| 标准号 |
中文名 |
英文名 |
| ASTM C 225-1985 |
玻璃容器耐化学腐蚀的试验方法 |
Test Methods for Resistance of Glass Containers to Chemical Attack |
| ASTM C 108-1946 |
热传导用符号 |
Symbols for Heat Transmission |
| ASTM C 147-1986 |
玻璃容器内部压强的标准试验方法 |
Standard Test Methods for Internal Pressure Strength of Glass Containers |
| ASTM F 1030-1986 |
阀门操作装置的选择准则 |
Standard Practice for Selection of Valve Operators |
| ASTM F 1028-1986 |
医用三脚钉 |
Tri-Fin Nails |
| ASTM E 870-1982 |
木材燃料分析的测试方法 |
Test Methods for Analysis of Wood Fuels |
| ASTM F 1027-1986 |
口腔颜面修补材料和器械同细胞组织和细胞相容性的评定 |
Assessment of Tissue and Cell Compatibility of Orofacial Prosthetic Materials and Devices |
| ASTM F 1026-1986 |
止血钳的一般工艺和性能测量 |
General Workmanship and Performance Measurements of Hemostatic Forceps |
| ASTM F 1020-1986 |
船用暗线阀 |
Standard Specification for Line-Blind Valves for Marine Applications |
| ASTM F 1070-1987 |
船用非密闭门 |
Standard Specification for Doors, Non-Tight, for Marine Use |
| ASTM F 1069-1987 |
船用水密,气密/不透气和不透风各扇单独安夹扣的门 |
Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use |
| ASTM E 130-1987 |
石墨电极形状和尺寸的名称与符号 |
Designation of Shapes and Sizes of Graphite Electrodes |
| ASTM B 389-1981 |
恒温双金属螺旋形线圈的热偏转率的标准试验方法 |
Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal |
| ASTM E 110-1982 |
用轻型硬度测试仪测定金属材料压痕硬度的试验方法 |
Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers |
| ASTM D 305-1984 |
黑色涂料中的溶剂萃取材料的试验方法 |
Test Method for Solvent-Extractable Material in Black Pigments |
| ASTM B 504-1990 |
用库仑法测量金属镀层厚度的试验方法 |
Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method |
| ASTM C 1026-1987 |
测定瓷砖耐冻熔变化的试验方法 |
Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling |
| ASTM C 1023-1987 |
久用不危害健康的卫生陶瓷装璜标签的标准实施规程 |
Standard Practice for Labeling Ceramic Art Materials for Chronic Adverse Health Hazards |
| ASTM E 828-1981 |
标明经筛析的3类回收废燃料尺寸的标准试验方法 |
Standard Test Method for Designating the Size of RDF-3 From its Sieve Analysis |
| ASTM E 885-1988 |
用原子吸收分光光度法分析回收废燃料中金属的标准试验方法 |
Standard Test Methods for Analyses of Metals in Refuse-Derived Fuel by Atomic Absorption Spectroscopy |
| ASTM E 1183-1987 |
为进一步分析用的风干回收废燃料RDF-5的标准试验方法 |
Standard Test Method for Air Drying RDF-5 for Further Analysis |
| ASTM E 1181-1987 |
描述双重粒度特性的测试方法(代替 SAM AMS 2316A) |
Standard Test Methods for Characterizing Duplex Grain Sizes |
| ASTM E 1179-1987 |
敞开式办公室元件和系统测试用声源 |
Sound Sources Used for Testing Open Office Components and Systems |
| ASTM E 1175-1987 |
用大直经积分球测定材料的太阳能或光反射性,透明性和吸收性的试验方法 |
Test Method for Determining Solar or Photopic Reflectance, Transmittance and Absorptance of Materials Using a Large Diameter Integrating Sphere |
| ASTM E 1172-1987 |
波长扩散X射线分光仪的描述和规定 |
Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer |
| ASTM F 750-1987 |
用给老鼠有系统注射评定药物材料浸渍物 |
Standard Practice for Evaluating Material Extracts by Systemic Injection in the Mouse |
| ASTM F 805-1983 |
用无触点干涉测量技术测量胶片表面平整度的试验方法 |
Test Method for Photoplate Surface Flatness by Interferometric Noncontact Technique |
| ASTM C 241-1990 |
人行道用石板耐磨性的标准试验方法 |
Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic |
| ASTM F 719-1981 |
用兔作生物材料试验对皮肤的刺激 |
Testing Biomaterials in Rabbits for Primary Skin Irritation |
| ASTM F 772-1982 |
膜式电阻器的噪声等级试验方法 |
Test Method for Noise Quality of Film-Type Resistors |
| ASTM D 1331-1989 |
表面活性剂溶液的表面张力与界面张力的标准试验方法 |
Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents |
| ASTM B 579-1973 |
锡铅合金的电解沉积镀层(焊接板) |
Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
| ASTM E 1076-1985 |
固体废料加工设备上的健康防护和安全记录 |
Standard Practice for Maintaining Health and Safety Records at Solid Waste Processing Facilities |
| ASTM E 1075-1985 |
乙二醇,二甘醇,三甘醇,丙二醇和双丙二醇气味以及丙二醇味道的标准试验方法 |
Standard Test Methods for Odor of Ethylene Glycol, Diethylene Glycol, Triethylene Glycol, Propylene Glycol, and Dipropylene Glycol and Taste of Propylene Glycol |
| ASTM E 1069-1985 |
密封应力下地热和/或高温操作用聚合密封材料试验的方法 |
Test Method for Testing Polymeric Seal Materials for Geothermal and/or High Temperature Service Under Sealing Stress |
| ASTM F 704-1981 |
管道系统法兰接头用螺栓长度选择的标准实施规程 |
Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints |
| ASTM F 1120-1987 |
管道用循环金属风箱型膨胀节 |
Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications |
| ASTM F 1106-1987 |
绞缆筒装置(绞绳筒,绞盘架) |
Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head) |
| ASTM C 371-1989 |
非塑性陶瓷粉末的金属丝筛分析的标准试验方法 |
Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders |
| ASTM C 370-1988 |
焙烧卫生陶瓷制品受潮膨胀的标准试验方法 |
Standard Test Method for Moisture Expansion of Fired Whiteware Products |
| ASTM C 368-1988 |
陶瓷餐具抗冲击性的标准试验方法 |
Standard Test Method for Impact Resistance of Ceramic Tableware |
| ASTM D 1166-1984 |
木材及有关材料中甲氧基团的标准测试方法 |
Standard Test Method for Methoxyl Groups in Wood and Related Materials |
| ASTM C 1079-1987 |
测定新搅拌混凝土中水含量的试验方法 |
Test Methods for Determining the Water Content of Freshly Mixed Concrete |
| ASTM C 1078-1987 |
测定新搅拌混凝土中水泥含量的试验方法 |
Test Methods for Determining the Cement Content of Freshly Mixed Concrete |
| ASTM C 1070-1986 |
用激光扩散法测定氧化铝和石英粒度分布的试验方法 |
Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering |
| ASTM E 775-1987 |
回收废燃料分析样品中总硫量的测试方法 |
Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel |
| ASTM F 1365-1991 |
使用挠性弹性密封材料的地下塑料水管接头耐水渗透性测试方法 |
Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals |
| ASTM E 1056-1985 |
一家和两家住房用太阳能家用热水设备的安装和维护 |
Installation and Service of Solar Domestic Water Heating Systems for One- and Two-Family Dwellings |
| ASTM D 3747-1979 |
粘合屋顶绝缘用乳化沥青粘合剂 |
Emulsified Asphalt Adhesive for Adhering Roof Insulation |
| ASTM E 1068-1985 |
用模拟地热试液浸渍法测试非金属密封材料的方法 |
Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid |
| ASTM C 199-1984 |
耐火灰浆的耐火性的试验方法 |
Test Method for Pier Test for Refractory Mortars |
| ASTM E 1167-1987 |
停止操作的辐射防护计划 |
Standard Guide for Radiation Protection Program for Decommissioning Operations |
| ASTM C 1039-1985 |
石墨电极的表观孔隙率、表观比重和松密度的试验方法 |
Test Methods for Apparent Porosity, Apparent Specific Gravity and Bulk Density of Graphite Electrodes |
| ASTM C 1037-1985 |
公用事业用地下预制混凝土的检验的标准实施规程 |
Standard Practice for Inspection of Underground Precast Concrete Utility Structures |
| ASTM D 4412-1984 |
水和水形成沉积物中硫酸盐还原菌的标准试验方法 |
Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits |
| ASTM D 4455-1985 |
按荧光显微镜计算程序进行水生菌计数的试验方法 |
Test Method for Enumeration of Aquatic Bacteria by Epifluorescence Microscopy Counting Procedure |
| ASTM D 4134-1982 |
用克拉克-邦普斯浮游生物采样器采集可繁殖海洋浮游生物 |
Sampling Phytoplankton with a Clarke-Bumpus Plankton Sampler |
| ASTM D 4133-1982 |
用泵取样可繁殖海洋浮游生物的标准实施规程 |
Standard Practice for Sampling Phytoplankton with Pumps |
| ASTM D 4132-1982 |
用圆锥拖网取样可繁殖海洋浮游生物的标准实施规程 |
Standard Practice for Sampling Phytoplankton with Conical Tow Nets |
| ASTM F 1628-1995 |
激光外科学用套箍和未套箍气管导管及有关治疗的标记和标志的标准规范 |
Standard Specification for Labeling and Marking of Cuffed and Uncuffed Tracheal Tubes and Related Treatments Intended for Use During Laser Surgery |
| ASTM C 1263-1995 |
挠性水蒸汽缓凝剂热完整性标准试验方法 |
Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders |
| ASTM D 5614-1994 |
用宽口堰测量明渠水流量的标准试验方法 |
Standard Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs |
| ASTM D 5636-1994 |
毡子或薄层屋面和防水材料低温展开的标准试验方法 |
Standard Test Method for Low Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials |
| ASTM D 5659-1995 |
使用高效液相色谱法的废水中氯苯氧基酸除莠剂的标准试验方法 |
Standard Test Method for Chlorophenoxy Acid Herbicides in Waste Using HPLC |
| ASTM D 5520-1994 |
单轴压缩法实验室测定冻结土壤样品蠕变性能的标准试验方法 |
Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression |
| ASTM D 5613-1994 |
使用染料示踪剂明渠测量行程时间标准试验方法 |
Standard Test Method for Open-Channel Measurement of Time of Travel Using Dye Tracers |
| ASTM D 5592-1994 |
使用塑料的工程设计中所要求的材料特性标准导则 |
Standard Guide for Material Properties Needed in Engineering Design Using Plastics |
| ASTM D 5612-1994 |
水质测量的质量规划和现场实施标准导则 |
Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program |
| ASTM E 811-1995 |
测量夜间条件下反射镜比色性能的标准实施规范 |
Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions |
| ASTM E 755-1994 |
用液体色谱法作过氧化二异丙苯化验的测试方法 |
Standard Test Method for Dicumyl Peroxide, Assay (Liquid Chromatography) |
| ASTM B 798-1995 |
用凝胶体电谱法测定金属基物上金或钯涂层孔隙度的标准试验方法 |
Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography |
| ASTM F 1072-1994 |
金属网门 |
Standard Specification for Expanded-Metal Doors |
| ASTM F 219-1996 |
电子器件和电灯用细圆丝和扁线的试验方法 |
Standard Test Methods of Testing Fine Round and Flat Wire for Electron Devices and Lamps |
| ASTM D 4200-1982 |
膜过滤器上油墨格栅的抑制作用的评价方法 |
Test Method for Evaluating Inhibitory Effects of Ink Grids on Membrane Filters |
| ASTM D 4199-1982 |
膜过滤器的可高压消毒性的试验方法 |
Test Methods for Autoclavability of Membrane Filters |
| ASTM D 4198-1982 |
细菌分析和生长用的和膜过滤器一起使用的吸收性垫片的评价方法 |
Test Methods for Evaluating Absorbent Pads Used with Membrane Filters for Bacteriological Analysis and Growth |
| ASTM D 4178-1982 |
湿度分析仪的标准 |
Standard Practice for Calibrating Moisture Analyzers |
| ASTM D 4149-1982 |
地表水中浮游生物取样分类 |
Classification for Sampling Phytoplankton in Surface Waters |
| ASTM D 4271-1988 |
纺织品测试取样的编写规程 |
Writing Statements on Sampling in Test Methods for Textiles |
| ASTM C 895-1987 |
从上釉瓷砖提取铅和镉的试验方法 |
Test Method for Lead and Cadmium Extracted from Glazed Ceramic Tile |
| ASTM C 885-1987 |
用音响共振法测定耐火异型材的弹性模量的标准试验方法 |
Standard Test Method for Young's Modulus of Refractory Shapes by Sonic Resonance |
| ASTM D 2325-1968 |
用多孔板仪器测量粗粒和中等结构土壤的毛细管与水份关系的标准试验方法 |
Standard Test Method for Capillary-Moisture Relationships for Coarse- and Medium-Textured Soils by Porous-Plate Apparatus |
| ASTM D 1220-1965 |
立式圆罐的测量和校正(只用做再版单行本) |
Measurement and Calibration of Upright Cylindrical Tanks (Available as Separate Reprints Only) |
| ASTM F 383-1973 |
髓内用杆的静态弯曲及扭转试验 |
Static Bend and Torsion Testing of Intramedullary Rods |
| ASTM D 1898-1968 |
塑料抽样 |
Sampling of Plastics |
| ASTM D 3707-1989 |
耐热试验法测定油包水乳液贮存稳定性的标准试验方法 |
Standard Test Method for Storage Stability of Water-in-Oil Emulsions by the Oven Test Method |
| ASTM G 96-1990 |
工厂设备中腐蚀性的在监视 |
On-Line Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) |
| ASTM G 106-1989 |
电化学阻抗测量用算法和设备的验证 |
Verification of Algorithm and Equipment for Electrochemical Impedance Measurements |
| ASTM F 1068-1990 |
船用耐气密造/不透气双层单独安夹扣的门标准规范 |
Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use |
| ASTM F 1099-1990 |
船用防鼠装置 |
Rat Guards, Ship's |
| ASTM E 1154-1989 |
活塞或柱塞操作的容量测量装置用标准规范 |
Standard Specification for Piston or Plunger Operated Volumetric Apparatus |
| ASTM F 340-1971 |
导入型医疗用埋头钻 |
Pilot-Type Medical Countersinks |
| ASTM F 470-1989 |
干静电调色剂的结块温度 |
Standard Practice for Caking Temperature of Dry Electrostatic Toner |
| ASTM D 4682-1987 |
二冲程循环汽油发动机润滑剂的流动性及与汽油的可混合性 |
Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants |
| ASTM D 4102-1982 |
碳纤维的耐热氧化性的试验方法 |
Test Method for Thermal Oxidative Resistance of Carbon Fibers |
| ASTM D 3539-1987 |
壳式薄膜蒸发计测定挥发性液体蒸发速率的试验方法 |
Test Methods for Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer |
| ASTM D 3522-1986 |
瓦楞纸板表面涂蜡及浸蜡的试验方法 |
Standard Test Method for Applied Coating Wax and Impregnating (Saturating) Wax in Corrugated Board Facing |
| ASTM D 3521-1986 |
瓦楞纸板表面涂蜡的试验方法 |
Standard Test Method for Surface Wax Coating On Corrugated Board |
| ASTM C 584-1981 |
卫生陶瓷器具和有关制品的透光光泽度的试验方法 |
Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products |
| ASTM C 560-1988 |
石墨的化学分析标准试验方法 |
Standard Test Methods for Chemical Analysis of Graphite |
| ASTM C 559-1990 |
用物理测量法测定碳加工品及石墨制品松密度的试验方法 |
Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles |
| ASTM G 61-1986 |
铁镍钴基合金的局部腐蚀敏感性的循环动电势极化强度的试验方法 |
Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys |
| ASTM E 803-1991 |
中子射线照相束长度直径比测定的标准试验方法 |
Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams |
| ASTM E 82-1991 |
测定金属晶体取向的标准试验方法 |
Standard Test Method for Determining the Orientation of a Metal Crystal |
| ASTM D 5066-1991 |
在喷涂汽车涂料的生产条件下测定转换效率的试验方法 |
Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints - Weight Basis |
| ASTM E 1248-1990 |
切碎机防爆 |
Shredder Explosion Protection |
| ASTM E 937-1993 |
结构构件上喷涂防火材料对钢腐蚀性的试验方法 |
Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
| ASTM C 749-1992 |
碳和石墨抗拉应力的标准试验方法 |
Standard Test Method for Tensile Stress-Strain of Carbon and Graphite |
| ASTM G 112-1992 |
进行铝合金的剥离腐蚀试验 |
Conducting Exfoliation Corrosion Tests in Aluminum Alloys |
| ASTM B 599-1992 |
镍铁铬钼钶稳定合金板、薄板及带材标准规范 |
Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip |
| ASTM D 3083-1989 |
水塘、水道和水库衬砌用柔性聚氯乙烯塑料薄板 |
Flexible Poly(Vinyl Chloride) Plastic Sheeting for Pond, Canal and Reservoir Lining |
| ASTM D 3880-1990 |
石棉强度单位的标准试验方法 |
Standard Test Method for Asbestos Strength Units |
| ASTM D 3854-1990 |
橡胶绳耐干热试验方法 |
Test Method for Rubber Thread - Resistance to Dry Heat |
| ASTM F 825-1993 |
测定直接示热纸的静态热敏度的方法 |
Standard Specification for Drawers, Furniture, Marine, Steel |
| ASTM F 824-1993 |
船用钢制餐桌 |
Standard Specification for Tables, Mess, Marine, Steel |
| ASTM F 765-1993 |
船用锚链及锚链轮 |
Standard Specification for Wildcats, Ship Anchor Chain |
| ASTM F 708-1992 |
硬质管道支架的设计与安装标准规程 |
Standard Practice for Design and Installation of Rigid Pipe Hangers |
| ASTM E 896-1992 |
进行含水直接光解试验的标准试验方法 |
Standard Test Method for Conducting Aqueous Direct Photolysis Tests |
| ASTM D 5210-1992 |
测定市政污秽沉积物现场的塑料材料厌氧生物降解能力的标准试验方法 |
Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge |
| ASTM D 4713-1992 |
热定形和液体状印刷油墨中不挥发物含量的标准试验方法 |
Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems |
| ASTM D 4698-1992 |
各种金属的化学分析用沉淀物样品的总煮解度的试验方法 |
Total Digestion of Sediment Samples for Chemical Analysis of Various Metals |
| ASTM F 434-1993 |
预制衬垫的漏气试验 |
Blow-Out Testing of Preformed Gaskets |
| ASTM D 5431-1993 |
公共机构和家用编织及针织薄片制品的标准性能规范 |
Standard Performance Specification for Woven and Knitted Sheeting Products for Institutional and Household Use |
| ASTM D 4151-1992 |
毯子的易燃性标准试验方法 |
Standard Test Method for Flammability of Blankets |
| ASTM F 1431-1992 |
柴油机排气阻水阀 |
Standard Specification for Water Trap for Diesel Exhaust |
| ASTM D 1814-1970 |
测量皮件厚度的标准试验方法 |
Standard Test Method for Measuring Thickness of Leather Units |
| ASTM D 1768-1989 |
用紫外线吸收法对合成洗涤剂中烷基苯磺酸钠含量的测试方法 |
Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption |
| ASTM D 4009-1992 |
人工洗碗用洗涤剂泡沫的稳定性 |
Foam Stability of Hand Dishwashing Detergents |
| ASTM D 1865-1989 |
组合屋面用矿物集料硬度的试验方法 |
Test Method for Hardness of Mineral Aggregate Used on Built- up Roofs |
| ASTM D 3565-1989 |
用机械洗碟去污剂清除餐具图案的试验方法 |
Test Method for Tableware Pattern Removal by Mechanical Dishwasher Detergents |
| ASTM F 58-1968 |
电子级溶剂比阻抗测量试验方法 |
Test Method of Measuring Specific Resistivity of Electronic Grade Solvents |
| ASTM C 1221-1992 |
γ射线光谱法无损分析均相溶液中特种核材料的标准试验方法 |
Standard Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions by Gamma-Ray Spectrometry |
| ASTM F 1730-1996 |
水上救生投掷包的投掷用标准导则 |
Standard Guide for Throwing a Water Rescue Throwbag |
| ASTM F 878-1995 |
聚丁烯热塑性薄壁滴灌管 |
Polybutylene (PB) Thermoplastic Thin-Wall Drip Irrigation Tubing |
| ASTM D 5714-1995 |
数字地球空间元数据内容的标准规范 |
Standard Specification for Content of Digital Geospatial Metadata |
| ASTM D 5783-1995 |
地质环境勘探和地下水质量检测装置安装用带水基钻流的直接旋转钻机的使用标准导则 |
Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices |
| ASTM D 5750/D 5750M-1995 |
压敏带的宽度和长度的标准导则 |
Standard Guide for Width and Length of Pressure-Sensitive Tape |
| ASTM D 5778-1995 |
土壤中的电子摩擦锥运行和压电锥穿透试验的标准试验方法 |
Standard Test Method for Performing Electronic Friction Cone and Piezocone Penetration Testing of Soils |
| ASTM D 5736-1995 |
高蓬松度非织造织物厚度的标准试验方法 |
Standard Test Method for Thickness of Highloft Nonwoven Fabrics |
| ASTM D 4631-1995 |
用压力脉冲技术现场测量低渗透性岩石的透射率和释水系数的标准试验方法 |
Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique |
| ASTM D 5761-1996 |
多相流体废料的乳化和悬浮液的标准规程 |
Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials |
| ASTM D 4874-1995 |
柱型装置中浸出固体废物的标准试验方法 |
Standard Test Method for Leaching Solid Material in a Column Apparatus |
| ASTM D 5652-1995 |
木和木基制品中螺栓连接的标准试验方法 |
Standard Test Methods for Bolted Connections in Wood and Wood-Base Products |
| ASTM B 451-1993 |
印制电路和输送带用铜箔、带和薄板 |
Copper Foil, Strip and Sheet for Printed Circuits and Carrier Tapes |
| ASTM D 2238-1992 |
含甲基团的聚乙烯对波长为1378cm-1光波吸收率的试验方法 |
Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm - 1 |
| ASTM D 2226-1993 |
橡胶配料用各种石油油品的分类 |
Classification for Various Types of Petroleum Oils for Rubber Compounding Use |
| ASTM F 571-1987 |
安全区出口装置的安装 |
Installation of Exit Devices in Security Areas |
| ASTM F 556-1988 |
无碳复写纸卷曲度的标准试验方法 |
Standard Test Method for Curl of Carbonless Copy Papers |
| ASTM F 549-1985 |
有关无碳复制用产品名词的定义 |
Standard Terminology Relating to Carbonless Copy Products |
| ASTM C 632-1988 |
搪瓷用薄钢板的再煮倾向的试验方法 |
Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling |
| ASTM A 864/A 864M-1990 |
预应力混凝土轨枕用变形钢丝 |
Steel Wire, Deformed for Prestressed Concrete Railroad Ties |
| ASTM A 576-1990 |
特级热轧碳素钢棒 |
Steel Bars, Carbon, Hot-Wrought, Special Quality |
| ASTM A 842-1985 |
高密度石墨铸铁的标准规范 |
Standard Specification for Compacted Graphite Iron Castings |
| ASTM A 835-1984 |
铁合金与附加合金的尺寸的标准规范 |
Standard Specification for Sizes of Ferroalloys and Alloy Additives |
| ASTM A 833-1984 |
用比较硬度测试仪测量金属材料的压痕硬性 |
Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers |
| ASTM C 607-1988 |
焦化大型含碳承重材料 |
Coking Large Shapes of Carbon-Bearing Materials |
| ASTM D 3902-1990 |
液化石油气气体扩散用橡胶软管的试验方法 |
Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas |
| ASTM D 991-1989 |
橡胶特性.导电橡胶及抗静电橡胶制品的体电阻系数测试方法 |
Test Method for Rubber Property - Volume Resistivity of Electrically Conductive and Antistatic Products |
| ASTM F 1208-1989 |
麻醉呼吸系统的最低性能和安全要求用标准规范 |
Standard Specification for Minimum Performance and Safety Requirements for Anesthesia Breathing Systems |
| ASTM C 346-1987 |
陶瓷材料制45度镜面光泽度的试验方法 |
Test Method for 45-Deg Specular Gloss of Ceramic Materials |
| ASTM C 336-1971 |
用纤维伸长法测定玻璃的软化点和应变点的试验方法 |
Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation |
| ASTM D 2130-1990 |
显微投影法测定羊毛和其它动物纤维直径的标准试验方法 |
Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection |
| ASTM C 1075-1993 |
铀精矿取样标准规程 |
Standard Practices for Sampling Uranium-Ore Concentrate |
| ASTM D 4131-1984 |
用鱼藤酮采集鱼样的标准规程 |
Standard Practice for Sampling Fish with Rotenone |
| ASTM D 4100-1982 |
塑性材料在燃烧时烟雾粒子重量分析测定的方法 |
Test Method for Gravimetric Determination of Smoke Particulates from Combustion of Plastic Materials |
| ASTM C 1096-1991 |
石棉水泥中木纤维含量的测定方法 |
Test Method for Determination of Wood Fiber in Asbestos Cement |
| ASTM C 1025-1991 |
石墨电极芯挠曲断裂模数的试验方法 |
Test Method for Modulus of Rupture in Bending of Electrode Graphite |
| ASTM D 1908-1989 |
缝纫针脚对机织物损伤的试验方法 |
Test Method for Needle-Related Damage Due to Sewing in Woven Fabric |
| ASTM F 924-1990 |
减震弹性地板覆盖物的耐刺穿试验方法 |
Test Method for Resistance to Puncture of Cushioned Resilient Floor Coverings |
| ASTM D 4506-1990 |
通过径向升高试验测定现场岩石物质变形模数的方法 |
Test Method for Determining the In Situ Modulus of Deformation of Rock Mass Using a Radial Jacking Test |
| ASTM F 1231-1989 |
在淡水及其它内陆环境、河流和小溪中使用浮油分散剂的生态条件 |
Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and Other Inland Environments, Rivers and Creeks |
| ASTM D 209-1981 |
灯黑颜料的标准规范 |
Standard Specification for Lampblack Pigment |
| ASTM D 154-1985 |
清漆试验 |
Testing Varnishes |
| ASTM D 1997-1991 |
用干燥物质作泥炭样品纤维含量的试验室测定的测试方法 |
Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass |
| ASTM D 480-1988 |
薄片铝粉和糊料的抽样和试验的标准试验方法 |
Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes |
| ASTM F 1255-1990 |
送进医院之前的自动去纤颤操作 |
Performance of Prehospital Automated Defibrillation |
| ASTM D 3746-1985 |
屋顶沥青抗冲击力的试验方法 |
Test Method for Impact Resistance of Bituminous Roofing Systems |
| ASTM D 4531-1986 |
泥炭和泥炭制品的体密度的试验方法 |
Test Methods for Bulk Density of Peat and Peat Products |
| ASTM D 4524-1986 |
羽衣成分的标准试验方法 |
Standard Test Method for Composition of Plumage |
| ASTM F 635-1985 |
电子元件及微电子元件封装用液态热固密封化合物材料性能试验的选择 |
Selection of Tests for Material Properties of Liquid Thermoset Encapsulating Compounds for Electronic and Microelectronic Encapsulation |
| ASTM F 622-1979 |
预制可替换的颅成形板 |
Standard Specification for Preformed Cranioplasty Plates That Can Be Altered |
| ASTM F 614-1980 |
光掩膜制作用光学透镜畸变的试验方法 |
Test Method for Distortion of Optical Lenses Used in Photomask Fabrication |
| ASTM E 1046-1985 |
一次性韦斯特格伦玻璃试管的标准规范 |
Standard Specification for Glass Westergren Tube, Disposable |
| ASTM D 4611-1986 |
岩石和土壤的比热的试验方法 |
Test Method for Specific Heat of Rock and Soil |
| ASTM F 1078-1987 |
外科镶刃与不镶刃剪术语. |
Standard Terminology for Surgical Scissors - Inserted and Non-Inserted Blades |
| ASTM F 1076-1987 |
管用扩张焊接及银黄铜套管连接件 |
Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube |
| ASTM C 948-1981 |
玻璃纤维增强混凝土薄片的干和湿体密度、吸水率和表观孔隙率的试验方法 |
Test Method for Dry and Wet Bulk Density, Water Absorption and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete |
| ASTM D 1518-1985 |
纺织材料的热传导的标准试验方法 |
Standard Test Method for Thermal Transmittance of Textile Materials |
| ASTM D 1648-1986 |
碱式硅铬酸盐颜料 |
Basic Lead Silicochromate Pigment |
| ASTM C 1011-1983 |
核燃料生产中用无电极电导仪器的选择指南或规范 |
Selection or Specification of Electrodeless Conductivity Instruments for the Nuclear Fuel Cycle |
| ASTM D 946-1982 |
路面建造用按贯入度级配的沥青膏 |
Penetration-Graded Asphalt Cement for Use in Pavement Construction |
| ASTM D 934-1980 |
用X射线衍射法作水沉积物中结晶化合物的识别方法 |
Identification of Crystalline Compounds in Water-Formed Deposits by X-Ray Diffraction |
| ASTM B 493-1983 |
锆及锆合金锻件 |
Zirconium and Zirconium Alloy Forgings |
| ASTM E 95-1968 |
控制通风速率的分隔式炉 |
Standard Specification for Cell-Type Oven with Controlled Rates of Ventilation |
| ASTM D 1844-1986 |
碱式硅铬酸铅的化学分析测试方法 |
Test Methods for Chemical Analysis of Basic Lead Silicochromate |
| ASTM D 1833-1987 |
石油蜡气味的测试方法 |
Standard Test Method for Odor of Petroleum Wax |
| ASTM D 2944-1971 |
泥炭加工材料的抽样标准操作规程 |
Standard Test Method of Sampling Processed Peat Materials |
| ASTM F 339-1971 |
苜蓿叶型中间销 |
Cloverleaf Intramedullary Pins |
| ASTM D 1085-1965 |
石油和石油产品的测量(只适用于再版单行本) |
Gaging Petroleum and Petroleum Products (Available as Seperate Reprint Only) |
| ASTM E 639-1978 |
用辐射高温计测量加热表面的总辐射温度的测试方法 |
Test Method for Measuring Total-Radiance Temperature of Heated Surfaces Using a Radiation Pyrometer |
| ASTM F 204-1976 |
密封钨丝和钨条表面裂纹的试验方法 |
Test Method for Surface Flaws in Tungsten Seal Rod and Wire |
| ASTM F 417-1978 |
电子级陶瓷的抗挠强度(挠折模量)试验方法 |
Test Method for Flexural Strength (Modulus of Rupture) of Electronic-Grade Ceramics |
| ASTM D 4640-1986 |
热固性酚醛树脂冲击固化时间的测定 |
Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins |
| ASTM C 839-1982 |
用负载梁法测定搪瓷的压缩应力标准试验方法 |
Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method |
| ASTM C 935-1980 |
预应力混凝土静力铸造杆材 |
Prestressed Concrete Poles Statically Cast |
| ASTM A 667/A 667M-1987 |
离心铸造的双金属(灰口及白口铸铁)柱体标准规范 |
Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders |
| ASTM D 1102-1984 |
木材中灰分的标准试验方法方法 |
Standard Test Method for Ash in Wood |
| ASTM A 702-1989 |
热锻钢栅栏柱和组件 |
Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought |
| ASTM F 269-1960 |
钨丝弯曲度的试验方法 |
Test Method for Sag of Tungsten Wire |
| ASTM E 550-1987 |
颗粒撒播器校准程序的编制 |
Preparing Granular Pesticide Ground Applicator Calibration Procedures |
| ASTM E 549-1987 |
野外用喷雾器校准程序的编制 |
Preparing Field Sprayer Calibration Procedures |
| ASTM C 970-1987 |
多个容器堆中专用核材料取样 |
Sampling Special Nuclear Materials in Multi-Container Lots |
| ASTM D 2861-1987 |
铜箔与介电薄膜或经处理的织物构成的挠性复合材料的试验方法 |
Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics |
| ASTM F 356-1975 |
电子和电气设备用氧化铍陶瓷 |
Beryllia Ceramics for Electronic and Electrical Applications |
| ASTM C 915-1979 |
预制钢筋混凝土框架墙构件 |
Standard Specification for Precast Reinforced Concrete Crib Wall Members |
| ASTM E 244-1980 |
用质谱法测定铀和钚燃料中原子裂变百分率的试验方法 |
Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Mass Spectrometric Method) |
| ASTM E 236-1966 |
烷氧基团微量测定用仪器 |
Apparatus for Microdetermination of Alkoxyl Groups |
| ASTM F 498-1977 |
高山滑雪板的中心弹性常数及弹性常数平衡的试验方法 |
Test Method for Center Spring Constant and Spring Constant Balance of Alpine Skis |
| ASTM E 560-1984 |
推断反应堆容器监测剂量结果的规程 |
Extrapolating Reactor Vessel Surveillance Dosimetry Results, E 706(IC) |
| ASTM C 967-1987 |
铀精矿 |
Uranium Ore Concentrate |
| ASTM E 129-1974 |
用粉末技术做热离子镍合金光谱分析的试验方法 |
Test Method for Spectrographic Analysis of Thermionic Nickel Alloys by the Powder Technique |
| ASTM E 125-1963 |
铁铸件的磁粉检验用标准参考照片 |
Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings |
| ASTM C 499-1978 |
墙壁及地面用扁平短形瓷砖表面尺寸及厚度的试验方法 |
Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile |
| ASTM C 621-1984 |
熔融玻璃耐火材料耐等温腐蚀的标准试验方法 |
Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass |
| ASTM C 614-1974 |
工业瓷器用瓷漆的耐强碱腐蚀的标准试验方法 |
Standard Test Method for Alkali Resistance of Porcelain Enamels |
| ASTM A 636-1976 |
氧化镍烧结块 |
Standard Specification for Nickel Oxide Sinter |
| ASTM F 476-1984 |
转动门组件安全性的标准试验方法 |
Standard Test Methods for Security of Swinging Door Assemblies |
| ASTM F 471-1976 |
与组合锁相关的术语 |
Terminology Relating to Combination Locks |
| ASTM F 415-1987 |
复写纸卷曲度的标准试验方法 |
Standard Test Method for Curl in Carbon Paper |
| ASTM F 994-1986 |
向船外排水船身渗透连接件的设计与安装 |
Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections |
| ASTM F 993-1986 |
阀门锁紧装置标准规范 |
Standard Specification for Valve Locking Devices |
| ASTM F 992-1986 |
阀门铭牌标准规范 |
Standard Specification for Valve Label Plates |
| ASTM E 211-1982 |
显微镜用盖玻片和载玻片 |
Cover Glasses and Glass Slides for Use in Microscopy |
| ASTM F 946-1985 |
制定安全密封控制和衡算计量程序的标准指南 |
Standard Guide for Establishing Security Seal Control and Accountability Procedures |
| ASTM D 3579-1977 |
彭罗斯型外科用橡胶引流管标准规范 |
Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type |
| ASTM F 1050-1987 |
测定打字机色带绕矩和伸张力的测试方法 |
Standard Test Method for Determining Winding Torque and Tension of Typewriter Ribbons |
| ASTM F 1042-1987 |
评定复印机超荷液体显影剂中的调色剂和分散剂 |
Standard Practice for Estimating Toner and Dispersant Usage in Copiers Utilizing Liquid Developers |
| ASTM F 1098-1987 |
公称管径为NPS 2～24的蝶阀外形尺寸标准规范 |
Standard Specification for Envelope Dimensions for Butterfly Valves - NPS 2～24 |
| ASTM F 1095-1988 |
用直接计数浅荧光显微镜进行电子级净化水系统中细菌的快速记数的试验方法 |
Test Method Rapid Enumeration of Bacteria in Electronics-Grade Purified Water Systems by Direct-Count Epifluorescence Microscopy |
| ASTM B 596-1989 |
金铜合金电接触材料标准规范 |
Standard Specification for Gold-Copper Alloy Electrical Contact Material |
| ASTM D 2792-1969 |
路标漆耐溶剂性和耐燃料性的测试方法 |
Test Method for Solvent and Fuel Resistance of Traffic Paint |
| ASTM B 467-1988 |
焊接铜镍管 |
Welded Copper-Nickel Pipe |
| ASTM B 457-1967 |
铝表面阳极镀层阻抗测定的标准试验方法 |
Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum |
| ASTM D 2757-1986 |
电气和电子设备用抗渗的块滑石陶瓷标准规范 |
Standard Specification for Impervious Steatite Ceramics for Electrical and Electronic Applications |
| ASTM D 2743-1968 |
光谱和气相色谱法测定路标漆固体漆料均匀性的标准实施规程 |
Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography |
| ASTM D 782-1982 |
在回转六角鼓中作船运集装箱试验 |
Testing Shipping Containers in Revolving Hexagonal Drum |
| ASTM D 772-1986 |
外部涂料剂落程度评价的试验方法 |
Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints |
| ASTM D 3345-1974 |
木材及其他纤维素材料防白蚁破坏的实验室评定方法 |
Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites |
| ASTM D 4433-1984 |
抗燃处理的纸和纸板 |
Flame-Resistant Treated Paper and Paperboard |
| ASTM D 1279-1982 |
金属除垢剂的抛光作用的试验方法 |
Test Method for Buffering Action of Metal Cleaners |
| ASTM D 2870-1986 |
焦油酸胶凝时间的试验方法 |
Test Method for Gel Time of Tar Acids |
| ASTM D 81-1987 |
碱性碳酸盐铅白颜料 |
Basic Carbonate White Lead Pigment |
| ASTM D 79-1986 |
氧化锌颜料 |
Zinc Oxide Pigments |
| ASTM E 663-1986 |
火焰原子吸收分析 |
Flame Atomic Absorption Analysis |
| ASTM D 1038-1983 |
薄板和胶合板相关标准术语 |
Standard Terminology Relating to Veneer and Plywood |
| ASTM F 466-1979 |
在0.2至2.0千兆赫频率范围内小功率晶体管的小信号散射参数的试验方法 |
Test Method for Small-Signal Scattering Parameters of Low-Power Transistors in the 0.2 to 2.0-GHz Frequency Range |
| ASTM F 462-1979 |
浴池防滑设施的消费者安全标准规范 |
Standard Consumer Safety Specification for Slip-Resistant Bathing Facilities |
| ASTM F 527-1980 |
调整光电阻曝光时间 |
Adjusting Photoresist Exposure Time |
| ASTM F 518-1977 |
测定在蚀刻期间光致抗蚀剂同硬表面光掩膜坯及半导体片的有效粘附性 |
Determining Effective Adhesion of Photoresist to Hard-Surface Photomask Blanks and Semiconductor Wafers During Etching |
| ASTM F 509-1986 |
销孔用一次性碳化纸的试验的标准规程 |
Standard Practice for Testing One-Time Carbonizing Tissue for Pinholes |
| ASTM F 508-1977 |
厚膜膏规格说明 |
Specifying Thick-Film Pastes |
| ASTM D 932-1985 |
水和水沉积物中嗜铁细菌含量的标准试验方法 |
Standard Test Method for Iron Bacteria in Water and Water-Formed Deposits |
| ASTM E 583-1987 |
解决核能及其它复杂问题的ASTM自愿一致标准的系统化制订 |
Systematizing the Development of (ASTM) Voluntary Consensus Standards for the Solution of Nuclear and Other Complex Problems |
| ASTM D 575-1991 |
橡胶压缩特性的标准试验方法 |
Standard Test Methods for Rubber Properties in Compression |
| ASTM D 2281-1968 |
用绞纱试验评定润湿剂的标准试验方法 |
Standard Test Method for Evaluation of Wetting Agents by the Skein Test |
| ASTM D 2352-1985 |
从可还原溶剂型涂料中分离出的白色颜料中二氧化硫的试验方法 |
Test Method for Sulfur Dioxide in White Pigment Separated from Solvent-Reducible Paints |
| ASTM E 454-1980 |
工业用多孔板及筛(方孔系列)的标准规范 |
Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series) |
| ASTM E 453-1979 |
燃料元件的包覆检验包括机械性能的测定 |
Examination of Fuel Element Cladding Including the Determination of the Mechanical Properties |
| ASTM D 3387-1983 |
用美国工程兵团回转试验机测定沥青混合料的压实应变特性及剪切应变特性的标准试验方法 |
Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM) |
| ASTM E 445/E 445M-1988 |
装有足尺寸轮胎的乘用车在铺覆路面上刹车距离的标准测试方法 |
Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires |
| ASTM D 2331-1980 |
水沉积物的制备和初步试验 |
Preparation and Preliminary Testing of Water-Formed Deposits |
| ASTM B 533-1985 |
镀金属塑料抗撕裂强度的试验方法 |
Test Method for Peel Strength of Metal Electroplated Plastics |
| ASTM D 2372-1985 |
从可还原溶剂型涂料中分离载色体的标准规程 |
Standard Practice for Separation of Vehicle From Solvent-Reducible Paints |
| ASTM D 2371-1985 |
可还原溶剂型涂料中颜料含量的测试方法 |
Test Method for Pigment Content of Solvent-Reducible Paints |
| ASTM D 962-1981 |
涂料用铝粉和铝浆颜料 |
Aluminum Powder and Paste Pigments for Paints |
| ASTM D 1109-1984 |
木材在1%的烧碱中可溶性的标准试验方法 |
Standard Test Method for 1% Sodium Hydroxide Solubility of Wood |
| ASTM D 2527-1983 |
橡胶密封件的接合强度 |
Standard Specification for Rubber Seals - Splice Strength |
| ASTM C 916-1985 |
导管隔热用粘结剂的标准规范 |
Standard Specification for Adhesives for Duct Thermal Insulation |
| ASTM D 2621-1987 |
溶剂可还原型涂料中载色剂固体的红外鉴别标准试验方法 |
Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints |
| ASTM C 949-1980 |
用颜料渗入法测定上釉卫生陶瓷孔穴率的标准试验方法 |
Standard Test Method for Porosity in Vitreous Whitewares by Dye Penetration |
| ASTM F 505-1987 |
液体静电调色剂成像特性的比较评定 |
Standard Practice for Comparative Evaluation of Imaging Properties of Liquid Electrostatic Toners |
| ASTM C 816-1985 |
用燃烧碘量滴定法测定石墨中硫含量的试验方法 |
Test Method for Sulfur in Graphite by Combustion-Iodometric Titration Method |
| ASTM E 769-1985 |
甲醇,乙醇,正丙醇和异丙醇气味的标准试验方法 |
Standard Test Methods for Odor of Methanol, Ethanol, n-Propanol, and Isopropanol |
| ASTM C 808-1975 |
炭加工的及石墨制承重材料和密封材料的磨擦及磨蚀结果的报告标准指南 |
Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials |
| ASTM E 884-1982 |
城市固体废料加工设备上空气传播微生物的取样 |
Standard Practice for Sampling Airborne Microorganisms at Municipal Solid-Waste Processing Facilities |
| ASTM E 882-1987 |
在化学分析实验室中的职责和质量控制 |
Accountability and Quality Control in the Chemical Analysis Laboratory |
| ASTM E 873-1982 |
密实粒状生物燃料的容积密度的试验方法 |
Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels |
| ASTM E 872-1982 |
粒状木质燃料分析中挥发性物质的试验方法 |
Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels |
| ASTM C 971-1982 |
加热、通风和空气调节管道用绝热体系的选择和应用 |
Selection and Application of Insulation Systems for Heating, Ventilating and Air Conditioning Duct Work |
| ASTM D 49-1983 |
铅丹的化学分析 |
Chemical Analysis of Red Lead |
| ASTM D 4535-1985 |
用膨胀计测量岩石的热膨胀的试验方法 |
Test Methods for Measurement of Thermal Expansion of Rock Using a Dilatometer |
| ASTM B 532-1985 |
电镀塑料表面外观 |
Appearance of Electroplated Plastic Surfaces |
| ASTM E 319-1985 |
单盘机械天平的评定 |
Evaluation of Single-Pan Mechanical Balances |
| ASTM E 285-1980 |
热绝缘材料的氧乙炔烧蚀试验方法 |
Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials |
| ASTM E 708-1979 |
用作制造玻璃器皿原料的废玻璃 |
Waste Glass as a Raw Material for the Manufacture of Glass Containers |
| ASTM D 3497-1979 |
沥青混合物动态模量的标准试验方法 |
Standard Test Method for Dynamic Modulus of Asphalt Mixtures |
| ASTM D 3490-1980 |
软质多孔材料-结合氨基甲酸乙酯泡沫 |
Flexible Cellular Materials - Bonded Urethane Foam |
| ASTM C 601-1985 |
玻璃管的压力试验 |
Pressure Test on Glass Pipe |
| ASTM C 600-1985 |
玻璃管的热冲击试验 |
Thermal Shock Test on Glass Pipe |
| ASTM C 674-1988 |
卫生陶瓷材料的挠曲特性的试验方法 |
Test Methods for Flexural Properties of Ceramic Whiteware Materials |
| ASTM C 810-1990 |
用X射线发射光谱法测定搪瓷用钢表面镍沉积量的标准试验方法 |
Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry |
| ASTM D 3626-1985 |
气态-液态色谱法测定焦油酸组成的试验方法 |
Test Method for Tar Acid Composition by Gas-Liquid Chromatography |
| ASTM C 773-1988 |
焙烧的白色陶瓷材料抗压(压碎)强度的试验方法 |
Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials |
| ASTM F 360-1982 |
静电办公复制品图象评定 |
Standard Practice for Image Evaluation of Electrostatic Business Copies |
| ASTM F 358-1983 |
磷化砷化镓片的最大光致发光波长及其相应成分的试验方法 |
Test Method for Wavelength of Peak Photoluminescence and the Corresponding Composition of Gallium Arsenide Phosphide Wafers |
| ASTM F 357-1978 |
厚膜导体的软钎焊性测定 |
Determining Solderability of Thick Film Conductors |
| ASTM C 662-1970 |
不透水的石墨管和插片标准规范 |
Standard Specification for Impervious Graphite Pipe and Threading |
| ASTM F 1212-1989 |
砷化镓晶片热稳定性的试验方法 |
Test Method for Thermal Stability Testing of Gallium Arsenide Wafers |
| ASTM D 153-1984 |
颜料比重测试方法 |
Standard Test Methods for Specific Gravity of Pigments |
| ASTM D 371-1989 |
表面有矿物颗粒的宽边铺顶沥青卷材(有机毡)标准规范 |
Standard Specification for Asphalt Roll Roofing (Organic Felt) Surfaced with Mineral Granules; Wide Selvage |
| ASTM D 360-1989 |
紫胶清漆标准规范 |
Standard Specification for Shellac Varnishes |
| ASTM D 466-1942 |
沥青乳胶沉积薄膜的试验方法 |
Test Methods for Films Deposited From Bituminous Emulsions |
| ASTM D 444-1988 |
锌黄颜料(铬酸锌黄)的化学分析标准试验方法 |
Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow) |
| ASTM D 561-1982 |
涂料用炭黑颜料的标准规范 |
Standard Specification for Carbon Black Pigment for Paint |
| ASTM C 1069-1986 |
用氮吸附法测定氧化铝和石英表面特性的试验方法 |
Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption |
| ASTM D 502-1989 |
肥皂和其它洗涤剂粒度的试验方法 |
Test Method for Particle Size of Soaps and Other Detergents |
| ASTM D 4769-1988 |
纺织品和较舒适经纱针织品 |
Woven and Warp Knitted Comforter Fabrics |
| ASTM F 1252-1989 |
测量透明材料光反射率的试验方法 |
Test Method for Measuring Optical Reflectivity of Transparent Materials |
| ASTM F 1251-1989 |
医疗和外科器械用聚合生物材料的相关术语 |
Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices |
| ASTM D 532-1990 |
电线及电缆用天然橡胶套管规格 |
Natural Rubber Jacket for Wire and Cable |
| ASTM D 523-1989 |
镜面光泽的试验方法 |
Test Method for Specular Gloss |
| ASTM D 515-1988 |
测定水中磷含量的试验方法 |
Test Methods for Phosphorus in Water |
| ASTM D 514-1985 |
测定水中氢氧离子含量的试验方法 |
Test Method for Hydroxide Ion in Water |
| ASTM D 3732-1982 |
紫外线固化涂料固化时间的报告 |
Reporting Cure Times of Ultraviolet-Cured Coatings |
| ASTM D 3855-1984 |
橡胶绳因洗涤液浸渍变质的试验方法 |
Test Method for Rubber Thread - Deterioration Due to Washing Solution Treatment |
| ASTM D 713-1990 |
路标漆进行路面使用的试验方法 |
Conducting Road Service Tests on Fluid Traffic Marking Materials |
| ASTM E 619-1984 |
纸包装材料中异样气味评价的标准实施规程 |
Standard Practice for Evaluating Foreign Odors in Paper Packaging |
| ASTM F 885-1984 |
公称管径为NPS 1/4～2的青铜截止阀外形尺寸标准规范 |
Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS 1/4～2 |
| ASTM F 882-1984 |
低温外科医疗器械的性能和安全 |
Performance and Safety Cryosurgical Medical Instruments |
| ASTM F 14-1980 |
标准玻璃金属胎圈密封胶的生产和试验标准实施规程 |
Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal |
| ASTM E 1262-1988 |
中国仓鼠卵巢细胞/次黄质鸟嘌呤转磷酸核糖基酶基因变异鉴定的操作 |
Performance of the Chinese Hamster Ovary Cell/Hypoxanthine Guanine Phosphoribosyl Transferase Gene Mutation Assay |
| ASTM E 1258-1988 |
风扇增压装置气流校正的试验方法 |
Standard Test Method for Airflow Calibration of Fan Pressurization Devices |
| ASTM C 485-1983 |
测量瓷砖挠曲度的试验方法 |
Test Method for Measuring Warpage of Ceramic Tile |
| ASTM E 1240-1988 |
风能转换系统性能的测试方法 |
Test Method for Performance Testing of Wind Energy Conversion Systems |
| ASTM F 79-1969 |
101型密封玻璃 |
Type 101 Sealing Glass |
| ASTM F 77-1969 |
电子器件及半导体设备用陶瓷表观密度的试验方法 |
Test Method for Apparent Density of Ceramics for Electron Device and Semiconductor Application |
| ASTM F 76-1986 |
测量单晶半导体的电阻率、霍尔系数及霍尔迁移率的试验方法 |
Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors |
| ASTM D 3448-1985 |
三氯三氟乙烷的特殊水质传导率的试验方法 |
Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane |
| ASTM D 3440-1982 |
水乳化地板擦亮剂制备规格 |
Preparing Specifications for Water-Emulsion Floor Polishes |
| ASTM D 868-1985 |
路标漆渗色程度评价的试验方法 |
Test Method for Evaluating Degree of Bleeding of Traffic Paint |
| ASTM A 561-1971 |
工具钢棒的宏观刻蚀试验的标准推荐规程 |
Standard Practice for Macrotech Testing of Tool Steel Bars |
| ASTM A 536-1984 |
球墨铸铁件的标准规范 |
Standard Specification for Ductile Iron Castings |
| ASTM A 535-1985 |
特级滚珠轴承钢和滚柱轴承钢 |
Special-Quality Ball and Roller Bearing Steel |
| ASTM D 969-1985 |
路标漆渗色程度的实验室试验方法 |
Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint |
| ASTM A 197M-1987 |
化铁炉用可锻铸铁(米制) |
Cupola Malleable Iron (Metric) |
| ASTM B 699-1986 |
钢铁表面镉真空沉积镀层标准规范 |
Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel |
| ASTM B 678-1986 |
金属涂覆产品的软钎焊性试验方法 |
Standard Test Method for Solderability of Metallic-Coated Products |
| ASTM F 484-1983 |
丙烯塑料在与液态或半液态化合物接触中产生的应力裂纹的试验方法 |
Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds |
| ASTM D 1845-1986 |
铬酸锶颜料的化学分析测试方法 |
Test Methods for Chemical Analysis of Strontium Chromate Pigment |
| ASTM D 716-1986 |
云母颜料的标准试验方法 |
Standard Test Methods for Evaluating Mica Pigment |
| ASTM D 715-1986 |
硫酸钡颜料的标准试验方法 |
Standard Test Methods for Analysis of Barium Sulfate Pigment |
| ASTM F 487-1988 |
纯铝-半导体引线连接用1%硅细丝 |
Standard Specification for Fine Aluminum-1% Silicon Wire for Semiconductor Lead-Bonding |
| ASTM D 3573-1986 |
家用水槽喷洒软管 |
Consumer Product Sink Spray Hose |
| ASTM D 3572-1986 |
家用洗衣机和洗碗机用排水软管 |
Consumer Product Household Laundry and Dishwasher Drain Hose |
| ASTM F 418-1977 |
测量霍尔效应用恒定成分范围的外延磷化砷化镓试样的制备 |
Preparation of Samples of the Constant Composition Region of Epitaxial Gallium Arsenide Phosphide for Hall Effect Measurements |
| ASTM D 717-1986 |
硅酸镁颜料的标准试验方法 |
Standard Test Methods for Analysis of Magnesium Silicate Pigment |
| ASTM E 147-1961 |
用基耶达法进行氮气微量测定用仪器 |
Apparatus for Microdetermination of Nitrogen by Kjeldahl Method |
| ASTM D 933-1984 |
水沉积物的检验和分析结果的报告方法 |
Reporting Results of Examination and Analysis of Water-Formed Deposits |
| ASTM B 320-1960 |
电镀用铁铸件的制备 |
Preparation of Iron Castings for Electroplating |
| ASTM B 281-1988 |
电镀层和转化镀层用铜和铜基合金的制备 |
Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings |
| ASTM D 3068-1980 |
气溶胶容器安全填装 |
Safe Fill of Aerosol Containers |
| ASTM D 3067-1972 |
检查气溶胶容器时报告实验室结果 |
Reporting Laboratory Results When Checking Aerosol Containers |
| ASTM D 3052-1987 |
额定水乳化地板抛光剂 |
Rating Water-Emulsion Floor Polishes |
| ASTM D 3137-1981 |
橡胶性能的标准试验方法.水解稳定性 |
Standard Test Method for Rubber Property - Hydrolytic Stability |
| ASTM D 3135-1987 |
粘合的、熔凝纤维的及叠层衣料的性能 |
Performance of Bonded, Fused and Laminated Apparel Fabrics |
| ASTM D 3091-1972 |
低压压缩制品的安全罐装 |
Safe Filling of Low-Pressure Pressurized Products |
| ASTM D 3090-1972 |
气溶胶制品存储检验的标准操作规程 |
Standard Practice for Storage Testing of Aerosol Products |
| ASTM E 35-1988 |
镁和镁合金的化学分析试验方法 |
Standard Test Methods for Chemical Analysis of Magnesium and Magnesium Alloys |
| ASTM D 2008-1991 |
石油产品紫外线吸收率和吸收系数的标准试验方法 |
Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products |
| ASTM A 324-1973 |
钛铁合金 |
Standard Specification for Ferrotitanium |
| ASTM A 610-1979 |
尺寸测量用铁合金的取样和试验的标准试验方法 |
Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size |
| ASTM E 32-1986 |
测定化学成分用铁合金及钢添加剂的取样 |
Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition |
| ASTM D 1387-1989 |
合成和天然蜡皂化值(经验)的测试方法 |
Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes |
| ASTM B 489-1985 |
金属表面电解沉积和自动催化沉积金属镀层延展性的弯曲试验 |
Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals |
| ASTM B 482-1985 |
电镀用钨和钨合金的制备 |
Preparation of Tungsten and Tungsten Alloys for Electroplating |
| ASTM B 481-1968 |
电镀用钛和钛合金的制备 |
Preparation of Titanium and Titanium Alloys for Electroplating |
| ASTM B 480-1988 |
电镀用镁和镁合金制备的标准指南 |
Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating |
| ASTM B 478-1985 |
恒温双金属横向弯曲率的测试方法 |
Test Method for Cross Curvature of Thermostat Metals |
| ASTM E 871-1982 |
粒状木燃料湿度分析的标准试验方法 |
Standard Test Method for Moisture Analysis of Particulate Wood Fuels |
| ASTM D 4404-1984 |
用水银注入岩孔率计测定土壤和岩石孔隙容积与孔隙容积分布的标准试验方法 |
Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry |
| ASTM D 283-1984 |
一氧化铜和铜涂料化学分析试验方法 |
Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments |
| ASTM D 4293-1983 |
涡轮机润滑用磷酸酯基液体的标准规范 |
Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication |
| ASTM D 4-1986 |
沥青含量试验方法 |
Standard Test Method for Bitumen Content |
| ASTM D 3256-1986 |
酞菁蓝和酞菁绿颜料的化学分析的标准试验方法 |
Standard Test Methods for Chemical Analysis of Phthalocyanine Blue and Green Pigments |
| ASTM D 4380-1984 |
膨润土泥浆的密度的标准试验方法 |
Standard Test Method for Density of Bentonitic Slurries |
| ASTM D 4071-1984 |
硅酸盐水泥混凝土桥面防水膜的使用规程 |
Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems |
| ASTM D 4148-1982 |
用Sedgwick-木筏法分析地表水中可繁殖浮游生物的标准试验方法 |
Standard Test Method for Analysis of Phytoplankton in Surface Water by the Sedgwick-Rafter Method |
| ASTM D 4145-1983 |
预涂板涂层柔韧性试验方法 |
Test Method for Coating Flexibility of Prepainted Sheet |
| ASTM C 1041-1985 |
使用热通量转换器现场测定工业绝热材料的热通量 |
In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers |
| ASTM D 4074-1991 |
屋面样品中沥青集料混合料的沥青及集料含量的试验方法 |
Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures from Roofing Samples |
| ASTM D 3999-1991 |
用循环三轴器测定土壤的阻尼特性和模数的标准试验方法 |
Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus |
| ASTM B 588-1988 |
用双束干涉显微技术测量透明涂层或不透明涂层厚度的试验方法 |
Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam-Interference Microscope Technique |
| ASTM B 578-1987 |
电镀层显微硬度的标准试验方法 |
Standard Test Method for Microhardness of Electroplated Coatings |
| ASTM D 4136-1982 |
用水样瓶采集可繁殖海洋浮游生物 |
Sampling Phytoplankton with Water-Sampling Bottles |
| ASTM F 1348/F 1348M-1991 |
气动旋转式去氧化皮机械 |
Pneumatic Rotary Descaling Machines |
| ASTM D 1199-1986 |
碳酸钙颜料的标准规范 |
Standard Specification for Calcium Carbonate Pigments |
| ASTM C 99-1987 |
规格石料断裂模数的试验方法 |
Test Method for Modulus of Rupture of Dimension Stone |
| ASTM C 323-1956 |
卫生陶瓷粘土的化学分析的试验方法 |
Test Methods for Chemical Analysis of Ceramic Whiteware Clays |
| ASTM E 1294-1989 |
用自动液体孔率计检验薄膜过滤器的孔径特性的测试方法 |
Test Method for Pore Size Characteristics of Membrane Filters Using Automated Liquid Porosimeter |
| ASTM E 1344-1990 |
燃料乙醇生产设备的评定 |
Standard Guide for Evaluation of Fuel Ethanol Manufacturing Facilities |
| ASTM E 1343-1990 |
平板超滤膜的分子量界限评定的测试方法 |
Test Method for Molecular Weight Cutoff Evaluation of Flat Sheet Ultrafiltration Membranes |
| ASTM E 238-1984 |
金属材料的针型承载试验方法 |
Standard Test Method for Pin-Type Bearing Test of Metallic Materials |
| ASTM C 1215-1992 |
核工业用试验方法标准中精密度与及偏倚报告的编写和表达 |
Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry |
| ASTM E 175-1982 |
显微镜学的标准术语 |
Standard Terminology of Microscopy |
| ASTM D 3673-1989 |
α烯磺酸盐化学分析的试验方法 |
Test Methods for Chemical Analysis of Alpha Olefin Sulfonates |
| ASTM E 55-1991 |
测定化学成分用锻制有色金属及其合金铸件的取样 |
Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition |
| ASTM E 1147-1992 |
用液体色谱法估算分配系数(N-辛醇/水)的试验方法 |
Test Method for Partition Coefficient (N-Octanol/Water) Estimation by Liquid Chromatography |
| ASTM E 1027-1992 |
聚合材料电离辐射的辐照量 |
Exposure of Polymeric Materials to Ionizing Radiation |
| ASTM C 1182-1991 |
用离心测光沉淀法测定矾土的粒径分布用标准试验方法 |
Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation |
| ASTM D 1839-1991 |
柴油燃料中硝酸戊脂的标准试验方法 |
Standard Test Method for Amyl Nitrate in Diesel Fuels |
| ASTM E 300-1992 |
工业化学品的抽样法 |
Standard Practice for Sampling Industrial Chemicals |
| ASTM D 5301-1992 |
涂料刷的物理特性的标准操作规程 |
Standard Practice for Physical Characterization of Paint Brushes |
| ASTM D 3429-1993 |
低沸点液体中固定气体溶解度的试验方法 |
Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids |
| ASTM D 2641-1989 |
纤维素中氯的测试方法 |
Test Method for Chlorine in Cellulose |
| ASTM F 1398-1993 |
按气体分配系统成分测定总烃的测试方法 |
Standard Test Method for Determination of Total Hydrocarbon Contribution by Gas Distribution System Components |
| ASTM A 763-1993 |
铁素体不锈钢晶间腐蚀敏感性检测的标准操作规程 |
Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels |
| ASTM F 1321-1992 |
测定船舶重心和空载排水量的稳定试验(空船重量调查和倾斜实验)的标准指南 |
Standard Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine the Light Ship Displacement and Centers of Gravity of a Vessel |
| ASTM F 1080-1993 |
用稠度计测定粘液稠度的试验方法 |
Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer |
| ASTM D 662-1993 |
外用漆侵蚀程度评价的标准试验方法 |
Standard Test Method for Evaluating Degree of Erosion of Exterior Paints |
| ASTM D 661-1993 |
外用漆破裂程度评价的标准试验方法 |
Standard Test Method for Evaluating Degree of Cracking of Exterior Paints |
| ASTM F 1453-1992 |
提供急救医疗护理的急救人员的评定和培训 |
Training and Evaluation of First Responders Who Provide Emergency Medical Care |
| ASTM C 659-1990 |
石棉水泥有机泡沫夹心绝热板标准规范 |
Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels |
| ASTM G 41-1990 |
测定金属在热盐环境下应力断裂敏感性 |
Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment |
| ASTM D 1995-1992 |
胶粘剂(压敏胶粘剂)多重强度试验的标准试验方法 |
Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives) |
| ASTM F 1370-1992 |
船上给水系统用减压阀 |
Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard |
| ASTM D 1559-1989 |
用马歇尔(Marshall)装置测定沥青混合物抗塑性流动的试验方法 |
Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus |
| ASTM D 249-1989 |
表面有矿物颗粒的沥青屋面卷材(有机毡)规格 |
Asphalt Roll Roofing (Organic Felt) Surfaced with Mineral Granules |
| ASTM D 224-1989 |
光滑面沥青屋面卷材(有机毡)标准规范 |
Standard Specification for Smooth-Surfaced Asphalt Roll Roofing (Organic Felt) |
| ASTM D 211-1967 |
铬黄和铬橙颜料的标准规范 |
Standard Specification for Chrome Yellow and Chrome Orange Pigments |
| ASTM E 959-1983 |
表征废料粉碎设备性能特性的试验方法 |
Test Method for Characterizing the Performance of Refuse Size-Reduction Equipment |
| ASTM D 1135-1986 |
蓝色颜料的化学分析标准试验方法 |
Standard Test Methods for Chemical Analysis of Blue Pigments |
| ASTM D 1110-1984 |
木材水溶解性的标准试验方法 |
Standard Test Methods for Water Solubility of Wood |
| ASTM D 1234-1985 |
含脂羊毛的手扯长度的取样和试验方法 |
Test Method of Sampling and Testing Staple Length of Grease Wool |
| ASTM D 3871-1984 |
用筒底间隙取样技术对水中可提纯有机化合物的试验方法 |
Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling |
| ASTM D 3973-1985 |
水中卤代烃低分子量的试验方法 |
Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water |
| ASTM E 476-1987 |
封闭的冷凝系统中热不稳定性的试验方法 |
Standard Test Method for Thermal Instability of Confined Condensed Phase Systems (Confinement Test) |
| ASTM B 611-1985 |
硬质合金的耐磨性的试验方法 |
Test Method for Abrasive Wear Resistance of Cemented Carbides |
| ASTM D 3542-1992 |
桥用预制聚氯丁(橡胶)弹性接头封缝件 |
Preformed Polychloroprene Elastomeric Joint Seals for Bridges |
| ASTM D 3523-1992 |
液体和固体的自然热值标准试验方法(差示麦克法) |
Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test) |
| ASTM D 4249-1983 |
水中白色念球菌计数的试验方法 |
Standard Test Method for Enumeration of Candida albicans in Water |
| ASTM D 2503-1992 |
蒸气压力热电测量法测定烃类相对分子质量(分子量)的标准试验方法 |
Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure |
| ASTM D 3630-1989 |
测定保护涂层中有害成分的方法 |
Determining Constituents Classified as Hazardous Contained in Protective Coatings |
| ASTM F 1174-1991 |
个人计算机打印机的检测仪的使用 |
Using a Personal Computer Printer as a Test Instrument |
| ASTM D 5403-1993 |
辐射固化材料中挥发物含量的测试方法 |
Test Methods for Volatile Content of Radiation Curable Materials |
| ASTM D 3474-1990 |
包装用扭矩计校正和使用的标准实施规程 |
Standard Practice for Calibration and Use of Torque Meters Used in Packaging Applications |
| ASTM D 3473-1988 |
启动某些防止儿童开启的快速闭合盖所需升力的试验方法 |
Test Methods for Lifting Force Required to Remove Certain Child-Resistant Snap Caps |
| ASTM D 2426-1993 |
气相色谱法测定丁二烯浓缩物中丁二烯二聚物和苯乙烯的标准试验方法 |
Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography |
| ASTM D 1249-1992 |
辛基正酞酸酯增塑剂标准规范 |
Standard Specification for Octyl Ortho-Phthalate Ester Plasticizers |
| ASTM D 2268-1993 |
用毛细管气相色谱法分析高纯度n-庚烷和异辛烷的标准试验方法 |
Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography |
| ASTM D 2593-1993 |
气相色谱法测定丁二烯纯度和烃杂质的标准试验方法 |
Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography |
| ASTM A 805-1993 |
冷轧碳素钢扁平线的标准规范 |
Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled |
| ASTM D 1217-1993 |
用宾汉比重法测定液体密度和相对密度(比重)的试验方法 |
Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer |
| ASTM D 660-1993 |
外用漆龟裂程度评价的标准试验方法 |
Standard Test Method for Evaluating Degree of Checking of Exterior Paints |
| ASTM F 862-1993 |
航空航天液压流体的氯离子浓度及pH值的试验方法 |
Test Method for pH and Chloride-Ion Concentration of Aerospace Hydraulic Fluids |
| ASTM F 818-1993 |
与漏洒油治理用阻挡层相关的术语 |
Terminology Relating to Spill Response Barriers |
| ASTM F 700-1993 |
颅内动脉卡箍及仪器的保养及管理 |
Care and Handling of Intracranial Aneurysm Clips and Instruments |
| ASTM F 387-1993 |
带有泡沫层的弹性地板覆盖物厚度测量的方法 |
Test Method for Measuring Thickness of Resilient Floor Covering with Foam Layer |
| ASTM D 5011-1992 |
使用传送标准对臭氧检测器的校验 |
Standard Practices for Calibration of Ozone Monitors Using Transfer Standards |
| ASTM D 880-1992 |
船用集装箱的冲击试验的试验方法 |
Test Method for Impact Testing for Shipping Containers and Systems |
| ASTM E 1429-1991 |
洒药机及类似设施喷洒农药时对人体暴露部分健康的潜在危害评定的标准指南 |
Standard Guide for Assessing the Health Hazard of Pesticides to Applicators and Others with Potential Exposure |
| ASTM E 1420-1991 |
离子辐射环境中设备用聚合材料的规定 |
Specifying Polymeric Materials for Service in Ionizing Radiation Environments |
| ASTM D 2525-1990 |
测定羊毛水分的取样的标准操作规程 |
Standard Practice for Sampling Wool for Moisture |
| ASTM F 330-1989 |
航空航天透明外壳撞鸟试验的试验方法 |
Test Method for Bird Impact Testing of Aerospace Transparent Enclosures |
| ASTM C 1124-1990 |
石棉煤油保存的试验方法 |
Test Method for Kerosene Retention of Asbestos |
| ASTM C 1122-1990 |
石棉的湿体积的试验方法 |
Test Method for Wet Volume of Asbestos |
| ASTM D 2884-1993 |
锥入度法测定多相推进剂屈服应力的标准试验方法 |
Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method |
| ASTM D 2794-1993 |
有机涂层抗快速形变(冲击)作用的标准试验方法 |
Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) |
| ASTM B 387-1990 |
钼及钼合金棒、条和线材 |
Molybdenum and Molybdenum Alloy Bar, Rod and Wire |
| ASTM E 1436-1991 |
碳化硅晶须增强的氮化硅致密制品的搬运 |
Handling Densified Articles of Silicon Nitride Reinforced with Silicon Carbide Whiskers |
| ASTM D 1827-1992 |
用二氧化碳置换法测定绝缘液体中气含量(非酸性物)的标准试验方法 |
Standard Test Method for Gas Content (Nonacidic) of Insulating Liquids by Displacement with Carbon Dioxide |
| ASTM F 1605-1995 |
双面烤炉性能的标准试验方法 |
Standard Test Method for Performance of Double-Sided Griddles |
| ASTM E 1303-1995 |
液相色谱法用折射指数检测器规程 |
Practice for Refractive Index Detectors Used in Liquid Chromatography |
| ASTM D 4616-1995 |
沥青中间相的测定和用反射光进行显微分析的标准试验方法 |
Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch |
| ASTM D 4489-1995 |
漂浮油抽样的标准实施规程 |
Standard Practices for Sampling of Waterborne Oils |
| ASTM C 1189-1995 |
行人区自动SNM控制器的校正程序标准指南 |
Standard Guide to Procedures for Calibrating Automatic Pedestrian SNM Monitors1 |
| ASTM D 2443-1995 |
电气设备中用作挽具的绑束绳和带的试验方法 |
Test Methods for Lacing Twines and Tapes Used as Harnesses in Electrical Equipment |
| ASTM D 4270-1995 |
制定和编写试验方法用现行规则的标准指南 |
Standard Guide for Using Existing Practices in Developing and Writing Test Methods |
| ASTM E 1725-1995 |
电气系统元件耐火阻挡层系统耐火试验的标准试验方法 |
Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components |
| ASTM E 1724-1995 |
金属及金属相关参考物质认证试验标准指南 |
Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials |
| ASTM D 3758-1995 |
试验地板上喷洒抛光制品评定的标准实施规程 |
Standard Practice for Evaluation of Spray-Buff Products on Test Floors |
| ASTM D 5719-1995 |
用地下水流动模型代码模拟地下空气流动标准导则 |
Standard Guide for Simulation of Subsurface Airflow Using Ground-Water Flow Modeling Codes |
| ASTM D 5733-1995 |
非织造织物抗撕裂强度的梯形法标准试验方法 |
Standard Test Method for Tearing Strength of Nonwoven Fabrics by the Trapezoid Procedure |
| ASTM D 5297-1995 |
用高性能液相色谱法对亚磺酰胺加速剂纯度的标准试验方法 |
Standard Test Methods for Rubber Chemical Accelerator-Purity by High Performance Liquid Chromatography |
| ASTM D 5640-1995 |
用于明渠水流量测量的溢流堰和斜槽的选择的标准导则 |
Standard Guide for Selection of Weirs and Flumes for Open-Channel Flow Measurement of Water |
| ASTM D 5622-1995 |
用还原热解测定汽油和甲醇燃料中总氧含量的标准试验方法 |
Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis |
| ASTM F 394-1978 |
陶瓷基底的双轴抗挠强度(挠折模量)的试验方法 |
Test Method for Biaxial Flexure Strength (Modulus of Rupture) of Ceramic Substrates |
| ASTM D 4337-1989 |
直链洗涤剂烷基化物的分析试验方法 |
Test Methods for Analysis of Linear Detergent Alkylates |
| ASTM C 651-1991 |
在室温下用四点负荷法测定炭加工品及石墨制品挠曲强度的标准试验方法 |
Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature |
| ASTM E 929-1983 |
测量加工设备电能需求的试验方法 |
Standard Test Method for Measuring Electrical Energy Requirements of Processing Equipment |
| ASTM E 949-1988 |
回收废燃料实验室样品总湿度的标准试验方法 |
Standard Test Method for Total Moisture in a Refuse-Derived Fuel Laboratory Sample |
| ASTM E 947-1983 |
化学分析用单相地热液体取样或蒸汽取样 |
Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis |
| ASTM D 2860-1990 |
90度角和固定应力条件下压合带与纤维板的粘着性的试验方法 |
Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90 Degree Angle and Constant Stress |
| ASTM E 916-1986 |
报告雇员的健康史情况和关键项目的体格检查结果 |
Reporting Employee Health History Information and Core Physical Examination Results |
| ASTM E 987-1988 |
门窗产品玻璃卸去力的试验方法 |
Standard Test Methods for Deglazing Force of Fenestration Products |
| ASTM D 3423-1984 |
乳化的煤焦油沥青(矿物胶质型)的应用 |
Application of Emulsified Coal-Tar Pitch (Mineral Colloid Type) |
| ASTM F 1006-1986 |
船用管道装置用液滴分离器 |
Entrainment Separators for Use in Marine Piping Applications |
| ASTM D 5423-1993 |
电绝缘评定用实验室强制对流炉标准规范 |
Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
| ASTM D 5406-1993 |
橡胶的标准实施规程.生产者加工性能指数计算 |
Standard Practice for Rubber-Calculation of Producer's Process Performance Indexes |
| ASTM D 3404-1991 |
拉力计测定渗流区矩阵势能的标准指南 |
Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers |
| ASTM D 3087-1991 |
清除强酸用阴离子交换材料使用性能的标准试验方法 |
Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal |
| ASTM D 3861-1991 |
膜滤器中水萃取物质数量的试验方法 |
Test Method for Quantity of Water-Extractable Matter in Membrane Filters |
| ASTM D 3267-1991 |
大气中粒子及水溶性气态氟化物分离及收集的标准试验方法(滤器法及冲击滤尘器法) |
Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method) |
| ASTM D 2908-1991 |
用水喷射气体色层分离法测量水中的挥发性有机物质 |
Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography |
| ASTM F 1215-1989 |
用橡胶球测定平板过滤器介质在气流中初始效能的试验方法 |
Test Method for Determining the Initial Efficiency of a Flatsheet Filter Medium in an Airflow Using Latex Spheres |
| ASTM F 1214-1989 |
用卡尔费瑟尔试剂测定液体石油产品溶水性的试验方法 |
Test Method for Water Solubility in Liquid Petroleum Products by Karl Fischer Reagent |
| ASTM F 1213-1989 |
用光学显微镜测定液体过滤器粒子不纯净性和介质传导状况的试验方法 |
Test Method for Determining the Particle Contamination and Media Migration Characteristics of Liquid Filters by Optical Microscopy |
| ASTM E 12-1970 |
固体、液体及气体密度和比重的有关术语 |
Terminology Relating to Density and Specific Gravity of Solids, Liquids and Gases |
| ASTM D 4852-1988 |
悬挂的装饰织物的评定 |
Evaluation of Attached Upholstery Fabrics |
| ASTM B 390-1992 |
钨硬质合金表观晶粒尺寸及其分布的评定 |
Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides |
| ASTM D 3236-1988 |
热熔粘合剂及涂层材料表观粘度的标准试验方法 |
Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials |
| ASTM D 3268-1991 |
大气中粒状物和气态氟化物分离及收集的标准试验方法(碳酸氢钠涂料玻璃管与粒状物过滤器法) |
Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method) |
| ASTM D 4046-1991 |
分光光度法测定柴油燃料中硝酸烷基酯的标准试验方法 |
Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry |
| ASTM D 5176-1991 |
用热解和化学发光检测法测定水中化学键合氮总量的标准试验方法 |
Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection |
| ASTM D 3796-1990 |
S型皮托管(空速管)校正的标准实施规程 |
Standard Practice for Calibration of Type S Pitot Tubes |
| ASTM D 3020-1989 |
池塘、水渠和水库衬砌用聚乙烯和乙烯共聚物塑料薄板 |
Polyethylene and Ethylene Copolymer Plastic Sheeting for Pond, Canal and Reservoir Lining |
| ASTM D 2399-1983 |
稀释沥青的选择方法 |
Standard Practice for Selection of Cutback Asphalts |
| ASTM D 2384-1983 |
丁烷丁烯混合物中挥发性氯化物的痕量测试方法 |
Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures |
| ASTM C 288-1987 |
在一个大气压的一氧化碳中耐火材料裂变的试验方法 |
Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide |
| ASTM C 149-1986 |
玻璃容器热冲击的试验方法 |
Test Method for Thermal Shock Resistance of Glass Containers |
| ASTM B 555-1986 |
用点滴试验法测量电解沉积金属镀层厚度的标准指南 |
Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test |
| ASTM D 2620-1987 |
透明覆层光稳定性试验方法 |
Test Method for Light Stability of Clear Coatings |
| ASTM C 783-1985 |
石墨电极芯取样 |
Core Sampling of Graphite Electrodes |
| ASTM C 774-1988 |
搪瓷钢制品受应变和焙烧后的屈服强度的试验方法 |
Test Method for Yield Strength of Enameling Steels After Straining and Firing |
| ASTM C 664-1987 |
扩散层厚度的的标准试验方法 |
Standard Test Methods for Thickness of Diffusion Coating |
| ASTM E 918-1983 |
温度和压力升高时化学药品易燃极限的测定 |
Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure |
| ASTM D 681-1987 |
电气与包装用黄麻粗纱和合股线的规格 |
Jute Rove and Plied Yarn for Electrical and Packing Purposes |
| ASTM E 956-1983 |
城市混杂的有色金属的分类(mnm) |
Classification for Municipal-Mixed Nonferrous Metals (MNM) |
| ASTM E 955-1988 |
回收废燃料中大样品温度特性的测试方法 |
Test Method for Thermal Characteristics of Refuse-Derived Fuel Macrosamples |
| ASTM E 953-1988 |
回收废燃料灰烬可熔性的测试方法 |
Test Method for Fusibility of Refuse-Derived Fuel (RDF) Ash |
| ASTM E 743-1980 |
光谱化学实验室质量保证 |
Spectrochemical Laboratory Quality Assurance |
| ASTM B 487-1985 |
用横断面显微观察法测定金属及氧化层厚度的标准试验方法 |
Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section |
| ASTM F 1057-1987 |
用热回复技术评定挤压聚乙烯管的质量 |
Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique |
| ASTM F 1054-1987 |
尺寸为15mm和22mm的锥形配件 |
Conical Fittings of 15 mm and 22 mm Sizes |
| ASTM B 659-1990 |
金属和无机物镀层厚度的测量方法 |
Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings |
| ASTM B 651-1983 |
用双束干涉显微镜测量镍+铬或铜+镍+铬电镀表面腐蚀部位的试验方法 |
Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope |
| ASTM B 630-1988 |
电镀用铬的制备 |
Preparation of Chromium for Electroplating with Chromium |
| ASTM C 539-1984 |
用干扰法测定搪瓷、釉瓷和白色陶瓷材料线性热膨胀的试验方法 |
Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method |
| ASTM C 538-1983 |
红色、橙色和黄色陶瓷色牢度的试验方法 |
Test Method for Color Retention of Red, Orange and Yellow Porcelain Enamels |
| ASTM C 537-1987 |
用高压法测试钢制反应设备玻璃涂层可靠性的标准试验方法 |
Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage |
| ASTM C 1034-1985 |
从上釉陶瓷烹调器上提取铅和镉的试验方法 |
Test Method for Lead and Cadmium Extracted from Glazed Ceramic Cookwear |
| ASTM F 1059-1987 |
计算正性光致抗蚀剂的对比度和阈限灵敏度 |
Calculating the Contrast and Threshold Sensitivity of a Positive Photoresist |
| ASTM E 1109-1986 |
测量固体废料碎片体密度的标准试验方法 |
Standard Test Method for Determining the Bulk Density of Solid Waste Fractions |
| ASTM E 1108-1986 |
测量原料分选设备中产品回收的试验方法 |
Test Method for Determination of the Recovery of a Product in a Materials Seperation Device |
| ASTM E 1107-1986 |
测量资源回收单位操作物料通过量 |
Measuring the Throughput of Resource-Recovery Unit Operations |
| ASTM E 1160-1987 |
太阳能家用热水系统的现场检查和操作验证 |
On-Site Inspection and Verification of Operation of Solar Domestic Hot Water Systems |
| ASTM C 224-1978 |
玻璃容器的取样方法 |
Standard Practice for Sampling Glass Containers |
| ASTM E 363-1983 |
铬和铬铁合金化学分析的标准试验方法 |
Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium |
| ASTM D 4503-1986 |
用偏硼酸锂熔化法溶解固体废弃物的标准实施规范 |
Standard Practice for Dissolution of Solid Waste by Lithium Metaborate Fusion |
| ASTM B 537-1970 |
大气暴露下电镀面板定额的标准实施规程 |
Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure |
| ASTM D 4544-1986 |
泥炭沉积厚度的评估 |
Estimating Peat Deposit Thickness |
| ASTM D 4454-1985 |
用显微镜进行水生系统中细菌总量和(呼吸时)呼出的细菌的同步计数试验方法 |
Standard Test Method for Simultaneous Enumeration of Total and Respiring Bacteria in Aquatic Systems by Microscopy |
| ASTM D 4450-1985 |
羟基亚磷酸锌颜料的分析试验方法 |
Test Method for Analysis of Zinc Hydroxy Phosphite Pigment |
| ASTM D 197-1987 |
粉煤的取样方法与细度的标准试验方法 |
Standard Test Method for Sampling and Fineness Test of Pulverized Coal |
| ASTM E 323-1980 |
试验用板孔筛 |
Perforated-Plate Sieves for Testing Purposes |
| ASTM A 531/A 531M-1991 |
涡轮发电机钢定位环的超声波检验 |
Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings |
| ASTM E 406-1981 |
光谱化学分析中受控大气的应用标准实施规程 |
Standard Practice for Using Controlled Atmospheres in Spectrochemical Analysis |
| ASTM E 356-1978 |
光谱仪的介绍和说明 |
Describing and Specifying the Spectrograph |
| ASTM D 2070-1991 |
液压油热稳定性的标准试验方法 |
Standard Test Method for Thermal Stability of Hydraulic Oils |
| ASTM D 1607-1991 |
大气中二氧化氮含量的测试方法(格里斯-沙耳茨曼反应) |
Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction) |
| ASTM C 1201-1991 |
用均匀静态空气压差法测定规格石料的房屋骨袈外墙体系结构性能的标准试验方法 |
Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference |
| ASTM C 1164-1992 |
来自同一产地的石灰或石灰岩均匀性的评定 |
Evaluation of Limestone or Lime Uniformity from a Single Source |
| ASTM C 675-1991 |
可反复使用的饮料瓶(玻璃容器)上陶瓷装璜耐碱性的试验方法 |
Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers |
| ASTM E 764-1980 |
增殖反应堆芯材料用鉴别试验方法 |
Identifying Test Methods for Breeder Reactor Core Materials |
| ASTM C 724-1991 |
建筑装饰玻璃上陶瓷装璜耐酸性的试验方法 |
Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass |
| ASTM C 695-1991 |
碳和石墨和抗压强度的试验方法 |
Test Method for Compressive Strength of Carbon and Graphite |
| ASTM C 623-1992 |
用共振现象对玻璃和玻璃陶瓷材料的杨氏模量、剪切模量及泊松比的标准试验方法 |
Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance |
| ASTM E 638-1978 |
用窄角黑体辐射设备校准传热速度量热器的方法 |
Test Method for Calibration of Heat Transfer Rate Calorimeters Using a Narrow-Angle Blackbody Radiation Facility |
| ASTM F 716-1982 |
吸收剂的吸收性能试验 |
Standard Methods of Testing Sorbent Performance of Absorbents |
| ASTM D 4932-1989 |
屋面层和防水薄板、屋面卷材、木瓦的抗紧固件斯裂和破裂的试验方法 |
Test Method for Fastener Rupture and Tear Resistance of Roofing and Waterproofing Sheets, Roll Roofing and Shingles |
| ASTM D 4925-1989 |
皮革面层挠性和粘结性的试验方法 |
Test Method for Flexibility and Adhesion of Finish on Leather |
| ASTM D 4924-1989 |
橡胶掺合物用石蜡的分类 |
Classification for Petroleum Waxes for Use in Rubber Compounding |
| ASTM D 1369-1984 |
沥青表面处理用料量的标准操作规程 |
Standard Practice for Quantities of Materials for Bituminous Surface Treatments |
| ASTM D 1542-1960 |
清漆中松香的质量检测的测试方法 |
Test Method for Qualitative Detection of Rosin in Varnishes |
| ASTM E 1023-1984 |
评定材料对水生生物及其使用中存在的危险性的标准指南 |
Standard Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses |
| ASTM F 597-1983 |
用电动打字机对插入业务表格纸中的一次性复写纸的评定的标准规程 |
Standard Practice for Evaluation of One-Time Carbon Paper in Carbon-Interleaved Business Forms by Use of an Electric Typewriter |
| ASTM F 596-1982 |
干静电调色剂的图象特性的比较评定 |
Standard Practice for Comparative Evaluation of the Imaging Properties of Dry Electrostatic Toners |
| ASTM E 1014-1984 |
室外A加权声级测量 |
Standard Guide for Measurement of Outdoor A-Weighted Sound Levels |
| ASTM D 2786-1991 |
高电离电压质谱法分析气体油饱和馏分中烃类的标准试验方法 |
Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry |
| ASTM D 1457-1992 |
聚四氟乙烯模塑及挤压成型物料 |
Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials |
| ASTM D 4438-1985 |
电子计数法对催化材料的粒度分布的试验方法 |
Test Method for Particle Size Distribution of Catalytic Material by Electronic Counting |
| ASTM D 126-1987 |
含铬酸铅和氧化铬绿的黄、橙和绿色颜料的化学分析方法 |
Test Methods for Analysis of Yellow, Orange and Green Pigments Containing Lead Chromate and Chromium Oxide Green |
| ASTM D 4545-1986 |
连接加工的挠性板土工薄膜用工厂接缝完整性测定的标准实施规程 |
Standard Practice for Determining the Integrity of Factory Seams Used in Joining Manufactured Flexible Sheet Geomembranes |
| ASTM B 507-1986 |
机件在支架上电镀的设计的标准实施规程 |
Standard Practice for Design of Articles To Be Electroplated on Racks |
| ASTM E 715-1980 |
重力对流和强制循环水浴锅 |
Gravity-Convection and Forced-Circulation Water Baths |
| ASTM C 454-1983 |
用强碱法测定含碳耐火材料的破碎程度 |
Disintegration of Carbon Refractories by Alkali |
| ASTM C 448-1988 |
工业瓷器瓷漆的耐磨蚀的标准试验方法 |
Standard Test Methods for Abrasion Resistance of Porcelain Enamels |
| ASTM E 219-1980 |
铀燃料中原子裂变百分率的测试方法(放射化学法) |
Test Method for Atom Percent Fission in Uranium Fuel (Radiochemical Method) |
| ASTM D 5198-1992 |
固体废弃物的硝酸处理 |
Nitric Acid Digestion of Solid Waste |
| ASTM D 4323-1984 |
反射系数变化速率法对大气中硫化氢含量的标准试验方法 |
Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance |
| ASTM D 3731-1987 |
地表水中藻类叶绿素含量的测量 |
Measurement of Chlorophyll Content of Algae in Surface Waters |
| ASTM D 3724-1982 |
合成氧化铁棕颜料 |
Synthetic Brown Iron Oxide Pigment |
| ASTM D 3705-1986 |
润滑液起雾性能的标准试验方法 |
Standard Test Method for Misting Properties of Lubricating Fluids |
| ASTM B 760-1986 |
钨板,薄板和箔 |
Tungsten Plate, Sheet and Foil |
| ASTM B 714-1982 |
复合超导体D-C临界电流的试验方法 |
Test Method for D-C Critical Current of Composite Superconductors |
| ASTM B 713-1982 |
有关超导体术语的定义 |
Definitions of Terms Relating to Superconductors |
| ASTM E 531-1976 |
在高温下核组份材料的监视试验 |
Surveillance Testing of High-Temperature Nuclear Component Materials |
| ASTM E 503/E 503M-1988 |
装有对角制动设备的客车在铺砌路面上的防滑试验方法 |
Test Methods for Measurement of Skid Resistance on Paved Surfaces Using a Passenger Vehicle Diagonal Braking Technique |
| ASTM E 1084-1986 |
用阳光测试薄板材料的太阳能传递性(地面上)的试验方法 |
Test Method for Solar Transmittance (Terrestrial) of Sheet Materials Using Sunlight |
| ASTM D 1461-1985 |
沥青铺砌混合料中水份或挥发性馏份含量的标准试验方法 |
Standard Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures |
| ASTM D 1460-1986 |
橡胶性能的测试方法.液体浸没期间的长度变化 |
Standard Test Method for Rubber Property - Change in Length During Liquid Immersion |
| ASTM D 1456-1986 |
橡胶特性的测试方法.特定应力下的延伸 |
Standard Test Method for Rubber Property - Elongation at Specific Stress |
| ASTM D 1455-1987 |
乳化地板抛光剂60度镜面光泽度的试验方法 |
Test Method for 60 Degree Specular Gloss of Emulsion Floor Polish |
| ASTM C 325-1981 |
卫生陶瓷粘土湿筛析试验方法 |
Test Method for Wet Sieve Analysis of Ceramic Whiteware Clays |
| ASTM C 324-1982 |
卫生陶瓷粘土中游离水的试验方法 |
Test Method for Free Moisture in Ceramic Whiteware Clays |
| ASTM F 572-1989 |
财政研究机构用安全照相机的应用 |
Application of Film Security Cameras in Financial Institutions |
| ASTM F 1104-1987 |
贮藏稳定性检验用液态及水基的飞行器清洗化合物制备的试验方法 |
Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base for Storage Stability Testing |
| ASTM F 1151-1988 |
薄膜打字色带硬度变化的试验方法 |
Test Method for Determining Variations in Hardness of Film Ribbon Pancakes |
| ASTM F 1139-1988 |
蒸汽疏水阀和排水管 |
Standard Specification for Steam Traps and Drains |
| ASTM B 767-1988 |
用重量分析法和其它化学分析法测定电沉积涂层及相关涂层单位面积的质量 |
Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures |
| ASTM D 3337-1991 |
小型滚珠轴承中润滑脂使用寿命和转矩测定的标准试验方法 |
Standard Test Method for Determining Life and Torque of Lubricating Greases in Small Ball Bearings |
| ASTM C 410-1960 |
工业用地面砖 |
Standard Specification for Industrial Floor Brick |
| ASTM E 776-1987 |
回收废燃料中各种形态氯的标准测试方法 |
Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel |
| ASTM E 713-1988 |
米制建筑图纸标度的选择 |
Standard Guide for Selection of Scales for Metric Building Drawings |
| ASTM E 712-1980 |
太阳能加热和制冷系统中贮存液体用金属容器材料的实验室遮蔽 |
Standard Practice for Laboratory Screening of Metallic Containment Materials for Use With Liquids in Solar Heating and Cooling Systems |
| ASTM E 711-1987 |
用弹式量热计测量废弃物中回收燃料的总热量值的标准试验方法 |
Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter |
| ASTM F 583-1982 |
光致抗蚀剂的清洁度-可滤过性的试验方法 |
Test Method for Photoresist Cleanness - Filterability |
| ASTM F 582-1978 |
无机污染物分析用光致抗蚀剂的制备 |
Preparation of Photoresist for Analysis of Inorganic Contaminants |
| ASTM F 581-1978 |
光致抗蚀剂的加速老化 |
Accelerated Aging of Photoresist |
| ASTM F 580-1978 |
绑线连接时可粘性膜同衬底的粘结强度的试验方法 |
Test Method for Adhesion Strength of Bondable Films to Substrates in Ribbon-Wire Bonds |
| ASTM B 766-1986 |
镉电沉积涂层标准规范 |
Standard Specification for Electrodeposited Coatings of Cadmium |
| ASTM E 643-1984 |
金属薄钢板材料喷丸冲压变形的测试方法 |
Standard Test Method for Ball Punch Deformation of Metallic Sheet Material |
| ASTM E 702-1985 |
城市废铁 |
Municipal Ferrous Scrap |
| ASTM E 701-1980 |
城市废铁的试验方法 |
Test Methods of Testing Municipal Ferrous Scrap |
| ASTM E 1049-1985 |
疲劳分析的周期计数标准实施规程 |
Standard Practices for Cycle Counting in Fatigue Analysis |
| ASTM F 636-1985 |
电子元件及微电子元件封装用传递模塑化合物材料性能试验的选择 |
Selection of Tests for Material Properties of Transfer Molding Compounds for Electronic and Microelectronic Encapsulation |
| ASTM B 319-1991 |
电镀用铅和铅合金的制备 |
Standard Guide for Preparation of Lead and Lead Alloys for Electroplating |
| ASTM E 682-1992 |
液相色谱法术语和相互关系的标准实施规程 |
Standard Practice for Liquid Chromatography Terms and Relationships |
| ASTM C 501-1984 |
用泰伯磨损机测定未上釉瓷砖的相对耐磨力的标准试验方法 |
Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser |
| ASTM F 1094-1987 |
用直接加压分接抽样阀和用预先消毒塑料包法对电子和微电子器件加工用水微生物监测的测试方法 |
Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method |
| ASTM D 116-1986 |
电气设备用上釉陶瓷材料的试验 |
Testing Vitrified Ceramic Materials for Electrical Applications |
| ASTM C 385-1958 |
搪瓷器具抗热冲击性的试验方法 |
Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils |
| ASTM C 375-1958 |
搪瓷研磨用水的分类 |
Classification of Water Used in Milling of Porcelain Enamel |
| ASTM D 2351-1990 |
从可还原溶剂型涂料分离出的白色颜料中硫化物的标准试验方法 |
Standard Test Method for Sulfide in White Pigment Separated from Solvent-Reducible Paints |
| ASTM D 2350-1990 |
从可还原溶剂型涂料分离出的白色颜料中氧化锑的试验方法 |
Test Method for Antimony Oxide in White Pigment Separated from Solvent-Reducible Paints |
| ASTM D 2349-1990 |
溶剂可还原的涂料中溶剂组份特性的定性测定标准试验方法 |
Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints |
| ASTM B 648-1978 |
用巴氏压痕仪测定铝合金压痕硬度的标准试验方法 |
Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor |
| ASTM B 647-1984 |
用维氏硬度仪测定铝合金压痕硬度的试验方法 |
Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage |
| ASTM F 1113-1987 |
钢中可扩散氢的电化学测量标准试验方法(Barnacle 电极) |
Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode) |
| ASTM D 3789-1979 |
家用喷漆罐贴实用标签 |
Pracitice for Labeling Cans of Consumer Spray Paint |
| ASTM E 577-1985 |
直线建筑构件及系统的尺寸协调规格 |
Standard Guide for Dimensional Coordination of Rectilinear Building Parts and Systems |
| ASTM E 576-1988 |
立式密封绝缘玻璃装置结霜点的标准试验方法 |
Standard Test Method for Frost Point of Sealed Insulating Glass Units in the Vertical Position |
| ASTM E 433-1971 |
液体渗透检查用参考图片 |
Reference Photographs for Liquid Penetrant Inspection |
| ASTM E 429-1978 |
用积分球仪测量和计算金属表面反射性的试验方法 |
Test Method for Measurement and Calculation of Reflecting Characteristics of Metallic Surfaces Using Integrating Sphere Instruments |
| ASTM E 423-1971 |
升温时非传导样品的正常光谱发射试验方法 |
Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens |
| ASTM D 1366-1986 |
颜料粒度特性报告 |
Reporting Particle Size Characteristics of Pigments |
| ASTM F 1074-1987 |
焊接喇叭型绳栓 |
Standard Specification for Cleats, Welded Horn Type |
| ASTM A 338-1984 |
铁路,船舶和其他重型装备在温度达到650华氏度(345摄氏度)时使用的可锻铸铁法兰,管件和阀门零件 |
Malleable Iron Flanges, Pipe Fittings and Valve Parts for Railroad, Marine and Other Heavy Duty Service at Temperatures up to 650 Degrees F (345 Degrees C) |
| ASTM E 421-1988 |
高纯度铁中硅和铝含量的光谱测定的试验方法 |
Test Method for Spectrographic Determination of Silicon and Aluminum in High-Purity Iron |
| ASTM E 408-1971 |
用监测仪技术测定表面正常总辐射的试验方法 |
Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques |
| ASTM G 71-1981 |
电解液中电流腐蚀测试的实施和评定 |
Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes |
| ASTM D 1394-1976 |
钛白颜料的化学分析的标准试验方法 |
Standard Test Methods for Chemical Analysis of White Titanium Pigments |
| ASTM C 686-1990 |
矿质纤维绒及毡式绝热材料的分离强度的标准试验方法 |
Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation |
| ASTM B 613-1976 |
滑动电触点用复合材料的微型电刷制备规范 |
Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts |
| ASTM F 701-1981 |
神经外科用植入物及仪器的保养及管理 |
Care and Handling of Neurosurgical Implants and Instruments |
| ASTM A 367-1960 |
铸铁的激冷的标准试验方法 |
Standard Test Methods of Chill Testing of Cast Iron |
| ASTM E 599-1989 |
造纸工业用杀粘菌剂效力的试验方法-真菌粘菌 |
Test Method for Efficacy of Slimicides for the Paper Industry - Fungal Slime |
| ASTM C 492-1992 |
粒状烧焦耐火白云石的水合作用的试验方法 |
Test Method for Hydration of Granular Dead-Burned Refractory Dolomite |
| ASTM D 83-1984 |
铅丹颜料 |
Red Lead Pigment |
| ASTM D 61-1975 |
硬沥青的软化点的试验方法(水中方块试验法) |
Standard Test Method for Softening Point of Pitches (Cube-in-Water Method) |
| ASTM E 191-1964 |
微量测量有机及有机金属化合物中碳和氢含量用仪器的标准规范 |
Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds |
| ASTM D 5115-1990 |
测定RDF的燃料质量和采集大量样品的试验方法 |
Test Method for Collecting Gross Samples and Determining the Fuel Quality of RDF |
| ASTM D 2976-1971 |
泥炭材料PH值的试验方法 |
Test Method for pH of Peat Materials |
| ASTM D 2973-1971 |
泥炭材料中总氮的标准试验方法 |
Standard Test Method for Total Nitrogen in Peat Materials |
| ASTM D 5232-1992 |
测定固体的,类似固体的,或液体废弃物成分稳定性和可混合性的标准试验方法 |
Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material |
| ASTM E 781-1986 |
暴露在有盖板的太阳能收集器中模拟滞流的条件下太阳能存储器材料的吸收性评定 |
Evaluating Absorptive Solar Receiver Materials When Exposed to Conditions Simulating Stagnation in Solar Collectors with Cover Plates |
| ASTM B 253-1987 |
电镀用铝合金的制备标准指南 |
Standard Guide for Preparation of Aluminum Alloys for Electroplating |
| ASTM D 5368-1993 |
固体废弃物样品中溶剂可萃取总含量的重量分析测定试验方法 |
Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples |
| ASTM C 959-1991 |
辐射热防护物 |
Radiant Heat Fill |
| ASTM C 1050-1991 |
刚性蜂窝状聚氨基甲酸乙酯--纤维素纤维组合屋面绝缘材料 |
Rigid Cellular Polystyrene-Cellulosic Fiber Composite Roof Insulation |
| ASTM C 891-1990 |
地下预制混凝土公用设施装配 |
Installation of Underground Precast Concrete Utility Structures |
| ASTM D 3825-1990 |
快速气泡法测定动态表面张力的标准试验方法 |
Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique |
| ASTM D 4424-1990 |
气相色谱法分析丁烯的标准试验方法 |
Standard Test Method for Butylene Analysis by Gas Chromatography |
| ASTM E 1273-1988 |
可重复使用的实验室移液管的色标 |
Color Coding of Reusable Laboratory Pipets |
| ASTM E 1222-1990 |
管子护套装置安放损耗的实验室测量用试验方法 |
Test Method for the Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems |
| ASTM D 3293-1991 |
聚四氟乙烯树脂模压薄板 |
PTFE Resin Molded Sheet |
| ASTM D 3266-1991 |
大气中粒状物及酸性气态氟化物自动分离及收集的标准试验方法(双纸带取样法) |
Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method) |
| ASTM D 5241-1992 |
水中挥发的和类似挥发有机化合物分析用水的微量萃取法的标准操作规程 |
Standard Practice for Micro-Extraction of Water for Analysis of Volatile and Semi-Volatile Organic Compounds in Water |
| ASTM D 5233-1992 |
废弃物单批量抽取法的标准试验方法 |
Standard Test Method for Single Batch Extraction Method for Wastes |
| ASTM D 5076-1990 |
屋顶层和防水膜中孔隙的测试方法 |
Test Method for Measuring Voids in Roofing and Waterproofing Membranes |
| ASTM D 5070-1990 |
采用电位滴定法的织物软化剂中合成季胺盐的标准试验方法 |
Standard Test Method for Synthetic Quaternary Ammonium Salts in Fabric Softeners by Potentiometric Titrations |
| ASTM E 1287-1989 |
生物材料的无菌取样 |
Aseptic Sampling of Biological Materials |
| ASTM F 1310-1990 |
65加仑配药罐 |
65-Gallon Dispensing Tank |
| ASTM F 1312-1990 |
高温隔热耐火粘土砖的标准规范 |
Standard Specification for Brick, Insulating, High Temperature, Fire Clay |
| ASTM E 352-1993 |
工具钢及其它类似中合金钢和高合金钢化学分析的标准试验方法 |
Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels |
| ASTM E 345-1993 |
金属箔的抗拉试验方法 |
Test Methods of Tension Testing of Metallic Foil |
| ASTM D 3650-1993 |
用萤光分析法比较水中石油润滑油的方法 |
Test Method for Comparison of Waterborne Petroleum Oils by Fluorescence Analysis |
| ASTM D 1767-1989 |
肥皂或合成洗涤剂中乙二胺四乙酸盐(EDTA)含量的标准测试方法 |
Standard Test Method for Ethylene Diamine Tetraacetate (EDTA) in Soaps or Synthetic Detergents |
| ASTM D 1864-1989 |
组合屋面用矿物集料中水分的标准测试方法 |
Standard Test Method for Moisture in Mineral Aggregate Used on Built-Up Roofs |
| ASTM D 3598-1989 |
合成清洁剂中柠檬酸酯的标准测试方法 |
Standard Test Method for Citrate in Synthetic Detergents |
| ASTM D 1946-1990 |
用气相色谱法作重整气分析 |
Analysis of Reformed Gas by Gas Chromatography |
| ASTM D 3556-1985 |
在机械洗碟过程中污物在玻璃器皿上沉积的试验方法 |
Test Method for Deposition on Glassware During Mechanical Dishwashing |
| ASTM D 3674-1989 |
碳黑相对挤压质量的试验方法 |
Test Method for Carbon Black - Relative Extrusion Mass |
| ASTM D 5215-1993 |
乙烯类制品铺地板用胶粘剂着色的仪器评定的试验方法 |
Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives |
| ASTM D 3601-1988 |
水介质中泡沫的标准试验方法(瓶试法) |
Standard Test Method for Foam In Aqueous Media (Bottle Test) |
| ASTM D 5390-1993 |
Palmer-Bowlus量水槽测量水的明渠流量的标准试验方法 |
Standard Test Method for Open-Channel Flow Measurement of Water with Palmer-Bowlus Flumes |
| ASTM D 1992-1991 |
橡胶用合成增塑剂试验 |
Testing Synthetic Plasticizers Used in Rubber |
| ASTM D 1986-1991 |
聚乙烯蜡的表观粘度测量的测试方法 |
Test Method for Determining the Apparent Viscosity of Polyethylene Wax |
| ASTM B 664-1990 |
含80%银20%石墨的滑动电接触材料标准规范 |
Standard Specification for 80 % Silver-20 % Graphite Sliding Contact Material |
| ASTM D 4039-1993 |
高光泽表面反射光雾的试验方法 |
Standard Test Method for Reflection Haze of High-Gloss Surfaces |
| ASTM D 4033-1992 |
家俱装饰织物接缝抗纱滑移的标准试验方法(动态疲劳试验法) |
Standard Test Method for Resistance to Yarn Slippage at the Sewn Seam in Upholstery Fabrics (Dynamic Fatigue Method) |
| ASTM D 4651-1993 |
异丁烷热物理性能表 |
Standard Specification for Isobutane Thermophysical Property Tables |
| ASTM D 5351-1993 |
用萃取滴定法(试验方法B)测定有机结合的三氧化硫的试验方法 |
Test Method for Determination of Organically Combined Sulfuric Anhydride by Extraction Titration, Test Method B |
| ASTM D 5323-1992 |
聚乙烯土工隔膜用2%割线系数的测定的标准操作规程 |
Standard Practice for Determination of 2 % Secant Modulus for Polyethylene Geomembranes |
| ASTM D 5283-1992 |
有关废物管理工作的环境数据生成的标准实施规程:质量保证和质量控制的计划及实施 |
Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation |
| ASTM F 1376-1992 |
气体分配系统元部件的金相分析 |
Metalllurgical Analysis for Gas Distribution System Components |
| ASTM E 714-1994 |
一次性玻璃制血清吸管的标准规范 |
Standard Specification for Disposable Glass Serological Pipets |
| ASTM E 677-1994 |
可互换的圆球形接头 |
Standard Specification for Interchangeable Spherical Ground Joints |
| ASTM E 670-1994 |
用微米测微计(Mu-Meter)测定铺砌路面的侧向摩擦力的测试方法 |
Standard Test Method for Side Force Friction on Paved Surfaces Using the Mu-Meter |
| ASTM B 324-1993 |
电气用矩形和方形铝线标准规范 |
Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes |
| ASTM C 134-1995 |
耐火砖和绝热耐火砖的尺寸、尺寸测量和松装密度的标准试验方法 |
Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick |
| ASTM D 5555-1995 |
脂肪水溶液和加脂化合物中使用的动物、海生动物及植物性脂肪和油所含游离脂肪酸测定的标准试验方法 |
Standard Test Method for Determination of Free Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils Used in Fat Liquors and Stuffing Compounds |
| ASTM D 5474-1993 |
地下水调查数据元选择标准导则 |
Standard Guide for Selection of Data Elements for Ground-Water Investigations |
| ASTM D 5473-1993 |
控制井部分渗透效应分析和无泄漏封闭蓄水层的水平和垂直液力传导性测定标准试验方法 |
Standard Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer |
| ASTM D 5472-1993 |
在控制井上测定比容和评定过滤系数的标准试验方法 |
Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well |
| ASTM D 5468-1995 |
废弃材料的总热值和灰值的标准试验方法 |
Standard Test Method for Gross Calorific and Ash Value of Waste Materials |
| ASTM F 1426-1994 |
疲劳使用引起的疲劳外胎表面不规则磨损花纹的鉴别 |
Standard Practice for Identifying Tire Tread Surface Irregular Wear Patterns Resulting from Tire Use |
| ASTM C 408-1988 |
卫生陶瓷制品传热性的试验方法 |
Test Method for Thermal Conductivity of Whiteware Ceramics |
| ASTM A 499-1989 |
丁字钢轨轧制碳素钢条及型材的标准规范 |
Standard Specification for Steel Bars and Shapes, Carbon Rolled from "T" Rails |
| ASTM F 551-1989 |
测试轮胎用标准直径[67.23英寸(1.707m)]的实验室试验车轮 |
Using a Nominal 67.23- in. (1.707-m) Diameter Laboratory Test Roadwheel in Testing Tires |
| ASTM D 887-1982 |
水沉积物抽样的标准操作规程 |
Standard Practices for Sampling Water-Formed Deposits |
| ASTM D 869-1985 |
涂漆沉降程度评价试验方法 |
Test Method for Evaluating Degree of Settling of Paint |
| ASTM D 711-1989 |
路标漆不粘着时间的试验方法 |
Test Method for No-Pick-up Time of Traffic Paint |
| ASTM D 4468-1985 |
用还原法和比色法对气体燃料中总硫含量的试验方法 |
Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry |
| ASTM D 3766-1986 |
催化剂和催化作用的相关术语 |
Standard Terminology Relating to Catalysts and Catalysis |
| ASTM D 3802-1979 |
活性碳的球盘硬度的试验方法 |
Standard Test Method for Ball-Pan Hardness of Activated Carbon |
| ASTM D 3790-1979 |
用烘干箱烘干皮革中易挥发物质(水份)的试验方法 |
Test Method for Volatile Matter (Moisture) of Leather by Oven Drying |
| ASTM C 925-1979 |
非塑性陶瓷粉末的精密电铸湿筛分析的试验方法 |
Test Method for Precision Electroformed Wet Sieve Analysis of Nonplastic Ceramic Powders |
| ASTM D 4581-1986 |
水体表面的形态学特性的测定 |
Measurement of Morphologic Characteristics of Surface Water Bodies |
| ASTM D 4576-1986 |
蓝色原料(皮革)抗霉菌生长的试验方法 |
Test Method for Mold Growth Resistance of Blue Stock (Leather) |
| ASTM D 3832-1979 |
太阳能系统中同液体接触的橡胶密封件规格 |
Rubber Seals Contacting Liquids in Solar Energy Systems |
| ASTM D 4012-1981 |
水中微生物的三磷酸腺甙含量的试验方法 |
Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water |
| ASTM E 307-1972 |
升高温度时标准光谱发射的试验方法 |
Test Method for Normal Spectral Emittance at Elevated Temperatures |
| ASTM B 294-1992 |
硬质合金硬度的测试方法 |
Test Method for Hardness Testing of Cemented Carbides |
| ASTM B 254-1992 |
不锈钢的制备及电镀的标准规程 |
Standard Practice for Preparation of and Electroplating on Stainless Steel |
| ASTM D 1410-1965 |
固定卧式油槽的测量和校准 |
Measurement and Calibration of Stationary Horizontal Tanks (Available as Separate Reprint Only) |
| ASTM E 904-1987 |
太阳能收集器用全天热性能数据的形成 |
Generating All-Day Thermal Performance Data for Solar Collectors |
| ASTM E 897-1988 |
回收废燃料分析样品中挥发性物质的测试方法 |
Test Method for Volatile Matter in the Analysis Sample of Refuse-Derived Fuel |
| ASTM E 894-1988 |
建筑物用永久性金属围栏系统及围栏的锚定试验 |
Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings |
| ASTM E 901-1982 |
铀资源的分类系统 |
Standard Classification System for Uranium Resources |
| ASTM C 703-1972 |
铝制搪瓷涂层的抗脱落试验方法 |
Test Methods for Spalling Resistance of Porcelain Enameled Aluminum |
| ASTM F 1079-1987 |
外科镶刃与不镶刃剪标准规范 |
Standard Specification for Inserted and Noninserted Surgical Scissors |
| ASTM B 732-1984 |
评定焊剂对铜管系统腐蚀性的测试方法 |
Test Method for Evaluating the Corrosivity of Solder Fluxes for Copper Tubing Systems |
| ASTM D 3637-1984 |
沥青混合物渗透率的试验方法 |
Test Methods for Permeability of Bituminous Mixtures |
| ASTM D 1434-1982 |
测定塑料薄膜和薄片透气性能的测试方法 |
Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting |
| ASTM C 743-1987 |
搪瓷涂层连续性的标准试验方法 |
Standard Test Method for Continuity of Porcelain Enamel Coatings |
| ASTM B 602-1988 |
金属及无机涂层的属性抽样试验方法 |
Test Method for Attribute Sampling of Metallic and Inorganic Coatings |
| ASTM B 754-1989 |
铜及铜合金带材平面偏差的测量和记录的测试方法 |
Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip |
| ASTM G 31-1972 |
金属的实验室浸渍腐蚀试验 |
Laboratory Immersion Corrosion Testing of Metals |
| ASTM E 434-1971 |
用太阳模拟装置作阳光吸收与半球发光量的比率及半球发光量的热量计测定的试验方法 |
Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation |
| ASTM D 4096-1991 |
空气中悬浮粒子的测定方法(大容器取样器法) |
Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method) |
| ASTM A 159-1983 |
汽车用灰铁铸件 |
Automotive Gray Iron Castings |
| ASTM D 4403-1984 |
岩石用变形计 |
Extensometers Used in Rock |
| ASTM E 1123-1986 |
海军和航海船舶舱壁处理材料的声传输损失试验用试样的安装 |
Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials |
| ASTM F 691-1980 |
测量平面度偏差用光板的制备 |
Preparing Photoplates for Measuring Flatness Deviation |
| ASTM F 690-1986 |
热塑性压力管道灌溉系统的地下安装标准规程 |
Standard Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems |
| ASTM B 558-1979 |
电镀用镍合金的制备 |
Preparation of Nickel Alloys for Electroplating |
| ASTM E 680-1979 |
固态危险物的滴重冲击敏感度的试验方法 |
Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials |
| ASTM E 674-1980 |
工业用多孔板及筛(圆孔系列)的标准规范 |
Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series) |
| ASTM E 672-1987 |
易处置的玻璃微量滴管 |
Disposable Glass Micropipets |
| ASTM E 546-1988 |
密封绝缘玻璃组件霜点的试验方法 |
Standard Test Method for Frost Point of Sealed Insulating Glass Units |
| ASTM E 1037-1984 |
测定回收废燃料的粒度分布 |
Measuring Particle Size Distribution of RDF-5 |
| ASTM E 1096-1986 |
实验室玻璃分液漏斗 |
Laboratory Glass Separatory Funnels |
| ASTM B 681-1988 |
用光截面显微镜测量铝阳极镀层厚度及不透明表面的其它透明涂层厚度的试验方法 |
Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Transparent Coatings on Opaque Surfaces Using the Light-Section Microscope |
| ASTM D 2449-1988 |
天然橡胶包上橡胶覆层的极限值 |
Standard Specification for Rubber Bales From Natural Sources - Limit on Coating |
| ASTM D 2442-1975 |
电气和电子设备用矾土陶瓷 |
Alumina Ceramics for Electrical and Electronic Applications |
| ASTM B 200-1985 |
钢及铁合金表面铅和铅锡合金的电解沉积镀层标准规范 |
Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys |
| ASTM D 1762-1984 |
木炭的化学分析 |
Chemical Analysis of Wood Charcoal |
| ASTM F 605-1988 |
当夹在同一多份打印材料中时测定一次性复写纸与无碳复印纸的兼容性的标准规程 |
Standard Practice for Determining Compatibility of One-Time Carbon Paper with Carbonless Copy Papers When Interleaved into the Same Manifold Set |
| ASTM F 680-1980 |
钉子的试验方法 |
Standard Test Methods for Nails |
| ASTM B 680-1980 |
用酸溶解法测定铝的阳极镀层封闭质量的试验方法 |
Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution |
| ASTM E 1089-1986 |
均匀静气压差下平板太阳能收集器透水性的标准试验方法 |
Standard Test Method for Water Penetration of Flat Plate Solar Collectors by Uniform Static Air Pressure Difference |
| ASTM D 2434-1968 |
在常水头压力下颗粒状土壤渗水率的标准试验方法 |
Standard Test Method for Permeability of Granular Soils (Constant Head) |
| ASTM E 212-1966 |
用杆对杆技术对碳素钢及低合金钢做光谱分析的方法 |
Method for Spectrographic Analysis of Carbon and Low-Alloy Steel by the Rod-to-Rod Technique |
| ASTM E 293-1968 |
用溶解技术测定低合金钢中酸溶性铝的光谱分析试验法 |
Method for Spectrographic Determination of Acid-Soluble Aluminum in Low-Alloy Steel by the Solution Technique |
| ASTM E 73-1983 |
桁架组件的静态载荷试验 |
Standard Practice for Static Load Testing of Truss Assemblies |
| ASTM D 1874-1962 |
纤维板船运箱顶盖自动机密封用水可溶或溶剂可溶的液体胶粘剂 |
Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases |
| ASTM C 762-1986 |
高温下用喷制纤维热绝缘材料应用规程 |
Application of Spray-Applied Fibrous Thermal Insulation for Elevated Temperatures |
| ASTM C 829-1981 |
用梯度炉法测量玻璃的液化温度的规程 |
Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method |
| ASTM D 2674-1972 |
铝表面准备用硫代铬酸盐蚀刻溶液分析的标准试验方法 |
Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum |
| ASTM D 1666-1987 |
进行木材和木基材料的机械切削试验的标准试验方法 |
Standard Test Methods for Conducting Machining Tests of Wood and Wood-Base Materials |
| ASTM D 2725-1987 |
天然气中硫化烃的测试方法(亚甲蓝法) |
Test Method for Hydrogen Sulfide in Natural Gas (Methylene Blue Method) |
| ASTM A 873/A 873M-1987 |
压力容器用铬钼合金钢薄板和带材 |
Steel Sheet and Strip, Chromium-Molybdenum Alloy for Pressure Vessels |
| ASTM D 1409-1965 |
油槽车油槽的测量和校正 |
Measurement and Calibration of Tank Car Tanks (Available as Separate Reprint Only) |
| ASTM D 1408-1965 |
球形和扁球形油槽的测量和校准(只适用于单行本) |
Measurement and Calibration of Spherical and Spheroidal Tanks (Available as a Separate Reprint Only) |
| ASTM D 1407-1965 |
驳船油槽的测量和校准(只适用于单行本) |
Measurement and Calibration of Barge Tanks (Available as Separate Reprint Only) |
| ASTM D 1406-1965 |
油箱的液体校准(只适用于单行本) |
Liquid Calibration of Tanks (Available as Separate Reprint Only) |
| ASTM E 295-1982 |
测量油扩散泵速度的试验方法 |
Standard Test Method for Measured Speed of Oil Diffusion Pumps |
| ASTM A 718-1975 |
多片样品表面绝缘电阻率的测试方法 |
Test Method for Surface Insulation Resistivity of Multi-Strip Specimens |
| ASTM B 201-1980 |
锌和镉的表面铬酸盐覆层试验 |
Testing Chromate Coatings on Zinc and Cadmium Surfaces |
| ASTM C 760-1990 |
核纯级银铟镉合金的化学及光谱化学分析方法 |
Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys |
