| 标准号 |
中文名 |
英文名 |
| ASTM D 2766-1995 |
液体和固体比热的标准试验方法 |
Standard Test Method for Specific Heat of Liquids and Solids |
| ASTM D 891-1995 |
液态工业化合物的比重,表观比重的标准试验方法 |
Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals |
| ASTM A 802/A 802M-1995 |
钢铸件外观检验的表面验收标准的标准操作规程 |
Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination |
| ASTM D 3837-1995 |
碱性可溶树脂溶液制备的标准实施规程 |
Standard Practice for Preparing a Solution of Alkali-Soluble Resins |
| ASTM D 4316-1995 |
弹性水瓶标准规范 |
Standard Specification for Elastomeric Water Bottles |
| ASTM E 309-1995 |
用磁饱和法做管状钢产品涡流检验的标准实施规范 |
Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation |
| ASTM C 1190-1995 |
碳酸镁和焙烧浸渍的碱性砖试样配置的标准实施规程 |
Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick |
| ASTM D 1519-1995 |
橡胶化学制品熔化范围的标准试验方法 |
Standard Test Method for Rubber Chemicals-Melting Range |
| ASTM B 3-1995 |
软的或退火的铜线的标准规范 |
Standard Specification for Soft or Annealed Copper Wire |
| ASTM F 1663-1995 |
测定薄膜开关电阻的标准试验方法 |
Standard Test Method for Determining the Capacitance of a Membrane Switch |
| ASTM D 3608-1995 |
用griss-saltzman反应法测定大气中氧化氮(结合)含量的标准试验方法 |
Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction |
| ASTM E 850-1995 |
作结构填料的无机处理废物的使用 |
Standard Practice for Use of Inorganic Process Wastes as Structural Fill |
| ASTM D 5860-1995 |
评定防水处理对水硬水泥灰浆样品耐冷冻影响的标准试验方法 |
Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens |
| ASTM E 1168-1995 |
核设施工人辐射防护训练 |
Standard Guide for Radiological Protection Training for Nuclear Facility Workers |
| ASTM B 595-1995 |
烧结铝结构部件标准规范 |
Standard Specification for Sintered Aluminum Structural Parts |
| ASTM B 809-1995 |
用湿硫黄蒸气("硫黄华")作金属涂层中孔隙率测试的标准试验方法 |
Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor ("Flowers-of-Sulfur") |
| ASTM F 1571-1995 |
由办公复制品产生的图象抗磨抗污性能测定的标准试验方法(萨瑟兰法) |
Standard Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Sutherland Method) |
| ASTM D 5815-1995 |
用液相色谱法测定单面低密度聚乙烯酚氧化剂和掺合剂的标准试验方法 |
Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Linear Low-Density Polyethylene Using Liquid Chromatograph (LC) |
| ASTM A 942-1995 |
离心铸造白口铁/灰铸铁双金属耐磨擦滚动外壳的标准规范 |
Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells |
| ASTM F 1656-1995 |
美国溢油应答人员保健与安全培训标准指南 |
Standard Guide for Health and Safety Training of Oil Spill Responders in the United States |
| ASTM E 1510-1995 |
气相色谱仪中安装熔凝硅石开管状毛细管丛的标准实施规程 |
Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs |
| ASTM B 515-1995 |
焊接的UNS N08120、UNS NO8800、UNS N08810和UNS NO8811合金管标准规范 |
Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes |
| ASTM B 360-1995 |
限流器用冷拉铜毛细管标准规范 |
Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications |
| ASTM C 647-1995 |
胶合辅料和涂覆品的性能及试验标准指南 |
Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation |
| ASTM D 5734-1995 |
用落锤式织物撕裂强力测试仪测定非毛织品的撕裂强度的标准试验方法 |
Standard Test Method for Tearing Strength of Nonwoven Fabrics by Falling-Pendulum (Elmendorf) Apparatus |
| ASTM B 116-1995 |
工业运输用9号深槽铜及8号铜制电车架空线的标准规范 |
Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage |
| ASTM D 5709-1995 |
焦油的筛析的标准试验方法 |
Standard Test Method for Sieve Analysis of Petroleum Coke |
| ASTM D 5806-1995 |
用滴定计滴定法测定氨基盐消毒要素的标准试验方法 |
Standard Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration |
| ASTM G 42-1996 |
在高温条件下管道覆层阴极剥离合作用的试验方法 |
Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures |
| ASTM D 2852-1995 |
苯乙烯橡胶(SR)塑料排水管及配件标准规范 |
Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings |
| ASTM D 1534-1995 |
用比色指示剂滴定法测定电绝缘液近似酸度的标准试验方法 |
Standard Test Method for Approximate Acidity in Electrical Insulating Liquids by Color-Indicator Titration |
| ASTM D 5785-1995 |
通过低阻尼井回应顶部瞬间改变(定容积瞬息提水或注水试验)测定非越流性承压含水层透射率的(分析程序)标准试 |
Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test) |
| ASTM D 3015-1995 |
塑料化合物的颜料分散的显微检验标准实施规程 |
Standard Practice for Microscopical Examination of Pigment Dispersion in Plastic Compounds |
| ASTM D 3912-1995 |
轻水核电站用涂层耐化学性的标准试验方法 |
Standard Test Method for Chemical Resistance of Coatings Used in Light-Water Nuclear Power Plants |
| ASTM D 3856-1995 |
从事水取样和分析的实验室中优秀实验室规程的标准指南 |
Standard Guide for Good Laboratory Practices in Laboratories Engaged in Sampling and Analysis of Water |
| ASTM D 5835-1995 |
自动售货机的固定放射源抽样的集气测定的标准试验 |
Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations |
| ASTM D 5794-1995 |
用离子色谱法测定电离子镀层渗透率的标准导则 |
Standard Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography |
| ASTM D 5788-1995 |
有机物在水中样本的峰值标准导则 |
Standard Guide for Spiking Organics into Aqueous Samples |
| ASTM D 5801-1995 |
沥青材料粘油和挠性的标准试验方法 |
Standard Test Method for Toughness and Tenacity of Bituminous Materials |
| ASTM F 1629-1995 |
建立外科手术的急救医疗服务和管理信息系统或二者同时建立的标准导则 |
Standard Guide for Establishing Operating Emergency Medical Services and Management Information Systems, or Both |
| ASTM B 137-1995 |
阳极镀铝层重量测定的标准试验方法 |
Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum |
| ASTM F 1626-1995 |
船上防火控制准备的标准规范 |
Standard Practice for Preparing Shipboard Fire Control Plans |
| ASTM F 1615-1995 |
五加仑顶端开口塑料容器用警示标签的标准规范 |
Standard Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers |
| ASTM B 650-1995 |
铁基物上电沉积工程镀铬层标准规范 |
Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates |
| ASTM D 1509-1995 |
碳黑加热损耗的标准测试方法 |
Standard Test Methods for Carbon Black-Heating Loss |
| ASTM D 1125-1995 |
水的电导性和电阻率的标准试验方法 |
Standard Test Methods for Electrical Conductivity and Resistivity of Water |
| ASTM C 1307-1995 |
用(III)钚数组分光光度法鉴定钚的标准测试方法 |
Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry |
| ASTM D 4998-1995 |
评定牵引车液压液磨损特性的标准试验方法 |
Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids |
| ASTM D 4981-1995 |
在废弃物中筛选氧化剂的标准试验方法 |
Standard Test Method for Screening of Oxidizers in Waste |
| ASTM F 1262M-1995 |
数字集成电路瞬态辐射破坏阈试验标准指南 |
Standard Guide for Transient Radiation Upset Threshold of Digital Integrated Circuits |
| ASTM D 4780-1995 |
用多点氪吸附法测定催化剂的低表面面积的标准试验方法 |
Standard Test Method for Determination of Low Surface Area of Catalysts by Multipoint Krypton Adsorption |
| ASTM D 4626-1995 |
气相色谱响应因子计算的标准实施规程 |
Standard Practice for Calculation of Gas Chromatographic Response Factors |
| ASTM D 4600-1995 |
工作场所大气中苯可溶颗粒物质测定的标准试验方法 |
Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres |
| ASTM E 1741-1995 |
原子光谱分析用放射性强度衰减时空气中微粒铅样品制备的标准规程 |
Standard Practice for Preparation of Airborne Particulate Lead Samples Collected During Abatement and Construction Activities for Subsequent Analysis by Atomic Spectrometry |
| ASTM D 2454-1995 |
测定烘焙过度对有机涂层的影响的标准操作规程 |
Standard Practice for Determining the Effect of Overbaking on Organic Coatings |
| ASTM E 1364-1995 |
用静态水平仪法测量道路不平度的测试方法 |
Standard Test Method for Measuring Road Roughness by Static Level Method |
| ASTM D 6-1995 |
油及沥青混合物加热损失标准试验方法 |
Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds |
| ASTM C 188-1995 |
水硬性水泥密度的标准试验方法 |
Standard Test Method for Density of Hydraulic Cement |
| ASTM D 1029-1995 |
纸和纸板的抗剥离标准试验方法 |
Standard Test Method for Peeling Resistance of Paper and Paperboard |
| ASTM G 148-1997 |
用电化学技术评价金属中氢吸取、渗透和运输的标准操作规程 |
Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique |
| ASTM F 1797-1998 |
绝缘采掘式起重机声音发射试验的标准试验方法 |
Standard Test Method for Acoustic Emission Testing of Insulated Digger Derricks |
| ASTM G 150-1999 |
电化学临界点蚀温度的标准试验方法 |
Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels |
| ASTM F 1754-1997 |
海上船支结构检验依据的标准指南 |
Standard Guide for Marine Vessel Structural Inspection Considerations |
| ASTM F 1093-1999 |
漏油治理水域拦油栅的抗拉强度特性的标准试验方法 |
Standard Test Methods for Tensile Strength Characteristics of Oil Spill Response Boom |
| ASTM F 1075-1997 |
船上自带机械制冷减湿器的标准规范 |
Standard Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self-Contained |
| ASTM E 1859-1997 |
用可变滑动技术测量轮胎和路面之间摩擦系数的标准试验方法 |
Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique |
| ASTM D 6191-1997 |
由可水减的空气干燥涂层离析的甲醛的测量的标准试验方法 |
Standard Test Method for Measurement of Evolved Formaldehyde from Water Reducible Air-Dry Coatings |
| ASTM D 6186-1998 |
利用压差扫描量热法(PDSC)测试润滑油的氧化感应时间的标准试验方法 |
Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC) |
| ASTM D 6150-1997 |
由于挥发导致的塑料溶胶和有机溶胶的估计加工损失的标准试验方法 |
Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility |
| ASTM D 6123/D 6123M-1997 |
轻载包装和一般遮蔽用途的压敏带的标准规范 |
Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking |
| ASTM F 1099M-1998 |
船用米制雷达警戒装置的标准规范 |
Standard Specification for Rat Guards, Ship's (Metric) |
| ASTM D 6312-1998 |
地下水探测监测程序用开发适当的统计近似值的标准指南 |
Standard Guide for Developing Appropriate Statistical Approaches for Ground-Water Detection Monitoring Programs |
| ASTM C 1404/C 1404M-1998 |
用直接拉力测量与混凝土一起使用的胶粘系统的粘合强度的标准试验方法 |
Standard Test Method for Bond Strength of Adhesive Systems Used with Concrete as Measured by Direct Tension |
| ASTM D 6386-1999 |
锌(热浸镀的)涂覆的铁和钢产品和用于喷涂的五金制品表面准备的标准操作规程 |
Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting |
| ASTM D 5984-1997 |
利用显色指示剂滴定法测试新的和已用过的润滑剂碱值的半定量现场试验法的标准试验方法 |
Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration |
| ASTM D 6416-1999 |
用于分配负载的单支撑三层化合板的二维柔韧特性的标准试验方法 |
Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load |
| ASTM D 5732-1995 |
用悬臂试验对非机织织物坚固性的标准试验方法 |
Standard Test Method for Stiffness of Nonwoven Fabrics Using the Cantilever Test |
| ASTM F 1423-1997 |
非冲击式个人计算机打印机的单色成像质量测定的标准操作规程 |
Standard Practice for Determination of the Quality of Monochrome Images Produced from Non-Impact Personal Computer Printers |
| ASTM D 2320-1998 |
固态沥青比重(表面引力)的标准试验方法(比重瓶法) |
Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method) |
| ASTM D 4630-1996 |
用恒定水头喷射试验现场测定低渗透性岩石的透过比和释水系数的标准试验方法 |
Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test |
| ASTM D 4610-1998 |
测定涂料和相关涂层上微生物(真菌或藻类)的存在及清除的标准指南 |
Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings |
| ASTM D 4754-1998 |
使用液膜蒸馏器(FDA)移动元件进行塑料材料双侧液体提取的标准试验方法 |
Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell |
| ASTM D 4680-1998 |
用压缩负荷静剪切法法测定胶粘剂蠕变和老化时间的标准试验方法(木材对木材) |
Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
| ASTM D 4670-1997 |
聚氨酯原材料的标准试验方法:多元醇中悬浮物的测定 |
Standard Test Method for Polyurethane Raw Materials Determination of Suspended Matter In Polyols |
| ASTM E 1616-1994 |
用气相色谱法分析乙酸酐的标准试验方法 |
Standard Test Method for Analysis of Acetic Anhydride Using Gas Chromatography |
| ASTM D 5007-1999 |
涂漆的湿到干遮盖变化的标准试验方法 |
Standard Test Method for Wet-to-Dry Hiding Change |
| ASTM D 4987-1999 |
一部分连续式纸张孔眼的拉伸断裂强度的标准试验方法 |
Standard Test Method for Tensile Breaking Strength of Perforations in One-Part Continuous Forms Paper |
| ASTM D 4241-1998 |
气体涡轮发电机润滑油系统设计的标准实施规范 |
Standard Practice for Design of Gas Turbine Generator Lubricating Oil Systems |
| ASTM D 5671-1995 |
在显微镜下用反射光法人分析煤抛光和腐蚀性的标准实验 |
Standard Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light |
| ASTM F 1644-1995 |
溢油应答人员的保健与安全培训标准指南 |
Standard Guide for Health and Safety Training of Oil Spill Responders |
| ASTM D 3259-1995 |
红外线测定木制品涂层固化期间温度的标准实施规程 |
Standard Practice for Infrared Determination of the Temperature of Applied Coatings on Wood Products During the Curing Cycle |
| ASTM E 1733-1995 |
实验室试验照明标准指南 |
Standard Guide for Use of Lighting in Laboratory Testing |
| ASTM D 4978-1995 |
在废弃物中筛选活性硫化物的标准试验方法 |
Standard Test Methods for Screening of Reactive Sulfides in Waste |
| ASTM C 1318-1995 |
烟道气体脱硫用石灰中的可溶解钙、氧化镁总中合能力的标准测定方法 |
Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD) |
| ASTM E 556-1995 |
用校准平台(用户水平仪)校准车轮力或转矩传感仪的试验方法 |
Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level) |
| ASTM E 499-1995 |
探测器探针方式用质谱仪检漏器检漏的试验方法 |
Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode |
| ASTM C 92-1995 |
耐火材料筛析和含水量的标准试验方法 |
Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
| ASTM D 5799-1995 |
丁二烯中过氧化物测定的标准试验方法 |
Standard Test Method for Determination of Peroxides in Butadiene |
| ASTM D 5795-1995 |
硬质纤维板和其它混合板的吸水率测定的标准试验方法 |
Standard Test Method for Determination of Liquid Water Absorption of Coated Hardboard and Other Composite Wood Products Via "Cobb Ring" Apparatus |
| ASTM D 3278-1996 |
小刻度闭杯装置测定液体闪点的标准试验方法 |
Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
| ASTM D 3269-1996 |
大气和植物组织中氟化物含量分析的标准试验方法(人工法) |
Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Manual Procedures) |
| ASTM D 1108-1996 |
木材中二氯甲烷溶解物的标准试验方法 |
Standard Test Method for Dichloromethane Solubles in Wood |
| ASTM D 1106-1996 |
木材中酸不溶木素的标准试验方法 |
Standard Test Method for Acid-Insoluble Lignin in Wood |
| ASTM D 3286-1996 |
等温弹式量热器测定煤和焦炭总热值的试验方法 |
Test Method for Gross Calorific Value of Coal and Coke by the Isoperibol Bomb Calorimeter |
| ASTM D 5911-1996 |
标识土壤抽样基地用数据单元最低设置的标准实施规程 |
Standard Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site |
| ASTM C 1323-1996 |
环境温度下径向压缩C环样品的高级陶瓷的极限强度的标准试验方法 |
Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature |
| ASTM D 3210-1995 |
水乳化地板抛光剂膜的颜色比较标准试验方法 |
Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes |
| ASTM F 44-1995 |
陶瓷的金属化表面 |
Standard Specification for Metallized Surfaces on Ceramic |
| ASTM F 30-1996 |
铁镍密封合金标准规范 |
Standard Specification for Iron-Nickel Sealing Alloys |
| ASTM D 3193-1996 |
乙苯标准规范 |
Standard Specification for Ethylbenzene |
| ASTM D 5924-1996 |
地质现场调查中模拟近似法选择的标准导则 |
Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations |
| ASTM A 125-1996 |
热处理螺旋形钢弹簧的标准规范 |
Standard Specification for Steel Springs, Helical, Heat-Treated |
| ASTM E 915-1996 |
残余应力测量用X射线衍射仪校准检定的测试方法 |
Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement |
| ASTM F 111-1996 |
钡闪光消气剂的钡收获率、消气剂吸气量和消气剂吸着(能)力测定的标准规程 |
Standard Practice for Determining Barium Yield, Getter Gas Content, and Getter Sorption Capacity for Barium Flash Getters |
| ASTM F 73-1996 |
电子器件及灯泡用钨铼合金丝 |
Standard Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps |
| ASTM D 1571-1995 |
石棉布的标准规范 |
Standard Specification for Woven Asbestos Cloth |
| ASTM D 1546-1996 |
透明地板密封剂的性能试验的标准操作规程 |
Standard Practice for Testing the Performance of Clear Floor Sealers |
| ASTM D 2968-1995 |
用显微投影法测定羊毛和其它动物纤维中的有髓纤维和死毛纤维的标准试验方法 |
Standard Test Method for Med and Kemp Fibers in Wool and Other Animal Fibers by Microprojection |
| ASTM F 1115-1995 |
测定饮料容器二氧化碳损失的标准试验方法 |
Standard Test Method for Determining the Carbon Dioxide Loss of Beverage Containers |
| ASTM F 1220-1995 |
应急医疗服务系统(EMSS)远程通信 |
Standard Guide for Emergency Medical Services System (EMSS) Telecommunications |
| ASTM D 5839-1996 |
能量发散X射线荧光光谱法分析危险废油中痕量元素的标准试验方法 |
Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry |
| ASTM G 107-1995 |
计算机化数据库输入用金属腐蚀数据的采集和编辑格式 |
Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input |
| ASTM F 1588-1996 |
恒定拉伸载荷连接试验的标准试验方法 |
Standard Test Method for Constant Tensile Load Joint Test (CTLJT) |
| ASTM D 1975-1995 |
塑料注模开口桶抗环境应力断裂的标准试验方法 |
Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails |
| ASTM D 1999-1996 |
国际贸易的样品和测试参数的选择 |
the Selection of Specimens and Test Parameters for International Commerce |
| ASTM F 615M-1995 |
测定在半导体元件上喷镀金属的安全电流脉冲操作区域的标准实施规范(米制) |
Standard Practice for Determining Safe Current Pulse-Operating Regions for Metallization on Semiconductor Components [Metric] |
| ASTM D 5933-1996 |
木结构用直径为25/8 英寸和4 英寸的金属剪切板的标准规范 |
Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions |
| ASTM F 1552-1994 |
急救医疗调度员的教师资格培训和鉴定合格标准实施规范 |
Standard Practice for Training Instructor Qualification and Certification Eligibility of Emergency Medical Dispatchers |
| ASTM F 1623-1996 |
有关热成像制品的术语 |
Standard Terminology Relating to Thermal Imaging Products |
| ASTM D 5962-1996 |
评定核反应堆的 I 级区域内连续不合格涂层(油漆)标准指南 |
Standard Guide for Maintaining Unqualified Coatings (Paints) Within Level I Areas of a Nuclear Power Facility |
| ASTM D 5959-1996 |
油漆刷丝分布密度的标准试验方法 |
Standard Test Method for Bulk Density of Level Paintbrush Filaments |
| ASTM D 5953M-1996 |
利用低温预浓缩和直接火焰检测法测定周围空气中非甲烷有机化合物(NMOC)的标准测试方法(米制的) |
Standard Test Method for Determination of Non-Methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection Method (Metric) |
| ASTM D 5931-1996 |
用数字密度计对发动机冷冻剂的浓缩和水般的发动机冷冻剂的标准测试方法 |
Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter |
| ASTM D 2439-1996 |
精炼苯酚的标准规范 |
Standard Specification for Refined Phenol |
| ASTM D 5916-1996 |
用薄膜过滤法从水和萃取沉淀物中检测和计算产气荚膜梭菌的标准试验方法 |
Standard Test Method for Detection and Enumeration of Clostridium perfringens from Water and Extracted Sediments by Membrane Filtration (MF) |
| ASTM D 5912-1996 |
通过超阻尼井回应顶部的瞬息变化测定自由含水层液压导电率的分析程序的标准试验方法 |
Standard Test Method for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug) |
| ASTM D 2570-1996 |
发动机冷却剂的模拟使用腐蚀的标准试验方法 |
Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants |
| ASTM D 2561-1995 |
吹模制聚乙烯容器抗环境应力裂纹的标准试验方法 |
Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers |
| ASTM D 2685-1995 |
用气体色层分离法对六氟化硫中空气和四氟化碳含量的标准试验方法 |
Standard Test Method for Air and Carbon Tetrafluoride in Sulfur Hexafluoride by Gas Chromatography |
| ASTM D 2684-1995 |
包装试剂或专利产品的热塑容器的渗透率的标准试验方法 |
Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products |
| ASTM D 3504-1996 |
顺丁烯二酐标准规范 |
Standard Specification for Maleic Anhydride |
| ASTM D 3479/D 3479M-1996 |
聚合母体混合料拉伸疲劳度的标准试验方法 |
Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials |
| ASTM D 3464-1996 |
热风风速计测量导管中平均速率的标准试验方法 |
Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer |
| ASTM G 134-1995 |
用气蚀喷液法测试固体材料腐蚀的标准试验方法 |
Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet |
| ASTM D 2091-1996 |
喷漆的抗印迹性的标准试验方法 |
Standard Test Method for Print Resistance of Lacquers |
| ASTM D 729-1995 |
偏二氯乙烯模塑化合物 |
Vinylidene Chloride Molding Compounds |
| ASTM D 2392-1996 |
着色航空汽油的颜色的标准试验方法 |
Standard Test Method for Color Of Dyed Aviation Gasolines |
| ASTM D 2284-1995 |
六氟化硫酸度的标准测试方法 |
Standard Test Method for Acidity of Sulfur Hexafluoride |
| ASTM D 5913-1996 |
油漆刷除尘度评定的标准试验方法 |
Standard Test Method for Evaluation of Cleanability of Paint Brushes |
| ASTM D 2616-1996 |
用灰度标评定颜色变化的标准试验方法 |
Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale |
| ASTM D 1045-1995 |
塑料用增塑剂的取样的标准试验方法 |
Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics |
| ASTM D 2595-1996 |
过宽温度范围内润滑油蒸发损失的标准试验方法 |
Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range |
| ASTM D 727-1996 |
真空方法测定屋顶和地板油毡煤油值的标准试验方法 |
Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method |
| ASTM F 1612-1995 |
有转矩的金属带柄臀部关节成形术股骨元件的循环疲劳试验标准实施规程 |
Standard Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty Femoral Components with Torsion |
| ASTM F 1613-1995 |
外科用组织/敷料/检出钳标准规范(拇指型) |
Standard Specification for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb Type) |
| ASTM D 1227-1995 |
屋面保护涂层用乳化沥青的标准规范 |
Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing |
| ASTM F 1690-1996 |
医用加湿器的标准规范.第1部分:自动加湿系统的一般要求 |
Standard Specification for Humidifiers for Medical Use - Part 1: General Requirements for Active Humidification Systems |
| ASTM F 1638-1995 |
外科用纱/敷料/检出钳的标准术语(拇指型) |
Standard Terminology for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb-Type) |
| ASTM D 1686-1996 |
熔融状态中固体芳烃与相关材料的颜色的标准试验方法(铂钴标度) |
Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale) |
| ASTM C 1304-1995 |
隔热材料散发气味评定的标准试验方法 |
Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials |
| ASTM D 143-1994 |
洁净木材小样品试验的标准方法 |
Standard Test Methods for Small Clear Specimens of Timber |
| ASTM F 1672-1995 |
膝假肢表面处理的标准规范 |
Standard Specification for Resurfacing Patellar Prosthesis |
| ASTM E 1720-1995 |
在密封容器二氧化碳的生产试验中测定有机化合物已有的、最基本的生物分解性的标准试验方法 |
Standard Test Method for Determining Ready, Ultimate, Biodegradability of Organic Chemicals in a Sealed Vessel CO2 Production Test |
| ASTM F 1493-1993 |
医疗传输系统的财政和财务会计责任标准导则 |
Standard Guide for Financing and Financial Accountability of Medical Transportation Systems |
| ASTM F 1651-1995 |
培训紧急救医师(护理人员)的标准指南 |
Standard Guide for Training the Emergency Medical Technician (Paramedic) |
| ASTM F 1557-1994 |
全身脊柱固定器件特性用标准导则 |
Standard Guide for Full Body Spinal Immobilization Devices (FBSID) Characteristics |
| ASTM F 1558-1994 |
辅助颈椎固定装置(ACSID)的特性标准导则 |
Standard Guide for Characteristics for Adjunct Cervical Spine Immobilization Devices (ACSID) |
| ASTM C 1301-1995 |
用感应耦合等离子体原子发射光谱法(ICP)和原子吸收法(AA)测定石灰岩和石灰中常量元素和痕量元素的标准试验 |
Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA) |
| ASTM E 1754-1995 |
用红外线分光光度法测定液体氯中低水平标准测试方法 |
Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry |
| ASTM E 1752-1995 |
与乙二醇脱水剂有关的多媒体现场辐射和释放数据的采集标准指南 |
Standard Guide for Collection of Multi-Media Field Emission and Discharge Data Associated with Glycol Dehydration Units |
| ASTM E 466-1996 |
金属材料上进行的恒定振幅轴向疲劳试验 |
Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials |
| ASTM E 427-1995 |
用卤素检漏仪(碱离子二极管)试验泄漏的标准实施规程 |
Standard Practice for Testing for Leaks Using the Halogen Leak Detector(Alkali-Ion Diode) |
| ASTM E 393-1996 |
通过分析由裂变剂量计产生的钡140来测定反应速率的试验方法 |
Standard Test Method for Measuring Reaction Rates by Analysis of Barium-140 From Fission Dosimeters |
| ASTM F 1559-1994 |
辅助颈椎固定轴环(CSIC)的特性标准导则 |
Standard Guide for Characteristics for Cervical Spine Immobilization Collar(s) (CSIC) |
| ASTM D 4561-1996 |
沥青铺路材料生产和应用机构质量控制体系的标准实施规程 |
Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials |
| ASTM D 4551-1996 |
聚氯乙烯塑料软隐蔽式防水膜标准规范 |
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane |
| ASTM A 239-1995 |
用普力斯试验法(硫酸铜浸蚀)确定铁或钢制品上镀锌层最薄点的标准测试方法 |
Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles |
| ASTM F 1512-1994 |
溅射目标垫板部件的超声波C扫描粘结评定标准规程 |
Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies |
| ASTM A 423/A 423M-1995 |
无缝和电焊低合金钢管的标准规范 |
Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes |
| ASTM D 4213-1996 |
磨蚀失重法测定涂料耐磨擦磨损的标准试验方法 |
Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss |
| ASTM D 5830-1995 |
用气体色谱法进行危验废料溶剂分析的标准试验方法 |
Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography |
| ASTM D 5829-1996 |
环境分析实验室制订培训计划的标准导则 |
Standard Guide for Preparing a Training Program for Environmental Analytical Laboratories |
| ASTM D 5827-1995 |
用离子色谱法分析氯化物和其它阴离子的发动机冷却剂的标准试验方法 |
Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography |
| ASTM D 3704-1996 |
在摆动运动中使用法列克司环和块磨擦试验机测定润滑脂防磨性的标准试验方法 |
Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion |
| ASTM D 1777-1996 |
测量纺织材料的厚度的标准试验方法 |
Standard Test Method for Thickness of Textile Materials |
| ASTM F 685-1996 |
测定在使用单一成分调色剂系统的非加热固定复印机中调色剂的使用率、效率及撒粉度 |
Standard Practice for Determining Toner Usage, Efficiency, and Dusting Nonheat Fixing Copiers Using Single-Component Toner Systems |
| ASTM F 7-1995 |
氧化铝粉末 |
Standard Specification for Aluminum Oxide Powder |
| ASTM E 1370-1996 |
工作者和工作场地防护用空气取样策略 |
Standard Guide for Air Sampling Strategies for Worker and Workplace Protection |
| ASTM E 1336-1996 |
用辐射分光法从视频显示单元中获取比色数据试验方法 |
Standard Test Method for Obtaining Colorimetric Data From a Visual Display Unit by Spectroradiometry |
| ASTM C 1308-1995 |
固化废料中扩散释放物加速浸出试验,模型扩散的计算机程序和从圆柱形废料状态中分离淋滤的标准试验方法 |
Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive, Fractional Leaching from Cylindrical Waste Forms |
| ASTM G 127-1995 |
氧气装置用清洗剂的选择标准导则 |
Standard Guide for the Selection of Cleaning Agents for Oxygen Systems |
| ASTM F 1653-1995 |
入院前治疗类选法的执行范围用标准指南 |
Standard Guide for Scope of Performance of Triage in a Prehospital Environment |
| ASTM F 1654-1995 |
入院前治疗类选法负责或执行人的培训和评估标准指南 |
Standard Guide for Training and Evaluation of Individuals Who are Responsible for or Perform Triage in a Prehospital Environment |
| ASTM C 802-1996 |
为确定建筑材料试验方法精确度而实行实验室间试验程序的标准实施规程 |
Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials |
| ASTM D 3811-1996 |
压合带开卷力的试验方法 |
Test Method for Unwind Force of Pressure-Sensitive Tapes |
| ASTM G 124-1995 |
在富氧环境中金属材料燃烧特性的测定标准试验方法 |
Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres |
| ASTM E 1090-1996 |
树脂中过氧化二异丙苯及其分解产物的标准试验方法 |
Standard Test Method for Dicumyl Peroxide and Dicumyl Peroxide Decomposition Products in Resins |
| ASTM F 1676-1996 |
体操基本翻转动作用垫的标准规范 |
Standard Specification for Basic Tumbling Mats |
| ASTM F 1655-1995 |
培训野外、延误或延长的交通中第一响应者的标准导则 |
Standard Guide for Training First Responders Who Practice in Wilderness, Delayed, or Prolonged Transport Settings |
| ASTM F 1657-1996 |
具有不相容连接器的吊杆的紧急连接标准规程 |
Standard Practice for Emergency Joining of Booms with Incompatible Connectors |
| ASTM E 1783-1996 |
建筑物和停车场建筑的预制结构密封带的技术规范 |
Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
| ASTM E 821-1996 |
带电粒子照射期间机械性能测量的标准规程 |
Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation |
| ASTM E 807-1996 |
金相实验室评定 |
Standard Practice for Metallographic Laboratory Evaluation |
| ASTM E 802-1995 |
厚度4 1/2英寸(114mm)的灰口铸铁件用基准射线照相 |
Standard Reference Radiographs for Gray Iron Castings Up to 4 1/2 in. (114 mm) in Thickness |
| ASTM E 798-1996 |
对基于加速器的中子源进行辐照的标准实施规范 |
Standard Practice for Conducting Irradiations at Accelerator-Based Neutron Sources |
| ASTM E 789-1995 |
1.2公升的密封圆筒形容器中粉尘爆炸产生压力以及压力升高的速率的标准测试方法 |
Standard Test Method for Dust Explosions in a 1.2-Litre Closed Cylindrical Vessel |
| ASTM D 4463-1996 |
淡水分裂催化剂的金属自由蒸汽去活化作用标准指南 |
Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts |
| ASTM E 1810-1996 |
评估曝露在外的鱼在气味和味道上污染结果的标准规程 |
Standard Practice for Evaluating Effects of Contaminants on Odor and Taste of Exposed Fish |
| ASTM C 786-1996 |
使用59号筛(300μm)、100号筛(150μm)和200号筛(75μm)湿法测定水凝水泥及原材料细度的标准试验方法 |
Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods |
| ASTM F 1694-1996 |
组合人行道路面打滑、绊跌、断裂及下沉事故报告格式和路面评价用标准导则 |
Standard Guide for Composing Walkway Surface Evaluation and Incident Report Forms for Slips, Stumbles, Trips and Falls |
| ASTM B 406-1996 |
硬质合金横向断裂强度的标准试验方法 |
Standard Test Method for Transverse Rupture Strength of Cemented Carbides |
| ASTM B 411-1996 |
铜镍硅合金杆材和棒材标准规范 |
Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar |
| ASTM B 328-1996 |
烧结金属结构零件和油浸轴承的密度、油含量和互连孔隙率的标准试验方法 |
Standard Test Method for Density, Oil Content, and Interconnected Porosity of Sintered Metal Structural Parts and Oil-Impregnated Bearings |
| ASTM E 1819-1996 |
核设备退役的环境监测计划标准指南 |
Standard Guide for Environmental Monitoring Plans for Decommissioning of Nuclear Facilities |
| ASTM E 1814-1996 |
涂层的计算机层析摄影(CT)检查的标准实施规范 |
Standard Practice for Computed Tomographic (CT) Examination of Castings |
| ASTM E 1791-1996 |
半球形几何结构的近红外线仪器反射系数传送标准的标准规程 |
Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry |
| ASTM C 630-1996 |
耐水石墨背衬板 |
Water-Resistant Gypsum Backing Board |
| ASTM F 1183-1996 |
铝合金链环栅栏结构 |
Standard Specification for Aluminum Alloy Chain Link Fence Fabric |
| ASTM B 412-1995 |
铜镍硅合金丝标准规范 |
Standard Specification for Copper-Nickel-Silicon Alloy Wire |
| ASTM E 1811-1996 |
老鼠和小家鼠致瘤性研究的标准试验方法 |
Standard Test Method for Oncogenicity Study in Rats and Mice |
| ASTM D 4082-1995 |
Υ射线对轻水核电站用涂层影响的标准试验方法 |
Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Light-Water Nuclear Power Plants |
| ASTM E 1505-1992 |
根据离子移植外标物测定 SIMS 有关敏感因素的标准指南 |
Standard Guide for Determining SIMS Relative Sensitivity Factors from Ion Implanted External Standards |
| ASTM E 1619-1995 |
老鼠口服慢性毒性研究的标准试验方法 |
Standard Test Method for Chronic Oral Toxicity Study in Rats |
| ASTM A 947M-1995 |
构造成的不锈钢薄板的标准规范 |
Standard Specification for Textured Stainless Steel Sheet [Metric] |
| ASTM D 3889-1996 |
在低温时压感胶带同衬板的粘附力的试验方法 |
Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature |
| ASTM D 3876-1996 |
气相色谱法测定纤维素乙醚制品中甲氧基和羟丙基取代物的标准试验方法 |
Standard Test Method for Methoxyl and Hydroxypropyl Substitution in Cellulose Ether Products by Gas Chromatography |
| ASTM B 106-1996 |
恒温金属挠性的标准试验方法 |
Standard Test Methods for Flexivity of Thermostat Metals |
| ASTM F 1607-1995 |
漏油响应泵试验性能数据报告的标准指南 |
Standard Guide for Reporting of Test Performance Data for Oil Spill Response Pumps |
| ASTM D 4965-1996 |
家庭缝纫的时缝和接缝精整的标准术语 |
Standard Terminology of Seams and Seam Finishes in Home Sewing |
| ASTM D 5205-1996 |
聚醚酰亚胺(PEI)材料的标准分类体系 |
Standard Classification System for Polyetherimide (PEI) Materials |
| ASTM D 5124-1996 |
木材及木制品模拟中随机编号产生器使用和检验的标准实施规范 |
Standard Practice for Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation |
| ASTM E 1627-1994 |
食用油和脂肪的感观评定实用规程 |
Standard Practice for Sensory Evaluation of Edible Oils and Fats |
| ASTM E 1624-1994 |
沉淀物中/水的微观世界中现场化学消毒的标准指南 |
Standard Guide for Chemical Fate in Site-Specific Sediment/Water Microcosms |
| ASTM D 5604-1996 |
沉淀二氧化硅的标准试验方法.用单点B.E.T.氮的吸附法沉淀的硅表面积 |
Standard Test Methods for Precipitated Silica-Surface Area by Single Point B.E.T. Nitrogen Adsorption |
| ASTM A 946-1995 |
耐腐蚀和耐热用铬,铬-镍和硅合金钢板,薄板和带的标准规范 |
Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service |
| ASTM D 4281-1995 |
石油和润滑脂(碳氟化物可提取的物质)的重量测定标准试验方法 |
Standard Test Method for Oil and Grease (Fluorocarbon Extractable Substances) by Gravimetric Determination |
| ASTM A 921/A 921M-1993 |
后热锻用微合金,高质量,热锻钢棒的标准规范 |
Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging |
| ASTM D 5856-1995 |
使用刚性壁压缩模式磁导率计测量多孔性材料液压导电率的标准试验方法 |
Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter |
| ASTM D 3833-1996 |
压感胶带的水蒸汽穿透性的试验方法 |
Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes |
| ASTM F 1543-1996 |
护栏表面减震特性标准规范 |
Standard Specification for Shock Attenuation Properties of Fencing Surfaces |
| ASTM F 1486-1996 |
办公产品中图像产品耐磨性和抗污性测定标准规程(GA-CAT法) |
Standard Practice for Determination of Abrasion and Smudge Resistance of Images Produced from Office Products (GA-CAT Method) |
| ASTM F 1702-1996 |
使用轻型便携式仪器测量普通活动桥面系统的冲击衰减特性标准试验方法 |
Standard Test Method for Measuring Shock-Attenuation Characteristics of Natural Playing Surface Systems Using Lightweight Portable Apparatus |
| ASTM D 5479-1994 |
部分浸入的船舶涂层的耐生物污垢试验的标准规程 |
Standard Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed |
| ASTM F 736-1995 |
用落锤冲击法测定整块聚碳酸酯薄板抗冲击性的试验方法 |
Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight |
| ASTM F 1258-1995 |
应急医疗调度 |
Standard Practice for Emergency Medical Dispatch |
| ASTM D 5249-1995 |
硅酸盐水泥混凝土和地沥青接头加热和制冷接缝密封胶衬垫材料的标准规范 |
Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints |
| ASTM D 5572-1995 |
非结构木材制品中指形接合用胶粘剂的标准规范 |
Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products |
| ASTM E 81-1996 |
定量极性图制备的标准试验方法 |
Standard Test Method for Preparing Quantitative Pole Figures |
| ASTM E 260-1996 |
填料塔气相色谱法的标准操作规程 |
Standard Practice for Packed Column Gas Chromatography |
| ASTM E 247-1996 |
铁矿石和锰矿石中二氧化硅含量的测试方法 |
Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry |
| ASTM D 4375-1996 |
D-19委员会中关于水的基本统计的标准实施规程 |
Standard Practice for Basic Statistics in Committee D-19 on Water |
| ASTM D 5855-1995 |
在自流井中用恒定水位降低法测定固定不漏或含水土层泄露比和储水系数(分析程序)的标准试验方法 |
Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well |
| ASTM D 5854-1996 |
石油和石油产品液体样品的混合及处理的标准实施规程 |
Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
| ASTM E 972-1996 |
用阳光对薄板材料的太阳能光度透设比的测试方法 |
Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight |
| ASTM E 203-1996 |
用卡尔.弗歇尔试剂检验水的试验方法 |
Standard Test Method for Water Using Volumetric Karl Fischer Titration |
| ASTM E 1020-1996 |
事故报告 |
Standard Practice for Reporting Incidents that May Involve Criminal or Civil Litigation |
| ASTM D 5858-1996 |
使用多层弹性理论计算筑路材料原位相等弹性模量的标准导则 |
Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory |
| ASTM F 1236-1996 |
电气保护橡胶制品外观检查的标准导则 |
Standard Guide for Visual Inspection of Electrical Protective Rubber Products |
| ASTM D 5448/D 5448M-1993 |
环形缠绕聚合母体复合圆柱体的表面剪切特性的标准试验方法 |
Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders |
| ASTM D 5419-1995 |
螺纹塑料密封箱抗环境应力裂开性能的标准试验方法 |
Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures |
| ASTM D 5410-1993 |
描述地下水位的数据单元定位的标准指南.第3部分:使用描述符 |
Standard Guide for Set of Data Elements to Describe a Ground-Water Site; Part Three-Usage Descriptors |
| ASTM D 3505-1996 |
纯液态化学品密度或相对密度的标准试验方法 |
Standard Test Method for Density or Relative Density of Pure Liquid Chemicals |
| ASTM D 3625-1996 |
用开水测试水对沥青涂层集料的影响的标准操作规程 |
Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water |
| ASTM D 2855-1996 |
聚氯乙烯管和配件的溶剂粘固接头制作的标准实施规程 |
Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings |
| ASTM D 2854-1996 |
活性碳的表面密度的标准试验方法 |
Standard Test Method for Apparent Density of Activated Carbon |
| ASTM E 205-1996 |
氧燃烧瓶 |
Standard Specification for Oxygen Combustion Flask |
| ASTM D 2913-1996 |
大气中硫醇含量的标准试验方法 |
Standard Test Method for Mercaptan Content of the Atmosphere |
| ASTM D 2789-1995 |
质谱法测定低烯烃汽油中烃类的标准试验方法 |
Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry |
| ASTM E 942-1996 |
辐照金属中氦效应模拟用标准指南 |
Standard Guide for Simulation of Helium Effects in Irradiated Metals |
| ASTM F 1524-1995 |
使用先进的氧化工艺减少化学溢流的标准导则 |
Standard Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills |
| ASTM F 1525-1996 |
减少危险化学物质泄漏中薄膜技术的使用标准导则 |
Standard Guide for Use of Membrane Technology in Mitigating Hazardous Chemical Spills |
| ASTM G 135-1995 |
金属腐蚀数据的计算机化交换用标准导则 |
Standard Guide for Computerized Exchange of Corrosion Data for Metals |
| ASTM D 3156-1996 |
橡胶的标准实施规程.防降解剂(防氧化剂、防臭氧剂及稳定剂)的色谱分析 |
Standard Practice for Rubber - Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers) |
| ASTM D 5932-1996 |
在工作室空气中9-N-甲氨基甲基葸 (MAMA)对 2,4-甲苯聚氨酯(2,4-TDI)和2,6 -甲苯聚氨酯(2,6-TDI)测定的标准 |
Standard Test Method for Determination of 2,4-Toluene Diiso cyanate (2,4-TDI) and 2,6-Toluene Diiso cyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace |
| ASTM D 4279-1995 |
用固定法和周期法测试航运集装箱水蒸气透过性的标准试验方法 |
Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods |
| ASTM G 8-1996 |
管道涂层阴极剥离的标准试验方法 |
Standard Test Methods for Cathodic Disbonding of Pipeline Coatings |
| ASTM D 5820-1995 |
双缝土工薄膜加压气道评定的标准实施规程 |
Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes |
| ASTM D 5812-1996 |
用毛细管柱气体色谱法测定水中有机氯杀虫剂含量的标准试验方法 |
Standard Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography |
| ASTM E 1770-1995 |
电热原子吸收光谱仪器优化的标准实用规程 |
Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment |
| ASTM E 1788-1996 |
丙烯腈中酸度的标准测试方法 |
Standard Test Method for Acidity in Acrylonitrile |
| ASTM D 4052-1996 |
数字密度计测定液体密度和相对密度的标准试验方法 |
Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter |
| ASTM E 1066-1995 |
氨比色泄漏检验的测试方法 |
Standard Test Method for Ammonia Colorimetric Leak Testing |
| ASTM D 5851-1995 |
设计和执行水监控方案的标准导则 |
Standard Guide for Planning and Implementing a Water Monitoring Program |
| ASTM D 5850-1995 |
测定不完整渗透井网络过滤系数、储藏系数和各向异性比率的标准试验方法(分析程序) |
Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells |
| ASTM B 873-1996 |
B212,B329和B417的测试方法中用的表观密度杯的容积测量的标准试验方法 |
Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417 |
| ASTM B 874-1996 |
用于固体渗金属处理的铬扩散镀层的标准规范 |
Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process |
| ASTM E 498-1995 |
在示踪探针法中用质谱仪检漏器或残余气体分析器作泄漏检验的测试方法 |
Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode |
| ASTM B 773-1996 |
用超声波C扫描测定钎焊或焊接电触点组件的粘接性的标准指南 |
Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies |
| ASTM B 812-1996 |
住宅设备用铝制电压连接件的阻止环境退化的标准试验方法 |
Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications |
| ASTM E 596-1996 |
隔音室减少噪音的实验室测量的标准试验方法 |
Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures |
| ASTM B 715-1996 |
导电用烧结铜结构零件标准规范 |
Standard Specification for Sintered Copper Structural Parts for Electrical Conductivity Applications |
| ASTM B 717-1996 |
钌精炼标准规范 |
Standard Specification for Refined Ruthenium |
| ASTM E 729-1996 |
用鱼、大型无脊椎动物和两栖动物进行剧毒毒性试验的标准指南 |
Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians |
| ASTM B 731-1996 |
60%钯40%银电触点材料标准规范 |
Standard Specification for 60 % Palladium-40 % Silver Electrical Contact Material |
| ASTM E 521-1996 |
用带电粒子照射法模拟中子辐射损害的规程 |
Standard Practice for Neutron Radiation Damage Simulation by Charged-Particle Irradiation |
| ASTM E 725-1996 |
粒状载体与粒状农药抽样的测试方法 |
Standard Test Method for Sampling Granular Carriers and Granular Pesticides |
| ASTM E 705-1996 |
用镎237的放射激活性测定反应速率的测试方法 |
Standard Test Method for Measuring Reaction Rates by Radioactivation of Neptunium-237 |
| ASTM B 866-1995 |
用聚硫化物浸入法测试金属涂层中总疵点和机械损坏的标准试验方法 |
Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion |
| ASTM C 210-1995 |
绝热耐火砖二次加热变化的标准试验方法 |
Standard Test Method for Reheat Change of Insulating Firebrick |
| ASTM E 326-1996 |
用酞酸酐的脂化作用测定羟基团的试验方法 |
Standard Test Method for Hydroxyl Groups by Phthalic Anhydride Esterification |
| ASTM E 1673-1996 |
百分比悬浮度标准试验方法 |
Standard Test Method for Percent Suspensibility |
| ASTM E 1691-1995 |
分析性化学实验室的鉴定和评定用标准指南 |
Standard Guide for Evaluation and Assessment of Analytical Chemistry Laboratories |
| ASTM E 726-1996 |
粒状载体与粒状农药颗粒大小分布的试验方法 |
Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides |
| ASTM E 704-1996 |
用铀238的放射激活性测定反应速率的测试方法 |
Standard Test Method for Measuring Reaction Rates by Radioactivation of Uranium-238 |
| ASTM E 1702-1995 |
辐射处理用ｒ射线设备放射量测定用标准实用规程 |
Standard Practice for Dosimetry in a Gamma Irradiation Facility for Radiation Processing |
| ASTM D 5660-1996 |
使用发光海生细菌毒性试验法评定化学污染的水和土壤微生物去毒的标准试验方法 |
Standard Test Method for Assessing the Microbial Detoxification of Chemically Contaminated Water and Soil Using a Toxicity Test with a Luminescent Marine Bacterium |
| ASTM D 4497-1994 |
热熔胶粘剂断开时间测定的标准试验方法(手工法) |
Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method) |
| ASTM D 5744-1996 |
用改良湿度室测试固体材料加速风化的标准试验方法 |
Standard Test Method for Accelerated Weathering of Solid Materials Using a Modified Humidity Cell |
| ASTM C 515-1995 |
耐化学腐蚀的陶质填充材料标准规范 |
Standard Specification for Chemical-Resistant Ceramic Tower Packings |
| ASTM F 1693-1996 |
作为陆地外溢石油回收的生物环境治理条件用标准导则 |
Standard Guide for Consideration of Bioremediation as an Oil Spill Response Method on Land |
| ASTM E 322-1996 |
低合金钢和铸铁的X射线发射光谱测定分析法 |
Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels and Cast Irons |
| ASTM E 321-1996 |
钕-148法测定铀和钚燃料中原子裂变百分比的标准试验方法 |
Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method) |
| ASTM B 867-1995 |
工程用钯-镍电镀层的标准规范 |
Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use |
| ASTM E 201-1996 |
工业化学液体体积和重量计算的标准试验方法 |
Standard Test Method for Calculation of Volume and Weight of Industrial Chemical Liquids |
| ASTM E 488-1996 |
混凝土及砌块构件中锚定强度的试验方法 |
Standard Test Methods for Strength of Anchors in Concrete and Masonry Elements |
| ASTM F 1728-1996 |
多人冷水中生存/解救技术用标准规程:拥挤点 |
Standard Practice for Multiple Persons Cold Water Survival/Rescue Technique: Huddle Position |
| ASTM D 5683-1995 |
屋顶材料,防水材料和薄膜挠性的标准试验方法 |
Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes |
| ASTM B 868-1996 |
电气连接系统的接触性能分类的标准实施规程 |
Standard Practice for Contact Performance Classification of Electrical Connection Systems |
| ASTM B 237-1996 |
精炼锑标准规范 |
Standard Specification for Refined Antimony |
| ASTM E 1333-1996 |
确定的试验条件下用大容器测定木制品甲醛量的测试方法 |
Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber |
| ASTM F 1707-1996 |
测定传真机能量消耗的标准规程 |
Standard Practice for Determining Energy Consumption of Facsimile Machines |
| ASTM E 1301-1995 |
通过实验室间比对测试熟练程度的标准指南 |
Standard Guide for Proficiency Testing by Interlaboratory Comparisons |
| ASTM F 1716-1996 |
船用软件系统的性能和转换维护用标准导则 |
Standard Guide for Transition and Performance of Marine Software Systems Maintenance |
| ASTM F 1706-1996 |
测定非击打式印刷机能量消耗的标准规程 |
Standard Practice for Determining Energy Consumption of Nonimpact Personal Computer Printers |
| ASTM F 1711-1996 |
使用四点探测法测定专业平板显示器用薄膜导线的薄膜电阻的标准规程 |
Standard Practice for Measuring Sheet Resistance of Thin Film Conductors for Flat Panel Display Manufacturing Using a Four-Point Probe |
| ASTM F 1699-1996 |
无源光纤密封件的标准分类 |
Standard Classification for Passive Fiber Optic Seals |
| ASTM F 1729-1996 |
个人冷水中生存/解救技术用标准规程:救助位置 |
Standard Practice for Single Person Cold Water Survival/Rescue Technique: Help Position |
| ASTM F 821-1995 |
船舶内部钢门及门框 |
Standard Specification for Doors and Frames, Steel, Interior, Marine |
| ASTM D 5741-1996 |
用风标和旋转风速计表示表面风特性的标准实施规程 |
Standa |
