| 标准号 |
中文名 |
英文名 |
| ASTM F 1823-1997 |
水上救援人员漂浮装置的标准指南 |
Standard Guide for Water Rescue Personal Flotation Device (PFD) |
| ASTM D 6326-1998 |
U.S.系列等动力悬浮-沉淀取样器最大接转速率比率和深度的选择的标准操作规程 |
Standard Practice for The Selection of Maximum Transit-Rate Ratios and Depths for the U.S. Series of Isokinetic Suspended-Sediment Samplers |
| ASTM F 1143-1998 |
防油防水隆起的螺栓连接检查孔盖组件标准规范 |
Standard Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight |
| ASTM F 1270-1997 |
急救站名表的编制和定位的标准实施规程 |
Standard Practice for Preparing and Locating Emergency Muster Lists |
| ASTM E 1901-1997 |
用触点脉冲回声直束法探测和评价不连续性的标准指南 |
Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods |
| ASTM E 1889-1997 |
实施路面管理的标准指南 |
Standard Guide for Pavement Management Implementation |
| ASTM D 5134-1998 |
用毛细管气相色谱法详细分析石脑油穿透n壬烷的标准试验方法 |
Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography |
| ASTM F 965-1999 |
气管插管的刚性喉镜的规格-喉镜手柄的钩形配件和带灯的刀片 |
Standard Specification for Rigid Laryngoscopes for Tracheal Intubation-Hook-On Fittings for Laryngoscope Handles and Blades with Lamps |
| ASTM D 6165-1997 |
涂料,油墨和相关材料的气味识别,检测,比较的标准指南 |
Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials |
| ASTM B 368-1997 |
铜加速的醋酸腐蚀盐喷雾试验(CASS试验)的标准试验方法 |
Standard Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) |
| ASTM B 365-1998 |
钽及钽合金杆材和线材标准规范 |
Standard Specification for Tantalum and Tantalum Alloy Rod and Wire |
| ASTM B 364-1996 |
钽及钽合金铸锭标准规范 |
Standard Specification for Tantalum and Tantalum Alloy Ingots |
| ASTM D 2122-1998 |
测定热塑塑料管和配件尺寸的试验方法 |
Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings |
| ASTM D 2014-1997 |
用底部加热炉对煤的膨胀性和收缩性测试的试验方法 |
Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven |
| ASTM G 69-1997 |
测定铝合金潜在腐蚀性 |
Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys |
| ASTM G 59-1997 |
动电势极化电阻测量的标准试验方法 |
Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements |
| ASTM F 1783-1997 |
Ⅱ级冰救生器性能的标准指南 |
Standard Guide for Performance of an Ice Rescuer-Level II |
| ASTM D 6027-1996 |
土工技术用途的校正衬垫代替换能器的标准试验方法 |
Standard Test Method for Calibrating Linear Displacement Transducers for Geotechnical Purposes |
| ASTM D 6238-1998 |
水中总氧要求的标准试验方法 |
Standard Test Method for Total Oxygen Demand in Water |
| ASTM F 1880-1998 |
测定射箭弓射出百分比的标准试验方法 |
Standard Test Method for the Determination of Percent of Let-Off for Archery Bows |
| ASTM D 3851-1997 |
氨基甲酸乙酯微孔鞋底材料 |
Standard Specification for Urethane Microcellular Shoe Soling Materials |
| ASTM E 1923-1997 |
陆上和湿地植被取样的标准指南 |
Standard Guide for Sampling Terrestrial and Wetlands Vegetation |
| ASTM E 1944-1998 |
描述和测量实验室傅里叶变换近红外线(FT-NIR)光谱分析仪性能的标准操作规程:零级和一级试验 |
Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests |
| ASTM D 6311-1998 |
与废物管理活动有关的环境数据产生的标准指南:取样设计的选择和优化 |
Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design |
| ASTM C 942-1999 |
在实验室内测定预置集料混凝土的压缩强度的试验方法 |
Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory |
| ASTM D 3401-1997 |
卤化有机溶剂及其掺和物中的水分的标准试验方法 |
Standard Test Methods for Water in Halogenated Organic Solvents and Their Admixtures |
| ASTM D 3291-1997 |
压力作用下聚氯乙烯塑料中增塑剂的兼容性 |
Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression |
| ASTM D 6114-1997 |
沥青橡胶粘结剂的标准规范 |
Standard Specification for Asphalt-Rubber Binder |
| ASTM F 996-1998 |
利用亚阈值安伏特性测定由于氧化空穴和界面态产生的电离辐射感应金属氧化物半导体场效应晶体管阈电压偏移分 |
Standard Test Method for Separating an Ionizing Radiation-Induced MOSFET Threshold Voltage Shift Into Components Due to Oxide Trapped Holes and Interface States Using the Subthreshold Current-Voltage Characteristics |
| ASTM F 995-1997 |
应用两种成分干影剂评价复印机调色剂的试验方法 |
Standard Practice for Estimating Toner Usage in Copiers Utilizing Dry Two-Component Developer |
| ASTM D 6145-1997 |
检测分水界沉积的标准指南 |
Standard Guide for Monitoring Sediment in Watersheds |
| ASTM F 1633-1997 |
地面搜索技术的标准指南 |
Standard Guide for Techniques in Land Search |
| ASTM C 1076-1997 |
核纯级氧化铪丸 |
Nuclear Grade Hafnium Oxide Pellets |
| ASTM C 1120-1998 |
石棉清洗试验方法 |
Test Method for Wash Test of Asbestos |
| ASTM D 3340-1998 |
用火焰光度计策动润滑油脂中锂和钠的试验方法 |
Standard Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer |
| ASTM D 6466-1999 |
用Sirolan激光扫描纤维直径分析仪测定羊毛和其它动物纤维直径的标准试验方法 |
Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser |
| ASTM E 1486-1998 |
利用波纹度、行车轨迹和水平度准则测定地板公差的标准试验方法 |
Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria |
| ASTM D 2764-1999 |
焦油和硬沥青中二甲基甲酰胺不溶物(DMF-I)含量的标准试验方法 |
Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch |
| ASTM C 27-1998 |
耐火土及高矾土耐火砖的标准分类 |
Standard Classification of Fireclay and High-Alumina Refractory Brick |
| ASTM C 1080-1998 |
冷却塔用除填料以外的石棉水泥制品 |
Asbestos-Cement Products Other Than Fill for Cooling Towers |
| ASTM E 1282-1998 |
规定金属及其合金的化学成分并选择取样的实际操作与定量分析方法 |
Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials |
| ASTM B 162-1999 |
镍板、薄板和带材标准规范 |
Standard Specification for Nickel Plate, Sheet, and Strip |
| ASTM E 1906-1997 |
产品认证体系机构的一般要求的标准指南 |
Standard Guide for General Requirements for Bodies Operating Product Certification Systems |
| ASTM D 6280-1998 |
磷酸锌颜料的规范 |
Specification for Zinc Phosphate Pigments |
| ASTM F 1830-1997 |
评价实验室血泵用血液的选择的标准操作规程 |
Standard Practice for Selection of Blood for In Vitro Evaluation of Blood Pumps |
| ASTM F 312-1997 |
膜滤器上航空流体中颗粒微观大小的测定及计数 |
Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters |
| ASTM F 311-1997 |
用膜滤器进行粒状污染物分析用航空航天流体样品的处理 |
Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters |
| ASTM E 1426-1998 |
残余应力X-射线缺陷测量效果弹性参数测定的试验方法 |
Standard Test Method for Determining the Effective Elastic Parameter for X-Ray Diffraction Measurements of Residual Stress |
| ASTM D 6458-1999 |
尺寸为8至14和8至20的男孩身体测量用标准表 |
Standard Tables of Body Measurements for Boys, Sizes 8 to 14 Slim and 8 to 20 Regular |
| ASTM F 1991-1999 |
中式炉灶(镬)性能的标准试验方法 |
Standard Test Method for Performance of Chinese (Wok) Ranges |
| ASTM E 923-1997 |
可重复使用的玻璃韦斯特格伦氏管用标准规范 |
Standard Specification for Glass Westergen Tube, Reusable |
| ASTM E 1405-1998 |
实验室玻璃蒸馏烧瓶 |
Standard Specification for Laboratory Glass Distillation Flasks |
| ASTM E 1403-1997 |
实验室玻璃烧瓶 |
Standard Specification for Laboratory Glass Boiling Flasks |
| ASTM E 1399-1997 |
建筑连接系统最小和最大连接宽度的测量和循环运动的标准试验方法 |
Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems |
| ASTM E 617-1997 |
实验室砝码和精密质量标准用标准规范 |
Standard Specification for Laboratory Weights And Precision Mass Standards |
| ASTM D 6250-1998 |
在废物管理决策中主浓度静态试验用决策点和可信限度偏差的标准操作规程 |
Standard Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions |
| ASTM A 726/A 726M-1998 |
半加工的冷压磁性优质叠层钢板 |
Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types |
| ASTM D 3198-1997 |
螺纹或突耳型闭塞物的应用及移动扭矩的试验方法 |
Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures |
| ASTM E 1264-1998 |
吸音顶棚产品的分类 |
Standard Classification for Acoustical Ceiling Products |
| ASTM E 690-1998 |
无磁热交换管的现场电磁(涡电流)检验 |
Standard Practice for In Situ Electromagnetic (Eddy-Current) Examination of Nonmagnetic Heat Exchanger Tubes |
| ASTM D 5804-1997 |
零档上张力强度的标准试验方法("干零档张力") |
Standard Test Methods for Zero-Span Tensile Strength ("Dry Zero-Span Tensile") |
| ASTM D 5803-1997 |
零档上张力强度的标准试验方法("湿零档张力") |
Standard Test Method for Tensile Strength at Zero-Span ("Wet Zero-Span Tensile") |
| ASTM F 1831-1997 |
颅骨牵引钳和晕轮外部脊椎固定装置的标准规范 |
Standard Specification for Cranial Traction Tongs and Halo External Spinal Immobilization Devices |
| ASTM F 1828-1997 |
输尿管展伸的标准规范 |
Standard Specification for Ureteral Stents |
| ASTM F 1820-1997 |
测定模数碟状体设备轴向拆解力的标准试验方法 |
Standard Test Method for Determining the Axial Disassembly Force of a Modular Acetabular Device |
| ASTM D 6387-1999 |
通过毛细孔气相色谱对松节油和相关的萜烯产品的组成的标准试验方法 |
Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography |
| ASTM F 526-1997 |
测定用于线性加速器脉冲发射效应试验的剂量的试验方法 |
Standard Test Method for Measuring Dose for Use in Linear Accelerator Pulsed Radiation Effects Tests |
| ASTM F 78-1997 |
使用副标准件校准氦检漏仪的试验方法 |
Standard Test Method for Calibration of Helium Leak Detectors by Use of Secondary Standards |
| ASTM F 36-1999 |
垫片材料的压缩性及回弹性的标准试验方法 |
Standard Test Method for Compressibility and Recovery of Gasket Materials |
| ASTM F 29-1997 |
玻璃与金属密封装置用杜美丝 |
Standard Specification for Dumet Wire for Glass-to-Metal Seal Applications |
| ASTM E 1999-1999 |
用光辐射光谱测定法进行铸铁分析的标准试验方法 |
Standard Test Method for Analysis of Cast Iron Using Optical Emission Spectrometry |
| ASTM E 2001-1998 |
金属和非金属部件探伤检验用的共振超声谱法的标准指南 |
Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-Metallic Parts |
| ASTM F 483-1998 |
飞行器保养用化学药品的完全浸没腐蚀试验方法 |
Standard Test Method for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals |
| ASTM E 1563-1998 |
用海胆纲胚胎做静态剧毒试验的标准指南 |
Standard Guide for Conducting Static Acute Toxicity Tests with Echinoid Embryos |
| ASTM F 1965-1999 |
台式炉性能的标准试验方法 |
Standard Test Method for Performance of Deck Ovens |
| ASTM D 4532-1997 |
工厂场所大气中可吸入粉尘的标准试验方法 |
Standard Test Method for Respirable Dust in Workplace Atmospheres |
| ASTM D 4527-1999 |
炭黑的标准试验方法.溶剂可萃取物 |
Standard Test Methods for Carbon Black - Solvent Extractables |
| ASTM C 1234-1998 |
痕量元素测定用高压、高温分解法制备油及含油废物样品的标准实施规程 |
Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations |
| ASTM D 2921-1998 |
木制品中的防水剂与防腐剂的定量试验的试验方法 |
Test Method for Qualitative Tests for the Presence of Water Repellents and Preservatives in Wood Products |
| ASTM D 2918-1999 |
受撕裂应力的胶粘接头耐用性的标准试验方法 |
Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel |
| ASTM D 2851-1998 |
液态光学胶粘剂 |
Liquid Optical Adhesive |
| ASTM D 6345-1998 |
空气中挥发性有机化合物活动性的集中的取样方法选择的标准指南 |
Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air |
| ASTM D 3588-1998 |
气体燃料热值及比重和相对密度的计算 |
Calculating Heat Value, Compressibility Factor and Relative Density (Specific Gravity) of Gaseous Fuels |
| ASTM C 1042-1999 |
使用斜剪切法测定同混凝土一起使用的乳胶粘着强度的测试方法 |
Test Method for Bond Strength of Latex Systems Used with Concrete by Slant Shear |
| ASTM C 1008-1999 |
烧结二氧化铀钚丸快速反应堆燃料 |
Sintered (Uranium-Plutonium) Dioxide Pellets - Fast Reactor Fuel |
| ASTM D 4470-1997 |
静电起电的标准试验方法 |
Standard Test Method for Static Electrification |
| ASTM C 400-1998 |
中和废酸用生石灰和熟石灰的标准试验方法 |
Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid |
| ASTM C 399-1998 |
耐化学腐蚀树脂灰浆的使用的标准实施规程 |
Standard Practice for Use of Chemical-Resistant Resin Mortars |
| ASTM E 667-1998 |
温度计(自动记录最高温度水银玻璃温度计) |
Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers |
| ASTM C 398-1998 |
耐化学腐蚀的水硬性水泥灰浆的使用的标准实施规程 |
Standard Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry |
| ASTM D 5170-1998 |
钩状和环状连接紧固件的坯料剥离强度的标准试验方法("T"方法) |
Standard Test Method for Peel Strength ("T" Method) of Hook and Loop Touch Fasteners |
| ASTM D 5166-1997 |
使用微波炉的加胶载色剂样品的实验室制备的标准操作规程 |
Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven |
| ASTM E 1862-1997 |
用红外成像辐射仪测量和均衡反射温度的标准试验方法 |
Standard Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers |
| ASTM D 5059-1998 |
X射线分光光度法测量汽油中铅含量的标准试验方法 |
Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy |
| ASTM C 1409-1998 |
测量和估算绝缘管及元件数量的标准导则 |
Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components |
| ASTM D 3472-1997 |
将防止儿童开启的IA型关闭器反向棘爪扭矩的试验方法 |
Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures |
| ASTM D 3469-1997 |
防止儿童开启的可脱开的IIA型突耳状闭锁器垂直力测定的试验方法 |
Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures |
| ASTM D 6346-1998 |
通过家庭有害废物处理收集的验收,隔离和包装材料的标准指南 |
Standard Guide for Accepting, Segregating and Packaging Materials Collected Through Household Hazardous Waste Programs |
| ASTM D 3585-1998 |
ASTM参考冷却剂 |
Standard Specification for ASTM Reference Fluid for Coolant Tests |
| ASTM D 6351-1999 |
测定液压液低温流动性和表面特性的标准试验方法 |
Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids |
| ASTM D 3685/D 3685M-1998 |
烟道气中微型颗粒的抽样和定义的试验方法 |
Test Methods for Sampling and Determination of Particulate Matter in Stack Gases |
| ASTM C 1342-1996 |
通量熔融样品分部的标准规程 |
Standard Practice for Flux Fusion Sample Distribution |
| ASTM C 1352-1996 |
方石弯曲弹性模量的标准试验方法 |
Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone |
| ASTM D 4265-1998 |
家用洗衣机去污性能的评定 |
Evaluating Stain Removal Performance in Home Laundering |
| ASTM E 1911-1998 |
用动摩擦试验器观测路面摩擦特性的标准试验方法 |
Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester |
| ASTM D 6177-1997 |
由基床排放的挥发性有机化学药品的排放层面测定的标准操作规程 |
Standard Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets |
| ASTM D 6389-1999 |
评价土工织物耐液体化学性试验的标准操作规程 |
Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids |
| ASTM D 4559-1999 |
硅液中挥发性物质的标准试验方法 |
Standard Test Method for Volatile Matter in Silicone Fluid |
| ASTM D 6401-1999 |
植物性单宁材料提取中测定单宁和非单宁的标准试验方法 |
Standard Test Method for Determining Non-Tannins and Tannin in Extracts of Vegetable Tanning Materials |
| ASTM E 1989-1998 |
实验室设备控制接口的标准规范 |
Standard Specification for Laboratory Equipment Control Interface (LECIS) |
| ASTM D 6331-1998 |
低浓度下来源于固定源的颗粒物质质量测定的标准试验方法(手工重量计法) |
Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method) |
| ASTM D 4105-1996 |
改进的非平衡法测定非越流性有侧限的蓄水层过滤系数及储存系数的标准试验方法(分析程序) |
Standard Test Method (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method |
| ASTM D 6152-1999 |
用于屋顶的SEBS改良清理沥青的标准规范 |
Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing |
| ASTM D 4166-1999 |
用数字磁化强度测试仪测量非磁性材料厚度的标准试验方法 |
Standard Test Method for Measurement of Thickness of Nonmagnetic Materials by Means of a Digital Magnetic Intensity Instrument |
| ASTM D 2793-1999 |
木板制底材上有机涂层抗粘连性的标准试验方法 |
Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates |
| ASTM D 5113-1997 |
测定硬质多孔泡沫塑料的胶粘剂化学浸蚀的标准试验方法 |
Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam |
| ASTM D 5112-1998 |
产品振动试验的标准试验方法(水平方向正弦运动) |
Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products |
| ASTM D 5110-1998 |
使用紫外光度法进行臭氧转变标准认证和臭氧监测器校准的标准实施规范 |
Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry |
| ASTM E 1852-1996 |
用电热原子吸收光谱测定法测定碳和低合金钢中锑低含量的标准试验方法 |
Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Electrothermal Atomic Absorption Spectrometry |
| ASTM F 1142-1998 |
防油防水半嵌入螺栓连接检查孔盖组件标准规范 |
Standard Specification for Manhole Cover Assembly Bolted, Semi-Flush, Oiltight and Watertight |
| ASTM F 1138-1998 |
机械连接挡溅板标准规范 |
Standard Specification for Spray Shields for Mechanical Joints |
| ASTM D 6034-1996 |
通过一连续比率的泵试验对限制性含水层内生产井效率测定的标准试验方法 |
Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test |
| ASTM E 825-1998 |
人体温度周期性测量用相位变化型易处置体温计的标准规范 |
Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature |
| ASTM D 6370-1999 |
用热重力法对橡胶组成分析的标准试验方法 |
Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA) |
| ASTM D 6374-1999 |
测定绿色石油焦石英熔化过程中挥发物质的标准试验方法 |
Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure |
| ASTM D 6362-1998 |
水分析参考材料合格性的标准操作规程 |
Standard Practice for Certificates of Reference Materials for Water Analysis |
| ASTM D 6363-1998 |
通过过氧化物酶荧光法对大气水样品中过氧化氢和结合的有机过氧化物测定的标准试验方法 |
Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method |
| ASTM D 6361-1998 |
清洁剂的选择与处理用标准指南 |
Standard Guide for Selecting Cleaning Agents and Processes |
| ASTM D 6342-1998 |
聚氨基甲酸乙酯原料的标准实施规范:利用近红外谱法测定多元醇中的羟基值 |
Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy |
| ASTM D 6341-1998 |
测定-30到140°F(-34.4到60℃)之间塑料制材和型材线热膨胀系数的标准试验方法 |
Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between -30 and 140°F (-34.4 and 60°C) |
| ASTM D 6333-1998 |
地板上可去除的杀虫剂残留物收集的标准操作规程 |
Standard Practice for Collection of Dislodgeable Pesticide Residues from Floors |
| ASTM F 1949-1999 |
EMS陆上车辆用医用氧输送系统的标准规范 |
Standard Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles |
| ASTM D 3607-1997 |
汽提法从用过的发动机机油中脱除挥发性杂质的试验方法 |
Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping |
| ASTM D 5775-1995 |
SBR中合成来源的苯乙烯橡胶的标准试验方法 |
Standard Test Method for Rubber from Synthetic Sources-Bound Styrene in SBR |
| ASTM D 5897-1996 |
电位滴定转换法测定纤维素酯中羟基百分率的标准试验方法 |
Standard Test Method for Determination of Percent Hydroxyl on Cellulose Esters by Potentiometric Titration-Alternative Method |
| ASTM D 5082-1999 |
机械固定聚氯乙烯屋顶板应用的标准实施规程 |
Standard Practice for Application of Mechanically Attached Poly(Vinyl Chloride) Sheet Roofing |
| ASTM B 896-1999 |
评定电导体材料连接特性的标准试验方法 |
Standard Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials |
| ASTM D 4565-1999 |
远程通信电线和电缆用绝缘体和套管的物理和环境性能特性的标准试验方法 |
Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable |
| ASTM F 448-1999 |
测量稳态原始光电流的标准试验方法 |
Test Method for Measuring Steady-State Primary Photocurrent |
| ASTM A 998/A 998M-1998 |
下水道和其他用途工厂制波纹钢管中配件用钢筋的结构设计标准实施规范 |
Standard Practice for Structural Design of Reinforcements for Fittings in Factory - Made Corrugated Steel Pipe for Sewers and Other Applications |
| ASTM D 4167-1997 |
纤维增强的塑料风扇和风机 |
Standard Specification for Fiber-Reinforced Plastic Fans and Blowers |
| ASTM E 1894-1997 |
选择脉冲X射线源用的剂量测定系统的标准指南 |
Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources |
| ASTM F 1943-1998 |
测定热质量传递带状产品的动态导热性的标准试验方法.ATLANTEK方法 |
Standard Test Method for Determining the Dynamic Thermal Response of Thermal Mass Transfer Ribbon Products - Atlantek Method |
| ASTM D 4221-1999 |
用双倍流体比重计测定粘土的分散特性的试验方法 |
Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer |
| ASTM F 1938-1998 |
可移动足球球门安全使用指南 |
Guide for Safer Use of Movable Soccer Goals |
| ASTM D 6388-1999 |
评价土工网耐液体化学性试验的标准操作规程 |
Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids |
| ASTM D 6385-1999 |
通过灰化对活性碳中酸可提取含量的标准试验方法 |
Standard Test Method for Determining Acid Extractable Content in Activated Carbon by Ashing |
| ASTM D 4106-1996 |
非平衡法测定非越流性有侧限的蓄水层透射系数及储存系数的试验方法(分析程序) |
Standard Test Method (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method |
| ASTM D 4212-1999 |
浸渍型粘度杯测定粘度的试验方法 |
Test Method for Viscosity by Dip-Type Viscosity Cups |
| ASTM D 4182-1997 |
煤和焦炭取样及分析的ASTM法实验室评定标准实施规程 |
Standard Practice for Evaluation of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke |
| ASTM D 6125-1997 |
纸和纸板耐弯曲性的标准试验方法(GURLEY型试验机) |
Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester) |
| ASTM C 993-1997 |
行人区自动SNM监视器的内部性能评定标准指南 |
Standard Guide for In-Plant Performance Evaluation of Automatic Pedestrian SNM Monitors |
| ASTM C 966-1998 |
石棉水泥无压管道的安装标准指南 |
Standard Guide for Installing Asbestos-Cement Nonpressure Pipe |
| ASTM D 3364-1999 |
聚氯乙烯和流变的不稳定热塑性材料流动速率的测试试验方法 |
Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications |
| ASTM D 4079-2000 |
蒸汽脱脂级亚甲基氯的标准规范 |
Standard Specification for Vapor-Degreasing Grade Methylene Chloride |
| ASTM E 587-2000 |
用触点法作超声波斜束检验的标准规程 |
Standard Practice for Ultrasonic Angle-Beam Examination by the Contact Method |
| ASTM E 215-1998 |
无缝铝合金管的电磁检验用的标准化设备 |
Standardizing Equipment for Electromagnetic Examination of Seamless Aluminum-Alloy Tube |
| ASTM D 3426-1997 |
用脉冲波法测定固体电绝缘材料的电介质击穿电压及抗电强度的标准试验方法 |
Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves |
| ASTM D 4283-1998 |
硅树脂液粘度的标准试验方法 |
Standard Test Method for Viscosity of Silicone Fluids |
| ASTM D 5036-1999 |
粘固聚氯乙烯屋面板应用的标准实施规范 |
Standard Practice for Application of Adhered Poly(Vinyl Chloride) Sheet Roofing |
| ASTM D 5032-1997 |
用含水甘油溶液法保持恒定相对湿度的标准实施规范 |
Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions |
| ASTM D 6383-1999 |
由EPDM屋顶膜材料制造的胶粘剂接头的失效时间(蠕变破裂)的标准操作规程 |
Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material |
| ASTM D 6340-1998 |
在含水或合成环境中测定放射性标记塑料材料的需氧生物降解性的标准试验方法 |
Standard Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment |
| ASTM D 6325-1998 |
测定地毯胶合铺料粘合剂的开放装配时间的试验方法 |
Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives |
| ASTM E 1927-1998 |
进行主观性路面行使质量额定的标准指南 |
Standard Guide for Conducting Subjective Pavement Ride Quality Ratings |
| ASTM E 1926-1998 |
从纵剖面测量计算道路国际粗糙度指数的标准操作规程 |
Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements |
| ASTM F 1932-1998 |
测量睡袋纺织纤维回弹力的标准试验方法 |
Standard Test Method for Measuring Sleeping Bag Loft |
| ASTM F 1931-1998 |
体操用着地垫和训练用地板面特性的标准试验方法 |
Standard Test Method for Characterization of Gymnastic Landing Mats and Floor Exercise Surfaces |
| ASTM F 1934-1998 |
称重背包式或登山用帐蓬的试验方法 |
Standard Test Method for Weighing a Backpacking or Mountaineering Tent |
| ASTM E 1213-1997 |
热成像系统用可分辨的最小温度差的试验方法 |
Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems |
| ASTM D 3367-1998 |
在离心力作用下聚氯乙烯树脂的增塑剂吸收作用的试验方法 |
Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force |
| ASTM D 3366-1995 |
熔融状态下和加热后顺酐和苯酐颜色的试验方法(铂-钴比例) |
Test Method for Color of Maleic Anhydride and Phthalic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) |
| ASTM D 420-1998 |
工程、设计和施工用工地表征的标准指南 |
Standard Guide to Site Characterization for Engineering, Design, and Construction Purposes |
| ASTM D 413-1998 |
粘合到软质基底的橡胶特性的标准试验方法 |
Standard Test Methods for Rubber Property - Adhesion to Flexible Substrate |
| ASTM D 2982-1998 |
检测已用润滑油中乙二醇基防冻剂的标准试验方法 |
Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils |
| ASTM E 1000-1998 |
射线检验法 |
Standard Guide for Radioscopy |
| ASTM E 1968-1998 |
法医检定法中微晶体试验的标准指南 |
Standard Guide for Microcrystal Testing in the Forensic Analysis of Cocaine |
| ASTM D 6288-1998 |
试验前回收塑料的清洗和分离的标准操作规程 |
Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing |
| ASTM F 1899-1998 |
无水压机装配的食品废气物搅碎机的标准规范 |
Standard Specification for Food Waste Pulper Without Waterpress Assembly |
| ASTM E 671-1998 |
在退火的玻璃实验室器皿中最大容许热残留应力 |
Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus |
| ASTM A 691-1998 |
高温下高压装置用电熔焊碳素钢和合金钢管的标准规范 |
Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
| ASTM E 1104-1998 |
医用温度计测头罩和护壳标准规范 |
Standard Specification for Clinical Thermometer Probe Covers and Sheaths |
| ASTM C 723-1998 |
砖和瓦用耐化学侵蚀的树脂薄浆标准实施规程 |
Standard Practice for Chemical-Resistant Resin Grouts for Brick or Tile |
| ASTM C 702-1998 |
将集料的现场试样减小到适于试验的标准实施规程 |
Standard Practice for Reducing Samples of Aggregate to Testing Size |
| ASTM C 668-1998 |
石棉水泥传输管件标准规范 |
Standard Specification for Asbestos-Cement Transmission Pipe |
| ASTM E 1606-1999 |
电气用回火铜杆的电磁(涡流)检验用标准规程 |
Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper Redraw Rod for Electrical Purposes |
| ASTM E 299-1997 |
有机溶剂中过氧化物痕量的试验方法 |
Standard Test Method for Trace Amounts of Peroxides In Organic Solvents |
| ASTM C 465-1999 |
制造水硬性水泥用添加剂标准规范 |
Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements |
| ASTM C 459-1997 |
石棉水泥板制品的标准试验方法 |
Standard Test Methods for Asbestos-Cement Flat Products |
| ASTM D 866-1999 |
电线及电缆用丁苯合成橡胶套 |
Standard Specification for Crosslinked Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable |
| ASTM C 811-1998 |
耐化学侵蚀的树脂整体面层用混凝土表面制备的标准实施规程 |
Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings |
| ASTM D 5299-1999 |
测定环境放射性物质用地下水井,上层滞水带监测装置,地上凿穿孔及其他设备的交付使用的标准指南 |
Standard Guide for Decommissioning of Ground Water Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities |
| ASTM D 5080-2000 |
百分比压缩的快速测量的标准试验方法 |
Standard Test Method for Rapid Determination of Percent Compaction |
| ASTM D 6492-1999 |
锌及锌/铝合金涂覆钢上六价铬检测的标准实施规程 |
Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel |
| ASTM C 770-1998 |
玻璃应力测量的标准试验方法.光学系数 |
Standard Test Method for Measurement of Glass Stress - Optical Coefficient |
| ASTM D 5535-1998 |
与路面接合点和裂纹用现场密封胶相关的标准术语 |
Standard Terminology Relating to Formed-in-Place Sealants for Joints and Cracks in Pavements |
| ASTM C 416-1997 |
硅土耐火砖的标准分类 |
Standard Classification of Silica Refractory Brick |
| ASTM E 1193-1997 |
用水蚤属magna进行生命周期毒性试验的标准指南 |
Standard Guide for Conducting Daphnia magna Life-Cycle Toxicity Tests |
| ASTM E 1574-1998 |
居住空间声测量的标准试验方法 |
Standard Test Method for Measurement of Sound in Residential Spaces |
| ASTM F 1909-1998 |
预制开口泡沫橡胶桶和桶衬垫规范 |
Specification for Preformed Open-Cell Sponge Rubber Pail and Drum Gaskets |
| ASTM E 1967-1998 |
用油浸法和相衬显微镜自动测定玻璃样品的折射指数的标准试验方法 |
Standard Test Method for the Automated Determinaton of Refractive Index of Glass Samples Using the Oil Immersion Method and a Phase Contrast Microscope |
| ASTM E 1146-1997 |
盐酸(工业级盐酸) |
Standard Specification for Muriatic Acid (Technical Grade Hydrochloric Acid) |
| ASTM E 650-1997 |
安装压电声发射传感器 |
Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors |
| ASTM D 705-1999 |
脲甲醛模制化合物的标准规范 |
Standard Specification for Urea-Formaldehyde Molding Compounds |
| ASTM D 1896-1999 |
热固化合物传递模塑试样的标准操作规程 |
Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds |
| ASTM D 3562-1999 |
机织耐干洗外套织物的标准性能规范 |
Standard Performance Specification for Woven Drycleanable Coat Fabrics |
| ASTM C 1377-1997 |
表面/应力测量装置的校准的标准试验方法 |
Standard Test Method for Calibration of Surface/Stress Measuring Devices |
| ASTM A 874/A 874M-1998 |
低温设备用铁素体球墨铸铁铸件的标准规范 |
Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service |
| ASTM F 1233-1998 |
安全玻璃材料和系统的标准试验方法 |
Standard Test Method for Security Glazing Materials And Systems |
| ASTM F 1232-1998 |
一次性薄膜色带测试码模式的形成 |
Standard Practice for Generating a Test Pattern for Single-Pass Film Ribbons |
| ASTM F 1225-1999 |
测量胶片和纤维盒的打印带出口力的测试方法 |
Standard Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges |
| ASTM D 6081-1998 |
润滑剂水中毒性试验的标准操作规程:样品制备和结果判断 |
Standard Practice for Aquatic Toxicity Testing of lubricants: Sample Preparation and Results Interpretation |
| ASTM D 6193-1997 |
针角和缝合的标准操作规程 |
Standard Practice for Stitches and Seams |
| ASTM E 250-1998 |
使用CODEN的标准实施规程 |
Standard Practice for Use of CODEN |
| ASTM F 1469-1999 |
无损检验用测试设备运行的重复性和再生性研究 |
Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing |
| ASTM F 1467-1999 |
半导体器件和微电路的电离辐射效应试验中X射线测试仪(近似等于10keV辐射量子)的使用标准指南 |
Standard Guide for Use of an X-Ray Tester ([approximate]10 keV Photons) in Ionizing Radiation Effects Testing of Semiconductor Devices and Microcircuits |
| ASTM B 216-1997 |
火法精炼工业纯铜标准规范.精炼型材 |
Standard Specification for Tough-Pitch Fire-Refined Copper - Refinery Shapes |
| ASTM E 1508-1998 |
用能量分散能谱学作定量分析的标准指南 |
Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy |
| ASTM E 1507-1998 |
光学辐射直读仪表的分光计的描述与规定用标准指南 |
Standard Guide for Describing and Specifying the Spectrometer of an Optical Emission Direct-Reading Instrument |
| ASTM E 1506-1997 |
分析酸级氟化钙(荧石)的标准试验方法 |
Standard Test Methods for Analysis of Acid-Grade Calcium Fluoride (Fluorspar) |
| ASTM E 1252-1998 |
获取定性分析用红外线光谱的通用技术的标准实施规程 |
Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis |
| ASTM D 6072-1996 |
土工合成粘土衬垫获得样品的标准指南 |
Standard Guide for Obtaining Samples of Geosynthetic Clay Liners |
| ASTM D 3166-1999 |
用抗张负荷法(金属之间)测定胶粘剂抗剪疲劳特性的试验方法 |
Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/ Metal) |
| ASTM D 5958-1999 |
油基油墨树脂溶液配制用标准操作规程 |
Standard Practices for Preparation of Oil-Based Ink Resin Solutions |
| ASTM F 1787-1998 |
携带式电热轮转烤肉器烤箱性能标准试验方法 |
Standard Test Method for Performance of Rotisserie Ovens |
| ASTM D 6336-1998 |
用真空改良的ε形叶片混合器评定车辆颜料湿度的实施规程 |
Practice for Evaluation of Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer |
| ASTM D 6327-1998 |
通过滤膜上活动取样对室内空气工作水平和氡衰减产品浓度测定的标准试验方法 |
Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter |
| ASTM F 1929-1998 |
用染色渗透液检测多孔医疗包装汽封泄漏的标准试验方法 |
Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration |
| ASTM D 6066-1996 |
液化潜能的评价用砂的常规耐穿透性测定的标准操作规程 |
Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential |
| ASTM D 5877-1995 |
基于数据分析计算的痕量元素示意图和主要离子的地下水化学分析结果表示的标准指南 |
Standard Guide for Displaying Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements-Diagrams Based on Data Analytical Calculations |
| ASTM F 1845-1997 |
用高质量减少辉光放电质谱仪测量电子级铝铜、铝硅和铝铜硅中微量金属杂质的标准试验方法 |
Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Reduction Glow Discharge Mass Spectrometer |
| ASTM D 4243-1999 |
新的和老化的电绝缘纸和纸板聚合作用的平均粘滞程度的测量的标准试验方法 |
Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards |
| ASTM D 6231-1998 |
HFC-125标准规范(戊氟乙烷,C2HF5) |
Standard Specification for HFC-125 (Pentafluoroethane, C2HF5) |
| ASTM D 6393-1999 |
用承载指数对散装固体特性的标准试验方法 |
Standard Test Method for Bulk Solids Characterization by Carr Indices |
| ASTM D 3155-1998 |
测试未熟化的土壤与石灰掺和物中石灰含量的标准试验方法 |
Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures |
| ASTM C 1436-1999 |
喷浆混凝土用材料的标准规范 |
Standard Specification for Materials for Shotcrete |
| ASTM C 1438-1999 |
水硬水泥混凝土和灰浆用乳液和粉末状聚合物改性剂的标准规范 |
Standard Specification for Latex and Powder Polymer Modifiers for Hydraulic Cement Concrete and Mortar |
| ASTM C 1439-1999 |
聚合物改性的灰浆和混凝土的标准试验方法 |
Standard Test Methods for Polymer-Modified Mortar and Concrete |
| ASTM B 598-1998 |
抗拉试验中确定铜合金偏置屈服强度的标准实施规程 |
Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys |
| ASTM F 1985-1999 |
气动球形控制阀标准规范 |
Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves |
| ASTM B 540-1997 |
电触点用钯合金标准规范 |
Standard Specification for Palladium Electrical Contact Alloy |
| ASTM C 1270-1997 |
内置穿过式金属探测器探测灵敏度标志的标准实用规程 |
Standard Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors |
| ASTM F 1901-1998 |
屋顶排水系统用聚乙烯管和配件的标准规范 |
Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems |
| ASTM D 2304-1997 |
硬质电绝缘材料耐热性的标准试验方法 |
Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials |
| ASTM D 2303-1997 |
绝缘材料液态污染、斜面漏电痕迹和腐蚀的标准试验方法 |
Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials |
| ASTM A 176-1999 |
不锈和耐热铬钢板、薄钢板及带材的标准规范 |
Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip |
| ASTM D 6051-1996 |
环境废物管理活动现场次级取样和复合取样的标准指南 |
Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities |
| ASTM D 5594-1998 |
傅里叶变换红外光谱法(FT-IR)测定乙基乙烯基乙醋酸脂(EVA)共聚物中乙烯基醋酸脂含量的标准试验方法 |
Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR) |
| ASTM D 1084-1997 |
胶粘剂粘度的测试方法 |
Test Methods for Viscosity of Adhesives |
| ASTM D 2318-1998 |
焦油和硬沥青中喹啉不溶物(QI)含量的标准试验方法 |
Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch |
| ASTM D 2301-1999 |
氯乙烯塑料压敏电绝缘带 |
Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape |
| ASTM D 2295-1996 |
高温下用拉力负荷法测定金属之间胶粘剂剪切强度的试验方法 |
Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal) |
| ASTM A 252-1998 |
焊接钢和无缝钢管桩的标准规范 |
Standard Specification for Welded and Seamless Steel Pipe Piles |
| ASTM/ISO 14032-1999 |
技术报告.环境管理.环境性能评定事例 |
Technical Report - Environmental management - Examples of environmental performance evaluation (EPE) |
| ASTM E 334-2001 |
红外线微量分析的一般技术的标准操作规程 |
Standard Practice for General Techniques of Infrared Microanalysis |
| ASTM E 997-2001 |
用破坏法测定均匀静载荷影响下外窗玻璃,隔墙和门的结构性能的标准试验方法 |
Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods |
| ASTM E 1231-2001 |
热不稳定材料危害潜在灵敏值计算的标准实施规程 |
Standard Practice for Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable Materials |
| ASTM/ISO 14042-2000 |
环境管理.生物圈评定.生物圈影响评定 |
Environmental management - Life cycle assessment - Life cycle impact assessment |
| ASTM/ISO 14050-1998 |
环境管理.词汇 |
Environmental management - Vocabulary |
| ASTM F 2087-2001 |
玻璃纤维编织绳和油绳的包装标准规范 |
Standard Specification for Packing, Fiberglass, Braided, Rope, and Wick |
| ASTM D 3550-2001 |
土壤的厚壁环衬分隔筒取样的标准实施规程 |
Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils |
| ASTM D 3658-2001 |
测定经紫外线处理的玻璃和金属粘结接缝扭矩强度的标准试验方法 |
Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints |
| ASTM D 3163-2001 |
用抗拉荷载法在剪切胶粘剂粘接刚性塑料搭接接头的抗剪切强度的标准试验方法 |
Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading |
| ASTM F 1779-1997 |
报告目观测水中油含量的标准操作规程 |
Standard Practice for Reporting Visual Observations of Oil on Water |
| ASTM E 1965-1998 |
间歇测定病人体温用的红外温度计的标准规范 |
Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature |
| ASTM C 267-1997 |
灰浆、薄浆、整块铺面石料和聚脂混凝土耐化学侵蚀性的标准试验方法 |
Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes |
| ASTM D 6273-1998 |
天然气气味强度的标准试验方法 |
Standard Test Methods for Natural Gas Odor Intensity |
| ASTM D 6259-1998 |
定量的汇合限制测定的标准操作规程 |
Standard Practice for Determination of a Pooled Limit of Quantitation |
| ASTM C 904-1998 |
耐化学腐蚀的非金属材料标准术语 |
Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials |
| ASTM C 903-1998 |
用冷喷射法制作耐火混凝土样品的标准实施规程 |
Standard Practice for Preparing Refractory Castable Specimens by Cold Gunning |
| ASTM E 526-1997 |
用钛的放射性测定快速中子反应率的试验方法 |
Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium |
| ASTM B 663-1994 |
银钨硬质合金电触点材料标准规范 |
Standard Specification for Silver-Tungsten Carbide Electrical Contact Material |
| ASTM D 6101-1997 |
通过图像分析对纸浆,纸和纸板内污垢的等值黑色面积(EBA)的标准试验方法 |
Standard Test Method for Equivalent Black Area (EBA) of Dirt in Pulp, Paper and Paperboard by Image Analysis |
| ASTM D 1144-1999 |
胶粘剂粘结强度提高的测定 |
Determining Strength Development of Adhesive Bonds |
| ASTM D 1141-1998 |
海水代用品 |
Standard Practice for the Preparation of Substitute Ocean Water |
| ASTM F 1988-1999 |
户外用带可调节底座的、有或没有活动臂的塑料躺椅的标准性能要求 |
Standard Performance Requirements for Plastic Chaise Lounges, With or Without Moving Arms, With Adjustable Backs, for Outdoor Use |
| ASTM D 2415-1998 |
测试煤焦油和硬沥青中灰分的标准试验方法 |
Standard Test Method for Ash in Coal Tar and Pitch |
| ASTM E 1990-1998 |
操作上与40 CFR280部分规定相符合的地下储罐系统性能评定的标准指南 |
Standard Guide for Performing Evaluations of Underground Storage Tank Systems for Operational Conformance with 40 CFR, Part 280 Regulations |
| ASTM B 667-1997 |
测量电触点电阻用探测器的结构及使用标准操作规程 |
Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance |
| ASTM F 1981-1999 |
用于呼吸系统的吸气导管标准规范 |
Standard Specification for Suction Catheters for Use in the Respiratory Tract |
| ASTM C 1428-1999 |
用单支架气体源多收集器质谱仪法进行六氟化铀的同位素分析的标准试验方法 |
Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Multiple Collector Mass Spectrometer Method |
| ASTM G 44-1999 |
在3.5%氯化钠中性溶液中用交替浸渍法的金属及合金暴露的标准实施规程 |
Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% Sodium Chloride Solution |
| ASTM E 1489-1998 |
通过用惯性剖面测量装置做的纵剖面测量来计算道路承载值的标准实践 |
Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device |
| ASTM C 1344-1997 |
用标准气体源质谱法进行六氟化铀的同位分析的标准试验方法 |
Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method |
| ASTM D 2710-1999 |
电位滴定法测定石油烃溴指数的试验方法 |
Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration |
| ASTM A 314-1997 |
锻造用不锈及耐热钢坯及钢棒的标准规范 |
Standard Specification for Stainless Steel Billets and Bars for Forging |
| ASTM D 5743-1997 |
柱桶或类似容器中有或无固体粒子的单层或多层液体抽样的标准实施规程 |
Standard Practice for Sampling Single or Multilayered Liquids, With or Without Solids, in Drums or Similar Containers |
| ASTM E 310-1999 |
锡青铜铸件用参考射线照片 |
Standard Reference Radiographs for Tin Bronze Castings |
| ASTM E 272-1999 |
高强度铜基和镍铜合金铸件用参考射线照片 |
Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings |
| ASTM A 229/A 229M-1999 |
机械弹簧用油回火钢丝标准规范 |
Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs |
| ASTM D 2572-1997 |
氨基甲酸乙酯材料或预聚物中异氰酸酯基团的试验方法 |
Test Method for Isocyanate Groups in Urethane Materials or Prepolymers |
| ASTM A 220/A 220M-1999 |
珠光体可锻铸铁的标准规范 |
Standard Specification for Pearlitic Malleable Iron |
| ASTM A 167-1999 |
不锈钢和耐热铬镍钢板、薄钢板及带材的标准规范 |
Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
| ASTM F 1496-1999 |
对流式烘炉性能的标准试验方法 |
Standard Test Method for Performance of Convection Ovens |
| ASTM D 3990-1999 |
纺织品缺陷的相关标准术语 |
Standard Terminology Relating to Fabric Defects |
| ASTM D 4063-1999 |
电绝缘板标准规范 |
Standard Specification for Pressboard for Electrical Insulating Purposes |
| ASTM E 154-1999 |
混凝土板、墙或土壤覆层的与地面接触的水气隔层的标准试验方法 |
Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover |
| ASTM A 289/A 289M-1997 |
发电机用无磁档圈用合金钢锻件的标准规范 |
Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators |
| ASTM D 570-1998 |
塑料吸水率的标准试验方法 |
Standard Test Method for Water Absorption of Plastics |
| ASTM A 459-1997 |
镀锌扁钢铠装带的标准规范 |
Standard Specification for Zinc-Coated Flat Steel Armoring Tape |
| ASTM C 1160-1997 |
耐化学腐蚀炭砖用标准规范 |
Standard Specification for Chemical-Resistant Carbon Brick |
| ASTM B 430-1997 |
用比浊法测定耐火金属粉末粒度分布的标准试验方法 |
Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry |
| ASTM D 6619-2000 |
用高速扩散法混合颜料的标准实施规程 |
Standard Practice for Incorporating Pigments by High Speed Dispersion |
| ASTM D 6517-2000 |
地下水样品现场保护的标准指南 |
Standard Guide for Field Preservation of Ground-Water Samples |
| ASTM D 6527-2000 |
用稳态离心法测定多孔介质中不饱和和饱和液压传导性的标准试验方法 |
Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation |
| ASTM B 425-1999 |
镍铁铬钼铜合金(UNS N08825和UNS N08221)杆材和棒材标准规范 |
Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar |
| ASTM F 390-1998 |
用共线四探针法对金属薄膜的薄膜耐力的试验方法 |
Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array |
| ASTM D 2288-1997 |
增塑剂受热时重量损失的试验方法 |
Standard Test Method for Weight Loss of Plasticizers on Heating |
| ASTM D 4307-1999 |
作为分析标准的液体掺混物制备的标准操作规程 |
Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards |
| ASTM D 2565-1999 |
户外用塑料的氙弧型曝光装置的标准实施规范 |
Standard Practice for Xenon Arc Exposure of Plastics Intended for Outdoor Applications |
| ASTM D 5899-1998 |
计算机材料管理系统用橡胶化合材料的标准分类系统 |
Standard Classification System for Rubber Compounding Materials for Use in Computer Material Management Systems |
| ASTM D 5889-1997 |
土工合成织物粘土衬质量控制的标准实施规程 |
Standard Practice for Quality Control of Geosynthetic Clay Liners |
| ASTM A827/A827M-1993 |
锻造及类似用途的碳钢板的标准规范 |
Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications |
| ASTM D 3631-1999 |
测量地面大气压的标准试验方法 |
Standard Test Methods for Measuring Surface Atmospheric Pressure |
| ASTM F 1687-1997 |
描述海岸线注油条件的目录和术语的标准导则 |
Standard Guide for Terminology and Indices to Describe Oiling Conditions on Shorelines |
| ASTM F 621-1997 |
外科植入用不锈钢锻件的标准规范 |
Standard Specification for Stainless Steel Forgings for Surgical Implants |
| ASTM D 6214-1998 |
化学熔化方法测定连接土工薄膜地缝完整性的标准试验方法 |
Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods |
| ASTM F617M-1995 |
测量MOSFET线性阈电压的标准试验方法 |
Standard Test Method for Measuring MOSFET Linear Threshold VoltageMetric |
| ASTM D 312-2000 |
屋顶用沥青的标准规范 |
Standard Specification for Asphalt Used in Roofing |
| ASTM D 476-2000 |
二氧化钛干颜料色素的标准分类 |
Standard Classification for Dry Pigmentary Titanium Dioxide Products |
| ASTM D 3843-2000 |
核装置防护涂层质量保证的标准实施规程 |
Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities |
| ASTM D 4253-2000 |
使用振动台测定土壤最大标准密度和单位重量的标准试验方法 |
Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
| ASTM D 4254-2000 |
土壤最低标准密度和单位重量的标准试验方法与相对密度的计算 |
Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density |
| ASTM D 3094-2000 |
气溶胶制品的渗出速率的标准试验方法 |
Standard Test Method for Seepage Rate of Aerosol Products |
| ASTM D 3154-2000 |
导管中平均速度的标准试验方法(皮托管法) |
Standard Test Method for Average Velocity in a Duct (Pitot Tube Method) |
| ASTM E 547-2000 |
用循环静态气压差法测定外窗、天窗、护墙及门渗水度的标准测试方法 |
Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference |
| ASTM D 1587-2000 |
土工技术用土壤薄壁管抽样的标准操作规程 |
Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes |
| ASTM D 1926-2000 |
纤维素羧基含量的测试方法 |
Standard Test Methods for Carboxyl Content of Cellulose |
| ASTM E 738-2000 |
用络合滴定法测定铁矿石和有关材料中铝含量的标准试验方法 |
Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by Complexometric Titration |
| ASTM D 6486-2001 |
汽车涂层的短时暴露的标准实施规程 |
Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings |
| ASTM E 1385-2000 |
用蒸汽蒸馏法分立和浓缩从火烧瓦砾样品中获取的可燃液体残渣的标准实施规程 |
Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Steam Distillation |
| ASTM D 6629-2001 |
由于腐蚀引起的土壤损耗的评价方法的选择的标准指南 |
Standard Guide for Selection of Methods for Estimating Soil Loss by Erosion |
| ASTM D 6634-2001 |
地下水监测井用净化和取样选择的标准指南 |
Standard Guide for the Selection of Purging and Sampling Devices for Ground-Water Monitoring Wells |
| ASTM/ISO 14061-1998 |
技术报告.林业企业应用环境管理体系标准ISO 14001和ISO 14004的帮助信息 |
Technical Report - Information to assist forestry organizations in the use of Environmental Management System standards ISO 14001and ISO 14004 |
| ASTM/ISO 14020-2000 |
环境标签和说明.一般原则 |
Environmental labels and declarations - General principles |
| ASTM/ISO 14021-1999 |
环境标签和声明.自声明的环境要求(II型环境标签) |
Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) |
| ASTM/ISO 14010-1996 |
环境审核导则.一般原理 |
Guidelines for environmental auditing--General principles |
| ASTM/ISO 14011-1996 |
环境审核导则.审核程序.环境管理体系的审核 |
Guidelines for environmental auditing--Audit procedures--Auditing of environmental management systems |
| ASTM E 1645-2001 |
热板法或微波溶解法连续分析铅含量用干漆样品制备的标准实施规程 |
Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
| ASTM E 1726-2001 |
用热板溶解法连续分析铅含量用土壤样品制备的标准实施规程 |
Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| ASTM D 6141-1997 |
与液体化学兼容的土工合成粘土衬垫的粘土部分筛选的标准指南 |
Standard Guide for Screening Clay Portion of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids |
| ASTM D 2054-1999 |
拉链带耐磨擦色牢度的试验方法 |
Standard Test Method for Colorfastness of Zipper Tapes to Crocking |
| ASTM B 170-1999 |
无氧电解铜标准规范.精炼型材 |
Standard Specification for Oxygen-Free Electrolytic Copper - Refinery Shapes |
| ASTM G 116-1999 |
大气电流腐蚀用绕线螺栓试验 |
Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion |
| ASTM D 1881-1997 |
在玻璃器皿中发动机冷却剂起泡倾向的试验方法 |
Test Method for Foaming Tendencies of Engine Coolants in Glassware |
| ASTM E 1514-1998 |
结构级固定接缝屋面钢板系统 |
Standard Specification for Structural Standing Seam Steel Roof Panel Systems |
| ASTM D 4107-1998 |
饮用水中氚含量的试验方法 |
Standard Test Method for Tritium in Drinking Water |
| ASTM A 714-1999 |
高强度低合金焊接和无缝钢管的标准规范 |
Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe |
| ASTM A 712-1997 |
软磁性合金电阻率的标准试验方法 |
Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys |
| ASTM D 2444-1999 |
用落锤法测定热塑性塑料管和配件耐冲击性的试验方法 |
Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) |
| ASTM D 2440-1999 |
矿物绝缘油氧化稳定性的试验方法 |
Test Method for Oxidation Stability of Mineral Insulating Oil |
| ASTM E 1502-1998 |
基准温度冻结点室的使用 |
Standard Guide for Use of Freezing-Point Cells for Reference Temperatures |
| ASTM F 1466-1999 |
金属与陶瓷密封用铁镍钴合金的标准规范 |
Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications |
| ASTM D 4025-1997 |
报告地下喷射的水中沉积物的检验和分析结果的规程 |
Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection |
| ASTM E 1997-1999 |
航天器材料选择的标准操作规程 |
Standard Practice for the Selection of Spacecraft Materials |
| ASTM D 4013-1998 |
用回旋剪切压实器制备沥青混合物试样准备的标准操作规程 |
Standard Practice for Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear Compactor |
| ASTM D 4865-1998 |
石油燃料系统静电产生和耗散的标准指南 |
Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
| ASTM D 6329-1998 |
使用静态环境室支持微生物生长的室内材料能力评价方法学的开发标准指南 |
Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers |
| ASTM D 5997-1996 |
通过紫外线,过硫酸盐氧化作用,膜导电位检测对水中总碳,无机碳在线监测的标准试验方法 |
Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection |
| ASTM C 1066-1997 |
核纯级氧化锆 |
Nuclear Grade Zirconium Oxide Pellets |
| ASTM D 3283-1998 |
作为电绝缘材料用的气体 |
Air as an Electrical Insulating Material |
| ASTM E 2014-1999 |
金相实验室安全的标准指南 |
Standard Guide on Metallographic Laboratory Safety |
| ASTM F 1786-1997 |
蒸锅性能的标准试验方法 |
Standard Test Method for Performance of Braising Pans |
| ASTM D 6054-1997 |
试验用调整电气绝缘材料的标准操作规程 |
Standard Practice for Conditioning Electrical Insulating Materials for Testing |
| ASTM D 5158-1998 |
粉末活性碳粒径测定的标准试验方法 |
Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving |
| ASTM D 5148-1997 |
离心机煤油当量的标准试验方法 |
Standard Test Method for Centrifuge Kerosine Equivalent |
| ASTM D 5072-1998 |
饮用水中氡的标准试验方法 |
Standard Test Method for Radon in Drinking Water |
| ASTM D 5029-1998 |
活性碳中水可溶物的标准试验方法 |
Standard Test Method for Water Solubles in Activated Carbon |
| ASTM G 82-1998 |
预测电流腐蚀特性用电流系列的制定和使用标准指南 |
Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance |
| ASTM D 1989-1997 |
用微处理机控制的恒温量热器测量煤和焦炭总热值的试验方法 |
Test Method for Gross Calorific Value of Coal and Coke by Microprocessor Controlled Isoperibol Calorimeters |
| ASTM E 1878-1997 |
专用实验室玻璃容量瓶的标准规范 |
Standard Specification for Laboratory Glass Volumetric Flasks, Special Use |
| ASTM E 1950-1998 |
来源于化学分析法的报告结果的标准操作规程 |
Standard Practice for Reporting Results from Methods of Chemical Analysis |
| ASTM F 1827-1997 |
与食品加工设备有关的标准术语 |
Standard Terminology Relating to Food Service Equipment |
| ASTM D 4958-1997 |
乳胶漆用刮路刷的比较用标准试验方法 |
Standard Test Method for Comparison of the Brush Drag of Latex Paints |
| ASTM D 4917-1997 |
用水平面法测试无涂层书写纸和印刷纸的静磨擦和动磨擦系数的标准试验方法 |
Standard Test Method for Coefficient of Static and Kinetic Friction of Uncoated Writing and Printing Paper by Use of the Horizontal Plane Method |
| ASTM E 907-1996 |
使用刚性绝缘的钢盖板的屋顶及沥青组合屋顶的防隆起现场试验的方法 |
Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems |
| ASTM D 4663-1998 |
聚氨酯原材料的标准试验方法:异氰酸酯的可水解氯的测定 |
Standard Test Method for Polyurethane Raw Materials Determination of Hydrolyzable Chlorine of Isocyanates |
| ASTM D 4062-1999 |
牵伸法测定涂料平整性的标准试验方法 |
Standard Test Method for Leveling of Paints by Draw-Down Method |
| ASTM D 6410-1999 |
植物鞣皮液剂酸度测定的标准试验方法 |
Standard Test Method for Determining Acidity of Vegetable Tanning Liquors |
| ASTM F 856-1997 |
加热、通风及空调符号 |
Standard Practice for Mechanical Symbols, Shipboard - Heating, Ventilation, and Air Conditioning (HVAC) |
| ASTM D 4028-1996 |
涂乙烯的纤维玻璃纱编的日光罩的标准规范 |
Standard Specification for Solar Screening Woven from Vinyl-Coated Fiber Glass Yarn |
| ASTM D 4872-1999 |
电线和电缆填充物介电性测试的标准试验方法 |
Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds |
| ASTM F 372-1999 |
用红外线探测技术检查挠性隔栅材料水蒸气传递率的试验方法 |
Standard Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique |
| ASTM F 1886-1998 |
用目视检验测定医疗包装密封完整性的标准试验方法 |
Standard Test Method for Determining Integrity of Seals for Medical Packaging by Visual Inspection |
| ASTM D 411-1998 |
电绝缘试验用紫胶片的标准试验方法 |
Standard Test Methods for Shellac Used for Electrical Insulation |
| ASTM D 1527-1999 |
丙烯腈-丁二稀-苯乙稀共聚物塑料管标准规范.表40和80 |
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 |
| ASTM D 1722-1998 |
水溶性溶剂的水可混性试验方法 |
Test Method for Water Miscibility of Water-Soluble Solvents |
| ASTM D 1721-1997 |
磷酸三甲苯酯的高锰酸盐时间的测试方法 |
Test Method for Permanganate Time of Tricresyl Phosphate |
| ASTM D 1631-1999 |
用碘试剂法测定苯酚和有关原料中水分的试验方法 |
Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method |
| ASTM D 1608-1998 |
气态燃烧产物中氮的氧化物的测试方法(苯酚二磺酸法) |
Standard Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedures) |
| ASTM D 1489-1997 |
含水胶粘剂中不挥发物含量的试验方法 |
Test Method for Nonvolatile Content of Aqueous Adhesives |
| ASTM D 1475-1998 |
色漆、清漆、喷漆及相关产品密度的试验方法 |
Standard Test Method for Density of Liquid Coatings, Inks, and Related Products |
| ASTM D 1474-1998 |
有机涂层压痕硬度的试验方法 |
Test Methods for Indentation Hardness of Organic Coatings |
| ASTM D 5500-1998 |
进液阀门沉积形成的不含铅自动火花点火引擎燃料的车辆评价标准试验方法 |
Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation |
| ASTM D 5496-1998 |
土工合成织物现场浸渍试验标准操作规程 |
Standard Practice for In Field Immersion Testing of Geosynthetics |
| ASTM A 854/A 854M-1998 |
镀锌高抗拉强度栅栏和格架用光滑钢丝的标准规范 |
Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire |
| ASTM D 5504-1998 |
用气相色谱和化学发光法测定天然气和气体燃料中硫化物含量的标准试验方法 |
Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
| ASTM D 4803-1997 |
聚氯乙烯(PVC)建筑产品中预测生热性的标准试验方法 |
Standard Test Method for Predicting Heat Buildup in PVC Building Products |
| ASTM C 1360-1996 |
室温下连续纤维增强高级陶瓷的等高度、轴向的和双向拉伸循环疲劳强度的标准规程 |
Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
| ASTM D 6074-1999 |
烃类润滑基油特性的标准导则 |
Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils |
| ASTM F 874-1998 |
微波感受器温度测量及外形图绘制的方法 |
Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors |
| ASTM D 6176M-1997 |
用电阻温度传感器(米制)测量表面大气温度的标准操作规程 |
Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors (Metric) |
| ASTM D 6178-1997 |
短期吸入物暴露于由基床排放的挥发性有机化学药品的估计的标准操作规程 |
Standard Practice for Estimation of Short-Term Inhalation Exposure to Volatile Organic Chemicals Emitted from Bedding Sets |
| ASTM F 1755M-1996 |
船用固态条形图仪表的标准规范(米制） |
Standard Specification for Solid State Bargraph Meters for Shipboard Use [Metric] |
| ASTM D 5169-1998 |
钩状和环状连接紧固件的剪切强度的试验方法(动态法)的标准试验方法 |
Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners |
| ASTM D 6146-1997 |
检测分水界水溶氮的标准指南 |
Standard Guide for Monitoring Aqueous Nutrients in Watersheds |
| ASTM D 5995-1998 |
寒冷区域现场环境特性的标准指南 |
Standard Guide for Environmental Site Characterization in Cold Regions |
| ASTM F 1190-1999 |
未加偏压的电子元件的中子照射标准指南 |
Standard Guide for Neutron Irradiation of Unbiased Electronic Components |
| ASTM E 204-1998 |
根据ASTM编码带及化学分类索引用红外线吸收光谱法进行材料的鉴别的标准规程 |
Standard Practices for Identification of Material by Infrared Absorption Spectroscopy, Using the ASTM Coded Band and Chemical Classification Index |
| ASTM D 3105-1999 |
弹性和塑性屋顶和防水材料试验方法的索引 |
Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials |
| ASTM E 1345-1998 |
用多次测量法降低颜色测量变异性的影响 |
Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM D 2177-1999 |
吸墨纸的墨水吸收性标准试验方法 |
Standard Test Method for Ink Absorption of Blotting Paper |
| ASTM D 4636-1999 |
液压油、飞机涡轮发动机润滑油和其他高精炼油的腐蚀性和氧化稳定性的试验方法 |
Standard Test Method for Corrosiveness and Oxidation qualility of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils |
| ASTM D 3977-1997 |
水样品中悬浮沉积浓缩物的标准试验方法 |
Standard Test Methods for Determining Sediment Concentration in Water Samples |
| ASTM D 6137-1997 |
燃气脱硫系统用聚合衬垫的耐硫酸性的标准试验方法 |
Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems |
| ASTM D 6153-1997 |
桥梁平台防水膜系统用材料的标准规范 |
Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems |
| ASTM D 622-1999 |
汽车空气制动和真空制动用橡胶软管的试验方法 |
Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System |
| ASTM PS 101-1997 |
医疗保健信息安全框架的临时标准指南 |
Provisional Standard Guide on security framework for Healthcare Information |
| ASTM C 142-1997 |
集料中的土块和易碎颗粒含量的标准试验方法 |
Standard Test Method for Clay Lumps and Friable Particles in Aggregates |
| ASTM D 3826-1998 |
用拉伸试验对聚乙烯和聚丙烯老化过程的最终老化点的测定 |
Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test |
| ASTM D 1593-1999 |
非硬性氯乙烯塑料薄板 |
Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting |
| ASTM D 1586-1999 |
土壤渗透试验和对开管取样的试验方法 |
Test Method for Penetration Test and Split-Barrel Sampling of Soils |
| ASTM D 1436-1997 |
试验用乳胶地板基质抛光剂的使用 |
Application of Emulsion Floor Polishes to Substrates for Testing Purposes |
| ASTM D 6407-1999 |
植物单宁材料中铁和铜的分析的标准试验方法 |
Standard Test Method for Analysis of Iron and Copper in Vegetable Tanning Materials |
| ASTM D 1665-1998 |
焦油制品恩氏比粘度的测试方法 |
Test Method for Engler Specific Viscosity of Tar Products |
| ASTM D 5487-1998 |
冲击试验机测定加载容器模拟跌落的标准试验方法 |
Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines |
| ASTM F 852-1999 |
用户使用的便携式汽油容器 |
Standard Specification for Portable Gasoline Containers for Consumer Use |
| ASTM F 1785-1997 |
蒸气壶性能的标准试验方法 |
Standard Test Method for Performance of Steam Kettles |
| ASTM D 6184-1998 |
从润滑脂中分离油的标准试验方法(锥形筛方法) |
Standard Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method) |
| ASTM D 5975-1996 |
通过测量氧消耗对堆肥的稳定性测定的标准试验方法 |
Standard Test Method for Determining the Stability of Compost by Measuring Oxygen Consumption |
| ASTM D 5506-1998 |
沥青路面材料试验和检查人员资格认证组织的标准操作规程 |
Standard Practice for Organizations Engaged in the Certification of Personnel Testing and Inspecting Bituminous Paving Materials |
| ASTM D 4456-1999 |
粉末状离子交换树脂的物理和化学特性的试验方法 |
Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins |
| ASTM E 1924-1997 |
生物荧光双鞭甲藻毒性试验的标准指南 |
Standard Guide for Conducting Toxicity Tests with Bioluminescent Dinoflagellates |
| ASTM E 1916-1997 |
混合金属的识别和/或分离标准指南 |
Standard Guide for Identification and/or Segregation of Mixed Lots of Metals |
| ASTM E 1877-1997 |
从热解重量分解数据计算材料的耐热性的标准规程 |
Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data |
| ASTM D 1266-1998 |
石油产品中硫的试验方法(燃灯法) |
Standard Test Method for Sulfur in Petroleum Products (Lamp Method) |
| ASTM D 1298-1999 |
比重计法测定原油和液态石油产品的密度、相对密度和API燃油比重 |
Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
| ASTM D 6406-1999 |
植物单宁材料中糖的分析的标准试验方法 |
Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials |
| ASTM D 1828-1996 |
胶粘剂粘接接口和结构的空气暴露 |
Atmospheric Exposure of Adhesive-Bonded Joints and Structures |
| ASTM G 30-1997 |
制作和使用U形弯曲应力腐蚀试样 |
Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens |
| ASTM F 1686-1997 |
评定和确认海岸线注油条件测量的标准指南 |
Standard Guide for Surveys to Document and Assess Oiling Conditions on Shorelines |
| ASTM D 5547-1995 |
原子吸收法测定粉未洗涤剂中的粘土和沸石的标准试验方法 |
Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption |
| ASTM D 3813/D 3813M-1998 |
压敏带非缠绕处拳曲和扭曲的标准试验方法 |
Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes |
| ASTM D 6092-1997 |
冲刷控制用石材特定标准尺寸的标准操作规程 |
Standard Practice for Specifying Standard Sizes of Stone for Erosion Control |
| ASTM D 1779-1998 |
声学材料用胶粘剂的标准规范 |
Standard Specification for Adhesive for Acoustical Materials |
| ASTM D 1754-1997 |
加热和空气对沥青材料影响的试验方法(薄膜炉试验) |
Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test) |
| ASTM E 1628-1994 |
准备总服务局用包括传输和清理数据的材料安全数据单的标准规程 |
Standard Practice for Preparing Material Safety Data Sheets to Include Transportation and Disposal Data for the General Services Administration |
| ASTM D 6408-1999 |
鞣皮厂液剂分析的标准试验方法 |
Standard Test Method for Analysis of Tannery Liquors |
| ASTM D 6409-1999 |
用羊皮割革刀的颜色试验的标准操作规程 |
Standard Practice for Color Tests with Sheepskin Skiver |
| ASTM D 6411/D 6411M-1999 |
低释气性材料室温硫化硅酮橡胶的标准规范 |
Standard Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials |
| ASTM D 2590-1998 |
温石棉取样的试验方法 |
Standard Test Method for Sampling Chrysotile Asbestos |
| ASTM F 904-1998 |
挠性材料制类似层压制品的粘结强度或层间粘结度比较的试验方法 |
Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials |
| ASTM F 1846-1998 |
与陆上搜寻图一起使用的符号和标志的标准操作规程 |
Standard Practice for Symbols and Markings for Use With Land Search Maps |
| ASTM D 1360-1998 |
涂料阻燃性标准试验方法(小室法) |
Standard Test Method for Fire Retardancy of Paints (Cabinet Method) |
| ASTM E 2017-1999 |
健康信息修订的标准指南 |
Standard Guide for Amendments to Health Information |
| ASTM E 2023-1999 |
中子射线照相敏感度显示器制造的标准操作规程 |
Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators |
| ASTM B 700-1997 |
工程用银电沉积覆层标准试验方法 |
Standard Specification for Electrodeposited Coatings of Silver for Engineering Use |
| ASTM G 157-1998 |
评价化学加工工业用煅铁和镍基抗腐蚀合金腐蚀特性的标准指南 |
Standard Guide for Evaluating the Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for the Chemical Process Industries |
| ASTM G 156-1997 |
用于曝光试验中监测条件一致性的风化标准物质的选择与表征的标准操作规程 |
Standard Practice for Selecting and Characterizing Weathering Reference Materials Used to Monitor Consistency of Conditions in an Exposure Test |
| ASTM D 2095-1996 |
用棒和条状样品测定胶粘剂抗拉强度的标准试验方法 |
Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens |
| ASTM E 1891-1997 |
测定抗选定微生物的抗菌剂的生存曲线和计算D值及浓度系数的标准指南 |
Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient |
| ASTM F 1614-1999 |
运动鞋材料系统减震性能的标准试验方法 |
Standard Test Method for Shock Attenuating Properties of Materials Systems for Athletic Footwear |
| ASTM F 1593-1997 |
应用高质量分辩率辉光放电质谱计测定电子级铝中微量金属杂质的标准试验方法 |
Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer |
| ASTM E 1055-1999 |
在白化兔中眼刺激性评价的试验方法 |
Standard Test Method for Evaluation of Eye Irritation in Albino Rabbits |
| ASTM G 35-1998 |
不锈钢及有关镍铬铁合金在连多硫酸中应力腐蚀断裂灵敏性测定的标准实施规程 |
Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids |
| ASTM F 1513-1999 |
电子薄膜器件用纯铝(非合金)原材料标准规范 |
Standard Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin Film Applications |
| ASTM F 1051-2000 |
比较多次打击薄膜打字色带的标准试验方法 |
Standard Test Method for Comparing Multistrike Film Ribbons |
| ASTM F 1033-2000 |
比较去除型修改液消字灵的标准试验方法 |
Standard Test Method for Comparing Lift-Off Correction Media |
| ASTM E 506-1998 |
液氯中汞含量的试验方法 |
Standard Test Method for Mercury in Liquid Chlorine |
| ASTM E 497-1999 |
隔声.轻质隔断的安装 |
Standard Practice for Installing Sound-Isolating Lightweight Partitions |
| ASTM A 890/A 890M-1999 |
通用铁铬镍钼耐腐蚀双重(奥氏体/铁素体)铸件的标准规范 |
Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application |
| ASTM E 1580-1993 |
认可实验室监督的标准指南 |
Standard Guide for Surveillance of Accredited Laboratories |
| ASTM B 322-1999 |
电镀前金属清洗的标准实施规程 |
Standard Guide for Cleaning Metals Prior to Electroplating |
| ASTM B 545-1997 |
锡电解沉积层标准规范 |
Standard Specification for Electrodeposited Coatings of Tin |
| ASTM D 2482-1997 |
纸表面强度的标准试验方法(封蜡选择法) |
Standard Test Method for Surface Strength of Paper (Wax Pick Method) |
| ASTM D 6234-1998 |
通过合成沉淀漓滤过程对采矿废物的摇混提取的标准试验方法 |
Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure |
| ASTM D 6228-1998 |
用气相色谱和火焰光度检测对天然气和气态燃料中含硫化合物测定的标准试验方法 |
Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection |
| ASTM F 1844-1997 |
用非接触式涡流计测量平板显示器制造用薄膜导体耐力的标准操作规程 |
Standard Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel Display Manufacturing Using a Noncontact Eddy Current Gage |
| ASTM B 628-1998 |
银铜低共熔电触头合金标准规范 |
Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy |
| ASTM F 408-1999 |
测定拖挂车朝正前方制动时潮湿牵引用轮胎的试验方法 |
Standard Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using a Towed Trailer |
| ASTM D 6225-1998 |
矿物表面屋顶的颗粒覆盖的标准试验方法 |
Standard Test Method for Granule Cover of Mineral Surfaced Roofing |
| ASTM A 986/A 986M-1998 |
连续晶粒流动曲轴锻件的磁粒子检验标准规范 |
Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings |
| ASTM E 1912-1998 |
确认的或拟似石油释放的加速现场特性记述的标准指南 |
Standard Guide for Accelerated Site Characterization for Confirmed or Suspected Petroleum Releases |
| ASTM E 534-1998 |
氯化钠化学分析的试验方法 |
Standard Test Methods for Chemical Analysis of Sodium Chloride |
| ASTM C 875-1998 |
石棉水泥管道标准规范 |
Standard Specification for Asbestos-Cement Conduit |
| ASTM C 884/C 884M-1998 |
混凝土和环氧树脂涂层间热容性的标准试验方法 |
Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay |
| ASTM C 870-1996 |
热绝缘材料的调整的标准实施规程 |
Standard Practice for Conditioning of Thermal Insulating Materials |
| ASTM C 831-1998 |
含焦化硬沥青砖及异型砖的残余碳、表观残余碳及表观出碳量的标准试验方法 |
Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes |
| ASTM C 1059-1999 |
硬化混凝土保持新鲜用乳胶作用剂 |
Latex Agents for Bonding Fresh to Hardened Concrete |
| ASTM E 724-1998 |
用四种咸水双壳类软体动物幼虫进行的静态急性毒力试验的标准指南 |
Standard Guide for Conducting Static Acute Toxicity Tests Starting with Embryos of Four Species of Saltwater Bivalve Molluscs |
| ASTM G 47-1998 |
测定高强度铝合金制品应力腐蚀断裂敏感性的标准试验方法 |
Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products |
| ASTM D 6030-1996 |
评价地下水或含水层敏感性和脆弱性的方法选择标准指南 |
Standard Guide for Selection of Methods for Assessing Ground Water or Aquifer Sensitiviy and Vulnerability |
| ASTM D 6036-1996 |
地下水主要离子和痕量元素使用地图化学分析结果展示的标准指南 |
Standard Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements - Use of Maps |
| ASTM D 5045-1999 |
塑料材料平面应变断裂韧性和应变能量释放率的标准试验方法 |
Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials |
| ASTM C 886-1998 |
碳和石墨材料肖氏硬度试验的标准试验方法 |
Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials |
| ASTM C 287-1998 |
耐化学腐蚀硫化灰浆标准规范 |
Standard Specification for Chemical-Resistant Sulfur Mortar |
| ASTM C 283-1997 |
搪瓷器皿耐沸腾酸腐蚀的标准试验方法 |
Standard Test Method for Resistance of Porcelain Enameled Utensils to Boiling Acid |
| ASTM E 1428-1999 |
用轮枝链霉菌属网(粉红染色生物体)在防腐蚀聚合物中或聚合物上进行抗微生物性能评价的标准试验方法 |
Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptoverticillium reticulum (A Pink Stain Organism) |
| ASTM E 520-1998 |
放射和吸收光谱测定法中光电倍增检测器描述的标准实施规程 |
Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry |
| ASTM C 222-1997 |
石棉水泥屋面板的标准规范 |
Standard Specification for Asbestos-Cement Roofing Shingles |
| ASTM C 221-1998 |
石棉水泥波纹板标准规范 |
Standard Specification for Corrugated Asbestos-Cement Sheets |
| ASTM E 766-1998 |
校准扫描电子显微镜的放大倍数 |
Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope |
| ASTM E 758-1998 |
哺乳动物急性经皮毒性的试验方法 |
Standard Test Method for Mammalian Acute Percutaneous Toxicity |
| ASTM E 703-1998 |
有色金属的电磁(涡流)分类标准规程 |
Standard Practice for Electromagnetic (Eddy-Current) Sorting of Nonferrous Metals |
| ASTM F 1879-1998 |
演示搜寻和援救狗驯从和敏捷性的标准指南 |
Standard Guide for Demonstrating Obedience and Agility in Search and Rescue Dogs |
| ASTM F 1905-1998 |
选定测定材料产生抗毒性倾向的试验的标准操作规程 |
Standard Practice for Selecting Tests for Determining the Propensity of Materials to Cause Immunotoxicity |
| ASTM F 1906-1998 |
用酶标记免疫分析试验、淋巴细胞扩散和细胞移动评价生物配伍中免疫反应的标准操作规程 |
Standard Practice for Evaluation of Immune Responses In Biocompatibility Testing Using ELISA Tests, Lymphocyte, Proliferation, and Cell Migration |
| ASTM E 1643-1998 |
与混凝土板下土壤或粒状填料接触用水蒸汽阻滞剂的安放标准实施规范 |
Standard Practice for Installation of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs |
| ASTM F 1875-1998 |
模块植入接口的磨损侵蚀试验的标准操作规程:脊股骨孔和锥体锥形接口 |
Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-bore and Cone Taper Interface |
| ASTM E 346-1999 |
甲醇分析的试验方法 |
Standard Test Method for Analysis of Methanol |
| ASTM D 6230-1998 |
使用探针型倾斜仪检测地面运动的标准试验方法 |
Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers |
| ASTM D 6282-1998 |
环境位点特性分析用直推土壤采样的标准指南 |
Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations |
| ASTM D 6236-1998 |
取芯和测井水泥或石灰稳定土壤的标准指南 |
Standard Guide for Coring and Logging Cement - or Lime-Stabilized Soil |
| ASTM D 6248-1998 |
用红外线分光光度法对乙烯基和横相不饱和性的标准试验方法 |
Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry |
| ASTM F 1921-1998 |
构成挠性腹板密封表面的热塑聚合物和混合物的热封强度(热点焊焊缝)的标准试验方法 |
Standard Test Method for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs |
| ASTM F 1916-1998 |
选择拘役用带涂层链节栅栏结构和圆柱的链节栅栏系统的标准规范 |
Standard Specifications for Selecting Chain Link Barrier Systems With Coated Chain Link Fence Fabric and Round Posts for Detention Applications |
| ASTM D 6321-1998 |
可机洗的T恤衫评价的标准操作规程 |
Standard Practice for the Evaluation of Machine Washable T-Shirts |
| ASTM F 1912-1998 |
豆袋椅安全标准规范 |
Standard Specification for Safety of Bean Bag Chairs |
| ASTM D 6343-1999 |
电绝缘和电介质用薄导热固体材料的试验方法 |
Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications |
| ASTM F 2230-2002 |
水面漏油现场燃烧的标准指南:冻结条件 |
Standard Guide for In-situ Burning of Oil Spills on Water: Ice Conditions |
| ASTM E 810-2003 |
利用共面几何学测试反光板反射系数的标准试验方法 |
Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry |
| ASTM D 6224-2002 |
附属动力工厂设备用润滑油运行中检测的标准实施规程 |
Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment |
| ASTM D 6846-2002 |
用印刷仪的糊状印刷油墨印刷准备的标准实施规范 |
Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage |
| ASTM E 2254-2003 |
动态机械分析仪存储模数校正的标准试验方法 |
Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers |
| ASTM D 4789-2003 |
(4,4-二酚基丙烷)双酚A溶液颜色的标准试验方法 |
Standard Test Method for Solution Color of Bisphenol A (4,4′-Isopropylidenediphenol) |
| ASTM D 1403-2002 |
用1/4和1/2标度锥形设备测定润滑脂锥入度的标准试验方法 |
Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment |
| ASTM A 742/A 742M-2003 |
波纹钢管用预涂聚合物和金属涂覆钢薄板的标准规范 |
Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe |
| ASTM D 6790-2002 |
测定蜂窝状型芯子的泊松比的标准试验方法 |
Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores |
| ASTM D 6772-2002 |
夹层芯部材料尺寸稳定性的标准试验方法 |
Standard Test Method for Dimensional Stability of Sandwich Core Materials |
| ASTM G 4-2001 |
用现场设备进行腐蚀试验的标准指南 |
Standard Guide for Conducting Corrosion Tests in Field Applications |
| ASTM D 4849b-2002 |
与纱和纤维相关的标准术语 |
Standard Terminology Relating to Yarns and Fibers |
| ASTM/ISO 5362-2000 |
麻醉剂储存袋 |
Anaesthetic Reservoir Bags |
| ASTM D 6588-2002 |
轮胎棱疲劳的标准试验方法(盘式疲劳试验) |
Standard Test Method for Fatigue of Tire Cords (Disc Fatigue Test) |
| ASTM F 1177-2002 |
与急诊服务相关的标准术语 |
Standard Terminology Relating to Emergency Medical Services |
| ASTM F 1277-2002 |
用离子选择电极技术测定包装和衬垫材料中可沥虑氯化物的标准测试方法 |
Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique |
| ASTM D 6070-2002 |
预组装的电线和电缆用光壁可盘绕的聚乙烯(PE)管道物理特性的标准试验方法 |
Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable |
| ASTM D 6820-2002 |
次表面探查用时间域电磁法的使用标准指南 |
Standard Guide for Use of the Time Domain Electromagnetic Method for Subsurface Investigation |
| ASTM C 349-2002 |
水硬性水泥灰浆抗压强度的试验方法(使用棱柱体弯曲时破碎部分) |
Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure) |
| ASTM F 2116-2001 |
低强度和固定救生安全夹心绳的标准规范 |
Standard Specification for Low Stretch and Static Kernmantle Life Safety Rope |
| ASTM E 2209-2002 |
用原子发射光谱法分析高锰钢的标准试验方法 |
Standard Test Method for Analysis of High Manganese Steel Using Atomic Emission Spectrometry |
| ASTM E 1824-2002 |
拉力下热机械分析的玻璃转变温度分配的标准试验方法 |
Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis Under Tension |
| ASTM E 1838-2002 |
利用成人自愿者试验液体卫生洗手剂的去除病毒有效性的标准试验方法 |
Standard Test Method for Determining the Virus-Eliminating Effectiveness of Liquid Hygienic Handwash and Handrub Agents Using the Fingerpads of Adult Volunteers |
| ASTM E 1864-2002 |
周围建筑物和相关结构中涂料、尘土、空中悬浮微粒和土壤中铅的危害评估和评估质量系统的标准实施规范 |
Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and around Buildings and Related Structures |
| ASTM D 3597-2002 |
机织装饰物的标准规范 |
Standard Specification for Woven Upholstery Fabrics-Plain, Tufted, or Flocked |
| ASTM C 348-2002 |
水硬性水泥灰浆抗弯强度的标准试验方法 |
Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars |
| ASTM C 1539-2002 |
用液体闪烁计数法测定六氟化铀中锝-99的标准试验方法 |
Standard Test Method for Determination of Technetium-99 in Uranium Hexafluoride by Liquid Scintillation Counting |
| ASTM F 2184-2002 |
彩弹球障碍网安装的标准指南 |
Standard Guide for Installation of Paintball Barrier Netting |
| ASTM D 5590-2000 |
用加速的四周琼脂平面培养分析测定漆膜及有关涂层耐霉菌损坏的标准试验方法 |
Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay |
| ASTM D 4059-2000 |
气相色谱法分析无机绝缘油中多氯联苯含量的标准试验方法 |
Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography |
| ASTM E 1699-2000 |
建筑物和建筑系统估价分析标准操作规程 |
Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems |
| ASTM F 112-2000 |
包封衬垫密封性的标准试验方法 |
Standard Test Method for Sealability of Enveloped Gaskets |
| ASTM F 1358-2000 |
主要不是用于耐火的防护服用材料遇火效应的标准试验方法 |
Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance |
| ASTM C 508-2000 |
石棉水泥地下排水管的标准规范 |
Standard Specification for Asbestos-Cement Underdrain Pipe |
| ASTM G 125-2000 |
测量气体氧化剂中液体和固体材料着火极限的标准试验方法 |
Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants |
| ASTM B 774-2000 |
低熔点合金的标准规范 |
Standard Specification for Low Melting Point Alloys |
| ASTM B 819-2000 |
医用气体系统用无缝铜管的标准规范 |
Standard Specification for Seamless Copper Tube for Medical Gas Systems |
| ASTM B 417-2000 |
非高流动性金属粉末的表观密度的标准试验方法 |
Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel |
| ASTM D 2300-2000 |
在电应力和电离作用下绝缘液体放气的标准试验方法(改进的皮勒里法) |
Standard Test Method for Gassing of Insulating Liquids Under Electrical Stress and Ionization (Modified Pirelli Method) |
| ASTM F 2002-2001 |
麻醉与呼吸设备的相关标准术语 |
Standard Termninology Relating to Anesthesia and Respiratory Equipment |
| ASTM D 6632-2001 |
防污油漆中铜总量的标准试验方法 |
Standard Test Method for Total Copper in Antifouling Paints |
| ASTM D 4873-2001 |
土工合成卷形物和样品识别、储存和搬运的标准指南 |
Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples |
| ASTM D 4972-2001 |
土壤pH值的标准试验方法 |
Standard Test Method for pH of Soils |
| ASTM D 5255-2001 |
土壤和岩石检验人员认可的标准实施规程 |
Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock |
| ASTM E 1043-2000 |
牛奶和奶油检验用吸管标准规范 |
Standard Specification for Pipets, Milk and Cream Examination |
| ASTM E 1045-2000 |
沙式血红蛋白吸管标准规范 |
Standard Specification for Pipet, Sahli Hemoglobin |
| ASTM E 1189-2000 |
微型滴定管(科赫型)标准规范 |
Standard Specification for Micro-Burets (Koch Style) |
| ASTM F 1197-2000 |
防水拉门控制系统标准规范 |
Standard Specification for Sliding Watertight Door Control Systems |
| ASTM A 473-2001 |
不锈钢锻件标准规范 |
Standard Specification for Stainless Steel Forgings |
| ASTM D 6587-2000 |
用自动试验机测定纱线支数的标准试验方法 |
Standard Test Method for Yarn Number Using Automatic Tester |
| ASTM/ISO 14043-2000 |
环境管理.生物圈评定.生物圈解释 |
Environmental management - Life cycle assessment - Life cycle interpretation |
| ASTM D 3969-2001 |
EDTA法涂料催干剂中锆的标准试验方法 |
Standard Test Method for Zirconium in Paint Driers by EDTA Method |
| ASTM D 4501-2001 |
整体剪切方法对刚性基片间胶粘剂剪切强度的标准试验方法 |
Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method |
| ASTM D 2613-2001 |
EDTA法测定涂料催干剂中钙或锌的标准试验方法 |
Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method |
| ASTM D 3065-2001 |
气溶胶制器可燃性的标准试验方法 |
Standard Test Methods for Flammability of Aerosol Products |
| ASTM D 6622-2001 |
完全粘结的热铺增强防水系统应用的标准指南 |
Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems |
| ASTM F 2070-2000 |
压力和差动压力电及光纤换能器标准规范 |
Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic |
| ASTM D 6627-2001 |
冷沥青混合料挥发性馏份测定的标准试验方法 |
Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures |
| ASTM F 2051-2000 |
可植入的盐水填充的乳房假体标准规范 |
Standard Specification for Implantable Saline Filled Breast Prosthesis |
| ASTM E 1660a-1995 |
办公室工作用办公设备适用性标准分类 |
Standard Classification for Serviceability of an Office Facility for Support for Office Work |
| ASTM D 2176a-1997 |
用M.I.T.试验器测试纸的耐折度的标准试验方法 |
Standard Test Method for Folding Endurance of Paper by the M.I.T. Tester |
| ASTM E 2188-2002 |
绝缘玻璃部件性能的标准试验方法 |
Standard Test Method for Insulating Glass Unit Performance |
| ASTM D 6130a-1997 |
用感应耦合等离子体-原子发散光谱法测定发动机冷却剂中硅和其它元素的标准试验方法 |
Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
| ASTM D 4109a-1995 |
男人及男孩用机织连衣裤工作服、劳动布工作服、工装裤及车间涂层织物的标准性能规范 |
Standard Performance Specification for Mens and Boys Woven Coverall, Dungaree, Overall, and Shop-Coat Fabrics |
| ASTM A 633/A 633M-2001 |
正火的高强度低合金结构钢板标准规范 |
Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates |
| ASTM C 637a-1998 |
防辐射混凝土用集料的标准规范 |
Standard Specification for Aggregates for Radiation-Shielding Concrete |
| ASTM D 6421a-1999 |
Bench法评定电子口燃油喷射器结垢情况用汽车火花点燃式发动机燃油的标准试验方法 |
Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure |
| ASTM D 3212a-1996 |
使用弹性柔性密封料制的塑料排水管和污水管接头的标准规范 |
Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals |
| ASTM C 1520-2002 |
乳胶密封剂可涂性标准指南 |
Standard Guide for Paintability of Latex Sealants |
| ASTM F 806a-1999 |
叠层复合衬垫材料的可压缩性和复原性标准测试方法 |
Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials |
| ASTM F 451a-1999 |
丙烯酸骨胶结剂水泥标准规范 |
Standard Specification for Acrylic Bone Cement |
| ASTM D 878-2001 |
绝缘油中无机氯化物和硫酸盐的标准试验方法 |
Standard Test Method for Inorganic Chlorides and Sulfates in Insulating Oils |
| ASTM D 4448-2001 |
地下水位监测井采样标准指南 |
Standard Guide for Sampling Ground-Water Monitoring Wells |
| ASTM D 5726-1998 |
用热屋顶和防水屋顶用热塑性织物标准规范 |
Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing |
| ASTM F 1709-1997 |
电子薄膜用高纯度钛溅射靶机的标准规范 |
Standard Specification for High Purity Titanium Sputtering Targets for Electronic Thin Film Applications |
| ASTM B 745/B 745M-1997 |
下水道和排水系统用波纹铝管标准规范 |
Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains |
| ASTM C 240-1997 |
检验泡沫玻璃绝缘砖的的标准试验方法 |
Standard Test Methods of Testing Cellular Glass Insulation Block |
| ASTM C 223-1998 |
石棉水泥板壁标准规范 |
Standard Specification for Asbestos-Cement Siding |
| ASTM E 921-1997 |
出口包装的实验室装置 |
Standard Specification for Export Packaged Laboratory Apparatus |
| ASTM E 920-1997 |
商业包装的实验室装置 |
Standard Specification for Commercially Packaged Laboratory Apparatus |
| ASTM D 5729-1997 |
非织造织物厚度的标准试验方法 |
Standard Test Method for Thickness of Nonwoven Fabrics |
| ASTM C 282-1999 |
搪瓷耐酸的标准试验方法(柠檬酸斑点试验) |
Standard Test Method for Acid Resistance of Porcelain Enamels (Citric Acid Spot Test) |
| ASTM C 167-1998 |
毛毡或棉绒型绝热材料厚度和密度的标准试验方法 |
Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations |
| ASTM D 5725-1999 |
使用自动接触角测试仪测定覆盖材料表面湿润度和吸收性的标准试验方法 |
Standard Test Method for Surface Wettability and Absorbency of Sheeted Materials Using an Automated Contact Angle Tester |
| ASTM F 1817-1997 |
带式烘箱性能的标准试验方法 |
Standard Test Method for Performance of Conveyor Ovens |
| ASTM D 1107-1996 |
木材的乙醇甲苯可溶性标准试验方法 |
Standard Test Method for Ethanol-Toluene Solubility of Wood |
| ASTM D 6192-1998 |
女孩人体测量的标准表,尺码为7-16 |
Standard Tables of Body Measurements for Girls, Sizes 7 to 16 |
| ASTM F 1858-1998 |
户外用带有可调节背或活动靠背结构的多位塑料椅的标准性能要求 |
Standard Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use |
| ASTM D 3433-1999 |
粘结接头中胶粘剂的断裂强度的标准试验方法 |
Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints |
| ASTM D 4413-1998 |
测定工作场所空气中氧化乙烯的标准试验方法(碳管法) |
Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (Charcoal Tube Methodology) |
| ASTM D 6067-1996 |
环境定位特性用电子锥形透度计使用的标准指南 |
Standard Guide for Using the Electronic Cone Penetrometer for Environmental Site Characterization |
| ASTM E 1028-2000 |
用无重铬酸盐滴定分析法对铁矿石中总铁含量的试验方法 |
Test Method for Total Iron in Iron Ores by the Dichromate-Free Titrimetric Method |
| ASTM D 994-1998 |
混凝土用预制膨胀接缝填充料(沥青型)的标准规范 |
Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type) |
| ASTM D 4338-1997 |
用芯轴弯曲试验法测定承托粘结膜挠曲度的标准试验方法 |
Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend |
| ASTM D 5507-1999 |
毛细管柱/多维气相色谱法测定单体级氯乙烯中微量有机杂质的标准试验方法 |
Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography |
| ASTM D 6356-1998 |
用作屋顶防护涂层的铝乳化沥青的氢气体产生的标准试验方法 |
Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing |
| ASTM D 6354-1998 |
用于铝生产的碳阴极块的取样计划和芯取样的标准指南 |
Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production |
| ASTM F 1933-1998 |
插图说明背包式或登山用帐蓬触地面积的标准规范 |
Standard Specification for Illustrating the Footprint of a Backpacking or Mountaineering Tent |
| ASTM D 6365-1999 |
使用火花试验对土工膜缝的非破坏性试验的标准操作规程 |
Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test |
| ASTM D 3461-1997 |
硬沥青软化点的试验方法(米勒杯球法) |
Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method) |
| ASTM D 3496-1999 |
动态模量试验用沥青混合料样品制备的方法 |
Preparation of Bituminous Mixture Specimens for Dynamic Modulus Testing |
| ASTM F 1357-1999 |
全部腕关节植入物的标准规范 |
Standard Specification for Articulating Total Wrist Implants |
| ASTM F 1349-1998 |
来自微波感受器的非挥发性紫外线(UV)吸收可萃取物的标准试验方法 |
Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors |
| ASTM F 1263-1999 |
电子元件辐射试验中超限试验数据的分析 |
Standard Guide for Analysis of Overtest Data in Radiation Testing of Electronic Parts |
| ASTM E 1501-1999 |
可见度增强的行人用反光标志的夜间光学性能标准规范 |
Standard Specification for Nighttime Photometric Performance of Retroreflective Pedestrian Markings for Visibility Enhancement |
| ASTM E 1421-1999 |
傅里叶转换中红外线(FT-IR)光谱仪的性能描述和测量的标准实施规程:0级和1级试验 |
Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests |
| ASTM E 1402-1999 |
抽样的相关术语 |
Standard Terminology Relating to Sampling |
| ASTM D 889-1999 |
松香中挥发性油的标准试验方法 |
Standard Test Method for Volatile Oil in Rosin |
| ASTM D 865-1999 |
橡胶的空气中加热变质的标准试验方法(试管封闭法) |
Standard Test Method for Rubber-Deterioration by Heating in Air (Test Tube Enclosure) |
| ASTM D 1117-1999 |
无纺织物评价的标准指南 |
Standard Guide for Evaluating Nonwoven Fabrics |
| ASTM D 918-1999 |
纸和纸板的抗粘结性标准试验方法 |
Standard Test Method for Blocking Resistance of Paper and Paperboard |
| ASTM D 5292-1999 |
用高裂度核磁共振光谱法测定烃类油中芳香碳含量的标准试验方法 |
Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy |
| ASTM D 3532-1999 |
碳纤维环氧树脂预浸料坯凝固时间的标准试验方法 |
Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg |
| ASTM D 3531-1999 |
碳纤维环氧树脂预浸料坯的树脂流动性标准试验方法 |
Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg |
| ASTM D 2471-1999 |
活性热固树脂胶凝时间和最大放热温度的标准测试方法 |
Standard Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins |
| ASTM D 2336-1999 |
涂料厂对涂覆于木制品的涂层由液态至固态的标准指南 |
Standard Guide for Specifying Factory Applied Wood Coatings |
| ASTM G 63-1999 |
供氧设备用非金属材料的评定的标准指南 |
Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service |
| ASTM D 1201-1999 |
热固聚酯模制化合物的标准规范 |
Standard Specification for Thermosetting Polyester Molding Compounds |
| ASTM F 2029-2000 |
通过测量密封强度测定挠性网热密封性能用熔焊的标准实施规范 |
Standard Practices for Making Heatseals for Determination of Heatsealability of Flexible Webs as Measured by Seal Strength |
| ASTM D 6537-2000 |
包装性能测定用装配仪表的包装冲击试验的标准实施规程 |
Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance |
| ASTM D 5811-2000 |
测定水中锶-90的标准试验方法 |
Standard Test Method for Strontium-90 in Water |
| ASTM F 51-2000 |
无菌室内衣服上颗粒污物的粒度测量与计数标准试验方法 |
Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments |
| ASTM C 1467/C 1467M-2000 |
模制玻璃纤维增强石膏部件安装的标准规范 |
Standard Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts |
| ASTM B 842-1999 |
锌铁合金沉积物用电解镀层标准规范 |
Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits |
| ASTM D 6528-2000 |
粘性土的压密不排水直接样品剪切试验的标准试验方法 |
Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils |
| ASTM F 1941-2000 |
螺纹紧固件上电镀覆层的标准规范(统一英制螺纹)(UN/UNR) |
Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR)) |
| ASTM D 4018-1999 |
碳及石墨纤维束的连续长丝抗拉特性的标准试验方法 |
Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows |
| ASTM F 497-2000 |
作为试验工具用的电动打字机的使用的标准操作规程 |
Standard Practice for Use of the Electric and Electronic Typewriter as a Test Instrument |
| ASTM F 396-2000 |
一次性不能校准的打字机色带比较的标准操作规程 |
Standard Practice for Comparing One-Time Noncorrectable Typewriter Ribbons |
| ASTM D 1049-1998 |
橡胶绝缘封盖物 |
Rubber Insulating Covers |
| ASTM C 1392-1998 |
评价构造密封门窗玻璃破坏的标准指南 |
Standard Guide for Evaluating Failure of Structural Sealant Glazing |
| ASTM C 696-1999 |
核纯级二氧化铀粉末及丸的化学、质谱及光谱化学分析的标准试验方法 |
Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets |
| ASTM E 257-1998 |
用过氧化钠弹燃烧法测定有机化合物中硫含量的标准试验方法 |
Standard Test Method for Sulfur in Organic Compounds by Sodium Peroxide Bomb Ignition |
| ASTM D 6117-1997 |
塑料成材和形材内机械紧固件的标准试验方法 |
Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes |
| ASTM D 6157-1997 |
用于突然释放的油/水分离器性能测定的标准操作规程 |
Standard Practice for Determining the Performance of Oil/Water Separators Subjected to a Sudden Release |
| ASTM C 673-1997 |
耐火粘土及高矾土的塑性耐火材料及捣实混合物的标准分类 |
Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes |
| ASTM PS 111-1998 |
使用902至938MHz微波频带的专用短程通讯(DSRC)物理层的标准临时规范 |
Standard Provisional Specification for Dedicated Short Range Communication (DSRC) Physical Layer Using Microwave in the 902 to 938 MHz Band |
| ASTM D 586-1997 |
纸浆、纸和纸制品中灰分的标准试验方法 |
Standard Test Method for Ash in Pulp, Paper, and Paper Products |
| ASTM E 1943-1998 |
在石油释放场所根据自然衰减进行地下水补救的标准指南 |
Standard Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sites |
| ASTM A 980-1997 |
超高强度冷轧制碳素钢薄板标准规范 |
Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled |
| ASTM B 416-1998 |
同心绞捻包铝钢导线标准规范 |
Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors |
| ASTM D 644-1999 |
用炉烘干法测定纸和纸板中水分的标准试验方法 |
Standard Test Method for Moisture Content of Paper and Paperboard by Oven Drying |
| ASTM D 643-1997 |
用朔柏测试仪测试纸的折痕持久性的标准试验方法 |
Standard Test Method for Folding Endurance of Paper by the Schopper Tester |
| ASTM D 1318-2000 |
测定残留燃料油中钠的标准试验方法(火焰光度测定法) |
Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method) |
| ASTM D 876-2000 |
电绝缘用非硬质聚氯乙烯管的标准试验方法 |
Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation |
| ASTM D 1003-2000 |
透明塑料混浊度和透光系数的标准试验方法 |
Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM D 1488-2000 |
胶粘剂中淀粉物质的标准试验方法 |
Standard Test Method for Amylaceous Matter in Adhesives |
| ASTM D 1151-2000 |
潮气和温度对胶粘剂粘结能力影响的标准方法 |
Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds |
| ASTM D 1146-2000 |
有效粘结层粘结点的标准试验方法 |
Standard Test Method for Blocking Point of Potentially Adhesive Layers |
| ASTM D 1082-2000 |
云母耗散因数和电容率(介电常数)的标准试验方法 |
Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica |
| ASTM E 2099-2000 |
外墙系统预制造实验室模型规范和评定的标准实施规程 |
Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems |
| ASTM D 2671-2000 |
电气用热收缩管的标准试验方法 |
Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use |
| ASTM D 619-1999 |
电绝缘用硫化纤维的标准试验方法 |
Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation |
| ASTM D 295-1999 |
电绝缘用棉质漆布的标准试验方法 |
Standard Test Methods for Varnished Cotton Fabrics Used for Electrical Insulation |
| ASTM B 706-2000 |
无缝铜合金管标准规范 |
Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube |
| ASTM F 1608-2000 |
多孔包装材料的微生物分等标准试验方法(开放室法) |
Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method) |
| ASTM B 242-1999 |
电镀用高碳钢制备的标准实施规范 |
Standard Guide for Preparation of High-Carbon Steel for Electroplating |
| ASTM B 48-2000 |
电导体用矩形和正方形软裸铜线的标准规范 |
Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors |
| ASTM B 2-2000 |
中等硬度冷拉铜丝的标准规范 |
Standard Specification for Medium-Hard-Drawn Copper Wire |
| ASTM E 2078-2000 |
质谱数据的分析数据互换协议标准导则 |
Standard Guide for Analytical Data Interchange Protocol for Mass Spectrometric Data |
| ASTM A 1004/A 1004M-1999 |
冷轧成形构件用金属、涂有金属和无金属覆层的薄钢板符合最低腐蚀期望值的标准实施规程 |
Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members |
| ASTM F 809/F 809M-1995 |
大直径聚丁烯塑料管的标准规范 |
Standard Specification for Large Diameter Polybutylene Plastic Pipe |
| ASTM A 456/A 456M-1999 |
大型曲轴锻件的磁粉检查标准规范 |
Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings |
| ASTM D 3811/D 3811M-1996 |
压敏胶纸带解舒力的标准试验方法 |
Standard Test Method for Unwind Force of Pressure-Sensitive Tapes |
| ASTM B 841-1999 |
锌镍合金沉积物用电解镀层标准规范 |
Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits |
| ASTM D 2843-1999 |
塑料燃烧或分解所产生的烟雾密度的标准试验方法 |
Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics |
| ASTM E 2062-2000 |
PDD检查标准实施的标准导则 |
Standard Guide for PDD Examination Standards of Practice |
| ASTM E 2057-2000 |
性侵犯调查中实验室分析准备的标准规范 |
Standard Specifications for Preparation of Laboratory Analysis Requests in Sexual Assault Investigations |
| ASTM E 2052-1999 |
设施中铅危害的评价、管理和控制的标准指南 |
Standard Guide for Evaluation, Management, and Control of Lead Hazards in Facilities |
| ASTM D 2472-2000 |
六氟化硫的标准规范 |
Standard Specification for Sulfur Hexafluoride |
| ASTM D 2377-2000 |
填缝混合料及密封料消粘时间的标准试验方法 |
Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants |
| ASTM D 5101-1999 |
用降比法测量土壤-土工织物系统可能阻塞的标准试验方法 |
Standard Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio |
| ASTM E 806-1999 |
用直接注射法对液态氯中四氟化碳和三氯甲烷的标准试验方法(气相色谱程序) |
Standard Test Method for Carbon Tetrachloride and Chloroform in Liquid Chlorine by Direct Injection (Gas Chromatographic Procedure) |
| ASTM C 1465-2000 |
高温下用恒定应力速度挠曲试验测定高级陶瓷的慢裂增长系数的标准试验方法 |
Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures |
| ASTM E 2089-2000 |
太空用材料的地面实验室原子氧交互评价的标准规程 |
Standard Practices for Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space Applications |
| ASTM D 6536-2000 |
测定机械泵计量器浸入管长度的标准试验方法 |
Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser |
| ASTM E 985-2000 |
建筑物用永久性金属围栏系统和围栏的标准规范 |
Standard Specification for Permanent Metal Railing Systems and Rails for Buildings |
| ASTM E 935-2000 |
建筑物用永久金属围栏系统及围栏特性的标准试验方法 |
Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings |
| ASTM F 1995-2000 |
利用薄膜开关剪切力测定表面安装设备(SMD)粘着强度的标准试验方法 |
Standard Test Method for Determining the Bond Strength for a Surface Mount Device (SMD) by Applying Shear Force on a Membrane Switch |
| ASTM D 6530-2000 |
冷却塔水中总活性生物体的标准试验方法 |
Standard Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA) |
| ASTM D 6221-2000 |
屋顶和防水用增强沥青溢塑片的标准规范 |
Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing |
| ASTM E 2086-2000 |
INTERNET和INTRANET医疗保健安全的标准指南 |
Standard Guide for Internet and Intranet Healthcare Security |
| ASTM E 2084-2000 |
用数字符号鉴定医疗保健信息的标准规范 |
Standard Specification for Authentication of Healthcare Information Using Digital Signatures |
| ASTM F 2006-2000 |
非紧急出口和营救窗口用窗下落防护装置的标准安全规范 |
Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows |
| ASTM E 1083-2000 |
红辣椒热量的感官评定标准试验方法 |
Standard Test Method for Sensory Evaluation of Red Pepper Heat |
| ASTM F 603-2000 |
外科植入用高纯度密实氧化铝的标准规范 |
Standard Specification for High-Purity Dense Aluminum Oxide for Surgical Implant Application |
| ASTM E 736-2000 |
结构构件上喷涂的防火材料的粘附性/粘结性的标准试验方法 |
Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members |
| ASTM F 2035-2000 |
喷墨印刷品暗色稳定性测量的标准实施规范 |
Standard Practice for Measuring the Dark Stability of Ink Jet Prints |
| ASTM C 1474-2000 |
四极感应耦合等离子质谱法分析核纯级燃料中铀的同位素组分的标准试验方法 |
Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry |
| ASTM D 520-2000 |
锌粉颜料标准规范 |
Standard Specification for Zinc Dust Pigment |
| ASTM C 1135-2000 |
测定结构密封件的粘着抗拉强度特性的标准试验方法 |
Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
| ASTM C 1087-2000 |
测定门窗玻璃结构装置中与附件一同使用的液态密封料相容性的标准试验方法 |
Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
| ASTM C 908-2000 |
预制密封带的屈服强度的标准试验方法 |
Standard Test Method for Yield Strength of Preformed Tape Sealants |
| ASTM D 5576-2000 |
用付里叶变换红外光谱(FT-IR)法测定聚烯烃和聚烯烃共聚物结构实体的标准实施规程 |
Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR) |
| ASTM D 3800-1999 |
高模数纤维密度的标准试验方法 |
Standard Test Method for Density of High-Modulus Fibers |
| ASTM C 1452-2000 |
增强的热压处理过的加气混凝土构件的标准规范 |
Standard Specification for Reinforced Autoclaved Aerated Concrete Elements |
| ASTM D 6509-2000 |
用玻璃纤维加筋法测定无规立构聚丙烯改良沥青基薄板材的标准规范 |
Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements |
| ASTM E 1033-1998 |
在居里温度以上的F型连续焊接亚锰铁管的电磁(涡流)检验 |
Standard Practice for Electromagnetic (Eddy-Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature |
| ASTM B 885-1997 |
印刷线路板触点上存在杂质的标准试验方法 |
Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts |
| ASTM B 893-1998 |
工程应用硬涂层阳极氧化规范 |
Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications |
| ASTM D 6317-1998 |
通过紫外线,过硫酸盐氧化,和膜导检测对水中总碳,有机碳,无机碳低水平测定的标准试验方法 |
Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection |
| ASTM C 1271-1999 |
石灰和石灰岩X射线光谱分析标准试验方法 |
Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone |
| ASTM A 640-1997 |
8字型缆吊架用镀锌钢绞线的标准规范 |
Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable |
| ASTM D 76-1999 |
纺织材料的拉伸试验机 |
Tensile Testing Machines for Textiles |
| ASTM C 1312-1997 |
实验室中耐化学性硫聚合水泥固结试验样品制作和调合的标准规程 |
Standard Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory |
| ASTM C 1309-1997 |
内置穿过式金属检测器的性能评定的标准规程 |
Standard Practice for Performance Evaluation of In-Plant Walk-Through Metal Detectors |
| ASTM D 322-1997 |
蒸馏法测定汽油发动机废机油中汽油稀释剂的试验方法 |
Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation |
| ASTM D 3006-1999 |
氯乙烯塑料压敏电绝缘带 |
Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape |
| ASTM D 3005-1999 |
耐低温的氯乙烯塑料压敏电绝缘带 |
Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape |
| ASTM A 520-1997 |
符合ISO 锅炉结构推荐标准规定的高温用无缝和电阻焊碳素钢管形产品的补充要求 |
Supplementary Requirements for Seamless and Electric-Resistance-Welded Carbon Steel Tubular Products for High-Temperature Service Conforming to ISO Recommendations for Boiler Construction |
| ASTM D 113-1999 |
沥青材料延展性的试验方法 |
Test Method for Ductility of Bituminous Materials |
| ASTM E 1170-1997 |
车行道路面纵剖面图的摸拟行车响应曲线 |
Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces |
| ASTM E 1163-1998 |
评定剧毒口服灭鼠剂的试验方法 |
Standard Test Method for Estimating Acute Oral Toxicity in Rats |
| ASTM E 1129/E 1129M-1998 |
电热偶连接器 |
Standard Specification for Thermocouple Connectors |
| ASTM C 1238-1997 |
地下通道金属探测器的安装的标准指南 |
Standard Guide for Installation of Walk-Through Metal Detectors |
| ASTM D 6104-1997 |
主要用于表面流量的油/水分离器的性能测定的标准操作规程 |
Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off |
| ASTM E 1203-1998 |
含水毒理学中动物试验用作为受试食品的海水小虾类的标准规程 |
Standard Practice for Using Brine Shrimp Nauplii as Food for Test Animals in Aquatic Toxicology |
| ASTM D 2906-1997 |
织物精密度和偏差表的标准实施规程 |
Standard Practice for Statements on Precision and Bias for Textiles |
| ASTM D 2905-1997 |
纺织品样品的数值表的标准实施规程 |
Standard Practice for Statements on Number of Specimens for Textiles |
| ASTM D 202-1997 |
电绝缘用未浸渍纸的抽样和测试的标准试验方法 |
Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation |
| ASTM D 150-1998 |
固体电绝缘材料(恒定电介质)的交流损耗特性和介电常数的标准试验方法 |
Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation |
| ASTM D 2862-1997 |
粒状活性碳粒径分布的试验方法 |
Test Method for Particle Size Distribution of Granular Activated Carbon |
| ASTM D 5513-1999 |
痕量元素分析用工业炉供入液流的微波溶解标准操作规范 |
Standard Practice for Microwave Digestion of Industrial Furnace Feedstreams and Waste for Trace Element Analysis |
| ASTM E 1124-1997 |
用双面法现场测量声功率级的标准试验方法 |
Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method |
| ASTM D 3111-1999 |
用马德尔弯曲试验法测定热融胶挠性的试验方法 |
Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method |
| ASTM D 3064-1997 |
气溶胶制品的相关术语 |
Terminology Relating to Aerosol Products |
| ASTM D 3089-1997 |
测量气溶胶阀填料斜管A-D尺寸的标准操作规程 |
Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM C 1423-1998 |
隔热用封装材料选择的标准指南 |
Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
| ASTM D 6136-1997 |
用真空法对非饱和的(干的)毛毡的煤油数量测定的标准试验方法 |
Standard Test Method for Kerosene Number of Unsaturated (Dry) Felt by the Vacuum Method |
| ASTM PS 74-1998 |
用重量分析测定法测定水中油和润滑脂(溶解的可萃取物质)的临时标准试验方法 |
Provisional Standard Test Method for Oil and Grease (Solvent Extractable Substances) in Water by Gravimetric Determination |
| ASTM D 829-1997 |
纸和纸制品湿抗扯裂强度的标准试验方法 |
Standard Test Methods for Wet Tensile Breaking Strength of Paper and Paper Products |
| ASTM D 828-1997 |
用恒速拉伸设备进行纸和纸板抗扯裂强度的标准试验方法 |
Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus |
| ASTM D 3643-1998 |
某些碱溶性树脂酸值的试验方法 |
Test Method for Acid Number of Certain Alkali-Soluble Resins |
| ASTM D 3124-1998 |
用红外线光度分光光度法测定聚乙烯中乙烯不饱和性的试验方法 |
Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry |
| ASTM D 3123-1998 |
低压热固性模塑料螺旋形流动的试验方法 |
Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds |
| ASTM D 2989-1997 |
卤化有机溶剂及其掺合物酸碱度的测试方法 |
Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and Their Admixtures |
| ASTM D 3023-1998 |
工厂制木制品涂覆层耐着色性和耐试剂性测定的标准实施规范 |
Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents |
| ASTM D 3016-1997 |
液体排阻色谱法术语及其相互关系的使用的标准实施规程 |
Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships |
| ASTM D 6274-1998 |
进行钻孔地球物理岩芯记录-γ的标准指南 |
Standard Guide for Conducting Borehole Geophysical Logging-Gamma |
| ASTM D 2995-1999 |
测定沥青洒布机的使用速率的标准实施规程 |
Standard Practice for Estimating Application Rate of Bituminous Distributors |
| ASTM A 603-1998 |
镀锌结构钢绞线的标准规范 |
Standard Specification for Zinc-Coated Steel Structural Wire Rope |
| ASTM F 1903-1998 |
实验室测试粒子生物响应的标准操作规程 |
Standard Practice for Testing for Biological Responses to Particles In Vitro |
| ASTM F 1904-1998 |
测试体内粒子生物响应的标准操作规程 |
Standard Practice for Testing the Biological Responses to Particles In Vivo |
| ASTM D 128-1998 |
润滑脂的分析标准试验方法 |
Standard Test Methods for Analysis of Lubricating Grease |
| ASTM C 1247-1998 |
连续浸液的密封剂寿命标准试验方法 |
Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids |
| ASTM C 1237-1999 |
手持SNM监视器内部性能评定标准指南 |
Standard Guide to In-Plant Performance Evaluation of Hand-Held SNM Monitors |
| ASTM C 1236-1999 |
车辆自动SNM监视器的内部性能评定标准指南 |
Standard Guide for In-Plant Performance Evaluation of Automatic Vehicle SNM Monitors |
| ASTM E 788-1997 |
血液稀释移液管用标准规范 |
Standard Specification for Pipet, Blood Diluting |
| ASTM E 1456-1997 |
固体苛性钾(固体氢氧化钾) |
Standard Specification for Caustic Potash; Solid (Potassium Hydroxide; Solid) |
| ASTM D 6334-1998 |
波长分布X-射线荧光法测定汽油中硫的标准试验方法 |
Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence |
| ASTM D 6240-1998 |
尺寸为34至60的男性身体测量的标准表 |
Standard Tables of Body Measurements for Men Sizes Thirty-Four to Sixty (34 to 60) Regular |
| ASTM E 1576-1999 |
在空气碳化硅晶须和纤维的环境中工作的工作人员的医疗监督计划的标准指南 |
Standard Guide for Medical Surveillance Program for Workers with Occupational Exposure to Respirable Silicon Carbide Whiskers |
| ASTM F 1923-1998 |
非道路气动低速车辆轮胎的标准试验方法 |
Standard Test Method for Tires, Pneumatic, Low Speed, Off Highway |
| ASTM E 1994-1998 |
使用过程导向的平均质量检查最低限和批量允许不良率的抽样方案的标准操作规程 |
Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans |
| ASTM F 1878-1998 |
护航船评价和选择的标准指南 |
Standard Guide for Escort Vessel Evaluation and Selection |
| ASTM E 1985-1998 |
用户鉴定和授权标准指南 |
Standard Guide for User Authentication and Authorization |
| ASTM D 919-1997 |
纸和纸板铜值的标准测试方法 |
Standard Test Method for Copper Number of Paper and Paperboard |
| ASTM D 6247-1998 |
用X射线荧光度谱术对聚烯烃内元素含量分析的标准试验方法 |
Standard Test Method for Analysis of Elemental Content in Polyolefins By X-Ray Fluorescence Spectrometry |
| ASTM D 5957-1998 |
测试横向抗洪防水装置的标准指南 |
Standard Guide for Flood Testing Horizontal Waterproofing Installations |
| ASTM A 47/A 47M-1999 |
铁素体可锻铸铁铸件的标准规范 |
Standard Specification for Ferritic Malleable Iron Castings |
| ASTM D 6382-1999 |
屋顶和防水屋顶膜材料的热重力和动态机械分析的标准操作规程 |
Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material |
| ASTM G 142-1998 |
测定金属在氢气中(包括高压、高温或高压高温条件下)脆性敏感度的标准试验方法 |
Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both |
| ASTM D 3642-1998 |
某些碱溶性树脂软化点的试验方法 |
Test Method for Softening Point of Certain Alkali-Soluble Resins |
| ASTM D 3634-1999 |
测定发动机冷却剂中痕量氯离子的试验方法 |
Standard Test Method for Trace Chloride Ion in Engine Coolants |
| ASTM B 567-1998 |
用β射线反向散射法测定覆层厚度的标准试验方法 |
Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method |
| ASTM B 552-1998 |
水淡化厂用无缝和焊接铜/镍管标准规范 |
Standard Specification for Seamless and Welded Copper--Nickel Tubes For Water Desalting Plants |
| ASTM B 524/B 524M-1999 |
铝合金芯加强的同心绞捻铝导线标准规范 |
Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201) |
| ASTM B 521-1998 |
钽和钽合金无缝和焊接管标准规范 |
Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes |
| ASTM D 3567-1997 |
增强热固树脂管及配件的尺寸测定规程 |
Standard Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings |
| ASTM D 4715-1998 |
测定焦油和硬沥青焦化值的试验方法(Alcan) |
Standard Test Method for Coking Value of Tar and Pitch (Alcan) |
| ASTM B 568-1998 |
用X射线光度法测定覆层厚度的标准试验方法 |
Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry |
| ASTM D 4669-1998 |
聚氨酯原材料的标准试验方法:多元醇比重的测定 |
Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols |
| ASTM D 4490-1996 |
用检测器管测量有毒气体或蒸气浓度的标准实施规程 |
Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes |
| ASTM D 6402-1999 |
植物性单宁材料提取中测定可溶固体和非溶解物的标准试验方法 |
Standard Test Method for Determing Soluble Solids and Insolubles in Extracts of Vegetable Tanning Materials |
| ASTM D 6403-1999 |
原材料和用过的材料中测定潮气的标准试验方法 |
Standard Test Method for Determining Moisture in Raw and Spent Materials |
| ASTM E 1342-1997 |
用冷冻、冷冻干燥和低温养护法保存细菌、真菌、原生生物、病毒、遗传要素以及动物和植物组织的标准实施规程 |
Standard Practice for Preservation by Freezing, Freeze-Drying, and Low Temperature Maintenance of Bacteria, Fungi, Protista, Viruses, Genetic Elements, and Animal and Plant Tissues |
| ASTM E 1338-1997 |
计算机化材料特性数据库的金属和合金的识别 |
Guide for Identification of Metals and Alloys in Computerized Material Property Databases |
| ASTM E 1319-1998 |
高温变形测量 |
Standard Guide for High-Temperature Static Strain Measurement |
| ASTM E 1312-1999 |
居里温度以上铁磁圆柱棒产品的电磁(涡流)检验 |
Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature |
| ASTM D 4363-1998 |
电线和电缆用热塑氯化聚乙烯套管规格标准规范 |
Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable |
| ASTM D 4361-1997 |
用铀墨粘度计测定印刷油墨和媒液表观粘度的标准试验方法 |
Standard Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Roller Tackmeter |
