| 标准号 |
中文名 |
英文名 |
| ASTM F 1040-1987 |
粘性冲击型和干燥型可互换空气调节过滤器设备的标准规范 |
Standard Specification for Filter Units, Air Conditioning: Viscous-Impingement and Dry Types, Replaceable |
| ASTM B 183-1979 |
电镀用低碳钢的制备 |
Preparation of Low-Carbon Steel for Electroplating |
| ASTM C 899-1979 |
报告耐火材料性能测量用米制单位应用标准规程 |
Standard Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials (COMMITTEE C-8 SUPPLEMENT TO E 380) |
| ASTM B 604-1991 |
塑料表面装饰用铜加镍铬镀层标准规范 |
Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics |
| ASTM D 3922-1989 |
用于测定水中可溶性污物移动的粒状活性碳控制性能的评价 |
Estimating the Operating Performance of Granular Activated Carbon for Removal of Soluble Pollutants from Water |
| ASTM C 182-1988 |
绝热耐火砖的热传导性的测试方法 |
Test Method for Thermal Conductivity of Insulating Firebrick |
| ASTM D 3281-1984 |
用冲击边缘弯曲仪测定附加有机涂层可成形性的试验方法 |
Test Method for Formability of Attached Organic Coatings with Impact-Wedge Bend Apparatus |
| ASTM B 636-1984 |
用螺旋收缩仪测量电镀金属镀层内应力的方法 |
Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer |
| ASTM B 629-1977 |
电镀用钼和钼合金的制备 |
Preparation of Molybdenum and Molybdenum Alloys for Electroplating |
| ASTM B 627-1984 |
电解腐蚀试验方法(EC试验) |
Test Method for Electrolytic Corrosion Testing (EC Test) |
| ASTM B 615-1979 |
测定滑动电触点电接触噪音 |
Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts |
| ASTM F 661-1992 |
过滤器评定批料样品时用光电粒子计数器对粒子数及大小分布的测量方法 |
Particle Count and Size Distribution Measurement in Batch Samples for Filter Evaluation Using an Optical Particle Counter |
| ASTM F 478-1992 |
绝缘线路软管及覆盖物的使用保养 |
In-Service Care of Insulating Line Hose and Covers |
| ASTM A 288-1991 |
涡轮发电机磁性定位环用碳素钢和合金钢锻件 |
Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators |
| ASTM E 745-1980 |
太阳能加热和制冷系统中用传热液体的金属容器材料的腐蚀模拟维护试验 |
Simulated Service Testing for Corrosion of Metallic Containment Materials for Use with Heat-Transfer Fluids in Solar Heating and Cooling Systems |
| ASTM D 1575-1990 |
洗净羊毛及生条中羊毛纤维长度的测试方法 |
Test Method for Fiber Length of Wool in Scoured Wool and in Card Sliver |
| ASTM F 1073-1987 |
船用水密/气密/不透气、防风雨和无夹扣门门配件的标准规范 |
Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use |
| ASTM F 1129-1988 |
用含水泡沫控制从不溶混合挥发性液体中产生的蒸气危害 |
Using Aqueous Foams to Control the Vapor Hazard from Immiscible Volatile Liquids |
| ASTM F 1128-1988 |
用盐冲洗法作透明塑料和表层的抗腐蚀性的试验方法 |
Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using Salt Impingement Method |
| ASTM F 1127-1988 |
危险品泄漏紧急治理人员设置封锁线 |
Containment by Emergency Response Personnel of Hazardous Material Spills |
| ASTM F 1125-1987 |
冲击式打印系统中成象质量的标准术语 |
Standard Terminology of Image Quality in Impact Printing Systems |
| ASTM F 1123-1987 |
非金属的膨胀节 |
Standard Specification for Non-Metallic Expansion Joints |
| ASTM A 439-1983 |
奥氏体可锻铸铁铸件 |
Standard Specification for Austenitic Ductile Iron Castings |
| ASTM A 400-1969 |
钢棒的成分及机械性能选择指南的标准操作规程 |
Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties |
| ASTM C 461-1981 |
与隔热材料一起使用的胶合辅料和涂料的试验方法 |
Test Methods for Mastics and Coatings Used with Thermal Insulation |
| ASTM E 732-1980 |
一次性巴斯德型吸管的标准规范 |
Standard Specification for Disposable Pasteur-Type Pipet |
| ASTM E 823-1981 |
太阳能收集器非操作暴露和检验 |
Nonoperational Exposure and Inspection of a Solar Collector |
| ASTM E 889-1982 |
固体废料物流成分和纯度的试验方法 |
Test Method for Composition or Purity of a Solid Waste Materials Stream |
| ASTM E 905-1987 |
追踪强化太阳能收集器热性能的试验方法 |
Test Method for Determining Thermal Performance of Tracking Concentrating Solar Collectors |
| ASTM D 4892-1989 |
固体硬沥青密度的标准试验方法(氦比重瓶比重测定法) |
Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method) |
| ASTM D 4938-1989 |
用高速水对防污漆腐蚀检验的试验方法 |
Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water |
| ASTM D 4356-1984 |
建立一致的试验方法公差的规程 |
Standard Practice for Establishing Consistent Test Method Tolerances |
| ASTM F 1121-1987 |
船舶灭火用国际海岸通讯线 |
Standard Specification for International Shore Connections for Marine Fire Applications |
| ASTM A 355-1989 |
掺氮用合金钢棒 |
Standard Specification for Steel Bars, Alloys, for Nitriding |
| ASTM E 887-1988 |
回收废燃料(RDF)及其灰烬中二氧化硅的测试方法 |
Test Method for Silica in Refuse-Derived Fuel (RDF) and RDF Ash |
| ASTM D 4654-1987 |
皮革中亚硫酸盐盐基度的标准试验方法 |
Standard Test Method for Sulfate Basicity in Leather |
| ASTM D 4653-1987 |
皮革中总氯化物的试验方法 |
Test Method for Total Chlorides in Leather |
| ASTM C 660-1981 |
陶瓷灰铁铸件的生产和制造 |
Production and Preparation of Gray Iron Castings for Porcelain Enameling |
| ASTM D 425-1988 |
土壤离心湿度当量试验方法 |
Test Method for Centrifuge Moisture Equivalent of Soils |
| ASTM D 607-1982 |
湿磨云母颜料的标准规范 |
Standard Specification for Wet Ground Mica Pigments |
| ASTM D 602-1981 |
硫酸钡颜料的标准规范 |
Standard Specification for Barium Sulfate Pigments |
| ASTM E 777-1987 |
回收废燃料中分析样品中碳和氢的测试方法 |
Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel |
| ASTM D 267-1982 |
黄青铜粉规格的标准规范 |
Standard Specification for Gold Bronze Powder |
| ASTM E 830-1987 |
回收废燃料分析样品中灰份的测试方法 |
Standard Test Method for Ash in the Analysis Sample of Refuse-Derived Fuel |
| ASTM D 1324-1983 |
改性木材 |
Modified Wood |
| ASTM G 56-1982 |
墨水浸渍的织物打印带的磨损性标准试验方法 |
Standard Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons |
| ASTM G 50-1976 |
大气对金属腐蚀试验的实施 |
Conducting Atmospheric Corrosion Tests on Metals |
| ASTM G 49-1985 |
直接拉伸应力腐蚀试样的制备和使用 |
Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens |
| ASTM D 3662M-1988 |
压合胶带抗破裂强度的试验方法(米制) |
Test Method for Bursting Strength of Pressure-Sensitive Tapes (Metric) |
| ASTM D 3662-1988 |
压合胶带抗破裂强度的试验方法 |
Test Method for Bursting Strength of Pressure-Sensitive Tapes |
| ASTM D 3659-1980 |
半约束法测定衣料的可燃性的试验方法 |
Test Method for Flammability of Apparel Fabrics by Semi-Restraint Method |
| ASTM B 362-1991 |
恒温双金属制螺旋线圈的机械扭转率的试验方法 |
Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal |
| ASTM F 1375-1992 |
气体分配系统元部件用金属表面状态的能量分散X射线分光光谱分析试验法 |
Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components |
| ASTM D 2024-1965 |
非离子表面活性剂始凝点的标准试验方法 |
Standard Test Method for Cloud Point of Nonionic Surfactants |
| ASTM D 3153-1987 |
水乳化地板抛光剂可再涂覆性的试验方法 |
Test Method for Recoatability of Water-Emulsion Floor Polishes |
| ASTM D 3200-1974 |
确定圆木电杆推荐应力的设计规范和方法 |
Specification and Methods for Establishing Recommended Design Stresses for Round Timber Construction Poles |
| ASTM D 3199-1984 |
水蒸气通过螺帽闭合衬套传输的标准试验方法 |
Standard Test Method for Water Vapor Transmission Through Screw-Cap Closure Liners |
| ASTM D 3152-1972 |
用压力膜装置对细土壤的毛细管与水分之间关系的试验方法 |
Test Method for Capillary-Moisture Relationships for Fine-Textured Soils by Pressure-Membrane Apparatus |
| ASTM B 556-1990 |
用点滴试验法测量薄镀铬层厚度 |
Standard Guide for Measurement of Thin Chromium Coatings by Spot Test |
| ASTM E 1048-1988 |
抗凝剂涂覆的彩色编码吸管或容器的标准规范 |
Standard Specification for Color-Coding Pipets or Containers Coated With Anticoagulants |
| ASTM E 1047-1985 |
一次性温特罗布血沉玻璃试管的标准规范 |
Standard Specification for Blood Sedimentation Tube, Wintrobe, Glass, Disposable |
| ASTM B 580-1979 |
铝阳极氧化镀层 |
Anodic Oxide Coatings on Aluminum |
| ASTM C 536-1983 |
钢制设备玻璃涂层的连续性电测试的标准试验方法 |
Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing |
| ASTM G 20-1988 |
管道涂层抗化学药物腐蚀性的试验方法 |
Test Method for Chemical Resistance of Pipeline Coatings |
| ASTM G 92-1986 |
大气试验现场表征的标准实施规程 |
Standard Practice for Characterization of Atmospheric Test Sites |
| ASTM D 4195-1988 |
反渗透设备用水质分析导则 |
Water Analysis for Reverse Osmosis Application |
| ASTM D 3322-1982 |
预成型金属表面的底漆及二道底漆的试验 |
Testing Primers and Primer Surfacers over Preformed Metal |
| ASTM D 2963-1978 |
粘土稳定的沥青乳状液检验流动表一致性的试验方法 |
Test Method for Testing Flow Table Consistency of Clay-Stabilized Asphalt Emulsions |
| ASTM D 3380-1990 |
塑料基微波电路底板的相对介电常数(介电常数)及损耗因数的试验方法 |
Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates |
| ASTM D 3376-1988 |
制造电绝缘材料用纸浆的取样及试验的标准试验方法 |
Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation |
| ASTM E 856-1983 |
有关废弃物再生燃料的物理和化学性质术语和缩略语定义 |
Definitions of Terms and Abbreviations Relating to Physical and Chemical Characteristics of Refuse Derived Fuel |
| ASTM E 853-1987 |
轻水堆监测结果的分析和说明 |
Analysis and Intrepretation of Light-Water Reactor Surveillance Results, E 706(IA) |
| ASTM D 2035-1980 |
水的凝聚絮凝瓶试验 |
Coagulation-Flocculation Jar Test of Water |
| ASTM D 3168-1985 |
乳化涂料中高聚物的定性识别的标准规程 |
Standard Practice for Qualitative Identification of Polymers in Emulsion Paints |
| ASTM D 3280-1985 |
锌白颜料的分析方法 |
Test Methods for Analysis of White Zinc Pigments |
| ASTM D 3272-1976 |
从溶剂稀释涂料中真空蒸馏出分析用溶剂的方法 |
Vacuum Distillation of Solvents from Solvent-Reducible Paints for Analysis |
| ASTM D 3271-1987 |
直接把溶剂稀释的涂料注射到气相色谱仪中进行溶剂分析 |
Direct Injection of Solvent-Reducible Paints into a Gas Chromatograph for Solvent Analysis |
| ASTM D 3048-1989 |
碱性朊酶的标准试验方法 |
Standard Test Method of Assay for Alkaline Protease |
| ASTM D 3022-1984 |
用微型磨砂机对有色染料着色和着色力的试验方法 |
Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill |
| ASTM D 3140-1990 |
扩口聚烯烃管及管道系统 |
Flaring Polyolefin Pipe and Tubing |
| ASTM E 1448-1992 |
道路粗糙度对车辆影响的测量系统的校正 |
Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness |
| ASTM D 3692-1989 |
标签标明衣物及家用装饰物用拉链的选择规定 |
Selection of Zippers for Care-Labeled Apparel and Household Furnishings |
| ASTM C 638-1992 |
防辐射混凝土集料组分的标准描述命名法 |
Standard Descriptive Nonmenclature of Constituents of Aggregates for Radiation-Shielding Concrete |
| ASTM D 3980-1988 |
涂料及相关材料实验室间的试验 |
Interlaboratory Testing of Paint and Related Materials |
| ASTM E 717-1984 |
声学试验标准的审定附件的编码 |
Preparation of the Accreditation Annex of Acoustical Test Standards |
| ASTM E 660-1990 |
使用小轮环道磨光机给集料或铺砌路面加速磨光 |
Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine |
| ASTM E 659-1978 |
液体化学品自燃温度的试验方法 |
Standard Test Method for Autoignition Temperature of Liquid Chemicals |
| ASTM D 3049-1989 |
用氧离子滴定法合成阴离子配合剂的测试方法 |
Test Method for Synthetic Anionic Ingredient by Cationic Titration |
| ASTM F 1007-1986 |
套装滑动成型或船用管道膨胀节 |
Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application |
| ASTM E 734-1980 |
一次性血液样品毛细玻璃试管(血球容量计)的标准规范 |
Standard Specification for Disposable Glass Blood Sample Capillary Tube (Microhematocrit) |
| ASTM D 4718-1987 |
含有超大颗粒土壤的单位重量和含水量的修正标准实施规程 |
Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles |
| ASTM D 3093-1972 |
残余烟雾杀虫剂杀虫效力的试验方法 |
Test Method for Pickup Efficiency of Residual Aerosol Insecticides |
| ASTM D 3519-1988 |
含水介质中泡沫的标准试验方法(搅拌器试验) |
Standard Test Method for Foam in Aqueous Media (Blender Test) |
| ASTM D 3516-1989 |
灰化纤维素的标准试验方法 |
Standard Test Methods for Ashing Cellulose |
| ASTM D 3543-1993 |
金属滑道粘附性的试验方法 |
Test Method for Metal Glide Adhesion |
| ASTM D 3491-1992 |
硫化橡胶容器和管道内衬的试验方法 |
Test Methods for Vulcanizable Rubber Tank and Pipe Lining |
| ASTM D 564-1987 |
液体涂料催干剂的试验方法 |
Test Methods for Liquid Paint Driers |
| ASTM E 778-1987 |
回收废燃料的分析样品中氮的标准测试方法 |
Standard Test Methods for Nitrogen in the Analysis Sample of Refuse-Derived Fuel |
| ASTM E 1449-1992 |
超临界流体色谱法的术语和相互关系 |
Supercritical Fluid Chromatography Terms and Relationships |
| ASTM C 715-1990 |
用光度计分析法测定搪瓷用钢表面镍的标准试验方法 |
Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis |
| ASTM D 2752-1988 |
石棉纤维透气性的标准试验方法 |
Standard Test Methods for Air Permeability of Asbestos Fibers |
| ASTM C 1003-1983 |
用校验热盒法测量冷气管道管段的热特性的试验方法 |
Test Method for Thermal Performance of Cooling-Air Duct Sections, Using a Calibrated Hot Box |
| ASTM C 997-1983 |
核纯级钠及复盖气体的化学分析和仪器分析方法 |
Test Methods for Chemical and Instrumental Analysis of Nuclear-Grade Sodium and Cover Gas |
| ASTM E 92-1982 |
金属材料维氏硬度的测试方法 |
Standard Test Method for Vickers Hardness of Metallic Materials |
| ASTM E 75-1976 |
铜镍及铜镍锌合金的化学分析试验方法 |
Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zinc Alloys |
| ASTM C 980-1988 |
工业烟囱砌壁砖的标准规范 |
Standard Specification for Industrial Chimney Lining Brick |
| ASTM C 975-1987 |
用压力法从捣实碱性耐火产品中制备试验样品的标准实施规程 |
Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing |
| ASTM C 974-1987 |
用浇铸法从铸制碱性耐火产品中制备试验样品 |
Preparing Test Specimens from Basic Refractory Castable Products by Casting |
| ASTM C 973-1987 |
用压力法从喷制的碱性耐火产品中制备试验样品 |
Preparing Test Specimens from Basic Refractory Gunning Products by Pressing |
| ASTM D 422-1963 |
土壤粒度分析的标准试验方法 |
Standard Test Method for Particle-Size Analysis of Soils |
| ASTM D 421-1985 |
土壤粒度分析试验方法 |
Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants |
| ASTM D 4211-1982 |
鱼样的分类 |
Classification for Fish Sampling |
| ASTM D 4677-1987 |
橡胶配料的分类.二氧化钛 |
Standard Classification for Rubber Compounding Materials - Titanium Dioxide |
| ASTM D 4720-1987 |
软窗帘性能评定的标准实施规程 |
Standard Practice for Evaluation of the Performance of Soft Window Coverings |
| ASTM D 3077-1972 |
气溶胶制品喷雾图样的比较 |
Comparison of Spray Patterns of Aerosol Products |
| ASTM D 3073-1972 |
玻璃气溶胶容器的填充料和检验 |
Filling and Inspection of Glass Aerosol Containers |
| ASTM D 4750-1987 |
测定钻井或监测井(观察井)中地下水位的试验方法 |
Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well) |
| ASTM D 4749-1987 |
进行煤和特定煤粒度筛选分析的标准试验方法 |
Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size |
| ASTM E 785-1981 |
实验室灼烧金属坩锅 |
Crucibles, Ignition, Laboratory, Metal |
| ASTM C 329-1988 |
焙烧卫生陶瓷材料比重的标准试验方法 |
Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials |
| ASTM D 2205-1985 |
路标漆试验的选择 |
Selection of Tests for Traffic Paints |
| ASTM D 4188-1982 |
在线加压凝结-絮凝-过滤试验 |
Performing Pressure In-Line Coagulation-Flocculation-Filtration Test |
| ASTM D 4442-1992 |
木材和木基材料含水量的直接测量用试验方法 |
Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
| ASTM F 16-1967 |
电子器件和电灯用电线及带条的直径或厚度测量方法 |
Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps |
| ASTM D 4174-1989 |
石油液压系统的清理、冲洗及净化的标准实施规程 |
Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems |
| ASTM F 144-1980 |
偏振法测定膨胀特性用的参考玻璃金属夹层密封材料的制作与试验 |
Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods |
| ASTM F 937-1985 |
铸钢船锚塞块 |
Chocks, Ship Mooring, Cast Steel |
| ASTM F 936-1985 |
巴拿马铸钢船锚塞块 |
Chocks, Panama, Mooring Cast Steel |
| ASTM F 137-1971 |
用圆柱形芯轴装置对弹性地板材料韧性的试验方法 |
Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus |
| ASTM F 135-1976 |
玻璃封装电子器件受浇铸化合物所引起的灌封应力的试验方法 |
Test Method for Embedment Stress Caused by Casting Compounds on Glass-Encased Electronic Components |
| ASTM F 134-1985 |
用氦质谱仪检漏器测定电子元件密封性的试验方法 |
Test Methods for Determining Hermeticity of Electron Devices with a Helium Mass Spectrometer Leak Detector |
| ASTM D 2534-1988 |
石蜡覆层动态摩擦系数的标准试验方法 |
Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings |
| ASTM F 105-1972 |
58型硼硅酸盐密封玻璃 |
Type 58 Borosilicate Sealing Glass |
| ASTM F 926-1985 |
用户用便携式煤油容器的警告标签标准规范 |
Standard Specification for Cautionary Labeling of Portable Kerosine Containers for Consumer Use |
| ASTM F 452-1976 |
预制头骨形成板 |
Preformed Cranioplasty Plates |
| ASTM F 446-1985 |
浴池区域内安装的抓杆和辅助装置的消费者安全标准规范 |
Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area |
| ASTM F 445-1988 |
淋浴区域内防急冷急热装置和系统的安全使用规范 |
Consumer Safety Specification for Thermal-Shock-Preventing Devices and Systems in Showering Areas |
| ASTM F 982-1986 |
静动脉连接用外科植入夹的特性表示 |
Disclosure of Characteristics of Surgically Implanted Clamps for Carotid Occlusion |
| ASTM F 979-1986 |
混合微电路组件在封装前的密封性的试验方法 |
Test Method for Hermeticity of Hybrid Microcircuit Packages Prior to Lidding |
| ASTM C 986-1989 |
核燃料周期的培训计划的制定及发展 |
Developing Training Programs in the Nuclear Fuel Cycle |
| ASTM E 1157-1987 |
可重复使用的实验室玻璃器皿的取样和试验 |
Standard Specification for Sampling and Testing of Reusable Laboratory Glassware |
| ASTM D 3924-1980 |
色漆、清漆、喷漆和相关材料状态调节和试验用标准环境的标准规范 |
Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials |
| ASTM D 4826-1988 |
纸浆、纸张和纸板用测量单位和换算系数 |
Standard Practice for Units of Measurement and Conversion Factors for Pulp, Paper, and Paperboard |
| ASTM F 851-1987 |
自动升高座椅装置的试验方法 |
Test Method for Self-Rising Seat Mechanisms |
| ASTM F 18-1964 |
电子设备用玻璃金属底板评定标准规范和试验方法 |
Standard Specification and Test Method for Evaluation of Glass-to-Metal Headers Used in Electron Devices |
| ASTM E 1202-1987 |
微核检测标准制定用标准指南 |
Standard Guide for Development of Micronucleus Assay Standards |
| ASTM C 373-1988 |
焙烧卫生陶瓷制品的吸水率、松密度、表观多孔性与表观比重的标准试验方法 |
Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products |
| ASTM F 66-1984 |
微电子器件制造用光敏抗蚀剂的试验方法 |
Test Methods for Testing Photoresists Used in Microelectronic Fabrications |
| ASTM F 19-1964 |
镀金属陶瓷密封件抗拉及真空试验方法 |
Test Method for Tension and Vacuum Testing Metalized Ceramic Seals |
| ASTM F 147-1987 |
非金属衬垫材料挠性标准试验方法 |
Standard Test Method for Flexibility of Non-Metallic Gasket Materials |
| ASTM F 145-1972 |
平面衬垫连接件的评定 |
Evaluating Flat-Faced Gasketed Joint Assemblies |
| ASTM F 890-1984 |
微电子器件加工过程用的光刻膜中针孔密度的测定 |
Determining Pinhole Density in Photoresist Films Used in Microelectronic Device Processing |
| ASTM F 921-1985 |
有关止血钳的名词术语 |
Standard Terminology Relating to Hemostatic Forceps |
| ASTM F 902-1984 |
用测量孔隙率和渗透率的方法计算过滤器介质平均循环毛细当量孔径 |
Calculating the Average Circular-Capillary-Equivalent Pore Diameter in Filter Media from Measurements of Porosity and Permeability |
| ASTM F 895-1984 |
琼脂扩散细胞培养屏蔽细胞毒素的试验方法 |
Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity |
| ASTM D 4817-1988 |
橡胶化合材料的分类.硬质酸 |
Classification for Rubber Compounding Materials - Stearic Acid |
| ASTM E 1201-1987 |
用圆锥形拖网采集浮游生物 |
Standard Practice for Sampling Zooplankton with Conical Tow Nets |
| ASTM E 1200-1987 |
浮游生物防腐 |
Preserving Zooplankton Samples |
| ASTM E 1199-1987 |
用克--朋氏浮游生物采样器采集浮游生物 |
Sampling Zooplankton with a Clarke-Bumpus Plankton Sampler |
| ASTM E 1198-1987 |
用泵对浮游生物取样的标准实施规程 |
Standard Practice for Sampling Zooplankton with Pumps |
| ASTM E 1197-1987 |
进行陆地土壤芯样缩影测试的标准指南 |
Standard Guide for Conducting a Terrestrial Soil-Core Microcosm Test |
| ASTM F 854-1983 |
复写纸清洁度的标准试验方法 |
Standard Test Method for Cleanliness of Carbon Paper |
| ASTM F 784-1982 |
校准放射性同位素密封试验仪的方法 |
Test Method for Calibrating Radioisotope Hermetic Test Apparatus |
| ASTM F 778-1988 |
过滤介质耐气体流动试验的标准方法 |
Standard Methods for Gas Flow Resistance Testing of Filtration Media |
| ASTM F 766-1982 |
蜡的熔点试验方法 |
Test Method for Melting Point of Waxes |
| ASTM F 889-1984 |
用真空降低技术表征达到一定技术水平的平面综合特性的方法 |
Test Method for Characterizing a Combination of Properties of Planar Surfaces to a Technical Level by a Vacuum Hold-Down Technique |
| ASTM F 808-1983 |
在未控制环境中收集推土机性能数据 |
Collecting Skimmer Performance Data in Uncontrolled Environments |
| ASTM F 802-1983 |
根据鞋靴磨擦力选定某种人行道的表面 |
Selection Election of Certain Walkway Surfaces When Considering Footwear Traction |
| ASTM E 1250-1988 |
硅电子器件辐射强度试验用钴60辐射源的低能γ成分评估的电离箱的应用的标准试验方法 |
Standard Test Method for Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testing of Silicon Electronic Devices |
| ASTM F 97-1972 |
用染料渗透法测定电子器件的密封性 |
Determining Hermeticity of Electron Devices by Dye Penetration |
| ASTM F 85-1976 |
电子管用导体引线的命名 |
Standard Practice for Nomenclature for Wire Leads Used as Conductors in Electron Tubes |
| ASTM F 83-1971 |
电子发射极的热离子常数定义和测定的标准实施规范 |
Standard Practice for Definition and Determination of Thermionic Constants of Electron Emitters |
| ASTM F 865-1984 |
厚膜器件陶瓷基片横向弯曲度的试验方法 |
Test Methods for Gross Camber of Ceramic Substrates for Thick Film Applications |
| ASTM F 864-1984 |
硬表面玻璃照相平片的检测 |
Inspection of Hard-Surface Glass Photoplates |
| ASTM F 863-1984 |
自旋涂覆保护层中缺陷检测 |
Detection of Defects in Spin-Coated Resist |
| ASTM F 873-1984 |
在临时油田现场焚烧漏洒废油的规则 |
Incinerating Oil Spill Wastes at Temporary Field Locations |
| ASTM F 872-1984 |
空调过滤装置:可清洗的粘滞动力附着型 |
Filter Units, Air Conditioning: Viscous-Impingement Type, Cleanable |
| ASTM F 866-1984 |
放射性同位素密封试验用封装器件封壳衰减系数的测量方法 |
Test Method for Measuring the Package Attenuation Coefficient of a Sealed Device for Radioisotope Hermetic Test |
| ASTM F 908-1985 |
光刻胶安全灯的评价 |
Evaluating Safelights for Photoresists |
| ASTM D 2689-1988 |
醇酸树脂试验 |
Testing Alkyd Resins |
| ASTM F 986-1986 |
吸滤器外壳 |
Suction Strainer Boxes |
| ASTM F 984-1986 |
氧和二氧化碳的皮肤气体监测装置 |
Cutaneous Gas Monitoring Devices for Oxygen and Carbon Dioxide |
| ASTM F 983-1986 |
整形植入件耐用标志 |
Permanent Marking of Orthopaedic Implant Components |
| ASTM D 2832-1992 |
涂料和相关覆层中挥发和不挥发物含量测定的标准指南 |
Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings |
| ASTM F 100-1971 |
用光弹性技术测定电子及类似用途的塑料灌封材料的收缩应力的试验方法 |
Test Method for Shrinkage Stresses in Plastic Embedment Materials Using a Photoelastic Technique for Electronic and Similar Applications |
| ASTM D 5306-1992 |
润滑油和液压液线性火焰传播速度的测试方法 |
Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids |
| ASTM F 753-1987 |
胸罩的分类 |
Classification of Brassieres |
| ASTM F 792-1988 |
控制接近区禁止项目探测用的电离辐射设备的设计和使用 |
Design and Use of Ionizing Radiation Equipment for the Detection of Items Prohibited in Controlled Access Areas |
| ASTM F 787-1982 |
金属钉板器件 |
Metallic Nail-Plate Appliances |
| ASTM F 786-1982 |
金属骨板 |
Metallic Bone Plates |
| ASTM F 785-1982 |
同位素试验法测定密封装置的密封性 |
Test Method for Hermeticity of Sealed Devices by a Radioisotope Test |
| ASTM F 841-1984 |
永久性安装在船舱中的隧道顶推装置 |
Standard Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels |
| ASTM F 840-1983 |
船用垂直固定式钢舷梯 |
Standard Specification for Ladders, Fixed, Vertical, Steel, Ship's |
| ASTM F 817-1983 |
薄膜电阻器材料及工艺特性的试验方法 |
Test Method for Characterization of Film Resistor Materials and Processes |
| ASTM F 816-1983 |
大型混合微电路插件的综合微泄漏和总泄漏的试验方法 |
Test Method for Combined Fine and Gross Leaks for Large Hybrid Microcircuit Packages |
| ASTM E 468-1990 |
金属材料等幅疲劳试验结果表述的标准实施规程 |
Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials |
| ASTM D 4955-1989 |
汽车抛光剂现场评定的标准实施规程 |
Standard Practice for Field Evaluation of Automotive Polish |
| ASTM D 4954-1989 |
洗涤剂中测定次氮基三乙酸酯的试验方法 |
Test Method for Determination of Nitrilotriacetates in Detergents |
| ASTM D 4948-1989 |
测定粘性液体上层分离的试验方法 |
Test Method for Determination of the Upper Layer Separated from a Viscous Liquid |
| ASTM F 4-1966 |
电子管用碳化镍条及碳化镀镍和包镍钢条 |
Carbonized Nickel Strip and Carbonized Nickel-Plated and Nickel-Clad Steel Strip for Electron Tubes |
| ASTM E 855-1990 |
涉及静负载的弹簧用金属板材弯曲试验的方法 |
Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading |
| ASTM E 1270-1988 |
等臂天平的测试方法 |
Test Method for Equal Arm Balances |
| ASTM E 1281-1989 |
核设备退役计划的标准指南 |
Standard Guide for Nuclear Facility Decommissioning Plans |
| ASTM E 1311-1989 |
热像仪用最低可检测温差的测试方法 |
Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems |
| ASTM D 2780-1992 |
液体中固定气体可溶性的标准试验方法 |
Standard Test Method for Solubility of Fixed Gases in Liquids |
| ASTM D 2715-1992 |
真空中润滑剂挥发速率的标准试验方法 |
Standard Test Method for Volatilization Rates of Lubricants in Vacuum |
| ASTM A 686-1992 |
碳素工具钢的标准规范 |
Standard Specification for Tool Steel, Carbon |
| ASTM F 1297-1990 |
撤离和救生设备用定位及说明符号 |
Location and Instruction Symbols for Evacuation and Lifesaving Equipment |
| ASTM F 1298-1990 |
船用柔性扩展型球连接 |
Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications |
| ASTM F 1299-1990 |
烹调设备用食物供给设备外罩 |
Food Service Equipment Hoods for Cooking Appliances |
| ASTM F 1301-1990 |
化工防护套服用标签的标准实施规程 |
Standard Practice for Labeling Chemical Protective Clothing |
| ASTM E 1266-1988 |
结构填料和其它结构中用的石灰,飞灰和重金属废料混合物的处理 |
Processing Mixtures of Lime, Fly Ash and Heavy Metal Wastes in Structural Fills and Other Construction Applications |
| ASTM D 5077-1990 |
有关静电放电包装材料的名词术语 |
Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials |
| ASTM E 458-1972 |
烧蚀的热试验方法 |
Test Method for Heat of Ablation |
| ASTM E 448-1982 |
金属材料的回跳硬度试验 |
Standard Practice for Scleroscope Hardness Testing of Metallic Materials |
| ASTM E 1279-1989 |
用摇瓶衰减弱法作生物降解的试验方法 |
Test Method for Biodegradation by a Shake-Flask Die-Away Method |
| ASTM F 1271-1990 |
船上储罐液体过压保护装置用溢流阀 |
Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
| ASTM F 1246-1991 |
家庭护理用电动排风扇.第1部分:负压电动排风扇和排风扇电路 |
Standard Specification for Electrically Powered Home Care Ventilators, Part 1-Positive-Pressure Ventilators and Ventilator Circuits |
| ASTM A 327-1991 |
铸铁冲击试验用标准试验方法 |
Standard Test Methods for Impact Testing of Cast Irons |
| ASTM E 851-1981 |
光谱化学实验室评定 |
Evaluation of Spectrochemical Laboratories |
| ASTM D 1662-1992 |
切削润滑油中活性硫的标准试验方法 |
Standard Test Method for Active Sulfur in Cutting Oils |
| ASTM E 813-1989 |
Jic-破裂韧性的试验方法 |
Test Method for Jic, a Measure of Fracture Toughness |
| ASTM D 1561-1992 |
用加利福尼亚搅拌压实机法制作沥青混合物试样的标准实施规范 |
Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor |
| ASTM D 2023-1989 |
洗涤剂中甲苯磺酸钠分析的测试方法 |
Standard Test Method of Analysis for Sodium Toluene Sulfonate in Detergents |
| ASTM D 2022-1989 |
含氯漂白剂的抽样和化学分析的标准试验方法 |
Standard Test Methods of Sampling and Chemical Analysis of Chlorine-Containing Bleaches |
| ASTM D 4135-1982 |
用深度综合采样器采集可繁殖海洋浮游生物 |
Sampling Phytoplankton with Depth-Integrating Samplers |
| ASTM D 3456-1986 |
室外暴露试验测定漆膜对微生物侵蚀敏感性的方法 |
Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack |
| ASTM D 3670-1991 |
D-22委员会测定精确度和偏差方法的标准指南 |
Standard Guide for Determination of Precision and Bias of Methods of Committee D22 |
| ASTM D 3639-1992 |
用魁北克试验对石棉分类的试验方法 |
Test Method for Classification of Asbestos by Quebec Test |
| ASTM E 1102-1991 |
有关施用农用化学药物的术语定义 |
Definitions of Terms Relating to Agricultural Chemical Application |
| ASTM E 1073-1991 |
用老鼠获得药理学剖面的标准试验方法 |
Standard Test Method for Obtaining a Pharmacological Profile with Mice |
| ASTM E 432-1991 |
渗漏试验方法的选择 |
Selection of a Leak Testing Method |
| ASTM E 642-1991 |
测定航空喷洒设备的喷洒速率和分布模式 |
Standard Practice for Determining Application Rates and Distribution Patterns from Aerial Application Equipment |
| ASTM E 791-1990 |
以确定不同基本组分来计算回收废燃料的分析数据的方法 |
Test Method for Calculating Refuse-Derived Fuel Analysis Data from As-Determined to Different Bases |
| ASTM E 832-1981 |
实验室滤纸 |
Laboratory Filter Papers |
| ASTM E 784-1989 |
实验室通用夹件和夹架、滴定管和夹件标准规范 |
Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| ASTM F 956-1991 |
铸制声音信号铃 |
Standard Specification for Bell, Cast, Sound Signalling |
| ASTM E 754-1980 |
埋入砖石灰缝中的拉杆和锚的拔拉阻力的标准测试方法 |
Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints |
| ASTM D 1982-1985 |
脂肪酸凝固点标准试验方法 |
Standard Test Method for Titer of Fatty Acids |
| ASTM D 1793-1992 |
地板擦亮乳剂水斑的测试方法 |
Test Method for Water Spotting of Emulsion Floor Polishes |
| ASTM D 1310-1986 |
用泰格开口杯装置测定液体闪点和燃点的测试方法 |
Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus |
| ASTM D 718-1986 |
硅酸铝颜料的分析的标准试验方法 |
Standard Test Methods for Analysis of Aluminum Silicate Pigment |
| ASTM D 5128-1990 |
在线测量低导电水pH的标准试验方法 |
Standard Test Method for On-Line pH Measurement of Water of Low Conductivity |
| ASTM F 1374-1992 |
气体分配系统组件内表面IC/GC/FTIR的离子/有机可萃取物的标准试验方法 |
Standard Test Method for Ionic/Organic Extractables of Internal Surfaces-IC/GC/FTIR for Gas Distribution System Components |
| ASTM C 351-1992 |
热绝缘材料的平均比热的试验方法 |
Test Method for Mean Specific Heat of Thermal Insulation |
| ASTM D 4627-1992 |
水溶性金属加工液的铁片腐蚀用标准试验方法 |
Standard Test Method for Iron Chip Corrosion for Water-Dilutable Metalworking Fluids |
| ASTM D 2501-1991 |
石油润滑油粘度-重力常数(VGC)的计算试验方法 |
Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils |
| ASTM D 541-1987 |
单支黄麻纱规格 |
Single Jute Yarn |
| ASTM D 769-1987 |
黑色合成氧化铁 |
Black Synthetic Iron Oxide |
| ASTM D 768-1981 |
黄色氧化铁的水合物 |
Yellow Iron Oxide Hydrated |
| ASTM D 765-1987 |
未加工黄土和焙烧黄土颜料的标准规范 |
Standard Specification for Raw and Burnt Sienna Pigments |
| ASTM E 790-1987 |
回收废燃料分析样品中残留潮气的测试方法 |
Standard Test Method for Residual Moisture in a Refuse-Derived Fuel Analysis Sample |
| ASTM E 787-1981 |
一次性微型血液收集玻璃吸管的标准规范 |
Standard Specification for Disposable Glass Micro Blood Collection Pipets |
| ASTM E 786-1981 |
铂蒸发皿 |
Dishes, Evaporating, Platinum |
| ASTM D 332-1987 |
白色颜料着色力的标准试验方法 |
Standard Test Method for Relative Tinting Strength of White Pigments by Visual Observation |
| ASTM F 660-1983 |
替换型粒子计数器使用过程中粒度比较的标准实施规范 |
Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters |
| ASTM D 4528-1988 |
橡胶配料的标准分类:硫 |
Standard Classification for Rubber Compounding Materials - Sulfur |
| ASTM F 1200-1988 |
制造好的(焊接)管道过滤器(表压大于150磅/英寸及温度为150华氏度) |
Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
| ASTM F 1199-1988 |
铸造(各种温度及各种压力)和焊接管道过滤器(最大表压为150磅/英寸及最大温度150华氏度) |
Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
| ASTM F 1210-1989 |
在淡水和其它内陆环境、湖泊及大型水体中使用浮油分散剂的生态条件 |
Standard Guide for Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies |
| ASTM F 1209-1989 |
在淡水和其它内陆环境、池塘及沼泽中使用浮油分散剂的生态条件 |
Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and Other Inland Environments, Ponds and Sloughs |
| ASTM F 1205-1988 |
麻醉用呼吸管 |
Anesthesia Breathing Tubes |
| ASTM F 1224-1989 |
提供急救医疗服务系统评定用标准指南 |
Standard Guide for Providing System Evaluation for Emergency Medical Services |
| ASTM F 1257-1990 |
救生/急救技术人员(ALS/EMT)培训计划所需急救医疗服务讲师的选择和实习 |
Standard Guide for Selection and Practice of Emergency Medical Services Instructor for Advanced Life Support/Emergency Medical Technician (ALS/EMT) Training Programs |
| ASTM D 1083-1991 |
集装箱、大型船运箱和板条箱的机械搬运的试验方法 |
Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates |
| ASTM F 1228-1989 |
晶片表面可氧化(有机)碳的测试方法(过硫酸盐法) |
Test Method for Oxidizable (Organic) Carbon on Wafer Surfaces (by Persulfate) |
| ASTM F 1247-1989 |
一般拱形结构的抗侵入性的标准规范 |
Standard Specification for Intrusion Resistant Generic Vault Structures |
| ASTM F 1245-1989 |
船舶用压缩和自闭型,单式与双式水龙头 |
Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| ASTM F 1368-1992 |
用微球体的含水悬浮液体和分光光度计测定液体过滤器筛分性能的测试方法 |
Test Method for Determining the Sieving Performance of a Fluid Filter Medium Employing an Aqueous Suspension of Microspheres and a Spectrophometer |
| ASTM F 1201-1988 |
温度大于零华氏度的管道用流体调节器配件 |
Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
| ASTM E 1470-1992 |
电泳迁移率法表征蛋白质特性的标准试验方法 |
Standard Test Method for Characterization of Proteins by Electrophoretic Mobility |
| ASTM E 1460-1992 |
保健知识基本系数的确定和分配(医学逻辑系统用Arden语法) |
Defining and Sharing Modular Health Knowledge Bases (Arden Syntax for Medical Logic Systems) |
| ASTM D 3757-1989 |
溶剂型地板抛光剂的制备规格 |
Standard Guide for Preparing Specifications for Solvent-based Floor Polishes |
| ASTM D 612-1988 |
石蜡中可碳化物质的标准试验方法 |
Standard Test Method for Carbonizable Substances in Paraffin Wax |
| ASTM D 605-1982 |
硅酸镁颜料(滑石) |
Magnesium Silicate Pigment (Talc) |
| ASTM D 3738-1984 |
医院用上胶床单 |
Standard Specification for Rubber-Coated Cloth Hospital Sheeting |
| ASTM C 824-1991 |
用膨胀计法测定透明玻璃釉瓷及玻璃色料的线性热膨胀的试验方法 |
Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method |
| ASTM D 4259-1988 |
混凝土的磨蚀 |
Abrading Concrete |
| ASTM D 4255-1983 |
复合叠层板材的平面内剪切特性的试验 |
Testing Inplane Shear Properties of Composite Laminates |
| ASTM D 3863-1987 |
评定微生物水质的常规过滤程序用0.4微米到0.45微米薄膜过滤器滞留特性的标准试验方法 |
Standard Test Method for Retention Characteristics of 0.40 to 0.45-&*181m Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality |
| ASTM D 3862-1980 |
评定微生物水质的常规过滤程序用0.2微米薄膜过滤器滞留特性的标准试验方法 |
Standard Test Method for Retention Characteristics of 0.2-&*181m Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality |
| ASTM D 3952-1987 |
太阳能系统用橡胶软管 |
Rubber Hose Used in Solar Energy Systems |
| ASTM D 3944-1988 |
石蜡固化点的标准试验方法 |
Standard Test Method for Solidification Point of Petroleum Wax |
| ASTM A 347-1985 |
用25 厘米艾普斯亭(EPSTEIN) 机架的迪特利(Dieterly)电桥测定材料的交流电磁性能的试验方法 |
Test Method for Alternating-Current Magnetic Properties of Materials Using the Dieterly Bridge Method with 25-cm Epstein Frame |
| ASTM A 346-1974 |
用迪特利(Dieterly)电桥法测定迭片铁芯样品的交流电磁性能的试验方法 |
Test Method for Alternating-Current Magnetic Performance of Laminated Core Specimens Using the Dieterly Bridge Method |
| ASTM D 960-1979 |
生蓖麻油 |
Raw Castor Oil |
| ASTM A 597-1987 |
铸造工具钢 |
Standard Specification for Cast Tool Steel |
| ASTM D 3176-1989 |
煤和焦炭的元素分析 |
Ultimate Analysis of Coal and Coke |
| ASTM D 1245-1984 |
用化学显微镜作水沉积物的检验 |
Examination of Water-Formed Deposits by Chemical Microscopy |
| ASTM B 771-1987 |
硬质合金短杆断裂韧度的试验方法 |
Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides |
| ASTM D 1071-1983 |
气体燃料试样容积的测量方法 |
Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples |
| ASTM B 671-1981 |
精炼铱 |
Refined Iridium |
| ASTM E 491-1973 |
航天飞机热平衡试验用太阳模拟规程 |
Standard Practice for Solar Simulation for Thermal Balance Testing of Spacecraft |
| ASTM B 697-1988 |
电沉积金属镀层和无机镀层检验用抽样方法的选择 |
Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings |
| ASTM D 5389-1993 |
用传声速度计系统测试明渠流量的试验方法 |
Test Method for Open Channel Flow Measurement by Acoustic Velocity Meter Systems |
| ASTM D 2585-1968 |
丝线缠绕的压力容器的准备及抗拉试验方法 |
Test Method for Preparation and Tension Testing of Filament-Wound Pressure Vessels |
| ASTM E 1458-1992 |
用光掩模原版校准检验激光绕射粒子定尺寸仪器的试验方法 |
Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles |
| ASTM F 1386-1992 |
油罐测深用测深管和操作板的结构 |
Construction of a Sounding Tube and Striker Plate for Tank Sounding |
| ASTM D 3342-1990 |
新(未经使用的)辊压油在水中分散稳定性的标准试验方法 |
Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water |
| ASTM D 4359-1990 |
测定一种物质是液体或固体的试验方法 |
Test Method for Determining Whether a Material Is a Liquid or a Solid |
| ASTM D 5013-1989 |
管道和其他地点排放的废弃物的取样 |
Sampling Wastes from Pipes and Other Point Discharges |
| ASTM D 4980-1989 |
在废弃物中筛选PH值的试验方法 |
Test Methods for Screening of pH in Waste |
| ASTM C 866-1977 |
卫生陶瓷粘土的过滤速率的测试方法 |
Test Method for Filtration Rate of Ceramic Whiteware Clays |
| ASTM E 121-1983 |
铜碲合金的化学分析标准试验方法 |
Standard Test Methods for Chemical Analysis of Copper-Tellurium Alloys |
| ASTM E 296-1970 |
用于空间模拟器的电离压力计的标准实施规程 |
Standard Practice for Ionization Gage Application to Space Simulators |
| ASTM D 4939-1989 |
在天然海水中使船只防污涂层遭受生物污垢和流体剪切力的试验方法 |
Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater |
| ASTM E 895-1989 |
水溶液中有机化合物的水解率常数测定 |
Determination of Hydrolysis Rate Constants of Organic Chemicals in Aqueous Solutions |
| ASTM E 210-1963 |
显微物镜螺纹 |
Standard Specification for Microscope Objective Thread |
| ASTM E 898-1988 |
直读实验室秤盘和天平的最大载荷试验 |
Standard Test Method of Testing Top-Loading, Direct-Reading Laboratory Scales and Balances |
| ASTM E 157-1988 |
在金属系统中确定结晶阶段名称的方法 |
Assigning Crystallographic Phase Designations in Metallic Systems |
| ASTM F 1347-1991 |
手工操作的加燃料软管卷盘标准规范 |
Standard Specification for Manually Operated Fueling Hose Reels |
| ASTM F 1325-1991 |
不锈钢缝合用针托.一般技术要求和通信试验方法 |
Stainless Steel Suture Needle Holders-General Workmanship Requirements and Corresponding Test Methods |
| ASTM E 525-1990 |
石墨反应堆剂量测定结果的报告 |
Reporting Dosimetry Results on Nuclear Graphite |
| ASTM C 1144-1989 |
易碎核废料模壳张裂强度试验方法 |
Test Method for Splitting Tensile Strength for Brittle Nuclear Waste Forms |
| ASTM D 451-1991 |
沥青屋顶制品用粒状矿物铺面材料筛分分析试验方法 |
Test Method for Sieve Analysis of Granular Mineral Surfacing for Asphalt Roofing Products |
| ASTM F 1268-1990 |
急救医疗服务系统的公共信息、教育和相关项目的建立和运行用标准指南 |
Standard Guide for Establishing and Operating a Public Information, Education, and Relations Program for Emergency Medical Service Systems |
| ASTM F 1266-1989 |
脑部立体手术器械的性能规范 |
Performance Specification for Cerebral Stereotactic Instruments |
| ASTM F 1244-1989 |
船舶起居室 |
Berths, Marine |
| ASTM D 2651-1990 |
胶粘剂粘结用金属表面处理 |
Preparation of Metal Surfaces for Adhesive Bonding |
| ASTM D 2628-1991 |
混凝土路面用预制聚氯丁弹性接缝密封胶的标准规范 |
Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements |
| ASTM D 5114-1990 |
机械浮选槽中煤的实验室泡沫浮选的标准试验方法 |
Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell |
| ASTM D 5063-1990 |
覆层适应形式认证的使用的标准指南 |
Standard Guide for Use of Certification of Coating Conformance Form |
| ASTM D 5120-1990 |
活性污泥处理中微生物培养时抑止呼吸的试验方法 |
Test Method for Inhibition of Respiration in Microbial Cultures in the Activated Sludge Process |
| ASTM D 5126-1990 |
现场比较法测定渗流区液体传导指数的标准指南 |
Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in the Vadose Zone |
| ASTM C 746-1990 |
港口堤岸用波纹状的石棉水泥薄板规格 |
Corrugated Asbestos-Cement Sheets for Bulkheading |
| ASTM C 725-1990 |
半密实的矿物纤维板壁规格 |
Semidense Mineral Fiber Siding |
| ASTM D 5058-1990 |
废弃物的筛选分析兼容性的试验方法 |
Test Methods for Compatibility of Screening Analysis of Waste |
| ASTM F 1168-1988 |
包装在挠性容器内的食品加热过程的确立 |
Use in the Establishment of Thermal Processes for Foods Packaged in Flexible Containers |
| ASTM D 5018-1989 |
煤焦油和石油硬沥青剪切粘度的试验方法 |
Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches |
| ASTM F 1101-1990 |
麻醉时用通风机标准规范 |
Standard Specification for Ventilators Intended for Use During Anesthesia |
| ASTM D 5004-1989 |
用二甲苯置换法对焙烧石油焦炭真密度的测试方法 |
Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement |
| ASTM C 821-1978 |
与火山灰掺和用石灰规格 |
Lime for Use with Pozzolans |
| ASTM F 957-1991 |
声音信号钟 |
Standard Specification for Gong, Sound Signaling |
| ASTM D 5040-1990 |
胶粘剂灰分的试验方法 |
Test Methods for Ash Content of Adhesives |
| ASTM D 4608-1989 |
洗涤剂中柠檬酸的试验方法 |
Test Method for Citrate in Detergents |
| ASTM D 3207-1992 |
地板表面擦亮薄膜耐洗涤剂的试验方法 |
Test Method for Detergent Resistance of Floor Polish Films |
| ASTM D 3206-1992 |
地板擦亮剂抗污物的试验方法 |
Test Method for Soil Resistance of Floor Polishes |
| ASTM E 1396-1990 |
辣椒油树脂感官评定的标准试验方法 |
Standard Test Method for Sensory Evaluation of Oleoresin Capsicum |
| ASTM E 1395-1990 |
低加热辣椒的感官评定试验方法 |
Test Method for Sensory Evaluation of Low Heat Chilies |
| ASTM C 927-1980 |
外表用陶瓷玻璃釉装饰的玻璃酒杯杯口及外缘析出铅和镉的标准试验方法 |
Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels |
| ASTM D 2985-1992 |
石棉颜色的试验方法 |
Standard Test Method for Color of Asbestos |
| ASTM D 4419-1990 |
差示扫描量热法(DSC)测量石油蜡转变温度的标准试验方法 |
Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC) |
| ASTM D 460-1991 |
皂和皂制品的化学分析取样试验方法 |
Standard Test Methods for Sampling and Chemical Analysis of Soaps and Soap Products |
| ASTM D 34-1991 |
白颜料化学分析的标准指南 |
Standard Guide for Chemical Analysis of White Pigments |
| ASTM E 41-1992 |
状态调节的有关术语 |
Terminology Relating to Conditioning |
| ASTM D 5346-1993 |
测定油乳液和软化化合物用石油润滑油倾点的试验方法 |
Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds |
| ASTM E 1151-1993 |
离子色谱法名词和相关术语标准规程 |
Standard Practice for Ion Chromatography Terms and Relationships |
| ASTM D 4721-1989 |
可机器洗涤的和干洗的床罩与附属品性能的评定 |
Evaluation of the Performance of Machine Washable and Drycleanable Bedcoverings and Accessories |
| ASTM D 4711-1989 |
烷基苯磺酸中磺酸与硫酸的标准试验方法 |
Standard Test Method for Sulfonic and Sulfuric Acids in Alkylbenzene Sulfonic Acids |
| ASTM E 932-1989 |
扩散式红外线分光计性能描述和测量的标准实施规范 |
Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers |
| ASTM D 3239-1991 |
高电离电压质谱法分析气体油芳烃馏分中芳烃类型的标准试验方法 |
Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry |
| ASTM E 103-1984 |
金属材料快速压痕硬度测试的标准试验方法 |
Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials |
| ASTM D 4553-1990 |
岩石蠕变特性现场测定的试验方法 |
Test Method for Determining In Situ Creep Characteristics of Rock |
| ASTM D 4818-1989 |
橡胶化合材料的分类.硫化加速剂 |
Classification for Rubber Compounding Materials - Vulcanization Accelerators |
| ASTM D 4572-1989 |
橡胶加工用化学药品的试验方法-硫磺的湿法筛选分析 |
Test Method for Rubber Chemicals - Wet Sieve Analysis of Sulfur |
| ASTM E 1398-1991 |
鼠体内肝细胞DNA修复化验 |
Standard Practice for the in vivo Rat Hepatocyte DNA Repair Assay |
| ASTM F 1097-1991 |
耐火灰浆(高温,空气凝固) |
Standard Specification for Mortar, Refractory (High-Temperature, Air-Setting) |
| ASTM D 4618-1992 |
烟气脱硫系统组件保护性衬砌的设计和制造 |
Standard Specification for Design and Fabrication of Flue Gas Desulfurization System Components for Protective Lining Application |
| ASTM D 4005-1992 |
塑料涂覆织物.聚氯乙烯弥散涂层的溶解度的试验方法 |
Standard Test Method for Plastic-Coated Fabrics - Completeness of Fusion of PVC Dispersion Coatings |
| ASTM F 362-1991 |
测定油墨色带消磁性试验方法 |
Test Method for Determining the Erasability of Inked Ribbons |
| ASTM D 5131-1990 |
电渗析/逆电渗析体系记录的保管的标准指南 |
Standard Guide for Record Keeping for Electrodialysis/Electrodialysis Reversal Systems |
| ASTM A 887-1989 |
核能设备用经硼酸处理的不锈钢板、薄板及带材 |
Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application |
| ASTM D 3904-1990 |
从油页岩中提取油的试验方法(用费歇尔分析法评定) |
Test Method for Oil from Oil Shale (Resource Evaluation by the Fischer Assay Procedure) |
| ASTM F 327-1978 |
用自动粒子监控器法对气体排污系统和部件的粒子污染物取样 |
Sampling Gas Blow down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method |
| ASTM D 5432-1993 |
公共机构和家用毛毯制品的标准性能规范 |
Standard Performance Specification for Blanket Products for Institutional and Household Use |
| ASTM D 4560-1992 |
工业和公共机构用纸巾 |
Paper Napkins for Industrial and Institutional Use |
| ASTM E 318-1991 |
用比色法测定水溶液中铀的试验方法 |
Test Method for Uranium in Aqueous Solutions by Colorimetry |
| ASTM F 392-1993 |
挠性阻挡层材料耐挠曲度的标准试验方法 |
Standard Test Method for Flex Durability of Flexible Barrier Materials |
| ASTM E 1464-1992 |
商用和研究用建筑物及设施的能源发展监督协议 |
Standard Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities |
| ASTM E 1463-1992 |
用来自美国西海岸的糠虾做静态和动态剧毒性试验的导则 |
Standard Guide for Conducting Static and Flow-Through Acute Toxicity Tests With Mysids From the West Coast of the United States |
| ASTM E 1459-1992 |
对物理性证据作标记及与之相关的文献工作 |
Physical Evidence Labeling and Related Documentation |
| ASTM B 607-1991 |
工程用自动催化镍硼铸件 |
Autocatalytic Nickel Boron Coatings for Engineering Use |
| ASTM C 1179-1991 |
室外加工碳素材料及石墨材料氧化质量损失标准试验方法 |
Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air |
| ASTM D 1287-1991 |
发动机冷却剂和防锈剂的pH值的试验方法 |
Standard Test Method for pH of Engine Coolants and Antirusts |
| ASTM C 1191-1991 |
陶瓷土和陶瓷泥釉的安全使用和搬运 |
Safe Use and Handling of Ceramic Clays and Slips |
| ASTM D 4841-1988 |
含有有机和无机组成物的水样品保留时间的估算 |
Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
| ASTM D 4838-1988 |
测定色漆相对着色力的试验方法 |
Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints |
| ASTM C 285-1988 |
湿磨和干磨搪瓷粉的筛选分析试验方法 |
Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel |
| ASTM C 279-1988 |
耐化学腐蚀砌块的标准规范 |
Standard Specification for Chemical-Resistant Masonry Units |
| ASTM G 10-1983 |
管道涂层比可弯性的试验方法 |
Standard Test Method for Specific Bendability of Pipeline Coatings |
| ASTM F 834-1984 |
玩具储蓄盒的安全使用规范 |
Consumer Safety Specification for Toy Chests |
| ASTM B 748-1990 |
用扫描电子显微镜测量横截面测定金属涂层厚度的方法 |
Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope |
| ASTM B 78-1990 |
电加热用铁铬铝合金的加速寿命的试验方法 |
Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating |
| ASTM B 76-1990 |
电加热用镍铬和镍铬铁合金的加速寿命的试验方法 |
Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating |
| ASTM B 70-1990 |
电加热用金属材料的电阻随温度而变化的试验方法 |
Standard Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating |
| ASTM E 386-1990 |
与高分辨率核磁共振(NMR)分光计有关的数据说明的标准实施规范 |
Standard Practice for Data Presentation Relating to High-Resolution Nuclear Magnetic Resonance (NMR) Spectroscopy |
| ASTM D 658-1991 |
鼓风磨蚀试验测定有机涂料耐磨性能试验方法 |
Test Method for Abrasion Resistance of Organic Coatings by Air Blast Abrasive |
| ASTM F 510-1993 |
用带喂磨料的磨蚀测试机测定弹性地板覆盖物耐磨性的标准试验方法 |
Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method |
| ASTM C 1060-1990 |
框架建筑物外壳内腔的绝热设施的温度记录检验 |
Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings |
| ASTM F 1424-1992 |
在全色复制器中利用单或双成分干调色剂评定调色剂使用法的测试 |
Standard Test Method for Estimating Toner Usage in Full-Color Copiers Utilizing Dry Mono- or Dual-Component Toners |
| ASTM F 1422-1992 |
管理民用搜索和救护工作中事故命令系统结构的应用 |
Using the Incident Command System Framework in Managing Civilian Search and Rescue Operations |
| ASTM C 1123-1990 |
石棉的可压缩性和恢复试验方法 |
Test Method for Compressibility and Recovery of Asbestos |
| ASTM D 5178-1998 |
有机覆层耐损伤的标准试验方法 |
Standard Test Method for Mar Resistance of Organic Coatings |
| ASTM D 6106-1997 |
地下蓄水层术语建立的标准指南 |
Standard Guide for Establishing the Nomenclature of Ground-Water Aquifers |
| ASTM D 6189-1997 |
有机涂层的化学去除剂的效果评价的标准操作规程 |
Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings |
| ASTM D 2053-1999 |
拉链耐光照色牢度的试验方法 |
Test Method for Colorfastness of Zippers to Light |
| ASTM D 6209-1998 |
环境空气中气态和颗粒多环芳香烃测定的标准试验方法(用气相色谱/质谱分析的背面吸着剂的滤膜的收集) |
Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis) |
| ASTM D 2067-1997 |
印刷油墨分散剂中粗颗粒的测试方法 |
Test Method for Coarse Particles in Printing Ink Dispersions |
| ASTM E 1931-1997 |
X射线康普顿散射断层摄影的标准指南 |
Standard Guide for X-Ray Compton Scatter Tomography |
| ASTM E 1909-1997 |
感官特征时间强度评价的标准指南 |
Standard Guide for Time-Intensity Evaluation of Sensory Attributes |
| ASTM D 6212-1999 |
通过氢解分析和比率量热术测定芳香化合物中硫总含量的标准试验方法 |
Standard Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Rateometric Colorimetry |
| ASTM B 415-1998 |
硬拉包铝钢丝标准规范 |
Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire |
| ASTM C 837-1999 |
粘土的亚甲蓝指数的标准试验方法 |
Standard Test Method for Methylene Blue Index of Clay |
| ASTM D 1422-1999 |
退捻加捻法测定单细纱捻数的标准试验方法 |
Standard Test Method for Twist in Single Spun Yarns by the Untwist-Retwist Method |
| ASTM D 5650-1997 |
纸张抗弯刚度标准试验方法(0-10泰伯刚度单位泰伯试验机) |
Standard Test Method for Resistance to Bending of Paper of Low Bending Stiffness (Taber-Type Tester in 0 to 10 Taber Stiffness Unit Configuration) |
| ASTM C 551-1998 |
石棉水泥纤维绝缘板标准规范 |
Standard Specification for Asbestos-Cement Fiberboard Insulating Panels |
| ASTM C 613/C 613M-1997 |
通过索格利特萃取法测定合成预浸料坯中组分含量的标准试验方法 |
Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction |
| ASTM D 5832-1998 |
活性炭样本中的活性挥发物测定的标准试验方法 |
Standard Test Method for Volatile Matter Content of Activated Carbon Samples |
| ASTM D 5828-1997 |
辅助冷却添加剂(SCAs)和发动机冷却浓缩剂兼容性的标准试验方法 |
Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates |
| ASTM C 611-1998 |
室温下炭加工品及石墨制品的电阻率的标准试验方法 |
Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature |
| ASTM D 3976-1992 |
化学分析用沉淀样品制备的标准实施规范 |
Standard Practice for Preparation of Sediment Samples for Chemical Analysis |
| ASTM D 2779-1992 |
估计气体在石油液中溶解度的标准试验方法 |
Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids |
| ASTM B 623-1993 |
韧性火法精炼高导电性铜精炼型材 |
Tough-Pitch Fire-Refined High-Conductivity Copper - Refinery Shapes |
| ASTM D 5245-1992 |
微生物分析用清洁的实验室玻璃器皿,塑料器皿和设备 |
Cleaning Laboratory Glassware, Plasticware and Equipment Used in Microbiological Analyses |
| ASTM F 1394-1992 |
测定从气体分配系统阀门产生的粒子成分的标准试验方法 |
Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves |
| ASTM F 1339-1992 |
急救医疗服务系统的组织和运作 |
Standard Guide for Organization and Operation of Emergency Medical Services Systems |
| ASTM E 1257-1993 |
用光谱化学分析法评定表面处理用研磨材料 |
Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis |
| ASTM E 1237-1993 |
安装耦合电阻应变仪 |
Standard Guide for Installing Bonded Resistance Strain Gages |
| ASTM D 4034-1992 |
机织家俱装饰织物接缝抗纱线滑移性的标准试验方法 |
Standard Test Method for Resistance to Yarn Slippage at the Sewn Seam in Woven Upholstery Fabrics |
| ASTM D 824-1994 |
用皱文纸测定吸水率的标准试验方法 |
Standard Test Method for Rate of Absorption of Water by Bibulous Papers |
| ASTM D 3652-1993 |
压合胶带的厚度试验方法 |
Test Method for Thickness of Pressure-Sensitive and Gummed Tapes |
| ASTM D 5130-1995 |
使用比降面积法迂回测量明渠水流流量的标准试验方法 |
Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method |
| ASTM D 3858-1995 |
用速度面积法测量明渠水流量的标准试验方法 |
Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method |
| ASTM F 1021-1995 |
商用洗碗碟机和洗玻璃器皿机用加料器,洗涤剂,漂清剂和消毒剂 |
Standard Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines |
| ASTM D 3713-1995 |
用小火焰测量实芯塑料对燃烧反应的试验方法 |
Test Method for Measuring Response of Solid Plastics to Ignition by a Small Flame |
| ASTM D 5610-1994 |
确定地下水流型初始条件的标准导则 |
Standard Guide for Defining Initial Conditions in Ground-Water Flow Modeling |
| ASTM D 3745-1995 |
水库、池塘、渠、沟用预制沥青衬里(暴露型)安装的标准实施规程 |
Standard Practice for Installation of Prefabricated Asphalt Reservoir, Pond, Canal, and Ditch Liner (Exposed Type) |
| ASTM D 4365-1995 |
测定催化剂微孔体积和沸石区域的标准试验方法 |
Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst |
| ASTM D 4035-1995 |
针织领带和围巾织物的标准性能规范 |
Standard Performance Specification for Knitted Necktie and Scarf Fabrics |
| ASTM F 1564-1995 |
电工用结构安装绝缘工作台标准规范 |
Standard Specification for Structure-Mounted Insulating Work Platforms for Electrical Workers |
| ASTM D 4697-1995 |
在用户实验室中维护试验方法的标准指南 |
Standard Guide for Maintaining Test Methods in the User's Laboratory |
| ASTM A 726M-1992 |
半成品型冷轧磁性迭片级钢(米制) |
Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types (Metric) |
| ASTM D 2719-1989 |
胶合板纵向剪切的标准试验方法 |
Standard Test Methods for Structural Panels in Shear Through-the-Thickness |
| ASTM D 2835-1989 |
混凝土铺面用预制压缩密封物安装用润滑剂的标准规范 |
Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements |
| ASTM F 1011-1986 |
对最初治理人员开设危险品处理训练课程 |
Standard Guide for Developing a Hazardous Materials Training Curriculum for Initial Response Personnel |
| ASTM E 1156-1988 |
暴露在合成非晶态硅土下的工作岗位的健康要求 |
Health Requirements for Occupational Exposure to Synthetic Amorphous Silica |
| ASTM F 727-1981 |
透明摄影胶片透光度的测量方法 |
Test Method for Measuring Transmittance of See-Through Photoplate |
| ASTM F 721-1981 |
标准管道组装件 |
Standard Specification for Gage Piping Assemblies |
| ASTM F 720-1981 |
接触过敏原用试验天竺鼠的标准实施规程:天竺鼠最大化敏感试验 |
Standard Practice for Testing Guinea Pigs for Contact Allergens: Guinea Pig Maximization Test |
| ASTM E 1133-1986 |
美国政府征购的已包装的实验室设备的性能试验 |
Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements |
| ASTM D 4002-1981 |
使皮面柔软鞋油的评定 |
Evaluation of Buffable Shoe Polish |
| ASTM F 1005-1991 |
采暖、通风与空调导管形状.设计配置的描述和识别 |
Standard Practice for HVAC Duct Shapes; Identification and Description of Design Configuration |
| ASTM B 39-1979 |
镍标准规范 |
Standard Specification for Nickel |
| ASTM D 1233-1988 |
韧皮纤维和叶纤维制双股线 |
Twine Made from Bast and Leaf Fibers |
| ASTM A 748/A 748M-1987 |
压力容器用静电铸造的白口铁-灰口铁双金属柱 |
Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use |
| ASTM B 136-1984 |
铝表面阳极镀层的着色阻力的测定方法 |
Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum |
| ASTM A 436-1984 |
奥氏体灰口铁铸件用标准规范 |
Standard Specification for Austenitic Gray Iron Castings |
| ASTM A 319-1971 |
高温无压部件用灰铁铸件 |
Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts |
| ASTM D 2947-1988 |
石棉纤维筛选分析的试验方法 |
Test Method for Screen Analysis of Asbestos Fibers |
| ASTM F 1404-1992 |
用熔融氢氧化钾腐蚀技术测试砷化镓结晶完整性的试验方法 |
Test Method for Crystallographic Perfection of Gallium Arsenide by Molten Potassium Hydroxide (KOH) Etch Technique |
| ASTM D 820-1993 |
含合成洗涤剂肥皂的化学分析标准试验方法 |
Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents |
| ASTM D 4431-1992 |
工业和公共机构用纸巾 |
Paper Towels for Industrial and Institutional Use |
| ASTM D 3974-1981 |
萃取沉积物中痕量元素的标准实施规程 |
Standard Practices for Extraction of Trace Elements from Sediments |
| ASTM D 3971-1989 |
纤维素中二氯甲烷可溶物的标准试验方法 |
Standard Test Method for Dichloromethane-Soluble Matter in Cellulose |
| ASTM D 3402-1993 |
焦炭用滚净筒试验方法 |
Test Method for Tumbler Test for Coke |
| ASTM D 3584-1983 |
施工用土壤和岩石的检索文件和报告规程 |
Indexing Papers and Reports on Soil and Rock for Engineering Purposes |
| ASTM D 4237-1990 |
蒸汽设备用橡胶软管的试验方法 |
Test Methods for Rubber Hose Used for Steam Applications |
| ASTM D 3709-1989 |
在低温至室温循环条件下油包水乳剂稳定性的标准试验方法 |
Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions |
| ASTM D 3708-1988 |
在幕帘涂蜡过程中用蜡量的标准试验方法 |
Standard Test Method for Weight of Wax Applied During Curtain Coating Operation |
| ASTM E 978-1992 |
化合物环境安危数学模型的评估 |
Evaluating Mathematical Models for the Environmental Fate of Chemicals |
| ASTM D 5311-1992 |
土壤的负荷控制三向疲劳强度的测试方法 |
Test Method for Load Controlled Cyclic Triaxial Strength of Soil |
| ASTM E 438-1992 |
实验室用玻璃器皿 |
Glasses in Laboratory Apparatus |
| ASTM F 1442-1992 |
作为评定纸功能的复印机和打印机的检验仪器使用 |
Using a Copier or Printer as a Test Instrument for Evaluating Paper Performance |
| ASTM F 1438-1993 |
用扫描隧道显微术法测定气体分配系统元件的表面粗糙度的测试方法 |
Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components |
| ASTM D 4083-1989 |
冻土的描述(人工目测法) |
Description of Frozen Soils (Visual-Manual Procedure) |
| ASTM D 3045-1992 |
无负荷塑料制品热老化的标准实施规程 |
Standard Practice for Heat Aging of Plastics Without Load |
| ASTM E 822-1992 |
用发射冰球法测定太阳能收集器覆盖材料对冰雹冲击抗力的标准实施规程 |
Standard Practice for Determining Resistance of Solar Collector Covers to Hail by Impact With Propelled Ice Balls |
| ASTM D 5095-1991 |
砖石工程中防水处理用硅烷,硅氧烷和硅烷-硅氧烷混合物中非挥发物含量的测试方法 |
Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments |
| ASTM D 2521-1976 |
运河、沟及池塘衬里用沥青 |
Asphalt Used in Canal, Ditch and Pond Lining |
| ASTM E 685-1993 |
液相色谱法用固定波长光度探测装置试验的标准实施规程 |
Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography |
| ASTM D 4552-1992 |
热混合循环试剂分类的标准规程 |
Standard Practice for Classifying Hot-Mix Recycling Agents |
| ASTM D 2001-1992 |
汽油和石脑油脱戊烷的标准试验方法 |
Standard Test Method for Depentanization of Gasoline and Naphthas |
| ASTM D 1744-1992 |
用卡尔-费歇尔试剂测定液态石油产品中水分的试验方法 |
Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent |
| ASTM D 2589-1988 |
石棉纤维的麦克涅特湿法分类的标准试验方法 |
Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber |
| ASTM D 2586-1968 |
玻璃增强塑料圆筒液体静压力强度的试验方法 |
Test Method for Hydrostatic Compressive Strength of Glass-Reinforced Plastic Cylinders |
| ASTM C 1213-1992 |
与预制混凝土制品相关的术语 |
Terminology Relating to Precast Concrete Products |
| ASTM C 435-1993 |
钢浇铸槽用耐火材料的分类 |
Classification of Steel Pouring Pit Fireclay Refractories |
| ASTM D 5175-1991 |
用微量萃取和气相色谱法对水中有机卤化农药和多氯联苯的试验方法 |
Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography |
| ASTM A 663/A 663M-1989 |
商品级碳素钢棒的机械特性 |
tandard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties |
| ASTM D 4444-1992 |
手提式湿度计的使用和校准用试验方法 |
Test Methods for Use and Calibration of Hand-Held Moisture Meters |
| ASTM E 190-1992 |
焊缝韧性的定向弯曲试验方法 |
Test Method for Guided Bend Test for Ductility of Welds |
| ASTM D 287-1992 |
原油和石油产品API比重的标准试验方法(液体比重计法) |
Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method) |
| ASTM D 167-1993 |
块焦表观比重、实际比重和孔隙度的标准试验方法 |
Standard Test Method for Apparent and True Specific Gravity and Porosity of Lump Coke |
| ASTM D 5193/D 5193M-1993 |
涂层织物的试验方法.空气保持性 |
Test Method for Coated Fabrics - Air Retention |
| ASTM F 521-1983 |
透明层压材料粘结完整性的标准试验方法 |
Standard Test Methods for Bond Integrity of Transparent Laminates |
| ASTM E 1082-1990 |
测量车行道路面粗糙度的行车响应曲线的标准试验方法 |
Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness |
| ASTM D 4143-1989 |
乳胶载色体剂的试验 |
Testing Latex Vehicles |
| ASTM D 4142-1989 |
环氧树脂的试验 |
Testing Epoxy Resins |
| ASTM D 4210-1989 |
实验室间质量控制程序及对低标准数据报告的讨论 |
Intralaboratory Quality Control Procedures and a Discussion on Reporting Low-Level Data |
| ASTM A 899-1991 |
环氧涂层钢丝 |
Steel Wire, Epoxy-Coated |
| ASTM C 869-1991 |
泡沫混凝土用生产预制泡沫材料用发泡剂 |
Foaming Agents Used in Making Preformed Foam for Cellular Concrete |
| ASTM C 946-1991 |
干式堆积的表面粘结的墙的构造 |
Construction of Dry-Stacked, Surface-Bonded Walls |
| ASTM A 896-1989 |
镀锌结构导电壳研究的标准规程 |
Standard Practice for Conducting Case Studies on Galvanized Structures |
| ASTM D 5217-1991 |
微粒离子交换材料污染和降解的检测 |
Detection of Fouling and Degradation of Particulate Ion Exchange Materials |
| ASTM D 5139-1990 |
核电厂用涂层定量检查用的样品制备标准规范 |
Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants |
| ASTM F 1311-1990 |
大直径制造的碳钢法兰 |
Standard Specification for Large-Diameter Fabricated Carbon Steel Flanges |
| ASTM F 1273-1991 |
防火用油罐通气孔 |
Standard Specification for Tank Vent Flame Arresters |
| ASTM F 1182-1990 |
阳极,镀锌合金 |
Standard Specification for Anodes, Sacrificial Zinc Alloy |
| ASTM D 5088-1990 |
在非放射性废弃物场地上用现场设备的净化 |
Decontamination of Field Equipment Used at Nonradioactive Waste Sites |
| ASTM D 2363-1979 |
羟基丙基甲基纤维素的标准试验方法 |
Standard Test Methods for Hydroxypropyl Methylcellulose |
| ASTM D 2358-1989 |
表面活性剂和合成洗涤剂中有效成分分离的标准试验方法 |
Standard Test Method for Separation of Active Ingredient from Surfactant and Syndet Compositions |
| ASTM D 2357-1974 |
用红外线吸收法进行表面活性剂的质量分类 |
Standard for Qualitative Classification of Surfactants by Infrared Absorption |
| ASTM D 2332-1984 |
用波长色散X射线荧光法作水沉积物分析标准操作规程 |
Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence |
| ASTM F 1346-1991 |
游泳池、温泉和热浴池用安全封盖物和所有封盖物标记要求的标准性能规范 |
Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs |
| ASTM D 2448-1985 |
用测量颜料浸出液电阻率法测定颜料中水溶性盐的标准试验方法 |
Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment |
| ASTM D 2423-1990 |
蜡纸或纸板上表面蜡的标准试验方法 |
Standard Test Method for Surface Wax on Waxed Paper or Paperboard |
| ASTM E 605-1993 |
喷涂到结构件上耐火材料厚度和密度的试验方法 |
Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
| ASTM E 251-1992 |
金属粘结电阻应变仪性能特征的标准试验方法 |
Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages |
| ASTM D 2505-1988 |
气相色谱法测定高纯度乙烯中乙烯、其它烃类和二氧化碳的标准试验方法 |
Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography |
| ASTM D 2504-1988 |
气相色谱法测定C2和轻质烃类产品中不凝缩气体的试验方法 |
Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography |
| ASTM D 4700-1991 |
渗流区土壤抽样的标准指南 |
Standard Guide for Soil Sampling from the Vadose Zone |
| ASTM D 2416-1984 |
焦油和硬沥青焦化值的(改进的康那底松)测试方法 |
Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson) |
| ASTM D 5172-1991 |
为水质分析操作程序提供资料 |
Documenting the Operating Procedures Used for the Analysis of Water |
| ASTM D 4548-1991 |
混合离子交换树脂的阴、阳离子平衡的试验方法 |
Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins |
| ASTM D 2506-1980 |
固态火箭推进剂方面的术语 |
Terminology Relating to Solid Rocket Propulsion |
| ASTM D 4793-1993 |
含水废弃物的连续成批萃取的试验方法 |
Test Method for Sequential Batch Extraction of Waste with Water |
| ASTM F 1179-1988 |
螺栓螺纹锁定厌氧复合物使用的检验程序 |
Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs |
| ASTM F 1221-1989 |
机构间的信息交换 |
Interagency Information Exchange |
| ASTM F 1218-1989 |
支气管镜(硬质的) |
Bronchoscopes (Rigid) |
| ASTM D 2218-1967 |
钼橙颜料的标准规范 |
Standard Specification for Molybdate Orange Pigments |
| ASTM E 141-1991 |
根据概率取样结果所得数据验收的标准实施规范 |
Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling |
| ASTM D 2296-1984 |
电容器用电绝缘聚丁烯油品质连续性 |
Continuity of Quality of Electrical Insulating Polybutene Oil for Capacitors |
| ASTM B 559-1993 |
电气用镀镍包铜钢丝 |
Nickel-Coated, Copper-Clad Steel Wire for Electronic Application |
| ASTM D 2987-1988 |
石棉纤维水分含量的标准测试方法 |
Standard Test Method for Moisture Content of Asbestos Fiber |
| ASTM D 4632-1991 |
土工织物的断裂荷载和延伸度的试验方法 |
Test Method for Grab Breaking Load and Elongation of Geotextiles |
| ASTM F 315-1970 |
航空航天流体中焊料和焊剂污染物的识别试验方法 |
Test Methods of Identification of Solder and Solder Flux Contaminants in Aerospace Fluids |
| ASTM F 917-1991 |
商业食品废弃物处置器 |
Commercial Food Waste Disposers |
| ASTM C 958-1992 |
用重力沉积的X射线监测器测定矾土或石英的粒度分布的试验方法 |
Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation |
| ASTM D 4784-1993 |
液化天然气(LNG)密度的计算方法 |
Standard for LNG Density Calculation Models |
| ASTM E 683-1991 |
单户和两户住房用太阳能空间加热系统安装和维护的标准实施规程 |
Standard Practice for Installation and Service of Solar Space Heating Systems for One- and Two-Family Dwellings |
| ASTM D 1783-1991 |
水中苯酚类化合物的测试方法 |
Test Methods for Phenolic Compounds in Water |
| ASTM E 1346-1990 |
感官评定用大量取样,搬运和制备食用植物油 |
Bulk Sampling, Handling and Preparing Edible Vegetable Oils for Sensory Evaluation |
| ASTM C 220-1991 |
石棉水泥平板 |
Flat Asbestos-Cement Sheets |
| ASTM F 954-1991 |
家庭的呼吸护理 |
Respiratory Home Care |
| ASTM C 854-1990 |
金属制反射管绝缘材料抗外部荷载力的测试方法 |
Test Method for Resistance to External Loads on Metal Reflective Pipe Insulation |
| ASTM C 1139-1990 |
军事用玻璃纤维绝热和隔音用覆盖层和板 |
Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications |
| ASTM D 3897-1991 |
铬黄碱性值皮革鞣制液的计算 |
Calculation of Basicity of Chrome Tanning Liquors |
| ASTM F 1288-1990 |
应对多起意外事故的计划用标准指南 |
Standard Guide for Planning for and Response to a Multiple Casualty Incident |
| ASTM D 3720-1990 |
X射线衍射法测定二氧化钛颜料中锐钛和金红石比率的试验方法 |
Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction |
| ASTM E 604-1983 |
金属材料的动态断裂试验方法 |
Standard Test Method for Dynamic Tear Testing of Metallic Materials |
| ASTM D 1576-1990 |
用炉烘干法测定羊毛内水分的试验方法 |
Test Method for Moisture in Wool by Oven-Drying |
| ASTM C 1129-1989 |
通过给凸面阀门及法兰增加热绝缘材料评估蓄热量的标准实施规程 |
Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges |
| ASTM D 3344-1990 |
波纹纸板总载蜡量的标准试验方法 |
Standard Test Method for Total Wax Content of Corrugated Paperboard |
| ASTM E 1415-1991 |
进行浮萍圆瘤G3的静态毒性试验的标准指南 |
Standard Guide for Conducting Static Toxicity Tests With Lemna gibba G3 |
| ASTM F 1330-1991 |
金属研磨法除去管内氧化皮 |
Standard Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe |
| ASTM F 96-1977 |
锻制的铜和镍电子级合金 |
Electronic Grade Alloys of Copper and Nickel in Wrought Forms |
| ASTM E 1408-1991 |
门板和门系统声衰减的实验室测量方法 |
Test Method for Laboratory Measurement of the Sound Transmission Loss of Door Panels and Door Systems |
| ASTM F 21-1965 |
用雾化试验器作疏水表面薄膜的试验方法 |
Test Method for Hydrophobic Surface Films by the Atomizer Test |
| ASTM F 1313-1990 |
橡皮奶头上的橡胶短接管中挥发性N-亚硝胺含量的等级 |
Volatile N-Nitrosamine Levels in Rubber Nipples on Pacifiers |
| ASTM F 119-1982 |
挠性阻挡层材料润滑脂渗透率的试验方法 |
Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method) |
| ASTM E 354-1993 |
高温钢、电工钢、磁钢和其它类似的铁、镍和钴合金化学分析的标准试验方法 |
Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
| ASTM E 353-1993 |
不锈钢、耐热钢、马氏体钢和其它类似的铬镍铁合金化学分析的标准试验方法 |
Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| ASTM E 868-1982 |
资源回收开发系统用机械输送设备性能试验的试验方法 |
Test Methods for Conducting Performance Tests on Mechanical Conveying Equipment Used in Resource Recovery Systems |
| ASTM E 424-1971 |
簿板材料的太阳能传播和反射的试验方法 |
Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials |
| ASTM E 106-1983 |
铜铍合金的化学分析标准试验方法 |
Standard Test Methods for Chemical Analysis of Copper-Beryllium Alloys |
| ASTM D 5221-1992 |
空气中甲醛连续测量的试验方法 |
Test Method for Continuous Measurement of Formaldehyde in Air |
| ASTM D 2713-1991 |
丙烷干燥性的标准试验方法(阀冻结法) |
Standard Test Method for Dryness of Propane (Valve Freeze Method) |
| ASTM D 2712-1991 |
气相色谱法对丙烯浓缩物中痕量烃的标准试验方法 |
Standard Test Method for Hydrocarbon Traces in Propylene Concentrates By Gas Chromatography |
| ASTM C 720-1989 |
升温用的喷制纤维绝热材料的规格 |
Spray-Applied Fibrous Thermal Insulation for Elevated Temperature |
| ASTM D 3500-1990 |
胶合板承受拉力的标准试验方法 |
Standard Test Methods for Structural Panels in Tension |
| ASTM D 2511-1993 |
固态薄膜润滑剂热震敏感度的标准试验方法 |
Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants |
| ASTM D 3409-1993 |
沥青屋顶胶粘剂对潮湿表面、湿表面和水下表面粘着性的试验方法 |
Test Method for Adhesion of Asphalt-Roof Cement to Damp, Wet or Underwater Surfaces |
| ASTM D 5108-1990 |
海水中防污涂层体系有机物扩散速度的测试方法 |
Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water |
| ASTM E 133-1992 |
蒸馏设备的标准规范 |
Standard Specification for Distillation Equipment |
| ASTM F 1417-1992 |
使用低压空气对塑料自流排水管道安装验收方法 |
Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air |
| ASTM D 5440-1993 |
测定脂肪和油熔点的试验方法 |
Test Method for Determining the Melting Point of Fats and Oils |
| ASTM D 2807-1993 |
皮革中氧化铬的测试方法(高氯酸氧化) |
Test Method for Chromic Oxide in Leather (Perchloric Acid Oxidation) |
| ASTM D 4787-1993 |
对混凝土底层使用的液体或薄板衬垫的连续验正 |
Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates |
| ASTM D 4502-1992 |
木材粘结接头耐热和耐水性的标准试验方法 |
Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints |
| ASTM D 1829-1990 |
升高温度时陶磁材料电阻的测试方法 |
Test Method for Electrical Resistance of Ceramic Materials at Elevated Temperatures |
| ASTM D 3480-1988 |
防止儿童开启的快速啮合包装品所需开启或使活动的拉力的试验方法 |
Test Methods for Downward Force Required to Open or Activate Child-Resistant Snap-Engagement Packages |
| ASTM F 1373-1993 |
气体分配系统组件用自动阀的周期寿命测定的标准试验方法 |
Standard Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components |
| ASTM D 2890-1992 |
石油馏分燃料液体热容量计算的标准试验方法 |
Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels |
| ASTM D 2020-1992 |
纸和纸板的耐霉性的测试方法 |
Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard |
| ASTM C 693-1993 |
用浮力法测定玻璃密度的试验方法 |
Test Method for Density of Glass by Buoyancy |
| ASTM D 3233-1993 |
液态润滑剂极压性能的试验方法(润滑油耐热耐压法) |
Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods) |
| ASTM B 797-1993 |
粉末锻钢部件中表面指状氧化物穿透深度和粒子间氧化物网状组织出现的标准测试方法 |
Standard Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (P/F) Steel Parts |
| ASTM D 5273-1992 |
丙烯提浓物的分析 |
Standard Guide for Analysis of Propylene Concentrates |
| ASTM C 620-1992 |
硬沥青基承重耐熔砖的耐水化作用的试验方法 |
Test Method for Hydration Resistance of Pitch-Bearing Basic Refractory Brick |
| ASTM D 2180-1989 |
漂白化合物中活性氧的标准试验方法 |
Standard Test Method for Active Oxygen in Bleaching Compounds |
| ASTM D 4898-1990 |
用重量分析法对水流中不溶杂质的试验方法 |
Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis |
| ASTM D 4864-1990 |
用气相色谱法测定丙烯浓缩物中痕量甲醇的标准试验方法 |
Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography |
| ASTM D 2945-1990 |
绝缘油的气体含量的试验方法 |
Test Method for Gas Content of Insulating Oils |
| ASTM D 2929-1989 |
用X射线荧光法测定纤维素材料中硫含量的标准试验方法 |
Standard Test Method for Sulfur Content of Cellulosic Materials by X-Ray Fluorescence |
| ASTM D 5099-1993 |
使用毛细管流变仪对橡胶加工性能的测试方法 |
Test Methods for Rubber of Processing Properties Using Capillary Rheometry |
| ASTM C 201-1993 |
耐火材料导热性的标准试验方法 |
Standard Test Method for Thermal Conductivity of Refractories |
| ASTM D 3038-1993 |
焦炭跌落粉碎标准试验方法 |
Standard Test Method for Drop Shatter Test for Coke |
| ASTM D 3037-1993 |
炭黑的试验方法.用氮吸收法测定其表面积 |
Test Methods for Carbon Black - Surface Area by Nitrogen Adsorption |
| ASTM F 1471-1993 |
高效粒子空气过滤器系统空气净化功能的试验方法 |
Standard Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air- Filter System |
| ASTM F 1440-1992 |
无扭转装有金属杆的髋关节成型术股骨部件的循环疲劳检验 |
Standard Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty Femoral Components Without Torsion |
| ASTM D 4144-1994 |
紫外线固化涂层包装耐久性评估的标准试验方法 |
Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing |
| ASTM D 2981-1994 |
摆动中固态膜润滑剂磨损寿命的标准试验方法 |
Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion |
| ASTM D 3019-1994 |
用于无纤维增强、石棉纤维增强和无石棉的纤维增强沥青屋顶卷材的搭接胶粘剂标准规范 |
Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non Fibered, Asbestos Fibered, and Non Asbestos Fibered |
| ASTM D 1243-1995 |
氯乙烯聚合物的稀溶液粘度的标准试验方法 |
Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers |
| ASTM D 861-1995 |
用特克斯制命名纤维,纱的半制品,纱和其它纺织品线度的标准操作规程 |
Standard Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns |
| ASTM D 4504-1994 |
无害货物的工业运输用模制聚乙烯开口桶标准规范 |
Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods |
| ASTM F 585-1994 |
聚乙烯软管同现有污水管插接 |
Standard Practice for Insertion of Flexible Polyethylene Pipe Into Existing Sewers |
| ASTM F 779-1993 |
高山滑雪板的扭转特性的测试方法 |
Standard Test Method for Torsion Characteristic of Alpine Skis |
| ASTM D 4386-1995 |
多层地板砖和地板维护用地板抛光剂应用的标准实施规程 |
Standard Practice for Application of Floor Polishes to Maintain Multilayer Composite Tile or Flooring |
| ASTM B 879-1997 |
镁和镁合金上非电解质转换涂层的标准规范 |
Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys |
| ASTM B 878-1997 |
电气接触和连接件毫微秒间隙检测的标准试验方法 |
Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors |
| ASTM B 830-1997 |
均匀试验方法和频率标准规范 |
Standard Specification for Uniform Test Methods and Frequency |
| ASTM D 6050-1997 |
有机液体有害废物中不溶固体测定的标准试验方法 |
Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste |
| ASTM D 3918-1996 |
有关增强塑料挤拉制品的标准术语 |
Standard Terminology Relating to Reinforced Plastic Pultruded Products |
| ASTM D 3917-1996 |
热固性玻璃纤维增强塑料挤拉制型材尺寸公差的标准规范 |
Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes |
| ASTM F 801-1996 |
透明部件光学角度偏差测量的标准试验方法 |
Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts |
| ASTM D 3887-1996 |
针织物公差的标准规范 |
Standard Specification for Tolerances for Knitted Fabrics |
| ASTM F 1722-1996 |
高山滑橇质量与惯性矩测定的标准试验方法 |
Standard Test Method for Determining Mass and Moment of Inertia of Alpine Skis |
| ASTM F 1719-1996 |
影像干扰的定向探测系统的标准规范 |
Standard Specification for Image-Interactive Stereotactic and Localization Systems |
| ASTM E 172-1990 |
在发射光谱化学分析中激发源的描述和定义 |
Describing and Specifiying the Excitation Source in Emission Spectrochemical Analysis |
| ASTM E 62-1989 |
铜和铜合金的化学分析标准试验方法(光度测定法) |
Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods) |
| ASTM C 1206-1991 |
铁(II)/铬(VI)安培计滴定法测定钚的试验方法 |
Test Method for Plutonium by Iron (II)/ Chromium (VI) Amperometric Titration |
| ASTM C 745-1992 |
用有防护的平板蒸发量热计测定通过真空绝热材料热通量的试验方法 |
Test Method for Heat Flux Through Evacuated Insulations Using a Guarded Flat Plate Boiloff Calorimeter |
| ASTM D 776-1992 |
干热对纸和纸板特性的影响的试验方法 |
Standard Test Method for Determination of Effect of Dry Heat on Properties of Paper and Board |
| ASTM B 693-1991 |
银镍电接触材料 |
Standard Specification for Silver-Nickel Electrical Contact Materials |
| ASTM C 1204-1991 |
在有钚存在的情况下经铬(VI)滴定后用磷酸中铁(II)量减少法测定铀的试验方法 |
Test Method for Uranium in the Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration |
| ASTM D 5381-1993 |
颜料和填充剂的X射线萤光(XRF)光谱分析 |
X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders |
| ASTM D 5380-1993 |
用X射线绕射分析法鉴定涂料中结晶颜料和填充剂的标准试验方法 |
Standard Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis |
| ASTM D 5377-1993 |
橡胶配料的标准分类.底煤 |
Standard Classification for Rubber Compounding Materials - Ground Coal |
| ASTM D 5374-1993 |
电绝缘评定用实验室强制对流炉的标准试验方法 |
Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
| ASTM D 5231-1992 |
测定未处理的城市固体废弃物成分的标准试验方法 |
Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste |
| ASTM D 5229/D 5229M-1992 |
高聚物基体合成材料水分吸收性能和平衡条件的标准试验方法 |
Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials |
| ASTM D 4891-1989 |
用化学计量燃烧法在天然气系列中煤气的发热值的试验方法 |
Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion |
| ASTM C 1004-1984 |
轻水堆废燃料接收和贮存用容器 |
Matrix for LWR Spent Fuel Receiving and Storage |
| ASTM D 5244-1992 |
水中肠道病毒的复原的标准操作规程 |
Standard Practice for Recovery of Enteroviruses from Waters |
| ASTM D 5242-1992 |
有薄板堰水的明渠流量测量的试验方法 |
Test Method for Open-Channel Flow Measurement of Water with Thin-Plate Weirs |
| ASTM D 5246-1992 |
水中绿脓杆菌的分离和计数的标准试验方法 |
Standard Test Method for Isolation and Enumeration of Pseudomonas aeruginosa from Water |
| ASTM E 1471-1992 |
计算机处理的材料性能数据库中纤维、填充料和磁心材料的识别 |
Standard Guide for Identification of Fibers, Fillers, and Core Materials in Computerized Material Property Databases |
| ASTM D 4994-1989 |
废水污垢中毒素的分离 |
Standard Practice for Recovery of Viruses from Wastewater Sludges |
| ASTM D 4993-1989 |
为反向渗透标定二氧化硅的计算和校正 |
Standard Practice for Calculation and Adjustment of Silica (SiO2) Scaling for Reverse Osmosis |
| ASTM E 1332-1990 |
室外-室内透过等级测定用分类 |
Standard Classification for Determination of Outdoor-Indoor Transmission Class |
| ASTM F 783-1988 |
U型环、扶手杆、手柄及蹬形梯级 |
Standard Specification for Staple, Handgrab, Handle, and Stirrup Rung |
| ASTM B 600-1991 |
钛及钛合金表面的去垢和清洗 |
Descaling and Cleaning Titanium and Titanium Alloy Surfaces |
| ASTM A 626M-1990 |
锡轧制品.二次压延的电解镀锡板(米制) |
Tin Mill Products, Electrolytic Tin Plate, Double Reduced (Metric) |
| ASTM A 577/A 577M-1990 |
钢板的超声角波束检验 |
Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates |
| ASTM B 9-1990 |
青铜制电车架空线的标准规范 |
Standard Specification for Bronze Trolley Wire |
| ASTM D 4686-1991 |
频率分布的识别和转换 |
Identification and Transformation of Frequency Distributions |
| ASTM C 585-1990 |
公称尺寸的管子(NPS系统)用刚性热绝缘材料的内外直径的标准实施规程 |
Standard Practice for Inner and Outer Diameters of Rigid Thermal Insulation for Nominal Sizes of Pipe and Tubing (NPS System)) |
| ASTM F 1172-1988 |
容积式燃料油流量计 |
Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type |
| ASTM F 1175-1988 |
多种比较用个人计算机打印机的检测仪的使用 |
Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison |
| ASTM E 1339-1990 |
计算机管理材料性能数据库中铝合金和零件的识别 |
Identification of Aluminum Alloys and Parts in Computerized Material Property Databases |
| ASTM E 1337-1990 |
用参考试验轮胎测定纵向峰值制动系数的测试方法 |
Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire |
| ASTM E 1323-1989 |
实验室测量规程的评估和结果数据的统计分析 |
Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data |
| ASTM E 1322-1990 |
实验室认可体系评定员的选择,训练和评估 |
Selection, Training and Evaluation of Assessors for Laboratory Accreditation Systems |
| ASTM D 2048-1992 |
地板擦亮膜粉化的测试方法 |
Test Method for Powdering of Floor Polish Films |
| ASTM D 720-1991 |
煤自由膨胀指数的试验方法 |
Test Method for Free-Swelling Index of Coal |
| ASTM E 739-1991 |
线性或线性化应力寿命(S-N)和应变寿命(-N)疲劳数据的统计分析用标准实施规程 |
Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (-N) Fatigue Data |
| ASTM E 728-1991 |
粒状载体与粒状农药耐磨性的试验方法 |
Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides |
| ASTM C 859-1992 |
核材料用术语 |
Terminology Relating to Nuclear Materials |
| ASTM D 5187-1991 |
用X射线衍射法测定焙烧石油焦结晶大小的试验方法 |
Standard Test Method for Determination of Crystallite Size (Lc) of Calcined Petroleum Coke by X-Ray Diffraction |
| ASTM D 3879-1991 |
角闪石石棉取样的标准试验方法 |
Standard Test Method for Sampling Amphibole Asbestos |
| ASTM D 4486-1991 |
挥发性和活性液体运动粘度的标准试验方法 |
Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids |
| ASTM D 4054-1993 |
添加剂与航空涡轮机燃料和飞机燃烧体系材料相容性评价的标准实施规程 |
Standard Practice for Evaluating the Compatibility of Additives with Aviation-Turbine Fuels and Aircraft Fuel System Materials |
| ASTM D 293-1993 |
焦炭的筛析标准试验方法 |
Standard Test Method for the Sieve Analysis of Coke |
| ASTM C 1226-1993 |
石棉中可溶氯化物的标准试验方法 |
Standard Test Method for Soluble Chlorides in Asbestos |
| ASTM D 5150-1992 |
建筑涂料用滚子遮盖率的试验方法 |
Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
| ASTM D 4286-1990 |
核动力发电机装置涂覆承包人的资格鉴定 |
Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities |
| ASTM D 4285-1983 |
压缩空气中指示油或水的标准试验方法 |
Standard Test Method for Indicating Oil or Water in Compressed Air |
| ASTM E 763-1991 |
用分界箔测量数据计算来自中子辐射的吸收剂量 |
Calculation of Absorbed Dose from Neutron Irradiation by Application of Threshold-Foil Measurement Data |
| ASTM E 1077-1991 |
估计钢样品脱碳深度的试验方法 |
Test Methods for Estimating the Depth of Decarburization of Steel Specimens |
| ASTM E 1059-1991 |
非石墨反电极的形状和尺寸的标示 |
Designating Shapes and Sizes of Nongraphite Counter Electrodes |
| ASTM D 2245-1990 |
溶剂可还原的涂料中油类及油酸类鉴定的标准试验方法 |
Standard Test Method for Identification of Oils and Oil Acids in Solvent-Reducible Paints |
| ASTM D 5228-1992 |
测定活性碳的丁烷工作能力的标准试验方法 |
Standard Test Method for Determination of Butane Working Capacity of Activated Carbon |
| ASTM F 586-1979 |
衬垫的漏泄率与"y"应力和"m"因子关系曲线的试验方法 |
Test Method for Leak Rates Versus y Stresses and m Factors for Gaskets |
| ASTM D 452-1991 |
沥青层面制品表面修整用非粒状矿物的筛分试验方法 |
Sieve Analysis of Surfacing for Asphalt Roofing Products |
| ASTM D 2462-1990 |
用甲苯蒸馏法测定羊毛中水分的试验方法 |
Test Method for Moisture in Wool by Distillation with Toluene |
| ASTM F 1067-1992 |
用单通道,恒速法测量石油产品过滤器心子性能的试验方法 |
Test Method for Determining the Performance of a Petroleum Product Filter Cartridge Using a Single-Pass Constant Rate Procedure |
| ASTM F 1338-1991 |
船用主动力中速柴油发动机覆盖性能和机组最小工作范围 |
Main Propulsion Medium Speed Marine Diesel Engines Covering Performance and Minimum Scope of Assembly |
| ASTM F 1337-1991 |
海船和海洋系统、设备用人体工效要求 |
Standard Practice for Human Engineering Program Requirements for Ships and Marine Systems, Equipment, and Facilities |
| ASTM F 1333-1991 |
消防和泡沫灭火站操纵室结构 |
Standard Specification for Construction of Fire and Foam Station Cabinets |
| ASTM D 4738-1990 |
使用光基准线法对立式圆柱形容器的校验 |
Calibration of Upright Cylindrical Tanks Using the Optical Reference Line Method |
| ASTM F 1304-1990 |
弹性地板砖挠曲性试验方法 |
Test Method for Deflection of Resilient Floor Tile |
| ASTM F 1306-1990 |
挠性阻挡层和叠层板材抗慢速渗透性的试验方法 |
Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates |
| ASTM C 1192-1991 |
陶瓷釉料的安全喷射 |
Safe Spraying of Ceramic Glazes |
| ASTM C 872-1989 |
从搪瓷表面析出铅及镉的试验方法 |
Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces |
| ASTM B 252-1992 |
电镀层和转化涂层用锌合金压模铸件的制备 |
Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings |
| ASTM F 592-1984 |
有关检验和连接紧固件及其操作工具的标准术语 |
Standard Terminology of Collated and Cohered Fasteners and Their Application Tools |
| ASTM F 1331-1991 |
电气和电子操作室中可移动板上乙烯铺面覆盖物的安装程序 |
Installation Procedures of Vinyl Deck Coverings on Portable Plates in Electrical and Electronic Spaces |
| ASTM C 1020-1984 |
轻水堆燃料回收用容器 |
Matrix for Light Water Reactor Fuel Reprocessing |
| ASTM C 1010-1983 |
核燃料再加工设备的验收、检测和操作前试验 |
Acceptance, Checkout and Pre-Operational Testing of a Nuclear Fuels Reprocessing Facility |
| ASTM D 5049-1990 |
废弃物中氰化物筛选的试验方法 |
Test Method for the Screening of Cyanides in Waste |
| ASTM D 4908-1989 |
皮革面层的粘合性的测试方法 |
Test Method for Tackiness of Finish on Leather |
| ASTM A 543/A 543M-1993 |
压力容器用经回火和淬火的镍铬钼合金钢板的标准规范 |
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum |
| ASTM A 533/A 533M-1993 |
压力容器用经回火和淬火的锰钼及锰钼镍合金钢板 |
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
| ASTM D 4866-1988 |
含矿物集料和附加聚合物掺合料的煤焦油沥青乳化液铺面密封料搅拌配方的标准性能规范 |
Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures |
| ASTM D 4843-1988 |
固体废弃物的浸湿和烘干的试验方法 |
Test Method for Wetting and Drying Test of Solid Wastes |
| ASTM D 490-1992 |
路用柏油的标准规范 |
Standard Specification for Road Tar |
| ASTM E 1092-1991 |
一次性的微型福林玻璃吸管的标准规范 |
Standard Specification for Glass Micro Folin Pipet, Disposable |
| ASTM D 4773-1993 |
丙二醇－甲基醚、双丙二醇－甲基醚和丙二醇－甲基醚乙酸酯纯度的试验方法 |
Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether and Propylene Glycol Monomethyl Ether Acetate |
| ASTM D 4507-1993 |
热塑性聚合(TPES)材料 |
Thermoplastic Polyester (TPES) Materials |
| ASTM D 1755-1992 |
聚氯乙烯树脂标准规范 |
Standard Specification for Poly(Vinyl Chloride) Resins |
| ASTM D 1224-1992 |
纸中锌和镉的试验方法 |
Standard Test Methods for Zinc and Cadmium in Paper |
| ASTM D 2474-1992 |
氯乙烯共聚树脂 |
Vinyl Chloride Copolymer Resins |
| ASTM C 605-1992 |
耐火粘土制喷嘴和套管的二次加热变化的试验方法 |
Test Method for Reheat Change of Fireclay Nozzles and Sleeves |
| ASTM D 3788-1989 |
家用喷漆罐喷射方向标示的规定 |
Practice to Indicate Direction of Spray from a Can of Consumer Spray Paint |
| ASTM C 1119-1990 |
石棉水泥混合料真空排放的标准试验方法 |
Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes |
| ASTM B 762-1990 |
金属涂层和无机物涂层的不同抽样 |
Variables Sampling of Metallic and Inorganic Coatings |
| ASTM B 742-1990 |
电接触用已加工优质银材料标准规范 |
Standard Specification for Fine Silver Electrical Contact Fabricated Material |
| ASTM D 4296-1983 |
硬沥青的采样 |
Standard Practice for Sampling Pitch |
| ASTM D 4295-1989 |
橡胶配料-氧化锌的分类 |
Classification for Rubber Compounding Materials - Zinc Oxide |
| ASTM G 84-1989 |
在大气腐蚀测试中表面暴露在潮湿条件下湿润时间的测量 |
Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing |
| ASTM F 832-1990 |
安全密封件的标准分类 |
Standard Classification for Security Seals |
| ASTM D 4252-1989 |
乙氧基乙醇和乙氧基烷基酚的化学分析方法 |
Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates |
| ASTM D 4251-1989 |
用电势滴定法测定阴离子表面活性剂中活性物质含量的标准试验方法 |
Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration |
| ASTM E 1093-1991 |
一次性的凝血酶原玻璃吸管的标准规范 |
Standard Specification for Glass Prothrombin Pipet, Disposable |
| ASTM F 733-1990 |
用双曝光法测定透明部件的光学畸变和偏差的标准实施规范 |
Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method |
| ASTM F 839-1983 |
用户使用的便携式汽油容器的警告标莶 |
Cautionary Labeling of Portable Gasoline Containers for Consumer Use |
| ASTM E 630-1991 |
线虫防治药的评定准则-植物的反应性 |
Evaluation of Nematode Control Agents - Plant Responses |
| ASTM E 628-1991 |
线虫防治药的野外评定准则-试验材料及环境条件 |
Field Evaluation of Nematode Control Agents - Test Materials and Environmental Conditions |
| ASTM E 612-1991 |
线虫防治药的野外评定准则-地点选择程序 |
Field Evaluation of Nematode Control Agents - Site Selection Procedures |
| ASTM D 4264-1990 |
室内储水管用橡胶衬里的消防软管和橡胶增强软管的组合件的压力试验方法 |
Test Method for Pressure Testing of Assemblies of Rubber-Lined Fire Hose and Rubber Booster Hose in Service on Interior Standpipes |
| ASTM C 813-1990 |
用接触角测量法测定玻璃表面上疏水污物量的标准试验方法 |
Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement |
| ASTM F 1318-1990 |
使用不同配置的静电复制设备生产能力的测试方法 |
Test Method for Determination of Productivity Using Electrostatic Copy Machines with Various Configurations |
| ASTM F 1322-1990 |
船上焚烧装置的选择 |
Standard Guide for Selection of Shipboard Incinerators |
| ASTM D 5074-1990 |
使用部分萃取法的大量和微量无机成分分析用天然杂矿石沉淀物标样制备的标准实施规范 |
Standard Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures |
| ASTM F 1280-1990 |
在淡水及其它内陆环境、非渗透层上使用浮油分散剂的生态条件 |
Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and Other Inland Environments, Impermeable Surfaces |
| ASTM D 3195-1990 |
转子流量计校准的标准实施规程 |
Standard Practice for Rotameter Calibration |
| ASTM C 1162-1990 |
石棉散装密度试验方法 |
Test Method for Loose Density of Asbestos |
| ASTM C 876-1991 |
混凝土中未涂覆的预应力钢筋的半电池电势的试验方法 |
Test Method for Half-Cell Potentials of Uncoated Reinforcing Steel in Concrete |
| ASTM D 2485-1991 |
评定高温设备用覆层的试验方法 |
Test Methods for Evaluating Coatings for High Temperature Service |
| ASTM C 1165-1990 |
用控制电位库仑计法在铂工作电极上测定硫酸中钚的标准试验方法 |
Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H 2SO4 at a Platinum Working Electrode |
| ASTM C 1134-1990 |
部分浸入后刚性热绝缘材料水分保持标准试验方法 |
Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion |
| ASTM C 401-1991 |
可浇注耐火材料的分类方法 |
Classification of Alumina and Alumina-Silicate Castable Refractories |
| ASTM D 4797-1988 |
含铬酸铅和二氧化酞的白色和黄色热塑性交通标志的化学和重量分析的标准试验方法 |
Standard Test Methods for Chemical and Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking Containing Lead Chromate and Titanium Dioxide |
| ASTM F 681-1982 |
支路连接的应用 |
Standard Practice for Use of Branch Connections |
| ASTM A 435/A 435M-1990 |
钢板的直射束纵向超声波检验 |
Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates |
| ASTM E 1393-1990 |
用尖状往复式抛光机械测定沥青路面及样品精整性的试验方法 |
Test Method for Determining the Polishability of Bituminous Pavement Surfaces and Specimens by Means of the Penn State Reciprocating Polishing Machine |
| ASTM D 5042-1990 |
评定微粒子的阴离子交换树脂有机污染物的试验方法 |
Standard Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins |
| ASTM E 1380-1990 |
多刻度的0.1毫升或稍大容量的实验室吸管(不包括一次性的凝血酶原和微型滴管)的色码的标准规范 |
Standard Specification for Color Coding of Laboratory Pipets with Multiple Graduations, 0.1 mL and Larger, But Excluding Disposable Prothrombin and Disposable Micropipets |
| ASTM E 992-1984 |
用等效能量研究法测定钢破裂韧性 |
Determination of a Fracture Toughness of Steels Using Equivalent Energy Methodology |
| ASTM E 1379-1990 |
实验室玻璃杜瓦瓶 |
Laboratory Glass Dewar Flask |
| ASTM F 1287-1990 |
提供应急医疗护理的急救应答器性能范围 |
Scope of Performance of First Responders Who Provide Emergency Medical Care |
| ASTM F 1286-1990 |
1级儿科休克护理设备的研制和操作的标准指南 |
Standard Guide for Development and Operation of Level 1 Pediatric Trauma Facilities |
| ASTM F 1285-1990 |
急救医务人员实施对患者检查的技术培训用标准指南 |
Standard Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Examination Techniques |
| ASTM D 3066-1991 |
加标签气溶胶包装件 |
Labeling Aerosol Packages |
| ASTM D 3901-1990 |
民用园林软管 |
Consumer Product Garden Hose |
| ASTM D 4472-1989 |
反渗透系统的记录保持 |
Recordkeeping for Reverse Osmosis Systems |
| ASTM D 1157-1991 |
轻质烃总抑制剂含量(TBC)的标准试验方法 |
Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons |
| ASTM A 609/A 609M-1991 |
碳素钢,低合金钢和马氏体不锈钢铸件及其超声波检验 |
Castings, Carbon, Low-Alloy and Martensitic Stainless Steel, Ultrasonic Examination Thereof |
| ASTM C 983-1991 |
液体金属快速增殖反应堆中金属芯构件的化学分析和仪器分析的方法 |
Test Methods for Chemical and Instrumental Analysis of Metallic Core Components in Liquid Metal Fast-Breeder Reactors (LMFBR) |
| ASTM D 5057-1990 |
废弃物的堆积密度和筛选表观比重的试验方法 |
Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste |
| ASTM E 951-1994 |
施用于皮肤上的非商品化驱蚊剂配方的实验室试验的测试方法 |
Standard Test Methods for Laboratory Testing of Non-Commercial Mosquito Repellent Formulations On the Skin |
| ASTM E 1442-1994 |
高速公路交通监视 |
Standard Practice for Highway-Traffic Monitoring |
| ASTM C 424-1993 |
用热压处理法测定焙烧卫生釉瓷抗破裂性的标准试验方法 |
Standard Test Method for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment |
| ASTM C 419-1994 |
胶泥绝热涂层的试样制作与养护的标准实施指南 |
Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings |
| ASTM B 712-1993 |
氧化银镉接触材料用钠和钾含量的测定标准指南 |
Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials |
| ASTM E 1561-1993 |
应变片花数据分析标准规范 |
Standard Practice for Analysis of Strain Gage Rosette Data |
| ASTM F 1457-1994 |
与激光打印机相关的术语 |
Standard Terminology Relating to Laser Printers |
| ASTM B 449-1993 |
铝的铬酸盐处理标准规范 |
Standard Specification for Chromates on Aluminum |
| ASTM D 3711-1995 |
液体在薄膜和蒸气中沉积倾向的标准试验方法 |
Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors |
| ASTM D 3702-1994 |
用止推垫圈试验机测定自润滑磨擦接触中材料磨损速率和摩擦系数的标准试验方法 |
Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine |
| ASTM D 3695-1995 |
用直接水喷注气相色谱法测定水中挥发性醇类含量的标准试验方法 |
Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography |
| ASTM C 719-1993 |
在循环运动条件下弹性接合密封料的粘着性和粘结力的标准试验方法(Hockman循环) |
Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle) |
| ASTM F 1599-1995 |
临时存储器件性能数据收集的标准导则 |
Standard Guide for Collecting Performance Data on Temporary Storage Devices |
| ASTM F 1583-1995 |
通信程序标准规范------语音学 |
Standard Practice for Communications Procedures-Phonetics |
| ASTM F 1025-1994 |
用于增强或修复聚乙烯煤气压力管上爆裂或破洞的全环绕型带夹紧装置的选择和使用 |
Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe |
| ASTM F 1594-1995 |
真空镀膜用纯铝(未掺杂质)原材料标准规范 |
Standard Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications |
| ASTM G 16-1995 |
用统计作腐蚀数据分析的标准指南 |
Standard Guide for Applying Statistics to Analysis of Corrosion Data |
| ASTM F 1549-1994 |
水下搜索、营救和恢复作业标准术语 |
Standard Terminology Relating to Underwater Search, Rescue, and Recovery Activities |
| ASTM F 826-1994 |
钢制船用家具顶盖 |
Standard Specification for Tops, Furniture, Marine, Steel |
| ASTM F 823-1993 |
船用木制有钢柜的办公桌 |
Standard Specification for Desk, Log, Marine, Steel, with Cabinet |
| ASTM C 625-1995 |
石墨辐射结果的报告标准实施规程 |
Standard Practice for Reporting Irradiation Results on Graphite |
| ASTM C 627-1993 |
用鲁兵逊地面检验器评价陶瓷地面砖铺盖装置标准试验方法 |
Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester |
| ASTM F 861-1994 |
商用洗碟机轨道 |
Standard Specification for Commercial Dishwashing Racks |
| ASTM F 1598-1995 |
测定化学溶剂对薄膜开关图形重叠影响的标准试验方法(逐点试验法) |
Standard Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method) |
| ASTM F 875-1994 |
办公室复印机大范围浓度和底色评定用测试方法 |
Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers |
| ASTM F 870-1994 |
客车轮胎沟槽部分的胎面印迹和尺寸测量 |
Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements |
| ASTM F 953-1994 |
商业洗碗机(带有固定架倾斜型)的化学消毒处理 |
Standard Specification for Commercial Dishwashing Machines (Stationary Rack, Dump Type) Chemical Sanitizing |
| ASTM F 948-1994 |
在恒定内流动压力下塑料管道系统和组件损坏时间的标准试验方法 |
Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow |
| ASTM B 688-1996 |
铬镍钼铁板、薄板及带材标准规范 |
Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip |
| ASTM B 499-1996 |
用磁性法测量磁性基底金属的非磁性镀层厚度的标准试验方法 |
Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals |
| ASTM C 657-1993 |
玻璃的直流体电阻系数的标准试验方法 |
Standard Test Method for D-C Volume Resistively of Glass |
| ASTM E 1865-1997 |
监测空气中气体和蒸气的开放路径傅里叶传输红外OP/FT-IR的标准指南 |
Standard Guide for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air |
| ASTM E 1866-1997 |
建立光谱仪性能试验的标准指南 |
Standard Guide for Establishing Spectrophotometer Performance Tests |
| ASTM E 1856-1997 |
用于由普通试验机器上获得数据的计算机化数据获得系统评估的标准指南 |
Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines |
| ASTM A 523-1996 |
高压管型电缆线路用平端无缝与电阻焊钢管的标准规范 |
Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits |
| ASTM A 524-1996 |
常温和低温用无缝碳素钢管的标准规范 |
Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures |
| ASTM E 1892-1997 |
核设备准备计划的标准指南 |
Standard Guide for Preparing Characterization Plans for Decommissioning Nuclear Facilities |
| ASTM F 1784-1997 |
面食炊具性能标准试验方法 |
Standard Test Method for Performance of a Pasta Cooker |
| ASTM D 1322-1997 |
煤油和航空涡轮机燃料烟点的标准试验方法 |
Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel |
| ASTM D 1208-1996 |
某些颜料通性的标准试验方法 |
Standard Test Methods for Common Properties of Certain Pigments |
| ASTM E 1478-1997 |
透明薄板材料视觉色彩评价的标准实施规范 |
Standard Practice for Visual Color Evaluation of Transparent Sheet Materials |
| ASTM E 697-1996 |
气相色谱法中电子俘获检测器使用的标准实施规程 |
Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography |
| ASTM E 654-1996 |
气雾及喷雾杀虫剂杀蟑螂效力的试验方法 |
Standard Test Method for Effectiveness of Aerosol and Pressurized Spray Insecticides Against Cockroaches |
| ASTM E 1178-1997 |
丙烯腈分析的测试法 |
Standard Test Methods for Analysis of Acrylonitrile |
| ASTM E 1135-1997 |
荧光穿透性亮度比较的试验方法 |
Standard Test Method for Comparing the Brightness of Fluorescent Penetrants |
| ASTM E 1117-1997 |
燃料酒精制造设备的设计 |
Standard Practice for Design of Fuel-Alcohol Manufacturing Facilities |
| ASTM B 772-1997 |
电接触材料(击穿和非击穿)化学成分的规定的标准规范 |
Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing) |
| ASTM D 5270-1996 |
测定有限的,非越流性,封闭含水层透射率和蓄水系数的标准试验方法 |
Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers |
| ASTM D 1494-1997 |
增强塑料板的散射光透射系数的标准测试方法 |
Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels |
| ASTM D 5876-1995 |
地下水质量监测设备安装和地质环境勘探用直接旋转钢丝绳套管先进钻探方法的使用标准指南 |
Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices |
| ASTM E 965-1996 |
用砂石体积测量法测量路面宏观结构深度的标准试验方法 |
Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique |
| ASTM D 5028-1996 |
用热分析法测试挤拉树脂固化性的标准试验方法 |
Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis |
| ASTM D 5017-1996 |
用碳-13核磁共振法测定线性低密度聚乙烯成分的标准试验方法 |
Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance |
| ASTM D 3591-1997 |
测定按配方制造的化合物中聚氯乙烯对数粘度值的标准试验方法 |
Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds |
| ASTM A 660-1996 |
高温用离心铸造碳素钢管的标准规范 |
Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
| ASTM C 1422-1999 |
化学增强平面玻璃的标准规范 |
Standard Specification for Chemically Strengthened Flat Glass |
| ASTM C 1426-1999 |
旋光计检验和校正的标准实施规范 |
Standard Practices for Verification and Calibration of Polarimeters |
| ASTM F 221-1998 |
复写纸、油墨色带制品以及所产生的图案相关的标准术语 |
Standard Terminology Relating to Carbon Paper and Inked Ribbon Products and Images Made Therefrom |
| ASTM D 6160-1998 |
气相色谱法测定废料中多氯代联苯的标准试验方法 |
Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography |
