| 标准号 |
中文名 |
英文名 |
| ASTM B 361-2002 |
工厂加工的锻制铝及铝合金焊接件的标准规范 |
Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings |
| ASTM A 1020/A 1020M-2002 |
锅炉、加热器、热交换器和冷凝器装置的熔焊碳素和碳锰钢管的标准规范 |
Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications |
| ASTM D 5309-2002 |
环己烷999的标准规范 |
Standard Specification for Cyclohexane 999 |
| ASTM D 3314-2002 |
橡胶的标准试验方法.丁苯橡胶及苯乙烯增强的胶乳中聚苯乙烯块的橡胶化学分析 |
Standard Test Method for Rubber-Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices |
| ASTM F 2079-2002 |
测量气球反冲力的标准试验方法.可膨胀幅度 |
Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents |
| ASTM D 6787-2002 |
可贮藏的书写薄的标准规范 |
Standard Specification for Repositionable Note Pad |
| ASTM F 2180-2002 |
外科植入用金属绞合线和电缆的标准规范 |
Standard Specification for Metallic Implantable Strands and Cables |
| ASTM E 2217-2002 |
航空航天清洁舱和污染控制区的设计和建造的标准实施规程 |
Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas |
| ASTM D 4771-2002 |
室内家具编织装饰用纤维的标准性能规范 |
Standard Performance Specification for Knitted Upholstery Fabrics for Indoor Furniture |
| ASTM D 478-2002 |
锌黄(铬酸锌)颜料的标准规范 |
Standard Specification for Zinc Yellow (Zinc Chromate) Pigments |
| ASTM D 4847-2002 |
机织遮阳篷和遮雨檐织物的标准规范 |
Standard Specification for Woven Awning and Canopy Fabrics |
| ASTM D 6223-2002 |
聚酯和玻璃纤维增强相结合的无规立构聚丙烯(APP)改良沥青片材的标准规范 |
Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements |
| ASTM E 1004-2002 |
用电磁(涡流)法测定电导率的标准实施规程 |
Standard Practice for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method |
| ASTM E 1475-2002 |
数字放射性测试数据的计算机化传输数据组的标准指南 |
Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Test Data |
| ASTM F 1326-2002 |
测量通用真空吸尘器的最大干燥空间的标准试验方法 |
Standard Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners |
| ASTM D 6739-2001 |
矽土pH值的标准试验方法 |
Standard Test Method for Silica - pH Value |
| ASTM D 4462-2002 |
磷酸氧化锌颜料的标准规范 |
Standard Specification for Zinc Hydroxy Phosphite Pigment |
| ASTM D 4912-2002 |
乙烯基涂覆玻璃丝防昆虫(蚊帐)布和百页窗帘布织物稳定性的标准试验方法 |
Standard Test Method for Fabric Stability of Vinyl-Coated Glass Yarn Insect Screening and Louver Cloth |
| ASTM E 2208-2002 |
评价非接触式光学应变测量系统的标准指南 |
Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems |
| ASTM E 2214-2002 |
说明和鉴定颜色测定仪性能的标准实施规程 |
Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments |
| ASTM E 809-2002 |
测量反光境的光度特性的标准实施规程 |
Standard Practice for Measuring Photometric Characteristics of Retroreflectors |
| ASTM D 4735-2002 |
用气相色谱法测定精制苯中微量噻吩的标准试验方法 |
Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography |
| ASTM C 1533-2002 |
热电解池的通用设计方法标准指南 |
Standard Guide for General Design Considerations for Hot Cell Equipment |
| ASTM E 1454-2002 |
数字超声波测试数据的计算机传送用数据段的标准指南 |
Standard Guide for Data Fields for Computerized Transfer of Digital Ultrasonic Testing Data |
| ASTM F 2176-2002 |
机械连接件用聚乙烯导管,排泄管和内部管道的标准规范 |
Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct |
| ASTM D 1677-2002 |
电绝缘用未处理云母纸的取样和测试的标准方法 |
Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation |
| ASTM E 1750-2002 |
水三相点瓶使用标准指南 |
Standard Guide for Use of Water Triple Point Cells |
| ASTM/ISO 7767-1997 |
监控病人呼吸混合物的氧分析仪的安全要求 |
Oxygen Monitors for Monitoring Patient Breathing Mixtures-Safety Requirements |
| ASTM F 1111-2002 |
用飞行器维护化学膜法测定低脆化镉板防腐蚀性的标准试验方法 |
Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals |
| ASTM D 4194-2003 |
反渗透装置和毫微渗透装置操作特性的标准试验方法 |
Standard Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices |
| ASTM G 48-2003 |
用氯化铁溶液测定不锈钢及有关合金耐点腐蚀和缝隙腐蚀的标准试验方法 |
Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution |
| ASTM B 335-2003 |
镍钼合金杆材标准规范 |
Standard Specification for Nickel-Molybdenum Alloy Rod |
| ASTM A 627-2003 |
阻滞和校准设备用工具阻力钢棒材、扁材和型材的标准试验规范 |
Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities |
| ASTM C 1491-2003 |
混凝土屋面铺筑材料的标准规范 |
Standard Specification for Concrete Roof Pavers |
| ASTM C 604-2002 |
用气体比重法测定耐火材料真实比重的标准试验方法 |
Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer |
| ASTM D 3981-2003 |
一般用途及包装用中等密度聚乙烯制成的聚乙烯薄膜的标准规范 |
Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications |
| ASTM C 550-2003 |
刚性绝热块和板的平直度和精度的标准试验方法 |
Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation |
| ASTM D 6909-2003 |
碳氟三元共聚物合成橡胶耐高温和耐酸的标准规范 |
Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer |
| ASTM D 4417-2003 |
喷砂清理钢表面轮廓现场测量的标准试验方法 |
Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel |
| ASTM F 1713-2003 |
外科植入物用锻制钛-13铌-13锆合金的标准规范 |
Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications |
| ASTM C 977-2003 |
土壤保持稳定用生石灰和熟石灰的标准规范 |
Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization |
| ASTM E 2280-2003 |
医疗保健设施的病房内装璜有软垫的座式家具作用的着火危险评定的标准导则 |
Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities |
| ASTM E 509-2003 |
轻水冷却核反应堆容器在运转中逐渐冷却的标准指南 |
Standard Guide for In-Service Annealing of Light-Water Cooled Nuclear Reactor Vessels |
| ASTM D 4799-2003 |
沥青材料加速风化试验条件和方法的标准实施规程(荧光UV、洒水冷凝法) |
Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method) |
| ASTM F 2212-2002 |
作为组织工程医疗产品(TEMPs)用外科植入物和底层原材料的I型胶原特性的标准指南 |
Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs) |
| ASTM F 2214-2002 |
超高分子量交联聚乙烯网络参数现场测定的标准试验方法 |
Standard Test Method forIn Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE) |
| ASTM D 1014-2002 |
金属基质涂料和涂层的室外暴露的标准试验规程 |
Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates |
| ASTM D 4971-2002 |
用径向加载76mm(3in)钻孔顶出装置测量岩石变型模量的标准试验方法 |
Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Using the Diametrically Loaded 76-mm (3-in.) Borehole Jack |
| ASTM/ISO 10079-3-1999 |
医疗抽吸设备.第3部分:真空或压力抽吸设备 |
Medical Suction Equipment - Part 3: Suction Equipment Powered from a Vacuum or Pressure Source |
| ASTM/ISO 1522-1998 |
涂料和清漆.摆杆阻尼试验 |
Paints and Varnishes - Pendulum Damping Test |
| ASTM F 2220-2002 |
Headforms标准规范 |
Standard Specification for Headforms |
| ASTM F 961-2003 |
外科植入物用钴镍铬钼合金锻件标准规范 |
Standard Specification for Cobalt-35 Nickel-20 Chromium-10 Molybdenum Alloy Forgings for Surgical Implants [UNS R30035] |
| ASTM F 2224-2003 |
外科植入物用高纯度硫酸钙半水合物或二水合物的标准规范 |
Standard Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants |
| ASTM E 2261-2003 |
用交流场测量技术检查焊缝的标准实施规范 |
Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique |
| ASTM E 262-2003 |
用放射性技术测定热中子反应和注量率的标准试验方法 |
Standard Method for Determining Thermal Neutron Reaction and Fluence Rates by Radioactivation Techniques |
| ASTM/ISO 4135-2001 |
麻醉和呼吸设备.词汇 |
Anaesthetic and Respiratory Equipment - Vocabulary |
| ASTM D 6813a-2002 |
活塞泵的液压液性能评定的标准指南 |
Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
| ASTM D 3164-2003 |
用拉伸负荷法测定胶粘剂粘接塑料搭接接头剪切强度特性的标准试验方法 |
Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading |
| ASTM D 3728-2003 |
2-乙氧基乙酸乙酯(99%级)用标准规范 |
Standard Specification for 2-Ethoxyethyl Acetate (99 % Grade) |
| ASTM D 6748a-2002 |
测定由于Phenalenes和Phenalenones存在而产生的中间馏出燃料的潜在不稳定性的标准试验方法(便携式光谱仪的 |
Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer) |
| ASTM D 6920-2003 |
用氧化燃烧及电化学探测法测定石脑油、馏出液、重整汽油、柴油、生物柴油及发动机燃料中总硫量的标准试验方 |
Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection |
| ASTM C 1068-2003 |
在核工业实验室鉴定测量方法的标准指南 |
Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry |
| ASTM F 1217-2003 |
蒸汽炊具的标准规范 |
Standard Specification for Cooker, Steam |
| ASTM D 1886-2003 |
水中镍含量的标准测试方法 |
Standard Test Methods for Nickel in Water |
| ASTM E 1361-2002 |
X射线光谱测定分析中共存元素效应校正的标准指南 |
Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis |
| ASTM E 1652-2003 |
金属外壳的铂电阻温度表、基金属热电耦和贵金属温差热电偶制造中使用的氧化镁和氧化铝粉末及压扁绝缘子的标 |
Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Metal-Sheathed Platinum Resistance Thermometers, Base Metal Thermocouples, and Noble Metal Thermocouples |
| ASTM C 444-2003 |
多孔混凝土管标准规范 |
Standard Specification for Perforated Concrete Pipe |
| ASTM E 572a-2002 |
用X射线荧光光谱测定法分析不锈钢和合金钢的标准试验方法 |
Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry |
| ASTM E 602-2003 |
圆柱形试样的锐切口张力试验的标准试验方法 |
Standard Test Method for Sharp-Notch Tension Testing with Cylindrical Specimens |
| ASTM E 636-2002 |
对E706(IH)核动力反应堆压力容器进行辅助监视试验的标准指南 |
Standard Guide for Conducting Supplemental Surveillance Tests for Nuclear Power Reactor Vessels, E 706 (IH) |
| ASTM E 1153-2003 |
无生命非食品接触面用推荐的消毒器效力的标准试验方法 |
Standard Test Method for Efficacy of Sanitizers Recommended for Inanimate Non-Food Contact Surfaces |
| ASTM D 6985a-2004 |
海军用中间馏出燃料油的标准规范 |
Standard Specification for Middle Distillate Fuel Oil-Military Marine Applications |
| ASTM D 7025a-2004 |
评估清洁亚麻纤维细度的标准试验方法 |
Standard Test Method for Assessing Clean Flax Fiber Fineness |
| ASTM C 1589-2005 |
建筑密封件和密封剂的室外老化的标准规程 |
Standard Practice for Outdoor Weathering of Construction Seals and Sealants |
| ASTM D 4776-2004 |
用H-试验法测试轮胎帘布及其他增强软线与橡胶化合物粘着性的标准试验方法 |
Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure |
| ASTM D 2650-2004 |
质谱法测定气体化学组成的标准试验方法 |
Standard Test Method for Chemical Composition of Gases By Mass Spectrometry |
| ASTM D 3227a-2004 |
电位差法测定汽油、煤油、航空涡轮机燃料及馏分燃料中硫醇态硫含量的标准试验方法 |
Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method) |
| ASTM F 2397a-2004 |
军体运动中使用的防护安全帽标准规范 |
Standard Specification for Protective Headgear Used in Martial Arts |
| ASTM D 524-2004 |
石油产品中兰氏残炭的标准试验方法 |
Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products |
| ASTM D 2692-2004 |
轮胎帘布织物、轮胎帘布、轮胎帘线及纱线的气体芯吸的标准试验方法 |
Standard Test Method for Air Wicking of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns |
| ASTM/ISO 14001-2004 |
环境管理体系.要求和使用指南 |
Environmental management systems - Requirements with guidance for use |
| ASTM F 2414-2004 |
用化学灌浆密封污水道检查孔的标准规程 |
Standard Practice for Sealing Sewer Manholes Using Chemical Grouting |
| ASTM F 457-2004 |
装有模拟或数字测量仪器的测速轮的速度及距离校准的标准试验方法 |
Standard Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation |
| ASTM D 4836-2004 |
双丙二醇-甲基醚的标准规范 |
Standard Specification for Dipropylene Glycol Monomethyl Ether |
| ASTM D 1871-2004 |
轮胎钢丝和橡胶间粘结性的标准试验方法 |
Standard Test Method for Adhesion Between Tire Bead Wire and Rubber |
| ASTM C 1583-2004 |
使用直接拉伸(拔出法)测定混凝土表面抗张强度和混凝土维修和覆盖材料粘结强度或抗张强度的标准试验方法 |
Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method) |
| ASTM C 1585-2004 |
用水硬水泥混凝土测量水吸收率的标准试验方法 |
Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes |
| ASTM A 752M-2004 |
合金钢条和粗圆钢丝(米制)一般要求的标准规范 |
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] |
| ASTM C 648-2004 |
瓷砖抗断强度的标准试验方法 |
Standard Test Method for Breaking Strength of Ceramic Tile |
| ASTM D 4517-2004 |
用无焰原子吸收光谱法测量高纯度水中低量硅总量的标准试验方法 |
Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy |
| ASTM D 5813-2004 |
现场硫化固定的热固性树脂污水管系统的标准规范 |
Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems |
| ASTM D 6940-2004 |
测量散装固体的筛选分离趋势的标准实施规程 |
Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids |
| ASTM F 1859-2004 |
无背衬的橡胶薄板地板覆盖物的标准规范 |
Standard Specification for Rubber Sheet Floor Covering Without Backing |
| ASTM E 2344-2004 |
口述过程中数据收集的标准指南 |
Standard Guide for Data Capture through the Dictation Process |
| ASTM D 5946-2004 |
用水触点角度测量法测定电晕处理聚合物薄膜的标准试验方法 |
Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements |
| ASTM D 6418-2004 |
用一次性芯取样器取样和储存土壤分析挥发性有机化合物的标准实施规程 |
Standard Practice for Using the Disposable En Core Sampler for Sampling and Storing Soil for Volatile Organic Analysis |
| ASTM D 2502-2004 |
粘度测量法估算石油润滑油分子量(相对分子量)的标准试验方法 |
Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements |
| ASTM F 431-2004 |
真空吸尘器充气室空气动力性能测量用标准规范 |
Standard Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners |
| ASTM F 146-2004 |
垫片材料抗流体作用的标准试验方法 |
Standard Test Methods for Fluid Resistance of Gasket Materials |
| ASTM F 1544-2004 |
测定弓箭额定速率的标准规范 |
Standard Specification for Determining the Rating Velocities of an Archery Bow |
| ASTM F 1947-2004 |
折叠聚氯乙烯(PVC)管进入现有排水管和管道中的安装标准实施规程 |
Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits |
| ASTM F 991M-2004 |
船坞/泄水孔塞和轴节配件的标准规范(米制) |
Standard Specification for Docking/Drain Plug and Boss Assemblies [Metric] |
| ASTM F 998-2004 |
船用离心泵标准规范 |
Standard Specification for Centrifugal Pump, Shipboard Use |
| ASTM G 119-2004 |
测定磨损与腐蚀之间最佳协和作用的标准指南 |
Standard Guide for Determining Synergism Between Wear and Corrosion |
| ASTM E 2255-2004 |
进行建筑物中铅危害目视评定的标准实施规程 |
Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings |
| ASTM E 1212-2004 |
无损检验机构质量管理体系的标准实施规程 |
Standard Practice for Quality Management Systems for Nondestructive Testing Agencies |
| ASTM E 1218-2004 |
用微型海藻做静态毒性试验的标准指南 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae |
| ASTM E 132-2004 |
室温下泊松比率的标准试验方法 |
Standard Test Method for Poisson's Ratio at Room Temperature |
| ASTM E 2361-2004 |
现场法测试Leave-On产品用标准指南 |
Standard Guide for Testing Leave-On Products Using In-Situ Methods |
| ASTM D 7030-2004 |
用压缩试验器测试恒定负荷下波面纤维板容器的短期蠕变性能的标准试验方法 |
Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine |
| ASTM D 1337-2004 |
利用粘度和粘结强度测定胶粘剂储存寿命的标准实施规程 |
Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength |
| ASTM E 1902-2002 |
口授、录音和录制的医疗记录的机密性和安全性的管理标准规范 |
Standard Specification for Management of the Confidentiality and Security of Dictation, Transcription, and Transcribed Health Records |
| ASTM D 6613-2002 |
测定尼龙或聚脂纤维尺寸的标准实施规程 |
Standard Practice for Determining the Presence of Sizing in Nylon or Polyester Fabric |
| ASTM D 2549-2002 |
洗脱色谱法分离高沸点油的典型芳烃和非芳烃馏分的标准试验方法 |
Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography |
| ASTM D 5462-2002 |
水中低水平溶解氧在线测量的标准试验方法 |
Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water |
| ASTM D 5511-2002 |
在强溶解液真空降解条件下测定塑性材料的真空生物降解的标准试验方法 |
Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions |
| ASTM D 6478-2002 |
测定充气缓冲物用织物的特殊密封性的标准试验方法 |
Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints |
| ASTM D 6479-2002 |
测定充气缓冲物用机织物耐边角精梳性的标准试验方法 |
Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints |
| ASTM D 6497-2002 |
土工薄膜与渗透层或结构间的机械连接标准指南 |
Standard Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures |
| ASTM E 1387-2001 |
用气相色谱法对火烧碎片样品的提取物中易燃液体残渣的标准试验方法 |
Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography |
| ASTM G 140-2002 |
用湿蜡法测定大气氯化物沉淀速率的标准试验方法 |
Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method |
| ASTM D 5904-2002 |
用紫外线、过硫酸盐氧化物和薄膜导电率检测法测定水中总含碳量、有机碳和无机碳的标准试验方法 |
Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection |
| ASTM D 5906-2002 |
地表水深度测量期间水平位置测量的标准指南 |
Standard Guide for Measuring Horizontal Positioning During Measurements of Surface Water Depths |
| ASTM D 6805-2002 |
测定沥青乳液芳香剂/脂肪比的红外法的标准实施规程 |
Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/Aliphatic Ratio of Bituminous Emulsions |
| ASTM D 6808-2002 |
水分析用的标准物质的生产者的能力要求的标准实施规程 |
Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
| ASTM D 91-2002 |
润滑油的沉淀值标准试验方法 |
Standard Test Method for Precipitation Number of Lubricating Oils |
| ASTM F 2183-2002 |
外科植入物用超高分子重量聚乙烯的小型打孔器检测的标准试验方法 |
Standard Test Method for Small Punch Testing of Ultra-High Molecular Weight Polyethylene Used in Surgical Implants |
| ASTM/ISO 51205-2002 |
硫酸高铈剂量测定系统使用的标准实施规程 |
Standard Practice for Use of a Ceric-Cerous Sulfate Dosimetry System |
| ASTM C 1311-2002 |
溶剂释放器密封剂的标准规范 |
Standard Specification for Solvent Release Sealants |
| ASTM F 790-2002 |
航空航天塑料透明外壳用试验材料的标准规范 |
Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures |
| ASTM F 942-2002 |
航空航天透明外壳用的夹层材料试验方法选择的标准指南 |
Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures |
| ASTM D 1308-2002 |
家用化学品对透明和着色有机面漆影响的标准试验方法 |
Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes |
| ASTM C 1266-2002 |
预制胶带密封剂流动特性的标准试验方法 |
Standard Test Method for Flow Characteristics of Preformed Tape Sealants |
| ASTM/ISO 51818-2002 |
能量在80-300Kev的辐射加工用电子束设备的剂量测定的标准实施规程 |
Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 80 and 300 keV |
| ASTM/ISO 51900-2002 |
食品和农产品辐射研究中剂量测定的标准指南 |
Standard Guide for Dosimetry in Radiation Research on Food and Agricultural Products |
| ASTM E 1683-2002 |
扫描拉曼分光仪性能试验的标准实施规程 |
Standard Practice for Testing the Performance of Scanning Raman Spectrometers |
| ASTM E 1829-2002 |
先于表面分析的样品处置标准指南 |
Standard Guide for Handling Specimens Prior to Surface Analysis |
| ASTM D 852-2002 |
苯凝固点的标准试验方法 |
Standard Test Method for Solidification Point of Benzene |
| ASTM E 2224-2002 |
利用远红外光谱测量法进行法医分析的标准指南 |
Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy |
| ASTM D 6222-2002 |
聚酯增强的无规立构聚丙烯(APP)改良沥青片材的标准规范 |
Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements |
| ASTM D 972-2002 |
润滑脂和润滑油蒸发损失的标准试验方法 |
Standard Test Method for Evaporation Loss of Lubricating Greases and Oils |
| ASTM D 882-2002 |
塑料薄板材抗拉特性的标准试验方法 |
Standard Test Method for Tensile Properties of Thin Plastic Sheeting |
| ASTM F 738M-2002 |
不锈钢米制螺栓、螺钉及螺柱(米制)的标准规范 |
Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
| ASTM F 836M-2002 |
1型不锈钢米制螺母标准规范 |
Standard Specification for Style 1 Stainless Steel Metric Nuts |
| ASTM F 880-2002 |
不锈钢凹头定位螺钉标准规范 |
Standard Specification for Stainless Steel Socket-Set Screws |
| ASTM F 880M-2002 |
不锈钢凹头定位螺钉(米制)标准规范 |
Standard Specification for Stainless Steel Socket Set Screws [Metric] |
| ASTM B 344-2001 |
电加热元件用拉制或轧制镍铬及镍铬铁合金标准规范 |
Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements |
| ASTM G 144-2001 |
用高温燃烧分析仪全碳分析法测定材料成分中残余物污染的标准试验方法 |
Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer |
| ASTM D 5220-2002 |
用中子深探针法对应有位置的土壤和岩石的含水量的标准试验方法 |
Standard Test Method for Water Content of Soil and Rock In-Place by the Neutron Depth Probe Method |
| ASTM D 6765-2002 |
现场打桩的标准实施规程 |
Standard Practice for Live Staking |
| ASTM D 6753-2002 |
煤焦油粘合剂标准规范 |
Standard Specification for Coal Tar Adhesive |
| ASTM D 6754-2002 |
酮乙烯酯基薄板屋面材料标准规范 |
Standard Specification for Ketone Ethylene Ester Based Sheet Roofing |
| ASTM D 952-2002 |
薄板塑料和电绝缘材料粘结强度的标准试验方法 |
Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials |
| ASTM D 953-2002 |
塑料支承强度的标准试验方法 |
Standard Test Method for Bearing Strength of Plastics |
| ASTM A 228/A 228M-2002 |
乐器用优质弹簧钢丝标准规范 |
Standard Specification for Steel Wire, Music Spring Quality |
| ASTM D 3865-2002 |
水中钚的标准试验方法 |
Standard Test Method for Plutonium in Water |
| ASTM A 413/A 413M-2001 |
碳素钢链标准规范 |
Standard Specification for Carbon Steel Chain |
| ASTM A 391/A 391M-2001 |
80度(角度)合金钢链条标准规范 |
Standard Specification for Grade 80 Alloy Steel Chain |
| ASTM D 6272-2002 |
通过四点弯曲对非增强和增强塑料和电气绝缘材料的柔韧特性的标准试验方法 |
Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending |
| ASTM D 6776-2002 |
在实验室模拟陆地环境下测定放射性塑料物质厌氧生物降解性的标准试验方法 |
Standard Test Method for Determining Anaerobic Biodegradability of Radiolabeled Plastic Materials in a Laboratory-Scale Simulated Landfill Environment |
| ASTM F 2174-2002 |
检验声音传播传感器响应的标准实施规程 |
Standard Practice for Verifying Acoustic Emission Sensor Response |
| ASTM E 2190-2002 |
绝缘玻璃器件性能和评价的标准规范 |
Standard Specification for Insulating Glass Unit Performance and Evaluation |
| ASTM E 2189-2002 |
测定绝缘玻璃器件耐雾性的标准试验方法 |
Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units |
| ASTM E 1828-2001 |
涂料中铅化学污染定性试验盒性能特征评估的标准规程 |
Standard Practice for Evaluating the Performance Characteristics of Qualitative Chemical Spot Test Kits for Lead in Paint |
| ASTM C 1487-2002 |
修理结构性硅玻璃门窗的标准指南 |
Standard Guide for Remedying Structural Silicone Glazing |
| ASTM D 6777-2002 |
聚氯乙烯挡板相对硬度的标准试验方法 |
Standard Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding |
| ASTM D 732-2002 |
用穿孔工具测量塑料剪切强度的标准试验方法 |
Standard Test Method for Shear Strength of Plastics by Punch Tool |
| ASTM D 747-2002 |
用悬臂梁法对塑料表观弯曲系数的标准试验方法 |
Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam |
| ASTM A 807/A 807M-2002 |
生活污水管及其它类似用途安装波纹钢板结构管道的标准实施规范 |
Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications |
| ASTM E 1495-2002 |
复合材料、叠层板材和粘接件的声学超声波评定的标准指南 |
Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints |
| ASTM E 827-2002 |
通过 Auger 电子光谱测定中的峰值识别元素的标准实施规程 |
Standard Practice for Indentifying Elements by the Peaks in Auger Electron Spectroscopy |
| ASTM E 1634-2002 |
溅射焰口深度测量标准导则 |
Standard Guide for Performing Sputter Crater Depth Measurements |
| ASTM E 968-2002 |
差分扫描量热计的热流量校准标准实施规程 |
Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters |
| ASTM E 748-2002 |
材料的热中子射线照相术的标准实施规程 |
Standard Practices for Thermal Neutron Radiography of Materials |
| ASTM E 185-2002 |
轻水冷却核反应堆容器的监督程序设计的标准操作规程 |
Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels |
| ASTM D 6299-2002 |
应用统计质量保证技术来评价分析测量系统性能的标准实施规程 |
Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance |
| ASTM D 2419-2002 |
土壤及细集料的砂当量值的标准测试方法 |
Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate |
| ASTM A 467/A 467M-2001 |
机器链和盘旋链标准规范 |
Standard Specification for Machine and Coil Chain |
| ASTM A 466/A 466M-2001 |
非焊接钢链标准规范 |
Standard Specification for Weldless Chain |
| ASTM F 1533-2001 |
变形的聚乙烯内衬标准规范 |
Standard Specification for Deformed Polyethylene (PE) Liner |
| ASTM E 292-2001 |
材料断裂时间的凹口张力试验的标准试验方法 |
Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials |
| ASTM F 2168-2002 |
包装材料、石墨、波纹带或织构带、冲压环的标准规范 |
Standard Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring |
| ASTM E 2197-2002 |
液体化学杀菌剂的杀菌,杀病毒剂的,杀细菌的,杀分枝杆菌的,杀芽孢菌剂活力测定的标准数量盘载波试验方法 |
Standard Quantitative Disk Carrier Test Method for Determining the Bactericidal, Virucidal, Fungicidal, Mycobactericidal and Sporicidal Activities of Liquid Chemical Germicides |
| ASTM D 6786-2002 |
用自动光学粒子计数器测定矿质绝缘油中粒子数的标准试验方法 |
Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters |
| ASTM C 1509-2002 |
串珠工艺玻璃管和配件的标准规范 |
Standard Specification for Beaded Process Glass Pipe and Fittings |
| ASTM A 836/A 836M-2002 |
玻璃衬里的管道系统和压力容器设备用钛稳定的碳素钢锻件标准规范 |
Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service |
| ASTM D 4742a-2002 |
用氧化薄膜吸收法对汽车发动机油氧化稳定性的标准试验方法 |
Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT) |
| ASTM D 240-2002 |
弹式量热器测定液烃燃料燃烧热的标准试验方法 |
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter |
| ASTM D 1351-2002 |
电线和电缆用热塑性聚乙烯绝缘材料的标准规范 |
Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable |
| ASTM D 1711-2002 |
电绝缘术语的标准规范 |
Standard Terminology Relating to Electrical Insulation |
| ASTM E 2195-2002 |
与咨询文件检验相关的标准术语 |
Standard Terminology Relating to the Examination of Questioned Documents |
| ASTM E 2198-2002 |
智利小植绥螨Athias-Henriot的规范(蜱螨目:植绥螨科) |
Specification for Phytoseiulus persimilis Athias-Henriot (Acarina:Phytoseiidae) |
| ASTM D 4288-2002 |
硼硅酸钙颜料的标准试验方法 |
Standard Specification for Calcium Borosilicate Pigments |
| ASTM D 4282-2002 |
用微扩散法测定水和污水中游离氰化物的标准试验方法 |
Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion |
| ASTM D 6793-2002 |
测定等温正割和正切体积弹性模量的标准试验方法 |
Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus |
| ASTM E 123-2002 |
蒸馏法水分测定装置的标准规程 |
Standard Specification for Apparatus for Determination of Water by Distillation |
| ASTM E 1348-2002 |
用半球体几何形状的分光光度法测量透明度和颜色的测试方法 |
Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM D 5428-2002 |
评定充气减震软组件性能的标准实施规程 |
Standard Practice for Evaluating the Performance of Inflatable Restraint Modules |
| ASTM D 5446-2002 |
测定在充气减振中用的织物、纱线和缝合线的物理性能的标准试验方法 |
Standard Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used in Inflatable Restraints |
| ASTM D 2330-2002 |
亚甲蓝活性物质的试验方法 |
Standard Test Method for Methylene Blue Active Substances |
| ASTM D 2538-2002 |
用转矩流变仪进行聚氯乙烯(PVC)化合物的熔化的标准实施规程 |
Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer |
| ASTM D 2581-2002 |
聚丁烯(PB)塑料塑膜和塑压材料的标准规范 |
Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials |
| ASTM C 1528-2002 |
外用尺寸石选则的标准指南 |
Standard Guide for Selection of Dimension Stone for Exterior Use |
| ASTM D 1687-2002 |
水中铬含量的标准试验方法 |
Standard Test Methods for Chromium in Water |
| ASTM E 2219-2002 |
评价和管理可移动和耐久性财产的标准实施规程 |
Standard Practice for Valuation and Management of Moveable, Durable Property |
| ASTM D 6806-2002 |
利用气相色析法对卤化有机溶剂及其混合物分析的标准实施规程 |
Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography |
| ASTM F 1506a-2002 |
暴露到瞬时电弧和相关热危害环境的电工用耐磨服装纺织材料抗燃的标准性能规范 |
Standard Performance Specification for Flame Resistant Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards |
| ASTM D 1598-2002 |
恒定内压下塑料管的破裂时间的标准测试方法 |
Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure |
| ASTM D 6815a-2002 |
木材和木质品的持续负载和蠕变影响评定的标准规范 |
Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products |
| ASTM D 6833-2002 |
用室内污染曝光装置测定打印纸和书写纸的加速温度老化的标准试验方法 |
Standard Test Method for Accelerated Pollutant Aging of Printing and Writing Paper by Pollution Chamber Exposure Apparatus |
| ASTM F 2172-2002 |
血液/静脉注射液/冲洗液保暖箱的标准规范 |
Standard Specification for Blood/Intravenous Fluid/Irrigation Fluid Warmers |
| ASTM D 1218-2002 |
液态烃的折射率和折射分散度的标准测试方法 |
Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids |
| ASTM F 1343-2002 |
麻醉气体净化系统的标准规范.传送和接收系统 |
Standard Specification for Anesthetic Gas Scavenging Systems-Transfer and Receiving Systems |
| ASTM F 2179-2002 |
蜡烛容器用退火的钠钙玻璃容器的标准规范 |
Standard Specification for Annealed Soda-Lime-Silicate Glass Containers That Are Produced for Use as Candle Containers |
| ASTM D 6809-2002 |
芳烃和有关材料的质量控制和质量保证规程的标准指南 |
Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
| ASTM B 825-2002 |
在金属试样上表面薄膜的电量(库仑)减少的标准试验方法 |
Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples |
| ASTM D 4453-2002 |
超纯水样品搬运的标准实施规程 |
Standard Practice for Handling of Ultra-Pure Water Samples |
| ASTM C 881/C 881M-2002 |
混凝土用环氧树脂基胶粘系统的标准规范 |
Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete |
| ASTM C 482-2002 |
瓷砖和硅酸盐水泥粘着强度的标准试验方法 |
Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement |
| ASTM D 6035-2002 |
使用一柔壁渗透计对压实的或非分散性土壤样品液体导电性冻融效果测定的标准试验方法 |
Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Undisturbed Soil Specimens Using a Flexible Wall Permeameter |
| ASTM D 6819-2002 |
用烘干炉曝光装置测定打印纸和书写纸的加速温度老化的标准试验方法 |
Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus |
| ASTM D 6821-2002 |
恒定剪切应力粘度计中传动线路润滑剂的低温粘度的标准试验方法 |
Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer |
| ASTM C 185-2002 |
水硬性水泥用灰浆的空气含量的标准试验方法 |
Standard Test Method for Air Content of Hydraulic Cement Mortar |
| ASTM E 2151-2002 |
独户式联排和分离住宅的规定和性能评定指南的标准术语 |
Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings |
| ASTM F 485-2002 |
去污剂对未涂漆飞行器表面影响的标准试验方法 |
Standard Test Method for Effects of Cleaners on Unpainted Aircraft Surfaces |
| ASTM F 502-2002 |
清洗及化学保养材料对涂漆飞行器表面影响的标准试验方法 |
Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces |
| ASTM F 694-2002 |
女鞋后跟附着强度的标准试验方法 |
Standard Test Method for Heel-Attaching Strength of Women's Shoes |
| ASTM D 2214-2002 |
用森科-菲奇装置估计皮革导热性的标准试验方法 |
Standard Test Method for Estimating the Thermal Conductivity of Leather with the Cenco-Fitch Apparatus |
| ASTM D 2272-2002 |
用旋转弹法测定汽轮机油氧化稳定性的标准试验方法 |
Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel |
| ASTM F 1307-2002 |
用电量传感器测定固体包装件氧传输率的标准试验方法 |
Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor |
| ASTM D 5073-2002 |
地表水深度测量的标准实施规程 |
Standard Practice for Depth Measurement of Surface Water |
| ASTM E 2229-2002 |
欺骗性(复写器)数据精神心理学检测说明的标准实施规范 |
Standard Practices for Interpretation of Psychophysiological Detection of Deception (Polygraph) Data |
| ASTM B 530-2002 |
用磁性法测量磁性和非磁性基底上的电解沉积镀镍层厚度的标准试验方法 |
Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates |
| ASTM C 805-2002 |
硬化混凝土的回弹指数的标准试验方法 |
Standard Test Method for Rebound Number of Hardened Concrete |
| ASTM F 2157-2002 |
合成表面运行轨道的标准规范 |
Standard Specification for Synthetic Surfaced Running Tracks |
| ASTM E 2207-2002 |
带有薄壁管状样品的应力控制轴向扭曲疲劳检验的标准实施规程 |
Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens |
| ASTM/ISO 51538-2002 |
乙醇氯苯剂量测定使用的标准实施规程 |
Standard Practice for Use of the Ethanol-Chlorobenzene Dosimetry System |
| ASTM F 2191-2002 |
包装材料、石墨或带状碳纱线的标准规范 |
Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn |
| ASTM F 2193-2002 |
脊锥骨外科组织固定用构件的标准规范和试验方法 |
Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System |
| ASTM F 34-2002 |
柔性阻挡材料液体提取物试验池结构的标准实施规程 |
Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials |
| ASTM/ISO 51261-2002 |
辐射加工剂量测定系统的选择和校准的标准指南 |
Standard Guide for Selection and Calibration of Dosimetry Systems for Radiation Processing |
| ASTM/ISO 51276-2002 |
甲基丙烯酸甲酯剂量测定系统使用的标准实施规程 |
Standard Practice for Use of a Polymethylmethacrylate Dosimetry System |
| ASTM F 837Ma-2002 |
不锈钢凹头螺钉螺丝的标准规范(米制) |
Standard Specification for Stainless Steel Socket Head Cap Screws [Metric] |
| ASTM D 6764-2002 |
从明渠中采集水温、溶解氧浓度、具体电导性和PH值的标准指南 |
Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels |
| ASTM F 410-2002 |
光学测量法对弹性地板覆盖物磨损层厚度的标准试验方法 |
Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement |
| ASTM D 4808-2001 |
低分辩核磁共振光谱仪对石油产品中含氢量的标准试验方法 |
Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy |
| ASTM F 837a-2002 |
不锈钢凹头螺钉螺丝的标准规范 |
Standard Specification for Stainless Steel Socket Head Cap Screws |
| ASTM D 6807-2002 |
反向渗透率为2-100S/cm的连续电去电离作用系统的操作性能的标准试验方法 |
Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from2 to 100 S/cm |
| ASTM D 6767-2002 |
用毛细管流量试验测定纺织物的标准试验方法 |
Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test |
| ASTM F 2170-2002 |
利用定向探头测定水泥地厚板相对湿度的标准试验方法 |
Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes |
| ASTM E 496-2002 |
用放射性技术测定3H(d,n)4He中子发生器所产生的中子通量率和平均能量的标准试验方法 |
Standard Test Method for Measuring Neutron Fluence and Average Energy from 3H(d,n)4He Neutron Generators by Radioactivation Techniques 1 |
| ASTM B 42-2002 |
无缝铜管标准尺寸标准规范 |
Standard Specification for Seamless Copper Pipe, Standard Sizes |
| ASTM E 69-2002 |
经烟管装置处理的木材的燃烧特性的标准试验方法 |
Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus |
| ASTM F 1580-2001 |
外科植入物涂敷用钛及钛-6铝-4钒合金粉末的标准规范 |
Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants |
| ASTM D 6305-2002 |
火焰阻滞剂处理的胶合板屋顶盖板计算弯曲强度设计调节因素的标准操作规程 |
Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing |
| ASTM D 6771-2002 |
地下水质探测用井和装置的低流量净化和取样的标准实施规程 |
Standard Practice for Low-Flow Purging and Sampling for Wells and Devices Used for Ground-Water Quality Investigations |
| ASTM D 6816-2002 |
测定沥青粘合剂的低温特性等级的标准实施规程 |
Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders |
| ASTM D 6827-2002 |
用火焰原子吸收(A.A.)法进行地板抛光聚合物锌分析的标准试验方法 |
Standard Test Method for Zinc Analysis of Floor Polishes and Floor Polish Polymers By Flame Atomic Absorption (A.A.) |
| ASTM D 695a-2002 |
硬质塑料抗压特性的标准试验方法 |
Standard Test Method for Compressive Properties of Rigid Plastics |
| ASTM E 1353-2002 |
装饰性家具部件的耐香烟点燃性的标准试验方法 |
Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture |
| ASTM D 870-2002 |
水浸渍法测试涂层的耐水性能的标准实施规程 |
Standard Practice for Testing Water Resistance of Coatings Using Water Immersion |
| ASTM D 942-2002 |
氧弹法测定润滑脂氧化稳定性的标准试验方法 |
Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method |
| ASTM E 2211-2002 |
电子个人(用户)医用记录仪的用户和供应商之间规则的标准实施规程 |
Standard Specification for Relationship Between a Person (Consumer) and a Supplier of an Electronic Personal (Consumer) Health Record |
| ASTM E 2215-2002 |
评价轻水核电反应堆监视舱的标准实施规程 |
Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels |
| ASTM E 2218-2002 |
测定形成限制曲线的标准试验方法 |
Standard Test Method for Determining Forming Limit Curves |
| ASTM/ISO 5361-1999 |
麻醉和呼吸设备.气管导管和连接件 |
Anaesthetic and Respiratory Equipment - Tracheal Tubes and Connectors |
| ASTM D 6007-2002 |
用小型室测定空气中来自木制品的甲醛浓度的标准试验方法 |
Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber |
| ASTM D 4541-2002 |
用手提式粘合试验仪测定涂层脱落强度的标准试验方法 |
Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM F 925-2002 |
弹性地板材料耐化学药品的标准试验方法 |
Standard Test Method for Resistance to Chemicals of Resilient Flooring |
| ASTM B 778-2002 |
成形线状致密同芯绞捻铝导线(AAC/TW)标准规范 |
Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW) |
| ASTM B 922-2002 |
物理吸收法测定金属粉末特定表面积的标准试验方法 |
Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption |
| ASTM E 1776-2001 |
火灾危险评定标准开发用标准指南 |
Standard Guide for Development of Fire-Risk-Assessment Standards |
| ASTM F 1240-2001 |
根据鞋类底部材料在脏的人行道路面上的防滑性试验结果对其进行分级的标准指南 |
Standard Guide for Ranking Footwear Bottom Materials on Contaminated Walkway Surfaces According to Slip Resistance Test Results |
| ASTM F 695-2001 |
测量鞋底、鞋后跟或有关材料的抗滑性所得试验数据评定的标准实施规范 |
Standard Practice for Ranking of Test Data Obtained for Measurement of Slip Resistance of Footwear Sole, Heel, and Related Materials |
| ASTM D 5632-2001 |
Halon 1301,三氟甲溴(CFBr)的标准规范 |
Standard Specification for Halon 1301, Bromotrifluoromethane (CF3Br) |
| ASTM D 5279-2001 |
塑料扭力的动力机械性能测量的标准试验方法 |
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion |
| ASTM D 1786-2001 |
甲苯二异氰酸盐标准规范 |
Standard Specification for Toluene Diisocyanate |
| ASTM D 6795-2002 |
测定用水、干冰和短时间(30min)加热后对发电机油渗透性影响的标准试验方法 |
Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30-min) Heating Time |
| ASTM D 5009-2002 |
实验室条件下评估和比较喷涂层传送效率的标准试验方法 |
Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions |
| ASTM B 775-2002 |
镍和镍合金焊接管一般要求的标准规范 |
Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe |
| ASTM F 552-2002 |
与链环栅栏相关的标准术语 |
Standard Terminology Relating to Chain Link Fencing |
| ASTM B 811-2002 |
核反应堆燃料包壳用锻制锆合金无缝管的标准规范 |
Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding |
| ASTM C 450-2002 |
公称尺寸的管件、容器隔热层用绝热配件覆盖物生产的标准实施规范 |
Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging |
| ASTM B 803-2002 |
钢芯铝和铝合金导线用涂覆高强度锌-5%铝-混合稀土合金钢芯线的标准规范 |
Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced |
| ASTM B 672-2002 |
镍铁铬钼铌稳定合金(UNS N08700)棒材及线材的标准规范 |
Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire |
| ASTM B 675-2002 |
UNS NO8367焊接管标准规范 |
Standard Specification for UNS N08367 Welded Pipe |
| ASTM B 746/B 746M-2002 |
现场栓接管、管拱和拱用波纹铝合金结构板的标准规范 |
Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches |
| ASTM B 740-2002 |
铜镍锡旋节合金带材的标准规范 |
Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip |
| ASTM B 75-2002 |
无缝铜管的标准规范 |
Standard Specification for Seamless Copper Tube |
| ASTM F 148-2002 |
软木合成垫料粘合耐久性的标准测试方法 |
Standard Test Method for Binder Durability of Cork Composition Gasket Materials |
| ASTM C 1543-2002 |
利用池塘法测定氯化物渗透到混凝土中的标准试验方法 |
Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding |
| ASTM B 68-2002 |
光亮退火的无缝铜管的标准规范 |
Standard Specification for Seamless Copper Tube, Bright Annealed |
| ASTM B 130-2002 |
弹头壳用商用青铜带材的标准规范 |
Standard Specification for Commercial Bronze Strip for Bullet Jackets |
| ASTM B 698-2002 |
无缝铜和铜合金管和管道的标准分类 |
Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube |
| ASTM D 8-2002 |
与道路和路面材料相关标准术语 |
Standard Terminology Relating to Materials for Roads and Pavements |
| ASTM F 656-2002 |
聚氯乙烯塑料管和配件的溶剂胶结接口用打底剂的标准规范 |
Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings |
| ASTM D 5373-2002 |
煤和焦碳的实验室样品中碳、氢和氮的仪器测定的试验方法 |
Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke |
| ASTM D 5425-2002 |
制定电工技术产品着火危险评定标准用的标准指南 |
Standard Guide for Development of Fire Hazard Assessment Standards of Electrotechnical Products |
| ASTM D 5982-2002 |
新鲜混制的土壤-混凝土的混凝土含量测定的标准试验方法(中热法) |
Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method) |
| ASTM D 6023-2002 |
可控制的低强度材料(CLSM)中空气含量、水泥含量、弯曲度和单位重量的标准试验方法 |
Standard Test Method for Unit Weight, Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM) |
| ASTM C 969M-2002 |
安装的预制混凝土污水管道的表面渗入和渗出的验收检验的标准实施规程(米制) |
Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric] |
| ASTM F 22-2002 |
用水膜破裂试验作疏水表面薄膜的标准试验方法 |
Standard Test Method for Hydrophobic Surface Films by the Water-Break Test |
| ASTM F 303-2002 |
航空航天流体和部件中粒子取样的标准实施规程 |
Standard Practices for Sampling for Particles in Aerospace Fluids and Components |
| ASTM B 828-2002 |
用铜、铜合金管和配件钎焊制作毛细管接缝的标准实施规程 |
Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings |
| ASTM F 1861-2002 |
弹性墙基的标准规范 |
Standard Specification for Resilient Wall Base |
| ASTM D 5085-2002 |
用化学抑制离子色谱法测定大气湿沉积物中氯化物、硝酸盐、硫酸盐含量的标准试验方法 |
Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography |
| ASTM D 5096-2002 |
测定杯形风速计或螺旋桨风速计性能的标准试验方法 |
Standard Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer |
| ASTM D 5149-2002 |
大气臭氧浓度的标准试验方法:化学发光乙烯的连续测量 |
Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence |
| ASTM F 2196-2002 |
循环液体和加压气体的病人温度管理设施的标准规范 |
Standard Specification for Circulating Liquid and Forced Air Patient Temperature Management Devices |
| ASTM F 2199-2002 |
测定受热后弹性地板砖尺寸稳定性的标准试验方法 |
Standard Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat |
| ASTM F 307-2002 |
气体分析用压缩气体取样的标准实施规程 |
Standard Practice for Sampling Pressurized Gas for Gas Analysis |
| ASTM F 336-2002 |
腐蚀作业用非金属包封衬垫的设计和结构的标准实施规程 |
Standard Practice for Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service |
| ASTM F 433-2002 |
衬垫材料的导热性评定的标准实施规程 |
Standard Practice for Evaluating Thermal Conductivity of Gasket Materials |
| ASTM C 158-2002 |
玻璃的挠曲标准试验方法(测定玻璃挠折模量) |
Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture) |
| ASTM C 469-2002 |
混凝土在压缩中静态弹性模量及泊松比的标准测试方法 |
Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression |
| ASTM C 1542/C 1542M-2002 |
测量混凝土芯长度的标准试验方法 |
Standard Test Method for Measuring Length of Concrete Cores |
| ASTM E 1359-2002 |
检查无损检验机构能力的标准指南 |
Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies |
| ASTM E 1139-2002 |
连续监测来自金属压力界面的声发射的标准实施规程 |
Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries |
| ASTM B 395/B 395M-2002 |
U型弯曲无缝铜和铜合金热交换器和冷凝器管的标准规范 |
Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes |
| ASTM B 539-2002 |
测量电气连接(静态接触)接触电阻的标准试验方法 |
Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts) |
| ASTM D 409-2002 |
粉碎机法测定煤炭粉碎性的试验方法 |
Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method |
| ASTM D 6202-2002 |
在系列VIA火花点火发动机客车和轻型卡车的燃料经济学中汽车发动机油的标准试验方法 |
Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine |
| ASTM C 1285-2002 |
确定核废物和混合废弃玻璃及多相玻璃陶瓷耐化学性能的标准试验方法:产品一致性试验(PCT) |
Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT) |
| ASTM D 5607-2002 |
在恒定的常规应力下进行岩石样品的实验室直接剪切强度试验的标准试验方法 |
Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force |
| ASTM D 2111-2002 |
卤化有机溶剂及其混合物的比重和密度的标准试验方法 |
Standard Test Methods for Specific Gravity and Density of Halogenated Organic Solvents and Their Admixtures |
| ASTM D 2219-2002 |
工作温度60°C的电线和电缆用聚氯乙烯绝缘性的标准规范 |
Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60 °C Operation |
| ASTM F 2187-2002 |
在薄膜开关或薄膜开关组合上检测射频振动影响的标准试验方法 |
Standard Test Method for Determining the Effect of Random Frequency Vibration on a Membrane Switch or Membrane Switch Assembly |
| ASTM E 1058-2002 |
自走式农业用车辆驾驶室内环境毒性污染的标准试验方法 |
Standard Test Methods for the Toxic Contamination of the Environment in the Operator Enclosure of Self-Propelled Agriculture Vehicles |
| ASTM D 2804-2002 |
气相色谱法测定丁酮纯度的标准试验方法 |
Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography |
| ASTM D 6738-2001 |
沉淀二氧化硅的标准试验方法.挥发物的含量 |
Standard Test Method for Precipitated Silica-Volatile Content |
| ASTM B 670-2002 |
高温设备用沉淀淬火镍合金(UNS N07718) 厚板、薄板及带材的标准规范 |
Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service |
| ASTM B 350/B 350M-2002 |
核工业用锆和锆合金铸锭的标准规范 |
Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application |
| ASTM A 952/A 952M-2002 |
锻造等级 80 和等级100 的合金钢提升组件和焊接联接杆的标准规范 |
Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links |
| ASTM D 5603-2001 |
橡胶复合材料-再生颗粒性硫化橡胶的标准分类 |
Standard Classification for Rubber Compounding Materials - Recycled Vulcanizate Particulate Rubber |
| ASTM D 2632-2001 |
橡胶特性的标准试验方法.垂直回跳法测定橡胶弹性 |
Standard Test Method for Rubber Property - Resilience by Vertical Rebound |
| ASTM D 4037-2002 |
机织、针织或植绒床罩织物的标准性能规范 |
Standard Performance Specification for Woven, Knitted, or Flocked Bedspread Fabrics |
| ASTM D 4078-2002 |
水乳化地板擦亮剂标准规范 |
Standard Specification for Water Emulsion Floor Polish |
| ASTM D 4275-2002 |
用气相色谱法测定乙烯和乙烯-乙烯基醋酸酯共聚物的聚合物中丁酸化羟基甲苯的标准试验方法 |
Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene-Vinyl Acetate (EVA) Copolymers By Gas Chromatography |
| ASTM D 5291-2002 |
仪器测定石油产品及润滑剂中碳、氢和氮含量的标准试验方法 |
Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants |
| ASTM D 4629-2002 |
注射/插入氧化燃料和化学发光法测定液态石油碳氢化合物中痕量有机结合物氮的标准试验方法 |
Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection |
| ASTM D 4726-2002 |
装配门窗用的硬质聚氯乙烯外部挤压型材的标准规范 |
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors |
| ASTM F 711-2002 |
火线工具用玻璃纤维增强塑料棒和管的标准规范 |
Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools |
| ASTM D 6796-2002 |
在国际实验室中煤,焦炭和煤燃烧样品生产的标准实施规程 |
Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies |
| ASTM B 352/B 352M-2002 |
核设备用锆和锆合金薄板,带和板材的标准规范 |
Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application |
| ASTM A 906/A 906M-2002 |
悬挂式提升设备用等级 80 和 等级100 的合金钢链式吊索的标准规范 |
Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting |
| ASTM C 969-2002 |
安装的预制混凝土污水管道的表面渗入和渗出的验收检验的标准实施规程 |
Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines |
| ASTM D 204-2002 |
缝纫线的标准试验方法 |
Standard Test Methods for Sewing Threads |
| ASTM D 2102-2002 |
织物纤维收缩性的标准试验方法 |
Standard Test Method for Shrinkage of Textile Fibers (Bundle Test) |
| ASTM D 2255-2002 |
短纤纱外观的分级的标准试验方法 |
Standard Test Method for Grading Spun Yarns for Appearance |
| ASTM D 2749-2002 |
塑料管配件尺寸用标准符号 |
Standard Symbols for Dimensions of Plastic Pipe Fittings |
| ASTM C 516-2002 |
蛭石制疏松填充隔热材料的标准规范 |
Standard Specification for Vermiculite Loose Fill Thermal Insulation |
| ASTM D 2825-2002 |
磨料及相关材料的标准术语 |
Standard Terminology Relating to Polishes and Related Materials |
| ASTM D 4731-2002 |
电信电线和电缆用热充填化合物的标准规范 |
Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable |
| ASTM D 4732-2002 |
电信电线和电缆用冷充填化合物的标准规范 |
Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable |
| ASTM D 4832-2002 |
被控制的低强度材料测试筒的制备和测试的标准检测方法 |
Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders |
| ASTM D 4943-2002 |
用蜂蜡法对土壤收缩系数的标准试验方法 |
Standard Test Method for Shrinkage Factors of Soils by the Wax Method |
| ASTM F 811-2002 |
机动车辆的轮胎试验用加速度计的标准实施规程 |
Standard Practice for Accelerometer Use in Vehicles for Tire Testing |
| ASTM D 1968a-2002 |
纸和纸产品相关的标准术语 |
Standard Terminology Relating to Paper and Paper Products |
| ASTM A 977/A 977M-2002 |
利用磁滞图示器对高矫顽永久磁性材料磁性能的标准试验方法 |
Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs |
| ASTM B 135-2002 |
无缝黄铜管的标准规范 |
Standard Specification for Seamless Brass Tube |
| ASTM B 22-2002 |
桥梁和转车台用青铜铸件的标准规范 |
Standard Specification for Bronze Castings for Bridges and Turntables |
| ASTM D 4730-2002 |
电信电线和电缆用浸渍化合物的标准规范 |
Standard Specification for Flooding Compounds for Telecommunications Wire and Cable |
| ASTM D 4208-2002 |
用氧弹燃烧/离子选择电极法对煤中总氯含量的试验方法 |
Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method |
| ASTM D 6024-2002 |
用球落在可控制的低强度材料上的方法测定荷载适用性的标准试验方法 |
Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application |
| ASTM D 3177-2002 |
煤和焦炭的分析样品中总硫含量的标准试验方法 |
Standard Test Methods for Total Sulfur in the Analysis Sample of Coal and Coke |
| ASTM D 3359-2002 |
胶带试验用测定粘合性的标准试验方法 |
Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM C 924-2002 |
低压空气试验法测试混凝土污水管道的标准实施规程 |
Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method |
| ASTM E 2228-2002 |
纺织纤维的显微镜检验用标准指南 |
Standard Guide for Microscopic Examination of Textile Fibers |
| ASTM E 2230-2002 |
放射性材料的"B"型包装热限制的标准实施规程 |
Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material |
| ASTM C 512-2002 |
压缩过程中混凝土蠕变的标准试验方法 |
Standard Test Method for Creep of Concrete in Compression |
| ASTM D 3551-2002 |
用机械搅拌器在实验室中制备土壤-石灰石混合物的标准实施规程 |
Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using a Mechanical Mixer |
| ASTM F 868-2002 |
层压复合衬垫材料的标准分类 |
Standard Classification for Laminated Composite Gasket Materials |
| ASTM C 706-2002 |
动物饲料用石灰岩的标准规范 |
Standard Specification for Limestone for Animal Feed Use |
| ASTM C 582-2002 |
耐腐蚀设备用接触模压的增强热塑性层压材料标准规范 |
Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment |
| ASTM C 183-2002 |
水硬性水泥的取样及检测量的标准实施规程 |
Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement |
| ASTM C 553-2002 |
商用和工业用矿物纤维毡隔热的标准规范 |
Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications |
| ASTM B 547/B 547M-2002 |
成形的和电弧焊接的铝及铝合金圆管标准规范 |
Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube |
| ASTM B 345/B 345M-2002 |
气体和油传输和配送管道系统用铝及铝合金无缝管和无缝挤制管标准规范 |
Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems |
| ASTM B 427-2002 |
齿轮用青铜合金铸件标准规范 |
Standard Specification for Gear Bronze Alloy Castings |
| ASTM D 5093-2002 |
使用有密封内环的双环渗透计现场测量渗透率的标准试验方法 |
Standard Test Method for Field Measurement of Infiltration Rate Using a Double-Ring Infiltrometer with a Sealed-Inner Ring |
| ASTM D 5257-2003 |
用离子色谱法测定水中可溶六价铬的标准试验方法 |
Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography |
| ASTM D 5321-2002 |
用直接剪力法测定土壤与土工合成物或土工合成物之间摩擦系数的标准试验方法 |
Standard Test Method for Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method |
| ASTM E 1272-2002 |
带刻度的圆柱形实验室玻璃器皿的标准规范 |
Standard Specification for Laboratory Glass Graduated Cylinders |
| ASTM E 143-2002 |
室温下剪切模量的标准试验方法 |
Standard Test Method for Shear Modulus at Room Temperature |
| ASTM D 279-2002 |
颜料渗出的标准试验方法 |
Standard Test Methods for Bleeding of Pigments |
| ASTM D 2943-2002 |
测定稳定性用1,1,1-三氯乙烷的铝刮痕标准试验方法 |
Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability |
| ASTM D 1837a-2002 |
液化石油气挥发性的标准试验方法 |
Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases |
| ASTM D 2256-2002 |
单绞线法测定纱线抗拉特性的标准试验方法 |
Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method |
| ASTM D 1169-2002 |
电绝缘液体电阻率(电阻系数)的标准测试方法 |
Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids |
| ASTM F 441/F 441M-2002 |
氯化聚氯乙烯(CPVC)塑料管道的标准规范(40和80号表) |
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 |
| ASTM E 1254-2003 |
射线照片和未曝光工业用射线照相胶片储存的标准指南 |
Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films |
| ASTM E 1363-2003 |
热机械分析仪温度校准的标准试验方法 |
Standard Test Method for Temperature Calibration of Thermomechanical Analyzers |
| ASTM C 5-2003 |
建筑用生石灰标准规范 |
Standard Specification for Quicklime for Structural Purposes |
| ASTM B 164-2003 |
镍铜合金杆材、棒材和线材标准规范 |
Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire |
| ASTM B 333-2003 |
镍钼合金板、薄板和带材标准规范 |
Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip |
| ASTM E 783-2002 |
现场测量安装的外门窗漏气性的标准试验方法 |
Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors |
| ASTM C 841-2003 |
室内板条及垫高料安装的标准规范 |
Standard Specification for Installation of Interior Lathing and Furring |
| ASTM C 1172-2003 |
建筑用夹层平板玻璃标准规范 |
Standard Specification for Laminated Architectural Flat Glass |
| ASTM C 1194-2003 |
建筑铸石抗压强度的标准试验方法 |
Standard Test Method for Compressive Strength of Architectural Cast Stone |
| ASTM D 3288-2003 |
磁性金属丝瓷漆的标准试验方法 |
Standard Test Methods for Magnet-Wire Enamels |
| ASTM D 3294-2003 |
聚四氟乙烯树脂模压薄板和基本模压型材的标准规范 |
Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes |
| ASTM D 3346-2003 |
橡胶特性的标准试验方法.用门尼粘度计测定SBR(丁苯橡胶)的加工性能 |
Standard Test Methods for Rubber Property - Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney) |
| ASTM C 947-2003 |
薄剖面玻璃纤维增强混凝土挠曲特性的试验方法(使用1/3跨度点荷载的简支梁) |
Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading) |
| ASTM D 3373-2003 |
水中钒含量的标准测试方法 |
Standard Test Method for Vanadium in Water |
| ASTM D 3437-2003 |
液体环状产物的抽样和搬运标准实施规程 |
Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 6111-2003 |
通过位移测试塑料条材和型材体密度和比重的标准试验方法 |
Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement |
| ASTM D 3903-2003 |
太阳能系统的热空气传递用橡胶密封件的标准规范 |
Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems |
| ASTM D 4130-2003 |
微咸水、海水和盐水中硫酸盐离子的标准测试方法 |
Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines |
| ASTM D 6108-2003 |
塑料条材和形材压缩特性的标准试验方法 |
Standard Test Method for Compressive Properties of Plastic Lumber and Shapes |
| ASTM D 2880-2003 |
燃气轮机用燃料油标准规范 |
Standard Specification for Gas Turbine Fuel Oils |
| ASTM D 2881-2003 |
金属加工液和有关材料的标准分类 |
Standard Classification for Metal Working Fluids and Related Materials |
| ASTM D 5463-2003 |
水中无机成分测量用整套试验工具使用的标准指南 |
Standard Guide for Use of Test Kits to Measure Inorganic Constituents in Water |
| ASTM D 5755-2003 |
用石棉结构值表面负荷用透射电子显微镜对尘埃微真空取样和间接分析的标准试验方法 |
Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading |
| ASTM F 1853-2003 |
测量睡袋密封量的标准试验方法 |
Standard Test Method for Measuring Sleeping Bag Packing Volume |
| ASTM B 826-2003 |
用电阻探头监测大气腐蚀试验的标准试验方法 |
Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes |
| ASTM D 5053-2003 |
皮革摩擦脱色的色牢度的标准试验方法 |
Standard Test Method for Colorfastness of Crocking of Leather |
| ASTM F 2278-2003 |
评定采弹拦截网的标准试验方法 |
Standard Test Method for Evaluating Paintball Barrier Netting |
| ASTM C 1233-2003 |
核材料中当量硼含量测定的标准实施规范 |
Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials |
| ASTM E 957-2003 |
地热能的有关标准术语 |
Standard Terminology Relating to Geothermal Energy |
| ASTM D 2885-2003 |
用在线直接比较技术测定火花点火式发动机燃料辛烷值的标准试验方法 |
Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique |
| ASTM E 1293-2002 |
玻璃测量移液管标准规范 |
Standard Specification for Glass Measuring Pipets |
| ASTM D 3730-2003 |
高性能结构内墙面饰层试验的标准指南 |
Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
| ASTM F 913-2002 |
连接塑料管用热塑弹性密封件(垫圈)标准规范 |
Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
| ASTM G 118-2002 |
适用于数据库的滑动磨损试验数据建议数据格式标准指南 |
Standard Guide for Recommended Format of Wear Test Data Suitable for Databases |
| ASTM E 1006-2002 |
试验反应堆的物理放射量测定结果的分析和解释的标准实施规程,E 706(II) |
Standard Practice for Analysis and Interpretation of Physics Dosimetry Results for Test Reactors, E 706(II) |
| ASTM D 2633-2002 |
电线及电缆用热塑绝缘材料和护套的标准试验方法 |
Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable |
| ASTM A 598/A 598M-2002 |
磁放大器芯磁性的标准试验方法 |
Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores |
| ASTM A 599/A 599M-2002 |
锡轧制品.冷轧电解镀锡薄钢板的标准规范 |
Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet |
| ASTM E 1035-2002 |
核反应堆容器支承结构的中子辐照量测定标准实施规程 |
Standard Practice for Determining NeutronExposures for Nuclear Reactor Vessel Support Structures |
| ASTM D 4466-2002 |
多成分纺织纤维的标准术语 |
Standard Terminology for Multicomponent Textile Fibers |
| ASTM D 2489-2002 |
沥青混合料的颗粒包复度评定的标准实施规程 |
Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures |
| ASTM D 2492-2002 |
煤中硫的形状标准测试方法 |
Standard Test Method for Forms of Sulfur in Coal |
| ASTM E 1042-2002 |
镘刀抹涂或喷涂用的吸音材料的标准分类 |
Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray |
| ASTM E 1297-2002 |
通过铌的辐射活化测定快中子反应速率的标准试验方法 |
Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium |
| ASTM A 192/A 192M-2002 |
高压设备用无缝碳钢锅炉管标准规范 |
Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service |
| ASTM C 1214M-2002 |
负压(真空)试验法测定混凝土管下水道的标准试验方法(米制) |
Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method [Metric] |
| ASTM C 1214-2002 |
负压(真空)试验法测定混凝土管下水道的标准试验方法 |
Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method |
| ASTM E 2094-2002 |
彩色釉料使用寿命评定的标准实施规程 |
Standard Practice for Evaluating the Service Life of Chromogenic Glazings |
| ASTM D 714-2002 |
涂料起泡程度评价的标准试验方法 |
Standard Test Method for Evaluating Degree of Blistering of Paints |
| ASTM D 877-2002 |
用圆盘电极测定绝缘液体介电击穿电压的标准试验方法 |
Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes |
| ASTM E 1036-2002 |
使用标准电池的非聚能地面光电模件和阵列电气性能的标准试验方法 |
Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells |
| ASTM E 1801-2003 |
泡沫和梁型遮盖物用铝饰面板的粘结性的测定的标准实用规程 |
Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters |
| ASTM E 1800-2003 |
粘结泡沫中心夹层面板(160 华氏温度,高湿设备)的胶粘剂的标准规范.一型面板 |
Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels |
| ASTM D 6840-2002 |
按钮干洗效果的标准试验方法 |
Standard Test Method for Effect of Drycleaning on Buttons |
| ASTM D 6887-2003 |
测定醇酸与树脂或与树脂溶液兼容性的标准试验方法 |
Standard Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions |
| ASTM E 1186-2003 |
建筑物外层和空障系统漏气现场检测的标准实施规程 |
Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems |
| ASTM E 1555-2003 |
用于夹层板修补的结构胶粘剂标准规范 |
Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair |
| ASTM A 264-2003 |
包覆的不锈铬镍钢板规范 |
Specification for Stainless Chromium-Nickel Steel-Clad Plate |
| ASTM E 1794-2003 |
用于粘结泡沫中心夹层面板(200 华氏度,高湿设备)的胶粘剂的标准规范.二型面板 |
Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type II Panels |
| ASTM E 2194-2003 |
金属片状加色剂材料的多角度颜色测量标准实施规程 |
Standard Practice for Multiangle Color Measurement of Metal Flake Pigmented Materials |
| ASTM F 2237-2003 |
立式旺火烧烤装置性能的标准试验方法 |
Standard Test Method for Performance of Upright Overfired Broilers |
| ASTM F 2238-2003 |
快速烹调炉性能的标准试验方法 |
Standard Test Method for Performance of Rapid Cook Ovens |
| ASTM F 2239-2003 |
传送带式烧烤装置性能的标准试验方法 |
Standard Test Method for Performance of Conveyor Broilers |
| ASTM D 4986-2003 |
泡沫聚合材料水平燃烧特性的标准试验方法 |
Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials |
| ASTM D 5048-2003 |
利用125mm火焰测量固态塑料比较燃烧特性和抗烧穿性的标准试验方法 |
Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame |
| ASTM E 1005-2003 |
E706(ⅢA)反应堆压力容器监视用辐射测量监视器的应用和分析的标准试验方法 |
Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA) |
| ASTM D 6049-2003 |
通过平行板之间压力测定橡胶化合物和非含硫生橡胶黏性和弹性的橡胶特性的标准试验方法 |
Standard Test Method for Rubber Property - Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates |
| ASTM F 2282-2003 |
机械紧固件用碳钢和合金钢丝、杆材、棒材的质量保证要求的标准规范 |
Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners |
| ASTM D 4539-2003 |
用低温流动(LTFT)试验法测定柴油燃料可滤性的标准试验方法 |
Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT) |
| ASTM C 1530-2004 |
设计成可变轮廓和厚度的无石棉纤维水泥屋顶盖板、屋面板和石板的标准规范 |
Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses |
| ASTM A 31-2004 |
压力容器铆接用钢铆钉和铆接棒的标准规范 |
Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels |
| ASTM A 1016/A 1016Ma-2004 |
铁素体合金钢管、奥氏体合金钢管和不锈钢管一般要求的标准规范 |
Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes |
| ASTM C 1383-2004 |
用冲击回声法测量P波速度和混凝土板的厚度的标准试验方法 |
Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method |
| ASTM C 1402-2004 |
土壤样品的高分辨率γ射线光谱测定法的标准指南 |
Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples |
| ASTM C 1416-2004 |
用X射线荧光法分析天然水和废水中铀的标准试验方法 |
Standard Test Method for Uranium Analysis in Natural and Waste Water by X-Ray Fluorescence |
| ASTM C 1559-2004 |
玻璃纤维衬垫绝缘材料芯吸性测定的标准试验方法(飞行器类型) |
Standard Test Method for Determining Wicking of Glass Fiber Blanket Insulation (Aircraft Type) |
| ASTM A 632-2004 |
通用无缝和焊接奥氏体不锈钢管(小直径)标准规范 |
Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service |
| ASTM D 4537a-2004 |
核设施涂层工作检验人员的资格和认证考核程序确立的标准指南 |
Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating Work Inspection in Nuclear Facilities |
| ASTM D 7031-2004 |
木材-塑料复合产品的机械和物理性能的评估标准指南 |
Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products |
| ASTM D 3943-2004 |
新制氧化铝基催化剂中总钼量的标准试验方法 |
Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts |
| ASTM D 3955-2004 |
电绝缘清漆标准规范 |
Standard Specification for Electrical Insulating Varnishes |
| ASTM D 4029-2004 |
精整机织玻璃织物标准实施规程 |
Standard Specification for Finished Woven Glass Fabrics |
| ASTM A 688/A 688M-2004 |
焊接的奥氏体不锈钢给水加热器管用标准规范 |
Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes |
| ASTM F 309-2004 |
非冷冻航空航天推进剂液体取样的标准实施规程 |
Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants |
| ASTM F 1066-2004 |
乙烯类复合地板砖标准规范 |
Standard Specification for Vinyl Composition Floor Tile |
| ASTM F 1237-2004 |
商用多罐椭圆形连续输送型加热消毒洗碗机的标准规范 |
Standard Specification for Commercial Dishwashing Machines, Multiple-Tank, Continuous Oval-Conveyor Type, Heat Sanitizing |
| ASTM D 2412-2002 |
用平行板负荷法测定塑料管外负荷性能的标准试验方法 |
Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading |
| ASTM D 6794-2002 |
测定用不同水和长时间(6h)加热后对的发电机油渗透性影响的标准试验方法 |
Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6-h) Heating Time |
| ASTM D 6773-2002 |
利用锌基轴承环剪切试验机进行标准的剪切试验方法 |
Standard Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester |
| ASTM D 6774-2002 |
利用动态纱试验机测定织纹纱的夹和压缩特性的标准试验方法 |
Standard Test Method for Crimp and Shrinkage Properties for Textured Yarns Using a Dynamic Textured Yarn Tester |
| ASTM D 2194-2002 |
甲醛溶液浓缩的标准试验方法 |
Standard Test Method for Concentration of Formaldehyde Solutions |
| ASTM E 1054-2002 |
评价抗菌剂活力失效的标准试验方法 |
Standard Test Methods for Evaluation of Inactivators of Antimicrobial Agents |
| ASTM F 1504-2002 |
现有污水管和下水管修复用折叠式聚氯乙烯管的标准规范 |
Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation |
| ASTM F 1647a-2002 |
小型高尔夫球场用绿呢和运动场草皮根层混合物中有机物质含量的标准试验方法 |
Standard Test Methods for Organic Matter Content of Putting Green and Sports Turf Root Zone Mixes |
| ASTM D 6601-2002 |
用无转子剪切流变仪测量橡胶在固化和固化后动态特性的标准试验方法 |
Standard Test Method for Rubber Properties-Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer |
| ASTM B 870-2002 |
铜铍合金锻制和挤制合金的标准规范 |
Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510) |
| ASTM B 906-2002 |
压延镍和镍合金板材、薄板和带材的一般要求的标准规范 |
Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
| ASTM B 247a-2002 |
铝和铝合金压模锻件、手工锻件和轧制环形锻件的标准规范 |
Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings |
| ASTM D 5015-2002 |
电测法测定大气湿沉积物样品pH值的标准试验方法 |
Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination |
| ASTM D 5156-2002 |
周围环境、工作地点及室内空气中臭氧连续测量的标准试验方法(紫外线吸收) |
Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption) |
| ASTM B 690-2002 |
铁镍铬钼合金无缝管标准规范 |
Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube |
| ASTM E 537-2002 |
用差分扫描量热法测量化学用品热稳定性的标准试验方法 |
Standard Test Method for The Thermal Stability Of Chemicals By Differential Scanning Calorimetry |
| ASTM E 675-2002 |
可互换的圆锥接地旋塞阀和栓塞的标准规范 |
Standard Specification for Interchangeable Taper-Ground Stopcocks And Stoppers |
| ASTM E 727-2002 |
粒状载体与粒状农药的体积密度的标准试验方法 |
Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides |
| ASTM F 1041-2002 |
聚烯烃燃气压力管和管道的燃气排除的标准指南 |
Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing |
| ASTM D 2609-2002 |
聚乙烯(PE)塑料管用塑料制插入式配件的标准规范 |
Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe |
| ASTM D 2247-2002 |
涂层在100%相对湿度下耐水性的试验的标准操作规程 |
Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity |
| ASTM D 6811-2002 |
在快速流动条件下测定飞行器涡轮机燃料的热稳定性的标准试验方法 |
Standard Test Method for Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HiReTS Method)1, 2 |
| ASTM E 2122-2002 |
进行笼形双壳类软体动物现场生物鉴定的标准指南 |
Standard Guide for Conducting In-situ Field Bioassays With Caged Bivalves |
| ASTM D 6775-2002 |
测定纺织品厚边带、线带和饰带的拉伸和撕裂强度的标准试验方法 |
Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material |
| ASTM D 5891-2002 |
土工合成粘土衬的粘土成分流失的标准试验方法 |
Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners |
| ASTM/ISO 52116-2002 |
自带干藏γ射线辐射仪剂量测定的标准实施规范 |
Standard Practice for Dosimetry for a Self-Contained Dry-Storage Gamma-Ray Irradiator |
| ASTM E 854-2003 |
反应堆监测用固态径迹记录仪(SSTR)监视器的应用和分析的标准试验方法,E 706(IIIB) |
Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance, E706(IIIB) |
| ASTM D 6032-2002 |
测定岩石芯的岩石质量标号的标准试验方法 |
Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core |
| ASTM B 606-2002 |
钢芯铝和铝合金导线用高强度镀锌(电镀)钢芯线的标准规范 |
Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced |
| ASTM A 707/A 707M-2002 |
低温设备用锻制碳素钢和合金钢法兰的标准规范 |
Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service |
| ASTM A 719/A 719M-2002 |
磁性材料层压率的标准试验方法 |
Standard Test Method for Lamination Factor of Magnetic Materials |
| ASTM A 720/A 720M-2002 |
无定向电工钢延展性的标准试验方法 |
Standard Test Method for Ductility of Nonoriented Electrical Steel |
| ASTM D 5664-2002 |
评定阻燃处理和高温对阻燃处理木材强度性能的影响的标准试验方法 |
Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber |
| ASTM D 4373-2002 |
快速测定土壤中碳化钙含量的标准试验方法 |
Standard Test Method for Rapid Determination of Carbonate Content of Soils |
| ASTM D 5917-2002 |
用气相色谱法和外部校准法对单环芳香烃中微量杂质的标准试验方法 |
Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration |
| ASTM D 5644-2001 |
橡胶化合材料的标准试验方法.可回收硫化颗粒橡胶粒径分布测定 |
Standard Test Methods for Rubber Compounding Materials - Determination of Particle Size Distribution of Recylced Vulcanizate Particulate Rubber |
| ASTM E 1899-2002 |
利用与P-甲苯磺酰异氰酸盐(TSI)的反应和氢氧化四丁基铵的电势滴定法的羟基标准试验方法 |
Standard Test Method for Hydroxyl Groups Using Reaction with p-Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide |
| ASTM F 2203-2002 |
用精密钢尺进行线性测量的标准试验方法 |
Standard Test Method for Linear Measurement Using Precision Steel Rule |
| ASTM F 2204-2002 |
滨线响应技术描述用标准指南 |
Standard Guide for Describing Shoreline Response Techniques |
| ASTM F 2206-2002 |
熔接聚乙烯塑料管、配件、薄板、厚板或板坯的成品配件的标准规范 |
Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock |
| ASTM B 639-2002 |
高温用沉积硬化钴(UNS R30155 和 UNS R30816)合金条材、棒材、锻件和锻造坯定的标准规范 |
Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service |
| ASTM D 120a-2002 |
橡胶隔热手套的标准规范 |
Standard Specification for Rubber Insulating Gloves |
| ASTM D 1423-2002 |
直接计数法测定纱线捻数的标准试验方法 |
Standard Test Method for Twist in Yarns by Direct-Counting |
| ASTM A 710/A 710M-2002 |
沉淀硬化低碳镍-铜-铬-钼-铌合金结构钢板的标准规范 |
Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates |
| ASTM B 912-2002 |
用电抛光法测定不锈钢钝化的标准规范 |
Standard Specification for Passivation of Stainless Steels Using Electropolishing |
| ASTM D 1062-2002 |
金属之间胶粘剂粘结力抗裂强度的标准测试方法 |
Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds |
| ASTM B 306-2002 |
铜排水管(DWV)的标准规范 |
Standard Specification for Copper Drainage Tube (DWV) |
| ASTM E 264-2002 |
通过镍的辐射活化测定快中子反应速率的标准试验方法 |
Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel |
| ASTM B 61-2002 |
蒸气或阀门青铜铸件的标准规范 |
Standard Specification for Steam or Valve Bronze Castings |
| ASTM D 4493-2003 |
(4,4-二酚基丙烷)双酚A凝固点的标准试验方法 |
Standard Test Method for Solidification Point of Bisphenol A (4,4′-Isopropylidenediphenol) |
| ASTM B 62-2002 |
混合青铜或少量金属铸件标准规范 |
Standard Specification for Composition Bronze or Ounce Metal Castings |
| ASTM B 660-2002 |
铝及镁制品的封装/包装标准规范 |
Standard Practices for Packaging/Packing of Aluminum and Magnesium Products |
| ASTM C 1161c-2002 |
环境温度下高级陶瓷抗弯强度标准试验方法 |
Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature |
| ASTM D 5756-2002 |
用透射电子显微镜对尘埃中石棉质量浓度作微真空取样和间接分析的标准试验方法 |
Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Concentration |
| ASTM D 5874-2002 |
测定土壤冲击值的标准试验方法 |
Standard Test Method for Determination of the Impact Value (IV) of a Soil |
| ASTM B 632/B 632M-2002 |
铝合金轧制支撑板标准规范 |
Standard Specification for Aluminum-Alloy Rolled Tread Plate |
| ASTM D 3693-2002 |
标签标明的缝纫线每团长度的标准规范 |
Standard Specification for Labeled Length per Holder of Sewing Thread |
| ASTM D 3911-2003 |
设计基本事故(DBA)的模拟条件下评价轻水核电站用涂层的标准试验方法 |
Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions |
| ASTM D 6526-2003 |
毛细管柱气象色谱法分析甲苯的标准试验方法 |
Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography |
| ASTM B 621-2002 |
镍铁铬钼合金棒材标准规范 |
Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod |
| ASTM B 174-2002 |
电导线用成束绞捻的铜导线标准规范 |
Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors |
| ASTM B 582-2002 |
镍铬铁钼铜合金板、薄板及带材标准规范 |
Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip |
| ASTM D 6789-2002 |
用氙弧曝光装置进行打印纸和书写纸加速照明老化的标准试验方法 |
Standard Test Method for Accelerated Light Aging of Printing and Writing Paper by Xenon-Arc Exposure Apparatus |
| ASTM F 1105-2003 |
飞行器清洗剂制备的标准试验方法.对温度敏感的溶剂基液体清诘剂的储存稳定性试验 |
Standard Test Method for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing |
| ASTM F 1126-2003 |
食品电切刀标准规范 |
Standard Specification for Food Cutters (Electric) |
| ASTM D 6830-2002 |
可清洁的过滤器介质的压降和过滤特性表征的标准试验方法 |
Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media |
| ASTM D 2494-2002 |
纱线或人造纤维或纤维束货包的商业质量的标准试验方法 |
Standard Test Method for Commercial Mass of a Shipment of Yarn or Manufactured Staple Fiber or Tow |
| ASTM D 2644-2002 |
毛织品系统的细纱标准公差 |
Standard Tolerances for Yarns Spun on the Woolen System |
| ASTM D 3002-2002 |
塑料涂覆层评定的标准指南 |
Standard Guide for Evaluation of Coatings Applied to Plastics |
| ASTM F 2131-2002 |
使用W-20老鼠基质细胞系的重组体人骨形态形成蛋白-2(rhBMP-2)在实验室条件下的生物活性的标准试验方法 |
Standard Test Method forIn Vitro Biological Activity of Recombinant Human Bone Morphogenetic Protein-2 (rhBMP-2) Using the W-20 Mouse Stromal Cell Line |
| ASTM F 2181a-2002 |
外科植入物用锻造的无缝不锈钢管的标准规范 |
Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants |
| ASTM F 2182a-2002 |
磁共振成像时测量射频感应加热接近被动性植入物的标准试验方法 |
Standard Test Method for Measurement of Radio Frequency Induced Heating Near Passive Implants During Magnetic Resonance Imaging |
| ASTM F 2201-2002 |
通用打火机的消费者安全标准规范 |
Standard Consumer Safety Specification for Utility Lighters |
| ASTM A 262a-2002 |
探测奥氏体不锈钢晶间腐蚀敏感度的标准实施规范 |
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| ASTM E 337-2002 |
用干湿球湿度计测定湿度的标准试验方法(湿球和干球温度的测量) |
Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
| ASTM D 6284-2002 |
橡胶性能的标准试验方法.含氯和氯胺的水溶液的影响 |
Standard Test Method for Rubber Property - Effect of Aqueous Solutions with Available Chlorine and Chloramine |
| ASTM E 2238-2002 |
排气路径图解标准指南 |
Standard Guide for Evacuation Route Diagrams |
| ASTM E 1787-2002 |
离子色谱法测定苛性钠和苛性碱(氢氧化钠和氢氧化钾)中阴离子的标准试验方法 |
Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography |
| ASTM B 923-2002 |
用氦或氮比重瓶测定法测量金属粉末轮廓密度的标准试验方法 |
Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry |
| ASTM B 924-2002 |
具有整体散热叶片的冷凝器及热交换器用无缝及焊接镍合金管标准规范 |
Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins |
| ASTM SI 10-2002 |
使用国际单位制(SI)的IEEE/ASTM SI 10美国国家标准:现代米制体系 |
IEEE/ASTM SI 10 American National Standard for Use of the International System of Units (SI): The Modern Metric System |
| ASTM F 449-2002 |
农业排水或地下水位控制用聚乙烯波纹管地下安装的标准实施规范 |
Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control |
| ASTM D 3455-2002 |
施工材料同产自石油的电绝缘油可混用性的标准试验方法 |
Standard Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin |
| ASTM D 402-2002 |
稀释沥青产品蒸馏的标准试验方法 |
Standard Test Method for Distillation of Cut-Back Asphaltic (Bituminous) Products |
| ASTM D 4230-2002 |
用冷却表面冷凝(露点)湿度计测量湿度的标准试验方法 |
Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer |
| ASTM F 1871-2002 |
现有下水道和管线修复用A型折叠/成型聚氯乙烯管的标准规范 |
Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation |
| ASTM F 1887-2002 |
测量棒球和垒球回弹系数的标准试验方法 |
Standard Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs |
| ASTM F 1961a-2002 |
交联聚乙烯(PEX)管用带盘簧的金属机械冷扩口加压管件的标准规范 |
Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing |
| ASTM F 2217-2002 |
涂层/粘合剂重量测定标准实施规范 |
Standard Practice for Coating/Adhesive Weight Determination |
| ASTM A 848-2001 |
低碳磁铁的标准规范 |
Standard Specification for Low-Carbon Magnetic Iron |
| ASTM D 1329-2002 |
评定橡胶特性的标准试验方法.低温收缩(TR试验) |
Standard Test Method for Evaluating Rubber Property - Retraction at Lower Temperatures (TR Test) |
| ASTM D 1476-2002 |
磁漆溶剂的庚烷易混合性的标准试验方法 |
Standard Test Method for Heptane Miscibility of Lacquer Solvents |
| ASTM C 878/C 878M-2003 |
收缩补偿混凝土的约束膨胀性的标准试验方法 |
Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete |
| ASTM C 470/C 470Ma-2002 |
混凝土试验用垂直圆柱体铸模标准规范 |
Standard Specification for Molds for Forming Concrete Test Cylinders Vertically |
| ASTM C 937-2002 |
预置集料混凝土的灌浆流动机械的标准规范 |
Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete |
| ASTM C 938-2002 |
预置集料混凝土的灌浆混合物的配比的实施规范 |
Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete |
| ASTM C 941-2002 |
在实验室内进行预置集料混凝土灌浆混合料保水性试验的标准试验方法 |
Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory |
| ASTM D 3844-2002 |
卤化碳氢化合物溶剂容器的标记标准指南 |
Standard Guide for Labeling Halogenated Hydrocarbon Solvent Containers |
| ASTM D 3853-2003 |
与橡胶及橡胶胶乳相关合成化学药品的缩写方式的标准术语 |
Standard Terminology Relating to Rubber and Rubber Latices - Abbreviations for Chemicals Used in Compounding |
| ASTM D 6436-2002 |
塑料和热塑弹性体的报告特性的标准指南 |
Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers |
| ASTM D 1657-2002 |
用压力液体比重计测定轻烃类物质的密度或相对密度的标准试验方法 |
Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer |
| ASTM E 844-2003 |
反应堆监视用传感器装置设计和辐照的标准指南E-706(ⅡC) |
Standard Guide for Sensor Set Design and Irradiation for Reactor Surveillance, E 706(IIC) |
| ASTM C 888-2003 |
核纯级氧化钆(Gd203)粉末的标准规范 |
Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder |
| ASTM D 5200-2003 |
测定气溶胶瓶中溶剂型漆挥发物质重量百分比的标准试验方法 |
Standard Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans |
| ASTM E 481-2003 |
用钴和银的放射性测定中子积分通量率的标准试验方法 |
Standard Test Method for Measuring Neutron Fluence Rate by Radioactivation of Cobalt and Silver |
| ASTM F 2020a-2002 |
应急医疗服务系统(EMSS)救护车的设计、制造和采购的标准实施规范 |
Standard Practice for Design, Construction, and Procurement of Emergency Medical Services Systems (EMSS) Ambulances |
| ASTM E 2171-2002 |
垫子健康记录的相关额定尺度测量的标准实施规范 |
Standard Practice for Rating-Scale Measures Relevant to the Electronic Health Record |
| ASTM E 2212a-2002 |
保健合格证政策的标准实施规范 |
Standard Practice for Healthcare Certificate Policy |
| ASTM E 2247-2002 |
环境现场评估标准实施规范:林地或郊区用阶段1环境现场评估过程 |
Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process for Forestland or Rural Property |
| ASTM G 117-2002 |
用实验室间磨损和浸蚀试验数据计算和报告精密度的的标准指南 |
Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests |
| ASTM F 1503-2002 |
机器/加工能力分析程序的标准实施规程 |
Standard Practice for Machine/Process Capability Study Procedure |
| ASTM D 6039/D 6039M-2002 |
敞口和有盖的木板箱标准规范 |
Standard Specification for Crates, Wood, Open and Covered |
| ASTM D 6246-2002 |
评价扩散取样器性能的标准实施规范 |
Standard Practice for Evaluating the Performance of Diffusive Samplers |
| ASTM E 2243-2002 |
表面矿山改造用煤燃烧产品的使用标准指南:重新沿等高线修筑和改造 |
Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Re-contouring and Highwall Reclamation |
| ASTM D 2259-2002 |
纱线收缩性的标准试验方法 |
Standard Test Method for Shrinkage of Yarns |
| ASTM D 2668-2002 |
红外线吸收法测定电绝缘油中2,6-二叔丁基对甲酚和2,6-二叔丁基对苯酚的标准试验方法 |
Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption |
| ASTM B 802/B 802M-2002 |
钢芯铝导线(ASCR)用涂覆锌-5%铝-混合稀土合金钢芯线的标准规范 |
Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) |
| ASTM D 3018-2003 |
表面有矿物颗粒的A级沥青瓦的标准规范 |
Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules |
| ASTM E 1678-2002 |
火灾分析中测量烟气毒性的标准试验方法 |
Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis |
| ASTM F 1162-2002 |
撑杆跳高降落设备的标准规范 |
Standard Specification for Pole Vault Landing Systems |
| ASTM D 5460-2002 |
橡胶合成材料的标准试验方法.橡胶添加剂中的水 |
Standard Test Method for Rubber Compounding Materials-Water in Rubber Additives |
| ASTM D 3082-2003 |
水中硼的标准试验方法 |
Standard Test Method for Boron In Water |
| ASTM B 470-2002 |
电子设备连接线用的铜导线标准规范 |
Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment |
| ASTM D 4192-2003 |
原子吸收分光光度法对水中钾含量的标准试验方法 |
Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry |
| ASTM E 969-2002 |
玻璃体积(移液)管标准规范 |
Standard Specification for Glass Volumetric (Transfer) Pipets |
| ASTM F 1472a-2002 |
外科植入设备用锻制钛6铝4钒合金的标准规范(UNS R56400) |
Standard Specification for Wrought Titanium -6Aluminum -4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
| ASTM B 241/B 241M-2002 |
铝及铝合金无缝管和挤制管标准规范 |
Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
| ASTM G 87-2002 |
对金属进行潮湿二氧化硫(SO2)的腐蚀试验的标准实施规程 |
Standard Practice for Conducting Moist SO2 Tests |
| ASTM E 706-2002 |
E706(0)轻水反应堆压力容器监视标准的标准主模型 |
Standard Master Matrix for Light-Water Reactor Pressure Vessel Surveillance Standards, E706(0) |
| ASTM E 7-2003 |
与金相学相关的标准术语 |
Standard Terminology Relating to Metallography |
| ASTM C 939-2002 |
预置集料混凝土流浆的标准试验方法(流动锥法) |
Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method) |
| ASTM D 6842-2002 |
通过使用废物管理决策中评估的不确定性及其组成部分来设计成本-效率抽样和测量计划的标准指南 |
Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making |
| ASTM D 6814-2002 |
基于交联点密度的粒状生胶脱硫百分比测定的标准试验方法 |
Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density |
| ASTM D 6818-2002 |
草皮加强网基本拉伸特性的标准试验方法 |
Standard Test Method for Ultimate Tensile Properties of Turf Reinforcement Mats |
| ASTM D 6825-2002 |
抛石护坡堆放标准指南 |
Standard Guide for Placement of Riprap Revetments |
| ASTM D 235-2002 |
矿物溶剂油(石油溶剂油)(烃干洗溶剂)的标准规范 |
Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent) |
| ASTM D 6835-2002 |
热塑性弹性醚酯模塑和挤制材料的标准分类体系 |
Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE) |
| ASTM D 6898-2003 |
用喷油泵装置评价柴油润滑性的标准试验方法 |
Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig |
| ASTM F 1888-2002 |
棒球和垒球受压位移的试验方法 |
Test Method for Compression-Displacement of Baseballs and Softballs |
| ASTM E 287-2002 |
实验室玻璃分度滴定管的标准规范 |
Standard Specification for Laboratory Glass Graduated Burets |
| ASTM E 676-2002 |
可互换的圆锥形接头标准规范 |
Standard Specification for Interchangeable Taper-Ground Joints |
| ASTM F 1698-2002 |
排污管和管道修复用聚氯乙烯异型条衬里和水泥薄浆安装的标准实施规程 |
Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits |
| ASTM F 1865a-2002 |
交联聚乙烯管用带压缩套筒的机械冷膨胀插入配件的标准规范 |
Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing |
| ASTM D 6854-2003 |
硅石的标准试验方法.n-邻苯二甲酸二吸收值 |
Standard Test Method for Silica - n-Dibutyl Phthalate Absorption Number |
| ASTM D 4397-2002 |
建筑、工业和农业用聚乙烯薄板标准规范 |
Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications |
| ASTM F 2205-2002 |
漏油反应中化学分散剂使用的生态方面考虑的标准导则:热带环境 |
Standard Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response: Tropical Environments |
| ASTM F 2210-2002 |
组织工程医疗产品中使用的细胞、组织和器官处理的标准指南 |
Standard Guide for Processing Cells, Tissues, and Organs for Use in Tissue Engineered Medical Products |
| ASTM D 5467/D 5467M-1997 |
使用多层组合梁的单向聚合母体复合材料压缩特性的标准试验方法 |
Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam |
| ASTM F 670-2002 |
5和10加仑(20和40升)的润滑油配料容器的标准规范 |
Standard Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing |
| ASTM F 1038-2002 |
不带驱动搅拌装置的罐式手持通用真空吸尘器发动机寿命评定的试验方法 |
Standard Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator |
| ASTM F 136a-2002 |
外科植入设备用锻制钛6和铝4钒特低杂质合金的标准规范(UNS R56401) |
Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) |
| ASTM E 237-2002 |
实验室玻璃微量容器(量瓶和离心管)的标准规范 |
Standard Specification for Laboratory Glass Microvolumetric Vessels (Volumetric Flasks and Centrifuge Tubes) |
| ASTM D 6762a-2002 |
通过喷涂层的外观评价测定涂料遮盖能力的标准试验方法 |
Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings |
| ASTM B 313/B 313M-2002 |
铝和铝合金圆焊接管标准规范 |
Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes |
| ASTM F 903-2003 |
防护服材料耐液体渗透的标准试验方法 |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids |
| ASTM F 577-2003 |
干调色剂粒度测量的标准试验方法 |
Standard Test Method for Particle Size Measurement of Dry Toners |
| ASTM F 2236-2003 |
软的婴儿运载工具的消费者安全标准规范 |
Standard Consumer Safety Specification for Soft Infant Carriers |
| ASTM D 1756-2002 |
测定煤中二氧化碳的标准试验方法 |
Standard Test Method for Determination as Carbon Dioxide of Carbonate Carbon in Coal |
| ASTM D 2972-2003 |
水中砷的标准试验方法 |
Standard Test Methods for Arsenic in Water |
| ASTM D 4328-2003 |
微咸水、海水及盐水中硫酸钡、硫酸锶和无水硫酸钙(石膏)超饱和度计算的标准实施规程 |
Standard Practice for Calculation of Supersaturation of Barium Sulfate, Strontium Sulfate, and Calcium Sulfate Dihydrate (Gypsum) in Brackish Water, Seawater, and Brines |
| ASTM D 1508-2002 |
碳黑、球状细粒磨损的标准试验方法 |
Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
| ASTM D 1364-2002 |
挥发性溶剂中水的标准测试方法(费歇尔试剂滴定法) |
Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method) |
| ASTM D 1054-2002 |
用固特异摆锤式回弹性试验机测定橡胶弹性的标准试验方法 |
Standard Test Method for Rubber Property-Resilience Using a Goodyear-Healey Rebound Pendulum |
| ASTM G 28-2002 |
煅制富镍铬轴承合金晶间腐蚀敏感性的探测用标准试验方法 |
Standard Test Methods of Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys |
| ASTM D 1481-2002 |
用利普金双毛细管比重计测定粘性材料密度和相对密度(比重)的标准试验方法 |
Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer |
| ASTM D 4327-2003 |
用化学压缩离子色谱法对水中阴离子的标准试验方法 |
Standard Test Method for Anions in Water by Chemically Suppressed Ion Chromatography |
| ASTM D 1903-2003 |
爱斯开乐电解液和石油原油热澎涨系数的标准试验方法 |
Standard Test Method for Coefficient of Thermal Expansion of Electrical Insulating Liquids of Petroleum Origin, and Askarels |
| ASTM B 316/B 316M-2002 |
铆接和冷镦铝及铝合金线材与棒材标准规范 |
Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods |
| ASTM C 215-2002 |
混凝土试样的基本横向、纵向和扭转振动频率的标准试验方法 |
Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens |
| ASTM D 1748-2002 |
在湿润箱中用金属保护剂防止金属生锈的标准试验方法 |
Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet |
| ASTM D 2340-2003 |
苯乙烯单体中过氧化物的标准试验方法 |
Standard Test Method for Peroxides in Styrene Monomer |
| ASTM F 1089-2002 |
外科仪器腐蚀的标准试验方法 |
Standard Test Method for Corrosion of Surgical Instruments |
| ASTM E 1883-2002 |
用多盆洗涤技术评定抗菌手洗物的标准试验方法 |
Standard Test Method for Assessment of an Antibacterial Handwash Product by Multiple Basin Wash Technique |
| ASTM E 1998-2002 |
评定减压诱导的通风燃气用具回流和溢出的标准指南 |
Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances |
| ASTM E 2216-2002 |
核设施退役区混凝土处理方案的评估标准指南 |
Standard Guide for Evaluating Disposal Options for Concrete from Nuclear Facility Decommissioning |
| ASTM C 737-2002 |
煤矿粉化用石灰岩标准规范 |
Standard Specification for Limestone for Dusting of Coal Mines |
| ASTM F 2218-2002 |
计算机化系统用硬件工具的标准指南 |
Standard Guide for Hardware Implementation for Computerized Systems |
| ASTM F 897-2002 |
测量接骨用板和钉磨蚀的标准试验方法 |
Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws |
| ASTM G 105-2002 |
进行湿砂/橡胶轮磨蚀的标准试验方法 |
Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests |
| ASTM D 6133-2002 |
通过直接注入一气体色谱仪测定含溶剂和含水涂料、涂层、树脂和原材料中丙酮及甲基和丁基醋酸盐含量的标准试 |
Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph |
| ASTM B 308/B 308M-2002 |
铝合金6061-T6标准结构型材标准规范 |
Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles |
| ASTM E 330-2002 |
用统一静态气压差法测定外窗、门、天窗和幕墙结构性能的标准试验方法 |
Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference |
| ASTM F 1352-2002 |
固定刃的粗大尖形铁箭头的性能和安全标准的标准指南 |
Standard Guide for Fixed Blade Broadhead Performance and Safety Standards |
| ASTM F 2202-2002 |
缓煮炉和热食品储存盒标准规范 |
Standard Specification for Slow Cook/Hold Ovens and Hot Food Holding Cabinets |
| ASTM B 786a-2002 |
次级绝缘用19股单绞捻铝导线标准规范 |
Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation |
| ASTM B 804-2002 |
UNS N08367和UNS N08926焊接管标准规范 |
Standard Specification for UNS N08367 and UNS N08926 Welded Pipe |
| ASTM D 1557-2002 |
用修正作用力56000 ft-Ibf/ft(2700 KN-m/m3)测量土壤实验室压实特性的标准试验方法 |
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3(2,700 kN-m/m3)) |
| ASTM E 2201a-2002 |
煤燃烧产品的标准术语 |
Standard Terminology for Coal Combustion Products |
| ASTM B 247Ma-2002 |
铝和铝合金压模锻件、手工锻件和轧制环形锻件的标准规范(米制) |
Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric] |
| ASTM A 968/A 968M-1996 |
耐腐蚀和耐热设备用铬、铬镍和硅合金钢棒及型材的标准规范 |
Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service |
| ASTM D 4879-2002 |
岩石中大型地下巷道地质技术图绘制的标准指南 |
Standard Guide for Geotechnical Mapping of Large Underground Openings in Rock |
| ASTM D 4658-2003 |
水中亚硫酸盐离子的标准试验方法 |
Standard Test Method for Sulfide Ion in Water |
| ASTM D 6832-2002 |
用1,5-二苯卡巴肼离子色谱法和分光光度测定法测定工作场所气体中六价铬的标准试验方法 |
Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide |
| ASTM D 6834-2002 |
测定有机械泵分配器的包装的产品泄漏率的标准试验方法 |
Standard Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser |
| ASTM D 6845-2002 |
沉淀的水合硅石的标准试验方法.CTAB表面积 |
Standard Test Method for Silica, Precipitated, Hydrated - CTAB (Cetyltrimethylammonium Bromide) Surface Area |
| ASTM D 4839-2003 |
用紫外线法或过硫酸盐氧化法或同时使用两种方法以及红外线法检测水中总碳和有机碳的标准试验方法 |
Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection |
| ASTM D 4367-2002 |
气相色谱法测定烃溶剂中苯的标准试验方法 |
Standard Test Method for Benzene in Hydrocarbon Solvents by Gas Chromatography |
| ASTM C 943-2002 |
在实验室内进行预置集料混凝土的密度和强度试验用圆柱体和棱柱体制作试验的标准规范 |
Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory |
| ASTM C 1545-2002 |
用高密度搅拌器使颜料和其他材料散入水基悬浮液的实施规范 |
Practice for Dispersing Pigments and Other Materials into Water-Based Suspensions with a High Intensity Mixer |
| ASTM D 117-2002 |
产自石油的电绝缘油的抽样、试验方法和规范的的标准导则 |
Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Oils of Petroleum Origin |
| ASTM D 1401-2002 |
石油润滑油与合成燃料的水分离特性的标准试验方法 |
Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM B 359/B 359M-2002 |
具有整体散热叶片的冷凝器及热交换器用无缝铜和铜合金管标准规范 |
Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins |
| ASTM B 398/B 398M-2002 |
电气用铝合金6201-T81线的标准规范 |
Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes |
| ASTM B 581-2002 |
镍铬铁钼铜合金棒标准规范 |
Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod |
| ASTM C 1546-2002 |
隐蔽式天花板辐射加热系统中石膏制品安装的标准指南 |
Standard Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems |
| ASTM C 580-2002 |
耐化学侵蚀的灰浆、簿浆及整体面层和聚脂混凝土的挠性强度和弹性模数的标准测试方法 |
Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes |
| ASTM C 868-2002 |
防护衬里耐化学侵蚀性的标准试验方法 |
Standard Test Method for Chemical Resistance of Protective Linings |
| ASTM B 815-2002 |
钴铬镍钼钨合金杆标准规范 |
Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod |
| ASTM B 821-2002 |
粒度分析用金属粉末和相关化合物的液体分散标准指南 |
Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis |
| ASTM F 1551-2003 |
铺有合成草皮的运动场表面和材料综合特性的标准试验方法 |
Standard Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials |
| ASTM D 4752-2003 |
用溶剂擦试法测定硅酸乙酯(无机)富锌底漆耐甲乙酮的标准试验方法 |
Standard Test Method for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub |
| ASTM D 5770-2002 |
用十六倍显微镜测量氧化试验中润滑油酸值的标准试验方法 |
Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing |
| ASTM D 5966-2002 |
评定轻型柴油发动机中滚轮从动杆防磨损用发动机油的标准试验方法 |
Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine |
| ASTM D 2930-2003 |
电位滴定法测定马来酐中马来酸含量的标准试验方法 |
Standard Test Method for Maleic Acid in Maleic Anhydride by Potentiometric Titration |
| ASTM E 1488-2002 |
研制和运用ASTM试验方法用的统计程序的标准指南 |
Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods |
| ASTM E 1490-2003 |
皮肤对脂膏及洗剂的感觉描述性分析的标准实施规程 |
Standard Practice for Descriptive Skinfeel Analysis of Creams and Lotions |
| ASTM D 1229-2003 |
橡胶特性的标准试验方法.低温时的压缩永久变形 |
Standard Test Method for Rubber Property - Compression Set at Low Temperatures |
| ASTM F 2232-2003 |
从鞋靴上除去高跟所要求的纵向负荷测定的标准试验方法 |
Standard Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear |
| ASTM F 2264-2003 |
无动力装置的小型摩托车的消费者安全标准规范 |
Standard Consumer Safety Specification for Non-Powered Scooters |
| ASTM F 335-2003 |
与静电复印相关的标准术语 |
Standard Terminology Relating to Electrostatic Copying |
| ASTM A 723/A 723M-2002 |
高强度压力元件用合金钢锻件的标准规范 |
Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application |
| ASTM C 670-2003 |
制定建筑材料试验方法用精密度和偏差说明的标准实施规程 |
Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials |
| ASTM C 597-2002 |
对通过混凝土的脉冲速度的标准试验方法 |
Standard Test Method for Pulse Velocity Through Concrete |
| ASTM C 475/C 475M-2002 |
精修石膏板用添缝混合料和填缝带料标准规范 |
Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board |
| ASTM D 217-2002 |
润滑脂锥头针入度的标准试验方法 |
Standard Test Methods for Cone Penetration of Lubricating Grease |
| ASTM D 2168a-2002 |
实验室机械捣实土壤压实器校准的标准试验方法 |
Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors |
| ASTM F 1812-2002 |
测定薄膜开关ESD屏蔽有效性的标准试验方法 |
Standard Test Method for Determining the Effectiveness of Membrane Switch ESD Shielding |
| ASTM E 2009-2002 |
用差别扫描热量测定法测定烃类氧化开始温度的标准试验方法 |
Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry |
| ASTM F 3a-2002 |
电子管用镍带标准规范 |
Standard Specification for Nickel Strip for Electron Tubes |
| ASTM A 901-2003 |
半成品型非晶形磁芯合金的标准规范 |
Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types |
| ASTM D 4863-2002 |
测定二冲程循环汽油发动机润滑剂润滑性的标准试验方法 |
Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants |
| ASTM D 1698-2003 |
现用的老化绝缘油中沉淀物与可溶性油泥的标准试验方法 |
Standard Test Method for Sediments and Soluble Sludge in Service-Aged Insulating Oils |
| ASTM D 1712-2003 |
塑料抗硫化物污染的标准操作规程 |
Standard Practice for Resistance of Plastics to Sulfide Staining |
| ASTM D 6848-2002 |
用作屋顶防护层的铝着色乳化沥青的标准规范 |
Standard Specification for Aluminum Pigmented Emulsified Asphalt Used as a Protective Coating for Roofing |
| ASTM D 6856-2003 |
纤维增强"纺织"复合材料测试的标准指南 |
Standard Guide for Testing Fabric-Reinforced "Textile" Composite Materials |
| ASTM D 850-2003 |
工业芳烃及相关物质蒸馏的标准试验方法 |
Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials |
| ASTM D 5145-2003 |
电泳涂漆液非挥发物质和颜料含量的标准试验方法 |
Standard Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths |
| ASTM D 873-2002 |
航空燃料氧化稳定性的标准试验方法(潜在残留物方法) |
Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method) |
| ASTM D 6857-2003 |
自动真空密封法测定沥青铺面混合料最大比重和密度的标准试验方法 |
Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method |
| ASTM D 5768-2002 |
妥尔油脂肪酸碘值测定的标准试验方法 |
Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids |
| ASTM D 4219-2002 |
化学灌浆土壤无侧限抗压强度指数的标准试验方法 |
Standard Test Method for Unconfined Compressive Strength Index of Chemical-Grouted Soils |
| ASTM E 1184-2002 |
电热(石墨加热炉)原子吸收分析的标准实施规程 |
Standard Practice for Electrothermal (Graphite Furnace) Atomic Absorption Analysis |
| ASTM E 1277-2002 |
用ICP发射光谱测定法对锌-5%铝-铈合金作化学分析的标准试验方法 |
Standard Test Method for Chemical Analysis of Zinc-5% Aluminum-Mischmetal Alloys by ICP Emission Spectrometry |
| ASTM D 4674a-2002 |
暴露在室内办公室环境下的塑料颜色稳定性加速试验的标准实施规范 |
Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments |
| ASTM F 1842-2002 |
测定薄膜开关的塑料基质上油墨或涂层粘附的标准试验方法 |
Standard Test Method for Determining Ink or Coating Adhesion on Plastic Substrates for Membrane Switch Applications |
| ASTM F 2114-2002 |
薄膜开关的ASTM标准试验方法、标准实施规范和典型值的标准指南 |
Standard Guide for ASTM Standard Test Methods, Standard Practices, and Typical Values of a Membrane Switch |
| ASTM D 6852-2002 |
材料和产品的生物基含量、资源消耗和对环境影响情况测定的标准导则 |
Standard Guide for Determination of Biobased Content, Resources Consumption, and Environmental Profile of Materials and Products |
| ASTM D 6851-2002 |
活性碳测定接触PH值的标准试验方发 |
Standard Test Method for Determination of Contact pH with Activated Carbon |
| ASTM D 6849-2002 |
液化石油气试验方法用样品罐中液化石油气的储存和使用的标准实施规范 |
Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods |
| ASTM D 6829-2002 |
青年女子身体测量的标准表格.尺寸0-19 |
Standard Tables of Body Measurements for Juniors, Sizes 0 to 19 |
| ASTM E 2253-2003 |
差示扫描量热计的焓测量有效性的标准方法 |
Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters |
| ASTM E 1938-2002 |
用二安替比林甲烷分子吸收光谱测定法测定镍合金中钛含量的标准试验方法 |
Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption Spectrometric Method |
| ASTM E 1984-2003 |
褐土持续再开发过程的标准指南 |
Standard Guide for Process of Sustainable Brownfields Redevelopment |
| ASTM D 4597-2003 |
用固体吸附剂扩散采样器从工作场所大气中采集气体或蒸气的标准实施规程 |
Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers |
| ASTM F 2257-2003 |
外科植入物用锻造无缝或焊接和拉拔18铬-14镍-2.5钼不锈钢小直径管的标准规范(UNS S31673) |
Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673) |
| ASTM F 2233-2003 |
现有污水管中光纤网络的安全性、使用权限、建造、义务和风险管理的标准指南 |
Standard Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers |
| ASTM F 316-2003 |
用起泡点和气孔平均流量法测定膜过滤器孔隙尺寸特点的标准试验方法 |
Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test |
| ASTM F 1185-2003 |
外科植入物用羟基磷灰石构成的标准规范 |
Standard Specification for Composition of Hydroxylapatite for Surgical Implants |
| ASTM D 2509-2003 |
润滑脂负载能力的标准试验方法(泰姆肯法) |
Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method) |
| ASTM D 2097-2003 |
家具皮革表层挠曲测试的标准试验方法 |
Standard Test Method for Flex Testing of Finish on Upholstery Leather |
| ASTM D 6417-2003 |
用毛细管气相色谱法评定发动机油挥发性的标准试验方法 |
Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography |
| ASTM D 6881-2003 |
按散装度分类的标准塑料工业散装箱/托盘装置规格的标准分类 |
Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density |
| ASTM D 6900-2003 |
将乳胶涂料湿粘合到光泽醇酸磁漆底层的标准试验方法 |
Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate |
| ASTM E 1917-2002 |
用双氧钒磷钼酸盐分子吸收光谱测定法测定镍、镍铁和镍合金中磷含量的标准试验方法 |
Standard Test Method for Determination of Phosphorous in Nickel, Ferronickel, and Nickel Alloys by the Phosphovanadomolybdate Molecular Absorption Spectrometric Method |
| ASTM A 867-2003 |
继电器用硅钢标准规范 |
Standard Specification for Iron-Silicon Relay Steels |
| ASTM D 964-2003 |
防污漆用金属铜粉的标准规范 |
Standard Specification for Metallic Copper Powder for Use in Antifouling Paints |
| ASTM D 689-2003 |
纸张的耐内部撕裂的标准试验方法 |
Standard Test Method for Internal Tearing Resistance of Paper |
| ASTM D 70-2003 |
半固态沥青材料比重和密度的标准试验方法(比重瓶法) |
Standard Test Method for Specific Gravity and Density of Semi-Solid Bituminous Materials (Pycnometer Method) |
| ASTM D 779-2003 |
用干烧指示器法测定纸、纸板和其他片材耐水性的标准试验方法 |
Standard Test Method for Water Resistance of Paper, Paperboard, and Other Sheet Materials by the Dry Indicator Method |
| ASTM E 865-2003 |
蜂窝夹层板用结构薄膜粘结剂的标准规范 |
Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels |
| ASTM F 1808-2003 |
水上舰艇重量控制技术要求的标准指南 |
Standard Guide for Weight Control Technical Requirements for Surface Ships |
| ASTM F 2106-2003 |
装有电动机的人力蹋车设计和性能特征评定的标准试验方法 |
Standard Test Methods for Evaluating Design and Performance Characteristics of Motorized Treadmills |
| ASTM D 913-2003 |
评价路标漆耐磨程度的标准试验方法 |
Standard Test Method for Evaluating Degree of Resistance to Wear of Traffic Paint |
| ASTM D 6874-2003 |
利用横向振动无损评定木基受弯构件的标准试验方法 |
Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration |
| ASTM D 6875-2003 |
用热敏电阻测定工业用有机化学品凝固点的标准试验方法 |
Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor |
| ASTM F 2003-2002 |
空气中a－射线辐射后的超高分子重量聚乙烯加速老化的标准实施规程 |
Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air |
| ASTM F 2011-2002 |
游乐车安全和性能的标准规范 |
Standard Specification for Safety and Performance of Fun-Karts |
| ASTM D 4016-2002 |
用布鲁克菲尔德粘度计测定化学灌浆粘度的标准试验方法(实验法) |
Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method) |
| ASTM D 2140-2003 |
石油制绝缘油的碳类组分的标准试验方法 |
Standard Test Method for Carbon-Type Composition of Insulating Oils of Petroleum Origin |
| ASTM D 5104-2002 |
纺织纤维收缩的标准试验方法(单纤维试验) |
Standard Test Method for Shrinkage of Textile Fibers (Single-Fiber Test) |
| ASTM D 5179-2002 |
直接抗拉试验测定有机涂层和塑料基质的粘着力的标准试验方法 |
Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing |
| ASTM D 4858-2002 |
测定润滑油对改进二冲程循环汽油发动机预燃倾向的标准试验方法 |
Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines |
| ASTM D 4952-2002 |
燃料和溶剂中活性硫磺类物质的定量分析的标准试验方法(含硫试验) |
Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test) |
| ASTM F 2227-2002 |
CO2示踪气体法对不密封的及空的医用包装盘泄漏性进行无损检测的标准试验方法 |
Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Medical Packaging Trays by CO2 Tracer Gas Method |
| ASTM D 6718-2002 |
委员会D13书写标准的标准实施规范 |
Standard Practice for Writing Committee D 13 Standards |
| ASTM A 2-2002 |
平型、带槽和防护型碳素钢平底轨道的标准规范 |
Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types |
| ASTM G 98-2002 |
材料耐磨损性的标准试验方法 |
Standard Test Method for Galling Resistance of Materials |
| ASTM D 2007-2003 |
粘土凝胶吸附色谱法测定橡胶填充剂和加工油及其他石油衍生油的特性组的标准试验方法 |
Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method |
| ASTM F 2228-2002 |
CO2示踪气体法对用多孔防渗透材料的包装泄漏性进行无损检测的标准试验方法 |
Standard Test Method for Non-Destructive Detection of Leaks in Medical Packaging Which Incorporates Porous Barrier Material by CO2 Tracer Gas Method |
| ASTM F 2226-2003 |
印刷品和叠层胶片粘合力测定的标准规范 |
Standard Practice for Determining the Adhesion of Prints and Laminating Films |
| ASTM F 1561-2003 |
户外用塑料椅子标准性能要求 |
Standard Performance Requirements for Plastic Chairs for Outdoor Use |
| ASTM D 5333-2003 |
测量土壤塌陷趋势的标准试验方法 |
Standard Test Method for Measurement of Collapse Potential of Soils |
| ASTM D 5325-2003 |
测定水基型(压力罐装)喷雾涂料中挥发物重量百分比的标准试验方法 |
Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints |
| ASTM D 4546-2003 |
粘性土的单维膨胀或沉降趋势的标准试验方法 |
Standard Test Methods for One-Dimensional Swell or Settlement Potential of Cohesive Soils |
| ASTM D 4564b-2002 |
套筒法测定现场土壤密度的标准试验方法 |
Standard Test Method for Density of Soil in Place by the Sleeve Method |
| ASTM D 3829-2002 |
预测发动机油边界泵送温度的标准试验方法 |
Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil |
| ASTM D 4376-2002 |
蒸汽脱脂等级全氯乙烯的标准规范 |
Standard Specification for Vapor-Degreasing Grade Perchloroethylene |
| ASTM D 4570-2002 |
橡胶加工用化学药品的标准试验方法:筛分法(干法)测定硫的粒度 |
Standard Test Method for Rubber Chemicals - Determination of Particle Size of Sulfur by Sieving (Dry) |
| ASTM D 4620-2002 |
评估橡胶中氧化锌的有效表面积的标准试验方法 |
Standard Test Method for Evaluating the Effective Surface Area of Zinc-Oxide in Rubber |
| ASTM D 6847-2002 |
从沥青混合料中定量萃取和回收沥青粘合剂的标准试验方法 |
Standard Test Method for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures |
| ASTM E 2121-2003 |
在已有的低层住宅建筑中安装氡减缓系统的标准实施规程 |
Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings |
| ASTM D 5422-2003 |
用螺杆挤压毛细管流变仪测量热塑性塑料性能的标准试验方法 |
Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer |
| ASTM D 5435-2003 |
植物生长和食物链保护用的土壤鉴定试验的标准试验方法 |
Standard Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection |
| ASTM D 5197-2003 |
测定空气中甲醛和其他羰基化合物的标准试验方法(快速取样法) |
Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology) |
| ASTM B 150/B 150M-2003 |
铝青铜杆材、棒材和型材标准规范 |
Standard Specification for Aluminum Bronze Rod, Bar, and Shapes |
| ASTM A 811-2003 |
粉末冶金技术制造的软磁铁部件的标准规范 |
Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques |
| ASTM C 862-2002 |
浇铸法制备耐火混凝土样件的标准实施规程 |
Standard Practice for Preparing Refractory Concrete Specimens by Casting |
| ASTM C 865-2002 |
耐火混凝土样件燃烧试验的标准实施规程 |
Standard Practice for Firing Refractory Concrete Specimens |
| ASTM E 563-2002 |
作为参考温度的冰点浴的制备和使用的标准规程 |
Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature |
| ASTM B 29-2003 |
精炼铅标准规范 |
Standard Specification for Refined Lead |
| ASTM B 456-2003 |
铜+镍+铬及镍+铬的电解沉积镀层标准规范 |
Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium |
| ASTM B 749-2003 |
铅和铅合金带材、薄板和板材产品标准规范 |
Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products |
| ASTM B 779-2003 |
钢筋加强的异型钢丝致密同芯绞捻铝导线标准规范 |
Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW) |
| ASTM B 817-2003 |
粉末冶金(P/M)钛合金结构元件标准规范 |
Standard Specification for Powder Metallurgy (P/M) Titanium Alloy Structural Components |
| ASTM E 1091-2003 |
防护板用非金属蜂窝芯子标准规范 |
Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels |
| ASTM D 6196-2003 |
空气中挥发性有机化合物用吸附剂、取样和热解吸分析方法选择的标准实施规程 |
Standard Practice for Selection of Sorbents, Sampling, and Thermal Desorption Analysis Procedures for Volatile Organic Compounds in Air |
| ASTM D 6335b-2003 |
用热氧化机油模拟试验测定高温沉积物的标准试验方法 |
Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test |
| ASTM D 6951-2003 |
浅层路面上使用的动力圆锥触探仪的标准试验方法 |
Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications |
| ASTM E 2186a-2002 |
用彗星分析法测定真核细胞中DNA单线损伤的标准指南 |
Standard Guide for Determining DNA Single-Strand Damage in Eukaryotic Cells Using the Comet Assay |
| ASTM D 3839-2002 |
玻璃纤维增强热固树脂管地下安装的标准指南 |
Standard Guide for Underground Installation of "Fiberglass" (Glass-FiberReinforced Thermosetting-Resin) Pipe |
| ASTM D 3513-2002 |
人造短纤维中超长纤维含量的标准测试方法 |
Standard Test Method for Overlength Fiber Content of Manufactured Staple Fiber |
| ASTM D 3558-2003 |
水中钴含量的标准测试方法 |
Standard Test Methods for Cobalt in Water |
| ASTM F 2275-2003 |
打猎器具生产商质量保证计划的标准实施规程 |
Standard Practice for Treestand Manufacturer Quality Assurance Program |
| ASTM F 2277-2003 |
选择强度设备的设计和性能特征评定的标准试验方法 |
Standard Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment |
| ASTM D 511-2003 |
水中钙镁离子的标准测试方法 |
Standard Test Methods for Calcium and Magnesium In Water |
| ASTM A 313/A 313M-2003 |
不锈钢弹簧丝的标准规范 |
Standard Specification for Stainless Steel Spring Wire |
| ASTM E 2179-2003 |
地板覆盖物在降低穿过混凝土地面传播的碰撞声音效果的实验室测量的标准试验方法 |
Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors |
| ASTM D 3913-2003 |
碱性铬鞣革液中酸度的标准试验方法 |
Standard Test Method for Acidity in Basic Chromium Tanning Liquors |
| ASTM G 173-2003 |
参考太阳光谱辐照度的标准表:37斜面上直接垂直和半球状 |
Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface |
| ASTM F 2259-2003 |
用质子核磁共振(1H NMR)光谱法测定蛋白藻蛋白酸盐的化学成分和顺序的标准试验方法 |
Standard Test Method for Determining the Chemical Composition and Sequence in Alginate by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy |
| ASTM F 2249-2003 |
断电电源线和设备用临时接地跨接组件的运行中试验方法的标准规范 |
Standard Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment |
| ASTM D 3798-2003 |
气相色谱法分析对二甲苯的标准试验方法 |
Standard Test Method for Analysis of p-Xylene by Gas Chromatography |
| ASTM D 4883-2003 |
用超声波技术测定聚乙烯密度的标准试验方法 |
Standard Test Method for Density of Polyethylene by the Ultrasound Technique |
| ASTM D 4919-2003 |
危险物质包装件试验的标准规范 |
Standard Specification for Testing of Hazardous Materials Packagings |
| ASTM E 2275-2003 |
水可混金属加工液体抗生物作用和抗微生物杀菌剂性能评定的标准实施规程 |
Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
| ASTM E 2277-2003 |
煤灰建筑填充件的设计和制造的标准指南 |
Standard Guide for Design and Construction of Coal Ash Structural Fills |
| ASTM E 2279-2003 |
确立财产管理原理导则的标准实施规程 |
Standard Practice for Establishing the Guiding Principles of Property Management |
| ASTM A 852/A 852M-2003 |
最小屈服强度为70ksi(485MPa)厚度为4英寸(100mm)的经淬火和回火的低合金结构钢板标准规范 |
Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick |
| ASTM D 6873-2003 |
显示聚合物混合叠层板的疲劳响应的标准实用规程 |
Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates |
| ASTM G 171-2003 |
用金刚石触针测定材料划痕硬度的标准试验方法 |
Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus |
| ASTM G 172-2003 |
加速使用寿命数据统计分析的标准指南 |
Standard Guide for Statistical Analysis of Accelerated Service Life Data |
| ASTM D 6142-2003 |
用毛细管气相色谱法分析苯酚的标准试验方法 |
Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography |
| ASTM D 1676-2003 |
带绝缘薄膜的磁性导线的标准试验方法 |
Standard Test Methods for Film-Insulated Magnet Wire |
| ASTM/ISO 5366-1-2000 |
麻醉和呼吸设备.气管造口术用管.第1部分:成人用管和连接件 |
Anaesthetic and Respiratory Equipment - TracheostomyTubes - Part 1: Tubes and Connectors for Use in Adults |
| ASTM D 6113-2003 |
用锥形量热计对电缆或光缆中绝缘材料的着火试验反应特性测定的标准试验方法 |
Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables |
| ASTM F 2260-2003 |
用质子核磁共振(1H NMR)光谱法测定脱乙酰壳多糖盐的脱乙酰作用程度的标准试验方法 |
Standard Test Method for Determining Degree of Deacetylation in Chitosan Salts by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy |
| ASTM F 2266-2003 |
测试营救系统和部件附属人员和设备的标准规范 |
Standard Specification for Masses Used in Testing Rescue Systems and Components |
| ASTM F 2268-2003 |
自行车序列号的标准规范 |
Standard Specification for Bicycle Serial Numbers |
| ASTM D 5895-2003 |
用机械式记录器评定有机涂层在薄膜成形期间干燥或固化的标准试验方法 |
Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders |
| ASTM D 6064-2003 |
HFC-227ea、1,1,1,2,3,3,3-七氟丙烷(CF3 CHFCF3)的标准规范 |
Standard Specification for HFC-227ea, 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3) |
| ASTM/ISO 51631-2003 |
电子束剂量测定和常规剂量仪校准用量热剂量测定系统使用的标准实施规程 |
Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Routine Dosimeter Calibration |
| ASTM D 6127-2003 |
HFC-23(三氟甲烷、CHF3)的装卸、运输和储存的标准实施规程 |
Standard Practice for Handling, Transportation, and Storage of HFC-23 (Trifluoromethane, CHF3) |
| ASTM C 1054-2003 |
压制和干燥耐火塑料及夯实混合样件的标准实施规程 |
Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens |
| ASTM B 925-2003 |
粉末冶金(P/M)试样的生产、制备的标准实施规程 |
Standard Practices for Production and Preparation of Powder Metallurgy (P/M) Test Specimens |
| ASTM D 1253-2003 |
水中残余氯的标准测试方法 |
Standard Test Method for Residual Chlorine in Water |
| ASTM C 1492-2003 |
混凝土屋面瓦的标准规范 |
Standard Specification for Concrete Roof Tile |
| ASTM D 3859-2003 |
水中硒含量的标准测试方法 |
Standard Test Methods for Selenium in Water |
| ASTM A 817-2003 |
链接围栏网和制成波状抗拉金属线用金属涂覆钢丝标准规范 |
Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire |
| ASTM A 827/A 827M-2002 |
锻造及类似用途的碳素钢板的标准规范 |
Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications |
| ASTM C 1347-2002 |
分析用铀材料制备和溶解的标准实施规程 |
Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis |
| ASTM E 2285-2003 |
机械支票填写机印记检验的标准指南 |
Standard Guide for Examination of Mechanical Checkwriter Impressions |
| ASTM C 1432-2003 |
测定钚中杂质的标准试验方法:酸溶解、离子交换矩阵分离和感应耦合等离子体-原子发射光谱法(ICP/AES)分析 |
Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis |
| ASTM D 4289-2003 |
润滑脂及润滑液与弹性材料的配伍性的标准试验方法 |
Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids |
| ASTM E 2287-2003 |
单击薄膜色带和打印文本上断裂字模和纸纤维印记检验的标准指南 |
Standard Guide for Examination of Fracture Patterns and Paper Fiber Impressions on Single-Strike Film Ribbons and Typed Text |
| ASTM E 2288-2003 |
法庭文件检验中纸的切割、撕裂和打孔的物理匹配的标准指南 |
Standard Guide for Physical Match of Paper Cuts, Tears, and Perforations in Forensic Document Examinations |
| ASTM D 5901-2003 |
航空燃料凝固点的标准试验方法(自动光学方法) |
Standard Test Method for Freezing Point of Aviation Fuels (Automated Optical Method) |
| ASTM D 5907-2003 |
水中可过滤和不可过滤物质的标准测试方法 |
Standard Test Method for Filterable and Nonfilterable Matter in Water |
| ASTM D 5960-2003 |
工业品位的二氯化乙烯的标准规范 |
Standard Specification for Technical Grade Ethylene Dichloride |
| ASTM D 5395-2003 |
回收二氯甲烷的标准规范 |
Standard Specification for Reclaimed Methylene Chloride |
| ASTM D 2978-2003 |
已加工泥炭材料体积的标准测试方法 |
Standard Test Method for Volume of Processed Peat Materials |
| ASTM D 3213-2003 |
海底原始松软积土的搬运、储藏和制备标准实施规程 |
Standard Practices for Handling, Storing, and Preparing Soft Undisturbed Marine Soil |
| ASTM D 3352-2003 |
微咸水、海水和盐水中锶离子含量的标准测试方法 |
Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines |
| ASTM B 927-2003 |
黄铜杆材、棒材和型材的标准规范 |
Standard Specification for Brass Rod, Bar, and Shapes |
| ASTM D 1183-2003 |
胶粘剂耐周期性实验室老化条件的标准试验方法 |
Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions |
| ASTM D 1623-2003 |
硬质泡沫塑料张力和张力粘合性能的标准试验方法 |
Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics |
| ASTM D 6942-2003 |
碱性环境中纤维素纤维稳定性的标准试验方法 |
Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments |
| ASTM D 6944-2003 |
硫化涂层耐热循环的标准试验方法 |
Standard Test Method for Resistance of Cured Coatings to Thermal Cycling |
| ASTM D 6953-2003 |
用液相色谱法(LC)测定聚乙烯中抗氧化剂和Erucamide Slip添加剂的标准试验方法 |
Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC) |
| ASTM E 1078-2002 |
表面分析中试样制备和安装程序的标准指南 |
Standard Guide for Specimen Preparation and Mounting in Surface Analysis |
| ASTM E 1131-2003 |
用热解重量分析法进行成分分析的标准试验方法 |
Standard Test Method for Compositional Analysis by Thermogravimetry |
| ASTM E 1161-2003 |
半导体和电子元件放射性检验的标准试验方法 |
Standard Test Method for Radiologic Examination of Semiconductors and Electronic Components |
| ASTM E 1180-2003 |
宏观结构检验用硫印准备的标准实施规范 |
Standard Practice for Preparing Sulfur Prints for Macrostructural Examination |
| ASTM D 6877-2003 |
排放到工作场所中的柴油粒子监测的标准试验方法 |
Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace |
| ASTM B 620-2003 |
镍铁铬钼合金板、薄板及带材标准规范 |
Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip |
| ASTM B 739-2003 |
钼铁铬硅合金焊接管标准规范 |
Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube |
| ASTM C 1195-2003 |
建筑用铸石的吸收性标准试验方法 |
Standard Test Method for Absorption of Architectural Cast Stone |
| ASTM C 1211-2002 |
高温下高级陶瓷抗弯强度的标准试验方法 |
Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures |
| ASTM E 2294-2003 |
用火试金重量分析法验证含金属矿物、浓缩物及相关材料中银修正值的标准实施规范 |
Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates and Related Materials by Fire Assay Gravimetry |
| ASTM E 2295-2003 |
用炉渣和灰吹盘中的银测定法在含金属矿物、浓缩物及相关冶金材料的分析中测定火试金法银修正值的标准实施规 |
Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels |
| ASTM D 3771-2003 |
聚集型太阳能加热器用橡胶密封件的标准规范 |
Standard Specification for Rubber Seals Used in Concentrating Solar Collectors |
| ASTM F 2251-2003 |
柔性包装材料厚度测量的标准试验方法 |
Standard Test Method for Thickness Measurement of Flexible Packaging Material |
| ASTM B 223-2003 |
恒温金属弹性模量的标准试验方法(悬臂梁法) |
Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method) |
| ASTM B 880-2003 |
镍、镍合金及钴合金的化学检验分析限值一般要求的标准规范 |
Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys, and Cobalt Alloys |
| ASTM B 892-2003 |
压模铸造用锌铜铝合金锭标准规范 |
Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings |
| ASTM B 894-2003 |
锌铜铝合金压铸件标准规范 |
Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings |
| ASTM F 2292-2003 |
用四种不同的方法测定用喷墨打印机制作的图像耐水性的标准实施规范.滴注、喷射、浸水和摩擦 |
Standard Practice for Determining the Waterfastness of Images Produced by Ink Jet Printers Utilizing Four Different Test Methods-Drip, Spray, Submersion and Rub |
| ASTM A 920/A 920Ma-2002 |
具有机械特性的微合金热锻高质量钢棒标准规范 |
Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties |
| ASTM D 5107-2003 |
建筑用砂岩表面预清理的标准实施规范 |
Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone |
| ASTM B 516-2003 |
焊接的镍铬铁合金(UNS N06600、UNS N06603、UNS N06025和UNS N06045)管标准规范 |
Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045 Tubes) |
| ASTM C 1185-2003 |
无石棉纤维水泥平面薄板、屋面板、侧墙面板和护墙板取样和试验用标准试验方法 |
Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards |
| ASTM B 908-2003 |
锌合金铸锭的色码使用的标准规程 |
Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot |
| ASTM B 914-2003 |
钢的热浸镀锌中使用的锌及锌合金锭色码的标准规程 |
Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel |
| ASTM E 2257-2003 |
墙壁和天花板材料和组件的房屋着火试验的标准试验方法 |
Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies |
| ASTM E 2301-2003 |
使用45°标准几何形状的高可见度交通管制及人员安全应用的荧光反射片和标志材料的日间比色特性的标准试验方 |
Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry |
| ASTM E 255-2002 |
化学成分测定用铜和铜合金取样的标准实施规范 |
Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition |
| ASTM C 1548-2002 |
用振动的脉冲激励法测试耐火材料动态杨式模量、剪切模量及泊松比的标准方法 |
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio of Refractory Materials by Impulse Excitation of Vibration |
| ASTM C 1557-2003 |
纤维的抗拉强度及杨氏模量的标准试验方法 |
Standard Test Method for Tensile Strength and Young's Modulus of Fibers |
| ASTM F 2304-2003 |
用化学灌浆法修复下水道的标准实施规范 |
Standard Practice for Rehabilitation of Sewers Using Chemical Grouting |
| ASTM F 2322-2003 |
阻留及惩罚设施用立式固定物障抗物理攻击性的标准试验方法 |
Standard Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities |
| ASTM F 1235-2003 |
便携式钩接式座椅的消费者安全标准规范 |
Consumer Safety Specification for Portable Hook-on Chairs |
| ASTM D 1917-2003 |
橡胶性能的标准试验方法.热聚合丁苯橡胶生胶和复合橡胶的收缩性 |
Standard Test Methods for Rubber Property - Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR) |
| ASTM D 1757-2003 |
煤灰和焦炭灰中硫酸盐式硫含量的标准试验方法 |
Standard Test Method for Sulfate Sulfur in Ash from Coal and Coke |
| ASTM D 1614-2003 |
丙酮中碱度的标准试验方法 |
Standard Test Method for Alkalinity in Acetone |
| ASTM A 770/A 770M-2003 |
专用钢板通过厚度测量进行的抗拉试验的标准规范 |
Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications |
| ASTM A 372/A 372M-2003 |
薄壁压力容器用碳钢和合金钢锻件的标准规范 |
Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels |
| ASTM D 6695b-2003 |
清漆和相关涂覆料的氙弧曝光的标准实施规范 |
Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
| ASTM D 4804-2003 |
测定非硬质固体塑料易燃性的标准试验方法 |
Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics |
| ASTM D 5207-2003 |
确定塑料材料上小规模燃烧试验用20mm(50W)和125mm(500W)试验火焰的标准实施规范 |
Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials |
| ASTM D 5236-2003 |
重型烃类混合物蒸馏的标准试验方法(真空罐式蒸馏法) |
Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method) |
| ASTM D 5436-2003 |
铸造的聚甲基丙烯酸甲酯塑料棒材、管材和型材标准规范 |
Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes |
| ASTM D 5998-2003 |
模制聚乙烯装运和储绳卷筒的标准规范 |
Standard Specification for Molded Polyethylene Shipping and Storage Drums |
| ASTM C 1299-2003 |
液体密封剂选用的标准指南 |
Standard Guide for Use in Selection of Liquid-Applied Sealants |
| ASTM D 6514-2003 |
汽轮机油高温通用氧化试验的标准试验方法 |
Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils |
| ASTM D 6899-2003 |
汽车喷漆钢实验室周期性腐蚀试验的标准指南 |
Standard Guide for Laboratory Cyclic Corrosion Testing of Automotive Painted Steel |
