| 标准号 |
中文名 |
英文名 |
| ASTM F 442/F 442M-1999 |
氯化聚氯乙烯(CPVC)塑料管(SDR-PR)标准规范 |
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR) |
| ASTM D 1974-1998 |
纤维板箱封口、密封及加固方法的标准实施规范 |
Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
| ASTM D 1972-1997 |
塑料产品的类别标记的标准实施规程 |
Standard Practice for Generic Marking of Plastic Products |
| ASTM D 1747-1999 |
粘性材料折射指数的测试方法 |
Standard Test Method for Refractive Index of Viscous Materials |
| ASTM E 768-1999 |
钢的自动杂质评定用试样的制备和评价标准指南 |
Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel |
| ASTM D 5973-1997 |
用于膨胀节密封的带钢封闭边缘围栏的弹性带密封件的标准规范 |
Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing |
| ASTM F 1910-1998 |
长的有倒刺带状障碍物的标准规范 |
Standard Specification for Long Barbed Tape Obstacles |
| ASTM A 978/A 978M-1997 |
预涂覆和聚乙烯复合肋式钢管标准规范 |
Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications |
| ASTM F 1964-1999 |
压力油炸器和锅状油炸器性能的标准试验方法 |
Standard Test Method for Performance of Pressure and Kettle Fryers |
| ASTM D 4400-1999 |
多切口涂板器测试涂料抗下垂性的标准试验方法 |
Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator |
| ASTM D 890-1998 |
液体松脂中水含量的试验方法 |
Test Method for Water in Liquid Naval Stores |
| ASTM D 6294-1998 |
用于屋顶和防水屋顶的铁金属紧固件组件的耐腐蚀性的标准试验方法 |
Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing |
| ASTM D 6293-1998 |
用气相色谱对低烯烃火花点火引擎燃料芳香碳氢化合物类型,环烃,烯烃,石蜡和氧化物的标准试验方法 |
Standard Test Method for Oxygenates and Paraffin, Olefin, Naphthene, Aromatic (O-PONA) Hydrocarbon Types in Low-Olefin Spark Ignition Engine Fuels by Gas Chromatography |
| ASTM D 871-1996 |
测试乙酸纤维素的试验方法 |
Test Methods of Testing Cellulose Acetate |
| ASTM D 985-1997 |
纸浆、纸和纸板亮度的标准试验方法(457nm上的定向反射) |
Standard Test Method for Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 nm) |
| ASTM D 984-1997 |
纸中可还原硫的试验方法 |
Standard Test Methods for Reducible Sulfur in Paper |
| ASTM D 5573-1999 |
纤维增强塑料(FRP)接合中失效方式分类的标准操作规程 |
Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints |
| ASTM B 571-1997 |
金属覆层粘附性定性试验的标准实施规程 |
Standard Practice for Qualitative Adhesion Testing of Metallic Coatings |
| ASTM D 3633-1998 |
薄膜铺面系统电阻率的测试方法 |
Test Method for Electrical Resistivity of Membrane-Pavement Systems |
| ASTM D 3632-1998 |
用氧压法加速粘结接头老化的试验方法 |
Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method |
| ASTM B 844-1998 |
银锡氧化接触材料的标准指南 |
Standard Guide for Silver-Tin Oxide Contact Material |
| ASTM F 1782-1997 |
帘布轮胎带状结构上油墨沉积量的标准操作规程 |
Standard Practice for Amount of Ink Deposit on Fabric Type Ribbons |
| ASTM D 6185-1997 |
评价润滑脂的二元混合物相容性的标准规程 |
Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases |
| ASTM D 1781-1998 |
胶粘剂攀缘卷筒剥离的试验方法 |
Test Method for Climbing Drum Peel for Adhesives |
| ASTM E 1620-1997 |
有关液体微粒及雾化的标准术语 |
Standard Terminology Relating to Liquid Particles and Atomization |
| ASTM E 1617-1997 |
报告粒度特性数据的标准规程 |
Standard Practice for Reporting Particle Size Characterization Data |
| ASTM E 1608-1998 |
用于辐射加工的X射线(韧致辐射)设备中剂量测定的标准规程 |
Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing |
| ASTM E 2043-1999 |
热重分析法测量农业辅助剂溶液中不挥发物质的标准试验方法 |
Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry |
| ASTM B 850-1998 |
对钢镀层后处理以减小氢脆变危险的标准指南 |
Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement |
| ASTM D 5668-1999 |
合成原料橡胶挥发性物质的标准试验方法 |
Standard Test Methods for Rubber From Synthetic Sources-Volatile Matter |
| ASTM E 426-1998 |
无缝焊接管形产品、奥氏体不锈钢的类似合金的电磁(涡电流)检验 |
Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Austenitic Stainless Steel and Similar Alloys |
| ASTM E 410-1998 |
液氯中水和残渣的试验方法 |
Standard Test Method for Moisture and Residue in Liquid Chlorine |
| ASTM C 1220-1998 |
放射性废物处置用整体废物形式静态浸出试验方法 |
Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste |
| ASTM C 1218/C 1218M-1999 |
砂浆和混凝土中水溶氯化物的试验方法 |
Test Method for Water-Soluble Chloride in Mortar and Concrete |
| ASTM F 1848-1998 |
搜寻和援救狗群/队的标准分类 |
Standard Classification for Search and Rescue Dog Crew/Teams |
| ASTM F 1851-1998 |
条码验证标准操作规程 |
Standard Practice for Bar Code Verification |
| ASTM E 1065-1999 |
评估超声波探测装置特性的标准指南 |
Standard Guide for Evaluating Characteristics of Ultrasonic Search Units |
| ASTM D 3139-1998 |
使用挠性弹性密封件的塑料压力管用连接件标准规范 |
Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals |
| ASTM D 5824-1998 |
纤维板暴露在热和水条件下粘结强度测定的标准试验方法 |
Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
| ASTM B 845-1997 |
电触点的混流气体试验用标准导则 |
Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts |
| ASTM C 663-1998 |
石棉水泥排雨水管道标准规范 |
Standard Specification for Asbestos-Cement Storm Drain Pipe |
| ASTM C 658-1998 |
砖或瓦管用耐化学腐蚀树脂薄浆标准规范 |
Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile |
| ASTM C 748-1998 |
石墨材料洛氏硬度的标准试验方法 |
Standard Test Method for Rockwell Hardness of Graphite Materials |
| ASTM C 740-1997 |
低温作业中真空反射隔热标准实施规程 |
Standard Practice for Evacuated Reflective Insulation In Cryogenic Service |
| ASTM D 545-1999 |
混凝土结构用预制膨胀接缝填料的试验方法(非挤压和弹性型) |
Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types) |
| ASTM D 528-1997 |
纸和纸板机器定向的标准试验方法 |
Standard Test Method for Machine Direction of Paper and Paperboard |
| ASTM G 162-1999 |
进行和评价实验室土壤腐蚀试验的标准操作规程 |
Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils |
| ASTM C 545-1997 |
锆石耐火材料的标准分类 |
Standard Classification of Zircon Refractories |
| ASTM C 484-1999 |
釉面瓷砖抗热冲击能力的标准试验方法 |
Standard Test Method for Thermal Shock Resistance of Glazed Ceramic Tile |
| ASTM D 633-1997 |
路用柏油的体积修正表 |
Volume Correction Table for Road Tar |
| ASTM D 589-1997 |
纸不透明度的标准试验方法(15℃漫射光照明A,89%反射背衬和纸制背衬) |
Standard Test Method for Opacity of Paper (15°Diffuse Illuminant A, 89% Reflectance Backing and Paper Backing) |
| ASTM C 500-1998 |
石棉水泥管的标准试验方法 |
Standard Test Methods for Asbestos-Cement Pipe |
| ASTM C 799-1999 |
核纯级硝酸铀酰溶液的化学的、质谱的、光谱化学的、核(放射性)及放射化学分析的标准试验方法 |
Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions |
| ASTM E 186-1998 |
厚壁(2至4 1/2英寸)(51至114mm)钢铸件标准基准射线摄影 |
Standard Reference Radiographs for Heavy-Walled (2 to 4 /; in. [51 to 114-mm]) Steel Castings |
| ASTM E 181-1998 |
放射性核素探测器的校准和分析的标准试验方法 |
Standard Test Methods for Detector Calibration and Analysis of Radionuclides |
| ASTM E 357-1998 |
用过氧化钠弹燃烧法测定有机化合物中磷的试验方法 |
Standard Test Method for Phosphorus in Organic Compounds by Sodium Peroxide Bomb Ignition |
| ASTM C 494-1999 |
混凝土用化学添加剂 |
Chemical Admixtures for Concrete |
| ASTM E 280-1998 |
厚壁(4 1/2至12英寸)(114至305mm)钢铸件标准基准射线摄影 |
Standard Reference Radiographs for Heavy-Walled (4 /; to 12-in. [114 to 305-mm]) Steel Castings |
| ASTM E 446-1998 |
钢铸件厚度在2 in(51mm)及以下用基准射线摄影 |
Standard Reference Radiographs for Steel Castings Up to 2 in. [51 mm] in Thickness |
| ASTM E 2044-1999 |
液态农业喷洒混合物散布的标准试验方法 |
Standard Test Method for Spreading of Liquid Agricultural Spray Mixtures |
| ASTM D 704-1999 |
三聚氰胺甲醛模制化合物的标准规范 |
Standard Specification for Melamine-Formaldehyde Molding Compounds |
| ASTM F 1135-1999 |
紧固件用铬酸镉或锌有机防蚀镀层标准规范 |
Standard Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners |
| ASTM F 1023-1999 |
粉化冰冻茶调合器 |
Standard Specification for Dispensers, Powdered Iced Tea |
| ASTM E 1603-1999 |
用罩式质谱探漏仪或残余气体分析仪作检漏测量的标准试验方法 |
Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode |
| ASTM D 778-1997 |
纸萃取物中氢离子浓度(pH)的标准试验方法(热萃取和冷萃取法) |
Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot- Extraction and Cold-Extraction Procedures) |
| ASTM D 777-1997 |
经过处理的纸和纸板易燃性的标准试验方法 |
Standard Test Methods for Flammability of Treated Paper and Paperboard |
| ASTM D 774/D 774M-1997 |
纸张抗破碎强度的标准试验方法 |
Standard Test Method for Bursting Strength of Paper |
| ASTM D 1636-1999 |
烯丙基模制化合物的标准规范 |
Standard Specification for Allyl Molding Compounds |
| ASTM C 769-1998 |
为获得近似杨氏模量测量加工的炭精及石墨材料中音速的标准试验方法 |
Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Young's Modulus |
| ASTM C 767-1993 |
炭精耐火材料导热率的标准试验方法 |
Standard Test Method for Thermal Conductivity of Carbon Refractories |
| ASTM D 6491-1999 |
干热试验中预应力预涂金属抗老化性评定的标准实施规程 |
Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test |
| ASTM D 6470-1999 |
原油中盐的标准测试方法(电位滴定位) |
Standard Test Method for Salt in Crude Oils (Potentiometric Method) |
| ASTM C 566-1997 |
用干燥法测定集料总含水量的标准试验方法 |
Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying |
| ASTM C 467-1997 |
富铝红柱石耐火材料的标准分类 |
Standard Classification of Mullite Refractories |
| ASTM C 458-1998 |
石棉水泥制品中有机纤维含量的标准试验方法 |
Standard Test Method for Organic Fiber Content of Asbestos-Cement Products |
| ASTM D 6213-1997 |
液体地理坐标耐化学药品评价的标准操作规程 |
Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids |
| ASTM E 1951-1998 |
校准标度线和轻型显微镜放大的标准指南 |
Standard Guide for Calibrating Reticles and Light Microscope Magnifications |
| ASTM D 6313-1999 |
通过氢热解和硫特殊差别光度学对芳香化合物中总硫的试验方法 |
Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Sulfur Specific Difference Photometry |
| ASTM D 6302-1998 |
离子交换树脂动力行为评价的标准操作规程 |
Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins |
| ASTM D 2285-1999 |
滴重法测定石油制电绝缘油耐水界面张力的试验方法 |
Test Method for Interfacial Tension of Electrical Insulating Oils of Petroleum Origin Against Water by the Drop-Weight Method |
| ASTM D 2258-1999 |
试验用纱线抽样的标准实施规程 |
Standard Practice for Sampling Yarn for Testing |
| ASTM D 2257-1998 |
纺织材料中可萃取物的试验方法 |
Test Method for Extractable Matter in Textiles |
| ASTM D 5642-1999 |
密封管道化学兼容性试验的标准试验方法 |
Standard Test Method for Sealed Tube Chemical Compatibility Test |
| ASTM D 6270-1998 |
土木工程应用中废弃轮胎使用的标准操作规程 |
Standard Practice for Use of Scrap Tires in Civil Engineering Applications |
| ASTM D 6190-1997 |
通过土壤埋葬的试验室模仿对管道涂层的阴极非结合的标准试验方法 |
Standard Test Method for Cathodic Disbonding of Pipeline Coatings by Laboratory Simulation of Soil Burial |
| ASTM D 3810-1997 |
IA型防止儿童开启的关闭器的最小应用力矩的试验方法 |
Test Method for Minimum Application Torque of Type IA Child-Resistant Closures |
| ASTM D 3807-1998 |
用拉力负荷法测定裂缝/撕裂中胶粘剂抗拉特性的测试方法(工程塑料之间) |
Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics- to-Engineering Plastics) |
| ASTM D 3968-1997 |
IIIA型防儿童开启的关闭器的旋转力矩的试验方法 |
Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures |
| ASTM D 3756-1997 |
使用分散电场法对固体介电材料抗树枝状电击穿性的试验方法 |
Standard Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields |
| ASTM D 3755-1997 |
在直流电压作用下固体电绝缘材料的介电击穿电压及介电强度的标准试验方法 |
Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress |
| ASTM D 3752-1998 |
水泥体中石棉强度的标准试验方法 |
Standard Test Method for Strength Imparted by Asbestos to a Cementitious Matrix |
| ASTM C 617-1998 |
压顶圆柱型混凝土试样标准实施规程 |
Standard Practice for Capping Cylindrical Concrete Specimens |
| ASTM D 5663-1997 |
包装纸和纸板回收成分确认的标准导则 |
Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard |
| ASTM C 1254-1999 |
用X射线荧光法测定无机酸中铀的标准试验法 |
Standard Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence |
| ASTM D 2728-1998 |
道路柏油的铺砌和使用温度的标准操作规程 |
Standard Practice for Paving Uses and Application Temperatures for Road Tars |
| ASTM C 472-1999 |
石膏、石膏灰泥和石膏混凝土的标准物理试验方法 |
Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete |
| ASTM C 342-1997 |
水泥集料混合物的潜在体积变化的标准试验方法 |
Standard Test Method for Potential Volume Change of Cement-Aggregate Combinations |
| ASTM E 2028-1999 |
卷入或可能卷入诉讼中的金属、矿或与金属有关的样品调查结果的接收、检验和报导的标准操作规程 |
Standard Practice for Receiving, Testing and Reporting Results of Investigation of Metal, Ore, or Metal Related Samples that Are or May Be Involved in Litigation |
| ASTM C 135-1996 |
用水浸法测定耐火材料的准确比重的标准试验方法 |
Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion |
| ASTM D 6456-1999 |
由聚酰亚胺树脂生产的精致部件的标准规范 |
Standard Specification for Finished Parts Made from Polyimide Resin |
| ASTM D 3860-1998 |
用液相等温线技术测定活性炭吸水率的标准实施规范 |
Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique |
| ASTM A 737/A 737M-1999 |
高强度低合金钢压力容器板的标准规范 |
Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel |
| ASTM E 911-1998 |
有聚四氟乙烯(PTFE)插头的玻璃管旋塞阀标准规范 |
Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs |
| ASTM E 908-1998 |
气体基准泄漏量校准标准规程 |
Standard Practice for Calibrating Gaseous Reference Leaks |
| ASTM D 6188-1997 |
通过铜氨落球对纤维素黏度的标准试验方法 |
Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall |
| ASTM D 3882-1999 |
机织和针织织物中弓纬和纬斜的试验方法 |
Test Method for Bow and Skewness in Woven and Knitted Fabrics |
| ASTM D 6242-1998 |
非织造织物的单位面积质量的标准试验方法 |
Standard Test Method for Mass Unit Area of Nonwoven Fabrics |
| ASTM D 3806-1998 |
小规模评价阻燃涂料的标准试验方法(2英尺通道法) |
Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method) |
| ASTM D 6090-1999 |
软化点树脂标准试验方法(杯球法) |
Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method) |
| ASTM D 6217-1998 |
试验室过滤法测试中间馏出燃料中颗粒杂质的标准试验方法 |
Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration |
| ASTM F 1837M-1997 |
热缩电缆引入密封的标准规范(公制) |
Standard Specification for Heat-Shrink Cable Entry Seals (Metric) |
| ASTM F 1834-1998 |
作为陆上减少化学污染物方法的厌氧生物治疗状况的标准指南 |
Standard Guide for Consideration of Anaerobic Bioremediation as a Chemical Pollutant Mitigation Method on Land |
| ASTM D 2383-1997 |
在潮湿条件下聚氯乙烯(PVC)化合物中增塑剂兼容性的试验 |
Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions |
| ASTM F 1841-1997 |
连续流动血泵里溶血评定的标准操作规程 |
Standard Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps |
| ASTM F 1798-1997 |
脊椎关节固定术植入用互连接装置和子配件的静态和疲劳特性评价的标准指南 |
Standard Guide for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants |
| ASTM D 25-1999 |
圆木桩的标准规范 |
Standard Specification for Round Timber Piles |
| ASTM D 1601-1999 |
乙烯聚合物稀溶液粘度的标准试验方法 |
Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers |
| ASTM A 395/A 395M-1999 |
高温用铁素体可锻铁保压铸件的标准规范 |
Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ASTM A 741-1998 |
高速公路护栏用镀锌钢丝绳和配件的标准规范 |
Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail |
| ASTM A 740-1998 |
钢丝网(编织或焊接电镀钢丝网)的标准规范 |
Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) |
| ASTM A 542/A 542M-1999 |
压力容器用经回火和淬火的铬钼、铬钼钒及铬钼钒钛硼合金钢板的标准规范 |
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium |
| ASTM D 1304-1999 |
与电绝缘试验相关的胶粘剂 |
Adhesives Relative to Their Use as Electrical Insulation Testing |
| ASTM E 2033-1999 |
计算机辐射(光刺激照明法)标准操作规程 |
Standard Practice for Computed Radiology (Photostimulable Luminescence Method) |
| ASTM F 1956-1999 |
对救援卡宾枪手的标准规范 |
Standard Specification for Rescue Carabiners |
| ASTM A 749/A 749M-1997 |
热轧高强度碳素低合金钢带材的标准规范 |
Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for |
| ASTM B 684-1997 |
铂铱电触点材料标准规范 |
Standard Specification for Platinum-Iridium Electrical Contact Materials |
| ASTM D 6126-1997 |
HFC-23(三氟甲烷)的标准规范 |
Standard Specification for HFC-23 (Trifluoromethane, CHF3) |
| ASTM D 6169-1998 |
环境调查用钻探取样用具的土壤和岩石取样装置选择的标准指南 |
Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations |
| ASTM C 141-1997 |
建筑结构用水硬性熟石灰标准规范 |
Standard Specification for Hydraulic Hydrated Lime for Structural Purposes |
| ASTM D 3951-1998 |
商业用包装 |
Commercial Packaging |
| ASTM D 6171-1997 |
地下水模型规程文件化的标准指南 |
Standard Guide for Documenting a Ground-Water Modeling Code |
| ASTM D 6167-1997 |
地球物理测井管道钻孔的标准指南:机械卡钳 |
Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper |
| ASTM D 6129-1997 |
通过原子吸收光谱术对发动机冷却剂浓缩物中硅的标准试验方法 |
Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy |
| ASTM D 6296-1998 |
用多维气相色谱法测定火花点火发动机燃料中烯烃总含量的标准试验方法 |
Standard Test Method for Total Olefins in Spark-Ignition Engine Fuels by Multi-dimensional Gas Chromatography |
| ASTM F 1801-1997 |
金属植入物腐蚀疲劳试验的标准操作规程 |
Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials |
| ASTM E 1986-1998 |
健康信息的信息访问特权的标准指南 |
Standard Guide for Information Access Privileges to Health Information |
| ASTM D 2413-1999 |
用液体介质浸渍的绝缘纸和纸板的制备与电试验的试验方法 |
Standard Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric |
| ASTM D 6173-1997 |
用电位滴定法对各种阴离子表面活性剂活性的标准试验方法 |
Standard Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration |
| ASTM D 6172-1998 |
用断面或用由摄影测量学过程直接操作者应用产生的交叉部分测定散装材料容积的标准试验方法 |
Standard Test Method for Determining the Volume of Bulk Materials Using Contours or Cross Sections Created by Direct Operator Compilation Using Photogrammetric Procedures |
| ASTM F 1863-1998 |
测量夜视镜透明部件的加权过滤系数的标准试验方法 |
Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmisivity of Transparent Parts |
| ASTM F 1893-1998 |
测量半导体器件电离剂量率熔蚀的指南 |
Guide for Measurement of Ionizing Dose-Rate Burnout of Semiconductor Devices |
| ASTM D 2557-1998 |
温度为-267.8至-55℃(-450至-67°F)范围内用拉力负荷法测定胶粘剂剪切强度的试验方法 |
Test Method for Strength Properties of Adhesives in Shear by Tension Loading in the Temperature Range from -267.8 to -55 Degrees C (-450 to -67 Degrees F) |
| ASTM F 1836M-1997 |
填料管、尼龙和包装配件的标准规范 |
Standard Specification for Stuffing Tubes, Nylon, and Packing Assemblies (Metric) |
| ASTM D 2319-1998 |
硬沥青软化点的标准试验方法(空气中立方块试验法) |
Standard Test Method for Softening Point of Pitch (Cube-in-Air Method) |
| ASTM F 1835-1997 |
电缆编接装置的标准指南 |
Standard Guide for Cable Splicing Installations |
| ASTM E 1120-1997 |
液氯 |
Standard Specification for Liquid Chlorine |
| ASTM D 5602-1998 |
屋面薄膜试样耐静态穿孔性能的标准试验方法 |
Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens |
| ASTM D 5586-1995 |
55岁以上妇女人体测量的标准表(全部号型) |
Standard Tables of Body Measurements for Women Aged 55 and Older (All Figure Types) |
| ASTM D 5585-1995 |
成年女子号型的人体测量标准表,2号规格 |
Standard Table of Body Measurements for Adult Female Misses Figure Type, Sizes 2-20 |
| ASTM F 140-1998 |
偏振法测定膨胀特性用的参考玻璃与金属对接密封材料的制作与试验 |
Standard Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods |
| ASTM F 1824-1997 |
水上救援者工作状况的标准指南-Ⅱ级 |
Standard Guide for Performance of a Water Rescuer-Level II |
| ASTM B 789/B 789M-1999 |
涵洞和下水道用波纹铝结构板管安装的标准实施规范 |
Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers |
| ASTM D 1305-1999 |
电绝缘纸和纸板标准规范.硫酸盐(牛皮纸)层型 |
Standard Specification for Electrical Insulating Paper and Paperboard-Sulfate (Kraft) Layer Type |
| ASTM B 679-1998 |
工程用钯的电沉积覆层标准规范 |
Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use |
| ASTM D 1386-1998 |
合成蜡和天然蜡的酸值(以实验为基础的)的试验方法 |
Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes |
| ASTM C 1429-1999 |
用双支架多收集器气体质谱仪进行六氟化铀的同位素分析的标准试验方法 |
Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer |
| ASTM D 6435-1999 |
塑料制材和型材剪切性能的标准试验方法 |
Standard Test Method for Shear Properties of Plastic Lumber and Plastic Lumber Shapes |
| ASTM B 609/B 609M-1999 |
电气用退火和中度回火的1350铝圆导线标准规范 |
Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes |
| ASTM B 498/B 498M-1998 |
钢芯加强的铝导线(ACSR)用镀锌钢芯线标准规范 |
Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) |
| ASTM D 1059-1997 |
基于短长度样品的纱线支数试验方法 |
Test Method for Yarn Number Based on Short-Length Specimens |
| ASTM B 780-1998 |
含银75%、铜24.5%及镍0.5%的电触点合金标准规范 |
Standard Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy |
| ASTM F 1983-1999 |
植入用可吸收和再吸收的生物材料的兼容性评定的标准操作规程 |
Standard Practice for Assessment of Compatibiltiy of Absorbable/Resorbable Biomaterials for Implant Applications |
| ASTM F 1984-1999 |
用固体材料测试血浆中整个活性的标准操作规程 |
Standard Practice for Testing for Whole Complement Activation in Serum by Solid Materials |
| ASTM G 145-1996 |
研究氧气系统火灾事故的标准指南 |
Standard Guide for Studying Fire Incidents in Oxygen Systems |
| ASTM D 6168-1997 |
确定土壤、岩石和其所含液体描述信息的现场收集用场所所要求的最小数据元集合的选择的标准指南 |
Standard Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids |
| ASTM A 991/A 991M-1998 |
热处理钢产品用炉的温度传导均匀性测量标准试验方法 |
Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products |
| ASTM D 1176-1998 |
试验用发动机冷却剂或防锈剂水溶液的取样和制备的标准方法 |
Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes |
| ASTM D 1168-1999 |
电绝缘用烃类石蜡的标准试验方法 |
Standard Test Methods for Hydrocarbon Waxes Used for Electrical Insulation |
| ASTM D 2370-1998 |
有机涂层抗拉性能试验方法 |
Standard Test Method for Tensile Properties of Organic Coatings |
| ASTM D 2339-1998 |
用拉伸负荷法测定双层胶合板结构中胶粘剂剪切强度特性的标准试验方法 |
Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading |
| ASTM D 1184-1998 |
胶粘剂粘结的层压部件挠曲强度的试验方法 |
Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies |
| ASTM C 1375-1997 |
用于测试建筑物密封和胶粘剂的基质的标准指南 |
Standard Guide for Substrates Used in Testing Building Seals and Sealants |
| ASTM D 2533-1999 |
火花点火发动机燃料气液比的试验方法 |
Test Method for Vapor-Liquid Ratio of Spark-Ignition Engine Fuels |
| ASTM D 1123-1999 |
卡尔.费歇尔试剂法测定发动机冷却剂浓缩物中水含量的试验方法 |
Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| ASTM D 2197-1998 |
用刮板式粘合试验器测定有机涂层粘合性的试验方法 |
Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion |
| ASTM D 4840-1999 |
保管系列程序抽样标准指南 |
Standard Guide for Sampling Chain-of-Custody Procedures |
| ASTM E 1116-1998 |
杀虫剂可乳化浓缩物乳化特性的标准试验方法 |
Standard Test Method for Emulsification Characteristics of Pesticide Emulsifiable Concentrates |
| ASTM B 734-1997 |
工程用电沉积镀铜标准规范 |
Standard Specification for Electrodeposited Copper for Engineering Uses |
| ASTM D 1244-1998 |
纱线结构的名称与符号 |
Designation of Yarn Construction |
| ASTM B 617-1998 |
电触点货币银合金标准规范 |
Standard Specification for Coin Silver Electrical Contact Alloy |
| ASTM D 6445-1999 |
能量分散X射线荧光光谱法测定汽油中硫的标准试验方法 |
Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry |
| ASTM D 6452-1999 |
用于地下水质调查的井的净化方法的标准指南 |
Standard Guide for Purging Methods for Wells Used for Ground-Water Quality Investigations |
| ASTM F 1757-1996 |
计算机系统数字通讯协议的标准指南 |
Standard Guide for Digital Communication Protocols for Computerized Systems |
| ASTM E 649-2000 |
氯中溴含量的标准试验方法 |
Standard Test Method for Bromine in Chlorine |
| ASTM C 28/C 28M-2000 |
石膏浆标准规范 |
Standard Specification for Gypsum Plasters |
| ASTM D 3150-2000 |
电绝缘用交联及非交联聚氯乙烯热收缩管的标准规范 |
Standard Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation |
| ASTM C 1466-2000 |
用石墨原子反应堆吸收光谱法测定陶瓷食品器皿中铅和镉的标准试验方法 |
Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted from Ceramic Foodware |
| ASTM B 904-2000 |
电磁干扰屏蔽用自催化铜上的自催化镍的标准规范 |
Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding |
| ASTM D 2269-1999 |
紫外线吸收法评定白色矿物油的标准试验方法 |
Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption |
| ASTM C 22/C 22M-2000 |
石膏标准规范 |
Standard Specification for Gypsum |
| ASTM C 20-2000 |
用沸水法测定煅烧耐火砖和异型砖的表观多孔性、吸水性、表观比重及松密度的标准试验方法 |
Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water |
| ASTM B 836-2000 |
使用单输入线路结构的致密圆铝绞接导线的标准规范 |
Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction |
| ASTM D 4724-1999 |
用针入法测试线纱缠结度的标准试验方法 |
Standard Test Methods for Degree of Filament Yarn Entanglement by Needle Insertion Methods |
| ASTM G 52-2000 |
金属及合金在海水表面暴露与评定的标准实施规范 |
Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater |
| ASTM D 6539-2000 |
用流动空气测定局部饱水孔隙材料气动渗透性的标准试验方法 |
Standard Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air |
| ASTM B 905-2000 |
用机械化磁带试验评定金属和无机覆层粘附力的标准试验方法 |
Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test |
| ASTM E 2071-2000 |
从蒸气压力数据中计算汽化热或蒸馏热的标准规程 |
Standard Practice for Calculating Heat of Vaporization or Sublimation from Vapor Pressure Data |
| ASTM D 6139-2000 |
用Gledhill摇瓶测定润滑剂或其化合物需氧水中生物降解性的标准试验方法 |
Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask |
| ASTM D 1171-1999 |
橡胶变质的标准试验方法.室外或小室内橡胶表面臭氧龟裂(三角形试样) |
Standard Test Method for Rubber Deterioration-Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens) |
| ASTM D 904-1999 |
胶粘剂试样在人造光中暴露试验的标准实施规范 |
Standard Practice for Exposure of Adhesive Specimens to Artificial Light |
| ASTM D 668-1999 |
电绝缘用硬条和硬管尺度测量的标准试验方法 |
Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation |
| ASTM D 1795-1996 |
纤维素固有粘度的标准试验方法 |
Standard Test Method for Intrinsic Viscosity of Cellulose |
| ASTM D 2518-1999 |
电绝缘用机织玻璃布的标准规范 |
Standard Specification for Woven Glass Fabrics for Electrical Insulation |
| ASTM D 2400-1999 |
电绝缘用浸漆玻璃聚酯布的标准规范 |
Standard Specification for Varnished Glass-Polyester Cloth Used for Electrical Insulation |
| ASTM D 1338-1999 |
通过稠度和粘结强度测定液态或糊状胶粘剂使用寿命的标准试验方法 |
Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength |
| ASTM D 1618-1999 |
炭黑可萃取性的标准试验方法.甲苯萃取物的透射系数 |
Standard Test Method for Carbon Black Extractables - Transmittance of Toluene Extract |
| ASTM D 3443-2000 |
三氯三氟乙烷中氯化物的标准试验方法 |
Standard Test Method for Chloride in Trichlorotrifluoroethane |
| ASTM D 3301-2000 |
永久记录的贮存用折叠式文件夹的标准规范 |
Standard Specification for File Folders for Storage of Permanent Records |
| ASTM D 3290-2000 |
耐久记录用证券纸和帐薄纸的标准规范 |
Standard Specification for Bond and Ledger Papers for Permanent Records |
| ASTM D 3208-2000 |
永久记录用复写纸的标准规范 |
Standard Specification for Manifold Papers for Permanent Records |
| ASTM D 1830-1999 |
用弧形电极法测定电绝缘挠性薄片材料热稳定性的标准试验方法 |
Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method |
| ASTM D 951-1999 |
用喷射法测定船运集装箱耐水性的标准试验方法 |
Standard Test Method for Water Resistance of Shipping Containers by Spray Method |
| ASTM D 1506-1999 |
炭黑的标准测试方法.灰分含量 |
Standard Test Methods for Carbon Black-Ash Content |
| ASTM A 973/A 973M-2000 |
100级合金钢链的标准规范 |
Standard Specification for Grade 100 Alloy Steel Chain |
| ASTM C 363-2000 |
蜂窝状芯材的抗分离力的标准试验方法 |
Standard Test Method for Delamination Strength of Honeycomb Core Materials |
| ASTM F 1850-2000 |
麻醉操作工位及其部件的特殊要求的标准规范 |
Standard Specification for Particular Requirements for Anesthesia Workstations and Their Components |
| ASTM F 2017-2000 |
合同监督用船主与造船厂之间电子数据交换的数据库结构指南 |
Standard Guide for Database Structure of Electronic Data Interchange Between Ship Owner and Shipyard for Contract Administration |
| ASTM F 2024-2000 |
羟磷灰石等离子喷镀层相含量的X射线衍射测定标准实施规范 |
Standard Practice for X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings |
| ASTM E 646-2000 |
金属薄板材料拉伸应变硬化指数(N-值)的标准试验方法 |
Standard Test Method for Tensile Strain-Hardening Exponents (n-Values) of Metallic Sheet Materials |
| ASTM F 598-2000 |
测定无碳纸耐卷筒损伤能力的标准规程 |
Standard Practice for Determining the Resistance of Carbonless Papers to Capsular Damage |
| ASTM F 697-2000 |
口腔保护器使用和维护的标准实施规程 |
Standard Practice for Care and Use of Athletic Mouth Protectors |
| ASTM D 624-2000 |
常规硫化橡胶和热塑性弹性体抗撕裂强度的标准试验方法 |
Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
| ASTM D 692-2000 |
沥青铺路混合料用粗集料的标准规范 |
Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures |
| ASTM F 2038-2000 |
医疗设施中用的硅弹性体、凝胶和泡沫的标准指南.第I部分:组成和未硫化材料 |
Standard Guide for Silicone Elastomers, Gels and Foams Used in Medical Applications Part I - Formulations and Uncured Materials |
| ASTM D 3716-1999 |
地板抛光剂用乳化聚合物的标准试验方法 |
Standard Test Methods for Use of Emulsion Polymers in Floor Polishes |
| ASTM D 5646-1996 |
家用基本缝纫机针脚的标准术语 |
Standard Terminology of Basic Sewing Machine Stitches for Home Use |
| ASTM D 4855-1997 |
比较试验方法的标准实施规程 |
Standard Practice for Comparing Test Methods |
| ASTM D 1901-2000 |
卤化有机溶剂及其添加剂相对蒸发时间的标准试验方法 |
Standard Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures |
| ASTM D 4081-2000 |
干洗剂的标准规范.全氯乙烷级 |
Standard Specification for Drycleaning-Grade Perchloroethylene |
| ASTM F 1952-2000 |
山地自行车比赛用头盔的标准规范 |
Standard Specification for Helmets Used for Downhill Mountain Bicycle Racing |
| ASTM D 6578-2000 |
耐涂写性测定的标准实施规程 |
Standard Practice for Determination of Graffiti Resistance |
| ASTM F 2053-2000 |
防护服材料的气载粒子渗透试验结果的文献记录的标准指南 |
Standard Guide for Documenting the Results of Airborne Particle Penetration Testing of Protective Clothing Materials |
| ASTM D 6163-2000 |
玻璃纤维增强的苯乙烯丁二烯苯乙烯(SBS)改良沥青层材料的标准规范 |
Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements |
| ASTM C 1062-2000 |
核燃料溶解装置的设计、制造和安装标准指南 |
Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities |
| ASTM D 6538-2000 |
使用自动取样器的废水取样标准指南 |
Standard Guide for Sampling Wastewater With Automatic Samplers |
| ASTM D 6580-2000 |
锌粉涂料与锌粉涂料硫化薄膜和富锌涂层硫化薄膜中金属锌含量测定的标准试验方法 |
Standard Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings |
| ASTM F 2030-2000 |
彩弹球柱体防爆盘组件评估的标准规范 |
Standard Specification for Paintball Cylinder Burst Disk Assemblies |
| ASTM F 2032-2006 |
BMX骑车用头盔的标准规范 |
Standard Specification for Helmets Used for BMX Cycling |
| ASTM E 2527-2006 |
在自然光下集中陆地光电模块和系统的电气性能评级的标准试验方法 |
Standard Test Method for Rating Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under Natural Sunlight |
| ASTM C 1469-2000 |
室温下高级陶瓷接缝的抗剪切强度的标准试验方法 |
Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature |
| ASTM D 6573/D 6573M-2000 |
通用铁丝订的货运箱标准规范 |
Standard Specification for General Purpose Wirebound Shipping Boxes |
| ASTM D 5002-1999 |
数字密度分析仪用原油密度和相对密度的标准试验方法 |
Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer |
| ASTM E 77-1998 |
温度计检验和验证的标准试验方法 |
Standard Test Method for Inspection and Verification of Thermometers |
| ASTM E 256-1998 |
用过氧化钠弹燃烧法测定有机化合物中氯含量的标准试验方法 |
Standard Test Method for Chlorine in Organic Compounds by Sodium Peroxide Bomb Ignition |
| ASTM D 5883-1996 |
园林设计及其有关用途的作为上层土中改良矿物质用旋转窑生产的空心油岩、粘土或石片的使用标准指南 |
Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes |
| ASTM C 730-1998 |
玻璃的努氏压痕硬度的标准试验方法 |
Standard Test Method for Knoop Indentation Hardness of Glass |
| ASTM B 854-1998 |
测量电接触中断用标准导则 |
Standard Guide for Measuring Electrical Contact Intermittences |
| ASTM D 585-1997 |
纸张、纸板、纤维板和相关产品的单批取样和验收标准实施规程 |
Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product |
| ASTM D 5954-1998 |
用原子吸收光谱法对天燃气中汞进行取样和测量的标准试验方法 |
Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy |
| ASTM E 200-1997 |
化学分析用试剂溶液的制备、标准化和贮存的标准操作规程 |
Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis |
| ASTM E 60-1998 |
用分子吸收分光光度法分析金属、矿和有关材料的标准操作规程 |
Standard Practice for Analysis of Metals, Ores, and Related Materials by Molecular Absorption Spectrometry |
| ASTM D 548-1997 |
纸张水溶解酸度或碱度的试验方法 |
Standard Test Method for Water-Soluble Acidity or Alkalinity of Paper |
| ASTM C 1269-1997 |
内置穿过式金属探测器操作灵敏度设置调整的标准规程 |
Standard Practice for Adjusting the Operational Sensitivity Setting of In-Plant Walk-Through Metal Detectors |
| ASTM D 5625-1997 |
铺开的纸和纸制品的长度、宽度和面积测量用标准试验方法 |
Standard Test Method for Measuring Length, Width, and Squareness of Sheeted Paper and Paper Products |
| ASTM D 645/D 645M-1997 |
纸和纸板厚度的试验方法 |
Test Method for Thickness of Paper and Paperboard |
| ASTM E 1948-1998 |
层析数据用分析数据交换协议的标准指南 |
Standard Guide for Analytical Data Interchange Protocol for Chromatographic Data |
| ASTM E 1947-1998 |
层析数据用分析数据交换协议的标准规范 |
Standard Specification for Analytical Data Interchange Protocol for Chromatographic Data |
| ASTM D 724-1999 |
纸表面可湿性的测试方法(接触角法) |
Standard Test Method for Surface Wettability of Paper (Angle-of-Contact Method) |
| ASTM E 1601-1998 |
评价分析法性能的实验室间研究用标准规程 |
Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM D 710-1997 |
电绝缘用硫化纤维薄板、杆材和管标准规范 |
Standard Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation |
| ASTM E 243-1997 |
铜及铜合金管的电磁(涡流)检验 |
Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes |
| ASTM E 234-1998 |
不饱和脂化合物总溴值的标准试验方法 |
Standard Test Method for Total Bromine Number of Unsaturated Aliphatic Chemicals |
| ASTM F 623-1999 |
弗利医用导管的性能规范 |
Standard Performance Specification for Foley Catheter |
| ASTM F 528-1999 |
结型晶体管共射极直流增益测量的标准试验方法 |
Standard Test Method of Measurement of Common-Emitter D-C Current Gain of Junction Transistors |
| ASTM D 3061-1997 |
三铰钢和马口铁制直壁和边缘向内弯曲的气溶胶罐标准导则 |
Standard Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans |
| ASTM D 2124-1999 |
用红外线分光光度法分析聚氯乙烯组分的标准试验方法 |
Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique |
| ASTM D 5515-1997 |
用膨胀计测定烟煤膨胀特性的标准试验方法 |
Standard Test Method for Determination of the Swelling Properties of Bituminous Coal Using a Dilatometer |
| ASTM E 1637-1998 |
结构固定接缝铝屋顶镶板系统的标准规范 |
Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems |
| ASTM E 1745-1997 |
混凝土板下土壤或粒状填料接触的水蒸气缓凝剂用标准规范 |
Standard Specification for Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs |
| ASTM B 500/B 500M-1998 |
钢芯加强铝导线(ACSR)用金属涂覆绞合钢芯线标准规范 |
Standard Specification for Metallic Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced (ACSR) |
| ASTM B 477-1997 |
金银镍电触点合金标准规范 |
Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy |
| ASTM D 6151-1997 |
地质技术勘探和土壤取样用空茎轴螺旋钻使用的标准操作规程 |
Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling |
| ASTM E 1657-1998 |
液相色谱用可变波长光度探测器试验的标准规程 |
Standard Practice for Testing Variable-Wavelength Photometric Detectors Used in Liquid Chromatography |
| ASTM B 380-1997 |
装饰电镀层的涂膏密室耐蚀试验标准试验方法范 |
Standard Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure |
| ASTM C 684-1999 |
混凝土压力试样的制作、快速养护和测试的标准试验方法 |
Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens |
| ASTM D 629-1999 |
纺织品定量分析标准试验方法 |
Standard Test Methods for Quantitative Analysis of Textiles |
| ASTM D 565-1999 |
白色矿物油中可碳化物质的标准试验方法 |
Standard Test Method for Carbonizable Substances in White Mineral Oil |
| ASTM B 466-1998 |
无缝铜镍合金管 |
Seamless Copper-Nickel Pipe and Tube |
| ASTM D 518-1999 |
橡胶变质的标准试验方法.表面龟裂 |
Standard Test Method for Rubber Deterioration-Surface Cracking |
| ASTM F 375-1989 |
集成电路引线框材料 |
Integrated Circuit Lead Frame Material |
| ASTM F 1894-1998 |
定量分析硅化钨半导体加工膜组分和厚度的标准试验方法 |
Test Method for Quantifying Tungsten Silicide Semiconductor Process Films for Composition and Thickness |
| ASTM F 1833-1997 |
跑鞋后脚运动控制特性比对的标准试验方法 |
Standard Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes |
| ASTM B 372-1997 |
无缝铜及铜合金矩形波导管标准规范 |
Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube |
| ASTM F 1806-1997 |
轮胎试验操作标准规程.基准轮胎用基本概念和术语 |
Standard Practice for Tire Testing Operations - Basic Concepts and Terminology for Reference Tire Use |
| ASTM E 1942-1998 |
评价用于周期疲劳和断裂力学试验的标准指南 |
Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing |
| ASTM E 1085-1995 |
金属的X射线辐射光谱测定分析试验方法 |
Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels |
| ASTM D 6461-1999 |
拦淤栅栏用材料的标准规范 |
Standard Specification for Silt Fence Materials |
| ASTM A 1002-1999 |
镍铝有序合金铸件的标准规范 |
Standard Specification for Castings, Nickel-Aluminum Ordered Alloy |
| ASTM C 541-1998 |
石棉水泥管道用衬料标准规范 |
Standard Specification for Linings for Asbestos-Cement Pipe |
| ASTM C 530-1999 |
结构用不承重粘土隔墙砖标准规范 |
Standard Specification for Structural Clay Nonloadbearing Screen Tile |
| ASTM B 352-1997 |
核用锆及锆合金板、带材和板标准规范 |
Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application |
| ASTM B 351-1997 |
核用热轧和冷加工锆及锆合金棒材、杆材和线材标准规范 |
Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application |
| ASTM B 349/B 349M-1998 |
核用海绵锆和其他形式的原生金属标准规范 |
Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application |
| ASTM F 1500-1998 |
利用溶剂作为食品模拟物定性测定微波感受器中非紫外线吸收非挥发萃取物的标准试验方法 |
Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants |
| ASTM D 5344-1999 |
部分取向纱延展力的标准试验方法 |
Standard Test Method for Extension Force of Partially Oriented Yarn |
| ASTM E 28-1999 |
用环球仪测定从松脂制品中取得的树脂的软化点的标准试验方法 |
Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus |
| ASTM D 3395-1999 |
橡胶变质的标准试验方法.小室中动态臭氧龟裂的试验 |
Standard Test Methods for Rubber Deterioration-Dynamic Ozone Cracking in a Chamber |
| ASTM D 4575-1999 |
橡胶变质的标准试验方法.测定实验室测试小室内臭氧浓度的参照法和交替法 |
Standard Test Methods for Rubber Deterioration - Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers |
| ASTM D 4471-2000 |
直接滴定法测定甲苯基酸中吡淀碱的标准试验方法 |
Standard Test Method for Pyridine Bases in Cresylic Acid by Direct Titration |
| ASTM D 2202-2000 |
密封料塌落的标准试验方法 |
Standard Test Method for Slump of Sealants |
| ASTM D 2201-1999 |
试验涂料及相关镀覆产品用镀锌和镀锌合金钢板的制备的标准操作规程 |
Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products |
| ASTM D 1036-1999 |
木电杆的标准静态试验方法 |
Standard Test Methods of Static Tests of Wood Poles |
| ASTM D 806-2000 |
硬化土-水泥混合料中水泥含量的标准试验方法 |
Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures |
| ASTM D 609-2000 |
涂料、清漆、转化涂层和相关覆层产品的测试用冷轧钢板制备的标准实施规范 |
Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products |
| ASTM D 5310-2000 |
用毛细管气体色谱测定焦油酸成份的标准试验方法 |
Standard Test Method for Tar Acid Composition by Capillary Gas Chromatography |
| ASTM D 1970-2000 |
冰坝防护用作为陡斜屋面衬底的自粘聚合物改良型沥青板材料的标准规范 |
Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection |
| ASTM D 1293-1999 |
水pH值的标准测试方法 |
Standard Test Methods for pH of Water |
| ASTM D 1280-2000 |
浸槽式金属除垢剂的全浸腐蚀试验的标准指南 |
Standard Guide for Total Immersion Corrosion Test for Soak Tank Metal Cleaners |
| ASTM D 129-2000 |
石油产品中硫含量的标准试验方法(氧弹法) |
Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) |
| ASTM E 594-1996 |
气相色谱法或超临界液相色谱法中使用的检验火焰电离探测器的标准操作规程 |
Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography |
| ASTM D 1370-2000 |
沥青材料间接触相容性的标准试验方法(奥林萨斯试验) |
Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test) |
| ASTM F 1900-1998 |
用行走模拟器进行鞋靴耐水标准试验方法 |
Standard Test Method for Water Resistance of Footwear Using a Walking Step Simulator |
| ASTM D 6286-1998 |
环境位点特性分析用钻削方法选择的标准指南 |
Standard Guide for Selection of Drilling Methods for Environmental Site Characterization |
| ASTM D 6314-1998 |
碳氟化合物全氟甲氧基树脂(MFA)模制和挤压材料的标准规范 |
Standard Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials |
| ASTM D 6265-1998 |
用挤压机滤膜试验对聚合物内污染物分离的标准操作规程 |
Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test |
| ASTM A 478-1997 |
铬镍不锈钢和耐热钢制的编织钢丝的标准规范 |
Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire |
| ASTM E 1981-1998 |
用加速率量热计法评定材料热稳定性的标准指南 |
Standard Guide for Assessing the Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry |
| ASTM D 2175-1997 |
纸的书本松厚度和书本体积膨胀值的标准试验方法 |
Standard Test Method for Book Bulk and Book Bulking Number of Paper |
| ASTM D 2149-1997 |
频率为10MHz温度至500℃的固体陶瓷电介质电容率(介电常数)及损耗因数的测试方法 |
Standard Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Ceramic Dielectrics At Frequencies To 10 MHz And Temperatures To 500°C |
| ASTM D 2131-1997 |
天然白云母的剥离片标准规范 |
Standard Specification for Natural Muscovite Mica Splittings |
| ASTM D 6261-1998 |
由热塑聚酯(TPES)制造的挤压和压缩铸模基础型材的标准规范 |
Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES) |
| ASTM D 6268-1998 |
HFC-125五氟乙烷的装卸、运输和存储的标准实施规范 |
Standard Practice for Handling, Transportation, and Storage of HFC-125, Pentafluoroethane (C2HF5) |
| ASTM D 6263-1998 |
由硬质聚氯乙烯(PVC)和氯化聚氯乙烯(CPVC)制造的挤压的棍材和棒材的标准规范 |
Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) |
| ASTM F 1767-1998 |
搜寻和救援用ICS表格的标准指南 |
Standard Guide for Forms Used for Search and Rescue |
| ASTM F 1876-1998 |
外科植入用聚醚酮醚二酮树脂的标准规范 |
Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications |
| ASTM F 1928-1998 |
娱乐小型汽车的用户娱乐用的标准安全指南 |
Standard Safety Guide for Consumer Recreational Use of Fun-Karts |
| ASTM F 1944-1998 |
测定由喷墨打印机产生的文本、行和实地版输出质量的标准操作规程 |
Standard Practice for Determining the Quality of the Text, Line- and Solid-Fill Output Produced by Ink Jet Printers |
| ASTM F 1942-1998 |
创建测定喷墨打印机用成像供给的油墨成品的试验目标的标准操作规程 |
Standard Practice for Creating Test Targets for Determining the Ink Yield of the Imaging Supplies Used in Ink Jet Printers |
| ASTM E 1439-1998 |
进行蛙胚胎畸形发生鉴定非洲蟾蜍属(FETAX)的标准指南 |
Standard Guide for Conducting the Frog Embryo Teratogenesis Assay-Xenopus (FETAX) |
| ASTM C 1159-1998 |
耐化学腐蚀、硬性含硫混凝土用含硫高聚物水泥的标准规范 |
Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete |
| ASTM D 906-1998 |
拉力负荷法测定胶合板结构中胶粘剂抗剪切强度特性的标准试验方法 |
Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading |
| ASTM D 903-1998 |
胶粘剂抗剥落或剥离强度的试验方法 |
Test Method for Peel or Stripping Strength of Adhesive Bonds |
| ASTM C 843-1999 |
石膏饰面粉饰的应用的标准规范 |
Standard Specification for Application of Gypsum Veneer Plaster |
| ASTM D 3889/D 3889M-1996 |
低温下压敏胶纸带的衬板粘着力的标准试验方法 |
Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature |
| ASTM D 3833/D 3833M-1996 |
压敏胶纸带水蒸气传输的标准试验方法 |
Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes |
| ASTM D 3816/D 3816M-1996 |
压敏胶纸带水渗透率的标准试验方法 |
Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes |
| ASTM C 196-2000 |
膨胀的或剥落的蛭石隔热水泥标准规范 |
Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement |
| ASTM C 148-2000 |
玻璃容器偏振检验的标准试验方法 |
Standard Test Methods for Polariscopic Examination of Glass Containers |
| ASTM F 2008-2000 |
推土机性能的定性观察标准指南 |
Standard Guide for Qualitative Observations of Skimmer Performance |
| ASTM E 2068-2000 |
滑动门窗操作力测定的标准试验方法 |
Standard Test Method for Determination of Operating Force of Sliding Windows and Doors |
| ASTM C 286-1999 |
搪瓷和陶瓷的涂金属装置相关标准术语 |
Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems |
| ASTM C 397-2000 |
化硬性耐化学腐蚀的硅酸盐及硅土灰浆使用的标准实施规范 |
Standard Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars |
| ASTM C 394-2000 |
夹层芯材的剪切疲劳标准试验方法 |
Standard Test Method for Shear Fatigue of Sandwich Core Materials |
| ASTM B 610-2000 |
金属粉末样品尺寸变化测量的标准试验方法 |
Standard Test Method for Measuring Dimensional Changes of Metal Powder Specimens |
| ASTM B 813-2000 |
铜和铜合金管钎焊用液体和软膏状助溶剂的标准规范 |
Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube |
| ASTM D 6523-2000 |
垃圾堆积场的代用日掩盖物的评价和选定的标准指南 |
Standard Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills |
| ASTM D 6396-1999 |
测试T形管上管螺纹密封层的标准试验方法 |
Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees |
| ASTM D 1599-1999 |
塑料管道和配件耐短时液压力的标准试验方法 |
Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings |
| ASTM D 6474-1999 |
高温凝胶渗透色谱法测定聚烯烃分子量分布和平均分子量的标准试验方法 |
Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography |
| ASTM E 2098-2000 |
PB级外绝缘和涂层系统(EIFS)中使用的玻璃纤维增强网暴露于氢氧化钠溶液后拉伸断裂强度测定的标准试验方法 |
Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution |
| ASTM F 2041-2000 |
彩弹球标记警告标准规范 |
Standard Specification for Paintball Marker Warnings |
| ASTM F 2043-2000 |
自行车用法的标准分类 |
Standard Classification for Bicycle Usage |
| ASTM D 6522-2000 |
用便携式分析仪测定燃天然气的往复式发动机、燃气轮机、燃烧炉和工艺加热器排放的氧化氮、一氧化碳和氧浓度 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers |
| ASTM D 6505-2000 |
检定丙基溴含量的标准试验方法 |
Standard Test Method for Assay of normal-Propyl Bromide Content |
| ASTM B 494/B 494M-1998 |
一代锆标准规范 |
Standard Specification for Primary Zirconium |
| ASTM E 1543-2000 |
热图象系统的噪声等效温差的标准试验方法 |
Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems |
| ASTM F 940-1999 |
海上建筑物及造船用保护性涂料的质量控制验收检验程序的标准操作规程 |
Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
| ASTM A 505-2000 |
热轧和冷轧合金钢薄板与带材一般要求的标准规范 |
Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
| ASTM E 1378-1999 |
实验室玻璃多功能缩颈蒸馏烧瓶和长劲烧瓶的标准规范 |
Standard Specification for Laboratory Glass Multiple Neck Distilling/Boiling Flasks |
| ASTM E 694-1999 |
实验室玻璃容积测量器具的标准规范 |
Standard Specification for Laboratory Glass Volumetric Apparatus |
| ASTM E 1479-1999 |
感应耦合等离子体光学放射分光计的描述与规定的标准规程 |
Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers |
| ASTM A 757/A 757M-2000 |
低温承压设备及其它设备用铁素体和马氏体钢铸件标准规范 |
Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service |
| ASTM E 1434-2000 |
记录数据库中纤维增强复合材料的机械试验数的标准指南 |
Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases |
| ASTM E 1095-1999 |
普通实验室用玻璃漏斗的标准规范 |
Standard Specification for Common Laboratory Glass Funnels |
| ASTM E 1544-1999 |
阶梯形砌块的结构和固体用声速测量系统对砌块进行检验产生的评估错误 |
Standard Practice for Construction of a Stepped Block and Its Use to Estimate Errors Produced by Speed-of-Sound Measurement Systems for Use on Solids |
| ASTM A 638/A 638M-2000 |
高温设备用沉积硬化铁基超级合金棒、锻件及锻坯料标准规范 |
Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service |
| ASTM F 935-2000 |
比较掩盖型修改剂的标准试验方法 |
Standard Test Method for Comparing Cover-Up Correction Media |
| ASTM E 1377-1999 |
实验室开尔达玻璃烧瓶的标准规范 |
Standard Specification for Laboratory Glass Kjeldahl Flasks |
| ASTM E 1309-2000 |
数据库中纤维增强聚合物复合材料的识别的标准指南 |
Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases |
| ASTM E 961-1997 |
可重复使用的玻璃血沉管的标准规范 |
Standard Specification for Blood Sedimentation Tube, Wintrobe, Glass, Reusable |
| ASTM D 6524-2000 |
泥碳钢筋网弹力测量的标准试验方法 |
Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs) |
| ASTM D 6508-2000 |
用毛细管离子电泳和铬酸盐电解液法测定含水物质中溶解的无机阴离子的标准试验方法 |
Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte |
| ASTM E 1166-2000 |
道路网水平路面管理 |
Standard Guide for Network Level Pavement Management |
| ASTM C 531-2000 |
耐化学腐蚀的灰浆、薄浆、整体面层和聚合物混凝土的热膨胀系数和线收缩性的标准试验方法 |
Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes |
| ASTM C 481-1999 |
夹层结构的实验室老化标准试验方法 |
Standard Test Method for Laboratory Aging of Sandwich Constructions |
| ASTM E 1302-2000 |
在水可溶混合的金属加工液条件下对动物剧毒性测试的标准指南 |
Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
| ASTM D 4643-2000 |
微波炉法测定土壤中含水量的标准试验方法 |
Standard Test Method for Determination of Water (Moisture) Content of Soil by the Microwave Oven Method |
| ASTM D 4621-1999 |
煤分析实验室的职责和质量控制的标准指南 |
Standard Guide for Quality Management in an Organization That Samples or Tests Coal and Coke |
| ASTM D 4516-2000 |
反渗透性能数据的标准化的标准操作规程 |
Standard Practice for Standardizing Reverse Osmosis Performance Data |
| ASTM D 4354-1999 |
试验用土工合成纤维织物的抽样的标准操作规程 |
Standard Practice for Sampling of Geosynthetics for Testing |
| ASTM E 692-2000 |
用高分辨率γ射线光谱分析法对照射过的核燃料中的铯137的标准试验方法 |
Standard Test Method for Determining the Content of Cesium-137 in Irradiated Nuclear Fuels by High-Resolution Gamma-Ray Spectral Analysis |
| ASTM C 480-1999 |
夹层结构挠曲蠕变的标准试验方法 |
Standard Test Method for Flexure Creep of Sandwich Constructions |
| ASTM B 115-2000 |
电解铜阴极标准规范 |
Standard Specification for Electrolytic Copper Cathode |
| ASTM B 5-2000 |
高电导率韧炼铜精炼型材标准规范 |
Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes |
| ASTM D 4833-2000 |
土工织物、地膜及其有关制品的抗击穿系数的标准试验方法 |
Standard Test Method for Index Puncture Resistance of Geotextiles, Geomembranes, and Related Products |
| ASTM D 3741-2000 |
含卤化有机溶剂的掺和物外观的标准试验方法 |
Standard Test Methods for Appearance of Admixtures Containing Halogenated Organic Solvents |
| ASTM D 4223-1999 |
沥青固定土壤的试样制备的标准操作规程 |
Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils |
| ASTM A 197/A 197M-2000 |
化铁炉可锻铸铁标准规范 |
Standard Specification for Cupola Malleable Iron |
| ASTM D 4914-1999 |
用试验井中砂子替代法在现场对土壤和岩石的密度的标准试验方法 |
Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit |
| ASTM C 922-2000 |
烧结氧化钆及二氧化铀丸标准规范 |
Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets |
| ASTM D 6507-2000 |
复合材料用纤维增强定向规则的标准实施规程 |
Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials |
| ASTM C 1458-2000 |
用量热分析进行钚、氚和241Am无损试验的标准试验方法 |
Standard Test Method for Nondestructive Assay of Plutonium, Tritium and 241Am by Calorimetric Assay |
| ASTM D 6515-2000 |
测定橡胶轴密封件从弯曲复原的标准试验方法 |
Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
| ASTM E 1520-1999 |
粘土基杀虫剂配方和每磅粒状粘土吸收剂颗粒计数的标准试验方法 |
Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations |
| ASTM E 2003-1998 |
制造中子放射线束纯度显示器的标准规程 |
Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators |
| ASTM B 696-2000 |
镉机械沉积镀层标准规范 |
Standard Specification for Coatings of Cadmium Mechanically Deposited |
| ASTM B 643-2000 |
铜铍合金无缝管标准规范 |
Standard Specification for Copper-Beryllium Alloy Seamless Tube |
| ASTM B 635-2000 |
镉锡机械沉积镀层标准规范 |
Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited |
| ASTM E 1517-1999 |
人体寄生虫OVA用液体凝胶洗发膏或香波杀虫效果的标准试验方法 |
Standard Test Method for Determining the Effectiveness of Liquid, Gel, Cream, or Shampoo Insecticides Against Human Louse Ova |
| ASTM C 860-2000 |
通过手中球试验测定耐火浆料坚实度的标准实施规程 |
Standard Practice for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test |
| ASTM C 731-2000 |
包装老化后胶乳密封料可挤压性的标准试验方法 |
Standard Test Method for Extrudability, After Package Aging, of Latex Sealants |
| ASTM F 631-1999 |
受控环境中分离器性能数据的收集的标准指南 |
Standard Guide for Collecting Skimmer Performance Data in Controlled Environments |
| ASTM F 382-1999 |
金属骨板的静态弯曲特性的测试方法和标准规范 |
Standard Specification and Test Method for Metallic Bone Plates |
| ASTM F 363-1999 |
衬垫的腐蚀试验的标准试验方法 |
Standard Test Method for Corrosion Testing of Gaskets |
| ASTM B 719-2000 |
镍铬钼钴钨铁硅合金(UNS N06333)棒标准规范 |
Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar |
| ASTM F 38-2000 |
垫片材料蠕变松驰作用的标准试验方法 |
Standard Test Methods for Creep Relaxation of a Gasket Material |
| ASTM F 1999-2000 |
刚性聚氯乙烯(PVC)栅栏系统安装的标准实施规程 |
Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems |
| ASTM E 1547-1999 |
工业和特别化学品的相关标准术语 |
Standard Terminology Relating to Industrial and Specialty Chemicals |
| ASTM E 2066-2000 |
实验室信息管理系统的鉴定标准导则 |
Standard Guide for Validation of Laboratory Information Management Systems |
| ASTM E 2064-2000 |
与诈骗心理检测(PDD)相关职业的短期连续教育的标准导则 |
Standard Guide for Minimum Continuing Education of Individuals Involved in Psychophysiological Detection of Deception (PDD) |
| ASTM D 3104-1999 |
硬沥青软化点的标准试验方法 |
Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method) |
| ASTM D 3013-1999 |
环氧基树脂模塑化合物的标准规范 |
Standard Specification for Epoxy Molding Compounds |
| ASTM E 2048-1999 |
用聚合酶链式反应方法探测结核分支杆菌复合物和其它病原分支杆菌的核酸的标准指南 |
Standard Guide for Detection of Nucleic Acids of the Mycobacterium Tuberculosis Complex and Other Pathogenic Mycobacteria by the Polymerase Chain Reaction Technique |
| ASTM B 840-1999 |
锌钴合金沉积物用电解镀层标准规范 |
Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits |
| ASTM D 3458-2000 |
永久记录用办公复印机复制品的标准规范 |
Standard Specification for Copies from Office Copying Machines for Permanent Records |
| ASTM D 3450-2000 |
内用建筑涂层可洗性的标准试验方法 |
Standard Test Method for Washability Properties of Interior Architectural Coatings |
| ASTM F 1565-2000 |
蒸气用减压阀标准规范 |
Standard Specification for Pressure-Reducing Valves for Steam Service |
| ASTM A 823-1999 |
静铸永久铸模灰铁铸件标准规范 |
Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
| ASTM A 518/A 518M-1999 |
耐腐蚀的高硅生铁铸件的标准规范 |
Standard Specification for Corrosion-Resistant High-Silicon Iron Castings |
| ASTM F 2014-2000 |
管道系统用非增强挤制T形接头标准规范 |
Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| ASTM D 6547-2000 |
双金属电偶用润滑液防腐性能的标准试验方法 |
Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple |
| ASTM D 6553-2000 |
导轨润滑剂冷却能力的标准试验方法 |
Standard Test Method for Coolant Compatibility of Way Lubricants |
| ASTM G 168-2000 |
裂缝前双束应力腐蚀样品的制作和使用标准实施规范 |
Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens |
| ASTM D 6560-2000 |
原油和石油产品中沥青质(庚烷不溶物)测定的标准试验方法 |
Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products |
| ASTM F 2044-2000 |
液位指示电气设备标准规范 |
Standard Specification for Liquid Level Indicating Equipment, Electrical |
| ASTM F 2045-2000 |
直接和间接读取液位的管形玻璃和塑料观测指示器标准规范 |
Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic |
| ASTM F 1498-2000 |
热塑性塑料管及配件用60°锥形管螺纹标准规范 |
Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings |
| ASTM D 3310-2000 |
测定粘结材料耐腐蚀性的标准试验方法 |
Standard Test Method for Determining Corrosivity of Adhesive Materials |
| ASTM D 3299-2000 |
纤维缠绕的玻璃纤维增强热固树脂耐腐蚀容器的标准规范 |
Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
| ASTM F 941-1999 |
船体表面准备和涂料涂敷的检验的标准操作规程 |
Standard Practice for Inspection of Marine Surface Preparation and Coating Application |
| ASTM C 1463-2000 |
化学和放射化学分析用含辐射和混合杂质的溶解玻璃的标准规程 |
Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis |
| ASTM A 1010-2000 |
高强度马氏体不锈钢板、薄板和带材标准规范 |
Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip |
| ASTM F 966-2000 |
全尺寸和非全尺寸的婴儿床角柱延伸件的消费者安全规范 |
Consumer Safety Specification for Full-Size and Non-Full-Size Baby Crib Corner Post Extensions |
| ASTM D 5502-2000 |
通过铝工业生产的阳极和阴极碳物理测量确定表观密度的标准试验方法 |
Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry |
| ASTM D 3610-2000 |
电位滴定法测定氧化铝基钴-钼催化剂中总钴含量的标准试验方法 |
Standard Test Method for Total Cobalt In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method |
| ASTM D 1807-2000 |
电绝缘液体折射指数和比光散度的标准试验方法 |
Standard Test Methods for Refractive Index and Specific Optical Dispersion of Electrical Insulating Liquids |
| ASTM F769M-1995 |
测量晶体管和二极漏泄电流的标准试验方法 |
Standard Test Method for Measuring Transistor and Diode Leakage Currents Metric |
| ASTM C924M-1989 |
用低压空气试验法测试混凝土污水管的标准规程 |
Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric) |
| ASTM E1036/E1036M-1996 |
用参考室测定分布的陆上光电压模量和阵列电性能的标准试验方法 |
Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells |
| ASTM D 3270-2000 |
大气和植物组织中氟化物含量分析的标准试验方法(半自动法) |
Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method) |
| ASTM D 3398-2000 |
集料颗粒形状和构造指数的标准试验方法 |
Standard Test Method for Index of Aggregate Particle Shape and Texture |
| ASTM D 3605-2000 |
原子吸收和火焰发散分光光度法测定气轮机燃料中痕量金属的标准试验方法 |
Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy |
| ASTM C 874-1999 |
耐火材料的旋转熔渣标准实施规范 |
Standard Practice for Rotary Slag Testing of Refractory Materials |
| ASTM D 1931-1999 |
电绝缘用完全硫化的硅橡胶涂层玻璃布和玻璃带的标准规范 |
Standard Specification for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation |
| ASTM C 830-2000 |
用真空压力法测定成型耐火材料表观空隙率、吸水性、表观比重和体密度的标准试验方法 |
Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure |
| ASTM E 2007-2000 |
计算机射线照相法标准指南(PSL法) |
Standard Guide for Computed Radiology (Photostimulable Luminescence (PSL) Method) |
| ASTM C 202-1993 |
耐火砖导热性的标准试验方法 |
Standard Test Method for Thermal Conductivity of Refractory Brick |
| ASTM C 126-1999 |
上釉陶瓷结构粘土面砖、饰面瓷砖和实心砌块标准规范 |
Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units |
| ASTM B666/B666M-1996 |
铝和镁制品的识别标记的标准规程 |
Standard Practice for Identification Marking of Aluminum and Magnesium Products |
| ASTM F1262M-1995 |
数字集成电路的瞬时辐射固定阈的标准指南 |
Standard Guide for Transient Radiation Upset Threshold of Digital Integrated Circuits |
| ASTM A830/A830M-1993 |
结构质量的碳钢板对化学成份要求的标准规范 |
Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements |
| ASTM B 755-2000 |
镍铬钼钨合金板、薄板和带材标准规范 |
Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip |
| ASTM B 756-2000 |
镍铬钼钨合金(UNS N06110)棒材和杆材标准规范 |
Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar |
| ASTM B 757-2000 |
镍铬钼钨合金焊接管标准规范 |
Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe |
| ASTM B 758-2000 |
镍铬钼钨合金焊接管标准规范 |
Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube |
| ASTM B 759-2000 |
镍铬钼钨合金管标准规范 |
Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube |
| ASTM C 321-2000 |
耐化学腐蚀灰浆粘结强度的标准试验方法 |
Standard Test Method for Bond Strength of Chemical-Resistant Mortars |
| ASTM D 642-2000 |
确定船用集装箱、组合件和单体加载的抗压缩能力的标准试验方法 |
Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads |
| ASTM D 748-2000 |
固定式云母介电电容器用天然云母块和云母薄片的标准规范 |
Standard Specification for Natural Block Mica and Mica Films Suitable for Use in Fixed Mica-Dielectric Capacitors |
| ASTM D 1610-2000 |
试验用皮革和皮革制品的修整的标准操作规程 |
Standard Practice for Conditioning Leather and Leather Products for Testing |
| ASTM D 1583-2001 |
干粘膜中氢离子浓度的标准试验方法 |
Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
| ASTM D 4332-2000 |
试验用调节容器、包装件或包装元件的标准操作规程 |
Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
| ASTM D 1405-2001 |
平定航空燃料净燃烧热的标准试验方法 |
Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
| ASTM C 24-2001 |
耐火和高矾土耐溶材料的溶锥当量标准试验方法 |
Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials |
| ASTM D 4923-2001 |
增强热固性塑料杆的标准规范 |
Standard Specification for Reinforced Thermosetting Plastic Poles |
| ASTM F 2065-2000 |
通过固体材料测试血清中替换途径互补活化性的标准实施规程 |
Standard Practice for Testing for Alternative Pathway Complement Activation in Serum by Solid Materials |
| ASTM D 4437-1999 |
用于粘结柔性高聚物土工薄膜材料的现场接缝完整性测定标准实施规程 |
Standard Practice for Determining the Integrity of Field Seams Used in Joining Flexible Polymeric Sheet Geomembranes |
| ASTM D 2337-2001 |
彩色喷漆冻结-熔化稳定性标准试验方法 |
Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers |
| ASTM E 2124-2001 |
性侵犯调查中设备规范和提供的标准实施规程 |
Standard Practice for the Specification for Equipment and Supplies in Sexual Assault Investigations |
| ASTM F 2076-2001 |
EMS病人报告关于接收医疗设备的通知的标准实施规程 |
Standard Practice for Communicating an EMS Patient Report to Receiving Medical Facilities |
| ASTM E 1980-2001 |
计算水平和低斜不透明表面阳光反射指数的标准实施规程 |
Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces |
| ASTM D 5648-2001 |
螺纹紧固件用胶粘剂的转矩拉力的标准试验方法 |
Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity) |
| ASTM D 5649-2001 |
紧固螺纹胶粘剂的转矩强度的标准试验方法 |
Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners |
| ASTM/ISO 14012-1996 |
环境审核导则.环境审核员的资格要求 |
Guidelines for environmental auditing--Qualification criteria for environmental auditors |
| ASTM A 49-2001 |
热处理碳素钢连接棒材、微合金连接棒材和法兰连接棒材的标准规范 |
Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars |
| ASTM A 3-2001 |
低、中、高碳素钢(未经热处理的)连接杆标准规范 |
Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated) |
| ASTM B 476-2001 |
锻制贵金属电接触材料标准规范 |
Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials |
| ASTM D 2203-2001 |
密封剂着色的标准试验方法 |
Standard Test Method for Staining from Sealants |
| ASTM D 5974-2000 |
用毛细管气相色谱法测定妥尔油分级分离产品中脂肪和树脂酸的标准试验方法 |
Standard Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography |
| ASTM D 6608-2000 |
沥青混合物中特立尼达湖地沥青识别的标准实施规程 |
Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes |
| ASTM D 4802-2002 |
聚甲基丙烯酸酯丙烯酸塑料片标准规范 |
Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet |
| ASTM D 5271-2002 |
活性污泥-污水处理系统中测定塑料材料需氧生物降解能力的标准试验方法 |
Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System |
| ASTM F 1154a-1999 |
化学防护套装舒适、配套、功能和完善性的定性评估标准实施规范 |
Standard Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Integrity of Chemical-Protective Suit Ensembles |
| ASTM F 1290a-1998 |
电熔融连接聚烯烃管及配件标准规程 |
Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings |
| ASTM D 2672a-1996 |
使用溶解粘固剂的IPS PVC管用接头的标准规范 |
Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement |
| ASTM E 1669a-1995 |
办公设备对于寻找位置、通路和道路的适用性标准分类 |
Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding |
| ASTM D 5326a-1994 |
染色胶乳涂料中颜色显现的标准试验方法 |
Standard Test Method for Color Development in Tinted Latex Paints |
| ASTM D 5497c-1994 |
钮扣的相关标准术语 |
Standard Terminology Relating to Buttons |
| ASTM D 3994a-1995 |
机织泳装织物的标准性能规范 |
Standard Performance Specification for Woven Swimwear Fabrics |
| ASTM C 308-2000 |
耐化学腐蚀树脂灰浆施工时间、凝固时间及维护凝固强度时间的标准试验方法 |
Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars |
| ASTM D 3444-2000 |
三氯三氟乙烷的酸度总值的标准试验方法 |
Standard Test Method for Total Acid Number of Trichlorotrifluoroethane |
| ASTM D 4701-2000 |
技术级氯甲烷的标准规范 |
Standard Specification for Technical Grade Methylene Chloride |
| ASTM G 165-1999 |
铁路至地面间阻力测定的标准实施规程 |
Standard Practice for Determining Rail-to-Earth Resistance |
| ASTM D 1558-1999 |
细粒土水含量渗透阻力关系的标准试验方法 |
Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils |
| ASTM C 972-2000 |
密封带的压缩恢复的标准试验方法 |
Standard Test Method for Compression-Recovery of Tape Sealant |
| ASTM C 963-2000 |
锁条衬垫的包装、识别、交货及储存标准规范 |
Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets |
| ASTM E 2050-1999 |
用燃烧红外线吸收法测定压型粉中碳总含量的标准试验方法 |
Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Method |
| ASTM A 1005/A 1005M-2000 |
双埋弧焊、纵向和螺旋焊缝、平头、无镀层、钢制总管的标准规范 |
Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded |
| ASTM C 1241-2000 |
凝固过程中胶乳密封剂体积收缩的标准试验方法 |
Standard Test Method for Volume Shrinkage of Latex Sealants During Cure |
| ASTM C 736-2000 |
胶乳密封化合物的伸缩性及粘着力的试验方法 |
Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants |
| ASTM F 1917-2000 |
婴儿被垫和有关辅助品的标准使用安全性能规范 |
Standard Consumer Safety Performance Specification for Infant Bedding and Related Accessories |
| ASTM F 1925-1999 |
外科植入物用直馏聚(L-乳酸)树脂的标准规范 |
Standard Specification for Virgin Poly(L-Lactic Acid) Resin for Surgical Implants |
| ASTM D 6502-1999 |
用X射线荧光法联机测量水中低级颗粒状溶化金属的标准试验方法 |
Standard Test Method for On-Line Measurement of Low Level Particulate and Dissolved Metals in Water by X-Ray Fluorescence (XRF) |
| ASTM D 6510-2000 |
组合屋顶系统用沥青的选定的标准指南 |
Standard Guide for Selection of Asphalt Used in Built-Up Roofing Systems |
| ASTM D 3144-2000 |
电绝缘用交联聚偏氟乙烯热收缩管的标准规范 |
Standard Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation |
| ASTM C 1453-2000 |
用点火和核级二氧化铀粉末和颗粒的氧铀原子比测定铀的标准试验方法 |
Standard Test Method for the Determination of Uranium by Ignition and the Oxygen to Uranium (O/U) Atomic Ratio of Nuclear Grade Uranium Dioxide Powders and Pellets |
| ASTM D 5451-1993 |
用取样器取样的标准实施规程 |
Standard Practice for Sampling Using a Trier Sampler |
| ASTM D 6525-2000 |
永久滚轧防腐蚀产品的标称厚度的测量的标准试验方法 |
Standard Test Method for Measuring Nominal Thickness of Permanent Rolled Erosion Control Products |
| ASTM F 1997-1999 |
触觉薄膜开关敏感度测定(针拨开法)的标准试验方法 |
Standard Test Method for Determining the Sensitivity (Teasing) of a Tactile Membrane Switch |
| ASTM F 1992-1999 |
与软性内窥镜一起使用的可重复使用的耐热内窥镜辅助仪器(EAI)再加工的标准实施规程 |
Standard Practice for Reprocessing of Reusable, Heat-Stable Endoscopic Accessory Instruments (EAI) Used with Flexible Endoscopes |
| ASTM G 164-1999 |
挠性网状物表面润滑性测定的标准试验方法 |
Standard Test Method for Determination of Surface Lubrication on Flexible Webs |
| ASTM F 1994-1999 |
船载固定泡沫灭火系统的标准试验方法 |
Standard Test Method for Shipboard Fixed Foam Firefighting Systems |
| ASTM D 6473-1999 |
防蚀用岩石的比重和吸收的标准试验方法 |
Standard Test Method for Specific Gravity and Absorption of Rock For Erosion Control |
| ASTM C 1457-2000 |
用载气萃取法测定二氧化铀粉末或颗粒中氢的总含量的标准试验方法 |
Standard Test Method for the Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction |
| ASTM C 1456-2000 |
用X射线荧光法测定氧化钆和氧化铀颗粒中铀和/或钆的标准试验方法 |
Standard Test Method for the Determination of Uranium or Gadolinium, or Both, in Gadolinium Oxide-Uranium Oxide Pellets or by X-Ray Fluorescence (XRF) |
| ASTM D 6513-2000 |
计算标准耐火试验用木框架墙超强荷载的标准实施规程 |
Standard Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Endurance Tests |
| ASTM B 903-2000 |
内部增强的无缝铜热交换器管件的标准规范 |
Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement |
| ASTM A 1006/A 1006M-2000 |
激光束焊、平头、无镀层、钢制总管的标准规范 |
Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded |
| ASTM D 1533-2000 |
用卡耳费瑟库仑滴定法测定绝缘液体中水的标准试验方法 |
Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration |
| ASTM D 3434-2000 |
室外潮湿条件用木材胶粘剂的多周期加速老化试验(自动沸腾试验)的标准试验方法 |
Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives |
| ASTM D 6485-1999 |
从层面排放的挥发性有机化学物质短期照射的强烈的刺激作用的风险特征的标准指南 |
Standard Guide for Risk Characterization of Acute and Irritant Effects of Short-Term Exposure to Volatile Organic Chemicals Emitted from Bedding Sets |
| ASTM D 6503-1999 |
用Enterolert测定水中肠球菌的标准试验方法 |
Standard Test Method for Enterococci in Water Using Enterolert |
| ASTM D 6498-1999 |
家庭危险废弃物收集方法的培训总揽的标准指南 |
Standard Guide for Household Hazardous Waste Training Outline for Household Hazardous Waste Collection Operations |
| ASTM D 6494-1999 |
可作为苯可溶性粒子的工作环境中的沥青烟雾颗粒物质的测定的标准试验方法 |
Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction |
| ASTM D 6490-1999 |
水泥粘合板用无膜成型处理的水蒸气传输的标准试验方法 |
Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels |
| ASTM D 6489-1999 |
防水涂料处理过的硬化混凝土的吸水性测定的标准试验方法 |
Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating |
| ASTM E 517-2000 |
金属薄板塑性应变率γ的标准试验方法 |
Standard Test Method for Plastic Strain Ratio r for Sheet Metal |
| ASTM E 1235-1995 |
航天器在环境受控范围内的不挥发残留物重量分析测定的标准试验方法 |
Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
| ASTM G 166-2000 |
使用期限数据统计分析的标准指南 |
Standard Guide for Statistical Analysis of Service Life Data |
| ASTM D 6481-1999 |
用能量扩散X射线荧光光谱测定法测定润滑油中磷、硫、钙和锌的标准试验方法 |
Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy |
| ASTM F 2010-2000 |
用改进的有孔板试验评定手套对穿戴者手灵活性影响的标准试验方法 |
Standard Test Method for Evaluation of Glove Effects on Wearer Hand Dexterity Using a Modified Pegboard Test |
| ASTM D 6532-2000 |
水硬水泥沙浆样本吸水性清水防护处理的效果评价的标准试验方法 |
Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens |
| ASTM D 6531-2000 |
用仪器测量含水墨的相对着色度的标准试验方法 |
Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement |
| ASTM B 784-2000 |
绝缘电缆用改进的同芯绞捻铜导线标准规范 |
Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables |
| ASTM D 1990-2000 |
实尺样品分级试验中设立目测分级尺寸木材允许参数的标准实施规程 |
Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
| ASTM D 1633-2000 |
模制土壤水泥圆筒的耐压强度用标准试验方法 |
Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders |
| ASTM D 6544-2000 |
紫外线(UV)透射试验前纺织品制作的标准实施规程 |
Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing |
| ASTM D 5171-2000 |
塑料熔合法兰按扭耐冲击的标准试验方法 |
Standard Test Method for Impact Resistance of Plastic Sew-Through Flange Buttons |
| ASTM D 6548-2000 |
薄棉卫生纸抗机械穿透性的标准试验方法 |
Standard Test Method for Resistance to Mechanical Penetration of Sanitary Tissue Papers (Ball Burst Procedure) |
| ASTM E 562-1999 |
用系统的人工逐点计数法测定体积因数的标准试验方法 |
Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count |
| ASTM F 1445-2000 |
测定直接传热纸静热灵敏度的标准试验方法 |
Standard Test Method for Determining Static Thermal Sensitivity of Direct Thermal Paper |
| ASTM C 1462-2000 |
大于15%小于20%的U-235的浓缩铀金属的标准规范 |
Standard Specification for Uranium Metal Enriched to More than 15% and Less Than 20%235 U |
| ASTM F 2037-2000 |
典型办公环境背光保存条件下喷墨印刷品寿命预测的标准实施规范 |
Standard Practice for Predicting the Lifetime of Ink Jet Prints Stored in Dark Keeping Conditions in Typical Office Environments |
| ASTM F 2039-2000 |
船上职业安全与劳动保护方案中基本要点的标准指南 |
Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program |
| ASTM D 3803-1991 |
核级活性碳的标准试验方法 |
Standard Test Method for Nuclear-Grade Activated Carbon |
| ASTM D 3949-1999 |
电绝缘用玻璃涂层织物的标准规范 |
Standard Specification for Coated Glass Fabrics Used for Electrical Insulation |
| ASTM C 1292-2000 |
室温下连续纤维增强高级陶瓷剪切强度的标准试验方法 |
Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
| ASTM D 4928-2000 |
用电量计卡耳费瑟滴定法测定原油中水的标准试验方法 |
Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration |
| ASTM D 4945-2000 |
桩的高应力动态试验的标准试验方法 |
Standard Test Method for High-Strain Dynamic Testing of Piles |
| ASTM E 2029-1999 |
用示踪气体稀释法测量管道中体积和质量流量率的标准试验方法 |
Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution |
| ASTM C 1443-1999 |
完全退火的船窗用圆形玻璃标准规范 |
Standard Specification for Glasses, Portlight, Circular, Fully Tempered |
| ASTM D 6454-1999 |
测定草地增强垫层短期压缩变形的标准试验方法 |
Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs) |
| ASTM D 6015-2000 |
测定皮革静态吸水性的标准试验方法 |
Standard Test Method for Static Water Absorption of Leather |
| ASTM D 459-2000 |
肥皂和其他洗涤剂的有关标准术语 |
Standard Terminology Relating to Soaps and Other Detergents |
| ASTM B 810-2000 |
通过铜试棒质量变化对大气腐蚀试验室进行校准的标准试验方法 |
Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons |
| ASTM D 387-2000 |
使用机械研磨机测定有色颜料主色和着色强度的标准试验方法 |
Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller |
| ASTM D 372-2000 |
电绝缘用经处理软套管的标准规范 |
Standard Specification for Flexible Treated Sleeving Used for Electrical Insulation |
| ASTM D 378-2000 |
橡胶(弹性)扁平传送带的标准试验方法 |
Standard Test Methods for Rubber (Elastomeric) Belting, Flat Type |
| ASTM D 5777-2000 |
地下勘探用震波折射法的标准导则 |
Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation |
| ASTM D 5727-2000 |
乳状精炼煤焦油的标准规范(矿胶体型) |
Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type) |
| ASTM D 5582-2000 |
用干燥器测定木制品中甲醛水平的标准试验方法 |
Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator |
| ASTM D 4770-2000 |
评定用于充填外衣的人造纤维棉絮的标准试验方法 |
Standard Test Method for Appearance and Integrity of Highloft Battting After Refurbishing |
| ASTM G 161-2000 |
有关腐蚀失败分析的标准指南 |
Standard Guide for Corrosion-Related Failure Analysis |
| ASTM F 2009-2000 |
测定模块化假体锥形连接的轴向拆解力的标准试验方法 |
Standard Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses |
| ASTM D 4464-2000 |
激光散射测定催化材料粒度分布的标准试验方法 |
Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering |
| ASTM D 5144-2000 |
核发电厂保护涂料标准使用的标准指南 |
Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants |
| ASTM E 1531-2000 |
用琼脂生长法直接检测细胞培养中枝原体属染菌的标准实施规程 |
Standard Practice for Detection of Mycoplasma Contamination of Cell Cultures by Growth on Agarose Medium |
| ASTM B 768-1999 |
铜钴铍合金和铜镍铍合金带材和板材标准规范 |
Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet |
| ASTM E 394-2000 |
用1,10-菲咯啉法测定痕量铁值的标准试验方法 |
Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method |
| ASTM E 359-2000 |
苏打灰(纯碱)分析的标准试验方法 |
Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate) |
| ASTM E 1536-2000 |
用大容量试验法探测牛血清支原体污染物的标准实施规程 |
Standard Practice for Detection of Mycoplasma Contamination of Bovine Serum by Large Volume Method |
| ASTM E 1532-2000 |
用二苯甲酰胺与DNA结合荧光染料法检测细胞培养中支原体污染物的标准实施规程 |
Standard Practice for Detection of Mycoplasma Contamination of Cell Cultures by Use of Bisbenzamide DNA-Binding Fluorochrome |
| ASTM E 1324-2000 |
超声检验装置的某些电子特性测定的标准指南 |
Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Examination Instruments |
| ASTM A 972/A 972M-2000 |
熔接环氧树脂涂覆管桩标准规范 |
Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles |
| ASTM D 2612-1999 |
静态试验条件下纱条和毛条中纤维粘附力的标准试验方法 |
Standard Test Method for Fiber Cohesion in Sliver and Top in Static Tests |
| ASTM D 2718-2000 |
结构受力壁板平面剪切(滚剪)的试验方法 |
Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear) |
| ASTM B 790/B 790M-2000 |
涵洞、排水和其它地下管道用波纹铝管、管拱和拱结构设计的标准实施规程 |
Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits |
| ASTM D 6600-2000 |
评价橡胶试验方法的试验敏感性的标准操作规程 |
Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods |
| ASTM D 542-2000 |
透明有机塑料的折射指数的标准试验方法 |
Standard Test Method for Index of Refraction of Transparent Organic Plastics |
| ASTM E 875-2000 |
造纸工业中含水基制品用作为防腐剂的真菌控制剂的效力的标准测试方法 |
Standard Test Method for Efficacy of Fungal Control Agents as Preservatives for Aqueous-Based Products Used in the Paper Industry |
| ASTM C 138-2001 |
混凝土的单位重量分析、屈服点及空气含量测定(重量计算)的标准试验方法 |
Standard Test Method for Unit Weight, Yield, and Air Content (Gravimetric) of Concrete |
| ASTM E 1105-2000 |
用统一的或循环的静态气压差法现场测定已安装的外窗、天窗、护墙及门渗水度的标准测试方法 |
Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform or Cyclic Static Air Pressure Difference |
| ASTM F 2060-2000 |
冷季维护运动场草皮的标准指南 |
Standard Guide for Maintaining Cool Season Turfgrasses on Athletic Fields |
| ASTM C 1181-2000 |
耐化学腐蚀共聚物机械灰浆压缩蠕变标准试验方法 |
Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts |
| ASTM E 1070-2000 |
用磷酸测定法测定铁矿石中磷含量的标准试验方法 |
Standard Test Method for Determination of Phosphorus in Iron Ores by the Phosphometric Method |
| ASTM D 955-2000 |
热塑塑料的模型尺寸收缩率测量的标准试验方法 |
Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics |
| ASTM D 1025-2000 |
聚合级丁二烯中不挥发性残余物的标准试验方法 |
Standard Test Method for Nonvolatile Residue of Polymerization Grade Butadiene |
| ASTM D 6621-2000 |
芳香烃材料用加工分析仪的性能检验的标准操作规程 |
Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials |
| ASTM E 2109-2000 |
测定热喷镀涂层孔隙率面积百分比的试验方法 |
Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings |
| ASTM C 195-2000 |
矿物纤维隔热水泥的标准规范 |
Standard Specification for Mineral Fiber Thermal Insulating Cement |
| ASTM C 212-2000 |
建筑用饰面瓷砖的标准规范 |
Standard Specification for Structural Clay Facing Tile |
| ASTM C 296-2000 |
石棉水泥压力管的标准规范 |
Standard Specification for Asbestos-Cement Pressure Pipe |
| ASTM B 497-2000 |
闭合跳火触点上电压降的测量的标准规范 |
Standard Guide for Measuring Voltage Drop on Closed Arcing Contacts |
| ASTM B 560-2000 |
新的锡铅合金的标准规范 |
Standard Specification for Modern Pewter Alloys |
| ASTM B 723-2000 |
镍铬钼钴钨铁硅合金焊接管的标准规范 |
Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe |
| ASTM E 1564-2000 |
用于保存低温防腐生物材料的低温冷藏设备的设计与维护标准指南 |
Standard Guide for Design and Maintenance of Low-Temperature Storage Facilities for Maintaining Cryopreserved Biological Materials |
| ASTM E 1565-2000 |
低温下保存的生物材料库存量控制与搬运的标准指南 |
Standard Guide for Inventory Control and Handling of Biological Material Maintained at Low Temperatures |
| ASTM E 1566-2000 |
放在液氮中的危险生物材料搬运的标准指南 |
Standard Guide for Handling Hazardous Biological Materials in Liquid Nitrogen |
| ASTM D 6419-2000 |
单张纸和冷固卷筒胶印油墨的挥发物含量的标准试验方法 |
Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks |
| ASTM F 1492-2000 |
溜冰板和滚轴溜冰用的保护头盔标准规范 |
Standard Specifications for Helmets Used in Skateboarding and Trick Roller Skating |
| ASTM D 1634-2000 |
用横梁弯曲断裂部分测定掺土水泥抗压强度的标准试验方法(改良立方体法) |
Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method) |
| ASTM D 1635-2000 |
用简支梁三点负荷法测定掺土水泥抗挠强度的标准试验方法 |
Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading |
| ASTM C 1217-2000 |
核材料及放射性材料处理用设备设计的标准导则 |
Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials |
| ASTM D 5619-2000 |
使用攻丝转矩试验机比较除金属流体的标准试验方法 |
Standard Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine |
| ASTM D 4786-2000 |
单孔缝合抗斯裂强度的标准试验方法 |
Standard Test Method for Stitch Tear Strength, Single Hole |
| ASTM D 4831-2000 |
皮革扣环抗扯裂强度的标准试验方法 |
Standard Test Method for Buckle Tear Strength of Leather |
| ASTM D 4688-1999 |
评定榫接木材粘结用结构胶粘剂的标准试验方法 |
Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber |
| ASTM D 2902-2000 |
电绝缘用含氟聚合物树脂热收缩管的标准规范 |
Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation |
| ASTM E 324-1999 |
有机化合物的相对始熔点及终熔点和熔化范围的标准试验方法 |
Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals |
| ASTM D 6543-2000 |
用流线煤分析仪进行的测量评价的标准指南 |
Standard Guide to the Evaluation of Measurements Made by On-Line Coal Analyzers |
| ASTM D 6529-2000 |
馈送50-1000uS/cm的连续电去电离作用系统的操作性能的标准试验方法 |
Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50-1000 uS/cm |
| ASTM G 33-1999 |
金属镀层钢样品对大气腐蚀检测数据的记录的标准操作规程 |
Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens |
| ASTM E 2087-2000 |
可控健康词汇用质量显示器的标准规范 |
Standard Specification for Quality Indicators for Controlled Health Vocabularies |
| ASTM D 6500-2000 |
用光导纤维直径分析仪测定羊毛和其它动物纤维直径的标准试验方法 |
Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser |
| ASTM A 476/A 476M-2000 |
造纸厂干燥机辊用球墨铸铁铸件的标准规范 |
Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
| ASTM D 6014-2000 |
测定皮革表面动态吸水性的标准试验方法 |
Standard Test Method for Determination of Dynamic Water Absorption of Leather Surfaces |
| ASTM C 1370-2000 |
用于化学稳定的硫聚合物水泥混凝土和化学稳定的其他聚合物混凝土中的集料化学稳定性测定的标准试验方法 |
Standard Test Method for Determining the Chemical Resistance of Aggregates for Use in Chemical-Resistant Sulfur Polymer Cement Concrete and Other Chemical-Resistant Polymer Concretes |
| ASTM F 2048-2000 |
防滑试验结果报告的标准实施规范 |
Standard Practice for Reporting Slip Resistance Test Results |
| ASTM F 2018-2000 |
使用平应力拉伸样品测定塑料老化时间的标准试验方法 |
Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens |
| ASTM D 4933-1999 |
木材和木基材料湿度的调节的标准指南 |
Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials |
| ASTM F 1409-2000 |
清洁地毯时真空吸尘器直线移动的标准试验方法 |
Standard Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets |
| ASTM F 1130-1999 |
船涂覆系统检验的标准实施规程 |
Standard Practice for Inspecting the Coating System of a Ship |
| ASTM E 1462-2000 |
光电器件模块的完整性绝缘和连续地面路径的标准试验方法 |
Standard Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules |
| ASTM E 1685-2000 |
使用超声脉冲回波技术测量紧固件长度变化的标准操作规程 |
Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique |
| ASTM D 2344/D 2344M-2000 |
聚合母体组合材料及其层压制件的短梁强度的标准试验方法 |
Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates |
| ASTM D 3794-2000 |
线圈涂料试验的标准指南 |
Standard Guide for Testing Coil Coatings |
| ASTM D 3043-2000 |
检验结构板弯曲情况的标准方法 |
Standard Test Methods for Structural Panels in Flexure |
| ASTM D 3039/D 3039M-2000 |
聚合母体混合材料抗拉特性的标准试验方法 |
Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials |
| ASTM E 633-2000 |
空气中在1800°F(1000℃)时蠕变试验和应力破裂试验用热电偶的使用的标准指南 |
Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air |
| ASTM D 3320-2000 |
乳化煤焦油沥青的标准规范(矿物胶体型) |
Standard Specification for Emulsified Coal-Tar Pitch (Mineral Colloid Type) |
| ASTM D 5341-1999 |
测量焦炭活性指数(CRI)和反应后的焦碳强度(CSR)的标准试验方法 |
Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR) |
| ASTM D 5111-1999 |
非都市地区监测大气沉积物的选址和取样方法的标准指南 |
Standard Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations |
| ASTM D 5109-1999 |
印刷线路板用铜覆层热固层压材料的标准试验方法 |
Standard Test Methods for Copper-Clad Thermosetting Laminates for Printed Wiring Boards |
| ASTM F 2027-2000 |
组织工程医疗产品用衬底材料特征描述和试验的标准指南 |
Standard Guide for Characterization and Testing of Substrate Materials for Tissue-Engineered Medical Products |
| ASTM D 2759-2000 |
在正压力下从变压器中抽取气体样品的标准实施规程 |
Standard Practice for Sampling Gas from a Transformer Under Positive Pressure |
| ASTM D 5599-2000 |
气相色谱法和氧离子燃烧法测定气体氧化反应的标准试验方法 |
Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection |
| ASTM D 6116-2000 |
阻塞的标准试验方法 |
Standard Test Method for Blocking |
| ASTM C 633-2001 |
热喷涂层的粘附力或粘结强度的标准试验方法 |
Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings |
| ASTM D 4124-2001 |
沥青分离为四种馏分的标准试验方法 |
Standard Test Methods for Separation of Asphalt into Four Fractions |
| ASTM F 2078-2001 |
与氢脆化试验相关的标准术语 |
Standard Terminology Relating to Hydrogen Embrittlement Testing |
| ASTM D 4161-2001 |
使用挠性弹性体密封件的"玻璃钢"(玻璃纤维增强热固树脂)管接头标准规范 |
Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals |
| ASTM D 3847-2001 |
橡胶的标准实施规程.获取低于标准的试验温度的导则 |
Standard Practice for Rubber-Directions for Achieving Subnormal Test Temperatures |
| ASTM A 810-2001 |
热浸镀锌钢管用绕网标准规范 |
Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh |
| ASTM E 298-2001 |
检定有机过氧化物的标准试验方法 |
Standard Test Methods for Assay of Organic Peroxides |
| ASTM D 4118-2001 |
妇女用机织工作服、劳动布、工装裤及车间涂层织物的标准性能规范 |
Standard Performance Specification for Women's Woven Coverall, Dungaree, Overall, and Shop Coat Fabrics |
| ASTM C 877-2001 |
混凝土管、人孔和预制箱形截面用外部密封带的标准规范 |
Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections |
| ASTM D 6611-2000 |
干湿纱耐磨性的标准试验方法 |
Standard Test Method for Wet and Dry Yarn-on-Yarn Abrasion Resistance |
| ASTM E 1411-2001 |
X射线透视系统鉴定的标准实施规程 |
Standard Practice for Qualification of Radioscopic Systems |
| ASTM F 429-2001 |
橄榄球运动用防护头盔的减冲击性能的标准试验方法 |
Standard Test Method for Shock-Attenuation Characteristics of Protective Headgear for Football |
| ASTM E 3-2001 |
金相试样制备的标准指南 |
Standard Guide for Preparation of Metallographic Specimens |
| ASTM D 5758-2001 |
X射线绕射法测定沸石ZSM-5相对结晶度的标准试验方法 |
Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction |
| ASTM D 5606-2001 |
甲苯二氰酸盐(TDI)原料用甲苯的标准规范 |
Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock |
| ASTM D 5498-2001 |
核设施喷涂工作检验人员培训计划编制标准指南 |
Standard Guide for Developing a Training Program for Coating Work Inspectors in Nuclear Facilities |
| ASTM B 685-2001 |
钯铜电接触材料标准规范 |
Standard Specification for Palladium-Copper Electrical Contact Material |
| ASTM D 365-2001 |
可溶性硝酸纤维素基溶液的标准指南 |
Standard Guide for Soluble Nitrocellulose Base Solutions |
| ASTM D 333-2001 |
透明漆和着色漆的标准指南 |
Standard Guide for Clear and Pigmented Lacquers |
| ASTM D 1644-2001 |
清漆中不挥发物含量的标准试验方法 |
Standard Test Methods for Nonvolatile Content of Varnishes |
| ASTM D 3003-2001 |
金属衬底表面有机涂层耐压力斑迹和抗粘连性标准试验方法 |
Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates |
| ASTM D 3021-2001 |
酞菁绿颜料标准规范 |
Standard Specification for Phthalocyanine Green Pigments |
| ASTM D 1511-2000 |
碳黑的标准试验方法.片状尺寸分布 |
Standard Test Method for Carbon Black - Pellet Size Distribution |
| ASTM E 1845-2001 |
铺地织物中间纵面深度计算的标准实施规程 |
Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth |
| ASTM F 1718-2001 |
旋转式正排量蒸馏燃油泵标准规范 |
Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM A 780-2001 |
热浸镀锌层的损坏区域及无覆层区域的检修标准实施规程 |
Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings |
| ASTM E 557-2000 |
活动间壁安装的标准指南 |
Standard Guide for The Installation of Operable Partitions |
| ASTM D 4562-2001 |
用杆和杆环试样测试胶粘剂剪切强度的标准试验方法 |
Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
| ASTM B 188-2002 |
汇流无缝铜管的标准规范 |
Standard Specification for Seamless Copper Bus Pipe and Tube |
| ASTM B 193-2002 |
导电体材料电阻率的标准测试方法 |
Standard Test Method for Resistivity of Electrical Conductor Materials |
| ASTM D 5195-2002 |
用核子法测量地表深处应有位置的土壤和岩石密度的标准试验方法 |
Standard Test Method for Density of Soil and Rock In-Place at Depths Below the Surface by Nuclear Methods |
| ASTM F 922-2001 |
家用电动喷头的电动机寿命评估的标准试验方法 |
Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle |
| ASTM F 595-2001 |
真空吸尘器软管的耐用性及可靠性试验(全塑软管)的标准试验方法 |
Standard Test Methods for Vacuum Cleaner Hose - Durability and Reliability (All-Plastic Hose) |
| ASTM F 555-2001 |
家用真空吸尘器的电动机寿命评定的标准试验方法 |
Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner |
| ASTM F 450-2001 |
真空吸尘器软管的耐热性及可靠性的标准试验方法 |
Standard Test Methods for Vacuum Cleaner Hose - Durability and Reliability (Plastic Wire Reinforced) |
| ASTM D 4922-2001 |
测定水中放射性铁的标准试验方法 |
Standard Test Method for Determination of Radioactive Iron in Water |
| ASTM E 2202-2002 |
评定对健康危害用设备发出连续不断噪音测量的标准实施规程 |
Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards |
| ASTM D 6061-2001 |
可呼吸的气雾剂样品性能评价的标准操作规程 |
Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers |
| ASTM F 2171-2002 |
职业急救提供者工作范围定义的标准指南 |
Standard Guide for Defining the Performance of First Aid Providers in Occupational Settings |
| ASTM B 796-2002 |
低合金粉末锻钢部件的非金属杂质含量的标准测试方法 |
Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (P/F) Applications |
| ASTM B 452-2002 |
电子设备用包铜钢导线标准规范 |
Standard Specification for Copper-Clad Steel Wire for Electronic Application |
| ASTM B 857-2002 |
镀覆钢支持的成型钢丝压缩同心铺设铝绞线标准规范 |
Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW) |
| ASTM F 593-2002 |
不锈钢螺栓,六角头螺钉及螺柱标准规范 |
Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs |
| ASTM F 594-2002 |
不锈钢螺母标准规范 |
Standard Specification for Stainless Steel Nuts |
| ASTM F 1470-2002 |
特定的机械性能和功能检测用紧固件抽样的标准指南 |
Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection |
| ASTM D 3641-2002 |
热模塑和挤塑材料的喷射模塑法试样标准规程 |
Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials |
| ASTM D 5083-2002 |
用于直边样品的热增强塑料的拉伸性特性的标准试验方法 |
Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens |
| ASTM D 5202-2002 |
测定化学灌浆土壤的三轴压缩蠕变强度的标准试验方法 |
Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils |
| ASTM D 3652/D 3652M-2001 |
压敏胶带厚度的标准试验方法 |
Standard Test Method for Thickness of Pressure-Sensitive Tapes |
| ASTM G 147-2002 |
自然与人工气候试验用非金属材料的状态调节和处理的标准规程 |
Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests |
| ASTM A 263-2003 |
包铬的不锈钢板标准规范 |
Standard Specification for Stainless Chromium Steel-Clad Plate |
| ASTM E 2133-2003 |
用滚动测斜器测量移动表面纵向和横向断面的标准试验方法 |
Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface |
| ASTM E 2260-2003 |
砖石建筑古迹重嵌灰缝(砖砌体嵌凸缝)的标准指南 |
Standard Guide for Repointing (Tuckpointing) Historic Masonry |
| ASTM D 243-2002 |
规定残渣渗透性标准试验方法 |
Standard Test Method for Residue of Specified Penetration |
| ASTM D 2361-2002 |
煤中氯含量的标准测试方法 |
Standard Test Method for Chlorine in Coal |
| ASTM D 6828-2002 |
切口法测定织物硬挺度的标准试验方法 |
Standard Test Method for Stiffness of Fabric by Blade/Slot Procedure |
| ASTM D 2782-2002 |
润滑液极端压力特性的标准试验法(泰姆肯法) |
Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method) |
| ASTM F 1264-2003 |
髓内固定器械的标准规范和试验方法 |
Standard Specification and Test Methods for Intramedullary Fixation Devices |
| ASTM F 138-2003 |
外科植入物用锻造18铬-14镍-2.5钼不锈钢棒及钢丝的标准规范(UNS S31673) |
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673) |
| ASTM F 139-2003 |
外科植入物用锻造18铬-14镍-2.5钼不锈钢薄板及带材的标准规范(UNS S31673) |
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673) |
| ASTM F 1883-2003 |
美国线规或米制单位导线和电缆规格选择的标准操作规程 |
Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units |
| ASTM A 979/A 979M-2003 |
现场安装于波纹钢结构件中的混凝土铺面和衬里的标准规范 |
Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field |
| ASTM C 113-2002 |
耐火砖的二次加热变化的标准试验方法 |
Standard Test Method for Reheat Change of Refractory Brick |
| ASTM D 6099-2003 |
聚氨酯原材料的标准试验方法:中酸度至高酸度芳香异氰酸酯酸度的测定 |
Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates |
| ASTM D 4378-2003 |
蒸汽和燃气轮机用矿物油在使用过程中监测的标准实施规程 |
Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines |
| ASTM D 6499-2003 |
天然橡胶及其制品中抗原性蛋白质的免疫测量的标准试验方法 |
Standard Test Method for the Immunological Measurement of Antigenic Protein in Natural Rubber and its Products |
| ASTM E 2127a-2001 |
房屋构造中隔墙系统耐拉伸与横向结合荷载用静荷载试验的标准方法 |
Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction |
| ASTM B 172a-2001 |
电导线用成束绞绳铜导线标准规范 |
Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors |
| ASTM D 6020-2000 |
非矿物组合鞣皮剂和鞣皮度计算的标准实施规程 |
Standard Practice for Calculation of (Non-Mineral) Combined Tanning Agents and Degree of Tannage |
| ASTM F 2016-2000 |
确定造船船体构造、装配和涂层质量要求的标准实施规范 |
Standard Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings |
| ASTM F 564-2000 |
骨科用金属U形钉的标准规范和试验方法 |
Standard Specification and Test Methods for Metallic Bone Staples |
| ASTM E 2097-2000 |
测定非金属材料萃取物对生物技术产品安全性影响的标准指南 |
Standard Guide for Determining the Impact of Extractables from Non-Metallic Materials on the Safety of Biotechnology Products |
| ASTM F 2047-2000 |
急救服务志愿者的工作者补偿保险范围标准实施规范 |
Standard Practice for Workers' Compensation Coverage of Emergency Services Volunteers |
| ASTM E 2167-2001 |
石材固结剂的选择和使用标准指南 |
Standard Guide for Selection and Use of Stone Consolidants |
| ASTM D 6756-2002 |
用便携式可视分光光度计测定柴油燃料和加热油的红染料浓度及判断其ASTM颜色的标准试验方法 |
Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer |
| ASTM D 2556a-1993 |
具有切变速率决定其流速性能的胶粘剂的表观粘度的标准试验方法 |
Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties |
| ASTM D 4989a-1990 |
使用平行板塑性计测试屋顶层沥青表观粘度(流动)的标准试验方法 |
Standard Test Method for the Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer |
| ASTM A 866-2001 |
耐磨中碳轴承钢的标准规范 |
Standard Specification for Medium Carbon Anti-Friction Bearing Steel |
| ASTM D 6097a-2001 |
固体介电绝缘材料中有通气孔的水柱提升的相对阻力测定的标准试验方法 |
Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials |
| ASTM D 5208-2001 |
照相级塑料制品的荧光紫外线曝光的标准实施规范 |
Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics |
| ASTM D 2348-2002 |
涂料中砷的标准试验方法 |
Standard Test Method for Arsenic in Paint |
| ASTM F 2154-2001 |
多孔纤维玻璃布面的纤维玻璃吸声板标准规范 |
Standard Specification for Sound-Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced |
| ASTM D 2946-2001 |
石棉和石棉水泥产品的标准术语 |
Standard Terminology for Asbestos and Asbestos-Cement Products |
| ASTM C 1400-2001 |
降低新砌筑墙风化势能的标准指南 |
Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls |
| ASTM F 1857-2001 |
与喷墨打印机及其打印图像相关的标准术语 |
Standard Terminology Relating to Ink Jet Printers and Images Made Therefrom |
| ASTM F 1978-2000 |
用泰伯磨耗试验机测定金属化热喷射涂层抗磨损性的标准试验方法 |
Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
| ASTM E 50-2000 |
金属、矿物和相关材料的化学分析用仪器、试剂和安全措施的标准操作规程 |
Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials |
| ASTM E 314-2000 |
铁矿石中锰含量的标准测试方法 |
Standard Test Methods for Manganese in Iron Ores |
| ASTM E 316-2000 |
用硫化氢还原重铬酸盐滴定法测定锰矿石中铁含量的标准试验方法 |
Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titration |
| ASTM E 1875-2000 |
利用回声共振测试动态杨氏模量、剪切模数和泊松比的标准试验方法 |
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance |
| ASTM A 1013-2000 |
用伏特计、安培计和瓦特计测定可控温度下软磁芯部件的高频(10 kHz-1 MHz)磁芯损耗的标准试验方法 |
Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method |
| ASTM E 1879-2000 |
含酒精饮料敏感度评估的标准指南 |
Standard Guide for Sensory Evaluation of Beverages Containing Alcohol |
| ASTM D 1763-2000 |
环氧树脂的标准规范 |
Standard Specification for Epoxy Resins |
| ASTM D 4868-2000 |
燃烧炉燃料和柴油机燃料燃烧的净热量和总热量估算的标准试验方法 |
Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels |
| ASTM D 3273-2000 |
环境模拟室内涂层表面的抗霉菌生长标准试验方法 |
Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM D 6446-2001 |
评定航空燃料净燃烧热(比能)的标准试验方法 |
Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels |
| ASTM F 1320-2001 |
使用传真热敏式打印机作为测试工具评定热纸的标准试验方法 |
Standard Test Method for Evaluating Thermal Paper Employing a Facsimile Thermal Printer as a Test Instrument |
| ASTM D 4423-2000 |
C4烃中羰基测定的标准试验方法 |
Standard Test Method for Determination of Carbonyls In C4 Hydrocarbons |
| ASTM D 4418-2000 |
燃气轮机用燃料的验收、贮存和搬运的标准操作规程 |
Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines |
| ASTM D 6606-2000 |
用DUCK粘度计测定调色剂和清漆粘度和屈服点的标准试验方法 |
Standard Test Method for Viscosity and Yield of Vehicles and Varnishes by the Duke Viscometer |
| ASTM F 1596-2000 |
温度和相对湿度对薄膜开关影响的标准实施规程 |
Standard Practice for Exposure of Membrane Switches to Temperature and Relative Humidity |
| ASTM F 1595-2000 |
薄膜开关目测检验时观测条件的标准实施规程 |
Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches |
| ASTM F 1560-2000 |
医疗紧急调度管理标准实施规程 |
Standard Practice for Emergency Medical Dispatch Management |
| ASTM D 3487-2000 |
电气装置中用矿物绝缘油标准规范 |
Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus |
| ASTM D 6449-1999 |
织物成形混凝土用细集料混凝土流量的标准试验方法 |
Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method) |
| ASTM D 4094-2000 |
乙烯-丙烯酸酸性共聚物的酸含量的标准试验方法 |
Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers |
| ASTM D 4704-2000 |
皮革撕裂强度和切口撕裂的标准试验方法 |
Standard Test Method for Tearing Strength, Tongue Tear of Leather |
| ASTM D 6595-2000 |
用旋转盘电极原子发射光谱法测定已用润滑油或已用液压流体中杂质的标准试验方法 |
Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry |
| ASTM 14010-1996 |
环境审核的ANSI/ISO指南.总则 |
ANSI/ISO Guidelines for Environmental Auditing--General Principles |
| ASTM 14011-1996 |
环境审核的ANSI/ISO指南.审核程序.环境管理体系的审核 |
ANSI/ISO Guidelines for Environmental Auditing--Audit Procedures--Auditing of Environmental Management Systems |
| ASTM 14012-1996 |
环境审核的ANSI/ISO指南.环境审核员的资格认可标准 |
ANSI/ISO Guidelines for Environmental Auditing--Qualification Criteria for Environmental Auditors |
| ASTM D 2821-2000 |
用扭丝仪测量皮革相对劲度的标准试验方法 |
Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus |
| ASTM F 2056-2000 |
英式足球球门的标准安全和性能规范 |
Standard Safety and Performance Specification for Soccer Goals |
| ASTM B 373-2000 |
电容器用铝箔标准规范 |
Standard Specification for Aluminum Foil for Capacitors |
| ASTM E 2077-2000 |
质谱数据的分析数据互换协议标准规范 |
Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data |
| ASTM E 1562-2000 |
用多毛纲环节动物做剧烈的、慢性的及寿命周期水生动物毒性试验的标准指南 |
Standard Guide for Conducting Acute, Chronic, and Life-Cycle Aquatic Toxicity Tests with Polychaetous Annelids |
| ASTM E 1570-2000 |
计算机断层摄影(CT)检查的标准实施规范 |
Standard Practice for Computed Tomographic (CT) Examination |
| ASTM F 2055-2000 |
测微仪法测定弹性地板砖尺寸和垂直度的标准试验方法 |
Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method |
| ASTM D 6574-2000 |
径向流动法测定土工合成物(平面)液压透射率的试验方法 |
Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow |
| ASTM F 2015-2000 |
搭接法兰管端设备标准规范 |
Standard Specification for Lap Joint Flange Pipe End Applications |
| ASTM E 207-2000 |
与有相同电动势温度性能的标准热电偶相比较测定单个热电偶材料的热电动势的标准试验方法 |
Standard Test Method for Thermal EMF Test of Single Thermoelement Materials By Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties |
| ASTM E 209-2000 |
常规或快速加热及应变升温时金属材料压缩试验的标准实施规程 |
Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates |
| ASTM D 6077-2000 |
皮革梯形撕裂强度的标准试验方法 |
Standard Test Method for Trapezoid Tearing Strength of Leather |
| ASTM E 1709-2000 |
使用便携式后向反射计测量后向反射信号的标准试验方法 |
Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer |
| ASTM F 2042-2000 |
医疗设施中用的硅弹性体、凝胶和泡沫的标准指南.第II部分:交联材料和制造 |
Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication |
| ASTM E 2101-2000 |
用平均型斑点测量减速计测量冬天受污染路面摩擦性能的标准试验方法 |
Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer |
| ASTM B 718-2000 |
镍铬钼钴钨铁硅合金板,薄板和带材的标准规范 |
Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip |
| ASTM D 2094-2000 |
附着力试验用棒和杆试样制备的标准操作规程 |
Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests |
| ASTM F 1993-1999 |
人类探测资源和救生资源的标准分类 |
Standard Classification of Human Search and Rescue Resources |
| ASTM F 1958/F 1958M-1999 |
使用人体模型的电弧暴露法测定服装用不耐火焰材料易燃性的标准试验方法 |
Standard Test Method for Determining the Ignitability of Non-flame-Resistance Materials for Clothing by Electric Arc Exposure Method Using Mannequins |
| ASTM F 2069-2000 |
评价爆破蒸汽探测器的标准操作规程 |
Standard Practice for Evaluation of Explosives Vapor Detectors |
| ASTM D 3682-2000 |
煤利用过程中燃烧残留物中主要和次要元素的标准试验方法 |
Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes |
| ASTM D 3719-2000 |
外用涂漆板上收集污物的标准试验方法 |
Standard Test Method for Quantifying Dirt Collection on Coated Exterior Panels |
| ASTM D 3677-2000 |
用红外线分光光度法鉴别橡胶的标准试验方法 |
Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry |
| ASTM C 1486-2000 |
检验耐化学物质和泥浆扩散的树脂整体地板表面的标准操作规程 |
Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings |
| ASTM D 6567-2000 |
测量泥碳钢筋网光穿透性的标准试验方法 |
Standard Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat (TRM) |
| ASTM D 1523-2000 |
工作温度为90℃的电线和电缆用合成橡胶绝缘材料的标准规范 |
Standard Specification for Synthetic Rubber Insulation for Wire and Cable, 90°C Operation |
| ASTM E 2025-1999 |
门窗元部件和组件耐冲击力评定的标准试验方法 |
Standard Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies |
| ASTM D 6369-1999 |
EPDM屋面层用标准防雨板细节设计标准指南 |
Standard Guide for Design of Standard Flashing Details for EPDM Roof Membranes |
| ASTM B 102-2000 |
铅和锡合金压模铸件的标准规范 |
Standard Specification for Lead- and Tin-Alloy Die Castings |
| ASTM C 50-2000 |
石灰与石灰石制品的取样、样品制备、包装和标记的标准操作规程 |
Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products |
| ASTM D 2346-2000 |
皮革的表面密度的标准试验方法 |
Standard Test Method for Apparent Density of Leather |
| ASTM D 2347-2000 |
测量皮革试样面积的标准试验方法 |
Standard Test Method for Measuring Area of Leather Test Specimens |
| ASTM D 2655-2000 |
额定电压为0到2000V的电线和电缆用交联聚乙烯绝缘材料的标准规范 |
Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V |
| ASTM B 23-2000 |
白色金属轴承合金(商品名称为"巴氏合金")的标准规范 |
Standard Specification for White Metal Bearing Alloys (Known Commercially as "Babbitt Metal") |
| ASTM D 2979-2000 |
用倒置探头机测定胶粘剂压合粘结性的标准试验方法 |
Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine |
| ASTM A 758/A 758M-2000 |
具有改进的切口韧性的对缝焊锻制碳素钢管配件标准规范 |
Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness |
| ASTM A 759-2000 |
起重机用碳钢轨条的标准规范 |
Standard Specification for Carbon Steel Crane Rails |
| ASTM A 772/A 772M-2000 |
正弦电流用材料的交流磁导率的标准试验方法 |
Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current |
| ASTM D 3419-2000 |
热固性化合物在线挤压模注试样的标准操作规程 |
Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds |
| ASTM D 5021-2000 |
热塑性高弹氯化乙烯混合物的标准规范 |
Standard Specification for Thermoplastic Elastomer-Chlorinated Ethylene Alloy (TECEA) |
| ASTM D 4350-2000 |
塑料和填充料的腐蚀指数的标准试验方法 |
Standard Test Method for Corrosivity Index of Plastics and Fillers |
| ASTM D 3300-2000 |
在脉冲条件下石油成因的绝缘油的电介质击穿电压的标准试验方法 |
Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Under Impulse Conditions |
| ASTM F 1031-2000 |
急救医疗技师培训(基础)的标准操作规程 |
Standard Practice for Training the Emergency Medical Technician (Basic) |
| ASTM C 449/C 449M-2000 |
矿物纤维水硬化隔热水泥和精细水泥的标准规范 |
Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement |
| ASTM D 914-2000 |
乙基纤维的标准试验方法 |
Standard Test Methods for Ethylcellulose |
| ASTM D 5224-2000 |
热固模制合成材料的压力模制试样的标准操作规程 |
Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds |
| ASTM D 5274-2000 |
1,3-丁二烯制品分析的标准指南 |
Standard Guide for Analysis of 1,3-Butadiene Product |
| ASTM F 1315-2000 |
密封垫板材料密度的标准测试方法 |
Standard Test Method for Density of a Sheet Gasket Material |
| ASTM C 1246-2000 |
弹性体密封剂凝固后热老化对重量损失、裂开和粉化影响的标准试验方法 |
Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure |
| ASTM C 1282-2000 |
用离心光电沉淀法测定高级陶瓷粒径分布的标准试验方法 |
Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation |
| ASTM D 1831-2000 |
润滑脂滚轧稳定性的标准试验方法 |
Standard Test Method for Roll Stability of Lubricating Grease |
| ASTM D 2110-2000 |
卤化有机溶剂及其混合物水萃取液pH值的标准试验方法 |
Standard Test Method for pH of Water Extractions of Halogenated Organic Solvents and Their Admixtures |
| ASTM F 1229-2000 |
急救医疗服务机上患者医疗护理人员的资格鉴定、教育和训练计划的制定的标准指南 |
Standard Guide for Establishing the Qualifications, Education, and Training of EMS, Air-Medical Patient Care Providers |
| ASTM A 958-2000 |
带拉伸要求,化学要求的类似于标准铸造等级的铸钢,碳和合金的标准规范 |
Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades |
| ASTM D 6430-1999 |
重力法探测地下的标准指南 |
Standard Guide for Using the Gravity Method for Subsurface Investigation |
| ASTM D 6431-1999 |
直流电阻率法探测地下的标准指南 |
Standard Guide for Using the Direct Current Resistivity Method for Subsurface Investigation |
| ASTM D 6432-1999 |
地表地面穿透雷达法探测地下的标准指南 |
Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation |
| ASTM E 2038-1999 |
介电分析仪温度校准的标准试验方法 |
Standard Test Method for Temperature Calibration of Dielectric Analyzers |
| ASTM D 6465-1999 |
航空航天和通用胶粘剂和密封剂选择的标准指南 |
Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
| ASTM F 756-2000 |
材料的溶血特性评定的标准规程 |
Standard Practice for Assessment of Hemolytic Properties of Materials |
| ASTM D 6182-2000 |
皮革成品的粘性和柔性的标准试验方法 |
Standard Test Method for Flexibility and Adhesion of Finish on Leather |
| ASTM D 5033-2000 |
有关再循环和再循环塑料使用的ASTM标准的制定标准指南 |
Standard Guide for Development of ASTM Standards Relating to Recycling and Use of Recycled Plastics |
| ASTM A 929/A 929M-2001 |
波纹钢管用的经热浸处理的金属镀覆薄钢板标准规范 |
Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe |
| ASTM A 67-2000 |
热加工的低碳钢和高碳钢垫板的标准规范 |
Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked |
| ASTM D 5990-2000 |
聚合注塑和挤压成型材料的标准分类系统 |
Standard Classification System for Polyketone Injection Molding and Extrusion Materials (PK) |
| ASTM D 5433-2000 |
公共机构和家用毛巾制品的标准性能规范 |
Standard Performance Specification for Towel Products for Institutional and Household Use |
| ASTM D 5469-2000 |
新喷涂的聚氨酯泡沫和覆层屋顶系统应用的标准指南 |
Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems |
| ASTM C 688-2000 |
水凝水泥用有效添加剂标准规范 |
Standard Specification for Functional Additions for Use in Hydraulic Cements |
| ASTM F 1250-2000 |
固定式训练用自行车的消费者安全规范 |
Standard Safety Specification for Stationary Exercise Bicycles |
| ASTM B 440-2000 |
镉的标准规范 |
Standard Specification for Cadmium |
| ASTM D 899-2000 |
单位面积涂用液体胶粘剂重量的标准试验方法 |
Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive |
| ASTM D 1018-2000 |
石油馏分中氢含量的标准试验方法 |
Standard Test Method for Hydrogen In Petroleum Fractions |
| ASTM D 3076-2000 |
气溶胶容器外部卷合阀的有效卷合度的标准试验方法 |
Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers |
| ASTM D 1912-2000 |
家具革耐冻裂性的标准试验方法 |
Standard Test Method for Cold-Crack Resistance of Upholstery Leather |
| ASTM D 6183-2000 |
皮革成品胶粘性的标准试验方法 |
Standard Test Method for Tackiness of Finish on Leather |
| ASTM D 5728-2000 |
联运和单一方式运输中货物安全的标准实施规程 |
Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport |
| ASTM D 5757-2000 |
用气流测定粉末催化剂的磨损和其特性表征的标准试验方法 |
Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets |
| ASTM D 4907-2000 |
皮革精制中硝化纤维素的标准试验方法 |
Standard Test Method for Nitrocellulose in Finish on Leather |
| ASTM D 6575-2000 |
测定用做草地增强垫层的土工合成物硬挺度的标准试验方法 |
Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs) |
| ASTM E 2105-2000 |
联用红外线分析的热重分析通用技术的标准实施规范 |
Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR) |
| ASTM A 1-2000 |
碳素钢丁字轨的标准规范 |
Standard Specification for Carbon Steel Tee Rails |
| ASTM D 6568-2000 |
水样品可追踪化学分析的计划、实施和报告的标准指南 |
Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples |
| ASTM D 6581-2000 |
化学悬浮离子色谱法测定饮用水中溴酸盐、亚溴酸盐、氯酸盐和亚氯酸盐的标准试验方法 |
Standard Test Method for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Chemically Suppressed Ion Chromatography |
| ASTM F 2046-2000 |
不同转速计标准规范 |
Standard Specification for Tachometers, Various |
| ASTM C 1338-2000 |
测量隔热材料和饰面耐霉性的标准试验方法 |
Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings |
| ASTM F 1685-2000 |
空气或氮气系统用减压歧管的标准规范 |
Standard Specification for Pressure-Reducing Manifolds for Air or Nitrogen Systems |
| ASTM D 6546-2000 |
工业液压液用弹性密封件能力测定的标准试验方法和建议极限值 |
Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications |
| ASTM E 1751-2000 |
非字符表示热电偶用温度电动势(EMF)表的标准指南 |
Standard Guide for Temperature Electromotive Force (emf) Tables for Non-Letter Designated Thermocouple Combinations |
| ASTM F 513-2000 |
水球运动员眼睛和面部防护设备的标准安全规范 |
Standard Safety Specification for Eye and Face Protective Equipment for Hockey Players |
| ASTM F 1761-2000 |
圆形磁射极板磁力线通过量的标准试验方法 |
Standard Test Method for Pass Through Flux of Circular Magnetic Sputtering Targets |
| ASTM B 724-2000 |
用新式轻便非卡尺型仪器测量铝合金压痕硬度的标准试验方法 |
Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument |
| ASTM C 317/C 317M-2000 |
石膏混凝土标准规范 |
Standard Specification for Gypsum Concrete |
| ASTM C 318/C 318M-2000 |
石膏模板的标准规范 |
Standard Specification for Gypsum Formboard |
| ASTM B 909-2000 |
非应力消除铝制品的平面应力断裂强度试验的标准导则 |
Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products |
| ASTM D 6554-2000 |
纯棉劳动布织物的标准性能规范 |
Standard Performance Specification for 100 % Cotton Denim Fabrics |
| ASTM D 6285-1999 |
定位废弃井的标准指南 |
Standard Guide for Locating Abandoned Wells |
| ASTM D 1813-2000 |
皮件试样厚度测量的标准试验方法 |
Standard Test Method for Measuring Thickness of Leather Test Specimens |
| ASTM D 1815-2000 |
皮革吸水率(静态)的标准试验方法 |
Standard Test Method for Water Absorption (Static) of Vegetable Tanned Leather |
| ASTM D 2207-2000 |
用球法测定皮革抗破碎强度的标准试验方法 |
Standard Test Method for Bursting Strength of Leather by the Ball Method |
| ASTM E 2106-2000 |
液相色谱-红外分析(LC/IR)和尺寸排阻色谱-红外分析(SEC/IR)通用技术的标准实施规范 |
Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses |
| ASTM C 1199-2000 |
隔热箱法测定主窗设计系统的稳态热传递系数的标准试验方法 |
Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods |
| ASTM D 43-2000 |
屋顶、防潮及防水材料用杂酚油底漆的标准规范 |
Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing |
| ASTM D 3465-2000 |
用气相色谱法分析增塑剂单体纯净度的标准试验方法 |
Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography |
| ASTM D 2322-2000 |
铬鞣白色鞋帮皮模拟透气性的标准试验方法 |
Standard Test Method for Resistance of Shoe Upper Leather to Artificial Perspiration |
| ASTM D 1913-2000 |
服装革抗湿性的标准试验方法(喷雾法) |
Standard Test Method for Resistance to Wetting of Garment-Type Leathers (Spray Test) |
| ASTM D 2096-2000 |
皮革洗涤时的色牢度和颜色转移性的标准测试方法 |
Standard Test Method for Colorfastness and Transfer of Color in the Washing of Leather |
| ASTM D 2209-2000 |
皮革抗拉强度的标准试验方法 |
Standard Test Method for Tensile Strength of Leather |
| ASTM D 4377-2000 |
卡耳.费歇尔电势滴定法测定原油中含水量的标准试验方法 |
Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration |
| ASTM D 4430-2000 |
气象测量运算可比性测定的标准实施规程 |
Standard Practice for Determining the Operational Comparability of Meteorological Measurements |
| ASTM D 4495-2000 |
落锤法测试硬质聚氯乙烯型材耐冲击性的标准试验方法 |
Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight |
| ASTM D 4705-2000 |
皮革双孔缝合时抗扯裂强度的标准试验方法 |
Standard Test Method for Stitch Tear Strength of Leather, Double Hole |
| ASTM D 1611-2000 |
皮革与金属接触时产生腐蚀的标准试验方法 |
Standard Test Method for Corrosion Produced by Leather in Contact with Metal |
| ASTM D 2208-2000 |
用抓取法测定皮革抗断裂强度的标准试验方法 |
Standard Test Method for Breaking Strength of Leather by the Grab Method |
| ASTM D 2210-2000 |
用莫林法测定皮革纹裂和延展度的标准试验方法 |
Standard Test Method for Grain Crack and Extension of Leather by the Mullen Test |
| ASTM D 2211-2000 |
皮革的延伸性标准试验方法 |
Standard Test Method for Elongation of Leather |
| ASTM D 2212-2000 |
皮革裂缝抗扯性标准试验方法 |
Standard Test Method for Slit Tear Resistance of Leather |
| ASTM D 2213-2000 |
皮革压缩性的标准试验方法 |
Standard Test Method for Compressibility of Leather |
| ASTM D 2745-2000 |
反射测量法测定白色颜料相对着色力的标准试验方法 |
Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements |
| ASTM C 1198-2001 |
声谐振测定动态扬氏模量、剪切模量和泊松比的标准试验方法 |
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance |
| ASTM D 4056-2001 |
评定水在烃和脂肪酯润滑剂中溶解度的标准试验方法 |
Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants |
| ASTM F 1510-2001 |
商业船用旋转式正排量泵标准规范 |
Standard Specification for Rotary Positive Displacement Pumps, Commercial Ships Use |
| ASTM A 1001-2001 |
重型型钢中高强度钢铸件的标准规范 |
Standard Specification for High Strength Steel Castings in Heavy Sections |
| ASTM F 1898-2001 |
婴幼儿用非机动轮式车辆头盔的标准规范 |
Standard Specification for Helmets for Non-Motorized Wheeled Vehicle Used by Infants and Toddlers |
| ASTM D 1579-2001 |
苯酚、间苯二酚和三聚氰胺胶粘剂中填料含量的标准测试方法 |
Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives |
| ASTM D 1876-2001 |
胶粘剂的抗剥离性的标准试验方法(T型剥离试验) |
Standard Test Method for Peel Resistance of Adhesives (T-Peel Test) |
| ASTM E 242-2001 |
在某些参数改变时射线照相图像外观用标准参考射线照相 |
Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters Are Changed |
| ASTM E 2157-2001 |
用环道计测量路面宏观结构性能的标准试验方法 |
Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter |
| ASTM D 6197-1999 |
分类和计数电子试验中细纱的缺陷的标准试验方法 |
Standard Test Method for Classifying and Counting Faults in Spun Yarns in Electronic Tests |
| ASTM C 429-2001 |
玻璃制造用原料的筛析标准试验方法 |
Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture |
| ASTM E 273-2001 |
焊接管道焊接区域的超声波检验标准实施规程 |
Standard Practice for Ultrasonic Examination of the Weld Zone of Welded Pipe and Tubing |
| ASTM E 2159-2001 |
评审员/审核员或技术专家的选择、委派和监控的标准指南 |
Standard Guide for Selection, Assignment, and Monitoring of Persons To Be Utilized as Assessors/Auditors or Technical Experts |
| ASTM F 782-2001 |
船用家具门的标准规范 |
Standard Specification for Doors, Furniture, Marine |
| ASTM F 1178-2001 |
金属连接件和家具烘烤涂漆系统的性能用标准规范 |
Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture |
| ASTM D 5598-2001 |
对汽车无铅火花点火发动机油进行电子口燃油喷口结污评定的标准试验方法 |
Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling |
| ASTM D 5621-2001 |
液压流体的声波剪切稳定性标准试验方法 |
Standard Test Method for Sonic Shear Stability of Hydraulic Fluid |
| ASTM D 4635-2001 |
通用和包装用低密度聚乙烯薄膜标准规范 |
Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications |
| ASTM E 390-2001 |
钢熔焊连接用标准参考射线照片 |
Standard Reference Radiographs for Steel Fusion Welds |
| ASTM E 1173-2001 |
评定手术前和导管插入术前或注射前皮肤处理的标准试验方法 |
Standard Test Method of a Evaluation of a Preoperative, Precatheterization, or Preinjection Skin Preparations |
| ASTM E 2153-2001 |
荧光颜色评价双光谱光度学数据获得的标准实施规程 |
Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color |
| ASTM B 121/B 121M-2001 |
含铅黄铜中厚板、薄板、带材和轧制棒材标准规范 |
Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar |
| ASTM D 6648-2001 |
使用弯曲束状流变仪的沥青粘结剂的柔性蠕变硬度测定的标准试验方法 |
Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) |
| ASTM D 4692-2001 |
反渗透用硫酸盐类换算盐分(CaSO4,SrSO4和BaSO4)计算和校正的标准实施规程 |
Standard Practice for Calculation and Adjustment of Sulfate Scaling Salts (CaSO4, SrSO4, and BaSO4) for Reverse Osmosis and Nanofiltration |
| ASTM D 5031-2001 |
使用封闭碳弧光灯曝露仪对涂料及有关涂层进行试验的标准实施规程 |
Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings |
| ASTM D 5227-2001 |
测量聚烯烃可提取正乙烷含量的标准试验方法 |
Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins |
| ASTM B 592-2001 |
铜锌铝钴合金、铜锌锡铁板、薄板、带材及轧制的棒材标准规范 |
Standard Specification for Copper-Zinc-aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM D 632-2001 |
氯化钠标准规范 |
Standard Specification for Sodium Chloride |
| ASTM D 822-2001 |
用经过过滤的明光碳弧曝光装置测定涂料及相关涂层的标准实施规程 |
Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
| ASTM D 2997-2001 |
离心铸造"纤维玻璃"(玻璃纤维增强的热固性树脂)管的标准规范 |
Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ASTM G 60-2001 |
进行循环湿度试验的标准实施规程 |
Standard Practice for Conducting Cyclic Humidity Exposures |
| ASTM C 1496-2001 |
外部石墙和表面的评价和维护标准指南 |
Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades |
| ASTM D 6689-2001 |
同样试验组织内多层工作台最优控制和报告试验方法不确定性的标准指南 |
Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization |
| ASTM C 1503-2001 |
镀银平镜的标准规范 |
Standard Specification for Silvered Flat Glass Mirror |
