第15节:气象学 |
Glossary of aeronautical and astronautical terms - Meteorology |
| BS 9612 N009-1977 |
经质量评定的振荡器用冷焊封石英晶体振子详细规范.DN、DQ和DP外壳,50至125MHz频率规范.窄温范围(非温控)操 |
Detail specification for cold welded seal quartz crystal units for oscillator applications - DN, DQ and DP enclosures, 50 to 125 MHz frequency range - Fifth overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature c |
| BS 9612 N016-1979 |
振荡器用冷焊密封石英晶体振子详细规范.DN、D2、DQ和DP外壳、0.8至20MHz和3.0到30MHz频率范围.宽温范围(非 |
Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode, AT-cut, for operation over wide temperatu |
| BS 3951-1.2-1985 |
货运集装箱.第1部分:总则.第2节:系列1货运集装箱角件规范 |
Freight containers - General - Specification for corner fittings for series 1 freight containers |
| BS 3618-4-1971 |
采掘术语.第4部分:排水 |
Glossary of mining terms - Drainage |
| BS 5060-1987 |
回风电扇及调节器的性能和结构规范 |
Specification for performance and construction of electric circulating fans and regulators |
| BS 1940-1987 |
工业用丁酮(乙基甲基酮)规范 |
Specification for butanone (ethyl methyl ketone) for industrial use |
| BS 5078-1974 |
钻模及夹具部件规范 |
Specification for jig and fixture components |
| BS 5138-1974 |
成品机制整体锻造和落锻冲压曲轴的磁粉探伤规范 |
Specification for magnetic particle flaw inspection of finished machined solid forged and drop stamped crankshafts |
| BS 6429-1989 |
BS4730(ISO646)和BS6692Pt.2(ISO6937-2)与CCITT第2号国际电报(ITA2)字母两种编码字符集之间的转换方法 |
Method for conversion between the two coded character sets of BS 4730 (ISO 646) and BS 6692:Part 2 (ISO 6937-2) and the CCITT international telegraph alphabet No. 2 (ITA 2) |
| BS 4656-36-1987 |
机床精度及试验方法.第36部分:龙门铣床规范 |
Accuracy of machine tools and methods of test - Specification for plano-milling machines, portal type |
| BS 6327-1982 |
往复式内燃机防火规范 |
Specification for fire protection of reciprocating internal combustion engines |
| BS 6645-1985 |
亚麻料碱溶性的测定方法 |
Method for determination of alkali solubility of flax materials |
| BS AU 201-2-1985 |
继电器和闪光灯.第2部分:道路车辆继电器终端配置与功能属性规范 |
Relays and flashers - Specification for arrangement and functional attribution of relay terminals for road vehicles |
| BS 4641-1986 |
对工程用铬电镀层进行规范的方法 |
Method for specifying electroplated coatings of chromium for engineering purposes |
| BS 4764-1986 |
粉末水泥涂料规范 |
Specification for powder cement paints |
| BS 508-1-1986 |
工业用丁醇.第1部分:丁醇规范 |
Butan-1-ol for industrial use - Specification for butan-1-ol |
| BS 4429-1987 |
一般工程、起重和吊管器用菘紧螺钉和螺旋扣规范 |
Specification for rigging screws and turnbuckles for general engineering, lifting purposes and pipe hanger applications |
| BS 6043-2.8-1987 |
制铝工业用炭素材料取样与试验方法.第2部分:电极用焦炭.第8节:用焙烧焦炭溶剂萃取法测定油含量 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of oil content by solvent extraction of calcined coke |
| BS 6591-1985 |
采矿用链式输送机的刮土机挡板规范 |
Specification for scraper bars for chain conveyors for mining |
| BS 1892-2.11-1989 |
体育器械.特殊要求.训练和比赛用网和支承滑轨规范 |
Gymnasium equipment - Particular requirements - Specification for practice and games netting and supporting trackways |
| BS 879-1-1985 |
水井套管.第1部分:井套管用钢管规范 |
Water well casing - Specification for steel tubes for casing |
| BS MA 2-4-1985 |
磁罗盘及罗盘座规范.第4部分:名词术语 |
Magnetic compasses and binnacles - Glossary of terms |
| BS 3459-1985 |
制图板支架规范 |
Specification for stands for drawing boards |
| BS 5308-1-1986 |
仪器用电缆.第1部分:聚乙烯绝缘电缆规范 |
Instrumentation cables - Specification for polyethylene insulated cables |
| BS 5308-2-1986 |
仪器用电缆.第2部分:聚氯乙烯绝缘电缆规范 |
Instrumentation cables - Specification for PVC insulated cables |
| BS 3618-11-1967 |
采掘术语.第11部分:地层控制 |
Glossary of mining terms - Strata control |
| BS 3056-4-1985 |
耐火砖尺寸.第4部分:电弧炉顶用耐火砖规范 |
Sizes of refractory bricks - Specification for bricks for electric arc furnace roofs |
| BS 3900-F10-1985 |
涂料试验方法.第F集:涂料膜耐久性试验.第10部分:海洋环境中涂层耐阴极解粘合性测定 |
Methods of test for paints - Determination of resistance to cathodic disbonding of coatings for use in marine environments |
| BS 5540-3-1978 |
评定液压油颗粒物污染规范.第3部分:瓶装油液取样方法 |
Specification for evaluating particulate contamination of hydraulic fluids - Methods of bottling fluid samples |
| BS 5543-1978 |
真空技术-图形符号 |
Vacuum technology - graphical symbols |
| BS 5639-1-1978 |
叉车货叉.第1部分:钩接式叉杆术语 |
Fork arms for fork lift trucks - Vocabulary for hook-on type fork arms |
| BS 6713-1-1986 |
防爆系统.第1部分:空气中易燃粉尘爆炸指数的测定方法 |
Explosion protection systems - Method for determination of explosion indices of combustible dusts in air |
| BS 5283-1986 |
消毒剂的名词术语词汇 |
Glossary of terms relating to disinfectants |
| BS 4505-1-1981 |
数字数据传输.第1部分:基本型控制程序规范 |
Digital data transmission - Specification for basic mode control procedures |
| BS 4505-3-1981 |
数字数据传输.第3部分:信息报文误差纵向奇偶检测法 |
Digital data transmission - Method for use of longitudinal parity to detect errors in information messages |
| BS 3711-1964 |
铁路用滚圈式真空制动气缸规范 |
Specification for railway vacuum brake cylinders, rolling ring type |
| BS 3455-1973 |
核科学技术术语 |
Glossary of terms used in nuclear science and technology |
| BS 476-24-1987 |
建筑材料和结构的燃烧试验.第24部分:通风管道耐火性的测定方法 |
Fire tests on building materials and structures - Method for determination of the fire resistance of ventilation ducts |
| BS 3424-20-1987 |
涂覆织物试验.第20部分:方法23.无拉力机械松弛尺寸变化测定方法 |
Testing coated fabrics - Method 23 - Method for determination of dimensional changes on mechanical relaxation at zero tension |
| BS AU 163a-1985 |
道路车辆用气压制动设备压力试验连接规范 |
Specification for pressure test connection for compressed-air pneumatic braking equipment for road vehicles |
| BS 9210 N007-2-1976 |
射频连接器(SMB型)的详细规范.不密封、焊接、静态接触、50Ω、连接扣.控制图.配合面详图和测量数据 |
Detail specification for radio frequency connectors (type SMB) - Unsealed, soldered, captive contact, 50 ohms, snap-on couplings - Control drawings - Mating face details and gauge information |
| BS 9210 N0009-2-1978 |
射频连接器(SMA系列)详细规范.不密封、焊接、静态接触、50Ω、螺纹连接.控制图.配合面详图和测量数据 |
Detail specification for radio frequency connectors (series SMC) - Unsealed, soldered, captive contact, 50 ohms, screw coupling - Control drawings - Mating face details and gauge information |
| BS 5708-1979 |
果树修枝剪刀(修树剪)规范 |
Specification for pruner shears (secateurs) |
| BS 3731-1987 |
V 形块规范 |
Specification for vee blocks |
| BS 6989-1989 |
松散型物料储存设备的安全指南 |
Guide to safety of storage equipment for loose bulk materials |
| BS 4651-4-1988 |
氨溶液.第4部分:加热至 850℃后残余物测定方法 |
Ammonia solution - Method for determination of residue after heating at 850 °C |
| BS 5885-1-1988 |
自动燃气燃烧室.第1部分:额定输入功率60kW及以上的燃烧室规范 |
Automatic gas burners - Specification for burners with input rating 60 kW and above |
| BS 4778-2-1991 |
质量术语.第2部分:质量概念和相关定义 |
Quality vocabulary - Quality concepts and related definitions |
| BS EN 2831-1993 |
钢的氢脆性.慢速弯曲试验 |
Hydrogen embrittlement of steels - Test by slow bending |
| BS AU 227-1988 |
商用车辆和公共汽车交流发电机圆轴端头和轮毂尺寸规范 |
Specification for dimensions of cylindrical shaft ends and hubs for alternators for commercial vehicles and buses |
| BS 9612 N004-1977 |
振荡器用冷焊密封石英晶体振子详细规范.DN、47 U/2、DQ和DP外壳、0.8至20MHz和3.0到30MHz频率范围.宽温范围 |
Detail specification for cold welded seal quartz crystal units for oscillator applications - DN, 47 U/2, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode, AT-cut, for operation over wide temperature |
| BS 4044-1989 |
用梳片式纤维长度分析仪图解法测定纤维长度的方法 |
Methods for determination of fibre length by comb sorter diagram |
| BS 3690-1-1990 |
建筑与土木工程用沥青.道路和其他铺砌区用沥青规范 |
Bitumens for building and civil engineering - Specification for bitumens for roads and other paved areas |
| BS 2782-7 Method 721A-1988 |
塑料试验方法. 第7部分:流变性能.试验方法721A:树脂浸渍玻璃纤维测定树脂流失量 |
Methods of testing plastics - Rheological properties - Determination of resin flow from resin impregnated glass fabric |
| BS 3900-A8-1986 |
涂料试验方法.第A8集:液体涂料试验(化学试验除外).第8部分:闪火/非闪火试验(闭杯平衡法) |
Methods of test for paints - Tests on liquid paints (excluding chemical tests) - Test for flash/no flash (closed cup equilibrium method) |
| BS 3900-A9-1986 |
涂料试验方法.第A9集:液体涂料试验(化学试验除外).第9部分:闪点测定(闭杯环平衡法} |
Methods of test for paints - Determination of flashpoint (closed cup equilibrium method) |
| BS 3338-17-1965 |
锡及锡合金的取样及分析方法.第17部分:焊料及轴承用巴比合金中镉含量测定方法(光度测定法) |
Methods for the sampling and analysis of tin and tin alloys - Method for the determination of cadmium in solders and white metal bearing alloys (photometric method) |
| BS 4325-6-1989 |
油料种子残余物分析方法.第6部分:大豆产品脲酶活性测定 |
Methods for analysis of oilseed residues - Determination of urease activity of soya bean products |
| BS 6407-1-1983 |
零售用柜式托盘.第1部分:300Kg承载力的可拆叠的柜式托盘规范 |
Cage pallets for retail use - Specification for collapsible cage pallets rated at 300 kg |
| BS 6401-1983 |
材料生成烟雾的光学比密度的实验室测量方法 |
Method for measurement, in the laboratory, of the specific optical density of smoke generated by materials |
| BS 6466-1984 |
陶瓷纤维炉衬的设计和安装实用规程 |
Code of practice for design and installation of ceramic fibre furnace linings |
| BS E9063-1976 |
电子元器件用质量评估协调体系规范.空白详细规范.工业用加热三极管 |
Specification for harmonized system of quality assessment for electronic components - Blank detail specification: industrial heating triodes |
| BS 6716-1986 |
橡胶性能和类型指南 |
Guide to properties and types of rubber |
| PD 6508-1985 |
BS476第11部分规定的设备详细图纸 |
Detail drawings for the apparatus specified in BS 476:Part 11:1982 |
| BS ISO/IEC 11072-1993 |
信息技术.计算机制图.计算机制图参考模型 |
Information Technology - Computer graphics - Computer Graphics Reference Model |
| BS 5904-1980 |
计算机程序设计语言RTL/2规范 |
Specification for computer programming language RTL/2 |
| BS E9065-1976 |
电子元器件用质量评估协调体系规范.空白详细规范.阳极消耗可达1kW的小功率发射管 |
Specification for harmonized system of quality assessment for electronic components - Blank detail specification: small power transmitting tubes of anode dissipation up to 1 kW |
| BS AU 152-1970 |
车辆尾端标记牌规范 |
Specification for rear marking plates for vehicles |
| BS 6215-2-1981 |
农业食品试验方法.第2部分:粗纤维含量测定(改进的沙勒法) |
Methods of test for agricultural food products - Determination of crude fibre content (modified Scharrer method) |
| BS 4258-9-1989 |
工业用磷酸(正磷酸)试验方法.第9部分:氯化物含量测定 |
Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of chloride content |
| BS 2782-1 Method 130D-1993 |
塑料试验方法.第1部分:热性能.方法130D:电位计法测定聚氯乙烯热稳定性 |
Methods of testing plastics - Thermal properties - Determination of the thermal stability of polyvinyl chloride by the potentiometric method |
| BS 2782-4 Method 451B-1978 |
塑料的试验方法.化学性能.酚醛模制材料在模制后丙酮可溶物的测定 |
Methods of testing plastics - Chemical properties - Determination of acetone-soluble matter in phenolic moulding materials after moulding |
| BS 3900-D6-1982 |
涂料试验方法.第D6部分:涂料膜光学试验.浅色涂料在固定扩展速率下的对比率(不透明性)测定(用聚脂薄膜) |
Methods of test for paints - Optical tests on paint films - Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate, using polyester film |
| BS CECC 41000-1977 |
电子元器件用质量评估协调体系.电位器一般规范 |
Harmonized system of quality assessment for electronic components: generic specification for potentiometers |
| BS 6711-1-1986 |
主要由玻璃、瓷料或透明石英制作的实验室器皿相关词汇.第1部分:器皿项目名称 |
Vocabulary relating to laboratory apparatus made essentially from glass, porcelain or vitreous silica - Names for items of apparatus |
| BS CECC 00013-1985 |
电子元器件质量评定协调体系.基本规范:半导体小片的扫描电子显微镜检验 |
Harmonized system of quality assessment for electronic components: basic specification: scanning electron microscope inspection of semiconductor dice |
| BS 9751-1979 |
全面评定级固定式绝缘(无屏蔽)射频电感器空白详细规范 |
Blank detail specification for fixed insulated (unshielded) r.f. inductors at the full assessment level |
| BS 8201-1987 |
木材、木制品和木基板材地板材料实用规程 |
Code of practice for flooring of timber, timber products and wood based panel products |
| BS CECC 41302-1979 |
电子元器件用质量评估协调体系规范.空白详细规范:小功率单圈旋转电位器(M级评估) |
Specification for harmonized system of quality assessment for electronic components - Blank detail specification: low power single turn rotary potentiometers (assessment level M) |
| BS EN 3820-2006 |
|
Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C |
| BS EN 1088 1995+A1-1996 |
|
Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| BS EN 14543 2005+A1-2005 |
|
Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use |
| BS 6904-1987 |
额定电压等于或高于72.5kV的气体绝缘金属封闭式开关装置用电缆连接件指南 |
Guide for cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above |
| BS 7410-1991 |
工业筛选用术语词汇 |
Glossary of terms used in industrial screening |
| DD 195-1-1991 |
水力连接器.第1部分:流体动力系统用连接器端口螺纹及其密封件的试验方法 |
Hydraulic couplings. Method of test for coupling port threads and their seals intended for use in fluid power systems |
| BS EN 10036-1991 |
黑色金属材料的化学分析.钢铁中碳总含量的测定.在氧气流中燃烧后的重力测定法 |
Chemical analysis of ferrous materials - Determination of total carbon in steels and irons - Gravimetric method after combustion in a stream of oxygen |
| BS EN 10071-1991 |
黑色金属材料的化学分析.钢铁中锰含量的测定.电势滴定法 |
Chemical analysis of ferrous materials - Determination of manganese in steels and irons - Electrometric titration method |
| BS EN 10136-1991 |
黑色金属材料的化学分析.钢铁中镍含量的测定.火焰原子吸收光谱测定法 |
Chemical analysis of ferrous materials - Determination of nickel in steels and irons - Flame atomic absorption spectrometric method |
| BS 9075 N023-1978 |
固定式单片陶瓷介质电容器(1B型)详细规范.单面中心引线矩形非金属壳.全面评定级 |
Detail specification for fixed monolithic ceramic dielectric capacitors (type 1B) - Rectangular non-metallic case, centred wires on one face - Full assessment level |
| BS CECC 90105-1987 |
电子元器件用质量评估协调体系规范.空白详细规范:熔丝连接可编程只读存贮器、单晶硅集成电路 |
Specification for harmonized system of quality assessment for electronic components - Blank detail specification: fusible link programmable bipolar read only memories, silicon monolithic integrated circuits |
| BS EN 196-7-1992 |
水泥的试验方法.试样的取样和制备方法 |
Methods of testing cement - Methods of taking and preparing samples of cement |
| BS EN 60925-1991 |
管形荧光灯的直流供的电子镇流器性能要求规范 |
Specification for performance requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps |
| BS EN 28662-1-1993 |
手持便携电动工具.手柄振动测量.总则 |
Hand-held portable power tools - Measurement of vibrations at the handle - General |
| BS 7567-3-1992 |
地理信息电子传输(NTF).第3部分:采用BS 6690标准执行地理信息电子传输实施规范 |
Electronic transfer of geographic information (NTF) - Specification for implementing NTF using BS 6690 |
| BS 7579-1992 |
工业筛用金属丝网布、多孔板和电铸板的筛孔标记和标称尺寸规范 |
Specification for designation and nominal sizes of openings for woven wire cloth, perforated plate and electroformed sheet for industrial screens |
| BS EN 28233-1992 |
热塑性塑料阀门的扭矩试验方法 |
Thermoplastics valves - Torque - Test method |
| PD 6503-1-1990 |
燃烧产物的毒性.第1部分:总则 |
Toxicity of combustion products. General |
| BS 8000-1-1989 |
建筑工地操作工艺.第1部分:挖掘和填塞实用规程 |
Workmanship on building sites - Code of practice for excavation and filling |
| BS EN 10002-5-1992 |
金属材料拉伸试验.第5部分:高温试验方法 |
Tensile testing of metallic materials - Method of test at elevated temperatures |
| BS EN 60068-3-3-1991 |
环境试验.指南.第3部分.其它.第3节.:设备抗震试验方法指南 |
Environmental testing - Guidance - Environmental testing - Miscellaneous - Guide to seismic test methods for equipment |
| BS 7378-2-1991 |
使用2号数字存取信号传输系统(DASS 2)经2048千位/秒CCITT推荐标准G·03接口连接公共电信系统的装置.第2部分 |
Apparatus for connection to public telecommunications systems using the Digital Access Signalling System No. 2 (DASS 2) via a 2048 kbit/s CCITT Recommendation G.703 interface - Specification for automatic-repeat call attempt facilities |
| BS 7334-1-1990 |
建筑施工用测量仪器.第1部分:使用精度的测定方法:原理 |
Measuring instruments for building construction - Methods for determining accuracy in use: theory |
| BS 7334-2-1990 |
建筑施工用测量仪器.第2部分:使用精度的测定方法:卷尺 |
Measuring instruments for building construction - Methods for determining accuracy in use: measuring tapes |
| BS 7334-3-1990 |
建筑施工用测量仪器.第3部分:使用精度的测定方法:光学水准仪 |
Measuring instruments for building construction - Methods for determining accuracy in use: optical levelling instruments |
| BS 7407-1991 |
直接用燃料能源驱动的儿童运送车辆规范 |
Specification for vehicles, directly propelled by energy derived from a fuel, capable of carrying children |
| BS ISO/IEC TR 9578-1991 |
信息技术.局域网络用通信接口连接器 |
Information technology - Communication interface connectors used in local area networks |
| BS EN 196-6-1992 |
水泥的试验方法.细度的测定 |
Methods of testing cement - Determination of fineness |
| DD ENV 22605-2-1992 |
压力用钢制品.温升特性的导出和证明.第2部分:奥氏体钢制品的试验应力 |
Steel products for pressure purposes. Derivation and verification of elevated temperature properties. Proof stress of austenitic steel products |
| DD ENV 22605-3-1992 |
压力用钢制品.温升特性的导出和证明.第3部分:当数据给定时导出温升屈服或试验应力特性的选择程序 |
Steel products for pressure purposes. Derivation and verification of elevated temperature properties. An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited |
| BS 7148-1990 |
程序设计用PL/1语言标准化备忘录 |
Memorandum on the standardization of the programming language PL/1 |
| DD 195-2-1991 |
水力连接器.第2部分:流体动力系统用连接器试验方法 |
Hydraulic couplings. Method of test for couplings intended for use in fluid power systems |
| BS EN 2284-1991 |
铝合金和锻铝合金硫酸阳极化规范 |
Specification for sulfuric acid anodizing of aluminium and wrought aluminium alloys |
| BS DD ISO/TS 11073-92001-2007 |
|
Health informatics - Medical waveform format - Encoding rules |
| DD CEN/TS 15442-2006 |
|
Solid recovered fuels — Methods for sampling |
| BS EN 123200-1989 |
电子元器件质量评定统一体系.分规范:具有镀通孔的单面和双面印制电路板 |
Harmonized system of quality assessment for electronic components: Sectional specification: Single and double sided printed boards with plated through holes |
| BS AU 217-2-1989 |
机动车辆用最大公路行驶限速器.第2部分:系统和部件要求规范 |
Maximum road speed limiters for motor vehicles - Specification for system and component requirements |
| BS 7287-1990 |
耐火液压油使用指南 |
Guide for the use of fire-resistant hydraulic fluids |
| PD 2754-2-1993 |
有关预防电击的电子电工设备的分类.第2部分:预防电击的要求指南 |
Classification of electrical and electronic equipment with regard to protection against electric shock. Guide to requirements for protection against electric shock |
| DD ENV 41513-1993 |
信息系统互连.虚拟终端.基础级.1型虚拟字体分配 |
Information systems interconnection. Virtual terminal. Basic class. VT Font assignment type 1 |
| BS EN 61104-1993 |
小型视盘录像系统.12cm CD-V |
Compact disc video system - 12 cm CD-V |
| BS 7591-1-1992 |
材料的孔隙度和孔隙尺寸分布.第1部分:水银孔隙度测定法的评估方法 |
Porosity and pore size distribution of materials - Method of evaluation by mercury porosimetry |
| BS 7079-B2-1992 |
涂料和有关产品使用前钢基片的制备.第B2部分:表面清洁度的评定方法.在清洁的表面上氯化物的测定方法 |
Preparation of steel substrates before application of paints and related products. Methods for the assessment of surface cleanliness. Method for determination of chlorides on cleaned surfaces |
| BS 8216-1991 |
建筑物用隔热和吸声喷涂轻质矿物涂层实用规程 |
Code of practice for use of sprayed lightweight mineral coatings used for thermal insulation and sound absorption in buildings |
| BS 6783-11-1990 |
镍、镍铁和镍合金的取样与分析.第11部分:镍合金钴含量的测定方法(六氰基高铁酸钠电位滴定法) |
Sampling and analysis of nickel, ferronickel and nickel alloys. Method for the determination of cobalt in nickel alloys (potentiometric titration method using potassium hexacyanoferrate (III)) |
| BS ISO 9838-1993 |
高山雪撬紧固绷带.雪橇紧固绷带试验用试验底板 |
Alpine ski-bindings - Test soles for ski-binding tests |
| BS ISO 10045-1993 |
高山雪橇.紧固绷带安装部位.试验螺钉要求 |
Alpine skis - Binding mounting area - Requirements for test screws |
| BS 7403-5-1991 |
内燃机用全流式润滑油过滤器.第5部分:冷起动摸拟和液压脉冲耐久性的试验方法 |
Full-flow lubricating oil filters for internal combustion engines - Method of test for cold start simulation and hydraulic pulse durability |
| BS EN 60465-1992 |
电缆用带油导管的未使用过的绝缘矿物油规范 |
Specification for unused insulating mineral oils for cables with oil ducts |
| PD 6689-2006 |
|
Surface dressing – Guidance on the use of BS EN 12271 |
| BS 1580 Pts.1 & 2-1962 |
统一螺纹规范.第1和第2部分:直径等于与大于 1/4英寸 |
Specification for Unified screw threads. Diameters in and larger |
| BS 3410-1961 |
一般工程用金属垫圈规范 |
Specification for metal washers for general engineering purposes |
| BS 6221-24-1992 |
印制线路板.第24部分:照相原图制作指南 |
Printed wiring boards - Guide for the production of artwork |
| BS 8118 Pt.2-1992 |
铝的结构应用.第2部分;材料、工艺和防护规范 |
Structural use of aluminium. Specification for materials, workmanship and protection |
| BS 7379-1991 |
塑料/金属叠层可涨缩软管规范 |
Specification for plastics/metal laminate collapsible tubes |
| BS 7398-1991 |
手动弓形锯结构规范 |
Specification for hand hacksaw frames |
| BS 6049-5-1989 |
茶叶试验方法.第5部分:水可溶和不溶灰分含量测定 |
Methods of test for tea - Determination of water-soluble ash and water-insoluble ash |
| BS AU 194-1984 |
牵引车和挂车之间电气连接件性能规范 |
Specification for performance of electrical connections between towing vehicles and trailers |
| BS 5938-1-1984 |
电信用感应器及变压器铁芯.第1部分:测量方法 |
Cores for inductors and transformers for telecommunications - Methods of measurement |
| BS 185-17-1973 |
航空和航天术语词汇.第17节:航空航天医学 |
Glossary of aeronautical and astronautical terms - Aerospace medicine |
| BS 6318-1-1982 |
斗式升降机.第1部分:分类 |
Bucket elevators - Classification of bucket elevators |
| BS 6318-2-1982 |
斗式升降机.第2部分:标定圆钢连接链垂直斗式升降机尺寸规范 |
Bucket elevators - Specification for dimensions of vertical bucket elevators with calibrated round steel link chains |
| BS 9300 C841-849-1971 |
硅稳压器二极管详细规范 |
Detail specification for silicon voltage regulator diodes |
| BS 9301 N002-1971 |
通用硅信号二极管详细规范.150mA、150V、密封、玻璃封装.一般应用范围Q |
Detail specification for general purpose silicon signal diodes - 150 mA, 150 V, hermetically sealed, glass encapsulation - General application category Q |
| BS 3231-1960 |
空气温度范围为0-140°F(-20-60℃)用温度记录器(双金属型)规范 |
Specification for thermographs (bimetallic type) for air temperatures within the range 0 °F to 140 °F (-20 °C to 60 °C) |
| BS 9300 C476-1973 |
硅雪崩整流器二极管详细规范 |
Detail specification for silicon avalanche rectifier diode |
| BS 5367-1976 |
涂层磨料的尺寸 |
Dimensions of coated abrasives |
| BS 9612 N019-1979 |
振荡器用冷焊密封石英晶体振子详细规范.DN、D2、DQ和DP外壳、17至75MHz频率范围.窄温范围(非温控)操作的第 |
Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 17 to 75 MHz frequency range - Third overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temp |
| BS 9305 N044-1974 |
硅稳压器二极管详细规范.1.0W、3.3-33V(5%)、密封.全面评定级 |
Detail specification for silicon voltage regulator diodes - 1.0 W , 3.3 to 33 V (5%), hermetically sealed - Full assessment level |
| BS 4193-2-1986 |
镶硬质合金刀具.第2部分:无固定孔的圆角可转位硬质合金(碳化物)刀片尺寸规范 |
Hardmetal insert tooling - Specification for dimensions for indexable hardmetal (carbide) inserts with rounded corners, without fixing hole |
| BS 5667-3-1979 |
连续式机械装卸设备规范.安全性要求.第3部分:松散物料:气动装卸装置给料的贮存设备 |
Specification for continuous mechanical handling equipment - safety requirements - Loose bulk materials: storage equipment fed by a pneumatic handling system |
| BS 5667-4-1979 |
连续式机械装卸设备规范.安全性要求.第4部分:松散物料:气动装卸用起重臂下移动式吸管 |
Specification for continuous mechanical handling equipment - safety requirements - Loose bulk materials: mobile suction pipes suspended from derrick jibs used in pneumatic handling |
| BS 5667-5-1979 |
连续式机械装卸设备规范.安全性要求.第5部分:松散物料:气动装卸用连接器与软管件 |
Specification for continuous mechanical handling equipment - safety requirements - Loose bulk materials: couplings and hose components used in pneumatic handling |
| BS 5667-6-1979 |
连续式机械装卸设备规范.安全性要求.第6部分:松散物料:气动装卸用旋转给料机 |
Specification for continuous mechanical handling equipment - safety requirements - Loose bulk materials: rotary feeders used in pneumatic handling |
| BS 4871-3-1985 |
按认可焊接工艺操作的焊工鉴定考试规范.第3部分:金属管与管板接头间电弧焊 |
Specification for approval testing of welders working to approved welding procedures - Arc welding of tube to tube-plate joints in metallic materials |
| BS 3900-B9-1986 |
涂料试验方法.第B9集:液体涂料与干涂料膜化学检验.第9部分:可溶性镉含量测定 |
Methods of test for paints - Tests involving chemical examination of liquid paints and dried paint films - Determination of 'soluble' cadmium content |
| BS 3274-1960 |
通用管式热交换器规范 |
Specification for tubular heat exchangers for general purposes |
| BS 4833-1986 |
周围间试验和工作使用的湿度一览表 |
Schedule for hygrometric tables for use in the testing and operation of environmental enclosures |
| BS 4994-1987 |
增强的塑料容器及桶的设计和结构规范 |
Specification for design and construction of vessels and tanks in reinforced plastics |
| BS 4267-1-1988 |
硝酸铵.第1部分:氨型氮含量测定方法 |
Ammonium nitrate - Method for determination of ammoniacal nitrogen content |
| PD CEN/TR 15545-2006 |
|
Guide to the use of EN 545 |
| BS 4193-17-1989 |
镶硬质合金刀具.第17部分:可转位刀片用膛孔型铣刀命名规范 |
Hardmetal insert tooling - Specification for designation of bore type milling cutters for indexable inserts |
| BS 6988-1989 |
用于盘碟包装材料的热压带粘合力的测定方法 |
Method for determination of the adhesion of autoclave tape to tray wrap material |
| BS 5688-28-1986 |
工业用硼酸、氧化硼、四硼酸二钠、高硼酸钠与粗硼酸钠的试验方法.粗硼酸钠中钙与镁总含量和可溶于碱的钙与 |
Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use - Determination of total and alkali-soluble calcium and magnesium contents of crude sodi |
| BS 4140-1-1986 |
氧化铝试验方法.第1部分:试样制备和贮存 |
Methods of test for aluminium oxide - Preparation and storage of test samples |
| BS 5618-1985 |
填充脲甲醛(UF)泡沫塑料的空心墙(具有砖砌或混凝土内外层)保温实用规程 |
Code of practice for thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with urea-formaldehyde (UF) foam systems |
| BS 9220 N003-1971 |
扁矩形(8.33:1)刚性波导管详细规范.标准壁厚.一般应用范围 |
Detail specification for flat rectangular (8.33:1) rigid waveguide tubing - Standard wall thickness - General application category |
| BS 5617-1985 |
适用于砖砌或混凝土内外层空心墙保温的脲甲醛(UF)泡沫塑料规范 |
Specification for urea-formaldehyde (UF) foam systems suitable for thermal insulation of cavity walls with masonry or concrete inner and outer leaves |
| BS 9364 N008 and N010-1978 |
小功率硅N-P-N型开关晶体管详细规范.20V、平面外延、额定环境条件、密封封装(长引线型).全面附加评定级 |
Detail specification for low power silicon n-p-n switching transistors - 20 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version) - Full plus additional assessment level |
| BS 903-A27-1986 |
橡胶的物理试验.第A27部分:橡胶对织物附着力的测定(直接拉力法) |
Physical testing of rubber - Determination of rubber to fabric adhesion - Direct tension method |
| BS 1660-6-1988 |
机用圆锥.第6部分:莫氏锥柄刀具用7/24外锥度的适配器规范 |
Machine tapers - Specification for adaptors with external 7/24 tapers for tools with Morse taper shanks |
| BS 1660-7-1988 |
机用圆锥.第7部分:莫氏锥柄刀具用7/24外锥度的加长适配器规范 |
Machine tapers - Specification for extension adaptors with external 7/24 tapers for tools with Morse taper shanks |
| BS 5766-7-1988 |
动物饲料分析方法..第7部分:黄曲霉毒素B1测定 |
Methods for analysis of animal feeding stuffs - Determination of aflatoxin B1 |
| BS 1765-1-1990 |
医院床头柜规范.第1部分:医院用一般用途床头柜 |
Hospital bedside lockers - Specification for general purpose bedside lockers for patients |
| BS ISO 2110-1991 |
信息技术.数据通信.25极数据终端设备/数据通信设备(DTE/DCE)接口连接器和触点号码分配 |
Information technology - Data communication - 25-pole DTE/DCE interface connector and contact number assignments |
| BS 3407-1982 |
焦炭筛选设备的评定指南 |
Guide for assessing coke screening plant |
| BS AU 245-1992 |
3.5吨以上的商用车辆和公共汽车前牵引附件规范 |
Specification for front towing attachments for commercial road vehicles and buses over 3.5 t |
| BS 4203-2-1980 |
挤塑硬聚氯乙烯瓦楞板.第2部分:外形和尺寸规范 |
Extruded rigid PVC corrugated sheeting - Specification for profiles and dimensions |
| BS 6525-1984 |
液压流体动力系统用储液器的设计与建造规范 |
Specification for design and construction of reservoirs used in hydraulic fluid power systems |
| BS 4847-1989 |
声录放设备速度波动的测量方法 |
Method of measurement of speed fluctuations in sound recording and reproducing equipment |
| BS 1103-1989 |
橡胶软管加强用纺织物的规范 |
Specification for fabrics for the reinforcement of rubber hoses |
| BS 5377-2-1990 |
用棉制对比布评定洗涤效果.第2部分:洁净棉制对比布试验与分析方法 |
Assessment of laundering effects by means of a cotton control cloth - Methods of analysis and test for the unsoiled cotton control cloth |
| BS 7251-1-1990 |
矫形外科关节假体.第1部分:一般要求规范 |
Orthopaedic joint prostheses - Specification for general requirements |
| BS 1133-15-1991 |
包装规程.第15节:伸缩性捆绑带 |
Packaging code - Tensional strapping |
| BS EN 2143-1993 |
1050A型铝制通用头型实心铆钉.英制系列 |
Rivets, solid, universal head, in aluminium 1050A, inch based series |
| BS EN 2148-1993 |
5056A型铝制通用头型实心铆钉.英制系列 |
Rivets, solid, universal head, in aluminium alloy 5056A, inch based series |
| BS EN 2791-1991 |
啮合量为1.5螺纹直径的单叉螺纹柄可调节的连杆端头.尺寸和负荷 |
Rod ends, adjustable, single fork and threaded shank with engagement: 1.5 thread diameter - Dimensions and loads |
| BS 5293-20-1992 |
橡胶工业用炭黑取样和试验方法.第20部分:丁苯橡胶评定方法 |
Sampling and testing carbon black for use in the rubber industry - Method for evaluation in styrene-butadiene rubbers |
| BS 4727-3 Group 09-1991 |
电工、电力、电信、电子学、照明和颜色术语.第3部分:电信和电子学专用术语:第09集:传输线和波导 |
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms - Terms particular to telecommunications and electronics - Transmission lines and waveguides |
| BS 3680-4I-1986 |
明渠流量测量.第4部分:溢流堰和斜槽.第4I节:V形宽顶堰 |
Methods of measurement of liquid flow in open channels - Weirs and flumes - V-shaped broad crested weirs |
| BS CECC 75201-1992 |
电子元器件质量评定协调体系规范.空白详细规范.临时范例.详细规范/空白详细规范.频率小于3MHz的环形连接器 |
Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Interim example - Detail specification/blank detail specification - Circular connectors for frequencies below 3 MHz |
| BS 2782-1 Methods 134A and 134B-1992 |
塑料试验方法.第1部分:热性能.方法134A:热塑塑料氧化感应时间测定 |
Methods of testing plastics - Thermal properties - Determination of the oxidation induction time of thermoplastics |
| BS EN 22248-1986 |
整包运输包装件.耐垂直跌落碰撞的性能测定方法 |
Complete, filled transport packages - Method for determination of resistance to vertical impact by dropping |
| BS 1083-1965 |
精密六角螺拴、螺钉与螺母(B.S.W和B.S.F 螺纹)规范 |
Specification for precision hexagon bolts, screws and nuts (B.S.W. & B.S.F. threads) |
| BS 1245-1975 |
金属(钢)门框规范 |
Specification for metal door frames (steel) |
| BS 8210-1986 |
建筑物的维护管理指南 |
Guide to building maintenance management |
| BS 3821-2-1974 |
硬质合金模具和配套硬质合金工具规范.第2部分:拉制圆金属丝用烧结模坯和精加工模 |
Specification for hardmetal dies and associated hardmetal tools - As-sintered pellets and finished dies for drawing round wire |
| BS QC 960201-1992 |
电子元器件质量评估协调体系规范.空白详细规范:电子设备用机电式开关.手柄(拨动式)开关用空白详细规范 |
Specification for harmonized system of quality assessment for electronic components - Blank detail specification: electromechanical switches for use in electronic equipment - Blank detail specification for lever (toggle) switches |
| BS 3863-1992 |
燃气轮机采购指南 |
Guide for gas turbines procurement |
| BS 1016-21-1981 |
煤和焦炭的分析与试验方法.第21部分:无烟煤的最大含水量的测定 |
Methods for analysis and testing of coal and coke - Determination of moisture-holding capacity of hard coal |
| BS 3142-3-1970 |
家用经加工固体无烟燃料规范.第3部分:各种家用敞炉专用活性燃料 |
Specification for manufactured solid smokeless fuels for household use - Specially reactive fuels for all types of domestic open fire |
| BS 2626-1992 |
制冷压缩机用润滑油规范 |
Specification for lubricants for refrigerant compressors |
| BS 1153-1992 |
银质明胶型缩微胶片的冲洗和贮存的推荐标准 |
Recommendations for processing and storage of silver-gelatine-type microfilm |
| BS EN 2000-1992 |
质量保证.EN航空航天产品.制造商质量体系的认可 |
Quality assurance - EN aerospace products - Approval of the quality system of manufacturers |
| BS 2782-5 Method 521A-1992 |
塑料的试验方法.第5部分:风化条件下光学性能和颜色性能.方法521A:塑料薄膜和薄板霾度的测定 |
Methods of testing plastics - Optical and colour properties, weathering - Determination of haze of film and sheet |
| BS 6728-2-1993 |
热塑性塑料热水瓶.第2部分:聚烯烃材料制热水瓶规范 |
Thermoplastics hot water bottles - Specification for hot water bottles manufactured from polyolefin materials |
| BS 5598-11-1983 |
卤代烃取样和试验方法.第11部分:氯氟代烃惰性气体含量测定:气相色谱法:总则 |
Methods of sampling and test for halogenated hydrocarbons - Determination of 'inert' gas content of chlorofluorohydrocarbons, gas chromatographic method, general principles |
| BS 4884-3-1993 |
技术手册.第3部分:表述导则 |
Technical manuals - Guide to presentation |
| BS 2782-1 Methods 131C and 131D-1978 |
塑料的试验方法.热性能.热固模制材料加热后的抗碎强度(耐热性).热固层叠板材或模制材料加热后的抗碎强度 ( |
Methods of testing plastics - Thermal properties - Crushing strength after heating (heat resistance) of thermosetting moulding material - Crushing strength after heating (heat resistance) of thermosetting laminated sheet or mouldings |
| BS 6478-1984 |
图书馆与文献管理的文献目录信息归档指南 |
Guide to filing bibliographic information in libraries and documentation |
| BS 506-1-1987 |
工业用甲醇.第1部分:甲醇规范 |
Methanol for industrial use - Specification for methanol |
| BS 5740-1989 |
液体产品用椭圆形平顶罐规范 |
Specification for oblong flat-top cans for liquid products |
| BS 7023-3-1988 |
使用改进的频率调制以7958ftprad、3.8tpmm(96tpi)速度双面录制的数据交换用130mm(5.25in)软磁盘盒的制造和 |
Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 3.8 tpmm (96 tpi) on both sides - Track format B |
| BS 6461-1-1984 |
烧固体燃料(含木柴和泥煤)的家用灶具的烟囱和烟道的安装.第1部分:砖砌烟囱和烟管实用规程 |
Installation of chimneys and flues for domestic appliances burning solid fuel (including wood and peat) - Code of practice for masonry chimneys and flue pipes |
| BS 6376-2-1984 |
化学分析试剂.第2部分:规范(第1系列) |
Reagents for chemical analysis - Specifications (first series) |
| BS QC 160000-1-1987 |
电子元器件质量评定协调体系.第1部分:继电器.总规范：机电有或无继电.试验和测量规范 |
Harmonized system of quality assessment for electronic components - Electrical relays - Generic specification: electromechanical all-or-nothing relays - Test and measurement procedures |
| BS 7024-2-1988 |
使用改进的频率调制以7958ftprad、1.9tpmm(48tpi)速度双面录制的数据交换用130mm(5.25in)软磁盘盒的制造和 |
Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 1.9 tpmm (48 tpi) on both sides - Track format A |
| BS 7024-3-1988 |
使用改进的频率调制以7958ftprad、1.9tpmm(48tpi)速度双面录制的数据交换用130mm(5.25in)软磁盘盒的制造和 |
Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 1.9 tpmm (48 tpi) on both sides - Track format B |
| BS CECC 31400-1982 |
电子元件质量评定协调体系.分规范.防电击一级固定陶瓷介质电容器 |
Harmonized system of quality assessment for electronic components: sectional specification: fixed ceramic capacitors of dielectric class 1, for electrical shock hazard protection |
| 2M 45 Pt.1-1986 |
飞机轮胎和轮辋.第1部分:新轮胎、翻新轮胎和轮辋规范 |
Aircraft tyres and rims. Specification for new tyres, retreads and rims |
| BS 6403-1983 |
联接于英国电信电传网络的单频道音频信号用简易电传终端规范 |
Specification for simple telex terminals using single channel voice frequency signalling for connection to British Telecommunications telex network |
| BS CECC 00009-1982 |
电子元器件质量评定协调体系.基本规范:机电部件的基本试验程序和测量方法 |
Harmonized system of quality assessment for electronic components - Basic specification: basic testing procedures and measuring methods for electromechanical components |
| BS 6783-7-1986 |
镍、镍铁和镍合金的取样与分析.第7部分:感应电炉燃烧后用红外测定镍镍铁和镍合金中硫的方法 |
Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of sulphur in nickel, ferronickel and nickel alloys by infra-red absorption after induction furnace combustion |
| BS 7320-1990 |
缝衣长针集装箱规范 |
Specification for sharps containers |
| BS 6305-1992 |
由某些共用电信话务员经管的公用转换电话网络连接设备的一般要求规范 |
Specification for general requirements for apparatus for connection to public switched telephone networks run by certain public telecommunication operators |
| BS 7034-7-1988 |
玻璃粘度和测定粘度固定点.第7部分:采用射束弯曲法对退火点和应力点的测定方法 |
Viscosity and viscometric fixed points of glass - Method for the determination of annealing point and strain point by beam bending |
| BS E9372-1976 |
电子元器件用质量评估协调体系规范.空白详细规范.低频与高频放大用额定周围环境的双极晶体管 |
Specification for harmonized system of quality assessment for electronic components - Blank detail specification: ambient-rated bipolar transistors for low and high frequency amplification |
| BS 9300 C776-777-1971 |
锗同轴混频器二极管详细规范 |
Detail specification for germanium coaxial mixer diodes |
| BS 9300 C778-1971 |
锗同轴混频器二极管配对用详细规范 |
Detail specification for a matched pair of germanium coaxial mixer diodes |
| BS AU 228-2-1989 |
道路车辆碰撞试验.第2部分:使用光学仪器的测量技术规范 |
Impact tests on road vehicles - Specification for measurement techniques using optical instrumentation |
| BS 9612 N017-1979 |
振荡器用冷焊密封石英晶体振子详细规范.DN、D2、DQ和DP外壳、0.8至20MHz和3.0到30MHz频率范围.窄温范围(非 |
Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode, AT-cut, for operation over narrow tempera |
| BS 1892-2.6-1986 |
体育器械.第2部分:特殊要求.第6节:拳击台规范 |
Gymnasium equipment - Particular requirements - Specification for boxing rings |
| BS CECC 40101 019-1977 |
固定小功率非绕线绝缘电阻器详细规范.螺旋形切割金属氧化物薄膜.全面评定级 |
Detail specification for fixed low power non-wirewound insulated resistors - Metal oxide film, helically cut - Full assessment level |
| BS 4727-5 Group 01-1985 |
电工、电力、电信、电子学、照明和颜色术语.第5部分:医疗电气设备专用术语.第01集:辐射学和辐射物理学术语 |
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms - Terms particular to electromedical equipment - Radiology and radiological physics terminology |
| BS 6965-1-1988 |
硬纸板的折缝性能.折叠90°的折缝恢复(回弹)测定方法 |
Creasing properties of carton board - Method for determination of crease recovery (spring back) of 90 ° fold |
| BS 6898-1987 |
实验室通用玻璃离心试管规范 |
Specification for glass centrifuge tubes for general laboratory use |
| BS 1297-1987 |
企口接合的软木地板规范 |
Specification for tongued and grooved softwood flooring |
| BS 1881-125-1986 |
混凝土试验.第125部分:实验室新浇混凝土的搅拌和取样方法 |
Testing concrete - Methods for mixing and sampling fresh concrete in the laboratory |
| BS 3316-3-1987 |
焚烧炉.第3部分:医院废物焚烧装置买方要求的规范方法 |
Incinerators. Method for specifying purchasers' requirements for incineration plant for the destruction of hospital waste |
| BS 6916-5-1988 |
链锯.第5部分:链条制动性能的评估方法 |
Chain saws - Methods of evaluating chain brake performance |
| BS 1881-206-1986 |
混凝土试验.第206部分:混凝土应力测定的推荐方法 |
Testing concrete - Recommendations for determination of strain in concrete |
| BS 4051-1987 |
铺地纺织物厚度的测定方法 |
Method for determination of thickness of textile floor coverings |
| BS 1727-1987 |
电瓶驱动的车辆用电机规范 |
Specification for motors for battery operated vehicles |
| BS 3316-2-1987 |
焚烧炉.第2部分:医院废物焚烧装置性能试验和计算方法 |
Incinerators. Methods of test and calculation for the performance of incineration plant for the destruction of hospital waste |
| BS 6916-9-1988 |
链锯.第9部分:手柄的强度规范 |
Chain saws - Specification for strength of handles |
| BS 3564-1986 |
白云母块、薄片及薄膜规格分级方法 |
Method for size-grading of muscovite mica blocks, thins and films |
| BS 6954-2-1988 |
建筑用公差.第2部分:具有正态尺寸分布部件之间预配合的统计基础推荐标准 |
Tolerances for building - Recommendations for statistical basis for predicting fit between components having a normal distribution of sizes |
| BS 5237-1985 |
起重旋锁规范 |
Specification for lifting twistlocks |
| BS 770-9-1985 |
奶酪的化学分析法.第9部分:硝酸盐和亚硝酸盐含量的测定(镉还原法和光度法) |
Methods for chemical analysis of cheese - Determination of nitrate and nitrite contents - Cadmium reduction and photometry method |
| BS 88-6-1988 |
电压达交流1000V(含)和直流1500V(含)的管状熔断器.第6部分:交流 240/415V工业和商业电气设备用的小尺寸熔断 |
Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification of supplementary requirements for fuses of compact dimensions for use in 240/415 V a.c. industrial and commercial electrical installations |
| BS 6674-1985 |
一次性使用的微量吸移管规范 |
Specification for disposable micropipettes |
| BS 6083-9-1986 |
助听器.第9部分:带骨传导振动器输出的助听器特性测量方法 |
Hearing aids - Methods for measurement of characteristics of hearing aids with bone vibrator output |
| BS 4656-28-1988 |
机床精度及试验方法.第28部分:车削直径小于1500mm(含)的数控车床规范 |
Accuracy of machine tools and methods of test - Specification for numerically controlled turning machines up to and including 1500 mm turning diameter |
| BS 4448-1988 |
学生用练习簿及纸张规范 |
Specification for school exercise books and papers |
| BS 6663-1986 |
变形尼龙线卷曲强度的测定方法 |
Methods for determination of crimp rigidity of textured nylon yarns |
| BS 6166-2-1986 |
升降装置.第2部分:标记规范 |
Lifting slings - Specification for marking |
| BS 3567-1985 |
选煤厂设计流程图绘制惯例规程 |
Code of practice for preparation of flowsheets for the design of coal preparation plant |
| BS MA 2-8-1985 |
磁罗盘及罗盘座规范.第8部分:A级磁罗盘的传送系统和偏航报警器规范 |
Magnetic compasses and binnacles - Specification for transmitting systems and off-course alarms for class A magnetic compasses |
| BS 4140-4-1986 |
氧化铝试验方法.第4部分:试样溶液加碱熔化制备 |
Methods of test for aluminium oxide - Preparation of sample solution by alkaline fusion |
| BS 4140-8-1986 |
氧化铝的试验方法.用比重瓶计测定绝对密度 |
Methods of test for aluminium oxide - Determination of absolute density using a pyknometer |
| BS 9612 N005-1977 |
振荡器用冷焊密封石英晶体振子详细规范.DN、DQ和DP外壳、0.8至20MHz和3.0到30MHz频率范围.窄温范围(非温控) |
Detail specification for cold welded seal quartz crystal units for oscillator applications - DN, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode , AT-cut, for operation over narrow temperature rang |
| BS 4148-1985 |
出版物题名及标题字缩写规范 |
Specification for abbreviation of title words and titles of publications |
| BS 3487-4-1988 |
气管.第4部分:科尔型导气管规范 |
Tracheal tubes - Specification for tubes of the Cole type |
| BS 4886-1988 |
医院用床架规范 |
Specification for hospital bedsteads |
| BS 4742-3-1985 |
农用机械液压设备.第3部分:挂车用单动倾卸伸缩筒尺寸和额定压力规范 |
Hydraulic equipment for agricultural machinery - Specification for dimensions and pressure rating of single-acting telescopic tipping cylinders for trailers |
| BS 4742-4-1985 |
农用机械液压设备.第4部分:挂车和机具用制动系统用液压管接头规范 |
Hydraulic equipment for agricultural machinery - Specification for hydraulic couplings on braking systems for trailers and trailed equipment |
| BS 791-1990 |
固体枢轴式量热用温度计规范 |
Specification for solid-stem calorimeter thermometers |
| BS 3095-2-1988 |
牛奶冻结点下降值测定方法.第2部分:放牧牛奶冻结点下降推荐规范 |
Methods for determination of the freezing-point depression of milk - Recommendations for the interpretation of the freezing-point depression of herd milk |
| BS 4370-1-1988 |
硬质多孔材料的试验方法.方法1-5 |
Methods of test for rigid cellular materials - Methods 1 to 5 |
| BS 4140-12-1986 |
氧化铝试验方法.第12部分:钒含量测定 |
Methods of test for aluminium oxide - Determination of vanadium content |
| BS 6122-1988 |
工业用低压开关设备和控制装置规范.C型交流双引线感应式近距离开关 |
Specification for low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - Form C, for alternating current, 2 terminals |
| BS 6827-1987 |
袋装绿色咖啡的储存及运输指南 |
Guide to storage and transport of green coffee in bags |
| BS AU 1c-1989 |
半挂车第五轮大号销钉"50"尺寸规范 |
Specification for dimensions of '50' fifth wheel king pin for semi-trailers |
| BS 4140-24-1987 |
氧化铝试验方法.第24部分:粒度分布测定(电铸筛分法) |
Methods of test for aluminium oxide - Determination of fine particle size distribution (method using electroformed sieves) |
| BS 5221-1987 |
米制模数齿轮滚刀通用规范 |
Specification for general purpose, metric module gear hobs |
| BS 5688-0-1986 |
工业用硼酸、氧化硼、四硼酸二钠、高硼酸钠与粗硼酸钠的试验方法.一般介绍 |
Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use - General introduction |
| BS 5688-27-1986 |
工业用硼酸、氧化硼、四硼酸二钠、高硼酸钠与粗硼酸钠的试验方法.粗硼酸钠中二氧化硅总含量和可溶于碱的二 |
Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use - Determination of total and alkali-soluble silica contents of crude sodium borates |
| BS 4140-17-1986 |
氧化铝试验方法.第17部分:氟含量测定 |
Methods of test for aluminium oxide - Determination of fluorine content |
| BS 4140-18-1986 |
氧化铝试验方法.第18部分:磷含量测定 |
Methods of test for aluminium oxide - Determination of phosphorus content |
| BS 4548-1987 |
工业用同步皮带传动规范 |
Specification for synchronous belt drives for industrial applications |
| BS AU 16a-1989 |
电缆连接器(最大连续额定电流17.5A)规范 |
Specification for electrical cable connectors (17.5 A maximum continuous rating) |
| BS 9300 C762-1980 |
X波段用混频器二极管详细规范 |
Detail specification for mixer diodes for use at X-band frequencies |
| BS 3900-B4-1986 |
涂料试验方法.第B4集:液体涂料与干涂料膜化学检验.第4部分:涂料及类似材料中铅总含量测定 |
Methods of test for paints - Tests involving chemical examination of liquid paints and dried paint films - Determination of total lead in paints and similar materials |
| BS 6643-1-1985 |
再装料灭火器(按BS 5423'便携式灭火器规范'制造).第1部分:程序和材料规范 |
Recharging fire extinguishers (manufactured to BS 5423 'Specification for portable fire extinguishers') - Specification for procedure and materials |
| BS 5688-29-1986 |
工业用硼酸、氧化硼、四硼酸二钠、高硼酸钠与粗硼酸钠的试验方法.粗硼酸钠中钙与镁总含量和可溶于碱的钙与 |
Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use - Determination of total and alkali-soluble calcium and magnesium contents of crude sodi |
| BS 3378-1986 |
烧固体矿物燃料的室内加热器规范 |
Specification for roomheaters burning solid mineral fuels |
| BS 2485-1987 |
T形槽、T形螺栓、T形螺母与榫舌规范 |
Specification for tee slots, tee bolts, tee nuts and tenons |
| BS 5817-7-1989 |
视听、视频和电视设备及系统.第7部分:视听设备安全使用和操作指南 |
Specification for audiovisual, video and television equipment and systems - Guide for safe handling and operation of audiovisual equipment |
| BS 4651-1-1988 |
氨溶液.第1部分:20℃时密度测定方法 |
Ammonia solution - Method for determination of density at 20 °C |
| BS 4140-0-1986 |
氧化铝试验方法.总则 |
Methods of test for aluminium oxide - General introduction |
| BS 6753-1986 |
防护装置用(电磁操纵)射钉规范 |
Specification for shotbolts (solenoid operated) for guarding machinery |
| BS 6721-6-1989 |
铜和铜合金的取样与分析.第6部分:用分光光度法对铜和铜合金中磷的测定方法 |
Sampling and analysis of copper and copper alloys - Method for determination of phosphorus in copper and copper alloys by spectrophotometry |
| BS 6721-8-1989 |
铜和铜合金的取样与分析.第8部分:用滴定法对铜合金中镍的测定方法 |
Sampling and analysis of copper and copper alloys - Method for determination of nickel in copper alloys: titrimetric method |
| BS 6721-10-1989 |
铜和铜合金的取样与分析.第10部分:用滴定法对铜合金中铬的测定方法 |
Sampling and analysis of copper and copper alloys - Method for determination of chromium in copper alloys: titrimetric method |
| BS 6721-11-1989 |
铜和铜合金的取样与分析.第11部分:用燃烧滴定法对铜和铜合金中硫的测定方法 |
Sampling and analysis of copper and copper alloys - Method for determination of sulphur in copper and copper alloys: combustion titrimetric method |
| BS 9300 C771-772-1971 |
同轴混频器二极管详细规范 |
Detail specification for coaxial mixer diodes |
| BS 9300 C534-1971 |
硅同轴电阻开关二极管详细规范 |
Detail specification for silicon coaxial resistive switching diode |
| BS 4465-1989 |
客货两用电动提升机的设计和结构规范 |
Specification for design and construction of electric hoists for both passengers and materials |
| BS 9612 N006-1977 |
振荡器用冷焊密封石英晶体振子详细规范.DN、47U/2、DQ和DP外壳、17至75MHz频率范围.宽温范围(非温控)操作的 |
Detail specification for cold welded seal quartz crystal units for oscillator applications - DN, 47 U/2, DQ and DP enclosures, 17 to 75 MHz frequency range - Third overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temp |
| BS 1683-1987 |
已加工乳酪包装用铝箔规范 |
Specification for coated aluminium foil for wrapping processed cheese |
| BS 4508-1-1986 |
绝热地下管道.第1部分:有气隙的外加钢套管系统规范 |
Thermally insulated underground pipelines - Specification for steel cased systems with air gap |
| BS 5693-1978 |
电容器和电阻器终端线的优选直径的推荐标准 |
Recommendations for preferred diameters of wire terminations of capacitors and resistors |
| BS 638-5-1988 |
电弧焊用电源、设备和附件.附件规范 |
Arc welding power sources, equipment and accessories - Specification for accessories |
| BS 3169-1986 |
消防急救用卷轴胶管规范 |
Specification for first aid reel hoses for fire-fighting purposes |
| PD 6516-1987 |
防火和采暖器指南 |
Guide to guarding fires and heating appliances |
| BS 3591-1985 |
工业用甲基醇规范 |
Specification for industrial methylated spirits |
| BS 1133-1986 |
包装法规.第19节:包装中干燥剂的使用 |
Packaging code. Use of desiccants in packaging |
| BS 5685-2-1986 |
电度表.第2部分:单相投币控制预付式按时计价的、2级二部式电费率电度表和2级固定费用收受器 |
Electricity meters - Specification for single-phase coin operated prepayment flat rate and two-part tariff watt-hour meters of Class 2 and fixed charge collectors of Class 2 |
| BS 4140-9-1986 |
氧化铝的试验方法.休止角的测量 |
Methods of test for aluminium oxide - Measurement of the angle of repose |
| BS 4140-10-1986 |
氧化铝的试验方法.未夯实密度的测定 |
Methods of test for aluminium oxide - Determination of untamped density |
| BS 5666-5-1986 |
木材防腐剂与防腐处理后分析方法.第5部分:防腐剂溶液及防腐处理后木材环烷酸锌的测定 |
Methods of analysis of wood preservatives and treated timber - Determination of zinc naphthenate in preservative solutions and treated timber |
| BS 4185-14-1987 |
机床零件.60°中心孔导向杆直径测定方法 |
Machine tool components - Method for determination of the pilot diameter of 60 ° centre holes |
| BS 9300 C599-1971 |
安装于杆上的硅微波开关二极管详细规范 |
Detail specification for silicon microwave switching diode, rod mounted |
| BS 9300 C667-668-1971 |
硅雪崩整流器二极管详细规范 |
Detail specification for silicon avalanche rectifier diodes |
| BS 4267-2-1988 |
硝酸铵.第2部分:氮总含量测定方法 |
Ammonium nitrate - Method for determination of total nitrogen content |
| BS 2633-1987 |
输送流体用铁素体钢管道工程的一级电弧焊规范 |
Specification for Class I arc welding of ferritic steel pipework for carrying fluids |
| BS 3900-B5-1986 |
涂料试验方法.第B5集:液体涂料与干涂料膜化学检验.第5部分:液体涂料或覆层粉萃取物制备 |
Methods of test for paints - Tests involving chemical examination of liquid paints and dried paint films - Preparation of acid extracts from liquid paints or coating powders |
| BS 5041-1-1987 |
消防栓系统设备.第1部分:湿式水嘴接地阀规范 |
Fire hydrant systems equipment - Specification for landing valves for wet risers |
| BS 5041-2-1987 |
消防栓系统设备.第2部分:干式水嘴接地阀规范 |
Fire hydrant systems equipment - Specification for landing valves for dry risers |
| BS 6102-10-1987 |
自行车.第10部分:车叉顶部装配用螺纹规范 |
Cycles - Specification for screw threads used to assemble head fittings on bicycle forks |
| BS 6319-9-1987 |
建筑用合成树脂胶料试验..第9部分:最大放热温度分类和测量方法 |
Testing of resin and polymer/cement compositions for use in construction - Method for measurement and classification of peak exotherm temperature |
| BS 2782-9 Method 940B-1989 |
塑料试验方法. 第9部分:取样和试件制备.试验方法940B:用注塑矩形板制备具有规定回缩率的无定形热塑性试件 |
Methods of testing plastics - Sampling and test specimen preparation - Preparation of test specimens of amorphous thermoplastics with a specified reversion by injection moulding rectangular plates |
| BS CECC 30401 033-1981 |
固定式金属化聚乙烯对苯二酸盐薄膜介质直流电容器详细规范(长寿命).刚性径向矩形非金属绝缘壳体.全面评定级 |
Harmonized detail specification for fixed metallized polyethylene terephthalate film dielectric d.c. capacitors (long-life grade) - Rectangular insulated non-metallic case, rigid radial terminations - Full assessment level |
| BS 5662-1-1987 |
铁矿石取样方法评定.第1部分:评定质量变化的实验方法 |
Evaluation of sampling methods for iron ores - Experimental methods for evaluation of quality variation |
| BS 5662-2-1987 |
铁矿石取样方法评定.第2部分:检查取样精度的实验方法 |
Evaluation of sampling methods for iron ores - Experimental methods for checking the precision of sampling |
| BS 5662-3-1987 |
铁矿石取样方法评定.第3部分:检查取样偏差的实验方法 |
Evaluation of sampling methods for iron ores - Experimental methods for checking the bias of sampling |
| BS 5663-2-1987 |
铁矿石试验方法.第2部分:用筛分法测定粒度分布 |
Methods of testing iron ores - Determination of size distribution by sieving |
| BS 4999-145-1987 |
旋转电机一般要求.第145部分:绕组出线端规范 |
General requirements for rotating electrical machines - Specification for winding terminations |
| BS 5751-1987 |
往复运动的液压密封件壳体尺寸规范 |
Specification for dimensions of housings for hydraulic seals for reciprocating applications |
| BS 4215-2-1987 |
电阻点焊用电极、电极夹和辅助设备.第2部分:电阻点焊用直电极规范 |
Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for straight resistance spot welding electrodes |
| BS 4215-6-1987 |
电阻点焊用电极、电极夹和辅助设备.第6部分:内锥度1:10的电极适配器规范 |
Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for electrode adaptors, female taper 1:10 |
| BS 3900-B15-1987 |
涂料试验方法.第B15集:液体涂料与干涂料膜化学检验.第15部分:液体涂料含铅量快速估算方法 |
Methods of test for paints - Rapid method for estimation of lead in liquid paints |
| BS 1619-2-1988 |
可反复使用的胰岛素注射用皮下注射器.第2部分:每毫升100单位量的胰岛素注射器规范 |
Re-usable hypodermic syringes for insulin injection - Specification for syringes for use with insulin of strength 100 units per millilitre |
| BS 9612 N008-1977 |
振荡器用冷焊密封石英晶体振子详细规范.DN、DQ和DP外壳、50至125MHz频率规范.宽温范围(非温控)操作用第五谐 |
Detail specification for cold welded seal quartz crystal units for oscillator applications - DN, DQ and DP enclosures, 50 to 125 MHz frequency range - Fifth overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature |
| BS 3900-B12-1986 |
涂料试验方法.第B12集:液体涂料与干涂料膜化学检验.第12部分:可溶性汞含量的测定 |
Methods of test for paints - Tests involving chemical examination of liquid paints and dried paint films - Determination of 'soluble' mercury content |
| BS 5350-C1-1986 |
粘合剂试验方法.第C1部分:粘结部位机械试验.粘结部位抗劈裂强度测定 |
Methods of test for adhesives - Adhesively bonded joints: mechanical tests - Determination of cleavage strength of adhesive bonds |
| BS 9220 N001-1971 |
普通矩形(2:1)刚性波导管详细规范.标准壁厚.一般应用范围 |
Detail specification for ordinary rectangular (2:1) rigid waveguide tubing - Standard wall thickness - General application category |
| BS 9220 N002-1971 |
中扁矩形(4:1)刚性波导管详细规范.标准壁厚.一般应用范围 |
Detail specification for medium flat rectangular (4:1) rigid waveguide tubing - Standard wall thickness - General application category |
| BS 799-5-1987 |
燃油设备.第5部分:储油罐规范 |
Oil burning equipment - Specification for oil storage tanks |
| BS 5685-3-1986 |
电度表.第3部分:装有1级机电式最大需量指示器的电度表 |
Electricity meters - Specification for meters having Class 1 electro-mechanical maximum demand indicators |
| BS 5685-4-1986 |
电度表.第4部分:3级无功伏安小时电度表规范 |
Electricity meters - Specification for Class 3 var-hour meters |
| BS 3424-10-1987 |
涂覆织物试验.第10部分:方法12A及12B.表面阻力测定 |
Testing coated fabrics - Methods 12A and 12B Determination of surface drag |
| BS 476-22-1987 |
建筑材料和结构的燃烧试验.第22部分:非承重构件耐火的测定方法 |
Fire tests on building materials and structures - Methods for determination of the fire resistance of non-loadbearing elements of construction |
| BS 476-23-1987 |
建筑材料和结构的燃烧试验.第23部分:部件对结构耐火性作用的测定方法 |
Fire tests on building materials and structures - Methods for determination of the contribution of components to the fire resistance of a structure |
| BS 4140-13-1986 |
氧化铝试验方法.第13部分:试样溶液盐酸加压处理制备方法 |
Methods of test for aluminium oxide - Preparation of sample solution by treatment with hydrochloric acid under pressure |
| BS 4140-16-1986 |
氧化铝试验方法.第16部分:用火焰原子吸收法测定锌含量 |
Methods of test for aluminium oxide - Determination of zinc content by flame atomic absorption |
| BS 4758-1986 |
对工程用镍电镀层进行规范的方法 |
Method for specifying electroplated coatings of nickel for engineering purposes |
| BS 4267-4-1987 |
硝酸铵.第4部分:硫酸盐灰分测定方法 |
Ammonium nitrate - Method for determination of sulphated ash |
| BS 6191-5-1985 |
邮件处理机械.第5部分:文件输入机术语词汇 |
Mail processing machines. Glossary of terms for document inserting machines |
| BS 3056-1-1985 |
耐火砖尺寸.第1部分:多用途耐火砖规范 |
Sizes of refractory bricks - Specification for multi-purpose bricks |
| BS 1741-8-1988 |
奶与奶油的化学分析方法.第8部分:奶的氯化物含量的测定 |
Methods for chemical analysis of liquid milk and cream - Determination of chloride content of liquid milk |
| BS 6103-1986 |
单孔并装有绝缘套管的心轴操作电子元件装配尺寸规范 |
Specification for dimensions for the mounting of single-hole, bush-mounted spindle operated electronic components |
| BS 6057-3.14-1987 |
橡胶乳.第3部分:试验方法.第14节:合成橡胶乳高速机械稳定性测定 |
Rubber latices - Methods of test - Determination of high-speed mechanical stability of synthetic rubber latices |
| BS 2775-1987 |
普通实验室用橡皮塞和橡皮管规范 |
Specification for rubber stoppers and tubing for general laboratory use |
| BS 4998-1985 |
模塑热塑性塑料吸尘箱(盖除外)规范 |
Specification for moulded thermoplastics dustbins (excluding lids) |
| BS 3900-D9-1986 |
涂料试验方法.第D9集:涂料膜光学试验.第9部分:颜色和色差测定:测量 |
Methods of test for paints - Optical tests on paint films - Determination of colour and colour difference: measurement |
| BS 4742-5-1985 |
农用机械液压设备.第5部分:挂车和机具用制动气缸尺寸规范 |
Hydraulic equipment for agricultural machinery - Specification for dimensions of braking cylinders for trailers and trailed equipment |
| BS 4292-1-1989 |
金与金合金电镀层规定方法.第1部分:工程用金与金合金 |
Method for specifying electroplated coatings of gold and gold alloys - Gold and gold alloys for engineering purposes |
| BS 5817-20-1989 |
视听、视频、电视设备及系统.第20部分:16mm有声影片放映机性能测量和报告方法 |
Specification for audiovisual, video and television equipment and systems - Methods of measuring and reporting the performance of 16 mm sound film projectors |
| BS 2782-5 Method 540C-1988 |
塑料试验方法.第5部分:风化条件下光学和颜色性能.试验方法540C:用聚砜胶片测定紫外线辐射强度 |
Methods of testing plastics - Optical and colour properties, weathering - Determination of ultraviolet radiation intensity using polysulphone film |
| BS 6942-2-1989 |
氧燃料气体焊接和相关工艺用成套小型工具的设计和建造.第2部分:使用可充氧气和燃气容器的成套工具规范 |
Design and construction of small kits for oxy-fuel gas welding and allied processes - Specification for kits using refillable gas containers for oxygen and fuel gas |
| BS 5839-5-1988 |
建筑物火警监测及报警系统.第5部分:光束烟雾探测器规范 |
Fire detection and alarm systems for buildings - Specification for optical beam smoke detectors |
| BS 4781-1990 |
永久性压敏粘合塑料标签规范 |
Specification for pressure-sensitive adhesive plastics labels for permanent use |
| BS 4814-1990 |
封闭式热水加热系统用内隔膜式膨胀罐规范 |
Specification for expansion vessels using an internal diaphragm, for sealed hot water heating systems |
| BS 6058-1989 |
医疗诊断用旋转阳极X射线管和X射线管组件的规定和检验方法 |
Method of specifying and verifying the characteristics of rotating anode X-ray tubes and X-ray tube assemblies used in medical diagnosis |
| BS 4939-1987 |
铺地纺织物承受长期静态重负荷后厚度损失的测定方法 |
Method for determination of thickness loss of textile floor coverings after prolonged heavy static loading |
| BS 1660-3-1988 |
机用圆锥.第3部分:莫氏锥柄刀具用带锥度端面的回转头套筒和锥形套筒规范 |
Machine tapers - Specification for turret sockets and reduction sleeves with tapped ends for tools with Morse taper shanks |
| PP 7308-1986 |
高等院校教学用工程制图的实用规程 |
Engineering drawing practice for schools and colleges |
| BS 5660-1-1987 |
铁矿石取样方法.第1部分:手工增量取样方法 |
Methods of sampling iron ores - Manual method of increment sampling |
| BS 5661-1987 |
铁矿石试样的手工制备方法 |
Method for preparation of samples of iron ores by manual means |
| BS 1983-4-1987 |
机床与便携电动工具用卡盘规范.第4部分:影响电动工作状态卡盘性能的准则说明规范 |
Chucks for machine tools and portable power tools - Specification of criteria to be stated affecting performance of power operated workholding chucks at speed |
| BS 6123-1988 |
工业用低压开关设备和控制装置规范.D型交流双引线感应式近距离开关 |
Specification for low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - Form D, for alternating current, 2 terminals |
| BS 6721-5-1986 |
铜和铜合金的取样与分析.第5部分:采用火焰原子吸收分光光度法对铜与铜合金中锌的测定方法 |
Sampling and analysis of copper and copper alloys - Method for determination of zinc in copper and copper alloys by flame atomic absorption spectrophotometry |
| BS 6783-3-1986 |
镍、镍铁和镍合金的取样与分析.第3部分:采用火焰原子吸收光谱法镍铁中钴的测定方法 |
Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of cobalt in ferronickel by flame atomic absorption spectrometry |
| BS 6783-9-1986 |
镍、镍铁和镍合金的取样与分析.第9部分:镍铁中硅的测定方法(重力分析法) |
Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of silicon in ferronickel (gravimetric method) |
| BS 4742-7-1989 |
农用机械液压设备.第7部分:农用拖挂车辆液压制动系统管接头用油口连接规范 |
Hydraulic equipment for agricultural machinery - Specification for port connections for agricultural trailed vehicle hydraulic brake couplings |
| BS 5698-2-1989 |
脉冲技术和设备指南.第2部分:脉冲测量和分析:总则 |
Guide to pulse techniques and apparatus - Pulse measurement and analysis, general considerations |
| BS 585-1-1989 |
木楼梯.第1部分:家用带封闭式梯级竖板的楼梯,包括直踏步和斜踏步楼梯和直角转弯楼梯平台或全宽楼梯平台规范 |
Wood stairs - Specification for stairs with closed risers for domestic use, including straight and winder flights and quarter or half landings |
| BS 7007-3-1988 |
磨料制品.第3部分:非标准砂纸产品尺寸公差规范 |
Abrasive products - Specification for dimensional tolerances on non-standard coated abrasive products |
| BS 3936-7-1989 |
苗圃.第7部分:花坛花卉规范 |
Nursery stock - Specification for bedding plants |
| BS 6894-1987 |
粗制黄麻布管状织物规范 |
Specification for jute hessian tubing |
| BS 5268-5-1989 |
建筑用木材.第5部分:结构木材防腐处理惯例 |
Structural use of timber - Code of practice for the preservative treatment of structural timber |
| BS 903-A8-1990 |
橡胶的物理试验.第A8部分:回弹性的测定方法 |
Physical testing of rubber - Method for determination of rebound resilience |
| BS 5348-2-1989 |
肉类和肉类制品取样方法.第2部分:微生物检测试样制备 |
Methods for sampling meat and meat products - Preparation of test samples for microbiological examination |
| BS 4999-147-1988 |
旋转电机的一般要求.电机电刷及刷握的尺寸规范 |
General requirements for rotating electrical machines - Specification for dimensions of brushes and brush-holders for electrical machinery |
| BS 6721-7-1989 |
铜和铜合金的取样与分析.第7部分:用重力分析法对铜合金中镍的测定方法 |
Sampling and analysis of copper and copper alloys - Method for determination of nickel in copper alloys: gravimetric method |
| BS 6721-9-1989 |
铜和铜合金的取样与分析.第9部分:用火焰原子吸收分光光度法对铜合金中铅的测定方法 |
Sampling and analysis of copper and copper alloys - Method for determination of lead in copper alloys by flame atomic absorption spectrophotometry |
| BS 5600-3.6-1988 |
粉末冶金材料和制品.第3部分:烧结金属材料和制品（不包活硬质合金）试验方法.第6节:液体渗透率测定 |
Powder metallurgical materials and products - Methods of testing sintered metal materials and products, excluding hardmetals - Determination of fluid permeability |
| BS 1629-1989 |
出版文献资料查阅方法推荐标准 |
Recommendation for references to published materials |
| BS 7081-2-1989 |
利用IMFM法以252次磁通变换mm(6400次磁通变换/in)速率录制的数据交换用6.30mm(0.25in)磁带盒的建造和应用指 |
Guide to construction and use of 6.30 mm (0.25 in) magnetic tape cartridge for data interchange, using IMFM recording at 252 ftpmm (6400 ftpi) - Track format and method of recording for data interchange in start/stop mode |
| BS 3224-1-1988 |
民用机场的照明设备.进场跑道精确指示器系统中用的照明设备规范 |
Lighting fittings for civil land aerodromes - Specification for lighting units for use in precision approach path indicator systems |
| BS 2837-1988 |
包装箱提升装置用钢铰链与链带组件规范 |
Specification for steel links and strap assemblies for lifting attachments for packing cases |
| BS 4292-2-1989 |
金和金合金电镀层规定方法.第2部分:装饰或保护用金和金合金 |
Method for specifying electroplated coatings of gold and gold alloys - Gold and gold alloys for decorative and protective purposes |
| BS 5817-3-1989 |
视听、视频、电视设备及系统规范.第3部分:视听系统设备互连连接器规范 |
Specification for audiovisual, video and television equipment and systems - Specification for connectors for the interconnection of equipment in audiovisual systems |
| BS 5502-20-1990 |
农用建筑物与筑构物.第20部分:总体设计惯例 |
Buildings and structures for agriculture - Code of practice for general design considerations |
| BS 6818-2-1987 |
农用轮式拖拉机的前部安装联动机构和动力输出装置.第2部分:前部联动装置规范 |
Front-mounted linkage and power take-off for agricultural wheeled tractors - Specification for front linkage |
| BS 5244-1986 |
液压橡胶软管及软管组件的使用、贮藏及寿命期限推荐标准 |
Recommendations for application, storage and life expiry of hydraulic rubber hoses and hose assemblies |
| BS 3224-4-1988 |
民用机场的照明设备.高架照明设备规范 |
Lighting fittings for civil land aerodromes - Specification for elevated lighting units |
| BS 3224-5-1988 |
民用机场的照明设备.嵌入式照明设备规范 |
Lighting fittings for civil land aerodromes - Specification for inset lighting units |
| BS AU 222-1988 |
试验后圆盘制动垫表面及材料缺陷评定方法 |
Method of evaluating surface and material flaws of disc brake pads after testing |
| BS 1983-5-1989 |
机床与便携式电动工具用卡盘规范.第5部分:车床工作状态卡盘的安全操作实用规程 |
Chucks for machine tools and portable power tools - Code of practice for the safe operation of workholding chucks used on lathes |
| BS 1660-4-1989 |
机用锥销.第4部分:自动松开的7/24锥度轴头和刀具柄规范 |
Machine tapers - Specification for spindle noses and tool shanks with self-release 7/24 tapers |
| BS EN 2022-1990 |
带自润滑内衬的耐蚀钢的普通球面轴承规范.轻型系列.尺寸和负荷 |
Specification for bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Dimensions and loads |
| BS EN 2309-1990 |
实心铆钉孔径尺寸规范 |
Specification for hole sizes for solid rivets |
| BS EN 2011-1989 |
轴承规范.耐蚀钢的8号和9号直径系列机体刚性单列球轴承.尺寸和负荷 |
Specification for bearings - airframe rolling rigid single row ball bearings in corrosion resisting steel diameter series 8 and 9. Dimensions and loads |
| BS 817-1988 |
划线台规范 |
Specification for surface plates |
| BS 1983-3-1987 |
机床与便携电动工具用卡盘规范.第3部分:电动工件卡盘的底爪用弹性夹头垫尺寸规范 |
Chucks for machine tools and portable power tools - Specification for dimensions of collet pads for base jaws of power operated workholding chucks |
| BS 5270-1-1989 |
熟石膏和水泥用粘合剂.第1部分:建筑用熟石膏聚乙酸乙烯酯(PVAC)乳状粘合剂 |
Bonding agents for use with gypsum plasters and cement - Specification for polyvinyl acetate (PVAC) emulsion bonding agents for indoor use with gypsum building plasters |
| BS 7141-6-1989 |
窄幅织物.第6部分:鞋类用和其他用途的带子规范 |
Narrow fabrics - Specification for laces for footwear and other purposes |
| BS 3998-1989 |
森林管理推荐规范 |
Recommendations for tree work |
| BS 7033-1-1989 |
拭擦布和抛光布.第1部分:用于透明板的视觉抛光布规范 |
Cleaning and polishing cloths - Specification for optical polishing cloths for use on transparent plastics panels |
| BS 5350-0-1987 |
粘合剂的试验方法.一般说明 |
Methods of test for adhesives - General introduction |
| BS 2071-1989 |
索格利特萃取器规范 |
Specification for Soxhlet extractors |
| BS 6049-4-1988 |
茶叶试验方法.第4部分:总灰分含量测定 |
Methods of test for tea - Determination of total ash |
| BS 67-1987 |
天花板接线盒规范 |
Specification for ceiling roses |
| BS 3730-1-1987 |
不圆度评定.第1部分:不圆度测量术语 |
Assessment of departures from roundness - Glossary of roundness measurement terms |
| BS 799-8-1988 |
燃油设备.第8部分:雾化燃油器和高频加热器之间的连接尺寸规范 |
Oil burning equipment - Specification for connecting dimensions between atomizing oil burners and heat generators |
| BS AU 209-2-1988 |
车辆安全性.车内娱乐和通讯设备防盗安全系统规范 |
Vehicle security - Specification for security systems against theft of in-car equipment for entertainment and communication purposes |
| BS 4289-5-1989 |
油料种子分析方法.第5部分:脂肪酸度测定 |
Method for the analysis of oilseeds - Determination of acidity of fat |
| BS 4305-1-1989 |
聚丙烯家用浴盆.第1部分:精制浴盆规范 |
Baths for domestic purposes made of acrylic material - Specification for finished baths |
| BS 4361-7-1988 |
木工机械.第7部分:单面刨光用带旋转组合铣刀的单面压刨床规范 |
Woodworking machines - Specification for thickness planing machines with rotary cutterblock for one-side dressing |
| BS 6882-1987 |
固体天然橡胶和合成橡胶储存指南 |
Guide for storage of raw solid natural and synthetic rubber |
| BS 6166-3-1988 |
起重吊索.第3部分:多用途起重吊索选择及安全使用指南 |
Lifting slings - Guide to the selection and safe use of lifting slings for multi-purposes |
| BS 5752-11-1987 |
咖啡与咖啡制品试验方法.第11部分:速溶咖啡.自由流动和压实体密度测定 |
Methods of test for coffee and coffee products - Instant coffee: determination of free-flow and compacted bulk densities |
| BS AU 209-3-1988 |
车辆安全性.第3部分:乘用车和改型车玻璃安装用安全标记规范 |
Vehicle security - Specification for security marking of glazing for passenger cars and car derived vehicles |
| BS 5929-5-1988 |
食品感官分析方法.第5部分:"Ａ”和"非Ａ”试验 |
Methods for sensory analysis of food - 'A'-'not A' test |
| BS 3316-1-1987 |
焚化炉.第1部分:医院废物焚烧装置的标准性能要求规范 |
Incinerators. Specification for standard performance requirements for incineration plant for the destruction of hospital waste |
| BS 3316-4-1987 |
焚化炉.第4部分:医院废物焚烧装置的设计、规范、安装和使用的实用规程 |
Incinerators. Code of practice for the design, specification, installation and commissioning of incineration plant for the destruction of hospital waste |
| BS 6091-2-1987 |
电工用硬化纸板.第2部分:试验方法 |
Vulcanized fibre for electrical purposes - Methods of test |
| BS 3224-6-1988 |
民用机场照明设备.第6部分:障碍物照明设备规范 |
Lighting fittings for civil land aerodromes - Specification for obstacle lighting units |
| BS 1660-2-1988 |
机用圆锥.第2部分:莫氏锥柄刀具用锥形套和加长套筒规范 |
Machine tapers - Specification for reduction sleeves and extension sockets for tools with Morse taper shanks |
| BS 3816-1989 |
电源频率的电气绝缘用环氧树脂浇铸系统规范 |
Specification for epoxy resin casting systems used for electrical insulating applications at power frequencies |
| BS 4656-35-1987 |
机床精度及试验方法.第35部分:加工直径小于25mm的单轴滑枕转塔自动车床规范 |
Accuracy of machine tools and methods of test - Specification for capstan, turret and automatic lathes, single spindle type less than 25 mm diameter capacity |
| BS 5424-2-1987 |
低电压控制设备.第2部分:半导体固态连接器 |
Low-voltage controlgear - Specification for semiconductor contactors (solid state contactors) |
| BS 6818-1-1987 |
农用轮式拖拉机的前部安装联动机构和动力输出装置.第1部分:动力输出装置规范 |
Front-mounted linkage and power take-off for agricultural wheeled tractors - Specification for power take-off |
| BS 3396-3-1987 |
塑料增强用机织玻璃纤维织物.第3部分:聚酯树脂系统用成品布规范 |
Woven glass fibre fabrics for plastics reinforcement - Specification for finished fabrics for use with polyester resin systems |
| BS 903-A52-1986 |
橡胶的物理试验.第A52部分:在给定延伸率情况下,用应力测量法测定老化特性 |
Physical testing of rubber - Determination of ageing characteristics by measurement of stress at a given elongation |
| BS 1771-1-1989 |
制服和工作服用织物.第1部分:纯毛与混纺羊毛织物规范 |
Fabrics for uniforms and workwear - Specification for fabrics of wool and wool blends |
| BS 3690-3-1990 |
建筑与土木工程用沥青.第3部分:沥青与硬沥青、焦油和特立尼达湖地沥青混合料规范 |
Bitumens for building and civil engineering - Specification for mixtures of bitumen with pitch, tar and Trinidad lake asphalt |
| BS 4560-1990 |
制服衣衬用织物规范 |
Specification for fabrics for linings in uniform clothing |
| BS MA 104-1-1987 |
系列2船载驳船.第1部分:主要尺寸规范 |
Series 2 shipborne barges - Specification for main dimensions |
| BS 476-13-1987 |
建筑材料和结构的燃烧试验.第13部分:受热辐照制品着火性的测定方法 |
Fire tests on building materials and structures - Method of measuring the ignitability of products subjected to thermal irradiance |
| BS 3101-1986 |
主要用于煤矿与防爆式限动插头插座联用的控制电路和联锁电路规范 |
Specification for control and interlock circuits primarily associated with flameproof restrained plugs and sockets for use in coal mines |
| BS 6912-2-1989 |
运土机械的安全性.第2部分:履带式和轮式装载机额定操作负荷规范 |
Safety of earth-moving machinery - Specification for rated operating load for crawler and wheel loaders |
| BS 6388-2-1987 |
纸和纸板的加速老化.120℃或150℃下的干热处理方法 |
Accelerated ageing of paper and board - Method for dry heat treatment at 120 °C or 150 °C |
| BS 4370-3-1988 |
硬质微孔材料试验方法.第3部分:方法12和13 |
Methods of test for rigid cellular materials - Methods 12 and 13 |
| BS 6721-4-1986 |
铜和铜合金的取样与分析.第4部分:采用火焰原子吸收分光光度法对铜与铜合金中铬的测定方法 |
Sampling and analysis of copper and copper alloys - Method for determination of chromium in copper and copper alloys by flame atomic absorption spectrophotometry |
| BS 7298-1990 |
销售点电子资金划拔系统用卡要求和推荐标准一览表(EFT-POS) |
Schedule of requirements and recommendations for cards to be used in electronic funds transfer at point of sale (EFT-POS) |
| BS 3456-202.46-1990 |
家用和类似用途电器安全性规范.第202部分:专门要求.第46节:民用电蒸气锅 |
Specification for safety of household and similar electrical appliances - Particular requirements - Specification for safety of household and similar electrical appliances - Particular requirements - Commercial electric steam cookers |
| BS 1924-1-1990 |
土木工程稳定材料.第1部分:材料稳定处理前的一般要求、取样、试样制备和试验 |
Stabilized materials for civil engineering purposes - General requirements, sampling, sample preparation and tests on materials before stabilization |
| BS 5817-18-1989 |
视听、视频和、电视设备及系统规范.第18部分:视听用内装三端双向可控硅开关元件的自动滑动放映机连接器规范 |
Specification for audiovisual, video and television equipment and systems - Specification for connectors for automatic slide projectors with built-in triacs for audiovisual application |
| BS 5218-1989 |
木材防腐剂.用幼虫转化(实验室法)测定抗家具窃蠹(De Geer)毒值 |
Wood preservatives - Determination of the toxic values against Anobium punctatum (De Geer) by larval transfer (laboratory method) |
| BS 5106-1988 |
螺旋形抗挤压支承环及其壳体尺寸规范 |
Specification for dimensions of spiral anti-extrusion back-up rings and their housings |
| BS 1924-2-1990 |
土木工程稳定材料.第2部分:水泥稳定和石灰稳定材料试验方法 |
Stabilized materials for civil engineering purposes - Methods of test for cement-stabilized and lime-stabilized materials |
| BS 6986-4-1990 |
速溶茶的分析.第4部分:总灰分的测定方法 |
Analysis of instant tea - Method for determination of total ash |
| BS 3406-1-1986 |
粒度分布测定方法.第1部分:粉末取样指南 |
Methods for determination of particle size distribution - Guide to powder sampling |
| BS 1595-1-1986 |
工业用2－丙醇（异丙醇）.第1部分:2－丙醇规范（异丙醇） |
Propan-2-ol (isopropyl alcohol) for industrial use - Specification for propan-2-ol (isopropyl alcohol) |
| BS 6884-1987 |
单位货物平面尺寸推荐标准 |
Recommendations for plan dimensions of unit loads |
| BS 1806-1989 |
环形密封圈("O"形环)及其安装座(英制系列)的尺寸规范 |
Specification for dimensions of toroidal sealing rings ('O'-rings) and their housings (inch series) |
| BS 1881-205-1986 |
混凝土试验.第205部分:混凝土的射线照相术推荐标准 |
Testing concrete - Recommendations for radiography of concrete |
| BS 1902-6-1986 |
耐火材料的试验方法.第6部分:陶瓷纤维制品 |
Methods of testing refractory materials - Ceramic fibre products |
| BS 4732-1988 |
信息交换用磁带标记和文件结构规范 |
Specification for file structure and labelling of magnetic tape for information interchange |
| BS 4783-1-1988 |
数据处理和信息存储用介质的储存、传送和维护.第1部分:磁盘组、存贮模块和磁盘盒推荐标准 |
Storage, transportation and maintenance of media for use in data processing and information storage - Recommendations for disk packs, storage modules and disk cartridges |
| BS 4783-2-1988 |
数据处理和信息存储用介质的储存、传送和维护.第2部分:开敞式卷轴磁带推荐标准 |
Storage, transportation and maintenance of media for use in data processing and information storage - Recommendations for magnetic tape on open spools |
| BS 845-2-1987 |
蒸汽、热水和高温传热流体用锅炉热性能的估算方法.第2部分:综合方法 |
Methods for assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids - Comprehensive procedure |
| BS 5350-G3-1987 |
粘合剂试验方法.第G3部分:金属表面用厌氧粘合剂性能测定 |
Methods of test for adhesives - Determination of ability of anaerobic adhesives to set on metal surfaces |
| BS 417-2-1987 |
镀锌低碳钢水槽和盖、箱和筒.第2部分:米制单位 |
Specification for galvanized low carbon steel cisterns, cistern lids, tanks and cylinders - Metric units |
| BS 3130-1-1989 |
包装术语.总则(包括辅助材料) |
Glossary of packaging terms - General (including auxiliary materials) |
| BS 6413-8-1988 |
润滑剂、工业用油和相关产品(L级).第8部分:R系列分类(暂时防腐保护) |
Lubricants, industrial oils and related products (class L) - Classification for family R (temporary protection against corrosion) |
| BS 6889-1987 |
皮带同步传动轮齿条规范 |
Specification for generating racks for synchronous belt drive pulleys |
| BS 6907-5-1988 |
露天矿和采石场的电气装置.第5部分:操作推荐标准 |
Electrical installations for open-cast mines and quarries - Recommendations for operation |
| BS 1041-7-1988 |
温度测量.第7部分:温度/时间指示器的选择和使用指南 |
Temperature measurement - Guide to selection and use of temperature/time indicators |
| BS 1186-2-1988 |
细木工用木材与制品质量.第2部分:制品质量规范 |
Timber for and workmanship in joinery - Specification for workmanship |
| BS 6765-4-1987 |
休闲式房车.大篷车.第4部分:下部齿轮规范 |
Leisure accommodation vehicles - Caravans - Specification for undergear |
| BS 2782-9 Method 901A-1988 |
塑料试验方法.第9部分:取样和试样制备.试验方法901A:热塑性材料模压试样 |
Methods of testing plastics - Sampling and test specimen preparation - Compression moulding test specimens of thermoplastic materials |
| BS 3555-1988 |
环形扳手规范 |
Specification for ring wrenches |
| BS 7202-1989 |
矿用非激励低压控制/联锁电路和低压接地故障监控电路规范 |
Specification for non-incendive low voltage control/interlock and low voltage earth fault monitoring circuits for use in mines |
| BS 3735-1987 |
塑料和橡胶吸尘箱盖规范 |
Specification for plastics and rubber dustbin lids |
| BS 3181-1-1987 |
气流法测定棉纤维性能.第1部分:单压气流法测定纤维细度值 |
Methods for determination of cotton fibre properties by the airflow method - Determination of micronaire value by the single compression airflow method |
| BS 6705-1987 |
煤矿安全电路用电气测量仪器规范 |
Specification for electrical measuring instruments for use on intrinsically safe circuits in coal mines |
| BS 5760-0-1986 |
系统、设备及部件的可靠性.第0部分:可靠性导则 |
Reliability of systems, equipment and components - Introductory guide to reliability |
| BS 3072-1989 |
镍与镍合金规范:薄板材和中厚板材 |
Specification for nickel and nickel alloys: sheet and plate |
| BS 1377-7-1990 |
土木工程用土壤试验方法.第7部分:剪切强度试验(总应力) |
Methods of test for soils for civil engineering purposes - Shear strength tests (total stress) |
| BS 4639-1987 |
牵引式农用车辆制动器和制动系统规范 |
Specification for brakes and braking systems for towed agricultural vehicles |
| BS 6837-1987 |
与1200mmｘ1000mm、1200mmｘ800mm托盘和成组载荷模数有关的刚性长方形运输包装的平面尺寸规范 |
Specification for plan dimensions of rigid rectangular transport packages with a modular relationship to 1200 mm x 1000 mm and 1200 mm x 800 mm pallets and unit loads |
| BS AU 215-3-1988 |
动力输出装置.第3部分:商用道路车辆安装在尾部的功率输出装置的连接件尺寸规范 |
Power take offs (PTOs) - Specification for dimensions of connections for rear mounted power take offs for commercial road vehicles |
| BS AU 207-1986 |
汽车收音机安装空间尺寸规范 |
Specification for dimensions of car radio installation space |
| BS 6189-1989 |
有关织物、纤维、纱线及工艺的术语词汇 |
Glossary of terms relating to fabrics and associated fibres, yarns and processes |
| BS 5609-1986 |
船舶用印制压敏胶粘标签规范,包括标签的基本材料要求 |
Specification for printed pressure-sensitive, adhesive-coated labels for marine use, including requirements for label base material |
| BS EN 2596-1990 |
耐蚀钢制的镀镉径向锯齿锁紧垫圈规范.尺寸 |
Specification for washers, lock, with radial serrations, in corrosion resisting steel, cadmium plated - Dimensions |
| BS 998-1990 |
食用真空盐规范 |
Specification for vacuum salt for food use |
| BS 4522-1988 |
工业用液态化工产品在20℃时绝对浓度的测定方法 |
Method for determination of absolute density at 20 °C of liquid chemical products for industrial use |
| BS 3424-17-1987 |
涂覆织物试验.第17部分:方法20.浸水尺寸稳定性测定方法 |
Testing coated fabrics - Method 20 - Method for determination of dimensional stability to water immersion |
| BS 3568-1988 |
羊毛的碱溶解度测定方法 |
Method for determination of solubility of wool in alkali |
| BS 3900-A16-1986 |
涂料试验方法.第A16集:液体涂料试验(化学试验除外).第16部分:刷子涂刷的自然扩展速率测定 |
Methods of test for paints - Tests on liquid paints (excluding chemical tests) - Determination of natural spreading rate by brush application |
| BS 3900-A17-1986 |
涂料试验方法.第A17集:液体涂料试验(化学试验除外).第17部分:试验板条以规定扩展速率涂漆 |
Methods of test for paints - Tests on liquid paints (excluding chemical tests) - Coating of test panels at a specified spreading rate |
| BS 3900-D8-1986 |
涂料试验方法.第D8集:涂料膜光学试验.第8部分:颜色和色差测定:原理 |
Methods of test for paints - Optical tests on paint films - Determination of colour and colour difference: principles |
| BS 3958-5-1986 |
隔热材料.第5部分:粘结人造矿物纤维板规范 |
Thermal insulating materials - Specification for bonded man-made mineral fibre slabs |
| BS 4656-37-1989 |
机床精度及试验方法.第37部分:桥式龙门铣床规范 |
Accuracy of machine tools and methods of test - Specification for plano-milling machines, gantry type |
| BS 4407-1988 |
纤维混纺织物的定量分析方法 |
Methods for quantitative analysis of fibre mixtures |
| BS 770-8-1987 |
奶酪的化学分析法.第8部分:氮含量的测定(比较法) |
Methods for chemical analysis of cheese - Determination of nitrogen content (reference method) |
| BS 3332-1987 |
轴承用巴比合金锭规范 |
Specification for white metal bearing alloy ingots |
| BS 5766-12-1986 |
动物饲料分析方法.第12部分:棉籽酚含量测定 |
Methods for analysis of animal feeding stuffs - Determination of gossypol |
| BS 5499-2-1986 |
消防安全标志、通告和图形符号.第2部分:自发光标记规范 |
Fire safety signs, notices and graphic symbols - Specification for self-luminous fire safety signs |
| BS 879-2-1988 |
水井套管.第2部分:井套管和开缝井套管用热塑性塑料管规范 |
Water well casing - Specification for thermoplastics tubes for casing and slotted casing |
| BS 6043-1.7-1988 |
制铝工业用炭素材料取样与试验方法.第1部分:电极硬柏油脂.第7节:表观密度测定(浮力法) |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of apparent density (buoyancy method) |
| BS 3396-2-1987 |
塑料增强用机织玻璃纤维织物.第2部分:退浆织物规范 |
Woven glass fibre fabrics for plastics reinforcement - Specification for desized fabrics |
| BS AU 225-1988 |
商用道路车辆转向球形接合件尺寸规范 |
Specification for dimensions of steering ball joints for commercial road vehicles |
| BS 4361-8-1988 |
木工机械.第8部分:2面、3面或4面刨光用刨床规范 |
Woodworking machines - Specification for planing machines for two-, three- or four-side dressing |
| BS 4361-9-1988 |
木工机械.第9部分:平面刨床和单面压刨床规范 |
Woodworking machines - Specification for surface planing and thicknessing machines |
| BS 7141-5-1990 |
窄幅织物.第5部分:含天然橡胶的弹性平织带规范 |
Narrow fabrics - Specification for elastic flat braids containing natural rubber |
| BS 6981-1988 |
羊毛含酸量的测定方法 |
Method for determination of acid content of wool |
| BS 1881-204-1988 |
混凝土试验.第204部分:电磁式保护层厚度计使用的推荐方法 |
Testing concrete - Recommendations on the use of electromagnetic covermeters |
| BS 5942-13-1989 |
高保真度音响设备及系统最低性能要求.第13部分:车辆(如汽车)用高保真系统规范.调频无线电调谐装置 |
High fidelity audio equipment and systems; minimum performance requirements - Specification for high fidelity systems for use in vehicles (for example, motor cars); FM radio tuner units |
| BS 696-1-1989 |
奶和奶制品中脂肪含量的测定(盖尔伯法).第1部分:仪器规范 |
Determination of fat content of milk and milk products (Gerber method) - Specification for apparatus |
| BS 4921-1988 |
铁或钢件上粉末镀锌层规范 |
Specification for sherardized coatings on iron or steel |
| BS 6361-1988 |
电控液压设备用三相插接件规范 |
Specification for three-pin plug connectors for electrically controlled fluid power equipment |
| BS 2634-1-1987 |
表面粗糙度比对试样.第1部分:车、磨、镗、铣、成形和刨削试样规范 |
Roughness comparison specimens - Specification for turned, ground , bored, milled, shaped and planed specimens |
| BS 2634-2-1987 |
表面粗糙度比对试样.第2部分:电火花加工、喷丸处理、喷砂处理及抛光试样规范 |
Roughness comparison specimens - Specification for spark-eroded, shot-blasted, grit-blasted, and polished specimens |
| BS 5685-5-1987 |
电度表.第5部分:多费率记数器输入输出开关或逻辑电路规范 |
Electricity meters - Specification for input and output switching or logic arrangements for multi-rate registers for electricity meters |
| BS 6168-1987 |
非金属正齿轮规范 |
Specification for non-metallic spur gears |
| BS 4656-2-1988 |
机床精度和试验方法.第2部分:仿形车床和仿形附件规范 |
Accuracy of machine tools and methods of test - Specification for copying lathes and copying attachments |
| BS EN 2354-1989 |
耐蚀钢操纵钢索的带螺纹的孔眼端头规范.尺寸和负荷 |
Specification for eye-ends, threaded, control cable in corrosion resisting steel - Dimensions and loads |
| BS 4289-8-1988 |
油料种子分析方法.湿度计校准检验 |
Methods for analysis of oilseeds - Check of the calibration of moisture meters |
| BS 4361-16-1988 |
木工机械.第16部分:单链插床规范 |
Woodworking machines - Specification for single chain mortising machines |
| BS 5536-1988 |
缩微胶片技术图纸制备推荐标准 |
Recommendations for preparation of technical drawings for microfilming |
| BS 3908-10-1989 |
铅和铅合金取样与分析方法.第10部分:铅合金中锑含量测定(滴定法) |
Methods for the sampling and analysis of lead and lead alloys - Antimony in lead alloys (titrimetric method) |
| BS 7254-2-1990 |
矫形外科植入物.第2部分:材料和精加工一般要求规范 |
Orthopaedic implants - Specification for general requirements for materials and finish |
| BS 5293-1991 |
橡胶工业用炭黑的取样和试验.第19部分:测定二丁基邻苯二甲酸酯吸收数值的样品的制备(压缩取样) |
Sampling and testing carbon black for use in the rubber industry. Preparation of samples for determination of dibutyl phthalate absorption number (compressed sample) |
| BS 6102-4-1991 |
自行车.第4部分:术语 |
Cycles - Glossary of terms |
| BS 3877-1991 |
金属切削用带锯条规范 |
Specification for metal cutting bandsaw blades |
| BS 6102-11-1991 |
自行车.第11部分:车把主管和弯管组装尺寸规范 |
Cycles - Specification for assembly dimensions for stem and handlebar bend |
| BS 3800-3-1990 |
机床一般试验.第3部分:机床在热畸变负载条件下工作性能试验方法 |
General tests for machine tools - Method of testing performance of machines operating under loaded conditions in respect of thermal distortion |
| BS 1881-124-1988 |
混凝土试验.第124部分:硬化混凝土的分析方法 |
Testing concrete - Methods for analysis of hardened concrete |
| BS 6049-6-1988 |
茶叶试验方法.第6部分:酸不溶灰分含量测定 |
Methods of test for tea - Determination of acid-insoluble ash |
| BS 4591-1990 |
有机液体(石油产品除外)蒸馏特性的测定方法 |
Method for determination of distillation characteristics of organic liquids (other than petroleum products) |
| BS 5502-81-1989 |
农用建筑物与构筑物.第81部分:化学品库房设计和建造惯例 |
Buildings and structures for agriculture - Code of practice for design and construction of chemical stores |
| BS 1196-1989 |
田间排水用陶土管及连接管规范 |
Specification for clayware field drain pipes and junctions |
