| BS 6184-1981 |
仪表变压器部分放电测量方法 |
Method for measuring partial discharges in instrument transformers |
| BS 4929-2-1973 |
常扭矩式钢质六角螺母规范.第2部分:统一英制系列 |
Specification for steel hexagon prevailing-torque type nuts - Unified (inch) series |
| BS EN 2713-007-2005 |
航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和200 °C之间.屏蔽式（螺旋式）和有护套的可印 |
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, UV laser printable - Product standard |
| BS EN 3155-003-2005 |
航空航天系列.连接部件中用电连接器.第003部分: S级、压紧、A型电连接器插座.产品标准 |
Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, female, type A, crimp, class S. Product standard |
| BS EN 3155-008-2005 |
航空航天系列.连接部件中用电连接器.第008部分: S级、A型、压紧、电连接器插头.产品标准 |
Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, male, type A, crimp, class S. Product standard |
| BS EN 3155-018-2005 |
航空航天系列.连接部件中用电连接器.第018部分: S级、压紧、A型电连接器插头.产品标准 |
Aerospace series - Electrical contacts used in elements of connection - Part 018: Contacts, electrical, male, type A, crimp, class S - Product standard |
| BS EN 3155-019-2005 |
航空航天系列.连接部件中用电连接器.第019部分: S级、压紧、A型电连接器插座.产品标准 |
Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, female, type A, crimp, class S. Product standard |
| BS 5825-1980 |
工业用低压开关设备和控制装置规范.安装围栏.终端块固定用 G形型材 |
Specification for low voltage switchgear and controlgear for industrial use - Mounting rails - G-profile for the fixing of terminal blocks |
| BS 5583-1978 |
工业用低压开关设备和控制装置规范.专用触点继电器用接线端标记、识别号码和识别字母 |
Specification for low voltage switchgear and controlgear for industrial use - Terminal marking, distinctive number and distinctive letter for particular contactor relays |
| BS 5584-1978 |
工业用低压开关设备和控制装置规范.支承轨.设备快速安装用35mm宽凹顶轨 |
Specification for low voltage switchgear and controlgear for industrial use - Mounting rails - Top hat rails 35 mm wide for snap-on mounting of equipment |
| BS 5824-1980 |
工业用低压开关设备及控制装置规范.安装围栏.设备安装用 C形型材及附件 |
Specification for low voltage switchgear and controlgear for industrial use - Mounting rails - C-profile and accessories for the mounting of equipment |
| BS 1362-1973 |
家用及类似用途的通用熔断丝(主要用于插头)规范 |
Specification for general purpose fuse links for domestic and similar purposes (primarily for use in plugs) |
| BS 4678-4-1982 |
电缆管道.第4部分:绝缘材料制电缆管道规范 |
Cable trunking - Specification for cable trunking made of insulating material |
| BS 4119-1967 |
固定电阻器电流噪声测量方法 |
Method of measurement of current noise generated in fixed resistors |
| BS 5585-1978 |
工业用低压开关设备和控制装置规范.支承轨.设备快速安装用75mm宽凹顶轨 |
Specification for low voltage switchgear and controlgear for industrial use - Mounting rails - Top hat rails 75 mm wide for snap-on mounting of equipment |
| BS 2698-1971 |
摄影软片存放盒与标志规范 |
Specification for containers and notes for filmstrips |
| BS 4973-2-1973 |
衬里规范.第2部分:非织造热融衬里 |
Interlinings - Nonwoven fusible interlinings |
| BS 90-1975 |
直接作用的电记录仪表及其附件规范 |
Specification for direct-acting electrical recording instruments and their accessories |
| BS 3338-14-1965 |
锡及锡合金的取样及分析方法.第14部分:轴承用巴比合金锭取样方法 |
Methods for the sampling and analysis of tin and tin alloys - Method for the sampling of white metal bearing alloy ingots |
| BS 3338-15-1965 |
锡及锡合金取样及分析方法.第15部分:轴承用巴比合金中铜和铅含量测定方法(电解镀层法) |
Methods for the sampling and analysis of tin and tin alloys - Method for the determination of copper and lead in white metal bearing alloys (electrodeposition method) |
| BS 2782-1 Method 150C-1983 |
塑料试验方法.第1部分:热性能.试验方法150C:挠性聚氯乙烯板低温延伸率测定 |
Methods of testing plastics - Thermal properties - Determination of low temperature extensibility of flexible polyvinyl chloride sheet |
| BS 2782-1 Method 150D-1976 |
塑料试验方法.第1部分:热性能.试验方法150D:薄膜与薄片冷裂温度 |
Methods of testing plastics - Thermal properties - Cold crack temperature of film and thin sheeting |
| BS 5923-2-1980 |
橡胶化学分析方法.第2部分:橡胶制品锌含量测定用EDTA滴定法 |
Methods for chemical analysis of rubber - EDTA titrimetric method for determination of zinc content of rubber products |
| BS 4727-1 Group 01-1983 |
电工、电力、电信、电子学、照明和颜色术语词汇.电力、电信和电子学通用术语.基本术语 |
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms - Terms common to power, telecommunications and electronics - Fundamental terminology |
| BS EN 4057-303-2005 |
航空航天系列.导线电缆扎匝.试验方法.防液 |
Cable ties for harnesses — Test methods — Part 303: Resistance to fluids |
| BS 4842-1984 |
凃用于外部建筑的铝合金挤压件、薄板材和预成型件上的液态有机涂层和液态有机涂层的规范 |
Specification for liquid organic coatings for application to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with liquid or |
| BS 3890-1965 |
辐射监测胶片的试验、校准与处理的一般推荐标准 |
General recommendations for the testing, calibration and processing of radiation monitoring films |
| BS 5128-1974 |
形象艺术用薄膜尺寸规范 |
Specification for sizes of film for graphic arts use |
| BS 1917-1968 |
幻灯片和摄影软片规范 |
Specification for slides and film strips |
| BS 2453-1973 |
轮辐用钢丝规范 |
Specification for steel wire for spokes |
| BS 5506-3-1977 |
洗涤盆规范.第3部分:洗涤盆(一或三个泄水孔).材料、质量、设计与结构 |
Specification for wash basins - Wash basins (one or three tap holes) - Materials, quality, design and construction |
| BS 5505-3-1977 |
坐浴盆规范.仅含上供水槽的上釉陶瓷坐浴盆.质量、制造工艺与除连接尺寸外的功能尺寸 |
Specification for bidets - Vitreous china bidets over rim supply only - Quality, workmanship and functional dimensions other than connecting dimensions |
| BS 1254-1981 |
塑料马桶座规格 |
Specification for WC seats (plastics) |
| BS 3107-1973 |
小型焚化炉规范 |
Specification for small incinerators |
| BS 5688-18-1979 |
工业用硼酸、氧化硼、四硼酸二钠、高硼酸钠与粗硼酸钠的试验方法.过硼酸钠溶解速率测定 |
Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use - Determination of rate of solution of sodium perborates |
| BS 3143-1-1985 |
道路告警信号灯.第1部分:煤油灯规范 |
Road danger lamps - Specification for kerosine burning lamps |
| BS 5464-3-1983 |
光学字符识别.第3部分:信息处理用机读字符(MICR和OCR)的编码方法 |
Optical character recognition - Method of coding machine readable characters (MICR and OCR) for information processing |
| BS 5074-1974 |
精密测量用各种长短杆式温度计规范 |
Specification for short and long solid-stem thermometers for precision use |
| BS 1743-1985 |
奶粉和奶粉制品的分析方法.第19部分:焦化颗粒含量的测定 |
Methods for analysis of dried milk and dried milk products. Determination of scorched particles content |
| BS 4672-1-1971 |
包装件运输和储存危害指南.第1部分:气候性危害 |
Guide to hazards in the transport and storage of packages - Climatic hazards |
| BS 5257-1975 |
卧式端吸离心泵(16bar)规范 |
Specification for horizontal end-suction centrifugal pumps (16 bar) |
| BS 3248-1986 |
固体燃料器具用火花防护罩规范 |
Specification for sparkguards for use with solid fuel appliances |
| BS 2808-1969 |
地方当局用的美术水彩画笔的规范 |
Specification for artists' water-colour brushes for local authorities |
| BS 4831-1985 |
矿用链式输送机的钩环式连接器部件规范 |
Specification for shackle type connector units for chain conveyors for mining |
| BS 6522-1984 |
绝缘油水饱和百分比测定方法 |
Methods for determination of percentage water saturation of insulating oil |
| BS 6604-1985 |
起动器蓄电池安全操作实用规程 |
Code of practice for safe operation of starter batteries |
| BS 5655-9-1985 |
电梯与服务电梯.第9部分:导轨规范 |
Lifts and service lifts - Specification for guide rails |
| BS MA 5-1970 |
阀门黄铜名牌规范 |
Specification for brass service nameplates for valves |
| BS 3048-1958 |
烟道气体连续取样与自动分析规程.指示器与记录仪 |
Code for the continuous sampling and automatic analysis of flue gases: indicators and recorders |
| BS 9074 N002-1974 |
固定式聚苯乙烯薄膜介质电容器详细规范.轴向端接管状绝缘壳体.全面评定级 |
Detail specification for fixed polystyrene foil dielectric capacitors - Tubular insulated case, axial terminations - Full asessment level |
| BS 6504-1984 |
纸、纸板吸水性的测定方法(克莱姆法) |
Method for determination of water absorption of paper and board (Klemm method) |
| BS 5721-1979 |
飞机噪声测量用频率加权(D加权)规范 |
Specification for frequency weighting for the measurement of aircraft noise (D-weighting) |
| BS 6075-4-1981 |
工业用氢氧化钠取样和试验方法.第4部分:二氧化硅含量测定 |
Methods of sampling and test for sodium hydroxide for industrial use - Determination of silica content |
| BS 6075-5-1981 |
工业用氢氧化钠取样和试验方法.第5部分:主要试验溶液取样和制备 |
Methods of sampling and test for sodium hydroxide for industrial use - Sampling and preparation of main test solution |
| BS 6538-1-1985 |
纸、纸板的空气磁导.第1部分:空气磁导的测定方法:试验的一般特性 |
Air permeance of paper and board - Method for determination of air permeance: general aspects of testing |
| BS 6043-2.1-1985 |
制铝工业用炭素材料取样与试验方法.第2部分:电极用焦炭.第1节:取样 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Sampling |
| BS 893-1978 |
导管输气粒状物质浓度的测量方法 |
Method for the measurement of the concentration of particulate material in ducts carrying gases |
| BS 5344-1985 |
旋转和冲击气动工具的性能试验方法 |
Methods for performance tests for rotary and percussive pneumatic tools |
| BS 5347-1976 |
电信和电子设备变压器和感应线圈用的硅铁带绕铁芯规范 |
Specification for silicon-iron strip-wound cores for use in transformers and inductors for telecommunications and electronic equipment |
| BS 4531-1986 |
轻便式和移动式槽形皮带输送机规范 |
Specification for portable and mobile troughed belt conveyors |
| BS 9305 N041-1972 |
硅稳压器二极管详细规范.400mW、2.7-33V(5％)、密封、玻璃封装.一般应用范围Q |
Detail specification for silicon voltage regulator diodes - 400 mW, 2.7 to 33 V (5%), hermetically sealed, glass encapsulation - General application category Q |
| BS 3900-B6-1986 |
涂料试验方法.第B6集:液体涂料与干涂料膜化学检验.第6部分:可溶性铅含量测定 |
Methods of test for paints - Tests involving chemical examination of liquid paints and dried paint films - Determination of 'soluble' lead content |
| BS 3900-B7-1986 |
涂料试验方法.第B7集:液体涂料与干涂料膜试验化学检验.第7部分:可溶性锑含量测定 |
Methods of test for paints - Tests involving chemical examination of liquid paints and dried paint films - Determination of 'soluble' antimony content |
| BS 5245-1975 |
不锈钢软钎焊连接用磷酸基焊剂 |
Specification for phosphoric acid based flux for soft soldered joints in stainless steel |
| BS 4895-1981 |
通用半空心铆钉规范 |
Specification for semi-tubular rivets for general purpose use |
| BS 4258-4-1975 |
工业用磷酸(正磷酸)试验方法.第4部分:氟含量测定 |
Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of fluorine content |
| BS 6091-1-1981 |
电工用硬化纸板.第1部分:一般要求规范 |
Vulcanized fibre for electrical purposes - Specification of general requirements |
| BS 2782-4 Method 434D-1975 |
塑料试验方法.第4部分:化学性能.试验方法434D:用分光光度法测定聚烯烃混合料抗氧化剂 |
Methods of testing plastics - Chemical properties - Determination of antioxidants in polyolefin compounds by a spectrophotometric method |
| BS 2782-4 Method 451A-1978 |
塑料试验方法.第4部分:化学性能.酚醛模制件的丙酮可溶物的测定 |
Methods of testing plastics - Chemical properties - Determination of acetone-soluble matter in phenolic mouldings |
| BS 969-1982 |
普通极限量规的极限和公差规范 |
Specification for limits and tolerances on plain limit gauges |
| BS 1044-1-1964 |
量规毛坯规范.塞规、环规与卡规 |
Specificaton for gauge blanks - Plug, ring and calliper gauges |
| BS 2799-1974 |
建筑与工程用动力驱动塔式起重机规范 |
Specification for power-driven tower cranes for building and engineering construction |
| BS 3655-1981 |
铺地织物的标签推荐标准 |
Recommendations for informative labelling of textile floor coverings |
| BS 3641-2-1980 |
机床符号.数控符号规范 |
Symbols for machine tools - Specification for numerical control symbols |
| BS 721-1-1963 |
蜗轮传动装置规范.第1部分:英制单位 |
Specification for worm gearing - Imperial units |
| BS 4185-1-1967 |
机床零件.第1部分:防松螺母("c"型,凹头紧固螺钉锁紧) |
Machine tool components - Locknuts ('C' type, socket set screw locking) |
| BS 1945-1971 |
加热器具(煤气、电与油的)的炉栏规范 |
Specification for fireguards for heating appliances (gas, electric and oil-burning) |
| BS 1877-8-1974 |
家庭床上用品.第8部分:家用枕头和软垫(泡沫橡胶枕头和软垫除外) |
Domestic bedding - Pillows and bolsters for domestic use (excluding cellular rubber pillows and bolsters) |
| BS 3483-B3-1982 |
涂料用颜料试验方法.第B3部分:筛出残余物测定(人工水法) |
Methods for testing pigments for paints - Part B3. Determination of residue on sieve (water method, using a manual procedure) |
| BS 434-1-1984 |
铺路用乳化沥青(阳离子和阴离子型).第1部分:铺路用乳化沥青规范 |
Bitumen road emulsions (anionic and cationic) - Specification for bitumen road emulsions |
| BS 1446-1973 |
道路与人行道用地沥青砂胶(天然岩石地沥青细集料)规范 |
Specification for mastic asphalt (natural rock asphalt fine aggregate) for roads and footways |
| BS 3238-2-1964 |
伺服机构零件图形符号.第2部分:普通伺服机构 |
Graphical symbols for components of servo-mechanisms - General servo-mechanisms |
| BS 958-1968 |
精密工程用酒精水准仪规范 |
Specification for spirit levels for use in precision engineering |
| BS 3238-1-1960 |
伺服机构零件图形符号.第1部分:饱和电抗器与磁放大器 |
Graphical symbols for components of servo-mechanisms - Transductors and magnetic amplifiers |
| BS 4499-1984 |
纸浆碱溶解度的测定方法 |
Method for determination of alkali solubility of pulp |
| BS 4574-1970 |
采用 K和N 墨水测定纸和纸板吸墨性推荐标准 |
Recommendation for the determination of the ink absorbency of paper and board by use of K & N ink |
| BS 662-2-1978 |
工业用二硫化碳.第2部分:取样和试验方法 |
Carbon disulphide for industrial use - Sampling and methods of test |
| BS 5077-1974 |
同BS 4507规定的润滑脂筒配合使用的润滑脂枪(手动操作杆型)规范 |
Specification for grease guns (hand-operated lever type) for use with cartridges complying with BS 4507 |
| BS 2761-1983 |
球面接头规范 |
Specification for spherical ground joints |
| BS 5470-1977 |
不带温度计的玻璃酒精比重计规范 |
Specification for glass alcohol hydrometers not incorporating a thermometer |
| BS 4817-1972 |
瓦楞纤维纸板厚度的测定方法 |
Method for the determination of the thickness of corrugated fibreboard |
| BS 4401-13-1979 |
肉及肉制品试验方法.第13部分:葡萄糖酸-δ－内酯含量测定(比对法) |
Methods of test for meat and meat products - Determination of glucono-delta-lactone content (reference method) |
| BS MA 41-1975 |
两吨式通用吊艇柱规范 |
Specification for two tonne general purpose davits |
| BS 676-1982 |
颈部有刻度的烧瓶(苯酚型)规范 |
Specification for flasks with graduated necks (phenols type) |
| BS 4322-1968 |
医院用车辆(如手推车)减震器推荐标准 |
Recommendations for buffering on hospital vehicles such as trolleys |
| BS 5305-1984 |
乳品工业工厂与设备的清洁和消毒实用规程 |
Code of practice for cleaning and disinfecting of plant and equipment used in the dairying industry |
| BS AU 170-1979 |
后视镜反射率的测量方法 |
Methods for measurement of reflectance of rear view mirrors |
| BS 2050-1978 |
软聚合材料导电和抗静电制品电阻规范 |
Specification for electrical resistance of conducting and antistatic products made from flexible polymeric material |
| BS 978-2-1952 |
小节距齿轮.第2部分:摆线齿轮 |
Specification for fine pitch gears - Cycloidal type gears |
| BS 978-3-1952 |
小节距齿轮.第3部分:伞齿轮 |
Specification for fine pitch gears - Bevel gears |
| BS 2007-1975 |
公制模数为 1至 8的圆形剃齿刀精度要求规范 |
Specification for circular gear shaving cutters, 1 to 8 metric module, accuracy requirements |
| BS 1296-1-1970 |
单刃刀具规范.第1部分:刀柄部 |
Specification for single point cutting tools - Shank sections |
| BS 1296-2-1972 |
单刃刀具规范.第2部分:命名 |
Specification for single point cutting tools - Nomenclature |
| BS 4272-1-1968 |
麻醉机和止痛机.由专门容器分别供给氧化亚氮和氧气的即供式麻醉机 |
Anaesthetic and analgesic machines - Anaesthetic machines of the on-demand type supplied with nitrous oxide and oxygen from separate containers |
| BS 6169-1-1981 |
液态烃类体积测量方法.第1部分:置换流量计系统(不包括配剂泵) |
Methods for volumetric measurement of liquid hydrocarbons - Displacement meter systems (other than dispensing pumps) |
| BS AU 180-2-1982 |
制动衬垫.第2部分:衬垫材料内抗剪强度的测量方法 |
Brake linings - Method for measurement of internal shear strength of lining material |
| BS 46-1-1958 |
键和键槽及锥形销.键和键槽规范 |
Keys and keyways and taper pins - Specification - Keys and keyways |
| BS AU 149a-1980 |
牵引车与挂车之间的6V或12V电气设备的电气连接件规范:12N型(普通) |
Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 N (normal) |
| BS AU 177a-1980 |
带6V或12V电压的电气设备的牵引车和挂车之间电气连接器规范:12S型(补充) |
Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 S (supplementary) |
| BS 5380-1984 |
用O 型圈密封及G 系列紧固螺纹的液压系流入口及连接螺栓规范 |
Specification for hydraulic port and stud coupling using 'O'-ring sealing and 'G' series fastening threads |
| BS 3641-1-1971 |
机床符号.第1部分:通用符号 |
Symbols for machine tools - General symbols |
| BS 3712-2-1973 |
建筑施工用密封胶.第2部分:渗流、沾污性、收缩、储存期限和可涂性试验方法 |
Building and construction sealants - Methods of test for seepage, staining, shrinkage, shelf life and paintability |
| BS 3712-3-1974 |
建筑施工用密封胶.第3部分:使用寿命,结皮特性和粘性消失时间试验方法 |
Building and construction sealants - Methods of test for application life, skinning properties and tack-free time |
| BS 2866-1984 |
织物单位面积经纱与纬纱质量的测定方法 |
Methods for determination of the mass of warp and weft per unit area of fabric |
| BS 2889-1967 |
用杂质分析机测定纺纱用棉花废物含量和纺纱废物及纺纱用皮棉废弃物含量的方法 |
Method for the determination of trash content of cotton and for trash and lint content of waste intended for spinning, by the Shirley analyser |
| BS 3183-1968 |
用气流法测定羊毛纤维直径的方法 |
Method for the determination of wool fibre diameter by the airflow method |
| BS 1595-2-1984 |
工业用异丙醇.第2部分:试验方法 |
Propan-2-ol (isopropyl alcohol) for industrial use - Methods of test |
| BS 1998-1970 |
磷酸三苯酯规范 |
Specification for triphenyl phosphate |
| BS 1136-1972 |
低碳钢垃圾箱规范 |
Specification for mild steel refuse storage containers |
| BS 1296-4-1978 |
单刃刀具规范.第4部分:磨制高速钢刀片 |
Specification for single point cutting tools - Ground high speed steel tool bits |
| BS 749-1969 |
下部进料自动加煤机规范 |
Specification for underfeed stokers |
| BS 734-2-1959 |
用流体比重计测定奶的密度.第2部分:方法 |
Measurement of the density of milk using a hydrometer - Methods |
| BS 1050-1984 |
通讯设备用和类似用途的指示灯规范 |
Specification for indicator lamps for use in telecommunication apparatus and for allied purposes |
| BS 1296-3-1978 |
单刃刀具规范.第3部分:对焊刀具和坯件 |
Specification for single point cutting tools - Butt-welded cutting tools and blanks |
| BS 734-1-1973 |
用流体比重计测定奶的密度.第1部分:奶用流体比重计规范 |
Measurement of the density of milk using a hydrometer - Specification for hydrometers for use in milk |
| BS 5853-1980 |
医用小推车规范 |
Specification for medicine trolleys |
| CP 334-3-1971 |
城市燃气烹调和制冷器具选择安装和选择.制冷机 |
Selection and installation of town gas cooking and refrigerating appliances. Refrigerators |
| BS 5086-3-1984 |
黄油分析.第3部分:含水量测定方法(常规法) |
Analysis of butter - Method for determination of water content (routine method) |
| BS 4789-1972 |
电子管外壳用陶瓷部件规范 |
Specification for ceramic components for use in envelopes for electronic tubes |
| BS 5704-1979 |
数字电子直流电压表与直流电子模拟－数字直流转换器性能规定方法 |
Method for specifying the performance of digital electronic d.c. voltmeters and d.c. electronic analogue-to-digital convertors |
| BS 1170-1983 |
船用锅炉的水处理推荐标准 |
Recommendations for treatment of water for marine boilers |
| BS 3619-1976 |
活动输注液支架规范 |
Specification - Mobile infusion stands |
| BS 5507-1-1977 |
脚手架设备试验方法.第1部分:可调钢梁 |
Methods of test for falsework equipment - Floor centres |
| BS 4656-26-1980 |
机床精度及试验方法.第26部分:插齿机 |
Accuracy of machine tools and methods of test - Gear shaping machines |
| BS 857-1967 |
陆路运输用安全防碎玻璃规范 |
Specification for safety glass for land transport |
| BS AU 2a-1970 |
超重型半挂车用直径为3.5 - 4.5的第五轮大号销钉尺寸规范 |
Specification for dimensions of 31/2 - 41/2 in diameter fifth wheel king pin for use with extra heavy duty semi-trailers |
| BS AU 3-1970 |
拖拉机和半挂车的间隙尺寸和牵引座的位置规范 |
Specification for clearance dimensions and fifth wheel positions for tractors and semi-trailers |
| BS 957-2-1969 |
塞规规范.第2部分:米制单位 |
Specification for feeler gauges - Metric units |
| BS 959-1950 |
内径千分尺(包括杆式千分尺)规范 |
Specification for internal micrometers (including stick micrometers) |
| BS 5523-1977 |
纺织品术语.第1部分:织纹.通用术语与基本织纹定义 |
Glossary of terms for textiles - weaves - definitions of general terms and basic weaves |
| BS 3182-4-1978 |
纺织机械与附件.综片、综框与钢筘.第4部分:片式筘梁金属筘尺寸规范 |
Textile machinery and accessories: healds, heald frames and reeds - Specification for metal reeds with plate baulk: dimensions |
| BS 4993-9-1980 |
工业用氟化铝试验方法.第9部分:硫含量测定(x射线荧光光谱法) |
Methods of test for aluminium fluoride for industrial use - Determination of sulphur content (X-ray fluorescence spectrometric method) |
| BS 2782-10 Method 1005-1977 |
塑料的试验方法.第10部分:玻璃纤维增强塑料.试验方法1005:挠曲特性测定.三点法 |
Methods of testing plastics - Glass reinforced plastics - Determination of flexural properties - Three point method |
| BS 6319-2-1983 |
建筑用合成树脂胶料试验.第2部分:抗压强度测量方法 |
Testing of resin and polymer/cement compositions for use in construction - Method for measurement of compressive strength |
| BS 6319-5-1984 |
建筑用合成树脂胶料试验.第5部分:固化合成树脂成分密度测定方法 |
Testing of resin and polymer/cement compositions for use in construction - Methods for determination of density of hardened resin compositions |
| BS 2897-1970 |
电气用锻铝.带拉拔或轧制边的带材 |
Specification for wrought aluminium for electrical purposes - Strip with drawn or rolled edges |
| BS 1782-1951 |
消防软管接头除外的吸入软管和送水软管接头(1.5英寸至8英寸标称尺寸)规范 |
Specification for couplings for suction and delivery hose (11/2 in. to 8 in. nominal sizes) other than fire hose couplings |
| BS 3338-1966 |
锡及锡合金的取样及分析方法.第19部分:焊料及白合金轴承中锌的测定方法(光度测定法) |
Methods for the sampling and analysis of tin and tin alloys. Method for the determination of zinc in solders and white metal bearing alloys (photometric method) |
| BS 3338-20-1970 |
锡及锡合金取样及分析方法.第20部分:浇灌金属中镍含量测定方法(光度测定法) |
Methods for the sampling and analysis of tin and tin alloys - Method for the determination of nickel in capping metal (photometric method) |
| BS 5421-2-1978 |
弹性线试验方法.第2部分:聚氨酯弹性线 |
Methods of test for elastomeric threads - Polyurethane thread (elastane yarn) |
| BS 3338-18-1966 |
锡及锡合金取样及分析方法.第18部分:焊料及轴承用白合金中铝含量测定方法(光度测定法) |
Methods for the sampling and analysis of tin and tin alloys - Method for the determination of aluminium in solders and white metal bearing alloys (photometric method) |
| BS 1104-1957 |
通用梯形螺纹规范 |
Specification for general purpose Acme screw threads |
| BS EN 13363-2-2005 |
装有玻璃窗的遮阳设备.太阳能和光的透射率总量计算.详细的计算方法 |
Solar protection devices combined with glazing - Calculation of total solar energy transmittance and light transmittance - Detailed calculation method |
| BS EN 13508-2-2003 |
建筑物外部排水沟和下水道系统的条件.目视检查编码系统 |
Conditions of drain and sewer systems outside buildings - Visual inspection coding system |
| BS EN 14017-2005 |
农业和林业机械.固体粪肥播撒机.安全 |
Agricultural and forestry machinery - Solid fertilizer distributors - Safety |
| BS EN 14018-2005 |
农业和林业机械.条播机.安全 |
Agricultural and forestry machinery - Seed drills - Safety |
| BS EN 14529-2005 |
呼吸保护装置.逃生专用包含由需求阀控制的正压呼吸器的带半截面罩的自持式开路压缩气体呼吸机 |
Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only |
| BS EN 14881-2005 |
表面活性剂.烷基酰氨丙基甜菜碱中N-(3-二甲氨基丙基)-烷基酰氨含量的测定.气相色谱法 |
Surface active agents - Determination of N-(3-dimethylaminopropyl)-alkylamide content in alkylamidopropylbetaines - Gas chromatographic method |
| BS EN 1836-2005 |
个人眼睛防护设备.通用太阳镜、滤日光镜和直接观察太阳用滤光镜 |
Personal eye-equipment - Sunglasses and sunglare filters for general use and filters for direct observation of the sun |
| BS EN 2602-2005 |
航空航天系列.带锁环的螺纹适配器端口.几何构型 |
Aerospace series - Ports for adaptors, threaded, with lockring - Geometric configuration |
| BS EN 2603-2005 |
航空航天系列.带锁环的螺纹适配器端口端部.几何构型 |
Aerospace series - Port ends for adaptors, threaded, with lockring - Geometric configuration |
| BS 4678-2-1973 |
电缆管道.第2部分:钢制地板下管道规范 |
Cable trunking - Steel underfloor (duct) trunking |
| BS 5142-1974 |
标准电池规范 |
Specification for standard cells |
| BS 1728-15-1966 |
铝与铝合金的分析方法.第15部分:镍的测定(光度测量法) |
Methods for the analysis of aluminium and aluminium alloys - Determination of nickel (photometric method) |
| BS EN 2604-2005 |
航空航天系列.8 °30'带锁环的螺纹适配器接口.几何构型 |
Aerospace series - 8 ° 30' interface for adaptors, threaded, with lockring - Geometric configuration |
| BS EN 2605-2005 |
航空航天系列.24 °带锁环的螺纹适配器接口.几何构型 |
Aerospace series - 24 ° interface for adaptors, threaded, with lockring - Geometric configuration |
| BS EN 2713-003-2005 |
航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和200 °C之间.屏蔽式（螺旋式）和有护套的可印 |
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, ink jet printable - Product standard |
| BS 4929-1-1973 |
常作用扭矩式钢质六角螺母规范.第1部分:米制尺寸 |
Specification for steel hexagon prevailing-torque type nuts - Metric series |
| BS 5711-1979 |
甘油的取样与试验方法.第19部分:气味评定 |
Methods of sampling and test for glycerol. Assessment of odour |
| BS 2950-1958 |
电信与轻便电器用管状熔断片规范 |
Specification - Cartridge fuse-links for telecommunication and light electrical apparatus |
| BS 3036-1958 |
半封闭式熔断器(额定电流 100A及以下.接地电压240V)规范 |
Specification - Semi-enclosed electric fuses (ratings up to 100 amperes and 240 volts to earth) |
| BS 5806-1979 |
云母块、薄片、薄膜和碎片的厚度测量法 |
Method of measurement of thickness for mica blocks, thins, films and splittings |
| BS 842-1965 |
交流电压控制的接地保护断路器规范 |
Specification for a.c. voltage-operated earth-leakage circuit breakers |
| BS 5421-1-1976 |
弹性线试验方法.第1部分:橡胶线 |
Methods of test for elastomeric threads - Rubber threads |
| BS 3909-1965 |
辐射屏蔽用铅锭规范 |
Specification for ingot lead for radiation shielding |
| BS 4513-1969 |
辐射屏蔽用铅砖规范 |
Specification for lead bricks for radiation shielding |
| BS 3907-1-1965 |
镁和镁合金分析方法.第1部分:镁合金中铝含量测定(重量法) |
Methods for the analysis of magnesium and magnesium alloys - Determination of aluminium in magnesium alloys (gravimetric method) |
| BS 3907-2-1966 |
镁和镁合金分析方法.第2部分:铁含量测定(1:10-菲绕啉光度测量法) |
Methods for the analysis of magnesium and magnesium alloys - Determination of iron in magnesium and magnesium alloys (photometric - 1:10-phenanthroline method) |
| BS 3907-3-1966 |
镁和镁合金的分析方法.第3部分:镁和镁合金中铜含量的测定(光度测量法) |
Methods for the analysis of magnesium and magnesium alloys - Determination of copper in magnesium and magnesium alloys (photometric method) |
| BS 6070-0-1981 |
工业用碳酸钠取样及试验方法.第0部分:总则 |
Methods of sampling and test for sodium carbonate for industrial use - General introduction |
| BS 6070-1-1981 |
工业用碳酸钠取样及试验方法.第1部分:可溶性碱总含量的测定 |
Methods of sampling and test for sodium carbonate for industrial use - Determination of total soluble alkali content |
| BS 4579-2-1973 |
电缆和电线连接器机械和压合接头性能规范.第2部分:镍、铁及镀铜导线压合接头 |
Specification for performance of mechanical and compression joints in electric cable and wire connectors - Compression joints in nickel, iron and plated copper conductors |
| BS 1813-1974 |
导管模、板牙架与导架的尺寸规范 |
Specification for dimensions of conduit dies, diestocks and guides |
| BS 2618-1975 |
电力牵引装置规范 |
Specification for electric traction equipment |
| BS 4607-5-1982 |
电气装置用非金属导管及接头规范.第5部分:绝缘材料刚性导管、接头和元件规范 |
Non-metallic conduits and fittings for electrical installations - Specification for rigid conduits, fittings and components of insulating material |
| BS 5836-1980 |
计算机辅助测量和控制(CAMACA)指南.多格栅系统的组织规范:分类信息通路和CAMAC A1型格栅控制器规范 |
Guide to CAMAC: organization of multi-crate systems: specification of the Branch-highway and CAMAC crate controller Type A1 |
| BS 1728-16-1968 |
铝与铝合金的分析方法.第16部分:铬的测定(光度测量法) |
Methods for the analysis of aluminium and aluminium alloys - Determination of chromium (photometric method) |
| BS 1728-17-1968 |
铝与铝合金的分析方法.第17部分:铬的测定(容量法) |
Methods for the analysis of aluminium and aluminium alloys - Determination of chromium (volumetric method) |
| BS 5466-7-1982 |
金属镀层腐蚀试验方法.第7部分:静态室外腐蚀试验 |
Methods for corrosion testing of metallic coatings - Guidance on stationary outdoor exposure corrosion tests |
| BS 5772-3-1979 |
电子设备用机电元件规范.基本试验规程和测量方法.第3部分:载流量试验 |
Specification for electromechanical components for electronic equipment: basic testing procedures and measuring methods - Current-carrying capacity tests |
| BS AU 47-1965 |
表示暂时堵塞不能前进的三角形指示规范 |
Specification for advance warning triangle to indicate temporary obstructions |
| BS 5136-1981 |
牙膏规范 |
Specification for toothpastes |
| BS 5186-1975 |
轴心高度规范 |
Specification for shaft centre heights |
| BS 3908-13-1970 |
铅和铅合金取样与分析方法.第13部分:少量锑含量的测定(光度测量法) |
Methods for the sampling and analysis of lead and lead alloys - Antimony in lead and lead alloys (low contents) (photometric method) |
| BS 5654-1-1979 |
直流输出稳压电源.第1部分:术语定义 |
Stabilized power supplies, d.c. output - Terms and definitions |
| BS 1761-1951 |
履带式摩擦传动型单斗挖掘机规范 |
Specification for single bucket excavators of the crawler-mounted friction-driven type |
| BS 3338-3-1961 |
锡及锡合金取样及分析方法.第3部分:锡锭中锑含量测定方法(光度测定法) |
Methods for the sampling and analysis of tin and tin alloys - Method for the determination of antimony in ingot tin (photometric method) |
| BS 3338-4-1961 |
锡及锡合金取样及分析方法.第4部分:锡锭及锡铅焊料中铜的测定方法(光度测定法) |
Methods for the sampling and analysis of tin and tin alloys - Method for the determination of copper in ingot tin and tin-lead solders (photometric method) |
| BS 3907-8-1970 |
镁和镁合金分析方法.第8部分:镁合金中全部稀土族元素含量测定 |
Methods for the analysis of magnesium and magnesium alloys - Determination of total rare earths in magnesium alloys (gravimetric method) |
| G 200-1967 |
小型杠杆式手控开关规范 |
Specification for miniature lever-operated manual switches |
| BS 1344-13-1975 |
搪瓷层的试验方法.第13部分:铸铁测试覆层试样的制备 |
Methods of testing vitreous enamel finishes - Production of specimens for testing coatings on cast iron |
| BS 633-1970 |
电气用织边棉带和边带织物规范 |
Specification for cotton selvedge tapes and webbing for electrical purposes |
| BS 3338-5-1961 |
锡及锡合金取样及分析方法.第5部分:锡锭及锡锑焊料中铅含量测定方法(光度测定法) |
Methods for the sampling and analysis of tin and tin alloys - Method for the determination of lead in ingot tin and tin-antimony solders (photometric method) |
| BS 3338-6-1961 |
锡及锡合金取样及分析方法.第6部分:高纯度锡锭中铜的测定方法(光度测定法) |
Methods for the sampling and analysis of tin and tin alloys - Method for the determination of copper in high purity ingot tin (photometric method) |
| BS 3338-7-1961 |
锡及锡合金取样及分析方法.第7部分:焊料中银含量测定方法(硫氰酸铵容量法) |
Methods for the sampling and analysis of tin and tin alloys - Method for the determination of silver in solders (volumetric: ammonium thiocyanate method) |
| BS 3338-2-1961 |
锡及锡合金取样及分析方法.第2部分:锡锭中锡含量测定方法(铝还原法) |
Methods for the sampling and analysis of tin and tin alloys - Method for the determination of tin in ingot tin (aluminium reduction method) |
| BS 4368-4-1984 |
液压和通用压合管接头.第4部分:型号试验要求规范 |
Metallic tube connectors for fluid power and general use - Specification for type test requirements |
| BS 2782-10 Method 1006-1978 |
塑料试验方法.第10部分:玻璃纤维增强塑料.试验方法1006:合成树脂浸渍玻璃纤维织物中挥发物和树脂含量测定 |
Methods of testing plastics - Glass reinforced plastics - Determination of volatile matter and resin content of synthetic resin-impregnated textile glass fabric |
| BS 6070-2-1981 |
工业用碳酸钠取样及试验方法.第2部分:氯化物含量测定 |
Methods of sampling and test for sodium carbonate for industrial use - Determination of chloride content |
| BS 6070-3-1981 |
工业用碳酸钠取样及试验方法.第3部分:非挥发性物质测定 |
Methods of sampling and test for sodium carbonate for industrial use - Determination of non-volatile matter |
| BS 887-1982 |
精密游标卡尺规范 |
Specification for precision vernier callipers |
| BS 5414-1976 |
渔网网纱伸长度测定的试验方法 |
Method of test for determination of elongation of netting yarns for fishing nets |
| BS 4812-1972 |
日语罗马化拼写规范 |
Specification for the romanization of Japanese |
| BS 5444-1977 |
缩微复制准备推荐标准 |
Recommendations for preparation of copy for microcopying |
| BS 3907-9-1969 |
镁和镁合金分析方法.第9部分:镁合金中锌含量测定(乙二胺四醋酸离子置换容积测量法) |
Methods for the analysis of magnesium and magnesium alloys - Determination of zinc in magnesium alloys (ion-exchange-volumetric EDTA method) |
| BS 5472-1977 |
工业用低压开关及控制装置规范.端子标记与特性值.通则 |
Specification for low voltage switchgear and controlgear for industrial use - Terminal marking and distinctive number - General rules |
| BS 3907-11-1970 |
镁和镁合金分析方法.第11部分:硅含量测定(光度测量法) |
Methods for the analysis of magnesium and magnesium alloys - Determination of silicon in magnesium and magnesium alloys (photometric method) |
| BS 3907-12-1971 |
镁和镁合金分析方法.第12部分:铝含量测定(光度测量法) |
Methods for the analysis of magnesium and magnesium alloys - Determination of aluminium in magnesium and magnesium alloys (photometric method) |
| BS 3907-13-1972 |
镁和镁合金分析方法.第13部分:锡含量测定(光度测量法) |
Methods for the analysis of magnesium and magnesium alloys - Determination of tin in magnesium and magnesium alloys (photometric method) |
| BS 1370-1979 |
低热硅酸盐水泥规范 |
Specification for low heat Portland cement |
| BS 3908-6-1971 |
铅和铅合金取样与分析方法.第6部分:碲含量测定(光度测量法) |
Methods for the sampling and analysis of lead and lead alloys - Tellurium in lead and lead alloys (photometric method) |
| BS 5336-1976 |
高磁通密度变压器用铁氧体铁芯规范 |
Specification - Cores made of ferromagnetic oxides for use in high flux density transformers |
| BS 3907-15-1976 |
镁和镁合金分析方法.第15部分:铅含量测定(原子吸收法) |
Methods for the analysis of magnesium and magnesium alloys - Determination of lead in magnesium and magnesium alloys (atomic absorption method) |
| BS 3962-1-1980 |
木制家具漆面的试验方法.用85°角的镜面光泽测量做低角度眩光的评定 |
Methods of test for finishes for wooden furniture - Assessment of low angle glare by measurement of specular gloss at 85 ° |
| BS 4604-2-1970 |
结构钢制构件中高强度摩擦紧固螺栓应用规范,米制系列.第2部分:高级螺拴(标准杆) |
Specification for the use of high strength friction grip bolts in structural steelwork - Metric series - Higher grade (parallel shank) |
| BS 419-1966 |
电气用浸漆织物和织带规范 |
Specification for varnished fabrics and tapes for electrical purposes |
| BS 1717-1983 |
自行车和摩托车用钢管规范 |
Specification for steel tubes for cycle and motor cycle purposes |
| BS 4573-1970 |
两销可换向的插头和剃须刀输出插座规范 |
Specification for 2-pin reversible plugs and shaver socket-outlets |
| BS 546-1950 |
规范.两极和接地插针插头、插座和插座底壳 |
Specification - Two-pole and earthing-pin plugs, socket-outlets and socket-outlet adaptors |
| BS 6286-1982 |
钢表面淬火薄层的总厚度或实际厚度测量方法 |
Methods of measurement of total or effective thickness of thin surface-hardened layers in steel |
| BS 5581-1978 |
工业用低压开关设备和控制装置规范.专用控制开关接线端标记与识别号码 |
Specification for low voltage switchgear and controlgear for industrial use - Terminal marking and distinctive number for particular control switches |
| BS 5582-1978 |
工业用低压开关设备和控制装置规范.专用触点器辅助接点接线端标记与识别号码 |
Specification for low voltage switchgear and controlgear for industrial use - Terminal marking and distinctive number for auxiliary contacts of particular contactors |
| BS 5498-1977 |
手动切纸机安全规范 |
Specification for the safety of hand operated paper cutting machines |
| BS 105-1919 |
轻型和重型桥梁式铁路钢轨 |
Light and heavy bridge type railway rails |
| BS 1376-1974 |
灯光信号的颜色规范 |
Specification for colours of light signals |
| BS 3908-2-1967 |
铅和铅合金取样与分析方法.第2部分:砷含量测定(光度测量法) |
Methods for the sampling and analysis of lead and lead alloys - Arsenic in lead and lead alloys (photometric method) |
| BS 6043-1.3-1983 |
制铝工业用炭素材料取样与试验方法.第1部分:电极硬柏油脂.第3节:软化点测定(环、球法) |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of softening point (ring and ball method) |
| BS 5285-1975 |
非工业用交流电风扇及调节器性能规范 |
Specification - Performance of a.c. electric ventilating fans and regulators for non-industrial use |
| BS 5252F-1976 |
颜色配比扇 |
Colour matching fan |
| BS 4359-2-1982 |
粉末比表面积的测定.第2部分:推荐透气率法 |
Determination of the specific surface area of powders - Recommended air permeability methods |
| BS 3907-5-1966 |
镁和镁合金分析方法.第5部分:低锰含量测定(高碘酸盐光度测量法) |
Methods for the analysis of magnesium and magnesium alloys - Determination of manganese in magnesium and magnesium alloys (photometric-periodate method) (low contents) |
| BS 3907-6-1969 |
镁和镁合金分析方法.第6部分:锆含量测定(光度测量法) |
Methods for the analysis of magnesium and magnesium alloys - Determination of zirconium in magnesium and magnesium alloys (photometric method) |
| BS 6043-1.4-1981 |
制铝工业用炭素材料取样与试验方法.第1部分:电极硬柏油脂.第4节:甲苯不溶物质含量测定 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of content of toluene-insoluble material |
| BS 6043-1.5-1983 |
制铝工业用炭素材料取样与试验方法.第1部分:电极硬柏油脂.第5节:喹啉不溶物质含量测定 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of content of quinoline-insoluble material |
| BS 3988-1970 |
电气用锻铝规范.绝缘电缆用实芯导线 |
Specification for wrought aluminium for electrical purposes - Solid conductors for insulated cables |
| BS 1728-1-1951 |
铝与铝合金的分析方法.第1部分:铜的测定 |
Methods for the analysis of aluminium and aluminium alloys - Determination of copper |
| BS 1728-5-1953 |
铝与铝合金的分析方法.第5部分:铜的测定(吸收测量法) |
Methods for the analysis of aluminium and aluminium alloys - Determination of copper (absorptiometric method) |
| BS 3625-1963 |
粉末粒度测定用目镜和网格分度镜规范 |
Specification for eyepiece and screen graticules for the determination of the particle size of powders |
| BS 1453-1972 |
气焊填充材料规范 |
Specification for filler materials for gas welding |
| BS 215-2-1970 |
架空电力传输用铝线和钢芯铝线规范.第2部分:钢芯铝线 |
Specification for aluminium conductors and aluminium conductors, steel-reinforced for overhead power transmission - Aluminium conductors, steel-reinforced |
| BS 1728-6-1955 |
铝与铝合金的分析方法.第6部分:铁的测定(容量分析:氯化亚钛法) |
Methods for the analysis of aluminium and aluminium alloys - Determination of iron (volumetric: titanous chloride method) |
| BS 1728-8-1957 |
铝与铝合金的分析方法.第8部分:铁的测定(1:10菲咯啉吸收测量法) |
Methods for the analysis of aluminium and aluminium alloys - Determination of iron (absorptiometric 1:10-phenanthroline method) |
| BS 1728-9-1957 |
铝与铝合金的分析方法.第9部分:锰的测定(容量分析:亚砷酸盐/亚硝酸盐法) |
Methods for the analysis of aluminium and aluminium alloys - Determination of manganese (volumetric: arsenite/nitrite method) |
| BS 1728-10-1957 |
铝与铝合金的分析方法.第10部分:锰的测定(吸收测量法) |
Methods for the analysis of aluminium and aluminium alloys - Determination of manganese (absorptiometric method) |
| BS 1728-11-1960 |
铝与铝合金的分析方法.第11部分:硅的测定(过氯酸法) |
Methods for the analysis of aluminium and aluminium alloys - Determination of silicon (perchloric acid method) |
| BS 5000-50-1982 |
特种或专用旋转电机.第50部分:燃油器电动机尺寸 |
Specification for rotating electrical machines of particular types or for particular applications - Dimensions for oil burner motors |
| BS 714-1950 |
铁路信号电路用管状熔丝链规范 |
Specification - Cartridge fuse-links for use in railway-signalling circuits |
| BS 2011-2.1T-1981 |
环境试验.试验.试验T.钎焊 |
Environmental testing - Tests - Test T. Soldering |
| BS 1728-14-1965 |
铝与铝合金的分析方法.第14部分:镍的测定(重量法) |
Methods for the analysis of aluminium and aluminium alloys - Determination of nickel (gravimetric method) |
| BS 5654-4-1979 |
直流输出稳压电源.第4部分:除射频干扰外的检验 |
Stabilized power supplies, d.c. output - Tests other than radio-frequency interference |
| BS MA 29-1982 |
快艇用钢丝绳和多股绞合钢索规范 |
Specification for steel wire rope and strand for yachts |
| BS 1728-12-1961 |
铝与铝合金的分析方法.第12部分:硅的测定(钼蓝吸收测定法) |
Methods for the analysis of aluminium and aluminium alloys - Determination of silicon (absorptiometric molybdenum blue method) |
| BS 4996-1973 |
电源线载波通信系统用线路陷波器规范 |
Specification for line traps for power line carrier systems |
| BS 542-1973 |
矿井和采石场设备用电缆密封装置和密封盒规范 |
Specification for cable glands and sealing boxes for association with apparatus for use at mines and quarries |
| BS 1768-1963 |
统一精密六角头螺栓、螺钉和螺母(UNC与UNF螺纹)规范.标准系列 |
Specification for Unified precision hexagon bolts, screws, & nuts (UNC & UNF threads) - Normal series |
| BS 1344-18-1981 |
搪瓷层的试验方法.第18部分:流动特性的测定:熔化流动试验 |
Methods of testing vitreous enamel finishes - Determination of fluidity behaviour: fusion flow test |
| BS 3831-1964 |
家用器具和餐具搪瓷精加工规范 |
Specification for vitreous enamel finishes for domestic and catering appliances |
| BS 4495-1969 |
陶瓷和金属陶瓷度层的熔喷法推荐标准 |
Recommendations for the flame spraying of ceramic and cermet coatings |
| BS 3907-10-1969 |
镁和镁合金分析方法.第10部分:含稀土元素锆、钍和(或)银的镁合金中锰含量测定(光度测量法) |
Methods for the analysis of magnesium and magnesium alloys - Determination of manganese in magnesium alloys containing zirconium, rare earths, thorium and/or silver (photometric method) |
| BS 1748 Pts.1-5-1961 |
铜合金分析方法.第1部分至第5部分:铜合金中铜、铅、铁、铝和镍的测定方法 |
Methods for the analysis of copper alloys - Methods for the determination of copper, lead, iron, aluminium and nickel in copper alloys |
| BS 1090-1970 |
矿山用手持式电动钻机的防火规范 |
Specification for flameproof hand-held electric drilling machines primarily for use in mines |
| BS 2782-4 Method 434B-1977 |
塑料试验方法.第4部分:化学性能.试验方法434B:用氯仿萃取物紫外线吸收法测定聚烯烃混合料抗氧化剂 |
Methods of testing plastics - Chemical properties - Determination of antioxidants in polyolefin compounds by ultra-violet absorption of the chloroform extract |
| BS 5738-1980 |
天然生橡胶硫化特性评定试验方法 |
Methods of test for evaluation of vulcanization characteristics for raw natural rubbers |
| BS 2992-1970 |
当局机构和公共机关油漆工和装饰工用刷子(填料质量除外)规范 |
Specification for painters' and decorators' brushes for local authorities and public institutions (excluding quality of fillings) |
| BS 5378-2-1980 |
安全信号及颜色.第2部分:材料比色及光度特性规范 |
Safety signs and colours - Specification for colorimetric and photometric properties of materials |
| BS 4577-1970 |
电阻焊电极和辅助设备用材料规范 |
Specification for materials for resistance welding electrodes and ancillary equipment |
| BS E9007-1975 |
电子元器件质量评定协调体系规范.基本规范.按属性检验的取样计划及程序 |
Specification for harmonized system of quality assessment for electronic components: Basic specification: Sampling plans and procedures for inspection by attributes |
| BS 3382-7-1966 |
螺纹零部件电镀层规范.第7部分:螺纹零部件厚电镀层 |
Specification for electroplated coatings on threaded components - Thicker platings for threaded components |
| BS 4601-1970 |
塑料材料的镍铬电镀层规范 |
Specification for electroplated coatings of nickel plus chromium on plastics materials |
| BS EN 2267-010-2005 |
航空航天系列.一般用途电缆.工作温度-55℃～260℃.第010部分:DR族、单芯电缆紫外激光印字.产品标准 |
Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 010: DR family, single UV laser printable — Product standard |
| BS EN 2608-2005 |
航空航天系列.8°30'带锁环的螺纹适配器的安装和移除要求 |
Aerospace series - Installation and removal requirements for 8 ° 30' adaptors, threaded, with lockring |
| BS EN 2645-2005 |
航空航天系列.带锁环的螺纹适配器的锁环.尺寸 |
Lockrings for adaptors, threaded, with lockring — Dimensions |
| BS 5896-1980 |
预应力混凝土用高抗拉钢丝和绞合钢绳规范 |
Specification for high tensile steel wire and strand for the prestressing of concrete |
| BS 3900-F6-1976 |
涂料的试验方法.第F6集:涂料膜耐久性试验.第6部分:自然气候环境试验实施导则注释 |
Methods of test for paint - Durability tests on paint films - Notes for guidance on the conduct of natural weathering test |
| BS 2782-4 Method 452C-1979 |
塑料的试验方法.化学性能.低密度聚乙烯化合物中丁基橡胶含量的测定 |
Methods of testing plastics - Chemical properties - Determination of butyl rubber content of low density polyethylene compounds |
| BS 2782-4 Methods 452D to 452F-1978 |
塑料试验方法.第4部分:化学性能.聚烯烃混合物水萃取物pH值测定.聚烯烃混合物水可溶硫酸盐含量测定.聚烯烃混 |
Methods of testing plastics - Chemical properties - Determination of pH of water extract of polyolefin compound - Determination of water-soluble sulphates in polyolefin compound - Determination of water-soluble chlorides in polyolefin compound |
| BS 5626-3.1-1981 |
电工用纤维素纸.第3部分:各型材料规范.第1节:通用材料 |
Cellulosic papers for electrical purposes - Specifications for individual materials - General purpose paper |
| BS 5626-3.3-1982 |
电工用纤维素纸.第3部分:各型材料规范.第3节:皱纹纸 |
Cellulosic papers for electrical purposes - Specification for individual materials - Crepe paper |
| BS 4872-2-1976 |
不要求批准焊接工艺时焊工的鉴定考试规范.第2部分:铝及铝合金钨极惰性气体保护电弧焊或熔化极惰性气体保护 |
Specification for approval testing of welders when welding procedure approval is not required - TIG or MIG welding of aluminium and its alloys |
| BS 5252-1976 |
建筑用颜色协调构思框架 |
Framework for colour co-ordination for building purposes |
| BS 5954-2-1985 |
482.6mm(19in)系列机械结构尺寸.第2部分:框架结构机壳和高跨比规范 |
Dimensions of mechanical structures of the 482.6 mm (19 in) series - Specification for cabinets and pitches of rack structures |
| BS 1336-1971 |
节结清除规范 |
Specification for knotting |
| BS 6070-4-1981 |
工业用碳酸钠取样及试验方法.第4部分:水溶物质测定 |
Methods of sampling and test for sodium carbonate for industrial use - Determination of matter insoluble in water |
| BS 6070-7-1981 |
工业用碳酸钠取样及试验方法.第7部分:铜含量测定 |
Methods of sampling and test for sodium carbonate for industrial use - Determination of copper content |
| BS 4974-1975 |
铅酸电池用水规范 |
Specification for water for lead-acid batteries |
| BS 5564-1978 |
移相电力电容器外部保护的高压熔丝规范 |
Specification for high-voltage fuses for the external protection of shunt power capacitors |
| BS 3279-1960 |
虫胶规范 |
Specification for seedlac |
| BS EN 12126-2005 |
人生活用水的水处理用化学物质.液化氨 |
Chemicals used for treatment of water intended for human consumption — Liquefied ammonia |
| BS EN 12274-7-2005 |
泥浆表面修整.试验方法.振动磨擦试验 |
Slurry surfacing - Test methods - Shaking abrasion test |
| BS 6070-5-1981 |
工业用碳酸钠取样及试验方法.第5部分:硫酸盐含量测定 |
Methods of sampling and test for sodium carbonate for industrial use - Determination of sulphate content |
| BS EN 14363-2005 |
铁路设施.铁路车辆运行特性的验收试验.运行性能试验和稳定性试验 |
Railway applications — Testing for the acceptance of running characteristics of railway vehicles — Testing of running behaviour and stationary tests |
| BS EN 14391-2004 |
包装.可折叠铝管.触摸式危险警告 |
Packaging - Collapsible aluminium tubes - Tactile warnings of danger |
| BS EN 14849-2005 |
气溶胶容器.玻璃容器.气溶胶阀门金属箍尺寸 |
Aerosol containers — Glass containers — Dimensions of aerosol valve ferrules |
| BS EN 2266-003-2005 |
航空航天系列.通用电缆.操作温度为-55 °C 到 200 °C.喷墨可印刷.产品标准 |
Cables, electrical, for general purpose — Operating temperatures between -55 °C and 200 °C — Part 003: Ink jet printable — Product standard |
| BS 5164-1975 |
间接作用的电指示和记录仪表及其附件规范 |
Specification for indirect-acting electrical indicating and recording instruments and their accessories |
| BS 5694-1979 |
非线性电阻器的测量方法 |
Method for measurement of non-linearity in resistors |
| BS 5714-1979 |
金属材料电阻率的测量方法 |
Method of measurement of resistivity of metallic materials |
| BS 5788-1979 |
取样示波器性能的表示方法 |
Method for expression of the properties of sampling oscilloscopes |
| BS 6043-1.2-1981 |
制铝工业用炭素材料取样与试验方法.第1部分:电极硬柏油脂.第2节:水分测定(迪安 斯达克法) |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of water content (Dean and Stark method) |
| BS 4550-0-1978 |
水泥试验方法.第0部分:总则 |
Methods of testing cement - General introduction |
| BS 3338-16-1965 |
锡及锡合金取样及分析方法.第16部分:轴承用巴比合金中锡含量测定方法(镍带卷还原法) |
Methods for the sampling and analysis of tin and tin alloys - Method for the determination of tin in white metal bearing alloys (nickel coil reduction method) |
| BS 5805-1979 |
金云母碎片的热性分类方法 |
Method of thermal classification for phlogopite mica splittings |
| BS 5804-1979 |
白云母块、薄片及薄膜的目视分级法 |
Method of visual classification for muscovite mica blocks, thins and films |
| BS 2523-1966 |
铅基的底漆规范 |
Specification for lead-based priming paints |
| BS 1748-6-1960 |
铜合金分析方法.第6部分:铜合金中锡的测定方法(镍线圈还原法) |
Methods for the analysis of copper alloys - Method for the determination of tin in copper alloys (nickel coil reduction method) |
| BS 450-1958 |
机用螺钉与机用螺母(B.S.W和 B.S.F螺纹)规范 |
Specification for machine screws and machine screw nuts (B.S.W. & B.S.F. threads) |
| BS 768-1958 |
开槽平头螺钉规范 |
Specification for slotted grub screws |
| BS 856-1969 |
翼形螺母规范 |
Specification for wing nuts |
| BS 3241-1960 |
板材挤压用韧化聚苯乙烯规范 |
Specification for toughened polystyrene for sheet extrusion |
| BS 2919-1968 |
通用低密度和中密度聚乙烯棒材规范 |
Specification for low and intermediate density polythene rod for general purposes |
| BS 2754-1976 |
备忘录.防电击电气设备结构 |
Memorandum - Construction of electrical equipment for protection against electric shock |
| BS 6340-1-1983 |
淋浴装置.第1部分:私人住宅用淋浴设备及其部件选购指南 |
Shower units - Guide on choice of shower units and their components for use in private dwellings |
| BS 5689-2-1979 |
电工用漆布.第2部分:试验方法 |
Varnished fabrics for electrical purposes - Methods of test |
| BS 3507-1976 |
整牙线带及牙科用结扎线规范 |
Specification - Orthodontic wire and tape and dental ligature wire |
| BS 3520-1962 |
牙科用精制贵金属合金丝规范 |
Specification for dental wrought precious metal alloy wire |
| BS 5689-1-1979 |
电工用漆布.第1部分:定义和一般要求 |
Varnished fabrics for electrical purposes - Definitions and general requirements |
| BS 5650-1978 |
γ射线辐射仪规范 |
Specification for apparatus for gamma radiography |
| BS 2782-2 Method 241A-1984 |
塑料试验方法.第2部分 :电气性能.方法241A聚氯乙烯混合物对聚乙烯损耗角正切向影响测定 |
Methods of testing plastics - Electrical properties - Determination of effect of polyvinyl chloride compound on the loss tangent of polyethylene |
| BS 6435-1984 |
变压器与电抗线圈的高压电缆干燥端子用未充填护套规范 |
Specification for unfilled enclosures for the dry termination of HV cables for transformers and reactors |
| BS 5050-8-1980 |
冰晶石试验方法.第8部分:钙含量测定 |
Methods of test for cryolite - Determination of calcium content |
| BS 3727-7-1964 |
电子管和电子阀用镍的分析方法.第7部分:铁含量测定(光度测量法) |
Methods for the analysis of nickel for use in electronic tubes and valves - Determination of iron (photometric method) |
| BS 5655-8-1983 |
电梯与服务电梯.第8部分:电梯悬吊用有眼螺栓 |
Lifts and service lifts - Part 8: Specification for eyebolts for lift suspension |
| BS 3157-1960 |
运输机座椅用胶乳泡沫橡胶部件规范 |
Specification for latex foam rubber components for transport seating |
| BS 4550-3.1-1978 |
水泥试验方法.第3.1部分:物理试验.总则 |
Methods of testing cement - Physical tests - Introduction |
| BS 4550-3.4-1978 |
水泥的试验方法.第3部分:物理试验.第4节:强度试验 |
Methods of testing cement - Physical tests - Strength tests |
| BS 3338-9-1965 |
锡及锡合金取样及分析方法.第9部分:锡锭、焊料及轴承用巴比合金中砷含量测定方法(光度测定法) |
Methods for the sampling and analysis of tin and tin alloys - Method for the determination of arsenic in ingot tin, solders and white metal bearing alloys (photometric method) |
| BS 3338-10-1961 |
锡及锡合金取样及分析方法.第10部分:锡锭、锡铅焊料及轴承用巴比合金中铁含量测定方法(光度测定法) |
Methods for the sampling and analysis of tin and tin alloys - Method for the determination of iron in ingot tin, tin-lead solders and white metal bearing alloys (photometric method) |
| BS EN 12386-2005 |
人生活用水的水处理用化学物质.硫酸铜 |
Chemicals used for treatment of water intended for human consumption — Copper sulfate |
| BS EN 14124-2004 |
带内溢流口的冲洗水箱用进水阀 |
Inlet valves for flushing cisterns with internal overflow |
| BS 4568-1-1970 |
电气装置用ISO型米制螺纹钢导管及接头规范.第1部分:钢导管、弯头和接头 |
Specification for steel conduit and fittings with metric threads of ISO form for electrical installations - Steel conduit, bends and couplers |
| BS 5772-4-1979 |
电子设备用机电元件规范.基本试验规程和测量方法.第4部分:动态应力试验 |
Specification for electromechanical components for electronic equipment: basic testing procedures and measuring methods - Dynamic stress tests |
| BS 6340-2-1983 |
淋浴装置.第2部分:安装规范 |
Shower units - Specification for the installation of shower units |
| BS 2782-10 Method 1002-1977 |
塑料试验方法.第10部分:玻璃纤维增强塑料.试验方法1002:灼烧重量损失测定 |
Methods of testing plastics - Glass reinforced plastics - Determination of loss on ignition |
| BS 2782-10 Method 1003-1977 |
塑料试验方法.第10部分:玻璃纤维增强塑料.试验方法1003:拉伸性能测定 |
Methods of testing plastics - Glass reinforced plastics - Determination of tensile properties |
| BS 2782-10 Method 1004-1977 |
塑料试验方法.第10部分:玻璃纤维增强塑料.试验方法1004:调节和试验用标准大气压 |
Methods of testing plastics - Glass reinforced plastics - Standard atmospheres for conditioning and testing |
| BS 5338-1976 |
工程用锌合金压模铸件实用规程 |
Code of practice for zinc alloy pressure die casting for engineering |
| BS 456-1961 |
轨道电路绝缘体的尺寸规范 |
Specification for dimensions of track circuit insulation |
| BS 6338-1982 |
锌和镉电镀层的铬酸盐转化镀层规范 |
Specification for chromate conversion coatings on electroplated zinc and cadmium coatings |
| BS 1344-4-1968 |
搪瓷层的试验方法.第4部分:耐磨性 |
Methods of testing vitreous enamel finishes - Resistance to abrasion |
| BS 2656-1972 |
电镀用锌阳极、氧化锌和锌盐规范 |
Specification for zinc anodes, zinc oxide and zinc salts for electroplating |
| BS 5350-B9-1984 |
粘合剂试验方法.第B9部分:粘合剂.抗下垂测定(施用后流逸) |
Methods of test for adhesives - Adhesives - Determination of resistance to sagging (flow after application) |
| BS 5688-6-1979 |
工业用硼酸、氧化硼、四硼酸二钠、高硼酸钠与粗硼酸钠的试验方法.硼酸、氧化硼和四硼酸二钠中锰含量的测定 |
Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use - Determination of manganese content of boric acid, boric oxide and disodium tetraborate |
| BS 5688-7-1979 |
工业用硼酸、氧化硼、四硼酸二钠、高硼酸钠与粗硼酸钠的试验方法.硼酸、氧化硼和四硼酸二钠中铜含量的测定 |
Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use - Determination of copper content of boric acid, boric oxide and disodium tetraborates |
| BS 4071-1966 |
木材用聚乙酸乙烯酯乳化胶粘合剂规范 |
Specification for polyvinyl acetate (PVA) emulsion adhesives for wood |
| BS 1580-3-1965 |
统一螺纹规范.第3部分:直径小于1/4英寸 |
Specification for Unified screw threads - Diameters below 1/4 in |
| BS 5242-2-1983 |
液压气缸筒用管.第2部分:精镗有色金属管规范 |
Tubes for fluid power cylinder barrels - Specification for non-ferrous metallic tubes with specially finished bores |
| BS 3630-16-1976 |
锌和锌合金的取样与分析方法.第16部分:锌合金中镍含量(光度测量法) |
Methods for the sampling and analysis of zinc and zinc alloys - Nickel in zinc alloys (photometric method) |
| BS 3923-2-1972 |
焊接超声检验方法.第2部分:铁素体钢熔焊对接接头自动检验 |
Methods for ultrasonic examination of welds - Automatic examination of fusion welded butt joints in ferritic steels |
| BS 1728-18-1970 |
铝与铝合金的分析方法.第18部分:锌的测定(EDTA离子交换容量法或极谱法) |
Methods for the analysis of aluminium and aluminium alloys - Determination of zinc (ion-exchange-volumetric EDTA or polarographic method) |
| BS 1728-1971 |
铝与铝合金的分析方法.第19部分:镁的测定(原子吸收法) |
Methods for the analysis of aluminium and aluminium alloys. Determination of magnesium (atomic absorption method) |
| BS 1728-20-1971 |
铝与铝合金的分析方法.第20部分:铅的测定(原子吸收法) |
Methods for the analysis of aluminium and aluminium alloys - Determination of lead (atomic absorption method) |
| BS 1983-1-1969 |
机床与便携式电动工具用卡盘规范.刀具夹紧卡盘 |
Specification for chucks for machine tools and portable power tools - Tool-holding chucks |
| BS 3766-1979 |
机床用冷却液泵规范 |
Specification for coolant pumps for machine tools |
| BS 4585-8-1977 |
香料和调味品试验方法.第8部分:研磨细度等级测定－手工筛分法(比对法) |
Methods of test for spices and condiments - Determination of degree of fineness of grinding - hand sieving method (reference method) |
| BS 4024-1966 |
五氯苯基月桂酸规范 |
Specification for pentachlorophenyl laurate |
| BS 3265-1960 |
黑白消毒液中焦油酸的测定方法 |
Method for the determination of tar acids in black and white disinfectant fluids |
| BS 2621-5-1979 |
甘油规范 |
Specifications for glycerol |
| BS 4656-14-1983 |
机床精度及试验方法.第14部分:立式内拉床规范 |
Accuracy of machine tools and methods of test - Specification for broaching machines, vertical internal type |
| BS 978-1-1968 |
小节距齿轮规范.第1部分:渐开线直齿和斜齿齿轮 |
Specification for fine pitch gears - Involute spur and helical gears |
| PD CEN/TR 15253-2005 |
|
Health informatics — Quality of service requirements for health information interchange |
| BS 3664-1963 |
员工辐射监控用胶片剂量计规范 |
Specification for film badges for personnel radiation monitoring |
| BS 3783-1964 |
个人用防护X射线夹铅橡胶围裙规范 |
Specification for X-ray lead-rubber protective aprons for personal use |
| BS 6090-1981 |
人体照相辐射剂量计规范 |
Specification for personal photographic dosemeters |
| BS 1781-1981 |
亚麻和亚麻交织纺织品规范 |
Specification for linen and linen union textiles |
| BS AU 181-1982 |
可拆卸车体系统界面尺寸规范 |
Specification for interface dimensions for demountable vehicle body systems |
| BS 2858-1957 |
用于制造镀锌罐的钢板规范 |
Specification for steel plates for use in the manufacture of galvanizing pots |
| BS 4675-2-1978 |
旋转机械的机械振动.第2部分:振动强度测量仪器要求 |
Mechanical vibration in rotating machinery - Requirements for instruments for measuring vibration severity |
| BS 3745-1970 |
金属镀层的加速腐蚀试验结果的评定方法 |
Method for the evaluation of results of accelerated corrosion tests on metallic coatings |
| BS 4493-1969 |
电镀用铜盐规范 |
Specification for copper salts for electroplating |
| BS 6177-1982 |
建筑物隔震用合成橡胶座的选择与使用指南 |
Guide to selection and use of elastomeric bearings for vibration isolation of buildings |
| BS 3510-1968 |
表示电离辐射实际存在或可能存在的基本符号规范 |
Specification for a basic symbol to denote the actual or potential presence of ionizing radiation |
| BS 3730-2-1982 |
不圆度评定.第2部分:半径偏差测量记录仪特性规范(包括使用和校准导则) |
Assessment of departures from roundness - Specification for characteristics of stylus instruments for measuring variations in radius (including guidance on use and calibration) |
| BS 3730-3-1982 |
不圆度评定.第3部分:测定不圆度的二点三点测量法 |
Assessment of departures from roundness - Methods for determining departures from roundness using two- and three-point measurement |
| BS 6092-3-1981 |
工业用硅酸钠和硅酸钾取样和试验方法.第3部分:二氧化硅含量测定(称重法) |
Methods of sampling and test for sodium and potassium silicates for industrial use - Determination of silica content (gravimetric method) |
| BS 5578-2-1978 |
建筑结构.梯.第2部分:模数协调:梯和梯口协调尺寸规范 |
Building construction - stairs - Modular co-ordination: specification for co-ordinating dimensions for stairs and stair openings |
| BS 182-1972 |
电话和电报用镀锌电线规范 |
Specification for galvanized line-wire for telephone and telegraph purposes |
| BS 1748-7-1960 |
铜合金分析方法.第7部分:铜合金中硅的测定方法(光度测量法) |
Methods for the analysis of copper alloys - Method for the determination of silicon in copper alloys (photometric method) |
| BS 6092-4-1981 |
工业用硅酸钠和硅酸钾取样和试验方法.第4部分:碳酸盐含量测定 |
Methods of sampling and test for sodium and potassium silicates for industrial use - Determination of carbonate content |
| BS 6092-5-1981 |
工业用硅酸钠和硅酸钾的取样和试验方法.第5部分:碱总含量测定 |
Methods of sampling and test for sodium and potassium silicates for industrial use - Determination of total alkali content |
| BS 6092-6-1981 |
工业用硅酸钠和硅酸钾取样和试验方法.第6部分:难溶产品溶液制备和水不溶物测定 |
Methods of sampling and test for sodium and potassium silicates for industrial use - Preparation of solutions of not readily soluble products and determination of matter insoluble in water |
| BS 6092-7-1981 |
工业用硅酸钠和硅酸钾取样和试验方法.第7部分:二氧化硅含量测定(滴定法) |
Methods of sampling and test for sodium and potassium silicates for industrial use - Determination of silica content (titrimetric method) |
| BS 4505-7-1976 |
数字数据传输.基本型控制规程.信息性会话信息的传输 |
Digital data transmission - Basic mode control procedures; conversational information message transer |
| BS AU 25-1964 |
总重5-14吨的挂车和牵引车的牵引钩规范 |
Specification for towing hook for use between trailers of 5-14 tons gross weight and towing vehicle |
| BS AU 26-1964 |
总重5-16吨的挂车和牵引车的牵引爪规范 |
Specification for towing jaw for use between trailers of 5-16 tons gross weight and towing vehicle |
| BS 4672-2-1971 |
包装件运输和储存危害指南.第2部分:气候性危害(地图与图表) |
Guide to hazards in the transport and storage of packages - Climatic hazards (maps and diagrams) |
| BS 2741-1969 |
简易烟雾观察器结构推荐规范 |
Recommendations for the construction of simple smoke viewers |
| BS 5058-1973 |
织物悬垂性评定方法 |
Method for the assessment of drape of fabrics |
| BS 2846-2-1981 |
统计数据说明指南.第2部分:均值估计.置信度 |
Guide to statistical interpretation of data - Estimation of the mean: confidence interval |
| BS 5898-1980 |
实验室用容量玻璃器皿的设计及制作原理规范 |
Specification for principles of design and construction of volumetric glassware for laboratory use |
| BS 6392-0-1983 |
工业用乙醇试验.第0部分:一般导言 |
Testing of ethanol for industrial use - General introduction |
| BS 5986-1980 |
热输入功率为60kW到2MW的燃气对流式加热器的电安全性和性能规范 |
Specification for electrical safety and performance of gas fired space heating appliances with inputs 60 kW to 2 MW |
| BS 4602-1977 |
玻璃容器及精度公制单位规格使用规范 |
Specification for the use of metric units in specifications for glass containers and finishes |
| BS 6117-1981 |
淡匍萄酒用玻璃瓶规范 |
Specification for glass bottles for light wine |
| BS 6118-1981 |
重复使用的啤酒和苹果酒玻璃酒瓶规范 |
Specification for multi-trip glass bottles for beer and cider |
| BS 442-1950 |
铁路信号用电气装置的接线端规范 |
Specification for terminals for electrical apparatus for railway signalling purposes |
| BS 2051-1-1973 |
工程用管与管接头规范.第1部分:工程用铜与铜合金毛细管与耐压管接头 |
Tube and pipe fittings for engineering purposes - Copper and copper alloys capillary and compression tube fittings for engineering purposes |
| BS 2782-3 Methods 320A to 320F-1976 |
塑料的试验方法.第3部分:机械性能.试验方法320A-320F:抗拉强度、伸长值和弹性模量 |
Methods of testing plastics - Mechanical properties - Tensile strength, elongation and elastic modulus |
| BS 1906-1952 |
(标称尺寸1/8英寸-1/4英寸）软管接头(露天和水中使用)规范 |
Specification for hose couplings (air and water) (1/8 in. to 11/4 in. nominal sizes) |
| BS 6129-1-1981 |
压力系统用波纹管膨胀节选用惯例.第1部分:金属波纹管膨胀节 |
Code of practice for the selection and application of bellows expansion joints for use in pressure systems - Metallic bellows expansion joints |
| BS EN 12120-2005 |
用于人类消耗的饮用水处理化学药品.亚硫酸氢钠 |
Chemicals used for treatment of water intended for human consumption — Sodium hydrogen sulfite |
| BS 4799-1-1972 |
漆粘玻璃丝包覆铜线规范.第1部分:圆导线 |
Specification for varnish-bonded glass-lapped copper conductors - Round wire |
| BS 183-1972 |
一般用镀锌钢丝多股绞合线规范 |
Specification for general purpose galvanized steel wire strand |
| BS 4801-2-1972 |
漆粘玻璃丝包覆铜线规范.第2部分:矩形导线 |
Specification for varnish-bonded glass-braided copper conductors - Rectangular conductors |
| BS 4927-1-1974 |
纸、棉、丝或人造丝包覆铜线规范.第1部分:圆导线 |
Specification for paper-, cotton-, silk- or rayon-covered copper conductors - Round wire |
| BS 6137-1982 |
锡铅合金电镀层规范 |
Specification for electroplated coatings of tin/lead alloys |
| BS 6319-6-1984 |
建筑用合成树脂胶料试验.第6部分:压缩弹性模数测定方法 |
Testing of resin and polymer/cement compositions for use in construction - Method for determination of modulus of elasticity in compression |
| BS 6319-8-1984 |
建筑用合成树脂胶料试验.第8部分:耐液体性评定方法 |
Testing of resin and polymer/cement compositions for use in construction - Method for the assessment of resistance to liquids |
| DD 88-1983 |
土木工程用不流动树脂成分坩埚寿命评定方法 |
Method for the assessment of pot life of non-flowing resin compositions for use in civil engineering |
| BS 1591-1975 |
耐蚀高硅铸铁件规范 |
Specification for corrosion resisting high silicon iron castings |
| BS 2780-1983 |
皮革术语词汇 |
Glossary of leather terms |
| BS 4569-1983 |
起绒织物及表面植绒织物的可燃性(表面闪光)试验方法 |
Method of test for ignitability (surface flash) of pile fabrics and assemblies having pile on the surface |
| BS 5835-1-1980 |
集料试验推荐标准.第1部分:集料压实性分级实验 |
Recommendations for testing of aggregates - Compactibility test for graded aggregates |
| BS 869-1978 |
工具制造操作平台和高精度划线平台规范 |
Specification for toolmakers' flats and high precision surface plates |
| BS 5204-1-1975 |
直尺规范.第1部分:铸铁直尺(弓形和I型剖面) |
Specification for straightedges - Cast iron straightedges (bow shaped and I-section) |
| BS 5655-7-1983 |
电梯与服务电梯.第7部分:手控装置、显示器和附件规范 |
Lifts and service lifts - Specification for manual control devices, indicators and additional fittings |
| BS 3999-4-1967 |
家用电器性能测量方法.第4部分:电烘衣箱及支架 |
Methods of measuring the performance of household electrical appliances - Electric clothes drying cabinets and racks |
| BS 6182-2-1982 |
煤矿用固有安全电源.第2部分:交流电源规范 |
Intrinsically safe power supplies for use in coal mines - Specification for a.c. power supplies |
| BS 6182-3-1982 |
煤矿用固有安全电源.第3部分:第3部分:可反复充电蓄电池组规范 |
Intrinsically safe power supplies for use in coal mines - Specification for rechargeable battery units |
| BS 5046-1974 |
钢热处理的等效直径评估方法 |
Method for the estimation of equivalent diameters in the heat treatment of steel |
| BS EN 2267-002-2005 |
航空航天系列.一般用途电缆.工作温度-55℃～260℃.第002部分:总则 |
Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 002: General |
| BS 5952-1980 |
电子设备用白云母元件规范 |
Specification for muscovite mica components for electronic equipment |
| BS 5961-1980 |
电绝缘用塑料薄膜及薄片摩擦系数测定方法 |
Method for determination of coefficients of friction of plastic film and sheeting for use as electrical insulation |
| BS 903-C2-1982 |
橡胶的物理试验.体积电阻系数的测定 |
Physical testing of rubber - Determination of volume resistivity |
| BS 5626-3.4-1980 |
电工用纤维素纸.第3部分:各型材料规范.第4节:电解电容器纸 |
Cellulosic papers for electrical purposes - Specifications for individual materials - Electrolytic capacitor paper |
| BS 1748-8-1960 |
铜合金分析方法.第8部分:铜合金中磷的测定方法(光度测量法） |
Methods for the analysis of copper alloys - Method for the determination of phosphorus in copper alloys (photometric method) |
| BS 2782-5 Method 542A-1979 |
塑料试验方法.第5部分:光学和颜色特性.试验方法542A:颜料渗色的定性评定 |
Methods of testing plastics. Optical and colour properties. Qualitative evaluation of bleeding of colorants |
| BS 1979-1985 |
精神病院用病房床架规范 |
Specification for hospital ward bedsteads for psychiatric hospitals |
| BS 5101-4-1980 |
带控制互换性和安全性量规的灯头和灯座规范.第4部分:第1、2或第3部分中未作规定的英国用灯头、灯座和量规 |
Specification for lamp caps and holders together with gauges for the control of interchangeability and safety - Lamp caps, lampholders and gauges used in the United Kingdom but not specified in Parts 1, 2 or 3 |
| BS EN 12121-2005 |
用于人类消耗的饮用水处理化学药品.亚硫酸钠 |
Chemicals used for treatment of water intended for human consumption — Sodium disulfite |
| BS 5528-1981 |
运土用挖掘机驾驶员的控制设备规范 |
Specification for operator's controls on excavators used for earth-moving |
| BS 4656-10-1975 |
机床精度及试验方法.第10部分:摇臂钻床 |
Specification for the accuracy of machine tools and methods of test - Drilling machines, radial type |
| BS 807-1955 |
点焊电极的规范 |
Specification for spot welding electrodes |
| BS 4656-12-1979 |
机床精度及试验方法.第12部分:分度头 |
Specification for the accuracy of machine tools and methods of test - Dividing heads |
| BS 2782-1 Method 140E-1982 |
塑料试验方法.热性能.小型倾钭试片置于酒精火焰上的可燃性(实验室法) |
Methods of testing plastics - Thermal properties - Flammability of a small, inclined test piece exposed to an alcohol flame (laboratory method) |
| BS 4656-11-1974 |
机床精度及试验方法.第11部分:落地圆柱立式钻床 |
Accuracy of machine tools and methods of test - Drilling machines , vertical floor mounted column and pillar types |
| BS 31-1940 |
电气布线用钢导线管和管接头 |
Specification - Steel conduit and fittings for electrical wiring |
| BS EN 2267-003-2005 |
航空系列.一般用途的电缆,电器.-55 °C和260 °C之间的操作温度.喷墨可打印.产品标准 |
Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C— Part 003: Inkjet printable — Product standard |
| BS EN 2267-007-2005 |
航空系列.一般用途的电缆,电器.-55°C和260°C之间的操作温度.DMA族、单个可打印紫外激光和多芯附件.产品标 |
Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 007: DMA family, single ink-jet printable and multicore assembly — Product standard |
| BS 1489-1972 |
电工用包覆绕组线的包装规范 |
Specification for the packaging of covered winding wires for electrical purposes |
| BS 2565-1972 |
电气用包覆绕组线线盘与绝缘带绕带盘规范 |
Specification for drums for covered winding wires and strips for electrical purposes |
| BS 5909-1980 |
无氧铜锈垢粘着力试验方法 |
Method for scale adhesion test for oxygen-free copper |
| BS 5350-C14-1979 |
粘合剂的试验方法.第C14部分:粘结部位:机械试验.刚性对刚性组件的90度剥离试验 |
Methods of test for adhesives - Adhesively bonded joints: mechanical tests - 90 ° peel test for a rigid-to-rigid assembly |
| BS 4542-1970 |
薄型电绝缘材料损耗角正切值和介电常数的测定方法(楞氏法) |
Method for determination of loss tangent and permittivity of electrical insulating materials in sheet form (Lynch method) |
| BS 4653-2-1970 |
纸包铜线规范.第2部分:矩形导线 |
Specification for paper covered copper conductors - Rectangular conductors |
| BS 5649-5-1982 |
路灯杆规范.第5部分:电气接头底座与电线敷设槽规范 |
Lighting columns - Specification for base compartments and cableways |
| BS EN 14339-2005 |
地下消防栓 |
Underground fire hydrants |
| BS 5590-1978 |
米制螺纹系列量筒规范 |
Specification for screw thread metric series measuring cylinders |
| BS 1739-1982 |
过滤量瓶规范 |
Specification for filter flasks |
| BS 4737-3.5-1978 |
擅入者报警系统.第3部分:元部件规范.第5节:超声波活动探测器 |
Intruder alarm systems - Specifications for components - Ultrasonic movement detectors |
| BS 5671-1979 |
水轮机交付使用、操作与维修指南 |
Guide for commissioning, operation and maintenance of hydraulic turbines |
| BS 5409-1-1976 |
尼龙管规范.第1部分:主要用于气动装置的11型及12型全增塑尼龙管 |
Specification for nylon tubing - Fully plasticized nylon tubing types 11 and 12 for use primarily in pneumatic installations |
| BS 5772-6-1984 |
电子设备用机电元件规范.基本试验规程和测量方法.第6部分:气候试验和钎焊试验 |
Specification for electromechanical components for electronic equipment: basic testing procedures and measuring methods - Climatic tests and soldering tests |
| BS 4993-10-1983 |
工业用氟化铝试验方法.第10部分:磷含量测定 |
Methods of test for aluminium fluoride for industrial use - Determination of phosphorus content |
| BS 5050-1974 |
冰晶石的试验方法 |
Methods of test for cryolite |
| BS EN 12122-2005 |
人生活用水的水处理用化学物质.氨溶液 |
Chemicals used for treatment of water intended for human consumption — Ammonia solution |
| BS EN 12124-2005 |
人生活用水的水处理用化学物质.亚硫酸钠 |
Chemicals used for treatment of water intended for human consumption — Sodium sulfite |
| BS EN 12125-2005 |
人生活用水的水处理用化学物质.硫代硫酸钠 |
Chemicals used for treatment of water intended for human consumption — Sodium thiosulfate |
| BS 2011-2.2Kd-1984 |
环境试验.导则.试验Kd、试验Kd的导则:接触点与连接件的硫化氢试验 |
Environmental testing - Guidance - Test Kd - Guidance on Test Kd: Hydrogen sulphide test for contacts and connections |
| BS 5710-1979 |
锻钢中非金属夹杂物含量的宏观评定方法 |
Methods for macroscopic assessment of the content of non-metallic inclusions in wrought steels |
| BS 5711-2-1979 |
甘油取样与试验方法.第2部分:取样方法 |
Methods of sampling and test for glycerol - Methods of sampling |
| BS 2598-4-1980 |
玻璃器皿、管道与接头.第4部分:玻璃器皿零件规范 |
Glass plant, pipeline and fittings - Specification for glass plant components |
| BS 6156-1981 |
采用氟化处理过的碳氢聚合物绝缘的低频微型设备用单芯或多芯单股线规范 |
Specification for low-frequency miniature equipment wires with solid or stranded conductor, fluorinated polyhydrocarbon type insulation, single |
| BS 5813-1979 |
脉冲发生器性能表示指南 |
Guide for expression of the performance of pulse generators |
| BS 3518-2-1962 |
疲劳试验方法.第2部分:回转弯曲疲劳试验 |
Methods of fatigue testing - Rotating bending fatigue tests |
| BS 3518-3-1963 |
疲劳试验方法.第3部分:直接应力疲劳试验 |
Methods of fatigue testing - Direct stress fatigue tests |
| BS EN 2267-008-2005 |
航空系列.一般用途的电缆,电器.-55°C和260°C之间的操作温度.DM族、单个可打印紫外激光和多芯附件.产品标 |
Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 008: DM family, single UV laser printable and multicore assembly — Product standard |
| BS 4430-2-1969 |
工业机动车辆安全性推荐标准.第2部分:操作和维护 |
Recommendations for the safety of powered industrial trucks - Operation and maintenance |
| BS 3338-8-1961 |
锡及锡合金取样及分析方法.第8部分:锡锭、锡铅焊料及轴承用巴比合金中铋含量测定方法(光度测定法) |
Methods for the sampling and analysis of tin and tin alloys - Method for the determination of bismuth in ingot tin, tin-lead solders and white metal bearing alloys (photometric method) |
| BS 4140-22-1980 |
氧化铝试验方法.第22部分:锰含量的测定 |
Methods of test for aluminium oxide - Determination of manganese content |
| BS 5346-1976 |
ISO 米制梯形螺纹规范 |
Specification - ISO metric trapezoidal screw threads |
| BS 4993-7-1980 |
工业用氟化铝试验方法.第7部分:钠含量测定 |
Methods of test for aluminium fluoride for industrial use - Determination of sodium content |
| BS 4993-8-1980 |
工业用氟化铝试验方法.第8部分:硫酸盐含量测定 |
Methods of test for aluminium fluoride for industrial use - Determination of sulphate content |
| BS 5688-14-1979 |
工业用硼酸、氧化硼、四硼酸二钠、高硼酸钠与粗硼酸钠的试验方法.硼酸、氧化硼和四硼酸二钠中铬含量的测定 |
Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use - Determination of chromium content of boric acid, boric oxide and disodium tetraborates |
| BS 5688-15-1979 |
工业用硼酸、氧化硼、四硼酸二钠、高硼酸钠与粗硼酸钠的试验方法.四硼酸二钠和粗硼酸钠中水含量的测定 |
Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use - Determination of water content of disodium tetraborates and crude sodium borates |
| BS 5667-18-1979 |
连续式机械装卸设备规范.安全性要求.第18部分:链节式输送机与升降机-啮合点保护示例 |
Specification for continuous mechanical handling equipment - safety requirements - Conveyors and elevators with chain-elements - examples for guarding of nip points |
| BS 5667-1980 |
连续式机械装卸设备规范.安全要求.第19部分:带式输送机-啮合点保护示例 |
Specification for continuous mechanical handling equipment - safety requirements. Belt conveyors - examples for guarding of nip points |
| BS 5777-1979 |
托盘码垛机和高升程平台货车稳定性验证试验方法 |
Methods of test for verification of stability of pallet stackers and high lift platform trucks |
| BS 4521-3.2-1975 |
私营铁路道岔规范.第3部分:英国铁路机车不运行的、轴负荷不超过25吨的中型道岔.第2节:平底钢轨道岔 |
Specification for railway turnouts for private users - Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons - Turnouts using flat bottom rails |
| BS 4521-4-1975 |
私营铁路道岔规范.第4部分:英国铁路机车不运行的、轴负荷可超过25吨的重型平底钢轨岔道 |
Specification for railway turnouts for private users - Heavy grade turnouts over which British Railways locomotives do not operate, for axle loads which may exceed 25 tons, using flat bottom rails |
| BS 5727-1979 |
地面上听到的飞机噪音的描述方法 |
Method for describing aircraft noise heard on the ground |
| BS 6086-1981 |
汽车内噪声的测量方法 |
Method of measurement of noise inside motor vehicles |
| BS 2742C-1957 |
林格曼煤烟浓度表 |
Ringelmann chart |
| DD CEN/TS 15224-2005 |
|
Health services — Quality management systems — Guide for the use of EN ISO 9001:2000 |
| BS 6748-1986 |
陶瓷制品、玻璃器皿、玻璃陶瓷制品和搪瓷制品金属析出极限规范 |
Specification for limits of metal release from ceramic ware, glassware, glass ceramic ware and vitreous enamel ware |
| BS 3618-5-1971 |
采掘术语.第5部分:地质学 |
Glossary of mining terms - Geology |
| BS 185-6-1970 |
航空和航天术语词汇.第6节:弹道导弹和制导导弹 |
Glossary of aeronautical and astronautical terms - Ballistic and guided missiles |
| BS 185-7-1969 |
航空和航天术语词汇.第7节:轻于空气的飞行器(高空气球) |
Glossary of aeronautical and astronautical terms - Lighter-than-air aircraft (aerostats) |
| BS 185-8-1970 |
航空和航天术语词汇.第8节:动力装置 |
Glossary of aeronautical and astronautical terms - Power plant |
| BS 185-9-1970 |
.航空和航天术语词汇.第9节:螺旋浆 |
Glossary of aeronautical and astronautical terms - Propellers |
| BS 185-10-1970 |
航空和航天术语词汇.第10节:辅助设施 |
Glossary of aeronautical and astronautical terms - Auxiliary services |
| BS 5860-1980 |
水轮机、蓄水泵及涡轮泵的效率测定方法(热力学法) |
Method for measuring the efficiency of hydraulic turbines, storage pumps and pump-turbines (thermodynamic method) |
| BS 1743-1-1986 |
奶粉和奶粉制品的分析方法.第1部分:一般介绍(包括实验样品的制备) |
Methods for analysis of dried milk and dried milk products - General introduction, including preparation of laboratory samples |
| BS 4727 Pt.2 Group 08-1986 |
电工、电力、电信、电子学、照明和颜色术语词汇.第2部分:电力工程专用术语.第08集:电缆术语 |
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering. Electric cable terminology |
| BS 5586-1-1978 |
感观分析装置.第1部分:品酒用玻璃杯 |
Sensory analysis apparatus - Specification for wine-tasting glass |
| BS 9300 C582-584-1971 |
反向锁闭可控硅三极管详细规范 |
Detail specifications for reverse blocking triode thyristors |
| BS 6319-10-1987 |
建筑用合成树脂胶料试验..第10部分:挠曲应力作用下反射温度测量方法 |
Testing of resin and polymer/cement compositions for use in construction - Method for measurement of temperature of deflection under a bending stress |
| BS 1125-1987 |
厕所冲洗水箱(包括两用冲洗水箱与冲洗管)规范 |
Specification for WC flushing cisterns (including dual flush cisterns and flush pipes) |
| BS 4267-0-1987 |
硝酸铵.第0部分:总则 |
Ammonium nitrate - General introduction |
| BS 4361-26-1990 |
木工机械.第26部分:带锯锯片刃磨机命名 |
Woodworking machines - Nomenclature for bandsaw blade sharpening machines |
| BS 6132-1983 |
碱性可充电电池和蓄电池的安全操作实用规程 |
Code of practice for safe operation of alkaline secondary cells and batteries |
| BS 5561-1979 |
铜线卷轴规范 |
Specification for spools for copper wire |
| BS 88-5-1988 |
1000V(含1000V)以上的交流电压和1500V(含1500V)以上的直流电压保险丝管.第5部分:交流供电网用熔断体的补充 |
Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification of supplementary requirements for fuse-links for use in a.c. electricity supply networks |
| BS 9364 N007 and N009-1978 |
小功率硅N-P-N型开关晶体管详细规范.20V、平面外延、额定环境条件、密封封装.全面附加评定级 |
Detail specification for low power silicon n-p-n switching transistors - 20 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level |
| BS 5268-4.2-1990 |
建筑用木材.第4部分:木结构耐火性.第2节:木螺栓墙和格栅地板结构耐火性计算推荐标准 |
Structural use of timber - Fire resistance of timber structures - Recommendations for calculating fire resistance of timber stud walls and joisted floor constructions |
| BS 4193-16-1986 |
镶硬质合金刀具.第16部分:可转位刀片用柄式铣刀命名规范 |
Hardmetal insert tooling - Specification for designation of shank type milling cutters for indexable inserts |
| BS 4140-11-1986 |
氧化铝试验方法.第11部分:钠含量测定 |
Methods of test for aluminium oxide - Determination of sodium content |
| BS 373-1957 |
无节疤小木材样品的试验方法 |
Methods of testing small clear specimens of timber |
| BS 5268-4.1-1978 |
建筑木材.第4部分:木结构耐火性.第1节:木构件耐火性计算推荐标准 |
Structural use of timber - Fire resistance of timber structures - Recommendations for calculating fire resistance of timber members |
| BS 229-1957 |
电气设备防火罩规范 |
Specification. Flameproof enclosure of electrical apparatus |
| BS EN 2267-009-2005 |
航空航天系列.一般用途电缆.工作温度-55℃～260℃.第009部分:DRA族、单芯和多芯电缆.产品标准 |
Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 009: DRA family, single and multicore assembly — Product standard |
| BS 2782-4 Method 433A-1979 |
塑料试验方法.第4部分:化学性能.试验方法433A:环氧树脂与缩水甘油脂无机氯测定 |
Methods of testing plastics - Chemical properties - Determination of inorganic chlorine in epoxide resins and glycidyl esters |
| BS 1745-1951 |
铁路信号用交流继电器规范.拨轨继电器(双元件、二位)、线路继电器(单元件、二位) |
Specification for alternating-current relays for railway signalling: track relays (double-element, 2-position), line relays (single-element, 2-position) |
| BS 4258-7-1978 |
工业用磷酸(正磷酸)试验方法.第7部分:全氧化磷(V)含量测定:磷钼酸喹啉重量法 |
Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of total phosphorus (V) oxide content: quinoline phosphomolybdate gravimetric method |
| BS 4258-10-1978 |
工业用磷酸(正磷酸)试验方法.第10部分:氮氧化物含量测定 |
Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of oxides of nitrogen content |
| BS 5504-1-1977 |
壁装式抽水马桶.第1部分:与水箱联体的壁装抽水马桶.连接尺寸 |
Wall hung WC pan - Wall hung WC pan with close coupled cistern - Connecting dimensions |
| BS 5823-1979 |
绝缘材料升温度电阻和电阻率测试方法 |
Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures |
| BS 673-1984 |
气动工具柄杆和夹盘套筒配合尺寸规范 |
Specification for shanks for pneumatic tools and fitting dimensions of chuck bushings |
| BS 871-1981 |
砂纸和砂布规范 |
Specification for abrasive papers and cloths |
| BS 5109-1974 |
光学器件和系统性能评定用术语词汇 |
Glossary of terms used in assessing the performance of optical devices and systems |
| DD CEN/TS 15296-2006 |
|
Solid Biofuels — Calculation of analyses to different bases |
| BS 5350-E1-1976 |
粘合剂试验方法.第E1部分:试验数据取样和分析.统计分析指南 |
Methods of test for adhesives - Sampling and analysis of test data - Guide to statistical analysis |
| BS 2556-1973 |
手摇钻与胸压手摇钻规范 |
Specification for hand and breast drills |
| BS 5943-1980 |
矫形鞋靴的测量及记录方法 |
Methods for measurement and recording for orthopaedic footwear |
| BS 1473-1972 |
一般工程用可锻铝和铝合金规范.铆钉、螺栓和螺钉坯料 |
Specification for wrought aluminium and aluminium alloys for general engineering purposes - rivet, bolt and screw stock |
| BS 2782-1 Method 151A-1984 |
塑料试验方法.第1部分:热性能.挠性聚氯乙烯挤压混合物冷弯温度测定 |
Methods of testing plastics - Thermal properties - Determination of cold bend temperature of flexible polyvinyl chloride extrusion compound |
| BS 2782-4 Methods 451F to 451J-1978 |
塑料试验方法.第4部分:化学性能.酚醛模制材料甲醛含量测定(比色法).酚醛模制材料甲醛含量测定(重量法).酚醛 |
Methods of testing plastics - Chemical properties - Determination of formaldehyde in phenolic mouldings (colorimetric method) - Determination of formaldehyde in phenolic mouldings (gravimetric method) - Determination of sulphates in phenolic mouldings - D |
| BS EN 61988-3-1-2005 |
等离子体显示板.第3-1部分:机械接口 |
Plasma display panels - Part 3-1: Mechanical interface |
| BS 3698-1964 |
高铅酸钙底漆规范 |
Specification for calcium plumbate priming paints |
| BS 864-3-1975 |
铜和铜合金制毛细管与承压管管件.第3部分:聚乙烯管用承压管件 |
Capillary and compression tube fittings of copper and copper alloy - Compression fittings for polyethylene pipes |
| BS 1306-1975 |
铜与铜合金承压管道系统规范 |
Specification for copper and copper alloy pressure piping systems |
| BS 2782-10 Method 1001-1977 |
塑料试验方法.第10部分:玻璃纤维增强塑料.试验方法1001:用巴科尔硬度计测量硬度 |
Methods of testing plastics - Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor |
| BS 3506-1969 |
工业用未增塑聚氯乙烯管规范 |
Specification for unplasticized PVC pipe for industrial uses |
| BS 4991-1974 |
丙烯共聚物承压管规范 |
Specification for propylene copolymer pressure pipe |
| BS 2051-2-1984 |
工程用管与管接头规范.第2部分:橄榄型铜合金耐压管接头 |
Tube and pipe fittings for engineering purposes - Specification for olive type copper alloy compression tube fittings |
| BS 3727-12-1970 |
电子管和电子阀用镍的分析方法.硫含量测定(燃烧法) |
Methods for the analysis of nickel for use in electronic tubes and valves - Determination of sulphur (combustion method) |
| BS 3127-1979 |
黑色与有色金属波登管规范 |
Specification for ferrous and non-ferrous Bourdon tubing |
| BS 3839-1978 |
电子管及半导体器件用高导电率无氧铜规范 |
Specification for oxygen-free high-conductivity copper for electronic tubes and semiconductor devices |
| BS 5658-1979 |
电镀用含金氰化钾规范 |
Specification for gold potassium cyanide for electroplating |
| BS 3680-3D-1980 |
明渠流量测量.第3部分:河川流量测量.第3D节:动船法 |
Measurement of liquid flow in open channels - Stream flow measurement - Moving-boat method |
| BS 3680-4A-1981 |
明渠流量测量.第4部分:溢流堰和斜槽.第4A节.薄板堰法 |
Methods of measurement of liquid flow in open channels - Weirs and flumes - Method using thin-plate weirs |
| BS 3680-8B-1983 |
明渠流量测量.第8部分:测量仪器和设备.第8B节:直接测深和悬置设备推荐标准 |
Measurement of liquid flow in open channels - Measuring instruments and equipment - Recommendations for direct depth sounding and suspension equipment |
| BS 4656-15-1976 |
机床精度及试验方法.第15部分:转塔单轴座标钻床 |
Accuracy of machine tools and methods of test - Drilling machines , turret and single spindle co-ordinate types |
| BS 4656-18-1981 |
机床精度及试验方法.第18部分:卧式内拉床规范 |
Accuracy of machine tools and methods of test - Specification for broaching machines, horizontal internal type |
| BS 4656-25-1980 |
机床精度及试验方法.第25部分:刨齿机 |
Accuracy of machine tools and methods of test - Gear planing machines |
| BS 3727-11-1965 |
电子管和电子阀用镍的分析方法.第11部分:0.001-0.020％硅含量测定(光度测量法) |
Methods for the analysis of nickel for use in electronic tubes and valves - Determination of silicon 0.001-0.020 per cent (photometric method) |
| BS 3727-13-1965 |
电子管和电子阀用镍的分析方法.第13部分:钛含量测定(光度测量法) |
Methods for the analysis of nickel for use in electronic tubes and valves - Determination of titanium (photometric method) |
| DD CEN/TS 15297-2006 |
|
Solid Biofuels — Determination of minor elements |
| BS 5634-1978 |
氢氧化钾试验方法 |
Methods of test for potassium hydroxide |
| BS 5688-1-1979 |
工业用硼酸、氧化硼、四硼酸二钠、高硼酸钠与粗硼酸钠的试验方法.硼酸中硼酸含量测定 |
Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use - Determination of boric acid content of boric acid |
| BS 5998-1983 |
钢阀铸件的质量级规范 |
Specification for quality levels for steel valve castings |
| BS 5946-1980 |
测定苯酚-甲醛泡沫塑料燃烧特性的试验方法 |
Method of test for determination of the punking behaviour of phenol-formaldehyde foam |
| BS 3318-1978 |
土方机械规范.重心定位方法 |
Specification for earth-moving machinery - method for locating the centre of gravity |
| BS 3726-1978 |
平衡重叉车.稳定性.基本试验 |
Specification for counterbalanced lift trucks - stability - basic tests |
| BS 5276-4-1977 |
压力容器详细规格(尺寸).第4部分:标准化压力容器 |
Pressure vessel details (dimensions) - Standardized pressure vessels |
| BS 10-1962 |
管子、阀门和配件用法兰和螺栓连接规范 |
Specification for flanges and bolting for pipes, valves, and fittings |
| BS 3338-21-1983 |
锡及锡合金取样及分析方法.第21部分:软焊料中高镉含量测定方法 |
Methods for the sampling and analysis of tin and tin alloys - Determination of high cadmium content of soft solders |
| BS 2782-5 Methods 530A and 530B-1976 |
塑料的试验方法.风化下光学和颜色性能.黄色指数测定.近似白色或近似无色材料的测定 |
Methods of testing plastics - Optical and colour properties, weathering - Determination of yellowness index - Determination of the colour of near-white or near-colourless materials |
| BS EN 4434-2005 |
航空航天系列.电缆的铜和铜合金轻型导体.产品质量（正常和紧公差） |
Copper or copper alloy lightweight conductors for electrical cables — Product standard (Normal and tight tolerances) |
| BS EN 50377-10-2-2005 |
光纤通信系统中使用的连接器装置和互连组件.产品规范.第10-2部分:端接在IEC 60793-2 B1类光纤上的MU/APC型 |
Connectors sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 10-2: MU/APC singlemode terminated on IEC 60793-2 category B1 fibre |
| BS 622-1967 |
电镀用氰化钾和氰化钠规范 |
Specification for potassium and sodium cyanides for electroplating |
| BS 1214-1977 |
粗麻布砂袋与防腐粗麻布砂袋规范 |
Specification for hessian sandbags and rot-proofed hessian sandbags |
| BS 3810-1-1964 |
材料装卸术语.第1部分:托盘货车、托盘搬运车、手推运货车和机动运货车术语 |
Glossary of terms used in materials handling - Terms used in connection with pallets, stillages, hand and powered trucks |
| BS 3810-2-1965 |
材料装卸术语.第2部分:输送机及提升机(不包括气动和液压装卸)术语 |
Glossary of terms used in materials handling - Terms used in connection with conveyors and elevators (excluding pneumatic and hydraulic handling) |
| BS 1089-1973 |
外圆、内圆与万能磨床的转盘主轴头规范 |
Specification for workhead spindle noses for grinding machines: cylindrical external, internal and universal types |
| BS EN 62317-4-2005 |
铁氧体磁芯.尺寸.第4部分:RM磁芯及相关部件 |
Ferrite cores - Dimensions - Part 4: RM-cores and associated parts |
| BS 5809-1980 |
商用洗碗机燃气加热设备的安全性和效率规范 |
Specification for safety and efficiency of the gas heating equipment of commercial dishwashing machines |
| BS 4086-1966 |
加热式家用设备最大表面温度推荐标准 |
Recommendations for maximum surface temperatures of heated domestic equipment |
| BS 1846-2-1968 |
固体燃料燃烧设备的名词术语.第2部分:工业水加热和蒸气提升设备 |
Glossary of terms relating to solid fuel burning equipment - Industrial water heating and steam raising installations |
| BS 4120-1968 |
幻灯放映机性能的测量方法 |
Methods for the measurement of performance of still projectors |
| BS 4995-1973 |
透镜及光学系统面纱眩光指数测量推荐标准 |
Recommendations for measurement of the veiling glare index of lenses and optical systems |
| BS 2782-8 Method 835D-1980 |
塑料试验方法.第8部分:其他性能.试验方法835D:用热板测定热固性树脂胶凝时间 |
Methods of testing plastics - Other properties - Determination of gelation time of thermosetting resins using a hot plate |
| DD CLC/TS 50459-1-2005 |
|
Railway applications — Communication, signalling and processing systems — European Rail Traffic Management System — Driver-Machine Interface — Part 1: Ergonomic principles for the presentation of ERTMS/ETCS/GSM-R information |
| BS 4550-6-1978 |
水泥试验方法.第6部分:灰浆正方块体标准砂 |
Methods of testing cement - Standard sand for mortar cubes |
| BS 2782-5 Method 540B-1982 |
塑料的试验方法.风化条件下光学性能和颜色性能.实验室光源辐照方法,(氙弧灯、密封碳弧灯、敞口火焰碳弧灯、 |
Methods of testing plastics - Optical and colour properties, weathering - Methods of exposure to laboratory light sources, (xenon arc lamp, enclosed carbon arc lamp, open-flame carbon arc lamp, fluorescent tube lamps) |
| BS 2464-2-1969 |
石油、汽油和润滑油用软管接头规范.第2部分:高压接头 |
Specification for hose couplings for petrol, oil and lubricants - High pressure couplings |
| BS 2464-3-1968 |
汽油、石油和润滑剂用软管接头规范.第3部分:快速接头 |
Specification for hose couplings for petrol, oil and lubricants - Quick-acting couplings |
| BS 1659-1950 |
铁路信号用牵引电枢直流中性线拨轨继电器和线路继电器规范 |
Specification for tractive armature direct current neutral track and line relays for railway signalling |
| BS EN 60076-11-2004 |
电力变压器.干式变压器 |
Power transformers — Part 11: Dry-type transformers |
| BS 4145-1967 |
电工用玻璃云母板规范 |
Specification for glass mica boards for electrical purposes |
| DD CEN/TS 15279-2006 |
|
Workplace exposure — Measurement of dermal exposure — Principles and methods |
| BS 3618-7-1973 |
采掘术语.第7部分:电气工程和照明 |
Glossary of mining terms - Electrical engineering and lighting |
| BS 4486-1980 |
混凝土预加应力用热轧和热轧并处理的高抗拉强度的合金钢筋规范 |
Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete |
| BS 470-1984 |
压力容器检验孔、观察孔和入口孔规范 |
Specification for inspection, access and entry openings for pressure vessels |
| BS 5912-1980 |
直柄钻头及铰刀用转动榫及套筒尺寸规范 |
Specification for dimensions of driving tenons and sockets for parallel shank drills and machine reamers |
| BS 2585-1975 |
牙科射线照相胶片的尺寸规范 |
Specification for sizes of film for dental radiography |
| BS 3187-1978 |
导电橡胶地版材料规范 |
Specification for electrically conducting rubber flooring |
| BS 3475-1976 |
医院用碗架规范 |
Specification for bowl stands for use in hospitals |
| BS 3622-1975 |
医院一般用途凳子和麻醉师用椅子规范 |
Specification for general purpose stools and anaesthetists' chairs for hospital use |
| BS 4968-70-1973 |
邻苯二甲酸二异丁酯、邻苯二甲酸二异辛酯和癸二酸二异辛酯的规范 |
Specifications for di-isobutyl phthalate, di-isooctyl phthalate, di-isooctyl sebacate |
| BS 3046-1981 |
悬挂式柔性墙面涂料粘合剂规范 |
Specification for adhesives for hanging flexible wallcoverings |
| BS 4993-1-1974 |
工业用氟化铝试验方法.第1部分:氟含量测定 |
Methods of test for aluminium fluoride for industrial use - Determination of fluorine content |
| BS 4993-2-1974 |
工业用氟化铝试验方法.第2部分:铁含量测定 |
Methods of test for aluminium fluoride for industrial use - Determination of iron content |
| BS 4993-3-1974 |
工业用氟化铝试验方法.第3部分:硅含量测定 |
Methods of test for aluminium fluoride for industrial use - Determination of silica content |
| BS EN 60193-1999 |
水轮机、蓄水泵和泵轮机.模型验收试验 |
Hydraulic turbines, storage pumps and pump-turbines — Model acceptance tests |
| BS EN 61008-1-2004 |
家用和类似用途无完整过电流保护的残余电流操作断路器(RCCBs).第1部分:一般规则 |
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules |
| BS 5688-5-1979 |
工业用硼酸、氧化硼、四硼酸二钠、高硼酸钠与粗硼酸钠的试验方法.硼酸、氧化硼、四硼酸二钠和粗硼酸钠中硫 |
Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use - Determination of sulphur compounds in boric acid, boric oxide, disodium tetraborates a |
| BS 1728-21-1973 |
铝与铝合金的分析方法.第21部分:锌(原子吸收法) |
Methods for the analysis of aluminium and aluminium alloys - Zinc (atomic absorption method) |
| BS 4827-1972 |
ISO 小型螺纹规范.米制系列 |
Specification for ISO miniature screw threads - Metric series |
| BS 3402-1969 |
卫生陶瓷设备的质量规范 |
Specification for quality of vitreous china sanitary appliances |
| BS 5350-H1-1981 |
粘合剂试验方法.第H1部分:应用设备中热熔粘合剂热稳定性测定 |
Methods of test for adhesives - Determination of heat stability of hot melt adhesives in the application equipment |
| BS 5350-H2-1982 |
粘合剂试验方法.第H2部分:热熔粘合剂物理试验.低温挠性及冷爆裂温度测定 |
Methods of test for adhesives - Physical tests on hot-melt adhesives - Determination of low temperature flexibility or cold crack temperature |
| BS 5429-1976 |
低温液体小规模贮存设备安全操作实用规程 |
Code of practice for safe operation of small-scale storage facilities for cryogenic liquids |
| BS 5791-2-1979 |
压缩机、气动工具和气动机械术语.第2部分:压缩机 |
Glossary of terms for compressors, pneumatic tools and machines - Compressors |
| BS 5535-1978 |
直角板料与箱角板料规范 |
Specification for right angle and box angle plates |
| BS 6365-1983 |
精密游标深度卡尺规范 |
Specification for precision vernier depth gauges |
| BS 5791-1-1979 |
压缩机、气动工具和气动机械术语.第1部分:总则 |
Glossary of terms for compressors, pneumatic tools and machines - General |
| BS 1872-1984 |
锡电镀层规范 |
Specification for electroplated coatings of tin |
| BS 3597-1984 |
65/35锡/镍合金电镀层规范 |
Specification for electroplated coatings of 65/35 tin/nickel alloy |
| BS EN 4049-002-2005 |
热电偶膨胀电缆.工作温度-65℃～260℃.第002部分:总则 |
Thermocouple extension cable - Operating temperatures between -65 °C and 260 °C - Part 002: General |
| BS EN 4057-201-2005 |
航空航天系列.导线电缆扎匝.试验方法.外观检查 |
Cable ties for harnesses — Test methods — Part 201: Visual examination |
| BS EN 4057-202-2005 |
航空航天系列.导线电缆扎匝.试验方法.质量和尺寸的检查 |
Cable ties for harnesses — Test methods — Part 202: Examination of mass and dimensions |
| BS 3293-1960 |
石油工业用碳素钢管法兰(标称尺寸24英寸以上)规范 |
Specification for carbon steel pipe flanges (over 24 inches nominal size) for the petroleum industry |
| BS 4023-1975 |
挠性微孔聚氯乙烯片材规范 |
Specification for flexible cellular PVC sheeting |
| BS 903-A48-1984 |
橡胶的物理试验.第A48部分:对帘布静态附着力的测定(H拉力试验法) |
Methods of testing vulcanized rubber - Determination of static adhesion to textile cord (H-pull test) |
| BS 1728-22-1972 |
铝与铝合金的分析方法.第22部分:镁的测定(CDTA容量法) |
Methods for the analysis of aluminium and aluminium alloys - Determination of magnesium (volumetric CDTA method) |
| BS 1702-1950 |
中碳钢圆筒规范(重型:端盖固定的) |
Specification for mild steel drums (heavy duty - fixed ends) |
| BS 1728-25-1980 |
铝与铝合金的分析方法.第25部分:钛(变色酸分光光度法) |
Methods for the analysis of aluminium and aluminium alloys - Titanium (spectrophotometric chromotropic acid method) |
| BS 1468-1967 |
电镀用锡阳极和锡盐规范 |
Specification for tin anodes and tin salts for electroplating |
| BS 2909-1957 |
狗电安乐死的狗舍规范 |
Specification for cabinets for the electrical euthanasia of dogs |
| BS 4727-2 Group 02-1983 |
电工、电力、电信、电子学、照明和颜色术语.第2部分:电力工程专用术语.第02集:电力电子学术语 |
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms - Terms particular to power engineering - Power electronics terminology |
| BS 4031-1966 |
X 射线防护用铅玻璃规范 |
Specification for X-ray protective lead glasses |
| BS 5544-1978 |
防盗窗用玻璃(抗手击窗用玻璃)规范 |
Specification for anti-bandit glazing (glazing resistant to manual attack) |
| BS 3073-1977 |
镍和镍合金带材规范 |
Specification for nickel and nickel alloys: strip |
| BS 4436-1978 |
可前后移动叉车和跨式叉车规范.稳定性试验 |
Specification for reach and straddle fork lift trucks - stability tests |
| BS 4727 Pt.2 Group 03-1971 |
电工、电力、电信、电子学、照明和颜色术语词汇.第2部分:电力工程专用术语.第03集:旋转电机术语 |
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering. Rotating machinery terminology |
| BS 4300/10-1969 |
普通工程用锻造铝和铝合金规范(补充系列).第10部分:5454型冷拔管 |
Wrought aluminium and aluminium alloys for general engineering purposes (supplementary series) - 5454 Drawn tube |
| BS 1896-1972 |
印相纸的尺寸规范 |
Specification for sizes of reprographic papers |
| BS 1052-1980 |
通用工程低碳钢丝规范 |
Specification for mild steel wire for general engineering purposes |
| BS 1429-1980 |
通用工程弹簧用退火圆钢丝规范 |
Specification for annealed round steel wire for general engineering springs |
| BS 1918-1-1978 |
玻璃容器的精加工.第1部分:连续螺纹精加工规范 |
Glass container finishes - Specification for continuous thread finish |
| BS 1918-2-1981 |
玻璃容器的精加工.第2部分:冠形精加工规范 |
Glass container finishes - Specification for crown finish |
| BS 1873-1975 |
石油、石化及有关工业用钢球形阀、球形截止阀与单向阀(有法兰及对接焊端)规范 |
Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries |
| BS 4993-5-1980 |
工业用氟化铝试验方法.第5部分:含水量测定(卡尔费希尔法) |
Methods of test for aluminium fluoride for industrial use - Determination of moisture content (Karl Fischer method) |
| BS 4993-6-1980 |
工业用氟化铝试验方法.第6部分:含水量测定(称重法) |
Methods of test for aluminium fluoride for industrial use - Determination of moisture content (gravimetric method) |
| BS EN 61427-2005 |
光伏能系统(PVES)用二次电池和蓄电池组.一般要求和试验方法 |
Secondary cells and batteries for photovoltaic energy systems (PVES) — General requirements and methods of test |
| BS 4727-2 Group 09-1981 |
电工、电力、电信、电子学、照明和颜色术语.第2部分:电力工程专用术语.第09集:传导器术语 |
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms - Terms particular to power engineering - Transductor terminology |
| BS 1915-1968 |
幻灯机规范 |
Specification for still projectors |
| BS 3338-11-1961 |
锡及锡合金取样及分析方法.第11部分:焊料中锡含量测定方法(镍带卷还原法) |
Methods for the sampling and analysis of tin and tin alloys - Method for the determination of tin in solders (nickel coil reduction method) |
| BS 4140-6-1980 |
氧化铝试验方法.第6部分:钛含量测定 |
Methods of test for aluminium oxide - Determination of titanium content |
| BS 4140-20-1980 |
氧化铝试验方法.第20部分:取样 |
Methods of test for aluminium oxide - Sampling |
| BS 1647-1-1984 |
pH值测量.第1部分:pH值标度规范 |
pH measurement - Specification for pH scale |
| BS 3347-1961 |
铁路信号轨道电路用的电容器规范 |
Specification for capacitors for railway signalling track circuits |
| BS 2316 Pts.1 & 2-1968 |
射频电缆规范.第1部分:一般要求与试验.第2部分:英国政府公用设施要求 |
Specification for radio-frequency cables. General requirements and tests. British Government Services requirements |
| BS 2782-3 Method 332A-1976 |
塑料试验方法.第3部分:机械性能.试验方法332A:塑料薄膜韧性 |
Methods of testing plastics - Mechanical properties - Stiffness of plastics film |
| BS 519-1950 |
铁路信号用牵引电枢直流中性极化线路继电器规范 |
Specification for tractive armature direct current neutral-polar line relays for railway signalling |
| BS 2464-1954 |
汽油、石油和润滑剂用软管接头(标称尺寸 1/4英寸至 4英寸)规范 |
Specification for hose couplings for petrol, oil and lubricants (3/4 in. to 4 in. nominal sizes) |
| BS 437-1978 |
铸铁套接式排水管及配件规范 |
Specification for cast iron spigot and socket drain pipes and fittings |
| BS 778-1966 |
液压用钢管与接头规范 |
Specification for steel pipes and joints for hydraulic purposes |
| BS EN 4057-305-2005 |
航空航天系列.导线电缆扎匝.试验方法.染色牢度 |
Cable ties for harnesses -- Test methods -- Part 305: Coulor fastness |
| BS EN 4057-405-2005 |
导线电缆扎匝.试验方法.第405部分:罗盘安全距离 |
Cable ties for harnesses - Test methods - Part 405: Compass safe distance |
| BS EN 4057-407-2005 |
导线电缆扎匝.试验方法.第407部分:使用工具调整校验 |
Cable ties for harnesses - Test methods - Part 407: Verification of application tool settings |
| BS 4409-3-1982 |
螺旋输送机.第3部分:传动功率计算方法 |
Screw conveyors - Method for calculating drive power |
| BS 4656-3-1971 |
机床精度及试验方法.第3部分:卧式或立式平面升降台铣床 |
Specification for the accuracy of machine tools and methods of tests - Milling machines, knee and column type, horizontal or vertical spindle plain |
| BS 4656-4-1971 |
机床精度及试验方法.第4部分:卧式或立式铣床 |
Specification for the accuracy of machine tools and methods of test - Milling machines, bed type, horizontal or vertical spindle |
| BS 3075-1976 |
镍与镍合金线材规范 |
Specification for nickel and nickel alloys: wire |
| BS 426-1969 |
机床和其他用途的固定顶尖规范 |
Specification for fixed centres for use on machine tools and in other applications |
| BS 3466-1962 |
金属电阻材料每单位长度电阻试验方法 |
Methods of test for resistance per unit length of metallic electrical resistance material |
| PD 6434-1969 |
家用少烟固体燃料器具的设计和试验推荐标准 |
Recommendations for the design and testing of smoke reducing solid fuel burning domestic appliances |
| BS 4656-5-1979 |
机床精度及试验方法.第5部分:卧式万能升降台铣床 |
Specification for the accuracy of machine tools and methods of tests - Milling machines, knee and column type, horizontal spindle, universal |
| BS 4656-9-1974 |
机床精度及试验方法.第9部分:往复台式外圆磨床 |
Accuracy of machine tools and methods of test - External cylindrical grinding machines with reciprocating table |
| BS 2782-8 Method 835A-1980 |
塑料的试验方法.其他特性.酚醛树脂胶凝时间的测定 |
Methods of testing plastics - Other properties - Determination of gelation time of phenolic resins |
| BS 2782-8 Method 835B-1980 |
塑料的试验方法.其他特性.聚酯树脂胶凝时间的测定(手工方法) |
Methods of testing plastics - Other properties - Determination of gelation time of polyester resins (manual method) |
| BS 463-2-1970 |
钢丝绳锁环规范.米制单位 |
Specification for sockets for wire ropes - Metric units |
| BS 2782-3 Method 341A-1977 |
塑料试验方法.第3部分:机械性能.试验方法341A:增强塑料表观层间剪切强度测定 |
Methods of testing plastics - Mechanical properties - Determination of apparent interlaminar shear strength of reinforced plastics |
| BS 196-1961 |
电压达250V单相交流电路用带接地线的保护式不可反转插头、插座电缆藕合器与设备藕合器规范 |
Specification for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase a.c. circuits up to 250 volts |
| BS 3962-5-1980 |
木制家具精整试验方法.第5部分:表面耐冷凝油和脂肪性评定 |
Methods of test for finishes for wooden furniture - Assessment of surface resistance to cold oils and fats |
| BS 3962-6-1980 |
木制家具精整试验方法.第6部分:耐机械损伤性评定 |
Methods of test for finishes for wooden furniture - Assessment of resistance to mechanical damage |
| BS 1747-1-1969 |
空气污染的测量方法.第1部分:沉积测量计 |
Methods for the measurement of air pollution - Deposit gauges |
| BS 1747-2-1969 |
空气污染的测量方法.第2部分:悬浮物浓度的测定 |
Methods for the measurement of air pollution - Determination of concentration of suspended matter |
| BS 3680-10B-1980 |
明渠流量测量.第10部分:泥沙挟带.第10B节:悬浮泥沙测量 |
Measurement of liquid flow in open channels - Sediment transport - Measurement of suspended sediment |
| BS EN 61558-1-2005 |
电力变压器、供电、反应堆和类似产品的安全.第1部分:一般要求和试验 |
Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests |
| BS 1647-2-1984 |
pH值测量.第2部分:参考值标准溶液和工作参考标准溶液规范 |
pH measurement - Specification for reference value standard solutions and operational reference standard solutions |
| BS 2090-1954 |
钩形扳手、销子扳手、连接扳手和相关的槽、孔和柄臂规范 |
Specification for hook spanners, peg spanners, coupling wrenches and the related slots, holes and horns |
| BS 2559-3-1973 |
螺钉旋具规范.第3部分:绝缘螺钉旋具 |
Specification for screwdrivers - Insulated screwdrivers |
| BS 6271-1982 |
小型弓锯片规范 |
Specification for miniature hacksaw blades |
| BS 5955-6-1980 |
塑料管道工程(热塑性塑料).第6部分:自重排水和下水道用未增塑聚氯乙烯管道工程安装惯例 |
Plastics pipework (thermoplastics materials) - Code of practice for the installation of unplasticized PVC pipework for gravity drains and sewers |
| BS 1728-23-1976 |
铝与铝合金的分析方法.第23部分:铜(原子吸收法) |
Methods for the analysis of aluminium and aluminium alloys - Copper (atomic absorption method) |
| BS 1728-24-1976 |
铝与铝合金的分析方法.第24部分:镍(原子吸收法) |
Methods for the analysis of aluminium and aluminium alloys - Nickel (atomic absorption method) |
| BS 3504-1962 |
电子管阴极用镁活性镍规范 |
Specification for magnesium-activated nickel for cathodes of electronic tubes and valves |
| BS 4761-1971 |
工程用喷镀的未熔金属度层规范 |
Specification for sprayed unfused metal coatings for engineering purposes |
| BS 4950-1973 |
工程用喷涂和熔融金属度层规范 |
Specification for sprayed and fused metal coatings for engineering purposes |
| PD 6494-1980 |
螺纹系统的失配 |
Mismatch of screw thread systems |
| BS 6211-1982 |
运土机械驾驶员操纵系统规范:履带式拖拉机和履带式装载机 |
Specification for operator's controls for earth-moving machinery: crawler tractors and crawler loaders |
| BS 4624-1981 |
建筑用石棉水泥制品的试验方法 |
Methods of test for asbestos-cement building products |
| BS 6142-1981 |
农用拖拉机和农机液压系统技术数据的表述规范 |
Specification for presentation of technical data on hydraulic systems of agricultural tractors and machinery |
| BS 4317-1-1980 |
谷物和豆类测试方法.第1部分:千粒重量测定 |
Methods of test for cereals and pulses - Determination of the mass of 1000 grains |
| BS 952-2-1980 |
窗用玻璃.第2部分:玻璃作业用用名词术语 |
Glass for glazing - Terminology for work on glass |
| BS 2502-1979 |
人可进入的组合式冷藏间的制造规范 |
Specification for manufacture of sectional cold rooms (walk-in type) |
| BS 5643-1984 |
制冷、采暖、通风与空调术语词汇 |
Glossary of refrigeration, heating, ventilating and air-conditioning terms |
| BS 1188-1974 |
陶瓷盥洗盆与台座规范 |
Specification for ceramic wash basins and pedestals |
| BS 1329-1974 |
金属制洗手盆规范 |
Specification for metal hand rinse basins |
| BS 6285-1982 |
钢的硫印粗视组织检查法(鲍曼法) |
Method for the macrographic examination of steel by sulphur print (Baumann method) |
| BS 558 & 564-1970 |
电镀用镍阳极、阳极镍和镍盐规范 |
Specifications for nickel anodes, anode nickel and nickel salts for electroplating |
| BS 1561-1966 |
电镀用银阳极与银盐规范 |
Specification for silver anodes and silver salts for electroplating |
| BS 2569-2-1965 |
金属喷覆层的规范.高温下钢和铁的抗腐蚀和氧化保护 |
Specification for sprayed metal coatings - Protection of iron and steel against corrosion and oxidation at elevated temperatures |
| BS 3467-1962 |
精密电阻器合金丝电阻温度系数试验方法 |
Method of test for temperature coefficient of resistance of alloy wire for precision resistors |
| BS 561-1951 |
铁路信号用3位置、双元交流线路继电器规范 |
Specification for alternating-current line relays double-element 3-position (for railway signalling) |
| BS 5984-1980 |
限定的绝缘油抗氧添加剂检查和测定方法 |
Method for detection and determination of specified anti-oxidant additives in insulating oils |
| BS 2930-1970 |
外科用弹簧式托带规范 |
Specification for surgical spring trusses |
| BS 5263-1975 |
液体介质取样方法 |
Method for sampling liquid dielectrics |
| BS 903-A50-1984 |
橡胶的物理试验.第A50部分:在挠曲计试验中温升和耐疲劳性的测定(压缩挠曲计) |
Methods of testing vulcanized rubber - Determination of temperature rise and resistance to fatigue in flexometer testing (compression flexometer) |
| DD CEN/TS 15289-2006 |
|
Solid biofuels — Determination of total content of sulphur and chlorine |
| BS 5972-1980 |
道路照明用光电控制装置规范 |
Specification for photoelectric control units for road lighting |
| BS 131-1-1961 |
缺口棒试验.第1部分:金属的艾氏冲击试验 |
Notched bar tests - The Izod impact test of metals |
| BS 131-5-1965 |
缺口棒试验.第5部分:结晶度的测定 |
Notched bar tests - Determination of crystallinity |
| BS 1117-2-1964 |
精密电气设备用裸电阻丝规范.第2部分:米制单位 |
Specification for bare fine resistance wire for precision electrical equipment - Metric units |
| BS 581-1950 |
铁路用电动道岔转辙机规范 |
Specification for electrically-driven point-operating machines for railways |
| BS 4258-6-1976 |
工业用磷酸(正磷酸)试验方法.第6部分:砷含量测定 |
Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of arsenic content |
| BS 3271-1970 |
外科用弹性吊带规范 |
Specification for surgical elastic band trusses |
| BS 3348-1961 |
窦套针及套管规范 |
Specification for antral trocars and cannulae |
| BS 3522-1962 |
外科用皮下注射针头(流尔式针座) |
Specification for hypodermic surgical mounted needles (Luer fitting) |
| BS 417-1-1964 |
镀锌低碳钢蓄水池、蓄水池盖、水槽和筒.第1部分:英制单位 |
Specification for galvanized low carbon steel cisterns, cistern lids, tanks and cylinders. Imperial units |
| BS 5822-1979 |
农用圆盘耙规范:分类、主要固定尺寸和一般要求 |
Specification for agricultural discs: classification, main fixing dimensions and general requirements |
| BS 5350-A1-1976 |
粘合剂试验方法.第A1部分:粘附体.制备 |
Methods of test for adhesives - Adherends - Adherend preparation |
| BS 5350-B5-1976 |
粘合剂试验方法.第B5部分:胶凝时间的测定 |
Methods of test for adhesives - Determination of gelation time |
| DD CEN/TS 15290-2006 |
|
Solid Biofuels — Determination of major elements |
| BS 1990-1-1984 |
架空输电与通讯线路用木杆.第1部分:软木杆规范 |
Wood poles for overhead power and telecommunication lines - Specification for softwood poles |
| BS EN 4057-301-2005 |
导线电缆扎匝.试验方法.第301部分:盐雾试验 |
Cable ties for harnesses - Test methods - Part 301: Salt mist test |
| BS 4317-11-1976 |
谷物和豆类测试方法.第11部分:豆科作物配糖氢氰酸含量测定 |
Methods of test for cereals and pulses - Determination of glycosidic hydrocyanic acid in pulses |
| BS 3928-1969 |
空气过滤器的钠焰试验方法(为内燃机和压缩机供气用的除外) |
Method for sodium flame test for air filters (other than for air supply to I.C. engines and compressors) |
| BS 921-1976 |
电气用橡胶垫规范 |
Specification - Rubber mats for electrical purposes |
| BS 5591-1978 |
用液体萃取法测定电绝缘材料中离子杂质的试验方法 |
Methods of test for determination of ionic impurities in electrical insulating materials by extraction with liquids |
| BS 5626-1-1979 |
电工用纤维素纸.第1部分:定义和一般要求 |
Cellulosic papers for electrical purposes - Definitions and general requirements |
| BS 490-2-1975 |
输送机与提升机传动带.第2部分:链斗提升机用织物结构的橡胶和塑料传动带规范 |
Conveyor and elevator belting - Rubber and plastics belting of textile construction for use on bucket elevators |
| BS 3483-C3-1982 |
涂料用颜料试验方法.第C3部分:水萃取物酸度和碱度测定 |
Methods for testing pigments for paints - Determination of acidity or alkalinity of the aqueous extract |
| BS 2067-1953 |
绝缘材料的功率因子与电容率的测定(哈特逊和瓦德法) |
Determination of power-factor and permittivity of insulating materials (Hartshorn & Ward method) |
| BS 5350-D4-1976 |
粘合剂试验方法.第D4部分:粘接连接部位:环境试验.着色潜力测定 |
Methods of test for adhesives - Adhesively bonded joints: environmental tests - Determination of staining potential |
| BS 4222-1967 |
牙科手持机的传动联轴器(滑配接头)尺寸规范 |
Specification for dimensions of the transmission coupling (slip-joint) to dental handpieces |
| BS 4284-1981 |
牙印模膏(氧化锌类型)规范 |
Specification for dental impression pastes (zinc oxide type) |
| BS 4032-1978 |
纤维素纤维或合成纤维、纱线及织物或由这些纤维混纺的纱线及织物中水溶性或碱溶性添加剂测定的试验方法 |
Method of test for the determination of certain water- or alkali-soluble additives in cellulosic or synthetic fibres, yarns and fabrics or yarns and fabrics made from blends of such fibres |
| BS 3727-10-1964 |
电子管和电子阀用镍的分析方法.第10部分:0.020-0.25％硅含量测定(光度测量法) |
Methods for the analysis of nickel for use in electronic tubes and valves - Determination of silicon 0.020-0.25 per cent (photometric method) |
| BS 1929-1953 |
内窥镜与诊断仪器用照明灯螺纹及外部尺寸规范 |
Specification for screw threads and external dimensions of lamps for endoscopic and diagnostic instruments |
| BS 4618 Introduction-1970 |
塑料设计数据表示方法推荐标准.总则 |
Recommendations for the presentation of plastics design data - General introduction |
| BS 3594-2-1965 |
管子扳手规范.第2部分:轨迹型扳手 |
Specification for pipe wrenches - Footprint type wrenches |
| BS 4656-1-1981 |
机床精度及试验方法.第1部分:普通车床规范 |
Accuracy of machine tools and methods of test - Specification for lathes, general purpose type |
| BS 2043-1968 |
用投影显微镜测定毛纤维细度的方法 |
Method for the determination of wool fibre fineness by the use of a projection microscope |
| BS 93-1951 |
尺寸为0B.A.至16B.A.的英国协会(B.A.)螺纹与公差规范 |
Specification for British Association (B.A.) screw threads with tolerances for sizes 0 B.A. to 16 B.A |
| BS 811-1950 |
自行车(B.S.C.)螺纹规范(过去称为C.E.I.螺纹) |
Specification for cycle (B.S.C.) threads (formerly known as C.E.I. threads) |
| BS 2470-1973 |
六角凹头螺钉和套筒扳手规范.英制系列 |
Specification for hexagon socket screws and wrench keys - Inch series |
| BS 2558-1954 |
管状套筒扳手规范 |
Specification for tubular box spanners |
| BS 6319-1-1983 |
建筑用合成树脂胶料试验.第1部分:试验样品制备方法 |
Testing of resin and polymer/cement compositions for use in construction - Method for preparation of test specimens |
| BS 3727-21-1966 |
电子管和电子阀用镍的分析方法.第21部分:镁含量测定(原子吸收法) |
Methods for the analysis of nickel for use in electronic tubes and valves - Determination of magnesium (atomic absorption method) |
| BS 1640-2-1962 |
石油工业用钢质对接焊管配件规范.锻制和铸制奥氏体铬镍钢配件 |
Specification for steel butt-welding pipe fittings for the petroleum industry - Wrought and cast austenitic chromium-nickel steel fittings |
| BS 188-1977 |
液体粘度测定方法 |
Methods for determination of the viscosity of liquids |
| BS 5350-H3-1984 |
粘合剂试验方法.第H3部分:热熔粘合剂物理试验.热熔粘合剂耐热性测定 |
Methods of test for adhesives - Physical tests on hot-melt adhesives - Determination of heat resistance of hot-melt adhesives |
| BS 1657-1950 |
锯齿螺纹规范 |
Specification for buttress threads |
| BS 1936-1-1952 |
螺纹根部和收尾规范.第1部分:英制螺纹 |
Undercuts and runouts for screw threads - Inch screw threads |
| BS 3580-1964 |
螺纹强度设计考虑指南 |
Guide to design considerations on the strength of screw threads |
| BS 3727-14-1964 |
电子管和电子阀用镍的分析方法.第14部分:钨含量测定(重量法) |
Methods for the analysis of nickel for use in electronic tubes and valves - Determination of tungsten (gravimetric method) |
| BS 3727-15-1968 |
电子管和电子阀用镍的分析方法.第15部分:锌含量测定(光度测量法) |
Methods for the analysis of nickel for use in electronic tubes and valves - Determination of zinc (photometric method) |
| BS 3727-16-1966 |
电子管和电子阀用镍的分析方法.第16部分:化合镁和游离镁含量测定 |
Methods for the analysis of nickel for use in electronic tubes and valves - Determination of combined and free magnesium |
| BS 4578-1970 |
婴儿用枕头的硬度和透气性试验方法规范 |
Specification for methods of test for hardness of, and for air flow through, infants' pillows |
| BS 5438-1976 |
垂直取向织物与织物组件对小火焰引燃可燃性的试验方法 |
Methods of test for flammability of vertically oriented textile fabrics and fabric assemblies subjected to a small igniting flame |
| BS 2782-6 Method 621C-1983 |
塑料试验方法.第6部分:尺寸特性.模制材料体积系数测定 |
Methods of testing plastics - Dimensional properties - Determination of the bulk factor of moulding materials |
| BS 2782-6 Method 621D-1978 |
塑料试验方法.第6部分:尺寸特性.聚氯乙烯树脂压实表观体积密度测定 |
Methods of testing plastics - Dimensional properties - Determination of compacted apparent bulk density of PVC resins |
| BS 3037-1-1958 |
起重机轨轮用轮箍规范.第1部分:双法兰平行轮距轮箍 |
Specification for tyres for crane rail wheels - Double-flanged parallel-tread tyres |
| BS 770-5-1976 |
奶酪的化学分析法.第5部分:pH值的测定 |
Methods for chemical analysis of cheese - Determination of pH value |
| BS 770-6-1984 |
奶酪的化学分析法.第6部分:磷总含量的测定(分子吸收光谱法) |
Methods for chemical analysis of cheese - Determination of total phosphorus content - Molecular absorption spectrometric method |
| BS 1743-4-1980 |
奶粉和奶粉制品的分析方法.第4部分:速溶奶粉的可分散性和浸湿时间的测定 |
Methods for analysis of dried milk and dried milk products - Determination of the dispersibility and the wetting time of instant dried milk |
| BS 4585-2-1982 |
香料和调味品试验方法.第2部分:含水量测定(雾沫法) |
Methods of test for spices and condiments - Determination of moisture content (entrainment method) |
| BS 5061-1974 |
圆柱形青饲料塔贮规范及其使用推荐标准 |
Specification for cylindrical forage tower silos and recommendations for their use |
| BS 5168-1975 |
流变学术语词汇 |
Glossary of rheological terms |
| BS 643-1970 |
浇制钢丝绳端头用白色合金锭规范 |
Specification for white metal ingots for capping steel wire ropes |
| BS 4346-3-1982 |
未增塑聚氯乙烯压力管的接头及配件.第3部分:溶粘剂规范 |
Joints and fittings for use with unplasticized PVC pressure pipes - Specification for solvent cement |
| BS 3495-1972 |
铝垃圾箱规范 |
Specification for aluminium refuse storage containers |
| BS 4868-1972 |
建筑用成型薄铝板规范 |
Specification for profiled aluminium sheet for building |
| BS 5189-3-1975 |
牙科铸造包埋料.第3部分:硅酸乙酯粘结的牙科铸造包埋料 |
Dental casting investments - Ethyl silicate-bonded investment materials |
| BS 509-2-1984 |
工业用丙酮.第2部分:试验方法 |
Acetone for industrial use - Methods of test |
| BS 549-1970 |
双丙酮醇规范 |
Specification for diacetone alcohol |
| BS 2059/1-1957 |
观察记录表.直边花键.底部配件.浅底 |
Summary sheet: straight sided splines - Bottom fitting - Shallow |
| BS 2059/2-1957 |
观察记录表.直边花键.底部配件.深底 |
Summary sheet: straight sided splines - Bottom fitting - Deep |
| BS 2059/3-1957 |
观察记录表.直边花键.内部和外部 |
Summary sheet: straight sided serrations - Internal and external |
| BS 388-1972 |
铝颜料规范 |
Specification for aluminium pigments |
| BS 2583-1955 |
博奇板手规范 |
Specification for podger spanners |
| BS 3900-D7-1983 |
涂料的试验方法.第D集:涂料膜光学试验.第7部分:白色和浅色涂料遮盖力的库比尔凯-芒克测定法 |
Methods of test for paints - Optical tests on paint films - Determination of hiding power of white and light-coloured paints by the Kubelka-Munk method |
| BS 3900-E3-1973 |
涂料的试验方法.抗冲击(落锤)性 |
Methods of test for paints - Impact (falling weight) resistance |
| BS 3727-5-1964 |
电子管和电子阀用镍的分析方法.第5部分:钴含量测定(光度测量法) |
Methods for the analysis of nickel for use in electronic tubes and valves - Determination of cobalt (photometric method) |
| BS 3727-6-1964 |
电子管和电子阀用镍的分析方法.第6部分:铜含量测定(光度测量法) |
Methods for the analysis of nickel for use in electronic tubes and valves - Determination of copper (photometric method) |
| BS 3146-1-1974 |
金属熔模铸造规范.第1部分:碳素钢与低合金钢 |
Specification for investment castings in metal - Carbon and low alloy steels |
| BS 476-4-1970 |
建筑材料和结构的燃烧试验.材料的不可燃性试验 |
Fire tests on building materials and structures - Non-combustibility test for materials |
| BS 476-10-1983 |
建筑材料和结构的燃烧试验.第10部分:燃烧试验的原理和应用指南 |
Fire tests on building materials and structures - Guide to the principles and application of fire testing |
