| 标准号 |
中文名 |
英文名 |
| ASTM D 2765-2001 |
交联乙烯塑料的凝胶含量和膨胀系数的标准试验方法 |
Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics |
| ASTM F 1411-2001 |
为用户使用提供真空吸尘器现行精选信息的标准实施规程 |
Standard Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use |
| ASTM D 4335-1999 |
机械泵加注器元件保持力测定的标准试验方法 |
Standard Test Method for Determination of Component Retention of a Mechanical Pump Dispenser |
| ASTM D 6453-1999 |
土壤和岩石数据的计算机交换格式标准指南 |
Standard Guide for Format of Computerized Exchange of Soil and Rock Test Data |
| ASTM D 2523-2000 |
屋顶隔膜荷载应变特性试验的标准操作规程 |
Standard Practice for Testing Load-Strain Properties of Roofing Membranes |
| ASTM E 2034-1999 |
车辆经过表面纵断面的模拟载重标准实施规范 |
Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces |
| ASTM D 6170-1997 |
选择地下水模拟编码的标准指南 |
Standard Guide for Selecting a Ground-Water Modeling Code |
| ASTM E 1992-1999 |
术语管理的标准术语 |
Standard Terminology Relating to Terminology Management |
| ASTM E 2031-1999 |
精神心理学欺骗性(多项研究)检测检验的质量控制标准实施规范 |
Standard Practice for Quality Control of Psychophysiological Detection of Deception (Polygraph) Examinations |
| ASTM 14001-1996 |
ANSI/ISO环境管理体系.使用指南规范 |
ANSI/ISO Environmental Management Systems--Specification with Guidance for Use |
| ASTM D 5222-2000 |
石油起源高燃点电绝缘油的标准规范 |
Standard Specification for High Fire-Point Mineral Electrical Insulating Oils |
| ASTM D 5527-2000 |
用声学方法测量表面风和温度的标准规范 |
Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means |
| ASTM D 5552-2000 |
有色皮革耐印流性能的标准试验方法 |
Standard Test Method for Resistance of Colored Leather to Bleeding |
| ASTM E 1558-1999 |
金相试样电解抛光标准指南 |
Standard Guide for Electrolytic Polishing of Metallographic Specimens |
| ASTM D 6256/D 6256M-1999 |
沿滑道拖运的、承载负荷情况下和木条加固的船运箱的标准规范 |
Standard Specification for Wood-Cleated Shipping Boxes and Skidded, Load-Bearing Bases |
| ASTM D 6392-1999 |
热溶法测定非增强土工薄膜接缝完整性搭标准试验方法 |
Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods |
| ASTM D 6429-1999 |
地球物理法选择地表的标准指南 |
Standard Guide for Selecting Surface Geophysical Methods |
| ASTM D 5837-1999 |
用高效液相色谱法(HPLC)测试电绝缘液中呋喃化合物的标准试验方法 |
Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High- Performance Liquid Chromatography (HPLC) |
| ASTM C 1288-1999 |
单块非石棉纤维水泥内衬底薄板的标准规范 |
Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets |
| ASTM E 1596-1999 |
光电模件太阳辐射气候老化的标准试验方法 |
Standard Test Methods for Solar Radiation Weathering of Photovoltaic Modules |
| ASTM F 1611-2000 |
髓内铰具标准规范 |
Standard Specification for Intramedullary Reamers |
| ASTM A 950/A 950M-1999 |
熔接环氧树脂涂层结构钢氢反应堆和垛板的标准规范 |
Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling |
| ASTM 14004-1996 |
ANSI/ISO环境管理体系.原理、系统和支持技术的通用指南 |
ANSI/ISO Environmental Management Systems--General Guidelines on Principles, Systems and Supporting Techniques |
| ASTM D 2060-2000 |
测量拉链尺寸的标准试验方法 |
Standard Test Methods for Measuring Zipper Dimensions |
| ASTM C 832-2000 |
测量在负荷作用下耐火材料的热膨胀和蠕变的标准试验方法 |
Standard Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load |
| ASTM C 863-2000 |
高温时评定碳化硅耐火材料抗氧化性的标准试验方法 |
Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures |
| ASTM D 4764-2001 |
X射线荧光光谱法测定涂料中二氧化钛含量的标准试验方法 |
Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint |
| ASTM D 4792-2000 |
从水化反应中对集料膨胀的标准试验方法 |
Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions |
| ASTM D 4896-2001 |
胶粘连接单边搭接样品试验结果的使用的标准指南 |
Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results |
| ASTM D 5086-2001 |
用火焰原子吸收分光光度法测定大气作用下湿沉积物中钙、镁、钾和钠含量的标准试验方法 |
Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry |
| ASTM D 5868-2001 |
纤维增强塑料粘结剂的边缘剪切粘着性标准试验方法 |
Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding |
| ASTM C 1168-2001 |
分析用钚材料的制备和溶解的标准实施规程 |
Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis |
| ASTM D 2919-2000 |
用拉力负荷法测定受剪切力的胶粘接合强度的标准试验方法 |
Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
| ASTM D 5286-2001 |
在一般生产条件下,涂料喷涂传送效率测定的标准试验方法 |
Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints |
| ASTM D 5295-2000 |
用水密材料粘结薄膜制备混凝土表面的标准指南 |
Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems |
| ASTM D 5715-2000 |
评估泥炭及有机土壤腐殖程度(目测/人工方法)的标准试验方法 |
Standard Test Method for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method) |
| ASTM D 5805-2000 |
(原批)橡胶的碳黑合成的标准试验方法 |
Standard Test Method for Rubber from Synthetic Sources--Carbon Black in Masterbatches |
| ASTM E 331-2000 |
用统一的静态压差法测定外窗、天窗、护墙和门渗水度的标准测试方法 |
Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference |
| ASTM D 1094-2000 |
航空燃料水反应性的标准试验方法 |
Standard Test Method for Water Reaction of Aviation Fuels |
| ASTM D 4913-2000 |
通过直读、污斑范围、目视化学检测器测定硫化氢的浓度的标准操作规程 |
Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors |
| ASTM D 5052-2000 |
皮革对水蒸汽的渗透性的标准试验方法 |
Standard Test Method for Permeability of Leather to Water Vapor |
| ASTM D 6566-2000 |
测量泥碳钢筋网单位面积质量的标准试验方法 |
Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats |
| ASTM E 465-2000 |
用氧化还原滴定法测定锰矿石中锰含量的标准试验方法 |
Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titration |
| ASTM D 531-2000 |
橡胶特性的标准试验方法.普西和琼斯压痕试验 |
Standard Test Method for Rubber Property-Pusey and Jones Indentation |
| ASTM D 792-2000 |
用位移法测定塑料密度和比重(相关密度)的标准试验方法 |
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| ASTM A 341/A 341M-2000 |
用直流磁导计和冲击试验法测定材料的直流磁性能的标准试验方法 |
Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods |
| ASTM A 894/A 894M-2000 |
非金属磁性材料的饱和磁化或磁导的标准试验方法 |
Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials |
| ASTM B 339-2000 |
锡锭的标准规范 |
Standard Specification for Pig Tin |
| ASTM A 503/A 503M-2001 |
大型锻件曲轴的超声检验的标准规范 |
Standard Specification for Ultrasonic Examination of Forged Crankshafts |
| ASTM D 6140-2000 |
测定全幅沥青铺面用铺设物中沥青滞留的标准试验方法 |
Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications |
| ASTM D 6597-2000 |
工地关闭可达到的净化等级评估的标准实施规程 |
Standard Practice for Assessment of Attaining Clean Up Level for Site Closure |
| ASTM E 741-2000 |
用示踪气体稀释法测定单区内空气变化的标准测试方法 |
Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution |
| ASTM D 4474-2000 |
苯乙烯热塑性弹性体注模料和挤压料的标准分类系统 |
Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES) |
| ASTM D 6565-2000 |
用时域反射计法测定土壤中水含量的标准试验方法 |
Standard Test Method for Determination of Water (Moisture) Content of Soil by the Time-Domain Reflectometry (TDR) Method |
| ASTM D 4672-2000 |
聚氨酯原材料的标准试验方法:多元醇含水量的测定 |
Standard Test Methods for Polyurethane Raw Materials: Determination of Water Content of Polyols |
| ASTM G 126-2000 |
氧浓缩气氛中材料相容性和灵敏性标准术语 |
Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres |
| ASTM D 6590/D 6590M-2000 |
密封纤维容器和罐用的压敏胶带的标准规范 |
Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans |
| ASTM C 1481-2000 |
外部绝缘和精整系统用密接剂使用的标准指南 |
Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS) |
| ASTM D 6582-2000 |
分等级抽样的标准指南:环境抽样中平均浓度的有效评估 |
Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling |
| ASTM E 2081-2000 |
基于风险的改正行动的标准指南 |
Standard Guide for Risk-Based Corrective Action |
| ASTM D 6564-2000 |
地下水样品现场过滤的标准指南 |
Standard Guide for Field Filtration of Ground-Water Samples |
| ASTM D 2143-2000 |
增强热固塑料管耐周期性压力强度的标准试验方法 |
Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe |
| ASTM D 4579-2000 |
脱脂酸或不起泡酸管理的标准实施规程 |
Standard Practice for Handling an Acid Degreaser or Still |
| ASTM F 2062-2000 |
与外科植入物相互连接的方形扭杆标准规范 |
Standard Specification for Square Drive Interconnections on Surgical Instruments |
| ASTM F 2064-2000 |
生物医学和组织工程医学产品用的作为原材料的藻酸盐的特性和测试标准指南 |
Standard Guide for Characterization and Testing of Alginates as Starting Materials Intended for Use in Biomedical and Tissue-Engineered Medical Products Application |
| ASTM E 2132-2001 |
不动产、动产实测库存量的标准实施规程 |
Standard Practice for Physical Inventory of Durable, Moveable Property |
| ASTM F 2071-2000 |
位置近似(非接触式)或限值(机械接触式)光纤开关标准规范 |
Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic |
| ASTM D 5199-2001 |
测量土工织物和地膜标定厚度的标准试验方法 |
Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
| ASTM D 5367-2000 |
用水或水/磨料喷洗时为防止钢生锈用抑制剂处理的表面上镀层评定的标准规范 |
Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted |
| ASTM D 5826-2000 |
尺寸2至6x/7儿童身材标准测量表 |
Standard Tables of Body Measurements for Children, Sizes 2 to 6x/7 |
| ASTM E 161-2000 |
精密电铸筛(方形筛孔系列)的标准规范 |
Standard Specification for Precision Electroformed Sieves |
| ASTM C 1274-2000 |
用物理吸收法测定高级陶瓷比表面积的标准试验方法 |
Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption |
| ASTM D 3963/D 3963M-2001 |
环氧树脂涂覆钢筋制造和现场搬运标准规范 |
Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars |
| ASTM E 2131-2001 |
财产丢失、损害或破坏评估的标准实施规程 |
Standard Practice for Assessing Loss, Damage, or Destruction of Property |
| ASTM D 5852-2000 |
喷射指示法现场或实验室测定土壤腐蚀性的标准试验方法 |
Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method |
| ASTM E 1427-2000 |
测定抗微生物药剂和其它药剂对生物膜的防护、钝化和脱除效果试验方法的选择的标准指南 |
Standard Guide for Selecting Test Methods to Determine the Effectiveness of Antimicrobial Agents and Other Chemicals for the Prevention, Inactivation and Removal of Biofilm |
| ASTM B 135M-2000 |
无缝黄铜管(米制)标准规范 |
Standard Specification for Seamless Brass Tube [Metric] |
| ASTM D 6630-2001 |
低坡度绝热屋顶薄膜装配性能的标准指南 |
Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance |
| ASTM C 1414-2001 |
用离子交换法从钚中分离镅的标准实施规程 |
Standard Practice for The Separation of Americium from Plutonium by Ion Exchange |
| ASTM D 6603-2000 |
防紫外线织物标签的标准指南 |
Standard Guide for Labeling of UV-Protective Textiles |
| ASTM D 4529-2001 |
航空燃料燃烧净热值的评价的标准试验方法 |
Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
| ASTM D 4287-2000 |
用锥板粘度计测定高速剪切粘度的标准试验方法 |
Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer |
| ASTM D 4511-2000 |
基本饱和泥炭水渗导性的标准试验方法 |
Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat |
| ASTM D 1554-2001 |
与木基纤维和刨花板材料相关的标准术语 |
Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials |
| ASTM D 4339-2001 |
测定胶粘剂气味的标准试验方法 |
Standard Test Method for Determination of the Odor of Adhesives |
| ASTM C 1106-2000 |
碳砖物理特性及耐化学性的标准试验方法 |
Standard Test Methods for Chemical Resistance and Physical Properties of Carbon Brick |
| ASTM C 1094-2001 |
可移动的挠性绝热覆盖物标准指南 |
Standard Guide for Flexible Removable Insulation Covers |
| ASTM E 2119-2000 |
用野外便携式X射线荧光设备现场测量涂料或其它覆层中铅含量用质量系统的标准规程 |
Standard Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices |
| ASTM E 2120-2000 |
涂料薄膜中铅含量测量用便携式X射线荧光光谱仪性能评估的标准实施规程 |
Standard Practice for the Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films |
| ASTM F 1664-2001 |
与链接栅栏一起使用的聚氯乙烯涂层拉伸钢丝的标准规范 |
Standard Specification for Poly(Vinyl Chloride) (PVC)-Coated Steel Tension Wire Used with Chain-Link Fence |
| ASTM F 1665-2001 |
与链接栅栏一起使用的聚氯乙烯涂层刺钢丝的标准规范 |
Standard Specification for Poly(Vinyl Chloride) (PVC)and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence |
| ASTM D 6596-2000 |
汽油和相关烃类物质存储的标准实施规程 |
Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials |
| ASTM F 997a-1998 |
医疗设备用聚碳酸酯树脂标准规范 |
Standard Specification for Polycarbonate Resin for Medical Applications |
| ASTM D 1122a-1997 |
用液体比重计测量发动机冷却剂及其浓缩物的浓度或相对浓度的标准试验方法 |
Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer |
| ASTM D 6737-2001 |
锥形漆刷丝松密度的标准测试方法 |
Standard Test Method for Bulk Density of Tapered Paintbrush Filaments |
| ASTM F 1586-2002 |
外科植入物用锻制氮加强的21铬10镍3锰2.5钼不锈钢棒(UNS S31675)标准规范 |
Standard Specification for Wrought Nitrogen Strengthened 21 Chromium - 10 Nickel - 3 Manganese - 2.5 Molybdenum Stainless Steel Bar for Surgical Implants (UNS S31675) |
| ASTM D 5477-2002 |
傅里叶变换红外线显微光谱法识别聚合物层或夹杂物的标准实施规范 |
Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR) |
| ASTM D 5814-2002 |
用蚀斑试验测定再循环聚对苯二甲酸乙酯薄膜和晶片中杂质的标准试验实施规范 |
Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test |
| ASTM D 3935-2002 |
未填充的和增强的聚碳酸酯材料标准规范 |
Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material |
| ASTM D 5012-2001 |
大气湿沉积物采集和保存使用材料的制备标准指南 |
Standard Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition |
| ASTM D 1458-2001 |
电绝缘用完全硫化硅橡胶涂层的玻璃布与玻璃带的标准试验方法 |
Standard Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation |
| ASTM D 350-2001 |
电绝缘用经处理软套管的标准试验方法 |
Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation |
| ASTM F 1637-2002 |
安全行走表面的标准规程 |
Standard Practice for Safe Walking Surfaces |
| ASTM A 721/A 721M-2002 |
有定向电工钢延展性的标准试验方法 |
Standard Test Method for Ductility of Oriented Electrical Steel |
| ASTM B 502-2002 |
包铝钢芯加强的铝导线用包铝钢芯线的标准规范 |
Standard Specification for Aluminum-Clad Steel Core Wire for Aluminum Conductors, Aluminum-Clad Steel Reinforced |
| ASTM C 924M-2002 |
低压空气试验法测试混凝土污水管道标准实施规程(米制) |
Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric) |
| ASTM E 900-2002 |
在反应堆容器材料中预测辐射感应变化导致温度的变化的标准指南,E 706(IIF) |
Standard Guide for Predicting Radiation-Induced Transition Temperature Shift in Reactor Vessel Materials, E706 (IIF) |
| ASTM E 944-2002 |
反应堆监测时中子光谱调节法的应用的标准指南,E 706(IIA) |
Standard Guide for Application of Neutron Spectrum Adjustment Methods in Reactor Surveillance, E706 (IIA) |
| ASTM F 1110-2002 |
夹层腐蚀试验用标准试验方法 |
Standard Test Method for Sandwich Corrosion Test |
| ASTM B 921-2002 |
铝和铝合金上覆盖的非六价铬层的标准规范 |
Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys |
| ASTM A 753-2002 |
煅制镍铁软磁合金标准规范 |
Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080) |
| ASTM A 839-2002 |
软磁设备用磷铁粉末冶金部件的标准规范 |
Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications |
| ASTM B 251-2002 |
锻制无缝铜及铜合金管一般要求的标准规范 |
Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube |
| ASTM A 210/A 210M-2002 |
无缝中碳钢锅炉和过热器管标准规范 |
Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes |
| ASTM A 123/A 123M-2002 |
铁和钢制品镀锌层(热浸镀锌)的标准规范 |
Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
| ASTM A 178/A 178M-2002 |
电阻焊接碳素钢和碳锰钢锅炉和过热器管的标准规范 |
Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes |
| ASTM E 2225-2002 |
纺织品和绳索检验论证用标准指南 |
Standard Guide for Forensic Examination of Fabrics and Cordage |
| ASTM E 2205-2002 |
生态资源保护用冒险矫正作用的标准指南 |
Standard Guide for Risk-Based Corrective Action for Protection of Ecological Resources |
| ASTM A 838-2002 |
继电器用易切铁素体不锈软磁合金棒标准规范 |
Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications |
| ASTM A 727/A 727M-2002 |
具有固定切口韧性的管道部件用碳素钢锻件标准规范 |
Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness |
| ASTM D 3877-2002 |
土壤石灰混合物单向膨胀,收缩和隆起压力的标准试验方法 |
Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures |
| ASTM D 3925-2002 |
液态涂料和相关颜料涂层的抽样标准实施规程 |
Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
| ASTM F 116-2000 |
医疗用螺丝刀标准规范 |
Standard Specification for Medical Screwdriver Bits |
| ASTM C 1489-2001 |
结构用石灰膏标准规范 |
Standard Specification for Lime Putty for Structural Purposes |
| ASTM D 6625-2001 |
用荧光UV冷凝曝光和曝水仪器对涂漆板抛光防护性能试验的标准实施规程 |
Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus |
| ASTM C 905-2001 |
耐化学的灰浆、薄浆、整体面层和聚酯混凝土表观密度的标准试验方法 |
Standard Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes |
| ASTM F 869-2001 |
与运动鞋及生物力学相关的标准术语 |
Standard Terminology Relating to Athletic Shoes and Biomechanics |
| ASTM F 1019M-2000 |
钢制甲板机械装载箱标准规范(米制) |
Standard Specification for Steel Deck Gear Stowage Box [Metric] |
| ASTM F 1196-2000 |
防水拉门组件标准规范 |
Standard Specification for Sliding Watertight Door Assemblies |
| ASTM D 4080-2000 |
工业用蒸气脱脂级三氯乙烯标准规范 |
Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade |
| ASTM D 1447-2000 |
用纤维照影机测量法测定棉纤维的长度和长度均匀度的标准试验方法 |
Standard Test Method for Length and Length Uniformity of Cotton Fibers by Fibrograph Measurement |
| ASTM A 860/A 860M-2000 |
锻制高强度低合金钢对缝焊接配件标准规范 |
Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings |
| ASTM D 6604-2000 |
用差分式扫描热量仪测定碳氢化合物树脂玻璃导热温度的标准实施规程 |
Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry |
| ASTM C 1411-2001 |
同位素分析前铀和钚离子交换分离的标准实施规程 |
Standard Practice for the Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis |
| ASTM E 122-2000 |
为估算一批产品或者一次加工过程的制品的质量对样品尺寸的选择的标准规程 |
Standard Practice for Calculating Sample Size to Estimate, With a Specified Tolerable Error, the Average for Characteristic of a Lot or Process |
| ASTM E 275-2001 |
说明和测量紫外线,可见和近红外线分光光度计的性能的标准操作规程 |
Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers |
| ASTM/ISO 14041-1998 |
环境管理.生物圈评价.目的和范围的定义及资源分析 |
Environmental management - Life cycle assessment - Goal and scope definition and inventory analysis |
| ASTM C 1348-2001 |
直接加氢还原成核级二氧化铀的U-235含量低于5%的混合氧化铀的标准规范 |
Standard Specification for Blended Uranium Oxides with a 235U Content of Less Than 5 % for Direct Hydrogen Reduction to Nuclear Grade Uranium Dioxide |
| ASTM E 1386-2000 |
用溶剂萃取法分离和浓缩从火烧瓦砾样品中获取的可燃液体残渣的标准实施规程 |
Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction |
| ASTM/ISO 64-1997 |
产品标准中包括的环境方面指南 |
Guide for inclusion of environmental aspects in product standards |
| ASTM/ISO 14025-2000 |
技术报告.环境标志和声明.(3型)环境声明 |
Technical Report - Environmental labels and declarations - Type III environmental declarations |
| ASTM D 6636-2001 |
加筋土工薄膜的剥纸强度的测定的标准试验方法 |
Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes |
| ASTM/ISO 14031-1999 |
环境管理.环境性能评定导则 |
Environmental management - Environmental performance evaluation - Guidelines |
| ASTM/ISO 14040-1997 |
环境管理.生物圈评价.原则和框架 |
Environmental management - Life cycle assessment - Principles and framework |
| ASTM C 1259-2001 |
用振动脉冲激励法的高级陶瓷动态杨氏模量、剪切模量和泊松比的标准试验方法 |
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration |
| ASTM D 3989-2001 |
EDTA法涂料催干剂中稀土金属总量的标准试验方法 |
Standard Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method |
| ASTM A 1015-2001 |
卫生洁具用管形制品的目视内孔探测检验的标准指南 |
Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications |
| ASTM D 6607-2000 |
在规范限定内严密语句变更范围的标准实施规程 |
Standard Practice for Inclusion of Precision Statement Variation in Specification Limits |
| ASTM D 6626-2001 |
分级特立尼达湖地改良沥青的标准规范 |
Standard Specification for Graded Trinidad Lake Modified Asphalt Binder |
| ASTM F 1323-2001 |
船用焚烧装置标准规范 |
Standard Specification for Shipboard Incinerators |
| ASTM F 2084-2001 |
受控环境中安全壳吊杆性能数据采集的标准指南 |
Standard Guide for Collecting Containment Boom Performance Data in Controlled Environments |
| ASTM E 2123-2001 |
性侵犯调查中证据传递的标准实施规程 |
Standard Practice for the Transmittal of Evidence in Sexual Assault Investigation |
| ASTM C 1493-2001 |
用差动衰减系统钝化-活化中子计数法对废物中的核物质进行无损分析的标准试验方法 |
Standard Test Method for Non-Destructive Assay of Nuclear Material in Waste by Passive and Active Neutron Counting Using a Differential Die-Away System |
| ASTM D 6545-2000 |
儿童睡衣用纺织品易燃性的标准试验方法 |
Standard Test Method for Flammability of Textiles Used in Children's Sleepwear |
| ASTM E 2134-2001 |
评定外部绝缘和涂层系统拉伸-粘着特性的标准试验方法 |
Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS) |
| ASTM D 6661-2001 |
用抽样方法从表面现场收集有机化合物的标准实施规程 |
Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling |
| ASTM C 1494-2001 |
测定氮化硅粉末中碳、氮、氧的质量比值的标准试验方法 |
Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder |
| ASTM G 169-2001 |
自然老化试验基本统计方法应用的标准指南 |
Standard Guide for Application of Basic Statistical Methods to Weathering Tests |
| ASTM D 6398-2001 |
增强标签上药物名称的识别的标准实施规程 |
Standard Practice to Enhance Identification of Drug Names on Labels |
| ASTM D 6416/D 6416M-2001 |
承受分布荷载的简易支撑夹层复合板二维挠曲性能的标准试验方法 |
Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load |
| ASTM F 693-2001 |
使用液体封缝剂密封弹性铺地薄板制品接缝的标准实施规范 |
Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers |
| ASTM E 1533-2000 |
4-6-二醚基-2-2-苯胺基(DAPI)染色法间接检测细胞培养中菌质的标准实施规程 |
Standard Practice for Indirect Detection of Mycoplasma in Cell Culture by 4`-6-Diamidino-2-2 Phenylindole (DAPI) Staining |
| ASTM E 1512-2001 |
测试粘接的锚的粘结性能的标准试验方法 |
Standard Test Methods for Testing Bond Performance of Bonded Anchors |
| ASTM D 5568-2001 |
微波频率下固体材料相对复介电常数和磁导率测量标准试验方法 |
Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies |
| ASTM D 2275-2001 |
固体电绝缘材料表面对局部放电(电晕)的耐电压性标准试验方法 |
Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface |
| ASTM D 6653-2001 |
真空法测定高空对包装系统影响的标准试验方法 |
Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method |
| ASTM C 413-2001 |
耐化学侵蚀的灰浆、薄浆、整块铺面石料和聚酯混凝土吸收性的标准试验方法 |
Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes |
| ASTM C 639-2001 |
弹性密封料流变(流动)特性的标准试验方法 |
Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants |
| ASTM D 3831-2001 |
用原子吸收分光光度法测定汽油中锰含量的标准试验方法 |
Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy |
| ASTM D 6642-2001 |
确定土壤水(湿度)流量的方法比对的标准指南 |
Standard Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux |
| ASTM D 6639-2001 |
地下勘察用频域电磁法使用的标准指南 |
Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Investigations |
| ASTM G 78-2001 |
海水及其它含氯化物的水环境中铁基和镍基不锈合金的裂隙腐蚀试验的标准指南 |
Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments |
| ASTM G 38-2001 |
C-环形应力腐蚀试样的制作和使用的标准实施规程 |
Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens |
| ASTM E 2144-2001 |
工作场所环境中金属加工液体气溶胶中内毒素的个人取样和分析的标准实施规程 |
Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
| ASTM F 2089-2001 |
语言说明服务的标准指南 |
Standard Guide for Language Interpretation Services |
| ASTM D 6655-2001 |
与机械泵分配器有关的标准术语 |
Standard Terminology Relating to Mechanical Pump Dispensers |
| ASTM D 6592-2001 |
轻便式化学发光水质测定的标准试验方法 |
Standard Test Method for Portable Chemiluminescent Water Quality Determination |
| ASTM B 916-2001 |
金属薄板搪瓷覆层的粘着性的标准试验方法 |
Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal |
| ASTM B 915-2001 |
自清洗炉覆层的静态耐热性测量用标准试验方法 |
Standard Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating |
| ASTM D 6647-2001 |
通过原子吸收测定酸性可溶铁的标准试验方法 |
Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption |
| ASTM D 6641-2001 |
用组合式荷载压力试验夹具测定聚合物基质复合叠材的压力特性的标准试验方法 |
Standard Test Method for Determining the Compressive Properties of Polymer Matrix Composite Laminates Using a Combined Loading Compression (CLC) Test Fixture |
| ASTM B 327-2001 |
制作锌压模合金用铝合金硬化剂标准规范 |
Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys |
| ASTM B 792-2001 |
空壳铸造用铸模中的锌合金锭标准规范 |
Standard Specification for Zinc Alloys in Ingot Form for Slush Casting |
| ASTM F 2103-2001 |
作物生物化学和组织工程医疗产品原材料的脱乙酰壳多糖盐的表征和试验标准指南 |
Standard Guide for Characterization and Testing of Chitosan Salts as Starting Materials Intended for Use in Biomedical and Tissue-Engineered Medical Product Applications |
| ASTM D 2520-2001 |
在微波频率和1650℃时固体电绝缘材料复合介电常数的标准试验方法 |
Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650oC |
| ASTM F 2073-2001 |
薄膜开关无损短路检验的标准试验方法 |
Standard Test Method for Non-Destructive Short Circuit Testing of a Membrane Switch |
| ASTM D 1006-2001 |
木材表面涂料的室外暴露试验标准实施规程 |
Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood |
| ASTM D 6656-2001 |
测定湿铬鞣革中氧化铬的标准试验方法(高氯酸氧化) |
Standard Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation) |
| ASTM D 280-2001 |
颜料吸收的水份(及试验条件下挥发的其他物质)的标准试验方法 |
Standard Test Methods for Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in Pigments |
| ASTM C 1332-2001 |
用脉冲反射接触技术测量高级陶瓷超声衰减系数的标准试验方法 |
Standard Test Method for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique |
| ASTM D 268-2001 |
涂料及其相关涂层和原料用挥发性溶剂及化学中间体的抽样和测试的标准指南 |
Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material |
| ASTM D 3635-2001 |
用原子吸收分光光度法测定电绝缘油中溶解的铜含量的标准试验方法 |
Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry |
| ASTM F 2099-2001 |
陆地探查用实测原图的准备和使用时统一横墨卡托投影网格的使用标准指南 |
Standard Guide for Use of Universal Transverse Mercator (UTM) Grids When Preparing and Using a Field Map for Land Search |
| ASTM D 6659-2001 |
物理和化学试验用湿铬鞣革的取样和制备的标准实施规程 |
Standard Practice for Sampling and Preparation of Wet Blue for Physical and Chemical Tests |
| ASTM D 6657-2001 |
测定湿铬鞣革的pH值的标准试验方法 |
Standard Test Method for pH of Wet Blue |
| ASTM/ISO 9001-2000 |
质量管理体系.要求 |
Quality management systems - Requirements |
| ASTM/ISO 9004-2000 |
质量管理体系.性能提高导则 |
Quality management systems - Guidelines for performance improvements |
| ASTM/ISO 9000-2000 |
质量管理体系.基础及词汇 |
Quality management systems - Fundamentals and vocabulary |
| ASTM E 879-2001 |
临床实验室温度测量用热敏电阻探测器标准规范 |
Standard Specification for Thermistor Sensors for Clinical Laboratory Temperature Measurements |
| ASTM F 1412-2001 |
腐蚀废物的下水道系统用聚烯烃管和配件的标准规范 |
Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems |
| ASTM D 6643-2001 |
木基板材角部抗冲击性测试的标准试验方法 |
Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance |
| ASTM D 6650-2001 |
测定净室中使用的无纺织物动擦除效率、湿颗粒去除能力和织物粒子作用的标准试验方法 |
Standard Test Method for Determining the Dynamic Wiping Efficiency, Wet Particle Removal Ability, and Fabric Particle Contribution of Nonwoven Fabrics Used in Cleanrooms |
| ASTM F 1563-2001 |
聚乙烯(PE)气体管道或管子用挤出工具的标准规范 |
Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing |
| ASTM F 1578-2001 |
薄膜开关接触闭合循环的标准实施规程 |
Standard Practice for Contact Closure Cycling of a Membrane Switch |
| ASTM F 639a-1998 |
医疗设备用聚乙烯塑料标准规范 |
Standard Specification for Polyethylene Plastics for Medical Applications |
| ASTM F 495a-1999 |
暴露在高温下的衬垫材料重量损失的标准测试方法 |
Standard Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures |
| ASTM F 602a-1998 |
可植入的热固性环氧塑料标准 |
Standard Criteria for Implantable Thermoset Epoxy Plastics |
| ASTM F 624a-1998 |
评定医学用热塑性聚氨基甲酸乙酯固体及溶液的标准指南 |
Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications |
| ASTM D 971a-1999 |
采用环法测定油水界面张力的标准试验方法 |
Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method |
| ASTM D 1101a-1997 |
室外用层压结构木制品的胶合接头完整性的标准试验方法 |
Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use |
| ASTM D 1185a-1998 |
在材料搬运和货运中使用的托盘和有关设备的标准试验方法 |
Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping |
| ASTM E 1671a-1995 |
办公设备对于清洁卫生的适用性标准分类 |
Standard Classification for Serviceability of an Office Facility for Cleanliness |
| ASTM D 4783-2001 |
在容器内被细菌、酵母菌和霉菌侵染的胶粘剂制备物耐受性的标准试验方法 |
Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi |
| ASTM A 625/A 625M-2003 |
一次冷轧黑钢板用锡轧材标准规范 |
Standard Specification for Tin Mill Products, Black Plate, Single Reduced |
| ASTM A 984/A 984M-2003 |
电阻焊接黑色平端钢衬管用标准规范 |
Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded |
| ASTM B 100a-2003 |
桥梁和其它结构用锻制铜合金轴承和膨胀中厚板及薄板的标准规范 |
Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use |
| ASTM D 6911-2003 |
实验室分析用环境样品的包装和装运标准指南 |
Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis |
| ASTM D 6924-2003 |
桥用预制热塑硫化弹性体密封件的标准规范 |
Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges |
| ASTM B 738-2003 |
电导线用成束细线和成束绞捻铜导线标准规范 |
Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors |
| ASTM B 856-2003 |
镀覆钢支持的同心铺设铝绞线标准规范 |
Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS) |
| ASTM D 3492-2003 |
橡胶避孕套(男用避孕套)标准规范 |
Standard Specification for Rubber Contraceptives (Male Condoms) |
| ASTM C 991-2003 |
金属建筑物用挠性玻璃纤维绝缘材料标准规范 |
Standard Specification for Flexible Glass Fiber Insulation for Metal Buildings |
| ASTM D 4867/D 4867M-2004 |
潮湿对沥青混凝土铺面混合料影响的标准试验方法 |
Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures |
| ASTM A 809-2003 |
铝涂覆(涂铝的)碳素钢丝的标准规范 |
Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire |
| ASTM A 363-2003 |
地面架空线用镀锌钢丝绳的标准规范 |
Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand |
| ASTM B 512-2004 |
镍铬硅合金坯料和棒材标准规范 |
Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars |
| ASTM D 6897a-2003 |
液化石油气蒸气压力的标准试验方法(膨胀法) |
Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method) |
| ASTM A 474-2003 |
包铝钢绞线的标准规范 |
Standard Specification for Aluminum-Coated Steel Wire Strand |
| ASTM D 5275-2003 |
含流体聚合物的燃料喷射器剪切稳定性试验(FISST)的标准试验方法 |
Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids |
| ASTM D 7002-2003 |
用水搅拌系统测定暴露的土工薄膜上泄漏位置的标准实施规程 |
Standard Practice for Leak Location on Exposed Geomembranes Using the Water Puddle System |
| ASTM D 7000-2004 |
沥青乳液表面处理样品扫除试验的标准试验方法 |
Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples |
| ASTM D 4171-2003 |
燃料系统防冻剂的标准规范 |
Standard Specification for Fuel System Icing Inhibitors |
| ASTM D 3612-2002 |
用气体色谱分离法分析电绝缘油中溶解的气体成分的标准试验方法 |
Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography |
| ASTM C 171-2003 |
养护混凝土用薄板材标准规范 |
Standard Specification for Sheet Materials for Curing Concrete |
| ASTM C 295-2003 |
混凝土用集料的岩相检验标准指南 |
Standard Guide for Petrographic Examination of Aggregates for Concrete |
| ASTM C 535-2003 |
用洛杉矶磨耗试验机测定大规格粗集料抗磨性和抗冲击性的标准试验方法 |
Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
| ASTM E 104-2002 |
用水溶液保持相对恒定湿度的标准实施规程 |
Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions |
| ASTM E 1419b-2002 |
用声音排放法检验无缝、充气的压力容器的标准试验方法 |
Standard Test Method for Examination of Seamless, Gas- Filled, Pressure Vessels Using Acoustic Emission |
| ASTM E 1945-2002 |
农药弥散率的标准试验方法 |
Standard Test Method for Percent Dispersibility |
| ASTM/ISO 10079-1-1999 |
医疗抽吸设备.第1部分:电动抽吸设备.安全要求 |
Medical Suction Equipment - Part 1: Electrically Powered Suction Equipment - Safety Requirements |
| ASTM/ISO 10079-2-1999 |
医疗抽吸设备.第2部分:手动抽吸设备 |
Medical Suction Equipment - Part 2: Manually Powered Suction Equipment |
| ASTM B 849-2002 |
钢铁预处理减小氢脆变危险的标准规范 |
Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement |
| ASTM C 1506-2003 |
基于灰浆和灰泥的水泥的水滞留性的标准试验方法 |
Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters |
| ASTM C 1524a-2002 |
集料中抽去水的氯化物的标准试验方法(索格利特法) |
Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method) |
| ASTM C 1147-2001 |
耐化学腐蚀热塑(性)塑料的短期拉伸焊接强度测定的标准实施规程 |
Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics |
| ASTM D 1490-2001 |
脲甲醛树脂溶液中不挥发物含量的标准测试方法 |
Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions |
| ASTM D 2171-2001 |
用真空毛细管粘度计测定沥青粘度的标准试验方法 |
Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer |
| ASTM D 5930-2001 |
用瞬变线源技术对塑料热导性的标准试验方法 |
Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique |
| ASTM E 1715-2001 |
计算机病人记录系统中挂号、住院、出院和转院(RADT)功能的目标模块的标准实施规程 |
Standard Practice for An Object-Oriented Model for Registration, Admitting, Discharge, and Transfer (RADT) Functions in Computer-Based Patient Record Systems |
| ASTM D 5162-2001 |
金属衬底上非传导保护涂料的间断性(假期)检验标准实施规程 |
Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates |
| ASTM D 5190-2001 |
石油产品蒸气压力的标准试验方法(自动方法) |
Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method) |
| ASTM D 4370-2001 |
电涂镀槽中酸和碱毫当量常数的标准试验方法 |
Standard Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath |
| ASTM D 6645-2001 |
红外分光光度测定法测定聚乙烯中甲基(共聚单体)含量的标准试验方法 |
Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry |
| ASTM D 5184-2001 |
通过灰化、熔融、感应耦合等离子体原子放射分光光度法和原子吸收分光光谱法测定燃料油中铝和硅的标准试验方 |
Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry |
| ASTM F 2113-2001 |
薄膜电子设备用高纯度金属溅涂靶杂质含量和等级的分析和报告标准指南 |
Standard Guide for Analysis and Reporting the Impurity Content and Grade of High Purity Metallic Sputtering Targets for Electronic Thin Film Applications |
| ASTM/ISO 14024-2001 |
环境标签和声明.I型环境标签.原理和过程 |
Environmental labels and declarations -- Type I environmental labelling -- Principles and procedures |
| ASTM B 682-2001 |
电导体标准米制尺寸的标准规范 |
Standard Specification for Standard Metric Sizes of Electrical Conductors |
| ASTM B 666/B 666M-2001 |
铝和镁制品的识别标志的标准实施规程 |
Standard Practice for Identification Marking of Aluminum and Magnesium Products |
| ASTM D 6637-2001 |
单边或多边拉伸法测定土工格栅拉伸特性的标准试验方法 |
Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method |
| ASTM D 6644-2001 |
有眼镶边纽扣抗拉强度的标准试验方法 |
Standard Test Method for Tension Strength of Sew-Through Flange Buttons |
| ASTM F 2109-2001 |
测定由于飞行器维修试剂作用于飞行器座舱内部硬表面上而引起的颜色变化和锈蚀的标准试验方法 |
Standard Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces |
| ASTM D 6651-2001 |
无纺织物吸附率和吸附能力测定的标准试验方法 |
Standard Test Method for Determining The Rate of Sorption and Sorptive Capacity Of Nonwoven Fabrics |
| ASTM D 6652-2001 |
测定无纺织物留下的纤维状碎屑的标准试验方法 |
Standard Test Method for Determining Fibrous Debris From Nonwoven Fabrics |
| ASTM A 800/A 800M-2001 |
奥氏体合金钢铸件中铁素体含量估算的标准实施规程 |
Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof |
| ASTM C 1052-2001 |
液体六氟化铀散装取样标准实施规程 |
Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride |
| ASTM A 778-2001 |
焊接未退火的奥氏体不锈钢管形制品标准规范 |
Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products |
| ASTM D 6664-2001 |
单位和家用编织、针织和棉的床褥品的标准规范 |
Standard Specification for Woven, Knitted and Flocked Bedspread Products for Institutional and Household Use |
| ASTM F 1776-2001 |
彩弹球运动用眼部保护装置的标准规范 |
Standard Specification for Eye Protective Devices for Paintball Sports |
| ASTM D 6200-2001 |
通过冷却曲线分析测定淬火油冷却特性的标准试验方法 |
Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis |
| ASTM E 2104-2001 |
高级航空涡轮机材料和元件的放射性检验的标准实施规程 |
Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components |
| ASTM C 1502-2001 |
测定二氧化铀和氧化钆中氯和氟的总含量的标准试验方法 |
Standard Test Method for Determination of Total Chlorine and Fluorine in Uranium Dioxide and Gadolinium Oxide |
| ASTM B 563-2001 |
电接触用钯银铜合金标准规范 |
Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy |
| ASTM D 562-2001 |
采用Stormer-型粘度计测量Krebs单位用的涂料粘稠度的标准试验方法 |
Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer |
| ASTM A 309-2001 |
用三点试验法测定长镀锌薄钢板镀层重量和成分的标准试验方法 |
Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test |
| ASTM F 2133-2001 |
测定钢结构的绝缘船舱壁和甲板的防火效果的标准试验方法 |
Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Insulated Marine Bulkheads and Decks, Constructed of Steel |
| ASTM D 6665-2001 |
在沸水试验中评价预应力预涂金属耐老化的标准实施规程 |
Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test |
| ASTM C 898-2001 |
与分层磨损层一同使用的冷却液用含大量固体物质的弹性防水薄膜的标准指南 |
Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Separate Wearing Course |
| ASTM F 2132-2001 |
废弃医用针头和其它尖锐物用的容器使用的材料抗穿透性的标准规范 |
Standard Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps |
| ASTM D 3809-2001 |
电容器用合成介质电解液的标准试验方法 |
Standard Test Methods for Synthetic Dielectric Fluids For Capacitors |
| ASTM D 2475-2001 |
毛毡标准规范 |
Standard Specification for Felt |
| ASTM D 6675-2001 |
机动车薄钢板上有机涂层的盐加速户外表面腐蚀试验的标准实施规程 |
Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
| ASTM D 6658-2001 |
通过烘炉干燥测定湿铬鞣革的挥发性物质(湿度)的标准试验方法 |
Standard Test Method for Volatile Matter (Moisture) of Wet Blue by Oven Drying |
| ASTM F 1760-2001 |
含有再加工-再生材料的共挤压聚氯乙烯无压塑料管的标准规范 |
Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content |
| ASTM B 683-2001 |
纯钯电接触材料标准规范 |
Standard Specification for Pure Palladium Electrical Contact Material |
| ASTM B 541-2001 |
电接触用金合金标准规范 |
Standard Specification for Gold Electrical Contact Alloy |
| ASTM E 1461-2001 |
闪光法测定固定导热性的标准试验方法 |
Standard Test Method for Thermal Diffusivity of Solids by the Flash Method |
| ASTM D 6069-2001 |
通过氧化燃烧和还原压力化学发光检测法测定航空用碳氢化合物中痕量氮的标准试验方法 |
Standard Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection |
| ASTM D 3424-2001 |
印刷品的相对光照牢度和耐气候性评定的标准试验方法 |
Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter |
| ASTM F 1476-2001 |
管道用装衬垫的机械联接器性能的标准规范 |
Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications |
| ASTM D 6686-2001 |
覆层抗丹宁着色评定的标准试验方法 |
Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings |
| ASTM D 6688-2001 |
夹层法测定印刷品耐液态化学品腐蚀性的标准试验方法 |
Standard Test Method for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Method |
| ASTM D 6660-2001 |
自动相变法测定含水乙二醇基发动机冷却剂凝固点的标准试验方法 |
Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method |
| ASTM F 1176-2001 |
最大工作压力为125psi的地下热塑灌溉系统设计和安装的标准实施规程 |
Standard Practice for Design and Installation of Underground Thermoplastic Irrigation Systems With Maximum Working Pressure of 125 psi |
| ASTM D 6571-2000 |
用静力荷载测定高蓬松度非编织物的耐压缩和回复性的标准试验方法 |
Standard Test Method for Determination of Compression Resistance and Recovery Properties of Highloft Nonwoven Fabric Using Static Force Loading |
| ASTM E 2232-2002 |
辐射处理中计算吸收剂量的数学方法的选择和使用的标准指南 |
Standard Guide for Selection and Use of Mathematical Methods for Calculating Absorbed Dose in Radiation Processing Applications |
| ASTM E 2226-2002 |
软管流使用规程 |
Standard Practice for Application of Hose Stream |
| ASTM D 6676-2001 |
用内部加热测定高温下外部管道镀层的阴极断接的标准试验方法 |
Standard Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated Temperatures Using Interior Heating |
| ASTM D 5482-2001 |
石油产品蒸气压力的标准试验方法(大气的小型法) |
Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method-Atmospheric) |
| ASTM F 2072-2001 |
薄膜开关软管洗涤的标准实施规程 |
Standard Practice for Hosedown of a Membrane Switch |
| ASTM B 522-2001 |
金银铂电接触合金标准规范 |
Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy |
| ASTM D 6668-2001 |
F=0和F=1的易燃性额定值间的区分的标准试验方法 |
Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1 |
| ASTM E 2140-2001 |
通过静水压头测试金属屋顶格间水渗透性的标准试验方法 |
Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head |
| ASTM D 1296-2001 |
挥发性溶剂和烯释剂气味的标准试验方法 |
Standard Test Method for Odor of Volatile Solvents and Diluents |
| ASTM C 877M-2001 |
混凝土管、人孔和预制箱形截面用外部密封带的标准规范(米制) |
Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections [Metric] |
| ASTM C 1021-2001 |
建筑密封料试验用实验室的标准实施规程 |
Standard Practice for Laboratories Engaged in the Testing of Building Sealants |
| ASTM C 1127-2001 |
有整体磨损表面的高固体含量及冷液处理的弹性防水薄膜材料的应用标准指南 |
Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface |
| ASTM D 6013-2000 |
测定皮革耐洗涤局部稳定性的标准试验方法 |
Standard Test Method for Determination of Area Stability of Leather to Laundering |
| ASTM C 1421-2001 |
室温下高级陶瓷断裂韧性测定的标准试验方法 |
Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures |
| ASTM A 1010/A 1010M-2001 |
高强度马氏体不锈钢板材、薄板和带材的标准规范 |
Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip |
| ASTM D 4068-2001 |
隐蔽水容器隔膜用氯化聚乙烯薄片的标准规范 |
Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane |
| ASTM F 2001-2001 |
开发电子数据库和船舶安全记录用与船舶有关的技术信息标准指南 |
Standard Guide for Vessel-Related Technical Information for Use in Developing an Electronic Database and Ship Safety Record |
| ASTM D 6700-2001 |
废轮胎产生的燃料的使用的标准实施规程 |
Standard Practice for Use of Scrap Tire-Derived Fuel |
| ASTM C 1090-2001 |
测量水硬水泥砂浆制圆柱形试样高度变化的标准试验方法 |
Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout |
| ASTM D 897-2001 |
胶粘剂粘结力的抗拉性的标准试验方法 |
Standard Test Method for Tensile Properties of Adhesive Bonds |
| ASTM D 6685-2001 |
纤维制混凝土用织物的试验方法的选择的标准指南 |
Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete |
| ASTM C 1508-2001 |
用X射线荧光光谱测定法UF-6和硝酸铀酰中溴和氯的含量的标准试验方法 |
Standard Test Method for Determination of Bromine and Chlorine in UF6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy |
| ASTM E 505-2001 |
铝和镁压模铸件检验用标准参考射线照相 |
Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings |
| ASTM D 4156-2001 |
妇女和女孩用针织运动服织物的标准性能规范 |
Standard Performance Specification for Women's and Girls' Knitted Sportswear Fabrics |
| ASTM F 1548-2001 |
管道用装衬垫的机械联接器配件性能标准规范 |
Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| ASTM C 1319-2001 |
混凝土格子铺设装置的标准规范 |
Standard Specification for Concrete Grid Paving Units |
| ASTM D 4119-2001 |
男人及男孩用针织衬衫织物的标准性能规范 |
Standard Performance Specification for Men's and Boys' Knitted Dress Shirt Fabrics |
| ASTM D 4153-2001 |
男人、妇女和儿童用机织手帕织物的标准性能规范 |
Standard Performance Specification for Men's, Women's, and Children's Woven Handkerchief Fabrics |
| ASTM E 2158-2001 |
902-928MHz频带微波的专用短程通信物理层的标准规范 |
Standard Specification for Dedicated Short Range Communication (DSRC) Physical Layer Using Microwave in the 902 to 928 MHz Band |
| ASTM D 6713-2001 |
由聚偏氟乙烯制成的挤制和压模制型材的标准规范 |
Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF) |
| ASTM F 2130-2001 |
测量防护服材料对液体杀虫剂的排斥性、抑制能力和渗透性的标准试验方法 |
Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials |
| ASTM E 573-2001 |
内反射光谱学标准实施规程 |
Standard Practices for Internal Reflection Spectroscopy |
| ASTM E 709-2001 |
磁粉粒检验标准指南 |
Standard Guide for Magnetic Particle Examination |
| ASTM E 246-2001 |
用重铬酸盐滴定法测定铁矿石及有关材料中总含铁量的标准试验方法 |
Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titration |
| ASTM C 1331-2001 |
用宽带脉冲反射交互作用法测量高级陶瓷中超声速率的标准试验方法 |
Standard Test Method for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method |
| ASTM D 140-2001 |
沥青材料的抽样标准实施规程 |
Standard Practice for Sampling Bituminous Materials |
| ASTM C 35-2001 |
石膏灰泥中无机物集料标准规范 |
Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster |
| ASTM F 486-2001 |
真空吸尘器的使用和保养手册的编制的标准规程 |
Standard Practice for Preparation of Use and Care Booklets for Vacuum Cleaners |
| ASTM D 6640-2001 |
环境勘察用岩心管样品机获取的土壤的收集和处置的标准实施规程 |
Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations |
| ASTM E 2149-2001 |
在动态接触条件下固定抗菌剂抗菌活性测定的标准试验方法 |
Standard Test Method for Determining the Antimicrobial Activity of Immobilized Antimicrobial Agents Under Dynamic Contact Conditions |
| ASTM A 409/A 409M-2001 |
腐蚀场所或高温下使用的焊接大口径奥氏体钢管标准规范 |
Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
| ASTM A 824-2001 |
链环栅栏用Marcelled拉力金属涂覆钢丝标准规范 |
Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence |
| ASTM E 2143-2001 |
芳烃和多环烃现场取样合格评定用现场便携式光纤同步荧光分光光度计标准实施规程 |
Standard Practice for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons |
| ASTM D 6670-2001 |
室内材料/产品排放的挥发性有机物质的全室测定的标准实施规程 |
Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products |
| ASTM E 693-2001 |
根据每个原子(DPA)、E706(ID)位移辨别铁和低合金钢中子照射特性的标准实施规程 |
Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA), E 706(ID) |
| ASTM D 3133-2001 |
用红外线光谱测定法对醇酸天然漆中硝酸纤维素定量测定的标准试验方法 |
Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry |
| ASTM C 1045-2001 |
在稳态条件下计算热传递性能的标准规程 |
Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
| ASTM C 1104/C 1104M-2000 |
测定未覆面矿物纤维绝缘材料蒸汽的吸收率的标准试验方法 |
Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation |
| ASTM F 537-2001 |
木材及有关材料制栅栏结构的设计、制造及安装标准规范 |
Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials |
| ASTM E 2051-2001 |
用场移动式电解分析测定涂料中的铅、沉降尘埃、土壤和空气粒子的标准规程 |
Standard Practice for the Determination of Lead in Paint, Settled Dust, Soil and Air Particulate by Field-Portable Electroanalysis |
| ASTM C 727-2001 |
建筑结构中反射隔热的装置及应用标准实施规程 |
Standard Practice for Installation and Use of Reflective Insulation in Building Constructions |
| ASTM C 901-2001 |
预制砌块标准规范 |
Standard Specification for Prefabricated Masonry Panels |
| ASTM E 1061-2001 |
直读式带液晶头温度计标准规范 |
Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers |
| ASTM D 3260-2001 |
适用于工厂的压制铝制品透明涂层的耐酸和耐灰浆标准试验方法 |
Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products |
| ASTM D 2996-2001 |
纤维缠绕"纤维玻璃"(玻璃纤维增强热固性树脂管)标准规范 |
Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ASTM D 3372-2002 |
水中钼含量的标准测试方法 |
Standard Test Method for Molybdenum in Water |
| ASTM D 979-2001 |
沥青铺面混合料取样的标准实施规程 |
Standard Practice for Sampling Bituminous Paving Mixtures |
| ASTM C 242-2001 |
卫生陶瓷和相关制品的标准术语 |
Standard Terminology of Ceramic Whitewares and Related Products |
| ASTM D 6674-2001 |
织物用熟练试验程序的标准指南 |
Standard Guide for Proficiency Test Program for Fabrics |
| ASTM D 4097-2001 |
接触模压的玻璃纤维增强热固树脂耐腐蚀罐标准规范 |
Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
| ASTM D 4116-2001 |
妇女及女孩用针织和机织紧身束腰胸衣织物的标准性能规范 |
Standard Performance Specification for Women's and Girls' Knitted and Woven Corset-Girdle-Combination Fabrics |
| ASTM E 1890-2001 |
验证新领域参考滑动测量系统和设备的标准指南 |
Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment |
| ASTM D 6277-2001 |
使用中红外光谱仪测定火花点火发动机燃料中苯的标准试验方法 |
Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy |
| ASTM E 641-2001 |
农用液压喷嘴的试验的标准方法 |
Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture |
| ASTM F 2117-2001 |
球类运动场垂直回弹特性的标准试验方法.声学测量 |
Standard Test Method for Vertical Rebound Characteristics of Sports Surface/Ball Systems; Acoustical Measurement |
| ASTM A 278/A 278M-2001 |
650华氏温度以下的含压力部件用灰口铁铸件的标准规范 |
Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C) |
| ASTM C 1316-2001 |
使用a252Cf的被动-主动中子计数法在碎片和废料中作核材料无损检定的标准试验方法 |
Standard Test Method for Nondestructive Assay of Nuclear Material in Scrap and Waste by Passive-Active Neutron Counting Using a 252 Cf Shuffler |
| ASTM D 6692-2001 |
海水中放射性同位素标记的聚脂塑料的生物降解性的测定的标准试验方法 |
Standard Test Method for Determining the Biodegradability of Radiolabeled Polymeric Plastic Materials in Seawater |
| ASTM E 2146-2001 |
用聚合酶链反应技术探测人体免疫缺乏病毒HIV-1的核酸类的标准指南 |
Standard Guide for Detection of Nucleic Acid Sequences of the Human Immunodeficiency Virus HIV-1 by the Polymerase Chain Reaction Technique |
| ASTM F 1046-2001 |
试验用人工磨损客车和轻型货车轮胎准备的标准导则 |
Standard Guide for Preparing Artificially Worn Passenger and Light Truck Tires for Testing |
| ASTM F 2135-2001 |
模制排水、污物和通风的短型塑料配件标准规范 |
Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings |
| ASTM B 918-2001 |
锻造铝合金的热处理的标准实施规程 |
Standard Practice for Heat Treatment of Wrought Aluminum Alloys |
| ASTM D 4231-2001 |
可洗涤机织衬衫和运动衫评定的标准实施规范 |
Standard Practice for Evaluation of Launderable Woven Dress Shirts and Sports Shirts |
| ASTM G 146-2001 |
高压、高温精炼氢设备中使用的双金属不锈合金/钢板材非连接性评定的标准实施规程 |
Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service |
| ASTM D 6663-2001 |
单位和家用编织和针织盖被及附属品的标准规范 |
Standard Specification for Woven and Knitted Comforter and Accessory Products for Institutional and Household Use |
| ASTM C 1310-2001 |
使用流体喷射预集中的感应耦合等离子体质谱测量法测定土壤中放射性核素的标准试验方法 |
Standard Test Method for Determining Radionuclides in Soils by Inductively Coupled Plasma-Mass Spectrometry Using Flow Injection Preconcentration |
| ASTM D 3515-2001 |
热搅拌热铺的沥青铺砌混合物标准规范 |
Standard Specification for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures |
| ASTM A 773/A 773M-2001 |
使用D-C电磁滞曲线记录仪的参数处理和环型材料的D-C磁性能的标准试验方法 |
Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs |
| ASTM D 5821-2001 |
粗集料中碎颗粒百分率测定的标准试验方法 |
Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate |
| ASTM D 4232-2001 |
男人和妇女用服装及职业工作人员工作服织物的标准性能规范 |
Standard Performance Specification for Men's and Women's Dress and Vocational Career Apparel Fabrics |
| ASTM D 4235-2001 |
妇女和女孩用针织女衬衫和服装织物标准性能规范 |
Standard Performance Specification for Women's and Girls' Knitted Blouse and Dress Fabrics |
| ASTM D 6703-2001 |
自动HEITHAUS滴定分析法的标准试验方法 |
Standard Test Method for Automated Heithaus Titrimetry |
| ASTM D 4154-2001 |
男人和男孩用针织和机织海滨服和运动衫织物的标准性能规范 |
Standard Performance Specification for Men's and Boys' Knitted and Woven Beachwear and Sports Shirt Fabrics |
| ASTM D 4155-2001 |
妇女和女孩用机织运动服装、短裤、宽松的长裤和套服织物的标准性能规范 |
Standard Performance Specification for Women's and Girls' Woven Sportswear, Shorts, Slacks, and Suiting Fabrics |
| ASTM D 6612-2000 |
用自动试验机测定纱线支数和纱线支数的变化性的标准试验方法 |
Standard Test Method for Yarn Number and Yarn Number Variability Using Automated Tester |
| ASTM A 1019/A 1019M-2001 |
排污和排水用聚合物预涂的直径为36英寸或不足36英寸的闭合肋钢管的标准规范 |
Standard Specification for Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, Polymer Precoated for Sewers and Drains |
| ASTM D 6704-2001 |
沥青冷混合修补材料的实用性的测定的标准试验方法 |
Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material |
| ASTM F 2091-2001 |
碟状体菌柄标准规范 |
Standard Specification for Acetabular Prostheses |
| ASTM F 1499-2001 |
共挤制复合排水、排污、通风管(DWV)的标准规范 |
Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV) |
| ASTM D 2603-2001 |
含油聚合物的声波切变稳定性试验方法 |
Test Method for Sonic Shear Stability of Polymer-Containing Oils |
| ASTM D 2680-2001 |
丙烯腈-丁二烯-苯乙烯(ABS)和聚氯乙烯(PVC)共聚物污水管的标准规范 |
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping |
| ASTM F 2092-2001 |
燃气或电对流炉标准规范 |
Standard Specification for Convection Oven Gas or Electric |
| ASTM D 2990-2001 |
塑料的拉伸、压缩、弯曲蠕变及蠕变断裂的标准试验方法 |
Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics |
| ASTM D 2105-2001 |
玻璃纤维增强热固树脂管纵向抗张特性的标准试验方法 |
Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube |
| ASTM B 488-2001 |
工程用电解沉积镀金层标准规范 |
Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses |
| ASTM D 6706-2001 |
测量土壤中土工合成织物拉起阻力的标准试验方法 |
Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil |
| ASTM E 516a-1995 |
气相色谱法中使用的导热探测器测试的标准实施规范 |
Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography |
| ASTM D 4300-2001 |
胶粘膜支持或阻止霉菌生长能力的标准试验方法 |
Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
| ASTM F 641a-1998 |
可植入的环氧树脂电子胶囊密封材料标准规范 |
Standard Specification for Implantable Epoxy Electronic Encapsulants |
| ASTM F 702a-1998 |
医用聚砜树脂标准规范 |
Standard Specification for Polysulfone Resin for Medical Applications |
| ASTM C 115a-1996 |
用浊度计测定硅酸盐水泥细度的标准试验方法 |
Standard Test Method for Fineness of Portland Cement by the Turbidimeter |
| ASTM D 2805a-1996 |
反射计法测试涂料遮盖力的标准测试方法 |
Standard Test Method for Hiding Power of Paints by Reflectometry |
| ASTM D 5100a-1995 |
矿物集了与热沥青粘合性的标准试验方法 |
Standard Test Method for Adhesion of Mineral Aggregate to Hot Bitumen |
| ASTM E 467a-1998 |
轴向疲劳试验系统中恒振幅动态力验证的标准实施规范 |
Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System |
| ASTM D 4312a-1995 |
焦油和硬沥青中甲苯不溶物含量的标准试验方法(短期法) |
Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method) |
| ASTM D 4391a-1993 |
纺织品燃烧特性相关的标准术语 |
Standard Terminology Relating to The Burning Behavior of Textiles |
| ASTM D 5540a-1994 |
用于流水取样和分析的流量和温度控制标准实施规程 |
Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis |
| ASTM D 2924-2001 |
增强的热固树脂管抗外部压力性能的标准试验方法 |
Standard Test Method for External Pressure Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ASTM D 2925-2001 |
在满管水流情况下玻璃纤维增强热固树脂管射束偏转的标准试验方法 |
Standard Test Method for Beam Deflection of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow |
| ASTM D 5680a-1995 |
圆筒或类似容器内未固结粒子取样的标准实施规程 |
Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers |
| ASTM C 631a-1995 |
内部石膏粉刷用粘合化合物标准规范 |
Standard Specification for Bonding Compounds for Interior Gypsum Plastering |
| ASTM D 995b-1995 |
热搅拌、热铺沥青铺面混合料用搅拌设备的标准规范 |
Standard Specification for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures |
| ASTM C 827a-2001 |
胶结混合料制圆柱形试样早期高度变化的标准测试方法 |
Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures |
| ASTM D 2170a-2001 |
沥青运动粘度的标准试验方法 |
Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens) |
| ASTM D 2711a-2001 |
润滑油的反乳化性的标准试验方法 |
Standard Test Method for Demulsibility Characteristics of Lubricating Oils |
| ASTM D 3370a-1995 |
从关闭水管中的抽取水样的标准操作规程 |
Standard Practices for Sampling Water from Closed Conduits |
| ASTM D 3375a-1995 |
混合粒子层中离子交换材料的离子交换柱容量的标准试验方法 |
Standard Test Method for Column Capacity of Particulate Mixed Bed Ion Exchange Materials |
| ASTM F 1986-2001 |
冷热饮用水系统用2型多层管、压合配件和压合接头的标准规范 |
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems |
| ASTM C 833-2001 |
烧结的二氧化铀、钚芯块标准规范 |
Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets |
| ASTM D 4179-2001 |
成型单粒催化剂压碎强度的标准试验方法 |
Standard Test Method for Single Pellet Crush Strength of Formed Catalyst Shapes |
| ASTM D 3701-2001 |
低分辨核磁共振光谱法测定航空涡轮机燃料中氢含量的标准试验方法 |
Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry |
| ASTM F 610/F 610Ma-2000 |
通过热转换技术评定模压聚氯乙烯(PVC)塑料管配件质量的标准试验方法 |
Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique |
| ASTM E 1477a-1998 |
使用集成球形反射计测定音响材料反光因素的标准试验方法 |
Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers |
| ASTM D 6669a-2001 |
醇酸和乳胶内部涂料暴露评定用暴露方案的选择和设计的标准实施规范 |
Standard Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints |
| ASTM D 2112a-2001 |
用压力容器法测定防腐蚀矿物绝缘油氧化稳定性的标准试验方法 |
Standard Test Method for Oxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel |
| ASTM D 6266a-2000 |
由VOC控制装置内除去的涂层和水载汽车涂层中释放的挥发性有机物(VOC)的总量测定的试验方法 |
Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
| ASTM D 3718a-1985 |
用原子吸收分光光度法测定涂料中低浓度铬的标准试验方法 |
Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy |
| ASTM D 4712a-1987 |
检验工业用水的标准指南.可还原涂层 |
Standard Guide for Testing Industrial Water-Reducible Coatings |
| ASTM A 734/A 734Ma-1987 |
经淬火和回火的合金钢与高强度低合金钢压力容器板标准规范 |
Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered |
| ASTM F 149b-1992 |
与光学字符识别相关的标准术语 |
Standard Terminology Relating to Optical Character Recognition |
| ASTM F 682a-1982 |
锻制碳素钢套筒型管联接器标准规范 |
Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings |
| ASTM F 1756a-1997 |
实现舰队管理系统网络的标准指南 |
Standard Guide for Implementation of a Fleet Management System Network |
| ASTM A 350/A 350Mc-2000 |
管道部件用要求切口韧性试验的碳素钢与低合金钢锻件的标准规范 |
Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components |
| ASTM E 1688a-2000 |
海底无脊椎动物所致沉积物有关污染物的生物累积测定的标准指南 |
Standard Guide for Determination of the Bioaccumulation of Sediment-Associated Contaminants by Benthic Invertebrates |
| ASTM E 1732a-1996 |
法医学相关标准术语 |
Standard Terminology Relating to Forensic Science |
| ASTM C 987a-2000 |
炉上层结构用耐火材料的蒸气冲击标准实施规范 |
Standard Practice for Vapor Attack on Refractories for Furnace Superstructures |
| ASTM D 1043-2002 |
用扭转试验法测定温度对塑料强度变化的标准试验方法 |
Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test |
| ASTM D 3972-2002 |
用放射化学法测量水中同位素铀的标准试验方法 |
Standard Test Method for Isotopic Uranium in Water by Radiochemistry |
| ASTM D 4309-2002 |
为测定水中总的金属含量用密闭容器微波加热技术煮解样品的标准规程 |
Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water |
| ASTM D 4382-2002 |
用石墨炉原子吸收分光光度法对水中钡的标准试验方法 |
Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace |
| ASTM D 4962-2002 |
用NaI(TI)γ射线光谱法处理水的标准规程 |
Standard Practice for NaI(Tl) Gamma-Ray Spectrometry of Water |
| ASTM D 5934-2002 |
用三点弯曲法测定在装载控制速度下刚性和半刚性塑料样品的弹性模量的标准试验方法 |
Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending |
| ASTM E 1115-2002 |
外科手用擦洗剂配方评估的试验方法 |
Test Method for Evaluation of Surgical Hand Scrub Formulations |
| ASTM D 6495-2002 |
土工粘土衬认可检验要求的标准指南 |
Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners |
| ASTM E 1930-2002 |
用声音扩散检验充液的大气和低压金属储藏箱的标准试验方法 |
Standard Test Method for Examination of Liquid Filled Atmospheric and Low Pressure Metal Storage Tanks Using Acoustic Emission |
| ASTM D 6726-2001 |
地球物理测量钻孔的标准指南.电磁感应 |
Standard Guide for Conducting Borehole Geophysical Logging-Electromagnetic Induction |
| ASTM D 6727-2001 |
地球物理测量钻孔的标准指南.中子 |
Standard Guide for Conducting Borehole Geophysical Logging-Neutron |
| ASTM F 1735-2002 |
修复带人孔管道的PVC衬底用聚氯乙烯(PVC)异型带材的标准规范 |
Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits |
| ASTM F 2169-2002 |
弹性楼梯踏步的标准规范 |
Standard Specification for Resilient Stair Treads |
| ASTM E 1352-2002 |
模型化装软垫的组合家俱的抗烟卷点燃性的标准试验方法 |
Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies |
| ASTM E 2371-2004 |
用原子辐射等离子体光谱测定法分析钛和钛合金的标准试验方法 |
Standard Test Method for Analysis of Titanium and Titanium Alloys by Atomic Emission Plasma Spectrometry |
| ASTM C 871-2004 |
可浸出氯化物、氟化物、硅酸盐及钠离子用绝热材料的化学分析的标准试验方法 |
Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions |
| ASTM D 501-2003 |
碱性洗涤剂的取样和化学分析的标准试验方法 |
Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents |
| ASTM D 4649-2003 |
拉伸卷缠薄膜的选择和使用标准指南 |
Standard Guide for Selection and Use of Stretch Wrap Films |
| ASTM D 2065-2003 |
在表面活化剂加速潮湿应力下测定组合木材产品边缘特性的标准试验方法 |
Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress |
| ASTM D 2051-2003 |
拉链表面漆耐洗性能的标准试验方法 |
Standard Test Method for Durability of Finish of Zippers to Laundering |
| ASTM D 2058-2003 |
拉链表面漆耐干洗性能的标准试验方法 |
Standard Test Method for Durability of Finish of Zippers to Drycleaning |
| ASTM D 2059-2003 |
拉链抗盐雾腐蚀的标准试验方法 |
Standard Test Method for Resistance of Zippers to Salt Spray (Fog) |
| ASTM F 1116-2003 |
测定绝缘鞋靴介电强度的标准试验方法 |
Standard Test Method for Determining Dielectric Strength of Dielectric Footwear |
| ASTM F 1-2003 |
电子管用镀镍和敷镍钢带标准规范 |
Standard Specification for Nickel-Clad and Nickel-Plated Steel Strip for Electron Tubes |
| ASTM D 1327-2004 |
铺屋面和防水用浸沥青机织粗麻布织物的标准规范 |
Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing |
| ASTM G 85-2002 |
对金属进行盐喷雾(雾化)磨损试验的标准实施规程 |
Standard Practice for Modified Salt Spray (Fog) Testing |
| ASTM A 1012-2002 |
无缝和焊接铁素体、奥氏体和双合金钢冷凝器和带整体散热片的热交换器管的标准规范 |
Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins |
| ASTM E 2178-2003 |
建筑材料透气性的标准试验方法 |
Standard Test Method for Air Permeance of Building Materials |
| ASTM D 3549-2003 |
压实沥青铺面混合料样品的厚度或高度的标准试验方法 |
Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens |
| ASTM C 1287-2003 |
用感应耦合等离子体质谱法测定二氧化铀中混杂物的标准试验方法 |
[Standard Test Method for Determination of Impurities in Uranium Dioxide by Inductively Coupled Plasma Mass Spectrometry |
| ASTM B 765-2003 |
电镀层和相关金属镀层孔隙率和总缺陷试验选择的标准指南 |
Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings |
| ASTM D 6884-2003 |
活节混凝土块护坡系统安装的标准实施规程 |
Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems |
| ASTM B 213-2003 |
金属粉末流速的标准试验方法 |
Standard Test Method for Flow Rate of Metal Powders |
| ASTM C 557-2003 |
在木结构上固定石膏护墙板用胶粘剂标准规范 |
Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 2737-2003 |
聚乙烯(PE)塑料管标准规范 |
Standard Specification for Polyethylene (PE) Plastic Tubing |
| ASTM D 3167a-2003 |
胶粘剂的浮动滚筒抗剥离标准试验方法 |
Standard Test Method for Floating Roller Peel Resistance of Adhesives |
| ASTM D 2732-2003 |
塑料薄膜和薄板的自由线性热收缩率的标准试验方法 |
Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting |
| ASTM D 2813-2003 |
物理和化学试验用皮革取样的标准实施规范 |
Standard Practice for Sampling Leather for Physical and Chemical Tests |
| ASTM D 3130-2003 |
n-丙烯酸(96%级)标准规范 |
Standard Specification for n-Propyl Acetate (96 % Grade) |
| ASTM D 1977-2003 |
用氢氟酸/硫酸分解和原子光谱法分析FCC平衡催化剂中镍和钒的标准试验方法 |
Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis |
| ASTM D 2086-2003 |
乙酸基乙烯酯和乙醛酸度的标准试验方法 |
Standard Test Method for Acidity in Vinyl Acetate and Acetaldehyde |
| ASTM C 1163-2003 |
使用氟化钕的α光谱法用的锕系元素测定的标准实施规范 |
Standard Practice for Mounting Actinides for Alpha Spectrometry Using Neodymium Fluoride |
| ASTM E 661-2003 |
在集中静载荷和冲击载荷下木制及木基楼板和屋顶覆盖层性能的标准试验方法 |
Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads |
| ASTM D 1640-2003 |
室温下有机涂料干燥、固化或成膜的标准试验方法 |
Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature |
| ASTM D 5329-2004 |
沥青及硅酸盐水泥混凝土路面上接缝与裂纹用热铺密封料和填充料的标准试验方法 |
Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements |
| ASTM D 6377-2003 |
原油蒸气压力测定的标准试验方法:VPCRx(膨胀法) |
Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method) |
| ASTM D 669-2003 |
与层压薄板材和中厚板材平行的层片的耗散系数和介电常数的标准试验方法 |
Standard Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials |
| ASTM D 3296-2003 |
FEP-碳氟化合物管的标准规范 |
Standard Specification for FEP-Fluorocarbon Tube |
| ASTM B 211M-2003 |
铝及铝合金棒材、条材和线材(米制)标准规范 |
Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric] |
| ASTM B 211-2003 |
铝及铝合金棒材、条材和线材标准规范 |
Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire |
| ASTM D 3568-2003 |
橡胶的标准试验方法.评价包括与油混合的EPDM(三聚乙丙橡胶) |
Standard Test Methods for Rubber - Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil |
| ASTM F 1632-2003 |
高尔夫球场用绿呢和运动场草皮根层混合物的粒径分析和沙形状分级的标准试验方法 |
Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes |
| ASTM F 2019-2003 |
通过玻璃纤维增强塑料(GRP)现场硫化热固性树脂管(CIPP)的现场拖拉安装修复已有管道的标准操作规程 |
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP) |
| ASTM D 3848-2003 |
橡胶的标准试验方法.评价与碳黑混合的NBR(苯烯腈-丁二烯共聚物) |
Standard Test Methods for Rubber - Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black |
| ASTM C 230/C 230M-2003 |
水凝水泥试验用流量表的标准规范 |
Standard Specification for Flow Table for Use in Tests of Hydraulic Cement |
| ASTM F 25-2004 |
洁净室及其它防尘区域空气中粒状杂质的测量和计数的标准试验方法 |
Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas |
| ASTM F 855-2004 |
断开的电力线及设备上使用的临时保护性接地装置的标准规范 |
Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment |
| ASTM C 735-2004 |
可反复使用玻璃啤酒容器及饮料容器上陶瓷装饰耐酸性的标准试验方法 |
Standard Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass Containers |
| ASTM D 3524-2004 |
气相色谱法测定用过的柴油发动机油中柴油燃料稀释剂的标准试验方法 |
Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography |
| ASTM C 1504M-2004 |
涵洞和雨水管用预制钢筋混凝土三边结构制造的标准规范(米制) |
Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric) |
| ASTM C 1504-2004 |
涵洞和雨水管用预制钢筋混凝土三边结构制造的标准规范 |
Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains |
| ASTM B 401-2004 |
致密圆形钢芯加强同心绞捻铝导线(ACSR/COMP)标准规范 |
Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP) |
| ASTM E 2113-2004 |
热机分析仪长度变化校正的标准试验方法 |
Standard Test Method for Length Change Calibration of Thermomechanical Analyzers |
| ASTM E 2413-2004 |
医院准备状态和应对措施的标准指南 |
Standard Guide for Hospital Preparedness and Response |
| ASTM E 439a-2004 |
铍化学分析的标准试验方法 |
Standard Test Methods for Chemical Analysis of Beryllium |
| ASTM D 4929-2004 |
原油中有机氯化物含量测定的标准试验方法 |
Standard Test Methods for Determination of Organic Chloride Content in Crude Oil |
| ASTM D 3377-2004 |
无溶剂清漆重量损失的标准试验方法 |
Standard Test Method for Weight Loss of Solventless Varnishes |
| ASTM C 1371a-2004 |
使用便携式发射计测定近室温材料辐射的标准试验方法 |
Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers |
| ASTM D 5779a-1995 |
为冲刷控制现场测定岩石和人造材料的特殊外观重力的标准试验方法 |
Standard Test Method for Field Determination of Apparent Specific Gravity of Rock and Manmade Materials for Erosion Control |
| ASTM D 596-2001 |
水分析结果报告的标准指南 |
Standard Guide for Reporting Results of Analysis of Water |
| ASTM D 3361-2001 |
用非滤光碳弧型装置测定涂料和有关涂层的标准实施规程 |
Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
| ASTM F 1350-2001 |
锻造18铬-14镍-2.5钼不锈钢外科固定用线标准规范 |
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673) |
| ASTM D 3840-2001 |
无压设备用玻璃纤维增强热固树脂管配件标准规范 |
Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications |
| ASTM D 4426-2001 |
木材层压板用液态酚醛树脂中非挥发物含量百分比测定的标准试验方法 |
Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating |
| ASTM A 943/A 943M-2001 |
喷模制无缝奥氏体不锈钢管的标准规范 |
Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes |
| ASTM E 2152-2001 |
由双谱光度学数据得到的荧光物颜色计算的标准操作规程 |
Standard Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data |
| ASTM D 2364-2001 |
羟基乙基纤维素的标准试验方法 |
Standard Test Methods for Hydroxyethylcellulose |
| ASTM C 395-2001 |
耐化学腐蚀的树脂灰浆标准规范 |
Standard Specification for Chemical-Resistant Resin Mortars |
| ASTM A 949/A 949M-2001 |
喷模制无缝铁素体/奥氏体不锈钢管的标准规范 |
Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe |
| ASTM F 1380a-1995 |
聚丁烯(PB)管用金属插入配件标准规范 |
Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing |
| ASTM F 1457b-1994 |
激光打印机的相关标准术语 |
Standard Terminology Relating to Laser Printers |
| ASTM D 3780a-1995 |
男人及男孩用机织套装织物及机织运动夹克、运动裤及裤子织物的标准性能规范 |
Standard Performance Specification for Mens and Boys Woven Dress Suit Fabrics and Woven Sportswear Jacket, Slack, and Trouser Fabrics |
| ASTM E 1779a-1996 |
进行室外噪声测量的测量方案的拟定用标准指南 |
Standard Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements |
| ASTM D 1668a-1997 |
屋顶和防水用玻璃纤维织物(机织并经处理)的标准规范 |
Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing |
| ASTM E 415a-1999 |
碳和低合金钢光辐射真空光谱测定分析的标准试验方法 |
Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel |
| ASTM E 1778a-1998 |
有关路面龟裂的标准术语 |
Standard Terminology Relating to Pavement Distress |
| ASTM D 3783a-1995 |
男人及男孩衣服用机织平纹衬里织物的标准性能规范 |
Standard Performance Specification for Woven Flat Lining Fabrics for Mens and Boys Apparel |
| ASTM F 1987-2001 |
热水供暖系统用2型多层管压缩配件和管联结件的标准规范 |
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems |
| ASTM D 5679a-1995 |
圆筒或类似容器内固结粒子取样的标准实施规程 |
Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers |
| ASTM D 5747a-1995 |
土工薄膜对液体耐化学性评定的标准实施规程 |
Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids |
| ASTM E 1694a-1995 |
办公设备对特殊设备和技术的适用性标准分类 |
Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies |
| ASTM F 724a-1994 |
轮胎侧壁组件抗断裂性能的室外评定标准试验方法 |
Standard Test Method for Outdoor Evaluation of Tire Sidewall Component Cracking Resistance |
| ASTM F 909a-1994 |
与打印机相关的标准术语 |
Standard Terminology Relating to Printers |
| ASTM F 1600a-1995 |
生物治疗标准术语 |
Standard Terminology Relating to Bioremediation |
| ASTM D 2248a-2001 |
有机涂层的耐洗涤剂性能的标准规范 |
Standard Practice for Detergent Resistance of Organic Finishes |
| ASTM F 2164-2002 |
使用静液压的聚乙烯压力管道系统的现场泄漏试验的标准实施规范 |
Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure |
| ASTM F 2158-2001 |
住宅中央真空管及配件的标准规范 |
Standard Specification for Residential Central-Vacuum Tube and Fittings |
| ASTM E 1786-2002 |
在线红外分光光度法测定液氯中水的低等级的标准试验方法 |
Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry |
| ASTM D 709-2001 |
层压热固材料标准规范 |
Standard Specification for Laminated Thermosetting Materials |
| ASTM E 1692a-1995 |
办公设备对办公人员做出的变动的适用性标准分类 |
Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants |
| ASTM B 511-2001 |
镍铁铬硅合金棒和型材标准规范 |
Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes |
| ASTM A 111a-1999 |
电话和电报线路用镀锌"铁"丝的标准规范 |
Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire |
| ASTM C 1175a-1999 |
高级陶瓷无损检验标准及试验方法的标准指南 |
Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics |
| ASTM D 5681a-1998 |
废弃物和废弃物管理的标准术语 |
Standard Terminology for Waste and Waste Management |
| ASTM E 490a-2000 |
标准太阳能常数和气团起始阳光能光谱辐照表 |
Standard Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables |
| ASTM E 2085a-2000 |
医疗保健信息安全框架的标准指南 |
Standard Guide on Security Framework for Healthcare Information |
| ASTM C 1291a-2000 |
高级单片陶瓷的高温抗拉蠕变应变,蠕变应变率及蠕变断裂时间的标准试验方法 |
Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics |
| ASTM D 6769-2002 |
完全粘结的寒冷条件下使用的预制增强改良沥青薄膜防水系统应用的标准指南 |
Standard Guide for Application of Fully Adhered, Cold-Applied, Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems |
| ASTM E 2175-2001 |
规定多角分光光度计几何形状的标准实施规范 |
Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers |
| ASTM D 521-2002 |
锌粉尘(金属锌粉)的化学分析标准试验方法 |
Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder) |
| ASTM D 6558a-2000 |
测定碳阳极和阴极块的TGA CO2反应性的标准试验方法 |
Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks |
| ASTM A 179/A 179Ma-1990 |
热交换器和冷凝器用无缝冷拉低碳钢管标准规范 |
Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes |
| ASTM E 1662a-1995 |
办公设备对于视听环境的适用性标准分类 |
Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment |
| ASTM D 3623a-1978 |
在浅浸状态下防污板的标准试验方法 |
Standard Test Method for Testing Antifouling Panels in Shallow Submergence |
| ASTM D 3717a-1985 |
用原子吸收分光光度法测定涂料中低浓度锑的标准试验方法 |
Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy |
| ASTM D 5651a-1995 |
木质纤维和碎料人造板表面粘结强度的标准试验方法 |
Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials |
| ASTM D 5909a-1996 |
用角鲨烯抗性测试氧化物干燥印刷油墨干燥时间的标准试验方法 |
Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance |
| ASTM D 2584-2002 |
固化的增强树脂燃烧损失的标准试验方法 |
Standard Test Method for Ignition Loss of Cured Reinforced Resins |
| ASTM D 3914-2002 |
挤拉制玻璃纤维增强塑料棒平面剪切强度的标准测试方法 |
Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod |
| ASTM F 2165-2002 |
挠性预绝缘管标准规范 |
Standard Specification for Flexible Pre-Insulated Piping |
| ASTM D 3916-2002 |
挤拉制玻璃纤维增强塑料棒抗拉特性的标准试验方法 |
Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod |
| ASTM D 6749-2002 |
石油产品倾点的标准测试方法(自动气压法) |
Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method) |
| ASTM D 3928a-2000 |
评价光泽度或光泽均匀性的标准试验方法 |
Standard Test Method for Evaluation of Gloss or Sheen Uniformity |
| ASTM D 4691-2002 |
火焰原子吸收分光光度法测定水中元素的标准实施规范 |
Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry |
| ASTM D 1790-2002 |
用冲击法测定塑料薄板的脆化温度的标准试验方法 |
Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact |
| ASTM D 5624-2002 |
测定表面处理的横向集料扩展率的标准试验方法 |
Standard Test Method for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications |
| ASTM E 2191-2002 |
利用声辐射检查充气的丝绕复合材料压力容器的标准试验方法 |
Standard Test Method for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission |
| ASTM E 165-2002 |
液体渗透剂检验的标准试验方法 |
Standard Test Method for Liquid Penetrant Examination |
| ASTM D 5985-2002 |
石油产品倾点的标准测试方法(旋转法) |
Standard Test Method for Pour Point of Petroleum Products (Rotational Method) |
| ASTM F 918-2002 |
不掺碳酸气的机械冷藏饮料自动售货机(可见产品)的标准规范 |
Standard Specification for Noncarbonated Mechanically Refrigerated, Beverage Dispenser (Visible Product) |
| ASTM F 2112-2002 |
薄膜开关的标准术语 |
Standard Terminology for Membrane Switches |
| ASTM E 2142-2001 |
利用扫描电子显微镜测定钢中杂质的额定值和分级的标准试验方法 |
Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope |
| ASTM D 4385-2002 |
热固性增强塑料挤拉制产品中可见缺陷分类的标准实施规范 |
Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products |
| ASTM D 4475-2002 |
用短梁法测定挤拉制增强塑料棒表观水平剪切强度的标准试验方法 |
Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By The Short-Beam Method |
| ASTM E 290a-1997 |
材料延展性的弯曲测试的标准试验方法 |
Standard Test Methods for Bend Testing of Material for Ductility |
| ASTM E 2020a-1999 |
在污染场地进行生态危险评估用数据和信息选择的标准指南 |
Standard Guide for Data and Information Options for Conducting an Ecological Risk Assessment at Contaminated Sites |
| ASTM F 1407a-1999 |
化学防护服装材料耐液体渗透性的标准试验方法.渗透杯法 |
Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation-Permeation Cup Method |
| ASTM E 1933a-1999 |
使用红外成像辐射计测量和补偿发射率的标准试验方法 |
Standard Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers |
| ASTM F 1173-2001 |
船舶用热固性树脂玻璃纤维管道系统标准规范 |
Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications |
| ASTM E 2170-2001 |
在甲烷条件下有机化学药品厌氧生物降解潜力测定的标准试验方法 |
Standard Test Method for Determining Anaerobic Biodegradation Potential of Organic Chemicals Under Methanogenic Conditions |
| ASTM D 6699-2001 |
使用提桶进行液体取样的标准实施规范 |
Standard Practice for Sampling Liquids Using Bailers |
| ASTM E 1317a-1997 |
船舶表面涂层易燃性的标准试验方法 |
Standard Test Method for Flammability of Marine Surface Finishes |
| ASTM E 1321a-1997 |
测定材料引燃和火焰蔓延性能的标准试验方法 |
Standard Test Method for Determining Material Ignition and Flame Spread Properties |
| ASTM E 1860a-1997 |
作用时间校正热分析仪的标准试验方法 |
Standard Test Method for Elapsed Time Calibration Thermal Analyzers |
| ASTM B 413a-1997 |
精炼银标准规范 |
Standard Specification for Refined Silver |
| ASTM C 1073a-1997 |
用碱性反应法测定粉炉渣水硬效率的标准试验方法 |
Standard Test Method for Hydraulic Activity of Ground Slag by Reaction with Alkali |
| ASTM D 5965-2002 |
涂层粉末比重的标准测试方法 |
Standard Test Methods for Specific Gravity of Coating Powders |
| ASTM E 2177-2001 |
标准潮湿条件下路面标记反射亮度系数测量的标准试验方法 |
Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness |
| ASTM D 6736-2001 |
试验方法 |
Standard Test Method for Burnish Resistance of Latex Paints |
| ASTM D 3309a-1996 |
聚丁烯(PB)塑料热水及冷水分布系统的标准规范 |
Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems |
| ASTM F 1108a-1997 |
外科移植用Ti6Al4V合金铸件(UNS R56406)标准规范 |
Standard Specification for Ti6Al4V Alloy Castings for Surgical Implants (UNS R56406) |
| ASTM D 2598-2002 |
通过组分分析计算液化石油气的某些物理性质的标准实施规范 |
Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis |
| ASTM D 5508a-1994 |
液面上毛细管气相色谱法测定苯乙烯-丙烯腈共聚物树脂和腈-丁二烯橡胶中残留丙烯腈单体的标准试验方法 |
Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC) |
| ASTM D 1856a-1995 |
用阿布松(Abson)法从溶液中回收沥青的标准试验方法 |
Standard Test Method for Recovery of Asphalt From Solution by Abson Method |
| ASTM D 3624a-1985 |
用原子吸收分光光度法测定涂料中低浓度汞的标准试验方法 |
Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy |
| ASTM C 694a-1990 |
薄钢板在硫酸溶液浸渍过程中重量损失(质量损失)的标准试验方法 |
Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution |
| ASTM C 1016-2002 |
密封剂背衬(填缝)料吸水率测定的标准试验方法 |
Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material |
| ASTM D 4555-2001 |
现场单轴压缩试验测定软岩石的可加工性和强度的标准试验方法 |
Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test |
| ASTM D 4609-2001 |
土壤稳定用化学品效果评定的标准指南 |
Standard Guide for Evaluating Effectiveness of Chemicals for Soil Stabilization |
| ASTM D 6763-2002 |
外部木染料测试的标准指南 |
Standard Guide for Testing Exterior Wood Stains |
| ASTM D 5971-2001 |
新混合配制的低强度材料抽样的标准实施规范 |
Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material |
| ASTM D 2338-2002 |
彩色喷漆颗粒大小测定的标准试验方法 |
Standard Test Method for Determining Particle Size of Multicolor Lacquers |
| ASTM B 47a-1995 |
铜架空电线的标准规范 |
Standard Specification for Copper Trolley Wire |
| ASTM B 605a-1995 |
锡镍合金电解沉积镀层标准规范 |
Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy |
| ASTM C 146a-1994 |
玻璃沙化学分析的标准试验方法 |
Standard Test Methods for Chemical Analysis of Glass Sand |
| ASTM D 522a-1993 |
涂覆有机涂层的芯杆弯曲试验的标准试验方法 |
Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
| ASTM F 964-2002 |
护栏用硬质聚氯乙烯外部轮廓的标准规范 |
Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing |
| ASTM F 1385-2001 |
载油舱平台的标准规程 |
Standard Practice for Platforms in Cargo Tanks |
| ASTM E 1670a-1995 |
办公设备对于操作和维护管理的适用性标准分类 |
Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance |
| ASTM D 5528-2001 |
单向纤维增强聚合母体复合材料I型层间断裂韧性的标准试验方法 |
Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
| ASTM D 3772-2001 |
橡胶指套标准规范 |
Standard Specification for Natural Rubber Finger Cots |
| ASTM F 2162-2001 |
滚针滚柱轴承标准规范:拉制外环、完全配套、无内环、开端和闭端、标准型 |
Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type |
| ASTM F 2163-2001 |
带拉制外环的滚针滚柱轴承用轴承内环标准规范 |
Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring |
| ASTM D 5845-2001 |
用红外线光谱法测定汽油中MTBE、ETBE、TAME、DIPE、甲醇、乙醇和叔丁醇的标准试验方法 |
Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy |
| ASTM F 2161-2001 |
轴承润滑剂测量仪器及精度的标准指南.第1部分:油 |
Standard Guide for Instrument and Precision Bearing Lubricants-Part 1 Oils |
| ASTM E 1268-2001 |
评定显微结构带状物等级或取向的标准实施规范 |
Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures |
| ASTM C 1084-2002 |
硬化水硬水泥混凝土的硅酸盐水泥含量的标准试验方法 |
Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete |
| ASTM D 4679-2002 |
一般用途、家用或护肤用橡胶手套的标准规范 |
Standard Specification for Rubber General Purpose, Household or Beautician Gloves |
| ASTM F 1449-2001 |
耐燃烧、耐热、耐电弧性防护服装的养护和维修标准指南 |
Standard Guide for Care and Maintenance of Flame, Thermally and Arc Resistant Clothing |
| ASTM F 539-2001 |
调整运动鞋使其合适的标准实施规范 |
Standard Practice for Fitting Athletic Footwear |
| ASTM D 2042-2001 |
三氯乙烯中沥青材料溶解性的标准试验方法 |
Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene |
| ASTM D 2493-2001 |
沥青的标准粘度-温度表 |
Standard Viscosity-Temperature Chart for Asphalts |
| ASTM E 2182-2002 |
保健用临床XML DTD的标准规范 |
Standard Specification for Clinical XML DTDs in Healthcare |
| ASTM E 2183-2002 |
XML DTD的设计、构造和实现标准指南 |
Standard Guide for XML DTD Design, Architecture and Implementation |
| ASTM D 3804-2002 |
用EDTA法测定颜料干燥剂中铁含量的标准试验方法 |
Standard Test Method for Iron in Paint Driers by EDTA Method |
| ASTM D 4017-2002 |
卡尔·费舍尔法测定涂料及相关物质中水份的标准试验方法 |
Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method |
| ASTM D 4563-2002 |
原子吸收光谱法测定从全部涂料中回收的颜料中二氧化钛含量的标准试验方法 |
Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint |
| ASTM D 6701-2001 |
水蒸气通过非织造屏障和塑料屏障的传输速率测定的标准试验方法 |
Standard Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers |
| ASTM F 2149-2001 |
细胞自动分析的标准试验方法.单细胞悬浮液计数和分级的电敏域法 |
Standard Test Method for Automated Analyses of Cells-the Electrical Sensing Zone Method of Enumerating and Sizing Single Cell Suspensions |
| ASTM D 3884-2001 |
纺织品耐磨性的标准试验方法(旋转平台,双头法) |
Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) |
| ASTM F 2140-2001 |
食品保温箱性能的标准试验方法 |
Standard Test Method for Performance of Hot Food Holding Cabinets |
| ASTM E 511-2001 |
用康铜环形箔热流计测定热流的标准试验方法 |
Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Gage |
| ASTM F 2138-2001 |
天然气设备用溢流阀标准规范 |
Standard Specification for Excess Flow Valves for Natural Gas Service |
| ASTM F 2145-2001 |
外径受控的聚酰胺11管用聚酰胺11(PA 11)机械配件标准规范 |
Standard Specification for Polyamide 11 (PA 11) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 Pipe and Tubing |
| ASTM D 3561-2002 |
用原子吸收分光光度法测定微咸水,海水和盐水中锂钾和钠离子含量的标准试验方法 |
Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry |
| ASTM E 541-2001 |
从事建成楼房的系统分析和合格保证的机构的标准规范 |
Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building |
| ASTM D 6043-2001 |
永久性和耐久性美术纸选择的标准指南 |
Standard Guide for Selection of Permanent and Durable Artist's Paper |
| ASTM C 71a-2001 |
耐火材料标准术语 |
Standard Terminology Relating to Refractories |
| ASTM C 940a-1998 |
在实验室内测定预置集料混凝土用新混合灌浆料膨胀性和泌浆性的标准试验方法 |
Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory |
| ASTM D 4112a-1995 |
机织伞布织物的标准性能规范 |
Standard Performance Specification for Woven Umbrella Fabrics |
| ASTM D 4066a-2001 |
尼龙注射及挤压材料的标准分类体系 |
Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
| ASTM C 1161-2002 |
环境温度下高级陶瓷抗弯强度标准试验方法 |
Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature |
| ASTM D 3760-2002 |
用气相色谱法分析异丙苯的标准试验方法 |
Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography |
| ASTM F 1762-2002 |
将薄膜开关暴露于变化的大气压下的标准实施规范 |
Standard Practice for Exposing a Membrane Switch to Variation in Atmospheric Pressure |
| ASTM F 1682-2002 |
测定薄膜开关动程的标准试验方法 |
Standard Test Method for Determining Travel of a Membrane Switch |
| ASTM D 6616a-2001 |
在摄氏100度时用锥形承载模拟器粘度计测量高剪切速率时粘度的标准试验方法 |
Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer At 100°C |
| ASTM D 1710-2002 |
挤制和压模聚四氟乙烯(PTFE)杆材和厚壁管材的标准规范 |
Standard Specification for Extruded and Compression Molded Polytetrafluoroethylene (PTFE) Rod and Heavy-Walled Tubing |
| ASTM D 6730-2001 |
用100米毛细管(柱前)高分辨率气相色谱法测定火花点火发动机燃料中各成分的标准试验方法 |
Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography |
| ASTM F 2142-2001 |
抽屉式加热器性能的标准试验方法 |
Standard Test Method for Performance of Drawer Warmers |
| ASTM D 4747-2002 |
用气液色谱法测定乳胶中未反应单体含量的标准试验方法 |
Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography |
| ASTM D 4897-2001 |
屋面材料用沥青涂覆玻璃纤维通风薄基板标准规范 |
Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing |
| ASTM B 173a-2001 |
电导线用同芯绞绳铜导线标准规范 |
Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors |
| ASTM B 69a-2001 |
轧制锌标准规范 |
Standard Specification for Rolled Zinc |
| ASTM B 810a-2001 |
通过铜试棒质量变化对大气腐蚀试验室进行校准的标准试验方法 |
Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons |
| ASTM D 276a-2000 |
识别纺织品中纤维的标准试验方法 |
Standard Test Methods for Identification of Fibers in Textiles |
| ASTM F 2090a-2001 |
带有紧急逃生(出口)分离机构的防窗跌落装置用标准规范 |
Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms |
| ASTM D 4114a-1995 |
妇女及女孩衣服用机织平面衬里织物的标准性能规范 |
Standard Performance Specification for Woven Flat Lining Fabrics for Womens and Girls Apparel |
| ASTM E 1661a-1995 |
办公设备对于会议和聚会效果的适用性标准分类 |
Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness |
| ASTM E 1667a-1995 |
办公设备对于反映公众和办公人员形象的适用性标准分类 |
Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants |
| ASTM E 1934a-1999 |
用红外热成像法检验电气和机械设备的标准指南 |
Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography |
| ASTM F 1840a-1998 |
外科缝合针的标准术语 |
Standard Terminology for Surgical Suture Needles |
| ASTM F 1814a-1997 |
评价髋部和膝关节连接部件模数的标准指南 |
Standard Guide for Evaluating Modular Hip and Knee Joint Components |
| ASTM D 6276a-1999 |
用PH值估计土壤稳定要求的土壤石灰比例的标准试验方法 |
Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization |
| ASTM D 6384a-1999 |
润滑剂的生物降解性和生态毒性的相关标准术语 |
Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants |
| ASTM F 1001a-1999 |
防护服装材料评估用化学试剂的选择标准指南 |
Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials |
| ASTM D 149a-1997 |
固体电绝缘材料在商用电源频率下的介电击穿电压和介电强度的标准试验方法 |
Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies |
| ASTM F 780a-1993 |
高山滑雪板的直线变形和抗断裂强度的标准测试方法 |
Standard Test Method for Linear Deformation and Breaking Strength of Alpine Skis |
| ASTM D 3846-2002 |
增强塑料的平面剪切强度的标准测试方法 |
Standard Test Method for In-Plane Shear Strength of Reinforced Plastics |
| ASTM D 4673-2002 |
丙烯腈-丁二烯-苯乙烯(ABS)塑料及合金模压和挤压材料的标准分类系统 |
Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials |
| ASTM D 3335a-1985 |
原子吸收光谱法测定涂料中低浓度铅、镉和钴的标准试验方法 |
Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy |
| ASTM A 696a-1990 |
压力管道部件用特级热锻或冷精轧碳素钢棒标准规范 |
Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components |
| ASTM A 739a-1990 |
高温或加压部件或高温加压部件用热轧合金钢棒标准规范 |
Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both |
| ASTM E 9a-1989 |
室温下金属材料压缩试验的标准试验方法 |
Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature |
| ASTM D 1053a-1992 |
橡胶性能的标准试验方法.低温下固化:挠性聚合物和涂层织物 |
Standard Test Methods for Rubber Property-Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics |
| ASTM D 4086a-1992 |
位变异构性的外观鉴定的标准实施规程 |
Standard Practice for Visual Evaluation of Metamerism |
| ASTM A 600a-1992 |
高速工具钢的标准规范 |
Standard Specification for Tool Steel High Speed |
| ASTM F 1497a-1999 |
导管轴耐激光性能测定的标准试验方法 |
Standard Test Method for Determining Laser Resistance of the Shaft of Tracheal Tubes |
| ASTM F 626a-1996 |
栏栅配件标准规范 |
Standard Specification for Fence Fittings |
| ASTM D 3909b-1997 |
表面撒矿物粉的铺屋面的沥青卷材(玻璃毛毡)标准规范 |
Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules |
| ASTM D 4990a-1997 |
屋顶和防水用柏油玻璃油毡的标准规范 |
Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing |
| ASTM D 5764a-1997 |
木和木制品的榫支承强度评估用标准试验方法 |
Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products |
| ASTM D 6006a-1997 |
评定液压流体生物降解性的标准指南 |
Standard Guide for Assessing Biodegradability of Hydraulic Fluids |
| ASTM E 1351-2001 |
现场金相复制品的生产和评定标准实施规范 |
Standard Practice for Production and Evaluation of Field Metallographic Replicas |
| ASTM E 1318-2002 |
根据用户要求的公路承重监测器系统和测试方法标准规范 |
Standard Specification for Highway Weigh-in-Motion (WIM) Systems with User Requirements and Test Methods |
| ASTM D 6297-2001 |
桥梁沥青塞接头的标准规范 |
Standard Specification for Asphaltic Plug Joints for Bridges |
| ASTM D 5382-2002 |
粉末涂层光学特性评定标准指南 |
Standard Guide to Evaluation of Optical Properties of Powder Coatings |
| ASTM E 1130-2002 |
使用声音清晰度指数在敞开式办公室内对谈话保密性进行客观量度的标准试验方法 |
Standard Test Method for Objective Measurement of Speech Privacy in Open Offices Using Articulation Index |
| ASTM E 1664a-1995 |
办公设备对于布局和建筑物因素的适用性标准分类 |
Standard Classification for Serviceability of an Office Facility for Layout and Building Factors |
| ASTM E 1665a-1995 |
办公设备对于设备保护的适用性标准分类 |
Standard Classification for Serviceability of an Office Facility for Facility Protection |
| ASTM G 81a-1997 |
颚式破碎机刨削磨损试验的标准试验方法 |
Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| ASTM D 2949a-2001 |
外径尺寸3.25英寸聚氯乙烯塑料排水管、废水管和通风管及配件的标准规范 |
Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings |
| ASTM D 3930a-1993 |
造房用木质建筑材料用胶粘剂的标准规范 |
Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes |
| ASTM F 1766a-1997 |
冰凿自救技术的标准指南 |
Standard Guide for Ice Awls Self-Rescue Technique |
| ASTM E 1757-2001 |
化合物分析用生物物质制备的标准实施规范 |
Standard Practice for Preparation of Biomass for Compositional Analysis |
| ASTM E 1755-2001 |
生物物质中灰分的标准测试方法 |
Standard Test Method for Ash in Biomass |
| ASTM E 1690-2001 |
测定生物物质中乙醇萃取物的标准试验方法 |
Standard Test Method for Determination of Ethanol Extractives in Biomass |
| ASTM A 368a-1995 |
不锈钢丝绳的标准规范 |
Standard Specification for Stainless Steel Wire Strand |
| ASTM A 581/A 581Mb-1995 |
快削不锈钢丝和钢条标准规范 |
Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods |
| ASTM D 1113a-1990 |
洗净羊毛中植物性物质和其它碱性不溶杂质的标准测试方法 |
Standard Test Method for Vegetable Matter and Other Alkali-Insoluble Impurities in Scoured Wool |
| ASTM F 319a-1991 |
航空航天用透明加热元件中裂纹的偏振光检测标准实施规范 |
Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements |
| ASTM C 351b-1992 |
热绝缘材料的平均比热的标准试验方法 |
Standard Test Method for Mean Specific Heat of Thermal Insulation |
| ASTM E 1666a-1995 |
办公设备对于正常时间或条件以外的工作的适用性标准分类 |
Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions |
| ASTM E 1668a-1995 |
办公设备对于以舒适性吸引和留住职员的适用性标准分类 |
Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff |
| ASTM D 6635-2001 |
平板式膨胀计使用的标准试验方法 |
Standard Test Method for Performing the Flat Plate Dilatometer |
| ASTM B 920-2001 |
用次氯酸钠液的蒸气测定金属衬底上金和钯合金覆层孔隙度的标准实施规范 |
Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution |
| ASTM D 6722-2001 |
直接燃烧分析法测量煤和煤燃烧残余物中总汞量的标准试验方法 |
Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis |
| ASTM D 6735-2001 |
测量来自矿物煅烧排气源的气态氯化物和氟化物的标准试验方法.冲击滤尘法 |
Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources - Impinger Method |
| ASTM A 576b-1990 |
特级热锻碳素钢棒标准规范 |
Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality |
| ASTM F 1448a-1993 |
产品和文献的防假冒、改造、变更、重复、伪装和替换的保密技术的选择标准指南 |
Standard Guide for Selection of Security Technology for Protection Against Counterfeiting, Alteration, Diversion, Duplication, Simulation, and Substitution (CADDSS) of Products or Documents |
| ASTM B 781a-1993 |
银镉氧化接触材料标准指南 |
Standard Guide for Silver-Cadmium Oxide Contact Material |
| ASTM D 5665a-1999 |
冷用屋顶及防水用的热塑性织物的标准规范 |
Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing |
| ASTM C 1419a-1999 |
室温下耐火材料中的声速及声速在测量近似杨氏模量中的应用的标准试验方法 |
Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young's Modulus |
| ASTM D 4491a-1999 |
通过介电常数测试土工织物的水渗透性的标准试验方法 |
Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM A 571/A 571M-2001 |
适用于低温设备的承压零部件用奥氏体球墨铸铁铸件标准规范 |
Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service |
| ASTM D 5087-2002 |
测定含溶剂汽车涂层释放的和在挥发有机化合物控制装置中可除去的挥发有机化合物总量的标准试验方法 |
Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
| ASTM D 4305a-1998 |
低温下航空燃料过滤流的标准试验方法 |
Standard Test Method for Filter Flow of Aviation Fuels at Low Temperatures |
| ASTM E 2128a-2001 |
评定建筑物墙壁水渗漏的标准指南 |
Standard Guide for Evaluating Water Leakage of Building Walls |
| ASTM D 4469-2001 |
用沥青铺面混合料中的集料计算沥青吸收率的标准试验方法 |
Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in an Asphalt Pavement Mixture |
| ASTM D 5546-2001 |
离心法测定甲苯中沥青胶粘剂溶解度的标准试验方法 |
Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge |
| ASTM D 6162a-2000 |
使用聚合物和玻璃纤维增强材料结合的苯乙烯丁二烯苯乙烯(SBS)改良沥青层材料的标准规范 |
Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements |
| ASTM D 3931a-1993 |
测定裂缝强度的标准试验方法.用压力负荷法测定填充胶粘剂的剪切 粘结强度 |
Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading |
| ASTM D 4019a-1994 |
五氧化磷回收量热法测定塑料中水份的标准试验方法 |
Standard Test Method for Moisture in Plastics by Coulometric Regeneration of Phosphorus Pentoxide |
| ASTM F 1294a-1997 |
有关自动识别硬拷贝印刷系统的标准术语 |
Standard Terminology Relating to Automatic Identification Hard Copy Printing Systems |
| ASTM D 6733-2001 |
用50米毛细管高分辨率气相色谱法测定火花点火发动机燃料中各种成分的标准试验方法 |
Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography |
| ASTM F 1765a-1997 |
冰杖自救技术标准指南 |
Standard Guide for Ice Staff Self-Rescue Technique |
| ASTM E 808-2001 |
向后反射性描述标准实施规范 |
Standard Practice for Describing Retroreflection |
| ASTM E 1809-2001 |
用便携式反光镜测量高度可视反光工作服标志材料的试验方法 |
Test Method for Measurement of High-Visibility Retroreflective-Clothing Marking Material Using a Portable Retroreflectometer |
| ASTM G 74-2001 |
材料对气流冲击着火敏感度的标准测试方法 |
Standard Test Method for Ignition Sensitivity of Materials to Gaseous Fluid Impact |
| ASTM G 120-2001 |
索格利特萃取法测定可溶性残余杂质的标准试验方法 |
Standard Practice for Determination of Soluble Residual Contamination in by Soxhlet Extraction |
| ASTM D 841-2002 |
硝化级甲苯标准规范 |
Standard Specification for Nitration Grade Toluene |
| ASTM E 1756-2001 |
生物物质中总固体量的标准测试方法 |
Standard Test Method for Determination of Total Solids in Biomass |
| ASTM A 532/A 532Ma-1993 |
耐磨铸铁标准规范 |
Standard Specification for Abrasion-Resistant Cast Irons |
| ASTM C 1148a-1992 |
测量砖石建筑用灰浆干缩性标准试验方法 |
Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar |
| ASTM D 6721-2001 |
氧化水解微库仑分析法测定煤中氯含量的标准试验方法 |
Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry |
| ASTM E 2184-2002 |
保健用文献格式标准规范 |
Standard Specification for Healthcare Document Formats |
| ASTM E 2185-2001 |
独立的数字听写系统和工作站之间数字声音数据传送的标准规范 |
Standard Specification for Transferring Digital Voice Data Between Independent Digital Dictation Systems and Workstations |
| ASTM D 922a-2000 |
非硬质聚氯乙烯管系的标准规范 |
Standard Specification for Nonrigid Vinyl Chloride Polymer Tubing |
| ASTM G 86a-1998 |
在环境液态氧和加压液态或气态氧环境中测定材料对机械冲击着火敏感性的试验方法 |
Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments |
| ASTM G 109a-1999 |
混凝土暴露于氯化物环境时确定化学混合物对埋置钢筋腐蚀作用的标准试验方法 |
Standard Test Method for Determining the Effects of Chemical Admixtures on the Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments |
| ASTM D 6319a-2000 |
医用腈橡胶检验手套的标准规范 |
Standard Specification for Nitrile Examination Gloves for Medical Application |
| ASTM C 1393a-2000 |
管子和容器用垂直向矿物纤维薄板卷和薄板热绝缘的标准规范 |
Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks |
| ASTM F 2147-2001 |
豚鼠的标准规程:接触过敏素的分裂辅助剂和闭合回路试验 |
Standard Practice for Guinea Pig: Split Adjuvant and Closed Patch Testing for Contact Allergens |
| ASTM D 6683-2001 |
测量粉末和其他散装固体松密度的标准试验方法 |
Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids |
| ASTM C 1505-2001 |
三点负荷法测定陶瓷砖断裂强度的标准试验方法 |
Standard Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading |
| ASTM C 1510-2001 |
Abriged分光光度测量法测定卫生陶瓷颜色和色差的标准试验方法 |
Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry |
| ASTM D 6770-2002 |
织网耐磨性标准测试方法(六角棒法) |
Standard Test Method for Abrasion Resistance of Textile Webbing (Hex Bar Method) |
| ASTM F 1018a-1987 |
钢制应急齿轮货舱上锁箱标准规范 |
Standard Specification for Steel Emergency Gear Stowage Locker |
| ASTM F 1359a-1999 |
淋喷状态下人体模型上防护服装或套装耐液体渗透性的标准试验方法 |
Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Mannequin |
| ASTM B 343a-1992 |
镍电镀用镍制备的标准实施规范 |
Standard Practice for Preparation of Nickel for Electroplating with Nickel |
| ASTM E 1481a-2000 |
建筑物用护栏装置和围栏的标准术语 |
Standard Terminology of Railing Systems and Rails for Buildings |
| ASTM D 3795a-2000 |
用转矩流变仪测试可浇注的热固材料的热流性、固化性及性能特性的标准试验方法 |
Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer |
| ASTM D 4785a-2000 |
水中低含量碘-131的标准试验方法 |
Standard Test Method for Low-Level Iodine-131 in Water |
| ASTM D 6559a-2000 |
测定碳阳极和阴极块的热重(TGA)气体反应性的标准试验方法 |
Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks |
| ASTM C 471M-2001 |
石膏和石膏制品的化学分析标准试验方法(米制) |
Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products [Metric] |
| ASTM F 1604-2002 |
冰淇淋、软饮料、牛奶冰淇淋冷柜标准规范 |
Standard Specification for Freezers, Ice Cream, Soft Serve, Shake |
| ASTM E 1836-2001 |
设备管理用建筑物楼板面积测量的标准分类 |
Standard Classification for Building Floor Area Measurements for Facility Management |
| ASTM E 837-2001 |
用钻孔应变仪法测定残余应力的标准试验方法 |
Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method |
| ASTM D 6691-2001 |
利用规定的微生物团测定塑料材料在海洋环境中需氧生物降解能力的标准试验方法 |
Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium |
| ASTM D 6712-2001 |
超高分子量聚乙烯(UHMW-PE)实心塑料型材标准规范 |
Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes |
| ASTM D 6697-2001 |
水的化学需氧量(锰III需氧量)测定的标准试验方法 |
Standard Test Method for Determination for Chemical Oxygen Demand (Manganese III Oxygen Demand) of Water |
| ASTM D 5792-2002 |
与废物管理活动相关的环境数据形成的标准实施规程:数据质量对象的开发 |
Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives |
| ASTM D 6723-2002 |
直接拉伸(DT)试验中沥青粘合剂断裂特性测定的标准试验方法 |
Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT) |
| ASTM D 1691-2002 |
水中锌含量的标准试验方法 |
Standard Test Methods for Zinc in Water |
| ASTM D 3223-2002 |
水中总贡含量的标准试验方法 |
Standard Test Method for Total Mercury in Water |
| ASTM E 542-2001 |
试验室量器校准的标准规程 |
Standard Practice for Calibration of Laboratory Volumetric Apparatus |
| ASTM E 651/E 651M-2001 |
对已建成的建筑物进行系统分析和合格保证的机构的能力评价的标准实施规程 |
Standard Practice for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building |
| ASTM D 3590-2002 |
水中氮总数的基耶达尔标准试验方法 |
Standard Test Methods for Total Kjeldahl Nitrogen in Water |
| ASTM E 2154-2001 |
用带有固相微量萃取(SPME)的无源液上浓缩法对燃烧废墟样品中易燃液体残留物进行分离和浓缩的标准实施规程 |
Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Solid Phase Microextraction (SPME) |
| ASTM E 2018-2001 |
财产状况评定的标准指南:基本财产状况评定方法 |
Standard Guide for Property Condition Assessments: Baseline Property Condition Assessment Process |
| ASTM D 4113-2002 |
机织家具套织物的标准性能规范 |
Standard Performance Specification for Woven Slipcover Fabrics |
| ASTM D 4115-2002 |
妇女及女孩用针织和机织服装、手套织物的标准性能规范 |
Standard Performance Specification for Women's and Girls' Knitted and Woven Dress Glove Fabrics |
| ASTM D 5949-2001 |
石油产品倾点标准试验方法(自动调压脉冲法) |
Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) |
| ASTM D 6803-2002 |
利用小环境会议室对从油漆中释放出挥发性有机化合物(包括羰基化合物)的检测和抽样的标准实施规程 |
Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Paint Using Small Environmental Chambers |
| ASTM F 2188-2002 |
在薄膜开关或薄膜开关组合上检测可变频振动影响的标准试验方法 |
Standard Test Method for Determining the Effect of Variable Frequency Vibration on a Membrane Switch or Membrane Switch Assembly |
| ASTM D 5847-2002 |
书写水分析标准试验方法的质量控制规范的标准实施规范 |
Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
| ASTM C 1339-2002 |
抗化学腐蚀聚合物机械薄浆的可流动性和承重区的标准试验方法 |
Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts |
| ASTM E 1148-2002 |
水溶解度测量用标准试验方法 |
Standard Test Method for Measurements of Aqueous Solubility |
| ASTM D 2266-2001 |
润滑脂耐磨特性的标准试验方法(四球法) |
Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method) |
| ASTM E 2172-2001 |
利用线虫Caenorhabditis elegans进行实验室土壤毒性试验的标准指南 |
Standard Guide for Conducting Laboratory Soil Toxicity Tests with the Nematode Caenorhabditis elegans |
| ASTM D 801-2002 |
二聚戊烯抽样和测试的试验方法 |
Standard Test Methods for Sampling and Testing Dipentene |
| ASTM D 802-2002 |
松油抽样和测试的标准试验方法 |
Standard Test Methods for Sampling and Testing Pine Oils |
| ASTM E 1525-2002 |
设计沉淀物生物试验的标准指南 |
Standard Guide for Designing Biological Tests with Sediments |
| ASTM D 5634-2001 |
永久性和耐久性胶版及书籍纸选择的标准指南 |
Standard Guide for Selection of Permanent and Durable Offset and Book Papers |
| ASTM D 4950-2001 |
汽车保养润滑脂的标准分类和规范 |
Standard Classification and Specification of Automotive Service Greases |
| ASTM D 6728-2001 |
转盘电极原子发射光谱法测定气轮机和柴油发动机燃料中杂质的标准试验方法 |
Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry |
| ASTM D 6731-2001 |
封闭的呼吸器中润滑剂或润滑组分水中需氧生物降解能力测定的标准试验方法 |
Standard Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer |
| ASTM F 2155-2001 |
扣锁或密封用搭扣和其他固定装置性能的标准规范 |
Standard Specification for Performance of Hasps and Other Attachment Devices for Padlocks or Seals |
| ASTM F 355-2001 |
运动表面系统和材料减震性能的标准试验方法 |
Standard Test Method for Shock-Absorbing Properties of Playing Surface Systems and Materials |
| ASTM D 6702-2001 |
非洁净室使用的无纺布的动态擦除效果测定的标准试验方法 |
Standard Test Method for Determining the Dynamic Wiping Efficiency of Nonwoven Fabrics Not Used in Cleanrooms |
| ASTM F 1935-2001 |
测量背包式或登山用帐蓬高度的标准试验方法 |
Standard Test Method for Measuring the Headroom of a Backpacking or Mountaineering Tent |
| ASTM D 6734-2001 |
水中低水平大肠菌噬体的标准测试方法 |
Standard Test Method for Low Levels of Coliphages in Water |
| ASTM F 1601-2001 |
中央真空除尘系统用电动排气管的发动机寿命评估标准试验方法 |
Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems |
| ASTM F 1692-2001 |
家用中央真空除尘系统用涡轮动力排气管寿命评定的标准试验方法 |
Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems |
| ASTM E 2176-2001 |
连续浸润标准条件下路面标记反射亮度系数测量的标准试验方法 |
Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Continuous Wetting |
| ASTM C 1421b-2001 |
测定室温下高级陶瓷断裂韧性的标准试验方法 |
Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature |
| ASTM G 72-2001 |
在高压富氧环境中液体和固体自燃点的标准测试方法 |
Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment |
| ASTM F 884-2001 |
安装在内部的(集中式)真空吸尘器的电动机寿命评定的标准试验方法 |
Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner |
| ASTM D 3595-2002 |
聚三氟氯乙烯挤压塑料薄板及薄膜标准规范 |
Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film |
| ASTM D 4276-2002 |
有限通道面积的标准规程 |
Standard Practice for Confined Area Entry |
| ASTM D 3179-2002 |
煤和焦炭分析样品中氮的标准测试方法 |
Standard Test Methods for Nitrogen in the Analysis Sample of Coal and Coke |
| ASTM D 5383-2002 |
工艺美术工作者用目视确定工美材料光牢性的标准操作规程 |
Standard Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists |
| ASTM D 5394-2002 |
回收的1,1,1-三氯乙烷的标准规范 |
Standard Specification for Reclaimed 1,1,1-Trichloroethane |
| ASTM D 4934-2002 |
橡胶合成材料的标准试验方法:2-苯并噻唑基亚磺酰胺催化剂.不溶解性 |
Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators-Insolubles |
| ASTM D 1480-2002 |
用宾汉比重计测定粘性材料密度和相对密度(比重)的标准试验方法 |
Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer |
| ASTM D 6843-2002 |
橡胶组成(双-(三乙氧甲硅烷丙基)硫烷)中使用的硫烷的标准试验方法:气相色谱法表征 |
Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC) |
| ASTM D 2961-2002 |
(8号)2.36毫米顶筛煤中单级总湿度低于15%的标准试验方法 |
Standard Test Method for Single-Stage Total Moisture Less than 15% in Coal Reduced to 2.36-mm (No. 8 Sieve) Topsize |
| ASTM E 1325-2002 |
与实验装置设计相关的标准术语 |
Standard Terminology Relating to Design of Experiments |
| ASTM D 6844-2002 |
橡胶组分(双-(三乙氧甲硅烷丙基)硫烷)中使用的硅烷的标准试验方法:高效液相色谱法表征 |
Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC) |
| ASTM E 1207-2002 |
腋下除臭剂的感官评定的标准实施规程 |
Standard Practice for The Sensory Evaluation of Axillary Deodorancy |
| ASTM F 879Ma-2002 |
不锈钢圆头及扁平沉头六角螺钉的标准规范(米制) |
Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric] |
| ASTM F 879a-2002 |
不锈钢圆头及扁平沉头六角螺钉的标准规范 |
Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws |
| ASTM A 900/A 900M-2001 |
非晶磁性带材叠装系数的标准测试方法 |
Standard Test Method for Lamination Factor of Amorphous Magnetic Strip |
| ASTM E 1366-2002 |
标准化水生微观世界的标准规程 |
Standard Practice for Standardized Aquatic Microcosms: Fresh Water |
| ASTM D 4126-2002 |
蒸气脱脂级和普通溶剂级1,1,1-三氯乙烷的标准规范 |
Standard Specification for Vapor-Degreasing Grade and General Solvent Grade 1,1,1-Trichloroethane |
| ASTM D 4191-2003 |
原子吸收分光光度法对水中钠含量的标准试验方法 |
Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry |
| ASTM D 2148-2002 |
电绝缘用可粘结硅橡胶带的标准试验方法 |
Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation |
| ASTM E 2250-2002 |
水可混合的金属加工液中内毒素浓度测定的标准方法 |
Standard Method for Determination of Endotoxin Concentration in Water Miscible Metal Working Fluids |
| ASTM F 2293-2003 |
测定用喷墨打印机制作的图像耐沾污性的标准实施规范 |
Standard Practice for Determining the Stain Resistance of Images Produced by Ink Jet Printers |
| ASTM F 2294-2003 |
测定打印介质可写性的标准实施规范 |
Standard Practice for Determining the Writeability of Print Media |
| ASTM F 2302-2003 |
耐热防火防护服标示的标准性能规范 |
Standard Performance Specification for Labeling Protective Clothing as Heat and Flame Resistant |
| ASTM F 1521-2003 |
炉灶性能标准试验方法 |
Standard Test Methods for Performance of Range Tops |
| ASTM D 6628-2003 |
路面标记材料颜色的标准规范 |
Standard Specification for Color of Pavement Marking Materials |
| ASTM E 1245-2003 |
用自动图象分析法测定金属的夹杂物或次生相要素含量的标准操作规程 |
Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis |
| ASTM E 1247-2003 |
用分光光度法探测物体彩色样品的荧光粉的标准实施规程 |
Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry |
| ASTM E 1799-2002 |
光电微型组件目视检验的标准规程 |
Standard Practice for Visual Inspections of Photovoltaic Modules |
| ASTM D 3559-2003 |
水中铅含量的标准试验方法 |
Standard Test Methods for Lead in Water |
| ASTM D 3645-2003 |
水中铍含量的标准试验方法 |
Standard Test Methods for Beryllium in Water |
| ASTM D 3835-2002 |
用毛细管流变仪测定聚酯材料性能的标准试验方法 |
Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer |
| ASTM C 1207-2003 |
无源中子复合计数法测定废弃物中钚的无损检验的标准试验方法 |
Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting |
| ASTM D 5863a-2000 |
火焰原子吸收分光光度法测定原油和残余燃料中镍、钒、铁和钠含量的标准试验方法 |
Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry |
| ASTM D 5952-2002 |
军用住处的可中断调查和军用住处的检验水系统用标准指南 |
Standard Guide for Inspecting Water Systems for Legionellae and Investigating Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever) |
| ASTM E 1610-2002 |
侦察涂料分析和比较标准导则 |
Standard Guide for Forensic Paint Analysis and Comparison |
| ASTM D 1981-2002 |
脂肪酸加热色变测定的标准试验方法 |
Standard Test Method for Measuring Color After Heating of Tall Oil Fatty Acids |
| ASTM D 1993-2003 |
用多点布-埃-特氮气吸附法对沉积二氧化硅表面面积的标准测试方法 |
Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption |
| ASTM D 2116-2002 |
FEP氟化乙丙烯模制和压塑材料的标准规范 |
Standard Specification for FEP-Fluorocarbon Molding and Extrusion Materials |
| ASTM D 2136-2002 |
涂层织物的低温弯曲标准试验方法 |
Standard Test Method for Coated Fabrics-Low-Temperature Bend Test |
| ASTM D 3078-2002 |
起泡法测定软包装泄漏的标准试验方法 |
Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission |
| ASTM D 3170-2003 |
覆层耐切割的标准试验方法 |
Standard Test Method for Chipping Resistance of Coatings |
| ASTM D 3385-2003 |
用双环渗透仪现场测定土壤渗滤速度的标准试验方法 |
Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer |
| ASTM D 6919-2003 |
用离子色谱法测定水及废水中溶解的碱及碱土阳离子及铵的标准试验方法 |
Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography |
| ASTM C 1531-2003 |
圬工灰浆粘接剪切强度指数现场测量的标准试验方法 |
Standard Test Methods for In Situ Measurement Of Masonry Mortar Joint Shear Strength Index |
| ASTM F 2118-2003 |
聚丙烯骨用水泥材料力控疲劳试验的恒定幅值的试验方法 |
Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials |
| ASTM A 183-2003 |
碳素钢制轨条螺栓和螺母的标准规范 |
Standard Specification for Carbon Steel Track Bolts and Nuts |
| ASTM D 3261-2003 |
聚乙烯(PE)塑料管用端面热熔接聚乙烯塑料配件标准规范 |
Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing |
| ASTM D 3263-2003 |
除去水沉积物用的溶剂系腐蚀性的标准试验方法 |
Standard Test Methods for Corrosivity of Solvent Systems for Removing Water-Formed Deposits |
| ASTM A 871/A 871M-2003 |
耐大气腐蚀的高强度低合金结构钢板标准规范 |
Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance |
| ASTM D 4457-2002 |
直接注入气相色谱仪法测定涂料及涂层中二氯甲烷和1,1,1-三氯乙烷的标准试验方法 |
Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph |
| ASTM E 1609-2001 |
污染防止计划的制订和实施标准指南 |
Standard Guide for Development and Implementation of a Pollution Prevention Program |
| ASTM E 746-2002 |
工业用X射线照相胶片的相关图像质量特性曲线测定的标准试验方法 |
Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film |
| ASTM E 1295-2001 |
用网纹水蚤(Dubia)进行三卵、复原毒性试验的标准指南 |
Standard Guide for Conducting Three-Brood, Renewal Toxicity Tests with Ceriodaphnia dubia |
| ASTM C 919-2002 |
声学设备中密封料使用的标准实施规范 |
Standard Practice for Use of Sealants in Acoustical Applications |
| ASTM F 1854-2001 |
医用植入物上多孔覆层的立体测量评价的标准试验方法 |
Standard Test Method for Stereological Evaluation of Porous Coatings on Medical Implants |
| ASTM D 566-2002 |
润滑脂滴点的标准试验方法 |
Standard Test Method for Dropping Point of Lubricating Grease |
| ASTM F 1014-2002 |
船舶用闪光灯的规范 |
Standard Specification for Flashlights on Vessels |
| ASTM F 1334-2002 |
测定真空吸尘器A-加重声音功率级的标准试验方法 |
Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners |
| ASTM F 1597-2002 |
薄膜开关驱动力和接触力测定标准试验方法 |
Standard Test Method for Determining the Actuation Force and Contact Force of a Membrane Switch |
| ASTM D 6785-2002 |
用火焰或石墨炉原子吸收光谱法测定工作场所空气中铅含量的标准试验方法 |
Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry |
| ASTM E 925-2002 |
光谱狭缝宽度不超过2nm的紫外线-可见光分光光度计的校准监测的标准实施规程 |
Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm |
| ASTM F 1087-2002 |
衬垫受潮后线性尺寸稳定性的标准试验方法 |
Standard Test Method for Linear Dimensional Stability of a Gasket Material to Moisture |
| ASTM D 1074-2002 |
沥青混合料抗压强度的标准测试方法 |
Standard Test Method for Compressive Strength of Bituminous Mixtures |
| ASTM D 6760-2002 |
用超声波孔间试验测试混凝土深地基完整性的标准试验方法 |
Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing |
| ASTM D 5950-2002 |
石油产品倾点的标准测试方法(自动倾斜法) |
Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method) |
| ASTM D 5580-2002 |
气相色谱法测定精炼汽油中苯、甲苯、苯乙烯、对/间-二甲苯、邻二甲苯、C9、重芳烃和全部芳烃的标准试验方法 |
Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography |
| ASTM D 6714-2001 |
灰化湿铬鞣革中氧化铬的标准测试方法(高氯酸氧化作用) |
Standard Test Method for Chromic Oxide in Ashed Wet Blue (Perchloric Acid Oxidation) |
| ASTM B 919-2001 |
内部增强的焊接铜热交换器管标准规范 |
Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement |
| ASTM E 2169-2001 |
可混合水的金属加工液中使用的抗菌杀虫剂选择的标准实施规范 |
Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
| ASTM F 2150-2001 |
组织工程医疗产品中使用的生物材料支架的表征和试验标准指南 |
Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products |
| ASTM C 1515-2001 |
新的或已有的外部规格石料垂直和水平表面清洁的标准指南 |
Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing |
| ASTM F 1003-2002 |
摩托救生艇探照灯标准规范 |
Standard Specification for Searchlights on Motor Lifeboats |
| ASTM D 13-2002 |
松脂油的标准规范 |
Standard Specification for Spirits of Turpentine |
| ASTM D 233-2002 |
松脂的抽样和测试的标准试验方法 |
Standard Test Methods of Sampling and Testing Turpentine |
| ASTM E 178-2002 |
进行远距离观测的标准实时规程 |
Standard Practice for Dealing With Outlying Observations |
| ASTM D 5466-2001 |
测定大气中挥发性有机化学物质的标准试验方法(罐装抽样法) |
Standard Test Method for Determination of Volatile Organic Chemicals in Atmospheres (Canister Sampling Methodology) |
| ASTM D 4255/D 4255M-2001 |
轨道剪切法测定聚合母体组合材料平面剪切特性的标准试验方法 |
Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method |
| ASTM D 6800-2002 |
用微量金属的ICPMS分析法使用快速还原浓缩技术对水样品制备的标准实施规程 |
Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals |
| ASTM D 5258-2002 |
使用封闭式微波炉加热法从沉淀物中酸萃取元素的标准实施规程 |
Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating |
| ASTM D 6784-2002 |
由燃煤固定源产生的废气中基本氧化颗粒粘合和总汞的标准试验方法(Ontario Hydro 法) |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) |
| ASTM E 1758-2001 |
用高效液相色谱法测定生物物质中碳水化合物的标准试验方法 |
Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography |
| ASTM E 1721-2001 |
生物物质中不溶酸残留物测定用标准试验方法 |
Standard Test Method for Determination of Acid-Insoluble Residue in Biomass |
| ASTM E 1821-2001 |
用气相色谱法测定生物物质中的碳水化合物的标准试验方法 |
Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography |
| ASTM F 1839-2001 |
作为测试矫形装置和仪器的标准物质的硬质聚氨酯泡沫的标准规范 |
Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments |
| ASTM F 2111a-2001 |
测量由于飞行器化学处理引起的对金属的粒间冲击或端面晶粒点蚀的标准实施规范 |
Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes |
| ASTM E 2147-2001 |
保健信息系统中使用的审核与揭示记录的标准规范 |
Standard Specification for Audit and Disclosure Logs for Use in Health Information Systems |
| ASTM D 229-2001 |
电绝缘用硬质薄板及板材的标准试验方法 |
Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation |
| ASTM D 4451-2002 |
低温灰化法测定涂料中颜料含量的标准试验方法 |
Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing |
| ASTM C 1521a-2002 |
评价已安装上的防风雨的密封接头粘结性的标准实施规程 |
Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints |
| ASTM D 6710-2002 |
评价烃基淬火油的标准指南 |
Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil |
| ASTM D 345-2002 |
道路和结构设备用取样和测试氯化钙标准试验方法 |
Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications |
| ASTM D 4193-2002 |
水中硫氰酸盐含量的标准试验方法 |
Standard Test Method for Thiocyanate in Water |
| ASTM E 2203-2002 |
压缩密封件、垫圈、镶嵌夹具、间隔物和附件的致密热塑性弹性体的标准规范 |
Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories |
| ASTM E 2200-2002 |
多孔生物控制有机体封装的信息的标准规范 |
Standard Specification for Information Included with Packaging of Multi-Cellular Biological Control Organisms |
| ASTM E 2199-2002 |
粉虱丽蚜小蜂Gahan的标准规范(膜翅目:日光蜂科) |
Standard Specification for Encarsia formosa Gahan (Hymenoptera:Aphelinidae) |
| ASTM C 97-2002 |
规格石料的吸收性和堆积比重的测试 |
Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone |
| ASTM C 967a-2002 |
铀矿浓缩物的标准规范 |
Standard Specification for Uranium Ore Concentrate |
| ASTM C 1517-2002 |
用直流电弧发射光谱分析法测定铀金属或化合物中金属杂质的标准试验方法 |
Standard Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy |
| ASTM C 1500-2002 |
用无源中子重复计数法对钚进行无损分析的标准试验方法 |
Standard Test Method for Nondestructive Assay of Plutonium by Passive Neutron Multiplicity Counting |
| ASTM D 6788-2002 |
可贮藏的压敏旗状书签的标准规范 |
Standard Specification for Repositionable Pressure-Sensitive Flags |
| ASTM C 1514-2002 |
用浓度计原理测量235U馏分的标准试验方法 |
Standard Test Method for Measurement of 235U Fraction using the Enrichment Meter Principle |
| ASTM D 6802-2002 |
用光谱法测定矿质绝缘油中可溶解的衰减产品相对含量的试验方法 |
Test Method for Determination of the Relative Content Of Dissolved Decay Products in Mineral Insulating Oils by Spectrophotometry |
| ASTM D 6804-2002 |
波纹箱把手设计的标准指南 |
Standard Guide for Hand Hole Design in Corrugated Boxes |
| ASTM E 2220-2002 |
可移动和耐久性财产的库存过程中识别的损失或过剩总数的全面评价的建立的标准实施规程 |
Standard Practice for Establishing the Full Valuation of the Loss/Overage Population Identified During the Inventory of Moveable, Durable Property |
| ASTM E 2221-2002 |
财产管理控制的标准实施规程 |
Standard Practice for Administrative Control of Property |
| ASTM E 2222-2002 |
颜色测量用带有分光计的主机通信的标准实施规程 |
Standard Practice for Host Computer Communication with Spectrometers for Color Measurements |
| ASTM E 2223-2002 |
用斜束超声法检验无缝、充气钢制的压力容器的标准实施规程 |
Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics |
| ASTM A 1024/A 1024M-2002 |
无缝平头黑色钢管线标准规范 |
Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless |
| ASTM D 6758-2002 |
用电动机械法测量土壤和土壤集料实体的硬挺度和表观模数的标准试验方法 |
Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by an Electro-Mechanical Method |
| ASTM F 1777-2002 |
漆球现场操作的标准实时规程 |
Standard Practice for Paintball Field Operation |
| ASTM D 3690-2002 |
涂乙烯及涂氨基甲酸乙酯的室内装饰织物的标准性能规范 |
Standard Performance Specification for Vinyl-Coated and Urethane-Coated Upholstery Fabrics-Indoor |
| ASTM D 3691-2002 |
机织带状针织家用窗帘和带皱折编织物的标准性能规范 |
Standard Performance Specification for Woven, Lace, and Knit Household Curtain and Drapery Fabrics |
| ASTM D 4048-2002 |
检测润滑油脂对铜的腐蚀的标准试验方法 |
Standard Test Method for Detection of Copper Corrosion from Lubricating Grease |
